Windows Support Forum

Network adapter properties

Q: Network adapter properties

I Network adapter properties could really use some help I have figured out what is causing my issue and will explain the best I can Relatively new network with wired desktop and wireless laptop through Netgear router I narrowed the issue down to Power Management of Network adapter properties the Wireless Network Adapter If the Wireless Network Adapter is set to its default properties including Power Management-- gt Allow the computer to turn off this device to save power when I fire up the laptop it connects right away but the problem is the Network Map is not correct the laptop doesn't show it's information including IPv If I manually uncheck and recheck the TCP Network adapter properties IPv box under Networking the network disconnects and reconnects and the map is good with the laptop showing its IPv address But if it goes back to sleep the next time it wakes Network adapter properties up and connects the map will be wrong So if I disable Power Management-- gt Allow this computer to turn off this device to save power the network map appears correct and the laptop shows it's IPv info problem is and it's a big one it takes one to two minutes to connect to the router So either I live with the wrong Network Map everything still is networked as I am using Homegroup or I live with a delayed connection to my wireless but the Network Map is correct This is a new laptop and I already reinstalled the Wireless Adapter there are no updates to the drivers I'm tempted to to do something related to TCP IP Perhaps reset it to default since there does seem to be some relationship to the IPv setting But I just don't know what to do at this point I'd really appreciate any help

Relevancy 100%
Preferred Solution: Network adapter properties

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Network adapter properties

Turn off that option to allow it to turn off the WiFi. If the system goes to sleep the WiFi will be turned off with it. If you are using the system you certainly don't want the WiFi to be turned off.

http://www.sevenforums.com/network-sharing/249807-network-adapter-properties.html
Relevancy 71.38%

When I click on the properties tab for my NIC in Workstation 4.0 I get "cannot configure software component" message, how do I resolve this? I am trying to figure out my network settings. IE: Full or Half Duplex.
 

A:Network Adapter Properties {Moved to Networking}

This isn't a tip or trick. I'm going to transfer this over to the Networking forum.
Check for updates there

Well, I can't seem to move it. I've alerted TechGuy and this thread will be moved shortly.

[This message has been edited by ich (edited 08-29-2000).]
 

https://forums.techguy.org/threads/network-adapter-properties-moved-to-networking.29049/
Relevancy 70.52%

Whenever I select my wireless adapter right click and choose quot Properties quot the properties window freezes and results Viewing freezing. properties network adapter a in along with Viewing a network adapter properties results in freezing. it the explorer Viewing a network adapter properties results in freezing. window Some time ago I had disabled a bunch of services some of which were related to networking I had done so because they were causing intensive CPU use problems while they were being loaded I realize now I should of set them to manual and I have set as many as I can remember to manual but the problem still exist Is there something else I could try to undo this problem and aside from this everything else works fine with no internet or network problems nbsp nbsp Quote Originally Posted by vpwin Name --Description ----Status ------Startup Type --------Log On As ActiveX Installer AxInstSV --Provides User Account Control validation for the installation of ActiveX controls from the Internet and enables management of ActiveX control installation based on Group Policy settings This service is started on demand and if disabled the installation of ActiveX controls will behave according to default browser settings ------Manual --------Local System Adaptive Brightness --Monitors ambient light sensors to detect changes in ambient light and adjust the display brightness If this service is stopped or disabled the display brightness will not adapt to lighting conditions ------Manual --------Local Service Adobe LM Service --AdobeLM Service ------Manual --------Local System Akamai NetSession Interface --Provides networking protocol and file transfer technologies If the service is stopped those applications that depend on the service may fail to transfer files or otherwise function properly ----Started ------Automatic --------Local System Apple Mobile Device --Provides the interface to Apple mobile devices ----Started ------Automatic --------Local System Application Experience --Processes application compatibility cache requests for applications as they are launched ----Started ------Manual --------Local System Application Identity --Determines and verifies the identity of an application Disabling this service will prevent AppLocker from being enforced ------Manual --------Local Service Application Information --Facilitates the running of interactive applications with additional administrative privileges If this service is stopped users will be unable to launch applications with the additional administrative privileges they may require to perform desired user tasks ----Started ------Manual --------Local System Application Layer Gateway Service --Provides support for rd party protocol plug-ins for Internet Connection Sharing ----Started ------Manual --------Local Service avast Antivirus --Manages and implements avast antivirus services for this computer This includes the resident protection the virus chest and the scheduler ----Started ------Automatic --------Local System Background Intelligent Transfer Service --Transfers files in the background using idle network bandwidth If the service is disabled then any applications that depend on BITS such as Windows Update or MSN Explorer will be unable to automatically download programs and other information ----Started ------Manual --------Local System Base Filtering Engine --The Base Filtering Engine BFE is a service that manages firewall and Internet Protocol security IPsec policies and implements user mode filtering Stopping or disabling the BFE service will significantly reduce the security of the system It will also result in unpredictable behavior in IPsec management and firewall applications ----Started ------Automatic --------Local Service BitLocker Drive Encryption Service --BDESVC hosts the BitLocker Drive Encryption service BitLocker Drive Encryption provides secure startup for the operating system as well as full volume encryption for OS fixed or removable volumes This service... Read more

A:Viewing a network adapter properties results in freezing.

Can you share with us your list of services, and if they are enabled/manual/disabled or whatever. We may notice one more that might need to be enabled.

Once that's ruled out we can look at other causes? Any suggestions any1?

http://www.sevenforums.com/network-sharing/91559-viewing-network-adapter-properties-results-freezing.html
Relevancy 69.66%

Hi,

I recently updated the driver for this network adapter, went from version 18.8 to 21.0. When I go to Device Manager > Network Adapters > Intel Ethernet Connection I217-V, it seems like the properties window for that adapter takes about 5-6 seconds to open and certain tabs like General/Link Speed/Advanced/Power Management/Teaming/VLANs take a few seconds to load after clicking on them.

Is this normal? I can't remember if the window for this adapter was faster loading on previous versions of the driver.

http://www.sevenforums.com/drivers/397706-intel-i217-v-network-adapter-properties-slow-open.html
Relevancy 69.66%

I am running Windows 7 Ultimate, SP1, on an HP G60-120US laptop.  I have an Atheros AR5009 wireless adapter.
I have no problems with internet access.  However, in Network and Sharing Center I left click on "change adapter settings", right click on Wireless Network Connection, and then left click on Properties I get an error box that says "An unexpected error occurred."  I tried to do a clean boot using MSCONFIG but that did not work.  I tried to uncheck the "Load startup items" box but after restarting it was shaded solid again.  I then tried to check the "Diagnostic Startup" radio button and then click on "apply" but it jumps right back to selective startup.  Can you please help me clean my laptop?
 
 

http://www.bleepingcomputer.com/forums/t/603920/cant-change-wireless-adapter-properties-in-network-connections-windows-7/
Relevancy 69.23%

i am creating a local network of just 2 PCs. 1st one is using windows 7 OS and the 2nd one is using windows 8.1 . Error i am facing is when i click on TCP/IP(v4) properties in 2nd PC(win 8.1 pc) it says that ""In order to configure TCP/IP, you
must install and enable a network adapter card.". 1st pc is working fine and showing shared drives and files in network but 2nd PC is not showing anything in network because id donot allow me to configure IP settings. 
Please Note that i have also connected WiFi connection to my 2nd PC and that connection is working fine and showing all the TCP/IP Properties correctly without showing any error. 
I have disabled Network adapter in Device manager and installed again but nothing happens. 
Help me in this Please
Thank you!!

https://social.technet.microsoft.com/Forums/en-US/2990769a-8c77-41b4-9f7a-3dc0ae0c39e7/error-while-opening-local-network-properties-in-windows-81-ampquotin-order-to-configure-tcpip?forum=w8itpronetworking
Relevancy 55.04%

I have dell laptop.Everytime I try to change ip address of wifi through network and sharing center(adapter properties), I get this message

"Some of the controls of this property sheet are disabled because one or more other Network property sheets are already open, to use these controls close all other opened property sheets and then reopen this one" .

I have tried reinstalling dw1501 drivers but to no avail. The properties though open in safe mode. I have also scanned for virus/alware and have found none.

please suggest any other way to resolve the situation

Kindly help
Thanks
Jose

A:cant accesss adapter properties

Have you attempted to access 192.168.0.1? It will take you directly to the login screen for your router, which should give you more flexibility and power.

http://www.bleepingcomputer.com/forums/t/469811/cant-accesss-adapter-properties/
Relevancy 55.04%

I have a "VIA Rhine II Fast Ethernet Adapter" and I suspect i'm not geting it's full potential. In it's properties->Advanced tabs there are properties and values for:

Adaptive interupt (enabled),
connection type (auto-negotiation),
flow control (disabled),
network address,
receive buffers (set to 64),
transmit bufers (also set to 64), and
wake up time (os controlled).

I have a Cable connection (100 Mbps but limit set to 50kb/s download) and windows xp pro.

I would like to know what these values should be for optimal performance.
 

Relevancy 55.04%

Tech Support Guy System Info Utility version OS Version Microsoft Windows bit Processor AMD A - M APU with Radeon tm HD Graphics AMD Family Model Stepping Processor Count RAM Mb Graphics Card AMD Radeon HD G Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB Motherboard LENOVO Lenovo IdeaPad S Antivirus Windows Defender Disabled I m not sure if this is the right category to post in if not- please advise with correct category Consider me a tech dummy I know very little but am learning as I go Approximately weeks ago I suddenly began to have problems with my connectivity on my laptop I have a router and multiple devices that receive wifi in the home When I was able to get reconnected everything ran very slow in loading- sometimes it won t even load properly This problem in only with my laptop Wifi properties adapter and only at home When I ve used a friend s wifi or public it runs perfectly I even purchased a new stronger router and I still have the issue I ve been doing a lot of reading and am wondering if someone can tell me what the property settings should be for my Wifi adapter properties wifi adapter Specifically The Advanced properties - adhoc support country region multimedia gaming radio roaming sensitivity I am convinced that this is a simple problem concerning a setting of some sort as every other device using the wifi is working Wifi adapter properties properly and that my own laptop works just fine on any other wifi system Thank you sfskytop nbsp

Relevancy 54.61%

Can any one just solve my below problem. I am having trouble with my Windows 10 network adapter problem.
It shows multiple adapter in network adapter settings. Please see below screen shot. and Sometimes it doesn't shows any adapter at all. and i see at my wifi-router no beeping in light where my Pc's Ethernet connection is.

Plz guys what to do, fyi last one is working right now-

http://www.tenforums.com/network-sharing/48973-multiple-ethernet-network-adapter-network-adapter-settings.html
Relevancy 54.18%

Hi guys,

Since a couple of weeks ago, I've noticed that when I go to change LAN adapter properties (For example, to manually give my adapter an IP), explorer always crashes in Windows 7. I have no idea why, and is there anyway to fix it? I know this isn't very descriptive, but its as much as I can give.

Also, at that same time, the themes service keeps crashing, and my taskbar keeps going into windows classic mode. I noticed this after when I installed 3DMark Vantage, which installed PhysX drivers for my ATi card! Since then, it's happened. I uninstalled 3DMark vantage and the PhysX drivers, and it still occurs

Thanks in advance
 

Relevancy 52.89%

Hi all,
I've some users added to 'Network configuration operator' on Windows 7x64 Pro SP1 and they cannot open the properties dialog of network interface. I've tested the KB2157332 on Windows 7 x64 Pro
without SP1 and it works, but I cannot install it on W7SP1 computer, . I'm looking a SP1 version of the hotfix but I cannot find it. 
I've read
this and
this post but still getting the issue
Any idea to solve it?
Thanks

https://social.technet.microsoft.com/Forums/en-US/bd6896d1-1e9d-49ac-955a-2492179ed728/network-configuration-operator-cannot-open-the-properties-dialog-of-a-network-interface?forum=w7itpronetworking
Relevancy 51.6%

device manager under my Network adapter. I have my Intel Ethernet adapter listed and then underneath the bang with WAN Miniport (IP) #2. When I check the properties of the device It says it is not working properly. When I attempt to uninstall the device it tells me that the device cannot be removed because it is required to boot the system.

A:device manager under my Network adapter. I have my Intel Ethernet adapter listed and

go into your bios and under boot options, remove network/internet as a boot option if it is listed.

http://www.techsupportforum.com/forums/f10/device-manager-under-my-network-adapter-i-have-my-intel-ethernet-adapter-listed-and-91828.html
Relevancy 51.17%

Hello

I have my AWUS036H for a few months now and it worked perfect until now.
My landlord has a router in his appartment and I need to connect to that router to get access to the internet.
I bought this adapter for a better signal but this week I got a very weird problem.
My adapter can find all the networks surrounding it except my landlord his network. But my inbuilt adapter can find my landlord's network and all the others. To clarify, here an example:

AUS036H finds:
Neighbour1 (strong signal)
Neighbour2 (strong signal)

Inbuilt adapter finds:
Neighbour1 (weak signal)
Neighbour2 (weak signal)
Landlord's network (weak signal)

What is going on? It drives me nuts!

Thanks in advance

A:AWUS036H adapter can't find specific network but inbuilt adapter can

  
Quote: Originally Posted by Herp


Hello

I have my AWUS036H for a few months now and it worked perfect until now.
My landlord has a router in his appartment and I need to connect to that router to get access to the internet.
I bought this adapter for a better signal but this week I got a very weird problem.
My adapter can find all the networks surrounding it except my landlord his network. But my inbuilt adapter can find my landlord's network and all the others. To clarify, here an example:

AUS036H finds:
Neighbour1 (strong signal)
Neighbour2 (strong signal)

Inbuilt adapter finds:
Neighbour1 (weak signal)
Neighbour2 (weak signal)
Landlord's network (weak signal)

What is going on? It drives me nuts!

Thanks in advance


Here is the problem, the AWUS036H can only see b or g signals, it's not 802.11n capable so it can't see N only signals. The Landlord has a router which is set to broadcast the faster setting which is 802.11n only, not mixed with b or g because that would limit the connection speed to 54Mbps.

This means that you can't see his N only signal because the AWUS036H isn't N capable. No doubt the inbuilt adaptor is N capable.

You really need to get one that can pick up b, g and more importantly n which is much faster and usually has more range.

http://www.sevenforums.com/network-sharing/313981-awus036h-adapter-cant-find-specific-network-but-inbuilt-adapter-can.html
Relevancy 51.17%

Hello I registered to forums to get help to solve wireless adapter issue I am having I have been looking for help to IP could Wifi adapter network stack protocol bind not adapter in Wifi adapter could not bind IP protocol stack to network adapter Lenovo forums and AV provider problem is still on Background I changed AV software from Symantec to F-Secure I uninstalled Symantec software and installed F-Secure software Laptop is Lenovo T What happened First I recognized that ping commands caused Windows to crash Then I uninstalled some VPN softwares and ping started to work Operation did something to wireless and LAN connections they did not work anymore LAN started to work by removing LAN drivers from device manager and reboot After reboot Windows reinstalled LAN drivers and LAN was ok Wireless is a pain in there I have tried almost everything All Lenovo provided network softwares and power management tools are uninstalled and reinstalled together with wireless drivers Wireless driver is not recognized by Windows None of automatic repairs or wifi uninstallation operations have corrected problem I collected some logs which might help but now I do not know how to proceed Windows reinstallation is something which I do not want to do ------ Device Manager Device Manager has quot Intel R Centrino R Wireless-N Wifi adapter could not bind IP protocol stack to network adapter There are no devices with exclamation marks ------ Lenovo software diagnose repair log Issues found Detection details There might be a problem with the driver for the Wireless Network Connection adapter Detected Detected Windows couldn't automatically bind the IP protocol stack to the network adapter Set up the wireless network adapter Completed Set up the network adapter to communicate with this network This ensures that both Internet Protocol Version TCP IPv and Internet Protocol Version TCP IPv can be used on the network adapter InformationalNetwork Diagnostics Log File Name BF E - CA- E E- EDA- D CDCCE Repair Admin etl The wireless network adapter is experiencing problems Completed Windows Help and Support can provide more information about resolving driver or hardware issues Detection details Expand InformationalDiagnostics Information Network Adapter Details about network adapter diagnosis Network adapter Wireless Network Connection driver information Description Intel R Centrino R Wireless-N Manufacturer Intel Corporation Provider Intel Version Inf File Name C Windows INF oem inf Inf File Date July Section Name Install MPCIEX Lenovo HMC BGN WIN Hardware ID pci ven amp dev amp subsys Instance Status Flags x a Device Manager Status Code IfType Physical Media Type ------- It seems there is collision between Windows registry and device manager What can I do to repair wireless Thank for your help

A:Wifi adapter could not bind IP protocol stack to network adapter

Hi Ron, Welcome to Sevenforums.

Try this to start

Control Panel > Administration Tools > Computer Management > Services & Applications > Services.

Scroll down this list to find 'WLAN Auto Config'

Double click on 'WLAN Auto Config' On the general tab, select from the start up type drop down menu, select 'Automatic'. Under Service Status click on 'Start'. Then 'Apply' these settings and exit from all open control panel windows.

This should then allow Windows to set the required bindings.

http://www.sevenforums.com/hardware-devices/314713-wifi-adapter-could-not-bind-ip-protocol-stack-network-adapter.html
Relevancy 51.17%

I have an Inspiron home running XP and a Latitude D XP that I used to be able to use interchangably with a Comcast modem and a Netgear WGR router A couple of weeks ago my internet connections slowed and now have ended After several phone calls to Comcast the last tech told me the problem was quot the network address showing in the device manager is different than the network address that shows in the TCIP IP settings quot I am getting an error message of quot network cable unplugged quot on the Inspiron and the red X on the second of the two adapters st is nd is Broadcam x I can get internet from the Latitude when directly connected to the cable modem but not when routed through the router for wireless We have tried multiple reconfig of the IP shutting everything down computers router modem all with no success Any help anyone can provide would be great--I still need to order Christmas presents nbsp

A:Network adapter in device manager is different than adapter in TCIP/IP settings

https://forums.techguy.org/threads/network-adapter-in-device-manager-is-different-than-adapter-in-tcip-ip-settings.886135/
Relevancy 51.17%

Hello, I just receive my new desktop with a brand new windows 8, after I successfully installed and activated windows it seems I can't connect to my network neither access its properties. I am actually using my phone as a wifi adaptor through easytether and I already tried to (re)install different driver for my Ethernet card but it makes no difference. I don't think easytether could be the cause but I can't connect to any bank website, facebook, hotmail, I can't download and install google chrome and I can't use windows update (I though it could have fix few of the issues). I don't know if I posted this thread in the right place since so many things are malfunctioning but I'll be glad to have a bit of help here. cheers

A:Can't access network properties,can't connect to network

Originally Posted by sogefurter


Hello, I just receive my new desktop with a brand new windows 8, after I successfully installed and activated windows it seems I can't connect to my network neither access its properties. I am actually using my phone as a wifi adaptor through easytether and I already tried to (re)install different driver for my Ethernet card but it makes no difference. I don't think easytether could be the cause but I can't connect to any bank website, facebook, hotmail, I can't download and install google chrome and I can't use windows update (I though it could have fix few of the issues). I don't know if I posted this thread in the right place since so many things are malfunctioning but I'll be glad to have a bit of help here. cheers



If you can post a screen shot of the ipconfig/all from this machine it would be most helpful.

http://www.eightforums.com/network-sharing/28860-cant-access-network-properties-cant-connect-network.html
Relevancy 50.74%

problem w/ Microsoft 6to4 adapter (network adapter)

I am frequently being disconnected from the internet.

Microsoft 6to4 adapter (network adapter) has a exclamation mark (!) in a yellow triangle in device manager.

This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.

When i check for solutions, it says cannot load driver software.
 

A:problem w/ Microsoft 6to4 adapter (network adapter)

See this

http://support.microsoft.com/kb/932520

If there are no problems connected with this code31, ignore it.
 

https://forums.techguy.org/threads/problem-w-microsoft-6to4-adapter-network-adapter.784178/
Relevancy 49.88%

I am currently encountering problems with my internet connection because of a problem to my computer's Network Adapter which; Realtek RT Family PCI-E Fast Ethernet NIC (NDIS 6.0) additionally, I cannot watch movies with my computers Media Player because there is also a problem to the; Standard VGA Graphic Adapter.

I have tried updating in Systems but says the driver software for the device is up to date. I even tried disabling it but the problem still persist. Even scanning it incase of hardware change, but still a problem.

Is there any advice on how I can configure the problem.

A:Network Adapter and VGA Graphic Adapter problems

Originally Posted by ausred


I am currently encountering problems with my internet connection because of a problem to my computer's Network Adapter which; Realtek RT Family PCI-E Fast Ethernet NIC (NDIS 6.0) additionally, I cannot watch movies with my computers Media Player because there is also a problem to the; Standard VGA Graphic Adapter.

I have tried updating in Systems but says the driver software for the device is up to date. I even tried disabling it but the problem still persist. Even scanning it incase of hardware change, but still a problem.

Is there any advice on how I can configure the problem.



Hello ausred, and welcome to Windows Vista Forums.

First, can you describe the "problems" you are having with your Ethernet card?

Can you post a screen shot of the Ethernet card entry in your "Device Manager"?

It would look like this:

Cheers!
Robert

http://www.vistax64.com/general-discussion/282637-network-adapter-vga-graphic-adapter-problems.html
Relevancy 49.88%

I m not totally computer-literate when it comes to hardware and such but I am fairly literate with most computer terms So in advance I apologize for any confusion a misused hardware name may cause Also before I begin let me just say that the issues hereafter discussed apply to a computer separate from this one compatability Network Adapter/Wireless Adapter This computer works fine but the one I will be talking about my computer is the one without an internet connection at the moment So recently my network adapter decided to stop working I won t go into the details but it s completely fried and I d much rather spend the money to get a new one instead of go through the hassel of trying to fix my old one And Network Adapter/Wireless Adapter compatability thus we come to question number one Do most if not all network adapter cards work with most PCs I have a Dell Dimension with Windows XP Home edition with highspeed cable internet so would pretty much any network adapter do the job My stepdad who is fairly computer-literate though often too cocky about it says that pretty much all network adapters will work with any computer unless the computer and network adapter are old or new respectively Also what are the most reliable brands of network adapters What kind of details about the product should I look for when purchasing Now on to the second part of my post wireless internet adapter For a while my computer has been a few feet from the router because we had have no way for a cord to reach anywhere else particularly my room Now because of spacing issues in this room I am being forced to relocate my computer My choices are these a Buy a wireless network adapter so I can move my computer to my room or b Have an internet-less computer for an indeterminate amount of time Obviously I prefer the former So my next question is basically the same as the first one but about wireless internet adapters rather than network adapters Do wireless adapters work universaly for computers Again I have a Dell Dimension with highspeed cable internet so I m pretty sure the speed of the wireless adapter is important And again what are the best most reliable brands of wireless adapters What product details should I be looking for I hope I ve provided all of the necessary information I m most likely going to be ordering the aforementioned hardware bits off of NewEgg com or some other similar computer hardware site I don t know if that helps in answering the question s at all but I figured any additional information may help Thanks to all of those who have taken the time to read my questions and I appreciate any response greatly nbsp

Relevancy 48.16%

i cannot access the properties of my network connections, all i get is a popup window
saying "unexpected error has occured"
i've tried microsoft suggestion of registering ole32 and netshell but these did not help.
i've scanned with av and malwarebytes and nothing shows in event viewer at the times i
try to access the properties button of any of my network connections.
please help
thank you for your time

A:cannot access network properties

Dont know if you have a wireless connection or no, but have you read this from microsoft?? Here

http://www.bleepingcomputer.com/forums/t/272828/cannot-access-network-properties/
Relevancy 48.16%

Hi,
Please Help me to resolve this "ISSUE"

My wireless network Association, tab has changed completely to
Spanish, however, all other tabs remain in English
(authentication, connection). Also on the list of wireless
networks has information in Spanish (see images for details).
Its strange because I've never used Spanish EVER before in
anyway or form on my computer. I also reinstall wireless network
adapter Driver but problem is still There :-(

Please help me
Thanks in Advance
Regards
 

A:wireless network Properties

Who will help me to resolve this annoying problem!!!
 

https://forums.techguy.org/threads/wireless-network-properties.980220/
Relevancy 48.16%

Hi,

I am having a lot of users. If there is some way to disable the Network Properties. then please inform, it will be very useful....my main objective is that users should not be able to see there Ip by Right Clicking on the Network Places icon or some other way
OS is Windows Xp...

Waiting for a positive reply...

Regards
 

Relevancy 48.16%

Today, I turned on my secondary laptop (which hasn't been used in months) was greeted with a start up error which ended up needing to repair the "SYSTEM" boot partition . Now I got the system running but can't get any adapters to work. When I first logged in every network adapter had code 31(could not load driver). I was able to get around that by manually uninstalling each on and letting it re-install. Now each adapter has no properties so there is no internet connection at all. I mentioned the start up problem because I am not sure if the two are related at all.


Any help would be appreciated!

A:All network adapters have no properties.

Hi ben,

Did you install an updated version of the driver or the same one ? What is the exact model of the laptop
To get the model number enter this command


Code:
wmic computersystem get oemstringarray

http://www.sevenforums.com/network-sharing/283170-all-network-adapters-have-no-properties.html
Relevancy 48.16%

Bear with me as I am a newbie to networking. I got a Netgear WGR614 router and have it hardwired on a Win XP SP2 PC. It is working fine. My other PC is Win98SE and I got a Netgear WG111v2 USB 2.0 adapter for that PC. I had some trouble installing it but finally got it done. My download speed on that PC is about 650K, where my other PC is 1500K. I am using a Broadband modem. What I was wondering is would a Network card make the speed any faster compared to the USB adapter, as my 98SE PC only has 1.1 USB and not 2.0, or is it slower because the PC is just old!...confused...thanks for any insight......Carole
 

A:Network Card adapter or USB 2.0 adapter?

Well, it's hard to imagine USB being faster than the Ethernet, not to mention that Ethernet is more stable for networking. The slow downloads may just be the machine, the network drivers, or the adapter itself. I only use USB adapters as a temporary measure to test machines.
 

https://forums.techguy.org/threads/network-card-adapter-or-usb-2-0-adapter.438411/
Relevancy 47.73%

If I change the folder properties accessing a shared folder (say pictures) over my home network, will it alter the folder's properties on the drive on which it resides or just the folder on the machine I am using to access the folder?

I am accessing my pictures folder on my desktop from my laptop from the other side of my house. The pictures and videos folders are set to "general items", the customize tab of the properties on the folder is set to "general items" when I access it from the laptop. If I switch the pictures to "pictures" and videos to "videos" on the laptop, will it alter the folder in the desktop on which the folder resides?

Hope this is clear enough, Thanks for any help, I have a hard time with sharing and permissions.

A:Folder properties when sharing over network

If you are able to connect to the folder, either locally or over the network, and managed to change it, then it will or should be changed. I'm sure you are not referring to doing ith with different user profiles, right? Best way is to try it and find out

http://www.sevenforums.com/network-sharing/50820-folder-properties-when-sharing-over-network.html
Relevancy 47.73%

Hi,

I've had real trouble locating this particular window in Windows 10. The only way I can get to it is if I create a manual entry for a wireless network. In Windows 7 you used to be able to get to it for existing wireless networks that I had previously connected to. Does anyone have any idea how to get to it? Many thanks

A:Where is the Wireless Network Properties window from W7?

Settings app > Network & Internet > WiFi > Manage known networks. Select a network, click Properties

Wireless Network Profiles - See in Windows 10 - Windows 10 Forums

http://www.tenforums.com/network-sharing/70127-where-wireless-network-properties-window-w7.html
Relevancy 47.73%

Hi,
What can be keeping me from accessing Network Properties of my Dial-up?
I open the shortcut icon, then right-click on my dial-up, but nothing happens.
I have a working thread going ( in this forum titled Possible Bug? ) regarding a problem with Generic Host Process errors, and need to get into the properties to enable the simple Windows firewall, in SP1. I've tried in Safe Mode too.
Any help will be appreciated.
Thank you for your time,
patmac
 

A:Solved: Can't Access Network Properties

You will need to delete and recreate your dial-up connection. Make sure you save any phone numbers that it dials and any usernames/passwords.

I used to work tech support for earthlink, and that was the only thing we could do to resolve this issue.
 

https://forums.techguy.org/threads/solved-cant-access-network-properties.503478/
Relevancy 47.73%

Has anyone seen an issue with trying to access the properties of a network share and getting absolutely nothing? Just upgraded to Win10 from 7. We are in a windows 2008 domain with 2012 and Win 10 machines.
We have regular accounts and admin accounts. The regular account can see get properties for the folders/shares that it has access to. The admin account, when run using "run as a different user" cannot generate the properties dialog box at all. This worked fine on Win 7.

Any ideas?

http://www.tenforums.com/network-sharing/45581-windows-10-network-share-properties.html
Relevancy 47.73%

Whenever I try to change my network connections I get the following error:

Cannot write phonebook.
Error 624: The system could not update the phone book file.
I am also having other issues that may or may not be related see threads:

http://forums.techguy.org/t294765.html
http://forums.techguy.org/t294528.html
http://forums.techguy.org/t294305.html

Thanks
 

https://forums.techguy.org/threads/cant-change-properties-of-network-connections.294815/
Relevancy 47.73%

I am not able to access or change my network settings.

Windows XP Home SP 3

I do the following:

Start > Control Panel > Network Connections. Right click on Local Area Connection and choose Properties.

Then get these error message

"Some of the controls on this property sheet are disabled because one or more other Network property sheets
are already open. To use these controls, close all these property sheets and then reopen this one"

Tried rebooting, tried disabling local area connection then rebooting and re-enabling still no luck.

Only other thing I can think of is that I tried VMWare (new browser version) did not like and uninstalled it.

Any ideas would be appreciated.

A:unable to access network properties

For diagnostics: Boot in a safe mode with networking and try if it works....Begin tapping the F8 key every few seconds as the system boots up until the screen offering the Safe Mode option appears.

http://www.bleepingcomputer.com/forums/t/211109/unable-to-access-network-properties/
Relevancy 47.73%

I believe I messed up the network settings on my machine not via the router but via control panel when you right click on the Local Area Connection gt Properties gt IPv IPv and some network reset properties? Completely all more places I can't remember and that's the problem Another thing is when I type ipconfig all I Completely reset all network properties? see that DHCP is not enabled and I remember it used to be enabled In IPv and IPv properties everything is set to automatically so I dont know why web pages take too long to load Mbps connection the rest of computers on the network are surfing the web fast I also get an error a few times a day where the little symbol of the LAN in the taskbar has a yellow exclamation mark and I need to right click and do the Troubleshoot problems and at the end I always get quot The default gateway was not available quot and it's fixed but keeps coming back I tried something I found on Microsoft help page and ran the following cmd netsh int ip reset c resetlog txt That didn't help

http://www.sevenforums.com/network-sharing/402610-completely-reset-all-network-properties.html
Relevancy 47.73%

Hi, I'm stumped as to why Explorer crashes whenever I try to view properties on any of my network connections. Its quite possible that I've messed something up in one of many tweaks. I just don't know when it happened.

The event viewer shows the following error:

"Faulting application explorer.exe, version 6.0.2900.2649, faulting module msvcrt.dll, version 7.0.2600.2180, fault address 0x00037e9f."

Is it possible to re-install just the networking components for WinXP, or do I have to do a full fresh install?

Inso
 

Relevancy 47.73%

Have three win xp machines on lan will search and find all three but while two will show the lan network properties, one wont . I need the properties of the netcard to set tcp/ip and dns .
have tried uninstalling the netcard no help! uninstalled xp networking components no help.
any help please Regards Alan G
 

Relevancy 47.73%

I’m using Windows 2000 server, the NIC card as 2 ip address I’m trying to remove one of the address as I moved the Web Page to a different computer But when I right click on the network neighborhood I get the hourglass for 3 sec. And then nothing. I tried restarting the server in safe mode with network support (same result). I tried replacing the NIC Still I could not access the TCP/IP configuration. I’m wondering if there is a way to remove the address from the command prompt or some other way.

Thank you.

Sqwerty_L
 

https://forums.techguy.org/threads/network-neighborhood-properties-problems.68772/
Relevancy 47.73%

as you can see the properties button does not lit up and remains grey out although i click on IPV4, why is this happening? i was open it a few years ago

A:Unable to configure network properties

Have you done this? Change TCP/IP settings

http://www.sevenforums.com/network-sharing/282106-unable-configure-network-properties.html
Relevancy 47.73%

I'm having major problems with my ip configuration settings I want to be able to use a fixed ip address and gateway for my wireless network connection The problem is that after I've properties BSOD network changing after changed the configuration of the IP version connection properties to the fixed ip I want to use and ok it My system crashes with a Stop error Bsod implicating the file tcpipreg sys as the culprit I ve tried disabling Ip version as I thought that maybe they were clashing somehow but other than that it seems I m stuck using DHCP which is annoying as the reason I am trying to switch off DHCP is to solve another problem Namely that Every BSOD after changing network properties time I BSOD after changing network properties start up my computer my connection shows Limited or no connectivity and I am forced to either Diagnose and Repair my connection or ipconfig renew in order to get an outside connection The adapter is a Realtek RTL and is an integrated device on my Asus P N -SLI Premium Motherboard

A:BSOD after changing network properties

I'm wondering if this helps anything.

This is from WinDbg.
Sorry it makes this such a long post.


Microsoft (R) Windows Debugger Version 6.8.0004.0 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Vista Kernel Version 6000 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6000.16575.amd64fre.vista_gdr.071009-1548
Kernel base = 0xfffff800`02000000 PsLoadedModuleList = 0xfffff800`0219af70
Debug session time: Fri Jan 11 12:23:45.207 2008 (GMT+0)
System Uptime: 0 days 0:12:38.097
Loading Kernel Symbols
............................................................................................................................................................................
Loading User Symbols
PEB is paged out (Peb.Ldr = 000007ff`fffd3018). Type ".hh dbgerr001" for details
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffa8007ed2ff8, 1, fffff98006b5dfef, 0}

Page 4ffb8 not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 500cb not present in the dump file. Type ".hh dbgerr004" for details
Page 500cb not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 500cb not present in the dump file. Type ".hh dbgerr004" for details
Page 500cb not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 4fdc9 not present in the dump file. Type ".hh dbgerr004" for details
Page 4fdc9 not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 4fdc9 not present in the dump file. Type ".hh dbgerr004" for details
Page 4fdc9 not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 4ff0a not present in the dump file. Type ".hh dbgerr004" for details
Page 4ff0a not present in the dump file. Type &qu... Read more

http://www.techsupportforum.com/forums/f299/bsod-after-changing-network-properties-210744.html
Relevancy 47.73%

I am working on someone's XP Pro SP2 Box, and I cannot change the properties of any network connection. When I right click on the connection and click properties is says "Do not have sufficient privileges, contact your administrator"

I am the Administrator, logged in as the administrator account, and the machine is not on a domain.

Any Ideas what setting could cause this, and where it is?
I wasnt even aware you could lock administrator out...

Thanks -
Mike
 

Relevancy 47.73%

When I go to my network connections and attempt to display the properties of my dial up modem properties(my default internet connection with MSN)...so that I can enable the firewall...nothing happens. Nothing. The computer doesn't hang, no error message pops up. It just doesn't respond. I have tried several times with this problem. Microsoft had me uninstall all of my network connections and then reinstall to see if that changed anything...but nothing. I had this issue once before but can't remember what I did to correct it.
I'm running Win XP on an AMD 850 Athlon PC Clone with 512MB RAM, with a 100GB HD.
If anyone has encountered this or can offer any help I'd be very grateful.
 

A:Dial up network properties won't display!

How are you access it? Have you tried within IE and selecting Tools, Internet Options, and the Connections tab?
 

https://forums.techguy.org/threads/dial-up-network-properties-wont-display.72479/
Relevancy 47.73%

Hi everyone,

Everything was going just fine, and I was enjoying Wireless network, today I have to connect to a network via LAN ( with an RJ-45 ), and after that I am unable to open properties for any of my network connections. When I right click on any of the network connections then a menu appears with nothing in it, as you can see from the picture, and when I click on the last menu entry assuming it would be Properties, a dialog box appears with nothing written on it and an OK button, I want to change the network properties for my wireless network. Please help.

Thank You very much.

A:Network Connection Properties not Opening

Originally Posted by rat170


Hi everyone,

Everything was going just fine, and I was enjoying Wireless network, today I have to connect to a network via LAN ( with an RJ-45 ), and after that I am unable to open properties for any of my network connections. When I right click on any of the network connections then a menu appears with nothing in it, as you can see from the picture, and when I click on the last menu entry assuming it would be Properties, a dialog box appears with nothing written on it and an OK button, I want to change the network properties for my wireless network. Please help.

Thank You very much.





Do you have a backup you can restore from? thats a quick easy fix for it.

Ken

http://www.vistax64.com/network-sharing/246852-network-connection-properties-not-opening.html
Relevancy 47.3%

Please help me
my Wireless Network Connection Properties not can click!
me try Uninstall WNC Adapter on Device Manager
and reset IPV4, Winsock on CMD.
but still not can click. what is this problem?

http://www.sevenforums.com/network-sharing/382833-help-wireless-network-connection-properties-not-can-click.html
Relevancy 47.3%

This is a fairly new install of Windows 8 pro (within the last month), and while trying to set up a static ip up today I found that I was unable to access the network properties or disable the connection in the Network Connections. I am pretty stumped as I am the only user of this computer and from what I can tell have the correct permissions to do so. When trying to check the properties it tells me "an unexpected error has occurred" with no further information.

Has anyone had this problem and found a fix?

A:Unable to access properties of my network connection.

It sounds like you aren't using an Admin account on this machine.

Under Computer Management, Local Users and Groups>Users, you should see your name there, under the Member Of' Tab, you should be listed at a member of the Administrators and Home Users. You can add the credentials if you aren't.

http://www.eightforums.com/network-sharing/21814-unable-access-properties-my-network-connection.html
Relevancy 47.3%

I recently recovered from the Agobot worm and a couple other viruses (serv1ces.exe and microsoft.exe). However I noticed today that nothing shows up when I try to access the Device Manager or my Network Properties. Is there a way to rectify this?

Thanks in advance.
 

Relevancy 47.3%

The wireless network properties box is missing. I have a Satellite pro 4600 with Linksys card for wireless and every thing worked once before. I replaced the hard drive with a new one and rebuilt the system. After installing the Cisco PEAP supplicant software to be able to logon at the college the box is now missing. I've tracked the problem to the PEAP software overwriting files on Win2000 sp4.
Or so the masters at M/S claim. Their advice was to reinstall Sp4. This didn't work. All of the information I have for configuring wireless cards for Win2000 show this box and it was there the firt time I set up the system. I have reformatted the hard drive twice then Installed Win2000 pro and the Sp3 and Sp4 using two different Install cds. I did not install the PEAP supplicant and still no box.

Thanks Rezehk
 

A:Win2000 pro wireless network properties box missing

Did you install ALL the motherboard drivers for the system?
 

https://forums.techguy.org/threads/win2000-pro-wireless-network-properties-box-missing.311041/
Relevancy 47.3%

HI all am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro. those anyone know how to fix this?

A:An Unexpected error accured Network properties

Is it really bricked or is it in limbo? I had one I thought was bricked, turns out i just had to wait it out to finish the firmware upgrade.

What model router is it?

Were you trying to install DD-WRT?

if you think that its just a configuration problem, then go to device manager and uninstall your network driver, then click on the action tab on top and click scan for hardware changes, and let windows reinstall them in their default settings. Now try your custom IP.

Did you do the 30-30-30 reset? (press and hold the reset button for 30 secs, unplug router, wait 30 secs, plug router in while still holding the reset, then after 30 more secs, release the reset.) Do not release the reset at any time, til the end.

If it has not completed the firmware upgrade then do not do the 30-30-30 reset until its done..

Brooklyn!

http://www.eightforums.com/network-sharing/25371-unexpected-error-accured-network-properties.html
Relevancy 47.3%

Just got a laptop with Vista Home and I want to install this onto my home network (MSHome) that has 5 other WinXP systems on that network. When the laptop was setup it chose a default network group called Workgroup or something like that and I cannot figure out how to get this computer navigated to the MSHome network.
 

A:Solved: Can't change home network properties

Control Panel (Classic view) - System - Advanced System settings -Computer Name.
Then "Change"
 

https://forums.techguy.org/threads/solved-cant-change-home-network-properties.729556/
Relevancy 47.3%

I have up until a few days ago been able to modify and save my network properties ok I connected a new DisplayLink USB docking station that lead to an update of some sort I believed this to be 8 Not Properties Saving Network Connection Windows to do with associated drivers I Windows 8 Network Connection Properties Not Saving let this go ahead and it may well have nothing to do with the problems I have been having First of all I couldn't even see the IP parameters and kept getting an error as follows quot In Order to Configure TCP IP You Must Install and Enable a Network Adapter Card quot The wired and wireless was working in environments where I could use DHCP so I was confident the hardware was ok Uninstalling the drivers and then updating them has got me passed this problem so I can see and edit the IP parameters However now they are never saved I edit them close the window re-edit them and they are back to automatic settings I need to use static settings in the office So far as I can see there are possibilities I don't have permissions to save these settings wherever they are stored But I have administrator permissions Where are the settings stored I have saved them before How can I get access to be able to save them again Something else is overwriting the settings How do I find out what and stop it Any other suggestions would be greatly appreciated Or a way to diagnose solve my problem Thanks in advance Steve

A:Windows 8 Network Connection Properties Not Saving

Have you tried running a system file corruption scan/repair using the sfc /scannow command?

SFC /SCANNOW Command - Run in Windows 8

http://www.eightforums.com/network-sharing/32329-windows-8-network-connection-properties-not-saving.html
Relevancy 47.3%

The probelm only happend on 1 win7 PC, suddenly the PC slow to open some network printer properties that also makes slow to print.

1. On the PC nstalled 3 Network printer A,B,C open B properties is normal fast, but slow to open A,C.
2. Others PC also installed those 3 network printer and No problem.

I have replace NIC, Reinstall/Repair Win7 but no success, How to trace/diagnose PC to Printer communication so I can figure out what the problem is.

Thanks

A:Slow open Network Printer Properties

Printer shares often work more quickly and efficiently with uPNP enabled in your router, depending upon exactly what you are calling a network printer...

http://www.sevenforums.com/network-sharing/208665-slow-open-network-printer-properties.html
Relevancy 47.3%

I have symptoms that I am having trouble getting rid All of them started Network Properties Connection Nowfind, WebSiteViewer, nights WebSiteViewer, Nowfind, Network Connection Properties ago and I have been trying to get rid of them since then First of all I have something called WebSiteViewer that keeps coming back even after it appears that it has been removed I have read WebSiteViewer, Nowfind, Network Connection Properties other logs on this forum about it and I have tried some of the advice but with no avail Second when I open a web browser it is going WebSiteViewer, Nowfind, Network Connection Properties to www nowfind net Third if I click on my Wireless Network Connection properties the window disappers without opening the properties So for so more detailed information on what I know about what is going on The WebSiteViewer has installed in C Program Files WebSiteViewer There are five files in that directory ban dd dlr exe and ico There is also a shortcut on my desktop and a shortcut on my Start Menu for the exe There is also a misb exe file in my root directory C that I believe is related as it has the same icon There is a process with an image name of dlr running I started out by manually deleting all of this stuff and manually shutting down the process I have also tried Spybot and Adware Both of these programs also found the WebSiteViewer stuff listed above as well as a few registry keys dealing with them They both seemed to remove everything however after a reboot everything comes back So somewhere there is something still living that reinstalls everything once I reboot The www nowfind net problem I initially tried just setting my default URL back to blank as I had it Which it accepts but then the next time I open a browser it is back If I type a URL without the preceding http then it automatically goes to www nowfind net however if I fully qualify the URL with http then it goes where I expect In the registry for HCU and HLM under Microsoft- gt Internet Explorer there are a number of entries that have the www nowfind net URL including Search and SearchURL Then under Main still under Internet Explorer there are Default Page URL Default Search URL Search Bar Search Page and Start Page And then under Search in CustomizeSearch and SearchAssistant I have tried deleting all of these registry entries manually However they come right back even without a reboot I can delete them then just refresh and they are right back So here again something is running that puts them back If I view my available Wireless Network Connections then hit the advanced tab then select my network and hit configure or properties then the window just disappears instead of opening the properties The last thing that I should mention is that I have also run CWShredder and TrendMicros virus scan the web version that is available from a link that I found somewhere in thisforum I am running XP and I also am running an outdated version of McAfee that came free on my computer Now I have never run HijackThis before I simply downloaded it and ran it I ran it while all of symptoms above were present as I stated AdWare and Spybot will remove the WebSiteViewer comes back after a reboot and the www nowfind net comes back right away I also read somewhere on the forum to use the KRC HijackThisAnalyzer so here is the result txt from it Log was analyzed using KRC HijackThis Analyzer - Updated on Get updates at http www greyknight com download htm programs Security Programs Detected c PROGRA mcafee com vso mcvsrte exe c PROGRA mcafee com vso mcshield exe C PROGRA mcafee com agent mcagent exe C PROGRA mcafee com vso mcvsshld exe O - HKLM Run MCAgentExe c PROGRA mcafee com agent mcagent exe O - HKLM Run MCUpdateExe C PROGRA mcafee com agent mcupdate exe O - HKLM Run VirusScan Online quot c PROGRA mcafee com vso mcvsshld exe quot O - HKLM Run VSOCheckTask quot c PROGRA mcafee com vso mcmnhdlr exe quot checktask O - Service McAfee com McShield McShield - Unknown owner - c... Read more

A:WebSiteViewer, Nowfind, Network Connection Properties

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem a.s.a.p

Please be patient with me during this time.
__________________

...A Reflection On Spyware...


Mr. Incredible: No matter how many times you save the world, it always manages to get back in jeopardy again. Sometimes I just want it to stay saved! You know, for a little bit? I feel like the maid; "I just cleaned up this mess! Can we keep it clean for... for ten minutes!"

...greyknight17 DOT com...

http://www.techsupportforum.com/forums/f100/websiteviewer-nowfind-network-connection-properties-42318.html
Relevancy 47.3%

Hi So recently I have removed a nasty zeroaccess rootkit virus es from my laptop My Windows Firewall Defender and Updates would not work still won't my browser kept redirecting to unrelated websites and I was just overall having a TON of irritating issues I installed MalwareBytes and Zone Alarm in addition to my Microsoft Security Essentials and restarted my computer once - everything seemed fine I went to delete a few programs from my computer via the control panel just unneeded things like Canon software I don't even use anymore My computer told me I needed to restart so I did and when connection wireless driver adapter network Problems with and network it turned back on I suddenly had no more Internet access It registers that my Internet providers are being picked up on as in it says Silver Moose is emitting a signal yet I have quot limited access Problems with wireless network adapter and network connection driver quot and all other devices using the network in my home are working just fine I tried troubleshooting and it says that there Problems with wireless network adapter and network connection driver are problems with the wireless Problems with wireless network adapter and network connection driver network adapter and the driver for wireless network connection adapter I've read that removing a access will render someone Internet-less but some people have overcome this However every thread I've already taken a look at don't exactly fit with my problems computer model so I wanted to stay on the safe side and get help fitted exactly to me I have Windows bit a Gateway model NV I don't know if my processor Intel R Core details are needed If so I'll gladly provide them I ran ipconfig all and was about to transfer a copy of it from my messed up computer to this one via a flash drive but suddenly I've found that my computer doesn't recognize a flash drive at all anymore So it's very very messed up indeed I would REALLY like to know what I can do to try and make this situation better or if a system restore is the best option I don't know how to use system restore or what it all does so if you do recommend that can you please offer and explanation of the options it'll give me Will it give a time period I want to backtrack to I feel really helpless here so thanks a ton for any and all help

A:Problems with wireless network adapter and network connection driver

First with this remove Zone alarm, while it use to be a great product, it cause more issues than it's worth these days.
Next, Start menu-> All Programs -> Accessories -> Right click on command prompt and run as Administrator.

Type in netsh winsock reset and reboot, see if the combination of these will help.

Otherwise, system restore is very simple to use and will only affect programs installed, not your personal files. If this doesn't solve the issue pick a time before the rootkit, a couple weeks if possible, and just restore it. You can scroll through all the date to make note of any changes that will be made. Make sure to re-install your AV and Malwarebytes afterwards to keep you protected.

Also, I do not work for Malwarebytes, but $29 for a lifetime license and an active protection module is absolutely worth it.

http://www.sevenforums.com/network-sharing/252548-problems-wireless-network-adapter-network-connection-driver.html
Relevancy 47.3%

This is a desktop PC with Windows Home Premium Service Pack bit Up until yesterday the PC had perfect internet access via ethernet When I came to use it last night - no access The situation The sys tray icon has a red cross and mouse over produces Not connected - no connections are available The network Adapter is a Realtek PCIe Solved: and not Centre Network Adapter Network in Sharing showing GBE Family Controller and is showing in Device Manager and according to the properties is working correctly The network diagnostics troubleshooter finds the following - Windows could not automatically detect this network s proxy settings When I open Network and Sharing Centre and then click on Change Adapter Solved: Network Adapter not showing in Network and Sharing Centre Settings there is nothing showing in the Network Connection If I click on Connect to a network I get No connections available If I click on Set Solved: Network Adapter not showing in Network and Sharing Centre up a new connection I get Windows did not detect any networking hardware What I have tried I have uninstalled the network adapter from device manager and then reinstalled it Still showing as ok I have run netsh int ip reset quot and quot netsh winsock reset quot I have downloaded and installed the latest adapter drivers I noticed a Windows Critical update had been done at so I restored the system to before that update I restored further back than that update to two days previously None of the above worked and I m not sure what else to try Has the actual hardware failed or is there something else I can do nbsp

Relevancy 47.3%

I saw another post that had the exact same problem I m having just that my problem is on a desktop We got wireless internet a few months ago and my desktop was working fine with it Have a wireless adapter for Wireless Losing Adapter Computer and Network Network Recognition the internet Then a few weeks ago the internet started randomly disconnecting from only my computer I thought it was a network problem But then I hit something and the internet was working fine again for a few weeks Now it s Computer Losing Wireless Network Adapter and Network Recognition on the fritz Computer Losing Wireless Network Adapter and Network Recognition again starting yesterday When I try disconnecting and then reconnecting to the network it will tell me that there were no networks to connect to And when I unplug the adapter and plug it back in to the usb ports it ll tell me that my computer can t recognize the adapter that it s malfunctioning I ve tried the adapter in all the ports and it gives me the same message I have to restart my computer to get it to both recognize the adapter and the network so it ll connect again once it s restarted The internet will last for random periods of time When the internet goes out I get the yellow triangle error thing first on the network icon it doesn t just go right to there being nothing period and having the X symbol only after I try disconnecting from the network Sometimes all day then I ll leave the computer on over night and find the internet is out again on it in the morning Or it ll last for only a few minutes Sometimes the computer won t lose the network if I try disconnecting and reconnecting from the network It ll reconnect to the local network but when it s trying to find the network to connect to the internet it can t find it It ll say undiscovered network I thought maybe the adapter was faulty so I ve tried switching it with the adapter from another computer It still did the same thing with the other adapter And nothing is wrong with the adapter I was using it worked fine in the other computer when I put it in Both adapters are good When the usb ports stop working for the adapter it s only the adapter having problems Everything else still works fine I have no clue what the problem could be I never had any network internet problems when we had wired internet Here is the system info for my computer I really need help this is causing me heart attacks x x I really don t understand much about computers so if any help could be explained really simply and in a lot of detail so I can understand I d really appreciate it Tech Support Guy System Info Utility version OS Version Microsoft Windows Vista Home Premium Service Pack bit Processor AMD Phenom tm Quad-Core Processor x Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GTS Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total - MB Free - MB K Total - MB Free - MB Motherboard ECS Nettle Antivirus AVG Anti-Virus Free Edition Updated and Enabled nbsp

A:Computer Losing Wireless Network Adapter and Network Recognition

Do other usb devices work fine on the computer? For instance, if you plug in a thumb drive the computer, is the computer able to recognize the drive as well as read/write data to it?
 

https://forums.techguy.org/threads/computer-losing-wireless-network-adapter-and-network-recognition.1056416/
Relevancy 47.3%

Hi I m new to this so bear with me I know there are a lot of forum posts on this on this forum and many others but manager connections network in network 7) available and no No device adapter (windows after hours of trawling through them and getting nowhere I No network connections available and no network adapter in device manager (windows 7) thought I would make a thread with my specific problem and see if anyone No network connections available and no network adapter in device manager (windows 7) can help I got my new graphics card yesterday and after hours of trying to get that to work it s in and working but now I have a red cross where it says my internet is connected and when I click on it it says No Connections are No network connections available and no network adapter in device manager (windows 7) available I have a wired connection and the ethernet cable is in there is no light on my mobo to confirm this When I troubleshoot it says Windows did not detect a properly installed network adapter If you have a network adapter you will need to reinstall the driver I have got my MOBO CD and attempted to do that but the gigabyte interface is completely missing and I can t find the network adapter on there I have also tried downloading the new drivers first on my laptop and running them on the PC but that had no success and the second time through my Iphone personal hotspot but with the same results I know the ethernet cable works because I have put it in my laptop I have a Gigabyte H MA-D v Mobo i K GB Ram GTX Running Windows Any help with this would be greatly appreciated because I m close to putting my foot through my PC Thanks James nbsp

A:No network connections available and no network adapter in device manager (windows 7)

https://forums.techguy.org/threads/no-network-connections-available-and-no-network-adapter-in-device-manager-windows-7.1117129/
Relevancy 47.3%

Hi All Please can anyone help I have done something and I don t know what I have just bought a new a IP Connection' Solved: does Help have Network not 'wireless a valid adapter network computer a compaq running windows AMD athlon tm IIx processor I had no problems connecting it to the internet it has Solved: Help network adapter 'wireless Network Connection' does not have a valid IP a a wired ethernet cable which plugged to my Thompson router and worked straight away I also have a Toshiba satellite L - laptop running Vista with wireless internet connection At this stage I was getting internet on my new PC and wireless internet on the laptop The problem came when I tried to set up a home network I have done it previously on the old pc running Windows XP with no problems however I am not sure what I have done but I can get internet on the PC but on the laptop it is connecting to the wireless network but not the internet In the network and sharing centre it shows the laptop connected to an Unidentified network but then there is a cross through the line connecting it to the internet In Network and Internet Network connections I double clicked on Wireless Network Connection and then on diagnose I got a box with the heading - The network adapter quot Wireless Network Connection quot does not have a valid IP Configeration I am a bit bewildered what to do and thought it better to seek help rather than fumble around in the dark Hope someone can help Thanks nbsp

A:Solved: Help network adapter 'wireless Network Connection' does not have a valid IP a

https://forums.techguy.org/threads/solved-help-network-adapter-wireless-network-connection-does-not-have-a-valid-ip-a.1016800/
Relevancy 47.3%

Hello This computer had malware like vosteran multioplug seachextensions goobzo rockettab installcore I was able to remove them using Malwarebytes The computer seemed to be fine for a few days after that until the network stopped working The wireless network icon has a red x I can't open the the -Can't open network, can't connect Log network adapter HickJackThis to settings Open Network and Sharing Center unless I'm in safe mode and HickJackThis Log -Can't connect to network, can't open network adapter settings I can't open the network adapter settings it says that windows explorer has an error and closes the window I also tried to connect a usb network adapter and an ethernet ExpressCard but it wouldn't install them It won't read usb memories either unless they were installed previous to this incident I booted the computer with bitdefender and scaned it It found a few trojan infected e-mails that were removed No more viruses have been found after that Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows SP WinNT MSIE Internet Explorer v FIREFOX x en-US Boot mode Normal Running processes C PROGRA Lenovo HOTKEY TPONSCR EXE C Program Files x Fortinet FortiClient FortiTray exe C Program Files Lenovo Communications Utility TpKnrres exe C Program Files x Intel Intel reg USB eXtensible Host Controller Driver Application iusb mon exe C Windows SysWOW rundll exe C Program Files x Intel IntelAppStore bin ismagent exe C Program Files x Kaspersky Lab Kaspersky Endpoint Security for Windows avp exe C Program Files x Adobe Acrobat Acrobat acrobat sl exe C Program Files x Adobe Acrobat Acrobat acrotray exe C Program Files x Common Files Java Java Update jusched exe C PROGRA ThinkPad UTILIT SCHTASK exe C Windows SysWOW RunDll exe C Program Files x Symantec VIP Access Client GreenList exe C Program Files x Symantec VIP Access Client WhiteList exe C Users Administrator Desktop HickjackThis HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink p LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink p LinkId R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKLM Software Microsoft Internet Explorer Main Local Page C Windows SysWOW blank htm R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName R - URLSearchHook no name - B D - D - A B-AE - A DA - no file F - REG system ini UserInit userinit exe O - BHO AcroIEHelperStub - DF C-E AD- -A -FA C EBDC - C Program Files x Common Files Adobe Acrobat ActiveX AcroIEHelperShim dll O - BHO Groove GFS Browser Helper - - C - D -B F - BBC D A E - C PROGRA MICROS Office GROOVEEX DLL O - BHO Java Plug-In SSV Helper - BB-D F - C-B EB-D DAF D D - C Program Files x Java jre bin ssv dll O - BHO Partner BHO Class - FF F - C - b -B BA-C DDD E C - C ProgramData Partner Partner dll O - BHO Windows Live ID Sign-in Helper - D - C - ABF- ECC- C - C Program Files x Common Files Microsoft Shared Windows Live WindowsLiveLogin dll O - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - C Program Files x Google Google Toolbar GoogleToolbar dll O - BHO Adobe PDF Conversion Toolbar Helper - AE CD -E - f- - EE - C Program Files x Common Files Adobe Acrobat ActiveX AcroIEFavClient dll O - BHO URLRedirectionBHO - B F A - E - -BA - B E FF - C PROGRA MICROS Office URLREDIR DLL O - BHO IEPlugin - C CD -A CB- D -A F -D F A BE - C Program Files x Symantec VIP Access Client VIPAddOnForIE dll O - BHO Java Plug-In SSV Helper - DBC -A - b-BC - C C C A - C Program Files x Java jre bin jp ssv dll O - BHO... Read more

A:HickJackThis Log -Can't connect to network, can't open network adapter settings

Greetings justreboot and to BleepingComputer's Virus/Trojan/Spyware/Malware Removal forum.My name is Oh My! and I am here to help you! Now that we are "friends" please call me Gary.If you would allow me to call you by your first name I would prefer to do that. ===================================================Ground Rules:First, I would like to inform you that most of us here at Bleeping Computer offer our expert assistance out of the goodness of our hearts. Please try to match our commitment to you with your patience toward us. If this was easy we would never have met. Please do not run any tools or take any steps other than those I will provide for you while we work on your computer together. I need to be certain about the state of your computer in order to provide appropriate and effective steps for you to take. Most often "well intentioned" (and usually panic driven!) independent efforts can make things much worse for both of us. If at any point you would prefer to take your own steps please let me know, I will not be offended. I would be happy to focus on the many others who are waiting in line for assistance.Please perform all steps in the order they are listed in each set of instructions. Some steps may be a bit complicated. If things are not clear, be sure to stop and let me know. We need to work on this together with confidence.Please copy and paste all logs into your post unless directed otherwise. Please do not re-run any programs I suggest. If you encounter problems simply stop and tell me.When you post your reply, use the button instead.In the upper right hand corner of the topic you will see the button. Click on this then choose Immediate E-Mail notification and then Proceed and you will be sent an email once I have posted a response.If you do not reply to your topic after 5 days we assume it has been abandoned and I will close it.When your computer is clean I will alert you of such. I will also provide for you detailed information about how you can combat future infections.I would like to remind you to make no further changes to your computer unless I direct you to do so.Now let's get started ===================================================Now that I am assisting you, you can expect that I will be very responsive to your situation. If you are able, I would request you check this thread at least once per day so that we can try to resolve your issues effectively and efficiently. If you are going to be delayed please be considerate and post that information so that I know you are still with me. Unfortunately, there are many people waiting to be assisted and not enough of us at BleepingComputer to go around. I appreciate your understanding and diligence.Thank you for your patience thus far. While I review our situation please run the below for me.===================================================Farbar Recovery Scan Tool (FRST)--------------------Download Farbar Recover Scan Tool for either 32 bit or 64 bit systems and save it to your desktop <<< ImportantIf you are unsure if you have 32 bit or 64 bit simply download and try one. If that doesn't run properly the other one shouldDouble click the iconClick Yes to the disclaimerMake sure the Addition.txt box is checkedClick Scan and allow the program to runClick OK on the Scan complete screen, then OK on the Addition.txt pop up screen2 Notepad documents should now be open on your desktop.Please copy and paste the contents of both in your reply===================================================System Summary Information--------------------Press the windows key + r on your keyboard at the same timeType msinfo32 and press EnterLeft click on System SummaryClick File, Save, and name the file SummaryZip and attach the file to your reply===================================================Things I would like to see in your next reply. Please be sure to copy and paste any requested log information unless you are asked to attach it. FRST resultsAddition logSys... Read more

http://www.bleepingcomputer.com/forums/t/565566/hickjackthis-log-cant-connect-to-network-cant-open-network-adapter-settings/
Relevancy 46.87%

Our internet service provider updated our internet speed from 100mbps to 1000mbps for no extra cost. We had a Netgear n150 wireless router but it wouldn't support the 1000mbps speed. We were told we needed to upgrade to a r6300 netgear router which is capable of 1000mbps. Now were are told we need to install an ethernet PCI network card or a network adapter. I am told we have to have a 2.0 port for the network adapter to work. It would be cheaper for us to install the internal Ethernet PCI Card, my problem is I don't know which one to buy. I know we need one that is rated 1000mbps, are these universal or will we have to buy one that fits each brand of computer?
 

Relevancy 46.87%

Whenever I take my laptop to school, I can't connect to the wireless network until I reset the network adapter.

When I go back home, it switches to my wireless router without a problem (usually). Sometimes when I change locations while on campus, I have to reset the network adapter again.
 

Relevancy 46.87%

Alright, so sometimes I get network crashes and disabling network adapters appearing randomly, but mostly in minecraft.
I have an HP Pavilion p6-2052sc and I just reformatted my pc and downloaded the 802.11n wireless adapter + some other adapter.

I'm not sure if it is the drivers/adapters, if anybody knows please tell me what drivers/adapters HP Pavilion p6-2052sc has by default. (Only network related or something)
 

https://forums.techguy.org/threads/random-network-crashes-disabling-network-adapter.1045776/
Relevancy 46.87%

Hallo i have a problem with my network card in my laptop. I have acer 7730g. So i connect cable in ethernet card with my router and light blinks fine but no network connection shows in Network Adapters. So here is the pictures in Device Manager:

http://i.imgur.com/GP4VLvl.jpg?1

Probably is Bridge 8280 in PCI ? I dont know . Something must to change but i dont know what.

http://www.sevenforums.com/hardware-devices/386081-network-device-pci-not-detect-windows-network-adapter.html
Relevancy 46.87%

is there any solutions for this problem?
it's really bugging me
i already try to fix it by manage the device manager (network adapters)

A:Problem with wireless network adapter or acces network

Hello razuke, Welcome to SevenForums : Can we get a bit more information to assist you ? Please do this : System Info - See Your System Specs . After updating your profile pls do this to enable us to have information to help you out : Basic Requirements Before Posting your Networking Thread . Thank you , we will try out best to assist you in this issue.

http://www.sevenforums.com/network-sharing/343229-problem-wireless-network-adapter-acces-network.html
Relevancy 46.87%

I have a sony vaio running windows vista home premium My local area adapter is Marvell Yukon E PCI-E Fast Ethernet Connection Although the ethernet cable is plugged in I cannot connect to the internet I am in a college dorm and have tried connecting the laptop to others cables who are not having connection problems Yet my computer still cannot connect Note My computer was NOT having issues a few days ago and had been working fine for a couple of weeks Since then I haven t changed any settings etc etc I have updated the driver for the Marvell Yukon adapter which hasn t rectified the problem I have also tried resetting the winsock catalog I forget the exact name of the commands but there was two of them I typed in using the command prompt Both were completed successfully but did not solve the problem Network Can't the Adapter Network Error- to Connect Vista I have also compared my settings with another recent Marvell Yukon adapter in IPv and IPv with a friend s computer to verify that the same options are selected and they are identical Both Vista Network Adapter Error- Can't Connect to the Network are set up to get automatically assigned IP addresses The exact message Vista Network Adapter Error- Can't Connect to the Network I get when trying to diagnose and repair the local connection is quot Plug cable into the Network Adapter Local Area Connection quot The computer is very new within the past few months and I ve done basic searches of the registry and startup files to see if anything nasty had managed to get in although I would expect much worse problems if that were the case and I haven t found anything Any help or suggestions would be greatly appreciated If there s another thread somewhere with this problem that I missed while searching the site I apologize for the double topic Thank you for your time nbsp

Relevancy 46.87%

I've had my current rig for a couple years now but recently did a clean install of Vista Home Premium x I was previously runnin x with no major networking problems I use my Xbox as a media center Transferring/Streaming Hangs When from Adapter Network Network extender but because Network Adapter Hangs When Transferring/Streaming from Network most of my video files are divx xvid I use TVersity as a transcoder Since intalling x my network adapter would freeze and disconnect while streaming a video to my Xbox Thinking it was a problem with TVersity I decided to use my original Xbox to play the files Unfortunately when FTPing to my Xbox I had the same problem- the network adapter would hang and only recover after a hard reboot It also caused my primary processor core to max out at but there was no process or service shown to still be utilizing the processor I have tried both IE and SmartFTP to rule out a software issue and have used both a network connection w router and a direct crossover cable to rule out the router as a problm I use BitDefender but have also tried it with my firewall turned off Have updated all the relevant drivers and messed around with the NIC speed amp duplex settings with no avail Specs are as follows please help -KW Vista Home Premium x Itel Quad Core ghz gig ram EVGA nVidia i SLI Dual onboard nVidia Network Adapters

A:Network Adapter Hangs When Transferring/Streaming from Network

Hi ConFUZEd wulf,

What type/model of network adapter are you using with Vista64?

http://www.vistax64.com/network-sharing/160881-network-adapter-hangs-when-transferring-streaming-network.html
Relevancy 46.87%

I have a linksys usb600n (v2) using the Win7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.

The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.

SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.

Any ideas?

A:Network Adapter Not Shown in Network and Sharing Center

  
Quote: Originally Posted by dhartmann4030


I have a linksys usb600n (v2) using the Win7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.

The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.

SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.

Any ideas?


Hi dhartmann. Welcome to Windows Seven Forums!

It would seem that your computer is confused!! I would suggest, while the usb adapter is plugged in, you remove all drivers in "Device manager". Then unplug the usb adapter and reboot the computer. After Windows has loaded, check "Device manager" again for any remnants of usb adapter drivers. If it is clean, plug the adapter in again so that the usb driver can install again but this time with only one instance. That should un-confuse your computer and allow the adapter to appear in network adapters again.

Let us know if this provides a solution or if we need to try something else?

Robert

http://www.sevenforums.com/network-sharing/22044-network-adapter-not-shown-network-sharing-center.html
Relevancy 46.87%

I have windows 7 Ultimate installed (was originally installed as a clean install) and have ever since it was RTM. Everything has been running flawlessly and still is except for one thing. My network cards don't show up under Network and Sharing Center, but they do show normally under device manager and my network connection is rock solid. Currenly I'm plugged into a 10/100mb At&t U-Verse Residential Gateway (router). Because of this I can't manage either of my NICs and I can't join my homegroup.

The NICs are intergrated into the motherboard. The NICs are Nvidia nForce adapters.

Does anyone know how I can fix this? Or at least know where I can go to figure this out?

Thank you!!

A:Network Adapter Not Shown in Network and Sharing Center

Have you tried downloading and installing the latest drivers from Nvidia?

http://www.sevenforums.com/network-sharing/74958-network-adapter-not-shown-network-sharing-center.html
Relevancy 46.87%

Is there a freeware program to view WZC profile information from the command line? I found one that allows you to display the profiles themselves, however to display the profile properties I haven't found one.

I could also use direct registry edits if I had to, using the reg command. The problem being, that it would appear that the information is stored in binary format, which I've got no idea how to even manually pull the profile name from. The only thing that information seems to give me, is the abillity to later manipulate the order of the networks, that is maybe. I don't need that part yet, but will later on. I guess, since viewing the profiles is so slow, direct registry edits "might" be preffered. This is WZC I'm concerned about, not any third party utillities. I'm using Windows XP, and it's SP2 or later.
 

A:View Wireless Network Properties from the Command Line

Researching further, it looks like nobody knows how to pull the information from the registry. I've got Windows XP, so netsh wlan won't work. It looks like this is leaving me now with 2 solutions to get some of this information.

Solution 1: Use some kind of programming API to get the information and display it from the command line. I've therefore heard that there seems to be an interface called the WZC native API. If that's true, how would you use it in AutoIt or in a BATCH file or in a VBScript? I've never used anything like it before, so I need detailed explanations of what the code does, except for that doesn't mean I need to know all the internals of every function. But I need to know how to use it. I know BATCH files well, but I don't really know the full VBScript or AutoIt languages, though I can make some of it's code out anyway.

Solution 2: Somehow maybe use AutoIt in another way to read the properties from the dialog box. I know from research that this is probably possible, but I don't know how to do it. And what I need to do, is hide all that visible clicking going on, even if I'm doing some clicking. That is - hide it from the end user. It's nice to see it moving on the screen, but I'd rather not see it if I were the end user, in this case.

Now keep in mind, that at this point, all I'm trying to implement in these programs, is a way to do exactly what you can already do in Windows XP by default (but it has to be compatible with Windows XP Home, Pro, and MCE), except for from the command line. This is just one small part of a larger picture. I'll then be able to use that command in my other parts of my code that I need it in. So my general rule that I need to follow, is if you can't do it in the Windows XP dialog boxes, you can't do it in this program. If you CAN do it in the Windows XP dialog boxes, you CAN do it in this program. But everything is from the command line, in the end result. If Windows XP already provides a command line, which in this case it doesn't, I should use it. If that's not possible, I should use the registry, but I guess that's not possible if nobody knows how. If that's not possible, I guess I'll try to use a VBScript, and if that's not possible, I'll try to use AutoIt. But the end result is a command line program.

I hope this starts to get me down the right track. It took this weekend to find this information so far.
 

https://forums.techguy.org/threads/view-wireless-network-properties-from-the-command-line.774772/
Relevancy 46.87%

Hello: I have three PC?s in my home office connected by a Network.

On one of the PC?s, I see the Network ID is greyed out on ?system properties?.

I already have followed all the known troubleshoot procedures:
1. Enable Network Discovery
2. Uninstall, reboot and install Microsoft Networks Client
3. Run sfc /scannow

However, the Network ID remains greyed out.

Anybody can bring new lights on these.

Thanks

A:Network ID greyed out on “system properties” Windows 7 Ultimate

  
Quote: Originally Posted by Dinamicor


Hello: I have three PC?s in my home office connected by a Network.

On one of the PC?s, I see the Network ID is greyed out on ?system properties?.

I already have followed all the known troubleshoot procedures:
1. Enable Network Discovery
2. Uninstall, reboot and install Microsoft Networks Client
3. Run sfc /scannow

However, the Network ID remains greyed out.

Anybody can bring new lights on these.

Thanks


Please run ?Services.msc? and navigate to Workstation service; ensure the service is enabled and started, or restart the service. Then try again.

Try using a domain administrator account (regarding appropriate permissions for network administration).
The local administrator account only has administrative access to local resources on the PC - i.e. does not have administrative privileges on the network
Regarding access and use of a domain administrator account:
I.e. you're a user at your company - so you should contact your companys system administrator regarding company policy.

I.e. if this is BYOD (your own device) it will probably not be joined to the domain.
If its a company workstation (laptop) - he will rejoin it to the domain.

As a rule of thumb - and may be confusing you here, do not expect yourself - even though a superuser with local administrative privileges - to finalize redeployment of windows, apps and data in a company domain. I.e. in a company you usually don't control access to payrolls etc. (you should not have that kind of administrative configuration access - even if a company owner you could mess things up giving "unauthorized" access. Even a domain administrative account is not used as a "user" account - only configuration). I.e. with user accounts i.e. local administrator you don't control access to private network ressources in the company. I.e. you cannot join network ressources - joining to a domain means connecting with the private web service in the company basically controlling identification and internal access to company wide resources. So that service hides some complexity as well.

Delegate the job to your companys system administrator and let him complete the work if this is a company workstation
... that you may have reinstalled yourself using the local administrator account without using the companys deployment services - i.e. automated deployment (i.e. PXE network boot to the companys Windows Deployment Services or Symantec Altiris etc.). If no automated deployment is available at your company then the component (responsibility) of deployment services are manually executed by the system administrator (automated deployment availability at your company will typically depend upon complexity i.e. the number of computers owned by your company - but even for a small number of workstations the benefit of Windows Deployment Services is great ...)
Basically, the finalization of software configuration for a company managed computer must in part be managed by the system administrator, i.e. rejoining the computer to a domain - which effectively means the administration of the computer from this point on is delegated to the domain controller and thus automated management of i.e. authentication and authorizations.

http://www.sevenforums.com/network-sharing/366038-network-id-greyed-out-system-properties-windows-7-ultimate.html
Relevancy 46.87%

i have a laptop Toshiba A200-13R (core duo 2.0(T2450) ghz, 512+2 Ram
(667mhz) 160GB hdd). As a factory product it came with vista home basic. I
installed xp proffessional as dual os. Both were working fine. 3 days before
i have bought ram to upgrade but that is bad system was giving plenty of
errors so i replaced the old Ram. after that if i connect the network cable
before starting the system it is working fine. if i start without network
cable connected system is neither opening the network connections nor the
system properties. i tried the following

* Restored from the restore points before upgrading the ram
* Tried to reinstall the LAN Driver it's not able to update the driver
* Tried to update windows xp but it's not responding and staying the step
Collecting informations for ever.

so please help me
 

https://forums.techguy.org/threads/xp-prof-not-able-to-open-network-connections-and-system-properties.622399/
Relevancy 46.87%

Originally posted by navguy how can i fix the following error message quot the system cannot log you on this domain because the systems computer account System of Network Properties Win2kPro: Missing Identification Tab out in it s primary domain is missing or the password on that account is incorrect quot I have already created user accounts on the pdc but i cannot logon using my domain admin account I logon using the local sys admin account and i can see the domain controller and all it s shared files but when i try to log in using my domain account i get the message above Any help would be appreciated Navguy I was able Win2kPro: Missing Network Identification Tab out of System Properties to fix the problem For those that Win2kPro: Missing Network Identification Tab out of System Properties ever see the problem here is the fix just remove you workstation from the domain and then add it to the domain again Right click network neighborhood in the identification tab click on change then just click on workstation apply you do not have to reboot then just click on change again then add it to the domain and that s it Click to expand Well has anyone ever seen a W K Pro computer in a similiar situation with the identification tab missing I am able to log on as the local admin so I can change the computer name to join the domain but the tab is missing I know I am in the right spot but not sure why it s not Thanks nbsp

A:Win2kPro: Missing Network Identification Tab out of System Properties

https://forums.techguy.org/threads/win2kpro-missing-network-identification-tab-out-of-system-properties.150673/
Relevancy 46.87%

Hi Team,

I have a problem with my Local Area Connection. I have installed the driver correctly and can access the internet also. But when I go to Open Network and sharing center -> change adapter setting -> I can not see Local Area Connection icon appear. My OS is windows 7, HP System.

A:Local area connection is not showing in network properties

Welcome to Seven forums mail.

Can you please post a picture of Device manager and a picture in the adapter settings where your local area connection should be?

http://www.sevenforums.com/network-sharing/331350-local-area-connection-not-showing-network-properties.html
Relevancy 46.87%

English is not my native tongue Network printer issue properties/advanced settings I apologize for any misspells or Network printer properties/advanced settings issue similar in advance I m connected to a Konica Minolta C network multifunction printer I have never had any similar issues with any other of my printers Let me also say I work in traditional Desktop view I have no issue printing not once did it refuse a print job Issue below are not tied to a specific software I ve experienced it in software from at least Microsoft Autodesk Adobe Foxit When opening Print Dialog I am mostly not allowed to go to Printer Properties Printer Advanced Settings I say mostly because every now and then I am allowed When hitting the Properties button my system freezes A popup dialog box appears stating different things but the last couple of times it has been A RPC Remote Procedure Call could not get through Or similar remember I m not using an Network printer properties/advanced settings issue English system I hit OK At this point the software is frozen and locked I have to go via Task Manager and Kill Task Meanwhile all other running programs are not affected So the story above could just as well include a slightly different popup dialog box message but the problem is the same I can always print with my standard settings but if I want for example multicolour or duplex I have to have a separate printer installation for that So if I go to my Control Panel - gt Units and Printers I do actually face the exact same problem I enter C Printer Settings but if I now try to go to Printer Properties Printer Advanced Settings everything freezes for a second flashing in system background colour and I m back to Desktop view Then if I update reinstall my printer driver everything suddenly works like a charm I don t really know if it works for a specific amount of times entries a specific amount of time or until next system restart As said I could make a number of printer installations like Simplex B W Simplex Colour Duplex B W and Duplex Colour But I want to understand what is wrong too Win x C driver Resultat av download - KONICA MINOLTA Sverige Thank you so much for your interest in my problem

http://www.eightforums.com/drivers-hardware/32297-network-printer-properties-advanced-settings-issue.html
Relevancy 46.87%

I'm running windows 2000 server with SP2 on a Compaq Proliant 1600 with an embedded NIC. I noticed that the ethernet adapter does not show up in the My network places properties. I have tried to get it back with tweekUI, Removing it from Device manager and reinstalling it, and ran an in-place upgrade. I have also disable the embedded NIC and tried adding a new PCI ethernet adapter, it too fails to show up. I can see the card in the command line. I have tried the netsh command to tie an IP address to the adapter and made it persistant, but the changes are lost on mandatory reboot. In order to keep the server up and running I have made it a DHCP client so I can use the machine. All comments are welcome on this one.
 

A:NIC card doesn't show in My Network Places properties

**** UPDATE **** I found a MS KB article on this and it was the dcom issue that eas the problem
http://support.microsoft.com/?kbid=254631:cool:
 

https://forums.techguy.org/threads/nic-card-doesnt-show-in-my-network-places-properties.120098/
Relevancy 46.44%

Hello I know this is a long shot I m staying in what s basically a hotel for the next couple months I was properties - Internet to access can't but network, network Connected access no on their free wireless Connected to network, but no Internet access - can't access network properties networks up until a couple of days ago when it just cut off my internet access all of a sudden They have confirmed it s nothing on their end My roommates have had steady access on their computers no problem my iPhone as well I obviously have no access to their modem to make issues more difficult when I right-click any of the network connections a dialog box will appear but all the menu options are blank I can t do anything to the connections except rename them Anything else yields a message box with no message if there s any other way to access the TCP IP properties that would be great Right-clicking the connection and clicking properties is the only way I know of I have tried winsock repair uninstalling reinstalling wireless driver and just about everything else I could think of ipconfig all gives me the following output Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users Owner gt ipconfig all Windows IP Configuration Host Name Owner-PC Primary Dns Suffix Node Type Mixed IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List bc hsia telus net Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix bc hsia telus net Description Atheros AR Wireless Network Adapter Physical Address - - - - -BB DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ee bcd Preferred IPv Address Preferred Subnet Mask Lease Obtained July- - PM Lease Expires July- - PM Default Gateway DHCP Server DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Anchorfree HSS Adapter Physical Address -FF- - - - A DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description TAP VPN Adapter Physical Address -FF-E - - B-A DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek RTL E Family PCI-E Fast Ethern et NIC NDIS Physical Address - E- - B- -EB DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap cgocable net Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap McMaster CA Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap EB EB - D- C - B -CDD br B Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap no-domain-set bellcanada Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap FE-CEA - DD-B CE- CA C br D E Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap E BA - D E- C A-AD -B br E F Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - E- DHCP Enabled No Autoconfiguration Enabled Yes IPv Address e c b ecb b c ... Read more

A:Connected to network, but no Internet access - can't access network properties

Appears you are on Vista ( Microsoft Windows [Version 6.0.6001] )

and running from an Admin Login (ie Owner and other than maintenance, you should be using a Limited Account, eg: UAC but solve that latter)

Disconnect from the router
Goto Control Panel > Network and Internet > Network Connections.
Right click on ?Local Area Connection? & click ?properties? option.

scroll and find the Internet Protocol V6
clear the [x] preceeding that line
click ok

get a command prompt (run->cmd) and enternetsh int ip reset
netsh interface ip delete arpcache
ipconfig /flushdns

 

http://www.techspot.com/community/topics/connected-to-network-but-no-internet-access-cant-access-network-properties.149976/
Relevancy 46.44%

This single computer on my network loses DNS information every time Windows auto-updates, thus losing connectivity. When I go to Network Properties, the DNS fields are blank. Updates are the only time this happens, and this is the only machine it happens on. I simply reset the settings, and everything is fine ... until the next update.

I am assuming there is some setting on this box that does this. Is anyone familiar with this situation, and can you point me in the right direction?

Thanks,

TBF

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 4 Stepping 9
Processor Count: 2
RAM: 502 Mb
Graphics Card: Intel(R) 82915G/GV/910GL Express Chipset Family, 128 Mb
Hard Drives: C: Total - 1430765 MB, Free - 1403851 MB; I: Total - 305195 MB, Free - 290812 MB;
Motherboard: Dell Inc., 0JC474
Antivirus: None
 

https://forums.techguy.org/threads/network-properties-dns-info-blanks-after-windows-auto-update.1057277/
Relevancy 46.44%

I wonder how I can disable my wireless network and view their WAN or Lan properties in windows 7. I can do it in windows xp myself though.

A:How I can disable/enable wireless network and view properties of Lan connection?

Hi have you looked in device manager

http://www.techsupportforum.com/forums/f217/how-i-can-disable-enable-wireless-network-and-view-properties-of-lan-connection-557333.html
Relevancy 46.44%

So on windows 7 when you "Manually create a network profile" and close you can see a list of on networks via the gui and modify them as needed. However i am unable to find this on windows 8 and newer. I know the profile is there via the command
"netsh wlan show profiles" but am unable to get back into the properties in the gui.
Please advise.

https://social.technet.microsoft.com/Forums/en-US/964e429f-678b-4d25-bf88-88d40b7677e5/create-network-profile-then-close-unable-to-get-back-to-properties?forum=w8itprogeneral
Relevancy 46.01%

Computer Info:

Emachine T3065
CPU: AMD Athlon? XP 3000+ Processor
QuantiSpeed? Architecture operates at 2.167GHz
512KB L2 cache & 333MHz FSB
Operating System: Genuine Microsoft? Windows? Vista Ultimate
Chipset: NVIDIA? nForce?2
Memory: 512MB DDR (PC 2700)
Expandable to 2GB
Hard Drive: 160GB HDD (7200rpm)
Optical Drive: 48x Max. CD-RW Drive; 16x Max. DVD Drive
Media Reader: 8-in-1 Digital Media Manger (USB 2.0, Secure Digital? (SD), Smart Media, Compact Flash, Memory Stick?, Memory Stick PRO, Micro Drive, Multimedia Card)
Video: NVIDIA? GeForce?4? MX graphics (1 AGP 8x slot available)
Sound: nForce? 6-channel Audio
Network: 10/100Mbps built-in Ethernet
Modem: 56K ITU v.92-ready Fax/Modem
Peripherals: Premium Plus Multimedia Keyboard, 2-Button Wheel Mouse, Amplified Stereo Speakers
Ports/Other: 5 USB 2.0 ports (4 in back; 1 in Media Reader), 1 Serial, 1 Parallel, 2 PS/2, Audio-In & Out
Dimensions: 7.25"W x 14.125"H x 16"D
Having trouble connecting to the internet. Any network does not show. So can't view properties. Please help. Thanks!

A:Network Adapter Not Visible In Network Connections

Could it be disabled in the BIOS? Have you tried resetting the BIOS to default/safe values?
Can you try another network card (they're fairly cheap)?

http://www.bleepingcomputer.com/forums/t/148117/network-adapter-not-visible-in-network-connections/
Relevancy 46.01%

I am trying to reserve an IP for my computer but when I went to the Connection with issue protocols, missing and services Network Properties clients, properties of my wireless network connection the connection properties window is Network Connection Properties issue with protocols, clients, and services missing missing everything except for Client for Microsoft Networks Even the connect using field has nothing Network Connection Properties issue with protocols, clients, and services missing in it The wireless connection is working but I can t get to the TCP IP protocol to reserve the IP instead of using DHCP Here is an image of the issue An screen cap of my wireless network connection properties can be seen here http i photobucket com albums hh gremmie untitled jpg Has anyone ever seen this Any ideas to fix it Thanks for any info EDIT I forgot to mention that when I click the install button and click either client service or protocol I get an error message that says quot Could not add the requested component The error is The system cannot find the file specified quot so I can t reinstall the TCP IP Protocol to reserve the IP nbsp

A:Network Connection Properties issue with protocols, clients, and services missing

Click on install then choose protocol then add and see....
 

https://forums.techguy.org/threads/network-connection-properties-issue-with-protocols-clients-and-services-missing.692118/
Relevancy 44.29%

Referred from here http www bleepingcomputer com forums t experiencing-rundll-error-windows-on-start-up OBThis all started when my BF clicked on a fake virus alert He scanned the computer right away with MBAM and caught various things but even when we rebooted webpages Properties for Network start windows locked, up, error Rundll and Connections redirect. open on certain programs couldn't start up Firefox was fixed with help from the apartment complex's service provider but SAS couldn't get Updates and I've had to reinstall AVG Free Ed I've also reinstalled IE and Yahoo IM which were outdated and had start up and log in problems because of the infection Uniblue Registry Booster does not seem to have any problems starting and Properties for Network Connections locked, Rundll error windows open on start up, and webpages redirect. functioning Since then I've caught a few things with MBAM SAS and AVG but the system is definitely not clean yet I still get redirects and trojans or roguewares pop up from time to time that are caught by AVG FREE EDITION While trying to get rid of the RUNDLL error windows with Moderator boopme I discovered I could not access the Properties button or Right-Click Properties for Network Connections A Network Connections window pops up that says unexpected error occurred I was instructed to post here using - of the Preperation Guide I tried to make a GMER log but the Properties for Network Connections locked, Rundll error windows open on start up, and webpages redirect. first time through AVG prevented it from going past a certain point After disabling AVG temporarily it finished quickley but froze before I could save the log and while I was trying to enable the AVG Resident Sheild The third scan took much longer than the second scan but ended in a blue screen that said there was a problem detected and that Windows had to shut down to prevent damage A file was listed pwtdipog sysUnder it was PAGE FAULT IN NONPAGE AREARestart instructions were included there after followed by Technical Information whiich I can post if needed Here are my logs from Steps DDS Ver - - - NTFSx Run by Gina at on Thu Internet Explorer BrowserJavaVersion Microsoft Windows XP Home Edition GMT - AV AVG Anti-Virus Free On-access scanning enabled Updated DDD - FF- F- E B- D D BF Running Processes C WINDOWS system Ati evxx exeC WINDOWS system svchost -k DcomLaunchsvchost exeC WINDOWS System svchost exe -k netsvcsC WINDOWS system svchost exe -k WudfServiceGroupC Program Files AVG AVG avgchsvx exeC Program Files AVG AVG avgrsx exeC Program Files AVG AVG avgcsrvx exesvchost exesvchost exeC WINDOWS system spoolsv exeC WINDOWS system Ati evxx exeC Program Files Uniblue RegistryBooster rbmonitor exeC WINDOWS Explorer EXEC Program Files ATI Technologies ATI ACE cli exeC PROGRA AVG AVG avgtray exeC WINDOWS system ctfmon exeC Program Files Adobe Acrobat Reader reader sl exesvchost exeC Program Files AVG AVG avgwdsvc exeC Program Files Java jre bin jqs exeC Program Files Common Files Microsoft Shared VS Debug mdm exeC WINDOWS System svchost exe -k HPZ C WINDOWS System svchost exe -k HPZ C Program Files Alcohol Soft Alcohol StarWind StarWindService exeC WINDOWS system svchost exe -k imgsvcC Program Files AVG AVG avgnsx exeC WINDOWS system wuauclt exeC Program Files ATI Technologies ATI ACE cli exeC Documents and Settings Gina Desktop dds scr Pseudo HJT Report uStart Page hxxp neko-sentai com uSearch Bar hxxp us rd yahoo com customize ie defaults sb msgr http www yahoo com ext search search htmlmStart Page hxxp www yahoo comuInternet Settings ProxyServer http uInternet Settings ProxyOverride uSearchURL Default hxxp us rd yahoo com customize ie defaults su msgr http www yahoo comBHO D -C F - efb- B - ECA - No FileBHO Adobe PDF Reader Link Helper e f-c d - d -b d- b d be b - c program files adobe acrobat activex AcroIEHelper dllBHO AVG Safe Search ca f - f e- b -a e- e e c c - c program files avg avg avgssie dllBHO Skype add-on for Internet Explorer ... Read more

A:Properties for Network Connections locked, Rundll error windows open on start up, and webpages redirect.

Hello Kou_Kagerou, My names Syler and I will be helping you to solve your malware issues. Sorry for the delayin replying, we are very busy at the moment.Please note we are very busy, so if I don't hear from you within 5 days the topic will be closed, If you have since resolved your issues I would appreciate if you would let me no so I can close this topic.Download and Run MBR Rootkit Scan Please download MBR Rootkit Detector and save it on your desktop. Go to Start >> Run then copy and paste the following line into the run boxcmd /c "%userprofile%\desktop\mbr.exe" -t& start mbr.log Select Run when you recieve a Security Warning The process is automatic, a black DOS window will appear and disappear suddenly. This is normal. A log file will the be created on your desktop where you ran mbr.exe from. Copy and paste the contents of mbr.log on your next reply.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Under the Custom Scans/Fixes box at the bottom, paste in the following bold text.%systemroot%\system32\*.dll /lockedfiles%systemroot%\Tasks\*.job /lockedfiles%systemroot%\System32\config\*.sav%systemroot%\*. /mp /s%SYSTEMDRIVE%\*.exenetsvcsmsconfigdrivers32CREATERESTOREPOINTPush the button.Two reports will open, copy and paste them in a reply here:OTL.txt <-- Will be openedExtra.txt <-- Will be minimizedThen please post back here with the following logs: MBAM log mbr.log OTL.txt Extra.txtThanks

http://www.bleepingcomputer.com/forums/t/333978/properties-for-network-connections-locked-rundll-error-windows-open-on-start-up-and-webpages-redirect/
Relevancy 43.86%

Hi I have a folder of home videos that I 6.41Gb says says folder 2.67Gb, properties properties *.* back up to a USB key with Syncback The key is nearly full and I'm trying to reduce the size of that folder But here's the thing If I folder properties says 2.67Gb, *.* properties says 6.41Gb right-click on my 'Home videos' folder and select 'Properties' it tells me I have files in folders taking Gb However if I open the folder and search for to show all the files then select all right-click 'Properties' it tells me I have files in folders taking Gb Still at the bottom of the Windows Explorer window it says items selected This is the case on both the folder in My Documents on the PC and also the matching folder on the USB key Treesize also shows Gb for both folders In fact as far as I can figure what with everything else on the same USB key there wouldn't even be room for a Gb folder I've tried showing both hidden and system files and folders but there's nothing extra to see Can anyone please explain this anomaly I must be doing something wrong but I can't figure it out

http://www.sevenforums.com/general-discussion/399832-folder-properties-says-2-67gb-properties-says-6-41gb.html
Relevancy 43.43%

Hi,

For several days my wireless connection has been connecting and disconnecting. Today I tried connecting to wireless and cannot actively see any wireless networks available. My wireless switch is on and is showing a blue light and Network Adapters in Device Manager show no warnings however when I run diagnose in Network Sharing Centre it tells me that Network Adapter "Wireless Networks Connection" is not connected.

The Wireless Router is fine and another laptop and iPad seem to have no problems connecting to it please could you advise?

I am running Windows Vista on a Vaio VGN FE41S

Many thanks,

J. Smith
 

A:Network Adapter "Wireless Network Connection" Problem for VGN FE41S

would you post the following tests when the internet is working OK, and then repeat ALL the tests when the internet disconnects.
Make sure you also indicate on the reply which tests are for what condition.
please include the xirrus screen shots for both conditions - see how below.

Please post back here the make and exact model of the router and if you have a separate modem, the make and exact model of the modem.

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, Mcafee , AVG etc

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
The results from the notepad should now appear in the forum reply.
------------------------------------------------------------------------

------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

Start> Run {search bar in Vista/W7}> type CMD to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

Type the following command
Ping {then a space and then add the number that is shown against the item labelled "default gateway" shown in the results from the ipconfig /all}
Post back the results in a reply here
right click in the command prompt box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping google.com
Post back the results in a reply here
right click in the command prompt box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping 209.183.226.152
Post back the results in a reply here
right click in the command prompt box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste
For your information only
these tests will check various stages of the connection, the first ping test, ping default gateway checks to see if you still have a connection to the router.
The next two Ping google.com & Ping 209.183.226.152 tests the connection to internet. google is to test by name and the ping test using a number is checking that a connection exists without DNS.
these tests then confirm if there is a dns issue on the connection.Click to expand...


---------------------... Read more

https://forums.techguy.org/threads/network-adapter-wireless-network-connection-problem-for-vgn-fe41s.1069737/
Relevancy 42.57%

my girlfriend just sent her laptop away to be fixed now that she has got it back it does not show at wireless networks and wont connect to the internet i had a look and there is no network adapter installed. I dunno where to look for one so it would be helpful if somebody could point me in the right direction

its a packard Bell and windows vista
 

Relevancy 42.57%

Hello, I was given a laptop recently as a gift, an HP Pavilion dv7, but only just now sat down to mess with it.  The laptop has been reset and there's apparently not a network adapter installed, because I cannot connect through wired or wireless connection and all of my attempts to find the network adapter has failed (it's not in the device manager for instance).  I'm really not at all knowledgable about this sort of thing.. how do I acquire a network adapter and fix this?  Thank you.

A:No Network Adapter??

Hi, What is your Pavilion dv7 ?  Please use the following instructions to find out the model/product of your machine:  http://support.hp.com/us-en/document/c00033108Regards.

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/No-Network-Adapter/td-p/5588320
Relevancy 42.57%

Well I installed Windows 7 on my computer, today, it went smoothly it internet was working fine thought the install, but when I booted it up after the install it can't connect to the internet and it says something like Please update Network Adapter Driver, please help, I am on a different computer now so I can connect to the internet.

A:Need network adapter?

Hello. First of all you need to update your system specs so anyone can helps you about the driver that you need. Also you can try updating driver via device manager.
Start->Control Panel->Device Manager. There expand Network Adapters,and click on it with right click and select Update driver software.

http://www.sevenforums.com/drivers/149600-need-network-adapter.html
Relevancy 42.57%

I just today have purchased a playstation 2 network adapter. i stuck it on the ps2 and got it all hooked up. So far all is going well. I shove in the setup disc and am not confused a bit. I put in all the necessary info (dial numbers, isp etc.) but the isp seems to be the problem. I can connect on it, but when it gets done dialing it says "Authentication Failed" I am pretty sure that this has something to do with my msn login (that i previously put on there). I dont know exactly what to put there. i thought it would be my email address. I am using msn 8 as my isp.

PLEASE HELP. thanks
 

Relevancy 42.57%

hello everyone ;

i want to download Atheros AR5007EG Wireless Network Adapter ,which work well .... coz last time i had one but not worked at all ...

help me please if you have idea about that

A:i need network adapter!!

Hi cutejaja. Please fill out your system specs.
I see the XP driver, which does not help you.
ATHEROS Wireless LAN 2.4/5GHz - Download Driver AR5007EG
Don't see Win 7 drivers for any of their cards
ATHEROS drivers for Microsoft Windows
Are you saying it did work at one time with Windows 7?

http://www.sevenforums.com/drivers/110211-i-need-network-adapter.html
Relevancy 42.57%

I've just installed Windows onto my laptop on a to network can't My used be adapter seem new hdd and I can't seem to connect or even see my wireless network using my built-in wireless network card I have used this same laptop to My network adapter can't seem to be used connect to networks My network adapter can't seem to be used with no problem before My wireless network has not been changed since I connected to it successfully before on my other HDD I am able to use the wireless network on other Windows My network adapter can't seem to be used PCs and laptops in my house I've been using a usb dongle as my wifi card but it's very unreliable I've tried using windows update to find updated drivers I've ran it a few times now both with using my usb netgear dongle amp a wired connection I borrowed the cable I cannot use it permanently I've tried uninstalling deleting the device hoping it would reinstall properly but nothing's changed at all Tried disabling reabling I've checked the Device Manager to see if it had the exclamation mark on it but it doesn't Although there seems to be another unknown device which I don't know what would be I was thinking maybe something physical is loose since I took apart my laptop the other day to remove the broken screen I didn't know what I was doing and I opened it up a bit more that I needed to I don't think anything got disconnected since I only opened the main big section inside maybe an inch My laptop seems to recognise the network card as being there just fine though so I don't think it's damaged or disconnected Any help would be very much appreciated as I've just fixed up my laptop and this is the last thing I need for it to be up and running fully

A:My network adapter can't seem to be used

Welcome to SF,

Is there a physical switch to turn the wireless on/off? Have you tried the combination FN+F2 or F8 or F9 keys?

Is WLAN Auto config Service enabled? Type services.msc press enter and locate this Service.

Click on Start => in run or search box type cmd, press enter. From the command prompt (black screen), Copy and Paste these ipconfig /all >c:\ipconfig.txt . Please attach the .txt file to be found in your Local Disk 'C' on your next post.

http://www.sevenforums.com/network-sharing/180100-my-network-adapter-cant-seem-used.html
Relevancy 42.57%

1 of the guy who was helping me .....said to make a thread abt this one.....on this section..as it didnot much help wther i was infected or not...Link to the original Thread:http://www.bleepingcomputer.com/forums/t/244075/network-issueinfected-or-not-reopened/-help me!!!!

A:network adapter comes and goes?

Well...we will try .

First of all, is this a wired or wireless connection you have?

Computer manufacturer and model? Example: Dell Dimension 123.

OK, please go to Device Manager (Start/Run...type devmgmt.msc and hit Enter)...and click on your network adapter.

On the Driver tab...post all the information reflected which appears on that tab, above the button Driver Details.

Are there any yellow markings which appear in Device Manager? These indicate problem devices. If so, post the description you see.

Louis

http://www.bleepingcomputer.com/forums/t/245772/network-adapter-comes-and-goes/
Relevancy 42.57%

I need help with my PS2 Network Adapter. I have a D-Link Router connect to another computer in the house and a phone cord... I dont have one of those ethernet cables and I cant get the ISP set up to work...
 

A:PS2 Network Adapter Help

well, you need the cat5 cable to be plugged into the router and the network adaptor to make it work. the cable should be about $10
 

https://forums.techguy.org/threads/ps2-network-adapter-help.319414/
Relevancy 42.57%

Alright, I was not on my computer for maybe 2-3 days and my internet was working fine before but now its not connecting at all when i troubleshoot it tells me i need to install a driver for my network adapter. I've tried downloading it from the website Dell and it still dosent work. My internet is up and running on my laptop but i need it on my desktop.

In device manager it does not show a Network Adapter tab so im not sure what im suppose to do.

AMD Athlon II x2 245 Processor 2.90GHz
4.00GB Ram
64 bit
Dell Insiprion 570
ATI Radeon 4200

A:Network Adapter

So your internet has been working on your desktop? What's the range between the computer and the router? How many walls does it pass through?
Also check that the drivers you are downloading are for the exact same router you have!
Also try downloading the latest Windows Updates.

http://www.sevenforums.com/drivers/245274-network-adapter.html