Windows Support Forum

Is this Realtek wireless adapter really a 300Mbps device?

Q: Is this Realtek wireless adapter really a 300Mbps device?

I bought a cheap, unbranded wireless adapter off the net, the chipset for which is REALTEK 8191.

The specification states - Data Rate: 802.11n up to 300Mbps (downlink) and 150Mbps (uplink).

Whenever I look at the status of the device, it either reports a speed of (more often than not) 135Mbps, or occasionally 150Mbps; yet a Netgear WNA3100 adapter that I have can report speeds of up to ~280Mbps when connected.

Is it likely that this Realtek adapter isn't really a 300Mbps device?

Thanks for your thoughts.

Relevancy 100%
Preferred Solution: Is this Realtek wireless adapter really a 300Mbps device?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Is this Realtek wireless adapter really a 300Mbps device?

Manufacturers can play a lot of games with performance specifications. They specify 300Mbps but that would be achievable only under ideal conditions not normally seen in the real world. And as this is a cheap unit the specification may be highly optimistic.

http://www.sevenforums.com/network-sharing/342431-realtek-wireless-adapter-really-300mbps-device.html
Relevancy 24.08%

Something like this but with a thin male connector. I need it to connect flash drives to a usb port where there's little space available around the usb port because the ports around are busy (happens in MacBook air for example).

 

A:I need a usb to usb cable adapter with thin male end

I think you're talking about a USB to Lightening converter
 

http://www.techspot.com/community/topics/i-need-a-usb-to-usb-cable-adapter-with-thin-male-end.217601/
Relevancy 26.66%

Hi everyone A few days ago I replaced my cpu motherboard and hdds on my system OLD System main components Case Antec v Cpu i Mobo Asus onboard realtek mobo low crackling) bk volume (very ud3h sound ac1150 issue - and Gigabyte p x d-e RAM corsair vengence gb x GPU Zotac GTX Boot drive Intel Gigabyte ud3h bk mobo - realtek ac1150 onboard sound issue (very low volume and crackling) gb ssd Win HDD WD TB black New System main components Case Antec v Cpu i k Mobo Gigabyte z x - ud h-bk RAM corsair vengence gb x GPU Zotac GTX Boot drive Samsumg evo gb ssd Win HDD WD Gigabyte ud3h bk mobo - realtek ac1150 onboard sound issue (very low volume and crackling) TB black I was able to clone the ssd and hdd samsung migration for ssd and Easeus todo backup for hdd Initally I had some driver conflict when I Gigabyte ud3h bk mobo - realtek ac1150 onboard sound issue (very low volume and crackling) booted up the computer on the new mobo I managed to uninstall all the old drivers and then used the driver cd to install the mobo drivers and even updated all of them to the latest version I The conflict I m still having is with the back panel audio for the onboard sound I get very low volume and and crackling at certain frequencies tried on both my generic creative speaker and Audio technical headphones When I m plugging in the speaker into the green port and have it plugged in half way or accidentally touch the jack to the I o plate I get really strong loud static noise Here is the list of solution that I tried with no success Updated the Realtek HD Audio Manager app I e the one installed from the driver cd to the latest one Used DPC latency checker and it is showing all greens didn t test it for more than a minute though should I be doing something while the app is on to test for interference Installed Generic Realtek driver for ac codec Disabled C E and EIST in the bios Played with the equalizers on Realtek HD Audio Manager helped to reduce bit of static but its still there and the volume is still very low Disabled all line in devices Checked audio with a ubuntu live cd and the problem still persists does this indicate a hardware issue What I find strange is that my front panel that is connected to the HD audio pins on the motherboard works fine with the same speaker and headphones I still have some more solutions I need to test out like Update the bios currently on F version the latest is F I have a spare asus xonar dg PCI so will try to install it and test if audio will works fine But this is not a permanent solution as I only have one PCI slot which I m using for my wireless card adapter Edimax g Run Memtest can this ever be a problem for sound related issues Driver Sweeper I believe I have properly manually uninstalled all the mobo drivers but going try this app to be sure Can someone please point me in the right direction on how to solve this This is the first time I m installing replacing a mobo and cpu so should check if there is a wiring issue when I replaced all the parts back into the case Please let me know if more information is need to help resolve this I have a few more days left incase I have to RMA the mobo so any pointers would really be helpful before I decide to send it back if at all TIA Sreejit S nbsp

http://www.techspot.com/community/topics/gigabyte-ud3h-bk-mobo-realtek-ac1150-onboard-sound-issue-very-low-volume-and-crackling.217321/
Relevancy 17.63%

Samsung has announced a new pair of monitors today that both feature Qi wireless charging in their stands, allowing you to easily charge your Qi-compatible smartphone on your desk without the clutter of a separate charging plate.

Read more
 

A:Samsung's new range of monitors feature Qi wireless charging

Yeah...that's awesome. That's actually where I place my phone anyway
 

http://www.techspot.com/community/topics/samsungs-new-range-of-monitors-feature-qi-wireless-charging.217292/
Relevancy 42.57%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
 

http://www.techspot.com/community/topics/problems-with-wireless-network-adapter.188964/
Relevancy 28.38%

Every 10 seconds audio manager will set the volume on my mic to 0 and mute it I have already tried to uninstall it and reinstall it but no result.
It may be malware but I am not sure as of yet. Would really appreciate help right now.
 

A:Realtek Audio Manager Mic Problem

Problem Solved, As suspected it was malware. To fix this launch task manager, then go to start up, go through the list if something dosn't have a icon or dosn't seem to fit in right click and open its file location. If you are definite that it is malware disable it, restart go to the file location and delete all the files.
 

http://www.techspot.com/community/topics/realtek-audio-manager-mic-problem.216938/
Relevancy 17.63%

When I try and access the internet through any of the main browsers (I.e. Internet Explorer, Google Chrome, Firefox and Safari) they tell me along the lines of 'unable to access the network' and 'this page can't be displayed' after taking a while attempting to load. I also cannot access it through any of my Windows 8 apps. I know it's not an issue with the home broadband itself and is something to do with my laptop as it is running fine both wirelessly and through using an Ethernet cable on all other devices. I would really appreciate some help with trying to fix this asap as I have spent a lot of time researching this issue and trying most things to resolve it without success, I also need to use the internet for loads of coursework over the summer hols and cannot afford to be taking it to a pricey IT technician. Please helppp
 

A:My laptop cannot connect to the internet, even though wireless and ethernet are working

Take a look at the file
\windows\system32\drivers\etc\hosts​there MUST be at least a line reading 127.0.0.1 LOCALHOST
but the question is there anything other than comments in it?
If so, leave the comments and the localhost line and delete everything else.

If you modify the hosts file, then you also need to

ipconfig /flushdns
net stop "dns client"
net start "dns client"

 

http://www.techspot.com/community/topics/my-laptop-cannot-connect-to-the-internet-even-though-wireless-and-ethernet-are-working.195158/
Relevancy 17.63%

SanDisk has come up with a clever take on a common PC accessory that kills two birds with one stone. Its new wireless mobile flash drive is designed to make it easier to transfer files between devices while simultaneously extending...

Read more
 

A:SanDisk's new wireless flash drive kills two birds with one stone

"...when you consider micro SD card slots on smartphones are on the way out."

Just because a prominent phone maker decides to experiment by not including the microSD slot, does not mean this tech is on the way out. There is REAL need for this, and if the big S doesn't want to include this in their phones, people will find other phones that do have this capability.
Lets not forget just how bad sales were/are for the S6.
 

http://www.techspot.com/community/topics/sandisks-new-wireless-flash-drive-kills-two-birds-with-one-stone.216608/
Relevancy 50.31%

Hello,

first I already wanna thank everybody who replies to this and try to help me. Yesterday morning I tried to download a sound driver that would make the Stereo Mix option available. It was not from the original website of Realtek or HP. It was from here: http://driveragent.com/c/archive/196a161c/Realtek-High-Definition-audio#summary. After I finished the installation and restarted my PC there was a red cross next to the sound icon and when I tried to open volumemixer it said 'No audio output device installed'. I tried to uninstall it with system restore. Than I also tried to install the latest sound drivers from the Realtek and HP site but both didn't work. Also I saw on another topic that maybe some services were stopped but that wasn't. Now I really don't know what to do. Hope someone can help me.

Tsjeuke

PC manufactrurer: HP
Operating system: Windows Vista Home Premium SP2 32-bit
 

A:There is no output device (Realtek HD Audio)

Your PC manufacturer is HP but what is the model?
 

http://www.techspot.com/community/topics/there-is-no-output-device-realtek-hd-audio.216620/
Relevancy 18.49%

Specs Windows Home Premium ASUS Notebook G Series Intel Core i CPU Q GHx GB of ram Atheros off capability turning keeps Wireless AR Wireless Network Adapter Hello For the last two weeks my laptop has been having troubles with its network adapter Atheros AR Wireless Network Adapter Every time my computer starts up from sleep mode or just a normal start up my icon in the bottom right hand corner shows a black box with Wireless capability keeps turning off a plug in it and says no network connection available I then proceed by opening up the quot Network and Sharing Center quot clicking on the quot Change Adapter Settings quot button in the top left corner right click on the quot Atheros AR Wireless Network Adapter quot icon and selecting quot Diagnose quot The diagnostic runs and asks me if I would like to turn on my wireless capabilities I click the quot Apply Fix quot button and it turns on my Adapter Here s the Detection Details Diagnostics Information Network Adapter Details about network adapter diagnosis Network adapter Wireless Network Connection driver information Description Atheros AR Wireless Network Adapter Manufacturer Atheros Communications Inc Provider Microsoft Version Inf File Name C Windows INF netathrx inf Inf File Date July- - PM Section Name ATHR DEV OS A B ndi Hardware ID pci ven c amp dev b amp subsys a b Instance Status Flags x a Device Manager Status Code IfType Physical Media Type Diagnostics Information Wireless Connectivity Details about wireless connectivity diagnosis Information for connection being diagnosed Interface GUID f ed -ab - d-ab c- fea b b f Interface name Atheros AR Wireless Network Adapter Interface type Native WiFi Connection incident diagnosed List of visible access point s item s total item s displayed Connection History Information for Auto Configuration ID List of visible networks item s total item s displayed List of preferred networks item s Diagnostic Information Wireless Connectivity Details about wireless connectivity diagnosis For complete information about this session see the wireless connectivity information event Helper Class Auto Configuration Initialize status Success Information for connection being diagnosed Interface GUID f ed -ab - d-ab c- fea b b f Interface name Atheros AR Wireless Network Adapter Interface type Native WiFi Result of diagnosis Problem found Root cause Wireless capability is turned off Detailed root cause Radio is off SW switch I THINK THE ISSUES HERE Repair option Turn on wireless capability Network Diagnostics Log File Name A - CE - A - E -F CE E CD Diagnose etl Other Networking Configuration and Logs File Name NetworkConfiguration cab I m not sure what the issue is my power setting shows that my adapter is set to maximum performance on both plugged-in and battery settings as well as the power management option showing that my computer is not allowed to turn off the adapter to save power So I m out of ideas and I can t find anything on google to help me out I appreciate any feedback on the issue Eric nbsp

A:Wireless capability keeps turning off

Check your windows settings and any software specific settings if there is a control panel other than the windows one for controlling the card. With my laptop the wifi always disconnects after a certain amount of time idle to save battery. Its not really uncommon.
 

http://www.techspot.com/community/topics/wireless-capability-keeps-turning-off.163578/
Relevancy 21.93%

Hi, as the title suggests I've got a bit of a sound problem:

I wish to record some of my digital sound (e.g. my friends in Skype) using Audacity and stereo mix. However, using the built-in stereo mix record feature Audacity has, no sound is being recorded. So I checked out the stereo mix device under 'recording devices' in 'Sound' and found that it was not detecting any sound at all.

I'm not totally sure as to how all it's settings must be, but it's like this now:

Listen to: enabled
Playback through: Speakers (Realtek HD Audio)

The device is set to be 'used' ofcourse.

Any help would be greatly appreciated...

Marty
 

A:No sound coming through 'stereo mix' device

Go to Edit -> Preferences and to the 'Audio I/O' or 'Devices' tab, and make sure the the audio INPUT is set to the source you want to hear from, in this case, the pc sound card or such, apparently Windows 7 does not change the input device when you select the Stereo Mix function for some reason.

If that's not the case, maybe your sound driver isn't allowing the stereo mix to work, you can try the Control Panel configuring method, which you can find at the audacity website (i can't set up links yet, but go to wiki.audacityteam.org/ and add this: index.php?title=Mixer_Toolbar_Issues#Using_the_Control_Panel) [sorry for this, but it's for a good reason, i'm not a bot/spam ]
kind of a pain to read through and configure everything, but will fix the issue.

If you don't want any trouble at all, you can just plug you speaker in the PC's 'Line In' plug (the blue one), and set Audacity's Input device to "Line in" or such.

Good luck.
 

http://www.techspot.com/community/topics/no-sound-coming-through-stereo-mix-device.173670/
Relevancy 24.94%

I just solved my own problem and thought others might benefit since I could not find the solution using internet search My Realtek HD Audio manager seemed to be creating an echo on my quot Line In quot HD Audio Realtek "line from effect) (if in" echo it Removing output sound not a is audio signal I had already set the environment and equalizer sound effects options to lt None gt but the echo persisted I found the problem seems that I was essentially duplicating the Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) Line In audio stream The first quot source quot I found was the HD Audio manager You can open the manager and view the Line In tab - mine had a non-zero playback volume the slider was NOT all the way to Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) the left for zero playback If you want Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) output from the HD Manager that makes sense I also found out a second Line In quot source quot It was in the Line In properties settings where I had checked off the option to quot Listen to this device quot When I disabled that the echo disappeared To view this Line In properties tab right-click on the speaker icon in the notification area then select Recording Devices yes quot Recording quot Then the tab will display in a window with the title Sound You should see the Line In device in the list Right-click on this item and select Properties The Line In properties window pops up Then select the Listen tab UNselect Listen to this device The echo should disappear if you re experiencing my problem I hope this helps someone I m just trying to help the community from which I ve received so much help grinthumb nbsp

A:Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect)

Two same signals

You're doing the right thing... getting rid of the other input signal.
 

http://www.techspot.com/community/topics/removing-line-in-echo-from-realtek-hd-audio-output-if-it-is-not-a-sound-effect.178881/
Relevancy 17.63%

I have an Aspire one NAV50 with Windows 7 starter.

One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.

I've tried the ff on my laptop:

restart
update
scan the laptop with MalwareBytes
Fn+f2
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
 

A:Laptop would work on ethernet cable not on Wireless Connections

I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
 

http://www.techspot.com/community/topics/laptop-would-work-on-ethernet-cable-not-on-wireless-connections.201158/
Relevancy 18.06%

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.
 

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 28.81%

I have previously on a different PC recorded the stereo mix in Audacity, whilst playing a CD and would get the full frequency range of the CD. On my current PC I now get a 20khz cut off, despite changing the settings (the sample rate and bit despth) on the playback and recording devices in Windows and also in Audacity. Does anyone know why this would be, and if there is any way of correcting it?
 

http://www.techspot.com/community/topics/realtek-windows-20khz-cut-off.216409/
Relevancy 21.93%

Hi All,
This is my first post here
So the issue I am facing is that I have a Dell Laptop with dual graphics card (Intel(R) 4400 integrated and AMD Radeon 8850m dedicated). The System would not detect any AMD driver installed on it. The device manager was showing only the Intel Graphics Card being installed .
Then I went on to uninstall the Catalyst Command Center from Control Panel, wherein I completely uninstalled the AMD Graphics driver and everything related to it.
Now, AMD is not at all being recognized by my system. Device manager doesnt show it even in hidden devices, DriverEasy scan doesnt read it, Even Dell System detect is failing to detect the AMD graphics Card.

How do I proceed ahead with this issue.

Have I somehow unmounted the hardware internally?
Is there anyway besides a factory reset to get this working again ( I have concerns with a factory reset also not helping me )
What system scan tools can I use to get my laptop to recognize the Device again?
Please Help
Thanks In Advance
 

A:AMD Radeon 8850m device is missing

Have you tried going to Dell support site and down loading the orginal drivers and software for your graphics.
 

http://www.techspot.com/community/topics/amd-radeon-8850m-device-is-missing.215797/
Relevancy 17.63%

Razer on Tuesday unveiled what it's calling the world's most advanced gaming mouse. Now in its third iteration, the 2015 Razer Mamba features a brand new 5G laser sensor and Adjustable Click Force Technology, among other features.

Read more
 

A:Razer's new Mamba features 16,000 DPI laser sensor in wired and wireless configurations

I'll pass. I don't game on anything that low. :\
Does anyone even go outside the 800-2000dpi range? I keep my mouse at 2000dpi.
 

http://www.techspot.com/community/topics/razers-new-mamba-features-16-000-dpi-laser-sensor-in-wired-and-wireless-configurations.214881/
Relevancy 21.07%

I was updating my graphics card drivers for my graphic card PNY GEFORCE GTX 660 and went to device manager, I used ?automatically search for new driver? and a dialog box appeared "Windows has determined that the driver is up to date".
Yet, I went to Nvidia website and did a driver update. I checked again Device manager for my display adapter and the new driver was TWO MONTHS NEWER.
I wonder why that happens.
 

http://www.techspot.com/community/topics/why-is-device-manager-lying-to-me-about-the-last-driver-version-for-my-graphics-card.215610/
Relevancy 17.63%

So I have 2 images from the Device manager.
The driver has a Yellow caution sign with "!" inside it.



My issues:
Cannot Connect to wireless, But can connect via Ethernet Cable.

My troubleshooter said the drive couldn't start, and that I needed a Wireless Cable to plugin to the computer.

This is my school computer, my help desk helped before but they are out of office because its summer break.

Device Manager > Components > Problem Devices
Atheros AR5B97 Wireless Network Adapter PCI\VEN_168C&DEV_002E&SUBSYS_E034105B&REV_01\4&124A40C8&0&00E1 This device cannot start.
Also 2 things.
I tried disabling my Bluetooth High Speed, it did nothing.
I do not know if this is the right thread, because this is my first post, if there is anymore information you need to know please contact me.
 

A:Atheros AR5B97 driver not letting me connect to wireless

Hi and welcome to the boards.

How old is this system? Sometimes the wireless card will fail and a new one can be installed.

However, you can upload and install the latest wireless network driver for your system via ethernet cable. Sometimes that is all you need. If it is a built system like a Dell then go to the manufacture's website if this was a system that was built by yourself or someone else then go to the motherboard's website.

Please keep us updated.
 

http://www.techspot.com/community/topics/atheros-ar5b97-driver-not-letting-me-connect-to-wireless.215528/
Relevancy 21.93%

I have one problem with my PC sound on board,
My pc is windows 7 ultimate 32bit, Intel Desktop Board E210882,
The driver is already install but the icon of sound still red cross like image attach file, I already plug in the headset, any one please help me?

thank, seahong heng
 

A:No audio output device is installed

Well, one way or another, your computer isn't using the device, so have you checked to see if it's disabled in any way? right click the speaker and go to playback devices, it'll come up with a list of your sound devices, make sure the one you're trying to use isn't disabled (right click to change that) if you're unsure which is yours, just enable them all lemme know if that helps at all
 

http://www.techspot.com/community/topics/no-audio-output-device-is-installed.188878/
Relevancy 18.06%

Many manufacturers have developed a touch-first approach to input devices, spurred by the rapidly evolving mobile revolution. Such methods work great on select devices but when it comes time to do some serious work, nothing has yet replaced the trusty...

Read more
 

A:Logitech's new MX Master Wireless Mouse said to be its best yet

Too bad they don't mention a left handed version.
 

http://www.techspot.com/community/topics/logitechs-new-mx-master-wireless-mouse-said-to-be-its-best-yet.210722/
Relevancy 24.51%

Recently my Gbps has taken a serious nosedive I was around Gbps then it dropped dl Adapter 0.84Gbps Network The other computers on the network are getting Network Adapter 0.84Gbps dl great speeds it s just my computer My computer is running fine It s just the connection speeds This isn t just happening on WI-fi it s also happening when I plug in the Ethernet cord My network adapters are Broadcom n Network Adapter Microsoft Kernel Debug Network Adapter Qualcomm Atheros AR PC-E Gigabit Ethernet Controller NDIS They are all up to date And I use Avast internet security Also I ve cleaned the cache in both firefox and chrome browsers I ve also removed all but add block add-ons I m using AARIS modum router through time warner cable And again the Network Adapter 0.84Gbps dl other computers are getting great speeds always up of Gbps I even checked my Mom brand new computer which is getting upwards of Gbps I ve called TWC they sent someone the wires were a bit loose and it fixed everyone s laptop but mine Please help I m clueless here Here is the Broadcom n Network Adapter settings - auto mhz - Disabled n Preamble - Auto Antenna Diversity - Auto AP Compatibility Mode - Higher performance Bandwidth capability - b g MHz Bluetooth Collaboration - Auto BSS PLCP Header - Auto Short Long BT-AMP - Enabled Disable Uon Wired Connect - Disabled Fragmentation Threshold - IBSS g tm Protection Mode - Auto IBSS Mode - b Only Locally Administered MAC Adress - not present Minimum Power Consumption - Enabled Mixed Cell Support - Disabled Power Output - Priority amp VLAN - Prioroity amp Vlan Disabled Rate - Best Rate Roam Tendency - Auto Roaming Decision - Auto RTS Threshold - Shorti GI - Auto WMM - Enabled WZC IBSS Chaneel Number - MHz XPress TM Technology - Disabled nbsp

A:Network Adapter 0.84Gbps dl

Also I recently installed windows 8. I've tried all sorts of things to get it to work. Still no luck.
 

http://www.techspot.com/community/topics/network-adapter-0-84gbps-dl.210602/
Relevancy 18.49%

My current wireless router, a 10-year-old Linksys (Wirless-G 2.4 Ghz 54Mbps), is past it and I'm on the lookout for a replacement. I am in the UK.

There are several devices that connect to it:

Nokia Lumia 520
Motorola Moto G
Now TV box
Sony Vaio laptop with Atheros AR9485WB-EG wireless network adapter
Dell Vostro 3750 laptop with Intel Centrino Wireless-N 1030
IPad Mini 2 with Retina display

My ISP is Virgin Media and my current wireless router is connected to it's "Hub" (http://store.virginmedia.com/discover/broadband/explore/our-fastest-wireless.html)

As far as my home goes, the furthest any device is ever from the wireless router is about 10-12 metres. That involves passing through a one ceiling and a couple of walls. I've no idea about the materials used in the construction of the house.

I would be very grateful if someone could recommend a good replacement wireless router.
 

A:Wireless router recommendations

Look for a MIMO (multiple in/out rf) they have at least two antennas and maybe three. These are more powerful and should do the job.

Also consider an EoP device (Ethernet over Power) which uses your house wiring as a transport so you can
get a switch at the far-end to connect

Here's mine:
Code:

primary router --- wired devices
|
+---- wired to EoP(master) . . . . house wiring . . . EoP(slave) --- switch or access point

If you're careful with the setup, everything will be on the same subnet and print/file sharing is viable.
 

http://www.techspot.com/community/topics/wireless-router-recommendations.210032/
Relevancy 24.94%

Have a nice pair of Bluetooth headphones and trying to get them hooked up to the sound of my older TV. Is there some kind of adapter you can buy to to hook up to the audio out of the TV so I can connect the 2 via Bluetooth? I just don't wanna pay for another pair of headphones. I just want the reciever.
 

http://www.techspot.com/community/topics/bluetooth-adapter.210034/
Relevancy 21.93%

Hi, Could anyone tell me any ideas on trying to get my usb device to work again. Not recognizing on my computer. Went into device managers and can see unknown device. I have tried uninstalled it and pluged it back in but all it says is successful installed unknown device. The computer doesnt even know what it is. Is it possible to try and install a driver for it and tell it that its a usb device?

Thank you
Mitch
 

A:Sandisk Cruzer unknown device

Sometimes the drives just die. This shouldn't be a driver issue, do other flash drives work in the computer? Have you tried this drive in a different computer?

You could open up disk management and see if you can delete the partition and create a new one, or simply format the existing one as NTFS or exfat. WARNING: Doing this will cause you to lose any data you may have on the drive.
 

http://www.techspot.com/community/topics/sandisk-cruzer-unknown-device.209278/
Relevancy 18.49%

ALL I did was replace the almost dead batteries & now its a pita to click on something.
Its like the cursor is on ice, I move it up to click on a bookmark & it slides on by & I have to s l o w l y move it into the area.Its a wireless Microsoft mouse.
 

A:Odd wireless mouse behavior

Open Mouse by clicking the Start button , clicking Control Panel, clicking Hardware, and then clicking Mouse.
Click the Pointer Options tab, and then do any of the following: To change the speed at which the mouse pointer moves, move the Select a pointer speed slider towards Slow or Fast.
 

http://www.techspot.com/community/topics/odd-wireless-mouse-behavior.208493/
Relevancy 27.52%

Hey, I'm a new member here with a problem!

I have a pair of Skullcandy Crushers with an arguably great built-in mic that turn on with a press of a button. However I built a new computer a few days ago and installed the latest version of the ASUS Realtek HD Audio manager, and while the audio on the headphones work, the mic refuses to work and isn't even recognized on programs like Skype and Hangouts.

I have tried the front two ports and tinkered with the settings and nothing has worked as of now, please help ASAP!

-Extabyte
 

A:Skullcandy Crusher mic not working with ASUS Realtek HD Audio Manager

Yeah thats because Skullcandys aren't really built for computers, just iPhone & Android. I had the same issue with my Skullcandy headphones and decided to buy a legit for PC headset. Sorry you spent your money on them!
 

http://www.techspot.com/community/topics/skullcandy-crusher-mic-not-working-with-asus-realtek-hd-audio-manager.204154/
Relevancy 18.49%

I am using an AT&T supplied 2wire homeportal 3801 hgv gateway for telephone and wireless functions. The Linksys RE1000 wireless-n range extender does not provide the range needed. Can a Linksys N900 or E3000 wireless N router be used as a repeater? If so, how are the gateway and router to be configured?
 

A:Using a wireless router as a repeater

Code:

modem ==>primary router (wifi on chnl 1)
|
(a lan slot)
|
+-----wired connection --(a lan slot) secondary router (wifi on chnl 11)

the secondary wan slot is left empty

* use the same SSID and password on both for simplicity
* config the secondary to NO use DHCP - - this forces the primary to do all assignments

full print/file share is functional in this setup ( I use it myself).
 

http://www.techspot.com/community/topics/using-a-wireless-router-as-a-repeater.208124/
Relevancy 21.07%

I've a External HDD( Western Digital company-500GB) which was working properly last night but today it's not working. when I connect the EXt. HDD to my laptop usb port then it's got power but not shows in my computer.
when I go to device management it shows a window (you need to initialize before logical disk management can access it.) but when I go to initialize the HDD then show it "the media write protected". I cann't initialize the HDD and cann't access the HDD.

Someone help me to recover my old DATA from this Ext. HDD.

Thanks for advance.
 

A:External HDD not recognize my laptop & cann't initialize it from Device manegment

Hello Rajib Sarker,
The first important thing to note here is that if you initialize your HDD you will lose all the information that was stored on it. Sometimes portable external HDDs can behave like that if they are not getting enough power. It would be a good idea to try and connect your HDD using a different USB cable, preferably a short one. Another thing you can try is connecting your HDD to different USB ports and to a different computer. You can also run WD DLG diagnostics tool to test the HDD http://products.wdc.com/support/kb.ashx?id=GTBpZQ .
Hope that helps.
 

http://www.techspot.com/community/topics/external-hdd-not-recognize-my-laptop-cannt-initialize-it-from-device-manegment.207752/
Relevancy 18.49%

I've upgraded to fiber abonement 35/35mb and my integrated network card can't take that much so I have to upgraded that part too and I was thinking about Linksys AE3000 Dual-Band usb adapter, as my budget is pretty tight right now.

Does anyone have any experience on how gaming will be wireless or if that is a decent card ??
 

http://www.techspot.com/community/topics/wireless-gaming.207463/
Relevancy 28.81%

I just got a new computer...with Realtek HD Audio. Specifically: Realtek ALC888S.

The computer has no bass. Music played through YouTube, Winamp, WMP, iTunes, or through games have essentially nothing coming out of the sub.

I do have 5.1 selected, that is what my setup is.

Here is the weird thing. When I plug my MP3 Player into the Line-In and play through there, the bass sounds great. When I play from inside the computer, there is none. Can anyone point me to some places to look inside the Realtek HD Audio Manager? I can't seem to find anything useful in there at all.
 

A:Realtek HD audio, no bass

have you checked the bass management and swap bass and center option? you might want to try checking those option to check if it bring back the bass.

btw also try the 5.1 speaker test to check if all channels sound properly.
 

http://www.techspot.com/community/topics/realtek-hd-audio-no-bass.166680/
Relevancy 21.93%

My Asus DRW 24B1ST CD/DVD-Rom device works in Dos (bootCD works no problems), and is recognized by my WinXP Device Manager and listed as working properly. But when I try to run or view a disk from My Computer, all I get is a blank window. The window has the correct partition/drive identity, so I know it's pointing to the device, but it just won't interact with the disk.

The same device was working fine in a previous WinXP installation on the same computer, but when I installed another WinXP sp2 (I had lost access to the original installation) I had a few glitches and this is the remaining one that needs to be fixed.

BTW, I can bootup from a bootCD and run a miniXP and have no problem with the CD/DVD-ROM device, so the issue must be with the current WinXP installation.

Any suggestions for repairing this problem?
 

A:CD-ROM device won't open or run disk

Wow very interesting. Yo had mentioned it will boot to disc, have you tried while in safe mode. So if you restart computer and utilize the function f8 button go to safe mode with networking check to see if it works in there. If it does then I assume it is driver related issue. Of course in safe mode it loads minimum drivers to have a functioning safe environment. Even though windows recognizes it in device manager does not mean it has a working driver. I would even go as far as uninstalling the driver and reinstalling one from the manufactures website. You could first try uninstalling the driver then rebooting the computer then letting windows reinstalling the driver upon boot up to see if that fixes it first. Hope this helps let me know what you find.
 

http://www.techspot.com/community/topics/cd-rom-device-wont-open-or-run-disk.206972/
Relevancy 27.09%

I m trying to configure Surround Sound but Realtek doesn t seem to be installing and it s configuring speakers driver 5.1 Realtek Trouble Sound; issues Surround to driving me nuts I have installed the driver provided by Gigabyte for my motherboard Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues and it s not doing anything It installs asks me to restart the PC but nothing is Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues there OS is Windows -bit Gigabyte says that my motherboard supports both and Surround Sound so I don t understand why I can t configure my speakers to run it only lets me use Stereo Device manager only shows High Definition Audio Device and Control Panel doesn t show Realtek at all Realtek Audio Manager doesn t appear either it s not in the system tray icons where I would usually find it Even searching for Realtek brings up nothing other than all the drivers I have downloaded to see if they would work Link to motherboard s Realtek driver as provided by Gigabyte http www gigabyte com products product-page aspx pid dl Link to motherboard s specification http www gigabyte com products product-page aspx pid sp Image showing my device manager gt sound http gyazo com ad b bd e ae a Any ideas as to what the problem is I can t seem to find anything audio related in BIOS either nbsp

http://www.techspot.com/community/topics/trouble-configuring-speakers-to-5-1-surround-sound-realtek-driver-issues.206888/
Relevancy 18.49%

My wireless is not working on my computer, just a couple months ago I reset my computer using the ISO file, now my computer will only connect to the Ethernet cable. The wireless switch is on. I see a button near the VAIO button that shows a computer with signals coming off of it, I've tried pressing it but it doesn't do anything. Computer specs: VAIO Song Laptop with 6 GB Ram and 1 TB HDD.
 

A:Wireless network not working

Sounds like when you reset your computer the proper wireless drivers were not re-installed. I would start looking for a solution for this. What Operating System does it have (Windows 7 / Windows 8.1/ etc.)? Have you tried to remove the Wireless drivers and re-install those? How about downloading and installing updated drivers from the VAIO website?
 

http://www.techspot.com/community/topics/wireless-network-not-working.206511/
Relevancy 18.49%

Hi. This is my first post on this forum.

I would like to ask some help regarding a problem with my internet connection. Connecting our separate PC and my Laptop to my LAN works perfectly fine but when I use our wireless network to connect my laptop and phone, that's when the problem occurs. I tried rebooting the router (unplugging the power switch, cables and such). And I also tried rebooting my phone and laptop but nothing works. I also tried looking at the router settings and tried changing the security settings to none to see if I can connect but still cant.
I just don't know what the problem is. Can you help me?
Thank you.
 

A:Can connect to LAN but not on wireless network

Hey strings12. A bit more info on your equipment would be helpful.
1) What is the OS (Operating System) and Service Pack Level of your laptop, SP1,2,3 ?. rIght click on My Computer icon and select Properties
2) Are we talking about one laptop here?
3)Is your router secured and what encryption method are you using, WEP,WPA or WPA2
 

http://www.techspot.com/community/topics/can-connect-to-lan-but-not-on-wireless-network.198872/
Relevancy 18.49%

So I got this new Compaq Presario CQ57 with some upgraded graphics, upgraded processor, all that good stuff, but every time I try to do something or go online, after a while it just stops being connected. The Network and Sharing center says that I'm connected, and I haven't accidentally hit the button to turn Wi-Fi off, but it's seemingly at random and I don't know what to do. Any thoughts?
 

A:Wireless Laptop Sucks

What website? Try news.goolge.com and browse about there for awhile.
 

http://www.techspot.com/community/topics/wireless-laptop-sucks.203931/
Relevancy 18.06%

Hello all,

I use an ADSL for Internet. The modem is wiry (not wireless). I plug the Ethernet cable from that modem into my laptop for accessing Internet. Everything until now is OK. But I want use the Internet on my cell phone as well. For it I need to use the wifi card of the laptop, this time, as a sender, for wifi Internet accessing for the cell phone!

1- Is it possible?
2- If yes, How to configure that card please?

Thanks.
 

A:Using laptop as a wireless modem for wifi uses

What kind of phone do you have? If you have wifi, I don't understand why you can't go into the wifi setting on your phone, find wifi & amongst other possible networks should be yours.
Or just get the manual for it , online if need be & go for it. Good luck.
 

http://www.techspot.com/community/topics/using-laptop-as-a-wireless-modem-for-wifi-uses.206334/
Relevancy 21.07%

Hi,

I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )

I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.

My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . : 172.22.155.137
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 172.22.155.138
And when I try to do nslookup:
C:\Windows\system32>nslookup
Default Server: google-public-dns-a.google.com
Address: 8.8.8.8

The default server shouldn't be that thing. please help. Nor the address

Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
 

http://www.techspot.com/community/topics/your-computer-seems-to-be-correctly-configured-but-the-device-or-resource-dns-server-not-respondin.206332/
Relevancy 18.06%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 23.65%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 18.06%

Hello:

I know there are a million of these posts however, I couldn't find my specific problem. I have an Xbox 360 wireless controller connected to my PC. Normally the light indicating 1 is light. This lasts for about 5 seconds. Then the light for controller 4 lights at the same time and then 2 and 3 and then 1 and 4 and so on (this happens very quickly). During all this time the controller works fine. Except that every once in a while it disconnects (no lights). Pressing the xbox button inmediately connects it again but is very annoying.

Any help what might be the issue? Also, it worked fine before. Ive just stopped using it for a while and when I went to use again, the problem started.

Thanks for any help.
 

http://www.techspot.com/community/topics/xbox-360-wireless-controller-disconnects-from-pc.204770/
Relevancy 18.06%

Hello I own a Windows PC LG Optimus X Sony Xperia U Samsung Galaxy Tab Xiaomi MI All of these are connected to my Router via WiFi and they work like a charm I recently purchased G-Box Does WGR614 Not Wireless-N Allow MX2 Router Netgear G-Box 150 Midnight Midnight MX All The Way From US - India THE PROBLEM Does Not Connect Over WiFi But Works Perfectly Over Ethernet Cable The device currently connected to my TV and I am using an Ethernet Cable connected to my Router recognizes my router name But when I enter the password it says connecting for - seconds and nothing happens When the Ethernet Cable was already connected and when I tried to connect via WiFi the device prompted a message that it cannot connect to the Router via Cable and WiFi at the same time So I ve tried all the Netgear WGR614 Wireless-N 150 Router Does Not Allow G-Box Midnight MX2 ways possible by removing the Ethernet Cable What I ve Done MAC Address Already Added To Router s Attached Devices Disconnected Switched Off A Hundred Times Tried All Security Options On Router None WPS Security Key Blah Blah Blah Also Installed WiFi Fixer using Ethernet I don t know what s happening but I could see something Connecting Disconnecting Connecting Disconnecting FYI I Earlier Tried To Connect A Netgear WGR614 Wireless-N 150 Router Does Not Allow G-Box Midnight MX2 Dell Laptop and it showed Limited No Connectivity The Laptop was at my place only for a day so we managed by Ethernet and never bothered when it did not connect over WiFi The same problem occurred when I tried to make my PC Wireless by using a WiFi Adapter I tried tried tried but Netgear WGR614 Wireless-N 150 Router Does Not Allow G-Box Midnight MX2 ignored as it was not a requirement But Now I m Helpless I Need This Device To Connect via WiFi Please Help nbsp

http://www.techspot.com/community/topics/netgear-wgr614-wireless-n-150-router-does-not-allow-g-box-midnight-mx2.204470/
Relevancy 18.06%

Hi , my wifi dosent open facebook or browser but it can open watsapp , viber ..... etc and when I connect my pc to it torrent work fine and download but dosent open any page on browser so please help
 

A:Problem with tp-link N wireless router

Are you sure FB isn't blocked in Egypt (I see that you are from there via your profile)? That could be the issue.
 

http://www.techspot.com/community/topics/problem-with-tp-link-n-wireless-router.204205/
Relevancy 22.36%

"No Audio Device" is the message I get when I try to adjust the volume from my "Start" button. I have an old Dell-Optiplex270 running Windows XP with an external speaker unit. I have "RealTech Audio Device" and VLC" Media Player. I read where I need to download "SoundMAX". Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
 

http://www.techspot.com/community/topics/no-audio-device.204166/
Relevancy 21.5%

I have headphones through onboard audio set as the default playback device.

I have HDMI set to listen stereo mix (onboard) under recording devices so that I can get duplicate audio on my headphones and TV.

Windows 7 likes to set as HMDI audio as the default playback device when I am not looking (assumedly shortly after rebooting, but not quite sure when). And then I get no sound from my headphones because the programs are all playing on HDMI.

Is there way I can fix this?
 

A:HDMI hijacks default playback device

Hmm; I think HDMI is mutually exclusive to pc { speakers & headphones }. If the HDMI senses a signal to the tv, then the others go off.

right-click on the speaker icon in the tray and view/set the playback devices
 

http://www.techspot.com/community/topics/hdmi-hijacks-default-playback-device.204095/
Relevancy 18.06%

Okay next Monday (July 21st) I go in for a hernia operation, I am going to be laid up for awhile and thankfully I have a laptop I can use while recovering upstairs in my bedroom. I can access my Netgear router but the signal is not that strong (bedroom and downstairs office are on opposite corners).

So I have been pondering getting either an Access Point or a Extender for the upstairs but there are so many to choose from I am not sure what to choose nor what brand because the reviews are strongly mixed regardless of who the manufacturer is.

My Needs:
1. Both 2.4 GHz and 5.0 GHz. I've looked at this one but I am not sure: http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846

2. Something simple to set-up.

3. It must work with WPA security. The above one I linked to, after firther research does not do well with WPA.
 

A:Access Point or Extender for Upstairs Wireless?

Really NEED 5ghz? dual band systems seem to impact the reliability AND the distance reached.
You could lock it down to use only 2.4Ghz and improve the reliability.

I solved my distance issue using an EoP device and then any WiFi router at the remote end.
That's TWO purchases; The EoP master/slave pair to get wired access into the remote location and then the WiFi router itself. I've always been partial to Netgear and bought their EoP.
 

http://www.techspot.com/community/topics/access-point-or-extender-for-upstairs-wireless.203893/
Relevancy 18.06%

I have a Windows 8.1 Laptop and yesterday it said I had no connections.
My computer is wireless but then it went to Ethernet it didn't let me connect to anything either.
I tried looking things up to see how to fix it but it just kept talking about buying cables.

Anyone know whats wrong?
 

A:How to fix Windows Laptop When it goes from wireless to ethernet

You may try to disable your Ethernet adapter (wired connection) while you're connected via a wireless connection through your wireless adapter.
 

http://www.techspot.com/community/topics/how-to-fix-windows-laptop-when-it-goes-from-wireless-to-ethernet.203484/
Relevancy 24.08%

I have a HP 650 notebook that is in ok condition with Windows 8 OS. It uses a Ralink 3290 wireless adapter for my wi-fi needs. For the past three months, my adapter has been vanishing! I look at the indicator in my bar, and it shows no device available. I open up the Network and sharing Center and select the change adapter settings, and the only thing showing is an ethernet connection that I don't use. I can sometimes get the adapter to return by using the find and fix devices option on the search menu, but sometimes even that doesn't work. I've even been getting the "This device cannot find enough free resources (code 12)" message for the Ralink PCIe from the troubleshooter. while I did see an article on this elsewhere, I had some trouble understanding it. Can anyone help me figure out why this is happening to my laptop? Thanks for any help you can provide.
 

A:Vanishing Network adapter and resuorce problem

You might need to update and install the laptops chipset drivers. And also try to update the driver for your wireless adapter from the manufactures site or from the HP support page.
 

http://www.techspot.com/community/topics/vanishing-network-adapter-and-resuorce-problem.203293/
Relevancy 21.5%

Hello,

I have a problem when I turn on my laptop I get a no bootable device, hit any key prompt. There are no options in the boot manager. I am able to get into the BIOS by pressing the f2 key I think but I really have no idea what to do from there. Any help would be greatly appreciated,

thanks
 

A:Packard Bell Easynote TE No bootable device

Sounds as though your hard drive has went bad.. Once you get into bios see if it is reporting your hard drive. If not the its rather safe to say . Your hard drive is bad.
 

http://www.techspot.com/community/topics/packard-bell-easynote-te-no-bootable-device.203273/
Relevancy 18.06%

I created a wireless coverage map using a device.
Does my coverage map apply just for that device or does that coverage apply to other devices?

I want to improve wireless coverage both indoors and outdoors.
What is the best way to do that?
Do I need a device for both indoors and outdoors to improve the signal strength?

Money is not an issue. I want the best solution.
Thank you!
 

A:How Can I Amplify Wireless Coverage Indoors and Outdoors?

WiFi range is limited by two primary factors

Frequency (lower travels further)

RF power output
Max range is therefore achieved by staying in the 2.4ghz band and not allowing the newer 5ghz AND using a wifi router with good RF output. It seems to follow that the higher the RF output, the shorter the life of the router.

The MIMO (multiple-in, multiple-out) class routers (ie has more than one antenna)
will deliver the best.

There are Range Extenders which are just 'repeaters' and boost the RF from that specific location.

If you daisy chain a primary, one secondary and add a range extender, I suggest using the same SSID for each, but unique RF channels to reduce interference.
{eg primary on 1, secondary on 6, extender on 11}

NOW the $64 question: What's the need for range over open ground?
 

http://www.techspot.com/community/topics/how-can-i-amplify-wireless-coverage-indoors-and-outdoors.203304/
Relevancy 18.06%

Hi, not great with computers and had a look around at various forums and can't find a solution to my problem.

Essentially, whilst I can view the wireless network connections available, I cannot connect to the wireless connection I want to although all other computers at home can connect.

I think the issue is that I have no IP address on this computer (using Windows XP that has just been reinstalled). The result of ipconfig/release is:
No operation can be performed on Wireless Network Connection 2 while it has its media disconnected.

Sorry if further information is required, will provide whatever is needed. Thanks for any help!
 

A:Wireless Connection Media Disconnected (Windows XP)

First disconnect any wired connection and THEN attempt the wifi.
Something called DHCP is responsible to give the PC an IP address and also the DNS addresses (regardless of wired or wireless).
 

http://www.techspot.com/community/topics/wireless-connection-media-disconnected-windows-xp.203103/
Relevancy 18.06%

My living arrangement has it so that my computer is about 25 yards away from the router. I have high speed internet, and if I'm on a laptop right next to the router, I can easily get 30 mb/s. But when I'm at my computer which is 25 yards away, I get speeds of about 8 mb/s or less (often 1 - 2 mb/s).

The router and wireless adapter that I have both seem to be top tier, but I'm not sure:
http://amzn.to/1pcUvtF
http://amzn.to/1oiLkbI

My question is, are there any *significantly* better options than the ones I just linked, as far as signal distance? Or is the current technology in routers and wireless adapters limited?
 

A:The max range of wireless routers and adapters

To directly answer your question: No.

What should help you out: Drop it to 2.4Ghz rather than 5. That will get you increased range, and through that at a fixed range - faster speeds. You'll lose the ability to run 802.11ac and have to fall back to 802.11n, but you'll be happier since you weren't getting ac speeds anyway.
 

http://www.techspot.com/community/topics/the-max-range-of-wireless-routers-and-adapters.203058/
Relevancy 18.49%

You can see several wireless charging transmitters with QI standard in the market now, QI standard is released by Wireless Power Consortium. The advantage of wireless charger is quick-acting charging, you just need to put your phone on it, and then the phone will get full of power through the magnetic induction. A superior and rapid charging experience without any wires, it is ideal for travelling. However, the wireless charging technology isn?t stable enough now, the speed of it is slower than wired charging. Another problem is heat problem, and it directly leads to the slower charging speed, so what is your comment on wireless charger?
 

A:Wireless charger

Wireless charging will never be as efficient as a direct connection. And with that said it counters the concept of going green. It is as ridiculous as having 4K resolution on a tablet. People want it because it is new and nobody else has it. Like 4K, wireless charging can be useful but not as a replacement for everything.
 

http://www.techspot.com/community/topics/wireless-charger.202857/
Relevancy 15.91%

Hi all

I have got a new desktop PC, which works fine with Ethernet but I am not able to connect through wireless.When I tried to connect to the broadband, it says error connecting to the Broadband connection
Error 651: The modem (or other connecting device) has reported error. However, same comnnection works very well with my vista home premium Dell Laptop.

Thanks in advance
Pxray
 

A:HP Pavillion PC with windows 8 works ethernet works well but not able to connect through wireless

How to reset TCP/IP by using the NetShell utility
 

http://www.techspot.com/community/topics/hp-pavillion-pc-with-windows-8-works-ethernet-works-well-but-not-able-to-connect-through-wireless.202705/
Relevancy 24.94%

My laptop had headphones plugged in because I was watching a film but while I was in another room my laptop was knocked onto the floor around - ft drop change mic to a HD audio headphones Realtek port? port a manager, landing on the headphones jack the wire is fine but the ports completely broken I can see cracks and its loose and everything The laptop has Realtek HD audio manager and in my experience of this program on other desktops I ve had I was able to change Realtek HD audio manager, change a mic port to a headphones port? what port does what My laptop only has a headphones port and Realtek HD audio manager, change a mic port to a headphones port? a mic port and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic however in Realteks audio manager I can t find out how to do this In pictures I ve seen on the internet there is a quot Device Advanced Settings quot button as seen in this picture http www vistax com attachments ealtek-hd-audio-driver-version-hd manager jpg but my program doesn t have this Do I need to download a newer version of the software or is it just not possible to change my mic port to be my headphone port I dont mind if I have to use third party software I just want it to tide me over till I can get it sent away Thanks for suggestions greatly appretiated nbsp

A:Realtek HD audio manager, change a mic port to a headphones port?

I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.

Your best bet is to get the damaged port repaired.
 

http://www.techspot.com/community/topics/realtek-hd-audio-manager-change-a-mic-port-to-a-headphones-port.166497/
Relevancy 18.49%

I have a D-Link DSL-2741B router, Internet via LAN cable is working normally but over wereless me the real problem can not be conect.Try I have a laptop and a mobile phone. I reset the router and re-configured, but still can not connect to wereless.Of laptp I did a new system of Windows 8, installed new drivers, I've tried but will.Problems originated from before 2-3 days. Please help if someone has a solution. thank you

PS: Ive literally tried everything including uninstalling/reinstalling network card, restore points (there are none), a windows update download, and reformatting the hard drive (wont let me). Any help is appreciated.
 

A:I can not connect to wireless

Look at the device manager (CP->Computer Mgmt->device mgr) and expand [+] Network adapters. If there are yellow or red marks, then the driver is at fault.

If not, then it's the settings of one of these:

the adapter
the firewall
the router

 

http://www.techspot.com/community/topics/i-can-not-connect-to-wireless.202161/
Relevancy 21.93%

I just bought a

Amd A6 6400k apu

ecs a55f2-m4 motherboard

kingston hyperx 4gb 1600 ram

and I installed all drivers but even when I try to open solitaire it says no suitable graphics device found.
 

A:No suitable graphics device found

Which graphics driver and version did you install?

AMD Catalyst 14.4

32-bit Catalyst Software Suite
64-bit Catalyst Software Suite

 

http://www.techspot.com/community/topics/no-suitable-graphics-device-found.202170/
Relevancy 18.49%

Hi gang. My usb modem HAS to be unplugged then plugged in for it to work?
Even if PC is off when I do this it will automatically start/connect when windows(7) loads and will work normally. If I don't do this I can not get it to work?
'device mngr' shows it as an 'unknown device'?
I have reinstalled it to no avail.
 

A:USB wireless issue

Are you talking about a modem or a usb network adapter?
 

http://www.techspot.com/community/topics/usb-wireless-issue.201928/
Relevancy 18.49%

Not sure if this is the correct section to post this question.
I have a desktop PC which is using 'Clear Wireless' as my internet connection.
If I set up another desktop PC in another room.....how do I get it to also use the same wireless connection?
This might sound like a silly question, but when you get my age, your lucky if you can remember what day it is.
 

A:Wireless connection?

"Clear Wireless" appears to be a service of Sprint. and also WiMAX
meaning you don't have a Modem or Router but take your connection directly off the radio waves - - can you confirm?
 

http://www.techspot.com/community/topics/wireless-connection.201898/
Relevancy 17.63%

Hello everyone,

I'm having an issue connecting to my wireless network with my computer. Things were working fine until a few weeks ago when the wifi on my computer stopped connecting; now I can only get internet through a wired connection (although the fact I can do this is strange to me). My rooommate is not having any issues with the wireless whatsoever. I have a fairly new acer aspire s7 which has no difficulties connecting to any other wireless network while I am at campus or have gone home for the weekend. I'm at a loss as to how to fix this issue as it has become impossible to do any form of research while I am at home. Any help would be greatly appreciated.

-Jay
 

A:Laptop issue connecting to wireless internet but connects w/ LAN

Posibilities are your wireless signal is not in range or the wireless router is full of user who are connected to it, or it surpasses the user's limit.. how many user's has wifi connected to the wireless router?
 

http://www.techspot.com/community/topics/laptop-issue-connecting-to-wireless-internet-but-connects-w-lan.201675/
Relevancy 18.06%

Small office - 3 computers, 2 plugged into router, 1 wireless. Can I have two networks, one for office use, another for customers, that way they can't see our data files?
 

A:Have Linksys Wireless-N router, can I have two networks?

I'll look into that at office AM. Thanks!
 

http://www.techspot.com/community/topics/have-linksys-wireless-n-router-can-i-have-two-networks.201605/
Relevancy 19.35%

Yesterday, I started a download and kept the pc on with my Seagate FreeAgent GoFlex External HDD 1TB plugged in. After I woke up I realized that there was a power cut and the computer went off unexpectadly (I had no UPS or any backup system).And, I found that my Ext HDD was not seen in my computer anymore (It was working perfectly until before I went to bed).
In device manager, under 'Disks' it shows 'GoFlex Hard Disk', but in BIOS or Disk Manager there is no sign of this HDD.

I really need the data in the HDD badly. Please help me recover it.
P.S. I read somewhere that keeping the HDD in freezer might help and give a little more time. Is that true? Worth the risk?
 

A:External HDD gets detected in Device Manager but not Disk Manager or seen in 'My Computer'

Power outage probably killed something in the enclosure or its PSU. The drive in the enclosure is probably fine. I would remove the drive from the enclosure and put it in a dock or install it in a desktop computer before considering freezing it. Freezing is usually reserved for click of death drives, and a last ditch effort.
 

http://www.techspot.com/community/topics/external-hdd-gets-detected-in-device-manager-but-not-disk-manager-or-seen-in-my-computer.201343/
Relevancy 21.5%

I have two WD 3tb external drives. They both work but only one at a time. I am running Windows 7. I have renamed both drives but still no go. I have previously have had a 2tb and one the 3tb drives running at the same time with no problem. I had to upgrade to the 3tb from the 2tb because of the size of my projects I am working on. Does anyone have a solution?
 

http://www.techspot.com/community/topics/computer-not-recognizing-2nd-of-the-same-wd-mass-storage-device.201294/
Relevancy 21.5%

My partner's laptop HP 0700 Notebook will not boot up and just comes up with the above message. We found an HP troubleshooting site which said to reset the BIOS default settings by pressing the Escp key, F10 followed by F9 to reset. Then it said to press the F2 System Diagnostics keys which tested the hard disk and all the tests came out OK. When we tried to restart it, it came up with the same message and we have noticed that before it comes up with this message it says in the bottom left-hand corner "Prepare boot to OS" and then comes up with the message in the heading. We have not bootable disk as the laptop already had everything installed.

Coupled with this my partner's virus protection is coming up with "Threat detected" every minute on practically every site my partner visits on the Internet. You will appreciate that we cannot run any virus checks as we cannot get into the computer.

Any suggestions would be very much appreciated.

Compused
 

A:No bootable device - insert boot disk and press any key

Any luck with this?
 

http://www.techspot.com/community/topics/no-bootable-device-insert-boot-disk-and-press-any-key.201065/
Relevancy 17.63%

Hello, I'm new here. I'm trying to fix my sons Asus laptop. it won't connect wirelessly but will connect via ethernet cable. device manager has exclamation point beside network controller. I cannot download drivers for it. can you help?
 

A:Asus X53E network controller issue/no wireless

"I cannot download drivers for it"... Why? Can you get the driver from here:
http://support.asus.com/download.aspx?SLanguage=en&p=3&s=114&m=X53E&os=&hashedid=mDFYFQWEpTitMwA6
If the driver won't install, the Wifi card may be bad... Something that doesn't happen very often
 

http://www.techspot.com/community/topics/asus-x53e-network-controller-issue-no-wireless.201175/
Relevancy 18.06%

Wired & Wireless Connections simultaneously

The question is how to configure LAN connections on PCs

please see attached file for details
https://www.dropbox.com/s/eoo80ew849wti9d/HomeNetworkConfigQuestion.jpg
 

A:Wired & wireless connections simultaneously

Hey AttTio. Is your diagram correct?. I see the connection from the switch going to one pc that's wired and another that is connected wirelessly. What happens if you connect both pc's straight to the router?. You could have a bad switch or the cable between the router and switch is bad if you get no connection in Ethernet mode as shown
 

http://www.techspot.com/community/topics/wired-wireless-connections-simultaneously.200782/
Relevancy 21.93%

Hi........

I want to buy new mobile and I need your advice
most imprtant for me the speed of the system ,,memory
thing not important for me ( quality of camera,,shape of mobile )
 

A:Any tips on buying a new mobile device?

By mobile I infer you mean cell phone. At any rate, I would prioritize the features and functions that are (a) import to you and (b) you use regularly. The hype on specs may be create bragging rights, but that's not worth $0.02 to me.

I'm and old T**d and love my 3g flip phone for the ease of use designed by Nokia. The so called smartphones are not on my wishlist. If I want pictures (and I take a ton of them), I'm not using any camera in a phone - - I take my handheld which gives me the PAS feature for low-light photograph required for indoor and museums. USEABILITY is big with me.
 

http://www.techspot.com/community/topics/any-tips-on-buying-a-new-mobile-device.200801/
Relevancy 24.08%

I recently bought a powerline adapter to combat my slow wireless speeds and planned on using it for my PC and XBOX 360 when I occasionally use it. The PC install was easy, it was plug and play no problems just installed the latest MSI ethernet drivers and BAM! Wired network, no problem, but today I come home and I felt like playing some GTA Online, so I unplugged the cable from my PC and into the XBOX and it can't connect. I am using a TP-Link AV500 Nano powerline adapter and a BT Home Hub 4 router. I also made a quick video to demonstrate my problem. As mentioned in the video I can use the internet just fine on my PC, the only problem is with the XBOX. Thanks again -hopgop1 NOTE: Video uploaded to YouTube as for some reason TechSpot doesn't support .3GP so I converted it to .MP4 and it doesn't support that either =[ link
 

A:Powerline adapter not working on Xbox 360

Have you seen whether the powerline adapter is compatible to XBOX.
 

http://www.techspot.com/community/topics/powerline-adapter-not-working-on-xbox-360.200440/
Relevancy 28.38%

I have a laptop with the Realtek high definition audio and Dolby home theater installed. After the latest win8.1 update the Realtek program has stopped forwarding the sound through the Dolby program (which it managed to do perfectly before the upgrade). I tried using Viper4Windows too but that didn't work eighter. Is there an option anywhere that will allow me to fix this?
 

A:Realtek and third party program problems

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/realtek-and-third-party-program-problems.200237/
Relevancy 28.38%

I just installed a GTX 760 into my computer which previously had an AMD card. After I installed the card, my Realtek HD Audio Manager decided to stop working.

When I plug audio devices in, it no longer has a window pop up alerting me that I've plugged something in. After opening Realtek HD I saw that nothing plugged in was being detected, except for DIGITAL. Picture below is what I see.

In Control Panel -> Hardware and Sound -> Sound, it says nothing is plugged in in both Playback and Recording except Realtek Digital Output. I can't set anything as default because it is greyed out.

I've tried restarting, reinstalling the drivers(via Device Manager), a system restore to when it was working, nothing has worked so far.
I'm running Windows 7.

Wondering what is wrong? Sound was working fine before I installed the card.
 

http://www.techspot.com/community/topics/hd-realtek-not-detecting-anything-plugged-in-no-sound.200364/
Relevancy 24.51%

I have an LG Monitor that has blown a capacitor in the ac adapter, I want to order a new one, I can only find replacment models and all the amps are different. after reading alot of forums it seems less amps is bad and more is ok.. so this is my question.. my ac adapter has these ratings....

INPUT - 100-240V- 50/60 Hz 0.7 A (0.7 A)
OUTPUT - 12 V --- 2.0 A (2.0 A)

and the one im looking at on ebay is

INPUT - 100-240V- 50/60 Hz 1.0 A
OUTPUT - 12 V --- 2.5 A

The seller claims it will work fine.. Is this true... Thank you
 

A:Replacing an AC adapter for a monitor

I believe it will work fine, yes. But please get another opinion before purchasing.
 

http://www.techspot.com/community/topics/replacing-an-ac-adapter-for-a-monitor.200353/
Relevancy 19.35%

I just got new SSD - Transcend 128GB. Installed Windows. When I cold boot my PC -- from a shut off state -- I get this message before Windows loads: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."

However, if I press Ctrl+Alt+Delete and reboot I come into Windows.

If I enter BIOS from cold boot, it does not detect my SSD. After rebooting it detects my SSD. Seems like the SSD is slow at firing up?

I have run chkdsk and memory test without any errors.

My motherboard is the MSI Z87-G55.
 

A:"Reboot and select proper boot device"

Just installed newest BIOS, it didn't help.

When I go into Board Explorer in BIOS it says SATA port 1 is empty. After reboot it says the same port is occupied by my SSD.

Update: Plugged in another hard drive (non-SSD). Same rules apply to it. On cold boot, none of the drives are detected. After reboot, both drives are detected. I used a non-SSD as system drive before this, worked perfectly.
 

http://www.techspot.com/community/topics/reboot-and-select-proper-boot-device.200351/
Relevancy 18.06%

Hello everyone,

I'm using windows 7 on my pc and try to connect to my home wireless connection .
every time I try to connect and enter the password, it won't be connected.
However, I'm using my laptop and phone to connect and it worked properly.

Please help my problem
Thanks in advance
 

A:Windows 7 unable to connect to wireless connection

How is your wireless Configured. I have seen many issues when using mixed mode in certain Linksys or Cisco Products. What kind of adapter are you using on y our PC for wireless Connection? Has it ever worked?
 

http://www.techspot.com/community/topics/windows-7-unable-to-connect-to-wireless-connection.199928/
Relevancy 18.06%

Are you having a problem with your Internet connection or Wi-Fi? Whatever the problem ? from a flaky connection to Wi-Fi troubles or even no access to the Internet at all ? some router troubleshooting could fix things.

Some of this also applies to your modem, although many Internet service providers are handing out combined router-modem units these days. Your wireless router and modem may actually be the same device.

Reboot the Router Read more
 

http://www.techspot.com/community/topics/how-to-troubleshoot-wireless-router-problems.199886/
Relevancy 15.91%

Hi Could you please tell me if this is possible:
My computer is connected to a wireless network. Can I hook up my D-link (DIR-412) to my computer and use the internet from the computer to output another wireless area?

Thanks sounds complicated.
 

A:Connected to WIFI and want to extend wifi with another wireless router

Where you live is your setup like this?

#1
Internet
Modem
WiFi Router

or

#2
Internet
Modem with built-in WiFi Router

If you want extend the WiFi you would get WiFi Access Point. Or you can take a WiFi Router and disable NAT, SPI, DCHP, then you create a static IP address. 192.168.x.50
 

http://www.techspot.com/community/topics/connected-to-wifi-and-want-to-extend-wifi-with-another-wireless-router.199845/
Relevancy 18.49%

I have three Macbook Pros and two PCs at home. When the PCs are connected to the WiFi the internet slows down for just the MacBooks. When the Macbooks are on and not the PCs they run at fast speed. Is there a way to limit the bandwidth for each device, or would there be something else to do to fix the problem? I need help!
 

A:Wireless Connection Issues

QoS settings in the router webpage.
 

http://www.techspot.com/community/topics/wireless-connection-issues.199808/
Relevancy 18.06%

Hello Everyone !
Right now I am using a broadband connection as my Internet connection and I have a dsl modem which is wi-fi capable. Two of my frnds share the same Internet connection through wi-fi. The problem is whenever any of us watching YouTube videos or downloading something, the whole speed is consumed by that particular computer. I know that many new modems have the capability to limit the bandwidth usage these days but mine is an older one. So I was wondering if there is any way I can limit the bandwidth for each computer.
Thanks !
 

A:How to limit the bandwidth for each computer on a wireless network?

You have to have a modem you can log into an has that type of feature. If you are wired into the network, you should be able to limit the wireless bandwidth and keep your wired bandwidth up. Normally go into the modem, go to setting and wireless setting to limit it.
 

http://www.techspot.com/community/topics/how-to-limit-the-bandwidth-for-each-computer-on-a-wireless-network.193175/
Relevancy 18.06%

Hi Guys I have owned a pair of Steelseries H Fanatic Editions for a while now and I ve really enjoyed them reason I m looking for something new is due to me dropping them a few times and now the right earcup doesn t work all the time Now to all the Audiophiles out there please do not recommend an external Amp DAC and some ridiculous Audiophile grade headphones for the same price that is NOT what I m after I have that stuff already and tried using an external microphone etc I do not like that setup for games I build gaming PC s for quite a few of my friends and family They Steelseries Siberia vs 9H Wireless vs H Elites all choose gaming headsets from a range of brands so I get to try out various headsets Something I can agree with Linus is that Steelseries is one of the brands that quot get it quot the sound quality is very good Steelseries Siberia Elites vs 9H vs H Wireless they re not disappointing like Razer headsets for example Now the different headsets I ve listed in the topic title are on my quot possible candidates quot list but making a decision has become increasingly difficult I ve never had an issue with Steelseries build quality I ve used my H s every single day for hours at a time and they ve never let up until I dropped in on concrete several times NOW MY QUESTION Does anyone here own any of the listed headsets Or anyone who has experience with all According to Linus the H Wireless has better sound quality than the Siberia Elites But I ve also been told the H is the wired version of the H Wireless Can anyone confirm any of this From the spec pages on Steelseries it seems the H uses different drivers than the H-Wireless and also do the H-Wireless really sound that much better over the Siberia Elites Any advice or guidance would be appreciated I do not want to spend any more than the H Wireless is on the headset the wireless isn t that important for me and the ability to plug in consoles or pretty much anything isn t the be all end all BUT I can definitely use it Thanks nbsp

A:Steelseries Siberia Elites vs 9H vs H Wireless

Hi Burty
I am currently in the same predicament I too have a 7H currently, I received the 9H for Xmas and whilst they are pretty nice & they sound good, they are not very loud at all. I think I'm going to get the Siberia Elite and see what they are like.
 

http://www.techspot.com/community/topics/steelseries-siberia-elites-vs-9h-vs-h-wireless.199124/
Relevancy 21.5%

I've a wired network at home like this:

Code:
Internet
|
ADSL Router
|
Dlink Switcher
|
______________
| | |
PC1 PC2 PC3
I'm going to buy a new tablet (ASUS MeMO Pad Smart 10), which supports internet through wifi. I was wondering how can I share the internet access with the new device? What new devices should I buy and what changes are required to my network setup?

Thanks in advance.
 

A:How to share wired Internet access with WiFi device

I figured it out, I need an AP.
 

http://www.techspot.com/community/topics/how-to-share-wired-internet-access-with-wifi-device.199110/
Relevancy 18.49%

Hi - I m new here but looking for some guidance I have been grappling with this issue for a while without success I have effectively two home networks Downstairs I have a broadband line in to a wireless router which is accessed by various portable devices games consoles and has two LAN ports which are occupied by Wireless query networking an NAS and a link Wireless networking query to my cable TV box required Upstairs I have three PCs networked together on a wired network For historic reasons I used the default IP addresses assigned by the wired router which are different from the IP address range assigned by the broadband wireless router I have to disable the LAN connection and plug in a USB wifi dongle if I want any of the upstairs machines to go online I am trying to integrate the two networks without having to run a cable between the two routers for various domestic reasons it is difficult plus I would have to get a separate switch to be able to accommodate the storage TV box currently required to be plugged in downstairs I have a wireless router which says it can be used as an access point and have swapped that in for the upstairs router disabling the DHCP server and setting it as an access point But it still will not connect to the downstairs router Does anyone have any suggestions about what I might be doing wrong alternative approaches or somewhere to look for more detailed information on the subject Many thanks nbsp

A:Wireless networking query

Look for an EoP adaptor like this. One attaches to the broadband end via a RJ45 cable and the other end is upstairs and goes into that router in a LAN slot (not the Wan uplink).
I have a long ranch style home and the signal would have to traverse several walls to get to the other end of the home. The Netgear provides high speed and reliability to the entertainment room for me.
 

http://www.techspot.com/community/topics/wireless-networking-query.199091/
Relevancy 18.06%

Hello,
I really need help, please

So, 3 days ago I was connected to my wifi through wireless just fine
But now, whenever I try to connect, it says "unable to connect"
The signal is fine, the password is right, it would try "connecting" but ends up "unable to connect"
Been working fine all along and suddenly this occur

So, I tried to plug in the LAN cable and through the ethernet, it could connect fine!!

I have no idea why this is! PLEASE HELP!!

My computer: WINDOWS XP (32 bit/Home Edition/Version 2002/Service Pack 3)
Wireless: Intel PROSet/Wireless 14.3.1
 

A:Could not connect to wifi through wireless but could with LAN ethernet

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/could-not-connect-to-wifi-through-wireless-but-could-with-lan-ethernet.198992/
Relevancy 19.35%

HDD 1 tb Seagate hardisk not working,is not visible in the laptop, can b seen in device manager for 1min then gets disconnected automatically and the light on the hard disk starts blinking
 

A:HDD hardisk not working,not visible in the laptop,visible in device manager for 1min then disconnect

If the system worked before with this drive, I would say the drive is bad.
 

http://www.techspot.com/community/topics/hdd-hardisk-not-working-not-visible-in-the-laptop-visible-in-device-manager-for-1min-then-disconnect.198749/
Relevancy 18.49%

Hello

I have an ASUS A54C running Win 7 64bit. Only in the past two months has the WiFi been permanently turned off and each time I have to trouble shoot and apply the fix. I am unsure how those here have solved this issue. Could someone be a touch more clear? Many thanks.
 

A:Wireless keeps turning off

ThePr0f said:





Hello

I have an ASUS A54C running Win 7 64bit. Only in the past two months has the WiFi been permanently turned off and each time I have to trouble shoot and apply the fix...Click to expand...

Not really sure, but I take it you mean you're experiencing random disconnections? First thing I'd do is get in touch with my service provider and have them send a tech guy over. It just might be that the problem lies with outside facilities.

Or you may want to change the power settings on your wireless adapter to "Maximum Performance." You can do that by going to Control Panel, then System and Security. Select "Power Options". Click on "Change plan settings" beside your selected plan, then go to "Change advanced power settings".

Look for -- and expand -- "Wireless Adapter Settings". You should be able to scroll down and choose "Maximum Performance" from there. Click "Apply".

You can, of course, always undo the change if it doesn't work.
 

http://www.techspot.com/community/topics/wireless-keeps-turning-off.197142/
Relevancy 18.49%

Last night all of my wireless devices (kids computers, laptop, IPad, and Wii) suddenly stopped working. The only thing I can seem to come up with is to unplug the router and let sit for a few minutes to see if that corrects the problem. It has not.

What else do I need to do to get my wireless connection back up and running?
 

A:Wireless problems

That was a good try. what was going on for all your devices just before you lost connection?
 

http://www.techspot.com/community/topics/wireless-problems.198430/
Relevancy 18.49%

I have an asus laptop and yestarday I restored it back a few hours becase I deleted a program but now my wireless capability keeps turning off... I tried uninstalling Wireless Console 3 and that did not work..
 

A:Wireless Capability keeps turning off

Make sure there is only one WiFi listed in the Device Manager.
Try uninstalling the WiFi driver but don't delete it
Reboot the PC
On the WiFi Router do a power recycle (power off then power on wait 3 mins)
 

http://www.techspot.com/community/topics/wireless-capability-keeps-turning-off.198376/
Relevancy 18.06%

Hey guys I ve just picked up a new Lenovo Ideapad y p which has been great thus far A major problem I ve been experiencing though is with the wireless connectivity I ve had minor Wireless Unstable Connectivity with Windows 8 problems like this in the past but only on windows machines and only in this house every mac amp gaming console in the house can use the internet flawlessly and I ve had no problems with connection to networks other than my own on this particular laptop The problem I ll be using the internet normally and all of a sudden I will lose internet access Sometimes the icon remains like this with no connection sometimes it tells me I have limited connection and changes Unstable Wireless Connectivity with Windows 8 to this still no connection and sometimes it disconnects completely this The strange thing about this issue is that disconnecting Unstable Wireless Connectivity with Windows 8 and reconnecting to my network or just reconnecting almost always solves the issue temporarily of course A little background I live in a large house so our wifi is set up pretty weird The main connection comes from a cisco wireless router in the basement that we are using as a wired router directly hooked to the modem Directly connected to the cisco is an apple airport extreme that provides the house with wireless Since the signal doesn t cover the whole house there is also an airport express directly connected to the modem This express sits on the other side of the house and is the closest access point to my computer I have tried changing wireless channels to solve this issue no luck Now I could keep using my internet like this having to disconnect and reconnect every minutes but it gets very frustrating especially when streaming or gaming Any ideas or input would be greatly appreciated thanks nbsp

A:Unstable Wireless Connectivity with Windows 8

First I would suggest that you set the MTU to 1492 in the Cisco and all all Airport devices. This will stop what is known as packet fragmentation and reassembly which frequently causes problems.

Secondly, be sure ALL such devices have the latest firmware.

If your ISP connection is using ADSL, ensure all devices plugged into the phone line anywhere in the house have the dsl line filter.

The "limited connection" issue is always a failure to get a response to the DHCP request.




(every mac & gaming console in the house can use the internet flawlessly, and I've had no problems with connection to networks other than my own on this particular laptop).Click to expand...

And this points the finger at the Windows Device Driver - - so look for an updated version for your machine.
 

http://www.techspot.com/community/topics/unstable-wireless-connectivity-with-windows-8.198372/
Relevancy 22.36%

Hi I was wondering can anybody help with the sound on my computer please as we have had none for about 3 weeks now thanks
 

A:No sound device

Please make sure ALL connections are snug. What OS are you using? XP,W7,W8 ?
 

http://www.techspot.com/community/topics/no-sound-device.198384/
Relevancy 43.86%

Hello. I've got a basic problem I guess: I messed up with the Realtek microphone settings and selected "Set Default Device". I tried to fix it but I kinda destroyed my mic. - friends tell me they can hear me like I'm closer to them and they hear me worse than before. I just need to unset the Set Default Device thingy but I don't really know how.. any idea?
 

A:Realtek Microphone "Set Default Device"

Try doing a system restore to a previous time in which this was working correctly.
 

http://www.techspot.com/community/topics/realtek-microphone-set-default-device.197750/
Relevancy 21.5%

I built a new PC about a month ago, and have been using speakers as a primary Audio source. However, I bought a Turtle Beach PX21 headset, and all I can do is watch Netflix/Other media ETC. I can't use Skype or Steam calls because it won't register the headset as a recording device. Why is this ?

I was using this as a reference: http://www.techspot.com/community/topics/turtle-beach-px21-dpx21-computer-problem.162408

,but they don't go over my problem.

Thanks !
 

http://www.techspot.com/community/topics/turtle-beach-px21-isnt-recognized-as-an-audio-device.197747/
Relevancy 18.06%

I ve been struggling for a week now trying to get my wireless internet working on my quot repaired quot Acer computer But till this date I still haven t made any progress At all I feel my sanity slipping recieved no after Wireless HDD new longer having works away from me My computer is able to find all the previous connections I m familiar with but Wireless no longer works after having recieved new HDD I m just not able to connect I Wireless no longer works after having recieved new HDD even dare to say the connections are pretty strong so I doubt it it s the antenna s But really I wouldn t know I ve tried pretty much every quot solution quot I could find on the internet while still waiting for the Acer customer service to respond and for someone to say anything useful at the Acer forums but it s all taking a very long time I recon a specific problem needs a specific solution which is why nothing worked so I m hoping I ll find a clever and patient person out here who would like to help me with this mess Computer It concerns an Acer Aspire X running Windows Repair replaced HDD Details Approximately weeks ago I had to send my computer away to the Acer repair team because of a defective HDD On oktober th I was in possession of my computer again with the HDD replaced and since day one I haven t been able to connect through WiFi I have two laptops sitting here and they manage to connect just fine so I am sure to say I find this very confusing and upsetting Before my computer was taken away everything worked just fine Nothing changed about the router connection key during that time so I m having trouble determining the cause of the issue Today I was bored enough to see if ethernet worked and it does but it s in no way handy for me to use this option I need WiFi Please help me For people who need it a short while ago I made a screenshot of the IP configurations ipconfig all through the command prompt http i tinypic com inv ph jpg nbsp

A:Wireless no longer works after having recieved new HDD

I've been struggling for a week now trying to get my wireless internet working on my "repaired" Acer computer. But till this date, I still haven't made any progress. At all. I feel my sanity slipping away from me.

My computer is able to find all the previous connections I'm familiar with, but I'm just not able to connect. I even dare to say the connections are pretty strong, so I doubt it it's the antenna(s).
But really, I wouldn't know.

I've tried pretty much every "solution" I could find on the internet, while still waiting for the Acer customer service to respond and for someone to say anything useful at the Acer forums, but it's all taking a very long time.
I recon a specific problem needs a specific solution, which is why nothing worked, so I'm hoping I'll find a clever and patient person out here who would like to help me with this mess.

Computer
It concerns an Acer Aspire X3475, running Windows 8.

Repair (replaced HDD) Details
Approximately 2 weeks ago I had to send my computer away to the Acer repair team because of a defective HDD. On oktober 15th I was in possession of my computer again, with the HDD replaced; and since day one I haven't been able to connect through WiFi.
I have two laptops sitting here, and they manage to connect just fine, so I am sure to say I find this very confusing and upsetting.
Before my computer was taken away, everything worked just fine. Nothing changed about the router/connection/key during that time, so I'm having trouble determining the cause of the issue.

Today I was bored enough to see if ethernet worked, and it does, but it's in no way handy for me to use this option. I need WiFi. Please, help me.

For people who need it, a short while ago I made a screenshot of the IP configurations (ipconfig/all) through the command prompt: http://i43.tinypic.com/inv3ph.jpg
 

http://www.techspot.com/community/topics/wireless-no-longer-works-after-having-recieved-new-hdd.197287/
Relevancy 18.06%

Hi,

There's home wireless connection that my laptop won't connect to on its own. This wireless connects after the laptop has been connected to the router via the Ethernet cable, and stays connected with the cable unplugged until it drops (it's normal for my connection to drop sometimes), and then won't reconnect by itself again.

My wireless has wpa2-psk. OS is Vista.

Thank you.
 

A:Wireless only connects after Ethernet cable connection

Hey Sammy2. I assume your machine connected before with no connection issues.
Which Vista are you using,32 or 64 bit, and what Service Pack level is it on?
Do you have and use a good Anti-Virus/Anti-Malware cleaner?
When you lose your connection, is the Internet and wireless l.e.d.'s on the router still on?
Are there any other pc's that connect to this network?
When you state it won't connect again automatically, what do you do to get an Internet connection again?
 

http://www.techspot.com/community/topics/wireless-only-connects-after-ethernet-cable-connection.197616/