Windows Support Forum

Rosewill RX-358 ext. hardrive. Safe to operate with fan off?

Q: Rosewill RX-358 ext. hardrive. Safe to operate with fan off?

Newegg com - Rosewill RX- V SLV amp Silver amp amp SATA to USB amp eSATA External Enclosure w amp Int mm Fan Here's a off? RX-358 fan Rosewill Safe ext. hardrive. with operate to link to my product I've got a TB WD green drive in it I'm wondering if I can turn the fan switch Rosewill RX-358 ext. hardrive. Safe to operate with fan off? off on this when this is hooked up to my popbox media player which reads my p mkv movies from the hardrive I notice the green drive spins down on it's own when I turn off my popbox which is important but the fan doesn't turn itself off any I don't want to leave it on all the time nor do I want to have to be manually turning it off and on all the time With the fan turned off can anyone tell me what's the coolest orientation for enclosure to be in Vertical horizontal upside down When the fan grille is facing up the hard drive is inverted I know hard drives work fine vertically but I wasn't sure about inverted Ofcoarse I'll turn the fan on when I hook hardrive up to PC for mass file transfers

Relevancy 100%
Preferred Solution: Rosewill RX-358 ext. hardrive. Safe to operate with fan off?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Rosewill RX-358 ext. hardrive. Safe to operate with fan off?

Personally I would suggest not too....because heat is the number one factor in HDD failures. Having a look at the link you provided and reading through some of the feedback posts, over all the unit has a good rating. There are a few that mention leaving the fan on when unit is plugged in due to the overheating issue.

http://www.sevenforums.com/hardware-devices/204910-rosewill-rx-358-ext-hardrive-safe-operate-fan-off.html
Relevancy 74.39%

i'm having problems with my computer coming on.believe me,i've tried everything concerning electrical outlets,cords,etc.not that!my computer comes on but the hardrive won't kick in until repeated manual turnoffs.one time i had NO power,or at least that's what it seemed like,so i turned computer off,unplugged it,changed outlet in powerserger and guess what,it had power...weird..pretty frustrated here...i think it's possessed!!any HELP would be greatly appreciated..have a great day and thanks...
 

Relevancy 63.21%

I already posted yesterday but i think mypost got lost My computer has gone crazy If I log onunder normal circumstances I cannot get to my internet no system restore and it deactivated mcacfee so im on safe mode i tried to Can mode!! only operate in safe do a system restore here and it saying no restore points for some reason someobdy please help me This is my hijack log from safe mode should i try to run in it in regular mode Logfile of HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS system svchost exe C WINDOWS Explorer EXE C WINDOWS system ctfmon exe C Program Files Can only operate in safe mode!! Internet Explorer iexplore exe C Documents and Settings Administrator YOUR-D F B A Can only operate in safe mode!! Local Settings Temporary Internet Files Content IE NJQ C AG HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Default Page URL http ie redirect hp com svs rdr TYPE amp tp iehome amp locale EN US amp c Q amp bd presario amp pf desktop R - HKCU Software Microsoft Internet Explorer Main Default Search URL http ie redirect hp com svs rdr TYPE amp tp iesearch amp locale EN US amp c Q amp bd presario amp pf desktop R - HKCU Software Microsoft Internet Explorer Main Search Bar http ie redirect hp com svs rdr TYPE amp tp iesearch amp locale EN US amp c Q amp bd presario amp pf desktop R - HKCU Software Microsoft Internet Explorer Main Search Page http ie redirect hp com svs rdr TYPE amp tp iesearch amp locale EN US Can only operate in safe mode!! amp c Q amp bd presario amp pf desktop R - HKCU Software Microsoft Internet Explorer Main Start Page http ie redirect hp com svs rdr TYPE amp tp iehome amp locale EN US amp c Q amp bd presario amp pf desktop R - HKLM Software Microsoft Internet Explorer Main Default Page URL http www yahoo com R - HKLM Software Microsoft Internet Explorer Main Default Search URL http us rd yahoo com customize ie defaults su msgr http www yahoo com R - HKLM Software Microsoft Internet Explorer Main Search Bar http us rd yahoo com customize ie defaults sb msgr http www yahoo com ext search search html R - HKLM Software Microsoft Internet Explorer Main Search Page http us rd yahoo com customize ie defaults sp msgr http www yahoo com R - HKLM Software Microsoft Internet Explorer Main Start Page http ie redirect hp com svs rdr TYPE amp tp iehome amp locale EN US amp c Q amp bd presario amp pf desktop R - HKCU Software Microsoft Internet Connection Wizard ShellNext http go microsoft com fwlink LinkId O - BHO MyWebSearch Search Assistant BHO - A FAF - E- cf- - F A D - C Program Files MyWebSearch SrchAstt bin MWSSRCAS DLL O - BHO Yahoo Toolbar Helper - D -C F - EFB- B - ECA - C Program Files Yahoo Companion Installs cpn yt dll O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - C Program Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO mwsBar BHO - B EA -A - -B BB- DE CCA - C Program Files MyWebSearch bar bin MWSBAR DLL O - BHO no name - A E- - EAE-A - D F E C DE - C Program Files Starware bin Starware dll O - BHO Yahoo IE Services Button - BAB B B- BC- B - D - FC DE A - C Program Files Yahoo Common yiesrvc dll O - BHO SSVHelper Class - BB-D F - C-B EB-D DAF D D - C Program Files Java jre bin ssv dll O - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - c program files google googletoolbar dll O - BHO hpWebHelper Class - AAAE A- FFF- - C F- D DCB - C WINDOWS pchealth helpctr Vendors CN Hewlett-Packard L Cupertino S Ca C US plugin WebHelper dll O - BHO Google Toolbar Notifier BHO - AF DE - D - -B FA-CE B AD D - C Program Files Google GoogleToolbarNotifier swg dll O - Toolbar Yahoo Toolbar - EF BD -C FB- D - F- D F - C Program Files Yahoo Companion Installs cpn yt dll O - Toolbar My amp Web Search - B EA -A - -B BB- DE CCA - C Program Files MyWebSearch bar bin MWSBAR ... Read more

https://forums.techguy.org/threads/can-only-operate-in-safe-mode.601016/
Relevancy 63.21%

Howdy, have a trojan that won't let me boot up in safe mode. Do I need to boot off the boot disk and wipe? Thanks.

http://www.bleepingcomputer.com/forums/t/269656/cant-operate-in-safe-mode/
Relevancy 63.21%

Hi

It shocks me that safe mode does not work after pressing f8 or f5. I dont understand why ??????????? can somebody talented help me now. it is very important in order to sacn for virus.

thank you

I using compaq presario machine

A:safe mode does not operate.................

Are you tapping F8 repeatedly when you turn on the computer? some times it takes a couple of tries to get the timing right

http://www.techsupportforum.com/forums/f10/safe-mode-does-not-operate-124124.html
Relevancy 63.21%

I have a major problem with my computer, it will only work in safe mode. I've tried system restore, last known configuration, and debugging mode, all with no luck. I have a Dell just over a year old and running Vista Home Premium 32bit. Please help! Thank you. I don't know what else to try.

A:Can only operate in safe mode

sterling, welcome to the forums, you have come to one if not the best forum on the net.

What, exactly, happens when you try to boot into normal Windows Destop?

Perhaps I am not the one to help here but, giving us the blow by blow of the problem will help others help you better, otherwise, speculations will be the only thing we can give you.

http://www.vistax64.com/general-discussion/197900-can-only-operate-safe-mode.html
Relevancy 62.35%

Hi, We had recently went and bought and installed windows 8.1, however I had to restore computer like it was new to put it on here and now my question is what do I need on here so it will operate normally? We cant watch videos, look at pics normal, pop ups come up, cant get on a lot of sites that we could before, etc. My old one was Vista and it had all kinds of programs and worked just fine for everything, now I only have a couple things in programs ugh, I'm so confused, please HELP!!! I have adobe reader and Java s far lol

A:what downloads i need for computer to be safe and operate

Flash & Shockwave:

Adobe - Test Adobe Shockwave Player

You need 32 & 64 bit Java.

Avast free:

AVAST 2014 | Protect your Windows PC

TrendMicro Housecall:

Free Online Virus Scan - Antivirus Software - Trend Micro USA

Run the TrendMicro Housecall & a full scan with Avast.

Run sfc /scannow & Dism /Online /Cleanup-Image /RestoreHealth in administrator command prompts.
They are slow so be patient with them.

That's all for now.

http://www.eightforums.com/general-support/42199-what-downloads-i-need-computer-safe-operate.html
Relevancy 62.35%

Alright so I built a brand new computer with one of my friends about ten days ago and has worked fine since then Yesterday July I went to a family thing and left my computer on When I came back it was shut off so out of common sense I turn it back on Start it normally and about of cannot Mode Safe out operate Computer seconds after the desktop loads it just shuts off No warning no nothing This now happens every time I try to use it out of safe mode and I've tried everything I can think of It only runs in safe mode now I've tried deleting a bunch of things that I don't use in safe mode which did nothing tried system recovery which did nothing it was restored to about hours to before I left on the rd I've done a virus scan and there was nothing to be removed So I don't know what else to do and I need help If PC specs or anything like that would help let me know and thanks a lot

A:Computer cannot operate out of Safe Mode

when Windows will run in safe mode only, it usually means a bad or conflicting third-party driver. Third-party drivers are not loaded in safe mode so that's why Windows is able to start.

http://www.techsupportforum.com/forums/f217/computer-cannot-operate-out-of-safe-mode-584883.html
Relevancy 61.49%

Referred from here http www bleepingcomputer com forums t virus-causes-computer-to-boot-only-in-safe-mode OBTwo days ago I was infected by a virus An adobe screen pops up then I get a screen for virus scan system pro and do I want to start a scan I say no then start my Mcafee virus scan As it scans my computer I get porn pop ups and screens asking me to run a virus scan I keep saying no and delete the porn pop ups Mcafee finds problems and quarantined files but it still scans Before Mcafee can finish scanning a window pops up saying that computer will shutdown in twenty seconds I watch as my computer shuts down mcafee and then everything else I start it up again the screen is black then for a split second the windows XP screen comes on After that it goes black and then it asks to run in safe mode I go up to safe mode with networking It starts mcafee is disabled malwarebytes finds nothing and I try spybot super anti spyware spyware blaster and trend micro rubotted Nothing works and I am stuck in safe mode I tried to install hijack this but the safe mode screen is too big to hit the accept button I unistalled mcafee and am completely lost I do not have a windows xp disc or an xp boot disc Please help

A:Virus will only allow me to operate computer in safe mode

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for posting the results.Close the program window, and delete the program from your desktop.Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet. Information on A/V control HERE

http://www.bleepingcomputer.com/forums/t/272888/virus-will-only-allow-me-to-operate-computer-in-safe-mode/
Relevancy 61.49%

I have tried to follow the threads in previous threads re: popups, stinkware and so much other crap. When I boot up in normal mode, the normal desktop icons appear briefly, then they disappear and I have to resort to various tricks to get into safe mode. Initially whenever I tried to access HJT everything would close up again except my basic desktop with background theme. I was going to post my log file but my other machine has just given up the ghost and now gives me a corrupt/missing file message

A:spyware has taken over my machine, can only operate in safe mode

Welcome to TSF.

Do you can't boot up at all now? If you are using XP, try using the XP cd and enter the Recovery Console to repair it.

http://www.techsupportforum.com/forums/f284/spyware-has-taken-over-my-machine-can-only-operate-in-safe-mode-22029.html
Relevancy 61.06%

I can only run my machine OS Windows XP Prof SP in safe mode When I try to start Windows XP in normal mode I get the blue screen after a few minutes and a message that says in to Safe files. Corrupted data able Mode Only operate Driver IRQL not less or equal and then a series of Stop codes This situation started after I had been using the hibernate option for a few days After I had shut down fully and restarted I got a message stating that Windows had successfully installed the following update Microsoft Browser Choice Screen Update for EEA Users of Windows XP KB At the same time I got a Microsoft Security Centre message telling me that McAfee Virus protection was not operating Then my computer crashed and I got the blue screen It may be relevant Corrupted data files. Only able to operate in Safe Mode that a week earlier I had received a pop-up advertising virus protection When I tried to close it it Corrupted data files. Only able to operate in Safe Mode started to download so I closed my browser quickly and ran both a McAfee and Malwarebytes scan The Malwarebytes found and dealt with the following Registry Keys Infected HKEY CURRENT USER SOFTWARE Microsoft Windows CurrentVersion Ext Stats d db d - ec - a -bd - e e bb Adware MyWebSearch - gt Quarantined and deleted successfully HKEY CURRENT USER SOFTWARE Microsoft Windows CurrentVersion Ext Stats d f -b fe- -bf - ab d d Adware MyWebSearch - gt Quarantined and deleted successfully Registry Values Infected HKEY CURRENT USER SOFTWARE Microsoft Internet Explorer URLSearchHooks d f -b fe- -bf - ab d d Adware MyWebSearch - gt Quarantined and deleted successfully Registry Data Items Infected HKEY LOCAL MACHINE SOFTWARE Microsoft Security Center AntiVirusDisableNotify Corrupted data files. Only able to operate in Safe Mode Disabled SecurityCenter - gt Bad Good - gt Quarantined and deleted successfully HKEY LOCAL MACHINE SOFTWARE Microsoft Security Center FirewallDisableNotify Disabled SecurityCenter - gt Bad Good - gt Quarantined and deleted successfully Folders Infected C Program Files MyWaySA Adware MyWebSearch - gt Quarantined and deleted successfully C Program Files MyWaySA SrchAsDe Adware MyWebSearch - gt Quarantined and deleted successfully Files Infected No malicious items detected I have tried to restore my system to earlier dates but on each occasion I get a message telling me the attempt has been unsuccessful I have also tried restoring the system to the last known configuration that worked but this was also unsuccessful The event viewer has lots of red errors listed I have reproduced some of them below System Errors Event ID The IPSEC Services service depends on the IPSEC driver service which failed to start because of the following error A device attached to the system is not functioningEvent ID The following boot-start or system-start driver s failed to load AFDFipsintelppmIPSecmfehidkMPFPMRxSmbNetBIOSNetBTRasAcdRdbssTcpipWS IFSLEvent ID The DHCP Client service depends on the NetBios over Tcpip service which failed to start because of the following error A device attached to the system is not functioning Event ID The Windows Search service terminated with service-specific error x D Event ID The KService service hung on starting Application ErrorsEvent ID The search service has detected corrupted data files in the index The service will attempt to automatically correct this problem by rebuilding the index Context Windows Application SystemIndex CatalogDetails xc xc Results for Microsoft Product Windows Operating System Version Event ID Event Source Windows Search Service File Name tquery dll mui The content index cannot be read xc Event ID The plug-in in lt Search TripoliIndexer gt cannot be initialized Context Windows Application SystemIndex CatalogDetails The content index cannot be read xc Event ID MCSCAN Engine Initialisation failed Engine returned error Event ID The gatherer object cannot be initialized Context Windows Application SystemIndex CatalogDetails The conte... Read more

http://www.bleepingcomputer.com/forums/t/308403/corrupted-data-files-only-able-to-operate-in-safe-mode/
Relevancy 61.06%

I have ran the BSOD Dump amp System File Collection app with the results attached I attempted to run PERFMON report but was unsuccessful Error Mode 7 but with Win BSOD in in will Safe operate networking Continual cannot find specified path I am running Win Home Premium bit and this is the original OS that was preinstalled with my laptop ASUS G VX The system is approximately years old and I have never re-installed the OS I continuously run system mechanic to monitor and clean out the drive and also use Norton to supplement system mechanic The system was gradually slowing down and Continual BSOD in Win 7 but will operate in Safe Mode with networking occassionally freezing up I upgraded the CPU with a T chip and the system seemed to run fine but the temps definitely increased fan constantly running but rpms varying with temps I use SpeedFan to monitor temps The Continual BSOD in Win 7 but will operate in Safe Mode with networking lagging once again started so I had a deep scan and repair of the hard drive performed took all night to run This was done approximately one week ago The system afterward now continually shuts down BSODs with no rhyme or reason I do not know if it is hardware GPU or hard drive or software I have re-installed the original CPU to see if this was the problem but the BSODs continue I am capable of operating in Windows Safe Mode with Networking I am relatively computer illiterate and really have no idea what I am doing any assistance is appreciated Thanks

A:Continual BSOD in Win 7 but will operate in Safe Mode with networking

Sorry I didnt even look at the dump but i can tell you that system mechanic is your problem, if you can boot in safe mode then you may be able to enter windows and do a system restore back to before you did the scan (usually F2, F8 or F12 dependant of your system)
If you manage to do boot into safe mode and successfully restore then immediately remove System Mechanic and also Norton 360... these 2 so call programs are more harmful than good
In failing that you can not gain a restore then you will have to resort to a system repair, its best if you can borrow a windows disc from someone or if not then you may download the correct ISO form here Download Windows 7 ISO (Official 32-bit and 64-bit Direct Download Links) ? My Digital Life
I hope that this info is most helpful to you

http://www.sevenforums.com/bsod-help-support/231782-continual-bsod-win-7-but-will-operate-safe-mode-networking.html
Relevancy 60.2%

If I try to start my computer in quot normal quot mode it will run for a short period of time then give me the blue screen with the error C DOCUME MRS FLE LOCALS Temp WERefdb dir Mini - dmp C DOCUME MRS FLE LOCALS Temp WERefdb dir sysdata xml BCCode e BCP C BCP F B BCP ED C BCP OSVer SP Product The following is the contents of my HighJackThis Log Any help would be greatly appreciated able to Toshiba Only Blue Screen - operate in Satellite safe mode Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Safe mode with network support Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS system svchost exe C WINDOWS Explorer EXE C Program Files Microsoft Office OFFICE OUTLOOK EXE C Program Files Microsoft Office OFFICE WINWORD EXE C WINDOWS system ctfmon exe C Program Files Mozilla Firefox firefox exe C Documents and Settings Mrs Fleury Desktop HiJackThis exe R Toshiba Satellite Blue Screen - Only able to operate in safe mode - HKCU Software Microsoft Internet Explorer Main Search Bar http g msn com SEENUS SAOS FORM TOOLBR R - HKCU Software Microsoft Internet Explorer Main Search Page http g msn com Toshiba Satellite Blue Screen - Only able to operate in safe mode SEENUS SAOS FORM TOOLBR R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Toshiba Satellite Blue Screen - Only able to operate in safe mode Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer SearchURL Default http g msn com SEENUS SAOS FORM TOOLBR R - HKCU Software Microsoft Internet Explorer Main First Home Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Local Page R - HKLM Software Microsoft Internet Explorer Main Local Page R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO RealPlayer Download and Record Plugin for Internet Explorer - C E -B - BC - - C CA - C Program Files Real RealPlayer rpbrowserrecordplugin dll O - BHO DriveLetterAccess - CA D E- - CF- E - - C WINDOWS System DLA DLASHX W DLL O - BHO SSVHelper Class - BB-D F - C-B EB-D DAF D D - C Program Files Java jre bin ssv dll O - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - c program files google googletoolbar dll O - BHO Google Toolbar Notifier BHO - AF DE - D - -B FA-CE B AD D - no file O - Toolbar amp Google - C B - - d - B - A CD F - c program files google googletoolbar dll O - HKLM Run CeEPOWER quot C Program Files TOSHIBA Power Management CePMTray exe quot O - HKLM Run LtMoh quot C Program Files ltmoh Ltmoh exe quot O - HKLM Run AGRSMMSG AGRSMMSG exe O - HKLM Run Apoint quot C Program Files Apoint K Apoint exe quot O - HKLM Run EzButton quot C Program Files EzButton EzButton EXE quot O - HKLM Run CeEKEY quot C Program Files TOSHIBA E-KEY CeEKey exe quot O - HKLM Run PadTouch quot C Program Files TOSHIBA Touch and Launch PadExe exe quot O - HKLM Run SmoothView quot C Program Files TOSHIBA TOSHIBA Zooming Utility SmoothView exe quot O - HKLM Run ZoomingHook c WINDOWS System ZoomingHook exe O - HKLM Run TPNF quot C Program Files TOSHIBA TouchPad TPTray exe quot O - HKLM Run SSC UserPrompt quot C Program Files Common Files Symantec Shared Security Center UsrPrmpt exe quot O - HKLM Run IgfxTray C WINDOWS system igfxtray exe O - HKLM Run HotKeysCmds C WINDOWS system hkcmd exe O - HKLM Run ATIPTA quot C Program Files ATI Technologies ATI Control Panel atipta... Read more

A:Toshiba Satellite Blue Screen - Only able to operate in safe mode

BUMP, please

http://www.techsupportforum.com/forums/f284/toshiba-satellite-blue-screen-only-able-to-operate-in-safe-mode-307922.html
Relevancy 60.2%

HELP My desktop with XP PRO on it which is operate mode and boot can't volume" BSOD -"unmountable in safe not connected ever to the internet and which I use for office files etc has suddenly displayed the BSOD no matter what I do BSOD and can't operate in safe mode -"unmountable boot volume" Chosing Safe Mode results BSOD and can't operate in safe mode -"unmountable boot volume" in a display of files then the BSOD BSOD and can't operate in safe mode -"unmountable boot volume" returns Chosing Last good configuration does nothing BSOD returns Basically the computer will not boot The message comes up Unmountable Boot Volume The message also reads Stop ED x F E xC x x I tried to run various security disks and programs and the operating system Utility disk but nothing will run because Windows does not continue beyond the BSOD I've never had any problem with this desktop computer previously The only thing I can think of which I installed recently was a Canon Printer Scanner Fax installation disk I put that installation disk in the cd drive but it also will not run I hope someone out there can assist with this vexing problem as I have run out of ideas Oh one more thing No I cannot find a boot disk and No I do not have an XP Pro installation disk GUY

A:BSOD and can't operate in safe mode -"unmountable boot volume"

How to make a bootable CD to access the Recovery Console.
 
Please download ARCDC from Artellos.com.
 
    * Double click ARCDC.exe
    * Follow the dialog until you see 6 options. Please pick: Windows Professional SP2 & SP3
    * You will be prompted with a Terms of Use by Microsoft, please accept.
    * You will see a few DOS screens flash by, this is normal.
    * Next you will be able to choose to add extra files. Select the Default Files.
    * The last window will allow you to burn the disk using BurnCDCC
 
Your ISO is located on your desktop.
 
In order to boot from this CD you may need to change the boot order in the BIOS so that the CD-ROM is the first device in the boot order.
 
Once you have booted from the CD you will come to a screen which will offer the options to Install or Repair, select R.
 
When you reach the command prompt type chkdsk /r then press Enter.  Please observe that there is a space between chkdsk and the forward slash r (/r).
 
Chkdsk has five stages which will display the percentage of each stage as it runs.  This can take a very long time to run, it may even appear to have stalled.  Please do not stop this process as it can cause severe damage to the operating system.

http://www.bleepingcomputer.com/forums/t/518050/bsod-and-cant-operate-in-safe-mode-unmountable-boot-volume/
Relevancy 55.04%

OK So I am using Win XP Pro w SP GB Ram on a computer I built AMD XP Thoroughbred programs. or load, taskmanager, operate no No No ability to any No mode scan, safe explorer.exe, ability, B core CPU It is was still a nice machine believe it or not Here is my No taskmanager, No explorer.exe, No safe mode ability, no ability to load, scan, or operate any programs. problem One day I booted up and logged in No icons appeared on the desktop I figured corrupt explorer exe file and went to ctrl alt del and nothing So rebooted and then the icons were there I tried to load from Start gt Programs and it freezes up and the quot hourglass quot mouse pointer is displayed instead of the arrow pointer like my cpu is at at all times Now I realize that something is seriously wrong All drivers No taskmanager, No explorer.exe, No safe mode ability, no ability to load, scan, or operate any programs. are as up to date as they ever will be and all things were functioning properly until No taskmanager, No explorer.exe, No safe mode ability, no ability to load, scan, or operate any programs. I got this whatever Trojan virus Im sure virus at the least I cannot even boot to a CD Cannot get into safe mode at all And the task-manager is disabled along with me being able to open anything I can still log on fine of course and then it is all downhill from there So this is what I do I go through this reboot and tinker for a while and it is futile to waste any time on that I purchase a IDE case to make this internal Hard Drive an external Hard Drive via USB I boot up my Windows laptop and connect this drive via USB and run Norton on it As we all know it is infected many times over Norton states that it removed all infections except for one file which I had Norton delete the file since it was not an important one garbage file In theory I should be able to re-install this hard drive to my XP computer and it should work fine I know better though I hope for the best but I m expecting the worst Well I get the same results I am afraid the viruses damaged the files beyond repair This is where I need help This is where it gets over my computer pay grade Also I ran Adaware on this drive and did a chkdsk f on it as well Might as well be through It only takes and extra hours so what the heck right After all this no luck on getting a good re-boot Still no taskmanager or anything but the splash screen and then the logon screen I was unable to do a registry scan on this drive while it was hooked up via USB That may have helped but I could not do it one i m not logged on that dive anymore so the hive is not active My next step is to get a good copy of explorer exe from another xp pro machine where I don t know and replace the existing one Doubtful that would be the solution but I am willing to try I had two hard drives in the XP machine one for operating system and programs the other for music videos and pictures The fact that I will not need any permissions to make the quot music hard drive quot usable in the windows environment is comforting But I would still like to use the xp computer as it has some nice recording features and equipment that goes with it The fact that the XP machine will not boot from CD leads me to believe that I will have to format the drive then use the XP MB floppy disk sequence to re-install widows xp on it I have a USB MB Floppy drive I know Sad and I will be able to create the quot XP install quot boot floppy s from it I am now glad I picked the floppy drive up for bucks This is a last resort option for me ANY ADVICE AND HELP WOULD BE GREATLY APPRECIATED Thanks J EDIT Moved from XP to more appropriate Am I Infected forum Hamluis

http://www.bleepingcomputer.com/forums/t/320675/no-taskmanager-no-explorerexe-no-safe-mode-ability-no-ability-to-load-scan-or-operate-any-programs/
Relevancy 46.87%

hi i saw the dimesions of the case but im not sure if it can support all video cards and all spu fans and heatsinks plz answer the case that i bought form newegg came good with no damages at all but it had a very thin secc and when i was putting the psu it kinda broke and a friend told me that the challenger is very good and very big big so...
 

A:Rosewill challenger is big?

that's a very nice case for the price. you can fit any video card in it as long as its not over 11 inches long
 

http://www.techspot.com/community/topics/rosewill-challenger-is-big.142849/
Relevancy 46.87%

ROSEWILL vs. WINTEC vs. KINGSTON??
Which is better overall in quality memory?

my selestions are all the same size, same price, same speed
 

Relevancy 46.87%

Hello, I have a question on a Rosewill router. The routing number is RNX-EasyN4 and I must say it is not an easy installation. I can not figure how to connect this wireless internet. I connected it as the directions say, but I cannot connect to the internet when I do so. I did the wizard setup and still can't connect. Is there something I need to provide or do inorder for it to work?
 

A:Rosewill modem?

What kind of Internet do you have? Cable, DSL? From your ISP's (Internet Service Provider) modem, connect a network cable from the modem to the wireless routers proper input. Your computer will have to be temporarily hard-wired to the wireless router to setup the wireless router for the first time. Can you log in to the router? Depending on using DSL or Cable, the router settings for DSL are a bit more complicated than the Cable settings
 

http://www.techspot.com/community/topics/rosewill-modem.136829/
Relevancy 46.44%

I just put in a Rosewill RC200 IDE adapter not so much fore raid but to use an alternate data channel from the fialed ones on an old Tyan Trinty motherboard.

The device works fine but is not set up for raid.

The question is that the board has a header for the HDD activity plug from the LED harness
on the case which normall indicates drive activity when plugged into the motherboard.

I have tried all sorts of pin combinations to the header on the Rosewill but still no LED
activity.

If the board is component side up with the tail facing right and the pins are

1 2

3 4

which set will turn on the activity LED. the manual just indicates the header and
not how it's plugged. The wirews on the HDD plug are orange and white-- white assmedly ground.
 

https://forums.techguy.org/threads/rosewill-ide-adapter-wont-indicate-hd-activity.561218/
Relevancy 46.44%

I am starting to think this thing is defective... Is a Rosewill RCM-3201V web cam that I bought for skype, etc.. I plugged it in and windows detected it, installed drivers, said it was good to go. However, camera is unuseable. Tried windows movie maker, and it is not listed as an available camera. Then, after installing the software on the disk that came with the camera, I see the icon in the bottom right by the clock, and it states the camera is connected. However, all the options with that icon are all greyed out. It detects it, but it is un-useable..

Any advice appreciated!!
 

Relevancy 46.44%

My usb 2.0 wireless N adapter doesn't work with Windows 8 Release, although the Windows 7 drivers worked with the developer preview.
Is there any way I can get this to work, I can't connect via ethernet.

Drivers are here
Rosewill.com - Computer Case, Power Supply, Computer Accessories, Networking, Peripherals. Price, Quality, and Services.

A:Rosewill RNX-N150HG Drivers

I have the same problem. Although I've only tried with the RTM version. If you try to install the driver the same way you do in windows 7 via the setup.exe in compatibility mode of win7 then it will detect the OS to be XP and will give you the option to either install with the wireless client or just the drivers. I tried to just install just the drivers and it did complete the installation but the usb adapter still didn't detect that the drivers were installed. I'm guessing in that case it installed the XP drivers. So if you select to install with the wireless client it will give the you the "irql_not_less_or_equal" error upon restart.

So since none of that above worked I decided to go through the device manager. So I put the folder for Windows 7 x64 from the installation cd on the desktop and removed the cd from the computer just to make sure it wouldn't try to use the XP driver. It detected it and tried to install it but came up with an error of "The hash for the file is not present in the specified catalog file. The file is likely corrupt or the victim of tampering." I've also tried the driver from the Rosewill site both version 1 and 1.1 and both got the same error.I won't be using windows 8 on my desktop until they release a new driver or I'm able to just use ethernet.

http://www.eightforums.com/drivers-hardware/7619-rosewill-rnx-n150hg-drivers.html
Relevancy 46.44%

I have a rosewill rnx-g300ex/lx , that I am trying to find the drivers for Windows 7 64X Pro and the disk that came with it has the ones for Windows 98 and is in Japanese 

A:Rosewill Wireless Card

Yer outta luck... time for a new card/dongle

http://www.computerhope.com/forum/index.php/topic,158082.0.html
Relevancy 46.44%

I'm not sure if this is a hardware, software, or internet transmission problem. My new RCM-3201V Rosewill webcam seems to sometimes work, sometimes not. Sometimes it will show my picture as mostly green and pink, almost unrecognizable. Sometimes the photos freeze or the words skip or repeat. Other times it works fine. My internet is via an antenna to a nearby tower, not satellite, and not a wired system. I suspect that might be the problem? Any ideas?
 

https://forums.techguy.org/threads/rosewill-webcam-problem.843827/
Relevancy 46.44%

I bought a 25 dollar rosewill full atx case from newegg about a year and a half ago that came with a 350W atx psu. Somehow it ran for 1 year running a full atx pentium 3 mobo with 3 hd's and a combo drive, lan card, modem, video card, and a fan. Then it ran for about 2 months on my micro atx mobo with a amd athlon 64 3200+, 4 80mm fans, 1 120mm fan, 2 hd's, combo drive, modem, and a nvidia 8600GT. Somehow it ran all that time with no problems ever. So i went with a new Rosewill Stallion 500w psu, and it hasen't given me a problem yet.
 

A:Rosewill - diamond in the rough?

I've heard very mixed things about Rosewill. I personally own a 17" Rosewill LCD (now a backup monitor since I have a Samsung 226bw) which I've had since about 2005-2006 I think. Never had any issue, worked wonderfully and still does. I also am using one of their PSU's on my current rig, so far so good - been running 4 months with the PC on for days at a time.
 

http://www.techspot.com/community/topics/rosewill-diamond-in-the-rough.101415/
Relevancy 46.01%

Can two of these 2TB Seagate STBD2000101 drives:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148910

be put in this Rosewill R2-JBOD enclosure:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817182144

Also, I have a Windows 7 computer that is around 4 years old. On older computers, drives that are over 2TB may not work. If I put the two 2TB Seagate drives in the enclosure, there will be 4TB total space. Should that probably work on my computer if I select JBOD on the enclosure? If I select JBOD, won't the computer see the two drives as two separate drives instead of one big 4TB drive?

Thanks
 

https://forums.techguy.org/threads/rosewill-r2-jbod-enclosure-questions.1084884/
Relevancy 46.01%

Whenever I use the left-click it highlights, drags, and clicks on things when i barely touch it. the slightest touch makes it click things and its driving me nuts! how do i fix this?

http://www.pcadvisor.co.uk/forum/helproom-1/rosewill-jet-gaming-mouse-problem-4597022/
Relevancy 46.01%

Please redirect if necessary to get my XP to installon a Rosewill RC IDE adapter issue adapter Rosewill RC200 IDE I m not using RAID but the Rosewill Rosewill RC200 IDE adapter issue RAID card which gets me past some bad IDE channels on Rosewill RC200 IDE adapter issue the mainboard The install is being done on old gear because I have not used XP Rosewill RC200 IDE adapter issue before and am doing trial benchwork The big problem seems to be XP finding the correct file and reading it from the Rosewill floppy disk The file is called pnp r sys and the error message repeatedly says quot cannot copy file etc quot Previous installs using Win Pro have read the necessary setup file easily What I m wondering is if there is some setup on the card and its BIOS RAID set info for one drive a Western Digital G on NTFS that I haven t completed properly and so XP cannot find the info read in by the floppy I ve also tried to get an updated driver to read from CD from the driver mfg That also fails The setup is old MSI Slot One mainboard Intel PII mhz K SDRAM Rosewill RC RAID Adapter WD G caviar Acer cd rom floppy The Rosewill manual describes a lot about Sets for Raid but not much about single drive I don t know if that s the issue I got RAID model for future use in larger and newer installs Please redirect this question if necessary and notify if possible nbsp

A:Rosewill RC200 IDE adapter issue

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Thanks for your cooperation.
 

https://forums.techguy.org/threads/rosewill-rc200-ide-adapter-issue.565413/
Relevancy 46.01%

i just bought a rosewill rx353 enclosure , i install my sata HD into it, plugged it in and now my laptop doesn't recognize the HD or anything....tried on the website itself no answers for trouble shooting , can anyone please help, i need stuff off this HD in a time sensitive matter, thank you
 

Relevancy 45.58%

Hi,

First post.. I just installed Windows 7 and for the most part all went ok. The only issue I seem to be having concerns my Rosewill RC-200 IDE raid card. Card works fine as an IDE card. However, I cannot get the raid functions to work.

The card uses a ?Silicon Image SiI 0680 ATA-133 Medley Raid Controller? chipset. The only thing I found a bit odd about the install was that W7 recognized the card and installed its own drivers instead of asking for drivers supplied by the manufacture. Not sure if this is an issue or not, but I have had to remove the raid set for now until I figure out what is wrong

Most of my hardware is new, MSI 770-C45 mobo, EVGA 9500GT video, Rosewill RC-200 PCI card.
I plan on calling the manufacture on Monday but thought I would check to see if anyone else has had this particular problem.
Regards,
Danny

A:Rosewill RC-200 raid card issues with Windows 7

Bump... Anyone... I noticed that the driver version reported by W7 is 1.0.5.0 while the manufacture shows only 1.0.1.7 as being the latest.

Any thoughts...

ck

http://www.sevenforums.com/hardware-devices/52318-rosewill-rc-200-raid-card-issues-windows-7-a.html
Relevancy 45.58%

I have a Rosewill RNX-N250PCe Wireless Adapter which doesn't work. I did as the quickstart guide said: Install drivers from cd, shut down, install card, and then reboot. The Network and Sharing Center says no connections are available and windows troubleshooter says there is a problem with the Wireless Adapter Driver. I tried updated drivers from Rosewill's website, still nothing. At this point I'm about ready to give up. If anyone has any advice or would like additional information, please post a reply. Thanks.

A:Rosewill RNX-N250PCe Wireless Adapter Not Working

would you do the following
------------------------------------------------------------------------
Device Manager

Please Post back the results in device manager as requested below

You will now need to take a screen shot and copy that back to the working PC.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the screen shot and attach the screen shot in a reply on the forum here.
If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

how to access device manager for different windows versions
How do I get into Windows Device Manager?

Hold the Windows key and press Pause key, should open to allow device manager to be seen, see the menu on the left hand side

on a laptop you may need to use Hold the Windows key and press FN key + the pause key

If the above does not work then

For Windows 7 or VistaClick on the Start Orb > In the Start Search box type > device manager and then press enter
or
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
start > control panel> System and Security> Device Manager
For Windows 8If you happen to be using a keyboard with Windows 8, the quickest way to open Device Manager is via its shortcut on the Power User Menu, accessible by pressing the WINDOW key and the X key together.
If on a touch screen - have a read here How To Open Device Manager in Windows 8 & 8.1
Once you are in device manager then navigate to:
network adaptors, click on the + > post back the devices that are listed under network adapters
are there any yellow ! ? or a Xpost a screen shot of the device manager - network adapters

To post a screen shot of the active window.
For Windows XPHold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
For windows Vista or Windows 7you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool
How to use the Windows Snipping Tool
For Windows 8you can use the snipping tool > Open Snipping Tool (From the Windows 8 Start Screen, type "snip" and press enter.
>Press the Esc. key.
>go back to your Windows 8 start screen - Swipe from left or press Window Button
>Press Ctrl+PrntScr button to use Snipping Tool
How to use the Windows Snipping Tool
To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.

http://www.techsupportforum.com/forums/f217/rosewill-rnx-n250pce-wireless-adapter-not-working-764202.html
Relevancy 45.58%

This is pretty much what i wrote to the rosewill tech support I am having trouble with memory in my computer that I have bought from Rosewill I have Solved: A8nsli deluxe Rosewill Memory/ two modules of ROSEWILL MB PC RAM and an ASUS A N-SLI Deluxe motherboard both of the Solved: Rosewill Memory/ A8nsli deluxe modules work individually and the computer boots but when put together the motherboard gives me an error quot system failed memory test quot One of the modules i ve had since I built the computer and the second that I had originally was replaced twice by newegg because the memory was bad So after calling ASUS for help they told me to ask you a is my memory compatible with my motherboard and b if yes am I able to use of the modules simultaneously and c the person i spoke with at ASUS mentioned that it could be a timing issue since both modules work individually but not together is this the problem that I am having and if so how do i fix it to identify the memory modules i am using I will give the numbers that I see on the package NEW module nd replacement of one of the originals RW - - C G BAI OLD module i ve had this since i built the computer RW - - C G CB the only useful info they ve sent me so far is quot Please make sure the memory modules run at DDR which means the motherboard FSB is MHz And please let us know if both of the two modules can run at DDR If you can t use those RAM please contact your retailer for RMA quot Now i have already RMA d twice i d really like to have gig ram instead of just mb and i ve spent about bux fedexing things back so I want to exhaust all my options before i RMA again One suspicion i had was that the two memory sticks although the same model number might be different versions because the old one has black chips on both sides whereas the new one only has them on one side Okay thanks for reading this far i really appreciate it nbsp

Relevancy 45.58%

I have and external hard drive that is capable of using esata so i bought this card to give myself available esata ports on my HP pavilion a1130n. I followed the instructions as far as setup. Also, i checked to verify that the driver was installed, but everytime i go to connect my external hard drive to the esata port it disappears from my computer and i am unable to access it. Any help with this would be appreciated, whether it be helping me getting this to work or just informing me that i am unable to use this controller. Thank you.
 

A:help installing Rosewill Sata II/ATA 133 PCIe Card RC-216

read the reviews here http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16816132014
 

https://forums.techguy.org/threads/help-installing-rosewill-sata-ii-ata-133-pcie-card-rc-216.808287/
Relevancy 45.58%

I have an older machine with the following specs CPU Q DIMM pc ddr mhz Patriot GB x GB MB Asus P ne-SLI HDD WD GB GPU PNY GForce Ti PSU - Seasonic W Works fine for its uses - internet streaming and Microsoft Office No gaming When it was running Win the lack of USB became a problem so I purchased a Rosewill RC- two-port USB card It plugged into the PCIE port on the MB which is right below the GPU All worked fine So ever since I upgraded to Win I have been getting black screens almost daily Doesn't matter if PC is idle or doing something The screen will go black suddenly and will not respond although the computer appears to be running Computer is unresponsive and does not complete tasks downloading etc that were going on when the black screen appeared On restart no error or other indication of anything specific USB screen black causing in Rosewill 3.0 Win Card 10 appears in the Event Viewer I tried a lot of things Replaced RAM replaced PSU Turned off all sleep hibernate fast start options Reinstalled Win Replaced old old GPU Last week I took the machine apart and Rosewill 3.0 USB Card causing black screen in Win 10 put it together piece by piece letting it run overnight after each piece All ran fine until Iinstalled the Rosewill RC- two-port USB card Back to black screens in less than an hour So here's the advice question How likely is it that the Rosewill card is bad and that I just need a new USB card The card seems to work fine itself FWIW It has a molex connector and the black screens happen whether it's connected or not One thing that has occurred to me is that due to the location of the lone PCIE port on the MB the Rosewill RC- two-port USB card sits right up against the bottom of the GPU card - almost touching and covering the fan Is there a way to tell if the GPU is just overheating because of it On the other hand there's nothing in the event viewer about the card or drivers having any issues And Rosewill 3.0 USB Card causing black screen in Win 10 it all seemed to work fine in Win I'd really rather not spend much money on this machine but a new USB card is not terribly expensive so I could live with that If it's more complicated I may be better served by a new machine Thanks

http://www.bleepingcomputer.com/forums/t/604974/rosewill-30-usb-card-causing-black-screen-in-win-10/
Relevancy 45.58%

For a recently quot inherited quot Dell Dimension win XP home Edition SP I bought a rosewill rx mv - enclosure? help compativility/rosewill Hard crive enclosure for a samsung sp n HDD it previously was the - help Hard crive compativility/rosewill enclosure? slave HD behind a Seagate baracuda G HD on an older system that was fast corrupting itself on Windows XP pro sp The enclosure appeared to be the best way to access the HD from the previous computer as the Dell has a Western Digital BB did have a bay for a second HD and a single connector pin cable only There is data only on the Samsumg music jpgs docs xls pdf and - help Hard crive compativility/rosewill enclosure? the like so I cannot reformat it The dell could recognize the Seagate HD but started to boot using that disc It once recognized the Samsung HD and wanted to reformat it Now it does not recognized the samsung HD in th rosewill enclosure Does being a slave in the old system cause problems when trying to access it in the new system The WD HDD has a pin jumper - the seagate and samsung - help Hard crive compativility/rosewill enclosure? have an pin jumper - issues - or pin settings Can the pin cable with only one connecter in the Dell be replaced with a dual connector and everything jumpered for cable select Are these HDD interfaces compatible Samsung PATA - - WD Ultra ATA and seagate SATA - or is that just a stupid question Or ---- help Bill nbsp

A:- help Hard crive compativility/rosewill enclosure?

There should be no issues using PATA and SATA in the same system.
Number of jumper pins makes no differece.
You can replace the single connector with a dual connector cable with no problems. You can either do it Master/Slave or CS should work as well.
 

http://www.techspot.com/community/topics/help-hard-crive-compativility-rosewill-enclosure.62684/
Relevancy 45.58%

Hi everyone,

I'm currently looking at this case for my new build. It seems like a nice cheap case for my build, but I'm worried about its size. I'm getting a GTX 570 which is 10.5 inches long and I've read a couple of reviews about people having trouble fitting shorter cards in there, but some reviews said that largers ones like the 570/580 could fit.

I'm just wondering if anyone had this case and could give me some insight on this. Currently this is the only thing stopping me from deciding on this case.

I was also looking at the Cooler Master HAF 922 which plenty of reviews say anything can fit in there, but its costs twice as much.

Thank you
 

A:Rosewill Challenger case size uncertainty

This case:
Antec 300
would serve you better. it is much sturdier than that Rosewill and ANY video card(s) will fit. I use this case so I know what I'm talking about. The price is great for the quality of this Antec!
 

http://www.techspot.com/community/topics/rosewill-challenger-case-size-uncertainty.166143/
Relevancy 45.15%

i just bought this card because my motherboard has only one ide port, and i have a lot of ide drives. so i connected 2 dvd drives to the ide port on the motherboard, and i want to run my 2 hard drives through the rc-212 card. it will work fine when i only have the master drive in, but then i plug the other in, which is set to cable select (it doesnt have a slave setting) and my pc then doesnt boot all the way to windows and it doesnt see the 2nd hard drive. any suggestions to get this working right?

im running asus m2n-e, amd athlon 64x2 4800 2,5 Ghz, 2 x 1 GB ram, evga nvidia 8800gts 320 MB, maxtor 200 and 160 GB ide hard drives.. thanks for any help!
 

A:rosewill rc-212 raid sata card trouble.. IGNORE!!!! SORRY

switched the retarded cables around and its fine...
 

https://forums.techguy.org/threads/rosewill-rc-212-raid-sata-card-trouble-ignore-sorry.621445/
Relevancy 45.15%

http://www.newegg.com/Product/Product.aspx?Item=N82E16817182200
tomshardware post I googled said it could, but to be more specific, I would be using a single 7850 at first but xfiring later on when 7850s are cheaper. They would be alongside a FX-8120 (or whatever similarly priced piledriver, when they come out) and a single basic HDD, with maybe an SDD later. Also 3 case fans (pretty insignificant) and the coolermaster hyper 212 plus. I wouldnt be PLANNING on overclocking a significant amount, but if I will be pushing the PSU just running 2GPUs/FX at stock, id probably go for a slightly higher specced one. just wanted some more opinions.
 

A:Can a Rosewill Green 630w power an HD 7850 in Crossfire?

I'd so stay away from pretty much any Rosewill product, no matter the price.
 

http://www.techspot.com/community/topics/can-a-rosewill-green-630w-power-an-hd-7850-in-crossfire.185321/
Relevancy 45.15%

Hey guys I recently built a new system and bought Rosewill clicking making Led flickering noises + PSU Light a quot Xtreme Series RX -S-B W Continuous C PLUS Certified ATX V v amp EPS V v SLI Ready CrossFire Ready Active PFC quot Compatible with Core i i quot Power supply This power supply has a little LED light Rosewill PSU Led Light flickering + making clicking noises inside of it Every once and a while it would randomly start flickering and making clicking noises upon each flicker The clicking is fairly loud and the flicker fairly bright no naturally I was concerned I contacted Rosewill and they sent me Rosewill PSU Led Light flickering + making clicking noises a replacement This new one hasn t been flickering or clicking until Today about weeks after I received it in the mail Surely a second PSU would not have the Rosewill PSU Led Light flickering + making clicking noises exact same symptoms as the first PSU I figured there must be something I am doing wrong Has anyone had this problem in the past System Specifications Windows Ultimate x AMD FX- -Core Processor ASUS Sabertooth FX R Bios Version G Kingston DDR Dual Channel Ram Nvidia GeForce GTX nbsp

A:Rosewill PSU Led Light flickering + making clicking noises

There isn't anything you can be doing wrong. If it's connected properly, the PC will work (which appears to be the case).

In general, Rosewill hardware is mediocre at best. In any case, it sounds like it's failing. Time to get a replacement.
 

https://forums.techguy.org/threads/rosewill-psu-led-light-flickering-making-clicking-noises.1104423/
Relevancy 45.15%

Hey everyone i'm having a real problem with my Wireless N adapter working I have had this working before but took it out of my PC months ago Now i would like to put it back in and use it some more but I Triangle Rosewill N Yellow Trouble Adapter Wireless have that dreaded yellow exclamation point triangle in my device manager when i use update driver it says the most up to date driver is installed I remember getting an error that also said something like quot unable to use device because windows could not load the drivers quot etc i have PCIpnp selected as yes in my bios if that makes a difference the light onthe back of the wireless card is not on at this point here is the card Newegg com - Rosewill RNX-N PC amp RNWD- amp IEEE b amp g amp n PCI Wireless-N Adapter amp T R amp Up to Mbps Data Rates amp amp -bit WEP Rosewill Wireless N Adapter Yellow Triangle Trouble complies Rosewill Wireless N Adapter Yellow Triangle Trouble with WPA amp WPA standard amp TKIP amp AES amp Shared Key Authen see attached pics for the exact errors anyone Rosewill Wireless N Adapter Yellow Triangle Trouble have any ideas Operating System Windows bit Mobo ASUS M A XTD EVO AM AMD X ATX AMD Motherboard Processor AMD Phenom II X Black Edition Deneb GHz Socket AM W Quad-Core Processor HDZ FBGIBOX Video Card Crossfired SAPPHIRE Vapor-X VXSR Radeon HD GB -bit GDDR PCI Express x Ram Gb of G SKILL Ripjaws Series -Pin DDR SDRAM DDR PC

Relevancy 45.15%

Aloha,
I just received my Rosewill External case RX30-U2FAB that I bought from NewEgg and it did not come with an installation CD that contains the drivers. I installed a Maxtor Ultra series 100G ,7200rpm hdd and my OS is Win98se. I am using a usb 1.1 and my computer will not recognize the hdd. I tried downloading the driver Rx30-u2FA_fab.zip from the Rosewill site and my computer wizard does not recognize the driver. When I plug in the usb plug from the external drive, it comes up saying that the wizard has discovered a new device, atapi-6 bridge controller but it cannot locate the driver. It installs it in the device manager as other device and has a yellow question mark. Where can I get a driver for the ATAPI-6 bridge controller? TIA

Mahalo,
doogdoog
 

Relevancy 45.15%

hey i have two machines, one is a windows 7 64bit, and the other is windows 7 enterprise 32 bit.

both machines will not allow me to use my hdd, by esata or USB 2.0.
i keep getting this in device manager

i really need a solution to this.

my desktop is the more important one. it is in AHCII mode, and i have the drive plugged into to an external port, that is connected to the esata port on my Mobo

A:samsung hdd, in rosewill esata enclosure doesnt work

Have you tried turning the machine off, plugging the hard drive in and powering it on, then start the computer? Also, your C drive could use some more space.

http://www.sevenforums.com/hardware-devices/194123-samsung-hdd-rosewill-esata-enclosure-doesnt-work.html
Relevancy 44.72%

To start off I'll tell how it all happened First almost months ago I bought a PCI Card Wireless my PCI HD Rosewill Audio Broke N300 Realtek Wireless card from newegg it came in a week later and it was defective I returned it for a new Rosewill N300 PCI Wireless Card Broke my Realtek HD Audio one and got it another two weeks later Very slow shipping It was working but when I installed what was on the disk it came with my HD Audio Manager went wacky and said I was plugging in and out audio devices I just clicked OK on all of them So I got good speeds but I realized I hadn't any audio coming from my speakers The realtek HD audio was set to default playback device and both ports on the audio jack were securely in It simply wouldn't work A restart didn't fix it either So I uninstalled and reinstalled the drivers for the PCI Wireless card a couple of times restarting time after time just going through troubleshooting processes in hope that one would fix it So during the process after the first time of uninstalling I found the card defective again only giving Mb s download speed just as the first defective card Over the whole convoluted process I hadn't fixed my speakers my mouse drivers broke so I had to put it into a different port and I have another defective PCI wireless card So my question is how would I fix my speakers The speakers are in my monitor and what it's usually named is Realtek HD Audio or something but now it's named High Definition Audio Device Are there any fixes I can try Or is more information needed Thanks

A:Rosewill N300 PCI Wireless Card Broke my Realtek HD Audio

High Definition Audio Device indicates that the generic basic function Windows installed audio drivers are installed instead of your RealTek.

Reinstall the RealTek, either from the installation disc that came with the motherboard or from the ASUS site for your specific model motherboard.

As far as the Rosewill PCI card, first you should be using a PCIe card, not a PCI as the PCI bus on most newer motherboards is a "bridge" to the PCIe bus and many PCI cards do not function correctly with the bridged PCI slot. Second, I would get something other than Rosewill, which tends to be a "cheaper" brand.

Another issue I see is two Antivirus programs. Having two programs, like you show (Microsoft Security Essentials and Avast) will conflict and can cause many problems. I, and all my clients, only use the Microsoft Security Essentials and Malwarebytes (for malware/spyware).

http://www.sevenforums.com/sound-audio/322600-rosewill-n300-pci-wireless-card-broke-my-realtek-hd-audio.html
Relevancy 40.85%

Keyboard is a Dell standard office.Unable to type anything or get into programs that need passwords.Have also tried another keyboard with the same result.I have used the Dell diagnostic program and the Microsoft program and came up with nothing.When I checked the drivers the result was the device driver was loaded successfully but can't find the hardware device (code 41).Is there a problem internally?I'm stuck and unable to get into programs that I need to get into.

I have one other thing that i'm not familiar with.McFee anti-virus each time it loads there is a box that says the activeshield needs to be re-installed.I don't know where to look for it or what it is or it's purpose.

Any help would be appreciative.

Thank you,
neverbeenhere

A:Keyboard Won't Operate

What can you tell us about your system - model number? age? When did the problem first occur?
How are you operating the system - with the mouse alone? Are the keyboard and mouse PS/2 or USB?
Is it possible you have the keyboard and mouse in the wrong ports? (Don't think It would boot like that but you never can tell)

Check the keyboard plug with a magnifying glass and look for bent pins - look at the socket to see if there is something jammed in one of the holes.

Look in the BIOS for any unusual settings relating to the keyboard such as "USB support for legacy keyboards" (or is that legacy support for USB keyboards?) or similar.
If they don't seem to apply to your particular system disable them.
(Edit - I just realised if your keyboard isn't working you won't be able to get into the BIOS - duh!)

hth

http://www.bleepingcomputer.com/forums/t/36877/keyboard-wont-operate/
Relevancy 40.85%

I am trying to log onto my internet banking and when I click on the log on the website just shuts down
 

A:java won't operate

Hi paulrobinson

See if your java is working with this test page..http://www.bodo.com/javame.htm
Also make sure you have your cookies enabled to view that site some on line banking require it. This is the only time I enable cookies.
 

https://forums.techguy.org/threads/java-wont-operate.202326/
Relevancy 40.85%

hi guys my computer seems to be infected with adware as i cannot access the internet Galore IE Pop - Cant operate Ups even on my laptop as i just get pounded with popups To the point that IE is completely Pop Ups Galore - Cant even operate IE unusable Due to this i havent been able to do the panda online scan etc as im currently just switching the required programs etc from a seperate computer i would really appreciate some help with this as its frustrating as hell My highjack log main Deckard's System Scanner v Run by chris on - - Computer is in Normal Mode -------------------------------------------------------------------------------- -- Last Restore Point s -- - - UTC - RP - Windows Update - - UTC - RP - Removed Command Pop Ups Galore - Cant even operate IE amp Conquer - - UTC - RP - Removed Java TM Update - - UTC - RP - Windows Defender Checkpoint - - UTC - RP - Scheduled Checkpoint -- First Restore Point -- - - UTC - RP - Windows Update Backed up registry hives Performed disk cleanup -- HijackThis run as chris exe ----------------------------------------------- Logfile of Trend Micro HijackThis v Scan saved at on Platform Windows Vista WinNT MSIE Internet Explorer v Boot mode Normal Running processes C Windows system Dwm exe C Windows Explorer EXE C Program Files Windows Defender MSASCui exe C Windows RtHDVCpl exe C Program Files Synaptics SynTP SynTPEnh exe C Acer Empowering Technology eDataSecurity eDSloader exe C Program Files HP HP Software Update hpwuSchd exe C Program Files Java jre bin jusched exe C Program Files Common Files Symantec Shared ccSvcHst exe C Program Files Microsoft Office Office GrooveMonitor exe C Windows ehome ehtray exe C Program Files Veoh Networks Veoh VeohClient exe C Windows System rundll exe C Windows System rundll exe C Windows System rundll exe C Program Files HP Digital Imaging bin hpqtra exe C Windows ehome ehmsas exe C Windows System rundll exe C Windows system taskeng exe C Acer Empowering Technology ENET ENMTRAY EXE C Acer Empowering Technology EPOWER EPOWER DMC EXE C Acer Empowering Technology ACER EMPOWERING FRAMEWORK SUPERVISOR EXE C Windows System mobsync exe C Acer Empowering Technology eRecovery ERAGENT EXE C Users chris AppData Local Temp RtkBtMnt exe C Windows System rundll exe C Program Files HP Digital Imaging bin hpqSTE exe C Users chris Desktop dss exe C Windows System rundll exe C Windows System rundll exe C Windows System rundll exe C Windows system SearchFilterHost exe c windows system rundll exe C PROGRA TRENDM HIJACK chris exe R - HKCU Software Microsoft Internet Explorer Main Start Page http www google co uk R - HKLM Software Microsoft Internet Explorer Main Default Page URL http en uk acer yahoo com R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http en uk acer yahoo com R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKCU Software Microsoft Internet Explorer SearchURL Default http uk rd yahoo com customize yco uk yahoo com R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName R - URLSearchHook Yahoo Toolbar - System Specs - no file O - Hosts localhost O - BHO HP Print Clips - System Specs - C Program Files HP Smart Web Printing hpswp framework dll O - BHO Adobe PDF Reader Link Helper - System Specs - C Program Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO NCO IE BHO - System Specs - C Program Files Common Files Symantec Shared coShared Browser coIEPlg dll O - BHO Symantec Intrusion Prevention - System Specs - C PROGRA COMMON SYMANT IDS IPSBHO dll O - BHO Groove GFS Browser Helper - System Specs - C Program Files Microsoft Office Office GrooveShellExtensions dll O - BHO SSVHelper Class - System Specs - C Program Files Java jre bin ssv ... Read more

Relevancy 40.85%

Hi i posted my pc specifications,as these last few weeks my pc started to be irritant as it seems that something is holding him to operate a bit fast,i do not have a fast pc but sometimes it will not obey my commands,as it looks stacked,scrolling a web page is slow,opening a new document seems searching ,it opens slowly,it is updated to everything,as i use filehippo,run cc cleaner,use malwarbytes and also superantyspyware,no viruses as far as i know,

what might be?dust?anything else?

Thanks

A:PC slow to operate

How much RAM are you utilizing? What OS is it on? And some virus programs and the like aren't tracked by any known virus removal tool. Check for weird entries in the RegEdit (ONLY DO THIS IF YOU'RE REALLY COMFORTABLE).

http://www.techsupportforum.com/forums/f217/pc-slow-to-operate-661822.html
Relevancy 40.85%

I recently purchased another 1tb sata hd so that I could use Raid 0 on my computer. All I did was install the HD, setup the raid, install windows, etc. I did not have to unplug or plug anything into the motherboard. Nothing is unplugged as far as the LED wires, but now I get no activity light while my computer is in operation. Any idea how to fix this?

Zach

A:Went Raid 0 - Now HD LED does not operate

Okay, super nooob. THe connection to the motherboard was off....Guess next time I would "double" check.

Zach

http://www.sevenforums.com/hardware-devices/92637-went-raid-0-now-hd-led-does-not-operate.html
Relevancy 40.85%

Presario 2800 is not operating on battery. Maybe I am not doing something correctly for the laptop to run on the battery. Anyway is there a way to check the battery to see if it is still good?
 

A:Won't operate on battery

you can buy an voltage meter for farely cheap and it a must for pc work starting @ 10-20$ish
 

https://forums.techguy.org/threads/wont-operate-on-battery.145108/
Relevancy 40.85%

Hi

I own a Canon Scanner Model Number FB630P. I recently had my hard drive replaced and having just tried my scanner it will not operate.

I have down loaded the latest software from the Canon site and installed it but still no success. When I try to scan I do get a noise coming from my scanner indicating something is happening but then it stops and I get the following Error Message. ' Communication Error. Error Number OXOOO80800' .

My scanner is connected to my printer port and there is no sign of a scanner in the Scanner section of the Control Panel

I run Windows ME and I have checked the connections relating to my scanner.

I would be grateful for any assistance but would emphasis I am quite a novice especially with relation to hardware, ports etc.
Many Thanks
 

https://forums.techguy.org/threads/my-scanner-will-not-operate.373415/
Relevancy 40.85%

I see that T mobile currently has a $50 unlimited 4g prepaid plan. This looks good to me, I'm only wondering if my 3g phone will operate on this network. Any advice?
Thanks
 

A:Can 3g phone operate on 4g?

A 3G phone will use the 3G network. The phone needs to be GSM compatible to work on T-Mobile's network.
 

https://forums.techguy.org/threads/can-3g-phone-operate-on-4g.1016067/
Relevancy 40.85%

Hey, I am trying to see if it is possible to operate two monitors (1 on laptop 1 on projector) independantly. IE run media player on one while showing a powerpoint on the projector, using the laptop monitor as control panel for both. I am not a complete novice but monitor operation is a bit of a mystery to me.

my laptop has aditional monitor port and I am in fact running both right now, but I cant seem to set it up where it will do what I want it to do.
 

A:operate 2 monitors off 1 cpu

As long as your machine can do it, on the laptop there should be a button with a computer icon and a screen icon. (Usually the F2 key i think) Holding Fn key and pressing that should go through the modes of LCD, external monitor or both.
 

https://forums.techguy.org/threads/operate-2-monitors-off-1-cpu.465205/
Relevancy 40.85%

I have run the repair disc only to get stuck when it asks me to hit "r" for repair. I have also chosen "last known good configuration". Windows begins to reboot and then returns me to the previous screen. Any ideas short of re-installing the entire operating system?
 

A:Windows XP won't operate.

What is the problem that you are trying to repair? What do you mean about getting stuck after pressing R for repair?
 

https://forums.techguy.org/threads/windows-xp-wont-operate.699071/
Relevancy 40.85%

Hi All
I have been using the same mb and cd with winxp pro for a long time. I did get win7 installed on a maxtor drive but the volume is too small. I have another drive that needs to be formatted. The problem is this---I can't get the Sony DRU510A OR the Plextor PX-712 to be recognized by the BIOS. both drives are set on CSEL, although I have tried both as slave with no positive results. I have tried "blanking" the BIOS, but with the same result. I also have tried different cables as well. For some reason, I seem to think that it is something simple, but I just cant seem to put my finger on it. There are several "pecularities" with Win7---maybe this is one of them. Thanks as always

bill in las cruces

A:Can't get CD to operate as slave

windows 7 will certainly not affect your bios (although some cracktivators might...)

we could also do with some more info to help you better - please be more specific with your motherboard details, for example.

also the sony and plextor drives you mention, these are the problem cd drives? or are they dvd? i assume they are ide? on the same cable?

http://www.sevenforums.com/installation-setup/19889-cant-get-cd-operate-slave.html
Relevancy 40.42%

I DON'T want to boot my PC off the HDD, but off my USB drive. In other words, I want that my PC is usable only only with my USB drive. For that, I understand I'll have to install Windows on my USB..am I right?

Also if I keep my personal files in another USB drive and attach both USBs (i.e. the bootable USB and "personal files" USB), then can I use my computer in this fashion, without relying at all on my HDD?

Please guide me on this step by step, I often get confused with abstract steps.

Thanks
 

A:How can I operate/boot my PC only through USB drive?

any reason why ?

You can use UBUNTU

------------------------------------------------------------------------

UBUNTU Virtual CD

If you have another PC with a cdwriter and spare CD
goto http://www.ubuntu.com/ and download the ISO http://www.ubuntu.com/desktop/get-ubuntu/download

YOu can also run from a USB device now - if the Machine supports booting off a USB Stick
http://www.ubuntu.com/desktop/get-ubuntu/download

full details are here (Note this is for version 9 - so the start up options are slightly different )
http://www.howtogeek.com/howto/wind...backup-files-from-your-dead-windows-computer/

click on the image "download ubuntu"
Select a location
then begin download
Save the file onto your PC – remember where you saved it – so you can find it again to create the image bootable CD.

You do NOT copy the ISO file onto a CD - you have to use the ISO to create a bootable CD
The CD creator software you have on the PC may have an option to create an image from an ISO
If not - use this free program http://www.imgburn.com/

When the UBUNTU CD boots - you will A screen - with Language on the left panel and two option images
== > Try ubuntu
== > Install ubuntu

You can try Ubuntu without making any changes to your computer, directly from this CD

Use OPTION 1 "Try ubunto without any change to your computer" ONLY this option this will run from the CD and not install onto your harddrive - be careful, if you do install onto the PC - you will wipe the data and software OFF your hard drive.., so repeat only use option 1

Now you should see a UBUNTU desktop

------------------------------------------------------------------------
 

https://forums.techguy.org/threads/how-can-i-operate-boot-my-pc-only-through-usb-drive.996686/
Relevancy 40.42%

My backup on Win7 pro wont operate and never has.
I click on "setup backup" and nothing happens.

I have checked and the windows backup service is running.

HELP

eatc7402

A:Backup wont operate

My suggestion is to use the backup used by many members here voluntarily as they consdier it even better than the native backup

Macrium Reflect
Macrium Reflect FREE Edition - Information and download

http://www.sevenforums.com/backup-restore/109561-backup-wont-operate.html
Relevancy 40.42%

There are several issues with my computer right now here i am disappointed famished and desperate for the aid of this forum - My monitor trips like it goes blank for - seconds randomly could be an hardware issue - My computer even though on SSD is slow at times - I had other hard drives and one of them was ancient and contained bad sectors so i have disconnected it which improved my PC but the two others one of them is relatively old and one is a brand new one what happens is my PC at times would crash and then PC fails to reboot from the SSD and accesses old drives for windows which have none therefore I cannot boot in to fails Window co-operate order to fix it I have to open my PC disconnect my hard drives so the only remaining Window fails to co-operate is SSD and restart my PC which where the boot actually happens and then i reconnect my other drives again this happens after every few days gt lt - Thirdly I am using a Samsung ' monitor and I do not know what is wrong with all of this i cannot enter bios it presents me with a blank screen so I cannot re-install windows too I have windows written on a USB drive too and it gives me a strange error that my drives are some other type whereas initially I have installed the windows from that very USB I spend decent money to get this pc made but help Also my start button isn't responding and quot My Computer quot doesn't appear on my desktop Quote - - -------- d-sh--w- C found - - -------- d-sh--w- C found - - -------- d-sh--w- C found - - -------- d-sh--w- C found Quote Event Viewer Messages From Past Week AM Error Service Control Manager - A timeout was reached milliseconds while waiting for the CharJi EVO RunOuc service to connect AM Error Service Control Manager - The CharJi EVO RunOuc service failed to start due to the following error The service did not respond to the start or control request in a timely fashion AM Error Service Control Manager - The WWAN AutoConfig service terminated with the following error Overlapped I O operation is in progress AM Error Service Control Manager - The Sync Host ebd service terminated unexpectedly It has done this time s The following corrective action will be taken in milliseconds Restart the service AM Error Service Control Manager - The Sync Host service terminated unexpectedly It has done this time s The following corrective action will be taken in milliseconds Restart the service AM Error Microsoft-Windows-DistributedCOM - The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID C F A - F - FA-B BB- A F and APPID CDED -E AE- B - - D DCC to the user abc-PC abc SID S- - - - - - - from address LocalHost Using LRPC running in the application container Microsoft Windows Cortana neutral neutral cw n h txyewy SID S- - - - - - - - - - This security permission can be modified using the Component Services administrative tool AM Error Microsoft-Windows-Kernel-General - Registry Hive Recovered Registry hive file ' SystemRoot System Config BBI' was corrupted and it has been recovered Some data might have been lost PM Error disk - The IO operation at logical block address x f b d for Disk PDO name Device failed due to a hardware error PM Error disk - The IO operation at logical block address x d for Disk PDO name Device failed due to a hardware error PM Error disk - The IO operation at logical block address x cc for Disk PDO name Device failed due to a hardware error AM Error disk - The IO operation at logical block address x e for Disk PDO name Device failed due to a hardware error AM Error disk - The IO operation at logical block address x f d for Disk PDO name Device failed due to a hardware error AM Error disk - The IO operation at logical block address x e for Disk PDO name Device failed due to a hardware error AM Error disk - The IO operation at logical block address x f c for Disk PDO name Device failed due to a hardware error AM Error disk - The IO operation at logical block a... Read more

http://www.techsupportforum.com/forums/f338/window-fails-to-co-operate-1111777.html
Relevancy 40.42%

Alright so about months ago a virus got me I currently had no protection because mine expired The virus made it so I couldn t do ANYTHING so I turned on computer turned it back on and somehow installed Norton and got rid of the virus The problem is that I am having difficulties operating since Obviously it is because of the virus Some of my system files are missing I cannnot double click on anything to make it run I have to right click and click quot Start quot When I go to my quot Control Panel quot Nothing in there works This is the problem It says C WINDOWS SYSTEM rundll exe Application Cannot Be Found That goes for Everything Therefore I can not uninstall many thing on my computer Another thing is that my computer sometimes sounds like it s going to explode or something but when I move the tower over an inch it calms down Anyway to fix either of these problems without having to go to a repair shop nbsp

A:Virus got me...difficult to operate.

Howdy,

Moving the tower and it calms down...sounds like something maybe loose .......I would check all connections

Is this a desktop and do you have the Operating System XP disc?
 

https://forums.techguy.org/threads/virus-got-me-difficult-to-operate.921782/
Relevancy 40.42%

Everyone on here seems so knowledgeable and my description of the problem may sound stupid Some kids were visiting and my origional pc is a XPS One of the kids had popped an old re-installation cd in and was overwriting I have installed XP and all the Dell accessories show they are running eventhough I can t access any of them THere is no longer system restore check environment the Mcafee program is gone and can t be re-installed From Outlook Express I can t go to most sites that have been linked All the items are utilities not operate Dell will on the computer but Dell utilities will not operate I can t retrieve them to the proper partition Dell says I have to have some type of disk which they will mail On a side note I noticed they doublebilled me and I am in a dispute with them over that I also get a message that says Internall Error when I try to launch the set-up wizard I suspect they are saying I have to re-install XPS and start from there Hope this makes sense to someone The Dell tech couldn t log in to my pc He spoke broken English so I really couldn t understand much of what he said

A:Dell utilities will not operate

A bit more of information the system launcher wizard will activate. Then afer the Dell support system and accessories partially load a yellow box comes up saying Internal Error 2937

http://www.bleepingcomputer.com/forums/t/197865/dell-utilities-will-not-operate/
Relevancy 40.42%

I've noticed a huge decrease in the performance of Firefox. I know that people are experiencing crashes and what-not, which I (knock on wood) have not yet. But I have definitely experienced a major decrease in speed, to start up and loading between pages.

Are there known issues with Firefox? I never had issues with Firefox in Vistax64. Any ideas?

A:Firefox Slow to Operate???

I am not having any issues on Win 7 32 bit. It is snappy.

Have you upgraded to Firefox 3.5.4?

Do you have a bunch of extensions and how does it perform with the extensions turned off?

http://www.sevenforums.com/browsers-mail/35227-firefox-slow-operate.html
Relevancy 40.42%

I have several programs that won t load or freeze when trying to load I thnik it is either virus related or I amy have a or won't Log Programs operate load - HJT corupt file Attached is a HJT log Any help is appreciated Thanks Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows SP WinNT MSIE Internet Explorer v SP Boot mode Normal Running processes C WINNT System smss exe C WINNT system winlogon exe C WINNT system services exe C WINNT system lsass exe C Programs won't load or operate - HJT Log WINNT system svchost exe C WINNT system spoolsv exe C Program Files Intel ASF Agent ASFAgent exe C Program Files Grisoft AVG Anti-Spyware guard exe C Program Files Kaspersky Lab Programs won't load or operate - HJT Log Kaspersky Anti-Virus avp exe C WINNT System svchost exe C Program Files Citrix GoToMyPC g svc exe C Program Files Common Files Motive McciCMService exe C Program Files Citrix GoToMyPC g comm exe C Program Files Citrix GoToMyPC g pre exe C Program Files RDS RsiSvc exe C WINNT Explorer EXE C WINNT system MSTask exe C WINNT System tcpsvcs exe C WINNT System snmp exe C WINNT system stisvc exe C WINNT System WBEM WinMgmt exe C WINNT system mspmspsv exe C WINNT system svchost exe C Program Files QuickTime qttask exe C Program Files Java jre bin jusched exe C Program Files Kaspersky Lab Kaspersky Anti-Virus avp exe C Program Files HughesNetTools McciTrayApp SSR exe C Program Files OpenOffice org program soffice exe C Program Files OpenOffice org program soffice BIN C PROGRA HUGHES bin McciBrowser exe C Program Files Common Files Motive McciContextHookSvc SSR exe C WINNT system wuauclt exe C WINNT system svchost exe C Program Files Grisoft AVG Anti-Spyware avgas exe C Program Files Internet Explorer IEXPLORE EXE C Program Files Grisoft AVG Anti-Spyware avgas exe C Program Files Grisoft AVG Anti-Spyware avgas exe C Program Files Grisoft AVG Anti-Spyware avgas exe C Documents and Settings Administrator My Documents New Downloads HiJackThis exe R - HKCU Software Microsoft Internet Explorer Main Start Page http www foxnews com R - URLSearchHook Yahoo Toolbar - EF BD -C FB- D - F- D F - no file O - BHO no name - a b -fb c- a -b f- b feff b - C WINNT system tylvffur dll file missing O - BHO no name - bb f f -d cf- d -b f -e a a - C WINNT system kxbvyoof dll file missing O - BHO Google Web Accelerator Helper - A B D-DE - - - BA C C - C Program Files Google Web Accelerator GoogleWebAccToolbar dll O - BHO no name - e f -c - da- fad- c aa - C WINNT system sjgleevw dll file missing O - BHO SSVHelper Class - BB-D F - C-B EB-D DAF D D - C Program Files Java jre bin ssv dll O - BHO Google Toolbar Helper - AA ED - DD- d - -CF F - c program files google googletoolbar dll O - BHO Google Toolbar Notifier BHO - AF DE - D - -B FA-CE B AD D - C Program Files Google GoogleToolbarNotifier swg dll O - BHO no name - D BD B- - C -B -A CD - C Program Files Video Add-on isfmdl dll file missing O - Toolbar Google Web Accelerator - DB BFA -A E - E- E A-C D CBF - C Program Files Google Web Accelerator GoogleWebAccToolbar dll O - Toolbar amp Google - C B - - d - B - A CD F - c program files google googletoolbar dll O - HKLM Run Synchronization Manager mobsync exe logon O - HKLM Run Start Outpost C New Downloads Lavasoft Personal Firewall Setup exe O - HKLM Run QuickTime Task quot C Program Files QuickTime qttask exe quot -atboottime O - HKLM Run SunJavaUpdateSched quot C Program Files Java jre bin jusched exe quot O - HKLM Run RoxWatchTray quot C Program Files Common Files Roxio Shared SharedCOM RoxWatchTray exe quot O - HKLM Run AVP quot C Program Files Kaspersky Lab Kaspersky Anti-Virus avp exe quot O - HKLM Run d rundll exe quot C WINNT system blhjxkyo dll quot b O - HKLM Run SBCSTray C Program Files Sunbelt Software CounterSpy SBCSTray exe O - HKLM Run HughesNetTools McciTrayApp C Program Files HughesNetTools McciTrayApp SSR exe O - HKLM Run GoToMyPC quot C Program Files Citrix GoToMyPC g svc exe quot -logon O - HKCU Run MsnMsgr quot C P... Read more

Relevancy 40.42%

I have a Acer ES!-511 with its' original power cord.  It charges the battery just fine.  When battery gets below 10%, and I plug in the cord, I get the "ACER" logo screen, but then it goes black.  It will not run on just AC power. Please Help?

A:My ES-5111 will charge, but will not operate on AC...

You need to test the power supply. It should be putting out 19 volts, but that's a guess as your model number isn't correct.ES1-111? 19volts, 40 watts.http://www.atbatt.com/laptop-chargers/how-to-test-laptop-adapter

http://community.acer.com/t5/E-and-M-Series-Laptops/My-ES-5111-will-charge-but-will-not-operate-on-AC-power-Help/td-p/426946/jump-to/first-unread-message
Relevancy 40.42%

My computer is not recognizing my typed command to enter the BIOUS menu during startup. I've tried both wired and wireless keyboards but it doesn't recognize any commands given. Any ideas?
 

A:Can't operate my BIOS menu

It'll recognise the right one but the problem is this varies between different computer makes and motherboards. There are a lot of possibilities. Try Googling for example - key for bios (Acer). If no joy post back details of the computer model and no doubt someone will be able to suggest the correct key or combination of keys.
 

http://www.techspot.com/community/topics/cant-operate-my-bios-menu.190552/
Relevancy 40.42%

I have hp pavilion 13-b219tu i3 laptop with window 10 64 bit.Last week while i was doing my work on it the chrome was gone too slow to open any window. I thought that chrome has become corrupted so i reinstall it but the problem was same and then my laptop gone too slow and become hardly to  do any work and take more than enough time wake up or shut down .Then i reset my Laptop thinking that it might help but the reset take 6 hours to complete and when it was done the problem was same .so if any suggestion you have please recommend so that i might continue my work.

A:Performance too Slow to be operate

Hi!, @Taimoor_Riaz: Welcome, to Forum !. You've tried, give you a clean, temporary data?. Often, it is the solution. Remember, that there are files left by others (.tmp) and slow, your computer.

http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Performance-too-Slow-to-be-operate/td-p/5587443
Relevancy 40.42%

Hi: I picked up a PC to do some work on a website. It came with XP Pro. Well, it crashed, so I reinstalled the software but it's XP Home Edition. Ever since I did this, Internet Explorer and the system does not understand my Ethernet Connection. If I go into devices, Ethernet shows the yellow question mark and exclamation mark. It keeps saying no drivers installed??? I connect directly from my cable provider - so I can't figure out what to do.

I am om my Mac now, and obviously I'm on line. So I know it's not my cable. And before the system crashed, I had downloaded Firefox - which ran great. But since the reinstallation, all that's there is I.E. Ugh!

Do I need to purchase a full version of XP Professional to get this thing to work?

Please help!

Thanks,
 

A:Can't Get Explorer to Operate on XP Home Ed

FelilneReader said:


Hi: I picked up a PC to do some work on a website. It came with XP Pro. Well, it crashed, so I reinstalled the software but it's XP Home Edition. Ever since I did this, Internet Explorer and the system does not understand my Ethernet Connection. If I go into devices, Ethernet shows the yellow question mark and exclamation mark. It keeps saying no drivers installed??? I connect directly from my cable provider - so I can't figure out what to do.

I am om my Mac now, and obviously I'm on line. So I know it's not my cable. And before the system crashed, I had downloaded Firefox - which ran great. But since the reinstallation, all that's there is I.E. Ugh!

Do I need to purchase a full version of XP Professional to get this thing to work?

Please help!

Thanks,Click to expand...
No - you need to use your Mac to go to http://www.majorgeeks.com to download Everest Home - and only that. Install it on your flawed system and take the information in the summary to find the name of the maker of your network connector. It might be Realtek, Broadcom or Intel but you do need to get the right name to be able to find the driver at the maker's website. I doubt that's the only yellow mark in Device Manager but once you download the driver to your Mac and ship it across on a memory stick, the network will complete and you can get the other drivers online.
 

https://forums.techguy.org/threads/cant-get-explorer-to-operate-on-xp-home-ed.875532/
Relevancy 40.42%

Ok, here's the thing: I was on late one night last week surfing, and I got 3 different warnings of trojan horses. My automatic reaction was that they were those fake spyware and virus program popups that you sometimes get online. This may in fact be the dumbest thing I have ever done! I shut down all 3 warnings, and went about things normally. The next time I ran Avast Pro, I get those warnings again. I vaulted all that showed up, but I still don't feel safe. I don't know if a HijackThis log will help, but I thought it was worth a shot. It seemed the right thing to do to post a topic explaining myself before I posted the log, so here it is. Let me know if I can go ahead with the hjt log. Thanks guys..

A:Don't operate pc when half asleep!

ChancemanLet's check a few things first and then decide whether you need to post in the HJT forumDo not post a HJT log in this forumPlease download ATF Cleaner by Atribune & save it to your desktop.Double-click ATF-Cleaner.exe to run the program.Under Main "Select Files to Delete" choose: Select All.Click the Empty Selected button.If you use Firefox browser click Firefox at the top and choose: Select AllClick the Empty Selected button.
If you would like to keep your saved passwords, please click No at the prompt.If you use Opera browser click Opera at the top and choose: Select AllClick the Empty Selected button.
If you would like to keep your saved passwords, please click No at the prompt.Click Exit on the Main menu to close the program.Note: On Vista, "Windows Temp" is disabled. To empty "Windows Temp" ATF-Cleaner must be "Run as an Administrator".Please download Malwarebytes Anti-Malware (v1.34) and save it to your desktop.alternate download link 1alternate download link 2If you have a previous version of MBAM, remove it via Add/Remove Programs and download a fresh copy.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install. Alternatively, you can update through MBAM's interface from a clean computer, copy the definitions (rules.ref) located in C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware from that system to a usb stick or CD and then copy it to the infected machine.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue with the removal process.Back at the main Scanner screen:Click on the Show Results button to see a list of any malware that was found.Make sure that everything is checked, and click Remove Selected.When removal is completed, a log report will open in Notepad.The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.Copy and paste the contents of that report in your next reply and exit MBAM.Note: If MBAM encounters a file that is difficult to remove, you may be asked to reboot your computer so it can proceed with the disinfection process. Regardless if prompted to restart the computer or not, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware. MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you after scanning with MBAM. Please temporarily disable such programs or permit them to allow the changes.http://www.bleepingcomputer.com/forums/t/114351/how-to-temporarily-disable-your-anti-virus-firewall-and-anti-malware-programs/

http://www.bleepingcomputer.com/forums/t/208086/dont-operate-pc-when-half-asleep/
Relevancy 40.42%

Hello All Just recently at some point a load of viruses entered my Windows All Operate To Fail Programs XP laptop system and have been wreaking havoc ever since I have been trying to cope with trojans and programs like quot spools exe quot and as much as I try to remove it I am completely unable to even when I reach the source file and it appears to be moved to the All Programs Fail To Operate recycle bin and finally deleted I still have another one quot spoolsv exe quot A different virus locked my task manger as well as my system commands but I was able to fix the registry value after unlocking the registry editor though I cannot remember the full process right now To stay on track with current issues however it would seem now that every All Programs Fail To Operate single one of my programs has had its All Programs Fail To Operate registry changed For everything from Fireworks MX to Microsoft Works and even Mozilla Firefox I receive the message quot Choose the program you want to use to open this file quot and beneath that is the word quot File quot and then the name of he program I am trying to access The only problem is though that this includes such things as when I am trying to use quot ping quot or quot cmd quot and most of all quot regedit quot I receive the same message every single time regardless of the source Furthermore safe mode does nothing to fix this problem ending quot explorer exe quot does nothing and when I download new software to fight off any viruses the programs are unable to function start up because I receive the same message as before quot Choose the program you want to use to open this file quot If anybody at all has any clues or leads I could follow to fix this problem I would be endlessly grateful I do not know very much about computers as I just turned but I have tried all that I do know as well as searched for symptoms and solutions to my problems and my situation seems extremely unique Once again please help me in any way you are able to and thank you to all of those that do nbsp

A:All Programs Fail To Operate

Also, if there is anything you need me to add to this, please just tell me. I said everything that I thought had influence on the dilemma, but I may have left out crucial information unknowingly. I'll do what I can to provide anything you need.
 

https://forums.techguy.org/threads/all-programs-fail-to-operate.708883/
Relevancy 40.42%

If anyone is familiar with a "virtual desktop" program called Dexpot, could you give me a quick run through on how to use it. I think it would be very handy, but can't seem to figure out how to use it. It doesn't seem to have any help files and everything I find at their website except the initial index page are in a foreign language that I don't know. What I am trying to do, but can't seem to, is to have different shortcut icons on each desktop according to what I am doing on that particular desktop. Can this be done, or do all of them have to show the same icons as they do now?

Thanks for any help.
Peg
 

Relevancy 40.42%

I keep getting variations of W32 virus everyday and would like to block.

Trying to install mailwasher but when loads, it seems to use my access to server and password rather than actual e-mail address.

I get error message: autentication for account Personal(mail....)
Bad userid or password and
Servor login popsup

Any way to rectify:

Thanks,

Frank
 

Relevancy 40.42%

Hi Guys.I have some bizarre question.
i am going to move from Belgium to Bulgaria.
Is there some software to access my computer in Begium from my computer in Bulgaria ?
Thanks for your help
icy

A:How can I operate another computer in another country ?

Yes you can. But you will have to have the computer back home on. TeamViewer I use it all the time and it is good and free.

TeamViewer - Free Remote Control, Remote Access & Online Meetings

http://www.sevenforums.com/network-sharing/285730-how-can-i-operate-another-computer-another-country.html
Relevancy 40.42%

I checked out my device manager and there are no yellow question marks.
My audio information says the device is working properly.
When I put a cd inside,it runs,and Media player reads it is in there,but there is no sound.
I have sound from things I have ripped from my cds,and when I installed the burner,my computer recognised it.
I have software to burn my music,and it seemed to be going through the motions,but basically it doesn't work.
Through my research I came across info that this particular burner doesn't need drivers.
My computer is a Dell Optiplex GX260.
Dear God ,what am I doing wrong?What am I missing,please help me.I've been researching this for five days now.

A:Gateway HL-DT- ST RW/DVD GCC-4480B won't operate

Initial checks are to right click that device in Control Panel and c;ick properties, then properties again and ensure digital audio is checked and volume is full.

Then, click the volume icon in the Task bar and select CD player and make sure the volume is up there too.

http://www.techsupportforum.com/forums/f10/gateway-hl-dt-st-rw-dvd-gcc-4480b-wont-operate-375091.html
Relevancy 40.42%

Howdy everyone!

First a list of all those involved:

AOL 9.0 SE
IE 7
cable broadband connection
AOL is default browser
Scenario:

I open AOL. The window opens and it prompts asking for the password. I enter password.

AOL runs, gives the "You have mail" prompt, runs AIM and then one of two things happens.

1- AOL loads the usual (in my case) "Welcome" window with the little menu bar to the left, and

then IE prompts to connect to the internet when I go to another page or site, or

2- IE prompt to connect immediately. In this case, the "Welcome" window does not appear. If I

connect it takes me to AOL.com

In either case IE does not open, but is online. If I opt not to connect with IE, I can't use the internet

with AOL.

Thanks in advance,

Hermez

A:Aol Won't Operate W/o Internet Explorer

I just wanted to add that I use Windows xp SP2 and that I have updated it and all other applications.

I have also been through the process of cleaning viruses from my PC with a member on here named CreteMonster.

CreteMonster was a tremendous help.

Thank you, everyone who bothers to read this,

Hermez

http://www.bleepingcomputer.com/forums/t/113649/aol-wont-operate-wo-internet-explorer/
Relevancy 40.42%

When I bought this laptop a few months ago, the salesperson advised removing the battery when operating with cord plugged in. She said it would cut down on the heat generated.  I wonder if this is advisable.  If I remove the battery, I'll lose whatever I'm working on.  I have noticed that it gets warm, but not terribly so, and inconveniently, the vents are on the same side as the mouse. Where I live, it's not unusual for the power to flash off for a second or two if a storm is coming.  We have most of our serious electronics plugged into backup batteries, just for that purpose.  Unfortunately, we don't have one for the laptop yet. I wonder if anyone out there has thoughts on this issue?  I would appreciate the feedback.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Operate-notebook-without-battery/td-p/5673034
Relevancy 40.42%

I switched my pc on this morning and began to browse. FF (35.0.1) has totally refused to open (blank screen). I click on something and get the Does Not Respond flash across the top.

I opened pale moon (same drivers) and it works as does IE11

Any thoughts gents?

Now this:

Well, this is embarrassing.

Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.

You can try:

Removing one or more tabs that you think may be causing the problem
Starting an entirely new browsing session
makes no difference - same blank page

totally removed FF and rebooted - pc running perfectly but did get a malfunction message about a script in home page (nasa.gov) in FF before I removed it. Running this in pale moon, no problem so far.

Ran NASA site in pale moon, a 'little' bit slow, but worked perfectly and no script error notice.

A:Firefox Wont Operate

The same thing happened with Pale Moon this morning, refused to run. Then I realised, deleted pale moon x 32; install pale moon x 64 and its perfect. They do not make a FF x 64 and say they have no intention of doing so, so it appears to conflict in a 64 system. Using Nightly, the 64 version of FF is no use, its been made for developers only and not public use. Mozilla state on their site it should not be used in our machines.

Pale Moon 64 is running now and very fast too - one question, I have to use the backspace to return PM to a previous screen, where is the 'back' switch in PM?

http://www.eightforums.com/browsers-mail/61277-firefox-wont-operate.html
Relevancy 40.42%

Computer games and just the computer in general often run real slow and more recently my IE won't work DDS Ver - - - NTFSx Run by John at on Slow won't IE Computer operate and Fri Internet Explorer Microsoft Windows XP Home Edition GMT - Running Processes C WINDOWS system svchost -k DcomLaunch svchost exe C WINDOWS System svchost exe -k Slow Computer and IE won't operate netsvcs svchost exe svchost exe C WINDOWS system spoolsv exe svchost exe C Program Files Common Slow Computer and IE won't operate Files Slow Computer and IE won't operate Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Common Files Microsoft Shared VS DEBUG MDM EXE C WINDOWS system nvsvc exe C WINDOWS system svchost exe -k imgsvc C Program Files Viewpoint Common ViewpointService exe C WINDOWS Explorer EXE C WINDOWS CTHELPER EXE C WINDOWS system ctfmon exe C Program Files Microsoft ActiveSync wcescomm exe C Program Files AIM aim exe C PROGRA MI AA rapimgr exe C Program Files Registry Mechanic RegMech exe C Program Files Logitech MouseWare system em exec exe C Program Files SUPERAntiSpyware SUPERAntiSpyware exe C Program Files Spybot - Search amp Destroy TeaTimer exe C Documents and Settings John Local Settings Application Data Google Update GoogleUpdate exe C Program Files Viewpoint Viewpoint Manager ViewMgr exe C Program Files Mozilla Firefox firefox exe C Program Files Ventrilo Ventrilo exe C Documents and Settings John Desktop gmer exe C Documents and Settings John Desktop dds scr Pseudo HJT Report uStart Page hxxp www google com uDefault Search URL hxxp www google com uSearch Page hxxp www google com uSearch Bar hxxp www google com ie uSearchMigratedDefaultURL hxxp www google com uWindow Title Microsoft Internet Explorer powered by RCN mStart Page hxxp www google com mWindow Title Microsoft Internet Explorer powered by RCN mDefault Search URL hxxp www google com ie mSearch Page hxxp www google com mSearch Bar hxxp www google com mSearchMigratedDefaultURL hxxp www google com uInternet Settings ProxyOverride local lt local gt uInternet Settings ProxyServer http localhost uSearchAssistant hxxp www google com uSearchURL Default hxxp my netzero net s search r minisearch mSearchURL hxxp www google com mSearchAssistant hxxp www google com uURLSearchHooks AOLSearchHook Class eb ea-e be- cfd- f f-c a c eafa - c program files aim search AOLSearch dll uURLSearchHooks Yahoo Toolbar ef bd -c fb- d - f- d f - mWinlogon SFCDisable - xffffff d BHO Spybot-S amp D IE Protection - f - d - - d f - c progra spybot - search amp destroy SDHelper dll BHO A A -BACC- D - - A E E - No File BHO AD - D - -AC -CF DFBA C - No File TB Adobe PDF -d c - - fa - e eaac - c program files adobe acrobat acrobat AcroIEFavClient dll TB A A -BACC- D - - A E E - No File TB E BACF - E - E - - D E - No File TB E BD F- B D- E- CB -AB BB AAE - No File TB Yahoo Toolbar ef bd -c fb- d - f- d f - EB Adobe PDF ec be- - c -a -beb d a b - c program files adobe acrobat acrobat AcroIEFavClient dll uRun ctfmon exe c windows system ctfmon exe uRun H PC Connection Agent quot c program files microsoft activesync wcescomm exe quot uRun AIM c program files aim aim exe -cnetwait odl uRun RegistryMechanic c program files registry mechanic RegMech exe H uRun SUPERAntiSpyware c program files superantispyware SUPERAntiSpyware exe uRun SpybotSD TeaTimer c program files spybot - search amp destroy TeaTimer exe uRun ares quot c program files ares Ares exe quot -h uRun dll dll uRun Google Update quot c documents and settings john local settings application data google update GoogleUpdate exe quot c mRun CTHelper CTHELPER EXE mRun Logitech Utility Logi MwX Exe mRun lt NO NAME gt mRun MSConfig c windows pchealth helpctr binaries MSConfig exe auto mRun NvCplDaemon RUNDLL EXE c windows system NvCpl dll NvStartup StartupFolder c docume john startm programs startup raptr lnk - c progra raptr RaptrStub exe uPolicies-explorer ForceClassicControlPanel x uPolicies-explorer HideClock x mPolicies-explorer No... Read more

A:Slow Computer and IE won't operate

Hello and welcome to TSF.

One or more of the identified infections is a backdoor trojan.

This type of infection allows hackers to remotely control your computer, steal critical system information and download and execute files without your knowledge.

If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please get to a known clean computer and change all passwords where applicable, and it would be wise to contact those same financial institutions to apprise them of your situation.

You can read this: How Do I Handle Possible Identify Theft, Internet Fraud and CC Fraud?

===========================

Please download ComboFix from one of these locations:

Link 1
Link 2
Link 3

* IMPORTANT !!! Save ComboFix.exe to your Desktop
Double click on ComboFix.exe & follow the prompts.
As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.
Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.
**Please note: If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.




Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:


[*]Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools

Click on Yes, to continue scanning for malware.

# Your desktop may go blank. This is normal. It will return when ComboFix is done. ComboFix may reboot your machine. This is normal.

Note:
Do not mouseclick combofix's window whilst it's running. That may cause it to stall.

When finished, it shall produce a log for you. Please include the C:\ComboFix.txt in your next reply.
-----------------------------------
Note: Please make sure that your AntiVirus and AntiSpyware applications are re-enabled. A reboot should have done this.

http://www.techsupportforum.com/forums/f284/slow-computer-and-ie-wont-operate-367779.html
Relevancy 40.42%

Please I need help desperately I think my problem started when I recieved a Windows update Not sure but best I can remember I run win me When it boots up it acknowledges the CD-ROM but it will not run It always says insert cd I have tried everything I can think of and all the suggestions you guys have had posted This is a M -SIS A USD X Built-in Solo Built-in VGA USRobotic - Windows Bundled MS Value Pack Processor megahertz AMD K - w DNow kilobyte primary memory catch kilobyte secondary memory catch not the things suggested will have other tried all CD-ROM operate Drives Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive CD-ROM will not operate have tried all the other things suggested Free Space ATAPI CDROM CDROM DRIVE Generic IDE hard disk drive GB CONTROLLERS Standard Floppy Disk Controller Standard Floppy Disk Controller Primary IDE Controller dual Fifo Secondary IDE Controller Dual fifo SIS Dual PCI IDE Controller BUS Adapters SIS PCI to USB OPEN HOST CONTROLLER do not use Communications US Robotics Win INT modem Main Circuit board Biostar Group M SAA x BIOS Award Software International Inc CD-ROM will not operate have tried all the other things suggested PG Memory Modules megabytes insatlled memory Local Drive Volumes con drive GB GB free I have more CD-ROM will not operate have tried all the other things suggested info if needed but know this is alot This is the readout since the mess up I know this is alot but please I would appreciate any help at all fibrofilly nbsp

Relevancy 39.99%

Ive used Zone Alarm on a previous system so i decided to install it on my present system but doing so caused me major hiccups. the system was unable to operate properly and would automatically restart within 2-3 minutes. realizing i had not disabled Windows Firewall, i did so. that helped but even then zonealarm would not be acive and demanded system reboot. i finally decided to get rid of zonealarm so i unistalled it and reactiviated windows firewall. what am i doing wrong?? is it possible for me to install zonealarm without my pc going haywire?
 

https://forums.techguy.org/threads/computer-unable-to-operate-zonealarm.732587/
Relevancy 39.99%

c:\windows\minidump\030115-1037-01.dmp
c:\windows\memory.dmp
c:\users\user\appdata\local\temp\WER-37674-0.sysdata.xml

I keep getting these errors when I am trying to use Steam. It all started when I downloaded a driver for MotionJoy, my PC started crashing while in-game in Counter-Strike: Global Offensive. I reset my computer to factory settings, not once but twice. The error still occurs, if I open Steam it will stay open for a few moments/minutes and then my PC will crash giving this error on the exit.... IRQL_NOT_LESS_OR_EQUAL also it has thrown a PFN_List_Corrupt

Then when the computer restarts it shows the errors listed above to be sent to Microsoft. Any help with this issue would be greatly appreciated, I have 2 big upcoming matches this week and will not be able to attend if I cant even keep my PC running..... thanks in advance!!!!!!

A:BSOD with error while trying to operate in Steam

New update: Not only crashes with steam open but may just crash while idling on the desktop or with googe chrome open. Pretty much it just crashes when ever it feels like it and throws a different error on exit but always the same ones to send to microsoft.

http://www.eightforums.com/bsod-crashes-debugging/62365-bsod-error-while-trying-operate-steam.html
Relevancy 39.99%

Hello my friends,
after AVAST Security pop up this ''found rootkit'' and then removed it.
I use then  Malwarebytes and Super antisyware and find about 45 infections and removed them to.
 
After scaning again this programms say's  ''no infections found''.
 
 
The last scan I make was with Rootkitbuster this programm say's it founds
 
different system hooks like
 
zwCreate mutand...hooked by c:windows system 32...
 
zwCreattimer...dublicate...and so on.
 
About 25 logs without to fix. It can't fix it say.
 
Are this serious threat or something else?
 
Thank you

A:RootkitBuster-Operate system Hook- zw...

Hi there,my name is Marius and I will be assisting you with your Malware related problems.Before we move on, please read the following points carefully. First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding. Perform everything in the correct order. Sometimes one step requires the previous one. If you have any problems while you are follow my instructions, Stop there and tell me the exact nature of your problem. Do not run any other scans without instruction or Add/ Remove Software unless I tell you to do so. This would change the output of our tools and could be confusing for me. Post all Logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts. If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed. Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean. My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.   You told us that you removed several items with Malwarebytes´ Antimalware. This tool creates a log on every run and we need to see them.The logs can be found here:
C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\log-date.txtOr at C:\Program Files\Malwarebytes' Anti-Malware\Logs\log-date.txtZip any and all of these logs and attach the file to your next reply.

http://www.bleepingcomputer.com/forums/t/507899/rootkitbuster-operate-system-hook-zw/
Relevancy 39.99%

My problem is that my screen saver will not operate at all no matter - saver issue operate USB possible Screen won't what settings I use It does work when I use the 'preview' function though I am running Windows x It's updated to the fullest extent via Windows Update My mobo is a Gigabyte X -UD running F Bios the latest version My screen saver is set to blank screen after minute just for testing it's normally set to minutes and used to work perfectly in the past I can't honestly remember Screen saver won't operate - possible USB issue when it stopped working as I am usually at the computer so have no need of it All my displays are set to turn off after minutes three Dell U quot WS monitors my computer is set to Screen saver won't operate - possible USB issue never sleep and hard drive set to never turn off Kingston SSD as C drive Allow wake timers set to disabled USB selective suspend setting set to disabled I am using a Wireless Logitech G s mouse and wired Logitech G keyboard I mention this as my research has said that this could be the cause However I Screen saver won't operate - possible USB issue have removed and uninstalled the keyboard and mouse and this hasn't rectified my problem I am using hte latest drivers for both downloaded and installed from the manufacturers website today My Powercfg energy report highlighted the issue for me I think and I list them below My problem is that I have no idea how to fix these errors so any help would be really gratefully received please For reference my Device Manager is saying that I have three Generic USB Hubs four USB Composite Devices one USB Mass Storage Device and two USB Root Hubs all seemingly not entering 'suspend state ' I've tried various other things over the last month or so since I noticed this issue but I can't honestly remember what they are Please respond if you have nay ideas and I can reply with the results USB Suspend USB Device not Entering Suspend The USB device did not enter the Suspend state Processor power management may be prevented if a USB device does not enter the Suspend state when not in use Device Name USB Composite Device Host Controller ID PCI VEN amp DEV D D Host Controller Location PCI bus device function Device ID USB VID D amp PID C Port Path USB Suspend USB Device not Entering Suspend The USB device did not enter the Suspend state Processor power management may be prevented if a USB device does not enter the Suspend state when not in use Device Name USB Root Hub Host Controller ID PCI VEN amp DEV D D Host Controller Location PCI bus device function Device ID USB VID amp PID D D Port Path USB Suspend USB Device not Entering Suspend The USB device did not enter the Suspend state Processor power management may be prevented if a USB device does not enter the Suspend state when not in use Device Name USB Root Hub Host Controller ID PCI VEN amp DEV D Host Controller Location PCI bus device function Device ID USB VID amp PID D Port Path USB Suspend USB Device not Entering Suspend The USB device did not enter the Suspend state Processor power management may be prevented if a USB device does not enter the Suspend state when not in use Device Name USB Composite Device Host Controller ID PCI VEN amp DEV D D Host Controller Location PCI bus device function Device ID USB VID D amp PID C Port Path USB Suspend USB Device not Entering Suspend The USB device did not enter the Suspend state Processor power management may be prevented if a USB device does not enter the Suspend state when not in use Device Name Generic USB Hub Host Controller ID PCI VEN amp DEV D D Host Controller Location PCI bus device function Device ID USB VID amp PID Port Path USB Suspend USB Device not Entering Suspend The USB device did not enter the Suspend state Processor power management may be prevented if a USB device does not enter the Suspend state when not in use Device Name Generic USB Hub Host Controller ID PCI VEN amp DEV D Host Controller Location PCI bus device function Device... Read more

A:Screen saver won't operate - possible USB issue

Have you tried going into the system folder in the control panel and then into device manager and looking under power management for each usb hub to see if the "allow windows/computer to turn this device off to save energy" or something like that box is checked? That may not be the exact wording; but; have you checked to see if that box is checked? Cause if it is; windows is probably turning power to the associated usb hub(s) off; which may be what in turn is causing the issue. Try checking that to see if that resolves the issue. Take a look at the image I have uploaded and it will show the box i am talking about.

http://www.sevenforums.com/performance-maintenance/323286-screen-saver-wont-operate-possible-usb-issue.html
Relevancy 39.99%

Have Aspire R7-571 laptop.  I'm trying to operate a bluetooth headset.  In device mgr folder, under Bluetooth USB- I'm getting the message: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Is this referring to an external USB dongle; in which case, shouldn't the computer have the bluetooth operability buitl in?  In "settings" bluetooth does not show up?!?   If so, how can I correct this situation?Thanks.










Solved!
Go to Solution.

A:Can't operate bluetooth headset. Getting a "Code 1...

Right click on the one getting the code and select uninstall. Then click Scan for Hardware Changes.If that doesn't fix it, go to Control Panel/Programs and Features , uninstall the Bluetooth driver, download and install a new driver from http://www.acer.com/ac/en/US/content/drivers

http://community.acer.com/t5/S-and-R-Series-Laptops/Can-t-operate-bluetooth-headset-Getting-a-quot-Code-19-quot/td-p/420883/jump-to/first-unread-message
Relevancy 39.99%

Hello,
all I hope you can help I have a hp pavilion dv71245dx. the keyboard will not work in Admin Login. the keyboard will only make beeping sounds when you press the keys. If i login as a guest, keyboard works just fine and the keyboard also works for initial login. I updated the ps/2 driver and the bios and i did the battery trick still will not work. also how do i keep that darn magnifier from popping up on its own?

Please help. Ive researched all day and i am only finding the battery solution.
 

https://forums.techguy.org/threads/hp-pavilion-dv7-keyboard-wont-operate.980095/
Relevancy 39.99%

I ve searched and search and found nothing so I need a little help with this one On my simultaneously. XP allow not 2 will Solved: to devices USB operate computer I run portable apps from a flash drive I also like to connect my Android phone Solved: XP will not allow 2 USB devices to operate simultaneously. The problem I have is that while either one works swell by itself the computer fails Solved: XP will not allow 2 USB devices to operate simultaneously. to recognize one or the other when both are plugged in at the Solved: XP will not allow 2 USB devices to operate simultaneously. same time Preference is always given to the device that is plugged in first As I m always using my flash drive it s a hassle to disconnect it just to plug in my phone And it s even more irritating to know that I can t access my portable apps as long as my phone is connected The best I can do so far is to plug the phone in and choose charge only which allows XP to see it as an Android ADB device This assigns drive letters to the multiple drives android uses but all drives are listed as being empty I should also note that I do have a printer connected via USB but I never have any problems with it What I ve tried to fix the problem -Utilize the USB ports in the rear of the computer - No Luck -Manually assigning drive letters - No Luck -Search for alternative driver for Flash Drive - No Luck -Downloaded HTC SYNC for an alternative driver to my phone - No Luck -Downloaded and quot Unsuccessfully quot attempted to install Android SDK USB driver - I don t know if this would have solved the problem or not but the installation of SDK never seems to give me the driver the phone is looking for So I m at a loss as to whether or not there is a fix to my problem Any help would be appreciated Computer - XP SP Pent FlashDrive - Gig Corsair Voyager Phone Rooted HTC Incredible running Synergy RC I throw this in there just for an FYI but the problem was present on other ROMS I ve tried so I m not led to believe it s a Rom issue I m not sure if this is a computer issue or a phone issue so I ve cross posted this with the Phone Guru s over at XDA nbsp

A:Solved: XP will not allow 2 USB devices to operate simultaneously.

It is probably a limitation of your computers USB ports being under powered. Have you tried a powered USB hub?
 

https://forums.techguy.org/threads/solved-xp-will-not-allow-2-usb-devices-to-operate-simultaneously.1012836/
Relevancy 39.99%

so im currently doing ICAU2005A Operate computer hardware
as a module as a part of my trainee ship and im lost on question 5 and 7

5.Describe the boot process i spoke to my teacher and she said There are nine actual steps that occur during the boot process. Can you list these please?
7.• State the general differences between the different computer
platforms and their respective operating systems, my teacher said As a suggestion, have a look under “computer platforms” on wikipedia. In this instance we are interested in the different hardware platforms and the associated operating systems which will run on them and that really did not help

so if someone could give me some help it would be great

please and thankyou
 

https://forums.techguy.org/threads/icau2005a-operate-computer-hardware.835971/
Relevancy 39.99%

I am having trouble with the front bezel wiring. I purchased a rosewill case and an asus motherboard. The wiring of the case has the following: power sw, reset sw, hdd led but I cannot find the power led. Since I am unable to find this I feel the computer will not operate due to this factor. Would this affect the computer not to operate. I attached all the wires according the the motherboard instructions except the power led. I plug the computer in and nothing. Yes I have attached the atx power supply. Any help would be appreciated. Thanks.
 

Relevancy 39.99%

Hello I have a computer that is experiencing slowdowns and difficulties operating install or operate Can't antivirus/adaware any program When I attempt to install adaware I get past the installation only to have the program hang and then lock up on the update process If I try to run it without the update it critical errors when it begins to scan the C drive I have attempted to install Avast but the program also hangs on the quot Finishing Setup quot installation process and if stopped does not run I have tried a few of your online scanners and other C Drive scanners but anytime any program attempts to scan the C drive either the program or the computer will lock up or critical error The computer is a Dell Intel Pentium Ghz CPU MB RAM running Windows XP Home Edition Service Pack The Can't install or operate antivirus/adaware computer generally connects with dial up but for the purposes of repair Can't install or operate antivirus/adaware I have moved it to Can't install or operate antivirus/adaware a broadband location The only program I have been able to run successfully so far is HiJack this and here is the log Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode NormalRunning processes C WINDOWS System smss exeC WINDOWS system winlogon exeC WINDOWS system services exeC WINDOWS system lsass exeC WINDOWS system svchost exeC WINDOWS System svchost exeC WINDOWS system spoolsv exeC Program Files Symantec LiveUpdate ALUSchedulerSvc exeC WINDOWS System svchost exeC WINDOWS Explorer EXEC WINDOWS system hkcmd exeC WINDOWS system ctfmon exeC WINDOWS System svchost exeC Program Files Lavasoft Ad-Aware AAWService exeC Program Files Lavasoft Ad-Aware AAWTray exeC WINDOWS system msfeedssync exeC Program Files Trend Micro HijackThis HijackThis exeR - HKCU Software Microsoft Internet Explorer Main Search Bar http www localnet com adv search phtmlR - HKCU Software Microsoft Internet Explorer Main Start Page http www yahoo com R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Window Title Microsoft Internet Explorer provided by LocalNetO - BHO AcroIEHlprObj Class - E F-C D - D -B D- B D BE B - C Program Files Adobe Acrobat Reader ActiveX AcroIEHelper ocxO - BHO Viewpoint Toolbar BHO - A C -B - EDB- - D C EC - C Program Files Viewpoint Viewpoint Toolbar V ViewBarBHO dllO - Toolbar Viewpoint Toolbar - F AD AA -D - - DAF- D B - C Program Files Viewpoint Viewpoint Toolbar V ViewBar dllO - HKLM Run IgfxTray C WINDOWS system igfxtray exeO - HKLM Run HotKeysCmds C WINDOWS system hkcmd exeO - HKLM Run Pad A-HtEHL D Pad A exeO - HKCU Run ctfmon exe C WINDOWS system ctfmon exeO - HKUS S- - - Run ALUAlert C Program Files Symantec LiveUpdate ALUNotify exe User SYSTEM O - HKUS S- - - RunOnce RunNarrator Narrator exe User SYSTEM O - HKUS DEFAULT Run ALUAlert C Program Files Symantec LiveUpdate ALUNotify exe User Default user O - HKUS DEFAULT RunOnce RunNarrator Narrator exe User Default user O - Extra context menu item amp Google Search - res c program files google GoogleToolbar dll cmsearch htmlO - Extra context menu item amp Viewpoint Search - res C Program Files Viewpoint Viewpoint Toolbar V ViewBar dll CXTSEARCH HTMLO - Extra context menu item Backward Links - res c program files google GoogleToolbar dll cmbacklinks htmlO - Extra context menu item Cached Snapshot of Page - res c program files google GoogleToolbar dll cmcache htmlO - Extra context menu item Similar Pages - res c program files google GoogleToolbar dll cmsimilar htmlO - Extra context menu item Translate int... Read more

A:Can't install or operate antivirus/adaware

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.In the custom scan box paste the following:CODEnetsvcsmsconfigsafebootminimalsafebootnetworkactivexdrivers32%systemroot%\system32\*.dll /lockedfiles%systemroot%\Tasks\*.job /lockedfiles/md5starteventlog.dllscecli.dllnetlogon.dllcngaudit.dllsceclt.dllntelogon.dlllogevent.dlliaStor.sysnvstor.sysatapi.sysIdeChnDr.sysviasraid.sysAGP440.sysvaxscsi.sysnvatabus.sysviamraid.sysnvata.sysnvgts.sysiastorv.sysViPrt.syseNetHook.dllahcix86.sysKR10N.sysnvstor32.sysahcix86s.sysnvrd32.sys/md5stop%systemroot%\*. /mp /sPush the button.Two reports will open, copy and paste them in a reply here:OTL.txt <-- Will be openedExtra.txt<--Will be minimizedIn the upper right hand corner of the topic you will see a button called Options. If you click on this in the drop-down menu you can choose Track this topic. I suggest you do this and select Immediate E-Mail notification and click on Proceed. This way you will be advised when we respond to your topic and facilitate the cleaning of your machine.After 5 days if a topic is not replied to we assume it has been abandoned and it is closed.regards myrti

http://www.bleepingcomputer.com/forums/t/299972/cant-install-or-operate-antivirusadaware/
Relevancy 39.99%

While on vacation last week W7 updated and since then Avira has not updated.I have uninstalled/reinstalled Avira from control panel and the new version did not work. Scanned system with MWB and it found no infections. Used the Avira registry cleaner, tried to install new version and got the same results. Finally, I did a system restore to the previous point before the W7 critical update on 7/25 Need virus protection and the ability to update...can you help?

A:Avira will not Operate after Latest W7 Update

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

http://www.bleepingcomputer.com/forums/t/542853/avira-will-not-operate-after-latest-w7-update/
Relevancy 39.99%

hi,
i just wonder is there any possibility to hear music from speaker and headset at the same time? i got a headset now, but i also want to use the speaker to listen the alarm sound.
Thank you for viewing this tread and also any advise will be appreciated.
 

Relevancy 39.99%

Computer Dell Dimension 1100 running XP with USB2. (3 years old )
On loading flash drive Start Wizard states it is unable to locate the relevent software. Divice manager states it is not connected.
Having tried to download a driver from Drive Doctor I find the driver is trying to locate a scanner.
The flash drive works when used in a relatives computer.
 

https://forums.techguy.org/threads/flash-drive-failure-to-operate.792140/
Relevancy 39.99%

Dell Inspiron 600m

I'm just wondering if there are any issues with the battery functions that could be tested before running out to buy a new battery. Right now, the battery is worth more than the machine.

If nothing else, time to upgrade to an HP.
 

Relevancy 39.99%

I am certain I have an infection as my virus scan has caught it a few times. I am unable to run either MWB or HJT to eliminate this at the heart. Please Help.
 

https://forums.techguy.org/threads/mwb-and-hjt-will-nolonger-operate-suspected-trojan.838919/
Relevancy 39.99%

I have dell dimension2400 series desktop--can I take out my hard drive and install in an
usb 2 external enclosure and operate my computer that way with no hard drive in the tower
and if so what do I have to do in f2 setup in order to get everything to work properly..?
Any help appreciated .......osha
 

https://forums.techguy.org/threads/operate-with-external-hard-drive-only.731539/