Windows Support Forum

Asus P6X58D-E - SATA II SSD or SATA III SSD?

Q: Asus P6X58D-E - SATA II SSD or SATA III SSD?

Hey guys sorry if this is in the wrong section, but i'm looking to upgrade from a HDD to SSD. I've been reading online about my board and apparently the marvell 9128 controller sucks speed wise. I was looking at the Corsair Force 3 because of the read/write speeds. Upon doing more digging though it looks like id be better off running a drive on the SATA 2 ports. Would I then be better off getting a SATA 2 SSD for slightly cheaper?

I'm confused on what to do. Any advice would be much appreciated.

Cheers.

Relevancy 100%
Preferred Solution: Asus P6X58D-E - SATA II SSD or SATA III SSD?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Asus P6X58D-E - SATA II SSD or SATA III SSD?

See My Specs. Intel SATA II works better for me than Marvel SATA III. All those spec sheets means very little in real world applications. I chose the Intel 510 for three reasons, reliability, reliability, 5 year warranty.

http://www.sevenforums.com/hardware-devices/217845-asus-p6x58d-e-sata-ii-ssd-sata-iii-ssd.html
Relevancy 100.75%

Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in.

We used Zinstall HDD by-the-way and I would highly recommend this application for such a job plus, it is extremely fast.

Anyway, while he was diagnosing my boot-up issue he discovered I had a malfunctioning network card; while removing this, he noticed all the SATA settings were set to SATA 2.

When he reset these to SATA 3, the PC would not start-up! When he set them again to SATA 2 there was no problem and it worked fine?

Can anyone illuminate me on this please?

Thanks for any/all imput

A:SATA 3 not working on Asus P6X58D-E motherboard with SATA III support

Many people have had issues with the Marvell controller on that MB.
You may want to live with SATA 3g/s. Easiest path, no real difference except for benchmarks, and no chance of data loss.
But in case you're not satisfied with that, here's something to look at.

AHCI-mode on Marvell 9128 controller in Windows 7 Ultimate x64

and

[Solved] ASUS P6x58D-E, Win 7 (64) Marvell AT 91xx - Asus - Motherboards-Memory
A fellow name Jaquith seems to know what's up.

Bottom line is you need the right drivers.

http://www.sevenforums.com/hardware-devices/237306-sata-3-not-working-asus-p6x58d-e-motherboard-sata-iii-support.html
Relevancy 87.73%

I've had this system for a while and I've constantly had problems with the sata ports Sometimes it works and I can see my two hd other times I have to reboot go into bios make no changes exit and it works again I just purchased an OCZ G Vertex SSDto use as a boot drive and can't get problems Asus Marvell 3 9128 SATA P6x58D-E it to work on the sata ports I've read that the Marvell controller isn't the best but I would think It should Asus P6x58D-E Marvell 9128 SATA 3 problems at least recognize the drives Mobo is an Asus P x D-E So this is what I've done Connected ssd to normal sata ports Asus P6x58D-E Marvell 9128 SATA 3 problems No hard drives connected Booted up and loaded windows bit Load mb drivers from asus cd including Marvell controller Restarted and went into bios to set marvell port to AHCI mode Shut down and connected SSD to marvel sata port Boot up works fine Shut down and add hard drive to sata port Boot up and system can't find ssd Move ssd back to sata port and all is well again Very frustrating Does anyone know of a fix for this problem The very first time installing windows I had the ssd connected to the sata port and at the disk format screen it asked for a driver I couldn't find a file for marvell just the exe to install the driver This is when I moved back to the sata port

A:Asus P6x58D-E Marvell 9128 SATA 3 problems

Our boards are similar. I am not experincing your problem. Check you driver against the snip I have attached.

Attachment 167484

http://www.sevenforums.com/hardware-devices/177903-asus-p6x58d-e-marvell-9128-sata-3-problems.html
Relevancy 86.8%

I am trying to install a WD FAEX SATA HD in my SATA bios Asus Premium III not in detected P6X58D Solved: Asus P X D Premium motherboard The specs say it has SATA Gb s interfaces but the bios does not detect the drive However when I connect to a SATA Gb s interface the Solved: SATA III not detected in bios Asus P6X58D Premium drive works fine I am still at bios version and would want to avoid a bios upgrade if I don t need it Is there a way to get the drive to work at Gb s Is there any advantage My build includes Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium bit Processor Intel R Core TM i CPU GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card ATI Radeon HD Microsoft Corporation WDDM Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total - MB Free - MB F Total - MB Free - MB Solved: SATA III not detected in bios Asus P6X58D Premium G Total - MB Free - MB I Total - MB Free - MB Motherboard ASUSTeK Computer INC P X D PREMIUM Antivirus None this is still an ongoing clean re-install so av didn t show yet TIA nbsp

A:Solved: SATA III not detected in bios Asus P6X58D Premium

Only the burst speed will increase going to SATA 6Gbs, sequential read and write speeds do not exceed SATA 3Gbs speeds.

The 6Gbs ports on your motherboard are provided by an additional Marvell controller, therefor they should not show up in the BIOS but in the Marvell ROM that loads after the initial BIOS. The Marvell controller also needs to be enabled in the BIOS, and it may be disabled.

Also, grab the motherboard manual as well and see what settings should be enabled for the Marvell controller to work and how to enable AHCI on it: http://www.asus.com/Motherboards/Intel_Socket_1366/P6X58D_Premium/#download
 

https://forums.techguy.org/threads/solved-sata-iii-not-detected-in-bios-asus-p6x58d-premium.1067687/
Relevancy 82.99%

My Box config

AMD athlon 64bit 2800+

ASUS K8-VX Mother board

want to upgrade to 500 gigs or if possible to 1tb Sata HDD

Problem is
1) Mother board is old done almost 3 years
2) I don't know what version of SATA will be supported
Please advise

Thanks in advance for your answers

Regards
 

A:Need to upgrade to SATA Not sure if it is sata or sata II which my mobo supports

http://www.asus.com/search.aspx?searchitem=1&searchkey=k8v-x

I don't know why, but everytime I go to asus, they're hving site maintenance
Anyway see if you can click on Specifications there
 

http://www.techspot.com/community/topics/need-to-upgrade-to-sata-not-sure-if-it-is-sata-or-sata-ii-which-my-mobo-supports.114075/
Relevancy 79.12%

Please help.
I've been getting this message for about a month. However, after rebooting sometimes once, sometimes several times the computer eventually boots up. After reading multiple posts on similar issues, I went and got a new hard drive. I backed up all the files and was going to reinstall evertyhing from scratch onto this new hard drive. I took the old one out and put in the new one. I get the same message when it tries to boot.
At this point I swapped the drives again (the old one is back in).
I am at a loss.
Am I doing something wrong when I'm installing the new drive? Why am I getting the same message with this new drive?
System specs:
Inspiron 531
Vista
AMD Athlon 64 X2 Dual Core 5600+ 2.81 GHz
2GB RAM

Thank you.
 

A:no boot device available sata 0: installed sata 1: installed sata 2: none sata 3: non

https://forums.techguy.org/threads/no-boot-device-available-sata-0-installed-sata-1-installed-sata-2-none-sata-3-non.962890/
Relevancy 76.11%

I have had this motherboard put in my custom built pc , the motherboard came with a small oblong wi fi adapter , i have not tried it yet as it looks a bit primative. Has anyone who is reading this tried it , is it any good or should i stick with ethernet connection.

http://www.pcadvisor.co.uk/forum/helproom-1/asusreg-rog-strix-x99-atx-usb-31-sata-6-gbs-4604330/
Relevancy 76.11%

I just bought a WD1600JD SATA hard drive but can't use it cause the bios on my ASUS K8V-X motherboard won't see it.

I have tried everything and it just won't work. Took it back to the shop and they tried it out and it showed straight away. The shop even installed XP on it but it still won't show on my computer.

I upgraded to the latest BIOS but that doesn't make any difference

Could someone please help out as I don't want to be stuck with a hard drive I can't use

Many thanks in advance
 

Relevancy 76.11%

Hi gang,
im trying to finish off my new build and have hit a snag with my new sata optical drive. it is an Asus DRW22B1LT. device manager says that it is working properly,and Asus tells me that the windows default driver is fine. however it will only see about 1 in every 10 discs i put in. the mobo is a DFI MB DFI 790FX-M2RS AM2+ 790FX RT. any ideas?
 

A:Asus sata problem

Windows XP or VISTA?
 

http://www.techspot.com/community/topics/asus-sata-problem.122575/
Relevancy 76.11%

I've been reading that it is possible to set a SATA-300 HDD to run at a speed of SATA-150 on boards that support only SATA-150. Is this true? If it is, what do I have to do to set this up so that I can purchase a SATA-300 HDD to work on my mobo that only supports SATA-150.
 

A:Can I use SATA-300 on Asus K8V-X SE Mobo?

Anyone....?
 

http://www.techspot.com/community/topics/can-i-use-sata-300-on-asus-k8v-x-se-mobo.77472/
Relevancy 76.11%

hi

i posted previosly regarding an asus m2n570 sli delux mobo and how the ide would not see my ide devices, as i suspected drivers need to be installed for them to work,my problem was i needed my ide dvdrom to install them and a new os.anyway i bought sata dvdrom and all works fine.

however now i have attached my spare hdd using the ide cable windows will not start up,it sticks at the windows loading logo and just stays with hdd spinning.

the sata hdd is the one with the os on,the ide is not formatted but contians data i backed up to.
i have it set as secondary ide slave

can anyone suggest anything please
 

Relevancy 76.11%

My SSD firmware updater needs to do it in DOS. To be recognized in DOS, my HD has to be interfaced temporary in IDE.

I went through all menus and submenus, but I didn't find way to do it in BIOS. Any clue?

A:Asus P5N-MX; how to change from SATA to IDE

[QUOTE=Saintor;1925869] To be recognized in DOS, my HD has to be interfaced temporary in IDE.
/QUOTE]

It does? I that hard to believe. Where did you get that information?

You can't update the firmware while the drive is running the OS. So you need to run the executable from outside the OS.

One way you can do this by booting from your W7 installation DVD and performing the operations to access the System Recovery Options and then choosing the option to open a DOS prompt (Command Prompt). Then you navigate to the EXE (on the USB stick, I assume) using DOS commands.

System Recovery Options
See if that works for you.

http://www.sevenforums.com/hardware-devices/230105-asus-p5n-mx-how-change-sata-ide.html
Relevancy 75.25%

I want to transfer data from my hard drive in my laptop (Lenovo Y480) to a hard drive in my desktop. the cables for the sata adapter do not fit the hard drive from the laptop. Is there a different form for a 2.5 hard drive and a 3.5 hard drive?
 

A:sata to usb adapter cable dosen't fit sata hard drive in laptop?

Does the drive have an adapter need to remove to expose the SATA conenctors? I don;t see anything about the Y480 not having a standard SATA drive and laptop and desktop SATA connectors are the same.

Maybe post pictures of both the drive and your SATA cables.
 

https://forums.techguy.org/threads/sata-to-usb-adapter-cable-dosent-fit-sata-hard-drive-in-laptop.1136877/
Relevancy 75.25%

Well I was wondering because I want to overclock my system, but don't want to scrap my raid 0 array

up to now I got from 2000mhz to 2250 mhz no problem... hard drives are in port 1 2 and 3 for now. Everything is stable.

Anyways, any1 knows?

Thanks
 

Relevancy 75.25%

I am running XP Pro, with Asus K8V SE M\B and currently Maxtor SATA drive.
I needed to clone my hard drive to a new one, as the old one was suspect.
I used Norton Ghost to clone my O\S and data over to the new "WD" SATA drive (which was connected via a sata-usb adapter for convenience)

When inserting the new WD drive in to the M\B, the bios wouldn't detect the drive at all (although Windows had previously). I tried all SATA connectors on the board, but no joy with detection.
The old MAXTOR drive was only 2 yrs old (80gb), and the new drive is 250gb.

I can't see any settings in the bios to detect the sata drive.

Any ideas guys?

Many Thanks

Nick
 

A:Asus K8V SE and SATA Drive detection

IIRC these old VIA sets with the VT8237 southbridge did not upport booting from SATA. I coud well be wrong and it might be that you have to install the VIA motherboard drivers for the SATA to function. Either way it is indeed a pain.

I would reinstall the old drive and make sure the SATA drivers are indeed there. Then I would reclone the new drive from there and stand back and see what explodes.

Good luck.
 

http://www.techspot.com/community/topics/asus-k8v-se-and-sata-drive-detection.132891/
Relevancy 75.25%

Help!!!

My specs:
ASUS P4C800-E
36.7 GB Raptor (SATA)
200 GB Maxtor (IDE)
100 GB WD (IDE)

I want to set up the SATA drive to load Windows and have the other IDE drives as backup. I searched the internet as well as the manual but I couldn't find anything that will help me do it.

When I plug in all the drives as once, only the IDE drives get recognized. Any help would be greatly appreciated!
 

Relevancy 75.25%

Im upgrading my hardware,so I'm wondering if it's a good idea to buy a WD HDD 640GB SATA III,and connect it to my mobo.

My mobo is Asus M2N,it has SATA connectors,and I have connected one WD SATA II HDD,it works just fine.

I'd like to know if this mobo supports SATA III HDDs.My priority at the moment is not full speed and advantages of SATA III HDDs,but the question if I could use it on this mobo.It's ok if my mobo downgrades HDD's capablities,cause I'm planning to replace the mobo in the next few months.

Have'nt found any topic that's dealing with this kind of issue,so if I'm wrong,I'd appreciate a link that describes the issue.

Looking forward to any response,thx.

Mario

A:WD SATA III 640GB HDD compatible with Asus M2N

TBH, Im not sure SATA 3 is really woth it for a mechanical HD.

I mean, they can not operate fast enough to saturate SATA 2, much less SATA 3.


Even a great number of SSDs, which are leaps and bounds faster, aren't really saturating SATA2. Although they are starting to now.

Perhaps others with more knowledge on the subject can provide insight of the advantages though.



From the specs I looked at, it doesnt appear it has SATA 3 ports. You may find out for sure in the owners manual though.

http://www.sevenforums.com/hardware-devices/145065-wd-sata-iii-640gb-hdd-compatible-asus-m2n.html
Relevancy 75.25%

Asus p8p670-m will see the dvd drives but not the sata or ide I have tried 8 different drives. 3 sata one at a time in different slots and 5 ide drives one at a time.. I have reset cmos then removed the battery and reset cmos again,, what is the fix please
 

http://www.techspot.com/community/topics/asus-p8p670-m-will-see-the-dvd-drives-but-not-the-sata.203645/
Relevancy 75.25%

I've considered installing Windows XP32bit instead of Windows Vista 64bit, but when installing Windows XP you need to hit F6 key to install RAID drivers for it to detect the Sata HDDs.

This was simple with my old motherboard (ABIT AV8 3rd Eye) because I had a floppy with the required drivers on, but now I don't have any floppy... can I download the files somewhere?

I hope what I've said is clear Please ask if there are any problems understanding something

Thanks

Schmutz
 

A:Help with ASUS P5K-E SATA drive detection

You should be able to find the drivers at:
www.asus.com.tw

I've had to install a driver for a RAID array, but never a drive.
 

http://www.techspot.com/community/topics/help-with-asus-p5k-e-sata-drive-detection.89553/
Relevancy 75.25%

My parents computer crashed on them (MOBO failure) so I was going to connect their hard drive to my computer to retrieve their files. I have an Asus K8V SE MOBO with and PATA hard drive. My parents hard drive is a SATA drive. I cannot get the computer to recognize the SATA drive. This seems to be a common issue with this MOBO can someone please help me? Thanks
 

A:Asus K8V MOBO with Sata HDD Problems

Install Driver ...
If driver is not the issue Update the BIOS ...
ASUS

cheers
 

http://www.techspot.com/community/topics/asus-k8v-mobo-with-sata-hdd-problems.98064/
Relevancy 75.25%

I recently installed a SATA drive with a SIIG SATA controller on my A7V133 mobo and have been using the drive a few weeks for backup files. Now I want to use it as my boot drive, but Win XP Setup can't detect it. Before booting from the XP CD, I enabled SCSI in BIOS, set SCSI as second in boot sequence (after CD-ROM) and entered the SI website's latest driver when called for in Setup. The setup message is "there is no disk in this drive" and it labels the drive as "157066 MB disk 0 at Id 0 on bus 0 on si3112 (MBR)." The Asus has a RAID option, but I'm not sure whether this would be an option since the drive runs off its own card. Appreciate suggestions!
 

A:Asus A7V133 and SATA drive

You should have gotten a CD with your motherboard drivers on it, if you look through there, there should be raid/scsi chipset drivers for your OS. Copy those to Floppy ( preferably just the version you need).

When you start installation of XP hit F6 to install 3rd party scsi drivers, after some time it will ask you to select your device. Put the floppy in and select your device and it will read off your floppy ( it should display your chipset controller).

Then it should take you to your partition screen, install the os on your SATA drive.

I know youre not using raid ( I think),but my promise chipset controls both my raid and my SATA drives. Should be the same for your chipset. Unfortunatly, you have to "preinstall" the drivers to full functionality, to use part of it.

Its much easier if you just slipstream through. You can do everything all in one swoop, raid drivers, sp2....
 

http://www.techspot.com/community/topics/asus-a7v133-and-sata-drive.16350/
Relevancy 75.25%

specs:
asus k8v se deluxe
maxtor diamondmax 10 SATA

Hello, i have for the second time problems installing WinXP on my SATA HDD. The first time some smart friend could fix it for me... this time I want to install WinXP64.

It detects my drive proper in my sata-thingy from fasttrack...
So I start the Windows Setup, and press F6 to load an up-to-date driver what is no problem... and than when i must select a drive it says there is no HDD present...

I'm not sure if there is allready a topic for this problem, found one that looked like it... but could find a solution in there. I'm not quite pro in this kind of sh*t.

Please help me out here
 

A:ASUS K8V SE Deluxe SATA problems

After you've pressed F6, let it finish loading a few more drivers then it should ask you for the driver for the RAID controller or SATA controller. Did you get to that part? or did it completely skip it?
 

http://www.techspot.com/community/topics/asus-k8v-se-deluxe-sata-problems.32689/
Relevancy 75.25%

I just bought a brand-new hard drive for use as added storage, but when I plugged everything in, the mobo never even detected it. I'm not using it in a RAID config, as my other hd is an IDE drive. I simply wanted to use it as a booster to my hd space.

It's a Western Digital, WD Caviar SE16, 320Gb, SATA 300 drive. As I stated before, I plugged everything in, even tried all four SATA ports on the mobo, and nothing - it doesn't even show up in the Bios.

Any suggestions? Or do I have to return my new hd?
 

A:Problem with SATA on Asus K8V SE Deluxe

Well, after a boatload of searching, I finally got 'er working - had to find the EXACT drivers that matched my BIOS versions
 

http://www.techspot.com/community/topics/problem-with-sata-on-asus-k8v-se-deluxe.74089/
Relevancy 75.25%

Hi everyone, my sister has an asus A7N8X-D 2.0 mobo and i want to know if its sata II compatiable...?
Had a look around and can't find out if it supports sata I or II so i thought i'd see if anyone knew....?

thanks!
 

https://forums.techguy.org/threads/asus-a7n8x-d-mobo-sata-i-or-ii.536126/
Relevancy 75.25%

My secondary PATA drive recently died and now when I boot my computer I get A7N8X-E on Can't boot to hdd ASUS SATA DISK BOOT FAILURE I had been running the following setup fine for over months SATA WD RAPTOR as primary boot disk PATA Seagate as SLAVE drive on primary IDE ASUS A N X-E mobo with latest bios I installed WinXP on the SATA drive with all the correct drivers a while back Everything was working Can't boot to SATA hdd on ASUS A7N8X-E fine until my PATA drive died and now my system won t boot using just the SATA drive I ve tried removing the other drives i have two CD drives on the secondary IDE moving them around making a CD the master or slave on the primary ide changing bios settings but no luck If I boot with my WinXP cd with the SATA drivers I can see the SATA drive but I don t want to format it and lose my data Anyone know what I can do to get my system back nbsp

A:Can't boot to SATA hdd on ASUS A7N8X-E

Are you absolutely positive that the SATA was your boot drive? Can you do an FDISK and look at the partition status on the drive?
 

https://forums.techguy.org/threads/cant-boot-to-sata-hdd-on-asus-a7n8x-e.420398/
Relevancy 75.25%

I had a power outage and after rebooting WinXP won't start. It says there is no HD and bios not installed. I can go into the bios setup but I can't get it to detect the Maxtor Sata HD. I've only had this pc a month, this is really depressing. I have the Asus K8V SE Deluxe motherboard. Please help. Thanks, m3guitar
 

https://forums.techguy.org/threads/asus-k8v-se-deluxe-mb-cant-detect-sata-hd.348347/
Relevancy 75.25%

I have read a thread by belveder called quot ASUS K V-X won t see SATA drive quot I have a similar problem with my own ASUS K S - MX skt AMD sempron seagate gig HDD When i boot i get the error message Primary booting MX SATA problems - with K8S ASUS slave SATA device not found Sceondary Slave SATA ASUS K8S - MX booting problems with SATA device not found press ASUS K8S - MX booting problems with SATA ctrl s to change setup or esc to skip ASUS K8S - MX booting problems with SATA waiting if i press ctrl s i get a menu with r raid settings and q quit so i go into raid settings and get the message not enough disk can be created RAID there are no other options except to quit after that After a short time it continues to load to windows normally It seems to have effect on my keyboard and mouse hardware the keyboard works thoguh setup and BIOS but not in windows THe computer wont begin to boot unless i press a key on the keyboard this makes the monitor turn on and the computer starts to boot THe mouse does not work at all What do i need to change to get my SATA settings right i have a RAID controller and can access settings for it in windows but i dont know what it does or what to change on it i just know it may be related nbsp

Relevancy 75.25%

Hello everybody A7N8X-E Asus Pb SATA Deluxe / I have a big problem with my computer The mother board is an A N X-E Deluxe and I have HD which is an Hitachi Deskstar Go SATA Pb SATA / Asus A7N8X-E Deluxe I bought it in november and it worked fine with XP till last wednesday I had several blue screens at the start of windows and after that the computer didn t want to reboot It stopped on the message quot Press Ctrl S or F to enter RAID Utility quot and didn t want to go further After a few visits on several threads I decided to flash the Bios Version of my SiI A which was at the version I installed the version Now I can pass this stage and try to reinstall XP I boot on the XP Cd and Press F when asked to install Raid drivers I have a floppy where I have the good drivers version V and I choose the Raid for XP Later Xp asks me if I want to repair it or make a new install I can choose one or the other but after that I have the message No hard drive detected Press F to quit Windows Installation I don t know what can I do now Is the hard drive dead it doesn t make any tic tac Is it the mother board Is therean option in the Bios I wait for your answers Thanks in advance Gens wave nbsp

A:Pb SATA / Asus A7N8X-E Deluxe

Same problem on the wednsday you are talking about

what a coinsident my wifes computer had the same problem ,on the same day with the same mother board with the same sata driver!!!!
I had to flash the bios to get as far to use the floppydisk drive so I can install windows new.To cut the story short because you have the same story I had to give the hard dist a low level format AND (Dont forget before you try to install windows because if you do that means 2x low format )to fdisk the main boot record TEN TIMES MINIMUM. After that you shouldn'd have no more problems if you use a GOOD firewall AND a GOOD antivirus program.The funny thing about this virus is it seams to effect only asus nvidea boards as far to my knolledge goes.Have fun with the low level format because with my wifes harddisk was 80 gig and it took 8 hours
 

http://www.techspot.com/community/topics/pb-sata-asus-a7n8x-e-deluxe.22036/
Relevancy 75.25%

i have a problem with my hdd when trying to make it to Raid in the bios, when ever i do my comp will keep restarting non stop.
when i enter bios main menu i get

primary ide master not detected
primary ide slave not detected
sec. ide master cd drive
sec. ide slave not detected
ide config << when i go here and then choose config sata as raid thats when my comp restarts but thats what my manual tells me to do with sata hdd's
any help?
specs
mobo - asus p4p800deluxe
hdd - SATA seagate 120gig sata
 

Relevancy 75.25%

Hi I have a system with an ASUS P AD -E Premium mobo When I first set up the system I installed two identical GB SATA drives on the Intel ICH R controller I set it up for RAID I never had a chance to compare a RAID setup with standard SATA in AHCI mode so I just assumed that RAID was better performance old on ASUS SATA mobo than standard SATA Now almost yrs later I have decided to replace the two old HDD s with one SATA II GB It s a Western Digital WD AALS It has a MB buffer compared with the old drives with only MB buffer All of these SATA performance on old ASUS mobo drives are RPM My first thought was to buy another of the GB drives SATA performance on old ASUS mobo so I could set up another RAID system but after reading about RAID and controllers I realize that RAID on my system is probably not worth the cost of the second HDD and I don t need another GB of storage Since both the Intel ICH R and the SIl controllers are on the PCI not the PCIE bus the max transfer rate I can get is about MB sec When I ran HD Tune for Read I found some interesting things First when I am running a single SATA II drive the GB on the Intel controller it maxes out at about MB Sec But as the test progresses say after the first minute of testing the rate drops way down to about MB sec When I run the same test on the two old drives configured as RAID on the same controller the rate is more steady at or near MB Sec but there are frequent spikes downward to MB sec I have found that some of the spikes are due to my running Norton IS while the test is in progress Shutting down the IS does reduce the number of downward spikes but does not eliminate them If I try the single SATA drive on the SIl I get read rate of only MB sec and it also drops off as the test runs I understand that there is a burst feature built into the Intel and probably the SIl controller but that is good only for what it says bursts of data What I have concluded is that if I really want great disk transfer rate I am going to have to replace my mobo to one that has the RAID controller s on the PCIE bus At the same time upgrading the mobo would give me the capability of installing a multi-core processor more RAM etc Am I correct about it being a waste of money to buy another GB drive identical to the one I just installed and configure it for RAID on the Intel ICH R Also if someone could explain why the transfer rate drops off on the SATA configuration as the test runs Thanks for your help FW nbsp

http://www.techspot.com/community/topics/sata-performance-on-old-asus-mobo.138307/
Relevancy 75.25%

I cant seem to install WindowsXP Pro on a single SATA hard drive as Windows does not see any hard drives connected There have been others with the exact same problem in this forum and in all the cases the problem was missing drivers So I tried that for both the Promise and VIA SATA controllers used the correct sata ports for each controller when testing deluxe se k8v sata asus difficulties I loaded in every driver I could find in many websites ASUS Promise etc Now this is where my problem is different from others I read There were sets of drivers for asus k8v se deluxe sata difficulties promise for VIA that did not give me the quot Windows can not find and hard drives quot screen Instead I got into the Recovery Console I didnt asus k8v se deluxe sata difficulties select the recovery console instead after loading in the drivers from the floppy it just went there on its own I thought I would be able to format my drive from this screen but the only devices it could find with the MAP command are the floppy drive and cd drive Am I still having the same problem as before Why did these drivers act differently Is there anything else I can do in the recovery console I was thinking I might have found the right drivers with these two but some other setting may be wrong Update Forgot to mention the bios detects the drive fine when its plugged into any of the ports sata ports Drivers that acted differently VIA VT VT SATA RAID Driver Package Version D WHQL Promise SATA Driver V Any ideas would be really helpful as I m fresh out -ASUS K V SE Deluxe - gb Seagate -AMD nbsp

A:asus k8v se deluxe sata difficulties

you may need a BIOS update and/or a windows patch.
 

http://www.techspot.com/community/topics/asus-k8v-se-deluxe-sata-difficulties.65911/
Relevancy 75.25%

Hi all,

I have searched the web but to no avail for a idea to fix this.

I know it has got the VIA and Promise Contollers. Now, which one do I use for a Seagate 160 Sata Dirve?

Do I need to anything special?

Thx
 

http://www.techspot.com/community/topics/asus-k8v-se-deluxe-sata-problem.62051/
Relevancy 75.25%

I have a 37gb raptor sata hooked to my Asus P4P800 and I'm trying to figure out how to also attach my Seagate 80gb sata. I want to use the Seagate as a backup and if I can improve performance, how would I do this. Does it have to be in a RAID configuration? I don't want to lose the data already on the Raptor. Any help is appreciated.

A:Different Sata drives in Asus p4p800

If this is your board
http://www.ixbt.com/mainboard/images...luxe-board.jpg
then you should be able to plug the second drive into the other sata hotplug and it will be seen as a slave drive since the boot files are already on the current drive and the hard part is over, you have the raid drivers already set because the raptor is booting XP. If you want to improve performance install just XP on the raptor, and make a partition on the 80 gig and make a program files folder and custom install all your programs to the other drive so the os runs independant of the programs you run.

http://www.techsupportforum.com/forums/f10/different-sata-drives-in-asus-p4p800-43560.html
Relevancy 75.25%

hey i got a brand new asus dvd drive and everytime i tried to make a back up of anything it freezes my computer and i couldn't do anything else.
please help
i'm using window vista 32 bit ultimate
gigabyte ga-m 56 s3 bios updated
gt8600 xxx
patriot ddr2 4gig(2x2) 800mhz
3 hdd (500,250,80)
enermax 620 wattz
 

Relevancy 75.25%

Hello,
I have a ASUS K8V SE MOBO which supports SATA primary and secondary drives, as well as RAID configruations. I currently have Windows XP with a 160 GIG IDE Drive as primary. I bought a SATA drive (300 G, WD) in the hope of making it a secondary drive for data.

The MOBO comes with PRomise RAID controller, but I am still unable to setup the new SATA drive. I have enabled the Promise controller in the BIOS Setup, but as the machine boots, the controller reports on Devices found. I have connected the drive to the Primary SATA connector.

Has anyone had similar experiences?. Can anyone guide me as to how to set up this drive as a Primary SATA drive.

Bye
Kadavil
 

A:SATA Drive - Problems on ASUS K8V SE

Hi and welcome to Techspot. Since you have two different-sized drives, you will not be needing the RAID controller. Disable it, and everything should work fine.
 

http://www.techspot.com/community/topics/sata-drive-problems-on-asus-k8v-se.64987/
Relevancy 75.25%

Ok guys. I am building a new machine with a Seagate Barracuda SATA 80 GB and an Asus A7V8X-X mobo. Since the mobo has no onboard SATA interface, I have installed an SATA PCI host adapter.
Here's the deal; the host adapter seems to work fine, but no sign of the hdd in either CMOS/BIOS or DOS. The hdd spins up, I checked, and the CMOS is set to auto-detect.
I have built dozens of machines, but this is my first SATA drive. Anyone have any ideas?
 

A:Asus A7V8X-X and SATA hdd issue

Welcome to TechSpot Forums

You're searching the drive from the PCI adapter's BIOS, right? Additional controller cards have their own BIOSes which are (usually) accessible after power-on self test, before the OS loads, there should be a screen saying which key to press to get there.
 

http://www.techspot.com/community/topics/asus-a7v8x-x-and-sata-hdd-issue.11630/
Relevancy 75.25%

Hi to all, im new on this forum and i was hopping you can help me.
I have a ASUS P4P800X-S Motherboard on my pc i know that is a lil bit old but it still works great. Im using 2 hdd IDE on it and I was thinking to install a hdd SATA .
Is that possible ????
Thanks to all of you.
 

A:HDD SATA on motherboard ASUS P4P800S-X

Yes but it is pointless. You dont get the benefit of a sata confuration b/c (unless your board had sata ports) you'll buy a converter to take ide connection to a sata connection but you're limited to the speed and features of IDE since that is the connection on the board.
 

http://www.techspot.com/community/topics/hdd-sata-on-motherboard-asus-p4p800s-x.161719/
Relevancy 75.25%

Hu Guys

My 1st thread. I hope you all can help. I have build a few pc's and i always have trouble installing the sata drivers.
My friends pc has visat 32bit and i have already installed drivers from the mobo disk. I still cant enable the satas.

dvd writer plays but doesnt record and sata wont allocate my 2nd HD. Bios sees all of sata hardware but when i goto disk manager, it stays black and the new simple volume is shaded!!

Any feedback would be much appreciated.

Thanks All
 

Relevancy 75.25%

I recently bought a new computer Asus P SD -VM Maxtor STM AS SATA-HDD Pentium R Dual-core CPU E Ghz Gb memory First it was fine I installed windows and everything worked ok Then I added my old Maxtor Y P5SD2-VM+Sata-hdd error? Asus L Ide-hdd still everything was ok but few days later when i put cd dvd in the computer sometimes crashed Asus P5SD2-VM+Sata-hdd error? and upon first restart would not find the Sata-drive On second restart it usually was ok Yesterday it did that again and this time it apparently also erased formatted the cmos since the date and time in bios had to be inputted Now I can t get the Sata-drive to work Bios shows the drive just like before but I can t put it to boot from it Also on startup it says rd hard disk error I have now installed windows to the Ide-drive and it even shows the Sata drive in control panel and says it is working ok But I can t quot reach quot it in windows When I go to discmgmt msc it only shows the Ide-drive partitions and dvd-drive and not the Sata Thought also of the Mobo onboard Sata-driver but when I boot from Mobo the support disc I get bad or missing command interpreter so that doesn t work either Somebody help nbsp

A:Asus P5SD2-VM+Sata-hdd error?

Try changing the CMOS battery.
 

https://forums.techguy.org/threads/asus-p5sd2-vm-sata-hdd-error.815936/
Relevancy 75.25%

Hi all Sorry I m new here I ve been trying to drive SATA ASUS issues DVD fix this problem for a while and really am quite stuck My brother recently got a nice brand new SATA DVD -RW drive for his Windows XP machine ASUS SATA DVD drive issues However the drive has issues - when reading any type of disk on a fresh install of Windows XP Pro SP installed it seems to instantly restart followed by a quot Windows has recovered from a serious error quot message The error details as recorded by him read as below BCCode BCP E BCP BCP BCP OSVer SP Product C DOCUME Max LOCALS Temp WER adc dir Mini - dmp C DOCUME Max LOCALS Temp WER adc dir sysdata xml The interesting detail is that Windows installs just fine using it - it s only as soon as he gets to actually using Windows that he runs into problems We tried an old IDE CDROM drive in it s place temporarily and it works just fine It s the second SATA device on the machine there is already a SATA HDD running I m guessing it might be a driver or power issue but I m not really sure what to do - would it be worth getting a new power supply or does anyone have any ideas on some software options I could take Any input help would be greatly appreciated Cheers Felix nbsp

Relevancy 75.25%

I ve been trying for the last days to get my new Seagate SV up and running with my K v SE Deluxe with no luck Whatever I do my motherboard just doesn t want to see drive Deluxe see my Won't ASUS K8V Sata the drive I currently have my system drive on a WD IDE and I m replacing my current internal storage drive also in IDE with the Seagate sata I am connecting the Seagate it to SATA I ve been to the ASUS K8V Deluxe Won't see my Sata drive ASUS download section for my motherboard and have downloaded every driver that could possilby work but this motherboard will just not see my drive I ve tried hooking it up to the Promise and downloaded those drivers but with no luck either The drive is very quiet but it s heating up which leads me to believe it s getting power and therefore not the power cable When I plug the drive into the Promise Primary Sata with the Onboard Promise Controller enabled in the bios Onboard IDE Operate Mode it says of things Either Detecting then quot Warning- The BIOS does not find proper hardware configuration Please check your system again OR Detecting then it lists one of the long numbers that s on the top of the Seagate followed by IDE BUS Master Enabled One would think an encouraging sign Read on When I try to boot with Onboard Promise Controller set to RAID the drive also shows up as ID Stripe Size M Track Mapping Status Functional with an option to enter Fastbuild Utility Either of these ways when I boot into Windows XP the drive does not show up in Disk Management or Device Manager I would like to have this drive setup on Sata because I ve heard it s faster than the Promise controller and I m not going to be utilizing any sort of RAID configuration but at this point I just want my motherboard to see this drive Any help would be tremendously appreciated nbsp

A:ASUS K8V Deluxe Won't see my Sata drive

http://support.asus.com/download/download.aspx?SLanguage=en-us&model=K8V-MX

Could be Bios update

K8V-MX BIOS SETUP
http://support.asus.com/download/download.aspx?SLanguage=en-us&model=K8V-MX&type=BIOS
 

http://www.techspot.com/community/topics/asus-k8v-deluxe-wont-see-my-sata-drive.110695/
Relevancy 75.25%

My old PATA HDD recently died on me so along with a bit of required repairs to my watercooling system i replaced it with a 80Gb SATA HDD. however im having problems with installing it on my ASUS P4P800-E deluxe motherboard.
ive got 378ATA drivers and 378RAID drivers, are they the right ones and which one do i use?
i also have the problem that i have 2 SATA DVD-Writers which involves using the RAID SATA connectors...is that even possible?

i just need a simple guide on what to do; the motherboard has 4 SATA connectors but 2 are RAID and i need to connect 1 SATA HDD and 2 SATA DVD-Writers


HELP PLEASE!!!
 

A:SATA HDD problems with an ASUS P4P800-E

?

Why would you need 2 DVD-Writers ?
Sata boards only have 2 connections.1 for a HD and recently SATA DVD-RW's
arrived.
This would be obvious in the Motherboard manual or asus website descriptions of this mbd.
But installing Sata Raid drivers is very tricky.It requires a Raid driver
floppy disk.
The files are probably on the mbd cd.and instructions.
Somewhere in the process you use F6 to activate the floppy drivers.
So read the manual and cd contents for more.
Best i can do.
I paid $25 to have mine installed.
 

http://www.techspot.com/community/topics/sata-hdd-problems-with-an-asus-p4p800-e.76162/
Relevancy 75.25%

Hello All I have searched high and low and have tried a different drivers from NVidia and 64-bit SLI Asus on of Installation Win 8 P5N32-E SATA Asus websites to try and get my rig installed with windows I installed windows preview without a problem at all However now that I try to install the full version I am unable to do so When in the beginning of the installation it claims that no media is found and no drivers Installation of Win 8 64-bit on Asus P5N32-E SLI SATA seem to help produce any media Can someone point me to the right place to find the drivers so that I can install Win on my rig I even tried copying the nv inf files from my C windows system Drivers from my preview win edition running on the same machine to no avail Please help if you have any idea what to do At this point I think I will reinstall windows and try to upgrade it at some point in the future Perhaps when becomes generally available Thanks allot in advance for any help or pointers T

A:Installation of Win 8 64-bit on Asus P5N32-E SLI SATA

http://www.asus.com/Motherboards/P5N...pport_Download

Looking on Asus site, the last drivers are for Vista.

You could try Windiws 8.1 Preview.
http://www.eightforums.com/tutorials...d-install.html

http://www.eightforums.com/installation-setup/30206-installation-win-8-64-bit-asus-p5n32-e-sli-sata.html
Relevancy 75.25%

i am the owner of an ASUS P4P800-E Deluxe motherboard but i am looking to buy a new SATA II hard disc but reading the manual it only mentions SATA I. can my motherboard handle SATA II hard disc's so i can take advantage of the 300Mbps tranfer speed?? or am i stuck with SATA I and its 150Mbps transfer speeds?

Many Thanks

Dr_Seuss
 

A:ASUS P4P800-E Deluxe....SATA II???

I would say that SATA II is not availible on the motherboard. Seeing as I can find nothing on the manufacturer's website about SATA II only SATA, also I'm not sure that there are any socket 478 mobos that take SATA II.
 

http://www.techspot.com/community/topics/asus-p4p800-e-deluxe-sata-ii.74542/
Relevancy 75.25%

Hi

i have a sata ASUS DRW-24B5S and sometime is not avaible after a boot

it's sometime that happen

in the event i got this error when my dvd burner is not avaible

source
Service Control Manager
id 7026
Error
log type System





Quote:
The following boot-start or system-start driver(s) failed to load: cdrom







Quote:
At startup it was not possible to load the following drivers:
cdrom


the only security software i have installed is eset smart security 5 64bit
i run windows 7 64 ultimate

when i got this error i push the drive button to open it but the drive doesn't respond

when i have not this error it's perfect

the drivers are

thanks

A:help why sometime is not my dvd ASUS DRW-24B5ST sata avaible ?

Hi there ... Does the Device always show up in my Computer ... But some times with a Red x ? .. Do you have Intel Rapid Storage Technology Installed .. Also have you ran windows updates recently ?

http://www.sevenforums.com/hardware-devices/297269-help-why-sometime-not-my-dvd-asus-drw-24b5st-sata-avaible.html
Relevancy 75.25%

I bought a Asus P l-mx motherboard that is supposed be able to use IDE or SATA hard drives I first hooked up my DVD burner and one hard drive so I could load windows I have another hard drive of the same but the board did not have IDE port Windows loaded fine but after booting into windows I tried to install all my drivers but I got nothing but errors not a win application or I o error I did everything I could think of and finely I burner Asus Problems DVD SATA, IDE, went into my bios setup and set the DMA and another setting and rebooted and it worked Asus SATA, IDE, DVD burner Problems like a charm but I do not understand why I had to manually set it Asus SATA, IDE, DVD burner Problems up I decided to buy two IDE to SATA converters so I could run my hard drives on my SATA ports and my DVD burner on my IDE port My system would not recognize my hard drives connected to the converters I tried every setting in the book in the bios and the hard drives and tried it on the DVD burner and another hard drive and still the system would but recognize any of the drives connected to the SATA ports So I decided to go with two hard drives on IDE One hard drive worked find but the other formated in dos but in windows the hard drive does not show up I run Maxtor Blaster for windows to see if could configure it with the utility but it stated that there was no drive to configure I tried different cables but that did not Asus SATA, IDE, DVD burner Problems work I have been trying to reach Asus tech support for five and a half days now I sent three Emails and got no response I used their live support two time only to be told that no one was available to help me I have called three times The third time I waited for their tech support to answer When someone responded after about minutes I told him what was going on After I was through he told me he was not a technician even though I called support and he said he would take my number and they would call be back I am still waiting Maybe someone in the forum have had a similar problem with Asus motherboards and can help me Three years ago Asus tech support was the best and I would buy their boards but now they must be having so many problems with their boards that they have to put half the callers on permanent hold If I can t find any answerers I will assume that the motherboard is defected and send it back for a replacement Hard drive Maxtor y PO bios updated today to latest CPU Itel Pentium d Motherboard P l-mx nbsp

http://www.techspot.com/community/topics/asus-sata-ide-dvd-burner-problems.68591/
Relevancy 74.82%

I'm looking at a Sabrent EC-UEIS7 Hard Drive Enclosure - 3.5" IDE/SATA to USB 2.0, eSATA in order to use one of my now internal Sata drives as an 'external' backup device.

If I turn the external power off on the back of the external Sata enclosure with my extra old Sata connected in it...will that drive then be safe from any virus/malware attacks from within my system (or online) even if the external enclosure Sata cable is still connected to the main PC?

I'm assuming if I have the power switch switched off on this external enclosure with my Sata drive...then nothing can read/write to the Sata drive in this external case ?

Thanks...TRinAZ

A:Safety of internal 3.5 Sata IDE in external Sata case for backups

Yes, that is correct. The HDD must have power and data to function in any capacity.

If there is no power going to any drive then they can not read or write anything even if the data cable is attached.

http://www.sevenforums.com/hardware-devices/224279-safety-internal-3-5-sata-ide-external-sata-case-backups.html
Relevancy 74.82%

I Can't Install a sata hard disk with a PCI sata controller card.?
My mb is MSI KT4V with AMD athlon 1800.My bios is AMI.
There is no option in my mb for a sata hard disk so i brought the sata pci cotroller card.
In post it shows the raid in my pci slot but cant detect my hard disk. It is a Segate 7200 rpm 160 gb hard disk.My sata pci controller card come with a driver cd but i cant install its driver in dos mode. and i think its for the windows version.
How can i install the single sata drive in my comp.
please help me...
 

A:Can't Install Sata Hard disk With PCI SATA controller card

Probably some fakeraid BS..
You have to enter the RAID BIOS and configure the drive as a RAID0 array or something similar. If it doesn't detect the drive in the RAID BIOS either, look over all your cables. Make sure you have power to the hard drive and suchlike.
 

http://www.techspot.com/community/topics/cant-install-sata-hard-disk-with-pci-sata-controller-card.81239/
Relevancy 74.82%

This call for help is apply to any one could provide help about the jmb363 jumpers setting combination to make the 2 internal sata and 2 external e-sata work at the same time , THANK YOU
AND HERE IS THE LINK FOR MY JUMPER : http://sam-2014.weebly.com/
 

http://www.techspot.com/community/topics/jmb363-jumpers-setting-pci-express-sata-e-sata-ide-card.206627/
Relevancy 74.82%

Hi i m of SATA onto Drive Problems Windows recognized. XP SATA Installation not HD. new to this site but very familiar with technology i built this machine myself im currently running off my old HD but i want to reinstall windows onto my new SATA hardrive GB this one is an IDE The BIOS and Nvidia Raid config recognize the drive but the Installation Problems of Windows XP onto SATA HD. SATA Drive not recognized. windows installation does not I was reading this thread on this site that i foudn from google http forums techguy org hardware -bios-windows-do-not-recognize html because he has the same MB as myself but different hard drives I am currently in the process of trying what he did but i do not have a floppy drive I only have a CD drive and a GB floppy drive i m going to try these routes first for the configuartion software but if not im going to see if i can find one laying around IF i cant find one and the CD flash drive don t work is there another way to try the methods described in the previous web link Hard Drives are Western Digital Caviar nbsp

A:Installation Problems of Windows XP onto SATA HD. SATA Drive not recognized.

Most newerBIOS allow an Alternate method for SATA . . Go into the bios and check the "Sata Operation" setting, change it to "Raid Autodetect/ATA if it is not already. Now try to install XP ( Verbage will vary by manufacturer )
 

https://forums.techguy.org/threads/installation-problems-of-windows-xp-onto-sata-hd-sata-drive-not-recognized.773644/
Relevancy 74.82%

this is an ASUS X83V notebook - Setting the SATA operation to 'compatible' mode at installation, Win8 CP installed fine, no hitches. Switched BIOS to Enhanced/full mode and it fails.

I recall this sort of problem from XP installs where tricks were needed to support SATA, but I do not recall this on Seven. Will Win 8 not detect the right controller, fetch the right driver? Do I need to manually force-install, reboot, reselect enhanced mode, and go from there?

thankx
c

A:Are SATA issues like Vista?? Can't operate in full SATA mode

Is this so-called "enhanced" mode switching the storage over to AHCI mode? If so, you have to edit the registry first before being able to do that.

http://www.eightforums.com/installation-setup/6357-sata-issues-like-vista-cant-operate-full-sata-mode.html
Relevancy 74.82%

So i found an old sata hardrive that was stored for about 2 years.
While the computer was on, i tried to plugged the Hardrive in the SATA power connector cable, as soon as i plugged it in the power connector there was smoke coming from the connection and my computer immediately shutdown.

Can someone explain what happened? I though you could connect devices while the computer was on without any issues?

http://www.sevenforums.com/hardware-devices/395227-connect-sata-power-cable-sata-hardrive-burn.html
Relevancy 74.82%

I read an article stating there?s very little difference between SATA cables. So I tried it for myself.

This screenshot shows the slight differences in speed; likely most of you already knew this. In testing, an 11GB file transferred in 10 seconds using either cable. Vid link shows detail of test for those interested. May not want to toss old cables.

https://www.youtube.com/watch?v=AjtIKOSVpto

A:FYI Only - Discovered only slight diff betw SATA-1 vs. SATA-3 cables

I have noticed the same. MaximumPC magazine did an exhaustive test and came to the same conclusion, a SATA cable is a SATA cable. SATA III cables have a (sometimes annoying) latch on them.http://www.maximumpc.com/article/fea...c_investigates

http://www.sevenforums.com/hardware-devices/315777-fyi-only-discovered-only-slight-diff-betw-sata-1-vs-sata-3-cables.html
Relevancy 74.39%

Hi,
I was wondering if all different G75VW laptops have 2 drivebays or only the one with a sdd in it? Cause i've got a sdd that i'd like to put as my primary drive and the drive that i get with the computer as a secondary drive.
 

A:Do all asus g75VW laptops have 2 sata cables for 2 hdd/sdd?

It appears they all have 2, but if you post your complete model # we can tell for sure.
 

https://forums.techguy.org/threads/do-all-asus-g75vw-laptops-have-2-sata-cables-for-2-hdd-sdd.1059393/
Relevancy 74.39%

P5GD2 deluxe has 8 SATA connectors, I have 2 HD set up in RAID matrix, and I would like to set up a third SATA HD with non RAID just for normal storage.

I read somewhere that the sil3114 only supports RAID. I also
have an energymax controller that has external SATA inputs. I was wondering if there is a way to us the Sil3114 SATA as non RAID setup, something like plug and play?

Respectfully

Erik
 

https://forums.techguy.org/threads/sata-config-on-asus-p5gd2-deluxe.301061/
Relevancy 74.39%

The pins on my Asus A7N8X-E MoBo on-board SATA connection literally fell apart on one of the connectors so, rather than buying a new MoBo, I bought a PCI SATA board with two internal connectors. Now when I boot up, it gets to the point just before recognizing the SATA fdrives and then the screen goes blank and I get a blinking dash in the upper left corner. If I pull the PCI board, It goes all ther way to Windows using my IDE HHD. Before the MoBo SATA connector went south, It recognized my IDE & both SATA drives with no problem. Any Help???
 

A:PCI Sata w/Asus A7N8X-E MoBo Problem

Did you install the driver for the card?
 

http://www.techspot.com/community/topics/pci-sata-w-asus-a7n8x-e-mobo-problem.41870/
Relevancy 74.39%

HI, I have an ASUS A8N-SLI Deluxe motherboard on a self build HTPC. I have a Samsung IDE HDD which isrunning Visat 32 bit fine. I wish to install a Maxtor 6L150S 233GB HDD via a SATA connection. To speed the transfer of files from my main desktop pc onto this HTPC I installed the Maxtor into my Dell Dimension 5150 using the SATA connection. XP detected it and I copied all my movies, pics etc onto it. When I connect the Maxtor into the HTPC it is not detected in BIOS. I have enabled SATA in the BIOS but still no joy.

Please can a anyone help?
 

A:Maxtor SATA HDD not detected in ASUS BIOS

Graham B, welcome to TSG
What does device manager say?
any yellow or red problems?
I have the same board and I think i had problems at first and can not remember what I did Grrrr.
I know I had to change something in the BIOS and install the raid controller from the floppy that came with my motherboard.
So go explore the BIOS and see what you can find, enable any and all sata raid options, if that fails tell me what you did or didn't do and I will try and help
 

https://forums.techguy.org/threads/maxtor-sata-hdd-not-detected-in-asus-bios.753912/
Relevancy 74.39%

My old DVD/RW was connected by IDE cable but this died a few weeks back.

I've checked my motherboard to see if it will accept SATA drives, to which it says it does.

I have bought a new DVD/RW and its connected via a SATA cable. I have plugged the SATA cable into the SATA port on the M'Board and connected it to the DVD/RW. I was assuming it would be 'Plug and Play' like the IDE cable but it's not showing in my computer.

What do I need to do to get it working? I thought I'd ask you guys first encase I downloaded drivers that I don't need.

Many Thanks
Dan

A:Installing SATA DVD/RW with Asus Rampage 2 gene

Welcome to EightForums.
Will the DVD Drive show in BIOS?

http://www.eightforums.com/drivers-hardware/15834-installing-sata-dvd-rw-asus-rampage-2-gene.html
Relevancy 74.39%

I am having problems with my Windows install - It seems like I get conflicts when having several hard drives connected I am a Linux user and have several linux installations on my hard drives - and now I have installed Windows on my fourth SATA drive in addition to my SATA DVD reader If I ASUS several bluescreens drives SATA motherboard, and run with all harddrives connected I get blue-screens with stuff like MEMORY MANAGEMENT IRQL LESS NOT EQUAL PFN LIST CORRUPT ASUS motherboard, several SATA drives and bluescreens very soon ASUS motherboard, several SATA drives and bluescreens when running Windows Sometime I can log in on my user account but sometimes I don't even get to the user selection screen Now I have disconnected harddrives and only have the SATA with my Windows install and the DVD connected and everything seems to work fine Is this some problem with my SATA Motherboard drivers I am having a ASUS P H -V motherboard Anyone have any ideas on what might be wrong I very much doubt that it is memory problems since I run both Windows XP and Linux of several flavors without problems I am not sure if this is the proper forum feel free to move the topic if it is in the wrong place edit I am using a -bit windows edit

A:ASUS motherboard, several SATA drives and bluescreens

I experienced similar oddities with a DFI X58 motherboard when I was setting up to dual-boot Windows 7 and ubuntu 9.10. The most stable and workable solution I found was to connect the boot drive (C: drive) to the SATA-0 connection. It had been on SATA-3, but GRUB gets confused in spite of my attempts to fix it logically by editing the configuration files. The best choice was to move around my SATA cables to make the boot drive the first one and GRUB and Windows 7 were very happy. I have also read that GRUB and Windows 7 can get confused with SATA DVD drives in the mix too. I don't have that on this machine, but do have that on another all SATA system that I dual-boot with GRUB for ubuntu 8.10. Note that the older GRUB worked better for me than the newer one.

Bye.

http://www.sevenforums.com/hardware-devices/100613-asus-motherboard-several-sata-drives-bluescreens.html
Relevancy 74.39%

Asus A7N8X-E Deluxe
Barton 2600+
Maxtor 160g SATA
WD 160g ATA-133

i made 2 partitions on the SATA drive
when i try to copy a 700mb movie from one partition to the other on the SATA drive, it takes about 3-4 minutes do to it.
When i copy the same movie from a drive 2 the other it takes about 35 sec.
It really bugs me. I thought the problem was the SATA hard drive and i changed it with an WD 160g SATA and i had the same results !!! :knock:
When i 'enqueque' 2000 mp3 files in winamp on the ATA drive it takes about 20 sec, on the SATA drive it takes 3-4 minutes.
does anyone have any ideea how can i fix this problem ?
Might the problem be the SATA module on the Mobo ?
 

http://www.techspot.com/community/topics/asus-a7n8x-e-deluxe-sata-problems.18462/
Relevancy 74.39%

Hi everyone. I am new to this board and I need your expertise. I am building a new computer using Asus P5AD2-E Premium motherboard, Intel 775LGA 3.2 Ghz, Geforce 6600GT, 500W power supply and so on. I wanted to know whether or not this motherboard will support SATA II hard drives such as Hitachi T7K250 (250 MB) or not. Thanks for the help.
 

http://www.techspot.com/community/topics/asus-p5ad2-e-premium-and-sata-ii-compatibility.29993/
Relevancy 74.39%

I have been getting blue screen failure The suggestions by microsoft were so variable and made no permanent fix I removed the memory cards and graphics card FX cleaned terminals with switch cleaning fuid dried with an air line re-started and it worked HD deluxe Sata blue K8V SE screen Asus fine for a day but after shutting down correctly had a problem next day on startup It would go thru the bios display but when it came to Asus K8V SE deluxe Sata HD blue screen the Xp pro screen would restart I removed the cards again and cleaned with liquid freon The powersupply main board there Asus K8V SE deluxe Sata HD blue screen is a grey residue that will only come off by rubbing with a cloth cpu Now this has the effect of freezeing the components breifly The computer is our nd computer and is about years old now I half expected it to completely quot give up the ghost quot but it restarted and is working now Now with quot speedfan quot it says all voltages are normal I wonder if I can physically check voltages with a very sensitive DC tester I have I'm wondering if the power supply is faulty and spraying with freon temporarily resets it I also get a quot spoken message quot without speakers that the failure is due to quot overclocking quot on occaision when all I have done is opened my gmail I hope someone can make some suggestions as how to continue I realise my approach to this problem is irregular but I recall a similar problem with my st computer in and after doing a similar quot fix quot it continued for another year and a half before I replaced it That was a pentium system Romaurie

A:Asus K8V SE deluxe Sata HD blue screen

"there is a grey residue that will only come off by rubbing with a cloth] cpu"

That is a thermal compound that ensures a good thermal transfer between the cpu and the cpu heatsink. If a cpu is removed, the old compound should be removed and a THIN layer of new compound applied.

"I also get a "spoken message" without speakers that the failure is due to "overclocking" on occaision"

Asus motherboards have a 'crash-free' Bios and it can activate if your motherboard gets a major fault/shock or runs into psu issues. That message is one of the signs something has happened.

Voltages are only one consideration - temperature is just as important.

Given the age of that motherboard, Everest would provide a good reading for both volts and temps;

Install Everest, run it and click on file, preferences, report and UNCHECK 'include debug information in the report' and click OK.

Then bring up Computer, Sensor, click Report, quick report-sensor, plain text and copy and paste everything under [Sensor] here.

You should save to file also.


http://www.filehippo.com/download_everest_home/

http://www.majorgeeks.com/download4181.html

http://www.softpedia.com/progDownloa...oad-16369.html

edit: I would also suggest running Memtest86 for 7 passes.

http://www.techsupportforum.com/forums/f10/asus-k8v-se-deluxe-sata-hd-blue-screen-406791.html
Relevancy 74.39%

I have just assembled a new computer with following specs:

CPU - Intel E8400
Motherboard - Asus P5E3 X38
RAM - Corsair CM3X 2x2Gb (somehow corrupt so now I?m working with only one in single channel)
Power supply - Zalman ZM600 Watt
HDD - Seagate Barracuda 1TB ST31000340AS
+cards and so on (no FDD though)

The problem is while installing Vista 64, I get no drive to select as installing location though BIOS sees the hard disc. Browsing the internet it could be a missing SATA driver for the mobo, but on the CD which came with the board there is no working driver. I found only the Intel Matrix Storage manager driver on the Asus website, but this is an .exe file and I cannot execute it since the computer is brand new.

Someone any suggestions?
Your help is much appreciated.

http://www.vistax64.com/drivers/188589-sata-driver-asus-p5e3-new-computer.html
Relevancy 74.39%

My old DVD/RW was connected by IDE cable but this died a few weeks back.

I've checked my motherboard to see if it will accept SATA drives, to which it says it does.

I have bought a new DVD/RW and its connected via a SATA cable. I have plugged the SATA cable into the SATA port on the M'Board and connected it to the DVD/RW. I was assuming it would be 'Plug and Play' like the IDE cable but it's not showing in my computer.

What do I need to do to get it working? I thought I'd ask you guys first encase I downloaded drivers that I don't need.

Many Thanks
Dan

A:Installing SATA DVD/RW with Asus Rampage 2 gene

Do you have the power cable plugged into the drive as well? If the computer is powered on, can you push the button to open the tray? If not, then it would definitely be a power issue. It may seem like a simple step, but I'm only asking because you didn't mention it...only the SATA data cable.

http://www.sevenforums.com/hardware-devices/269686-installing-sata-dvd-rw-asus-rampage-2-gene.html
Relevancy 74.39%

I have an asus a7n8x deluxe mother board with two ide hard drives and a sata hard drive that has my os on it, if I remove the ide drives the sys will not boot. when I plugged the ide hard drives in the sys booted up,.
Can anyone help me figure out how to boot with just the sata hard drive please?
os=xp sp3
cpu=socket a 462,barton 2500+
thank you very much for any help you give.
 

A:asus a7n8x deluxe sata issue

Have you checked the boot sequence in the BIOS? If those IDE drives are listed before the SATA drive try removing them.
 

https://forums.techguy.org/threads/asus-a7n8x-deluxe-sata-issue.901099/
Relevancy 74.39%

Hello everyone My first post here and I hope I am following all the rules I just built Asus P6T II performance - Sata Deluxe issue a machine with P T Deluxe mobo i GB ocz ddr ram and nVidia Hybrid card Running Vista ultimate Ran PCMark x on it and Asus P6T Deluxe performance issue - Sata II the results were not impressive when they were compared with a similar machine In all cases HDD related scores were way lower than the competition Updated the BIOS checked BIOS settings set to Enhanced mode IDE Disabled SAS No Raid The system HDD is Seagate ST AS Still no change I have attached some sample scores below My scores on the left are ridiculously low in comparison to a similar configuration Any help that anyone can provide is greatly appreciated Thank you Bobby HDD - Windows Defender MB s MB s HDD - gaming MB s MB s HDD - importing pictures to Windows Photo Gallery MB s MB s HDD - Windows Vista startup MB s MB s HDD - video editing using Windows Movie Maker MB s MB s HDD - Windows Media Center MB s MB s HDD - adding music to Windows Media Player MB s MB s HDD - application loading MB s MB s nbsp

A:Asus P6T Deluxe performance issue - Sata II

what was your pcmark score. your hdd is ide? the numbers you posted are your transfer rates compared to others with similar systems?
 

http://www.techspot.com/community/topics/asus-p6t-deluxe-performance-issue-sata-ii.119897/
Relevancy 74.39%

I could have sworn my BIOS used to allow UDMA 6 and now I have two SATA drives hooked to my P4P800 Deluxe and the BIOS only goes up to UDMA 5 with the option to set it to Auto. My controller is the 82801EB Ultra Ata Intel Controller. Shouldn't I be running at UDMA 6. The device manager also shows both drives running at UDMA 5. One drive is the WD Raptor and the other is a 80Gb Seagate.

Thanks

A:UDMA 5 with SATA drives - Asus P4P800

I always set my BIOS parameters at AUTO, what do you get for that setting?

http://www.techsupportforum.com/forums/f10/udma-5-with-sata-drives-asus-p4p800-43770.html
Relevancy 74.39%

Hi guys I m a newb and just found this site I ve read a few similar threads but nothing that solves my problem yet so I thought I d join up and post my problem I m using my old system mb and cpu for the family business Raid flying XP Asus SATA on SK8V with not The rest of SATA Raid on Asus SK8V not flying with XP the hardware is new For reference purposes in case this somehow affects my problem here s the basic parts list AMD FX- -pin Asus SK V w drivers updated as of last October Vapochill XE gb Corsair XMS pc- Wildcat Realism mb dual dvi SATA Raid on Asus SK8V not flying with XP card x Jaton fx mb dual vga SB Audigy ZS Pro x WD IDE gb mb cache HDDs x WD SATA gb mb cache HDDs There is a third identical SATA but it SATA Raid on Asus SK8V not flying with XP came DOA and is in process of being replaced Here s the problem I ve worked through several smaller issues already and am trying to move ahead usign the VIA Raid as opposed to the Promise unit on the MB I ll skip some of the progress and step right up to the current problem I have set up a Raid Mirrored array in the Via bios setup as well as enabled the Via and disabled the Promise on the main Bios I put in the XP cd boot begin Windows setup and press F insert the floppy with the latest VIA drivers e - note specifically NOT the Asus drivers but Via s own - I select the driver which supports the XP platform Windows continues and I partition the drive so that gb is set for Windows and system programs and the remaining is lumped as storage I have both fully formatted in NTFS and Quick Formatted in NTFS for the C partition Windows copies install files to C and then reboots the system NOW when the system starts and tries to boot off of C I get a very fast Windows screen which cuts to drumroll the BSOD If I let it sit long enough it comes back with an error which admittedly I have not written down yet But each time it crashes the same way I have tried it as a Raid Raid and even as a solo SATA drive with a straight-up install No dice So I have the latest VIA drivers and the MB BIOS itself is at what I believe to be the last update from Asus Everything should work right At this point I am open to any all suggestions on this since I have burned two weekends on the topic and need to have the system up and running yesterday I m sure it s something small too That s what s burning me hotouch Thanks for any help guys and gals darth nbsp

A:SATA Raid on Asus SK8V not flying with XP

To simplify it, it looks like the main problem I need to solve now is that Windows XP is not booting from the SATA drives, whether as a Raid 1 or as single stand-alone drives. :suspiciou
 

http://www.techspot.com/community/topics/sata-raid-on-asus-sk8v-not-flying-with-xp.20440/
Relevancy 74.39%

Hi everyone. I am new to this board and I need your expertise. I am building a new computer using Asus P5AD2-E Premium motherboard, Intel 775LGA 3.2 Ghz, Geforce 6600GT, 500W power supply and so on. I wanted to know whether or not this motherboard will support SATA II hard drives such as Hitachi T7K250 (250 MB) or not. Thanks for the help.
 

http://www.techspot.com/community/topics/asus-p5ad2-e-premium-and-sata-ii-compatibility.29991/
Relevancy 74.39%

Hello Everyone Ok Deluxe PC Sata Drive Asus Issues DL - - I m totally frustrated I Asus - PC DL Deluxe - Sata Drive Issues have a PC DL Deluxe mother board in which I was using a gig Sata drive without any issues I had gig sata hard drives kicking around so I decided to buy more sata cables to connect them to my computer Well after plugging them in only one of the extra drives works Now I know for sure all of the drives work And it s some kind of issue with the sata port things on my computer When this computer was first built for me I did have raid and I knew that some drivers had to be downloaded quot RAID quot quot PROMISE quot those words stick out in my head and installed with a diskette so the drives would be seen or setup with raid Well since then I ve wiped my computer and no longer use RAID I only want to use these drives as NORMAL hard drives So when I connected them all I didn t think I would need to do anything but I guess I am wrong Can someone please help me I have no clue what to do I m totally lost nbsp

A:Asus - PC DL Deluxe - Sata Drive Issues

It sounds like you need to reset your BIOS so that the other SATA drives are enabled. Go into the BIOS setup at boot time by repeatedly tapping "Del" (on my computer anyway) as the computer starts the boot cycle. Under one of the headings (Advanced BIOS Features is mine) you will see the 1st boot device etc. Probably the 3rd and 4th are disabled or set to Network. Just enable. Then save and exit the BIOS.
 

https://forums.techguy.org/threads/asus-pc-dl-deluxe-sata-drive-issues.690699/
Relevancy 74.39%

Hey all-

Here's my situation:
Asus A7N8X-E Deluxe
2xHitachi 250GB SATA Drives
1xWD 40GB IDE (Which I want out)
1280MB RAM
CD-RW
DVD-RW
...other stuff that's not important...

My goal:
XP Pro on the primary SATA drive, booting to that drive, and having the other SATA drive free for misc data. No IDE hard drives.

My problem:
The computer will not boot without the IDE hard drive. With the IDE in, it will boot into windows running off of SATA1.

When the IDE is removed, the system will go through the boot devices and fail to boot.

Anyone know how to get the ASUS A7N8X-E Deluxe to boot to SATA?

Thanks!
PJ
 

Relevancy 74.39%

Hey everyone I ve been having this SATA SK8N Asus on XP Problems installing really complicated problem installing Windows XP Pro SP on my Asus SK N motherboard using my gig SATA HDD XP Problems installing XP on Asus SK8N SATA setup isn t recognizing my hard drive at all Ive tried using the included setup driver floppy disk XP setup Problems installing XP on Asus SK8N SATA loads those fine but still doesnt find the hard drive The strange thing is I can use the very same set of drivers within Windows setup on an ATA drive to recognize the SATA Problems installing XP on Asus SK8N SATA drive easily I found a workaround for this problem but I think it s reducing my SATA performance I installed XP Pro on an gig ATA drive Then I loaded the SATA drivers in Windows which made the drive instantly appear in My Computer I then installed Seagate Diskwizard and formatted my SATA drive then used Set Up New Drive - as Boot Drive to copy the files from the ATA to the SATA drive making the SATA drive the boot drive Now I can slect the SATA drive in my BIOS as the boot drive and everything works fine This still seems like an odd problem since this is an Alienware system which came with XP preinstalled and I didn t see any abnormal settings in the BIOS or anything else to indicate they used this workaround My system Alienware Aurora Extreme AMD Athlon FX- ghz Asus SK N NForce Pro motherboard GeForce FX Ultra by BFG and Asylum Creative Audigy ZS Klipsch Promedia Ultra surround XP Pro SP SP caused problems Seagate Barracuda gig SATA st AS Silicon Image SATA motherboard SATA controller Alienware s included XP Restore CD I think part of the problem might be I am using Alienware s provided XP Restore disk which acts like a normal XP disk but doesnt seem to have the Repair XP function I ve heard about I ve tried every trick I know to get XP to read the SATA drive setting it as a single RAID drive and loading every Sk N RAID driver I could Setting it as a normal SATA drive and trying every SATA driver and loading SATA as ATA drivers Why would XP recognize one set of drivers once XP is setup but won t recognize the same set before it is setup nbsp

Relevancy 74.39%

Hello,
Thank you for taking the time to read this message.
I have recently built a system using an Asus P4C800-E Deluxe mobo.
A few years ago a 20 GIG HDD was decent but now with the much larger HDD's it is concidered pretty small.
I am thinking of purchasing a 160 ~ 200 GB SATA HDD.
I am currently using the 20 GIG "IDE" HDD .
Could one of you "Pro's" tell me:
(1) If I purchase a SATA can I still use the 20 GB IDE HDD ?
(2) Are there any programs out there that I can transfer all the contents of the 20 GB IDE HDD to the SATA HDD ?
(3) Will I be creating a headache for myself setting up the SATA HDD ?
(4) Will the SATA make a noticable difference ?
Any information will be appreciated.
I am new to the world of SATA.
Thank you.
Rick M.
 

A:Asus P4C800-E Deluxe // (1) IDE HDD -Adding SATA

It doesn't look like running both drives is an issue if you are using Windows 2000 or XP.

From the Manual:




In a legacy operating system (DOS, Windows 98, Windows ME, Windows NT) environment, using the Serial ATA connectors will disable the ICHR chipset support to one of the IDE channels (either primary or secondary channel).Click to expand...

I would not recommend using one SATA drive and one PATA drive if you want to set up RAID 0. The speeds should be the same on all drives used in a raid array.

Check out pages 2-23 and 2-24 of the manual. It seems to indicate that you can use them together.

If you don't have the manual you can download it here.

Hope this helps.
 

http://www.techspot.com/community/topics/asus-p4c800-e-deluxe-1-ide-hdd-adding-sata.23866/
Relevancy 74.39%

I have seen many posts on many forums about this exact issue Each one is a little different from each other That is why I am posting this I m setting WinXP Issues Asus P5S800-VM SATA up a system for family member and I am using the P ghz Socket T Cpu the ASUS P S -VM motherboard and Maxtor Y M gb SATA HD Like everyone else I am trying a clean install of WinXP Pro and since it does not reconize the SATA drive I will need to Asus P5S800-VM SATA WinXP Issues hit F and install drivers for the SATA drive Here is the problem I have no idea what to install when it asks me for the floppy I went to Maxtor s site they say hey get those drivers from your motherboard company I go to ASUS and they do not have SATA Asus P5S800-VM SATA WinXP Issues drivers they have RAID drivers which would be my only logical option but I am not sure I am not going to be running RAID but all the other Asus P5S800-VM SATA WinXP Issues drivers from ASUS for that board do not make sense I was wondering if anyone has found like a universal wonder driver that lets XP reconize the SATA drive at the beginning of the install I know SP supports SATA I have a disc with SP on it would it be possible to pull a driver for SATA off of the disc Any advice at all would be really helpful Thanks in advance DWF nbsp

https://forums.techguy.org/threads/asus-p5s800-vm-sata-winxp-issues.331647/
Relevancy 74.39%

Me and a buddy finished assembling a computer a few days ago specs below We put everything together and turned it on It booted up BIOS but didn t detect any SATA or IDE hard drives that I connected The only P5QL ASUS HDD SATA detect doesn't Pro thing it would detect was an IDE DVD drive that i hooked up i know the hard drives are fine because they work properly ASUS P5QL Pro doesn't detect SATA HDD in other computers after an entire weekend of fiddling with BIOS settings and testing various hard drives we dropped off the PC to our local repair shop after a day of testing the ASUS P5QL Pro doesn't detect SATA HDD repairman called me up and said he narrowed the issue down to a faulty motherboard the model of this faulty motherboard was an ASUS P KPL-CM after i got the news i went out and bought myself a brand new ASUS P QL Pro we got home swapped the boards hooked everything up then booted up the computer BAM Same exact issue didn t detect any hard drives that I connected I continued playing with BIOS for a few hours but still couldn t get anything i still haven t gotten my board to detect any hard drives I m dying to get Windows installed and have my PC up and running do i have to install any drivers please help me here are my specs ASUS P QL Pro Intel Q GHz Quad Core Kingston HyperX GB x GB PC DDR ATI Radeon HD GB SATA HDD GB IDE HDD IDE DVDROM Drive any other information is available upon request nbsp

Relevancy 74.39%

hi friends ,
my friend has brougt Asus Motherboard P5RD1 recently,

Our configuration is P5RD1+ intel p4 2.66 Ghz, 512 MB hynix ram & weston digital SATA 80 GB hdd.
We recived excelent performance with this rig but we have a simple problem we have to use SATA drivers from floppy with every Windows installation
we are master of XP installation for this pc but yesterday we tried to install Beta of Longhon it goes up to 10 % & stops responding Blue screen error.

any buddy has tried longhon on P5RD1 with sata, i am happy to see what happens on your system & i heard that bios update will solve this problem is it ?

do you know any method other than floppy drive ?

thanks in advance
 

Relevancy 74.39%

Hi having problems! On a new install using Asus maximus VII ranger MB. Purchased a crucial m500 M.2 sata ssd. Fitted to the MB and changed the BIOS allowing M.2 usage. Tried to install window 8.1 64 bit oem. Message no storage device deteched. Any ideas please

A:Will a crucial M.2 sata work with ASUS Ranger MB?

I'm running a Crucial MX100 256 GB SSD on my ASUS M4N68T-M V2 ?ATX Motherboard. Does it show up in the BIOS correctly? What SATA Port is it connected to? Some motherboards have a RAID function and a special controller just for it. If connected to that SATA controller it could be a driver issue. Did you try doing the custom install option? That option may let you partition and format the drive. You shouldn't have to but it couldn't hurt to try it.

http://www.eightforums.com/installation-setup/53926-will-crucial-m-2-sata-work-asus-ranger-mb.html
Relevancy 74.39%

I have seen many posts on many forums about this exact issue Each one is a little different from each other That is why I am posting this I m setting up a system for family member and I am using the P ghz Socket T Cpu the ASUS P S -VM motherboard and SATA Issues P5S800-VM WinXP Asus Maxtor Y M gb SATA HD Like everyone else I am trying a clean install of WinXP Pro and since it does not reconize the Asus P5S800-VM SATA WinXP Issues SATA drive I will need to hit F and install drivers for the SATA drive Here is the problem I have no idea what to install when it asks me for the floppy I went to Maxtor s site they say hey get those drivers from your motherboard company I go to ASUS and they do not have SATA drivers they have RAID drivers which would be my only logical option but I am not sure I am not going to be running RAID but all the other drivers from ASUS for that board do not make sense I was wondering if anyone has found like a universal wonder driver that lets XP Asus P5S800-VM SATA WinXP Issues reconize the SATA drive at the beginning of the install I know SP supports SATA I have a disc with SP on it would it be possible to pull a driver for SATA off of the disc Any advice at all would be really helpful Thanks in advance DWF nbsp

https://forums.techguy.org/threads/asus-p5s800-vm-sata-winxp-issues.331645/
Relevancy 74.39%

I know that you lot & SATA XP mobo issues with installing Asus have probably answered these before but i promise i did check and couldn t find a solution System AMD Athlon XP Asus A N X-D v mobo x mb Corsair RAM x Western Digital WD JS Caviar SE GB SATA HDD New Windows Drive x Maxtor gb SATA HDD Storage Drive My old IDE HDD died and so i opted to buy a SATA Asus mobo & SATA issues with installing XP drive this time as i knew the performance was better and the drives are much cheaper now I ve put the new drive into my pc the SATA connector into the primary socket the Maxtor storage drive has always been in the secondary and worked fine and tried starting my pc and the install process Unfortunately setup quot Asus mobo & SATA issues with installing XP did not find any hard disk drives installed quot I checked my BIOS settings and the boot order between SCSI and SATA is correct SATA st and when passing the BIOS stage the HDD is showing up in my SATA drives list I ve read around and understand that i might need a SATA driver disk to be able to install onto the SATA but not sure if this is applicable to me as i have already used SATA in the past for my storage drive I ve tried pressing F at the start of the installation to get to the SCSI or RAID section but i m not trying to run the disks in a RAID array so this seems pointless I tried quot Specifying Additional Device quot anyway just to see if there is anything in there and i get a prompt for a Manufacturer Support Floppy Disk alas Asus does not offer support for my mobo anymore and all I have is the original Motherboard CD which contains only the files shown in the pic below My housemate bought a disk recently that had to be initialized Could that be the problem nbsp

Relevancy 73.96%

I could really use some from SATA Changing to - needed! AHCI Help SATA RAID help with this I have a HD that I'm moving from one Windows machine to another The new system is a Gateway DX The old was was also a Gateway DX When I put the old drive in the new computer I get the Windows Splash screen the stars begin to appear and it resets I went back to the old machine and noticed the BIOS setting for SATA was set to RAID I changed the new system to RAID it just froze I put a second drive in the new machine and now it boots properly I installed the AHCI Changing from SATA RAID to SATA AHCI - Help needed! drivers changed the registry setting to rebooted the machine and changed the BIOS setting to AHCI from RAID When Windows tries to boot I'm getting the same behavior as before I get the Windows Splash screen the stars begin to appear and it resets This is for Windows BTW Gateway AND Intel have both told me I need to re-install the OS to make this happen I'd rather not do that if AT ALL possible I'd very much appreciate some help with this Thanks so much in advance for any help you can provide

A:Changing from SATA RAID to SATA AHCI - Help needed!

You have a few things happening here, 1st your Win7 is probably an OEM (Originaly came w/the system) andassuck is tiedto the original mobo & can'tbe moved.
2nd, you have 1 sys w/ a core2quad processor, and the other has an I5. This means the mobo & memory are different, you have a different setof drivers so thr=e DX4860 will not boot with the older drivers. Normallythis would take aclean install, but being an OEM version - you would need therecovery discsfromthe DX4860.

Jim

http://www.sevenforums.com/hardware-devices/234824-changing-sata-raid-sata-ahci-help-needed.html
Relevancy 73.96%

I'm wanting to upgrade to a better mainboard. I don't know much about SATA, but I've been using a SATA I hard drive very successfully through a pci controller card.

My question: If I get a new motherboard with SATA II headers, will it readily accept my SATA I hard drive? I can see how the reverse might not work, that is, not being able to connect a SATA II hard drive in a SATA I header, but maybe I'm wrong on that...?
 

A:Will SATA II mobo headers accept SATA I drive?

Yes, sata 3gb/s ports(commonly called sata II), are designed to be backward compatible. I'm using a sata I hd on my sata 3gb/s port on my chaintech vnf4/ultra, so yeah, it works.
 

http://www.techspot.com/community/topics/will-sata-ii-mobo-headers-accept-sata-i-drive.44848/
Relevancy 73.96%

I wanted to know if there is a way to connect a SATA hardrive to an older motherboard that has no SATA connection
 

A:Adapter to connect SATA HD to motherboard with no SATA connection?

You can always use one of these PCI SATA adapter cards: http://www.newegg.com/Product/Produ...ESTMATCH&N=-1&isNodeId=1&Description=pci+sata

A computer as old as you're describing will likely have an old type standard PCI slot, and NOT a PCI-E (PCI express). be certain to verify which slot you have, before you make a purchase. These are two entirely different interfaces, which are not interchangeable.
 

http://www.techspot.com/community/topics/adapter-to-connect-sata-hd-to-motherboard-with-no-sata-connection.171604/
Relevancy 73.96%

Hi Hoping you can help Not sure if this is a hard Samsung SATA 500g SATA Madel HD501 LJ drive problem OR a mobo problem Bios Info Version Pentium R Duo Core CPU E s GHz Motherboard ASUS P Q SE Samsung SATA Madel HD LJ g I kept receiving Activation PopUps and MicroSoft set me up with a custom reload when no activation numbers showed Having the OldWindows before and not liking the set SATA Samsung SATA Madel HD501 LJ 500g up SATA Samsung SATA Madel HD501 LJ 500g I decided to wipe the Sata and start fresh Spotmau is a program that I have used many times when I would like a harddrive cleaned -always thinking that a cleaned disc would be better than just writing over the top of the old Thing is I ve only ever used Spotmau in XP with No problems - Not Vista I used an old computer just freshly loaded with XP and wiped the data and formatted the drive Not only did it wipe the hard drive but when I went to load Vista I found No Bios Receiving one long beep and short beeps I clearded the COSMOS and the Bios returned But when I went to SATA Samsung SATA Madel HD501 LJ 500g load Vista it looks like the Drivers for SATA have been wiped as well I changed the Bios Boot loading around - cd drives - SATA Hardrive - No difference The message that I received - I did not write it down - but it mentioned No SATA Drives and asked for a floppy I have the floppy BUT no floppy drive I tried the mother board disc with No success I downloaded the SATA drives from the internet but when trying to reload Vista it doesn t seem to register them Thinking that the drives would be on the MoBo disc seems to say that it s not the SATA drives it relly wants The message I m receiving now when trying to load Visata is quot Windows cannot be installed to the hard disk space The partion contains one or more dynamic volumes that are not supported for installation quot I formatted the disc again - just incase - No luck When starting with just the Motherboard disc I receive the message quot Welcome to ASUS Motherboard Make A Disc Fort DOS Menu That s ALL I get from the MoBo disc And when trying to load The Vista OS I get to just after adding my activation code for the th time and it asks for the drivers Go through all the drivers on the disc as well as the MoBo disc and try the downloaded sata drives ALL again and the only message I get is quot Windows cannot be installed to the hard disk space The partion contains one or more dynamic volumes that are not supported for installation quot Any ideas I m just about pulling my hair out Hope to hera from you soon Thanks heaps Louise nbsp

A:SATA Samsung SATA Madel HD501 LJ 500g

Can't anyone help?
 

http://www.techspot.com/community/topics/sata-samsung-sata-madel-hd501-lj-500g.142033/
Relevancy 73.96%

I have 2 IDE HDs installed and added SATA drive lately. SATA runs in IDE mode in CMOS. Problem is, even though SATA drive is recognized by BIOS, Disk Manager, Norton Ghost & System Works, it doesn't show in My Computer, causing problems with saving and opening files. Tried a couple of tricks (changing the drive letter,disconnecting & reconnecting the drive, reformatting etc. ) nothing seems to work. I use this SATA drive for storage and for now I have to drag the files down there manually.
I don't know if it's of any importance, but I have nVidia GeForce graphics card onboard.
Has anyone encountered this kind of a problem ?
Thanks Carl

http://www.techsupportforum.com/forums/f10/sata-ide-hard-drives-no-sata-drive-in-my-computer-223799.html
Relevancy 73.96%

Hey guys,

I just purchased a samsung sata dvdrom - this is an upgrade from my old failing IDE drive. My motherboard (an Asus A8V Deluxe) has 2 sata connectors, and another 2 raid sata connectors - the 2 regular connectors are being used up by HDD's...

The question is, can I use one of the Raid Sata's for the dvdrom? (I've tried this already with no luck, I'm wondering if there are any bios settings that'll help with this?)

If this isn't possible, can I plug the hdd's into the raid sata's and not use the raid functionality?

Thanks for your help, I look forward to replies!

A:[SOLVED] Sata vs Raid Sata? DVDRom not recognized

No the raid sata port need a raid driver and won't work with optical drives, you would be able to use the non-boot hard drive on it however and put the DVD drive on the standard sata port. Unless you already have the hard drives in a raid config.

http://www.techsupportforum.com/forums/f10/solved-sata-vs-raid-sata-dvdrom-not-recognized-405390.html
Relevancy 73.96%

I have a DIY box with an Asus P5K-E mobo that provides SATA II ports. I upgraded to a pair of Samsung 850 EVO ssds and naturally got a great speed boost. Now I am getting greedy and thinking about doubling my gains with a SATA III controller card. I have been reading online and I am seeing indications that I may not get much if any speed boost that way. Would those of you experienced with doing what I am contemplating please chime in and tell me if you achieved improvement and if so what card did you use? I am running Windows 10 Pro and Windows 10 Home, one on each ssd, no RAID is involved.

http://www.tenforums.com/drivers-hardware/63164-sata-iii-pci-cards-computer-sata-ii-ports-mobo.html
Relevancy 73.96%

Ok just got finished building my new compy and I am trying to get Xp OS to install I get past the add additional drivers Nvidia Raid recognizing nor Raid not SATA SATA is install single xp hd Class Dr and Nvidia NForce Storage Controller and get xp install is not recognizing SATA Raid nor single SATA hd them to install but when I get to install Xp now quot press enter quot part it comes back saying that it cannot detect a hd and must quit set up I am working on Gigabyte S-series Am mobo GA-M SLI-S ver and using two Hitachi Deskstar hds Gbs ea in a Raid gbs-s SATA This is my first Raid and second Sata install Now onto to what I have done I have followed the manual explicitly ie I followed the steps listed to first enter the system Bios and enabled the Raid controller then saved and went into the Raid bios to create the Raid saved and went back to system bios to select the Raid to a boot device and saved Now as I said Xp is not recognizing the hds and refuses to finish installing I have also tried not undoing everything and just installing without the Raid using just the Nvidia Raid Class Driver that is supposedly required w wo A Raid with the same results I have now redid the Raid array I noticed that when I went into my bios that it also does not seem to recognizing it When I go into Advanced bios settings under Hard Disk Priority it lists the Raid SCSI- Nvidia Stripe Gbs Bootable addins cards However under Standard it is not listed see below IDE channel M drive dvd drive IDE channel S drive cd rw Drive A Floppy Drive B None Also the start up scream where it reads all the drives as its booting up It does not show them either I do not think that this was the case when I first started this journey infact I am almost positive that I saw them listed before either that or I could have been having delusions due to compy stress unfortunately the floppy drive I had was defective so I have been messing around trying to get the Raid drivers on the floppy to install all day yesterday I finally was able to isolate the prob to the floppy drive and replaced temporarily with a working one but I am afraid that my problem might be based on the Bios not seeing my hard drives however since this is my first Raid I am not sure if it should be listed in the Standard CMOS under Drives or not Would clearing my CMOS on the mobo work shortening my pins and then unshortening Help P S the Bios is by mediashield ROM BIOS Thanks to all responses in advance nbsp

A:xp install is not recognizing SATA Raid nor single SATA hd

hmm, strange - have you formatted your hard drives already? Do you have Win XP with SP2 - SP2 is needed to recognize large hard drives.
I don't know how complicated it would be but if all else fails maybe undo the raid configuration format your hard drives (if they are not already) then do the raid thing. I am a beginner so these thougths/ideas might be irrelevant.
ddc22
 

https://forums.techguy.org/threads/xp-install-is-not-recognizing-sata-raid-nor-single-sata-hd.638664/
Relevancy 73.96%

Even though the following is a question I do welcome opinions on what the right answer is to my situation I have an IDE type motherboard The motherboard model number is SV M See http www newegg on (SATA work IDE) Motherboard Solved: Will Sata to Bridgeboard IDE com Product Product aspx Item N E Date accessed - - PM I am not sure but I believe my motherboard was made in Is there a way I can connect a Terabyte Sata Hard Drive to my SV M motherboard I have heard of a Sata Bridgeboard SATA to IDE I have not used one before A matter of fact I have only seen the Youtube Video below How to connect SATA devices in a PATA IDE only PC system https www youtube com watch v BwRClahcUCI Date accessed - - PM They even sell this bridgeboard SATA to IDE online Kingwin SATA to IDE Bridge Board ADP- http www amazon com Kingwin-SATA-Bridge-Board-ADP- dp B SZDOM Solved: Will Sata Bridgeboard (SATA to IDE) work on IDE Motherboard Date accessed - - PM The bridgeboard above above has a out of stars However I am not sure if this bridgeboard would be compatible with my motherboard If there is a better bridge board SATA to IDE that you know of please let me know Do you think the Bridgeboard SATA to IDE would work with the SV M motherboard nbsp

A:Solved: Will Sata Bridgeboard (SATA to IDE) work on IDE Motherboard

They sometimes work and sometimes they don't. To make things worse your motherboard is really old and uses a VIA chipset which had a lot of compatibility issues.

You may want to look into a PCI SATA Controller card instead if you need to use this dinosaur: http://www.newegg.ca/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007863 600022728
 

https://forums.techguy.org/threads/solved-will-sata-bridgeboard-sata-to-ide-work-on-ide-motherboard.1144094/
Relevancy 73.96%

The time has come for me to wipe the hard drive and re-install Windows following a recent to SATA Disk 3 Drive Hard Upgrading from SATA disastrous download that's effectively knocked out my Internet Explorer and Upgrading Hard Disk from SATA to SATA 3 Drive rendered Internet browsing difficult My system has since become unstable and progressively slow and unfortunately for some reason I am unable to Restore to any previous installation As I have loads of files I want to access I've decided get a new Hard Disk and run the original H drive if possible from a SATA drive Docking Station So essentially I would like to know if my Dell DXC will run and support a new Seagate Tb SATA rpm Barracuda My BIOS is Ver dated I have opened the CPU to see Upgrading Hard Disk from SATA to SATA 3 Drive that the current drive connectors appear similar to those Upgrading Hard Disk from SATA to SATA 3 Drive on the SATA Docking Station and think my old drive will fit it However it's now occurred to me that its possible the newSATA drive may not be compatible with my BIOS or Motherboard Any help or comments please Incidentally I have most of my most useful files backed up on an external drive so all hopefully is not lost

A:Upgrading Hard Disk from SATA to SATA 3 Drive

You need a SATA3 port to connect a SATA3 HDD to be fully compatible.

http://www.sevenforums.com/hardware-devices/318314-upgrading-hard-disk-sata-sata-3-drive.html
Relevancy 73.96%

The mother board is an ASUS P5Q? I know the adapter is working because I can hook the cable that comes from the case to another sata slot shut down turn the enclosure on and boot and I have a third hard drive. But that is not how I would like to do it. If the mother board would recognize the enclosure it would give me an icon in the tray to shut it off and I would not have to reboot to back up something.


Thank u for any help
 

http://www.techspot.com/community/topics/how-do-i-get-this-mother-board-to-reconginse-an-e-sata-to-sata-adapter.142200/
Relevancy 73.96%

What i'm wanting to do is with the side off my computer hook up a hard drive to sata 2 or sata 3 to see data on hard drive without rebooting computer. 
i use to be able to do this on a 780 but i upgraded to this 9010 and can't get it to do what i use to do on 780.

http://en.community.dell.com/support-forums/desktop/f/3514/t/19996589