Windows Support Forum

Firmware update question on ssd

Q: Firmware update question on ssd

When I receive this drive will the Firmware have to be updated before use or, can that be done later on if needed? Thanks! SAMSUNG 840 Series MZ-7TD120BW 2.5" 120GB SATA III Internal Solid State Drive (SSD) - Newegg.com

Relevancy 100%
Preferred Solution: Firmware update question on ssd

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Firmware update question on ssd

Hi,

You can update the firmware before or after, I would suggest it would be better doing it before

This version improves write performance, which is version 1.0,
click on firmware to view (you may be up-to-date):

http://www.samsung.com/uk/support/model/MZ-7TD120BW-downloads

Hope this helps

Cheers

Dave

http://www.sevenforums.com/hardware-devices/301539-firmware-update-question-ssd.html
Relevancy 18.49%

I've done no overclocking, no advanced work whatsoever. Every time I try to google my issue, all of the solutions seem to be based around the person with the issue overclocking their system thus causing high tempuratures. This is not that issue.

On to the actual problem, my motherboard reports temperatures of 69c when running any program that takes any worthwhile amount of system resources (and some that don't), in particular, most games. CPU and GPU tempuratures seem far lower, around 30-40c. Assuming the sensor isn't to blame (and it isn't, if the feel of the case is any indication), are there any reliable ways to lower MB tempurature with simple BIOS and power settings?

Running an old F1a55-M (FM1) on Win 7 Home Premium, SP1.

EDIT: The motherboard idles at 47, which also seems high. I've changed locations for better airflow several times and wonder if I just flat-out need a larger case.
 

A:Question re: system temperatures

Fans running, dust?
 

http://www.techspot.com/community/topics/question-re-system-temperatures.217445/
Relevancy 18.49%

Hey,
I recently decided I'm going to start using my old laptop again. I swapped the hard drive for an SSD and I'm quite pleased with the performance boost that got me. I am now looking for a ram upgrade from 2gb to 8gb.
I have a Dell inspiron n4010.
I went to crucial's website and did the system scan. The scan said that this would fit my needs.

Unfortunately, crucial doesn't ship to me. I'm forced to look elsewhere. I looked for something similar on another store's website. My question to all the experts out there is: will 2 of these work with my laptop and get me the 8gb of ram I need?
thanks for the help!
 

A:Quick ram upgrade question

Yes. The specs are exactly the same. Over the years I have used both Kingston and Crucial many times for memory upgrades and both are excellent.

You can also do a memory scan at Dell's own website. Just don't buy what they offer because they'll tell you to only buy genuine Dell memory blah, blah, blah. The Kingston will do you quite fine.
 

http://www.techspot.com/community/topics/quick-ram-upgrade-question.216718/
Relevancy 17.2%

AMD has launched their first WQHL-certified Catalyst graphics card driver update since December 2014, bringing a heap of new features and performance updates across the board, as well as the usual array of bug fixes.

Read more
 

A:AMD launches major GPU driver update: Catalyst 15.7 WHQL

I have played with the CFX and Freesync support on the Acer 1440p 144hz monitor. Works great and makes me want to actually own a Freesync monitor now...
 

http://www.techspot.com/community/topics/amd-launches-major-gpu-driver-update-catalyst-15-7-whql.216359/
Relevancy 18.49%

I am planning on building a small form factor PC but it will need RS232. I don't know for sure if there will be room for an add on card for the RS232. Is there a usb to RS232? If so, will it work as good as an add on card?
 

A:RS232 Question

Check out this link: TRENDnet USB to RS-232 . I do not personally own one, but I have used them at my job and they seem to work pretty well. You may have a driver issue, depending on the OS you will be using, but for the most part it works.
 

http://www.techspot.com/community/topics/rs232-question.215588/
Relevancy 18.92%

As seen on this site, the previous USB 3.0 drivers were v3.0.4.65 for Intel 8/9 Series Chipset. On Gigabyte's website for the Z97 boards, they also list USB 3.0 v3.0.4.65 as the latest for their boards. Now my question is, why on Intel's Download Center, is USB 3.0 v3.0.4.65 listed as Intel NUC drivers? Intel forum staff claim that version is for Intel NUC only, but it doesn't seem that way.
 

http://www.techspot.com/community/topics/usb-3-0-question.214845/
Relevancy 18.06%

Hi, Guys (And Gals) I'm attempting my 1st PC build and HAVE used the various online power supply calculators... however I'd like to hear some feedback from you all. No matter where I look online I always like to come here to be sure. My specs for the build are as follows:

MoBo: GIGABYTE GA-F2A68HM-H FM2+ USB 3.0 MATX
Amd A6 5400K 3600Mhz Blk Edt 1mb 65w Socket FM2


Video Card: XFX RADEON R7 240 2GB DDR3 LOW PROFILE
RAM: ADATA XPG V1 DDR3 1600 4GB

HDD: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G

I would really like to use one of the 350W or 400W power supply I stripped from my previous PC's. I'm thinking of hooking it to an HDMI or VGA projector eventually though (Haven't bought it yet) Can I get away with one of these and play a game like World of Warcraft? or do I need to order something like the
SolidGear 650W PS2 ATX Power Supply on Tiger Direct?

Thanks in advance for any advice & thoughts
 

A:1st Build Power Supply Question

Over engineer the PS;

Calculate the actual needed power,

add a fudge factor and

multiply by 1.5.
Then round up to the next commonly available size
 

http://www.techspot.com/community/topics/1st-build-power-supply-question.213326/
Relevancy 18.49%

Hey guys,

I have question about backbone networks. Need Help!

If an organisation has 3 departments.

Key servers are in different departments ? so a user from 1 department X reads and writes to file servers in another department Y. And both users access mail from a server in department Z.

The traffic and broadcast storms originating in one department is causing bandwidth saturation in other departments.

The core of the network is slow and is unable to meet the response time requirements of various critical business applications.

What is the solution based on core technology design, LAN technologies and design solutions to address inter-departmental traffic issues?
Thanks!
 

A:Question about backbone networks

The traffic and broadcast storms originating in one department is causing bandwidth saturation in other departments.Click to expand...

major faux paux. Broadcasts should not go beyond the current subnet.

I would guess

you're departments are co-located in the same building
and all are on one subnet
For large companies per the above, likely the 192.168.x.y is insufficient and your lan is using a subnet like 10.x.y.z for ease of network administration.

Broadcasts should be limited to resource online/offline and contained within the network segment where the device is attached. Users / systems in HQ do not need the status of a printer going offline the the shipping department.

Suggestions:

segment the departments into unique subnets
then add static routes between them according to their need
eg: the company domain server would be needed by all (dept <-> srvr)
including the email and directory system.

FEW departments need access to the sales group or its data

You need to analyze the departmental workflow to begin this project, and implement one network change at a time.
 

http://www.techspot.com/community/topics/question-about-backbone-networks.213243/
Relevancy 49.88%

I have a Razer BlackWidow keyboard Recently I downloaded and installed the latest version of Razer s Synapse on update keys swapped firmware Razer BlackWidow to try and fix this issue I was having with my Naga Lo and behold my Naga issues Razer firmware update swapped keys on BlackWidow were fixed but another problem emerged The new version of Synapse added support for the BlackWidow and also upgraded the firmware But after the upgrade my Windows and Alt keys have been swapped so when Razer firmware update swapped keys on BlackWidow I press one I get the other The only way I ve been able to fix it so far is to use SharpKeys to switch the keys back around but when I connect another keyboard that keyboard now has its Windows and Alt keys swapped It s not that big Razer firmware update swapped keys on BlackWidow of a deal but I do swap to a quieter keyboard late at night from time-to-time and I would really prefer to have it fixed without having to rely on a workaround like this I ve check around and I can t find any information about this issue and Razer s support website is completely useless as usual Likewise I haven t had any luck so far with downgrading the firmware either Does anybody have any idea on what I could do particularly other BlackWidow owners nbsp

A:Razer firmware update swapped keys on BlackWidow

Can't you just go into Synapse and assign the Windows key to the Alt key and vice versa? All the keys are programmable and hopefully this wouldn't affect your other keyboard.
 

http://www.techspot.com/community/topics/razer-firmware-update-swapped-keys-on-blackwidow.182990/
Relevancy 17.2%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 18.92%

Hey guys I was wondering if I bought one of these if it would work it s a dvi-d to vga adapter The site says quot the adapter only works if your computer AND your monitor both support digital and analog quot I bought a new GPU but now I can t connect my vga output VGA question to DVI-D from my DVI-D to VGA question tv to my videocard There is a vga port but it s already occupied for my old crt screen On my older GPU I had a DVI-I port so I used a DVI-I to VGA adapter to connect the tv But now I ve got VGA HMDI and DVI-D ports I don t use the hdmi on my tv because the input lag is terrible cheap tv So I want to buy this adapter to fix my problem but I ve read DVI-D is only digital I m kinda confused on this My GPU and tv both support digital and analog as the site requests so is this gonna work or is it just a scam This also made me wonder why the hell they don t just put DVI-I ports on all videocards it s supports both analog an digital Which is far more convenient than having only a digital signal or am I missing something here Thanks for reading nbsp

A:DVI-D to VGA question

I've also found this adapter/converter. It's more expensive but it looks more trustable than the 1st one I posted.
 

http://www.techspot.com/community/topics/dvi-d-to-vga-question.211374/
Relevancy 17.63%

The impending launch of DirectX 12 is one of the more exciting things to happen in PC gaming in recent years. Many people are eager to see how the low level API will improve the performance of games that implement...

Read more
 

A:You can now test DirectX 12 yourself with latest 3DMark update

This is way windows is doomed. DirectX 12 should be available for win 7-10, but MS is so greedy, they cant seem to understand why they are disliked and windows will evientaly be destroyed by Google. Just look at there market share. I betting big on SteamOS, and once it takes off, I will take the jump. Windows is now to bloated, and with greed, I hope all backers back Vulkan. DX12 on Win 10 only has officially broke the camel back.
 

http://www.techspot.com/community/topics/you-can-now-test-directx-12-yourself-with-latest-3dmark-update.210768/
Relevancy 17.2%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 18.49%

I'm looking for an inexpensive router, any suggestion? The current router is downstairs, I plan plugging it in upstairs to boost the wifi. TIA
 

A:Router question

ASUS and TP-Link have some pretty good routers.. Do you plan to have Consoles (Xbox One, PS4, Wii U) using the network?? If so just ensure the router will properly support it as some older models may not work well with them.
 

http://www.techspot.com/community/topics/router-question.208909/
Relevancy 18.49%

I am running Windows 7 Home Premium 64 bit SP1 AMD E 300 with Radeon HD 6310 Graphics.
I would like to be able to play a few of the newer PC games but when I try they seem to stutter and do not run smoothly.
Do I need to install a better graphics card? If so can someone recommend what kind I could buy and install without a high cost?
Thank you for any advice.
 

A:Upgrade question

The AMD E-300 (codename Zacate) is a dual core processor for small notebooks and netbooks. It offers a relatively powerful integrated graphics card and a single ...Click to expand...

It appears you have a portable device that likely doesn't have upgrade options. If your device maker doesn't list upgrade options on their website, you can likely scratch this idea.

Portables (Phones, Tablets, Netbooks, and Notebooks) are not designed with upgrading in mind. They are small and very limited with cooling capabilities. And most of the time everything is integrated in small form factors and can not be replaced.
 

http://www.techspot.com/community/topics/upgrade-question.209190/
Relevancy 18.49%

Ok first I know this is the hardware section but because of the nature of my question this is the best place I feel it should go I am upgrading my motherboard Upgrading cpu question mobo and and CPU from Asus M A TD-V EVO USB Xtreme Design ATX AMD Mobo and an Amd Athlon II x Ghz to ASRock Z Extreme LGA Intel Z HDMI SATA Gb s USB ATX Intel Motherboard and a Intel Core i - K Sandy Bridge Quad-Core GHz GHz Turbo Boost LGA Upgrading cpu and mobo question W Desktop Processor Intel HD Graphics Now all hardware does work but my issue seems to be a software issue more likely than Win bit which I need to get a hold of the disc my brother has was a family pack thing Anyway my question is pretty simple I Upgrading cpu and mobo question hope Without doing a fresh install of Win bit is it possible in any form to get the new mobo and cpu working like maybe using the repair method or installing over the current installed win Os so I do not have to back-up a ton of data and re-install lots of programs Also is there Upgrading cpu and mobo question any other work-around that might help I do have a Tb external Hdd I plan to backup my C drive with either way but it would be great if I did not have to do a fresh install Again sorry if this is in the part of the forums nbsp

A:Upgrading cpu and mobo question

Just back it up, bite the bullet, and reinstall Windows to get things right. An intel mb is not going to work right with the AMD drivers installed.
 

http://www.techspot.com/community/topics/upgrading-cpu-and-mobo-question.208395/
Relevancy 18.49%

Hello, I was recently given a Dell Dimension 2400 from a friend. It had absolutely no upgrades, however I had old parts sitting around and I gave it a bit of an upgrade. I put in 4gb of ram (however found out it had only supported up to 2gb, so I had to remove a card) and added a Visiontek Radeon 9200 graphics card in. Now, I have two processors here that look like the might fit, but I wasn't sure. So, I was hoping to get a second opinion from someone who has a bit more experience with this than I do. I have two spare processors

one of them is a Pentium 4 3.00Ghz (http://ark.intel.com/products/27479...g-HT-Technology-2M-Cache-3_00-GHz-800-MHz-FSB)

the other is a Pentium 4 1.6Ghz (http://ark.intel.com/products/27424/Intel-Pentium-4-Processor-1_60-GHz-256K-Cache-400-MHz-FSB)

Would either of them work? Also, would upgrading to windows 7/vista increase the support for ram? Thank you.
 

A:CPU upgrade question

Socket details:

Pentium 4 3.00Ghz is LGA775
Pentium 4 1.6Ghz is PPGA478
That is two different architectures.

Specs for Dell Dimension 2400




Intel Pentium 4 that runs at 2.2 or 2.4 GHz
internally and 400 MHz externally, or 2.266, 2.4,
2.53, 2.66, 2.8, or 3.06 GHz internally and 533 MHz
externally.

Intel Celeron that runs at 2.0, 2.2, 2.3, 2.4, 2.5,
2.6, or 2.7 GHz internally and 400 MHz externally.Click to expand...

Please note this would be PPGA478 architecture not LGA775.

What CPU is currently in the computer?

.
 

http://www.techspot.com/community/topics/cpu-upgrade-question.208387/
Relevancy 18.49%

Greetings. I have an Asrok Z77 Extreme 6 Motherboard.

I currently have an I5 3570K in there. I believe my Mobo is LGA 1155.

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.

Not sure if I will see any real increase in performance. I over clock the I5 to 4.2.

Any advice is welcome.
 

A:Question about my motherboard

Larsenex said:





Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.Click to expand...

Sorry, no. While your motherboard does have socket 1155, the processor i7 4790K is socket 1150. You'll need a new motherboard.
 

http://www.techspot.com/community/topics/question-about-my-motherboard.208311/
Relevancy 18.06%

This ink cartridge http://www.epson.com/cgi-bin/Store/jsp/Product.do?BV_UseBVCookie=yes&sku=T048120[1]

Is labelled as "T048120-S" on some online stores... others it's labeled just as "T048120"

What does the "-S" mean? single cartidge?
 

A:Question about Epson printer ink model #

Probably means standard capacity.
 

http://www.techspot.com/community/topics/question-about-epson-printer-ink-model.207580/
Relevancy 17.63%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
 

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-after-hardware-driver-update.206983/
Relevancy 18.49%

Hi all. So I was wondering if you guys had any opinions on gaming headsets for pc. My headphone jack for my computer isn't working so I don't think I can use any wired headsets (if I'm wrong on this please let me know). So I was looking into wireless ones, preferably $100 and under. The three I narrowed it down to were the corsair 2100, turtle beach px4 or 5 (from amazon or ebay) and the PDP afterglow kral. Anybody have any opinions on any of these ones or any other ones you would recommend? Thanks for any help on this!
 

http://www.techspot.com/community/topics/pc-gaming-headset-question.207127/
Relevancy 33.54%

Hi all,

EEPROM is a hardware piece that the BIOS (which is a code) is inside it. What about some piece named firmware? Is there any independent device named firmware in PC? If so, what does it do?
 

A:EEPROM, BIOS & firmware

A firmware is a structure code, embedded and instructed written languages that is designed by programmer to communicate with devices attached to the particular device. Most especially of our input devices has firmware inside talk of mouse, keyboard, flash drive e.t.c
 

http://www.techspot.com/community/topics/eeprom-bios-firmware.206033/
Relevancy 18.49%

Hey, I wanted to update my cpu stock heatsink to something new sense this one sucks and I was gonna get
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103099
for my cpu http://www.newegg.com/Product/Product.aspx?Item=N82E16819113348
but I wasn't sure if that huge cpu heatsink would fit in my case, could anyone give me advice whether it will or not I am still new to building, Thanks!
This is my case - http://www.newegg.com/Product/Product.aspx?Item=N82E16811147166
 

A:Cpu heatsink question

You can try to use partpicker (needs a valid email to save parts list) to test your builds. a warning will show for any possible incompatibility.




https://pcpartpicker.com/parts/partlist/Click to expand...

based on newegg product, it seems able to handle 'full sized cpu coolers'




Rosewill Line-M
This review is from: Rosewill LINE-M Micro-ATX Mini Tower Computer Case, Dual USB 3.0, come with Dual Fans, Support up to 4 Fans, 12.5" card-Retail

Pros: Size, Appearance, USB 3.0 Front Panel. I own two of these one with fx8350 and one intel 4770 both with r9 280x gfx cards. Cable managment is tough but I expected that with the amount I packed into this form factor. Keeps my gfx cards around 70 degrees on stock settings. Fits full size CPU coolers. This is just about the perfect size for a computer case in my opinion.
Cons: bent the back panel slightly removing cut outs for PCI and PCIe mounts other than that no complaints really.
Other Thoughts: Get a modular PSU for this case.Click to expand...

based on partpicker:




http://pcpartpicker.com/p/Bb4TJxClick to expand...





Compatibility Notes
Unable to verify the Rosewill Line-M MicroATX Mini Tower Case and the Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler are compatible.Click to expand...


 

http://www.techspot.com/community/topics/cpu-heatsink-question.206154/
Relevancy 18.49%

My gaming computer turned in February and now that it s no longer under warranty things are going wrong This week in the middle of a project the machine rebooted on its own It restarted but shortly after did replacement PSU question it again and again I still have free tech support and two tech s offered help on what could be causing it First I replaced the cooling system thinking the PSU replacement question one installed failed and the cpu was overheating doing it It still rebooted I purchased software called Hardware Monitor to see if the power supply voltage was bad but it seemed ok then I swapped out the memory in case there was a bad stick It still rebooted My support tech feels it still could be the power supply and suggested I replace it I was told that I would need to buy the exact model and that buying any other would require a complete rebuild of my PC Since the computer is years old the power supply isn t sold anymore I was wondering if it s true that my computer would need to be completely rebuilt if I bought a PSU that wasn t the same The power supply is a Enermax Galaxy EVO w model egx ewt My computer was made by Digital Storm More system details available if needed nbsp

A:PSU replacement question

1. What hardware do you have in your system that needs such power? We need your hardware specs: CPU, GPU, amount of RAM, drives, etc.
2. Why does he believe a complete rebuild is necessary because that particular psu isn't made anymore? Is it a special size? If your case is to standard specs then see point #3.
3. Who is this support tech? Does he work for Digital Storm by chance? Check these psu's that will more than meet your power needs: http://www.newegg.com/Product/Produ...07657 600479299&IsNodeId=1&name=1200W - 1499W
4. Before you spend any $ find someone who has a digital volttage meter and test your psu to see if that is really the cause.
 

http://www.techspot.com/community/topics/psu-replacement-question.205941/
Relevancy 18.49%

Hi guys,
My wife's Galaxy was hacked and sent emails out to her entire contact list.
The message contains a link that may provide a clue to who did it.
Is there a way to possibly isolate and open the link to view it without letting whatever it is destroy/spread/etc?
 

http://www.techspot.com/community/topics/odd-smartphone-question.204534/
Relevancy 18.06%

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping
 

A:Upgrading CPU, question about motherboard compatability

Vidosoli said:





Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping Click to expand...

No, that motherboard is LGA 1156 while the i5 4670 is LGA 1150. You would need a new motherboard to go with that CPU>
 

http://www.techspot.com/community/topics/upgrading-cpu-question-about-motherboard-compatability.204453/
Relevancy 18.49%

I am using a corsair H60 liquid cooler. Am I going to get better cooling results by putting the radiator on the top of the case and sucking room temp air in through the radiator and then pushing it out back with another fan(plus a front fan intake also). Or am I not going to notice anything by just having my front intake fan and push the air out through the radiator with a fan? Thanks.
 

A:Cooling question

It is probably best to push air out of the case with the radiator since that will probably lessen the amount of dust that comes into the radiator. That is my opinion though. Maybe someone else thinks otherwise.
 

http://www.techspot.com/community/topics/cooling-question.204467/
Relevancy 18.49%

Hello I am looking to upgrade my current pc will post specs below and am wondering what will give me the most bang for my buck as my budget is limited a $600 with budget only Upgrade question and I may not have the funds to upgrade again for a while Current PC specs Intel Core i LYNNFIELD GHz GB ram and a Geforce EVGA GTX ti GB I was set to order a new MB ram cpu and another GTX ti to run sli My new pc would have been this was all within my budget Intel Core i - K Processor GHz GB ram ASUS Z PRO LGA Motherboard Geforce GTX ti GB x Ive had some people recently tell me the most bang for the buck would be just spending almost all of it on a video card as thats where the bottleneck for most games is I can see that being true but my cpu ram and mb are about years old I still think Upgrade question with only a $600 budget id get more performance for the overall package but im far from an expert and could use any advice and or suggestions Also im a but Upgrade question with only a $600 budget hung up on going from a I to a I but the newer cores have to make up for whatever difference there may be right Thanks and sorry if I put this in the wrong spot nbsp

A:Upgrade question with only a $600 budget

Does your current system not support SLI?

And does you PSU provide enough power for the two 660Ti?
 

http://www.techspot.com/community/topics/upgrade-question-with-only-a-600-budget.203890/
Relevancy 18.49%

Hi Everyone,
I'm new here so I'm not very aware of the things going on. But I'm desperately posting this because I want some good answers and advice regarding my PC. And I'll appreciate any response.

Now here's my question. I recently bought a PC but not the kind you'd want as a gamer. I want to know if it's possible for me to replace its current Video card to Higher one, I mean a Graphic card capable for gaming and compatible for my system. Also about the RAM, I want to know if it's OK for me to change it to like 16g? My current Video card is NVDIA GeForce GT 620 1g. -


 

A:Just a Simple Question :)

It mainly depends on your power supply, motherboard, and your computer's case on whether you can upgrade your video card. Chances are your power supply will be the most limiting factor on your machine. You could bump up to something like a 750 Ti without much concern about the PSU but anything higher and you'll likely need to change that part out also.

As far as the RAM goes it's all motherboard and what you've already got installed. You might end up having to remove some of your memory modules in order to put higher capacity ones in. That shouldn't be an issue with the Core i3 though - 16GB should be easily attainable.
 

http://www.techspot.com/community/topics/just-a-simple-question.203779/
Relevancy 18.06%

So I built my system using this SSD caching It works really well My hard drive is terrabyte and my Cache drive is a gig ssd Lately while a Intel Storage Rapid Technology question.. playing Star Wars the Old repubic I have been freezing Intel Rapid Storage Technology a question.. in game This freezing completely locks the computer I run Teamspeak and I can still push to talk and my friends can still talk and I can talk to them via this during the freeze What is odd is Cnt alt delete will not bring up the control panel to allow me to kill the game I am just stuck Normally I would say this is a Video driver issue I did cleanly reinstall the latest Nvidia driver and this will still occur sometimes Now when I disable RST I never get the problem I can play and play and play When I reactivate RST to maximized I can still play but its like a timer After about or days the Freeze will happen So my RST question is has the driver been updated since when I built my computer and is it possible to update this driver now without having to re-install Windows and all my programs If I am left with having to re-install I am likely to just fork over the money and just buy a gig SSD and keep Windows and or of my favorite games on it and use the Terrabyte drive for Music videos and storage nbsp

A:Intel Rapid Storage Technology a question..

Yep, there's 2013 versions for Win7.

https://downloadcenter.intel.com/Se...=Intel®+Rapid+Storage+Technology+(Intel®+RST)
 

http://www.techspot.com/community/topics/intel-rapid-storage-technology-a-question.203611/
Relevancy 18.06%

CPU:AMD FX-8320
Motherboard:ASUS M5A97 R2.0
OS:Windows 8.1 64-bit

I hardly know anything about the BIOS so I am asking you this:
Will I need to update my BIOS and if so how to do that?
Am I going to update it to the latest version(2103) or the version when the processor was first compatible(1006)?

Please help, I do not want to make a mistake when updating so please provide a detailed explanation ! ! !
 

A:BIOS update

Some might say updating the BIOS is not worth the risk unless you have a reason to chance it. On the other hand I've never had a BIOS update go badly. BIOS updates are not that difficult to do. But there is always a risk of the update failing. In the off chance of failure, the motherboard will be bricked. There are motherboards that come with a second BIOS for failsafe. I don't know if the failsafe can be used under a bricked board, I will assume it can until I hear otherwise.

There are three ways to update that I am aware of. All of which may not be available depending on motherboard model and age of system.

Within the Operating System (I've used this method but for awhile it was advised against)
You will need to download BIOS Update application. The application will download and install the new BIOS.

Within the BIOS
Within the BIOS there is an update facility. You will only need the new BIOS. (My BIOS will only update from a USB stick.)

From DOS utility
Not only will you need to download the new BIOS, you will need to download the flash utility that is designed for the update.

I recommend updating from within the BIOS (assuming you have this option). Download the new BIOS to a USB stick and then boot into the BIOS. Browse around to find the update facility and the rest is self explanatory.
 

http://www.techspot.com/community/topics/bios-update.198931/
Relevancy 17.63%

Hi there
need to know if I can upgrade my graphics card for upgrade to windows 7.
current graphic card:ati radeon 9200 se 128mb ddr tvo
computer :fujitsu siemens scaleo 600
motherboard :microstar ms-6585 2.oa
power supply:dc output 250w
thanks so much.
learner1
 

A:Graphics card update to host windows 7

I don't know if you CAN upgrade your graphics card, but:

You most likely don't NEED to.
It's not really a good idea to upgrade at all. Those parts are old as dirt and you won't find anything cheap that'll fit.

 

http://www.techspot.com/community/topics/graphics-card-update-to-host-windows-7.202568/
Relevancy 18.49%

I have a Lenovo Thinkpad T430 that I configured with 4 gigs of RAM (budget constraints at the time). It is in single channel (Lenovo never mentioned this tidbit of info; the sad part is both my wife's and daughter's 1st Generation Thinkpad Edge came with 4 gigs of dual channel at 7 timings). My CAS Latency is currently 11.

I am wanting to double the RAM to 8 gigs dual channel and I have the option of CAS Latency at either 9 or 11.

This laptop is used for business such as Office work, internet, email, streaming video, etc. In real world applications would I even notice the difference between my system running either 9 or 11 timings?

Thanks.
 

A:CAS Latency Question

I dont think it makes much of a difference. But of course, lower latency is better, but it doesnt mean it will bring a big performance boost. The boost will be miniscule.
 

http://www.techspot.com/community/topics/cas-latency-question.201710/
Relevancy 18.06%

So newegg is offering the Acer 29" B6 B296CLbmlidprz IPS monitor for about 350. Seems like a pretty good deal but I can't find many reviews on it. I was wondering if anybody had any experience with this monitor and/or if you guys have better options for someone who is looking for an IPS monitor below 400 bucks. I want to game with it as well as do some 3d modeling and photoshop work. So I need reasonable response time for gaming. I was also looking at the HP ZR2440w and was gonna get that until I saw this deal on newegg for a larger monitor. 24" models are fine but if there are good deals on some 27" inch ones then I would be interested in those as well. Any suggestions? Thanks.
 

A:Question on Acer 29" monitor and other monitors

Heres the link for that monitor.
http://www.newegg.com/Product/Product.aspx?Item=9SIA24G1GC2421
 

http://www.techspot.com/community/topics/question-on-acer-29-monitor-and-other-monitors.201698/
Relevancy 18.49%

I have to be at a meeting in about 2 hours. We are on the beach in South Carolina. Our ISP, Hargray, constantly goes out. We are a condo association and have a group connection with little radio connectors in each building. We are more out than on line. I did a speed check and get a dl of 11.24, and an ul at 1.18. Does this matter in affecting my internet connection? I have an ipad and laptop and both get get nada. Please give me something to take to my meeting to make an intelligent statement. Thank you.
 

A:Internet Question Needs Quick Help

How did the meeting go?
 

http://www.techspot.com/community/topics/internet-question-needs-quick-help.200367/
Relevancy 17.63%

I have no idea why this happened, after the update none of the ports on my computer work after booting into windows. bios was updated before this and all was fine. checked in bios if ports were enabled. still no joy. help!!!
 

http://www.techspot.com/community/topics/all-usb-and-ps-2-ports-dead-after-msi-motherboard-driver-update.200108/
Relevancy 18.06%

I have a 128gb samsung SSD. I was wondering what updates I can remove to get more space on the SSD because windows7+all updates are currently using half of the SSD space and somehow only 119gb of the SSD space is displayed so I'm guessing that 8gb is reserved or something.
I'm currently removing the extra languages and those are giving me and extra 5,5gb space
 

A:Windows 7 Ultimate updates and SSD question

Somehow I think you have more installed than Windows and updates. Internet Explorer, Bing Bar, and Bing Desktop are the only updates I have hidden. All other Windows Updates have been installed. I wouldn't put all the blame on WIndows, if you have an install using 60GB.



​Anyone with more than 8GB memory and still has Pagefile and Hibernation, by default has more than 16GB used by these two files alone. I recommend using them only if needed. I personally don't need them and have removed them both.

Check and see if you have a Hibernation file. If you don't use hibernation features, the file can be removed.




Windows 7 ? Delete Hibernation File (hiberfil.sys)
To turn off or disable hibernation, type the following command at the prompt:
powercfg ?h off
This will disable hibernation and will remove the hiberfil.sys file from your system.Click to expand...

Monitor your memory usage and if you have more memory than you ever use. The Pagefile can be minimized. I currently have mine turned off, with 8GB installed. But caution though if you turn the Pagefile off, Windows will not be able to compensate for a shortage of memory and the Windows session will crash. While I am comfortable not using a Pagefile, I do not recommend others do the same until they are comfortable doing so. I recommend lowering the Pagefile size to 1GB, and if Windows needs more, the size will be automatically adjusted.
 

http://www.techspot.com/community/topics/windows-7-ultimate-updates-and-ssd-question.200043/
Relevancy 18.49%

Hi there Tech Forum thanks in advance for your help - I have a question about a LAN and stuff There is a modem and a wireless router with LAN ports In one of them there is conected also a switch Network LAN Question with LAN ports - Some weird things have been going on I always get a wireless connection so LAN Network Question no problem there Issues appear with the wired network On one hand I had many times an unidentified network a x x x ip and no LAN Network Question network Nothing changed in configuration on my box or the router and got to connect at MB s while if connected through wi fi I got LAN Network Question more than MB s From a moment on again unidentified network and no signal in the adapter a yellow light would blink quick So now after touching the cable and a little bit of despair not driven to the computer by the way I have a full conection by lan and by wi fi both at a good speed AND weird for me a green light on and the same yellow blinking - So main questions are - What does the green light ON not blinking means - Could there be a difference due to the cable manipulation - Is there a gost inside my router D Thanks a bunch to all of you I try my best to understand computers so now I am happy with the connection but curious on the rest - Regards nbsp

A:LAN Network Question

How new are these devices? Are you using new 'patch' cables? Is DHCP running on only one of the devices? Seems weird that "touching the cable" caused a change.

1. The LEDs differ, but usually one signifies a connection [on/off] and the second signifies activity [blinking]
 

http://www.techspot.com/community/topics/lan-network-question.199370/
Relevancy 18.06%

Hey guys, I've been looking for a GFX card to upgrade my HD6870. I've already decided to go with an AMD R9 280X, I just don't know which model to buy yet.

Right now, the MSI 280X seems like the best option to me. But I use 2 monitors and the MSI 280X only has these connections:
Dual-link DVI-I x 1
HDMI (version 1.4a) x 1
Mini DisplayPort x 2

The monitors I use are a BenQ XL2411T (144hz) and a NEC LCD22WV (old).
The BenQ has: D-sub / DVI-DL / HDMI x 1
The NEC has: VGA 15 pin D-sub x 1

Would I be able to use my NEC screen with the MSI 280X and use my BenQ at the same time, with 144hz refresh rate? I read somewhere that a newer type of HDMI supports at least 120hz, though I couldn't find a clear answer to that. I am willing to purchase converters if needed.
 

A:Simple question regarding GPU - Monitor connections

I'd connect BENQ via DVI, then use miniDP > DVI > VGA adaptors for the NEC.

Also I don't know what games you are playing, but you're not going to get 144fps @ 1920x1080 with a R9 280x on most games.
 

http://www.techspot.com/community/topics/simple-question-regarding-gpu-monitor-connections.199311/
Relevancy 18.06%

This is not intended to be a sob story but I just want you to know what it is all about. I have a niece that is slowly deteriorating from MS. She does not have much that she can do anymore but one of her enjoyments is playing a game called WSOP Challenge (world series of poker challenge). Right during Christmas the game stopped working and Sprint can't seem to help her get it back on her phone. She called me asking if I knew what to do and I tried but could not find any info on what she needed to do to get it working. Sprint told her to delete it from her phone which was not a good idea because I have found no where that she can download it from and put it back on her phone. Would anyone be so kind to give me some advice on how to fix her problem. Time is not on her side but what she does have left I want it to be very enjoyable. Thanks so much for your help.
 

http://www.techspot.com/community/topics/lg-rumor-phone-and-game-question-very-important.199220/
Relevancy 18.49%

Recently bought the GPU and realised that my current power supply wasn't quite good enough, so I went and bought an "emergency" PSU locally. Specifically an 850w PSU by Power Zone.

Now the GPU is amazing but sometimes I struggle to run some games on full settings, such as Assassins Creed 4, Shadow Warrior, etc. , and obviously I bought the card with intentions of running games on ultra with decently good FPS.

Now to the point, is it the PSU that could be holding me down? The recommended wattage on the AMD site stated it to be 750w. and I do believe that my system specs are pretty much good enough.

I'd also like to point out that a friend recently got a Radeon 7950 and claims to run above mentioned games on full settings with no problems. Again so he claims

Also included dxdiag info
 

A:Question about AMD Radeon 7990

May we ask what you and your friends PC specs are? It could be other variables at fault.

Never mind! Just noticed the specs are listed in the txt file.
 

http://www.techspot.com/community/topics/question-about-amd-radeon-7990.198993/
Relevancy 18.49%

For Christmas I got another mm case fan aerocool shark rpm and I tried mounting it at the top of the case to suck out hot air as I have intakes and exhaust already but I couldn t seem to get the right screws to screw it in at the top my case aerocool fan cooling Case question strike x gt came with long screws for the top of the case but they are too thin to screw into the fan So instead I mounted the new fan on the side door on the top fan slot by the CPU as an intake and today when I played a new game that I got for Christmas BF I noticed the CPU temps would get rather hot I am using the stock intel cooler bear that in mind I was getting a max temperature of about degrees C after a roughly Case fan cooling question hour gaming session Would I benefit from making the new fan an exhaust by the CPU or would I be better off or is there a secret way of mounting a fan up there at the top as an exhaust that I son t know about as I imagine that way would be the best way to do things Also my graphics card could handle BF at all max p with FPS Thanks EDIT - To clarify I have intakes at the front one rear exhaust and the new fan as an intake on the side door by the stock CPU cooler nbsp

A:Case fan cooling question

hopgop1 said:





For Christmas I got another 120mm case fan (aerocool shark 1500 rpm) and I tried mounting it at the top of the case to suck out hot air as I have 2 intakes and 1 exhaust already but I couldn't seem to get the right screws to screw it in at the top, my case (aerocool strike x gt) came with long screws for the top of the case but they are too thin to screw into the fan. So instead I mounted the new fan on the side door on the top fan slot by the CPU as an intake and today when I played a new game that I got for Christmas (BF3) I noticed the CPU temps would get rather hot (I am using the stock intel cooler, bear that in mind) I was getting a max temperature of about 80 degrees C after a roughly 2 hour gaming session. Would I benefit from making the new fan an exhaust by the CPU or would I be better off, or is there a secret way of mounting a fan up there at the top as an exhaust that I son't know about as I imagine that way would be the best way to do things. Also my graphics card could handle BF3 at all max 1080p with 60+ FPS. Thanks. EDIT - To clarify I have 2 intakes at the front, one rear exhaust and the new fan as an intake on the side door by the stock CPU cooler.Click to expand...

With stock coolers, the fan on the intel cooler is pulling the air through the heat sink off the CPU and into the case away from it. By putting a fan blowing air down on the CPU, you are pushing the air back onto your cpu thus keeping the hot air hovering around it.

I would suggest swapping to exhaust.
 

http://www.techspot.com/community/topics/case-fan-cooling-question.198885/
Relevancy 18.92%

I have a Compaq dc5750 that would of had pc 5300 ram but it has none atm, but I have some pc 6400 will it work? I mean all the other specs are ok, but it's pc 6400. thx
 

A:Ram question

There is only one way to find out. That is to try it. If it does work it will not run at 6400 unless the motherboard supports that speed. If the motherboard only supports 5300, the memory modules will down clock to 5300.
 

http://www.techspot.com/community/topics/ram-question.198686/
Relevancy 33.11%

There is a post here about the good old ADAPTEC 1205SA card. But the links in the article do not work. No difference between 1205 and 1210? I know 1210SA is an old card. But on the website of silicon image, chipset 3112 (3112A) has support for windows 7 64bit. I've tried the update utility provided by silicon image site. Be DOS mode, so is Windows. Does not recognize the card as being from Silicon Image. Looking at the card, I saw that the chipset BIOS supports. AM29LV010B-90EC. Does anyone know if there is a possibility of that? What right utility to use? Or if there is a 64-bit driver that works on that card? Thank you.
 

A:Adaptec 1210SA firmware Silicon Image?

Does anyone know?
 

http://www.techspot.com/community/topics/adaptec-1210sa-firmware-silicon-image.197828/
Relevancy 18.06%

If I'm able to, how would I go about running a network hub from an existing port on the router?

I.E. Modem->Router->PCs/Hub->TV/PC

In theory I'm trying to run a wired connection to my room and have the ability to have my PC/TV and any other devices connected to the network physically, my wireless strength isn't exactly good and it's very inconsistent at best when it comes to my internet speeds makes it a bit harder to watch Netflix/Play games.

Any insight would be wonderful!
 

A:Question about a home network using a Linksys WRT54GS2

Modem > Router >

Then use a LAN port on the router to connect to a LAN port on the hub.
 

http://www.techspot.com/community/topics/question-about-a-home-network-using-a-linksys-wrt54gs2.197409/
Relevancy 18.49%

Is there a way to know where on a laptop/tower the wi fi signal enters the computer? I'm just curious. TIA
 

A:WiFi Question

The WiFi signal enters though the antenna... In a laptop the antenna is around the display. In a desktop the antenna is either attached to the WiFi card directly or contained inside a USB WiFi device
 

http://www.techspot.com/community/topics/wifi-question.197374/
Relevancy 18.06%

My motherboard is a Z77 Asrok Extreme 6.

It has four dimm slots. I have One kit of 8 gigabyte memory from Gskill that is DDR3. 'dual channel' (11-11-11-28) PC 2133.

If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?


Here is another better question. What if I buy the exact same memory from Gskill and drop them in as well? So I have two kits of dual channel 8 gig ram for a total of 16 gigs. Both kits would be same type/speed and latency. Will this work or do I need to use 'quad channel'?

Edited for spelling.
 

A:Question about installing memory modules

Larsenex said:





If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?Click to expand...

I'm thinking that different timings will cause issues with Dual Channel functionality. I'm also thinking that Dual Channel only functions if all modules can operate in dual mode. If you are not planning on operating in Dual Channel mode, I don't think it matters. However the modules should operate with the same timing, if they are to be linked together.

Anyway without actually knowing for sure, those are my thoughts.
 

http://www.techspot.com/community/topics/question-about-installing-memory-modules.196451/
Relevancy 18.06%

I recently built a computer with the asus OCII GTX 770 gpu and ran a quick stress test with msi kombustor. I set the setting to no anti-aliasing and 720p resolution (not full screen) and ran the furry and tessy (gl4) stress test. At about 7 minutes my gpu got up to about 83 degrees C with fan speed at 100 percent. I stopped the test as I still don't know too much about stress testing and how hot I should really let my GPU get. I know the NVidia website says the max this card can take is about 98 C but I was wondering if at 7 minutes, 83 degrees C was normal or if that is too hot even for this stress test. Thank you.
 

A:Question about my stress test results for GTX 770

For a stress test, that's pretty normal on an GPU like that, stress testing pushes the GPU to it limits which most of the time is more than games will even push it. As long as your temp stays below the threshold NVidia says (Which in your case is 98) then your fine. I would however, if you want to improve the temp, see if you can improve the airflow around the GPU area, the Asus Cooling system is pulling in air and pushing it down on the GPU which means you have to move the air once its been pushed over the card. I would try adding a fan around the GPU exhausting if your worried.

But honestly, your fine.
 

http://www.techspot.com/community/topics/question-about-my-stress-test-results-for-gtx-770.195951/
Relevancy 18.49%

My friend has a laptop and needs to get SD connectivity to be able to download into his computer. He has an HP 6565B laptop with an express card 54 slot. Is there an express card that has an SD adapter built in? Is the express card slot faster than usb 2.0? If not, I guess a usb 2.0 external card reader would be fine. Unless someone has a better idea. Thanks.
 

http://www.techspot.com/community/topics/express-card-54-question.195661/
Relevancy 18.49%

Hello,

it's kinda weird but last few months my pc was getting slower and slower, and when I decided today to format my pc it wasn't needed anymore, cause I started my pc on, typed pass and right after I typed the pass it goes directly to my desktop, programs starts directly all the same. It's like my pc is fast again...but the question is why???

Regards
 

A:Performance Question

I am not really sure what the cause of this is, but it happens to me every once and awhile.
 

http://www.techspot.com/community/topics/performance-question.194990/
Relevancy 18.06%

Hi, in the sound Blaster Z control panel should I set my headphones to stereo or 5.1 for the best surround sound experience? They are stereo headphones.

Thanks
 

A:Sound Blaster Z settings question

You'll only get virtual surround. Set it to stereo, then enable virtual surround (or whatever it is called).
 

http://www.techspot.com/community/topics/sound-blaster-z-settings-question.195541/
Relevancy 33.54%

Not sure if posting in the right place, but hope someone can help. I have a dlink dsl 2780 and a huawei hg533, I am wanting to put custom firmware on them both but not sure which one is best. after looking about I am all most sure they have broadcom chipsets in them. which dd-wrt says it will work on most broadcoms and also something called tomato. or will I be better using something else. thank you to anyone who offers advice.
 

A:Custom router firmware

Check the ddwrt compatibility list. If your router(s) are on that, then use ddwrt. I've ran it on 2 routers and been very pleased.
 

http://www.techspot.com/community/topics/custom-router-firmware.194938/
Relevancy 18.92%

I have a GeForce GTX 660 Ti FTW+ 3GB and I want to add a second card.
My question is do I need to buy a second card that has the same amount of ram or can I buy a 2GB and save $50 bucks since it doesnt use that ram anyway

I have an 800w power supply so that shouldnt be an issue.
 

A:SLI question

You need to match the cards most of the time, however on ram differences, from what I understand it will just limit the total amount of ram accessible to the lowest amount (In your case 2gb will be useable on both cards). That is at least how it works on the GTX 680 4gb versions if you mix a 2gb together.

I would recommend getting a matching pair, it causes (Or has the chance to cause) more issues then just putting a twin right next to it.
 

http://www.techspot.com/community/topics/sli-question.194121/
Relevancy 18.06%

Hi guys first of all I would like to state that this will be my first pc bought piece by piece so I m worried I might be doing something stupid I got a cards + config about graphics Question lappy i with an nvidia gb card on it and it suits me fine but it isn t really built for gaming it overheats a lot so I m looking into a desktop machine I have been reading a lot on the subject and so far this is what I came up with i k Hydro Cooler Corsair h MB asus sabertooth z x GB G Skill Ripjaws DDR MHz OCZ W MODXSTREAM-PRO PLUS SM Hd Wd tb Sata mb rpm GB XFX OR Sapphire RADEON gb LED quot FULLHD AOC Gabinete Thermaltake V Black Edition I m planning to buy an SSD later on Ok my doubts here are - Are all the Question about config + graphics cards parts well chosen if not what changes would you make I can t spend more than state above at the moment - Is this the best card in the price range -Will I be able to Crossfire SLI in the future if needed -Will I be able to play games such as Battlefield and Question about config + graphics cards most recent games at a decent fps fullHD probably nbsp

A:Question about config + graphics cards

You're spending way too much on CPU/MOBO, with a low-end cooler, instead of pumping cash into GPU.

- Get a HD7970 or a GTX770 at minimum.
- Maybe make changes to that PSU, it's not the best brand I hear, and 700W doesn't leave room for expansion.
- You can safely drop down to an i5 (saving $100) and drop down on your mobo (save $100).
 

http://www.techspot.com/community/topics/question-about-config-graphics-cards.194119/
Relevancy 18.49%

Hello, I am looking a new screen for my sony vaio, the sticker on my screen have this Number: LTN156AT01 plus this three (3) additional numbers "S03" But I see on ebay, many sellers with the same part number LTN156AT01 with differents additional number like : H01 S01 S02 S03 T01 U01 V01 W01 My question is: I have to match, only the first part number LTN156AT01. without regard the other three (3) number whatever it is??? I need to replace the screen, but I am not sure, that I only need the first part number LTN156AT01 also many sellers have this part number for many brand of laptops to replace the screen. Thanks for any help
 

A:Question about screen to buy

I would go with the last 3 numbers to. It possible their are different version of that part number.
 

http://www.techspot.com/community/topics/question-about-screen-to-buy.194020/
Relevancy 18.49%

So I have a monitor 1366x768 and I wish to upgrade to a 1920x1080 im currently running a gtx 660


at this moment my pc is connected to my tv which is a 30 inch 1920x1080 and I do struggle abit on games which I get on the near 40 fps at max graphics full resolution but I was wondering is there any difference in fps between a

23 inch monitor 1920x1080 and the 30 inch tv 1920x1080

and is it even worth it of me upgrading my monitor
 

A:Video resolution question

There won't be as they are the same resolution, the fps depends on the resolution, and the quality settings on the games itself - and good hardware (CPU and GPU) to play it with as well!!. The size of the screen won't affect the fps unless the resolution changes too.
 

http://www.techspot.com/community/topics/video-resolution-question.193629/
Relevancy 18.06%

I am building some PCs for a video editing class we are starting. I have most of the materials picked out what I will be using. The CPU will be the Xeon E3-1230 V2. We cannot overclock so I am going with a Xeon cpu. Anyway my question is with video editing and no gaming, Do I need an aftermarket cooler? Thanks.
 

A:Building PCs for video editing class and have a question

I would recommend one (Maybe not the fanciest) but a decent one to help with the cooling of a xeon. Though like I said, I would not recommend anything fancy, just something to add a little airflow especially if your case is not huge and moving a lot of air.
 

http://www.techspot.com/community/topics/building-pcs-for-video-editing-class-and-have-a-question.193007/
Relevancy 18.49%

Hey there So I have this board Asrock Twins-HDTV I found out that with my processor I cannot use this board BIOS Upgrade question unless I upgrade the BIOS Thing is the most recent version is P I have P The question is there is a newer version of the board called the R supporting Core Duo using the same chipset Should I upgrade to BIOS Upgrade question P or will that brick my board And will I gain Core Duo support with that Remember my board is the quot R quot not the I have this question really because I m a bit of a suck for quot latest versions quot and in the description there are things like quot Modify USB code quot Can I trust ASRock s website in giving different bios files to the and the Regards The website of my board http www asrock com mb overview asp Model Twins-HDTV and the newer one http www asrock com mb overview asp Model Twins-HDTV R nbsp

A:BIOS Upgrade question

BIOS updates are always considered risky and recommended only when necessary. With that said I have never had issues while updating, but that doesn't mean I never will. What I'm trying to say is no one can guarantee 100% success.

After studying the links you provided, I'm thinking you have a Core2 processor that your motherboard will not support.

BIOS updates are software updates. Board revisions are hardware updates.
The P2.10 BIOS update seems to require the V2.0 board revision in order to support the CPU in question.

In other words it looks as if the BIOS update supports your CPU but also requires the V2.0 board revision. Without the needed hardware, the software update is useless (unless you need the update for another reason).
 

http://www.techspot.com/community/topics/bios-upgrade-question.193004/
Relevancy 18.06%

I overclocked to 4.5ghz, and the intelburn test passes.

However, in speedfan I am a bit confused on the temperatures it is showing me.

Specifically the CPU temp vs the Core 0 temp.

The cpu temp stays nice and low during stress test (47c), but the Core 0 temp jumps to 87c.

What's the difference in those two readings and am I running too hot?
 

A:Overclocking i7-3770k, question about speedfan

I wouldn't even use speedfan to monitor temps. Download real temp or core temp and report back.
 

http://www.techspot.com/community/topics/overclocking-i7-3770k-question-about-speedfan.192653/
Relevancy 18.06%

I cannot know how the bios update so I need some help for the how the bios update.I want to install the newest driver but I can't figure out how the driver is in a .02 file and I can't make heads or tails of it can anyone help me?
 

A:How to update BIOS

astar master said:





I cannot know how the bios update so I need some help for the how the bios update.I want to install the newest driver but I can't figure out how the driver is in a .02 file and I can't make heads or tails of it can anyone help me?Click to expand...

please post the brand/model of your motherboard... I.e.: ecsg41-tm; intel dh55tc; asrock z77 extreme4
 

http://www.techspot.com/community/topics/how-to-update-bios.192864/
Relevancy 33.54%

Hello first all my native language is Dutch so sorry for any strange sentences I SSD firmware Updating Micron have problems with my computer Every hour roughly my computer freezes or restarts Every now and then I get a blue screen F When I get a blue screen my SSD is gone from Updating firmware Micron SSD the bios I get an error when starting up So I have to reset my bios to default standards where my SSD turns up again I read through the internet and saw that micron SSD s have problems which looks like mine I have a C -MTFDDAK MAM There is an update for the firmware but im unsure which one to install I tried Micron H SSDFirmwareUpdate Signed exe but that is a wrong one apparently cause I get an error when trying to update When starting up it says that GRLDR MBR cannot be found Luckily my pc still starts up but no update is done Im afraid to just try any other one I also read something about disabling Marvel raid and unplugging the other harddrive but my technical expertise is not that high I dont have raid Can someone help me please Thanks in advance Martin nbsp

A:Updating firmware Micron SSD

Ok first stupid mistake made. I started the updater from my data disk and not the SSD.

It did do "something" but at the end it said there was no SSD to upgrade...

What now?
 

http://www.techspot.com/community/topics/updating-firmware-micron-ssd.192742/
Relevancy 18.49%

All right here s my problem I m looking into buying a new laptop and I ve broken it down to two choices an Asus model Q A-BHI N with an Intel HD Graphics card and another Asus model Graphics Card Question U VC-DS with a nVidia GT card Both have GB of active memory and GB of hard drive space Either way I want Graphics Card Question a new and better graphics card installed and what I really want is the nVidia GeForce GTX Ti possibly even a little higher But I don t know if it is compatible with either of the Graphics Card Question above laptops The last time we bought a new computer and got a new Graphics Card Question graphics card for it the system power requirements for the card were not met by the computer and a better power supply had to be installed for the card And there may be other things that would make the card incompatible with the two laptops as that I don t know about Can anyone help me out Any help would be much appreciated nbsp

A:Graphics Card Question

If I may ask, what do you plan on doing with the laptop? Do you plan on playing "graphic intense" games or will it mostly be a little gaming and watching movies? It might be easier to look at other laptops if you really want the GTX 650 card inside. Also, what kind of budget are you working with?
 

http://www.techspot.com/community/topics/graphics-card-question.192590/
Relevancy 18.06%

Do you have to update or change the Motherboard to update the processor?

I have a Pentium 4 processor 548, 3.33GHz, 1MB L2 cache, 533MHz front side bus. Can one "Plug and Play" so to speak with an updated processor to the same Motherboard?
 

A:Motherboard/Processor update

Your CPU socket is PPGA478, P4 is the highest CPU this socket will support.

Even with LGA775 CPU socket, unless you had a motherboard that would support quad core, there would be little reason to upgrade over a complete system replacement.

In answer to your question to "Plug and Play", yes and no. Yes CPU's are basically plug and play, and No the motherboard must support the CPU first.
 

http://www.techspot.com/community/topics/motherboard-processor-update.192561/
Relevancy 18.06%

Hey guys, I've attempted a bios update through this website and I've been left with this sitting on my desktop for two days and the loading bar has not moved an inch.
I tried to update the BIOS because for the last few weeks when my computer is booting the screen would go blank and just stay blank and I would have to keep resetting until it would finally boot. I was hoping a bios update would do the trick otherwise I would not have bothered.

Im worried if I exit out or shut-down my computer I could corrupt my BIOS. Any ideas?..


 

A:Bios update help

I would exit and maybe try again. Thats the download phase which has nothing to do with the actual update process. The download will complete, before any attempts to update will begin. Updating the BIOS can be very risky, updating would never be handicapped by possible problems of downloading.
 

http://www.techspot.com/community/topics/bios-update-help.192433/
Relevancy 18.06%

Hellow guys again ,, hello the best website ever !!!
I jus wanna ask about something ,, Earlier I mentioned something about upgrading my processor to core 2 duo ,, now ive done that but when ever I start my computer ,, this msg shows up !
""" 1801 - microcode update Error
Missing or invalid processor microcode update. please contact hewlett-packard company for a new microcode update to support the new processor stepping """
Any help ?
HP compaq dx7300 microtower is my pc and Intel core 2 duo E4500 @2.20GHz is the new processor.
Many thanks in advance
 

A:Microcode update Error ?

Have you tried contacting HP concerning it?
 

http://www.techspot.com/community/topics/microcode-update-error.191974/
Relevancy 17.2%

A few months ago I updated my MSI Z A-GD to the latest BIOS quot vP quot which is still the latest settings Z68A-GD55 update won't MSI overclocking changes allow to BIOS after version on MSI s website as of today Since updating to this version the UEFI BIOS screen is totally different the layout has been changed entirely I was able to find the overclocking settings quickly but since the update the board will not allow me to change many settings All CPU Memory chipset voltage adjustments CPU ratio adjustments bclock adjustments etc are all either greyed MSI Z68A-GD55 won't allow changes to overclocking settings after BIOS update out and cannot be selected at all or they are set to quot Auto quot and that is the only available option for them This is a solid overclocking motherboard from what I ve heard online and I m running a K series CPU k so I m really perplexed as to why I can t even adjust the supposedly unlocked CPU ratio on my k I USED to be able to use these settings before the BIOS flash Also I can t seem to find anyone online who s having a similar problem as me As it stands now the only overclocking I can do is with MSI s quot OC Genie II quot which basically automatically overclocks for me I think this is totally ridiculous why is MSI s automated tool allowed to touch these settings when I can t modify them manually Anyone have any idea what s going on My first thought was that maybe there is a setting somewhere in the BIOS that must be enabled first in order to open up the overclocking settings but I searched far and wide and couldn t find one Any help would be greatly appreciated nbsp

A:MSI Z68A-GD55 won't allow changes to overclocking settings after BIOS update

Yeah, I think there is a setting somewhere that is checked to auto. Try exploring all the tabs of the BIOS screen and report back if you find anything.
 

http://www.techspot.com/community/topics/msi-z68a-gd55-wont-allow-changes-to-overclocking-settings-after-bios-update.191535/
Relevancy 18.06%

Hi Guys I am now working for a company that has implemented a function in there machines Printer copier wizards.. This for advanced networking/proxy question is an MFDs The function is explained in the next paragraph Basically many companies hire these machines and what we have implemented is an automated billing meter that This is an advanced question for networking/proxy wizards.. is required to talk out of the clients network and back to our billing team in some cases the clients use a proxy server There is a problem when I am talking to the customers trying to gather the network details so that our technician will be able to go onsite and enable this feature on the machine If someone on here can solve this problem I am about to mention They are GENIUS because I have talked to people that really know what they are doing and so far I have got an answer Here is the problem when I talk to the IT guys sometimes or actually of the time they are not the guy who actually set up the network and it can be a real pain to retrieve information even if they have full admin rights on there network I need to know what Proxy authentication scheme the customer is using whether it be basic NTLM digest etc Is there any free detection tools I can use or maybe there is a way I can guide them to the place in windows where they can get this information for me I was just thinking is there something in the registry that tells me this information Please if anyone has the answer they true champions and I really will appreciate it Regards AR nbsp

A:This is an advanced question for networking/proxy wizards..

I need to know what Proxy authentication scheme the customer is usingClick to expand...

Puzzled here. Authentication is logging into a secured connection, so what is the user logging into?
 

http://www.techspot.com/community/topics/this-is-an-advanced-question-for-networking-proxy-wizards.191415/
Relevancy 18.92%

As I previously mentioned in a prior thread, I found out after the fact my W7 tower has built in wifi.
Before I knew that, I obviously had my DSL in all the time.
I've since got my XP on DSL & using the wifi only on my W7.
When DSL is plugged into the W7 and or the XP,XP, does it automatically dis connect the wifi? Yes, my XP has both DSL & USB wifi although not built in.
TIA
 

A:A DSL/Wi-Fi question

It dose not on my HP. I just went in to the control panel under networks& shareing and disconnect my wifi.
 

http://www.techspot.com/community/topics/a-dsl-wi-fi-question.191102/
Relevancy 18.49%

I found a CD/DVD today NOT in its cover & am wondering if it was put in a CD/DVD player NOT hooked up to a computer or internet, could it / would it infect or damage a CD/DVD player only hooked up to a tv if it "was" infected? I know I won't try it on my pc's, but am curious, thank you.
I have every intention of destroying it either way, but I'm just curious.
 

A:A question about CDs/DVDs

As long as the CD/DVD player isn't hooked up to something with a storage solution it should be all fine!
 

http://www.techspot.com/community/topics/a-question-about-cds-dvds.191097/
Relevancy 18.06%

Hello! I'm new here at Tech Spot. This is a great website.

Where can I get a copy of the newest BIOS update for my motherboard?

Model: Asus P5GD1-VM Motherboard
Version: 0602
Chipset: I915
Date: 09/06/2005-16:48:11
Onboard Sound: Azalia (swa)
Onboard LAN: Exist (wl)
BIOS Size: 512 K
BIOS Type: AMI

I downloaded all BIOS .ROM files in the official website of Asus. But it weren't compatible with the BIOS to be flashed.

Please help me! Thank you very much in advanced!
 

A:Motherboard BIOS update

The latest BIOS for your board is version 1015. It's not necessary to load each BIOS in order, just load the latest. To load the BIOS you must copy it to a floppy disc and rename it P5GD1-VM.ROM If you didn't rename it, that's why it won't load. On the same Asus download page, you can get the user manual for your board, which goes into detail how to reflash the BIOS. It can render your motherboard un-bootable if you do it wrong, so I would read the manual before attempting it again, and follow instructions carefully.
 

http://www.techspot.com/community/topics/motherboard-bios-update.191021/
Relevancy 18.49%

Hello,
I want to build a little computer for only one purpose, watching films on my tv, nothing more.
Now I have a question, does the motherboard "M3N78D FX" support this cpu "AMD Athlon II 270 X2 Dual Core 3.4Ghz", if not which does?

your opinion is always welcome, because I have little to no experience in making computers.

AMD Athlon II 270 X2 Dual Core 3.4Ghz
M3N78D FX
Asus GeForce GT610
Kingston HyperX DDR3 1600 PC3-12800 4GB
WD Caviar Blue 500GB SATA3
Power supply b-move 500W
I have already a case lying around in my house
My Max budget 240 euro (311 dollar)

Regards,
nooby
 

A:Question/opinion about little build

That CPU will work with the motherboard just fine and the setup in general would be perfect for watching films and television on, as long as you're not looking to stream at max HD (I dunno what the standard is anymore...1080p?) I'd go for a CPU with more cores, however, if it were up to me, as I tend to have other applications running in the background or multitask while I watch shows, etc. Dual core is perfectly fine if this is strictly, as you say, for watching films on your TV. Are there better possible builds? Likely, yes, but this one will get the job done at a price range you're comfortable with. I give it the nod, especially since you can upgrade the processor down the line, up the RAM to 16GB if needed and graphics cards are always swappable.
 

http://www.techspot.com/community/topics/question-opinion-about-little-build.190909/
Relevancy 18.49%

This has got to be the strangest thing ever to happen to me. I had an AGP ATI video card with 256 mb on board which I do not remember the exact model number. It was about 8 years old. I have recently bought a flat screen 1080i 24 inch led TV which works great as a monitor ( and I mean great) Eventually the ATI card went bad and a friend had lying around an older NVIDIA TNT2 model 64 pro64 with only 64 meg on board. I almost flipped out to find that this older NVIDIA card was a 100 times better. Now everything is so crystal clear even at 1920 by 1080 my screen looks almost like an apple retina display. even the colors are so much brighter. The biggest complaint I had with the ATI card was poor contrast which I blamed on my TV/monitor, But no more. How could this possibly be? it makes absolutely no sense.
 

A:Very strange video question (:

Not sure. But I had an opposite experience many years ago. I had a p2 300 with an ATi Rage Fury Pro (I think) and played EV Nova on it, shortly after I built a 1Ghz Athlon Thunderbird system and had a GF2MX 32Meg card and it didn't look as good as the ATi.

Perhaps you didn't have the correct/best driver installed.
 

http://www.techspot.com/community/topics/very-strange-video-question.190728/
Relevancy 18.49%

I bought a sdd and I want to install it on my computer, intalling the os in it oviously.
I am going to do this and I need confirmation that it will work:

take off the hdd, plug in the sdd and the windows 8 cd intall windows 8 on sdd, then set to boot sdd preference.
turn off plug in hdd and turn on booting through sdd.
then format the hdd and finally intall all driver on sdd!

WOULD THIS WORK? really appreciate if you coment fast THANKS!
 

Relevancy 18.49%

When I try to play Aion, the graphics end up being terrible even though the game auto-configures my settings to high. Even if I turn everything to low, the problem remains. What happens is that lines of color shoot from just about every object in the game above the ground. My graphics card is an ATI Mobility Radeon HD5650. Why are the graphics not behaving even though the game presets the settings to high based on what it detects for my computer's graphics capability?

http://I.imgur.com/n2Wbvim.png is a screenshot from the game.
Thanks!
 

A:Graphics card question

Try updating your graphics drivers from here.
 

http://www.techspot.com/community/topics/graphics-card-question.189588/
Relevancy 17.63%

Hi I m a new member I recently decided to build my first PC Parts were Asrock Z Extreme MoBo Intel i K - LGA DDR Single stick GB G-Skill GeForce GTX GD OC Seagate Barracuder SATA TB w PSU Now for the problem - BIOS error Extreme update Z77 4 Asrock I installed everything correctly and got to POST so I decided to follow most Internet forum instructions to update my BIOS so I did so over the Internet flash update from the AsRock BIOS setup The problems arose after trying to update it via the Internet Now the motherboard won t even get to POST or show any signs or working Asrock Extreme 4 Z77 - BIOS update error on a monitor the fans for ten graphics card CPU and chassis all work the PSU is working fine But the Dr Debug is showing the status code which states in the description is that it is quot not used quot I don t know what to do iv taken out the graphics card and tried still the same disconnected everything except the socket and all pins are fine on the PCIe slots and RAM Any help would be appreciated ps I have a spare Gigabyte gt GB hanging round and was wondering if I can get the MoBo to work will it be worth sticking the in with the for any improvements however slight until I can afford another for SLI nbsp

A:Asrock Extreme 4 Z77 - BIOS update error

"Now the motherboard won't even get to POST or show any signs or working on a monitor" You might be able to get the motherboard to respond by removing the battery for a few minutes. If not, the motherboard may need to be replaced
 

http://www.techspot.com/community/topics/asrock-extreme-4-z77-bios-update-error.188524/
Relevancy 18.92%

I read in here someplace where if you had your pc hooked up to DSL & wi fi at the same time, one would cancel out the other? Is that how it is? TIA
 

A:Question about Wi-Fi & DSL

Not exactly. But if the wifi and DSL are on different networks (or similar other complicated stuff) then it has an effect.

Best practise: connect to only one.
 

http://www.techspot.com/community/topics/question-about-wi-fi-dsl.188621/
Relevancy 18.49%

I have an older Inspiron 531 and I wasn't planning on replacing it anytime soon as it plays all the games and does everything else I need. I was wondering if there is a way to boost its speed and power a little more though. Right now I can play most mmo's on med settings, but I wanted to get a little more out of it. Currently I have a Athlon 64 X2 4400+ (http://www.newegg.com/Product/Product.aspx?Item=N82E16819103546) processor in the PC. I have an AMD Phenom X4 9150e (http://www.geeks.com/details.asp?invtid=HD9150ODJ4BGH-R) sitting around right now, my question is, can I replace the 4400+ with the 9150e and is the Phenom faster?
 

A:Have an older PC question about processor

Unfortunately, you cannot use the 9150E for your machine. It uses a completely different socket then the 4400+. You will need a board that supports AM2 sockets to use the 9150E.
 

http://www.techspot.com/community/topics/have-an-older-pc-question-about-processor.188291/
Relevancy 17.63%

Hi guys I am looking to upgrade my graphics card this christmas and was looking at moving up to a http www amazon co uk Asus-GeForc update card needed Graphics help s computers amp ie UTF amp qid amp sr - from a http www geforce com hardware Graphics card update help needed desktop-gpus geforce-gt- -channel My system specs are as follows Operating system Windows Home Premium x Service Pack build Install Language English United States System Locale English United Graphics card update help needed Kingdom Installed System Model Hewlett-Packard HP Compaq Elite CMT PC System Serial Number CZC XR Asset Tag CZC XR Chassis Serial Number CZC XR Enclosure Type Mini-Tower Processor gigahertz Intel Core i - kilobyte primary memory cache kilobyte secondary memory cache kilobyte tertiary memory cache -bit ready Multi-core total Hyper-threaded total Main Cirucit Board Board Hewlett-Packard Serial Number CZC XR Bus Clock megahertz BIOS Hewlett-Packard J v Controllers Intel R Desktop Workstation Server Express Chipset SATA AHCI Controller Display NVIDIA GeForce GT Display adapter HP LA Monitor quot vis s n CN RZ September Bus Adaptors Intel R Series C Series Chipset Family USB Enhanced Host Controller - C Intel R Series C Series Chipset Family USB Enhanced Host Controller - C D Multimedia NVIDIA High Definition Audio x Realtek High Definition Audio http h www hp com products quickspecs na na pdf lt Link to the user manual model is on the third page the Business PC I am currently using a GeForce Gt card which is quite old and struggles with performance on some games I am interested in the Asus GeForce TI but have no clue if it will even work in my machine I looked towards the manual for my pc and it suggested cards worse than I currently have and I want better performance not worse The manual says that I have x Full length PCI slots x PCI Express slot and x Full Length PCI Express x graphics The TI has according to amazon quot PCI Express amp PCI Express support quot and looking at the specifications of both on their respective websites the GT uses PCIE x and the GT TI uses PCIE Given that the GT is already working in a PCI Express slot is it safe to assume the would be compatible GT specs http www geforce co uk hardware desktop-gpus geforce-gt- -channel specifications GT TI specs http www asus com Graphics Cards NVIDIA Series ENGTX Ti DCII TOP DI GD specifications Would this card work and if not could you suggest a card similar in capability that would Thanks in advance nbsp

A:Graphics card update help needed

Yes that video card will work with your motherboard.

However, it may not be the best value for money compared to the current gen video cards on offer.

For example, the newer Nvidia GTX 660 is the same price as the 560 Ti and offers around 30% more performance. Alternatively, the AMD Radeon HD 7850 costs even less and still offers better performance than the 560 Ti. I would highly recommend you go with one of these (doesn't have to be that exact model of 660 or 7850).
 

http://www.techspot.com/community/topics/graphics-card-update-help-needed.188413/
Relevancy 26.23%

Ive only had the privledge (and by that, I mean, enough money) to build a single CPU (with my brother, it was his) in my life. I recall it has (still works apart from mobo, only recently replaced) a intel core 2 quad. I see people talking about bent pins and stuff on CPUs, but I dont remember pins being on the core 2 quad. that was the easiest part I recall, just literally placed the chip in the socket (the heatsink, that was a headache). I dont recall any pins. Are pins literally pins as in thin rods sticking out of the bottom, or what?
 

A:Sorta random CPU question (no problems, just a question)

Most modern CPU's (Intel at least) no longer have pins on the CPU, but instead the pins are on the socket.

The newer socket 1155 and 1366 (and 2011 for that matter) are just like the Socket 775 you are experienced with the Core 2 Quad you installed, just slightly larger sockets.

It is still very possible to bend pins though, but in this way, you damage the motherboard (with the CPU socket) vs. the CPU. You must be careful when inserting the CPU since dropping it on a corner into the socket CAN bend and damage pins.

So if you've built a system with Socket 775/Core 2 Quad, you should have no problem with Core i3/i5/i7 and newer Intel sockets if this is what you plan to do. Everything is basically the same... just slightly different socket and DDR3 memory vs. DDR2, which are also very similar and just snap in the DIMM slots similarly.

I hope that helps! Good luck!
 

http://www.techspot.com/community/topics/sorta-random-cpu-question-no-problems-just-a-question.186212/
Relevancy 18.49%

Hi, I have a gtx650ti with VGA, HDMI and two DVI-D outputs
my monitor is a Samsung SyncMaster S22B300 with VGA and DVI-D inputs

I plan on connecting my TV through the VGA output of the card
and I was wondering how should I connect my monitor before I go and buy the appropriate cable

my best guess would be DVI to DVI (obviously) but is there any benefit from using the HDMI output?

thanks
 

A:GPU output question

HDMI gives you sound.

I'd use HDMI for the TV. Unless you don't have a flat-screen TV - in which case I'd question why you're hooking it up to PC.
 

http://www.techspot.com/community/topics/gpu-output-question.188029/
Relevancy 18.49%

Hi I have just installed a new pc monitor which is capable of HD but my computer which has a HD card connection is connected by HD to my hd television is it possible to install another hd connection so I could connect my pc monitor in hd as well.Since I posted this I now realize I can connect using DVI to HDMI on tjis card as well.Regards Martin.
 

A:HDMI question

HDMI to DVI converter would work, yes. Or, another graphics card (which is way more expensive).
 

http://www.techspot.com/community/topics/hdmi-question.187964/
Relevancy 18.06%

Hello techspot, Basically I think ineed to update my BIOS in order to run call of duty black ops 2, but I Don't know.

Basically when I try to run the game, my pc freeze's then shuts down and says no signal detected, I've been looking all over the inet to try find a solution and came across a forum where people were having the same problem. (They're all using AMD) Alot of the people there said they contacted there motherboard supplier's and asked for a flash drive update or something? to update their BIOS. After doing this they said the game started to work.
Please help.

my motherboard is a N68-VS3 FX, If someone could link me to the correct update for it that would be grand. im on windows 7 if that helps

Lee.

P.S , Sorry I think I posted this in the wrong section
 

A:BIOS update?

http://www.asrock.com/mb/overview.asp?cat=Download&os=BIOS&Model=N68-VS3 FX
 

http://www.techspot.com/community/topics/bios-update.187629/
Relevancy 18.49%

My question voltage GPU main gpu is a gigabyte gtx GV-N OC- GD and I also have a gtx ti for physx I GPU voltage question downloaded evga precision tool so that I could overclock the ti and squeeze a little bit more performance when using physx I started adjusting the voltage for the ti and after pressing quot apply quot I realized that the software does not have quot per gpu quot voltage adjustment It looks like it s some kind of master voltage adjustment GPU voltage question instead I m not even sure I would like someone to explain me what it really is On the other hand I m quite sure I read on many articles about kepler based gpus that it s voltage adjustment is totally different from what we ve seem so far Based on that it s quite impossible I may have tempered with it s voltage meaning that the voltage I changed could only be the ti s one My intention is to leave the at stock settings and do some overclocking on the ti alone Here are some images http imageshack us photo my-images gtx tiprecisonvoltage png http imageshack us f gtx precison png In this video here they also talk about the new voltage system Thanks in advance nbsp

A:GPU voltage question

have you tried overclocking without a voltage bump? Is it also a stock cooler or a custom cooler on the 560ti?
 

http://www.techspot.com/community/topics/gpu-voltage-question.181725/
Relevancy 18.06%

Hi all Every years I tend to take my desktop PC and make it my business backup and get a new build Currently I have an i - SSD gb WD EVGA GTX Antec P Corsair TX Kingston gb Hyper X and a Cooler Master Hyper I am looking to do Question about a components for silent build a Silent build with an i can t see going back to an i I do Question about components for a silent build not play any games on the computer This is for business use Excel Word Quickbooks Browser skype and I process my own pictures for business using Photoshop and ACDsee which is where is higher processing comes in as I hate to wait for RAW pictures to open up and process What parts would be good for a Silent Build What in terms of my existing build do you consider quot Overkill quot that I do not need that I went over on my current build Since my businesses are online it is quite important for me to be up and running and have a strong backup hence taking the current machine as a great backup that is ready to go in case there is a hiccup Thank you Elliot nbsp

A:Question about components for a silent build

Well if you want a silent build then ditch that GTX 470 for sure. Get a newer generation card with an aftermarket cooler, it will be more efficient and quieter than the 470 which is pretty much the worst card you can have for a silent setup. What card to get depends on how GPU intensive your programs are.

Your Antec P183 should be pretty quiet but if you don't have one already you'll want a fan controller so you don't run the case and CPU fans at full speed all the time.

As for the CPU I'd get an unlocked 3770K because the potential 20-40% increase in clock speeds will really help with your work and it's only marginally more than a 3770. Just make sure you get a Z77 mobo to take advantage of the overclocking capability. If you're not into overclocking then you might as well get a cheaper Xeon E3-12xx V2 which is the same as a 3770 but without the HD4000 onboard graphics (which you don't need by the looks of things).

If your cooler allows it then get some Scythe Gentle Typhoon AP-15 1850rpm fans in push/pull, they will be way quieter and perform better than the stock one. At the full 1850rpm they aren't silent but with a fan controller they'll run silent up to 1000rpm.
 

http://www.techspot.com/community/topics/question-about-components-for-a-silent-build.187742/
Relevancy 18.06%

An exam question asked "True or false? Given a five-tuple can any TCP connection on the internet be uniquely identified." I said false because you only need to know the source IP, source port, destination IP and the destination port. Is this right? (technically the statement may be true since if your given one more piece of information it doesn't make it false).
 

http://www.techspot.com/community/topics/theoretical-question-about-tcp-connection-on-the-internet.187750/
Relevancy 18.49%

Long one (video Ah last question card) story short I have ordered all but the video card Have to wait for my account to be credited probably Monday Tuesday before I can reorder it So its a few more days to think I m trying to find the best bang for the buck video card that would last me years I want the CPU to be the reason I can t Ah one last question (video card) run games anymore not the video card Cause there s really no point in upgrading the i K The motherboard can hold two video Ah one last question (video card) cards I m only getting one now and maybe one in the future if need be I have a w power supply which I think can run two of any video cards Which should I Ah one last question (video card) get I ve been eyeing up the GTX and the Radeon the is cheaper thanks to a sale on tigerdirect wasn t much of a thought last week cause of the price but it s just about as good as the and it comes with free games instead of one So do you think one of those big dogs be enough to last for years could two just be overkill and make the CPU bottleneck Or should I just get a lower down video card and buy one now and one in two or three years when the prices drop and I may need one I just don t want to spend more money then I need to I know the whole one nice video card is better then two cheaper ones but that s why I m not planning on buying two cheaper ones right off the bat I do want at least GB of vram Don t yell at me just doing my best to futureproof this thing Thanks for reading all that jibbirish Any opinion s are welcome this thread is more of a guessing game I think nbsp

A:Ah one last question (video card)

If the HD 7970 is cheaper than the GTX 670 then buy it.

One enthusiast level card is generally less hassle than two mainstream boards- the vagaries of Crossfire/SLI driver profiles and all that.
If the HD 7970 you're looking at is the reduced BoM (bill of materials) Sapphire card with the blue PCB ( model 100351SR) be aware that the build quality ain't that grand, so overclocking might be restricted if that's on the agenda. This card is also prone to coil whine. Any other 7970 shouldn't have any issues

EDIT: You mentioned Tiger Direct. They seem to have a pretty good price on the GTX 670 at $320, the HD 7970 deal must be pretty amazing- although the 3 game bundle does have appeal, especially if you were planning on buying the titles anyway.
 

http://www.techspot.com/community/topics/ah-one-last-question-video-card.187303/
Relevancy 18.49%

I have a question:
If the NVidia card is broken, but the cable is still attached to the discrete NVidia graphics card out, does the video get "pulled" from the integrated (CPU) graphics chip?
 

A:Graphics question

No, it does not. You will have to connect the cable to the correct output.
 

http://www.techspot.com/community/topics/graphics-question.186564/
Relevancy 18.49%

Hey guys here are my specs.
AMD 64 X2 4600+
WINDSOR AM2 socket
nforce 720a chipset.
xfx nvidia 9500gt
bios american megatrends inc.
my question is what cpu can I upgrade to that will give me a good boost on this computer?
im going to also be buying a new card in a few months as well.
how hard if this board will allow me is it to upgrade it to handle am3 cpu.
 

A:AM2+ to AM3 upgrade question

Who is the manufacture of your motherboard? You can not upgrade the CPU to AM3. If the board was designed for AM 2. You would have to replace the motherboard.
 

http://www.techspot.com/community/topics/am2-to-am3-upgrade-question.186471/
Relevancy 18.06%

Hello, im currently working on building a new computer, the PSU I got unfortunantly only has 1x6pin PCI wire but the graphics card I wish to get require's 2. I was wondering if any one could help me with this situation. any advice would be nice.
Computers specs listed below.

Kingston 4GB 1333MHz DDR3 Non-ECC CL9 DIMM Memory x2
650 WATT Power supply Alpine Black 650 WATT Silent Quiet PC ATX PSU
CiT Mars Midi Tower Part-Mesh Computer Gaming Case with 2 x Red LED Fans & LED Display
ASRock B75 Pro3-M Motherboard (Socket 1155, Intel B75, DDR3, S-ATA 600, Micro ATX
Intel Sandybridge i5-2400 Core i5 Quad-Core Processor (3.10GHz, 6MB Cache, Socket 1155
Using a HD and CD-D from previous computer.

Many thanks
 

A:Computer power supply question

That's an absolutely horrendous PSU, return it and get a decent Antec/Corsair/XFX unit. It should tell you something that a PSU apparently rated at 650W only has one PCI-E connector, I.e. it's bad quality and won't output anywhere near 650W.

Out of interest what GPU do you have?
 

http://www.techspot.com/community/topics/computer-power-supply-question.186310/
Relevancy 18.06%

I noticed yesterday that HP was auto-updating wireless updates. After they had finished, my wireless capability was gone. There was a problem with my Intel Centrino N 1030 wireless driver, and have not been able to correct the problem. Also, when I try to restart it takes forever, and I get a notification when it finally does that there was a critical blue-screen error?
Please help!
 

A:Can't connect wirelessly after update

What version of Windows?
 

http://www.techspot.com/community/topics/cant-connect-wirelessly-after-update.185800/
Relevancy 18.06%

Hi I got from a friend his old computer that according to him it wasn t working anymore The MB its a Gigabyte GA- I p-G I got it running My idea for the computer is to use it as a small media server to stream to my tv s Now HDD motherboard IDE regarding about Home SATA question server & here comes the Home server question about motherboard regarding IDE & SATA HDD question this motherboard has Home server question about motherboard regarding IDE & SATA HDD IDE ports and SATA ports Can I use ALL of the ports I want to get it fill with HD s to save all my media thats why I am asking Will it work with all the ports full I dont want to spend money in a entire new computer right now I dont know if it can work with all IDE used plus adding SATA HD I want it to end like this IDE GB HD MASTER DVD DVD-RW SLAVE IDE GB MASTER GB SLAVE SATA TB SATA TB I am Home server question about motherboard regarding IDE & SATA HDD just missing right now the sata HDD s and plan on buying them but I want to be sure I have the manual but it doesn t say anything about conflicts or something do you guys know anything about it Here is the link for the MB specs and manual http www gigabyte com products product-page aspx pid sp nbsp

A:Home server question about motherboard regarding IDE & SATA HDD

I recall comments re mixed IDE + SATA but don't recall the specific reference.

What should work is:

bootable system on one device (eg IDE)
storage device(s) shared (eg SATA)

 

http://www.techspot.com/community/topics/home-server-question-about-motherboard-regarding-ide-sata-hdd.184490/