Windows Support Forum

Realtek Driver replaced with "High Definition Audio Device"

Q: Realtek Driver replaced with "High Definition Audio Device"

Hello. I just recently updated my Lenovo Y530 Ideapad to Windows 7 Ultimate x64 from Windows Vista Home Premium x64. After I updated my laptop, I went to adjust the sound and I noticed that I had 3 sound devices that all said Speakers. I then went to the Device Manager and saw that under the Sound,video, and game controllers tab that one of the sound drivers said "High Definition Audio Device". Before upgrading to Windows 7, the driver said it was a Realtek driver. I have tried to get back the Realtek driver, however, when it finishes installing I end up with no sound. Is there anyway I can get back my Realtek drivers?

Relevancy 100%
Preferred Solution: Realtek Driver replaced with "High Definition Audio Device"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Realtek Driver replaced with "High Definition Audio Device"

Download the latest Realtek driver.
Realtek

Or, you can get the Lenovo older driver, which may be more compatible with your hardware.
http://download.lenovo.com/UserFiles...N2AUD09WW6.exe

http://www.sevenforums.com/drivers/236337-realtek-driver-replaced-high-definition-audio-device.html
Relevancy 26.66%

Hi everyone A few days ago I replaced my cpu motherboard and hdds on my system OLD System main components Case Antec v Cpu i Mobo Asus onboard realtek mobo low crackling) bk volume (very ud3h sound ac1150 issue - and Gigabyte p x d-e RAM corsair vengence gb x GPU Zotac GTX Boot drive Intel Gigabyte ud3h bk mobo - realtek ac1150 onboard sound issue (very low volume and crackling) gb ssd Win HDD WD TB black New System main components Case Antec v Cpu i k Mobo Gigabyte z x - ud h-bk RAM corsair vengence gb x GPU Zotac GTX Boot drive Samsumg evo gb ssd Win HDD WD Gigabyte ud3h bk mobo - realtek ac1150 onboard sound issue (very low volume and crackling) TB black I was able to clone the ssd and hdd samsung migration for ssd and Easeus todo backup for hdd Initally I had some driver conflict when I Gigabyte ud3h bk mobo - realtek ac1150 onboard sound issue (very low volume and crackling) booted up the computer on the new mobo I managed to uninstall all the old drivers and then used the driver cd to install the mobo drivers and even updated all of them to the latest version I The conflict I m still having is with the back panel audio for the onboard sound I get very low volume and and crackling at certain frequencies tried on both my generic creative speaker and Audio technical headphones When I m plugging in the speaker into the green port and have it plugged in half way or accidentally touch the jack to the I o plate I get really strong loud static noise Here is the list of solution that I tried with no success Updated the Realtek HD Audio Manager app I e the one installed from the driver cd to the latest one Used DPC latency checker and it is showing all greens didn t test it for more than a minute though should I be doing something while the app is on to test for interference Installed Generic Realtek driver for ac codec Disabled C E and EIST in the bios Played with the equalizers on Realtek HD Audio Manager helped to reduce bit of static but its still there and the volume is still very low Disabled all line in devices Checked audio with a ubuntu live cd and the problem still persists does this indicate a hardware issue What I find strange is that my front panel that is connected to the HD audio pins on the motherboard works fine with the same speaker and headphones I still have some more solutions I need to test out like Update the bios currently on F version the latest is F I have a spare asus xonar dg PCI so will try to install it and test if audio will works fine But this is not a permanent solution as I only have one PCI slot which I m using for my wireless card adapter Edimax g Run Memtest can this ever be a problem for sound related issues Driver Sweeper I believe I have properly manually uninstalled all the mobo drivers but going try this app to be sure Can someone please point me in the right direction on how to solve this This is the first time I m installing replacing a mobo and cpu so should check if there is a wiring issue when I replaced all the parts back into the case Please let me know if more information is need to help resolve this I have a few more days left incase I have to RMA the mobo so any pointers would really be helpful before I decide to send it back if at all TIA Sreejit S nbsp

http://www.techspot.com/community/topics/gigabyte-ud3h-bk-mobo-realtek-ac1150-onboard-sound-issue-very-low-volume-and-crackling.217321/
Relevancy 20.21%

Hey guys I have been trying to set up my tv so I can watch movies online... to say the least it is not going well.. I have been trying for over 2 hours and 2 trips to Best Buy to figure out why i have no sound on my tv.

My headphone jack does work.
There is a picture due to the vga cable.
I have a Y Cable plugged all in but no sound

Please someone help!!
 

A:Laptop to TV no audio with VGA cord and y cable

Hey, I've tried to set this up at one point.. VGA doesn't seem to give sound at least on some T.V's so if you have a sound input you could try:
amazon [dot ] co.uk/s/?ie=UTF8&keywords=vga+with+audio&tag=googhydr-21&index=aps&hvadid=8326471606&ref=pd_sl_2xe1bbnp3q_e

sor maybe you could get something like:
electgadget [dot] co.uk/sg/index.html?s=3219F6825E2CD6CA31C2DE7A93A69CF9&p=51679ce3738a69b94d40325e0e3d57db&m=1324951106152&a=/products&categoryid=28&stockid=460

play [dot] com/Electronics/Electronics/4-/20708900/Trixes-HDMI-Male-To-VGA-Cable-1-8m/Product.html?_%24ja=tsid:11518|cat:20708900|prd:20708900

However I don't with to take the blame if any of these don't work
 

http://www.techspot.com/community/topics/laptop-to-tv-no-audio-with-vga-cord-and-y-cable.175240/
Relevancy 48.59%

Every 10 seconds audio manager will set the volume on my mic to 0 and mute it I have already tried to uninstall it and reinstall it but no result.
It may be malware but I am not sure as of yet. Would really appreciate help right now.
 

A:Realtek Audio Manager Mic Problem

Problem Solved, As suspected it was malware. To fix this launch task manager, then go to start up, go through the list if something dosn't have a icon or dosn't seem to fit in right click and open its file location. If you are definite that it is malware disable it, restart go to the file location and delete all the files.
 

http://www.techspot.com/community/topics/realtek-audio-manager-mic-problem.216938/
Relevancy 20.64%

Hello guys,
So I build myself a new PC and I plugged in the headset that I have and found out that audio is louder on the right side, and I got it centerd after a while but I had to go to Sound manager and manually increase the audio on the left! But then, the sound is more queiter and I don't want that!
I know that this isn't a problem with my headset because they work fine on other PCs and I tride some others headphones and they had the same issue(on this PC)! My audio drivers are up to date and they are Realtek HD audio!
Is there anyone that knows how to fix this?
Thanks in advance!
 

A:PC audio isn't centered as it is supposed to be

Having the same problem with high quality audio equip

my research:

it is on every pc that gives digital audio via usb, spdif, or the 3,5 jacks from onboard soundcards aswell as hifi soundcards

so far, only music players did give me a correct audio image. VERY wierd, working on this since about 1 year and no audio expert could give me a good way to work around it OR a solution
 

http://www.techspot.com/community/topics/pc-audio-isnt-centered-as-it-is-supposed-to-be.209506/
Relevancy 70.52%

Hello,

first I already wanna thank everybody who replies to this and try to help me. Yesterday morning I tried to download a sound driver that would make the Stereo Mix option available. It was not from the original website of Realtek or HP. It was from here: http://driveragent.com/c/archive/196a161c/Realtek-High-Definition-audio#summary. After I finished the installation and restarted my PC there was a red cross next to the sound icon and when I tried to open volumemixer it said 'No audio output device installed'. I tried to uninstall it with system restore. Than I also tried to install the latest sound drivers from the Realtek and HP site but both didn't work. Also I saw on another topic that maybe some services were stopped but that wasn't. Now I really don't know what to do. Hope someone can help me.

Tsjeuke

PC manufactrurer: HP
Operating system: Windows Vista Home Premium SP2 32-bit
 

A:There is no output device (Realtek HD Audio)

Your PC manufacturer is HP but what is the model?
 

http://www.techspot.com/community/topics/there-is-no-output-device-realtek-hd-audio.216620/
Relevancy 21.93%

Hi, as the title suggests I've got a bit of a sound problem:

I wish to record some of my digital sound (e.g. my friends in Skype) using Audacity and stereo mix. However, using the built-in stereo mix record feature Audacity has, no sound is being recorded. So I checked out the stereo mix device under 'recording devices' in 'Sound' and found that it was not detecting any sound at all.

I'm not totally sure as to how all it's settings must be, but it's like this now:

Listen to: enabled
Playback through: Speakers (Realtek HD Audio)

The device is set to be 'used' ofcourse.

Any help would be greatly appreciated...

Marty
 

A:No sound coming through 'stereo mix' device

Go to Edit -> Preferences and to the 'Audio I/O' or 'Devices' tab, and make sure the the audio INPUT is set to the source you want to hear from, in this case, the pc sound card or such, apparently Windows 7 does not change the input device when you select the Stereo Mix function for some reason.

If that's not the case, maybe your sound driver isn't allowing the stereo mix to work, you can try the Control Panel configuring method, which you can find at the audacity website (i can't set up links yet, but go to wiki.audacityteam.org/ and add this: index.php?title=Mixer_Toolbar_Issues#Using_the_Control_Panel) [sorry for this, but it's for a good reason, i'm not a bot/spam ]
kind of a pain to read through and configure everything, but will fix the issue.

If you don't want any trouble at all, you can just plug you speaker in the PC's 'Line In' plug (the blue one), and set Audacity's Input device to "Line in" or such.

Good luck.
 

http://www.techspot.com/community/topics/no-sound-coming-through-stereo-mix-device.173670/
Relevancy 94.17%

I just solved my own problem and thought others might benefit since I could not find the solution using internet search My Realtek HD Audio manager seemed to be creating an echo on my quot Line In quot HD Audio Realtek "line from effect) (if in" echo it Removing output sound not a is audio signal I had already set the environment and equalizer sound effects options to lt None gt but the echo persisted I found the problem seems that I was essentially duplicating the Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) Line In audio stream The first quot source quot I found was the HD Audio manager You can open the manager and view the Line In tab - mine had a non-zero playback volume the slider was NOT all the way to Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) the left for zero playback If you want Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) output from the HD Manager that makes sense I also found out a second Line In quot source quot It was in the Line In properties settings where I had checked off the option to quot Listen to this device quot When I disabled that the echo disappeared To view this Line In properties tab right-click on the speaker icon in the notification area then select Recording Devices yes quot Recording quot Then the tab will display in a window with the title Sound You should see the Line In device in the list Right-click on this item and select Properties The Line In properties window pops up Then select the Listen tab UNselect Listen to this device The echo should disappear if you re experiencing my problem I hope this helps someone I m just trying to help the community from which I ve received so much help grinthumb nbsp

A:Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect)

Two same signals

You're doing the right thing... getting rid of the other input signal.
 

http://www.techspot.com/community/topics/removing-line-in-echo-from-realtek-hd-audio-output-if-it-is-not-a-sound-effect.178881/
Relevancy 18.06%

AMD has launched their first WQHL-certified Catalyst graphics card driver update since December 2014, bringing a heap of new features and performance updates across the board, as well as the usual array of bug fixes.

Read more
 

A:AMD launches major GPU driver update: Catalyst 15.7 WHQL

I have played with the CFX and Freesync support on the Acer 1440p 144hz monitor. Works great and makes me want to actually own a Freesync monitor now...
 

http://www.techspot.com/community/topics/amd-launches-major-gpu-driver-update-catalyst-15-7-whql.216359/
Relevancy 28.81%

I have previously on a different PC recorded the stereo mix in Audacity, whilst playing a CD and would get the full frequency range of the CD. On my current PC I now get a 20khz cut off, despite changing the settings (the sample rate and bit despth) on the playback and recording devices in Windows and also in Audacity. Does anyone know why this would be, and if there is any way of correcting it?
 

http://www.techspot.com/community/topics/realtek-windows-20khz-cut-off.216409/
Relevancy 20.64%

Hello, I have a brand new ASUS laptop with REAltek and WINdows 8.1. The frustrating issue I have is that my headphone audio sounds as if there is an echo-like sound to it. More like a sewer-pipe. I have restarted the audio programs under computer management. set the default in REALTEK to 16 bit 48000, and all devices seem to be operating fine. I even uninstalled SKYPE as suggested.The test in REALTEK is also okay. Please, any assistace would be more than appreciated.
 

A:Headphone audio on laptop

It sounds hollow with no bass or clarity. I have adjusted the equalizer to no avail.
 

http://www.techspot.com/community/topics/headphone-audio-on-laptop.216378/
Relevancy 31.39%

Intel has led the desktop processor market for the last decade, dominating in price and performance nearly without challenge since the introduction of the Core 2 chips in 2006. However, as of late the challenges of improving silicon chips has...

Read more
 

A:Intel's 10nm 'Cannonlake' delayed, replaced by 14nm 'Kaby Lake'

"Devil's canyon" take two
 

http://www.techspot.com/community/topics/intels-10nm-cannonlake-delayed-replaced-by-14nm-kaby-lake.215777/
Relevancy 44.29%

I have a choice to make on a new monitor.

It needs to be VESA mountable and will be for strategy gaming and work purposes. Games like Wargame, Supreme Commander and World of Tanks. I work as a sysadmin so think lots of windows open!

Do I get a 24" monitor like this Benq (recommendations on a different one are welcome)

Or do I get a 27" monitor. If you think 27" what res would you recommend baring in mind I am sporting a 760gtx.

Thanks,
 

A:24" monitor or 27"

I think 1080P is the best bet for your GTX 760. 2560x1600 or 2560x1440 (27 inch panels) might be a bit too much. It is really personal preference whether you weant a 24 inch or a 27 inch. There are 1080P monitors in both sizes. I recommend Dell, BenQ, ASUS, Samsung, and ACER monitors. There are some other good ones, but I cant think of them off the top of my head.
 

http://www.techspot.com/community/topics/24-monitor-or-27.201808/
Relevancy 23.65%

While the AMD Radeon R9 Fury X has been praised for its compact PCB and powerful closed-loop liquid cooling solution, many Fury X owners noticed that the pump block included with the card emits an annoying high-pitched whine, ruining what...

Read more
 

A:AMD revises Radeon R9 Fury X pump block to kill high-pitched whine

Kill every sound, AMD, but the whining will continue...
 

http://www.techspot.com/community/topics/amd-revises-radeon-r9-fury-x-pump-block-to-kill-high-pitched-whine.216096/
Relevancy 18.06%

Hi all,
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
 

A:Unable to install Nvidia driver and also to play games on Windows 8.1

I'd recommend to do the following:

Perform a clean install of Windows

Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.

Let me know how it goes after you've tried what I've mentioned.
 

http://www.techspot.com/community/topics/unable-to-install-nvidia-driver-and-also-to-play-games-on-windows-8-1.213781/
Relevancy 21.93%

Hi All,
This is my first post here
So the issue I am facing is that I have a Dell Laptop with dual graphics card (Intel(R) 4400 integrated and AMD Radeon 8850m dedicated). The System would not detect any AMD driver installed on it. The device manager was showing only the Intel Graphics Card being installed .
Then I went on to uninstall the Catalyst Command Center from Control Panel, wherein I completely uninstalled the AMD Graphics driver and everything related to it.
Now, AMD is not at all being recognized by my system. Device manager doesnt show it even in hidden devices, DriverEasy scan doesnt read it, Even Dell System detect is failing to detect the AMD graphics Card.

How do I proceed ahead with this issue.

Have I somehow unmounted the hardware internally?
Is there anyway besides a factory reset to get this working again ( I have concerns with a factory reset also not helping me )
What system scan tools can I use to get my laptop to recognize the Device again?
Please Help
Thanks In Advance
 

A:AMD Radeon 8850m device is missing

Have you tried going to Dell support site and down loading the orginal drivers and software for your graphics.
 

http://www.techspot.com/community/topics/amd-radeon-8850m-device-is-missing.215797/
Relevancy 39.13%

I was updating my graphics card drivers for my graphic card PNY GEFORCE GTX 660 and went to device manager, I used ?automatically search for new driver? and a dialog box appeared "Windows has determined that the driver is up to date".
Yet, I went to Nvidia website and did a driver update. I checked again Device manager for my display adapter and the new driver was TWO MONTHS NEWER.
I wonder why that happens.
 

http://www.techspot.com/community/topics/why-is-device-manager-lying-to-me-about-the-last-driver-version-for-my-graphics-card.215610/
Relevancy 18.06%

So I have 2 images from the Device manager.
The driver has a Yellow caution sign with "!" inside it.



My issues:
Cannot Connect to wireless, But can connect via Ethernet Cable.

My troubleshooter said the drive couldn't start, and that I needed a Wireless Cable to plugin to the computer.

This is my school computer, my help desk helped before but they are out of office because its summer break.

Device Manager > Components > Problem Devices
Atheros AR5B97 Wireless Network Adapter PCI\VEN_168C&DEV_002E&SUBSYS_E034105B&REV_01\4&124A40C8&0&00E1 This device cannot start.
Also 2 things.
I tried disabling my Bluetooth High Speed, it did nothing.
I do not know if this is the right thread, because this is my first post, if there is anymore information you need to know please contact me.
 

A:Atheros AR5B97 driver not letting me connect to wireless

Hi and welcome to the boards.

How old is this system? Sometimes the wireless card will fail and a new one can be installed.

However, you can upload and install the latest wireless network driver for your system via ethernet cable. Sometimes that is all you need. If it is a built system like a Dell then go to the manufacture's website if this was a system that was built by yourself or someone else then go to the motherboard's website.

Please keep us updated.
 

http://www.techspot.com/community/topics/atheros-ar5b97-driver-not-letting-me-connect-to-wireless.215528/
Relevancy 23.65%

Corsair is well known for its PC components spanning a range of categories -- from memory to cases, power supplies, cooling and more. But this year it's trying something new with Bulldog, a barebones, console-like Mini-ITX box that's designed for...

Read more
 

A:Corsair goes for the living room with Bulldog PC kit, supports liquid cooling and high-end hardware

The case looks downright awful too me. I wouldn't have that thing displayed in my lounge.
 

http://www.techspot.com/community/topics/corsair-goes-for-the-living-room-with-bulldog-pc-kit-supports-liquid-cooling-and-high-end-hardware.213594/
Relevancy 50.74%

Hey there all.

This problem just happened recently. Every time I put a blank CD in my CD drive, a message appears saying "E:\ is not accessible. Incorrect Function. I can watch DVDs but it won't recognize any blank CDs I put.

Any ideas?

Thanks in Advance.
 

A:Drive is not accessible - "incorrect function"

First try this from the Windows Explorer after you have inserted a disc.

Right-Click on E: drive

Select Properties from the pop up menu

Select the Recording Tab

then check the "Enable CD Recording On This Drive" box.
.
 

http://www.techspot.com/community/topics/drive-is-not-accessible-incorrect-function.166087/
Relevancy 24.94%

AMD is today launching the A10-7870K, a new, high-end desktop APU that provides minor spec bumps over the company's previous desktop APU flagship at a similarly competitive price point.

Read more
 

A:AMD launches the A10-7870K, a new high-end desktop APU

The pricing is what kicks Intel in the nuts, which is great if you going for a low budget computer and don't mind not having a dedicated video card.
 

http://www.techspot.com/community/topics/amd-launches-the-a10-7870k-a-new-high-end-desktop-apu.213480/
Relevancy 24.08%

Many in the PC gaming world are turning their attention to AMD's upcoming Radeon R9 300 series launch and specifically, the R9 390X. According to the latest scuttlebutt, this card will ship with two different SKUs - an air-cooled version...

Read more
 

A:AMD Radeon R9 390X variant will come water-cooled with High Bandwidth Memory

Having to resort to water cooling just to be on par with nvidia what a joke
amd with their hot running primitive brute force gpus
 

http://www.techspot.com/community/topics/amd-radeon-r9-390x-variant-will-come-water-cooled-with-high-bandwidth-memory.212772/
Relevancy 24.94%

Oculus VR on Friday revealed the recommended hardware specifications needed to deliver the best experience when using its upcoming virtual reality headset.

Read more
 

A:A high-end PC will be needed for the best Oculus Rift experience

I don't get it? It's supposed to be peripheral device. like an LCD screen, just with inbuilt mouse pointer. What does your PC specs got to do with performance, other than necessity to setup the resolution for inbuilt displays? What does it mean 'games and applications created for the Rift in-house'? Does it mean it will require custom games and applications, no support out of the box for existing games? If that's the case, their VR is gonna die faster than 3D. Please tell Me I'm mistaken?
 

http://www.techspot.com/community/topics/a-high-end-pc-will-be-needed-for-the-best-oculus-rift-experience.213137/
Relevancy 25.8%

Hi,
the following are the specs of my computer:
Asus P8Z77-V- LX2 Motherboard
Intel i7-2600CPU @ 3.4GHz
16GB RAM DDR3 668.5MHz
NVIDIA GeForce GTX 780 Ti

I lag on almost every single game, including League of Legends, Maple Story, DotA 2. Most of these does not lag on my low-mid end laptop and I find it very annoying why has it been lagging on my PC. I thought it was a faulty graphics card back then when I had the ATI 6970M graphics card then I upgraded to the GTX 780Ti and it still lags.

I notice miracle happens when I was using my 6970M graphics card, whenever I uninstall and re install the driver of the graphics card at the "Manage my computer" program, the lag disables and I am able to play all games with no lag. However, after restarting, the lag resumes and I must repeat the same step to remove the lag. However, with my GTX 780Ti, it does not work.
 

http://www.techspot.com/community/topics/high-end-pc-lag-while-gaming.213241/
Relevancy 19.78%

I have a problem that I hope can be fixed I headset is up is that output Microphone audio receiving picking my just recently bought a new computer and I did not have the same issue on the old computer which was XP The one I have now is Windows bit home premium Same headset and everything Not using a sound card either just using an integrated one The problem I am having is this when talking to someone in Skype my microphone is somehow picking up any output audio that my headset is receiving For example when I m playing any game or listening to music and talking to someone they can hear everything that is happening with crystal clearness This was not happening on my old computer with the same headset So I m guessing it s a Windows thing but I have combed every option and I just don t know what to do They say it sounds like I m not even using a headset at all and people tell me to turn off my speakers and put on my headset all the time when this isn t the case It s not because my sound is on max either if I have the sound at they hear it at the exact same level on top of listening to me talk I have combed tons of forums and even found another thread with the same issue but it was outdated from years ago and no fixes for Windows I realllly need some help Any is appreciated nbsp

A:Microphone is picking up output audio that my headset is receiving

Right click the speaker Icon and select playback devices>>>Communications>>>Mute all other sounds
 

http://www.techspot.com/community/topics/microphone-is-picking-up-output-audio-that-my-headset-is-receiving.176509/
Relevancy 18.92%

Hello,

I need some professional help.
My computer:
AMD a10
4fb RAM
R9270x BY XFX
....
NOW, without the graphics card the computer runs fine. When I install the ddriver's for the r9 it will work, but eventually the display driver stopped working makes its way back.

I've ran all diagnostics on the memory and checked temperstures which all turned out to be fine.

I sent the card into xfx and they returned it saying it's fine.

WTF DO I DO MATES. I think it's the card....but that's just me.
 

http://www.techspot.com/community/topics/amd-and-display-driver-issue.212301/
Relevancy 51.17%

I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp

A:I can hear "computing sounds" from my computer, through my speakers

Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
 

http://www.techspot.com/community/topics/i-can-hear-computing-sounds-from-my-computer-through-my-speakers.202182/
Relevancy 23.65%

Leaked specifications from a pair of upcoming Intel Skylake processors have hit the web. If accurate, we could see Intel pumping out CPUs with high clock rates on par with the company's existing Devil's Canyon offering.

Read more
 

A:Leaked specs for upcoming Intel Skylake CPUs reveal high clock rates, 95W TDP and more

@shawn
I read that the performance jump between Broadwell and Skylake will be like what we saw with Prescott to Conroe. Do you believe this is possible with the unlocked Skylake-S parts? Have you heard this rumour?
 

http://www.techspot.com/community/topics/leaked-specs-for-upcoming-intel-skylake-cpus-reveal-high-clock-rates-95w-tdp-and-more.212186/
Relevancy 49.88%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 24.94%

So to clear out what my hardware is my core is an intel i LGA For a bit of background - A few months back I encountered this problem that my high temperature with too constantly Problem CPU fan started to malfunction Though a few hours later the fan started to work again I used a flashlight to look into the CPU and yeah it was spinning Both of Problem with CPU temperature constantly too high them at equal rates So onto the actual problem I few days ago I just got my PC fixed since my vid card malfunctioned Fearing it was overheating I downloaded speedfan and now constantly check my GPU temperature However what worries me now is that it constantly reads my CPU temperature to be around - Celsius The frightening thing is it s ALWAYS at that range Even when I just turn my computer on despite it being in air-conditioning the temp is always at that range I also asked the guy who fixed my PC and said that it was a problem but that C is standard for a PC that s been used for hours Since I m kind of lazy to screenshot upload I ll just type out what it reads in Speedfan CoreTemp and CPU Thermometer Speedfan GPU C System C CPU C AUX C SMIOVT - C HD C Core C CoreTemp Tj Max C Core C Min Max Core C Min Max Load varies from - CPU thermometer reads relatively the same with a - C range What the hell is up with my PC and what can I do to solve it nbsp

A:Problem with CPU temperature constantly too high

Hello, omni23414.
It could be a miscalculation on the part of the on-die sensors, or a horribly failing cooling system.
I've checked Google for that chip's average temps, and they aren't supposed to be that high.
My CPU isn't a multi-core, so it by default doesn't generate much heat, but it's overclocked enough to make a toast.

Try disabling any 'Quiet fan' features in your mobo's BIOS, and check the temps.
For how long have you had this problem? Only recently, or since Day 1 of the assembly?

Try taking off all the fans and checking them individually. Check whether any fan is malfunctioning. If none is, it could be a case of bad case airflow. Or miscalculated temps.

Still, give me some more details on which programs you mostly run, how much load they give the CPU. I'll abuse Google for more information on your case.

Good luck!
 

http://www.techspot.com/community/topics/problem-with-cpu-temperature-constantly-too-high.179473/
Relevancy 18.49%

Hello,

I own a custom laptop on an MSI 16F2 platform. Few weeks ago my GTX 670M card died.

Out of better options, I bought an used GTX 660M from an acquaintance.

I had it installed, started Windows and everything looked OK. Then I installed the Nvidia drivers and after reboot, right after the loading screen, I got a black screen (with the screen still lit).

I went into Safe mode and uninstalled the driver. Then installed again and got the same result. Went into Bios, change settings, tried resetting CMOS, nothing worked. Installed Windows 7 Ultimate again, then Windows 8, same thing. I also tried the driver modding instructions on this forum, still nothing.

I have no clue what is wrong. If you have any idea, please help me with this.

Thank you,

Fox
 

A:GTX 660M black screen after installing driver

I have connected the laptop to an external monitor and it works with the Nvidia driver installed. The laptop screen works just fine without the drivers. I would really appreciate any form of help. Is it maybe the BIOS?

Thx,
Fox
 

http://www.techspot.com/community/topics/gtx-660m-black-screen-after-installing-driver.211105/
Relevancy 49.88%

I'm trying to record some karaoke but every time I play back the recorded track, the music is "doubled" with a slight delay, as if the laptop's built-in microphone was picking up the music along with my voice. Here is an example:

http://www.singsnap.com/karaoke/watchandlisten/play/c58ef46c3

Notice how those staccato notes are doubled with that slight delay.

I'm using Windows 7 on a Dell laptop with Realtek.
Under Playback I have two devices: Loudspeaker (enabled) and Realtek Digital Output (disabled)
Under Recording I have: Microphone (enabled) and Stereomix (disabled)

I'm recording using headphones and the laptop's built-in microphone. This is what the Realtek Audio Manager looks like:

It's in German but most options are self-explanatory.

If you could help I'd be very grateful.

Thanks for reading.
 

http://www.techspot.com/community/topics/bleeding-when-trying-to-record-on-laptop.211024/
Relevancy 51.17%

I have been having this issue for about 2 weeks now. Ive literally tried everything including uninstalling/reinstalling network card, restore points (there are none), a windows update download, and reformatting the hard drive (wont let me). Any help is appreciated. I cant afford a new pc or any new hardware at this time.
 

A:"Failed to query TCP/IP settings of the connection. Cannot proceed."

failed to query tcp/ip settings of the connectionClick to expand...

what did you do when this occurred?

Describe network equipment {modem, router} ISP, and your system.

Connect it all together, get a command prompt, enter ipconfig /all >myTcp.txt
and come back here and paste the contents of myTcp.txt as your reply
 

http://www.techspot.com/community/topics/failed-to-query-tcp-ip-settings-of-the-connection-cannot-proceed.177223/
Relevancy 42.14%

I have one problem with my PC sound on board,
My pc is windows 7 ultimate 32bit, Intel Desktop Board E210882,
The driver is already install but the icon of sound still red cross like image attach file, I already plug in the headset, any one please help me?

thank, seahong heng
 

A:No audio output device is installed

Well, one way or another, your computer isn't using the device, so have you checked to see if it's disabled in any way? right click the speaker and go to playback devices, it'll come up with a list of your sound devices, make sure the one you're trying to use isn't disabled (right click to change that) if you're unsure which is yours, just enable them all lemme know if that helps at all
 

http://www.techspot.com/community/topics/no-audio-output-device-is-installed.188878/
Relevancy 50.74%

Hi my daughter tried to adjust the resolution and now the screen is Black and stuck on Out Of Range. I cannot even get it safe mode or anything. Just a black screen with the writting. It's a windows xp 32. My son is so sad if anyone knows what to do please help. Thank you.
 

A:PC monitor screen is black & says "Out Of Range"

Repeatedly press F8 while the system is booting.. The very first stuff you see on screen will either be your motherboard splash screen or some text. When you get to the menu where you can make a selection, choose VGA mode NOT Safe Mode. That will boot your computer at 640x480, but it will boot with full driver support, just as if things were normal. Change the resolution to what you want after that.

Remember if you change it to something that goes 'out of range' DO NOT touch anything for 15 seconds. It will revert back to what it was after that time and you can try again.

Unrelated.. Go to school at UMR? or different Miner?
 

http://www.techspot.com/community/topics/pc-monitor-screen-is-black-says-out-of-range.210867/
Relevancy 18.49%

I and Driver responding stopped recovered has purchased an HP-f wm with an Intel N processor about a month ago It s running Windows I also bought a mouse for it since it s not a touch screen that allows me to scroll side to side and makes not having the touch screen easier to Driver stopped responding and has recovered operate The what I thought was Driver stopped responding and has recovered mouse started freezing in the middle of using it to surf the net or working in documents it Driver stopped responding and has recovered just freezes for a bit then starts working again Last night I got an error message after it did this saying the driver had stopped working and recovered I didn t notice that it said which driver I found a fix for this on the Microsoft website but it was for Windows I have tried to do all the updates that it needed when I first got it but I have to do them a few at a time as they fail if I try to do them all at once I have gone through and done several of these one at a time Recent updates have successfully installed it s just the ones needed when I first started using it that are a problem I have about left from Sept-Dec Any advice would be appreciated I got this from Amazon so I have no support nor can I return it nbsp

A:Driver stopped responding and has recovered

Two suggestions:

Try installing the software under "Windows 7" preferances. When you go to install the software (I do not have windows 8.1 myself, just going off Windows 7 features) Right click the installer and go to properties. Under "Compatibility" select "Compatibility Mode" as "Run this program in compatibility mode for" and select Windows 7.

Also select the "Priviledge Level" to make sure there is a checkmark in "Run this program as an administrator"
The other option is to find any driver software that is installed with the mouse and ensure that it is changed to these settings as well. If you want me to go into depth about how to do that I can explain further. But the general idea is to find the .EXE for the software that starts with windows and change the properties to the same as you did with the installer.
 

http://www.techspot.com/community/topics/driver-stopped-responding-and-has-recovered.208879/
Relevancy 18.49%

hello techspot, I keep getting this error when I play games in my computre. what should I do to fix this error?
 

A:Display driver stopped responding and has recovered

I get this error every once and a while. Updating your GPU drivers usually solves the issue. Do you know what GPU you are running? Post your full system specs below and then we can go from there.
 

http://www.techspot.com/community/topics/display-driver-stopped-responding-and-has-recovered.204745/
Relevancy 21.93%

Hi, Could anyone tell me any ideas on trying to get my usb device to work again. Not recognizing on my computer. Went into device managers and can see unknown device. I have tried uninstalled it and pluged it back in but all it says is successful installed unknown device. The computer doesnt even know what it is. Is it possible to try and install a driver for it and tell it that its a usb device?

Thank you
Mitch
 

A:Sandisk Cruzer unknown device

Sometimes the drives just die. This shouldn't be a driver issue, do other flash drives work in the computer? Have you tried this drive in a different computer?

You could open up disk management and see if you can delete the partition and create a new one, or simply format the existing one as NTFS or exfat. WARNING: Doing this will cause you to lose any data you may have on the drive.
 

http://www.techspot.com/community/topics/sandisk-cruzer-unknown-device.209278/
Relevancy 32.25%

I recently replaced my AGP NVIDIA GeForce GT M with a newer AGP NVIDIA GeForce GT M I believe that the GPU processors are the same but noticed when changing over the heat sinks that the memory chips are of the Samsung variety the old one had Nanya The older card had a pre-windows boot BIOS where as the new one needed me to install new 512M 7600GT same Replaced GeForce NVIDIA with drivers from the Nvidia site using automatic driver scan does not BIOS boot My Replaced NVIDIA GeForce 7600GT 512M with same issue is that the Windows reported a BSOD on first reboot after the new driver installation stable since and have Replaced NVIDIA GeForce 7600GT 512M with same since increased the voltage by V to the card spec without BSOD and there is no solution in the Action center and Windows is still looking a month out Upon opening the Nvidia control panel suite to check why the newer card did not have any on board memory to aid Adobe rendering as the last card did use the M vram I found that the suite reports the card as a GeForce GS could this lead to a driver quot signing quot conflict and therefore the BSOD Computer Management reports the card as the GeForce GT as does the device properties driver tab Would it be possible to flash the BIOS on the newer card so that the M of vram is quot scalable quot for Adobe rendering use Thank you for reading nbsp

A:Replaced NVIDIA GeForce 7600GT 512M with same

If you're having a lot of trouble with it I would see about returning it if possible, I see this post is already a few weeks old but hopefully that is still possible..

You shouldn't run into that many issues, although if the card is manufactured by a different company then there "could" be problems.. In which case the safest bet is to go into Safe Mode, remove all drivers and reinstall fresh working drivers. Just to make sure nothing is being mixed up between the way the cards operate,
 

http://www.techspot.com/community/topics/replaced-nvidia-geforce-7600gt-512m-with-same.208853/
Relevancy 24.94%

So I ve been monitoring my computer s temperatures and I must admit I m not happy with what I ve seen After gaming my FX- has been reaching temperatures above the C max recommendation temperatures FX-8320 high Stock with that AMD has in place The highest I ve seen so far Stock FX-8320 with high temperatures is C which is just outrageously high I m running my FX- at completely stock speeds with the stock fan on a Gigabyte FXA-UD rev motherboard Now as of writing this thread I Stock FX-8320 with high temperatures have already ordered a Cooler Master Hyper EVO as my research suggest that this is a very capable fan for an FX- xxx series processor at stock speeds and maybe even a modest overclock as well I actually intended to get this cooler earlier in my system s life but I ve been lazy and frugal and figured that the stock fan would be fine for stock speeds I also figured my spacious Antec case with a ton of fans at max speed would ve been enough Anyway what shocked me is that when I built this system I kept a very close eye on temperatures during gaming and I never would exceed C under load and idled around C Now quite a while down the line the same cooler can hardly keep the processor below C under load but when the machine is idle I get really low temperatures so low it s at C at some points I ve included a screenshot of both these situations So frankly put what the hell is going on here My idle temperatures are better than ever but my load temperatures are worse than ever Could I have an inaccurate sensor on my processor As precautionary measure I already cleaned out all of the dust filters in my Antec quot Illusion quot case photo also included I also opened that puppy up and blew as much dust out as I could off of the components so it s not real dusty in there anymore The heatsink fan combo was properly secured so it doesn t seem to have become improperly seated over this time Despite this I haven t seen an improvement in temperatures Any assistance in figuring out what the deal is here would be greatly appreciated My specs are as follows AMD FX- GHz Vishera Gigabyte GA- FXA-UD rev G Skill Sniper GB DDR - RAM Gigabyte GeForce GTX GB WindForce Western Digital Black TB SATA-III HDD Antec Illusion case Antec HCG W PSU Windows Ultimate SP x x mm Antec fans mm Antec fan nbsp

A:Stock FX-8320 with high temperatures

Have you cleaned the actual cpu cooler? If it has as much dust as your filter does, that could really affect the efficiency of the cooler. I have both a 8320 in a build and a 8350 and I use AIO water coolers such as Corsair H80 or H100.
The CoolerMaster Hyper 212 EVO is a very good air cooler. Take your time mounting it and be sure to use quality thermal paste.
 

http://www.techspot.com/community/topics/stock-fx-8320-with-high-temperatures.202655/
Relevancy 50.74%

For the past month, Nvidia has faced its fair share of bad PR thanks to the GeForce GTX 970's memory allocation issue. As has been uncovered by users and explained by Nvidia, the GTX 970's last 512 MB of VRAM...

Read more
 

A:Nvidia CEO says GTX 970 memory controversy "won't happen again"

Again: the performance didn't change overnight; it's today the same performance than the advertised on launch date. Even that technicality can kill the case. Specifications were the "misleading" part.
 

http://www.techspot.com/community/topics/nvidia-ceo-says-gtx-970-memory-controversy-wont-happen-again.209149/
Relevancy 51.6%

As you've probably heard by now, Nvidia is having a few issues with their GeForce GTX 970 graphics card. In response, AMD has lowered the price of the card's main competitor, the Radeon R9 290X, in an attempt to get...

Read more
 

A:AMD cuts Radeon R9 290X price amid GTX 970 "issues"

Meaning AMD could have been selling the card cheaper this whole time.

AMD needs to stand more firmly in their business decisions. Changing prices on a whim every time the wind blows, shows lack of confidence in their product to sell itself.
 

http://www.techspot.com/community/topics/amd-cuts-radeon-r9-290x-price-amid-gtx-970-issues.208450/
Relevancy 20.64%

Hey ya so I'm having pretty much the same problem and I'm not finding anything you guys are talking about. Here's my problem. Like the rest of you I'm having troubles with recording the audio from my computer using the stereo-mix setting in audacity. This occurs only when my usb microphone is plugged in. I understand that it has something to do with changing the inputs or outputs or something I'm just having trouble understanding where those are on my computer. My setup is this. I'm running on a laptop that has windows technical preview. My microphone is directly plugged into my laptop via usb (obviously) and my headset plugged directly into the microphone. If someone could please tell me step by step where to go on the computer and what to do to fix this so that I can have my microphone plugged in and also record my computer that would be great. I know this is over 2 years old but I'm hoping someone sees this and is able to help.
 

A:Trouble recording audio

I am surprised no one has replied to this yet, but no worries, I will do my best to help solve your problem

So from the sounds of it, you are having troubles with Audacity noticing your Microphone to record audio. Now, I have never used this program before, but from the sounds of it the only thing you are missing is setting your headset/microphone to the default in windows.

Now, I have not used Windows Technical Preview either, but based on how window's has operated since Windows Vista I am going to say it's safe to assume I could point you in the right direction to the very least.

To start, in the bottom right hand corner (Near your time) you have icons. One of them should look like a speaker, right click it and select "Recording Devices" In here you should have the option to make your Microphone the Default device.

Another way to get to this option if it's no longer accessible the way I described is to go to Control Panel, if you have the option in the upper right hand corner of the screen that says "View by:" and change it to large or small icons. There should now be one just called "Sound" in there go to "Recording" at the top.

Now in this window, find out which one is your device, easiest way is to make sure the mic is not muted (a lot of headsets have a mute button on them) and just speak into the mic, you should see the bar fill with a bit of green when you're taking, this indicates it's picking up sound. Set the "Default" to the headset you are using and then close and reopen Audacity (most of the time if the program is open when you change the default, it wont pick up on it)

let me know if any of that worked, didn't work, or you have any trouble finding what I have mentioned.
 

http://www.techspot.com/community/topics/trouble-recording-audio.208161/
Relevancy 47.3%

Hey, I'm a new member here with a problem!

I have a pair of Skullcandy Crushers with an arguably great built-in mic that turn on with a press of a button. However I built a new computer a few days ago and installed the latest version of the ASUS Realtek HD Audio manager, and while the audio on the headphones work, the mic refuses to work and isn't even recognized on programs like Skype and Hangouts.

I have tried the front two ports and tinkered with the settings and nothing has worked as of now, please help ASAP!

-Extabyte
 

A:Skullcandy Crusher mic not working with ASUS Realtek HD Audio Manager

Yeah thats because Skullcandys aren't really built for computers, just iPhone & Android. I had the same issue with my Skullcandy headphones and decided to buy a legit for PC headset. Sorry you spent your money on them!
 

http://www.techspot.com/community/topics/skullcandy-crusher-mic-not-working-with-asus-realtek-hd-audio-manager.204154/
Relevancy 21.07%

I've a External HDD( Western Digital company-500GB) which was working properly last night but today it's not working. when I connect the EXt. HDD to my laptop usb port then it's got power but not shows in my computer.
when I go to device management it shows a window (you need to initialize before logical disk management can access it.) but when I go to initialize the HDD then show it "the media write protected". I cann't initialize the HDD and cann't access the HDD.

Someone help me to recover my old DATA from this Ext. HDD.

Thanks for advance.
 

A:External HDD not recognize my laptop & cann't initialize it from Device manegment

Hello Rajib Sarker,
The first important thing to note here is that if you initialize your HDD you will lose all the information that was stored on it. Sometimes portable external HDDs can behave like that if they are not getting enough power. It would be a good idea to try and connect your HDD using a different USB cable, preferably a short one. Another thing you can try is connecting your HDD to different USB ports and to a different computer. You can also run WD DLG diagnostics tool to test the HDD http://products.wdc.com/support/kb.ashx?id=GTBpZQ .
Hope that helps.
 

http://www.techspot.com/community/topics/external-hdd-not-recognize-my-laptop-cannt-initialize-it-from-device-manegment.207752/
Relevancy 51.6%

I have a mystery on my hands. I received a Bluetooth speaker as a gift. The BT-4.0 adapter plugged into my computer (USB-2.0 port) detects it (as a "Bluetooth headset"), but when I try to select it as my output device (from the "Sound" Control Panel), Windows reports it as "Disconnected".

If I open "Devices and Printers" and right-click the "Bluetooth headset" icon, I get an alert that the device "Failed to initialize".

I've tried rebooting, tried a different BT adapter, updated my BT drivers off the makers' website, Device Manager shows everything is connected & working (including "Bluetooth Audio").

64bit Win7 Home. Inateck BT-4.0 usb adapter. Speaker is a "MicroBoom" BT v2.1:
Any ideas?

PS: Eliminated the obvious. Speaker is fully charged and works just fine with my phone.
 

http://www.techspot.com/community/topics/bluetooth-headphones-paired-but-disconnected-failed-to-initialize.207624/
Relevancy 20.21%

I am running a Windows 7 x64 machine with an Asus motherboard, AMD FX-8350 Eight-core processor, Radeon HD6450 graphics card, 11 GB ram with two monitors. The problem is audio & video are constantly starting & stopping (very choppy). I have updated my os, flash, java and shockwave. All my browsers are up to date. It doesn't matter if I try to play something in a browser or something I have on my computer using windows media player or vlc... everything is choppy. It is constant & is driving me to drink... Any help and/or suggestions would be greatly appreciated.
 

A:Audio & Video choppy during playback

Once check your laptop or desktop chipset drivers are working fine or not, its effects the other related devices functioning. update or install the latest chipset drivers and video and audio drivers which are compatible with your system.
 

http://www.techspot.com/community/topics/audio-video-choppy-during-playback.207417/
Relevancy 24.51%

Hi Sorry for the long post but I wanted to provide as much info as possible for a better solution I have been experiencing strange clicking sounds please see link coming from my XFX HD lately or it can XFX PC noise, 4850 temp HD and clicking then High crashes be from PSU I have been using this card since years It XFX HD 4850 clicking noise, High temp and then PC crashes used to be very rare only at bootup but ever since I have started playing Bioshock infinite it has become much more frequent Initially I did not get any problems playing but last time I could only manage hr and then mins before pc crashed Today when I started the pc there was not any of that sound but XFX HD 4850 clicking noise, High temp and then PC crashes after minutes the hideous sound started and after few seconds pc shutdown This happened again and again with shorter time frames Interesting thing is I did not even played the game was only browsing the potential problem on the net Turns out it can either be -Some hindrance in fans spinning -Coil whine -PSU problem I couldn t pinpoint the exact problem I tried listening to it very closely could only guess that it was coming from gpu it also seemed very hot Using GPUz I started monitoring and gpu temp went from - C range to C within minutes before it shut down So it seems gpu is the reason I put a bit of load on gpu by emulating a game in pj during that time I had got my power outlets checked by a voltmeter few days ago the electrician said they were fine My desktop airflow is good never had a high temp problem with my cpu and side of the cover is always open My questions are -Can I underclock my gpu so that it consumes less power -Do I need to install ccc since I haven t earlier -I used an air blower a couple of months ago and also cleaned the gpu with a brush did nt find much dust or any object blocking the fans I can t rma since I had a bad time doing that in the last few times other h w long wait Also I don t have a built in gfx with this build What do you suggest Thanks Link screens and audio http s tinyupload com index php file id GPUZ min max temps Date GPU Core Clock MHz GPU Memory Clock MHz GPU Temperature C Fan Speed Fan Speed RPM RPM GPU Load GPU Temp DISPIO C GPU Temp MEMIO C GPU Temp SHADERCORE C Memory Usage Dedicated MB Memory Usage Dynamic MB VDDC V - - - - Update After I cleaned my pc again with air blower and also the gpu separately tested the system Starting temps were better from c instead of c and biggest difference was the dramatic reduction in fans rpm previously and now - rpm and noise But bad news is during those - mins the gpu temps kept rising again even at gpu load and once I put a bit of load on gpu - via pj emulater it rised to c before pc shutdown again So does it means I have to apply thermal paste too Or can this be fixed if I update the gpu driver Please any solutions suggestions wil be really appreciated nbsp

A:XFX HD 4850 clicking noise, High temp and then PC crashes

I'm having a bit of trouble following (more than likely my fault). What is the GPU fan speed during load?

If the RPM's seem normal, it could be thermal bond in the thermal paste that is broken.
If the fan speed doesn't appear to be normal, the fan itself could be broken.
 

http://www.techspot.com/community/topics/xfx-hd-4850-clicking-noise-high-temp-and-then-pc-crashes.207299/
Relevancy 25.37%

Hey guys I've got a problem. My GPU GTX780 GHz is making a buzzing / whining sound at very high fps and I mean 300+. I tried to google it but most buzzing seems to be made by PSU however PSU has nothing to do with fps. And I assume that the power consumption is roughly the same when playing Crysis 3 120 fps or Dead Space 2 400+ fps.
Yes I know I could use v-sync but sometime it causes noticeable input lag.

Is it normal? Safe for the GPU? Does it go away?

Thanks for info
 

A:GPU buzzing / whining at very high fps

What is you PSU make and model? When was the last time you cleaned your system out (physically powering down, opening the case and removing all the dust - especially on all the fans)? Do you monitor your internal temps when you game - if so what are they when you game? Have you overclocked anything?
 

http://www.techspot.com/community/topics/gpu-buzzing-whining-at-very-high-fps.207333/
Relevancy 18.49%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
 

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-after-hardware-driver-update.206983/
Relevancy 49.02%

I just got a new computer...with Realtek HD Audio. Specifically: Realtek ALC888S.

The computer has no bass. Music played through YouTube, Winamp, WMP, iTunes, or through games have essentially nothing coming out of the sub.

I do have 5.1 selected, that is what my setup is.

Here is the weird thing. When I plug my MP3 Player into the Line-In and play through there, the bass sounds great. When I play from inside the computer, there is none. Can anyone point me to some places to look inside the Realtek HD Audio Manager? I can't seem to find anything useful in there at all.
 

A:Realtek HD audio, no bass

have you checked the bass management and swap bass and center option? you might want to try checking those option to check if it bring back the bass.

btw also try the 5.1 speaker test to check if all channels sound properly.
 

http://www.techspot.com/community/topics/realtek-hd-audio-no-bass.166680/
Relevancy 19.78%

When I am playing a video with any browser it is very choppy (sound and video).
Even Window sounds are choppy. It seems like if I move the mouse it gets worse.

Computer is very slow to open programs, even though the system idle process
is at 99% before starting another progam. This happens even when no browser is open and the
anti-virus software is disabled.

I don't know is this is a software or hardware issue.
 

A:Computer very slow. Choppy video and audio playback from browsers

Post this here:
http://www.techspot.com/community/forums/virus-and-malware-removal.28/
See if they can help with this problem
 

http://www.techspot.com/community/topics/computer-very-slow-choppy-video-and-audio-playback-from-browsers.207159/
Relevancy 21.93%

My Asus DRW 24B1ST CD/DVD-Rom device works in Dos (bootCD works no problems), and is recognized by my WinXP Device Manager and listed as working properly. But when I try to run or view a disk from My Computer, all I get is a blank window. The window has the correct partition/drive identity, so I know it's pointing to the device, but it just won't interact with the disk.

The same device was working fine in a previous WinXP installation on the same computer, but when I installed another WinXP sp2 (I had lost access to the original installation) I had a few glitches and this is the remaining one that needs to be fixed.

BTW, I can bootup from a bootCD and run a miniXP and have no problem with the CD/DVD-ROM device, so the issue must be with the current WinXP installation.

Any suggestions for repairing this problem?
 

A:CD-ROM device won't open or run disk

Wow very interesting. Yo had mentioned it will boot to disc, have you tried while in safe mode. So if you restart computer and utilize the function f8 button go to safe mode with networking check to see if it works in there. If it does then I assume it is driver related issue. Of course in safe mode it loads minimum drivers to have a functioning safe environment. Even though windows recognizes it in device manager does not mean it has a working driver. I would even go as far as uninstalling the driver and reinstalling one from the manufactures website. You could first try uninstalling the driver then rebooting the computer then letting windows reinstalling the driver upon boot up to see if that fixes it first. Hope this helps let me know what you find.
 

http://www.techspot.com/community/topics/cd-rom-device-wont-open-or-run-disk.206972/
Relevancy 51.6%

Hello It may seem like a simple problem but I know nothing of the subject and I ve had the problem for ages Whenever I copy large files Movie size think MB the copy progresses very remaining" drives "5 sec Copying to/from stuck before for flash on 30 finishing seconds fast MB s until it reaches about where it gets stuck for about seconds to a minute and it says quot Time remaining seconds quot during all that time I have this problem with any flash drive in any USB port amp It also happens when copying to network drives and external harddrives which leads me to think it s a software windows issue Some vital information Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing The flash drive I mainly use is USB quite new and easily capable of MB s writing speeds It reaches about - MB s during the copy until the final point where it still says MB s but does nothing for seconds USB port is also and I ve also tried every single other port in my computer None are broken and none ever show any signs of being slow The flash drive is NTFS formatted but it used to be FAT I ran checkdisk to see if there was anything wrong but there wasn t It s NTFS since I occasionally need files gt GB I tried using TeraCopy to bypass the issue but this way doesn t reach speeds of over MB s which takes even longer in the end It does fix the hanging at issue I tried converting the drive back to FAT which removes the issue of it hanging at but again the speed doesn t go above MB s which means it takes longer in the end making it not worth it What bothers me is that the files transfer at the maximum speed right until the very end where it just magically gets stuck for seconds or more before finishing like nothing happened Please advise P S I shamefully have to admit I never safely remove my hardware nbsp

A:Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing

Marty9231 said:





Hello!

It may seem like a simple problem, but I know nothing of the subject and I've had the problem for ages.

Whenever I copy large files (Movie size, think 700MB+), the copy progresses very fast (~100MB/s) until it reaches about 99% where it gets stuck for about 30 seconds to a minute, and it says "Time remaining: 5 seconds" during all that time.

I have this problem with any flash drive, in any USB port (2 & 3). It also happens when copying to network drives and external harddrives, which leads me to think it's a software/windows issue.

Some vital information:

The flash drive I mainly use is USB 3.0, quite new and easily capable of ~150MB/s writing speeds. It reaches about 120-130 MB/s during the copy until the final point where it still says 130 MB/s but does nothing for 30 seconds.

USB port is also 3.0, and I've also tried every single other port in my computer. None are broken, and none ever show any signs of being slow.

The flash drive is NTFS formatted, but it used to be FAT32. I ran checkdisk to see if there was anything wrong, but there wasn't. It's NTFS since I occasionally need files >4GB.

I tried using TeraCopy to bypass the issue, but this way doesn't reach speeds of over 20MB/s which takes even longer in the end. It does fix the 'hanging at 99% issue'.

I tried converting the drive back to FAT32, which removes the issue of it hanging at 99%, but again the speed doesn't go above 20MB/s which means it takes longer in the end, making it not worth it.

What bothers me is that the files transfer at the maximum speed right until the very end, where it just magically gets stuck for 30 seconds or more, before finishing like nothing happened.

Please advise!!

P.S.: I shamefully have to admit I never safely remove my hardware. Click to expand...

Although I've had the same happen on my downloads, this "P.S.: I shamefully have to admit I never safely remove my hardware." could be part of the problem, good luck.
 

http://www.techspot.com/community/topics/copying-to-from-flash-drives-stuck-on-5-seconds-remaining-for-30-sec-before-finishing.207001/
Relevancy 45.15%

I m trying to configure Surround Sound but Realtek doesn t seem to be installing and it s configuring speakers driver 5.1 Realtek Trouble Sound; issues Surround to driving me nuts I have installed the driver provided by Gigabyte for my motherboard Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues and it s not doing anything It installs asks me to restart the PC but nothing is Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues there OS is Windows -bit Gigabyte says that my motherboard supports both and Surround Sound so I don t understand why I can t configure my speakers to run it only lets me use Stereo Device manager only shows High Definition Audio Device and Control Panel doesn t show Realtek at all Realtek Audio Manager doesn t appear either it s not in the system tray icons where I would usually find it Even searching for Realtek brings up nothing other than all the drivers I have downloaded to see if they would work Link to motherboard s Realtek driver as provided by Gigabyte http www gigabyte com products product-page aspx pid dl Link to motherboard s specification http www gigabyte com products product-page aspx pid sp Image showing my device manager gt sound http gyazo com ad b bd e ae a Any ideas as to what the problem is I can t seem to find anything audio related in BIOS either nbsp

http://www.techspot.com/community/topics/trouble-configuring-speakers-to-5-1-surround-sound-realtek-driver-issues.206888/
Relevancy 24.94%

Now I know this question has been asked quite a few times but the results always vary and it appears really dependent on the hw So Recently I have been hearing an interrupted high pitched whistle from the case It is not too loud but interrupts when pitched High whistle PC coming from somewhere I need to ex read High pitched whistle coming somewhere from PC something and concentrate It is not a singular long beep High pitched whistle coming somewhere from PC but series of small beeps When I opened the case I tried to High pitched whistle coming somewhere from PC listen where it goes from it does not appear to whistle from the electric source and CPU Graphics Net card Motherboard are too close to each other to properly determine I tried to listen with a straw but it always appears to emanate from someplace else when using this method I tried to dust everything firm the screws nothing helped The issue started about two or three weeks back I purchased the PC about a year ago and the user have not reported anything similar the last change was adding a new CPU fan about four months ago The Rig Mobo ASUS M N -AM SLV CPU AMD Phenom tm II X T Processor CPU Fan Coolermaster Hyper Evo Ram x GB PC AM Vga AMD Radeon FDD in apacer sln HDD seagate GB sln E C Cdrom DVDRW LG sln Advice very much appreciated nbsp

A:High pitched whistle coming somewhere from PC

That noise could be either:

FAN
HDD
PSU

Is this system OC = overclocked?
 

http://www.techspot.com/community/topics/high-pitched-whistle-coming-somewhere-from-pc.206833/
Relevancy 33.11%

I replaced my FX- s stock fan to a CM Hyper Evo and when I turned my PC back on it would crash during the quot starting windows quot phase The machine would just reboot and I would be back at the BIOS POST screen So I went ahead and cleared the CMOS which defaulted my RAM back down to the AM platform s native MHz After booting up and seeing my CPU s temperatures were great I went ahead and tried to get my now run 1866MHz CPU Replaced cooler, won't at old RAM RAM back up to its max speed The problem I m faced with is that I can only get it back up to MHz Whenever I set my speed up to MHz I get the Gigabyte BIOS message that there was a problem booting Either that or sometimes it gets to the quot starting windows quot phase before crashing and then sending me back to the BIOS POST screen again This happens when both manually setting the speed or using both XMP profiles At one point I did get it back up to MHz but the system would only detect one of my GB sticks which is obviously single channel as reported by CPU-Z I ve done everything here from switching between which DIMM slots I ve used but no matter what it won t boot with it set to MHz I even Replaced old CPU cooler, now RAM won't run at 1866MHz set my my memory s timings Replaced old CPU cooler, now RAM won't run at 1866MHz manually - - - CommandRate which didn t work Then I tried looser timings which still didn t work Neither XMP profiles worked which is how I had it at running at MHz previously I ve spent hours resetting the BIOS and trying different settings but whatever I do it just won t run at full speed I even stopped my GHz overclock to see if that would fix it I also raised the RAM voltage which did nothing I also tried using the FSB instead of the multiplier to get it up to speed but that would just continue the crashing trend I m really perplexed here guys How the hell did changing my CPU cooler make it impossible for my memory to run at full speed When I pulled my CPU out to change coolers maybe some how I damaged the chip s memory controller or is that just stupid for me to even think Maybe I can borrow my friend s FX- next weekend and see if changing chips will fix it I ll probably have to run memtest tonight now that changing the DIMM slots didn t fix anything For the record this is my RAM http www newegg com Product Product aspx Item N E Here are my specs just in case any help is REALLY appreciated guys as I d really love to run my RAM at MHz the way I paid for it run AMD FX- GHz Vishera Gigabyte GA- FXA-UD rev G Skill Sniper GB DDR - RAM MHz Gigabyte GeForce GTX GB WindForce Western Digital Black TB SATA-III HDD Antec Illusion case Antec HCG W PSU Windows Ultimate SP x nbsp

A:Replaced old CPU cooler, now RAM won't run at 1866MHz

An old system is likely to have voltage issues due to a degrading PSU. test and replace the PSU. Ram also may have suffered. I will start with a fresh PSU.
 

http://www.techspot.com/community/topics/replaced-old-cpu-cooler-now-ram-wont-run-at-1866mhz.202990/
Relevancy 51.6%

Please help.. Can't connect to the wifi but using ethernet is working fine.. My phone could connect to the same wifi though
tried to backread some of the threads but didn't work on my laptop
 

A:Cannot "fully" connect to wifi but works fine on ethernet

Additional info. I am using Atheros AR5006EXS Wireless Network Adapter
and I did deleted the driver and it installed again automatically, but sadly it still doesn't work
 

http://www.techspot.com/community/topics/cannot-fully-connect-to-wifi-but-works-fine-on-ethernet.206650/
Relevancy 50.74%

I've been having an issue which started this morning. The previous night, I forgot to plug in my Dell Inspiron N5050 after using it. I woke up to find that my battery had died (obviously). I plugged in the laptop, running Windows 7 HE 64 bit, and turned it on. It booted normally and I was able to do all of my tasks as needed. Then I noticed my problem. The battery icon down on the taskbar showed that the device was plugged in, but was not charging. It has stayed at a constant 2% charge for more than 24 hours now. The Battery Meter stated that my battery is performing normally, so I ruled the battery out as the cause. The adapter I am using is the default one that came with the laptop when I bought it, and it appears to be functioning normally as well. What could be the cause of this incident, and what can I do to fix it?
 

A:Battery Stated as "Plugged in, Not Charging"

Most likely you have a bad battery. Dell has had whole series of batteries that they shipped out in a not fully functional state. I have an HP laptop (about 8 years old now) that the battery took a "steamy one" and it will no longer charge properly. You can try this trick (it may not work, but worth a try because did work for me a couple times): power down laptop and take the battery out for 30 minutes; replace battery and plug in charger but do not power on; wait 4 hours of charge and power on. I had it work a couple times that it gave a full 100% charge. Again, if it doesn't work then sorry, but at least you tried.
 

http://www.techspot.com/community/topics/battery-stated-as-plugged-in-not-charging.203683/
Relevancy 26.23%

I replaced the mobo on my Dell 5510. Purchased from Dell. Sticker on mobo says BIOS ver A05. About every other day I get blue screen and physical dump of memory. My system info says my BIOS ver is A07. How do I go about changing BIOS? Is it as simple as pulling battery for 15 seconds? Some have offered this suggestion but I get a little worried at "friends" advice.
 

A:Replaced MOBO on Dell 5510 BIOS sticker on MOBO says A05, system in still has BIOS of A07

Removing the battery won't change the BIOS version. You need to download the version you require from the Dell site. From Windows you "flash" the BIOS. Take your time preparing for this. If anything goes wrong you will wreck your motherboard.
 

http://www.techspot.com/community/topics/replaced-mobo-on-dell-5510-bios-sticker-on-mobo-says-a05-system-in-still-has-bios-of-a07.206391/
Relevancy 21.07%

Hi,

I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )

I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.

My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . : 172.22.155.137
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 172.22.155.138
And when I try to do nslookup:
C:\Windows\system32>nslookup
Default Server: google-public-dns-a.google.com
Address: 8.8.8.8

The default server shouldn't be that thing. please help. Nor the address

Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
 

http://www.techspot.com/community/topics/your-computer-seems-to-be-correctly-configured-but-the-device-or-resource-dns-server-not-respondin.206332/
Relevancy 49.88%

I used RV042 10/100 4-Port VPN Router. I've configured the dual WAN, and enable Load Balancing for faster internet. But if I accessedhttp://ipchicken.com/ my IP Address is always chaging? How can I setup the router sticking to just one IP address?
 

A:How to "Load Balance" without changing the IP?

Let me preface by saying....taking two circuits and using them at the same time, even with protocol management from the LB is most likely not worth the effort.

But for the sake of the argument, the first hurdle you have is that both circuits need to have static IPs. What type of connections are they?
 

http://www.techspot.com/community/topics/how-to-load-balance-without-changing-the-ip.205897/
Relevancy 20.21%

I am getting a clicking noise, but it is purely audio based, I have razer kraken pro 7.1's, and a stereo with a headphone jack conector and the harman Kardon speakers that came on my laptop. No matter which audio out put I choose, it still makes this almost metronome clicking.
I checked a lot of different settings, but cant find anything wrong?
Does anyone have any ideas what it is?
Please let me know if you have had or are having a similar problem.

Thanks
 

A:My Toshiba is making a clicking noise through audio out put

Could be a failing hard drive...
 

http://www.techspot.com/community/topics/my-toshiba-is-making-a-clicking-noise-through-audio-out-put.205782/
Relevancy 19.78%

Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
 

A:Audio wont work on asus x53u laptop

Did you fix this?
 

http://www.techspot.com/community/topics/audio-wont-work-on-asus-x53u-laptop.204577/
Relevancy 25.8%

Hello guys,
I built myself a new PC and it is pretty loud so I am worried I didn't made a good seal between thermal paste and a CPU, I use a stock AMD cooler and the CPU is AMD Athlon X4 760K, no overclocking.
Max temperatures that my BIOS showed was I think 69°C-71°C.
Should I be worried and should I replace thermal paste or it's all OK?
Thanks in advance.
 

A:High temperatures on AMD CPU?

That seems a bit hot. AMD recommends that the 760K stay below 74C and you are approaching that point. I would recommend putting $35 into a Hyper 212 Evo. that will ensure cool temps on the cheap.
 

http://www.techspot.com/community/topics/high-temperatures-on-amd-cpu.205049/
Relevancy 34.83%

Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.
 

A:Dell 27" 5K Monitor

VitalyT said:





Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.Click to expand...

And I thought 4K was crazy high resolution already xD.
 

http://www.techspot.com/community/topics/dell-27-5k-monitor.205015/
Relevancy 25.8%

Hi guys
lately I changed my windows from 7 ultimate to another 7 ultimate
then my hell started ... my CPU Usages just jump high with out any reason ... when no program running it jump to 15% ... browser take more than it should take ... and if I open any online game it jump to 70-80% which should not happen I used to open all things I want at once and have near 20% cpu usages
I tryed every think closed back gorund programs and scan for virus or malwares I tried a lot of things but still nothing no change still high ...
how can I fix this ?!!!!
 

A:High CPU Usage

Hello, can you post your full system specifications? Also, are you sure this new Windows 7 copy is legitimate and not pirated?
 

http://www.techspot.com/community/topics/high-cpu-usage.204817/
Relevancy 48.16%

Hi, when I typed " dxdiag " it said n/a, last time I checked there was something written in it..
 

A:When I typed " dxdiag " it said n/a

Check your graphics drivers and install the latest one.
 

http://www.techspot.com/community/topics/when-i-typed-dxdiag-it-said-n-a.204746/
Relevancy 43%

"No Audio Device" is the message I get when I try to adjust the volume from my "Start" button. I have an old Dell-Optiplex270 running Windows XP with an external speaker unit. I have "RealTech Audio Device" and VLC" Media Player. I read where I need to download "SoundMAX". Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
 

http://www.techspot.com/community/topics/no-audio-device.204166/
Relevancy 21.5%

I have headphones through onboard audio set as the default playback device.

I have HDMI set to listen stereo mix (onboard) under recording devices so that I can get duplicate audio on my headphones and TV.

Windows 7 likes to set as HMDI audio as the default playback device when I am not looking (assumedly shortly after rebooting, but not quite sure when). And then I get no sound from my headphones because the programs are all playing on HDMI.

Is there way I can fix this?
 

A:HDMI hijacks default playback device

Hmm; I think HDMI is mutually exclusive to pc { speakers & headphones }. If the HDMI senses a signal to the tv, then the others go off.

right-click on the speaker icon in the tray and view/set the playback devices
 

http://www.techspot.com/community/topics/hdmi-hijacks-default-playback-device.204095/
Relevancy 31.39%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,

Steve
 

A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP ® Support
 

http://www.techspot.com/community/topics/replaced-failed-motherboard-now-how-do-i-determine-model-number-and-which-bios-to-download.203956/
Relevancy 34.83%

My sister's 13" MBP (2011) died a few hours ago. According to what she told me, she was using it, and then, poof, black screen and no power. She doesn't have the cash at the moment to have it properly checked by a tech, so I did a basic troubleshoot in an attempt to narrow things down.

While the internals are a bit dirty, I didn't see any obvious signs of physical damage (it was relevant to check for this). Furthermore, the machine doesn't seem to respond to any power sources. I tried a couple different power cables and, while the little amber light on the magsafe (sp?) tab will come on briefly, the computer with neither power on nor display a charge on the built-in charge indicator. I will also note that the machine failed while disconnected from an outlet source with a full battery indicated.

My initial conclusions are a) the computer fried itself or b) the battery is toast. Any suggestions?
 

A:2011 MBP 13" Won't Power Up

If no one here can offer any insight, I would post this to the Apple discussion forum. There are usually people there that can diagnose this from just a description so that is your best bet.
 

http://www.techspot.com/community/topics/2011-mbp-13-wont-power-up.204013/
Relevancy 34.4%

I'm wondering whether I can overclock my ASUS R500VD notebook it has an INTEL sandy bridge core I5 3210M 2.50 GHz processor 4GB (max 8) of ram running puppy linux and windows xp home edition SP2 32 bit I have benchmarked it and ill email the results to anyone who replys and gives me their email and if you're wondering why I'm running windows xp read my article in the Alternative OS section of the forums called "If all else is too hard try puppy linux" bye
 

A:Can I overclock my asus notebook 17"

Nope sorry, the I5 3210M isn't OC enabled.
 

http://www.techspot.com/community/topics/can-i-overclock-my-asus-notebook-17.202019/
Relevancy 34.83%

Hi all,
I have an Acer Aspire Z5610 AIO computer.When I first bought it a few years back the @ and " were transposed.Hit the @ and " would come up and vice versa.At the time I contacted someone (can't remember who) and with their advice I was able to correct the problem.Due to age the PC was running v.slowly,painfully so.I decide to revert back to Factory default settings,unwisely it turns out,but the old problem of @ and " transposition is back.Has anyone out there got a solution to this problem.It is fixable as I have done it before,but how !!!
Thanks in advance,
Frank.
 

A:Keyboard @ and" are transposed

It's not really a problem particularly as you know which keys to press to get @ or ". This is one of the few differences between UK and US keyboard layouts. You can change the English language version from one of the options in Control Panel.
 

http://www.techspot.com/community/topics/keyboard-and-are-transposed.203000/
Relevancy 24.08%

Hey everyone I own the Acer Aspire G- and I ve had it for a little over two years now One 5552G-7641 Aspire with Temperatures Acer Extremely High of the main problems I have with it is its temperature Right now when all I have open Extremely High Temperatures with Acer Aspire 5552G-7641 is Firefox and iTunes the temperature according to Speedfan is as follows HD C Temp C GPU C Core C I have the rear of my laptop suspended about cm in the air by putting two bottle caps in the rear corners This is an attempt to promote better cooling When I play video games it overheats to the point that the laptop shuts off automatically I understand that the majority of overheating issues is not cleaning enough And indeed I have never cleaned my laptop before However opening the laptop or bringing it to a tech-guy is not really an option at the moment I have read on many forums that using compressed air is efficient but I have also read that it can be extremely dangerous on laptops because of water moisture Also they seem to only pertain to desktops With that said I am here to ask for advice as to what to do with this thing The only ventilation hole is on the left of the laptop and takes up about of the side If any additional information is needed I will gladly provide it Thank you nbsp

A:Extremely High Temperatures with Acer Aspire 5552G-7641

Speedfan is not accurate 95% of the time. Tell me the readings using Realtemp: http://www.techpowerup.com/realtemp/.
 

http://www.techspot.com/community/topics/extremely-high-temperatures-with-acer-aspire-5552g-7641.192887/
Relevancy 21.5%

Hello,

I have a problem when I turn on my laptop I get a no bootable device, hit any key prompt. There are no options in the boot manager. I am able to get into the BIOS by pressing the f2 key I think but I really have no idea what to do from there. Any help would be greatly appreciated,

thanks
 

A:Packard Bell Easynote TE No bootable device

Sounds as though your hard drive has went bad.. Once you get into bios see if it is reporting your hard drive. If not the its rather safe to say . Your hard drive is bad.
 

http://www.techspot.com/community/topics/packard-bell-easynote-te-no-bootable-device.203273/
Relevancy 19.78%

So I have windows 7 installed on my pc ..... I cant hear any sound from my headphones or speakers whether plugged into the front or rear panel. and also windows shows that there are headphones plugged into the front panel. maybe that's the reason I cant hear any sound....but I tried all possible ways....also disconnected the front panel from the motherboard but still it says its connected.
 

A:Front audio jack panel wont disconnect in any way

Have you checked out the Sound section in Control Panel. Also check Device Manager.
 

http://www.techspot.com/community/topics/front-audio-jack-panel-wont-disconnect-in-any-way.202869/
Relevancy 20.64%

Hello, im using

Windows 7 64bit
Motherboard Name Intel Whitesburg DP55WB
Realtek ALC888/1200 @ Intel Ibex Peak PCH - High Definition Audio Controller [B-2] PCI
Headphones steelseries syberia v2 - 3.5mm jack

this is integrated sound card

so my problem is, what not working balance. then I press test, the sound must come from left to right ear, but it comes from both always, even I do all volume on right ear it anyway plays on both sides.
Even I delete driver, on default win7 driver remains same problem.
I tried to use earbuds, another headphones still same.

now im thinking just buy sound card to solve problem
 

A:Audio problem

I solved, so problem was my razor black widow keyboard it has 3.5mm jacks, so my headphones plug dont stick full.
im so shocked how razor failed
 

http://www.techspot.com/community/topics/audio-problem.202664/
Relevancy 42.57%

My laptop had headphones plugged in because I was watching a film but while I was in another room my laptop was knocked onto the floor around - ft drop change mic to a HD audio headphones Realtek port? port a manager, landing on the headphones jack the wire is fine but the ports completely broken I can see cracks and its loose and everything The laptop has Realtek HD audio manager and in my experience of this program on other desktops I ve had I was able to change Realtek HD audio manager, change a mic port to a headphones port? what port does what My laptop only has a headphones port and Realtek HD audio manager, change a mic port to a headphones port? a mic port and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic however in Realteks audio manager I can t find out how to do this In pictures I ve seen on the internet there is a quot Device Advanced Settings quot button as seen in this picture http www vistax com attachments ealtek-hd-audio-driver-version-hd manager jpg but my program doesn t have this Do I need to download a newer version of the software or is it just not possible to change my mic port to be my headphone port I dont mind if I have to use third party software I just want it to tide me over till I can get it sent away Thanks for suggestions greatly appretiated nbsp

A:Realtek HD audio manager, change a mic port to a headphones port?

I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.

Your best bet is to get the damaged port repaired.
 

http://www.techspot.com/community/topics/realtek-hd-audio-manager-change-a-mic-port-to-a-headphones-port.166497/
Relevancy 29.24%

Hello
I have an Acer E1-571 suddenly I have an X on my audio controller icon on home page and no audio devices in control panel. I have tried installing sound video and gaming controllers and then tried to install update but it says best already installed and still no Audio.
Any and all help greafully appreciated and many thanks in advance
 

A:Audio Disabled no audio devices windows 8

Look for audio drivers on the motherboard CD delivered to when after purchasing your system. If you can't find it or don't have mobo CD around, navigate to manufacturer website and download driver for audio device from there.

Good luck!!
 

http://www.techspot.com/community/topics/audio-disabled-no-audio-devices-windows-8.202541/
Relevancy 20.64%

I was not sure on what board to post this.
When running Windows XP on my older computer I could play an enhanced CD that besides a full tack of music I would also see really nice graphics in the beginning where I could make selections to see maps and different info.
Now that I am running Windows 7 I only have the option of hearing the music.
Any ideas as to what the problem may be?
 

http://www.techspot.com/community/topics/enhanced-audio-cd-problem.202328/
Relevancy 17.63%

Hi, my relatively new "HP ENVY TouchSmart m7 Notebook PC" has been having crippling lag while playing video games. The lag slows the computer down to about 0.2-0.5 frames per second, and slows the audio down to match the video speed (which produces a grinding sound). This lag happens every 10-45 seconds depending on how long the computer has been running. Some help would be appreciated.
 

A:Grinding audio/video lag during video games (CPU related?)

What antivirus program are you using? Is the notebook fully updated using Windows Update? Are you running Windows 8.1?
 

http://www.techspot.com/community/topics/grinding-audio-video-lag-during-video-games-cpu-related.201939/
Relevancy 21.93%

I just bought a

Amd A6 6400k apu

ecs a55f2-m4 motherboard

kingston hyperx 4gb 1600 ram

and I installed all drivers but even when I try to open solitaire it says no suitable graphics device found.
 

A:No suitable graphics device found

Which graphics driver and version did you install?

AMD Catalyst 14.4

32-bit Catalyst Software Suite
64-bit Catalyst Software Suite

 

http://www.techspot.com/community/topics/no-suitable-graphics-device-found.202170/
Relevancy 80.41%

Hi I have an older PC which I gave to my mum It originally ran Vista but I bought and installed Windows Ultimate around weeks ago after it had been inactive for months It was running great but a couple of weeks ago it just started hanging for no real reason Also at startup it would say that the computer had not been shut down properly even if it had This was only when it was switched off at the wall not after checksum defaults loaded" replaced error battery after - "cmos a restart or when the PC was left plugged in and switched on She only "cmos checksum error - defaults loaded" after battery replaced uses the PC to look at You Tube and some webcams from her grandkids and that s it she s not very computer literate Initially I left Windows repair to run overnight but when I looked at it the following morning it was still in the repair screen so I assume it had hung I spoke to a local repair shop and they suggested I test the RAM test the hard drive and replace the CMOS battery The RAM and hard drive checks went without any errors and after I replaced the battery the hanging stopped I played with the computer all evening and shut it down as normal and switched it off at the wall Next day I thought I would start it up just to check it and I was faced with a quot cmos checksum error - defaults loaded quot message I thought that was strange but maybe the battery was dead so I swapped it over with one from my perfectly working desktop to try it out and my desktop worked fine but after shutting down my mum s one it had the same problem when power was pulled So battery was ruled out Incidentally I will say that I reset the BIOS date and time every time I was faced with the error following up with a save and exit It worked fine until I unplugged the computer I then moved on to the BIOS and set it back to default and the same again After this opened the case and used the jumpers to reset the BIOS to default again but no difference My mum will not leave it switched on at the wall constantly in case it self-combusts same with her washing machine TV lamps etc otherwise I would just do that and ignore it Is there anything else someone can suggest that I try System Shop bought by Mesh Motherboard is an ASUS PSN-E SLI gb Ram - samsung gb hard drive - ASUS Thanks for any help nbsp

A:"cmos checksum error - defaults loaded" after battery replaced

I must add that the PC is the same as when I bought it new from the shop, except for adding a Creative Labs sound card (approx 2012) and installing Windows 7 (around 6 weeks ago). All Windows updates are downloaded and installed.
 

http://www.techspot.com/community/topics/cmos-checksum-error-defaults-loaded-after-battery-replaced.201304/
Relevancy 18.49%

Greetings reader

So im using a Radeon HD 6870 in my MSI 890gxm-g65.
Installed the hardware and when I run it on on-board graphics, windows is able to detect it as ATI Radeon HD 6800 Series. But after installing the driver for the 6870 it asks for a restart.
The BIOS screen is visible but after the windows loading screen the display just goes off, the LCD in on but it's just black screen.

I have a lot of work to do, so ill be really grateful if someone is willing to help me.

Thank You
in advance.
 

http://www.techspot.com/community/topics/hd-6870-not-working-after-installing-driver.202017/
Relevancy 50.74%

My dell 1905fp finally crashed after a lot of years. I'm not a gamer, but I was very happy with that monitor.

Of course they no longer make it, and I understand refurbished monitors of this type are not necessarily a good option.

I can't seem to find reviews or comparisons which point the way to other similar monitors. I'm retired and just can't afford the $600 and way up price of what I've seen so far.

I just need a basic monitor with VGA and DVI, but would like the screen performance to be decent, incl for watching movies etc.

Any recommendations, and where to get a reasonable price? Again, don't want a wide screen.

Thanks much!
 

A:Reasonably priced 19" or 20" monitor, not wide-screen?

Nothing wrong with buying refurbs. They may have a few blemishes in the frame but nothing serious to keep them from functioning. I've bought a few myself and have had no issues with them. Although the monitors I bought were 20" widescreens that averaged $120 or less. For what you need/want, I wouldn't spend more than $150.

I know you said no widescreen, but movies do view better on widescreen.

http://www.amazon.com/Dell-UltraSharp-1905FP-Rotating-Landscape/dp/B00091R6KC - less than $100
 

http://www.techspot.com/community/topics/reasonably-priced-19-or-20-monitor-not-wide-screen.201641/
Relevancy 20.64%

I accidentally deleted IDT audio from the contol panel. Because of this, the audio is not working. Therefore, I tried downloading it again but my laptop responded with [error, declined, your computer does not reach the requirement ect]
Just to clarify I have a hp laptop windows 7.
 

A:Audio is not working

It could be the driver you downloaded not compatible to your system.... are you using 32bit or 64bit? if you are using 32bit then download only driver for your audio according to their compatibility..likewise in 64bit..
 

http://www.techspot.com/community/topics/audio-is-not-working.201819/
Relevancy 33.11%

I have networked PCs before many times successfully so this is not my first time trying to network PCs in a home environment Though I m wondering if Windows is part of the problem I would have thought that for sure until one of the name credentials bad password? user with unknown even correct failure: or "Logon new laptops running W would not connect to any of the other three PCs Laptops running W Yet these other three W PCs Laptops CAN connect to this laptop Then it gets a little more "Logon failure: unknown user name or bad password? even with correct credentials interesting this same laptop that couldn t connect to those three W PCs Laptops CAN connect to a Windows desktop and a XP Laptop and those two can also connect back to it without issue It s almost like my network is divided in half and only half can talk to each other But then when I thought it couldn t get any more interesting I realized the first three W PCs Laptops can talk to the others it s just that the others W Laptop W Desktop XP Laptop can t talk back to them without getting the error quot Logon failure unknown user name or bad password even though the username and password are correct I don t fully understand this error because on the surface it s just WRONG My username and password are correct but it appears something somewhere is interfering or hijacking the authentication process Three of the computers laptops are brand new just purchased last week and setup this week The HostPC is also fairly new just purchased last month I am not using a HomeGroup and have removed all computers that were part of a HomeGroup I have enabled file sharing and network discovery and enabled Use user accounts and passwords to connect to other computers on all PCs I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it It is a Sagemcom Model F ST N All computers are connected wirelessly Time is correct on all PCs I cannot use Group Policy since they re all Standard or Home edition DHCP is enabled and all computers are on the same subnet using the x range of ip addresses The six computers are as follows I figured this may make is easier to visualize the layout HostPC HP Desktop W PC Name DrsBlend U N DrsBlend p w not showing my real password PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Desktop W SP PC Name DrsBlend- U N DrsBlend P W PC Dell Laptop XP SP PC Name DrsBlend- U N DrsBlend P W Every PC stated above has the same user name and password and is logged-in with the username DrsBlend and the password The quot Logon failure unknown user name or bad password happens when trying to access HostPC PC or PC from PC PC or PC The HostPC can see and connect to all the PCs but only PC and PC can talk back or access the HostPC It s like the HostPC and PC and PC are in their own little clique and can talk back and forth to each other Those three PCs can also talk to PC PC and PC as well but PC PC and PC cannot talk back to them HostPC PC PC Profile corruption I would have entertained that thought but the fact the first three PCs can access and talk to one another kind of defeats that idea and the fact the PCs were just recently setup Firewall Disabled and disabled TrendMicro with no change With them on off the first three PCs can still talk to each other and the rest of the PCs Anyone have any additional suggestions nbsp

A:"Logon failure: unknown user name or bad password” even with correct credentials

I experienced a similar problem when I was trying to network my 8.1 machine the host network. As you say the host PC can see and connect to all of the machines, but not the other way around. Not sure if it is the same in your situation but I found that Microsoft's idea of network sharing on the Windows 8 class of OS differs greatly from previous OS's in that you can connect to it from an external host, but when trying to do the other way around it doesn't "see" the PC in question due to differing network sharing protocols included in the OS.

Anyone feel free to correct me if I am wrong, I am speaking only from what happened with my network.
 

http://www.techspot.com/community/topics/logon-failure-unknown-user-name-or-bad-password%E2%80%9D-even-with-correct-credentials.201313/
Relevancy 33.97%

So newegg is offering the Acer 29" B6 B296CLbmlidprz IPS monitor for about 350. Seems like a pretty good deal but I can't find many reviews on it. I was wondering if anybody had any experience with this monitor and/or if you guys have better options for someone who is looking for an IPS monitor below 400 bucks. I want to game with it as well as do some 3d modeling and photoshop work. So I need reasonable response time for gaming. I was also looking at the HP ZR2440w and was gonna get that until I saw this deal on newegg for a larger monitor. 24" models are fine but if there are good deals on some 27" inch ones then I would be interested in those as well. Any suggestions? Thanks.
 

A:Question on Acer 29" monitor and other monitors

Heres the link for that monitor.
http://www.newegg.com/Product/Product.aspx?Item=9SIA24G1GC2421
 

http://www.techspot.com/community/topics/question-on-acer-29-monitor-and-other-monitors.201698/
Relevancy 20.64%

Hello, everybody. Sorry if this is the wrong category.

I've got a relatively new HP Envy 4-1035TX Ultrabook Laptop and I've had this problem lately: while playing a YouTube video or a song from my iTunes library, it keeps slurring and crackling. The problem is very sporadic: sometimes it will not slur at all, but other times it will once every 10 seconds. Playing a video in BS Player works perfectly fine, though.

Thanks in advance.
 

A:Audio and Video slur

What version of Windows are you running? Is Windows fully updated using Windows Update until there are no more updates are found?
 

http://www.techspot.com/community/topics/audio-and-video-slur.192909/