Windows Support Forum

Build 7077 - Should I download it?

Q: Build 7077 - Should I download it?

I only recently downloaded, and installed Build 7068. I have very limited download and upload speeds and my bandwidth is limited. Is there anything that is really worth it so much that I should download 7077 (besides that it is an RC build)?

Relevancy 100%
Preferred Solution: Build 7077 - Should I download it?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Build 7077 - Should I download it?

HI Termana ,Not that I have noticed,but then again it may have fixed a lot of issues, that I didn't have in the first place.Purely up to you.

http://www.sevenforums.com/general-discussion/6697-build-7077-should-i-download.html
Relevancy 79.55%

Hi all Just a couple of points Both x- bit versions W build -- OK W build -- few glitches install had to Vs 7077 Build x-64 better 7077 anyone. 7100 for me uninstall some pre-existing drivers on quot Upgrade quot before it would install -- and you've guessed it -- couldn't re-install the drivers again On quot New install quot drivers wouldn't install in Build 7100 Vs 7077 x-64 anyone. 7077 better for me any way --even in compatability mode some rd party apps ran fine in build but quot Crap out quot in NET is totally hosed and bollixed up in -- hopefully this will be fixed by RTM Cannot install ANY Net apps -- worked fine in rd party TV application doesn't run AT all in -- I NEED this for viewing composite video -- WMC is fine for normal TV viewing Performance wise both builds seem OK However if this is RC Build 7100 Vs 7077 x-64 anyone. 7077 better for me it seems a couple of steps backwards from build as far as installability and compatability are concerned I'll leave it for a little while longer but my gut feel currently is to revert back to build until some fixes or quot Service packs quot come out Cheers jimbo

A:Build 7100 Vs 7077 x-64 anyone. 7077 better for me

cllean install?

http://www.sevenforums.com/general-discussion/8058-build-7100-vs-7077-x-64-anyone-7077-better-me.html
Relevancy 68.8%

Did anyone have major problems with build 7077? For me it was so bad, that I had to put vista back on the machine. I never had any major problems with build 7000. 7077 had nice features, but none of my movies would play or for that matter even be recognized as movie files. Most of my software didn't work right, but the graphics problems that 7000 had were gone in 7077. Don't get me wrong, I did like what I saw in 7077, but until at least RC1 comes out, I will be using vista 'til then. I just hope 7077 isn't a preview of the RC. It's funny though that vista has been out for how long now and I just found a bug in the x64 version that M$ say they are going to make a patch for in an upcoming update. We will have to wait and see about that one.

A:Build 7077 x64

It was fine for me. Did you upgrade install by any chance?

http://www.sevenforums.com/general-discussion/8175-build-7077-x64.html
Relevancy 68.8%

  
Quote: Originally Posted by torrentg


......
Every time there is a leak, it is always both x86 and x86-64. ...........



Where's build 7077 X-64 -- not a sliver of a hint "on the usual places" yet.

Cheers
jimbo

A:Where's build 7077 X-64

I think they meant in the end, so far i think there have been leaks of both for each build.

http://www.sevenforums.com/general-discussion/6789-wheres-build-7077-x-64-a.html
Relevancy 67.94%

Hi all Hapy Easter etc Although I wasn't going to I couldn't resisit the temptation - downloaded build X- thanks to Soligor and his Russian contacts Download fine -- mins approx -- plenty of seeders now Noticed though on Network Discovery I randomly See XP machines on the network but randomly don't see them either -- seems to be totally unpredictable when the machines are visible These machines are logged on However there's absolutely no problem in quot Manually connecting quot using connect network drive and then specifying the actual UNC address such as via xpmachine name share name Of course you have to know the share names if you connect like this If you don't know the share name then you are totally screwed Doesn't matter whether Firewalls or on or off - same problem Weird Machine is fine in build x- All networked XP machines always available Looks like these later builds are doing things with Networks Cheers jimbo

A:Network Bug(? maybe) in build 7077 X-64

I have the same thing going on Jimbo.....I have 7077 x86 on one machine and 7077 x64 on another. I also have XP on the 32bit machine and am now noticing the same thing. 7068 worked fine but 7077 is not working automatically. I wonder if it is a bug? I just got it installed (the x64) and had to come to work. Let me know if you find a fix later in the day.

http://www.sevenforums.com/network-sharing/6845-network-bug-maybe-build-7077-x-64-a.html
Relevancy 67.94%

Does anyone know the expiration date of W7 build 7077? Is it the same for both x86 and x64?

A:Build 7077 Expiration

click on run in the start menu and type in winver and that will show you a date that it will be nuked.

http://www.sevenforums.com/general-discussion/7292-build-7077-expiration.html
Relevancy 67.94%

The last problem I have if you remember was the motherboard was 'dead'. No power to USB devices, monitors, etc. Well, now it's happened again. I didn't even overclock it after I reset the CMOS battery. Any idea why it happened this time

A:Problem with build 7077 again :(

I had to reset my CMOS battery yet again -_-

http://www.sevenforums.com/general-discussion/7535-problem-build-7077-again.html
Relevancy 67.94%

I'm going to install 7, but I was kinda waiting for the RC. I don't know if build 7077 is RC or not, so if you guys know, that would be good... Also, is it good? I mean, does it have good performance and stability? And is it buggy?

A:So is build 7077 RC and is it good?

Reading around the forums will get you the answers that your searching for. In short I don't know whether it will be the rc but very much doubt it. As for stability and performance it is spot on in both departments. Just look around the forums like I say and you will get all the answers and more.

http://www.sevenforums.com/general-discussion/6855-so-build-7077-rc-good.html
Relevancy 67.94%

My father patched the TCPIP.SYS file and it got corrupted, the file is in Windows/system32/drivers

Could somebody who has installed build 7077 please email the file to me at
m a x w e l l AT s k i l l f u l g r a p h i x DOT c o m (remove spaces and CHANGE to Symbol),
so we do not have to do a fresh install.

It may be best to .zip or .rar it

Thank you

Responders will get rep

A:Please Help! Need Build 7077 File

Please do not post Email links on this Forum for security reasons.
Try opening the Elevated Command prompt and type scf /scannow and hopefully that will fix it.

http://www.sevenforums.com/general-discussion/6746-please-help-need-build-7077-file.html
Relevancy 67.94%

Hi all
I installed Adobe reader 9.1 on W7 build 7077 X-64.

IE8 (32 bit) however doesn't automatically open PDF files any more -- no problem with downloading the document and manually opening it.

Cheers
jimbo

A:Adobe 9.1 and IE8 on X-64 build 7077

Have you run the Updater?

http://www.sevenforums.com/network-sharing/7430-adobe-9-1-ie8-x-64-build-7077-a.html
Relevancy 67.94%

I have installed on my notebook the W7 build 7077...
It works fine in the first week, I was really liking it (I still like... but not so much).
Now, the problems decided to come...
When I type my password, many times the computer don't leave that "WELCOME" part... others, the screen gets all black with the signature "Windows 7 build 7077" written on the right corner...
I thought it was a problem with my notebook, with the DigitalPersona driver, but I disabled and the problem persists, I uninstalled, and the problem still with me
When I start the computer on SAFE MODE, it goes perfectly, but when I start it on the 'normally' mode, it really kills me...

Anybody can help me?

sorry about my english... many years with any study on it =x

A:Problems with build 7077

I forgot.
There is a problem with my START MENU too...
Here is the screen shot...

http://www.sevenforums.com/general-discussion/8046-problems-build-7077-a.html
Relevancy 67.08%

hello all , my system specs are

ECS Geforce 6100SM-M2 Mainboard
2GB DDR2-667 Ram
Geforce 9500GTS PCI-e video card
Using spare 40GB IDE hdd
CD-RW/DVD-+ RW DL burner
450 Watt PSU
2.5GHZ AMD Athlon 64X2 4800 Dualcore

it seems to be random but its not power settinsg as i tried setting Power management to S1 , S3 and S1&S3

i even enabled HPET i wasnt having a problem with any of teh prebeta, beta and beta 2 builds. i'm using a legitimate copy as well as CD-ket strait off an MSDN account (thank to my friend Xion)

since i cant fully test out build 7077 i'm not going to dualboot it using my main hard drive untill i know how far 7077 is compared to what i last used (7000)

A:Lockup after install of build 7077

Clean install? Upgrade?

http://www.sevenforums.com/installation-setup/7643-lockup-after-install-build-7077-a.html
Relevancy 67.08%

Hi,

In Windows, I only have limited screensavers. Is there a way to activate them all?

P.S. Screenshot attatched of what I mean...

A:No Screensavers in Windows 7 build 7077?

Didn't even look til you mentioned it but I do have one from Avast! :P

http://www.sevenforums.com/customization/7143-no-screensavers-windows-7-build-7077-a.html
Relevancy 67.08%

So, I've been using Build 7000 but went back to Vista x64 because my surround sound didn't work. You think the 7077 build will fix that? It's the onboard 5.1 surround sound (asus board). Also, should I wait for the official RC or just suck it up and deal with the surround sound issue in 7000 or 7077?

Now, what should I do once I install either build? I'm just so bored right now that all the fun is gone after it's installed. Any suggestions on what to do in Windows 7?

A:Should I install Build 7077 or 7000?

Wait for the public release of the RC - release candidate version. It's only a few weeks away.

http://www.sevenforums.com/general-discussion/6988-should-i-install-build-7077-7000-a.html
Relevancy 67.08%

Hi Build - Padlocked Folder 7077 guys Got a question noticed that of my folders in an external HDD had padlocks on them I had performed a clean installation of yesterday and after installation I don't remember seeing them there Suspected that it probably was an ownership thing as mentioned here Hard disk Icons -- Sahred Disks confusing Build 7077 - Padlocked Folder with Padlock Item So I actually changed Build 7077 - Padlocked Folder the ownership of the folders to me for some reason it was set to be owned by the Administrators group but the folder remains padlocked Any idea why this is the case What makes this folders different from the rest in the screenshot above is that I actually added these folders to part of the library and messed around with Homegroup so not sure if that caused the padlocks I've since removed myself from the Homegroup and even attempted to remove them from the library but still can't seem to get rid of the padlock Any one else here facing a similar situation Thanks

A:Build 7077 - Padlocked Folder

Also noticed that my user folder in C:\Users is also padlocked

http://www.sevenforums.com/general-discussion/6929-build-7077-padlocked-folder.html
Relevancy 67.08%

Hi.I have installed my current Se7en approximately 4 month ago and it still hasnt given me a single serious error.Now i'm thinking of reinstalling it to 7600, but i have doubts.So tell me please is it worth of it?Will the system run faster?Are there some new addons?

A:Build 7077 versus 7600

The build you are using will expire. If you purchase a copy, you can use it forever.
No, you will probably not notice a big difference between the RC and RTM versions.

http://www.sevenforums.com/general-discussion/34059-build-7077-versus-7600-a.html
Relevancy 67.08%

Hey guys,

I've used Win7 as my main OS since I installed 7077 but I figure now's time to upgrade to a newer build. I have 7127, 7201 and 7229 all 64 bit editions. Couple questions. Should I download 7137? Is it worth it? Which build of the following three listed above would you choose? My specs are

Dell Studio 1735
4GB Ram
Core 2 Duo T5750 2.00GHz
Intel 965GM Graphics
IDT High Def Audio

Replies are gratefully appreciated!

A:Upgrading from 7077, which build to install?

go with 7229 ... if you need links PM me i got both x32 and x64 and on 4 host sites that are interchangeable links

http://www.sevenforums.com/general-discussion/13130-upgrading-7077-build-install.html
Relevancy 67.08%

My first post on here, have been reading plenty though

I installed build 7077 hoping to be rid of the intel graphics adaptor crash when waking up from a blank screen, build 7068 also suffered with this, and now this new build also does it.

And also my newsleecher no longer runs now, has worked fine on all the other builds.

I get this error "an internal exception occured"

Just hope this does'nt become the RC build, as things are breaking that were fine in builds 7000 and 7057.

A:Windows 7 build 7077 bugs

Wish I could help but on a AMD setup .Dont think this will be the RC build so can only hope things pan out down the line

http://www.sevenforums.com/general-discussion/6729-windows-7-build-7077-bugs.html
Relevancy 67.08%

When upgrading from 7048 to 7077 the installer freezes on the last step (copying files and settings) at 35% every time I've tried it. It suggested removing ATI Catalyst Install Manager and Control Panel, which I did, but it still hangs (although this time at 47%). I have tried several different configurations (with/without CCC and Install Manager, do/don't go online for updates, etc). Every time I have to force restart the computer and it will begin to restore the previous version.

My system specs are as follows:
AMD Phenom X4 9850
SAPPHIRE Radeon HD4830
Kingston HyperX 2x2GB Dual channel RAM
MSI K9A2-VM Motherboard
Western Digital Caviar Blue 500GB + Seagate Barracuda 640GB (installing onto the Seagate)
ASUS DVD drive

Any help is appreciated. Thanks!

A:Build 7077 upgrade freeze

What speed did you burn the DVD at? Because the Install.wmi file is rather large, a fast burn speed may produce read errors that can only be notice upon usage. I suggest 2/4x speed to greatly reduce the risk of write errors.

http://www.sevenforums.com/installation-setup/8360-build-7077-upgrade-freeze.html
Relevancy 66.22%

Have done an upgrade from Vista Ultimate x86 to Win 7 7077 x86. Absolutely no problems, went as smooth as can be.

Increased speed, even though there is only 2GB RAM and 160GB hdd. Vista felt sluggish and slow. It has now grown wings.

A:Upgraded Vista to Windows 7 build 7077 x86

I didn't have much of a problem with Vista's speed with 2GB of RAM. Though I have Home Premium and not Ultimate. Either way each build of 7 that I've used are noticeably better than Vista's speed.

http://www.sevenforums.com/installation-setup/6937-upgraded-vista-windows-7-build-7077-x86.html
Relevancy 66.22%

i've got windows 7 ultimate build 7077 and i am not sure about it

should i install it ( is it a good version?? )

A:i've got windows 7 ultimate build 7077 is it good ?

can some one help me

http://www.sevenforums.com/general-discussion/232874-ive-got-windows-7-ultimate-build-7077-good.html
Relevancy 66.22%

Hi all I've been using seven bit version for quite a while now 7077 Build login stuck @ screen! on my laptop MSI GX PX - amd turion x ati hd MB GB gigs of ram The first installation did the problem mentioned in the title of the topic after i installed Kerio personal firewall - i didn't know what to do so i just reinstalled windows But now it happened again The comp was running for days i turned it off around am then turned it on at am - for the first time i could login and i even see the taskbar and the background but the icons never showed i couldn't click anything on the taskbar either ctrl alt del did nothing so i had to restart it manually The login screen showed up i entered my password but it never made it to the desktop it just got stuck like that the HDD wasn't spinning or anything Build 7077 stuck @ login screen! - restart - in safe mode it boots up normally so i uninstalled a few recently installed Build 7077 stuck @ login screen! programs mkvtoolnix and alike but after restarting it got stuck at Build 7077 stuck @ login screen! the login screen again Now normally i would just reinstall windows but after two months it has too many programs - lot of time to install them again So i thought i'll ask here for help The notebook has XP as it's main OS seven is installed on a virtual harddrive gigs Thank's for any kind of help in advance

A:Build 7077 stuck @ login screen!

Hi there
I can't give you a reason as to the error but this might work.

Try starting Windows in SAFE MODE as you've done but disable Networking and then shutting down. This should clear out any "Stuck" services. Switch off Firewall and uninstall any AV software whilst in SAFE MODE.

Incidentally while you are logged on in save mode see what starts automatically and stop those you don't need -- there are posts around suggesting what you can stop running automatically.

When you try again in "Normal mode" start DISCONNECTED from any network and switch your wireless card off.

Cheers
jimbo

http://www.sevenforums.com/general-discussion/7559-build-7077-stuck-login-screen.html
Relevancy 66.22%

I upgraded (not a clean install) to 7077 today from 7048. I reinstalled the latest Realtek Driver, and my sound is staticy on files played from WMP 12.
I had this issue before on both an upgrade and clean install of 7057, which is why I went back to 7048 among other reasons.

Anybody have a tip, trick, or fix for this? I have tried different sound settings, some are worse than others, but there is static or skipping sound in all media files.

Thanks in advance!

A:Upgraded to Build 7077 - Staticy Sound now

Not a good move to upgrade. These builds are not designed for upgrades and so will not remove the previous files completely.
I recommend you clean install.

http://www.sevenforums.com/sound-audio/7316-upgraded-build-7077-staticy-sound-now.html
Relevancy 66.22%

Whenever I delete the recycle bin, the "full" trash icon never goes back to "empty." If I restart it will come back as empty. But once it fills up again, it does the same thing. Only a restart makes it empty. Tried turning the icon on and off, didn't help.

At first I thought - who cares, RC is around the corner. But now it's become one of those dumb little things that bugs the hell out of me. Any ideas?

thanks

A:broken recycle bin icon - 7077 build

Are you using custom icons on the recycle bin? If so then I have no solution other then using the default one, if you are using the default one then there is a tutorial on how to restore it here, Recycle Bin - Vista Forums

http://www.sevenforums.com/general-discussion/7703-broken-recycle-bin-icon-7077-build.html
Relevancy 65.79%

So, fresh install and build 7077 is super slow. I mean it shouldn't be this slow at least I don't think so.

It always takes 10-15 seconds to open up menus and things and the CPU is constantly at 30-50% load and RAM always at 25% according to the cpu/ram % gadget.

Any ideas?

A:Fresh install, build 7077 is super slow -_-

  
Quote: Originally Posted by Bryce


So, fresh install and build 7077 is super slow. I mean it shouldn't be this slow at least I don't think so.

It always takes 10-15 seconds to open up menus and things and the CPU is constantly at 30-50% load and RAM always at 25% according to the cpu/ram % gadget.

Any ideas?


Perhaps the build you picked up has a malware payload attached to it.

http://www.sevenforums.com/performance-maintenance/7411-fresh-install-build-7077-super-slow-_.html
Relevancy 65.79%

ok as stated for some reason when i did an upgrade from 7077 to 7100, my grub menu's completely gone no more is it there. I know that partition's there it's just for some reason 7 decided to say oh no no more will you have the option to boot to linux probably a plan by M$ to screw over people who jsut want to do an "upgrade" into doing more work but oh well. So what's the plan now? Do i have to do a complete reinstall of ubuntu to get my grub back or is there a simpler fix?

A:7 build 7100 messed up grub upgraded from 7077

Simple fix add it too the bcd, i recommend EasyBCD
or VistaBootPRO - Dual Boot Windows XP or Vista with Windows 7

Easy bcd site is having difficulty's you can download here Download EasyBCD 1.7.2 - An advanced GUI application that makes it easy to modify the Windows Vista bootloader and the entries in it - Softpedia

Edit: EasyBCD site now working.

http://www.sevenforums.com/installation-setup/8135-7-build-7100-messed-up-grub-upgraded-7077-a.html
Relevancy 65.79%

Hi there
I can't believe this
a smallish file gave me message "About 22 Hours remaining" on a simple copy (300 MB file)

It completed of course in a few seconds but how is explorer calculating this value.

Maybe the computer thought I was using Paper Tape instead of Fast LOCAL SATA disks. (Not even across a Network, or external USB drives).

Cheers

jimbo

A:Explorer copy times exaggerated (X-64 build 7077)

Try replicating the issue. Could be a miscalculation, or maybe the calculation was took when the drive(s) were in use.

http://www.sevenforums.com/general-discussion/7565-explorer-copy-times-exaggerated-x-64-build-7077-a.html
Relevancy 65.79%

Well, 7077 build works perfectly and even my surround sound. It was a stupid error on my part . I forgot to select the 5.1 surround sound option in the Control Panel lols.

A:Well Build 7077 works perfectly and my surround sound!!

So, it might have worked in previous builds?

http://www.sevenforums.com/sound-audio/7270-well-build-7077-works-perfectly-my-surround-sound.html
Relevancy 58.91%

Hi all Networking seems to be a real pain to get to work ALL the time with Networking "The Doing - 7077 the Walk" Lambeth build W Latest build x- fixes the problem in Network Discovery where Computers on the network are randomly visible - but now I've got that wretched problem again which was fixed in an earlier release that my LAN card only has limited connectivity again even though windows reports device as working correctly So One step forward and One step backwards quot Doing the Lambeth Walk quot Wireless etc still OK and USB gt LAN adapter which is what I'm using now is OK C'mon microsoft please build 7077 - Networking Doing the "The Lambeth Walk" FIX Networking issues -- this card works in XP and VISTA although VISTA drivers won't work in W Card is Via velocity family gigabit ethernet card Diagnostics can't find any error either What's also bad is that the adapter sort of goes into a loop if you try and do anything like IPCONFIG and you have to Force shutdown Cheers jimbo

A:build 7077 - Networking Doing the "The Lambeth Walk"

Heya Jimbo.... I recently installed a belkin wireless g adapter.... after some hours (random) it will totally drop signal. Its not my modem or router. Even troubleshooting it will not work for me. Eventually end up having to unplug/replug it back in and i'm running again. Could be the adapter, but am interested in feedback about usb adapters and connectivity.

http://www.sevenforums.com/network-sharing/7172-build-7077-networking-doing-lambeth-walk.html
Relevancy 55.04%

I've been stuck on build 11102.rs1_release.160113-1800.
Going to Settings. Update & Security, Check for updates says "your device is up to date".
Checked for updates at least 10 times and always get the same response "Your device is up to date".

I don't want to download an ISO and clean install - I'd like to get the insider updates through
the standard update process.

Any suggestion or solutions?

Thanks

A:build 11102 will not download latest build 14271

Try this - worked for me in a similar situation.

I deleted all folders in the software distribution folder, selected to leave Insider Program from updates menu, rebooted, rejoined Program and then it found the updates. Try just deleting folders first and checking for updates. That works for some but did not for me (it was the leaving and rejoining that seemed to do the trick).

If you try rejoining and leaving, make an image backup of 11102 first, just in case leaving and rejoining should cause it not to activate (especially if you never started from a valid 7/8 licence). Good idea to make the backup anyway in case the upgrade fails (you would then have to go back to 10586 and start afresh)

http://www.tenforums.com/windows-insider/41994-build-11102-will-not-download-latest-build-14271-a.html
Relevancy 46.87%

It was uploaded last night...you can find it in the usual places.

A:Build 7048 x64 download available

Please do not post torrent links on this forum, most people are already aware of the location already and for anyone that doesn't all they have to is Google.

http://www.sevenforums.com/general-discussion/4733-build-7048-x64-download-available.html
Relevancy 46.01%

Quote:
Build 3353 is the latest development snapshot of Opera 10.52 made available for download for early adopters. As it is usually the case with pre-release software, Opera 10.52 Build 3353 is intended for testing purposes only and not for deployment into production environments. Opera Software is currently hard at work on the development of the second minor update to Opera 10.50, released earlier this year. According to the Norwegian browser maker, the build is focused on delivering bug fixes for PowerPC and on KDE 4 integration.


Source -
Opera 10.52 Build 3353 Available for Download - Opera is now at over 100 million users worldwide - Softpedia

A:Opera 10.52 Build 3353 Available for Download.

There's a small compatibility problem in this build. YouTube doesn't work and it keeps saying 'Old Flash? Go upgrade!' So I suggest sticking to the previous build and skip this one.

http://www.sevenforums.com/browsers-mail/78436-opera-10-52-build-3353-available-download.html
Relevancy 46.01%

Title says it all, have not had issues with any previous builds; anyone else run into this or have a fix?

A:Build 10162 download stuck at 0%

Restart the WU service...

http://www.tenforums.com/installation-setup/7760-build-10162-download-stuck-0-a.html
Relevancy 45.58%

I need to enroll first to windows insider ? Because i try to check in software update still not available

http://forums.windowscentral.com/ask-question/445317-how-download-my-lumia-1020-w10-build-10586-a.html
Relevancy 45.15%

When I tried to download the Windows 10 update, the download stopped at 19% and I got th status as error. I was howeer unable to determine the error type. Please help determine the issue and a fix for the same.

Thanks

A:Windows 10 v1511 build 10586 download error

Use one of the following links to install Win 10 Home 10586

Media Creation Tool
https://www.microsoft.com/en-us/soft...load/windows10
Tech Bench
http://www.microsoft.com/en-us/softw...load/techbench

http://www.tenforums.com/windows-updates-activation/31782-windows-10-v1511-build-10586-download-error.html
Relevancy 45.15%

Hi

From the activation of Windows 10, how many hours must elapse before Windows downloads its latest build?

It is possible to speed up this time so as to almost immediately download the latest build?

Thanks

Bye

A:reduce the time to download the latest build of Windows 10

Originally Posted by balubeto


Hi

From the activation of Windows 10, how many hours must elapse before Windows downloads its latest build?

It is possible to speed up this time so as to almost immediately download the latest build?

Thanks

Bye



I believe it's a first come first serve basis via a queue. Therefore, there is no way to speed it up.

http://www.tenforums.com/windows-insider/25591-reduce-time-download-latest-build-windows-10-a.html
Relevancy 45.15%

Hi folks,

As the thread title says, can anyone please tell me where can I download a legitimate, genuine Windows 10 1607 Build 14393.10 .iso file?

Thanks

Art

A:Where can I download Windows 10 1607 Build 14393.10 .iso file?

About as genuine as your going to get. Windows 10 ISO Download

http://www.tenforums.com/installation-setup/61756-where-can-i-download-windows-10-1607-build-14393-10-iso-file.html
Relevancy 45.15%

to:windows 7?‹? ? Blog Archive ? ?œ€?–?windows 7 7070?„?œ??‹??€??ˆ??›??›??…‰?€‘

A:FAKE - Windows 7 Build 7070 download leaked!!!

i Doubt its real..

http://www.sevenforums.com/general-discussion/5271-fake-windows-7-build-7070-download-leaked.html
Relevancy 45.15%

I'm currently trying to download Forza Horizon 3, but the only problem is that I only have ~25GB left on my SSD C: drive. When I go into the system settings and try to change the default save location for Apps, it will let me choose my E: drive, but as soon as I hit apply it just reverts to the C: drive. It let's me change the locations for all of the other options, but as soon as I try to change the locations for Apps it just resets all other save changes I've made.
After a bit of searching for a fix to this I discovered that the Store will ask you where you want to download something if the download is large enough. This is perfect except every time I try to download Forza and choose my E: as the download location, the Store just crashes. No error codes or anything.
Any help would be much appreciated.

A:Cannot Change Default App Download Location, Build 14393.187

Hello, have a look through this- it may help.
Apps Save Location - Change in Windows 10 - Windows 10 Forums

You could try resetting the Store:
App - Reset in Windows 10 - Windows 10 Forums

http://www.tenforums.com/software-apps/64831-cannot-change-default-app-download-location-build-14393-187-a.html
Relevancy 44.72%

Internet Download Manager (IDM) 6.29 Build 15 Registered (32bit + 64bit Patch) (Size: 10.23 MB)
https://www.facebook.com/freesoft888...89731554570539
Link download : My Files)
Connect with Us
==================================================
Website : Full Version Free Software Download
Facebook : https://www.facebook.com/freesoft8888/
Twitter : share software (@share_software) | Twitter
pass unzip :1

http://www.tenforums.com/software-apps/49909-internet-download-manager-idm-6-29-build-15-registered-32bit-64bi.html
Relevancy 44.72%

Speedtest.net by Ookla - My Results


I just built my first pc, but my internet isn't working properly.

I have a fast internet connection, see speed test above. But I can't download any files via browsers. They start to download and immediately go down to 0 kb/s.

My network is AC 17050 Wireless Dual Band - Drivers are installed and updated. I downloaded the driver from their website after installing the driver from the cd and windows says it's up-to-date.

network card is installed into mb correctly,

I have a strong signal with 144mbps

I have tried everything, nothing seems to work. Can't connect pc to router with wire but shouldn't need to as i'm only in the next room

A:Fast Internet but NO download Speed (new build) no ipv6 connectivity

Welcome to the forum. Is your router set to AC not just n type? You wont get ipv6 as its not generally used so you can disable that with ac you should get 3 gig connection are you using 2 or 5 gigs connection?
See if this tells us anything

Please download MINITOOLBOX and run it.
Downloading MiniToolBox

Checkmark following boxes:

Flush DNS
Reset FF proxy Settings
Reset Ie Proxy Settings
Report IE Proxy Settings
Report FF Proxy Settings
List content of Hosts
List IP configuration
List Winsock Entries
List last 10 Event Viewer log
List Installed Programs
List Users, Partitions and Memory size
List Devices (problems only)

Click Go and post the result.

http://www.sevenforums.com/network-sharing/402071-fast-internet-but-no-download-speed-new-build-no-ipv6-connectivity.html
Relevancy 44.29%

Quote Download Opera Beta Build with HTML CSS and SVG Enhancements While with Internet Explorer Microsoft is for the first time placing strong emphasis on modern web SVG Opera Download 11 and with CSS3 HTML5, 1128 Build Enhancement Beta standards support there are players on the browser market that have always made this a priority Case in point Opera A new Beta development snapshot of Opera Download Opera 11 Beta Build 1128 with HTML5, CSS3 and SVG Enhancement is now available for download and early adopters will be able to test a range of enhancements related to technologies such as HTML CSS and SVG Opera Beta Build was offered to testers today and in addition to improved web standards support the release features a range of bug fixes as well as improvements to extensions On the Core rendering side we Download Opera 11 Beta Build 1128 with HTML5, CSS3 and SVG Enhancement have made some nice improvements to HTML forms and have also been working on SVG Performance With regards to HTML forms support we cleaned up our old Webforms implementation from to align with the current HTML spec revealed Ruar degaard from the Opera Desktop team Developers will be able to test a range of new HTML elements with the new Build of Opera Beta Download Opera Beta Build with HTML CSS and SVG Enhancements - Softpedia

A:Download Opera 11 Beta Build 1128 with HTML5, CSS3 and SVG Enhancement

I've been running Opera 11 Beta Build 1128 and its great! As fast as ever with even more features and capabilities!

~Maxx~

http://www.sevenforums.com/browsers-mail/129561-download-opera-11-beta-build-1128.html
Relevancy 43.86%

I have Build 7057, and I will upgrade to 7077 soon. What are some changes I will notice?

A:What's new in 7077?

You won't notice much cosmetic changes. The main changes are in the hardware driver support & stability. There are a lot more device drivers so more hardware is supported/installed without the need to install seperately after installing 7077 (e.g. anything from 7000 to 7057 would not recognise my Wireless LAN, 7068 & 7077 install straight away). Also you'll notice increased performance, startup/shutdown is now faster, Media Center runns a lot more smoothly. Those are just a few i've noticed, if you read through the different posts regarding 7077 you'll get a really good idea of what you're asking.

http://www.sevenforums.com/general-discussion/6885-whats-new-7077-a.html
Relevancy 43.43%

I moved to 7077 from 7068 and noticed a big performance hit. Is anyone experiencing this? Almost reminds me of Vista
Benchmarking with Geekbench and CineBench is bringing the same results but the overall system doesn't feel as snappy:
-Boot is a lot slower.
- First time you start an app is slower, even firefox could take 5 seconds, it used to take about 2 or less b4.
Almost feels like superfetch is not working properly.

A:Performance hit on 7077

Hi Kitron, welcome to the forums

Did you do a clean install or upgrade?

http://www.sevenforums.com/performance-maintenance/7369-performance-hit-7077-a.html
Relevancy 43.43%

i downloaded the x64 7077 and want to install it on 32-bit XP...i opened the ISO file and put everything in the bootable flash drive, and then changed the BIOS to boot from USB...however, that didn't work...the computer is 64-bit capable as it has 4gm ram and AMD Phenom Quad processor...when I opened the folder inside the flash drive and double clicked on setup.exe, it says it can't open the 64-bit

so is there anything i need to do or am i doing something wrong that's preventing me from installing the 64 bit?

thanks

A:Install 7077 x64 on XP 32-bit

  
Quote: Originally Posted by jblazea50


...
so is there anything i need to do or am i doing something wrong that's preventing me from installing the 64 bit?

thanks
...


You need to make the usb bootable first Creating Bootable Vista / Windows 7 USB Flash Drive at Kevin’s Blog and you will need to do a clean install

http://www.sevenforums.com/installation-setup/7477-install-7077-x64-xp-32-bit.html
Relevancy 43.43%

Ok im sorry didnt know i cant say that word well tanx anyway

A:windows7 7077

  
Quote: Originally Posted by rider


do any 1 have a patch crack for it


If you dont want to get banned I would suggest you edit your post, as discussing cracks and the like is against forum rules, just a heads up for you.
http://www.sevenforums.com/general-d...rum-rules.html

http://www.sevenforums.com/installation-setup/10323-windows7-7077-a.html
Relevancy 43.43%

so can i mount from 7077 and just run the install? or does it need fresh install?

A:is upgrade possible from 7077 ?

  
Quote: Originally Posted by ollie007


so can i mount from 7077 and just run the install? or does it need fresh install?


You can, and I just did from 7068 without any trouble...

use 7zip to extract the iso and run setup.

But make sure you have a backup of your data anyway, in case you need to do a fresh install anyway.

http://www.sevenforums.com/general-discussion/7793-upgrade-possible-7077-a.html
Relevancy 43.43%

Hi All After quite some time working with Build I finally decided to upgrade to Build yesterday something I now regret For some reason my computer won't let me run the ATI Catalyst Control software for my HD X video card and in addition to that won't let me install updated drivers To be fair the installation shell for did warn me that there might be can with and 7077 Problems what I do? CCC, a problem but I followed the recommendation provided to rectify it uninstall the offending software to be reinstalled afterward and continued with the upgrade Now I can't get access to my video card controls which has caused me some problems with some games that need video card control rather than game control of their effects making them essentially unplayable went from - fps to - fps at least until I can get back into the control center Now since my computer is primarily a gaming platform this creates a huge problem for me By Problems with 7077 and CCC, what can I do? not having access to the CCC catalyst control center I can't run my favorite games so I need Problems with 7077 and CCC, what can I do? to correct the issue as quickly as possible but I can't simply roll back the change Problems with 7077 and CCC, what can I do? or reinstall build over build at least I don't think I can please correct me if this is wrong so I'm really only left with two options figure out how to make it work correctly under or Uninstall Reformat and reinstall everything a task that would take me over a month in my free time I guess I'm asking then if anyone has had this problem with the CCC and whether or not anyone has managed to get it to work correctly and how If not what options do I have that might allow me to return to build without wiping my program drive I have a seperate drive for programs so I don't have to erase them all however last I heard Win and or Vista doesn't have the ability to scan for installed software and repair of the links and shortcuts without actually reinstalling everything Any help would be appreciated Thanks Greg

A:Problems with 7077 and CCC, what can I do?

I had the same problem with my 4870. You have to remove the drivers for the card that are downloaded during the update of the system that happens when you install, they are 1.1 can't remember the exact name, to remove them got to the control panel where you can see the latest updates made to the system.
Once you've done that you will be able to install the latest catalist drivers.

http://www.sevenforums.com/drivers/7109-problems-7077-ccc-what-can-i-do.html
Relevancy 43.43%

I wasn't sure if it would actually work, but I installed 7077 on my friend's old IBM Thinkpad. He received it from a friend for free, running XP with a ton of unneeded programs bogging it down. It took about six minutes to fully start up. After putting 7 on there, it dropped to about 25 seconds. Most of the drivers weren't in the install, but after connecting it to the Internet through Ethernet, Windows Update found six 'updates' in about half a second...all of them being the missing drivers.

It's not near as fast as 7 could be, but it's running a hell of a lot faster than it was before. It also scored a much higher WEI than I thought it would (graphics aside).

A:7077 on an old IBM Thinkpad

You didn't state the Thinkpad model...is it a T43??

I have Win7 running on my T43 and it's not bad at all. It seems to have the same CPU specs as you have in your Pics but I have 1.5GB of memory. It's pretty cheap to upgrade memory. My T43 seems faster than any Atom netbook I have played with.

I can't wait to vLite (or better yet, 7Lite) the final Win7 version to reduce the unneeded parts of the OS to help make this old laptop a valuable piece of gear for snappy surfing and email.

http://www.sevenforums.com/installation-setup/6905-7077-old-ibm-thinkpad.html
Relevancy 43%

Which build you feel is good (7077 or 7100)?

Not only by the numbers but which is good between these 2....
Even though I installed fresh 7100 but it crashes more than 7077...
Any one else having the same problem....

My explorer crashes more oftenly when I right click on any item or folder...

A:Which is good 7077 or 7100???

well 7077 is irrelevant now. Ive had no major problems with RC.

http://www.sevenforums.com/general-discussion/9739-good-7077-7100-a.html
Relevancy 43%

I dont get the build numbers still despite all the threads I have read.

It would seem that 7106 is newer than 7077, but I read that is not the case?

The 7077 I DL'ed and installed did not perform well at all. I just installed 7106 and it has icons that 7077 did not, and it is blazing fast compared to even 7068 I am running on another drive.

7106 seems newer and faster to me...

A:differences in 7077 and 7106

another strange thing about the 7106 I installed, it does not have the eval water mark in the lower right corner.

The EULA shows RC at the bottom..

http://www.sevenforums.com/general-discussion/7534-differences-7077-7106-a.html
Relevancy 43%

Hey guys I noticed that I get an OS related internet disconnect every few hours for no reason, I THINK it's every time the computer gets out of sleep. I have to reset to fix it.

What may be the problem ?
Many thanks, good forum you have going here.

A:Disconnects with Windows 7 7077

  
Quote: Originally Posted by Silencer23


Hey guys I noticed that I get an OS related internet disconnect every few hours for no reason, I THINK it's every time the computer gets out of sleep. I have to reset to fix it.

What may be the problem ?
Many thanks, good forum you have going here.


Hi Silencer, Welcome to the Forum.

Go to Device Manager, Network adaptors, right click on your adapter, select Properties, Power Management and make sure there is no tick in the top box.

I hope this helps

Pooch

http://www.sevenforums.com/network-sharing/7719-disconnects-windows-7-7077-a.html
Relevancy 43%

You can't restore bookmarks. When you locate the restore file .json, Firefox crashes.

It worked fine in 7068. It looks like MS is going backwards again.

A:7077 Breaks Firefox 3.07 and 3.08

You could import the bookmarks.html instead.

http://www.sevenforums.com/browsers-mail/6755-7077-breaks-firefox-3-07-3-08-a.html
Relevancy 43%

So, I got bored so I'm installing Win7 7077 64bit on a small 200gb partition. How do you all like it so far? You think it would of fixed my surround sound issue I've been having with Win7 (onboard surround sound)?

A:Installing 7077 64-bit on another partition, how is it?

not sure But I did Install 7077 x64 on a 30 gig partition on my Media Center machine (now it dual boots vista and windows 7) and it works like a champ...

http://www.sevenforums.com/general-discussion/7240-installing-7077-64-bit-another-partition-how.html
Relevancy 43%

Hello, I have windows 7 build 7057 32bit installed,
will it make a difference if I updated it to 7077 32bit version, if this is possible in the first place .. ?

thanks!

A:upgrade from 7057 to 7077

Hhhhmmmmm . . . . . . will it make a difference? Yes. Will it be worth the trouble? Maybe. Is it possible? Probably. Now you know less than before.

Bye.

http://www.sevenforums.com/installation-setup/7097-upgrade-7057-7077-a.html
Relevancy 43%

I was just playing with an old r40 with a 40gb hard drive. Ubuntu sees it as /dev/sda but the win 7 installer doesn't see it.

I only have a usb jump drive with 77 with me, but I don't understand why 7 cannot see the hd?

I thought it would be fun to see how 7 runs on this older hardware.

What am I missing.

Thanks

A:IBM R40 7077 cannot see hard drive

A BIOS upgrade allowing it to work better with Vista (and thus 7)....

Does it not see the HD at all? If Ubuntu does then format the Drive as ext3 or NTFS and then try W7 again....

http://www.sevenforums.com/installation-setup/7446-ibm-r40-7077-cannot-see-hard-drive.html
Relevancy 43%

Hey guys,

On my laptop I'm running build 7077 because I don't want to upgrade to 7100 yet but my mom's laptop just got totally infected beyond repair and its time to erase and reformat. I'm wondering if I should just install Windows XP again or install Windows 7 7077 or 7100 x86? She has a dell inspiron 6000 with 1.5 gigs of ram and a Intel Pentium M 1.6ghz but which OS is best?

Thanks

A:Windows 7077 vs 7100 x86?

Go with the latest, RC 7100 32bit.

http://www.sevenforums.com/general-discussion/9434-windows-7077-vs-7100-x86.html
Relevancy 43%

Hello just found this out,

Build 7100 will allow upgrades after all but from build 7077 up only. Without having to edit install routine.

Hope this helps.

A:7100 RC will allow upgrade from 7077 only

ah that blows
i was hoping to upgrade from 7106 ^^ which is another lower build, forget which it is now.

guess its a clean install

http://www.sevenforums.com/general-discussion/7724-7100-rc-will-allow-upgrade-7077-only.html
Relevancy 43%

I have a problem with 7077 that I cant see to find anything on...

The taskbar is very weird. These are the symptoms:

1) When it is on the top, it extends past the normal height and is as "tall" as is "wide" when it is docked on the side. Everything looks right, but the mask extends too far down, making things there (the top of my browser, icons) blurry.

Sometimes this goes away when I move it back and forth to different positions... or sometimes:

2) After moving it around, ill have it on the top of my screen. But there is a taskbar mask on the left side of the screen too! So the bar is at the top and the left inch of my screen is randomly blurry (from the taskbar mask).


Have any idea what can cause this? Im fully stumped.

A:Taskbar Weirdness is 7077

It sounds like a graphics issue, have you got the latest drivers installed?

http://www.sevenforums.com/general-discussion/7665-taskbar-weirdness-7077-a.html
Relevancy 43%

After reading in the forum that 7106 is not worth the d/l, I went ahead and d/l 7077. I am currently running 7068 x64 after having upgraded from each previous build starting from 7000.
For some reason, 7077 wont upgrade from me. It stalls after the first reboot and the last portion of the install, I believe it said "adding devices..." I never see the percentage build up, just the smalls dots going back and forth.
Killed the install and had to use the rollback option.
I did see the sticky above and wonder if it could be my nvidia driver, I have the latest official ver. which is 185.20.
thxs
darco

A:Unable to install 7077 x64

You're not the first - and no one is quite sure if it is just that particular build, that particular release, or something left over from multiple upgrades that is simply getting in the way.

I personally somehow instinctively knew to go with a clean install - and it was worth it. Of course, with my setup, it is a lot easier than, say, on a laptop with a single drive....

http://www.sevenforums.com/installation-setup/7144-unable-install-7077-x64.html
Relevancy 43%

I can't believe this, after the long wait and download, I now get a damn error when trying to burn with PowerIso. Why? Can someone maybe help me?

A:Error burning 7077!

Hi, TheBull,Why are you burning it. Use WINRAR to open the files ,and then install it with the setup.exe file?

http://www.sevenforums.com/general-discussion/6692-error-burning-7077-a.html
Relevancy 43%

i recently did a clean install of 7077 X64 replacing 7068 now for some reason i have two windows 7 listed in boot manger, the first one is the new one the second doesnt even work says boot manager is missing or something along those lines, so i formated and installed again same problem, when starting up after the first start up it takes for every to actually boot it just sits there after the win 7 little colors swirl to make the windows emblem

iv never had this problem before, all my drivers are up to date everything.
anyone have any ideas?

A:Win 7 7077 X64 boot error

Hello TripOG,

If the other Win 7 listed in the Windows Boot Manager screen is just a bad entry, then you can delete after you have booted into the good Windows 7. This tutorial will help show you how to.

http://www.sevenforums.com/tutorials...list-boot.html

Hope this helps,
Shawn

http://www.sevenforums.com/general-discussion/6882-win-7-7077-x64-boot-error.html
Relevancy 43%

I opened Windows Media Center in build 7077 and heard an opening sound I was not familiar with..maybe it was just me ? lol

A:New MC Opening Sound in 7077

What was your previous build? My sound changed from 7048 to 7068, but I never installed 7057....

And it looks quite different upon opening as well....

http://www.sevenforums.com/general-discussion/6768-new-mc-opening-sound-7077-a.html
Relevancy 43%

Anyone else running x64 7077 able to use folder.jpg's properly? Worked fine in 7000 but now all of my folders display multiple thumbnails instead of the folder.jpg. Tried deleting thumbs.db, and duplicated issue in another user account.

A:folder.jpg not working (7077)

*bump*

To clarify about folder.jpg: in previous versions of Windows (XP, Vista, 7 build 7000) when an image file called folder.jpg is placed in a folder, it automatically becomes the default folder picture/thumbnail for that folder (without needing to specify it manually via the Customization screen).

What's happening for me now though is instead of seeing the folder.jpg image as the folder's thumbnail picture, I see the live contents thumbnails instead (the same as if there were no folder.jpg in the folder).

image: http://i171.photobucket.com/albums/u.../Capture-1.jpg

I'm not really looking for a solution at this point, but confirmation from others whether or not the function works.

If someone who has 7077 and can confirm that folder.jpg works properly (ie shows as the folder thumbnail for a folder that contains two or more image files), please chime in as that will help me decide whether I should reinstall or wait out the next build. Thanks in advance.

http://www.sevenforums.com/general-discussion/7017-folder-jpg-not-working-7077-a.html
Relevancy 42.57%

Installed the update (not a clean install). After about 1.5 hours, everything was back up and went into 7MC. Asked if I wanted to use previous settings, I said yes. Get a Playtime install screen, then get error (although playtime was already installed). Went to the next screen and get my PID key request, type it in and says error (I know which keys to use, installed it about 5 times now).

Try several different options as far as uninstalling playtime, try going through 7MC setup, continue to get the error.

My question is, will the PID registration automatically fail if Playtime is not installed. I'm worried that I now have a useless PID as some others have reported. Installing Windows Vista Home Premium from the reinstall disks hoping I can get the PID to work. If not....wife is gonna kill me.

A:Upgrade Problems (7022 -> 7077)

Did you try just skipping it? I have yet to enter the PID while updating to a new version. I've always just clicked 'next' and put it in after the upgrade finished.

http://www.sevenforums.com/installation-setup/6751-upgrade-problems-7022-7077-a.html
Relevancy 42.57%

Hello,

I've had a new problem on my 7077 installation.
Although my pc is running fine, when I try to click on my c drive, it says that it's not accessible.
There is therefore no information shown for it in terms of size, or or free space.
Even when logging in as an administrator, I cannot access it.

EDIT - I cannot even access my DVD drive, although I can access my D partition...

All was working fine until earlier this morning - and no, I haven't visited any 'dubious' sites recently

Any advice would be greatfully received!

Very Best Wishes,
Bob.

A:7077 C drive not accessible problem

Why arent you running RC?

It sounds like you used the upgrade install method from a previous build and I would therefore recommend a clean install to RC.

http://www.sevenforums.com/general-discussion/10991-7077-c-drive-not-accessible-problem.html
Relevancy 42.57%

Hey,
I had an extra laptop hard drive lying around so i wanted to put 7 on it. the bad part is that it has some bad sectors and i dont know how to flag them or anything.... So i was installing 7077 and after the expanding files step it went to reboot.... and i got the "BOOTMGR is missing press Ctrl + Alt + Delete to reboot" error. So i went to the system recovery option in the DVD's main screen and it is asking me to find the hdd's drivers.... help!

A:7077 installation reboot fail

Welcome ChodeOfDoom,
Did you use an external hard drive?
You can use chkdsk (checkdisk) to repair the hard drive.

http://www.sevenforums.com/installation-setup/7480-7077-installation-reboot-fail.html
Relevancy 42.57%

Hello people I m Stephen and boy am I glad to have found this site For the last week or so my laptop has been giving me some grief and is driving me insane It s approx months with Laptop 7077 Problem Advent my old Pentium Ghz RAM and Gb More often than not when I turn it on it won t start up I m often left with a black screen and nothing happens For some reason i ve noticed that if I press the F button a few times it will eventually start but then may Problem with my Advent 7077 Laptop just switch off Other times it will start up then make a bleeping noise a few times then switch off Or yes there s another one it will start up normally work for a few minutes then freeze and switch itself off I was actually in the middle of writing this message last night when one it just cut out on me hence why i m retyping it today I eventually got it to startup and work ok so I ran a virus check through Norton and nothing was found Can anybody give me any advice - other than chucking it out of the window of my rd floor flat Regards Stephen nbsp

A:Problem with my Advent 7077 Laptop

Sounds more like a hardware issue, but just to be safe, check your event viewer (Start>Control Panel>Administrative Tools>Event viewer). Look under the System area for any errors and post the EVENT ID, SOURCE, DESCRIPTION of any errors.
 

http://www.techspot.com/community/topics/problem-with-my-advent-7077-laptop.72749/
Relevancy 42.57%

After a long struggle with my DIgital Cable PID, which I've since solved, I was very excited to upgrade my main HTPC to the latest Win 7 Beta. I was planning to do this with 7068. However, in the mean time 7077 came out. Problem is, 7077 breaks Arcsoft's Total Media Theater - which makes it a deal breaker. Cyberlink is not an option, as we have a fair amount of HD-DVD's. I have no problem rebuilding a 7068 installation (which amounts to re-cloning my working Vista installation, and then upgrading it from there so I can keep my HD content), but I'm wondering if I'll miss anything.

I know that all the hardware I have on this system has been supported since 7000, so I'm really concerned about performance bugs - especially Media Center bugs.

Thanks!

A:Need to go back to 7068 from 7077. Lose anything?

**delete***

http://www.sevenforums.com/general-discussion/6895-need-go-back-7068-7077-lose-anything.html
Relevancy 42.57%

Hi all,

Wonder if I'm doing something really daft but can't seem to install different versions of Windows 7 based on 7077 build e.g. Home Basic, Professional.

I donwloaded 7077 and have installed on a Vmware Workstation 6.5 VM, this allowed me to select the Professional SKU. Also trying to install 7077 on HP laptop and Samsung Netbook both machine are automatically installing Utlimate SKI and dont give me the option of other SKU's on install.

7077 installed via USB hard drive and DVD same issue
7077 ran from XP on Samsung, 7068 on laptop and boot off USB on HP.
I have also formatted drives prior to install.

I must be something daft here!

Anybody else having the same issues?

Many thanks

Dave

A:7077 x86 - Select different SKU Home Basic

Delete /sources/ei.cfg from the ISO and it will give you the option to choose which version, but you can only activate ultimate.

http://www.sevenforums.com/installation-setup/6732-7077-x86-select-different-sku-home-basic.html
Relevancy 42.57%

hello
just installed win 7 7077 and i'm having some trouble,
anyone having trouble with (Adobe Flash Player) draging when playing?
i tryed it and it drags.if i start the show over it plays fine till i
get to the part where i stoped it. seems like it not buffering or something .
any help please
thanks scrooge
ps. here's the link with the shows i was trying to play
Joe the Bartender - Jackie Gleason Video Clips

A:win 7077 x64 and Adobe Flash Player

Yeah I'm having the same problem and I can't determine what's causing it. Flash streaming videos (such as BBC iPlayer) will play smoothly for around 30 seconds and then I will get a constant slight video judder which is most noticable on camera pans. Does this sound like what you are experiencing?

I've tried different GPU drivers (nVidia 8800M GTS) and different versions of the Adobe Flash player, but to no avail. It happens in both IE8 and FF3. Bandwidth of video stream has nothing to do with it either. Didn't experience this in 7068.

Hmmmmm.

http://www.sevenforums.com/network-sharing/6883-win-7077-x64-adobe-flash-player.html
Relevancy 42.57%

Have faster 7077 the RC ? (7100) official much than been 7077 much faster than the official RC (7100) ? using amp now the 7077 much faster than the official RC (7100) ? official RC 7077 much faster than the official RC (7100) ? i e on my tabletpc HP TC tablet PC with GB RAM Core Duo Did a fresh install of few days back but I am noticing it is slower than Same limited set of application installed on both i e MSO K Lotus Notes Firefox Acrobat gtalk thats it Both updated with all drivers etc only from windows update no mfr drivers Same effects etc enabled in both only desktop composition amp visual style amp smooth fonts System is much slower and IE as well as windows explorer take time to display anything and also hang at times Bootup to login screen is much slower than WEI scores for hard disk ram cpu etc are all same as earlier Is someone else having this problem Any experts who could guide me as to how to go about troubleshooting this Any chance that MS would have enabled more debugging reporting options in vs Thanks in advance I had drive imaged the amp am thinking of going back if I don't find a resolution in a day or two

A:7077 much faster than the official RC (7100) ?

Don't know anything about that, but on my computer there was no big difference in computers performance between build 7077 and RC ...
And I must also say that I installed 7077 threw Windows upgrade and the RC as a fresh install.

Anyway, IE worked just fine on both 7's.

http://www.sevenforums.com/general-discussion/8955-7077-much-faster-than-official-rc-7100-a.html
Relevancy 42.14%

In response to a thread made earlier I thought it only right as I'm a big fan of win to quot stick up vista) 7077 and most unlike yet (most responsive stable quot for this build and the flack it received especially in the thread title After reading through 7077 most responsive and stable yet (most unlike vista) the post I can honestly say I have had none of the problems reported and find the build to be the most productive to date with regards to speed and stability Reading through the masses of 7077 most responsive and stable yet (most unlike vista) posts the 7077 most responsive and stable yet (most unlike vista) general gist I get from it all is that are very happy with this build also To quick too often are people ready to shoot down the operating system instead of looking at how they are set up eg overclocks patches hardware software etc etc and one can only assume if nobody else has these problems they must be user generated Windows in my opinion is far more superior in every sense of the word than any other operating system has been at this stage of it's life There can be no comparison Sorry jimbo I just cant agree with your thread title

A:7077 most responsive and stable yet (most unlike vista)

I totally agree, Windows 7 is by far the best way forward. It's been too long since we had such a stable & fluid OS and if RTM (when finally out) is anything like build 7077 then I say bring it on. With the added support for various hardware & the sheer increase in performance (even with my low spec lappy LOL) it's just the bees knees.

http://www.sevenforums.com/general-discussion/6951-7077-most-responsive-stable-yet-most-unlike-vista.html
Relevancy 42.14%

Hi all
I wanted the Office 2007 addon - save documents in pdf and xml formats.
Downloaded from Ms office site.

Was prompted for WGA -- it didn't actually do anything as WGA isn't yet functional for Windows 7 -- I'm running build 7077 X-64. It just tghen passed me straight to the download.

Installed the add on.

Then I got please activate Windows -- you have 27 days (?) left to activate windows.

It activated OK but I'd ALREADY activated windows -- and where did the 27 days come from -- normally it's 30 days.

However under some circumstances I've seen (different) Windows builds - not necessarily W7 only) saying "To continue using Windows it must be activated within 3 days".

To the more mathematically challenged 30 -3 = 27 -- co-incidence perhaps.

After re-activation - no further probs -- but found it strange behaviour -- no extra hardware added etc.

Cheers
jimbo

A:WGA (Windows Genuine Advantage) is Broken (7077)

I've not had the issue with WGA on any build of Windows 7 & i have installed Office 2007 fine. I'll try downloading the file your on about and see anyway.

Also, the 3 days remaining usually occurs when you choose to 'Activate Windows Automatically once online' during installation.

http://www.sevenforums.com/windows-updates-activation/7345-wga-windows-genuine-advantage-broken-7077-a.html
Relevancy 42.14%

Option A ISO on bootable USB and formatted hard disk.

Option B UNPACKED iso on second hard disk and overwrite older version by running setup.exe?


Option C thru Z methods I haven't heard of yet


(Tried search of tutorials without success - would be good to have tutorial on Fast Install Clean/Upgrade )

A:Fastest 7077 Clean Install Method?

Only method ive tried is method D: burning iso to dvd and rebooting.

http://www.sevenforums.com/installation-setup/6849-fastest-7077-clean-install-method.html
Relevancy 41.71%

Is anyone else having problems installing Windows Live components on these builds? Anytime I try to do an install, I get a "can't access the internet" message.

If I install via a standalone installer, the program (MSN Live Messenger) works fine.

A:Windows Live install and Win 7 7057/7068/7077 x64

nope, however i only install messenger from whole live pack...

http://www.sevenforums.com/software/6837-windows-live-install-win-7-7057-7068-7077-x64.html
Relevancy 40.85%

I am living in India and slow download speed and I want to install Insider preview on my 2 desktop and 2 laptop

so I need direct link to download Windows Windows 10 Insider Preview build 14376

can anyone here give me link to download it directly on MS website or on 3rd party website
I already have genuine MS 10 PRO licenses no piracy brothers

thanks in advanced

A:direct link to download Windows Windows 10 Insider Preview build 14376

You can save the bandwidth and let only one of your computers to download the upgrade through Windows Update, then make your own ISO and upgrade the other computers with it.

ISO making instructions: ESD to ISO - Create Bootable ISO from Windows 10 ESD File - Windows 10 Forums

http://www.tenforums.com/windows-insider/54781-direct-link-download-windows-windows-10-insider-preview-build-14376-a.html
Relevancy 39.99%
A:if i upgrade lumia 640 xl via upgrade advisor app which build are download?

Hi, 10586.494 will be downloaded (although it will probably come in 2 parts, .007 first and then .494)

http://forums.windowscentral.com/ask-question/434030-if-i-upgrade-lumia-640-xl-via-upgrade-advisor-app-build-download.html
Relevancy 37.41%

On Windows 7 32 bit build 7077 the HD LED "ticks" once per second. I googled and found related issues with CDROM drives and AutoPlay. The fix for XP was to set AutoPlay to 0 in the registry for the CDROM device.

I have AutoPlay set to 0 running Windows 7. If I disable the CDROM device in Windows 7 the once per second "tick" of the LED goes away. If I enable the CDROM device it comes back.

If I boot to XP Pro SP2 there's no ticking. I suspect a Windows 7 driver issue. Anyone hear of this and a solution?

edit: when I say "solution" I mean other than pull the wire to the LED, put black electrical tape over the LED etc.. I mean a real solution.

A:7077 causes HD LED "tick" if TSSTcorp burner enabled

Why are you on such an old build? :S

http://www.sevenforums.com/drivers/43520-7077-causes-hd-led-tick-if-tsstcorp-burner-enabled.html
Relevancy 36.98%

Not sure if anyone's reported this yet, but I did a clean install of 7077 on my backup computer and anytime I start an application download and select "run" from the download menu, it downloads the program but will not start it, I have to go back and save the file, and run the .exe from there.

Anyone else run into this and found a fix?

A:Can't install programs from "run" DL option in 7077

That's a strange 1. I've not had that issue with any build. Sorry, can't help you out there, hopefully someone can though

http://www.sevenforums.com/general-discussion/6880-cant-install-programs-run-dl-option-7077-a.html
Relevancy 36.55%

Can I install Icon Packs designed for Build 7600 to Build 7601?

An Icon Pack was saying install on to 7600 only and after I checked my regedit, I learned that I have 7601 (Probably SP1, I don't know).

Would I have any problems if I install the icon pack?

Thanks.

A:Can I install Icon Packs designed for Build 7600 on to Build 7601?

You can normally install icons anywhere you like, on any machine or system which uses them, they are merely small graphics of various types. Unless the "Icon-pack" is using software to install something else, ( in which case be careful what it does), you can install it anywhere.

Some "Icon-packs" make extensive changes to system files, are dependent on the system to which they are installed, and best avoided.

Regards....Mike Connor

http://www.sevenforums.com/customization/155091-can-i-install-icon-packs-designed-build-7600-build-7601-a.html
Relevancy 36.55%

My win pro build hasn't received the November update build while my other win home versions have I know I'm not the only one having this problem but here's my two cents On my xw I upgraded from win pro to win pro as soon as was available some months ago I still receive other windows updates I downloaded 1511 the 10240 November pro build build received 10 win update hasn't the most recent iso from the media creation tool but I don't have an option to mount it from the right click menu Both sfc and dism have no issues I would burn it do a disk but I've read other users say its just reinstalled build instead I was using another random win pro computer at work today and noticed it hasn't received the November update yet either Anyone else with win pro that did get the update Maybe this issue has more to it like when I upgraded to pro I had an issue with onedrive I don't really use it so I only disabled it from win 10 pro build 10240 hasn't received the November update build 1511 startup in the task manager but it as a service disappeared except for registry entries and program files and win 10 pro build 10240 hasn't received the November update build 1511 I haven't found a way to reinstall it yet I know I could do a clean install of windows but that's not my style I move from pc to pc over the years using disk images win 10 pro build 10240 hasn't received the November update build 1511 This onedrive issue is the only problem I've come across that I haven't figured out without a clean install I mean I wiped onedrive from my system completely registry keys and all but attempts to reinstall fall short error corrupted file During the attempted installation it places all its registry items and files including the file it says is corrupt Copy those files that are working on another computer no dice sfc and dism no issues I'm getting off track I was hoping the November update would fix it but now that's an issue too Maybe Microsoft delayed the November update on win pro Thanks in advance

A:win 10 pro build 10240 hasn't received the November update build 1511

RE : I downloaded the most recent iso from the media creation tool but I don't have an option to mount it from the right click menu.

Did you burn the iso to a bootable media, then insert the media to the computer ?
If that was what you did, then you would NOT see the Mount option.
Instead, you would see the Setup option. Use that to start the installation.

http://www.tenforums.com/windows-updates-activation/36509-win-10-pro-build-10240-hasnt-received-november-update-build-1511-a.html
Relevancy 36.55%

My current system was upgraded to windows 7 32bit from vista 32bit (I bought the windows 7 home premium upgrade disc when it was first released). I am going to build a complete new system. Can I install windows 7 64bit from the same windows 7 disc? Or do I have to buy a new windows 7 disc? Is there a way around buying a whole new disc?
 

A:Solved: New computer build work with old build's Windows 7 Disc?

It won't activate and you will end up in Safe Mode permanently. One machne = one license. You need to buy another full version. But you can do it if you don't use 7 on the old machine. You will just have to activate by phone and explain. Then if you go online with both, one will deactivate and go to Safe Mode.
 

https://forums.techguy.org/threads/solved-new-computer-build-work-with-old-builds-windows-7-disc.1005746/
Relevancy 36.55%

P50-A09M running Windows 10 64b

Trying to update my Toshiba Video Play to version V5.3.50.2 from V5.3.27.102-A

All I get is Version of source build is not target build.

Tried both ways dnloaded the Window 10 update and via the Toshiba Service Store, the Service Store gives you the wrong info to delete the old one, totally wrong as you have no Video Player to update, had to use a system restore to get it back, the build in backup version V5.3.27.102-A
will not install comes up to delete it all the time ??

Ive seem many post regarding this error; Version of source build is not target build but No answers.

https://forum.toshiba.eu/showthread.php?91864-Satellite-P50-A09M-Version-of-source-build-is-not-target-build
Relevancy 36.55%

Everytime I try and updated or patch a problem on my computer I get this message (Version of Source build is not target build) and I'm unable to download repairs. What can I do I have tried a few things but same message.

https://forum.toshiba.eu/showthread.php?90827-Updates-issue-version-of-source-build-is-not-target-build
Relevancy 36.55%

Yesterday i updated my phone to wat supposed to be anniversary update .i was surprised that my windows build had vecome an insider preview build which in the past i downgraded my phone to version 8.1 then updated to windows 10 original to get away from the insider version..my question is why ot came back and how to prevent it from coming back in the future

A:why my windows mobile 10 build has transformed to an insider preview build

Originally Posted by Windows Central Question Yesterday i updated my phone to wat supposed to be anniversary update .i was surprised that my windows build had vecome an insider preview build which in the past i downgraded my phone to version 8.1 then updated to windows 10 original to get away from the insider version..my question is why ot came back and how to prevent it from coming back in the future Go to settings - Info and check build version.
Annyversary Update is nothing else than Redstone that became official and replacing old Threshold, read the news ;)

http://forums.windowscentral.com/ask-question/436478-why-my-windows-mobile-10-build-has-transformed-insider-preview-build.html
Relevancy 36.55%

So recently after the November build release I woke the next morning to find that my computer underwent a rather major update After which it seemed my home network was thrown out of newest build. to previous back rolling after find build Cant wack I immediately rolled reverted recovered to previous build But now everything is out of wack Most of the time I have to restart my computer just so it'll communicate with my printer to start printing And restarting the computer is twice as long if it restarts at all Most of the time It gets stuck in the quot restart quot progress animates the rotating circles and I have to press the restart button on the computer tower with great regret and dread Transferring files from one windows device to another is a hit or miss I'm pissed I'm not literate when it comes to networking and was super happy how everything was But now not only is my wifi home network out of wack but my computer itself is wonky I figure I might as well reinstall the newest build in hopes that it'll at least fix a fe of the problems But anytime I check for updates the newest build no longer shows up Can someone please help

A:Cant find newest build after rolling back to previous build.

Windows 10 ISO Download - Windows 10 Forums

Mount the ISO file, run setup.exe from the fake DVD drive created by mounting the ISO file.

http://www.tenforums.com/windows-updates-activation/39036-cant-find-newest-build-after-rolling-back-previous-build.html
Relevancy 36.55%

Hi everyone After not recieving the AU from Microsoft I took a look at winver I noticed that my PC has never received or installed an update since the original Windows build Version or build I began to investigated and noticed that Cumulative Update KB keeps trying 10 (build 10240) update to original Windows build from Unable to install however Windows Update always fails to install this update giving me this error quot There were problems installing some updates but we'll try again later If you keep seeing this and Unable to update from Windows 10 original build (build 10240) want to search the web or contact support for information this may help quot No error code is provided I took a look at setuperr log within the Windows BT folder and this is the only error present Error SP CSetupPlatform ResurrectNewSystem Cannot resurrect new system Win Exception C Windows BT Sources NewSystem dat The system cannot find the file specified x thiscall UnBCL FileStream FileStream const class UnBCL String enum UnBCL FileMode enum UnBCL FileAccess enum UnBCL FileShare unsigned long gle x I would really appreciate if anyone could help me out with this issue as i'd like to move up to the AU - Please let me know if you need any more info Thanks

http://www.tenforums.com/windows-updates-activation/63725-unable-update-windows-10-original-build-build-10240-a.html
Relevancy 36.12%

no matter what i try no matter what i do disable in bios or w/e it still freezes and i cant be the only one w/ this issue. can Any one help?

my specs are in my profile yes their being done as clean installs

---edit---
by odd chance i found out why i was freezing. it was my Netgear WG311T wifi extremeG card .

took it out and i dont freeze up anymore

A:Still freezing up with 7077 32bit/7100 32bit

I ended up installing an old netgear witreless pci card the ma311 card. the drivers for it only went up to xp and the computer didnot recognize the card at first. the wg311t was recognised by the windows 7 and it installed then my computer froze i think that the drivers that the os has in it cause a conflict so i sugges going to the netgear website and getting the xp drivers it my be a solution for the problem.

http://www.sevenforums.com/installation-setup/7877-still-freezing-up-7077-32bit-7100-32bit.html
Relevancy 36.12%

I am trying to install Windows Build from Windows Build I Install Windows 10586 10 Build Build 10240 From have just received the Windows Update Assistant popup telling me I'm not running the latest version of Windows I have it downloaded but it will not install The computer check Install Windows 10 Build 10586 From Build 10240 said my computer is good to go Asus AllInOne Model ET I've tried several times and each time it reaches the computer restarts and then it goes into quot reinstalling your previous version quot and I'm back to Build I know there are other people with the same problem but no solution One website said to delete quot Windows old folder as that may be a problem using Disk Cleanup but it doesn't show up on my Install Windows 10 Build 10586 From Build 10240 computer under quot Clean Install Windows 10 Build 10586 From Build 10240 up system files Previous Windows installations There is a quot Windows old quot folder on my C drive but it is full of empty folders I'm not sure if I should just go ahead and delete it There is also a new folder called Windows Upgrade with files in it Hope someone can help thank you

A:Install Windows 10 Build 10586 From Build 10240

Do you have the Razer Synapse software installed? That seems to have been what's caused it for me. Unfortunately I seem no longer to be able to trigger the update, darn it, as Windows now feels it has updated and all's fine (it hasn't).
uninstall the Razer software and try again. Hopefully it hasn't messed you up completely.

http://forums.windowscentral.com/windows-10/433934-install-windows-10-build-10586-build-10240-a.html
Relevancy 36.12%

If I get an .iso of Windows 10 RTM (14393) , I can install over the Preview Build (14931) I'm using without losing my personal files, Win32 programs and applications?

A:Install RTM Build (14393) over Preview Build (14931)

Yes. Mount the ISO file as virtual DVD by double clicking it and launch the Setup.exe to start upgrade.

http://www.tenforums.com/installation-setup/65102-install-rtm-build-14393-over-preview-build-14931-a.html