Windows Support Forum

the logon process was unable to display security and logon options whe

Q: the logon process was unable to display security and logon options whe

I have a Gateway MX6920 that had Windows XP preinstalled on it, I formatted and installed Windows 7. it only has the basic Windows 7 programs on it +Firefox, Google Chrome, TeamViewer, & an Anti-virus, but I have an ongoing issue where the computer completely freezes. the mouse doesn't work, no programs open, and I cannot bring up the task manager. if I press ctrl+alt+del it will still be frozen for about 5 more minutes, then give me the following message the "logon process was unable to display security and logon options when ctrl+alt+delete was pressed" and then just keeps being frozen until I cold boot shut down.

I scanned for viruses, ran sfc /scannow, with several programs but they all report clean

I am at a loss and this is a daily issue

Googling this error message brings up limited but unresolved issues

Relevancy 100%
Preferred Solution: the logon process was unable to display security and logon options whe

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: the logon process was unable to display security and logon options whe

according to the following link:

Failure to display security and shut down options. The logon process - Microsoft Community

it looks like the windows winsock needs to be reset. Hopefully doing that will solve the issue: to do that; do the following:

open a elevated command prompt(click start, programs, accessories, then right click on command prompt and select run as administrator) type netsh winsock reset hopefully that will help. If not that then in the same command prompt; type the following: netsh winsock reset

try one of the above commands and see if that helps to resolve the issue.
netsh winsock reset

http://www.sevenforums.com/general-discussion/323233-logon-process-unable-display-security-logon-options-whe.html
Relevancy 88.35%

logon process has failed to create the security options dialog
I was running a malwarebytes scan in the backround and all of the sudden ie locked up. I tried to open task manager and got a black screen. Then I got an error that said- logon process has failed to create the security options dialog. Then I got out of the black and there malware bytes was running fine again. what does all this mean- does t mean malware bytes was scanning the file for so long and was trying to verify it but malwarebytes couldent get the security dialog fo rit so it moved on? Please help

or maybe worse maybe something was trying to do some unauthorized thing to my ???????

A:logon process has failed to create the security options dialog

can someone PLEASE help me

http://www.vistax64.com/system-security/236360-logon-process-has-failed-create-security-options-dialog.html
Relevancy 88.35%

I was running a malwarebytes scan in the backround and all of the sudden ie locked up. I tried to open task manager and got a black screen. Then I got an error message that said- logon process has failed to create the security options dialog. Then I got out of the black and there malware bytes was running fine again. what does all this mean- does t mean malware bytes was scanning the file for so long and was trying to verify it but malwarebytes couldent get the security dialog fo rit so it moved on? Please help

or maybe worse maybe something was trying to do some unauthorized thing to my computer???????

Relevancy 88.35%

My daughters computer is a Dell security process Logon the has options dialog create failed to desktop running Vista Home The processor is Logon process has failed to create the security options dialog a GB the computer has gb ram amp gb hard drive She received the following error when she turned it on yesterday quot Log on process has failed to create the security options dialog X - Failure - Security Options quot The above error basically kills the computer Unable to run programs access the internet etc I m able to boot into the safe mode with networking without issue I m unable to run a virus scan as the Charter Comm Security suite will not work in safe mode I ve tried the following - Ran a Anti-malware scan using Malwarebytes - I ran a spy-ware scan using - SUPERAntiSpyware - I did a system restore using a date three days ago - rebooted - no difference - I ran error checking on the hard drive with automatically fix file system errors - rebooted - no difference - turned off the service Super fetch - an recommendation from a Microsoft website - rebooted - no difference - I have run the Dell utilities to check the RAM amp Hard drive - no errors found I m looking for help in resolving the problem Bob nbsp

Relevancy 88.35%

My computer is a Dell Hybrid desktop running Vista Home premium Computer becomes unresponsive at startup in normal mode Unable to run programs access internet even opening files causes windows explorer to not respond computer is unusable outside of safe-mode I m able to boot into the safe mode with networking without issue Following error pops up after a few minutes quot Log on process has failed to create the security options dialog X - Failure - Security Options quot I ve tried - updated avast antivirus full boot time scan and malwarebytes - Logon failed options security dialog process has the to create found nothing - spy-ware scan with spybot search and destroy - found nothing - system Logon process has failed to create the security options dialog restore using a date three days ago - no difference - scanned hard Logon process has failed to create the security options dialog drive for disk errors and fixed them - no difference - turned off Super fetch - no difference - sfc scannow in command prompt and also did startup repair through the dell diagnostics at bootup- no difference also tried advanced systemcare and ran deep scan for registry errors fixed - no difference I tried to get a log with hijackthis but it won t install in safe mode and normal mode won t allow me to install it or do anything else I m looking for help in resolving the problem A UPDATE spoolsv exe is causing the problem and I have not figured out how to fix it When i end the spoolsv exe process everything starts up fine but the printer doesn t work I tried uninstalling all of my printers rebooted then installed only the newest drivers and software for my current dell v printer rebooted spoolsv exe still causes problems during startup I did manage to install hijackthis here s the log Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows Vista SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C Windows Explorer EXE C Windows system taskeng exe C Program Files AVAST Software Avast AvastUI exe C Program Files Dell Support Center bin sprtcmd exe C Program Files DELL DellDock DellDock exe C Program Files Dell V dldwMsdMon exe C Program Files Windows Media Player wmpnscfg exe C Program Files Dell V dldwmon exe C Users Adele AppData Local Google Chrome Application chrome exe C Users Adele AppData Local Google Chrome Application chrome exe C Users Adele AppData Local Google Chrome Application chrome exe C Users Adele AppData Local Google Chrome Application chrome exe C Users Adele AppData Local Google Chrome Application chrome exe C Users Adele AppData Local Google Chrome Application chrome exe C Windows system rundll exe C Users Adele AppData Local Google Chrome Application chrome exe C Users Adele AppData Local Google Google Talk Plugin googletalkplugin exe C Users Adele AppData Local Google Chrome Application chrome exe C Users Adele AppData Local Google Chrome Application chrome exe C Windows system SearchFilterHost exe C Program Files Trend Micro HiJackThis HiJackThis exe R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKLM Software Microsoft Internet Explorer Main Local Page R - HKCU Software Microsoft Internet Explorer Main Window Title Internet Explorer optimized for Bing and MSN R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - C Program Files Common ... Read more

https://forums.techguy.org/threads/logon-process-has-failed-to-create-the-security-options-dialog.996753/
Relevancy 88.35%

Failure-Security Options
I have been having this problem for a while Computer Freezes and I cant do anything

I don't know how it fix this

I also Cannot turn on Windows Defender windows freezes and a error 0x800106ba A problem caused this program's service to stop Restart and search help and support did this no solutions
can't figure out what happen there

Would Like some proffesional advice
Thanks all help is greatly appreciated
Linda

A:Logon process has failed to created the Security options Dialog

Start with a few of the free scans from here: Free Online AntiMalware Resources
If it shows that you're infected, please post over in the Security Forums.
If not infected, post back for some more diagnostics to be run.

http://www.vistax64.com/crashes-debugging/296897-logon-process-has-failed-created-security-options-dialog.html
Relevancy 88.35%

My computer Toshiba A series with Vista Home Premium has been moving reallly s l o w for the past few days It will not respond and will periodically freeze sometimes to the point where only a hard close will get it to respond If I leave it alone eventually I will get a dialog box with the above message Ctrl Alt Delete yields another message quot Failure - Security Options quot Since google is my friend I have tried all the possible suggestions relating to this error message with no success I have deleted and reinstalled my Norton Premier Edition completely removed MS Essential ran CHDSK and started a clean boot with selective start up items The problem still exist At this point I don t know if I have a virus although Norton is not picking up anything or if this is some sort of hard drive issue If anyone is familiar with this error message and can offer any solutions I will be very appreciative

A:Logon process has failed to create security options dialog

Welcome aboard Read through this thread: http://www.vistaforums.com/error-message-login-process-has-failed-create-security-options-dialog-t3287.htmlI posted just a link because it looks like different solutions worked for different people.

http://www.bleepingcomputer.com/forums/t/419006/logon-process-has-failed-to-create-security-options-dialog/
Relevancy 85.56%

Hey guys,

I have a Windows Vista Home Premium 32 bit and I get this error after it has been sitting idle. It does not go to standby but screen shuts off. Only way to return computer to original state is to hard boot it and restart it.

Anyone have any advice?

Thanks,

Its a HP DV6767ca Laptop
 

A:Logon Process has failed to create the security options dialog." Error Message

Looks like there are several things that can cause it

http://www.google.com/search?q=Logon Process has failed to create the security options dialog&num=20

Looks like many of them ran a System File Check
http://www.bleepingcomputer.com/forums/topic43051.html
To see what SFC did after it is finished:

The SFC log is contained inside the cbs.log file located at:

C:\Windows\Logs\CBS\CBS.log
Since the cbs.log may be huge (it's used by other programs besides the SFC),
you might want to do this:

To create relevant SFC-only information gleaned from the cbs.log, and put it
in a small file called sfcdetails.txt, right-click Command Prompt (using the
shortcut in Start Menu\Programs\Accessories) and choose Run as
Administrator. By default, the prompt starts in C:\Users\(Your Name).
Type:

cd desktop

Press Enter on your keyboard. Then Copy and Paste this at the prompt:

findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >sfcdetails.txt

Press Enter. Sfcdetails.txt should then appear on your Desktop. Now you can view what SFC actually did.
 

https://forums.techguy.org/threads/logon-process-has-failed-to-create-the-security-options-dialog-error-message.864827/
Relevancy 85.25%

I've done some reading about these two issues , and I have tried doing a disk check, and a clean boot. Both failed, however I CAN boot into safe mode, even with networking. Any suggestions on how to go about troubleshooting this issue? I can access all of my Windows files via Debian if I really need to get into it.

A:Windows Stopped Responding+The logon process was unable to display...

Hello and welcome xtro take a look at this Troubleshooting Steps for Windows 7

You can access a sfc /scannow from safe mode as you will see.

http://www.sevenforums.com/bsod-help-support/275671-windows-stopped-responding-logon-process-unable-display.html
Relevancy 104.06%

We are getting dozens of these Alerts generated at our Exchange Server What is causing it and more importantly what procedural steps do we take to prevent the alerts from generating ------------------------------------------------------------------------------------------------------------------------------ Details Windows Event Alert was recorded Time Date Time Windows Event Time Date Time Windows Event Log Security Windows Event Source Microsoft-Windows-Security-Auditing Windows Event ID Windows Event Severity Failure Audit Windows Event Logon Process: ID w3wp; 4625; Events Failed Advapi] [Event Procss Type 8; Name: Logon Message An account failed Failed Logon Events [Event ID 4625; Logon Type 8; Procss Name: w3wp; Process: Advapi] to log on Subject Security ID S- - - Account Name EXCHANGE SERVER Account Domain DOMAIN Logon ID x e Logon Type Account For Which Logon Failed Security ID S- - - Account Name Username Account Domain DOMAIN Failure Information Failure Reason Unknown user name or bad password Status xc d Sub Status xc a Process Information Caller Process ID xd c Caller Process Name C Windows System inetsrv w wp exe Network Information Workstation Name EXCHANGE SERVER Source Network Address IP ADDRESS Source Port Port Detailed Authentication Information Logon Process Advapi Authentication Package Negotiate Transited Services - Package Name NTLM only - Key Length This event is generated when a logon request fails It is generated on the computer where access was attempted The Subject fields indicate the account on the local system which requested the logon This is most commonly a service such as the Server service or a local process such as Winlogon exe or Services exe The Logon Type field indicates the kind of logon that was requested The most common types are interactive and network The Process Information fields indicate which account and process on the system requested the logon The Network Information fields indicate where a remote logon request originated Workstation name is not always available and may be left blank in some cases The authentication information fields provide detailed information about this specific logon request - Transited services indicate which intermediate services have participated in this logon request - Package name indicates which sub-protocol was used among the NTLM protocols - Key length indicates the length of the generated session key This will be if no session key was requested ------------------------------------------------------------------------------------------------------------------------------ Any help would be much appreciated nbsp

A:Failed Logon Events [Event ID 4625; Logon Type 8; Procss Name: w3wp; Process: Advapi]

Account For Which Logon Failed:
Security ID: S-1-0-0
Account Name: [[Username]]
Account Domain: [[DOMAIN]]

Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc000006a

Process Information:
Caller Process ID: 0xd5c
Caller Process Name: C:\Windows\System32\inetsrv\w3wp.exe

Network Information:
Workstation Name: [[EXCHANGE_SERVER]]
Source Network Address: [[IP_ADDRESS]]
Source Port: PortClick to expand...

I would start there. Where is the source of the attempt? Inside or outside? If inside, it should be easy to determine who the source is (assuming that this is an internal server). If outside, you may have someone trying to hack an account.
 

http://www.pcreview.co.uk/threads/failed-logon-events-event-id-4625-logon-type-8-procss-name-w3wp-process-advapi.4045827/
Relevancy 101.05%

Hi On my notebook Dell Inspiron XP Home SP I am unable to change the logon options When I click on user accounts gt gt user accounts gt gt change the way users log on or off I get an error message saying that a recently installed program has stopped the ability to change this and it offers the file dwlGina dll saying that can help me find the program The thing is I have no idea what program I ve done searches and the only resemblence of a program I could come up with on the internet was Replacekeys but I don t have that program Can anyone suggest another way As it stands when the computer turns on I need to enter my password well just change to options logon Unable click ok since I don t have a password and then it turns on If I click on start where my name is there is no image And the shut Unable to change logon options down menu is changed as well I am at a total loss I d do a restore however it s been like this for a while and I just happened to see a tutorial on how to change the options so I thought I could fix it and this is what I encountered Thanks for your help Erin nbsp

A:Unable to change logon options

I would try this -

1) go to Start/run and type in regedit and hit enter.
2) navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
3) Look for the following ans see if its a key like - Winlogon
Value = GinaDLL REG_SZ

If the Gina DLL value is present and is anything other than Msgina.dll, this probably means that a third-party product has changed this value. I would back this registry key up and then change it to what it shows above.

You also could try a system restore if you have that available and this just started happening.
 

https://forums.techguy.org/threads/unable-to-change-logon-options.451592/
Relevancy 98.47%

Hi everyone I am so glad to have found this forum and to see that others in the past with similar problems have had them resolved looking forward to nutting this one out ISSUE The computer is a win XP with RAID that freezes the mouse and the keyboard if a mouse or keyboard button is touched at the logon screen The mouse works fine until a button is pressed screen freeze with KB logon, Unable at RAID, XP to & mouse logon Win you can even click on a user but are unable Unable to logon, Win XP with RAID, KB & mouse freeze at logon screen to Unable to logon, Win XP with RAID, KB & mouse freeze at logon screen enter a password due to the keyboard and mouse freezing at Unable to logon, Win XP with RAID, KB & mouse freeze at logon screen this moment NOTE originally happened with a USB keyboard and USB mouse using PS keyboard and mouse BACKGROUND I am writing about my fathers old computer which suddenly started freezing up at the logon screen after he wasted weeks trying to get it to work he decided that it was a hardware issue and bought himself a new computer Since then I have proved that there was no hardware error by putting an extra HDD in and installing Ubuntu LTS Everything functions fine under Ubuntu and the files are able to be accessed on the RAID DESIRED OUTCOME While i can access and copy files as needed from the RAID i would like to return access to the win XP install and let my father use it again STEPS TAKEN SO FAR I first attempted to run Live rescue CD's but they could not find the RAID drive - Bit Defender Rescue CD Saw the ubuntu drive no RAID - Kaspersky Rescue Disk Didn't see any HDD's So I ran the following AV programs from ubuntu LTS - Bit Defender NO THREATS FOUND - ClamAV THREATS detected all quarantined Documents and Settings USER Local Settings Temp -RR-Market Bulletin-LJR pdf Heuristics Encrypted PDF Program Files BitDefender Bitdefender updatesrv exe Win Trojan Zbot- Program Files BitDefender Bitdefender AntiSpam as fun slf HTML Phishing Card- Program Files BitDefender Bitdefender installer psstatemgr dll Win Trojan Zbot- Program Files BitDefender Bitdefender bdselfpr sys Win Trojan Jorik- Program Files Common Files Adobe ARM ReaderUpdater exe Win Worm Agent- Program Files Common Files BitDefender BitDefender Firewall bdftdif sys Win Trojan Carberp- Program Files Common Files BitDefender SetupInformation DEE- D - -A -CA E BBC C bdselfpr sys Win Trojan Jorik- Program Files Common Files BitDefender SetupInformation DEE- D - -A -CA E BBC C gzflt sys Win Trojan Delf- Program Files Mozilla Firefox Mozilla Firefox crashreporter exe Win Trojan Shell- Program Files Internet Explorer Connection Wizard icwtutor exe Win Worm Runouce- Program Files QuickTime QTSystem QuickTimeUpdateHelper exe Win Worm Chir- Program Files BitDefender Bitdefender gamemodeal dll Win Trojan Zbot- Program Files Microsoft Office Office excelcnv exe W Virut Gen D- RECYCLER NPROTECT EXE Win Worm Chir- WINDOWS ServicePackFiles i extrac exe Win Worm Chir- WINDOWS NtServicePackUninstall mspaint exe Win Trojan Resur- WINDOWS Installer b d msp W Virut Gen D- WINXP PRO CD I ICWTUTOR EX Win Worm Runouce- WINXP PRO CD I MSPAINT EX Win Trojan Resur- Program Files BitDefender Bitdefender avckf sys Win Trojan Cossta- Program Files BitDefender Bitdefender proxymgrui dll Win Trojan Zbot- Program Files BitDefender Bitdefender AntiSpam as es slf HTML Phishing Bank- Program Files BitDefender Bitdefender AntiSpam as fr slf HTML Phishing Bank- Program Files BitDefender Bitdefender AntiSpam as fun slf HTML Phishing Card- Program Files BitDefender Bitdefender AntiSpam as es slf HTML Phishing Bank- Program Files BitDefender Bitdefender AntiSpam as fr slf HTML Phishing Bank- I then attempted to logon to win XP with the same result of KB amp mouse freezing at logon screen after a button press I then ran - ESET NOD Antivirus NO THREATS FOUND

A:Unable to logon, Win XP with RAID, KB & mouse freeze at logon screen

So you are able to run the machine  using PS2 keyboard and mouse.
 
 
Step 1: 
 
Download and install LogonFix
 
Click the Highlighted button.
 

 
When prompted select yes.
Allow the program to reboot your machine as well when prompted.
 
 
Step 2:
 
Download drivecleanup.zip to your desktop.
CLICK HERE to determine whether you're running 32-bit or 64-bit for Windows.
Once the determination has been made open either the 32-bit or 64-bit folder.
Right Click the .exe on the inside of the folder and run as admin.
A command prompt window will open telling you what has been removed upon completion.
Note: All usb devices must be removed from your machine during this step, except your keyboard and mouse of course. 
 
Step 3:
 
 

 
Download TFC by OldTimer to your desktop.
Close any open windows
Double click the TFC icon to run the program. (Vista/7/8 Users, Right Click and select Run as Admin)
TFC will close all open programs itself in order to run
Click the Start button to begin the process
Allow TFC to run uninterrupted
Once its finished it should automatically reboot your machine, if it doesn't, manually reboot to ensure a complete clean.

http://www.bleepingcomputer.com/forums/t/541306/unable-to-logon-win-xp-with-raid-kb-mouse-freeze-at-logon-screen/
Relevancy 96.75%

Hi, just got a new laptop with Windows Vista Basic pre-installed. Trying to get it going, having installed various things from the Google package (toolbar, Skype, Acrobat reader, Spyware Doctor). Also AVG antivirus (free download). And Microsoft Office (but the problem was before that anyway). Its spec is Acer Aspire 3694WLMi - Cel 440 512MB 80GB hard drive with wireless network card. However it takes ages to boot, during which we get the message "Logon process failed to create the security option dialog", and then nothing will run. What's going on - something to do with the Vista settings? Or something we installed? And what can we do about it? Thanks in advance for any tips. Jo.
 

https://forums.techguy.org/threads/logon-process-failed-to-create-the-security-option-dialog.612155/
Relevancy 96.75%

i have hp laptop.but due to unknown reason such error occurs.my laptop get hang ,and due to this i have to power off.but after startup my laptop takes too much time and may again get hang error appear of logon proces......................so i done recovery of c drive but no sollution.i uninstalled the CA antivirus but again same errorrrrrrrr
 

A:logon process has failed to create a security option dialog box

pl reply i need solution urgently
 

https://forums.techguy.org/threads/logon-process-has-failed-to-create-a-security-option-dialog-box.872050/
Relevancy 92.45%

When i boot up the system hangs at the blue 'Windows xp' screen, the 'Windows is starting' is missing and it goes no further, the logon screen does not appear so i can't get in. I have recovery console on and i can get into the drive by booting in from another drive/operating system. how can i rectify the problem?
This happens in safe mode as well, can anyone suggest how to recover from this.

Steve
 

A:XP Does not get to Welcome logon screen, unable to logon

if you have a windows xp cdrom the easy way around this is with a repair install of windows xp http://www.fujitsu-siemens.co.uk/rl/servicesupport/techsupport/software/windows/xp/Repair.htm
 

https://forums.techguy.org/threads/xp-does-not-get-to-welcome-logon-screen-unable-to-logon.369294/
Relevancy 86.86%

Hello all. I've tried several things to no avail. I need some extra help.A friends PC is getting this error: STOP: c000021a [fatal system error]Windows Logon Process system process terminated unexpectedly with a status of 0x00000080' (0x00000000 0x00000000).The System has been shut down.What occurred before this error popped up:1. Upgraded dvd43 software, booted, and this error came up.I have tried multiple things.1. Ran the bootfix2. Tried the Recovery Console with their diagnostics3. Tried to get to Safe Mode and it will not load, goes back to this message.4. Tried to overlay the XP image (refresh it), no avail, back to the same message.I haven't found anything on the web that can help me so far. Looking to take the next step and ask for help.

A:Windows Logon Process system process terminated unexpectedly with a status of 0x00000080

0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATEDThis occurs when Windows switches into kernel mode and a user-mode subsystem, such as Winlogon or the Client Server Runtime Subsystem (CSRSS), is compromised. Security can no longer be guaranteed. Because Win XP can?t run without Winlogon or CSRSS, this is one of the few situations where the failure of a user-mode service can cause the system to stop responding. This Stop message also can occur as a result of malware infestation or when the computer is restarted after a system administrator has modified permissions so that the SYSTEM account no longer has adequate permissions to access system files and folders.I've never gotten this particular error...but if I did, i would treat it as a malware situation until proven otherwise.Louis

http://www.bleepingcomputer.com/forums/t/262599/windows-logon-process-system-process-terminated-unexpectedly-with-a-status-of-0x00000080/
Relevancy 82.99%

Hi

Not sure if this is the right forum to post this but hopefully someone can help!

I have created various user accounts on my PC for friends and family. How do I change it so once I switch my PC on it comes up with the various user names and you can then access yours from there? (if that makes sense!) I know I have seen this on other PCs but I dont know how to do it!

Thanks a million
msiz
 

A:Logon Options

In XP go to:

Start | Control Panel | User Accounts

then:

"Change the way users log on & off"

then:

"Use the Welcome Screen"
 

https://forums.techguy.org/threads/logon-options.339609/
Relevancy 82.56%

Everytime I start my computer I am getting a "c000021a The Windows Logon Process terminated unexpectedly with a status of 0xc0000018 The system has been shutdown" I had been having spyware problems and just installed Norton Internet Protection 2008, which cleaned up the problems, but then this started. Any help for a computer novice here would be great. I run Windows XP on a Dell.
 

Relevancy 82.13%

Hello, I am trying to change the logon / off options on windows XP pro, for fast user switching and the windows welcome screen. BUT the message i get is :
Client services for netware has disabled the welcome screen and fast user switching. To restore these features , you must uninstall client services for netware.

Please how do i do this ?
Thanks.

A:Set Logon and Logoff Options

Hi, this link may help http://support.microsoft.com/kb/315347 and how to uninstall http://forums.novell.com/novell-product-su...xp-machine.html

http://www.bleepingcomputer.com/forums/t/271677/set-logon-and-logoff-options/
Relevancy 81.7%

Hey guys,

I was on YouTube earlier today when I noticed that the videos were already completed buferring, but the videos were lagging; and Firefox was performing kind of slow. I decided to re-start my computer. After re-starting the computer the logon process took extremely long, then an error message appeared:

Logon process has failed to create the security options dialog.

Failure - Security Options

I waited for the desktop to appear, then re-started again. But the perofrmance of the logon is still extremely slow. Any suggestions?

A:Logon Process Failure

hey

Try rebootaing into safe mode, and then reboot normally.

do you have another user on the machine that you can log on as?

http://www.vistax64.com/general-discussion/248629-logon-process-failure.html
Relevancy 81.7%

Dear Sir,

I would like to view the logon process when I switch on XP system,
i.e is when applying settings, applying personal settings etc. , to see what files are being processed.

Thanks
anand

A:view logon process in XP

I am sure, (not completely positive) but I believe to access this sort of logon screen on an XP system, you must be a member of a domain, not a workgroup.

http://www.techsupportforum.com/forums/f10/view-logon-process-in-xp-573146.html
Relevancy 81.7%

Recently, my laptop has been giving me errors saying that Interactive logon process initialization has failed. Please consult the
event log for more details. It takes me a few tries before it goes away.

A:Logon Process Failed

Is this about the same computer you already started several threads about ? Please see my remark here : http://www.techsupportforum.com/micr...ol_caller.html

I'm giving you a warning for multiple posting, we can't help you efficiently if different advices are given in different parts of the forum. If those questions are about another computer tell us about it and I'll revert the warning.


Quote:




MULTIPLE POSTING

This refers to posting the same question or same replies in multiple areas of the site (also called flooding). Please only post only once. If you feel you have posted in the wrong forum, contact a Moderator or Manager, who will move the post for you. This also includes the creation of multiple new threads on the same or similar topics and sending PM's continuously to one or more Staff members.

http://www.techsupportforum.com/forums/f217/logon-process-failed-303040.html
Relevancy 81.27%

Please help! I am trying to logon to my computer and am getting The User Profile Service failed the logon message for both my Lucy and Lucy Administrator profiles. I have looked on here to find a solution and have tried to do a system restore but it tells me that there are no settings to restore to ?? Most other messages just dont make sense as Im not great at dealing with computers when they go wrong! I would be really grateful if anyone knows how I can sort this out. The only thing I can do is log into Safe Mode and I have no idea where to go from here!
Thanks

A:Vista logon issue - The User Profile Service failed the logon ???

Hi Lucy

The following tutorial will give you instructions on how to fix this - The User Profile Service failed the logon. User profile cannot be loaded.

http://www.vistax64.com/general-discussion/277998-vista-logon-issue-user-profile-service-failed-logon.html
Relevancy 81.27%

I accidently screwed up the administrator account and once, i tried to install a software and it came "You need a administrator password to proceed"so i typed it then it came the error"this user has not been granted the requested logon type at this computer i tried a lot but its still not working and i cant install anythin..so please help me
 

A:Logon failure:this user has not been granted the requested logon type at this compute

https://forums.techguy.org/threads/logon-failure-this-user-has-not-been-granted-the-requested-logon-type-at-this-compute.1084708/
Relevancy 81.27%

Windows 2003 server local policy keeps loosing the users that I set so that it can be browsed accross the workgroup. I can browse the server from the other pcs in the workgroup only for a few minutes until the policy looses the users all by itself. I cannot find anything that can explain what's going on. BTW - I can browse the other computers from the server with no problem. The local policy on the other computers don't change themselves. TY
 

A:logon failure: the user has -been granted the requested logon type at this computer

Logon failure: the user has not been granted the requested logon type at this computer

If you see this message the following should be done on the computer containing the shared files:

Download the following and install it

Windows Server 2003 Resource Kit Tools
http://go.microsoft.com/fwlink/?LinkId=4544

after installation is complete, click on: Start, All Programs, Windows Resource Kit Tools, Command Shell

Then enter the following commands. (Attention: they are case sensitive.)

net user guest /active:yes
ntrights +r SeNetworkLogonRight -u Guest
ntrights -r SeDenyNetworkLogonRight -u Guest

The first command enables network access for Guest, the two subsequent ones change two different policies to allow network access for Guest.
 

https://forums.techguy.org/threads/logon-failure-the-user-has-been-granted-the-requested-logon-type-at-this-computer.693444/
Relevancy 81.27%

Hi, I have this on login attempt

The User Profile Service failed the logon. User profile cannot be loaded.
It then logs off and directs me back to same screen.

As I stupidly only have one account I have no access to play with any windows options!!!

Please he lp
Just turned on other PC on home network and was able to access the shared folders on problem pc.

Is there any way to correct without a clean install?

Thank You

SOLVED....... Big apologies to all staff at TSG.. I didn't search enough posts.

But I found this and followed exactly. Don't know if it was for Vista, but workedlike a charm on Win 7 x64 Ultimate.

http://forums.techguy.org/windows-vista/787436-solved-user-profile-service-has.html
Thanks
 

https://forums.techguy.org/threads/solved-the-user-profile-service-failed-the-logon-but-only-one-logon-account.927771/
Relevancy 81.27%

Hello all This is my first ever post usually with a bit of searching I can find the answers to most computer related issues I have but no matter how hard I look I cannot find the answer I need granted not has Logon requested the logon this compute user failure: type been the at to solve this rather annoying problem So here is the low down I have my desktop PC running Windows Ultimate I also have a cheap old Asus netbook running Windows XP home edition SP not much on it so it runs ok I am trying to share files between them so my Mrs can access the music on my PC So Logon failure: the user has not been granted the requested logon type at this compute far I have been able to access the shared files folder from my netbook on my PC I can also detect the PC under the Workgroup tab of 'My Network Places' on the netbook However whenever I double click on the 'Richyv-pc' icon in the Workgroup folder is comes up with an error message that states quot Richyv-pc is not accessible You might not have perrmission to use this network resource Contract the administrator of this server to find out if you have access permissions Logon failure the user has not been granted the requested logon type at this computer quot I have granted full share access to all the wanted files from my PC with access to 'Everyone' with read write control I have tried many different things from many different forums but none have fixed this problem Im sure Im missing something obvious but I just cant see it My PC is part of a homegroup because of my work laptop that I bring home from time to time but I dont think this is causing the problem Any helpful suggestions would be greatly appreciated Many thanks Richy V

A:Logon failure: the user has not been granted the requested logon type at this compute

Hi and welcome to TSF see the steps here and check that you have followed them Share Files and Printers between Windows 7 and XP - How-To Geek

http://www.techsupportforum.com/forums/f10/logon-failure-the-user-has-not-been-granted-the-requested-logon-type-at-this-compute-645121.html
Relevancy 81.27%

I've tried every fix that I can find on the internet to get around this issue. I've identified the problem to be the local policy on the 2003 server that allows incoming access erases the accounts I add after a few minutes, therefore I can no longer access the server from another computer in the workgroup. I can always access any computer from the server. I need help....please. TY
 

https://forums.techguy.org/threads/strange1-logon-failure-the-user-has-been-granted-the-requested-logon-type-at-this.693734/
Relevancy 81.27%

Logfile of HijackThis v Scan saved at PM on Platform Windows XP SP WinNT MSIE Internet Explorer v Running processes C WINDOWS System smss exeC WINDOWS system winlogon exeC WINDOWS system services exeC WINDOWS system lsass exeC WINDOWS system svchost exeC WINDOWS System svchost exeC Program Files Intel Wireless Bin EvtEng exeC Program Files Intel Wireless Bin S EvMon exeC Program Files Intel System The Logon With Ad-aware System (fatal Crashes Window Process Te... Screen Message: Process A Into Blue Stop:c000021a Error) Wireless Bin WLKeeper exeC WINDOWS system spoolsv exeC Program Files Common Files LightScribe LSSrvc exeC Program Files Dell QuickSet NICCONFIGSVC exeC Program Files Intel Wireless Bin RegSrvc exeC WINDOWS system svchost exeC WINDOWS Explorer EXEC WINDOWS system wscntfy exeC WINDOWS system hkcmd exeC WINDOWS system igfxpers exeC Program Files Intel Wireless bin ZCfgSvc exeC Program Files Intel Wireless Bin Ad-aware Crashes Into A Blue Screen With Message: Stop:c000021a (fatal System Error) The Window Logon Process System Process Te... ifrmewrk exeC WINDOWS stsystra exeC Program Files Synaptics SynTP SynTPEnh exeC Program Files Dell Media Experience PCMService exeC Program Files CyberLink PowerDVD DVDLauncher exeC WINDOWS system dla tfswctrl exeC WINDOWS system Ad-aware Crashes Into A Blue Screen With Message: Stop:c000021a (fatal System Error) The Window Logon Process System Process Te... igfxsrvc exeC Program Files Adobe Acrobat Distillr Acrotray exeC WINDOWS system aa c ff exeC PROGRA PRINTV pvmodule exeC Program Files Common Files F E- C- - - Update exeC WINDOWS system ctfmon exeC Program Files EarthLink TotalAccess TaskPanl exeC PROGRA Intel Wireless Bin Dot XCfg exeC WINDOWS system wuauclt exec dell E-center gtb exeC Downloads HijackThis exeR - HKCU Software Microsoft Internet Explorer Main Default Page URL http start earthlink netR - HKCU Software Microsoft Internet Explorer Main Default Search URL http www earthlink net partner more msie ton search htmlR - HKCU Software Microsoft Internet Explorer Main Search Bar http start earthlink net AL SearchR - HKCU Software Microsoft Internet Explorer Main Search Page http www earthlink net partner more msie ton search htmlR - HKCU Software Microsoft Internet Explorer Main Start Page http www google caR - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http www google caR - HKLM Software Microsoft Internet Explorer Search SearchAssistant http start earthlink net AL SearchR - HKLM Software Microsoft Internet Explorer Search Default Page URL www google com ig dell hl en amp client dell-usuk amp channel usR - HKCU Software Microsoft Internet Connection Wizard ShellNext http us mcafee com root campaign asp cid R - URLSearchHook SrchHook Class - F B - C- -A B -D BD DCBB - C Program Files EarthLink TotalAccess ElnIE dllR - URLSearchHook no name - CFBFAE - A - D - CB- C FD - no file O - BHO no name - -C B - F -AB -F BF D FD DD - C WINDOWS system pmnlj dllO - BHO AcroIEHlprObj Class - E F-C D - D -B D- B D BE B - C Program Files Adobe Acrobat ActiveX AcroIEHelper dllO - BHO IeCatch Class - F -AA - B - F D- A B E EF - C PROGRA FlashGet jccatch dllO - BHO EarthLink Popup Blocker - B F E - F - a-B -B E C EDF - C Program Files EarthLink TotalAccess PnEL dllO - BHO no name - - F - D - - D F - C PROGRA SPYBOT SDHelper dllO - BHO DriveLetterAccess - CA D E- - CF- E - - C WINDOWS system dla tfswshx dllO - BHO AcroIEToolbarHelper Class - AE CD -E - f- - EE - C Program Files Adobe Acrobat Acrobat AcroIEFavClient dllO - BHO PrintViewBHO Class - D E C - CE- - A - FD C - C PROGRA PRINTV PRINTH DLLO - Toolbar FlashGet Bar - E E AB-F - D - D - BA E - C PROGRA FlashGet fgieba... Read more

A:Ad-aware Crashes Into A Blue Screen With Message: Stop:c000021a (fatal System Error) The Window Logon Process System Process Te...

Hi george_527,

We're studying your log right now and will be back to you a.s.a.p.

Thanks for your patience.

http://www.bleepingcomputer.com/forums/t/66296/ad-aware-crashes-into-a-blue-screen-with-message-stopc000021a-fatal-system-error-the-window-logon-process-system-process-terminated-unexpectedly/
Relevancy 80.84%

I have two win xp sp2 pcs. Both of them are in the same workgroup. I can ping each one from the other. I can access the shared folders of one pc from the other. But the reverse is not true. I cannot access shared folders of the other machine.
I am attaching the error message here.

A:logon failure: the user has not been granted the requested logon type

After going through a similar thread I installed windows resource toolkit and entered the command mentioned in that thread. But now I am getting Access Is Denied instead of logon failure: the user has not been granted the requested logon type.

http://www.techsupportforum.com/forums/f10/logon-failure-the-user-has-not-been-granted-the-requested-logon-type-237417.html
Relevancy 80.84%

Hie guys Iwas looking on some postas with regard to this topic and tried to implement the suggestions I followed the suggestion below To resolve this problem on the remote computer select Administrative Tools gt Local Security Settings gt Local Policies gt User Rights Assignment right-click on Access this computer from the network gt Properties gt Add Users or Groups add everyone or any users you want to be able to access the computer from the network This fixed the problem on the interim and at The Logon Failure: the user logon requested granted been not type has t I could access my file shares and printers However when I restart the machine or even log off nad log on again the prblem resurfaces and all the user accounts Iand groups i wolud have added to Administrative Tools gt Local Security Settings gt Local Policies gt User Rights Assignment right-click on Access this computer from the network gt will be removed and the field empty hence I suspect spam the disallow remote access Logon Failure: The user has not been granted the requested logon type at t by editing these entries Any ideas on how Logon Failure: The user has not been granted the requested logon type at t this can be resolved would be appreciated

http://www.techsupportforum.com/forums/f10/logon-failure-the-user-has-not-been-granted-the-requested-logon-type-at-t-441971.html
Relevancy 80.84%

:( I dont know how to fix this blue screen error. The last thing i did was install outpost firewall. Then i rebooted and it went to the welcome screen. And something detected Winspy2.0 and i removed it. Then i got the BLUE screen message and i cant go into safe mode or "last known good config"
Please! help. Thanks.

A:stop c000021a {fatal system error} the windows logon process system process terminate

does this help your issue with the system.

http://support.microsoft.com/?kbid=316503&sd=RMVP

http://www.techsupportforum.com/forums/f10/stop-c000021a-fatal-system-error-the-windows-logon-process-system-process-terminate-72163.html
Relevancy 80.41%

Hi I'm having big issues with my Windows OS I recently tried to clear up some space on my C drive windows with disk cleaner and a program that checks what's taking up so much space on my windows folder it was around gb I had a malware attack a little while back that I finally thought I cleared up and fixed but apparantely there are - Failure Logon Initialiazation Help!! Process Please still some issues going on I ran an SFC Logon Process Initialiazation Failure - Please Help!! Scan Now or ChkDsk can't remember which one but after I restarted my computer I got the quot Logon Process Initialization Failure quot error and I couldn't log in I tried Safe Mode still same error I booted off Windows startup repair ran the startup repair option and it could not detect Logon Process Initialiazation Failure - Please Help!! a problem Then I ran Command Prompt from the Windows startup and entered Chkdsk C r and once it almost finishes it says that it couldn't transfer log files Then I tried Sfc Logon Process Initialiazation Failure - Please Help!! scannow and it says another repair is already pending THEN I ran the dism exe image cleanup revert pending blah blah and it said it was unable to access the image There is clearly something going wrong with my log file or something is missing or corrupted I can't do system restore either because I disabled it and never set a restore point at this point I'm all out of options I really need the best computer wiz to help me out here because I have so much important software installed that it would be horrible if I had to do a reformat I want to try everything I can Please somebody help me out

A:Logon Process Initialiazation Failure - Please Help!!

Do you remember what virus you had ?

http://www.sevenforums.com/general-discussion/298584-logon-process-initialiazation-failure-please-help.html
Relevancy 80.41%

Hi Windows probably Home edition says quot Logon Process Initiation Failure quot and quot Interactive logon process initiation has failed Please consult the event log for more details quot I installed Logon Initation Failure Process Avast Antivirus just prior to this After the install it said it blocked Malware and deleted it I guess it deleted something important as the message came up after restarting the system I tried System Recovery using a Windows disc but it said there isn t room on the drive This message is a result of a virus because the drive wasn t full in actuality Tried the bootsector exe I think in the Windows Recovery Command Prompt to rebuild member etc but no luck I also deleted partitions and in hopes of increasing space of partition for System Recovery to work Did this delete all my data on those partitions I can reinstall easily enough and that would probably be the preferred method given that posting logs takes time I d like to use something like Linux Ubuntu Bart etc to get Logon Process Initation Failure my data and then reinstall What is the easiest thing to download and use for data recovery Thanks

http://www.bleepingcomputer.com/forums/t/411745/logon-process-initation-failure/
Relevancy 80.41%

So a while back I was watching a video and a pop up appeared and I it asked me if I wanted to download something and I clicked no. But that same pop up continuously appeared and I accidentally clicked yes. The computer froze so I forced shut down and whrn I tried to turn it on again, the BSOD appeared. It turned off a second time and then when it restared, the safe mode window appeared and I ran that and it tried to fix the problem but now whenever I try to get on, there is a black screen with a window that says" interactive logon process has failed. Please consult the event log" I click ok and I just appears again. There is no getting past it and I am unable to do anything on my. Computer. Please help

A:Interactive logon process has failed...

Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

http://www.sevenforums.com/bsod-help-support/231663-interactive-logon-process-has-failed.html
Relevancy 80.41%

Hello!

My Latitude D620 laptop cannot start up because it has a fatal system error with a blue screen before it can. The error message follows.

STOP: c000021a {Fatal System Error}
The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000135 (0x00000000 0x00000000).
The system has been shut down.

Before this error, the laptop would take a while to logon after I woke it up from standby. I had no clue if there was a virus on it or not to be honest.

I would like to be able to recover my laptop to a working state. I do not have Windows Recovery Console on the laptop if I recall correctly.

Thank you very much in advance!

A:Logon Process Fatal Error

Hello ,does it boot to windows and what is the operating system?

http://www.bleepingcomputer.com/forums/t/449016/logon-process-fatal-error/
Relevancy 80.41%

I just recently restored my pc to a bacckup point that i have used on at least three occasions. After the restore was complete i pressed the restart button and upon restarting i get hit with a "Logon Process Initialization Failure" box. It comes up in safemode as well and will not let me proceed to anything else. Any Ideas? I'm using a Lenovo ideapad s10-2. thanks for any help.

http://www.bleepingcomputer.com/forums/t/405591/logon-process-initialization-failure/
Relevancy 80.41%

Hi -
When I try to boot my HP Compaq laptop I get this message in a dialog box.

This computer has been overheating and either powers down itself or we power it down.

Here's what is in the dialog box:
Logon Process Initialization Failure
Interactive logon process initialization has failed
Please consult the event log for more details.
Then an OK button.

I have booted into command mode and run SFC /SCANNOW, but that made things worse, since after running that the only way out of the dialog is to power down.

I found a Windows Hotfix here: http://support.microsoft.com/kb/2615701

I got the hotfix to the computer, but I cannot run it. I put it in a subdirectory of Downloads and ran it, but all that did was unzip it. When I click on the unzipped file I get the message "Cannot run in safe mode".

Any help will be appreciated.

Doug ​
 

A:Logon Process Initialization Failure

Hi -
I've got this computer working now (found that I could go back to a recent restore point).

What's up with the overheating? Is this mean end-of-life for the computer or is it a simple repair? Anyone know? Sometimes it runs all day and sometimes it lasts an hour.

Thanks.
Doug
 

https://forums.techguy.org/threads/logon-process-initialization-failure.1068744/
Relevancy 80.41%

I am attempting to restore a friends working laptop specs are as follows HP Pavilion dv Notebook PC Laptop CPU Intel Core Due T GHz G Ram Vista unknown if sp are installed When the pc boots normal safe mode command prompt it loads past the green bar loading screen then screen goes black and I receive error box that states logon process initialization failure view log Unable to view log due to the inability to login through various attempts I have process failure logon initialization tried F to repair windows run startup recovery repaired errors still unable to login From same section opened command prompt and performed chkdsk c r results kb in bad sectors kb occupied by the log files Failed to transfew logged messages to the event log with status F boot in safe mood safe mood with networking safe mode command prompt Last known good configuration all receive error box I am curious to know is there a fix for this or is the fix to attempt to logon process initialization failure reinstall or go to logon process initialization failure a restore point I found another forum that gave instructions to use a Live Ubuntu cd to save the data Idk what kind or how much data is on the laptop or if there are any restore points set at all Any and all help and advice is much appreciated thanks

A:logon process initialization failure

FWIW:
  http://www.gfisk.com/windows-vista-logon-screen-of-death/
  http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/logon-process-initialization-failure/f98c6986-4ce5-44fd-a9ef-99b9c1fa2e36
 
Louis

http://www.bleepingcomputer.com/forums/t/485523/logon-process-initialization-failure/
Relevancy 80.41%

Error message when Windows loads ? ?Logon Process Initialization Failure?
? Interactive logon process initialization has failed
? Please consult the event log for more details

does anyone know how I can fix this? or atleast get my files saved to a disk or something i can burn data discs if nesscary i just really need to fix this...i am running windows vista home premium 32 bit....i have the disc to install vista still.

A:Logon Process Initialization Failure

Hi,

Have you tried to boot in safemode? (repeatedly tap the "F8" key while booting)

You should see a list of boot options...you can choose standard "Safe Mode" , "Safe Mode with Networking" - loads network processes

Then when in Safe Mode, go to the control panel and then in classic view find and double click Administrative tools --> then open the event viewer to view the log of what is happening.

JeKyL

http://www.techsupportforum.com/forums/f217/logon-process-initialization-failure-385379.html
Relevancy 80.41%

Hi
have the above message on a windows 7 laptop. I have tried system restore but that fails to load down to a corrupted registry. have also tried replacing the log on files from a windows 7 cd but nothing has worked. I have come across a hotfix from Microsoft for this issue, but the only way I can think this would work is if it can be run from a command prompt as I cant log in to windows. After searching I came across this quote to input the complete path
For example, if the Windows6.0-KB934307-x86.msu file is in the D:\934307 folder, type the following command at a command prompt to install the update package:
wusa.exe d:\934307\Windows6.0-KB934307-x86.msu. All I get is an installation error.
 

https://forums.techguy.org/threads/logon-process-initialisation-failure.1163218/
Relevancy 80.41%

Hello bad stuff happened I think it was some electricity malfunction anyway after unexpected reboot my Windows does not load the desktop with error screen says Quote Logon Process Initialization Failure Interactive logon process initialization has failed Please consult the event log for more details So it doesn't proceed to login screen safe mode doesn't work with the same issue system restore tool do restore it without Initialiazation Process Failure Logon troubles but this makes no changes and I have the same login failure I can boot only to System Recovery Options screen Well I've read this thread it describes my problem pretty accurately the only solution provided was check and replace logonui exe but I actually have this file in windows System so it won't help either SFC SCANNOW works without any troubles Then I've tried to ask Microsoft they have https support microsoft com en-us kb hotfix When I try to run unpacked msu with wusa exe it goes with an error quot x Class not registered quot so I can't tell whether it works or not Is there any kind of solution besides clean install

http://www.sevenforums.com/general-discussion/390566-logon-process-initialiazation-failure.html
Relevancy 80.41%

This isn't exactly a BSOD issue but I wasn't sure where to post it. My laptop is giving me this error:

"Logon Process Initialization Failure"

when it starts. There is a hotfix available for this, in the form of an MSU, but I don't know how to apply it since I can't sign into the computer. I am able to get to the command prompt in recovery but after that I'm not sure what I should be doing.

http://www.sevenforums.com/bsod-help-support/396508-logon-process-initialization-failure.html
Relevancy 80.41%

Hello , i have this problems with my laptop

1

https://www.youtube.com/watch?v=Rr9I...fH4WNVtn7lK2NQ

2

https://www.youtube.com/watch?v=GauU...fH4WNVtn7lK2NQ


Help Me plz ...

A:Logon Process initialization failure

Hi and welcome to TSF try a start up repair from your install disc steps on how to are here How to Repair a Windows 7 System with an Installation Disc
Read first and if you need to read again until you have the steps set in your mind.

http://www.techsupportforum.com/forums/f217/logon-process-initialization-failure-882729.html
Relevancy 80.41%

Hi all Need some help with this please Have had a look on various sites for solutions to this but none seem to work for my particular problem One of them suggested it Logon Failure Initialization Process may be something to do with SidebySide and to look in the application event logs for a corrupt manifest file This is the entry Activation context generation failed for C Windows system LogonUI exe Dependent Assembly Microsoft Windows Common-Controls language amp x a processorArchitecture amp x a publicKeyToken b ccf df type win version could not be found Please use sxstrace exe for detailed diagnosis Logon Process Initialization Failure How do I Logon Process Initialization Failure use sxstrace exe I've tried system restore and chkdsk r I've also done sfc scannow Logon Process Initialization Failure It said it found and repaired a number of corrupt files but could not repair some of them more details of can be found in the CBS log I've had a look through the CBS log and can't make heads or tails of it Unfortunately it's too big to upload unless you want me to paste it here or bits of it anyway I'm trying to avoid doing a clean install unless all else fails Help Thanks in advance

A:Logon Process Initialization Failure

Check this out...  Error: The application has failed to start because the side by - Microsoft Community

http://www.bleepingcomputer.com/forums/t/486640/logon-process-initialization-failure/
Relevancy 80.41%

hi i have the problems with windows 7. first time is my computer attack by .eml virus and then i scan with avira after scaning the computer is restarting. and finnaly i cant logon to my system. how to fix logon process initialitation failure?? best regards

A:how to fix logon process initialitation failure??

Hi decool,

Welcome to Bleeping Computer and sorry for the delay.

Do you still need assistance?

http://www.bleepingcomputer.com/forums/t/381221/how-to-fix-logon-process-initialitation-failure/
Relevancy 80.41%

I was advised to go here from another forum. Here is the topic there for reference. I'll post what I said in the beginning post.
http://www.bleepingcomputer.com/forums/topic449016.html

My Latitude D620 laptop cannot start up because it has a fatal system error with a blue screen before it can. The error message follows.

STOP: c000021a {Fatal System Error}
The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000135 (0x00000000 0x00000000).
The system has been shut down.

Before this error, the laptop would take a while to logon after I woke it up from standby. I had no clue if there was a virus on it or not to be honest.

I have already tried a system restore from xPUD and checked the memory module for any problems.

I would greatly appreciate help in resolving this issue!

A:Logon Process Fatal Error

Did you install any hardware or software before this started happening?
Can you boot into safe mode? (Tap F8 on startup until you get the menu with Safe Mode).
If you can boot into Safe Mode, use Blue Screen View (http://www.nirsoft.net/utils/blue_screen_view.html) and post up either a screenshot of the blue screen and/or the .dmp file. This will enable someone to help you further.

http://www.bleepingcomputer.com/forums/t/451288/logon-process-fatal-error/
Relevancy 80.41%

Hello I know I should have really done a search for this before posting but to be perfectly honest I am a bit of a n b when it comes to PCs and fixing them wthout the help of my boyfriend so I d have no idea what it was I was searching for He s not here either and thus I need help I hope I ve got this in the right section The problem started off as simply needing the Windows XP Home Edition disk to restore my PC back Logon Windows Process failure? to the way it was Unfortunately I hadn t been able to get hold of a disk until today and then we happened upon a completely different problem when we attempted to fix it Of course the disk couldn t work because a blue screen came up after it attempted to get past the windows loading screen thing saying STOP c a Fatal System Error The Windows Logon Windows Logon Process failure? Process system process terminated unexpectedly with a status of x x The system has been shut down Now I have no idea what has caused any of these problems wth the PC I clearly have no idea what has gone wrong with it this time I don t have access to the Home Edition disk anymore because it had to be returned and I m getting a bit panicked that my PC isn t saveable I have files on there that if they were lost would break my heart quite literally Please if anyone knows how I can fix this problem or tell me what s wrong with it so I can find an answer I would greatly appreciate it Thank you nbsp

Relevancy 80.41%

Hi -
When I try to boot my HP Compaq laptop I get this message in a dialog box.

This computer has been overheating and either powers down itself or we power it down.

Here's what is in the dialog box:
Logon Process Initialization Failure​Interactive logon process initialization has failed​Please consult the event log for more details.​Then an OK button.​
After I press OK I get a black blank screen. I turned off the computer.

What should I do? Your help will be appreciated.

Doug Roberts
 

A:Logon process initialization failure

Hi -
The problem is not fixed.

I was able to boot in command mode and run SFC /SCANNOW. That ran and now I can boot in safe mode.

When I do a regular boot I still get the Logon Process Initialization Failure, but now I cannot get out of it without powering off.

Doug
 

http://www.techspot.com/community/topics/logon-process-initialization-failure.185253/
Relevancy 80.41%

Hi all A switching PW incorrect after Recovery - PIN - - Bug? logon to options? couple months ago I switch my Windows account local - Admin password PW incorrect after switching to PIN logon - Bug? - Recovery options? - to a PIN I recently attempt to re-institute a password but when asked to enter my password was notified that it was incorrect I have tried many different passwords as well as the current PIN used to logon I'm almost certain that the PW I'm entering is correct I realize this may be a common problem forgetting the PW after having used a PIN for a while but I use a PW manager Kneepass so it was and is recorded in that database Additionally I've used the same Windows logon for ages and am not in PW incorrect after switching to PIN logon - Bug? - Recovery options? - the habit of changing it never have to my memory Are there any known bugs with respect to changing over to a PIN and subsequent PW problems What is the best method for me to recover my account A the moment the only method I can imagine would be to create another user admin account and copy my data over will this work any tips or things to look out for Thanks so much This is my first post but I've been a long-time reader and love the tutorials Note - the account in question is a local account - no PW recovery disk was every made

http://www.tenforums.com/user-accounts-family-safety/54728-pw-incorrect-after-switching-pin-logon-bug-recovery-options.html
Relevancy 80.41%

Ok, this one isnt as easy as it seems.

I know about the temporary user problem when a user has their folder deleted & try to log in again & get a Temporary User profile. However, my problem is a little more servere.

Any new user that tries to log on gets the Temp profile.
3 previous user profiles work ok. However, one of them changed their password & they then got the Temp profile.
The PC is connected via a Domain, so i removed the PC from the Domain, added it to Workgroup & logged in locally as a new user with Admin rights & I still get the Temp profile.
I've checked the permissions & the registry & cant find anything wrong.
This is what gets reported in the error log:

Thanks in advance.

A:Vista logon problem, Users only get a 'Temporary Logon'

nobody?

http://www.vistax64.com/network-sharing/280317-vista-logon-problem-users-only-get-temporary-logon.html
Relevancy 80.41%

i have face with the following problem..i joind with domain successfully but when i created a user in domain and to logon client 
computer the follwing error occure plz help me with a few simple step in windows 8 or 8.1
note
i have windows server 2012 r2 in Domain computer

https://social.technet.microsoft.com/Forums/en-US/3374b827-6eea-4fb1-9494-8a8b3eb59720/there-are-currently-no-logon-servers-available-to-service-the-logon-request-windows-8?forum=w7itpronetworking
Relevancy 80.41%

Hi there,

I have a windows 7 pc in a "domain", so when you get to the initial windows 7 welcome screen (prior to logging in as a user), you get a blank transparent Picture

A:How to change Logon screen Picture frame (before logon)

Its ok, managed to get it working, seemed to work when i did it again, strange. No blank picture frame now, just a customised "picture frame" that appears prior to logon, just what I was after. Hope this helps anyone else trying to achieve this.

http://www.sevenforums.com/customization/60474-how-change-logon-screen-picture-frame-before-logon.html
Relevancy 80.41%

Hi,

Is there a way to remove the logon picture.

or make the picture smaller.

it ruins my logon wallpaper
let me know!

A:Logon screen, change/remove logon picture

There are some links in this thread which may be of help - Remove the Login Screen Icon

Danny

http://www.sevenforums.com/customization/178976-logon-screen-change-remove-logon-picture.html
Relevancy 80.41%

Vanilla Dell Inspiron 1720 laptop running Windows Vista. It has never had a login account or password protection, and is only used in single user mode.

Yesterday, start-ups fine, no password. Today, I'm presented with the user logon widow prompting me for a password, and cannot logon to Vista!

No-one has meddled with the laptop. Don't know if SP1 was automatically downloaded
and installed - whatever the factory defaults were from Dell. I've not seen any references to this kind of issue on Vista, but have heard about a similar thing with NT.

Any suggestions how this could have happened?

Yes - I know I can reset passwords using the NT Password Editor (http://home.eunet.no/~pnordahl/ntpasswd/).
 

Relevancy 79.55%

Please consult the event log for more details.

I am not knowledgeable with computers, could someone walk me through how to fix this? It is an hp laptop.

I cannot boot past startup at all. This happens in all the variations of safe mode as well.

I can press f8 on startup and go to repair your computer.

Startup repair doesn't detect anything.

System restore doesn't help too.

System image recovery does nothing too.

Anyone here know how to fix it and walk me through it?

Relevancy 79.55%

I have this error box on my dell laptop and I can't get rid of it. I have tried to set to an earlier recovery point but it always comes back with the same error. All attemps to repair it has failed. Any ideas as to how to fix this short of reformat?

http://www.techsupportforum.com/forums/f217/interactive-logon-process-initialization-has-failed-440570.html
Relevancy 79.55%

I have a dell laptop Studio 15. Windows 7 Home 64bit. Tonight I got some strange error saying it couldn't find some file. Then it restarted it self. Did a disk check. Found tons of errors, fixed them, and then when it restarted I got the error "Interactive Logon Process initialization has failed. Please consult the event log for more details.

# 1 How do I consult the event log when I can't even get to a command prompt?

#2 Is there a fix somewhere for this? Dell didn't give me a windows 7 operating system disk. Called them and had them send it to me but it will be 1-2 business days. Hoping to get this fixed tonight though if possible.

Any help would be appreciated. Thanks!

Melissa

A:Interactive Logon Process Initialization Has Failed....HELP

I found a Windows 7 Recovery tool for those that don't have the windows 7 cd rom. It did a scan and this is what it found.

Diagnosis and repair details:

Registry is corrupt

Repair action: registry rollback

Result Failed: Error Code = 0x20
I tried to do a restore point to restore it to a previous state. That failed as well.

Right now am doing a chkdsk /r on the drive. Hope that works. Otherwise. I'll have to wait until Dell sends me the windows 7 operating system disk and then just hopefully reinstall windows over itself. That should fix the registry issue. It has in windows xp in the past. Will this work with windows 7?

Mel

http://www.sevenforums.com/general-discussion/128473-interactive-logon-process-initialization-has-failed-help.html
Relevancy 79.55%

When I start my computer it shows the windows screen and then about to seconds later it windows system Help! logon error! process blue-screens and gives me the following error Stop c a The windows logon process system process terminated unexpectedly with a status of xc x x The system has been shut down Here is my system information Sony vaio model PCG- CL Windows XP and I'm almost positive I'm running with SP installed Here's windows logon process system error! Help! what happened before I restarted my computer and saw this error for the first time I received a message that my computer was low on memory and space on the c drive I did the disk cleanup and removed some programs that I haven't used in a long time These were programs that I had previously installed and just don't use anymore I also removed the files that it pulls up when you run the disk cleanup Seemed harmless I've done this frequently over the years that I've owned my computer and it's never created any problems Here is what I have tried to fix the problem I tried unplugging from the wall and removing battery I tried F and F to see if it would start in safe mode nothing happened I loaded my system recovery disk that I had created and it booted and began to ask for disk of in the recovery process It gave me a warning sign that I should back up my computer before I proceed so I cancelled the system recovery because I have files on the computer that I cannot afford to lose My next step was to take my computer apart remove the hard drive and back up my files with the device that treats it as an external hard drive I've put everything back together and am still in the same place with the error code mentioned above Here is my question Now that my files are backed up I would like to return my computer to it's original condition when it was purchased Can I do this by running the recovery disks or does this just get me to a point where I can operate the computer and then I should set it back to original condition by picking the earliest date available as a restore point on my computer Also does anyone think that's a bad idea and have a better plan I'd appreciate any advice

A:windows logon process system error! Help!

Hi , Put your windows cd in your cd rom drive or dvd , Bring up a command prompt.
Start/run/type cmd in the box and press ok.
Once you have a prompt , type at the prompt sfc /scannow exactly as shown.
This will compare your system dll files against the originals on the windows cd.
should work, hope it helps you

http://www.techsupportforum.com/forums/f10/windows-logon-process-system-error-help-202449.html
Relevancy 79.55%

Requesting assistance:
When I boot up my windows XP I get the following frozen message against a blue screen.

Stop: c000021a (Fatal System Error)
The windows logon process system process terminated unexpectedly with a
status of 0xc0000005 (0x00000000 0x00000000)
The system has been shut down.

Does anyone have any suggested steps to fix this problem?

Thank you in advance for your assistance.

Regards,

Mark
 

Relevancy 79.55%

I've just finished doing a boot time Avast scan on my nephew's laptop - but now after it finishes that and continues to load Windows, I get this message:

Sounds rather serious to me - can anyone help? I hope this doesn't involve having to send the machine away. I recently had to do a factory default reinstall as the system had stopped responding - no matter what I did (it started doing that after installing the Norton crap that came with it, so Norton's going nowhere near any system of mine in the future.

I'm going to try Windows' repair options, but I'm not too hopeful.

Edit:OK - after a couple of restarts (before trying Windows' repair options), Windows has loaded successfully. What could've caused this and what can I do to avoid it happening again?

A:Interactive logon process initialisation has failed

No one at all? Has this been posted in the right place, if not could a mod please move it? Thanks!

http://www.sevenforums.com/bsod-help-support/149013-interactive-logon-process-initialisation-has-failed.html
Relevancy 79.55%

Hello guys,

I am trying to understand the cause of a BSOD happening on my laptop. I have ran DM Log collector and attached you can find the results.

Thanks in advance for your help!

Gabriele

http://www.sevenforums.com/bsod-help-support/401412-bsod-happening-during-logon-process-only-after-reboot.html
Relevancy 79.55%

Hello,
Recently I started getting this error when starting up windows:



I usually just restart the computer and it doesn't appear again, until I shut down the computer completely and turn it on again.
I also tried choosing normal startup in msconfig but it didn't work.

Anyone knows how to fix it so it wont appear again?

A:[SOLVED] Logon Process Initialization Failure

Download the Microsoft Hotfix: "Logon Process Initialization Failure" error message and the logon process does not start in Windows 7 or in Windows Server 2008 R2

http://www.techsupportforum.com/forums/f217/solved-logon-process-initialization-failure-713457.html
Relevancy 79.55%

I was running windows Vista on an Accer Aspire when I posted a thread on April th Malwarebytes says quot Two Worm Brontok s a hidding quot Files Infected C Users JimSandy Templates A kotnorB com Worm Logon Failure - Initialization Process Interactive HELP! Brontok - gt Delete on reboot C Users JimSandy Templates -NendangBro com Worm Brontok - gt Delete on reboot -------------------- I ve been patiently waiting for a response but now have lost my computer all together I am only receiving a Logon Process Initialization Failure Interactive logon process initialization has failed Please consult the even log for details OK Of course I can t consult anything since it won t even boot in quot Safe Mode quot I hit OK and the quot Failure Notice quot dissapears and reappears I can only shut-down by pressing and holding the start-up button I am on my wife Sandy s Lenovo N Windows Vista and she says quot Be careful with my computer quot Please quot I don t HELP! - Interactive Logon Process Initialization Failure have a clue quot and I urgently need some HELP Thanks a Bunch Jim o Sandy lt gt lt nbsp

A:HELP! - Interactive Logon Process Initialization Failure

"BUMP" SOLVED!!!!!! VICTORY OVER "ILPIF" & WORM.BRONTOK

I didn't get help from anyone on the "forum"! I did an Internet search for Interactive Logon Process Initialization Failure "ILPIF" problems and found several folk who's lives had tumbled down around them with the same problem on Windows Vista, all running new machines. Two folk conviced Dell that this was not a virus and are getting new motherboard from their warrenty.

I went to two technitions. One said it was a virus and I should take it back to PC world to have them take care of the problem under warrenty.

The "Tech Guy" at PC World was very kind and gave me a contact that would try to save the memory off my HD supplied me with instructions for wipping my HD!

I was not encouraged but kept surfing looking for less drastic solutions. One guy said that he had been able to sneak past the "dead end ILPIF" screen by fiddling with the "F" buttons at the beginning of boot before Windows was accessed. I eventually got some scan possibilities, non of which changed the ultimate arrival at the same "dead end"! However, with much prayer from several sources, I was able to find a restore button, which, though it threatened that changes would be irrevesible, gave me the opportunity to go back ten days! All my viruses are gone and the computer is restored!

Hope this can be of help to someone!!
JimSandyBunch

Junior Member with 2 posts.
Join Date: Apr 2009
Experience: Intermediate

30-Apr-2009, 08:08 PM #1
HELP! - Interactive Logon Process Initialization Failure
I was running windows Vista on an Accer Aspire 5735
when I posted a thread on April 27th...

Malwarebytes says, "Two Worm.Brontok's a hidding?"

Files Infected:
C:\Users\JimSandy\Templates\A.kotnorB.com (Worm.Brontok) -> Delete on reboot.
C:\Users\JimSandy\Templates\11496-NendangBro.com (Worm.Brontok) ->
Delete on reboot.
--------------------

I've been patiently waiting for a response but now have lost my computer all together! I am only receiving a....

___________________________________________
Logon Process Initialization Failure
* Interactive logon process initialization has failed.
Please consult the even log for details.___________________________________OK_

Of course I can't consult anything since it won't even boot in "Safe Mode".
I hit OK and the "Failure Notice" dissapears and reappears! I can only shut-down by pressing and holding the start-up button.

I am on my wife Sandy's Lenovo N500 (Windows Vista) and she says "Be careful with my computer!".

Please, "I don't have a clue" and I urgently need some HELP!

Thanks a Bunch! Jim\0/\o/Sandy <')))><
 

https://forums.techguy.org/threads/help-interactive-logon-process-initialization-failure.823204/
Relevancy 79.55%

I am completely rubbish with computers, dont know much at all.
I removed Avast anti virus from my HP desktop computer, when i restarted it the screen is black with a note saying "interactive logon process initialization has failed. Please consult the event log for more details".
The computer is a few years old now but it did work fine up until now.
To make matters worse, i dont have a recovery disk, plus there is some data on the computer which i need to keep if at all possable.
help me please

A:interactive logon process initialization has failed.

Go back a few days before the problem began with system restore. The software will be back, but then we can remove the correct way
System Restore - How to

http://www.vistax64.com/general-discussion/287757-interactive-logon-process-initialization-has-failed.html
Relevancy 79.55%

Dear Forum failed the... has process logon [SOLVED] to create I did search this forum for this problem and I hope I didn't miss it but to my surprise I found no mention of it Otherwise many other forums have several and lengthy threads [SOLVED] logon process has failed to create the... concerning this problem from way back in to the present And none of the threads that I looked at concluded with the fix Hopefully for some reason I just never saw the right post and someone's going to tell me that I'm wasting the forum's time because this was solved a long time ago But here it goes Every once in a while after I tap the space bar to wake the computer up and after the Vipre antivirus immediately announces that it's downloading new definitions Vista locks up shortly after Vipre is done its download And when I say Locked up you do have some slight functionality but you can't do a shutdown or restart You have to eventually do a hard shutdown If you hit ctrl alt del for the task manager the screen eventually goes black Then after a while a message box appears with the title bar text quot logon process has failed to create the security options dialog quot and the message text starting with a quot X quot in a red circle icon quot Failure - Security Options quot After you click on the message box's OK button you now go to a very strange foggy looking desk top And as many times as you hit ctrl alt del you can return to the black screen with the message box then click OK and return back to the foggy desktop I read many posts on this in several other forums and the only apparent commonality is Vista bit bit Symantec Norton Vipre Western Digital Seagate HP Dell DIY rigs except for running Vista it seemed like eveyone complaining of this problem had a different kind of system And the only post I read that sounded like the person might have knowledge of this said it has to do with Windows Firewall and or Windows Defender I do use the Windows Firewall but not the Windows Defender that's turned off as recommended by Vipre I believe I hope someone can help me with this and like I said I hope this problem was solved a long time ago and I'm just wasting everyone's time Sincerely Rand

A:[SOLVED] logon process has failed to create the...

Hi Rand -

What happens if you remove Vipre a/v (as in get rid of it completely - un-install)? Do you have link for this product - I've never heard of it, not that fact really means anything of course.

Does it have a firewall?

What happens when you boot into SAFEMODE ? Try it - tap F8 repeatedly during boot-up.

I assure you - never a waste of time to try and help. After all, by my calculations you have about 5.5 years until you build your next system, right?? (I read your post from last fall !!).

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f217/solved-logon-process-has-failed-to-create-the-362838.html
Relevancy 79.55%

I have a PC process initialization failed has Interactive logon that dual boots both XP and Yesterday I restarted my computer to go from to XP to play a game all fine and dandy so Interactive logon process initialization has failed far Interactive logon process initialization has failed When I came back onto windows the Windows intro logo loads disappears as usual but instead of loading by desktop I get quot Interactive logon process initialization has failed Please consult the event log for more details quot So I decided to go check my event log I booted on XP went to G Windows System winevt Logs copied the file Application evtx to my USB key and opened it up on another Win system to check it out I thought I could find the error but I can't get any logs out of the event log The last entry being a month ago for some reason I want to avoid formatting my Win partition at all costs so this is my last resort countless hours of searching on google has given me nothing I find this frustrating as I am not a 'noob' with computers I usually fix other people's problems but this one just has me stunned Also Safe mode doesn't work System restore doesn't work System repair doesn't work Nothing works I've tried almost everything so far Please keep in mind that I do in fact have complete access to my G partition which is my Win partition Thank you very much internets to the person who can help me solve this

A:Interactive logon process initialization has failed

Welcome!

Have you tried a Startup Repair?

You can also try logging into the built-in Administrator account in Safe Mode. You may have a corrupted user profile.

If you can log into that account, you can create a new account.

http://www.sevenforums.com/bsod-help-support/73001-interactive-logon-process-initialization-has-failed.html
Relevancy 79.55%

Hi All,

Toshiba Satellite A300 Model PSAG8E
Windows Vista (32 bit)
Hard Drive was replaced about 1-1 1/2 years ago.
NO restore/Backup discs


Have come to switch on PC and get black screen with error message
Logon Process Initialization Failure
Interactive loon process initialization has failed
please consult the eventlog for more details
press ok

Click ok and message keeps coming up, have tried booting into safe mode, last good configuration - all the same message. cant get past this message.
Have read previous threads here and via google that mention Knoppix but didn't want to try without real/simple instruction in case I do any FURTHER damage.

Can anybody give me any help in simple steps please. THANKS

I have a recovery disk from a Toshiba Equium A200.
 

A:Logon Process Initialization Failure - Vista

Hi my friend , you can look at this solution by PJPoon in #3 massage :wave

http://www.neowin.net/forum/topic/519877-logon-process-initialization-failure/
 

http://forums.majorgeeks.com/index.php?threads/logon-process-initialization-failure-vista.276745/
Relevancy 79.55%

Hello All I've seen this a number of times Wife brought computer out of sleep mode and got this happy error message Had been having problems bringing out of sleep mode in the past and initialization failed interactive logon process has had to power down on occassion interactive logon process initialization has failed Has anyone really found out what this means as I have an inflicted computer with this nonsense and can't boot up Vista Based on alot of wasted effort and reading I have tried Running Repair - No errors detected Running Restored Points - same error message Got Disk from Dell - Repair from Bootable Disk - no errors detected Looked at Event Log - didn't really know what I was looking at one user stated a corrupted manifest file which was nowhere in the log Chkdsk at the command line - no errors Can't run SFC since I now have a pending repair that requires a reboot to finish but never gets there Time to take a gun to my head Any words of wisdom regarding this issue or am I doomed Thank you Thor Lane

A:interactive logon process initialization has failed

Maybe think about reflashing your Bios, alot of sleep problems relate to your bios. Actually you didnt mention that you did this, go to your manufacturer's website and see all the drivers and software updates for your computer, install those.
NB\ Reflash your bios as a last resort, the drivers and software updates should come first for your dell.

http://www.vistax64.com/general-discussion/246575-interactive-logon-process-initialization-has-failed.html
Relevancy 79.55%

Hello,I recently received a new ASUS Eee PC running Windows 7 Starter. It started fine the first 3 or 4 times I have tried to use it, but now, I am receiving this error message:Interactive logon process initialization has failed.
Please consult the event log for more details.I get the same message in safe mode, and the Repair Your Computer and Last Known Good Configuration options do not work. The computer has not created a system restore point, and I could not burn a system image due to lack of a burner (I have an external one on order).Is there anyone who would be able to help me solve this problem? Thanks!

A:Interactive logon process initialization has failed

If this is new, then you should probably contact ASUS support or your retailer. The more things that you do to try and repair this on your own, the more they will try and blame the problem on you resulting in possible repair charges.

http://www.bleepingcomputer.com/forums/t/378555/interactive-logon-process-initialization-has-failed/
Relevancy 79.55%

Hi Everyone,I have Vista Home Premium and my computer has not been booting up (black screen). I have on occasion received a 'interactive logon process initialization has failed' message. (followed by Please consult the envent log for more details).I am not real computer savvy, but am nervous about losing my info on computer. I can cut the computer on and off several times, and after a couple of tries, the computer will log on.Any current fixes out there and should I try to back up before I do anything?Thank you

A:interactive logon process initialization failure

Welcome to bleepingcomputer Wentwood.

Can you boot into Safe Mode? You access this by pressing F8 repeatedly once you push the power button.

It may be useful if you post the make and model of this computer.

http://www.bleepingcomputer.com/forums/t/476048/interactive-logon-process-initialization-failure/
Relevancy 79.55%

Some WIN 7 users (me for one) seem to have this issue after latest windows updates installed on 09-06-2016 (latest KB installed: KB3156017) when trying to open a terminal server connection: the current user and "use another account" option is displayed
twice. This is a company domain setup and updates are installed via WSUS.
Is this some kind of registry setting?

https://social.technet.microsoft.com/Forums/en-US/61aa4c44-70a8-4f3d-8d54-023fc1c94d40/terminal-server-client-shows-logon-options-twice?forum=w7itprosecurity
Relevancy 78.69%

Hi,

I have a laptop which has stopped running since yesterday evening and gives me this error on a dialog box due to which I am not able to logon to the system. When I restart my machine, it gives me 4 options i.e.

Safe Mode
Safe Mode with Networks
Safe Mode using command prompt
Logon normally

I tried all 4 of them if atleast any of these allows me to login, but none worked. I referred to the solutions and fixes available on the internet, but all of them says that I need to press F8, enter into a safe mode and operate the issue from there. But even pressing F8 doesn't make any change.

Did anybody faced same issue? How do I resolve this?

Thanks.

A:Interactive logon process initialization has failed on Windows 7

Start with these free, bootable diagnostics: Initial Hardware Diagnostics

http://www.sevenforums.com/bsod-help-support/235650-interactive-logon-process-initialization-has-failed-windows-7-a.html
Relevancy 78.69%

I cannot determine what led to this problem but my laptop is no longer able to log into windows properly win bit When it logs initialization has process cannot logon failed interactive - into log windows on the desktop is black blank and immediately a message appears interactive logon process initialization has failed please consult the event log for more details I cannot carry out any task The things I've tried so far and haven't worked safe mode - same message startup repair - the first time I ran it these two things appeared thereafter nothing system restore result failed error code x f system files integrity check and repair result failed error code x system restore - I get this error regardless of restore point x ffff I also took out the hdd and ran antivirus programs malwarebytes and antivir from my PC but nothing noteworthy Also copied all the event logs from the hdd and have them handy but I dont know what to look at and how to analyze Lastly I have managed to boot UBCD win Xp OS on CD which is the only thing that cannot log into windows - interactive logon process initialization has failed will allow me to investigate things internally as opposed to via the other pc So what further steps could I take other than format of course

http://www.techsupportforum.com/forums/f217/cannot-log-into-windows-interactive-logon-process-initialization-has-failed-522067.html
Relevancy 78.69%

Hello Trying to repair a Dell Inspiron Model N which upon starting up pops up the Interactive Inspiron Logon process Interactive Dell error on msg Logon Process initialization has failed message The OS Interactive Logon process error msg on Dell Inspiron is Windows Home Premium but I'm not sure if it's or bit This machine has not been running for almost a year and there is nothing on it that needs to be saved so mostly I'd just like to wipe correct what ever is wrong with it and go back to Square One or that fresh-smelling OOBE I've tried all the usual routes F and all the variants of Safe Mode but all of them result in the same error message I also Interactive Logon process error msg on Dell Inspiron tried the Last Known Good Configuration but that just resulted in the laptop sitting there quietly humming along for over half an hour before I Interactive Logon process error msg on Dell Inspiron powered it down I've got an old System Recovery Disc but it's for a bit system and when I tried Startup Repair on the Recovery partition a window popped up indicating that this version of System Recovery Options is not compatible with this version of Windows which is why I'm thinking it's a bit system Well all that led me to head over to Digital River to grab a legal copy of a System Recovery disc for a bit system but alas for those that have been following that fiasco these iso files are no longer available I've also tried all the other options from the -bit Recovery Disc and upon it's initial launch I see two versions of Windows the C Recovery as well as the D OS - but doesn't that seem backwards Startup Repair which results in could not detect a problem message System Restore it can't find any restore points System Image Recovery which I can't use since the owner never created that media Windows Memory Diagnostic which reboots the machine and then gives no other info see UPDATE below Command Prompt would not even know where to start with this one Recovery Manager which leads me to the Microsoft System Restore amp MS Startup Repair Tool which just loops me back around So that's where I'm at currently As I mentioned there is nothing on this machine Files Photos etc that needs saving am just looking to get it back to working correctly Any ideas on what steps to take next or steps I might be missing I'm only a partial noob so if you've got some semi-complex steps you think might work feel free to pass them on as I'm ready to try almost anything including some flavor of Linux that might help me restore this Windows OS UPDATE Just before I posted this I popped that System Repair Disc out and rebooted more time and now the Windows Memory Diagnostics Tool appears to be running Test pass of ran and the status never changed No problems have been detected yet Test pass of ran and the status did not change No problems have been detected yet Computer then restarted giving me the option to load one of the two Windows profiles and I selected the st one listed which resulted in the old Interactive Logon message I rebooted selected the nd one listed and finally got to the sign-in page entered in the password screen went white and then pow got the Blue Screen of Death which only flashed for about seconds I'm going to try to capture the info codes listed there Winterland

A:Interactive Logon process error msg on Dell Inspiron

F8 takes you to the Advanced Boot Options.  With this computer there should be the option Repair your computer.  This will access the System Recovery partition to set the operating system to the state it came out of the box.  You can find instructions for this here.

http://www.bleepingcomputer.com/forums/t/566511/interactive-logon-process-error-msg-on-dell-inspiron/
Relevancy 78.69%

Hi Unfortunately I'm having a bit of problem here with running a Windows Vista Ultimate x on my machine Do not ask why please P The specs of my PC are noted at the end of the post The problem is that having done a quot fresh quot install Process Vista Initialization - Ultimate Failure x64 Logon of Logon Process Initialization Failure - Vista Ultimate x64 the OS on my PC I randomly not always get an error notably this one when logging in and before getting it the boot load takes ages Logon Process Initialization Failure Interactive logon process initialization has failed Please consult the event log for more details Now I know that there are Logon Process Initialization Failure - Vista Ultimate x64 many solutions on the net but the weird thing is that I did multiple quot clean quot installs from scratch and I get this error and sometimes the windows services fail to run and the OS is just unstable How could this be possible when I do clean installs Things like system startup repair system restore and many other solutions out there did not help Well they shouldn't because even a fresh install failed On the other hand Win work with no problem I really have no clue why I'm getting this can anybody help Highly appreciated PC specs CPU Intel Core i K GHz C Haswell nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard Gigabyte Technology Co Ltd Z X-SLI-CF SOCKET C Graphics DELL U H x Hz Intel HD Graphics Gigabyte MB NVIDIA GeForce GTX Ti EVGA C Storage GB Seagate ST DM - CH SCSI Disk Device SATA GB Crucial CT MX SSD SCSI Disk Device SSD C GB Crucial CT MX SSD SCSI Disk Device SSD C Optical Drives ASUS DRW- B ST i SCSI CdRom Device Audio Realtek High Definition Audio

A:Logon Process Initialization Failure - Vista Ultimate x64

Maybe install Vista SP1 and SP2 and all updates, see if that resolves the problem?

http://www.vistax64.com/general-discussion/304098-logon-process-initialization-failure-vista-ultimate-x64.html
Relevancy 78.69%

how do correct this, if i can't access any of my user accounts, including the administrator user account as well? The user account logons but terminates unexpectedly on my eMachine...I am using Windows XP. Thank you for any help at all!

Computneticz
 

A:Windows Logon System Process terminated unexpectedly

If you can boot to safe mode, you might be able to fix the problem. If you can't, you might need to do a repair install of Windows XP.
 

https://forums.techguy.org/threads/windows-logon-system-process-terminated-unexpectedly.794341/
Relevancy 78.69%

Today, I've been racking my brain trying to figure out how to recover from a problem with winlogon.exe which caused a "Windows logon process terminated" error with codes 0xc00021a and 0xc000034.

I found this article and it helped but didn't solve the problem. I thought I was faced with having to run a repair of the Windows installation, if not re-install.

That is until I decided to scan winlogon.exe using one of the online scanning services, like Jotti or Virus Total, to see if winlogon.exe had been infected. That's when I discovered the file was MISSING from \windows\system32. A Google search on a missing winlogon.exe file turned up this thread which provided the solution I needed!!!!

Many thanks to "coderitr" for your post! Copying winlogon.exe from \windows\servicepackfiles to \windows\system32 solved the problem beautifully!

Thanks!!!!!

Peace...
 

https://forums.techguy.org/threads/solution-to-windows-logon-process-0xc000021a-error.942682/
Relevancy 78.69%

Hi Support,
I am using Windows 7 professional operating system.It is laptop.When i switched ON the laptop,i got an error message " Logon Process Initilization Failure".The screenshots are attached for your reference.
I Switched OFF and again switched ON the laptop.I didn't get the message again.
Please let me know what is the root cause of this error and alos let me know how to fix it.
Your support is highly appreciated.
Thanks in advance.
R.Pradeep

https://social.technet.microsoft.com/Forums/en-US/f12404d1-226a-4ef2-9888-2126dfb10161/logon-process-initilization-failure-in-desktop-screen?forum=w7itproui
Relevancy 78.69%

To process windows unexpectedly system logon terminated preface this I installed software windows logon process system terminated unexpectedly yesterday on my Dell Inspiron w Windows XP Home and since then I cannot log on I have a bit of a background in computer repair and I'm familiar with the recovery console so I was hoping I could activate the system restore from there windows logon process system terminated unexpectedly Safe mode is not an option What I believe windows logon process system terminated unexpectedly happened is that I had SP and not SP and the software was only compatible with SP though I can't verify right now or I don't know how Is that possible without booting to find out I have a good deal of my machine backed up but I am fighting for the most recent two months' work Would very much appreciate any help - Windows XP Home on Dell Inspiron with SP I think - Error quot STOP c a quot Windows logon process system terminated unexpectedly at xc - Software installed was Avid Pro Tools SE I don't have access to an XP disc right now but I can within a day or two thanks to my school As I mentioned I have an external with of my critical data on it already if it were possible to manually extract the files I want to salvage by copying them to the external I would love to try that also However the problem I've encountered is quot Access Denied quot when trying to navigate to the documents and settings folder Is having an XP cd a prerequisite for going into recovery console and trying this stuff I will work on getting one Thanks ahead of time

A:windows logon process system terminated unexpectedly

Hi and welcome to TSF you could try hooking up to a usb external caddy and connecting to another computer or even this Use Ubuntu Live CD to Backup Files from Your Dead Windows Computer - How-To Geek

http://www.techsupportforum.com/forums/f10/windows-logon-process-system-terminated-unexpectedly-577468.html
Relevancy 78.69%

Hi First of all let me thank the guys running this awesome website The volume of information here is fantastic Unfortunately I'm having a bit of problem here with running a Windows Vista Ultimate x on my machine Do not ask why please P The specs of my PC are noted at the end of the post The problem is that having done a quot fresh quot install Initialization Process x64 - Failure Vista Logon Ultimate of the OS on my PC I randomly not always get an error notably this one when logging in Logon Process Initialization Failure Interactive logon process initialization has failed Please consult the event log for more details Now I know that there are many solutions on the net but the weird thing is that I did multiple quot clean quot installs from scratch and I get this error and sometimes the windows services fail to run and the OS is just Logon Process Initialization Failure - Vista Ultimate x64 unstable How could this be possible when I do clean installs Things like system startup repair system restore and many other solutions out there did not help Well they shouldn't because even a fresh install failed On the other hand Win work with no problem I really have no clue why I'm getting this can anybody help Highly appreciated PC specs CPU Intel Core i K GHz C Haswell Logon Process Initialization Failure - Vista Ultimate x64 nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard Gigabyte Technology Co Ltd Z X-SLI-CF SOCKET C Graphics DELL U H x Hz Intel HD Graphics Gigabyte MB NVIDIA GeForce GTX Ti EVGA C Storage GB Seagate ST DM - CH SCSI Disk Device SATA GB Crucial CT MX SSD SCSI Disk Device SSD C GB Crucial CT MX SSD SCSI Disk Device SSD C Optical Drives ASUS DRW- B ST i SCSI CdRom Device Audio Realtek High Definition Audio

http://www.sevenforums.com/general-discussion/381734-logon-process-initialization-failure-vista-ultimate-x64.html
Relevancy 78.69%

Can some one help me understand what seems to be the problem.
 
I can log on the domain using my credential as admin. But any user with less then admin gets the following error:
 
Can't logon because the logon method you are using is not allowed on this computer.
 
Does anyone know what needs to be done?
 
Thanks!

https://social.technet.microsoft.com/Forums/en-US/b17076f0-4a09-476b-805b-c5564e105c73/cant-logon-because-the-logon-method-you-are-using-is-not-allowed-on-this-computer?forum=itprovistanetworking
Relevancy 78.69%

Dear All I am at work and Looping Problem, Logon/Logoff Logon I am now having serious problem with my computer I can't log on to my computer running WinXP Pro sp in IBM Thinkpad T When turned on the computer boot up smoothly to Welcome screen awaiting for password After enter the password and hit enter It shows quot Loading your personal settings quot which is normal Yet second after sucessfully logon I got kicked back to the login screen It seems the computer logoff my account automatically showing quot Saving your account settings quot and then it is waiting for password This repeats every time I try to Logon Problem, Looping Logon/Logoff logon always got kicked back to welcome screen after second I tried to logon as computer administrator too but no hope Then I tried to open up a safe mode by pressing F Well Safemode exhibits in the same way as normal mode I also tried the command prompt option The wried thing is I got the Welcome Screen instead of command prompt Basically all options in the Logon Problem, Looping Logon/Logoff F menu lead me to that evil Welcome Screen and autmatically log me off after logon I absolutely have no control over my computer now T T I believe it's some sort of virus that's tricking me but I don't know its name Would someone help me Thanks in advance Joe

A:Logon Problem, Looping Logon/Logoff

I have the same problem now with my Windows 2000 Pro on a Compaq Armada M700. Did anyone ever help you? What was the solution?!

http://www.techsupportforum.com/forums/f10/logon-problem-looping-logon-logoff-119771.html
Relevancy 78.69%

I am receiving this error message along with a user name and password logon boxes everytime l attempt to change anything remotely related to user settings...I am thinking maybe l need to logon to an old works server before l can change these settings...? OR am l speaking nonsense...?

I cannot use disk cleanup, msconfig, or change any user account settings....?

I am completely lost and getting extremelly frustrated as to what to do next...


I am running Vista Business with Service Pack 1.

PLEASE HELP

Thanks in advance

http://www.techsupportforum.com/forums/f217/there-are-currently-no-logon-servers-to-service-the-logon-request-338568.html
Relevancy 78.69%

Im a newbie
We recently bought a new cisco e3000 router and connected our Domain Server ie 2008 and the router to the same switch. Now when you logon from a client say windows 7 or 8 client, this message appears "no logon servers available to service the logon request".

Dont know whether I have to disconnect the cisco router which inturn would prevent us from accessing our ISP's modem internet.
Please help
 

A:no logon servers available to service the logon request

If no other variables in the network has changed it does sound like some kind of routing or DHCP mismatch which needs reconfiguring.

Would you know what I mean If I said can can you logon to a profile local to the client (i.e not on the server) and 'ping' the domain server IP address from a command prompt? Equally can you ping an internet address such as google.com?
 

https://forums.techguy.org/threads/no-logon-servers-available-to-service-the-logon-request.1137309/
Relevancy 78.69%

My method for automatically changing the Windows logon logoff wallpaper with every logon Step Use one of the many guides on the web to enable custom oem logon wallpaper such as Brink's Log On Screen - Change Step Copy whatever JPEG images you want to use for logon logoff wallpaper in to C Windows System Wallpaper w/ change automatically Logon logon every - oobe info backgrounds You do Logon Wallpaper - automatically change w/ every logon not need to rename them -- just so long as their file extension is JPG or JPEG they'll be fine Step Copy the following into C Windows System oobe info backgrounds rand vbs Code ' 'rand vbs 'Random logon logoff wallpaper generator 'Author ltwally gmail com ' Option Explicit Dim objFSO objFolder objFile colFiles Dim min max result aWallpaper Set objFSO CreateObject quot Scripting FileSystemObject quot Set objFolder objFSO GetFolder quot quot min max Set Logon Wallpaper - automatically change w/ every logon colFiles objFolder Files For Each objFile in colFiles If LCase Right CStr objFile Name quot jpg quot Or LCase Right CStr objFile Name quot jpeg quot Then If NOT CStr objFile Name quot backgroundDefault jpg quot Then max max aWallpaper max CStr objFile Name End If End If Next Randomize result Int max-min Rnd min objFSO CopyFile quot quot amp aWallpaper result quot quot amp quot backgroundDefault jpg quot True note if you have more than images change aWallpaper to a larger value such as aWallpaper Step Create a custom task in the Task Scheduler with the following properties You need to set the permissions here for an administrator account that has access to C Windows System oobe info backgrounds Add arguments C Windows System oobe info backgrounds rand vbs Startup in C Windows System oobe info backgrounds It's a bit more complicated than just installing a program to do it for you but after you get it going it zero-management just drop whatever images you want to use in that folder

A:Logon Wallpaper - automatically change w/ every logon

You may want to link to this in your thread: Task Scheduler - Create New Task

http://www.sevenforums.com/customization/195878-logon-wallpaper-automatically-change-w-every-logon.html
Relevancy 77.83%

Hi I have been having a problem with my laptop I have received help from another help forum with a boot due Fa Install to to Process Windows Ultimate Vista Initialization 7 help Logon disk with repair tools on which I Install help Vista Ultimate to Windows 7 due to Logon Process Initialization Fa have followed but still stuck with same error Logon Process Initialization Failure So I think a complete install is the only way I have managed to get hold of a Windows installation disk with License but need help doing an install as I have never done a complete install before could anybody please help - Toshiba Satellite A Model PSAG E Windows Vista bit Hard Drive was replaced about - years ago NO VISTA uLTIMATE restore Backup discs CURRENT PROBLEM WHICH IS THE REASON FOR UPGRADE INSTALL Error message when laptop powers up Logon Process Initialization Failure Interactive loon process initialization has failed please consult the eventlog for more details press ok then get the error message again I ran repair tool sfc scan - unable to repair I have tried to run chkdsk r but get message drive is locked then do I want to dismount the drive to continue chkdsk I have tried sfc scannow another message there is a system rpair pending which requires reboot to complete Restart windows and run sfc again Problem Signature Startup Repair Offline Problem Signature Problem Signature Problem Signature Unknown Problem Signature Problem Signature ExternalMedia Problem Signature Problem Signature Os Version Mismatch Os Version Locate ID I have checked EVENTLOG amp got these errors via SIDE BY SIDE Activation context generation failed for C Windows System LogonUI exe Error in manifest or policy file C Windows WinSxS manifests X microsoft windows common-controls b ccf df none Scb f a b ed manifest on line Invalid Xml syntax Activation context generation failed for C Windows System SHELL dll Error in manifest or policy file C Windows WinSxS manifests X microsoft windows common-controls b ccf df none Scb f a b ed manifest on line Invalid Xml syntax Activation context generation failed for C Windows System SHLWAPI dll Error in manifest or policy file C Windows WinSxS manifests X microsoft windows common-controls b ccf df none Scb f a b ed manifest on line Invalid Xml syntax

A:Install help Vista Ultimate to Windows 7 due to Logon Process Initialization Fa

Exactly what are you trying to do...dual-boot, replace Vista?
 
If that disk/license is currently used on another system...that would be an illegal install and will probably result in the owner of said items...being flagged by Microsoft.
 
Louis

http://www.bleepingcomputer.com/forums/t/498249/install-help-vista-ultimate-to-windows-7-due-to-logon-process-initialization-fa/
Relevancy 77.83%

I have a Dell Inspiron n5010 for about two years. I downloaded a large-file game recently, but when I realized that it made my computer freeze, I uninstalled. After that, my laptop suddenly shut down and rebooted, but it automatically went to Startup Repair.
I tried to do System Restore, Dell Datasafe Restore, Safe Mode, Last Known Good Configuration, and all options on F8 screen options. After the Dell Datasafe restore, I got the notification: "Logon Process Initialization Failure: Interactive Logon Process Initialization Has Failed."
I tried to do Safe Mode, but it did not work. I do not have a copy of Windows 7 or an external hard drive. Windows will not start.
What should I do?

A:Logon Process Initialization Failure notification? Cannot start up Windows?

Can you go into safe mode and create a new user account and clean up things from there.
What method did you use to remove the program.

http://www.bleepingcomputer.com/forums/t/400471/logon-process-initialization-failure-notification-cannot-start-up-windows/
Relevancy 77.83%

Hi tech support again Anyway every time I install windows I get this error just as its completing its installation and sending me to the desktop This error only appears after installing windows and only occurs once I never see the error again While this may not seem like much of a problem I am worried it might be a contributing factor to my other tech support problems I have tried installing from both a CD and USB event process failed Interactive - logon Windows 7 initialization See log - has drive Both had the error What is causing this and how do I stop it I am willing to reformat again I don't know how to make sense of the event log if that matters System Specs Below OS - Vista Windows -- gt Windows x -bit or Windows 7 - Interactive logon process initialization has failed - See event log x -- gt x What was original installed OS on system -- gt None custom built PC Is the OS an OEM version Windows 7 - Interactive logon process initialization has failed - See event log came pre-installed on system or full retail version YOU purchased it from retailer -- gt Retail version self-installed Age of system hardware -- gt Almost week Age of OS installation - Windows 7 - Interactive logon process initialization has failed - See event log have you re-installed the OS -- gt Almost week CPU -- gt Intel Core i - K Processor M Cache up to GHz Ivy Bridge Video Card -- gt EVGA GeForce GTX HD Superclocked Video Card - MB MotherBoard -- gt MSI Z A-GD Power Supply -- gt OCZ ModXStream Pro Power Supply - -Watt Modular Dual V Rails SATA Plus Case -- gt COOLER MASTER HAF RC- -KKN Black SECC ABS Plastic ATX Mid Tower Computer Case Memory -- gt Corsair Vengeance GB PC DDR RAM - MHz CMZ GX M A C

http://www.techsupportforum.com/forums/f217/windows-7-interactive-logon-process-initialization-has-failed-see-event-log-644924.html
Relevancy 77.83%

Hi all Everything was fine in my Windows Ultimate bit OS one day it started working with crashes and I end up with new formatting and reinstalling OS But after that the crashes and errors rested The simbtoms are It takes about minutes the OS logon process after that sometimes it crashes and I get BSOD When it logs on it freezes randomly and after I get explorer not responfing error Windows has recovered from unexcepted error really I don't remember the correct name of error Problem signature Problem Event Name BlueScreen OS about crash 30 takes freezes It randomly minute logon process and and Version It takes about 30 minute logon process and randomly freezes and crash Locale ID Additional information about the problem BCCode c BCP E BCP BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Windows Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Event viewer logs Windows was unable to load the registry This problem is often caused by insufficient memory or insufficient security rights DETAIL - The configuration registry database is corrupt for C Users Default Default-PC AppData Local Microsoft Windows UsrClass dat Windows cannot load classes registry file DETAIL - The configuration registry database is corrupt The It takes about 30 minute logon process and randomly freezes and crash device Device Harddisk DR has a bad block It takes about 30 minute logon process and randomly freezes and crash Data error on device Device Device RaidPort Model ST AS Firmware Version Serial Number VECZ Port I have done sfc scannow chkdsk r f Tried to scan hard drive with software DTI Surface Scanner and end up read error cycleing I attached the screens of my OS errors from EventViewer Logs and from cmd and MINIDUMP FILES After this all I have the same state of OS with the same errors I will appreicate for your help thanx guys

A:It takes about 30 minute logon process and randomly freezes and crash

  
Quote: Originally Posted by hayk


Hi all,

Everything was fine in my Windows 7 Ultimate 32 bit OS, one day it started working with crashes and I end up with new formatting and reinstalling OS. But after that the crashes and errors rested. The simbtoms are:

1. It takes about 30 minutes the OS logon process, after that sometimes it crashes and I get BSOD

2. When it logs on it freezes randomly, and after I get explorer not responfing error

3. Windows has recovered from unexcepted error (really I don't remember the correct name of error)

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: c5
BCP1: 0E000000
BCP2: 00000002
BCP3: 00000000
BCP4: 83160795
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\103111-24055-01.dmp
C:\Windows\Temp\WER-29218-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Event viewer logs:

Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.

DETAIL - The configuration registry database is corrupt.
for C:\Users\Default.Default-PC\AppData\Local\Microsoft\Windows\\UsrClass.dat

Windows cannot load classes registry file.
DETAIL - The configuration registry database is corrupt.
The device, \Device\Harddisk0\DR0, has a bad block.

Data error on device.

Device: \Device\RaidPort0
Model: ST9500325AS
Firmware Version: 0003
Serial Number: 6VECZ629
Port: 0
I have done:

1. sfc /scannow

2. chkdsk /r /f

3. Tried to scan hard drive with software DTI Surface Scanner, and end up read error cycleing.

I attached the screens of my OS errors , from EventViewer Logs and from cmd and MINIDUMP FILES.

After this all I have the same state of OS with the same errors. I will appreicate for your help.

thanx guys!


1-SFC reports errors it could not fix. Repair install

2-chkdsk reports bad blocks repaired

3-DMP's show memory exceptions

please run these

These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provi... Read more

http://www.sevenforums.com/bsod-help-support/194776-takes-about-30-minute-logon-process-randomly-freezes-crash.html
Relevancy 77.83%

i am working on a friends lenovo desktop computer with XP the computer boots normal up to the welcome screen after you click the user it loads the settings then the display goes blank the mouse arrow is still there and it moves i can bring up the task manager but that is it it does the same thing in safe mode i got the recovery menu to no after logon display come up and i restored back to a month ago and the same thing i checked the bios there was a setting for the display video it was set to PEG there were other options one was PCI and i forget the other i set it to PCI and no change none of the windows short cut keys would bring up any other screen her CD rom is broken too so i cant do anything with the windows cd yet but if anyone has some ideas until i can get a CD rom in there it would be appreciated i changed a display setting on a computer once and lost the display i think i got it back from the command prompt but i cant remember how i did it nbsp