Windows Support Forum

Touchpad right bottom side is not alligned properly with the...

Q: Touchpad right bottom side is not alligned properly with the...

Yesterday I purchased the HP 15-AB521TX and quite happy with it , except one thing. The touchpad right bottom side is not alligned properly with the laptop surface (It is actually little below the surface) and I can feel it clearly when the border between touchpad and surface is touched with a finger. Because of this when I right click the touch pad goes too low and I feel like I am pushing the touchpad too deep, but the right click works fine without any issues. Is it some problem to be worried about and ask for a replacement / repair? The left side is perfectly fine.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Touchpad-right-bottom-side-is-not-alligned-properly-with-the/td-p/5652370
Relevancy 100%
Preferred Solution: Touchpad right bottom side is not alligned properly with the...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 81.7%

I cannot find a reliable source to tell me my properly is alligned? Is SSD the information I need without reading insane long threads Is my SSD is properly alligned? and debates And at the end I still do not know what I want to know So can you please walk me through this step by step to find out this simple question for my system Is my SSD properly aligned and formatted and whatnot Reason some of the programs on my system with Windows - installed on a Samsung evo SSD like foobar Take 'forever' to show up after clicking the shortcut on my desktop It takes about seconds before the foobar k window to show This is by SSD standards insane On my Samsung sata hdd this was instant I did some tweaking during installation of windows - like removing the reserve partition adjusting alignment installing k-driver to ensure compatibility for newer drives reverting to other drivers than the amd-sata drivers for my motherboard and so forth Now I don't know what could be the cause to slow startup of some programs Sure there is software that does open smoothly but not what I expected in terms of SSD speeds On youtube videos from you see techguys opening applications installed on ssd's and showing how fast this is But this is not what I experience My SSD is a Samsung evo GB from december Windows MSI E AMD motherboard Athlon II AM processor

A:Is my SSD is properly alligned?

  
Quote: Originally Posted by Tango1


Is my SSD properly aligned and formatted and whatnot?

Reason: some of the programs on my system (with Windows7-64 installed on a Samsung 840evo SSD) like foobar2000. Take 'forever' to show up after clicking the shortcut on my desktop..................I did some tweaking during installation of windows7-64, like removing the reserve partition, adjusting alignment, installing 4k-driver to ensure compatibility for newer drives, reverting to other drivers than the amd-sata drivers for my motherboard and so forth.


Run the AS SSD benchmark to confirm proper alignment.

Why did you do all of that tweaking? What led you to believe that was a good idea?

I have no idea how strong that AMD processor is in relative terms. May be strong, weak, or middling.

http://www.sevenforums.com/hardware-devices/357966-my-ssd-properly-alligned.html
Relevancy 70.52%

We just got a Dell XPS-15z, and, we have questions about scrolling on the Cypress touchpad using the Cypress drivers.

When scrolling down (either one finger or 2 fingers), when you hit the bottom of the touchpad, is there any way for the scrolling to continue without your having to lift your finger(s) back to the top of the touchpad? On other Dell laptops, I have Chiral motion, or the scrolling continues so long as your finger is at the bottom of the touchpad? I tried enabling the "Continued Motion" option just in case that was what did it, but that did not seem to work.

Which brings up another question re what "Continued Motion" does.

Also, is there any manual/help document for this driver either on the internet, or in the software itself?

I looked on the forum and on the internet, and couldn't find any answers.

TIA.
 

https://forums.techguy.org/threads/scrolling-using-cypress-touchpad-when-fingers-reach-bottom-of-touchpad.1009078/
Relevancy 64.93%

I accidentally clicked on the clock icon, and my horizontal bottom toolbar went vertically to the right side. I've tried to realign it with Settings, to no avail. Help! (I have Windows 2000).
 

A:Getting toolbar from side to bottom

right click on it and make sure it's not locked then just moved your cursor to ablank spot on it and leftclick and hold...drag it towards the bottom

buck
 

https://forums.techguy.org/threads/getting-toolbar-from-side-to-bottom.300684/
Relevancy 64.93%

the taskbar of my computer has change from the bottom of the screen(the normal way) to the right side of the screen. how do i revert the changes.
 

A:taskbar is on the right side instead of bottom

Hi and welcome

Click a blank portion of the taskbar.
Hold down the primary mouse button, and then drag the mouse pointer to the place on the screen where you want the taskbar.
After you move the mouse pointer to the position on your screen where you want the taskbar, release the mouse button.
 

https://forums.techguy.org/threads/taskbar-is-on-the-right-side-instead-of-bottom.910025/
Relevancy 64.07%

Help my hp stream laptop control bar flipped to the side i tried ctrl alt and arrow keys but it dosent work

A:Help my bottom bar on my laptop fliped to the side and i can...

Hi, Right click an empty area of the Taskbar and select Properties. Next to the heading 'Taskbar location on screen', select Bottom the dropdown menu, then click Apply and Ok to save the change. Regards, DP-K

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Help-my-bottom-bar-on-my-laptop-fliped-to-the-side-and-i/td-p/5593973
Relevancy 64.07%

Hi,
 
I've had some ads popping on either sides of my web browser (chrome),
at first my reflex was to add the ads domains to my hosts file and point them to 127.0.0.1
but my hosts file is hidden and read only and I can't unhide it or clear the read only...
I've booted with unbuntu and opened the host file and I found that at the bottom of the file
these entries have been added :
 
 
74.55.76.230 www.google-analytics.com.
74.55.76.230 ad-emea.doubleclick.net.
74.55.76.230 www.statcounter.com.
178.250.45.15 www.google-analytics.com.
178.250.45.15 ad-emea.doubleclick.net.
178.250.45.15 www.statcounter.com.
 
Now, every time I edit the file it gets back to the same hidden and read only with those same entries,
 
I've run my virus scan (avg), I tried trend micro home call, adaware, spybot but nothing is detected.
 
Anyone can help me?

A:ads popping on either side on the bottom of chrome

Please download TDSSKiller from here and save it to your DesktopDoubleclick on TDSSKiller.exe to run the application, then click on Change parameters


Check Loaded Modules  and Detect TDLFS file system.  Do not check Verify file digital signatures (even though it is checked in the example)If you are asked to reboot because an "Extended Monitoring Driver is required" please click Reboot now


Click Start Scan and allow the scan process to run

If threats are detected select Skip for all of them unless I instruct you otherwiseClick Continue


Click Reboot computerPlease post the contents of  TDSSKiller.[Version]_[Date]_[Time]_log.txt found in your root directory (typically c:\)in your reply===================================================aswMBR--------------------Download aswMBR and save it to your desktop.
Please disable your real time protection of any Antivirus, Antispyware or Antimalware programs temporarily. They will interfere and may cause unexpected results.If you need help to disable your protection programs see here and here.Double click the aswMBR.exe file to run it. Please allow when you are asked to download AVAST antivirus engine defs.Wait until the AV update is done, then click on the Scan button to start. The program will launch a scan.

When done, you will see Scan finished successfully. Please click on Save log and save the file to your desktop.

Please post the contents of the log in your next reply.NOTE:  aswMBR will create MBR.dat file on your desktop. This is a copy of your MBR. Do NOT delete it.===================================================ESET Online Scanner--------------------I'd like us to scan your machine with ESET OnlineScan  This process may may take several hours, that is normalHold down Control and click on this link to open ESET OnlineScan in a new window.Click the   button.For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)

Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.Double click on the icon on your desktop.
Check "YES, I accept the Terms of Use."Click the Start button.Accept any security warnings from your browser.Under scan settings, check "Scan Archives" and "Remove found threats" Click Advanced settings and select the following:

Scan potentially unwanted applicationsScan for potentially unsafe applicationsEnable Anti-Stealth technologyESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some time.When the scan completes, click List ThreatsCopy and paste the information in your next reply.   Note:  If no malware was found you will not get a log.Click the Back button.Click the Finish button.===================================================Things I would like to see in your next reply. Please be sure to copy and paste the information rather than send an attachment. TDSSKiller logaswMBR logESET results 

http://www.bleepingcomputer.com/forums/t/487064/ads-popping-on-either-side-on-the-bottom-of-chrome/
Relevancy 64.07%

If you think putting the speakers on the bottom of the laptop is a good idea, maybe you should figure out a way to put the keyboard there as well so I CAN LISTEN TO WHATS PLAYING WHILE I TYPE!!!  Really, who's the genius engineer that thought that was  a good idea?

http://community.acer.com/t5/Legacy-Laptops-and-Netbooks/Speakers-on-the-bottom-side-of-a-laptop/td-p/449543
Relevancy 64.07%

Hi all, the bar on my wife's computer that usually is on the bottom (Start ..........running programs, time)
has moved to the left side of the monitor. How can I get it back to the bottom?
Thanks

A:Bar at bottom has moved to the left side

Click on it when the mouse and drag it down.

http://www.bleepingcomputer.com/forums/t/301975/bar-at-bottom-has-moved-to-the-left-side/
Relevancy 63.64%

Since yesterday I have been having this little box ad slide out from the bottom left side of my screen and the only time is doesn't come up is when I am on FaceBook.  I don't know where is came from and its getting to be really annoying.  I've scanned everything and can't seem to find anything.  I've gone in my installed programs and can't find anything out of the ordinary.  Please tell me what to do to get rid of this.  
 Capture.JPG   26.83KB
  8 downloads

A:Ads popping out of the bottom left side of screen

What antivirus are you currently using?

http://www.bleepingcomputer.com/forums/t/506184/ads-popping-out-of-the-bottom-left-side-of-screen/
Relevancy 63.64%

Help! The start button and stuff at the bottom of the screen is now on the right side of the screen. This happened once before but I can't remimber how I fixed it. I know it was something realy simple.

A:System Tray Not At The Bottom, But At The Side Of The Screen

Left click on the bar in an open area.
Drag it to where you want it
Then right click the Task bar and select "Lock the taskbar".

http://www.bleepingcomputer.com/forums/t/166262/system-tray-not-at-the-bottom-but-at-the-side-of-the-screen/
Relevancy 62.78%

Hi experts,
 
Since 2 days I am getting squared ads popups on all web sites (this one too...) on the left bottom side of my browser. I sometimes get another one in the bottom middle (rectangular).
 
- I am seeing them on almost all web sites
- I see them on all devices connected to my wifi network (ipad, 2 PCs, phone)
- I see them with IE and Chrome
- I tried many antivirus scans: nothing found
- This does not happen when I am connected to another wifi network, only mine
- I factory resetted my modem (Motorola SBG900)
- I don't have any suspect add-on or program installed 
 
Thank you for your help.
 

A:Ads popups on the left bottom side of any browser/any device

Shall I try to install a firewall on my PC to see where this comes from? Why all devices in my home network?
 
Any clue?
 
Thank you 

http://www.bleepingcomputer.com/forums/t/550035/ads-popups-on-the-left-bottom-side-of-any-browserany-device/
Relevancy 62.78%

How do I move the task bar from the side where it mysteriously wound up back to the bottom of the screen? Thanks.
 

A:start & task bar have been moved to the side of the screen instead of bottom.

When it pops up(if you choose to autohide), click an empty space on the taskbar and hold it down. Now, drag it around.
 

https://forums.techguy.org/threads/start-task-bar-have-been-moved-to-the-side-of-the-screen-instead-of-bottom.319364/
Relevancy 62.78%

i meant the task bar

it says to keep on the bottom

but is on the side taking up so much space i have to use the slider on the bottom of the page to see the right side of the page

how do i get it back to the bottom..??

A:the tool bar moved to the side, wont go back to the bottom

Assuming you meant the taskbar, first right click on the taskbar and make sure it is not locked. Second, *left* click on the taskbar, holding the button down, and drag it back to the bottom.

Finally, when it gets there let go of the button, and then right click it and lock it.

http://www.vistax64.com/general-discussion/159975-tool-bar-moved-side-wont-go-back-bottom.html
Relevancy 61.92%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, x86 Family 15 Model 35 Stepping 2
Processor Count: 2
RAM: 1918 Mb
Graphics Card: NVIDIA GeForce 6100, 512 Mb
Hard Drives: C: Total - 238472 MB, Free - 200309 MB;
Motherboard: , C51G+MCP51, , WY3J63103856
Antivirus: Bell Internet Security Services Anti-Virus, Updated: Yes, On-Demand Scanner: Enabled

What does this ! icon mean when it is the little box on the left hand side at the bottom of the screen when in IE 8.0? It says ERROR. Will someone answer this for me. Thank you so much for your help.
 

Relevancy 60.2%

Greetings, I've had an XPS 9550 since mid January.  Was an Apple guy for a decade but wanted to get into gaming.  While I'm having to get used to video_scheduler crashing my computer all the time and the audio jack isn't plug and play all the time, it's a good computer.
A month ago the touchpad started to rise so that I can now get a finder nails underneath and the bottom corners are no longer clicking.  I can still click near the white line so I'm guessing there is just dirt.  Is this a common problem?

http://en.community.dell.com/support-forums/laptop/f/3518/t/19991337
Relevancy 59.77%

I just bought an Envy m7-n109dx and fresh out of the box the touchpad seems to be depressed on the lower left. I would imagine this is supposed to be flush with the rest of the laptop? Can anyone please confirm this? I've already returned it once for this issue. They just swapped it out. Needing to know if I got another bad one or this is normal on this model. Thanks in advance! 











Solved!
View Solution.

A:Is touchpad supposed to be lower on bottom left? Not flush.

Hey @Wej1,My laptop has that same depression in the bottom left. Not sure if it's meant to be there for anything special, or if it's just part of the design however, you're not the only one as several of the laptops we have here also have a depression on the lower left of the touchpad. I am unsure why this is, but it seems to be consistent with most of them. Please keep me posted.  You can always say thanks by hitting the Thumbs Up button below!Cheers.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Is-touchpad-supposed-to-be-lower-on-bottom-left-Not-flush/td-p/5526924
Relevancy 55.04%

Anyone else with the XPS 15 9530 have the issue where the touchpad is not flush with the palmrest area?

A:XPS 15 (9530, Late 2013) - Touchpad Not Flush with Palmrest Area (raised about 1mm on the left side)

Sorry, should have reported problem fixed. The problem I had was the battery. It became puffing and pushed the touchpad up. I'd have the tech check that first.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19622921
Relevancy 55.04%

During certain times my Charms bar won't swipe via mouse, the left side's app viewer won't appear, and I cannot click on the start button. This happens frequently and I do not know what is going on.

A:Charms bar, start menu and left side app viewer not working properly

Hi,
Can you supply a bit more information about the hardware and softwaare?
Are you experiencing any other problems wit other features?
Keep us posted

http://www.bleepingcomputer.com/forums/t/546001/charms-bar-start-menu-and-left-side-app-viewer-not-working-properly/
Relevancy 55.04%

My touchpad is not working properly.I can drag my cursor using it but am unable to hold it or tap it to select something which causing several inconvenience.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Touchpad-not-working-properly/td-p/5663156
Relevancy 55.04%

OK so now if my touchpad is switched on the mouse cursor sometimes makes continuous erratic movements around the screen. Turning it off solves this problem. Is this a sign it's wearing out, or is there something I can do to stop this?

A:Touchpad not working properly

What state is your laptop on when the touchpad issue occurred? This happens on my fujitsu laptop when charger is plugged in. After a quick googling, found out that I just had to put the "brick" part of the charger to a good distance away from my laptop. Worked wonders! Issue usually happens with replacement chargers (due to voltage or ampere incompatibility).

Not sure though if this was your case.

http://www.tenforums.com/drivers-hardware/42868-touchpad-not-working-properly.html
Relevancy 55.04%

i am using hp ay008tx and have installed latest driver as recomended on hp website of SYNAPTIC TOUCHPADV1.3.. sometimes i have to click twice ot thrice to get one click.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/touchpad-not-working-properly/td-p/5822977
Relevancy 55.04%

My hp touchpad isn't working properly. It stops after sometime and windows 8.1 is working really slow. Kindly fix this issue as soon as possible. I shall be highly grateful to you.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/My-hp-touchpad-isn-t-working-properly/td-p/5638583
Relevancy 55.04%

Hi i have hp i7 4712 laptop.but its touch pad is not working properly.Because when i using it some its stop for few minute and then it start working.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Touchpad-is-not-working-properly/td-p/5615965
Relevancy 55.04%

No idea if this is hardware or software, but I'm trying this first.

I have an Inspiron 1525 laptop running Vista. My touchpad stopped working for some random reason a couple days ago except for the buttons. It might have started working again a while ago, but I just noticed 2 hours or so again that it was working, except for 2 things: I can't do that... uhhh... dunno what it's called, where you click the two buttons together and it does what clicking the mouse wheel on a normal mouse would do... and I can't scroll. The thing on my taskbar that tells me where my finger is on the touchpad has disappeared, as well.
 

A:Touchpad not working properly

Touchpads are usually proprietary pieces of hardware that have drivers supplied by the manufacturers. Check your device manager and settings in Control Panel (it may be under the Mouse settings) to be sure everything is all right there.

You might also go to the manufacturer's web site to check on a driver, and maybe an update to it. You could always reinstall it, anyway.
 

https://forums.techguy.org/threads/touchpad-not-working-properly.851233/
Relevancy 54.61%

I am running Vista on a Dell Inspiron 531 and the mouse is not alligned corrently... I find this hard to explain - basically I have to put the mouse above and to the left of the button I want to click rather than on top of the button. I have tried different mice to no avail.

I attatch a picture of what i'm talking about incase i'm not making this clear.

Any help would be much appreciated, thanks.
 

A:Mouse not alligned ?

The two things that control your cursor are the video card drivers, and the mouse pointer (not Windows or the mouse drivers).

Try either updating your video card drivers, or changing your mouse cursor.

Courtney
 

https://forums.techguy.org/threads/mouse-not-alligned.682347/
Relevancy 54.18%

My laptop touchpad is not working properly; that is I cannot scroll properly and also have problems with the sensitivity of touch. I downloaded and installed the Synaptic touchpad driver but it is still not functioning very well. Please can someone help me with a solution.
The name of my Laptop is; Compac Presario CQ50-115NR Notebook PC
Thank you.
 

A:My laptop touchpad is not working properly

Go to Start -> control panel -> Hardware and Sound.

Somewhere in there you should find adjustments for the sensitivity.

If this does not work please state your operating system for further help and try it with a USB mouse.
 

http://www.techspot.com/community/topics/my-laptop-touchpad-is-not-working-properly.163990/
Relevancy 54.18%

Brand new chromebook and the touchpad lags, or does't respond correctly (scrolling when it shouldn't, clicking the wrong area, etc.)  Is there somethig I can do to fix this?

A:chromebook CB5-311 touchpad not working properly

Factory resethttps://acer.custhelp.com/app/answers/detail/a_id/11188/~/how-do-i-recover-my-acer-chromebook%3F Replace the Chrome O/S recovery drivehttps://acer--uk.custhelp.com/app/answers/detail/a_id/27636/~/how-to-create-recovery-media-for-a-chr...

http://community.acer.com/t5/Chromebooks/chromebook-CB5-311-touchpad-not-working-properly/td-p/395936/jump-to/first-unread-message
Relevancy 54.18%

I have a HP Pavilion DM4-3099se Laptop with a Intel Core i5 dual core processer and 6GB of RAM. On this laptop is a Synaptics touchpad and uptill now it was working fine. It recently started glitching and now when i move my finger on the touchpad, the mouse moves but it repeatedly stops and then starts moving and then moves in all different directions. I went to the Synaptics website and installed the latest drivers for the touchpad and the installation was successful but the trackpad was still the same way. My external wired mouse works fine right now though. I tried restoring my system the earliest point there was on the list and still no improvement on the touchpad. Please help. Thank you.

A:SYNAPTICS TOUCHPAD NOT WORKING PROPERLY!

Thanks everyone for reading but I already fixed the problem. My computer shipped with two Operating Systems, one being windows 7 and the other being HP QuickWeb. I just booted into HP Quickweb and my trackpad was working fine and then i booted back into windows and it worked perfectly after that. I just though i would let you know and can somebody please close this topic because i dont know how to. thanks.

http://www.bleepingcomputer.com/forums/t/485995/synaptics-touchpad-not-working-properly/
Relevancy 54.18%

1. when i start my laptop, touchpad works fine but after a while it starts missbehaving. right click n left click work fine but cursor is out of control.i have checked if its driver is not updated but it is updated.i uninstalled its driver n installed it back but even then it is not working. i read somehwere if its touch screen is turned off then touchpad works fine but even if i turn touch screen off it does not work.2.i dont know about other function keys but i use function keys for brightness and volume all the time. i dont know if it was last window update or what else went wrong that these function keys are not helping anymore. These keys still make a pop up sound which means keyboard buttons are working fine.please help.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/1-touchpad-not-working-properly-2-function-key-does-not-work/td-p/5723984
Relevancy 54.18%

Hello hi im lili b any my toupad isnt working right the dang strolling up or down wont work and I cant fix it I have an hp pavilion dv4 1435dx could someone help mi find the orrect driver that could fix it
 

A:Laptop touchpad is not working properly

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3979336&lc=en&cc=us&dlc=en&lang=en&cc=us

You should find the drivers you need here. Click on next By the windows 7 64 bit box.
 

http://www.techspot.com/community/topics/laptop-touchpad-is-not-working-properly.194368/
Relevancy 54.18%

My scrolling up and down option of touch pad is not working what should I do...?
 

A:My laptop touchpad is not working properly

Are you referring to the the right side scroll bars on laptop touch pads that allow you to scroll up and down pages?

Try updating the driver for your touchpad and see if that helps.
 

http://www.techspot.com/community/topics/my-laptop-touchpad-is-not-working-properly.201621/
Relevancy 54.18%

I bought a Lenovo G50-80 (intel(R) Core i3-5005U, 2GHz) a few months ago. A week after buying, I noticed touchpad not working properly while charger plugged in, also it was not working while my printer?s USB cable connected. Touchpad button and finger tap working fine but, cursor hanging or moves very slow. When I unplugged the charger and printer cable touchpad working fine. But, it was not working anymore (it is also not working properly when the charger and printer?s USB cable unplugged). Usb mouse working perfect.My Laptop have installed windows 7 64bit operating system. I tried to reinstall windows 7 64bit ultimate and professional os (Not other like windows 8 or 10), I updated a latest bios and touchpad driver from Lenovo and synaptics website, But I am getting same problem.

A:Lenovo G50-80 touchpad not working properly when t...

Hi there, Nmparmar          -
 
Thank you for writing in to the Lenovo Forum - happy to have you here today.
 
Can you try to:
Make sure you use the original 65W 20V/3.25A or 90W 20V4.5A AC adapter that came with the unit.
 
Plug the AC adapter in another wall outlet in your house (preferrably another side of the house) - if this works, the original wall outlet that you used before when you got the issue may not be properly grounded.
 
Perform a power drain by:a turning the PC OFF. Remove the battery & AC adapter then hold the power button for 30secs. When done, reinsert the AC adapter and battery then boot into the BIOS by pressing F2. When inside the BIOS, press F9 to reset default settings and press F10 to save and exit.
 
Update the Touchpad Driver below:
 
Synaptics Touchpad Driver      
 
Update us how it goes.
 
 
 
 
Regards,
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-G50-80-touchpad-not-working-properly-when-the-charger-or/td-p/3438701
Relevancy 54.18%

I upgraded windows 10 about 2 days ago and from that my elan touchpad starts to not working after some minutes of usage, it always detects an unexisting tap.
I tried to uninstall and reinstall the driver but it seems to not working.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:G50-80 - Elan touchpad not working properly after ...

Good day and welcome to the community.Please provide more information about your system model, otherwise it may be difficult for the community to assist you. We will also be able to confirm that your post is in the proper forum.Regards.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/G50-80-Elan-touchpad-not-working-properly-after-win10-upgrade/td-p/3393903
Relevancy 54.18%

Hi I have a Samsung RV laptop and I have a problem with the elan touchpad It can scroll up and down but I touchpad working Elan not properly when I click or tap on anything it doesn t do anything I am using a USB plug in mouse but I am working on an university assignment and I need the USB portal to save my work on an USB key Elan touchpad not working properly Before Christmas I had the same problem and I went into the tech support in uni and he said that I had set the left click button to right click function or something like that and he went into control panel and mouse to resolve the problem He fixed it by doing something in Mouse under Control Panel but I just can t remember what and by the way I have the setting where the elan touchpad is disabled when an USB plug in mouse is inserted I really need help today if you can I have tried to adjust the settings of the touchpad in Mouse in Control Panel but even switching the buttons does not do anything to solve the problem Sometimes when I start the laptop the touchpad works fine but an indication that is going wrong is when I am scrolling the screen with the touchpad the pop up that appears on screen when one right click appears by itself and keeps appearing whenever on the screen I move the touchpad mouse After that the tap to click as well as left and right click buttons fail to work at all and I do not know if this is a software problem or is it a hardware problem as I said I encountered this problem already and now it s returned Thanks nbsp

https://forums.techguy.org/threads/elan-touchpad-not-working-properly.1117590/
Relevancy 53.75%

It seems that Alps Touchpad isn't fully compatible with Windows 10 given that it couldn't scroll properly on MS Edge. The mouse can scroll, but it scrolls like a snail, like I'm scrolling a backgound application. Indeed, it seems that the touchpad sees MS Edge a background app even though it is in the foreground because if I put Edge as actually a background app and another program (e.g. video player) in the foreground, MS Edge scrolls well without any issue. It seems that Alps sees MS applications as this: foreground app is background app; background app is a foreground app. I hope HP or Alps will provide an updated driver.

A:ALPS Touchpad Not Scrolling Properly on MS Edge

Hi, Please use the following link to download and install to your computer.            http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_140673_1 Regards.

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/ALPS-Touchpad-Not-Scrolling-Properly-on-MS-Edge/td-p/5722875
Relevancy 53.75%

I have Lenovo G50-80 (80E5) Laptop with Intel® Core? i3-5005U Processor (2.00 GHz) Processer,My laptop Have 4 GB Ram and 1 TB Hard disk (Windows 7 32bit OS).My Laptop touchpad work fine when used on the bettery, but when i plugged in charger touchpad was not working properly and mouse working perfect, when i unplug my charger mouse and touchpad work proprely. I trid to reinstall touchpad driver many time from Lenovo and synptics website but problem was not solvedi have no other power supply to try.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/G50-80-Laptop-touchpad-doesn-t-work-properly-while-charging/td-p/3395981
Relevancy 53.75%

I love my Satellite T110-107 but there are issues with the TouchPad.

1). The mouse cursor doesn't move at times. With this one I can get it to move by taking both hands away from the laptop for a moment.
2). The mouse cursor suddenly 'shoots' off to the right hand of the screen.

I've tried changing the touchpad sensitivity to both the minimum and the maximum levels, i've adjusted the 'Palm' sensitivity but nothing seems to help other than by making the sensitivity low which helps a little.

I've also noticed that when the laptop is on my lap, the problem is worse than if it's on a table.

I think that it's a problem with a build up of static on the case.

Any other ideas?.

A:Satellite T110-107 - Touchpad not working properly

Hi buddy,

I use Satellite T110 for months now and really and no problem. Everything runs great and I don?t have any problems. It?s really great notebook!!!

So it must be something wrong with yours or installation.
First of all I would recommend updating the touchpad driver. You can download it on the Toshiba website:
http://eu.computers.toshiba-europe.com

After this you should test it again. Check also the touchpad settings again. There are a lot of settings to improve touchpad.

https://forum.toshiba.eu/showthread.php?55571-Satellite-T110-107-Touchpad-not-working-properly
Relevancy 53.75%

I just reformatted the HDD on my girlfriends laptop and now the touchpad mouse is not working properly. The scroll wheel doesn't work and when scrolling down on a web page with the keyboard it goes step by step. Are their any settings that I need tochange to make it work right?
 

A:Laptop touchpad mouse is not working properly

Some touchpads require specific drivers installed. Did you install these from the manufacturer? This is the integrated one on the laptop not add-in devices?
 

https://forums.techguy.org/threads/laptop-touchpad-mouse-is-not-working-properly.421227/
Relevancy 53.75%

Hi, I have a strange problem with my inspiron Inspiron 15 (N5050). When I plugged in the AC charger, the touchpad / mouse does not work properly. Sometimes it moves and sometimes not eventhough I have moved and touched the touchpad. When I disconnect the AC charger, the touchpad works perfectly fine. Can anyone give me advise on this? thanks in advance

A:My mouse/touchpad is not working properly while charging

Hi suneel_zee.
Welcome to the Community,
Have you tried different power outlets? Does this happen in different locations(even outside you house/work)?
I would suggest you to release flea power.To release flea power disconnect AC adapter,remove battery,disconnect all external peripherals(USB devices),press and hold power button for 30 seconds.
Reconnect the battery and AC adapter.Check how touchpad responds with AC Adapter connected.
If the issue persists try a different AC adapter(may be borrow from some one who uses same watt Dell AC adapter).
Let me know how it goes.
Thank You

http://en.community.dell.com/support-forums/laptop/f/3518/t/19481178
Relevancy 53.75%

I upgraded windows 10 about 2 days ago and from that my elan touchpad starts to not working after some minutes of usage, it always detects an unexisting tap.I tried to uninstall and reinstall the driver but it seems to not working.

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Elan-touchpad-not-working-properly-after-win10-upgrade/td-p/3393903
Relevancy 53.32%

I want the StartButton to be at the bottom of my taskbar when I have it placed vertically. I have it on the left side currently.

I've decided to this because with widescreen displays becoming prominent, we have unused horizontal space when doing common tasks such as internet browsing and word processing. (I'm on a laptop with a somewhat limited screen.)

I've searched all over the interwebz and I haven't seen anything.

A:Taskbar Alligned Vertically Tweak?

I know they have this for multiple monitors, but don't know about a single one. You may have to research for yourself, but note that most programs charge, as does this one: MultiMon. I doubt it will do what you want it to, though.

Just use the internet full screen if feel you are wasting space. I buy bigger monitors so I don't get a cluttered feeling. If you want less wasted space, buy a smaller monitor. You cannot have the start button separate from the taskbar, they are connected.

http://www.sevenforums.com/customization/132268-taskbar-alligned-vertically-tweak.html
Relevancy 53.32%

I recently upgraded my computer from Windows 8.1 to Windows 10 and have noticed some issues:

Whenever I stop moving the mouse, the little blue loading circle keeps blinking. Now I don't exactly if it's causing any problems but I'm sure it wasn't doing that before I upgraded and I think it may be related to this second issue:

My touchpad no longer scrolls with two fingers. Now it only scrolls via touching the right side of the pad and dragging my finger up or down. No two finger gestures work anymore.
There seems to be a new driver called Elantech and I've found a settings menu for it but the gesture controls say they're turned on even though they don't work.

Has anyone had a problem like this?

I have an MSI GT 60
i7 Windows 10

A:Blinking Loading Circle and Touchpad Not Scrolling Properly

MSI GS70 2OD here. Same issue.
Windows 10.0.10586

http://www.tenforums.com/performance-maintenance/38415-blinking-loading-circle-touchpad-not-scrolling-properly.html
Relevancy 53.32%

Hi nbsp I got my nbsp HP ENVY t-q CTO Notebook PC in September It has Windows -bit For the first few weeks of use I did not have any issues Then I started having more occurences of cursor touchpad issues to the point where it happens every hour of use not an external mouse issue nbsp Jumps around on screen a few millimeters to inches nbsp Move incrementally on its own without me anywhere near the laptop generally spazzes to the left nbsp Not allow scrolling normal touchpad functions when issues are occuring nbsp Functions as if I am holding down the click button while I try to move it - most sporadic, not ... jumping, and touchpad working properly Cursor frustrating part when I am doing important work nbsp Randomly click stuff as I attempt to move it nbsp nbsp Here is what Cursor jumping, sporadic, and touchpad not working properly ... I have tried to do Cursor jumping, sporadic, and touchpad not working properly ... to fix it and has not worked Roll back driver didn't work nbsp Update driver no updates available nbsp Reset device works for a minute or so nbsp Restart I do this daily anyway nbsp Reduce cursor speed and other mouse options suggested online nbsp nbsp nbsp I have seen similar issues for the HP Envy and other notebooks but no actual fixes have been proposed Please help me with this issue nbsp

A:Cursor jumping, sporadic, and touchpad not working properly ...

Hi Please find the link given below might help you to fix your issue. In case you have already tried the steps let me know. Link Try updating the Bios then update the update the driver. Try performing a system restore to the date where unit was working fine.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Cursor-jumping-sporadic-and-touchpad-not-working-properly/td-p/4666130
Relevancy 53.32%

Hi,

On windows 7 the touchad isn't working properly meaning that I can't scroll on pages by sliding my finger at the edges of the touchpad. It worked perfectly witn Vista and now it's not. I have 64bit version.

I searched for new drivers but there aren't any. How should I resolve this?

Thanks,

A:Portege M800 - Touchpad not working properly on Windows 7

What Model do you have exactly?

PPMxxx-xxxxxx?

https://forum.toshiba.eu/showthread.php?55714-Portege-M800-Touchpad-not-working-properly-on-Windows-7
Relevancy 53.32%

I have Lenovo G50-80 (80E5) Laptop with Intel® Core? i3-5005U Processor (2.00 GHz) Processer,My laptop Have 4 GB Ram and 1 TB Hard disk (Windows 7 32bit OS).My Laptop touchpad work fine when used on the bettery, but when i plugged in charger touchpad was not working properly and mouse working perfect, when i unplug my charger mouse and touchpad work proprely. I trid to reinstall touchpad driver many time from Lenovo and synptics website but problem was not solvedi have no other power supply to try.

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Laptop-touchpad-doesn-t-work-properly-while-charging/td-p/3395981
Relevancy 53.32%

Hi I m a first-time user and happy to have found your website My operating Working Touchpad 7520 Not Inspiron Properly Dell system is Windows I am using a wireless Logitech Mouse uses USB hardware I Dell Inspiron 7520 Touchpad Not Working Properly have had this laptop for years PROBLEMS The touchpad will not turn off Under Dell Inspiron 7520 Touchpad Not Working Properly quot Mouse quot on the Control Panel functions for the Dell Touchpad should allow me to simply turn the touchpad on and off Regardless whether it is Dell Inspiron 7520 Touchpad Not Working Properly in the on or off position it is still on Even when I don t touch the touchpad the cursor skips around the screen highlights text and deletes text Typed text re-locates within earlier typed text There is an on off light at the top of the touchpad that indicates the touchpad is on off This is not working Also this panel item allows me to manage sensitivity buttons gestures amp edge scroll amp zoom I can work these but the Edge Scroll amp Zoom buttons do not see to change the settings WHAT I HAVE DONE TO ATTEMPT RESOLUTION I have checked the drivers for both the touchpad and mouse and I get messages that they are each up to date Because the touchpad will not turn off I have tried to manage the buttons to turn down the sensitivity to minimize movement of text This does not help Turning on Disable Touchpad amp Point Stick when USB Mouse present does not disable the touchpad nbsp

https://forums.techguy.org/threads/dell-inspiron-7520-touchpad-not-working-properly.1165207/
Relevancy 52.46%

I have recently come across a very strange problem when trying to draw in Corel Painter 6 with my Wacom Intuos 9x12 tablet. When I press down with the pen tip, on the drawing surface, and draw, the line i draw is about 10 inches to the left of where the mouse pointer is, and about three inches above. This only happens when I use my tablet- the mouse draws properly, and this only happens in Painter. I have no issues with the tablet in any other software. Also, this is a recent problem. Thanks for any suggestions.
 

http://www.techspot.com/community/topics/wacom-tablet-not-alligned-when-using-corel-painter-6.126354/
Relevancy 52.46%

Hi guys and Circle Loading Flashing Not Touchpad Working Elantech Properly I Elantech Touchpad Not Working Properly and Flashing Loading Circle hope someone can help me with this Elantech Touchpad Not Working Properly and Flashing Loading Circle So I recently upgraded from Windows to Windows and I noticed a few issues with the touchpad on my laptop two finger scrolling no longer works Now I have to drag one finger on the right edge of the touchpad up and down in order to scroll vertically I've also noticed the blue loading circle beside the pointer keeps flashing roughly once per second whenever i leave it alone even if I am not running any programs I can leave it on the desktop and the blue circle still keeps flashing It appears Win installed a new driver called ELAN Input Device That's what it says when I go to the device manager However when I go to the settings menu gt devices gt mouse and touchpad gt additional mouse options to the mouse properties there is no way to configure the gestures I found out that I have to go to the Elantech folder in program files and run the ETDAniConf application and that brings up the gesture customization menu However when I run the program the option for two finger scrolling pinch zoom etc are checked on as is the default There is no option for one finger right side scrolling like I mentioned earlier And as I said the blue circle keeps flashing when idle My laptop is a MSI GT running Windows upgraded from which was updated from Any help would be greatly appreciated To sum up ELAN is messing up my touchpad and the pointer loading circle keeps flashing when idle Thanks for reading

http://www.techsupportforum.com/forums/f338/elantech-touchpad-not-working-properly-and-flashing-loading-circle-1081937.html
Relevancy 52.46%

I recently updatet my Laptop (Z930-12m) to windows 10, everything is working fine so far, except the Touchpad (Synaptics).
I can't scroll any more and also the momentum setting I used before seems not to be working any longer.

So I ask myself are there any updates for the drivers planed for this? Or can I get them anywhere else?

A:Portege Z930-12M - Touchpad is not working properly after Windows 10 update

Update:
The scrolling on the touchpad works now, I just did not adjust the settings properly.
But the momentum still does not work.
Anyhow, I found a view drivers for my laptop
http://win10upgrade.toshiba.com/swup...=DE&country=AT

https://forum.toshiba.eu/showthread.php?84069-Portege-Z930-12M-Touchpad-is-not-working-properly-after-Windows-10-update
Relevancy 48.59%

On my taskbar, when I open a document, it now shows on the bottom right of the taskbar instead of the bottom left. How can I get the documents back to the bottom left of the taskbar?

A:Documents show on bottom right of screen instead of bottom left

Microsoft has a "Fix it for me" feature that might help. Might be worth a try.How to move the Windows Taskbar from its default position or reset it to its default position

http://www.bleepingcomputer.com/forums/t/323771/documents-show-on-bottom-right-of-screen-instead-of-bottom-left/
Relevancy 46.44%

So recently I received a blue screen of death The error was something along the after - File Check configuration application incorrect System Side-by-side errors lines of page fault in nonpaged area When it restarted windows advised me to perform a system file check So I left my computer for a bit and when I came back it was already at the logon screen However when I logged on and started firefox first thing I noticed was that all my bookmarks and some extensions had been wiped I then tried to start Microsoft Word but I received the following error amp quot The application has failed to start because its side-by-side configuration is incorrect amp quot I receive that error for most of my other programs When I tried to run event viewer it says amp quot MMC could not create the snap-in amp quot Please help Is it possible to restore my applications without reinstalling them all Sysinfo Log Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium Service Pack bit Processor Intel R Core TM Duo CPU P GHz x Family Model Stepping Processor Count RAM Mb Graphics Card ATI Mobility Radeon HD Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB Motherboard Dell Inc F N A WZ S CN K Antivirus Microsoft Security Essentials Updated and Enabled EDIT I ran SCF again It said it detected corrupted files but when I restarted my computer I am still unable to run most of my applications Itunes also requires me to reinstall Latest Minidump also attached nbsp

A:Side-by-side configuration incorrect - application errors after System File Check

https://forums.techguy.org/threads/side-by-side-configuration-incorrect-application-errors-after-system-file-check.1003342/
Relevancy 46.44%

G'day everyone - I suspect this issue will be a tough one to get help with!

I've attached a screen-capture of a Microsoft Office Excel 2007 spreadsheet I'm working on at the moment. As you will be able to see on the screen-capture, I've marked the areas of interest and will explain here...

When I enter a name in this column (marked as '1'), I want the spreadsheet to check another column (marked as '2') to see if there is a match. If there is a match, I then want the spreadsheet to check the column marked as '3', and subtract that amount from the column marked as '4'. If there is no match between the column marked as '1' and the column marked as '2', I don't want anything to happen.

I hope that made sense, and if anyone can help me with a solution here, I would greatly appreciate it.
 

A:Solved: Calculating Side-By-Side Cells Dependant On Text Entries In Excel

https://forums.techguy.org/threads/solved-calculating-side-by-side-cells-dependant-on-text-entries-in-excel.833879/
Relevancy 46.44%

When I'm reading a message I have to scroll right to see the rest of the sentence. Is there a way to show the entire message in one window?

Thanks
 

A:Solved: Remove necessity to scroll side to side in order to read text.

https://forums.techguy.org/threads/solved-remove-necessity-to-scroll-side-to-side-in-order-to-read-text.546692/
Relevancy 46.44%

I have a spreadsheet that has nine columns. Once of these columns (the fourth column) is used for a single character as a method of immediately letting the user know that the row in particular is different to the others. So, there's nothing different about that at all.

What I'd like to be able to do, though, is to have the other eight columns (the three columns before the column mentioned above and the five after) all change their background colour when the single character is entered in the fourth column.

So, if the user inputs data in a new row and leaves the fourth column cell blank, nothing happens. If the user enters the symbol (let's say it's a "#"), then the nine columns will all change their background colour to red.

If anyone can help me with this, I'd greatly appreciate it.
 

A:Solved: Formatting Side-By-Side Cells Dependant On Single Cell Value?

https://forums.techguy.org/threads/solved-formatting-side-by-side-cells-dependant-on-single-cell-value.877970/
Relevancy 46.44%

I have an Inspiron 5545 running win10.
On opening, the right side hinge on the keyboard section pulled three screws and inserts free, cracked the plastic in the corner where the hinge is located, killed the WiFi, and caused an intermittent vertical line to appear on the screen.
The laptop has never been out of  the house, never dropped, and seldom left my lap when I was home.
It runs, but is held together with aa 1.5" black paper clamp and connects to the home network via a USB WiFi dongle from Wal-Mart..
This is my fourth or fifth laptop and the first to have the case fail.  This is a design failure in my opinion.  Boo on you, Dell.  I've bought a lot of your computers over the years because they worked and did not fall apart with normal use.  This one disappoints.
Rev. William J McVay, D.D.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19981821
Relevancy 46.44%

i cant open my windows live movie maker due to Side by Side configuration error. Can anyone help me?

A:Windows Live movie Maker Side by Side configuration error

Isn't that a Win 7 app?

http://www.vistax64.com/software/297074-windows-live-movie-maker-side-side-configuration-error.html
Relevancy 46.44%

all instructions can be found here at
http://www.howtogeek.com/howto/17342/upgrade-office-2003-to-2010-on-xp-or-run-them-side-by-side/

 

https://forums.techguy.org/threads/upgrade-office-2003-to-2010-on-windows-xpor-run-them-side-by-side.1007320/
Relevancy 46.44%

First post I am coming to you as a last side work by programs Vista x64: :( halp no configuration error, Side resort I built my own PC and installed Vista Ultimate bit OEM edition Has been working fine for years Now every time I attempt to open a program I get the error quot The application has failed to start because its side-by-side configuration is incorrect Please see the application event log for more detail quot The only progam that is barely working is IE bit edition Vista x64: Side by side configuration error, no programs work halp :( I cannot download or run any files Microsoft wants to speak to a technical support representative What a joke multibillion dollar company wants extra for tech support Doing a ton of research I have tried various things to remedy this with no avail System restore did not work Doing a sfc scannow in command prompt does not work it does not even run Wasted hours of my life doing a thorough checkdisk as well The error in the event log is as follows Error in manifest or policy file quot C Windows WinSxS manifests x microsoft windows c -controls resources b ccf df en-us e f f dfabb manifest quot on line Invalid Xml syntax So the problem has to do with this manifest file I really am clueless as to my next move I can not download and run anything at all Can I do a Vista repair installation with my OEM version Should I try and get my hands on a cheap upgrade version of Windows

A:Vista x64: Side by side configuration error, no programs work halp :(

Welcome
Until our Forum expert in this area, Niemiro, comes on line, maybe this will give you a lead.
side by side configuration

http://www.vistax64.com/general-discussion/287781-vista-x64-side-side-configuration-error-no-programs-work-halp.html
Relevancy 46.44%

So I had the same problem as above I had developed a dll using Qt that worked fine on my machine but would not register on another The failed Solved: as configuration has side application to incorrect side start is by familiar quot This application Solved: application has failed to start as side by side configuration is incorrect has failed to start because the application configuration is incorrect quot appears when I ran the depencency walker on the dll So this was the solution that worked for me which may help some others see what s going wrong here Within my dll the manifest emedded read lt xml version quot quot encoding quot UTF- quot standalone quot yes quot gt lt assembly xmlns quot urn schemas-microsoft-com asm v quot manifestVersion quot quot gt lt dependency gt lt dependentAssembly gt lt assemblyIdentity type quot win quot name quot Microsoft VC DebugCRT quot version quot quot processorArchitecture quot x quot publicKeyToken quot fc b b a e e b quot gt lt assemblyIdentity gt lt dependentAssembly gt lt dependency gt lt assembly gt It seemed that the assembly definition was not found upon my client computer So then from within my original computer s Windows WinSxS directory I copied the x Microsoft VC DebugCRT f directory and it s associated files within the Policies and Manifests directories onto the client computer Once copied the dll registrered fine Hope this helps nbsp

A:Solved: application has failed to start as side by side configuration is incorrect

As above where?
 

https://forums.techguy.org/threads/solved-application-has-failed-to-start-as-side-by-side-configuration-is-incorrect.758168/
Relevancy 46.44%

Hi all I wounder if some can help me please I have an error and stopping all fucctions Side 32bit by many apps side error window's message coming up on Side by side error stopping all 32bit apps and many window's fucctions all bit application that says the application has failed to start because its side-by-side configuration is incorrect I have done a lot of searching and found that most Side by side error stopping all 32bit apps and many window's fucctions say I have to uninstall Visual C then load an update from Microsoft That s great but the side by side error won t let me uninstall or install anything I ran sfc scannow and it found some error and did not fix others The log is below I hope Side by side error stopping all 32bit apps and many window's fucctions someone can help Code CBS log - - Info CBS Starting TrustedInstaller initialization - - Info CBS Loaded Servicing Stack v with Core C Windows winsxs amd microsoft-windows-servicingstack bf ad e none ce c de cb f cbscore dll - - Info CSI WcpInitialize wcp dll version called stack x fee ef ad x fee a x fee e xff e c xff d xff db f - - Info CSI WcpInitialize wcp dll version called stack x fee ef ad x fee f x fee c aac x fee b xff e c xff d - - Info CSI WcpInitialize wcp dll version called stack x fee ef ad x fef x fef xff e xff d de xff db f - - Info CBS Ending TrustedInstaller initialization - - Info CBS Starting the TrustedInstaller main loop - - Info CBS TrustedInstaller service starts successfully - - Info CBS SQM Initializing online with Windows opt-in False - - Info CBS SQM Cleaning up report files older than days - - Info CBS SQM Requesting upload of all unsent reports - - Info CBS SQM Failed to start upload with file pattern C Windows servicing sqm std sqm flags x HRESULT x - E FAIL - - Info CBS SQM Failed to start standard sample upload HRESULT x - E FAIL - - Info CBS SQM Queued file s for upload with pattern C Windows servicing sqm all sqm flags x - - Info CBS SQM Warning Failed to upload all unsent reports HRESULT x - E FAIL - - Info CBS No startup processing required TrustedInstaller service was not set as autostart or else a reboot is still pending - - Info CBS NonStart Checking to ensure startup processing was not required - - Info CSI IAdvancedInstallerAwareStore ResolvePendingTransactions call flags progress NULL phase pdwDisposition x fc - - Info CSI Creating NT transaction seq objectname quot null quot - - Info CSI Created NT transaction seq result x handle x - - Info CSI CSI perf trace CSIPERF TXCOMMIT - - Info CBS NonStart Success startup processing not required as expected - - Info CBS Startup processing thread terminated normally - - Info CSI CSI Store x b initialized - - Error CSI F Invalid attribute name found l quot ProcessorArchiteature quot gle x - - Error CSI a F d win sp gdr base wcp identity id baseidentity cpp Error STATUS SXS INVALID IDENTITY ATTRIBUTE NAME originated in function Windows Identity Rtl Implementation CRtlIdentityBase CRtlIdentityBase Initialize expression pBAI gle x - - Error CSI b F STATUS SXS INVALID IDENTITY ATTRIBUTE NAME from Windows Identity Rtl Implementation CRtlIdentityAuthority IRtlIdentityAuthority Parse flags string l quot e ec bc cd ed bbb dd Culture neutral Version PublicKeyToken bf ad e ProcessorArchiteature amd versionScope NonSxS quot gle xd - - Error CSI c F HRESULT FROM WIN from Windows ServicingAPI CEnumCSI COMPONENT IEnumCSI COMPONENT Next gle x b - - Info CSI d SR Verifying x components - - Info CSI e SR Beginning Verify and Repair transaction - - Info CBS Archived backup log C Windows Logs CBS CbsPersist cab - - Info CSI f Repair results created POQ starts POQ ends - - Info CSI SR Verify complete - - Info CSI SR Verifying x components - - Info CSI SR Beginning Verify and Repair transaction - - Info CSI Manifest hash for component ml l quot amd b f cc ad c f b ba b bf ad e none c da b b quot does not match expected value Expected l b ef fbb abadf d a e d d ad b a cb cfe cf ed d Found l b ef fbb abadf d ... Read more

A:Side by side error stopping all 32bit apps and many window's fucctions

Hi scott and Welcome to Seven Forums.

Did you try to boot into safe mode? Or even better a system restore?

http://www.sevenforums.com/general-discussion/284074-side-side-error-stopping-all-32bit-apps-many-windows-fucctions.html
Relevancy 46.44%

Problem I m trying to retrieve a problem from sub server-side client-side Solved: variable setting client-side lt form gt element value into a server-side variable The code works if I explicitly set strCCLastNameValue a data value in the db table column quot care Contact Last Name quot such as quot Jones quot I hope I have explained the situation adequately Thanks for any suggestions on resolving this issue Here s the code Solved: problem setting server-side variable from client-side sub in an asp file lt script language quot Solved: problem setting server-side variable from client-side sub VBScript quot gt Sub Solved: problem setting server-side variable from client-side sub prepop lt Dim dbConn oRS sSQL strCCLastNameValue strCCLastNameValue document getElementById quot careContactLastName quot value THIS IS THE LINE THAT IS GIVING ME PROBLEMS Set dbConn Server CreateObject quot ADODB Connection quot dbConn Open quot Provider SQLOLEDB Server MYServerurl Database wpgXXXXX NetworkLibrary DBMSSOCN UID XXXXX PWD YYYYYYYY quot Set oRS Server CreateObject quot ADODB Recordset quot oRS CursorLocation adUseClient With oRS ActiveConnection dbConn Source quot SELECT FROM CareMinistry WHERE care Contact Last Name quot amp strCCLastNameValue amp quot quot CursorType LockType CursorLocation Open End With oRS MoveFirst gt Then fill the lt form gt with the selected row document addform entryStatus value quot lt oRS quot entry Status quot gt quot document addform entryCategory value quot lt oRS quot entry Category quot gt quot document addform entryDate value quot lt oRS quot entry Date quot gt quot document addform entryTime value quot lt oRS quot entry Time quot gt quot document addform careContactLastName value quot lt oRS quot care Contact Last Name quot gt quot and more fields to fill lt Close objects gt End Sub In the asp file which invokes the above sub on a quot onclick quot event of the following lt input gt the Form is as follows lt form name quot addform quot method quot POST quot action quot https toMyWebserver CBC-CareMinistry RELM do DB listings secure asp quot gt lt Table cellspacing quot quot cellpadding quot quot bgcolor quot ffffff quot width quot quot BORDER quot quot gt lt tr gt lt td width quot quot height quot quot align quot right quot bgcolor quot FFFFCC quot gt Search on Last Name lt td gt lt td height quot quot bgcolor quot FFFFCC quot gt lt input type quot text quot name quot searchCareContactLastName quot id quot searchCareContactLastName quot value quot quot size quot quot gt lt td gt lt td bgcolor quot FFFFCC quot gt lt input type quot button quot name quot nameGo quot id quot nameGo quot value quot Go quot size quot quot onclick quot return prepop quot gt lt td gt lt tr gt lt table gt The SQL table defines multiple columns each of which is of type quot varchar quot with the column of interest being care Contact Last Name nbsp

Relevancy 46.44%

I am trying to fix my friends computer which is having several weird issues. When you login everything appears to be normal but Windows loads to a black screen with a cursor. Ctrl + Alt + Del to task manager and I can run explorer.exe to restore the desktop. However the problem now is once your at the desktop all programs when you try to run them pop up with an application failed to run side-by-side configuration is incorrect. these problems are not apparent when the computer is ran in safe mode, but I can not figure out what to do. I checked the registry HKLM software windows nt logon and explorer.exe is the value.
Malwarebytes when ran in safe mode does not detect anything either.

A:windows logs in to a black screen, programs have side by side config

Some possibilities: this application failed to start because side-by-side-configuration is incorrect

Was this computer upgraded from Vista to Windows 7? If so that may be the cause. You can try doing a Repair Install of Windows 7 to see if that corrects the problem.

http://www.sevenforums.com/general-discussion/224272-windows-logs-black-screen-programs-have-side-side-config.html
Relevancy 46.01%

I get this message whenever i try to start ay program in the Microsoft office and with trillian. I have tried re installing office but have not had any success in getting the program to run. Is there anything i can do to get these programs running again?

 error.png   152.54KB
  10 downloads

Thanks,
Ryan

A:the application failed to start because its side-by-side configuration is incorrect

I saw that message in Office 2010 when I had it over more than one drive, program on C, files on E it went badly. ended up uninstalling an re-installing on just C:// and never had the issue again

http://www.bleepingcomputer.com/forums/t/399912/the-application-failed-to-start-because-its-side-by-side-configuration-is-incorrect/
Relevancy 46.01%

My friends computer is displaying the message: "the application has failed to start because its side-by-side configuration is incorrect. please see the application log for more detail.", when trying to open Microsoft office and Windows live messenger.

Obviously the programs do not open.
How do we solve this?

Thanks, Joe.

A:the application has failed to start because its side-by-side configuration is incorre

I have seen this before. Do you have AVG installed? AVG and the C++ redistributable seem to conflict. Uninstalling and reinstalling both fixed it.

http://www.techsupportforum.com/forums/f217/the-application-has-failed-to-start-because-its-side-by-side-configuration-is-incorre-560333.html
Relevancy 46.01%

Hi whenever i open the Microsoft word documents infact every microsoft application is not opening.

To fix this sissue steps taken

1)installed Microsoft visual c++ 2010 as all previous versions are already installed

2)run sfc /scannow result:corrupted files found but cannot repair

3)repaired Msoffice home and student edition

4)uninstalled msoffice

5)when reinstalling it won't install

6)so at the end i restored my system from where i started.

Can anybody please help me in resolving this issue
i am using windows vista home premium edition.

A:Application Failed to start side by side configuration incorrect

I have posted 3 posts for help but unfortunately no one has replied with solution on any of the issues so i think that no one here is bothered here to help. I am greatly disappointed by this forum as i joined to interact and get help and help others however i am not getting any help.

http://www.bleepingcomputer.com/forums/t/415562/application-failed-to-start-side-by-side-configuration-incorrect/
Relevancy 46.01%

Windows on Toshiba Laptop all of the recent windows updates have been installed I was having issues running the new zynga game on facebook the ville I assumed The because has failed side the application by side start configuration is Error: to that it was a resource hog and didn t like the laptop and it was possible that I didn t have the most recent installment of Adobe flash so I upgraded that as well It still wouldn t run So I decided to clean up the hard drive I used control panel to uninstall a game that the kids Error: The application has failed to start because the side by side configuration is no longer play because it s now obsolete I also uninstalled Quickbooks it wasn t just quickbooks it was a bunch of crapware that was installed on the laptop when we purchased it but since we don t use quickbook I figured we could get rid of it the only reason I bother stating all of this is because I believe in full disclosure You never know which action caused the issue so it s best to tell it all Sorry for the ramble I have been noticing that the machine was running slower lately so that is why I decided to de-clutter the hard drive After doing this and rebooting I found that I was unable to run Rockmelt it came up with the following Error The application has failed to start because the side by side configuration is incorrect please see the application event log or use the command line sxstrace exe tool for more detail I consider myself a fair pc tech so I have been troubleshooting this for most of the day by searching it out on the internet for the most part I have been told to update the C redist I have made an attempt I downloaded said files on another machine and burned to cd and attempted to install on the machine in question however any program that I attempt to run I get the side by side error message I have been told by my machine that Internet Explorer is not installed and asked if I wanted to remove the shortcut icon Basically my computer will boot up I can log into it and it brings up windows but I cannot do anything on the machine Please assist if possible I have also used the sxstrace program and I have a parsed filed I can attach if needed Thanks so much

http://www.techsupportforum.com/forums/f217/error-the-application-has-failed-to-start-because-the-side-by-side-configuration-is-656365.html
Relevancy 46.01%

Hey Bunch of etc. errors - version configuration, by compatibility, side side Guys I have a problem Last night i was up all night using Bunch of errors - side by side configuration, version compatibility, etc. my pc I had quite a few tabs open using chrome and every once in a while the cpu had a lot Bunch of errors - side by side configuration, version compatibility, etc. of Work to do so the pc would respond more slow During one of these slows something different happened Quite a lot of icons just turned into one of the old school Windows icons most if not all of them being exe files I wanted to fix all of this so I used Bullguard and after that i wanted to use CCleaner CCleaner didn't Work Neither did the other programs They gave me an error in the lines of This version of this file is not compatible with the version of Windows you're running Check your computer's system information to see whether you need an x -bit or x -bit verion of the program Also whenever i shut down my computer or boot it up an error pops up from LogonUI exe Error C program files common files microsoft shared windows live wlidcredprov dll is either not designed to run on windows or it contains an error I figured out how to fix this part I simply installed Windows Live Essentials And when I open Google Chrome it just gives me another error It says that the side by side configuration is incorrect I tried uninstalling MyWinlocker but it is still running in the system tray I tried looking for a process called mwl exe but I can't find it Also whenever the computer boots up I am also greeted with a certain window It's the window that asks what program i want to use for opening a certain file The file is called Andreas and my user profile is called Andreas Gade so I think my user profile might be corrupted Thanks in advance Andreas

A:Bunch of errors - side by side configuration, version compatibility, etc.

Please run System File Checker
 
The sfc /scannow command scans all protected system files and replaces corrupted and incorrect versions with correct Microsoft versions.
 
Click on the Start orb and then type cmd in the Search programs and files box.
 
In the pane above the search box Programs will appear with cmd below it, right click on cmd and choose Run as administrator.
 
If you are prompted for an administrator password or for a confirmation, enter the password, or click Allow.
 
This will open the Elevated Command Prompt, it will look similar to the image below.
 

 
Type in sfc /scannow and then press Enter to start the scan.  Please notice the space between sfc and the /scannow.
 
If the scan finds no integrity  problems the scan will stop.  Type in exit, then press Enter to stop the scan.
 
When the scan is finished please post the log of this scan.
 
To find sfc /scannow log, type cmd in the Search programs and files box. 
 
cmd will appear above the search box under Apps., right click on it and choose Run as administrator, this will open the Elevated Command Prompt.  This will look simlar to the image above.
 
Copy and paste the following in the Elevated Command Prompt, then press Enter.  
 
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt
 
This will place a new icon on the desktop titled sfcdetails.  Double click on this icon to open the log, copy the log and paste it in your topic. 

http://www.bleepingcomputer.com/forums/t/575574/bunch-of-errors-side-by-side-configuration-version-compatibility-etc/
Relevancy 46.01%

Suddenly out of the blue nothing opens - Am not a programmer and don't understand all this lingo have 4 0r 5 redistributible programs C++ 2005, 2008 etc with all relevant service packs - NO LUCK - this is killing me am looking for work and can't get to my resume can't open any programs at all - adobe, microsoft office NOTHING please tell me how to restore my system files to default and start over
 

https://forums.techguy.org/threads/side-by-side-configuration-error-vista-office-2010.995353/
Relevancy 46.01%

Hello Richard,

I've run a scan and the result appears encouraging:

"Windows Resource Protection" did not find any integrity violations."

Attached is a copy of the results: sfcdetailsFrancaBB.txt

I'm moving on to the sxstrace ... according to Lorien's directions.

George

A:Side-by-side configuration error after Quicken 2010 upgrade

Hello George!

Well done on creating a new thread. Thanks for that!

Well, nothing wrong in the SFC log. That has got to be good - as long as we get a lead from one of the other logs!

Thanks for continuing on. I am afraid that I can do nothing until I get those other logs, as that SFC logs showed nothing wrong.

Again, thank you, and the very best of luck!

Richard

http://www.vistax64.com/software/287466-side-side-configuration-error-after-quicken-2010-upgrade.html
Relevancy 46.01%

I sometimes find that some pictures look more or less the same & like to compare them side by side to see which I like best.

http://www.vistax64.com/software/239704-can-i-set-windows-photo-gallery-display-2-more-photos-side-side.html
Relevancy 46.01%

My vista home premium was running perfectly until June after a recommended download from the Microsoft update site Microsoft NET Framework Client Profile for Windows Vista x KB At first I couldn t even get on the internet at all Local only network Called my ISP verified it was not their hardware or my computer Called Microsoft they at least got me back to the internet Now when I go to open programs that worked perfectly well before I get start by side because incorrect.. has configuration its side to Application is failed this message quot The application has failed to start because Application has failed to start because its side by side configuration is incorrect.. it side-by-side configuration is incorrect Please see the application event log for more detail quot A few programs still open most do not The ones that don Application has failed to start because its side by side configuration is incorrect.. t all come up with Application has failed to start because its side by side configuration is incorrect.. this same msg These are the ones that don t open Adobe Photoshop Elements exe zoombrower Ex exe a canon photo editing program c Program Files Microsoft Works WksWP exe quot quot quot WksCal exe quot quot quot wksdb exe quot quot quot WksSb exe quot quot quot wksss exe Norton Security Program c Program Files Norton Engine uiStub exe Quicken WillMaker Plus c Program Files Quicken WillMaker Plus qwp exe Windows Live c Program Files Windows Live Mail wlmail exe quot quot quot Photo Gallery MovieMaker exe quot quot quot Photo Gallery WLXPhotogallery exe There are others but I think they don t open because the system restore program cannot complete a system restore and my shortcuts and program paths have been shuffled due to the incompleted system restore attempt This one really stands out as an important one to be looked at ehshell exe- net Framework Initialization Error quot C Windows Microsoft net Framework V could not be loaded Am I misguided in hoping that if I quot fix quot this ehshell command program everything else may fall into place I am dreadfully afraid of attempting anything with the registry as I am a complete novice but am willing to give it a try if someone has the patience to guide me Please if anyone can help I can t really go out on the internet too far or too wide as my Norton Anti-virus program is not working My surfing for help with this is limited to sites that quot seem quot trustworthy and that s not many now a days nbsp

https://forums.techguy.org/threads/application-has-failed-to-start-because-its-side-by-side-configuration-is-incorrect.932612/
Relevancy 46.01%

I can't install or uninstall any software.
Most of the installed software are not working.
The default windows apps are working and few of the installed games are working (Witcher 3 - don't know how) .
Tried to reinstall Visual C++ Redistro but not working as none of exe files are opening with side by side config issue.

A:Side by side configuration issue since Windows 10 Update on 09 Aug 2016

Originally Posted by Windows Central Question I can't install or uninstall any software.
Most of the installed software are not working.
The default windows apps are working and few of the installed games are working (Witcher 3 - don't know how) .
Tried to reinstall Visual C++ Redistro but not working as none of exe files are opening with side by side config issue. can you perform a sfc scan?
And check that there aren't any pending OS updates and app updates
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

http://forums.windowscentral.com/ask-question/438113-side-side-configuration-issue-since-windows-10-update-09-aug-2016-a.html
Relevancy 46.01%

So far I have done this and it did not help:

1. Open an elevated command prompt. To do this, click Start, click All
Programs, click Accessories, right-click Command Prompt, and then click Run
as administrator. If you are prompted for an administrator password or for a
confirmation, type the password, or click Allow/Continue.

2. Type the following command, and then press ENTER:
sfc /scannow
(The sfc /scannow command scans all protected system files and replaces
incorrect versions with correct Microsoft versions.)


FYI, She gets the message when trying to launch the Second Life Phoenix Viewer, however Second Lifes Viewer 2 loads without error.

I am going to perform a CHKDSK on her Lenovo as recommended in an archived thread from this forum and hopefully that will solve the issue. Can anybody think of anything else?

A:Experiencing (side by side application error). Need troubleshooting tips

What is the application error? Can you upload a snip

See How to Use the Snipping Tool in Vista For More Information

http://www.vistax64.com/crashes-debugging/286501-experiencing-side-side-application-error-need-troubleshooting-tips.html
Relevancy 46.01%

i hate vista. but I gotta work on them cause they break.
I have a laptop handed off that is "stuck" in terms of the way it displays the file system [Windows Explorer].
How do I get this thing to display the side-by-side hierarchical view? you know... computer, drives, top level on the left pane, and the drill-down in the right pane???????

aarrrrgggghhhhh
 

A:? Vista Windows Explorer in side-by-side panes like good OS's??!!

The tree view is to the bottom left of the file view, below the favorites.
 

https://forums.techguy.org/threads/vista-windows-explorer-in-side-by-side-panes-like-good-oss.923995/
Relevancy 46.01%
A:What free photo viewer will allow me to view with two or more pictures side-by-side?

Chasys Draw IES allows working with layers and WildBit Viewer can compare photos side to side.

http://www.vistax64.com/software/291993-what-free-photo-viewer-will-allow-me-view-two-more-pictures-side-side.html
Relevancy 46.01%

"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail."

First of all, I've gotten this on at least 3 different programs. Everyone who's written about this seems to think it's related to their specific program...it's not! Secondly, what I find here in the forum on the subject tells me there has been no solution...also am unable to find any on the 'net'. I think it acts like a virus and is spreading...

What's up with this??? Does anyone know...? It has kept me from opening iTunes so I can't work with my iPad anymore. Certainly there must be someone knowledgeable enough to know what this is and what to do about it...right?:

 

https://forums.techguy.org/threads/the-application-has-failed-to-start-because-its-side-by-side-configuration-is-incorre.1009325/
Relevancy 46.01%

On quite a few different programs i m getting the error message quot The application has failed to start because its side by side configuration is incorrect Please see the application event log or use the command line sxstrace exe tool for more detail quot I ve read so many forums online where people have had a similar issue but nothing has been helpful The most common suggestion is related to VisualC but when i installed it I multiple is error incorrect programs? on side-by-side configuration got side-by-side configuration is incorrect error on multiple programs? the same error I tried running it without saving then I saved it and tried running it again the same error I ve opened the event viewer theres quite a few sidebyside error messages but I dont side-by-side configuration is incorrect error on multiple programs? know what to do with any of that information The first side by side error is this one Microsoft Windows Common-Controls language quot amp x a quot processorArchitecture quot X quot publicKeyToken quot b ccf df quot type quot win quot version quot quot C Program Files x Microsoft Silverlight Silverlight Configuration exe I havn t a clue how it started my computer was fine yesterday I opened it today to these errors I tried rebooting but it didnt help If any more information is needed I ll provide what I can Thanks

A:side-by-side configuration is incorrect error on multiple programs?

Follow the instructions here http://support.microsoft.com/kb/929135 to install VisualC++

http://www.bleepingcomputer.com/forums/t/338101/side-by-side-configuration-is-incorrect-error-on-multiple-programs/
Relevancy 46.01%

Hi, I'm hoping someone here can help me, I was referred to this forum by nasdaq in the malware removal forum to help with some residual problems I've been having with my hp notebook (http://www.bleepingcomputer.com/forums/t/498613/infected-with-virus-appplicunwntwin32adwareibryteh289567536/
).
 
The following error is popping up when I try to open certain programs on my computer: "The application failed to load because its side-by-side configuration is incorrect.  Please see the application event log or use the command-line sxstrace.exe tool for more detail."
 
I am able to access the sxstrace.exe tool but when I try to get the trace to run, I get an error message- "Access is denied" (see above post for screenshots, etc.).  At first I just noticed this happening with my Kindle for PC, but has now graduated to my Dropbox as well.
 
Any advice on what to do next?

A:Error Msg: This application failed to start because its side-by-side configurati

I am currently trying the steps listed here-
 
http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/this-application-failed-to-start-because-side-by/7673bf12-87c2-48ca-b5ae-b8aa85e295dc 
 
and will advise.
 
Also- I realize the sxstrace.exe tool may not have worked because I didn't access the cmd prompt in administrator mode which gives me a different prompt: Windows\system32.
 
Will try that as well.

http://www.bleepingcomputer.com/forums/t/499830/error-msg-this-application-failed-to-start-because-its-side-by-side-configurati/
Relevancy 46.01%

I have Vista. When someone sends me an Adobe document I can't open it. The error message says that my side by side configuration is inaccurate. If I save the document to my desktop, I can then open Adobe and open it from there but it is a hassle. Why can't I just open the document from the source?

A:Adobe Reader - side by side configuration is inaccurate error

Latest version of Acrobat? Tried uninstalling and re-installing to see if it fixes it?

Didn't do something silly like use a duplicate file utility or remove things from the WinSxS folder?

Better option, use Foxit instead,

Foxit Software - Foxit Reader for Windows

http://www.vistax64.com/software/222633-adobe-reader-side-side-configuration-inaccurate-error.html
Relevancy 46.01%

Hi there,

So in XP one was able to select open windows from the taskbar via holding CTRL and left clicking on each one, then right clicking and tile / arrange vertically the selected windows...

In windows 7 I cant seem to do it automatically. Yes i can do it manually with three or more windows, but i shouldnt have to.

I cant get three or more windows to tile next to each other, i can only get two windows to go side by side via the snap feature.

Any ideas on how to get three or more windows side by side semi-automatically?

Thanks for reading.
 

A:Window snap - How to get three or more windows arranged vertically side by side?

https://forums.techguy.org/threads/window-snap-how-to-get-three-or-more-windows-arranged-vertically-side-by-side.899043/
Relevancy 46.01%

How can I open 2 excel files side by side in Office 2010?

A:How to open 2 excel files side by side in Office 2010?

See if this helps: Comparing Two Excel 2010 Worksheets Side by Side - For Dummies

http://www.sevenforums.com/microsoft-office/193878-how-open-2-excel-files-side-side-office-2010-a.html
Relevancy 46.01%

I just came home from work and there was a power failiure while I was working. I turned my computer back on and went to open Google Chrome, but this message appeared...

"The application has failed to start because its side by side configuration is incorrect. Please see the application event log for more detail."

I have no clue what this means or what to do. I'm using safari at the moment and went on google and all the instructions look really confusing. I know VERY little about computers and the terms and what not. So any help would be greatly appreciated.

Thanks,

A:Help! Cant Open Google Chrome. Side by Side Configuration Is Incorrect.

If this "repair" does not work I would try a restore point if you have a recent one.

Message: The application has failed to start because its side-by-side configuration is incorrect. | Chief Architect Knowledge Base

Basically for Vista it is open Programs and Features from Control Panel, scroll to chrome and click Repair.

http://www.vistax64.com/browsers-mail/302603-help-cant-open-google-chrome-side-side-configuration-incorrect.html
Relevancy 46.01%

Hello and thank you in advance for your to open configuration when Side-by-side trying incorrect excel & word help I am in desperate need To be honest I m not entirely sure when this problem started as I haven t been on much the last week or so but I ve tried all the trouble shooting I could find but still cannot manage to fix this problem When I try to open Word or Excel I get an error message quot The application has failed to start because Side-by-side configuration incorrect when trying to open excel & word its side-by-side configuration is incorrect Please see the application event log or use the command-line sxstrace exe tool for more detail quot Not totally sure what that means but I have ran an administrative command prompt of sfc scannow and all my bad Side-by-side configuration incorrect when trying to open excel & word files are fixed at least that s what it tells me when I try to run it again I also read tips where it tells you to go to the Event Viewer to get more details on the side-by-side problem Well this seems to be having a problem too I get an error message saying quot MMC could not create the snap-in The snap-in might not have been installed correctly Name Event Viewer CLSID FX b ad-fe c- -be - cbb cb quot I did just get rid of the Scour redirect virus and I m sure this was happening while I had that not sure if it s related but when I scan and am doing another just to check I come up clean Thanks again for your help

A:Side-by-side configuration incorrect when trying to open excel & word

Well...have you tried uninstalling the MS Office suite...and then reinstalling?

It could have become damaged. Uninstalling/reinstalling, then updating it would take care of that possibiliity.

Louis

http://www.bleepingcomputer.com/forums/t/411735/side-by-side-configuration-incorrect-when-trying-to-open-excel-word/
Relevancy 46.01%

Ok so I am going to go straight into the good stuff Essentially I launch Dragon Age and get an error about side by side configuration I have already done an enormous amount of research on this subject and have found that the problem is usually attributed to the C Redistributable from Microsoft I tried to remedy this problem different ways manually working from a system restore point where Dragon Age Configuration Error 'easy' Side by fixes several Side (Attempted already) amp Bioshock did not work but Mass Effect Call of Duty MW and the Original Bioshock were still fully functional this system restore point had the Microsoft C Redistributable installed and Side by Side Configuration Error (Attempted several 'easy' fixes already) again the games I listed in parenthesis were working fine I first uninstalled the Redistributable and downloaded and installed the Redistributable restarted the computer even though it did not prompt me and ran into a massive error Essentially this install made every game unplayable all of those I listed above Next I uninstalled the Redistributable and reinstalled the without a restart and tried to launch every game listed above Of course I was back to square one with Dragon Age and Bioshock still giving me the side by side configuration error Lastly I tried launching each game through the program depends exe using the exe to see exactly which dependencies each game required Of course both Dragon Age and Bioshock gave me the side by side configuration telling me that a MSVCP dll file could not be found within my system A quick google search later let me know that this file was part of the C Redistributable package My drivers directX etc are all up to date I fixed these first and I m so frustrated right now as I am bouncing back between somewhat working and completely broken If any fix could be thrown out there that d be greatly appreciated and I will be checking back very often to try to work with you guys My question is simply Is there some type of conflict of compatibility between and or is there some way to have both installed on the computer at once I am running Vista Service Pack nbsp

A:Side by Side Configuration Error (Attempted several 'easy' fixes already)

This error is by no means fixed, however I thought that I would post in some detailed error information from my event viewer (please read the first post, however, as my problem is unique):

Activation context generation failed for "C:\Program Files\Dragon Age\bin_ship\daorigins.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.

Activation context generation failed for "c:\program files\2k games\bioshock 2\sp\builds\binaries\BIOSHOCK2.EXE". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.
 

https://forums.techguy.org/threads/side-by-side-configuration-error-attempted-several-easy-fixes-already.905945/
Relevancy 46.01%

Windows -bit None of my to configuration start failed - side-by-side application has is incorrect the applications or programs work not even internet explorer sending this from another computer I ran HJT and this is what I got Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Windows WinNT MSIE Internet Explorer v Boot mode Normal Running processes C Program Files x TOSHIBA ConfigFree NDSTray exe C Program Files x TOSHIBA ConfigFree CFSwMgr exe C Users Aja Documents HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Start Page http msn com R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer the application has failed to start - side-by-side configuration is incorrect Search SearchAssistant R the application has failed to start - side-by-side configuration is incorrect - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKLM Software Microsoft Internet Explorer Main Local Page C Windows SysWOW blank htm R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName R - URLSearchHook Zynga Toolbar - b ec e- a- the application has failed to start - side-by-side configuration is incorrect b -b cb- b - C Program Files x Zynga tbZyn dll O - BHO AcroIEHelperStub - DF C-E AD- -A -FA C EBDC - C Program Files x Common Files Adobe Acrobat ActiveX AcroIEHelperShim dll O - BHO no name - C C A-E - b - D - CECB - no file O - BHO Zynga Toolbar - b ec e- a- b -b cb- b - C Program Files x Zynga tbZyn dll O - BHO Windows Live ID Sign-in Helper - D - C - ABF- ECC- C - C Program Files x Common Files Microsoft Shared Windows Live WindowsLiveLogin dll O - BHO Java tm Plug-In SSV Helper - DBC -A - b-BC - C C C A - C Program Files x Java jre bin jp ssv dll O - Toolbar Zynga Toolbar - b ec e- a- b -b cb- b - C Program Files x Zynga tbZyn dll O - DEFAULT User Startup Best Buy Software Installer lnk C Program Files Best Buy Software Installer Best Buy Software Installer exe User Default user O - Extra context menu item E amp xport to Microsoft Excel - res C PROGRA MIF BA Office EXCEL EXE O - Extra context menu item Google Sidewiki - res C Program Files x Google Google Toolbar Component GoogleToolbarDynamic mui en D FF C D BF dll cmsidewiki html O - Extra button Blog This - C - CB - a-A C -D FCDDC D - C Program Files x Windows Live Writer WriterBrowserExtension dll O - Extra Tools menuitem amp Blog This in Windows Live Writer - C - CB - a-A C - br D FCDDC D - C Program Files x Windows Live Writer WriterBrowserExtension dll O - Extra button Send to OneNote - A- - f c- - EE C C - C PROGRA MIF BA Office ONBttnIE dll O - Extra Tools menuitem S amp end to OneNote - A- - f c- - EE C C - C PROGRA MIF BA Office ONBttnIE dll O - Extra button Research - B - CC- C -B BE- C C A - C PROGRA MIF BA Office REFIEBAR DLL O - Unknown file in Winsock LSP c program files x common files microsoft shared windows live wlidnsp dll O - Unknown file in Winsock LSP c program files x common files microsoft shared windows live wlidnsp dll O - DPF E E F- F- FB - -AC BF A - http platformdl adobe com NOS getPlusPlus gp cab O - Service SystemRoot system Alg exe - ALG - Unknown owner - C windows System alg exe file missing O - Service SystemRoot system efssvc dll - EFS - Unknown owner - C windows System lsass exe file missing O - Service systemroot system fxsresm dll - Fax - Unknown owner - C windows system fxssvc exe file missing O - Service keyiso dll - KeyIso - Unknown owner - C windows system lsass exe file missing O - Service comres dll - MSDTC - Unknown owner - C windows System msdtc exe file missing O - Service SystemRoot System netlogon dll - Netlogon - Unknown owner - C windows system lsass exe file missing O - Service systemroot sys... Read more

https://forums.techguy.org/threads/the-application-has-failed-to-start-side-by-side-configuration-is-incorrect.1000341/
Relevancy 46.01%

So my issue is that when I log into my computer it will some times not all the time revert from a side by side multi monitor setup to a over under setup Like if you go into screen resolution settings I will have it set to monitor on the left and monitor on the right then when I lock the computer and then log back in it will have monitor positioned over the top of monitor I'm thinking there is possibly a default that it keeps going back to but I'm not sure where I would look for that other than the screen resolution settings Another possibility for the origin of this problem could be Microsoft User Experience Virtualization Agent which we have installed on all our computers here to synchronize the various setting we have connected to our profiles It looks like UEV might synchronize monitor layout settings and with that it could be some how defaulting on an over under set up Overall I am unsure of what to do about his Any one Monitor by to over resets side under side environment Multi setup not have any ideas

http://www.sevenforums.com/hardware-devices/386366-multi-monitor-environment-resets-over-under-setup-not-side-side.html
Relevancy 46.01%

Hello I am usually the person people go to when they have computer issues but I am not by any means formally educated in any IT field or even familiar with C bin dll files etc but including config Side Side error by Multiple issues I am pretty good at figuring out resolutions to fairly complex computer situations both hardware and software related Unfortunatly I am having Multiple issues including Side by Side config error quite a few problems with my new Vista laptop that I cannot resolve after trying every suggestion seen online It seems to have started with Adobe I installed adobe reader and since then all my Multiple issues including Side by Side config error office programs adobe most Multiple issues including Side by Side config error other applications do not open The error is a side by side config error Heres are some examples in event log Activation context generation failed for quot C Program Files x Common Files Symantec Shared coShared Browser CoIEPlg dll quot Error in manifest or policy file quot C Windows WinSxS manifests x policy microsoft vc crt fc b b a e e b none e c b f c f manifest quot on line The policy contains a lt noInherit gt tag but only manifests may have these Activation context generation failed for quot C Windows Microsoft NET Framework v fusion dll quot Error in manifest or policy file quot C Windows WinSxS manifests x policy microsoft vc crt fc b b a e e b none e c b f c f manifest quot on line The policy contains a lt noInherit gt tag but only manifests may have these Activation context generation failed for quot C Program Files x Microsoft Office Office EXCEL EXE Manifest quot Error in manifest or policy file quot C Windows WinSxS manifests x policy microsoft vc crt fc b b a e e b none e c b f c f manifest quot on line The policy contains a lt noInherit gt tag but only manifests may have these I have uninstalled and reinstalled every program NET framework all C files in the programs list to no avail Also I cant recreate it but mscorwks dll seems to be corrupted or missing On occasion instead of the side by side error I get this if I run the program from a different location These could all be related but that is not the end of it I cannot install SP for vista It failed over times Error code I have tried manually same error Tried from a disk same error The updater actually just downloads to and sends the error code I dont know if this is related to the side by side errors but somewhere something is corrupted im assuming I cannot install directx I tried to run a game and when I did it tried to auto-install directx It failed citing error Now i am missing dxdx dll and cannot run any programs games that require directx I have tried to uninstall but obviously I cannot I tried every compatible version of directx Please help I am at a total loss I am pretty sure it is all related so hopefully someone has seen this and it is a quick fix Also there are no restore points that dont give me these errors Including the directx one Microsoft has no answers and I have searched every inch of the web and all three problems seem to go mostly unresolved and remain open I dont have another computer nor can I afford one I have to make this one work

A:Multiple issues including Side by Side config error

A quick update...

After going back to the log files to see when the errors exactly started i came across over 500 errors in a single day. They were caused by Symantec. Literally 50 a second for ten minutes these errors were logged, i paged through them and it took me forever.

Activation context generation failed for "C:\Program Files (x86)\Common Files\Symantec Shared\coShared\Browser\2.0\CoIEPlg.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.

More error logs that may be usefull

Activation context generation failed for "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Graphics-Full-Existing\MMLoadDrv.exe".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.

Activation context generation failed for "C:\Windows\SysWOW64\sirenacm.dll".Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_516e2c7b0f48c07f.manifest" on line 3. The policy contains a <noInherit> tag, but only manifests may have these.


I finally found the first error date... here is the event log for immediatly before the errors began

The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog

http://www.techsupportforum.com/forums/f217/multiple-issues-including-side-by-side-config-error-408781.html
Relevancy 46.01%

So my issue is that when I log into Monitor side under over side resets environment setup not Multi to by my computer it will some times not all the time revert from a side by side multi monitor setup to a over under setup Like if you go into screen resolution settings I will have it set to monitor on Multi Monitor environment resets to over under setup not side by side the left and monitor on the right then when I Multi Monitor environment resets to over under setup not side by side lock the computer and then log back in it will have monitor positioned over the top of monitor nbsp I'm thinking there is possibly a default that it keeps going back to but I'm not sure where I would look for that other than the screen resolution settings Another possibility for the origin of this problem could be Microsoft User Experience Virtualization Agent which we have installed on all our computers here to synchronize the various setting we have connected to our profiles It looks like UEV might synchronize monitor layout settings and with that it could be some how defaulting on an over under set up Overall I am unsure of what to do about his nbsp

https://social.technet.microsoft.com/Forums/en-US/4290bed6-9fe9-4bad-bdd1-90bcb1179fa8/multi-monitor-environment-resets-to-over-under-setup-not-side-by-side?forum=w7itproui
Relevancy 46.01%

I have extensively searched these forums for a solution to my problem but can't find it I have found some similar problems but none exactly the same here is what happened I have a Windows computer running just fine I pulled the hard drive out of my old computer and had installed it in the new one and it seems fine I can access both drives and i all my files are there The problem i am having is that i can't open any files Installed 2nd configuration incorrect drive....side-by-side hard from my old hard drive if the program they need to open is also on that old hard drive For example my old Installed 2nd hard drive....side-by-side configuration incorrect hard drive has AutoCAD on it my new hard drive doesn't When i click on AutoCad i get the annoying quot The application Installed 2nd hard drive....side-by-side configuration incorrect has failed to start because its side-by-side configuration is incorrect quot message This happens with lots of programs not just AutoCAD I have MS Office on the old hard drive but when I try to open a word or excel file it won't open It's like the computer is trying to open files from my old hard drive with applications that are on my new drive This is a problem because i cant afford to buy copies of autoCAD and copies of MS Office and copies of every program i have I feel like there is a simple fix for this but i can't figure this one out Thank you for help

A:Installed 2nd hard drive....side-by-side configuration incorrect

Hi welcome to the forum.

to my knowledge you will need to reinstall the programs as you cant use programs that are installed on the hard drive from another computer as it will have writen registry items when the program was installed.

i'm sure someone will correct me if i am wrong.

http://www.sevenforums.com/hardware-devices/358307-installed-2nd-hard-drive-side-side-configuration-incorrect.html
Relevancy 46.01%

Is there such a program that will force any video or video game(executable) to display in SBS image? I would like to use this program to play video games from my pc on my GearVR unit. I feel like this shouldnt be too hard to do overall. I know apps like this exist for mobile. I want something like this for my pc. Please help, I beg of you.

http://www.computerhope.com/forum/index.php/topic,157651.0.html