Windows Support Forum

Computers Using "HP Install Network Printer Wizard" Vanish from My Network Places

Q: Computers Using "HP Install Network Printer Wizard" Vanish from My Network Places

I am running a peer-to-peer LAN Vanish from Wizard" Network Install Network Using Places Printer Computers My "HP of Win XP Pro SP boxes Over of them in a particular workgroup All static IP addresses All machines have File and Print Sharing set up and Windows Firewall turned off I have used quot HP Install Network Printer Wizard quot to install a couple of HP s Computers Using "HP Install Network Printer Wizard" Vanish from My Network Places and Computers Using "HP Install Network Printer Wizard" Vanish from My Network Places a HP d printer each of which have JetDirect N cards installed But my problem isn t with the installation and use of the printers In fact this software works fine and everyone prints happily Here s the catch all machines using HP Install Network Printer Wizard mysteriously disappear from My Network Places no matter what machine I use to look at My Network Places after minutes If I reboot one of them it s back for about minutes then gone Now they re pingable and in fact you can find them using the Search button But they re not visible and to my staff this is a major obstacle I have boxes without the HP wizard and they re visible on My Network Places Using a couple different boxes as guinea pigs I can affirm that deleting the printers uninstalling HP Install Network Printer Wizard and eliminating references to it in the registry does not reverse the situation and fix the problem Ugh I can also affirm that disabling our Kaspersky Anti-Virus does not solve the quot vanishing quot problem A call to HP Support and subsequent discussion with their reps yielded no help although they did get a good chuckle out of it nbsp

Relevancy 100%
Preferred Solution: Computers Using "HP Install Network Printer Wizard" Vanish from My Network Places

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Computers Using "HP Install Network Printer Wizard" Vanish from My Network Places

OK there is a catch here you know how the printers after 20 min of no using them is going in stand by mode ... for some reason the network card is going in standby mode for the printer also if you try to print over the network you gonna see that the printer is going back visible.
Solution: There was a option in Network Monitor Devices for don't going on that "standby mode" check and see if this will help you.

https://forums.techguy.org/threads/computers-using-hp-install-network-printer-wizard-vanish-from-my-network-places.596562/
Relevancy 34.83%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
 

http://www.techspot.com/community/topics/problems-with-wireless-network-adapter.188964/
Relevancy 16.77%

Hi Could anyone please confirm if I buy Samsung 850 Evo 500GB, will I be able to install this on my desktop? Just looks like it only fits for laptops?

Thank you
 

A:Samsung 850 Evo 500GB, want to install on desktop

There are adapters available if the drive doesn't come with them packaged. The adapters adapt from 3.5" drive bay to 2.5" drive bay.

http://www.newegg.com/Product/Produ...scription=hdd+adapter+bracket&N=-1&isNodeId=1
 

http://www.techspot.com/community/topics/samsung-850-evo-500gb-want-to-install-on-desktop.216637/
Relevancy 47.3%

I have a group of computers in a small office without a server that are connected and share via homegroup. When I added a new laptop with win 8.1 to the homegroup, I couldn't ever access the shared printer which is attached to the win 7 desktop. I deleted and recreated the homegroup multiple times from different computers and nothing seemed to change the situation. I deleted the homegroup completely and just tried to share the printer separately connecting via computer share name and still not good. Now if the win 8.1 computer can recognize the printer, none of the win 7 computers can print to it and vice versa. I need them all to be able to share the printer at the same time and share 2 folders between all of them. How can I accomplish this besides down grading the 8.1 to win 7 and installing win 7 on it. Thanks for the assistance
 

A:Sharing printer and files between win 7 and win 8.1 computers

If the printer has Ethernet support, connect it to the router and then use Add Printer as a Network printer on every PC (ie not directly connected to any PC) and at least that will solve one issue. Remember to get the correct print driver for each system; Win/7 vs Win/8.

I'll surf for the sharing issue and post back ...
 

http://www.techspot.com/community/topics/sharing-printer-and-files-between-win-7-and-win-8-1-computers.216549/
Relevancy 51.6%

I just solved my own problem and thought others might benefit since I could not find the solution using internet search My Realtek HD Audio manager seemed to be creating an echo on my quot Line In quot HD Audio Realtek "line from effect) (if in" echo it Removing output sound not a is audio signal I had already set the environment and equalizer sound effects options to lt None gt but the echo persisted I found the problem seems that I was essentially duplicating the Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) Line In audio stream The first quot source quot I found was the HD Audio manager You can open the manager and view the Line In tab - mine had a non-zero playback volume the slider was NOT all the way to Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) the left for zero playback If you want Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) output from the HD Manager that makes sense I also found out a second Line In quot source quot It was in the Line In properties settings where I had checked off the option to quot Listen to this device quot When I disabled that the echo disappeared To view this Line In properties tab right-click on the speaker icon in the notification area then select Recording Devices yes quot Recording quot Then the tab will display in a window with the title Sound You should see the Line In device in the list Right-click on this item and select Properties The Line In properties window pops up Then select the Listen tab UNselect Listen to this device The echo should disappear if you re experiencing my problem I hope this helps someone I m just trying to help the community from which I ve received so much help grinthumb nbsp

A:Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect)

Two same signals

You're doing the right thing... getting rid of the other input signal.
 

http://www.techspot.com/community/topics/removing-line-in-echo-from-realtek-hd-audio-output-if-it-is-not-a-sound-effect.178881/
Relevancy 35.69%

First of all, sorry for my bad english.
My pc was working perfectly for about a year now, but these days it started having problems.
In the past few weeks it started disconnecting from the internet with the message: you don't have a valid
ip configuration. (It was working on the other pc connected to the router with lan, and on the notebook connected through wifi)
A reboot of the pc/router did always solve my problem in these situations.
Yesterday, my internet connection started connecting/reconnecting, and I couldn't solve it in any way, not with
a restart, and not with that network repair tool (idk it's name, I have hungarian windows). When it stayed connected for more then 2 seconds I was even able to load google, youtube, other sites,
I tried some solutions, like disabling the energy saver settings, setting it to 10mb half duplex, etc, but nothing worked, my
internet kept connecting/reconnecting.
Today I started my pc and it works perfectly.. Any ideas on how to solve it? I have the newest lan driver.

My mobo is Asrock 960gm-vgs3 fx.
 

A:Network keeps reconnecting

It appears that you manually configured the IP for at least one system.
DON'T do that - - make sure all systems use DHCP
 

http://www.techspot.com/community/topics/network-keeps-reconnecting.216254/
Relevancy 44.29%

I have a choice to make on a new monitor.

It needs to be VESA mountable and will be for strategy gaming and work purposes. Games like Wargame, Supreme Commander and World of Tanks. I work as a sysadmin so think lots of windows open!

Do I get a 24" monitor like this Benq (recommendations on a different one are welcome)

Or do I get a 27" monitor. If you think 27" what res would you recommend baring in mind I am sporting a 760gtx.

Thanks,
 

A:24" monitor or 27"

I think 1080P is the best bet for your GTX 760. 2560x1600 or 2560x1440 (27 inch panels) might be a bit too much. It is really personal preference whether you weant a 24 inch or a 27 inch. There are 1080P monitors in both sizes. I recommend Dell, BenQ, ASUS, Samsung, and ACER monitors. There are some other good ones, but I cant think of them off the top of my head.
 

http://www.techspot.com/community/topics/24-monitor-or-27.201808/
Relevancy 21.5%

I have HP LJ p4014. I was wondering if there would be a difference between using a maintenance kit thats 220v on a 110v printer. Any help would be good.
 

A:Printer 110v vs. 220 v.

What does that maintenance kit do? Because you can easily go into HP software and order your printer to clean printheads or align them.
 

http://www.techspot.com/community/topics/printer-110v-vs-220-v.191819/
Relevancy 16.34%

Hi all,
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
 

A:Unable to install Nvidia driver and also to play games on Windows 8.1

I'd recommend to do the following:

Perform a clean install of Windows

Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.

Let me know how it goes after you've tried what I've mentioned.
 

http://www.techspot.com/community/topics/unable-to-install-nvidia-driver-and-also-to-play-games-on-windows-8-1.213781/
Relevancy 60.63%

Resolved DNS on other on one problem working laptop, DNS network computers problem on one laptop other computers on network working I returned home for the holidays with my laptop running Windows Enterprise -bit When I connect to the wireless network my laptop reports that it is connected with internet access but there is no browsing capability at all P P works Steam works but Chrome Firefox Steam browser give me DNS problem on one laptop, other computers on network working the quot This webpage is not available quot page telling me that the DNS lookup failed All the other computers at home are working happily My settings were to obtain an IP address and DNS server address automatically nslookup said DNS request timed out It didn t work with the wireless or the wired internet with an ethernet cable I set up another network by using my iPhone as a hotspot to make sure it wasn t an issue with all connections and my computer could browse just fine using the iPhone hotspot But it didn t work with my home connection The first thing I tried was to use openDNS s DNS addresses and with my home connection It still failed and nslookup gave the same quot DNS request timed out quot I reset the modem router it s combined unfortunately to factory settings and tried directly connecting with an ethernet cable again It worked for half a second and I opened webpages before it stopped and gave the DNS errors again I tried the wireless internet and it still didn t work I can connect to the modem router I made a guest network just to try it and I got DNS errors again When I reconnected to my primary network it worked for half a second again then stopped My next attempt to fix it was going to the cmd prompt and typing ipconfig release then ipconfig renew I restarted my computer and tried again but I still received the same errors with P P working like before I turned off my firewall and tried but it still didn t work Then I tried ipconfig registerdns restarted my computer and tried again Still didn t work At this point IPv has been disabled but it s still not working I restarted the modem router multiple times but it does nothing to alleviate the problem I have Microsoft Security Essentials did a scan nothing detected Also tried System Restore to two days ago got an error about how it failed Summary Using openDNS address Turned off IPv ipconfig release ipconfig renew ipconfig registerdns no virus trojan system restore failed None of the above worked Other computers at home using the ISP s provided DNS server work My computer works with other connections but not my home network Is there anything else I can try Thanks in advance nbsp

A:DNS problem on one laptop, other computers on network working

Fe3C said:





Summary:
Using openDNS address.
Turned off IPv6
ipconfig /release
ipconfig /renew
ipconfig /registerdns
no virus/trojan
system restore failed

None of the above worked.
Other computers at home using the ISP's provided DNS server work[1].
My computer works with other connections, but not my home network.Click to expand...

Good work. The router is fine[1] so don't fuss with it anymore.

Look for an updated driver for your WiFi adaptor.

On any working system run IPCONFIG /ALL and compare it to the results on the failing system. Look for missing Gateway address or IP address like 169.x.y.z

Some concern re failing system restore, but that's not a networking problem per se.

Work on a wired network first and then move to wifi.
Empty all manual settings on the LAN Connection (get properties, scroll to tcp/ip, click property button - - check ALL tabs; delete everything.

You should be able to PING 8.8.8.8 and then PING google-public-dns-a.google.com.
This shows the LAN adaptor has connectivity and DNS resolution.

Now do the very same sequence with your WiFi connection.
Disconnection from the router and then reconnect.
Inspect IPCONFIG /ALL again to look for valid IP addr, gateway addr and valid DNS settings. (not the OpenDNS you had before).

ping 8.8.8.8 ; if this doesn't work, then the WiFi settings are invalid even before DNS is an issue.
 

http://www.techspot.com/community/topics/dns-problem-on-one-laptop-other-computers-on-network-working.174565/
Relevancy 50.74%

Hey there all.

This problem just happened recently. Every time I put a blank CD in my CD drive, a message appears saying "E:\ is not accessible. Incorrect Function. I can watch DVDs but it won't recognize any blank CDs I put.

Any ideas?

Thanks in Advance.
 

A:Drive is not accessible - "incorrect function"

First try this from the Windows Explorer after you have inserted a disc.

Right-Click on E: drive

Select Properties from the pop up menu

Select the Recording Tab

then check the "Enable CD Recording On This Drive" box.
.
 

http://www.techspot.com/community/topics/drive-is-not-accessible-incorrect-function.166087/
Relevancy 35.69%

Hey guys,

I had a quick question about a network at home.

My house is 15m tall and 9m wide, I want to network 3 computers (mine, wife, son).

Should I wire the house with Ethernet cat 5e cable and put a 100 base T switch?
Or
Just put a Wi-Fi access point and Wi Fi cards for the 3 computers.

I prefer wireless, but I?ve heard Ethernet would have slightly faster speeds due to less aerial interference.

Suggestions? Solutions? Thank you!
 

A:A network for home? Which one?

First of all... don't put a 100 base T switch anywhere but the backup bin. If you're going to bother wiring anything put in GbE as it's inexpensive now. Also, if you're going to bother with any wiring then I'd put in the best/fastest type I could find to future proof it as much as possible. Fishing cable isn't something you want to repeat in a couple of years.

To more directly answer your question, Wi-Fi will probably be fine for you depending on the distance from your WAP (wireless access point) and what your walls are made of. You'll also need to keep in mind any other Wi-Fi interference so the distance to your neighbors can have an affect. All that being said any modern WAP will be faster than a 100 base T switch under normal conditions when it comes to throughput (how much data you can move) - but worse when it comes to latency (how long a specific bit of data takes to get from one point to another). If you're playing games you'll want low latency. If you're just streaming content or moving files around then you just want throughput.
 

http://www.techspot.com/community/topics/a-network-for-home-which-one.213242/
Relevancy 35.26%

Ok so I do not know if this is the right forum or site to ask this question to be honest It applies to Linux though more applies to a networking issue So here is the problem I currently live in an apartment that has its own network that is given to them by their ISP So my router is getting its ip address from their DHCP server router and then I give out my own problem Apartment Network IP address via my own router So Im trying to be able to SSH into my machine or even just to remote desktop onto my Windows side I have my router set up accordingly and I can ssh into my machine when I am on their own network not my own but when I am away I cannot because Apartment Network problem my routers IP address is unique in the apartment complexes network Does anyone know a solution to this I was thinking a VPN into their network Apartment Network problem and then SSH into my own afterwords Problem is I m really not sure if this is a solution and if so How do I do it Thank you for your time I hope someone has a solution to my problem nbsp

A:Apartment Network problem

This is a STATIC route or PORT FORWARD problem and without the consent the apartment owner, neither are possible.

Your data flow is

Code:
ISP == Apt.router---Your.router---your.pc
Assume the Apt.router is at address 192.168.1.1
If yours is anything else, then your lan is isolated from the apt and you have great security.
* to get Public access (eg from work) to your pc, you need to
cross the Apt.router nat, get to your.router and port forward to your pc - - complicated.​If your.router is on the Apt.lan (meaning you disable DHCP in your router)
you are exposed to all the other apartments,
and still need port forward to your PC, and that requires a FIXED address assignment in the apt.router.​
IMO, the conclusion is this is non-trivial, has dependencies on the good will of the apt owner/tech support guy and requires extra diligence on your systems for security & privacy.
This would need (imo) to be more than just 'I want to play games on the Internet'
 

http://www.techspot.com/community/topics/apartment-network-problem.213209/
Relevancy 35.26%

So I'm in the market for a new wireless card for my desktop. The last one I bought was a piece of crap from the start. You don't generally see network card reviews. Was wondering what some good quality options would be.
 

A:Network card recommendations?

The best option would probably be a dual-band one that has 802.11ac support; if you've got an AP that supports the standard, it'd be worthwhile investing in that kind of card. They can be kinda expensive though (usually around $100 from what I've seen).
 

http://www.techspot.com/community/topics/network-card-recommendations.208722/
Relevancy 25.8%

I'm currently in the process of trying to run three separate videos on three separate computers which are then connected to three separate projectors (sorry if this seems confusing). I want these videos being projected to all start and run simultaneously, keeping them in sync with one another.

I've read posts about the VLC Media Player, but am not sure if it's what I need since I will be using three separate computers and then connecting to projectors.

If anyone knows of a way that I can do this either with the VLC Media Player or without I'd greatly appreciate the help. Thanks guys, xx

(I'm not quite sure if this should be solved with hardware or software)
 

A:Running three videos on separate computers simultaneously

I want these videos being projected to all start and run simultaneously, keeping them in sync with one another.Click to expand...

almost 99.9% impossible. Whether it's streaming or simple MP4s, each system is pulling independently and every system has a unique client-host latency and will likely get out of sync almost immediately.
 

http://www.techspot.com/community/topics/running-three-videos-on-separate-computers-simultaneously.212543/
Relevancy 51.17%

I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp

A:I can hear "computing sounds" from my computer, through my speakers

Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
 

http://www.techspot.com/community/topics/i-can-hear-computing-sounds-from-my-computer-through-my-speakers.202182/
Relevancy 79.55%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 21.07%

Before I start I want you to know that the printer works When I plugged it into my computer it was automatically recognized drivers were downloaded from windows update and I was printing in less than a minute When I plunged it with OfficeJet HP printer Troubles 5610 into my friends laptop the actual owner the issues begin The troubled computer is HP laptop with Win x When I plugged it in via same USB cable I used with mine it was automatically recognized drivers were downloaded from windows update but I was not able to print anything I went to HP website and downloaded the entire software package and still nothing When I am in the devices and printers window the computer recognizes when the printer is plugged in and and when it is not But I can not even print a test page The funny thing is that I can scan from the printer to Troubles with HP OfficeJet 5610 printer the laptop but I can not print to it There are other printers connected to the laptop both network and USB and they work just fine Here is Troubles with HP OfficeJet 5610 printer what I did so far I tried Troubles with HP OfficeJet 5610 printer the automatically installed drivers I downloaded the HP recommended drivers I have restarted the spooler There is nothing stuck in the job list I have manually removed HP drivers and started again I have used the HP driver removal tool maximum level and started again I have set the printer to print directly to printer and bypass the spooler And I still can not print but I can scan Any thoughts anyone nbsp

A:Troubles with HP OfficeJet 5610 printer

How much Ram in laptop? Available space on HDD?
 

http://www.techspot.com/community/topics/troubles-with-hp-officejet-5610-printer.186225/
Relevancy 49.88%

I'm trying to record some karaoke but every time I play back the recorded track, the music is "doubled" with a slight delay, as if the laptop's built-in microphone was picking up the music along with my voice. Here is an example:

http://www.singsnap.com/karaoke/watchandlisten/play/c58ef46c3

Notice how those staccato notes are doubled with that slight delay.

I'm using Windows 7 on a Dell laptop with Realtek.
Under Playback I have two devices: Loudspeaker (enabled) and Realtek Digital Output (disabled)
Under Recording I have: Microphone (enabled) and Stereomix (disabled)

I'm recording using headphones and the laptop's built-in microphone. This is what the Realtek Audio Manager looks like:

It's in German but most options are self-explanatory.

If you could help I'd be very grateful.

Thanks for reading.
 

http://www.techspot.com/community/topics/bleeding-when-trying-to-record-on-laptop.211024/
Relevancy 51.17%

I have been having this issue for about 2 weeks now. Ive literally tried everything including uninstalling/reinstalling network card, restore points (there are none), a windows update download, and reformatting the hard drive (wont let me). Any help is appreciated. I cant afford a new pc or any new hardware at this time.
 

A:"Failed to query TCP/IP settings of the connection. Cannot proceed."

failed to query tcp/ip settings of the connectionClick to expand...

what did you do when this occurred?

Describe network equipment {modem, router} ISP, and your system.

Connect it all together, get a command prompt, enter ipconfig /all >myTcp.txt
and come back here and paste the contents of myTcp.txt as your reply
 

http://www.techspot.com/community/topics/failed-to-query-tcp-ip-settings-of-the-connection-cannot-proceed.177223/
Relevancy 50.74%

Hi my daughter tried to adjust the resolution and now the screen is Black and stuck on Out Of Range. I cannot even get it safe mode or anything. Just a black screen with the writting. It's a windows xp 32. My son is so sad if anyone knows what to do please help. Thank you.
 

A:PC monitor screen is black & says "Out Of Range"

Repeatedly press F8 while the system is booting.. The very first stuff you see on screen will either be your motherboard splash screen or some text. When you get to the menu where you can make a selection, choose VGA mode NOT Safe Mode. That will boot your computer at 640x480, but it will boot with full driver support, just as if things were normal. Change the resolution to what you want after that.

Remember if you change it to something that goes 'out of range' DO NOT touch anything for 15 seconds. It will revert back to what it was after that time and you can try again.

Unrelated.. Go to school at UMR? or different Miner?
 

http://www.techspot.com/community/topics/pc-monitor-screen-is-black-says-out-of-range.210867/
Relevancy 35.26%

Recently my Gbps has taken a serious nosedive I was around Gbps then it dropped dl Adapter 0.84Gbps Network The other computers on the network are getting Network Adapter 0.84Gbps dl great speeds it s just my computer My computer is running fine It s just the connection speeds This isn t just happening on WI-fi it s also happening when I plug in the Ethernet cord My network adapters are Broadcom n Network Adapter Microsoft Kernel Debug Network Adapter Qualcomm Atheros AR PC-E Gigabit Ethernet Controller NDIS They are all up to date And I use Avast internet security Also I ve cleaned the cache in both firefox and chrome browsers I ve also removed all but add block add-ons I m using AARIS modum router through time warner cable And again the Network Adapter 0.84Gbps dl other computers are getting great speeds always up of Gbps I even checked my Mom brand new computer which is getting upwards of Gbps I ve called TWC they sent someone the wires were a bit loose and it fixed everyone s laptop but mine Please help I m clueless here Here is the Broadcom n Network Adapter settings - auto mhz - Disabled n Preamble - Auto Antenna Diversity - Auto AP Compatibility Mode - Higher performance Bandwidth capability - b g MHz Bluetooth Collaboration - Auto BSS PLCP Header - Auto Short Long BT-AMP - Enabled Disable Uon Wired Connect - Disabled Fragmentation Threshold - IBSS g tm Protection Mode - Auto IBSS Mode - b Only Locally Administered MAC Adress - not present Minimum Power Consumption - Enabled Mixed Cell Support - Disabled Power Output - Priority amp VLAN - Prioroity amp Vlan Disabled Rate - Best Rate Roam Tendency - Auto Roaming Decision - Auto RTS Threshold - Shorti GI - Auto WMM - Enabled WZC IBSS Chaneel Number - MHz XPress TM Technology - Disabled nbsp

A:Network Adapter 0.84Gbps dl

Also I recently installed windows 8. I've tried all sorts of things to get it to work. Still no luck.
 

http://www.techspot.com/community/topics/network-adapter-0-84gbps-dl.210602/
Relevancy 17.2%

Hey guys, I've just upgraded my 5 year old pc with almost everything new. I got an Asus Maximus VII Ranger & an i7-4790k cpu & other new stuff except my graphics card & ram, 2 x 8gb Hyper X Fury 1600mhz. What I don't understand is reading the manual about the speed of ram I can install.

4 x DIMM, Max. 32GB, DDR3 3200(O.C.)/3100(O.C.)/3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2500(O.C.)/2400(O.C.)/2200(O.C.)/2133(O.C.)/2000(O.C.)/1866(O.C.)/1600/1333 MHz Non-ECC, Un-buffered Memory *
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs.

I would like to install higher speed rams like 2400mhz or higher if possible (are there even 3000++ mhz ddr available? Looking at my local shop, 2400mhz ddr3 is the highest) without overclocking but I'm lost at the " (O.C) " bit. Do I need to overclock them to get at that speed or can I just get rams that are made at that speed? Thanks!
 

A:Need info on RAM to install on new mobo

The OC means you will need to OC your motherboard to use RAM rated at that speed. If you are not planning on OCing, just get the 1600/1333 Mhz modules.

BTW the average person would never notice the differences in RAM speeds. Memory is not the bottleneck in computing.
 

http://www.techspot.com/community/topics/need-info-on-ram-to-install-on-new-mobo.210150/
Relevancy 29.67%

I have an installation folder on my main machine(Windows 7) with all my software. I have repeatedly run into issues connecting odd devices to my shared folder. This time I have installed Windows 10 Technical Preview (on a different machine) and don't understand why it tells me I can't access my own machine. After all these years, you would think user friendly would be a reality. It seems to be a coin toss as to which machines will connect. I hate never knowing I can access my own machine without issue. Here I am trying to install applications but yet I can't get to my storage location.

What is the secret to sharing your machine, so that anyone on the same network can access shared folders?

Edit: I always turn on "Network Discovery" and "File and Print Sharing".
 

A:Network connection issues (year after year)

I'm more brutal via the firewall:

set trust localhost and your lan ip's, eg 192.168.0.1/24

then add two rules for only the PRIVATE PROFILE

inbound allow tcp/udp from 192.168.0.1/24 to any for ports 137-139,445
outbound allow tcp/udp from any to 192.168.0.1/24 for ports 137-139,445
I use a much more complicate scheme in reality to enforce known vs unknown devices and to segregate WiFI from wired access, but that's just me.

In services, ensure these are running

Bonjour Service ( mDNSResponder)
fdPHost
Network Connections
Network List Service
Network Location Awareness

 

http://www.techspot.com/community/topics/network-connection-issues-year-after-year.208880/
Relevancy 50.74%

For the past month, Nvidia has faced its fair share of bad PR thanks to the GeForce GTX 970's memory allocation issue. As has been uncovered by users and explained by Nvidia, the GTX 970's last 512 MB of VRAM...

Read more
 

A:Nvidia CEO says GTX 970 memory controversy "won't happen again"

Again: the performance didn't change overnight; it's today the same performance than the advertised on launch date. Even that technicality can kill the case. Specifications were the "misleading" part.
 

http://www.techspot.com/community/topics/nvidia-ceo-says-gtx-970-memory-controversy-wont-happen-again.209149/
Relevancy 51.6%

As you've probably heard by now, Nvidia is having a few issues with their GeForce GTX 970 graphics card. In response, AMD has lowered the price of the card's main competitor, the Radeon R9 290X, in an attempt to get...

Read more
 

A:AMD cuts Radeon R9 290X price amid GTX 970 "issues"

Meaning AMD could have been selling the card cheaper this whole time.

AMD needs to stand more firmly in their business decisions. Changing prices on a whim every time the wind blows, shows lack of confidence in their product to sell itself.
 

http://www.techspot.com/community/topics/amd-cuts-radeon-r9-290x-price-amid-gtx-970-issues.208450/
Relevancy 21.07%

Hopefully someone can answer this as im baffle, my computer will turn on and of with no problem as ling my printer is plug in but if printer cable unplug it won't turn on but if printer cable in plug in it will turn on but while the comptuer turn on and I unplug the printer cable it will shut down nothin making since but as long the printer is unplug it will not start or boot blank screen but printer plug in I can get to the boot or cmos screen please help Thanks

PS it a Dell PP17L Latitude
 

http://www.techspot.com/community/topics/pc-wont-turn-on-if-printer-not-plug-in.208502/
Relevancy 21.07%

Hello. I speak English a little. Therefore, I can do a lot of errors in my sentence but I hope for understanding.
Please, help me fint out the schematic diagram for the printer Samsung ML-216*.. Or who has it?
Thank you so much and have a nice day!
 

A:Looking for the schematic diagram for the printer Samsung ML-216*

dnshulga said:





Hello. I speak English a little. Therefore, I can do a lot of errors in my sentence but I hope for understanding.
Please, help me fint out the schematic diagram for the printer Samsung ML-216*.. Or who has it?
Thank you so much and have a nice day!Click to expand...

No guarantee, but see if this will help http://www.manualslib.com/manual/201828/Samsung-Ml-2165.html?page=3#manual
 

http://www.techspot.com/community/topics/looking-for-the-schematic-diagram-for-the-printer-samsung-ml-216.208342/
Relevancy 21.07%

Hi,

Can someone please recommend me a colour laser printer for home use? Resolution should be at least 1200 x 1200 dpi. The option to print both sides of the paper would be nice. Multiple paper trays not necessary, nor anything else that will add unnecessary bulk to its size. There should also be connection for Ethernet and USB. Preferable that it uses separate toner cartridges for the different colours, so if one colour runs out then only that colour needs changing rather than the whole lot.

Thanks.
 

A:Recommend me a laser colour printer please

You realize these are very expensive to both purchase and on a cost/page.
 

http://www.techspot.com/community/topics/recommend-me-a-laser-colour-printer-please.207641/
Relevancy 35.26%

So this thread is probably going to have a lot of information on it Timeouts Other Network Issues & but please don Timeouts & Other Network Issues t be discouraged I really really need help with some issues I ve been having and if someone could solve this for me that would be amazing So I ve been experiencing timeouts It seems I get timeouts whenever using Timeouts & Other Network Issues some sort of wired connection If I used an ethernet cable connected to my router I would get timeouts in several applications such as Minecraft and Teamspeak If I used Wireless I was fine So after lots of troubleshooting I couldn t find a fix so I ve been using Wireless ever since Lately however my wireless has been unusually slow not for everyone in the house just for me So what I did to solve the issue is I setup a D-Link DIR in my room to act as a Wireless Access Point I now get slightly faster speeds and bar connection rather than the bars I was getting previously Now I thought I wouldn t get these stupid timeout errors when connecting to this Wireless Timeouts & Other Network Issues Access Point turns out I still do On Teamspeak for example I will be talking to people and everything will be completely normal I won t lag or anything and then BOOM I get disconnected As I said no lag no warning I just get disconnected It s almost as though my router is randomly cutting me off So what I thought I d do was replace my primary router BoB Lite with the D-Link DIR and then use Wired connection because I assumed that the BoB Lite was causing the timeout issues Now I can t even connect to anything wired I must have changed a setting when troubleshooting or something But now I can t source internet from my laptop ICS and I can t connect to my original or new router wired The only way I can currently get internet is by using the DIR in my room but I still get timeouts when using applications such as Minecraft and Teamspeak So yeah multiple issues Firstly if I could just solve the timeouts then that would solve everything I could continue connecting to the modem in my room and everything would be fine OR is there a way I could someone reset all my network settings that I may have messed up when troubleshooting As I can no longer connect to any modem with a wired connection not even the DIR which could have solved the problem If anyone could help me out that would be GREATLY appreciated This is a really annoying issue and I ve tried to troubleshoot it myself for ages now but with no luck IF anything in this thread doesn t make sense to you please tell me and I ll gladly explain myself Additional Summarised Information My primary router is a BoB Lite my ISP is iiNet The modem in my room is a D-Link DIR I m using a NetComm N USB Adapter to connect to Wi-Fi I m using Windows Ultimate -bit Thanks very much Innug nbsp

A:Timeouts & Other Network Issues

Get a command prompt
enter PING 8.8.8.8

does that timeout or return timing values?
 

http://www.techspot.com/community/topics/timeouts-other-network-issues.207544/
Relevancy 51.6%

I have a mystery on my hands. I received a Bluetooth speaker as a gift. The BT-4.0 adapter plugged into my computer (USB-2.0 port) detects it (as a "Bluetooth headset"), but when I try to select it as my output device (from the "Sound" Control Panel), Windows reports it as "Disconnected".

If I open "Devices and Printers" and right-click the "Bluetooth headset" icon, I get an alert that the device "Failed to initialize".

I've tried rebooting, tried a different BT adapter, updated my BT drivers off the makers' website, Device Manager shows everything is connected & working (including "Bluetooth Audio").

64bit Win7 Home. Inateck BT-4.0 usb adapter. Speaker is a "MicroBoom" BT v2.1:
Any ideas?

PS: Eliminated the obvious. Speaker is fully charged and works just fine with my phone.
 

http://www.techspot.com/community/topics/bluetooth-headphones-paired-but-disconnected-failed-to-initialize.207624/
Relevancy 21.07%

This ink cartridge http://www.epson.com/cgi-bin/Store/jsp/Product.do?BV_UseBVCookie=yes&sku=T048120[1]

Is labelled as "T048120-S" on some online stores... others it's labeled just as "T048120"

What does the "-S" mean? single cartidge?
 

A:Question about Epson printer ink model #

Probably means standard capacity.
 

http://www.techspot.com/community/topics/question-about-epson-printer-ink-model.207580/
Relevancy 51.6%

Hello It may seem like a simple problem but I know nothing of the subject and I ve had the problem for ages Whenever I copy large files Movie size think MB the copy progresses very remaining" drives "5 sec Copying to/from stuck before for flash on 30 finishing seconds fast MB s until it reaches about where it gets stuck for about seconds to a minute and it says quot Time remaining seconds quot during all that time I have this problem with any flash drive in any USB port amp It also happens when copying to network drives and external harddrives which leads me to think it s a software windows issue Some vital information Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing The flash drive I mainly use is USB quite new and easily capable of MB s writing speeds It reaches about - MB s during the copy until the final point where it still says MB s but does nothing for seconds USB port is also and I ve also tried every single other port in my computer None are broken and none ever show any signs of being slow The flash drive is NTFS formatted but it used to be FAT I ran checkdisk to see if there was anything wrong but there wasn t It s NTFS since I occasionally need files gt GB I tried using TeraCopy to bypass the issue but this way doesn t reach speeds of over MB s which takes even longer in the end It does fix the hanging at issue I tried converting the drive back to FAT which removes the issue of it hanging at but again the speed doesn t go above MB s which means it takes longer in the end making it not worth it What bothers me is that the files transfer at the maximum speed right until the very end where it just magically gets stuck for seconds or more before finishing like nothing happened Please advise P S I shamefully have to admit I never safely remove my hardware nbsp

A:Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing

Marty9231 said:





Hello!

It may seem like a simple problem, but I know nothing of the subject and I've had the problem for ages.

Whenever I copy large files (Movie size, think 700MB+), the copy progresses very fast (~100MB/s) until it reaches about 99% where it gets stuck for about 30 seconds to a minute, and it says "Time remaining: 5 seconds" during all that time.

I have this problem with any flash drive, in any USB port (2 & 3). It also happens when copying to network drives and external harddrives, which leads me to think it's a software/windows issue.

Some vital information:

The flash drive I mainly use is USB 3.0, quite new and easily capable of ~150MB/s writing speeds. It reaches about 120-130 MB/s during the copy until the final point where it still says 130 MB/s but does nothing for 30 seconds.

USB port is also 3.0, and I've also tried every single other port in my computer. None are broken, and none ever show any signs of being slow.

The flash drive is NTFS formatted, but it used to be FAT32. I ran checkdisk to see if there was anything wrong, but there wasn't. It's NTFS since I occasionally need files >4GB.

I tried using TeraCopy to bypass the issue, but this way doesn't reach speeds of over 20MB/s which takes even longer in the end. It does fix the 'hanging at 99% issue'.

I tried converting the drive back to FAT32, which removes the issue of it hanging at 99%, but again the speed doesn't go above 20MB/s which means it takes longer in the end, making it not worth it.

What bothers me is that the files transfer at the maximum speed right until the very end, where it just magically gets stuck for 30 seconds or more, before finishing like nothing happened.

Please advise!!

P.S.: I shamefully have to admit I never safely remove my hardware. Click to expand...

Although I've had the same happen on my downloads, this "P.S.: I shamefully have to admit I never safely remove my hardware." could be part of the problem, good luck.
 

http://www.techspot.com/community/topics/copying-to-from-flash-drives-stuck-on-5-seconds-remaining-for-30-sec-before-finishing.207001/
Relevancy 35.26%

I was watching a tv show on nbc on my dell inspirion when I lost Wi-Fi. I checked and I had no signal and it wasn't even showing any available networks. I called dell and they ran me through a diagnostics. But once they saw my McAfee was expired and I wasn't paying extra for tech support they wouldn't help. Now it's not even showing Wi-Fi in my network connections just Ethernet. Please help
 

A:No Wi-Fi listed in network settings

IMO, McAffee isn't worth $$; ditch it and get WiFi running again.

THEN, choose { Avast or AVG } as your A/V product, DL & install.
 

http://www.techspot.com/community/topics/no-wi-fi-listed-in-network-settings.206899/
Relevancy 16.34%

Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp

A:Clean install Windows 7 - FN Keys (Touch/slider) not working

Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.

That'll teach you to mess with Windows when a cd/dvd plays up.
 

http://www.techspot.com/community/topics/clean-install-windows-7-fn-keys-touch-slider-not-working.207046/
Relevancy 35.69%

Hi Guys,
Recently my laptop keeps disconnecting from the wi-fi and I get an error saying unidentified network, I try to troubleshoot, it tries to reset the wireless network adapter and then the computer freezes. After I reset the laptop the problem can happen again within a couple of minutes. The driver software is fully up to date and I have no idea what else I can do. It is an Acer Aspire 5750G running Windows 7. Please help it's making my laptop almost completely unusable
 

A:Unidentified Network

Have you tried a wired connection does that work any better?
 

http://www.techspot.com/community/topics/unidentified-network.206848/
Relevancy 33.97%

I bought a ADSL Modem D-Link 2730U

We are connecting to the Modem via Laptop, PC, Phone,... at the same time.

I want to know how can I monitor network(Receive/Send) for each user who connected to the Modem.

Can I do such thing?
 

http://www.techspot.com/community/topics/monitoring-network-for-each-user-connected-to-adsl-router-modem.206910/
Relevancy 35.26%

My wireless is not working on my computer, just a couple months ago I reset my computer using the ISO file, now my computer will only connect to the Ethernet cable. The wireless switch is on. I see a button near the VAIO button that shows a computer with signals coming off of it, I've tried pressing it but it doesn't do anything. Computer specs: VAIO Song Laptop with 6 GB Ram and 1 TB HDD.
 

A:Wireless network not working

Sounds like when you reset your computer the proper wireless drivers were not re-installed. I would start looking for a solution for this. What Operating System does it have (Windows 7 / Windows 8.1/ etc.)? Have you tried to remove the Wireless drivers and re-install those? How about downloading and installing updated drivers from the VAIO website?
 

http://www.techspot.com/community/topics/wireless-network-not-working.206511/
Relevancy 35.26%

Hi. This is my first post on this forum.

I would like to ask some help regarding a problem with my internet connection. Connecting our separate PC and my Laptop to my LAN works perfectly fine but when I use our wireless network to connect my laptop and phone, that's when the problem occurs. I tried rebooting the router (unplugging the power switch, cables and such). And I also tried rebooting my phone and laptop but nothing works. I also tried looking at the router settings and tried changing the security settings to none to see if I can connect but still cant.
I just don't know what the problem is. Can you help me?
Thank you.
 

A:Can connect to LAN but not on wireless network

Hey strings12. A bit more info on your equipment would be helpful.
1) What is the OS (Operating System) and Service Pack Level of your laptop, SP1,2,3 ?. rIght click on My Computer icon and select Properties
2) Are we talking about one laptop here?
3)Is your router secured and what encryption method are you using, WEP,WPA or WPA2
 

http://www.techspot.com/community/topics/can-connect-to-lan-but-not-on-wireless-network.198872/
Relevancy 51.6%

Please help.. Can't connect to the wifi but using ethernet is working fine.. My phone could connect to the same wifi though
tried to backread some of the threads but didn't work on my laptop
 

A:Cannot "fully" connect to wifi but works fine on ethernet

Additional info. I am using Atheros AR5006EXS Wireless Network Adapter
and I did deleted the driver and it installed again automatically, but sadly it still doesn't work
 

http://www.techspot.com/community/topics/cannot-fully-connect-to-wifi-but-works-fine-on-ethernet.206650/
Relevancy 50.74%

I've been having an issue which started this morning. The previous night, I forgot to plug in my Dell Inspiron N5050 after using it. I woke up to find that my battery had died (obviously). I plugged in the laptop, running Windows 7 HE 64 bit, and turned it on. It booted normally and I was able to do all of my tasks as needed. Then I noticed my problem. The battery icon down on the taskbar showed that the device was plugged in, but was not charging. It has stayed at a constant 2% charge for more than 24 hours now. The Battery Meter stated that my battery is performing normally, so I ruled the battery out as the cause. The adapter I am using is the default one that came with the laptop when I bought it, and it appears to be functioning normally as well. What could be the cause of this incident, and what can I do to fix it?
 

A:Battery Stated as "Plugged in, Not Charging"

Most likely you have a bad battery. Dell has had whole series of batteries that they shipped out in a not fully functional state. I have an HP laptop (about 8 years old now) that the battery took a "steamy one" and it will no longer charge properly. You can try this trick (it may not work, but worth a try because did work for me a couple times): power down laptop and take the battery out for 30 minutes; replace battery and plug in charger but do not power on; wait 4 hours of charge and power on. I had it work a couple times that it gave a full 100% charge. Again, if it doesn't work then sorry, but at least you tried.
 

http://www.techspot.com/community/topics/battery-stated-as-plugged-in-not-charging.203683/
Relevancy 49.88%

I used RV042 10/100 4-Port VPN Router. I've configured the dual WAN, and enable Load Balancing for faster internet. But if I accessedhttp://ipchicken.com/ my IP Address is always chaging? How can I setup the router sticking to just one IP address?
 

A:How to "Load Balance" without changing the IP?

Let me preface by saying....taking two circuits and using them at the same time, even with protocol management from the LB is most likely not worth the effort.

But for the sake of the argument, the first hurdle you have is that both circuits need to have static IPs. What type of connections are they?
 

http://www.techspot.com/community/topics/how-to-load-balance-without-changing-the-ip.205897/
Relevancy 34.4%

jobeard Hi jobeard In the beginning of the month you seemed to have solved this issue http www techspot com community topics internet-connection-through-ethernet-but-not-wifi You or someone else might be a great help for me as well since I have a similar issue At home I don t have access to wifi it says limited access although the internet is working fine by an ethernet cable at home In addition I do have access to wifi at work or in public places like a hotel I have already browsed the web but I still cannot figure it out An TCP wifi Limited but at home, other acces not places at IP Limited wifi acces at home, but not at other places reset did not work the drivers of my wifi adapter Limited wifi acces at home, but not at other places should be fine My system information - HP Elitebook - Windows Enterprise Edition bit - wifi router DrayTek Vigor AP this device acts as an access point that broadcasts wifi it is not the actual modem If you have any advice for me please let me know it is strange that I only have this wifi probem Is it maybe because there is an homegroup actually I don t know whether there is one Is it maybe because of the AV program I have McAffee but since it this the laptop from work I can t uninstall it I really don t know anymore I have included files with the output of the commands IPCONFIG ALL and ROUTE PRINT Thank you in advance nbsp

A:Limited wifi acces at home, but not at other places

Hello maarten747 ,

As far as I can see from the ipconfig output your laptop doesn't seem to obtain IP address.
You could try configuring one manually to test this theory. Something like: IP address 192.168.1.128, Subnet mask: 255.255.255.0, Gateway: 192.168.1.1, DNS1: 192.168.1.1, DNS2: 8.8.8.8 . Just keep in mind that the details listed here are just a guess as I'm not fully aware of the specifics of your home network and a static IP configuration for the wifi adapter is not a good idea actually, so once done testing change it back to obtain IP address automatically.

Also in what wireless operation mode is your DrayTek configured?
Do you have any other wireless devices that are connecting to the same DrayTek ?
When you connect your laptop with ethernet cable, is the ethernet cable connected to the same DrayTek or a different device?
 

http://www.techspot.com/community/topics/limited-wifi-acces-at-home-but-not-at-other-places.205603/
Relevancy 34.83%

Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.
 

A:Dell 27" 5K Monitor

VitalyT said:





Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.Click to expand...

And I thought 4K was crazy high resolution already xD.
 

http://www.techspot.com/community/topics/dell-27-5k-monitor.205015/
Relevancy 34.4%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 17.2%

I decided to upgrade my old hard drive to a new hard drive. When I tried to install Windows Xp on the hard drive it wouldn't let me. I have a Dell Xps 400 bought back in 2006.
The new HD is a WE 1tb. The error codes comes when I try to install windows xp on the hd. It says

I got a blue screen error after clicking enter at the screen where there is no partition found:
Check to be sure you have adequate diskspace. If a driver is identified in the stop message, disable the driver or check with manufacturer for driver updates. Try changing video adaptors.

Check with your hardware vendor for any bios updates. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components. Restart your computer, press f8 to select advanced startup options, and select safe mode.

Technical information:

Stop:0x0000008E (0X0000005, 0XF7419CAD, 0XF6FF17E4, 0X00000000)

Setupdd.sys ? address f7419cad base at F73ED000, datastamp 48025277
 

http://www.techspot.com/community/topics/error-on-trying-to-install-new-sata-hd.204857/
Relevancy 34.4%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 48.16%

Hi, when I typed " dxdiag " it said n/a, last time I checked there was something written in it..
 

A:When I typed " dxdiag " it said n/a

Check your graphics drivers and install the latest one.
 

http://www.techspot.com/community/topics/when-i-typed-dxdiag-it-said-n-a.204746/
Relevancy 16.77%

I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
 

http://www.techspot.com/community/topics/trying-to-install-nvidia-quadro-nvs-259-on-windows-7.204678/
Relevancy 34.83%

My sister's 13" MBP (2011) died a few hours ago. According to what she told me, she was using it, and then, poof, black screen and no power. She doesn't have the cash at the moment to have it properly checked by a tech, so I did a basic troubleshoot in an attempt to narrow things down.

While the internals are a bit dirty, I didn't see any obvious signs of physical damage (it was relevant to check for this). Furthermore, the machine doesn't seem to respond to any power sources. I tried a couple different power cables and, while the little amber light on the magsafe (sp?) tab will come on briefly, the computer with neither power on nor display a charge on the built-in charge indicator. I will also note that the machine failed while disconnected from an outlet source with a full battery indicated.

My initial conclusions are a) the computer fried itself or b) the battery is toast. Any suggestions?
 

A:2011 MBP 13" Won't Power Up

If no one here can offer any insight, I would post this to the Apple discussion forum. There are usually people there that can diagnose this from just a description so that is your best bet.
 

http://www.techspot.com/community/topics/2011-mbp-13-wont-power-up.204013/
Relevancy 35.26%

Sorry for that long title. Anyway, I was watching some YouTube videos when my wi-fi suddenly stopped worked. With this, I don't mean that I'm not catching signal from my router. I mean that my computer isn't receiving signal from any network. I don't know anyway to fix this, it never happened. I also won't buy a new computer. I got this on Christmas and I think that 7 months isn't that old. Also, the only tutorial I found doesn't applies to my computer (It was for a mac ). I have no idea of how to fix this and if you know, PLEASE HELP ME!!!!!! (If you are curious of how I am posting this, it works with Ethernet connection)
It's an ASUS computer with Windows 8.
 

A:My Computer Isn't getting signal from any Wi-Fi Network

Give the following a try and see if it helps:
Go to network sharing center - change adapter setting - click on wifi and then Diagnose this connection.

If this does not help, please let us know and we can suggest something else to try.
 

http://www.techspot.com/community/topics/my-computer-isnt-getting-signal-from-any-wi-fi-network.203822/
Relevancy 34.4%

I'm wondering whether I can overclock my ASUS R500VD notebook it has an INTEL sandy bridge core I5 3210M 2.50 GHz processor 4GB (max 8) of ram running puppy linux and windows xp home edition SP2 32 bit I have benchmarked it and ill email the results to anyone who replys and gives me their email and if you're wondering why I'm running windows xp read my article in the Alternative OS section of the forums called "If all else is too hard try puppy linux" bye
 

A:Can I overclock my asus notebook 17"

Nope sorry, the I5 3210M isn't OC enabled.
 

http://www.techspot.com/community/topics/can-i-overclock-my-asus-notebook-17.202019/
Relevancy 34.83%

Hi all,
I have an Acer Aspire Z5610 AIO computer.When I first bought it a few years back the @ and " were transposed.Hit the @ and " would come up and vice versa.At the time I contacted someone (can't remember who) and with their advice I was able to correct the problem.Due to age the PC was running v.slowly,painfully so.I decide to revert back to Factory default settings,unwisely it turns out,but the old problem of @ and " transposition is back.Has anyone out there got a solution to this problem.It is fixable as I have done it before,but how !!!
Thanks in advance,
Frank.
 

A:Keyboard @ and" are transposed

It's not really a problem particularly as you know which keys to press to get @ or ". This is one of the few differences between UK and US keyboard layouts. You can change the English language version from one of the options in Control Panel.
 

http://www.techspot.com/community/topics/keyboard-and-are-transposed.203000/
Relevancy 34.4%

I have a HP 650 notebook that is in ok condition with Windows 8 OS. It uses a Ralink 3290 wireless adapter for my wi-fi needs. For the past three months, my adapter has been vanishing! I look at the indicator in my bar, and it shows no device available. I open up the Network and sharing Center and select the change adapter settings, and the only thing showing is an ethernet connection that I don't use. I can sometimes get the adapter to return by using the find and fix devices option on the search menu, but sometimes even that doesn't work. I've even been getting the "This device cannot find enough free resources (code 12)" message for the Ralink PCIe from the troubleshooter. while I did see an article on this elsewhere, I had some trouble understanding it. Can anyone help me figure out why this is happening to my laptop? Thanks for any help you can provide.
 

A:Vanishing Network adapter and resuorce problem

You might need to update and install the laptops chipset drivers. And also try to update the driver for your wireless adapter from the manufactures site or from the HP support page.
 

http://www.techspot.com/community/topics/vanishing-network-adapter-and-resuorce-problem.203293/
Relevancy 33.97%

I have an internet connection that I have extended to my Brother in law's house, next door. At the moment, I basically have two LAN cables coming out of my modem/router, one going to my computer and another, extended cable, going to his computer.
However, he wants to use his spare modem/router, which has wifi capability, to allow his son to use his own computer downstair with only wifi.
Therefore, will there be any conflicts if I simply splice in a Lan cable or add a lan socket for the second modem/router (wifi location.) at the appropriate point along Lan cable 2? See diagram below.
If there is a possibility of conflict what would be an alternate wiring method?

Thanks,
Tom.
 

A:Adding extra wifi (modem/router) to my already extended network

Good drawing and this will work just fine. In fact, that's what I use to get access at the far end of the house. Here's the trick;

router#1(lan slot) ---- (lan slot) router#2 with wifi​
Notice that #2 WAN slot is left empty! This places all systems on the same subnet of the router#1 {what you are doing is making router#2 act like a switch which has wifi support (y) }

* Give router# a unique LAN address (If #1 is 192.168.1.1, then make #2 192.168.1.1) This will allow each to be manage via a browser connection
* in router#2 disable DHCP. This forces #1 to be the manager of the entire network and it will handout all IP addresses
Personally, I use the MAC addresses of my devices to enable router#1 to use Address Reservation of IP address for all devices attached to #1 (ie I map the devices to the range 1.2-> 1.10)

Then set the DHCP range in #1 to 1.100-1.50
These will be used for all devices attached (wired or wifi) to #2

Optional:
All systems can then use the firewall to allow or deny access for one or both halves of the network. EG: I permit access for 1-10 and 255 while denying 100-254​ALL system must allow the top-end address 255 as that is the broadcast address that is used to hand out the DHCP data.
 

http://www.techspot.com/community/topics/adding-extra-wifi-modem-router-to-my-already-extended-network.203204/
Relevancy 66.22%

I am in an office building with 40 or so tenants. The entire building is wired to one central network (let's call it main network) controlled by SonicWall where each office has one live network drop. The main network is set up in such a way that tenants can plug in their own switches and routers if they want more network connected devices in their office. The office building has a network printer connected to main network where tenants can print to it. However, when tenants have their own routers in their office you cannot really connect to the network printer that is connected to main network. Is there something I can port, bridge or set-up where they can print to it?
 

A:Printing to network printer on another network

I think that as long as the tenant's router is connected to the main network they should still be able to access that printer provided that the WAN IP address of their routers is within the IP range of the main network where the Network printer is attached.
 

http://www.techspot.com/community/topics/printing-to-network-printer-on-another-network.203071/
Relevancy 21.07%

As the title says I'm trying to connect my HP3050 printer to my computer wirelessly. Problem is I get this:


The story goes that in the past week or so we swapped to a different internet provider and have swapped out the old modem/router for one that the new company has provided.
Prior to this no problems at all.

How do I counter this, I.e. remove the problem of what appears to be the availability of two routers, the new and the old?

Thanks,
Tom.
 

http://www.techspot.com/community/topics/unable-to-connect-my-hp3050-printer-wirelessly.202822/
Relevancy 16.77%

Hello all,

I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:

"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.

Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.

Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .

Can anyone please help me with this issue?

Regards,
Adrian
 

A:HP Pavilion 15-n252sq - Can not install Windows over Free Dos

You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
 

http://www.techspot.com/community/topics/hp-pavilion-15-n252sq-can-not-install-windows-over-free-dos.202523/
Relevancy 34.4%

Greetings my fellow technologists I have routers and internet connection and want to set up a second wireless network using the Dual 1 Internet Creation with connection Network DDWRT same internet connection for VPN purposes The routers are Router A TPLink TL-WR N non DD WRT flashed Router B Linksys E DD WRT flashed Router A is connected directly to my company s network and works fine broadcasting DDWRT Dual Network Creation with 1 Internet connection its own wireless network BENMAO BENMAO s Router A configuration settings are below LAN IP LAN MAC BC-D - - - - A WAN MAC SAME WAN IP WAN SUBNET WAN GATEWAY WAN DNS I have connected Router B to Router A via Ethernet cable Port on Router A to INTERNET port on DDWRT Router B but get no internet access on Router B using DHCP with Automatic settings I am willing to change any settings and experiment to produce connectivity on the second network BENMAOVPN but don t know what to change in the protocol settings and there is very little information on Internet DDWRT forums It seems there are multiple DHCP DNS and IP conflict issues which I don t really have a good grasp of here The DDWRT router Router B is highly customizable but I admit I don t know whether to set is as an Access Point Client Bridge Bridge Repeater or Ad Hoc but I know I do NOT want to quot cascade quot the routers into wireless network Also Router B probably needs to be set to function as a Router rather than a Gateway When I replace Router A with Router B its just plug and play everything works fine and I can actually put all my devices on a wireless VPN so setting up the wireless VPN is not the issue its just getting Router B to accept the signal from Router A So bottom line is I need to know how to set Routers A amp B to share the Internet signal from Router A to Router B and then have Router B broadcasting a DIFFERENT network Thanks for any help in advance nbsp

http://www.techspot.com/community/topics/ddwrt-dual-network-creation-with-1-internet-connection.202411/
Relevancy 21.07%

My dad was putting some paper into his printer and had apparently put the paper in too far. When he tried to print something it jammed up and the printer had abruptly shut off. I have tried leaving it unplugged for a while and plugging it back in however, the printer WILL NOT turn back on at all.
 

http://www.techspot.com/community/topics/dell-3510-printer-issue.202348/
Relevancy 51.6%

Hi I have an older PC which I gave to my mum It originally ran Vista but I bought and installed Windows Ultimate around weeks ago after it had been inactive for months It was running great but a couple of weeks ago it just started hanging for no real reason Also at startup it would say that the computer had not been shut down properly even if it had This was only when it was switched off at the wall not after checksum defaults loaded" replaced error battery after - "cmos a restart or when the PC was left plugged in and switched on She only "cmos checksum error - defaults loaded" after battery replaced uses the PC to look at You Tube and some webcams from her grandkids and that s it she s not very computer literate Initially I left Windows repair to run overnight but when I looked at it the following morning it was still in the repair screen so I assume it had hung I spoke to a local repair shop and they suggested I test the RAM test the hard drive and replace the CMOS battery The RAM and hard drive checks went without any errors and after I replaced the battery the hanging stopped I played with the computer all evening and shut it down as normal and switched it off at the wall Next day I thought I would start it up just to check it and I was faced with a quot cmos checksum error - defaults loaded quot message I thought that was strange but maybe the battery was dead so I swapped it over with one from my perfectly working desktop to try it out and my desktop worked fine but after shutting down my mum s one it had the same problem when power was pulled So battery was ruled out Incidentally I will say that I reset the BIOS date and time every time I was faced with the error following up with a save and exit It worked fine until I unplugged the computer I then moved on to the BIOS and set it back to default and the same again After this opened the case and used the jumpers to reset the BIOS to default again but no difference My mum will not leave it switched on at the wall constantly in case it self-combusts same with her washing machine TV lamps etc otherwise I would just do that and ignore it Is there anything else someone can suggest that I try System Shop bought by Mesh Motherboard is an ASUS PSN-E SLI gb Ram - samsung gb hard drive - ASUS Thanks for any help nbsp

A:"cmos checksum error - defaults loaded" after battery replaced

I must add that the PC is the same as when I bought it new from the shop, except for adding a Creative Labs sound card (approx 2012) and installing Windows 7 (around 6 weeks ago). All Windows updates are downloaded and installed.
 

http://www.techspot.com/community/topics/cmos-checksum-error-defaults-loaded-after-battery-replaced.201304/
Relevancy 50.74%

My dell 1905fp finally crashed after a lot of years. I'm not a gamer, but I was very happy with that monitor.

Of course they no longer make it, and I understand refurbished monitors of this type are not necessarily a good option.

I can't seem to find reviews or comparisons which point the way to other similar monitors. I'm retired and just can't afford the $600 and way up price of what I've seen so far.

I just need a basic monitor with VGA and DVI, but would like the screen performance to be decent, incl for watching movies etc.

Any recommendations, and where to get a reasonable price? Again, don't want a wide screen.

Thanks much!
 

A:Reasonably priced 19" or 20" monitor, not wide-screen?

Nothing wrong with buying refurbs. They may have a few blemishes in the frame but nothing serious to keep them from functioning. I've bought a few myself and have had no issues with them. Although the monitors I bought were 20" widescreens that averaged $120 or less. For what you need/want, I wouldn't spend more than $150.

I know you said no widescreen, but movies do view better on widescreen.

http://www.amazon.com/Dell-UltraSharp-1905FP-Rotating-Landscape/dp/B00091R6KC - less than $100
 

http://www.techspot.com/community/topics/reasonably-priced-19-or-20-monitor-not-wide-screen.201641/
Relevancy 33.11%

I have networked PCs before many times successfully so this is not my first time trying to network PCs in a home environment Though I m wondering if Windows is part of the problem I would have thought that for sure until one of the name credentials bad password? user with unknown even correct failure: or "Logon new laptops running W would not connect to any of the other three PCs Laptops running W Yet these other three W PCs Laptops CAN connect to this laptop Then it gets a little more "Logon failure: unknown user name or bad password? even with correct credentials interesting this same laptop that couldn t connect to those three W PCs Laptops CAN connect to a Windows desktop and a XP Laptop and those two can also connect back to it without issue It s almost like my network is divided in half and only half can talk to each other But then when I thought it couldn t get any more interesting I realized the first three W PCs Laptops can talk to the others it s just that the others W Laptop W Desktop XP Laptop can t talk back to them without getting the error quot Logon failure unknown user name or bad password even though the username and password are correct I don t fully understand this error because on the surface it s just WRONG My username and password are correct but it appears something somewhere is interfering or hijacking the authentication process Three of the computers laptops are brand new just purchased last week and setup this week The HostPC is also fairly new just purchased last month I am not using a HomeGroup and have removed all computers that were part of a HomeGroup I have enabled file sharing and network discovery and enabled Use user accounts and passwords to connect to other computers on all PCs I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it It is a Sagemcom Model F ST N All computers are connected wirelessly Time is correct on all PCs I cannot use Group Policy since they re all Standard or Home edition DHCP is enabled and all computers are on the same subnet using the x range of ip addresses The six computers are as follows I figured this may make is easier to visualize the layout HostPC HP Desktop W PC Name DrsBlend U N DrsBlend p w not showing my real password PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Desktop W SP PC Name DrsBlend- U N DrsBlend P W PC Dell Laptop XP SP PC Name DrsBlend- U N DrsBlend P W Every PC stated above has the same user name and password and is logged-in with the username DrsBlend and the password The quot Logon failure unknown user name or bad password happens when trying to access HostPC PC or PC from PC PC or PC The HostPC can see and connect to all the PCs but only PC and PC can talk back or access the HostPC It s like the HostPC and PC and PC are in their own little clique and can talk back and forth to each other Those three PCs can also talk to PC PC and PC as well but PC PC and PC cannot talk back to them HostPC PC PC Profile corruption I would have entertained that thought but the fact the first three PCs can access and talk to one another kind of defeats that idea and the fact the PCs were just recently setup Firewall Disabled and disabled TrendMicro with no change With them on off the first three PCs can still talk to each other and the rest of the PCs Anyone have any additional suggestions nbsp

A:"Logon failure: unknown user name or bad password” even with correct credentials

I experienced a similar problem when I was trying to network my 8.1 machine the host network. As you say the host PC can see and connect to all of the machines, but not the other way around. Not sure if it is the same in your situation but I found that Microsoft's idea of network sharing on the Windows 8 class of OS differs greatly from previous OS's in that you can connect to it from an external host, but when trying to do the other way around it doesn't "see" the PC in question due to differing network sharing protocols included in the OS.

Anyone feel free to correct me if I am wrong, I am speaking only from what happened with my network.
 

http://www.techspot.com/community/topics/logon-failure-unknown-user-name-or-bad-password%E2%80%9D-even-with-correct-credentials.201313/
Relevancy 33.97%

So newegg is offering the Acer 29" B6 B296CLbmlidprz IPS monitor for about 350. Seems like a pretty good deal but I can't find many reviews on it. I was wondering if anybody had any experience with this monitor and/or if you guys have better options for someone who is looking for an IPS monitor below 400 bucks. I want to game with it as well as do some 3d modeling and photoshop work. So I need reasonable response time for gaming. I was also looking at the HP ZR2440w and was gonna get that until I saw this deal on newegg for a larger monitor. 24" models are fine but if there are good deals on some 27" inch ones then I would be interested in those as well. Any suggestions? Thanks.
 

A:Question on Acer 29" monitor and other monitors

Heres the link for that monitor.
http://www.newegg.com/Product/Product.aspx?Item=9SIA24G1GC2421
 

http://www.techspot.com/community/topics/question-on-acer-29-monitor-and-other-monitors.201698/
Relevancy 35.26%

Hello, totally noob to phone networks. I am going to have a US version of Galaxy S5 and order an extra battery for it on mpj. Can I use both of them on overseas carriers? Thank you for any kindly help.
 

A:Can I use my phone on overseas network?

The specs shown here declare

Also known as Samsung GS 5
Available as:
Samsung SM-G900F - for Europe
Samsung SM-G900I - for Asia
Samsung SM-G900K/G900L/G900S - for Korea
Samsung SM-G900M - for Vodafone
Samsung SM-G900A - for AT&T
Samsung SM-G900T - for T-Mobile
Samsung SM-G900V - for Verizon
Samsung SM-G900R4 - for US Cellular
Samsung SM-G900P - for Sprint
​General 2G Network GSM 850 / 900 / 1800 / 1900


So yes, it is compatible with EU providers. Caution however; your current provider will bill you for roaming charges. When in Europe, I always buy a local SIM card and fund it with enough credit to last the trip - - that will also give you a local phone number. If you book theater events or need to call for reservations, they will be more likely to answer the phone.
 

http://www.techspot.com/community/topics/can-i-use-my-phone-on-overseas-network.201690/
Relevancy 17.2%

Hello all,

My friend has a Canon 3-in-1 MF 4010 (Printer-scaner and copier) device. He has lost the manual. Now, how can I see whether is it installed on the machine (Windows 7 32-bit) or not? And if it's not installed how to install it?
Thank you.
 

http://www.techspot.com/community/topics/how-to-install-the-canon-mf-40-10-3in1.201448/
Relevancy 34.4%

I ve read all I can about this online and tried everything I ve come across Since upgrading my internet same ISP the upload on my computer not any others on the network It ranges from megabits to If I boot into linux I get but that s far from the megabits the other Slow Problem: Bizzare Infuriating Upload Network computers on the network get But the strange thing is the problem seems to affect only certain programs My browsers are affected as the internet tests I do are from the browser OBS streaming software will not upload more then megabits about k However utorrent can completely max out my upload I ve tried stopping the WMI service and Bizzare Infuriating Network Problem: Slow Upload I have no traffic shaping software installed Here are my specs Operating System Windows Pro -bit CPU Intel Core i K GHz C Haswell nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard MSI Z -GD GAMING MS- SOCKET C Graphics SyncMaster x Hz LG TV x Hz MB NVIDIA GeForce GTX Gigabyte C Storage GB Samsung SSD EVO GB SSD C GB SanDisk SDSSDHP G SSD C GB TOSHIBA DT ACA SATA C GB Seagate Bizzare Infuriating Network Problem: Slow Upload ST DL - VT SATA C Optical Drives PIONEER DVD-RW DVR- L Audio ASUS Xonar DGX Audio Device Various Network info You are connected to the internet Connected through Killer e Gigabit Ethernet Controller NDIS IP Address Subnet mask Gateway server Preferred DNS server DHCP Enabled DHCP server External IP Address Adapter Type Ethernet NetBIOS over TCP IP Enabled via DHCP NETBIOS Node Type Hybrid node Link Speed Bps Computer Name NetBIOS Name CALVINS-PC DNS Name Calvins-PC Membership Part of workgroup Workgroup WORKGROUP Remote Desktop Disabled Console State Active Domain Calvins-PC WinInet Info LAN Connection Local system uses a local area network to connect to the Internet Local system has RAS to connect to the Internet Wi-Fi Info Wi-Fi not enabled WinHTTPInfo WinHTTPSessionProxyType No proxy Session Proxy Session Proxy Bypass Connect Retries Connect Timeout ms HTTP Version HTTP Max Connects Per Servers INFINITE Max Connects Per Servers INFINITE Max HTTP automatic redirects Max HTTP status continue Send Timeout ms IEProxy Auto Detect Yes IEProxy Auto Config IEProxy IEProxy Bypass Default Proxy Config Access Type No proxy Default Config Proxy Default Config Proxy Bypass Sharing and Discovery Network Discovery Enabled File and Printer Sharing Enabled File and printer sharing service Enabled Simple File Sharing Enabled Administrative Shares Enabled Network access Sharing and security model for local accounts Classic - local users authenticate as themselves Adapters List Killer e Gigabit Ethernet Controller NDIS Connection-specific DNS Suffix Home Connection Name Ethernet NetBIOS over TCPIP Yes DHCP enabled Yes MAC Address D - D- E-F - B- IP Address Subnet mask Gateway server DHCP DNS Server Network Shares Misc D Misc Finished Torrents D Downloads Finished Torrents Games D Games Games E Games Torrents E Downloads Torrents Video D Video Video E Video Current TCP Connections C Program Files x Google Chrome Application chrome exe C Program Files x NVIDIA Corporation Update Core NvBackend exe C Program Files Box Sync BoxSync exe C Program Files Hola app hola exe C Users Calvin AppData Roaming uTorrent uTorrent exe C Windows Explorer EXE G Program Files x Nightly firefox exe G Program Files x Razer Razer Game Booster main exe G Program Files x Samsung Magician Samsung Magician exe G Steam Steam exe hola svc exe hola updater exe KillerService exe lsass exe NvNetworkService exe nvstreamsvc exe services exe svchost exe svchost exe svchost exe System Process System Process wininit exe nbsp

A:Bizzare Infuriating Network Problem: Slow Upload

I figured it out, the Killer NIC on my Z87GD65 mobo was not compatible with NetLimiter. Uninstalling it fixed the problem
 

http://www.techspot.com/community/topics/bizzare-infuriating-network-problem-slow-upload.201410/
Relevancy 34.4%

Hello, I'm new here. I'm trying to fix my sons Asus laptop. it won't connect wirelessly but will connect via ethernet cable. device manager has exclamation point beside network controller. I cannot download drivers for it. can you help?
 

A:Asus X53E network controller issue/no wireless

"I cannot download drivers for it"... Why? Can you get the driver from here:
http://support.asus.com/download.aspx?SLanguage=en&p=3&s=114&m=X53E&os=&hashedid=mDFYFQWEpTitMwA6
If the driver won't install, the Wifi card may be bad... Something that doesn't happen very often
 

http://www.techspot.com/community/topics/asus-x53e-network-controller-issue-no-wireless.201175/
Relevancy 26.23%

Acomdata Model with WD AAJB drives installed System Dell Optiplex with Windows XP-Home Acomdata driver installed Two identical by computers different 4 recognized HD not case of IDE Acomdata 509 any New in cases and drives neither was recognized Objective to format these brand new IDE drives New IDE HD in Acomdata 509 case not recognized by any of 4 different computers Drive configured as Master Master with Slave New IDE HD in Acomdata 509 case not recognized by any of 4 different computers and Slave the only evidence of New IDE HD in Acomdata 509 case not recognized by any of 4 different computers movement of disk Pink light was when installed as slave As MASTER or Master w slave No pink LED at any time Reset as MASTER An identical second Acomdata box with a second new WD AAJB drive behaved exactly the same It was not recognized in the Dell Initially the Device Manager USB list showed a yellow warning for a USB Mass Storage Device Uninstall and reinstall hardware made no difference A subsequent repeat of uninstall reinstall caused the yellow warning to disappear When the drive was reinstalled a small screen popped up in the Notification area telling me that new hardware had been found My Computer Open - eventually showed H as well as W X Y Z the card readers At that time Device Mgr USB Mass Storage had no yellow warning any more Storage Disk Management did not show H at that point An internal inconsistency ----- When I tried to FORMAT from the OPEN drop down menu H was shown to be inaccessible Tried the Acomdata drive system on an iMac and two functioning Sony Vaio PCs running Windows None could see the external drive Microsoft and other sites had all the same ineffective directions for taking care of the Code Cannot start this device MS blamed it on a device in one place Nothing to do with a device No one mentioned anything about how the HD should be set up while Acomdata s instructions were to set it up as a Master which I did After spending several hours on this with these two new WD AAJB drives and two Acomdata cases no success --- Contacted WD support for help via E-mail They responded that they do not support the drives unless directly connected to the mother board I e they did not know or have any idea either Searching the Internet the problem shows up very frequently for many people regardless or PC make or Windows OS When I first acquired the Acomdata case it worked OK I actually installed Windows XP pro on it with some files That drive is not recognized either in that case any more Different PC nbsp

A:New IDE HD in Acomdata 509 case not recognized by any of 4 different computers

Addendum: One of the drives is in a 509 Combo case, so I tried the 1394/Firewire connection.
Result: with the 1394 connection, the PC hung up during booting at the Windows screen.
Checked the BIOS and it looked ok. Safe mode booted OK, but the drive was not visible in My Computer-->Open; Device Manger, or in My Computer--> Manage-->Disk Management.

There seems to be no way to recognize this case or its USB only 2nd unit.
I cannot believe that both Acomdata cases developed defects in storage.
 

http://www.techspot.com/community/topics/new-ide-hd-in-acomdata-509-case-not-recognized-by-any-of-4-different-computers.200984/
Relevancy 34.4%

We have a problem with the connection to our server. The server disconnects randomly from minutes to hours all day. I am at a remote location and connect via logmein to a local pc at the servers physical location to remotely control and connect to the server. A month or so ago the connection would drop every few minutes. The staff at that location replaced the switch and had the ISP tech check out the router. No problems were found. I think it is a problem with the server itself but don't know what it could be. Typically I can go through the login process and reconnect. I'm sorry I can't be more specific about the equipment since it is 40 miles away. Any suggestions on troubleshooting? Remotely?
Clearly I'm not a network guy.
Thanks for any help or direction
 

A:Network connection to server disconnects constantly

The usual suspects are:

(for DSL connections only) missing or faulty line filters
need to update the router/modem firmware at your end
packet reassembly overflow(a)
(a) very techie, but the solution is easy; see this description
 

http://www.techspot.com/community/topics/network-connection-to-server-disconnects-constantly.200706/
Relevancy 16.77%

I bought a Samsung 840 SSD (120GB) for my gigabyte GA-770T-USB3 motherboard. I am unable to install win 7 64bit on it. It is a SATA SSD.

I have tried ACHD mode in the BIOS, I have tried IDE mode. The drive works as I have tested it as an external drive on other computers.

I bought the drive specifically to be used as a primary drive.

My regular hard drives work fine on the motherboard.
 

A:Unable to install SSD on Win7 x64 system

Well, first of all, your motherboard only supports 3GB/s and the 840 is a 6GB/s drive. Just by that you won't really get your moneys worth. And how so are you unable to install? Also can you please list your system specs?
 

http://www.techspot.com/community/topics/unable-to-install-ssd-on-win7-x64-system.190141/
Relevancy 34.83%

When I am accessing wifi network I get dns failed error message. what is the problem? pls help
 

A:DNS failed error in WiFi network

Can you connect using a wired connection?
Get a command prompt and enter
ipconfig /all >myTCP.txt​then open that file, copy the contents and paste into your follow-up
 

http://www.techspot.com/community/topics/dns-failed-error-in-wifi-network.200577/
Relevancy 20.21%

I have a Xerox Phaser 3117 Laser Black and White Printer. When print, half of the paper come out to the out-put tray. Other half still in the fuser unit. Stop printing and red light indicate. When I check the print out, all details have printed. But, first row of my details have moved very top of my A4 paper.( Whole document moved 2-3 inches above[to the top of the paper]. What is this and how to resolve this problems( Paper Jam and document move to top of the sheet)????
 

A:Xerox Phaser 3117 laser black and white printer problem

chathura said:





I have a Xerox Phaser 3117 Laser Black and White Printer. When print, half of the paper come out to the out-put tray. Other half still in the fuser unit. Stop printing and red light indicate. When I check the print out, all details have printed. But, first row of my details have moved very top of my A4 paper.( Whole document moved 2-3 inches above[to the top of the paper]. What is this and how to resolve this problems( Paper Jam and document move to top of the sheet)????Click to expand...

what can I do
 

http://www.techspot.com/community/topics/xerox-phaser-3117-laser-black-and-white-printer-problem.196151/
Relevancy 51.17%

I just got new SSD - Transcend 128GB. Installed Windows. When I cold boot my PC -- from a shut off state -- I get this message before Windows loads: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."

However, if I press Ctrl+Alt+Delete and reboot I come into Windows.

If I enter BIOS from cold boot, it does not detect my SSD. After rebooting it detects my SSD. Seems like the SSD is slow at firing up?

I have run chkdsk and memory test without any errors.

My motherboard is the MSI Z87-G55.
 

A:"Reboot and select proper boot device"

Just installed newest BIOS, it didn't help.

When I go into Board Explorer in BIOS it says SATA port 1 is empty. After reboot it says the same port is occupied by my SSD.

Update: Plugged in another hard drive (non-SSD). Same rules apply to it. On cold boot, none of the drives are detected. After reboot, both drives are detected. I used a non-SSD as system drive before this, worked perfectly.
 

http://www.techspot.com/community/topics/reboot-and-select-proper-boot-device.200351/
Relevancy 21.5%

On a home network. My computer runs Windows 7 and this is the printer. I've never done this, but I would like to do it on my own (as much as possible ); I ant to learn how to set up network and share devices on it. If there's a tutorial somewhere about this, I would appreciate it very much.

Thanks fellas
 

A:Help me share the printer

What you are probably wanting is a wireless router. The printer is wireless (Wi-Fi (802.11 b/g/n )). Once the printer is connected to the wireless network, anyone on the network whether wired or wireless will have access. The reason I suggest a wireless router is more possibilities than simply the printer, and the assumption that you don't currently have a network.

If you are already connected to a network and are using the USB 2.0 connectivity, all you would need to do is share the printer within printer properties. This would allow anyone on the network to see and use the device.

Which of the two directions would you like to adventure into? What exactly do you have to work with at the moment, or are you planning on purchasing network gear?
 

http://www.techspot.com/community/topics/help-me-share-the-printer.200244/
Relevancy 59.77%

Hello. I am a complete newbie to server administration. At my current job, I have been tasked with setting up a deployment server. The server is a Windows 2008 server and is not connected to the Internet. The server is a domain controller on its own domain (different from the main domain my job uses). How would I connect this server to the Internet without disrupting other users on the network? By disrupting, I mean connecting to my server instead of the main server for DNS and DHCP. The server has Active Directory Domain Services, DNS, DHCP, and WDS roles set-up.
 

http://www.techspot.com/community/topics/connect-server-to-the-internet-without-disrupting-other-computers-on-network.200167/
Relevancy 68.8%

Recently my network storage device has stopped me from accessing folders with the exception of music. All my pictures for the last 11 years are on it and not backed up anywhere else. Cannot find manual and have done reset but cannot remember URL to setup or admin username and password. Doesn't seem to be online and Edge is giving me no help whatsoever.
 

A:Edge DiskGo 3.5" network harddrive

Ouch if this is a NAS Device or has an IP you can use an app called FIng for your mobile device to find its ip so you can put it in the browser and get to the gui site. If you cant try fing you can use angry ip scanner for winwdows to find its ip.

If you want to try and recover files I would try recuva to obtain any data that has been lost. I am not sure if it is lost or just changed in the mapping.

As most guys will tell you here its very good idea to have three forms of back up. Local, external and online. If you don t know how to use fing or any of the software I duscusses please let me know. I will have links to the downloads below. Goodluck.

http://angryip.org/w/Download
For Fing just type in Fing in either google play or Itunes.
For Recuva: http://www.piriform.com/recuva/download/standard
 

http://www.techspot.com/community/topics/edge-diskgo-3-5-network-harddrive.200015/
Relevancy 30.1%

My Hp pavilliin g7 series laptop running windows 7 home starts up with white screen and no beeps or sounds . Started freezing on Hp logo screen last week only sometimes. Id turn off and it would work on second try. About a year and a half ago I used laptop to preview windows 8. And after I reinstalled windows 7 it has been acting funny. Ie freezing and louder fan noise. I did recently update the bios and a pci device driver that never installed. But now it has white screen this morning. I shut off and powered up and still white.
I took off battery and pressed power for 10 sec plugged back in and still white. Still no noise.
Any ideas?
 

A:HP G7 17" screen starts up white and stays white

Try attaching an external monitor and notice what it displays...
 

http://www.techspot.com/community/topics/hp-g7-17-screen-starts-up-white-and-stays-white.199331/
Relevancy 34.83%

Hi I m having a problem that I gather is fairly common with Windows machines but I haven t been able to find the same case in other threads nor a workable solution among similar cases I have two Windows computers the main laptop on Win and a hybrid tablet on Win I would like drive Win8.1 Trying connect to network to a for both devices to be able to access each other via my home network So for both devices I ve set the network settings to home private I turned on file sharing and discovery and even joined both devices to the same homegroup The end result is that my Win tablet can access my Win laptop both through the homegroup and through direct network access The problem is that my Win laptop cannot do either of those with regard to the tablet in all Trying to connect to a Win8.1 network drive cases I get the network error message that I cannot access the location and should check it for spelling To try to solve this issue I have attempted -Turning off the Windows firewall on my Win tablet -Looking around to see if I could find my Win tablet to unwittingly belong to some sort of domain have not been able to figure that out The odd thing is that I also tried to test out the network by setting up iTunes on both devices and setting them to share their music libraries via home share and sure enough both devices could access each other s libraries Similarly I was able to access my tablet from my Win laptop through a Remote Assistance invitation Would very much appreciate any advice I can get here Thanks in advance nbsp

A:Trying to connect to a Win8.1 network drive

Which Windows 8.1 tablet is this Pro or RT? RT your can't not x86 or x64. Pro you can. Disable Homegroup. Use Workgroup and call it something other than Workgroup like: DANET for example
So do this on laptop and tablet. On laptop make sure the folder is shared out to you the admin or your name example Dan.

So you should have local account on your system called Dan with admin rights. Back on the tablet side you need to create a local account. Did you setup Microsoft account so your login with that account only. You need to create a local account and start using that. It can be done to access the Microsoft account while being on local account while your at home.

If away from home then sign on to Microsoft account to access the cloud features. Or still use the local account and have Microsoft account to access store and skydrive (aka onedrive).
 

http://www.techspot.com/community/topics/trying-to-connect-to-a-win8-1-network-drive.199866/
Relevancy 49.88%

Operating System Windows Home Premium A few months ago I had purchased an INSTEN Composite AV Cable for Sony PlayStation and INSTEN mm Stereo to RCA Cable M F Inch Cm Black With these I connected the sound from my PlayStation through the Audio In jack on my computer This allowed for an audio transfer from PlayStation into computer and out the Speaker Jack in the back This has worked fine until February rd On February nd I had changed my W power supply for a W power supply Problem "In Audio Line" That day everything worked perfectly however the next day I heard a "In Line" Audio Problem humming and the sound was messed up I found out the cause was the power supply I changed out the new power supply for my old one Now my audio "In Line" Audio Problem is messed up I hear what sounds like an echo in the sound If I have the speaker volume set to I can hear the sound fine but only in the left speaker Any higher I hear interference and it sounds like it is being muffled The other problem is I can t play any music or sound without the Stereo Cable being plugged in Also the port is being labled as In Line in my Realtek HD Audio Manager If there is anything that I need to add let me know nbsp

http://www.techspot.com/community/topics/in-line-audio-problem.199925/
Relevancy 49.88%

Yes yet another topic seemingly on one that has been asked many times before But this is definitely different The PC Windows enterprise an mdg vxi with dual NICs one is running to science equipment with a static ip - works fine the other connects to the company network well it s supposed to It s not actually on the domain yet because the network path can never be found because of this DNS issue The Issue I can ping any site by it s IP but never by its hostname I cannot load Yet another ping but title hostname" - different "can't any sites though the browser by using the IP the browsers IE lt -- it s our standard browser right now eww Yet another "can't ping hostname" title - but different and firefox although that s not really supposed to be installed cannot load anything According to windows the card is fully connected with internet access We have tried trying different Yet another "can't ping hostname" title - but different NICs as the Yet another "can't ping hostname" title - but different secondary ones removing the secondary and using only the onboard to connect externally giving it a static IP and entering the DNS servers - we ve tried our dns servers as well as googles public ones all cmd commands that I could think of - nbtstat ipconfig flush and reg DNS fixing the host file deleting the TCP IP stack plugged in a laptop just to make sure the port was okay and everything worked I ve pretty much done anything I can think of and anything I ve read online I m sure other things were tried I just can t remember everything I ve done or my team as done as we ve been working on this for over a week on and off I am cisco certified and took network engineering in school I even called in my networking brain trust back home and we couldn t figure this out I m thinking it s something the science company that came in to set up the machine did and I am hoping it doesn t have to be re imaged as they would have to be called back in to setup the machines again Anyone that solves this will be my hero forever nbsp

A:Yet another "can't ping hostname" title - but different

Any luck with this issue?
 

http://www.techspot.com/community/topics/yet-another-cant-ping-hostname-title-but-different.163897/
Relevancy 34.4%

Hello Everyone !
Right now I am using a broadband connection as my Internet connection and I have a dsl modem which is wi-fi capable. Two of my frnds share the same Internet connection through wi-fi. The problem is whenever any of us watching YouTube videos or downloading something, the whole speed is consumed by that particular computer. I know that many new modems have the capability to limit the bandwidth usage these days but mine is an older one. So I was wondering if there is any way I can limit the bandwidth for each computer.
Thanks !
 

A:How to limit the bandwidth for each computer on a wireless network?

You have to have a modem you can log into an has that type of feature. If you are wired into the network, you should be able to limit the wireless bandwidth and keep your wired bandwidth up. Normally go into the modem, go to setting and wireless setting to limit it.
 

http://www.techspot.com/community/topics/how-to-limit-the-bandwidth-for-each-computer-on-a-wireless-network.193175/
Relevancy 17.2%

Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.
 

A:No power after motherboard install

Ratchetz said:





Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.Click to expand...

By any chance could you post a picture of your computer as it is hooked up right now so we can see if your missing anything. Try to check if the 4pin/8pin connector on the motherboard is hooked up and check for tightness of all the Motherboard connectors to start with.
 

http://www.techspot.com/community/topics/no-power-after-motherboard-install.199528/
Relevancy 34.83%

Hi,

My wife is pestering me to buy her a 10" tablet, which she'll use for surfing, watching videos, etc, and I wondered if anyone can please help me decide a good one for her. I never really delved into tablets before, myself being more of a desktop PC person. I decided to get her something Android based because it iPad seems to have its limitations.

What should I look out for when choosing a tablet? What version of Android, processor, CPU, RAM, storage capacity and screen resolution should I be looking for, do they all take SD cards or a means of data transfer, etc. She also wants the option to attach a keyboard to it. With regard to internal storage, I heard it's partitioned on some models so apps can only be installed in one partition and the other is for photos, documents, videos, media, etc; what minimum partiton size should we be looking at for installing apps nowadays. Can anyone recommend any models we should be considering?

Thanks.
 

A:What 10" tablet for my missus?

To make this simple. What Operating System you have on your PC or your wife PC. Should stick to what you have so you already know how to use it on the tablet.

Windows Users get Windows tablet
Surface RT, Pro, 2nd Gen (remember these cost more)
DELL has one for $299 8-inch. You wanted a 10-inch.

Now some Windows users have Android tablets because at the time there was much of choice even though Windows XP Tablet and Windows 7 Tablet options where available. Android tablets were used more.

If your both are on MAC apple get the iPAD 9.7-inch 4:3 ratio tablet. They do have 7-inch again 4:3 ratio tablet.

I have one Windows 7 Ultimate 64-bit dual core 9.7-inch 4:3 ratio tablet. I use the touch pen with mine it's the same one for the iPad. Surface tablets uses digitize pen with 2 AAA batters inside.
 

http://www.techspot.com/community/topics/what-10-tablet-for-my-missus.199527/
Relevancy 35.69%

Hi there Tech Forum thanks in advance for your help - I have a question about a LAN and stuff There is a modem and a wireless router with LAN ports In one of them there is conected also a switch Network LAN Question with LAN ports - Some weird things have been going on I always get a wireless connection so LAN Network Question no problem there Issues appear with the wired network On one hand I had many times an unidentified network a x x x ip and no LAN Network Question network Nothing changed in configuration on my box or the router and got to connect at MB s while if connected through wi fi I got LAN Network Question more than MB s From a moment on again unidentified network and no signal in the adapter a yellow light would blink quick So now after touching the cable and a little bit of despair not driven to the computer by the way I have a full conection by lan and by wi fi both at a good speed AND weird for me a green light on and the same yellow blinking - So main questions are - What does the green light ON not blinking means - Could there be a difference due to the cable manipulation - Is there a gost inside my router D Thanks a bunch to all of you I try my best to understand computers so now I am happy with the connection but curious on the rest - Regards nbsp

A:LAN Network Question

How new are these devices? Are you using new 'patch' cables? Is DHCP running on only one of the devices? Seems weird that "touching the cable" caused a change.

1. The LEDs differ, but usually one signifies a connection [on/off] and the second signifies activity [blinking]
 

http://www.techspot.com/community/topics/lan-network-question.199370/
Relevancy 50.74%

Hey guys, I was wondering if anyone might have an idea how to fix this.

I regularly plug in my laptop to my television to game or work and have had no issues other than some colors being slightly different. I played with the color settings and got it close, but the tweaker in me remembered reading that some people were getting more true color using the ycbcr444 color display settings. However, I didn't realize that my television does not support this format and now am unable to revert it back.

Is anyone aware of a way to do a full reset of the Nvidia control panel settings? I can't switch the color display modes for the external monitor if I do not have one plugged in, so this becomes a catch-22
 

http://www.techspot.com/community/topics/format-not-supported-plight-of-rgb-and-ycbcr444.199275/
Relevancy 34.4%

I'm looking to upgrade from my 24" 1920x1200. I tried to play games on my 55" TV and it just didn't feel right. I play mostly FPS like BF4
 

A:Does anyone here game on a 30" 2560x1600 monitor

I game on a 100Hz+ 27in 2560x1440 Qnix QX2710. The extra pixels and the higher framerates are excellent for FPS gaming, and for the price you can't get much better. A quick google will show up lots of useful threads if you're interested.

I wouldn't get a 30in 2560x1600 monitor just for gaming, they are very expensive and more aimed towards graphics/design professionals rather than gamers. Things you're paying a premium for such as a wide gamut won't be useful and indeed might be detrimental as a gaming and general use monitor.
 

http://www.techspot.com/community/topics/does-anyone-here-game-on-a-30-2560x1600-monitor.198467/
Relevancy 50.74%

Hey,
I woke up on May 10th 2013 & when it started up my laptop I saw this.




I was a bit scared, but I decided to run the following programs:
Mbam (AV)
DSKCHK
Disk cleanup
Disk defragmenter
Scan disk (SCR-scanow)
AVG tuneup
AVG (AV)
MSE (AV)
Restore point.
I do not know what happened, but I have posted on several other forums, but no answer.
Thanks,
Danawesome.
 

A:Repeated "bad image" error (think it's something to do w/laptop)

Did you fix this?
 

http://www.techspot.com/community/topics/repeated-bad-image-error-think-its-something-to-do-w-laptop.198178/
Relevancy 34.4%

A colleague at work would like to set up either a SHN or a SBN. What is the best way to go about this? Would it be best to be safe to be cloud based? What equipment is needed etc...?

This will take some discussing, so please ask any questions you need. The intention would be for two/three people to access the information on the network initially. A printer will be shared on the network, allowing scan to email. Laptops would be used to access the network from external sites, this is why I'm thinking of going the cloud based route, so they can log on and access the server from anywhere in the world...

Any help/guidance is appreciated.
Thank You!
 

A:Setting up a small home/business network

Yes, you can consider the Cloud as a solution for access, BUT . . .
it also brings with it issues like:

security
privacy
backup
ownership
You should start reading about these issues before committing to this solution.

One alternative would be a NAS device connected to your router. Putting your modem, router and NAS on a UPS power system would allow (with proper configuration) external access and you have total control, of all of the issues above.
 

http://www.techspot.com/community/topics/setting-up-a-small-home-business-network.198198/
Relevancy 35.69%

I woke up this morning and my laptop is having trouble connecting to the internet However internet worked on other laptops and devices so it must be the laptpo s problems I Network Unidentified looked up the problem and I eventually get to a point where I figure out I need a new ip After typing ipconfig renew it says Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its media disconnected An error occurred while renewing interface Wireless Network Connection Unidentified Network The sup port for the specified socket type does not exist in this address family No operation can be performed on Bluetooth Network Connection while it has its m edia disconnected No operation can be performed on Local Area Connection while it has its media di sconnected I don t know what to do now Please help Windows IP Configuration Host Name Username Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address E - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR b g n WiFi Adapter Physical Address C - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d ca Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Unidentified Network Gateway DHCPv IAID DHCPv Client DUID - - - - - F-BD-FD- - A-B - F- -BC DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - - -A -DA DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address - A-B - F- -BC DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap BEE - C- F F- -D B D BD Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter TO Adapter Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled YesAnd here s the ipconfig all just in case nbsp

A:Unidentified Network

Wireless? Your laptop isn't getting an IP address is the cause of your issues. Find out of the router has enough allocation.
 

http://www.techspot.com/community/topics/unidentified-network.198148/
Relevancy 20.64%

Hi

I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V

Holding down the power button en stop/reset won't work

How can I test the logic board is defect?

Image logig board






Cheers
Harrie
 

http://www.techspot.com/community/topics/canon-printer-pixma-mp610-no-power-no-display.197978/