Windows Support Forum

WLAN Connection, but NO WLAN Internet

Q: WLAN Connection, but NO WLAN Internet

I m having a near identical problem Perfect connectivity to Network amp Internet via LAN Ethernet Perfect connectivity to Network Including ALL Hardware Router Switch Printer NAS other NO WLAN but Connection, WLAN Internet computers via WLAN both the onboard mini-PCIe card as well as an external USB WiFi Adapter ABSOLUTELY NO INTERNET via WLAN same results for both onboard and external adapters Here s my computer model and some specs Compaq CQ - US Win Ultimate x GB RAM Atheros AR Latest Driver Installed v FireFox IE x amp x Versions I do NOT have ANY Toolbars in my browsers I do have some Add-ins in FireFox which quot could quot affect internet connectivity but WLAN Connection, but NO WLAN Internet I believe they are configured properly and as I ve already stated I have PERFECT Internet connectivity via LAN just NONE via WLAN Besides all of the quot Obvious quot things to try I ve also uninstalled this card amp driver multiple times Allowed Windows to re-install AND forced manual re-installation and installed the driver application from Atheros I ve also performed multiple quot IPConfig release renew quot attempts which have not produced a solution Windows Network Diagnostic gives this result quot Your broadband modem is experiencing connectivity issues quot NOT TRUE but went thru their troubleshooting steps anyway to no avail I m completely stumped as to what s causing this problem and how to remedy it I m fairly convinced that it s a setting problem in Win not the browser or Hardware I ve tried WiFi connectivity to other available Networks and can connect Says quot Connected quot and quot Internet Access quot but am NOT able to browse the internet I ve attached a file with all IPCONFIG Ping Some Router Settings and a short list of pertinent programs Any REAL Help would be greatly appreciated REAL help is NOT quot Unplug your modem and then plug it back in quot or anything like that If you re a tech person please review the attached file before advising Thank you very much in advance JSLM nbsp

Relevancy 100%
Preferred Solution: WLAN Connection, but NO WLAN Internet

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 101.91%

Hi,
My internet is through WLan while I have to connect to the intranet using the lan. I want all my Internet traffic in wlan. But it's not working. Whenever I enable both wlan and LAN, all the Internet requests go to LAN and so can't use Internet.

How to configure my system (with XP SP3) so that all the internet traffic/requests use WLan as first choice instead of LAN ?
 

Relevancy 101.91%

I have an open thread in the Networking section Here s the link http forums techguy org networking -wan-connection-but-no-wan- html post I m posting here for Issues problems and or solutions DIRECTLY related to MALWARE For solutions related to Networking please post to the link above NO Internet WLAN WLAN over but Connected Basic details of WLAN Connected but NO Internet over WLAN what s going on I can connect to and access EVERYTHING WAP Router Switch Printer NAS Other computers etc while connected over WLAN I cannot connect to the INTERNET WLAN Connected but NO Internet over WLAN over WLAN Although it DOES say quot Internet Access quot I CAN connect to everything including Internet when connected over LAN Other computers CAN connect to the Internet using this WAP but this is NOT A LOCAL NETWORKING ISSUE PLEASE don t post Networking questions or solutions on this thread Please refer to the link above for ALL Networking questions unless they are DIRECTLY related to MALWARE Pertinent Software Installed on this system Win Ultimate x AVG Free NO Virus found Ad-Aware Free v No issues found Windows Firewall Disabled for Troubleshooting Windows Defender Disabled for Troubleshooting NO OTHER FIREWALL S W Installed NO VPN S W Installed Netgear s VPN SW is not compatible with Win x and was removed NO BLOATWARE Installed All preloaded Bloatware was removed on day FireFox IE x amp x v Any programs Bloatware VPN etc which were removed were removed using Revo Uninstaller and their Registry Tracks were deleted NO NEW S W was added or removed just prior to this problem arising ScanNow Results C gt sfc scannow Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection did not find any integrity violations Click to expand HJT Results Logfile of Trend Micro HijackThis v Scan saved at PM on Platform Windows WinNT MSIE Internet Explorer v Boot mode Normal Running processes C Program Files x AVG AVG avgtray exe C Program Files x AVG AVG Identity Protection agent bin avgidsmonitor exe C Program Files x Lavasoft Ad-Aware AAWTray exe C Program Files x Internet Explorer iexplore exe C Program Files x Internet Explorer iexplore exe C Windows SysWOW Macromed Flash FlashUtil l ActiveX exe C Program Files x Internet Explorer iexplore exe C Program Files x Mozilla Firefox firefox exe C Program Files x Internet Explorer iexplore exe C Program Files x HJT Trend Micro HiJackThis HiJackThis exe R - HKCU Software Microsoft Internet Explorer Main Default Page URL http g msn com CQNOT R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Page URL http g msn com CQNOT R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http g msn com CQNOT R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKLM Software Microsoft Internet Explorer Main Local Page C Windows SysWOW blank htm R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName F - REG system ini UserInit userinit exe O - BHO HP Print Enhancer - C E- - -BF - C - C Program Files x HP Digital Imaging Smart Web Printing hpswp printenhancer dll O - BHO AcroIEHelperStub - DF C-E AD- -A -FA C EBDC - C Program Files x Common Files Adobe Acrobat ActiveX AcroIEHelperShim dll O - BHO WormRadar com IESiteBlocker NavFilter - CA F - F E- B -A E- E E C C - C Program Files x AVG AVG avgssie dll O - BHO Groove GFS Browser Helper - - C - D -B F - BBC D A E - C PROGRA MICROS Office GROOVEEX DLL O - BHO Windows Live ID Sign-in Helper - D - C - ABF- ECC- C - C Program Files x Common Files Microsoft Shared Windows Live WindowsLive... Read more

Relevancy 99.33%

I am using Asus WL520GU with Teddy Bear Tomato Firmware. My main rig using Win 7 Ultimate 64bit is wired to this router. Two other PC using XP are wirelessly connected to this router without problem. I have disabled security on my router, but set up Mac restriction to ensure only authorized wireless devices can have access.

The problem is that I have another Win 7 ultimate 64 bit on my HTPC connected to this router through Airlink 101 USB Wireless adapter. The HTPC can see all my other PC's (1 Win 7 and two XP) and the homegroup without problem, but no internet connection whatsoever. I can share libraries with the other PC's. I searched around and it seems that IPV6 could be the issue.

I freshly reinstalled the system last night, still no luck. Only WLAN and homegroup, no internet. I am wondering anybody has any idea what could be the cause? Win 7, or my router setting.

A:Win 7 WLAN, but no internet connection

IPv6 is not really ready for internet use. It is necessary for homegroup, but you will want to have IPv4 enabled.

Look in your router settings and switch to IPv4, and also on your computer.

http://www.sevenforums.com/network-sharing/76531-win-7-wlan-but-no-internet-connection.html
Relevancy 98.47%

This looks a case like similar postings under the same title but is not After reinstalling XP on my desk top relevant or not my laptop still automatically acceses the wireless modem router but indeed without internet access My solution so far I first connect to an connection modem but Internet No Wlan other unprotected network then disconnect and surprise after reconnecting with my own network the internet reappears IPconfig dutch let me know where you need translation Windows IP-configuratie Hostnaam ChallengeWorks Primair DNS-achtervoegsel Knooppunttype hybride IP-routering ingeschakeld nee WINS-proxy ingeschakeld nee Ethernet-adapter Bluetooth-netwerkverbinding Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving Bluetooth-apparaat Personal Area Network Fysiek adres - - B-FC-F -F DHCP ingeschakeld ja Autom configuratie ingeschakeld ja Adapter voor draadloos LAN Draadloze netwerkverbinding Verbindingsspec DNS-achtervoegsel Beschrijving Intel R WiFi Link AGN Fysiek adres - -FB- - E- DHCP ingeschakeld ja Autom configuratie ingeschakeld ja Link-local IPv -adres fe c f b cb voorkeur Automatisch geconf IPv -adres voorkeur Subnetmasker Standaardgateway DHCPv IAID DHCPv -client DUID - - - - -CB- - - - - -EA- - D DNS-servers fec ffff fec ffff fec ffff NetBIOS via TCPIP ingeschakeld Ethernet-adapter LAN-verbinding Mediumstatus Wlan modem connection but No Internet medium ontkoppeld Verbindingsspec Wlan modem connection but No Internet DNS-achtervoegsel Beschrijving Broadcom NetLink TM Gigabit Ethernet Fysiek adres - - -EA- - D DHCP ingeschakeld ja Autom configuratie ingeschakeld ja Tunnel-adapter LAN-verbinding Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving isatap B -AE - - A A-F DC B B br B Fysiek adres - - - - - - -E DHCP ingeschakeld nee Autom configuratie ingeschakeld ja Tunnel-adapter LAN-verbinding Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving Teredo Tunneling Pseudo-Interface Fysiek adres - - - - E- DHCP ingeschakeld nee Autom configuratie ingeschakeld ja Tunnel-adapter LAN-verbinding Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving isatap C B C -FB A- C B-A DC-F D E br CE Fysiek adres - - - - - - -E DHCP ingeschakeld nee Autom configuratie ingeschakeld ja Tunnel-adapter LAN-verbinding Mediumstatus medium ontkoppeld Verbindingsspec DNS-achtervoegsel Beschrijving isatap E A F -A CB- BF -A C-FF B D br AF Fysiek adres - - - - - - -E DHCP ingeschakeld nee Autom configuratie ingeschakeld ja I have the same problem when the desktop is not on A great many thanks for any help nbsp

Relevancy 98.47%

In the last month or so I've begun having intermittent loss of connection within my home WLAN Wireless is HP Laptop w HP and wired is Dell desktop w HP Even with both machines awake they can't quot see quot each other This network has been up for years and has been fine on since my upgrade in Oct I've discovered now that if I go to the Dell and check the network settings it says its a 'home' network but when i click through to the change screen the 'public' box seems highlighted If I then click on quot home quot essentially reassigning the network type everything reconnects and the network visibility is restored Also perhaps a separate issue I've been losing internet connection frequently This happened rarely in the past when a simple modem restart sufficed But now the only thing that works is disconnecting the actual coax from the modem as well as power cycling Could this be related to Windows in connection internet WLAN Losing and/or any way The modem is a common Motorola surfboard only about - years old Any thoughts

A:Losing internet connection and/or WLAN

An easy first step is to try changing channels on your wireless. If everything has been fine up until now and you haven't made any changes, it could be just plain old interference.

If you can take a look and see what channels are being used around you that would help. Most people let the wireless router use the defaults. If you've done that as well there's probably a boatload of people around you on the same channel and that can and will cause the kind of problem you have.

If that doesn't work we can dig a bit deeper.

http://www.sevenforums.com/network-sharing/62451-losing-internet-connection-wlan.html
Relevancy 97.18%

Okay, I'm not sure how precise that topic is, so I try to clarify.

I have:
-Desktop pc with Windows XP Pro SP3 with internet connection.
-Vanilla Eee PC 901 (Linux)

I live in a student housing foundation's apartment, and there is a local area network based Internet connection in every apartment. The downside is that we have a restriction of only one MAC-adress allowed per tenant. But anyway for that reason I don't have a router or modem for it's not needed.

What I'd like to do is to have my desktop computer share its internet connection to my laptop with WLAN. Or something like that.

Also, I have no real experience with Unix-like operating systems.
 

Relevancy 96.32%

Hello no internet longer to any HELP!!! can (WLAN/LAN) connection Laptop connect I recently bought a new hercules wireless router I then installed this router exactly as the instructions said and installed the software onto HELP!!! Laptop can no longer connect to any internet connection (WLAN/LAN) my laptop following all the correct instructions however the laptop could not connect to the HELP!!! Laptop can no longer connect to any internet connection (WLAN/LAN) router when complete i therefore reset the router and tried again same problem i then checked on my second laptop and found that this laptop could succesfully connect i then went back reset the router again and installed the software on this second laptop again i can connect to the router via this laptop but still not with the first laptop i also tried using my eternet cable to connect the first laptop to the router with no luck I then tried to IPCONFIG the router using the ethernet cable and CMD did not give any IP adresses what-so-ever i have tried everything i can come up with to connect this laptop to my router but nothing works whilst all the other computers -wireless and -ethernet work perfectly thank you in advance for all your support ardjan nbsp

A:HELP!!! Laptop can no longer connect to any internet connection (WLAN/LAN)

Welcome to TSG:
Will need some info before we start making suggestions:
Make and model of modem and router ?
Operating systems involved ?
Let's see this from a working laptop and a non working laptop:
Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

https://forums.techguy.org/threads/help-laptop-can-no-longer-connect-to-any-internet-connection-wlan-lan.986698/
Relevancy 96.32%

Hi I have one HP G laptop When I turn the laptop one it boots up normal but slow Either LAN or WLAN icon shows Network connected However no applications IE Google Chrome Malwarebytes Updates etc on the laptop can connect to the Internet These applications indicate no network connection I opened the network center and looked at the connection diagram there is no quot X quot on the connection The network metering shows there is the exchanging data packages between the computer and the network Below are things that I had applied Ran Malwarebytes -- gt No infection detected Ran Kaspersky took for ever -- gt No infection detected Ran IP commands a netsh winsock reset b netsh int ip reset resetlog txt c ipconfig flushdns d ipconfig registerdns e ipconfig release f ipconfig renew I did all the things above with Administrator account but still nothing can access can access no Internet connection, applications shows to LAN and but WLAN the Internet Now I stuck Anyone can help me to resolve this problem Thanks CT Laptop Spec HP G AMD A GB RAM Windows Home Premium x nbsp

A:LAN and WLAN shows connection, but no applications can access to Internet

https://forums.techguy.org/threads/lan-and-wlan-shows-connection-but-no-applications-can-access-to-internet.1119951/
Relevancy 95.89%

Hey Ok so here is the problem a month and a half ago the laptop wouldn t WLAN device manager is is says disabled, says enabled! WLAN Laptop turn on it goes and gets fixed and the power supply wasn Laptop says WLAN is disabled, device manager says WLAN is enabled! t returned today we finally receive the power supply which caused month of the waiting So I plug it up and everything goes on fine and dandy however the laptop will not receive an Internet connection and it says that the wireless LAN is disabled the laptop is a Presario v Compaq which has a button on the front of the laptop which enables and disabled the wireless LAN the button is currently set to enabled however the button is jammed on enable and it has an Amber light so I can t turn it on and off I went to device manger then network adapters and acording to that the WLAN is enabled but the laptop is telling me it s disabled is there any way I can fix this or will it have to get sent away again I hope the question makes sense Laptop says WLAN is disabled, device manager says WLAN is enabled! I m only so I m not the best when it comes to computers I also badly need the laptop fixed because I need it for school and I am currently posting this question using my iPhone nbsp

A:Laptop says WLAN is disabled, device manager says WLAN is enabled!

Well, if the button isn't toggling the wireless state, you may have to send it away again. What do you mean the button is "jammed"?
 

https://forums.techguy.org/threads/laptop-says-wlan-is-disabled-device-manager-says-wlan-is-enabled.932858/
Relevancy 95.89%

I am setting up a new wireless router and new laptop.

The laptop sees the WLAN (name) in Control Panel -> Networking -> Sharing and Network, but this WLAN (name) does not show up in the laptop's 'WLAN selector list' when I click on the network icon that's in the system tray.

I hope my description, above, makes sense. If so, does this problem description suggest an area of configuration that I have done incorrectly?

Thanks for any hints.

A:WLAN in Control Panel but not in system tray WLAN list

The new router needs to be setup with the SSID not hidden. Also the router needs to be set for the same type of wireless that the devices use.

It is also helpful when you post these kind of questions, to include system info in your profile and also manufacture and model of the router.

http://www.eightforums.com/network-sharing/70949-wlan-control-panel-but-not-system-tray-wlan-list.html
Relevancy 95.03%

I recently set up a Linksys WRT54GS wireless router and it's been working perfectly up until this morning when my brother accidentally opened the Linksys EasyLink Advisor from the system tray and immediately exited. After that, the WLAN light went out on the router and there's no active internet connection detected coming from the router (currently plugged straight into the modem). 192.168.1.1 (to access the router settings) no longer loads as well.

To note, I'm running Vista on the laptop that's now connected to the internet (not sure if that will make a difference in troubleshooting the problem though).
 

A:WLAN light and internet connection lost on Linksys WRT54GS

Turn off the modem and the router.
Turn on the modem, wait for a steady data light.
Turn on the router, wait two minutes.
Reboot the connected computer.
After the computer boots, please post the following.

Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

https://forums.techguy.org/threads/wlan-light-and-internet-connection-lost-on-linksys-wrt54gs.730492/
Relevancy 94.17%

On my old netbook with Windows XP bit the WLAN works perfect But I encounter connection issues on my new notebook with Windows bit I'm connected to a router Symptoms playing games works pretty fine despite some heavy lags now and then messenger MSN ICQ IRC work fine and stay connected FTP fileupload with FileZilla works only in active mode not passive connection works, Internet (WinXP timeouts Win7 issues, WLAN not) mode uploading files in passive mode result in endless timeouts since active mode opens ports on my computer is it a port-based issue wireless internet on other machine with Windows XP works I experience the problem the most when browsing the internet in a webbrowser if a connection issue happens then no websites will load anymore most of all I got problems connecting to DeviantART WLAN Internet connection issues, timeouts (WinXP works, Win7 not) graphic websites with lots of images the website will load but rarely the thumbnails of the images the progressbar just loads and loads EventViewer on Windows often gives messages about timeouts during DNS lookup when the internet connection in the webbrowser drops I can still ping google in command line using the websitename takes ms using the IP takes ms I can also still chat in my messengers Trials nothing solved the problem disabled IPv running commands netsh interface tcp set global rss disabled netsh interface tcp set global autotuninglevel disabled netsh int ip set global taskoffload disabled set router encryption from WPA to WPA tried an older driver for my WLAN adapter tried different firewalls also disabled firewall and antivirus completly installed all possible windows updates also silverlight disabled the wireless adapter of the notebook and plugged in an external WLAN adapter dongle I looked around for solutions of this problem and found alot of people talking about similar issues change from WinXP to Win suddenly having connection issues on Win while WinXP works fine but I did not found THE solution yet and I would wonder if there is any cause then it would have been already included in a windows update I guess It really seems to be a Windows problem I really hope somebody can help me This heavy problem can drive someone back to Windows XP and waiting for the next major release Despite this problem Windows works perfectly I love it and would not like it to go back to Windows XP just to be able to browse the internet properly Thanks for any answers and links

A:WLAN Internet connection issues, timeouts (WinXP works, Win7 not)

Hello real, welcome to Sevenforums

Wireless works fine on my computer and most others. So I would guess the problem would lie just with your particular set up. What I mean by that is, it could be anything from your particular hardware (incompatible, for example) to programs installed on your computer causing interferance (viruses could do this as well). And pretty soon here, you're going to be needing that IPv6...

What antivirus do you use, and have you updated it/scanned your computer? Look up this and see if there is anything you have not yet done: Internet Troubleshooting Guide

Is your adapter compatible with Win 7? Have you tried another wireless adapter on the Win 7 computer to see if it works or not?

http://www.sevenforums.com/network-sharing/210622-wlan-internet-connection-issues-timeouts-winxp-works-win7-not.html
Relevancy 93.31%

Is there a internal or external cmd program that has the same functioninality like vista netsh wlan command.
netsh wlan is not included in xp and the netsh from vista doesnt work in xp
 

Relevancy 92.02%

Hello,

I have a DLink DIR 615 hard-wired to my NAS drive and I connect to my home network through WLAN. The questions I have is - why is the download from my network drive slower than download speed from the web.

For tests, I initiated a download of 1G+ file from Oracle website and it took me < 15 mins. But when I tried to download the file from my NAS drive, it took me almost 1Hr.

Wondering why such a difference and if it can be fixed/tweaked.

Thanks in advance,
AbbY
 

A:WLAN intranet dnld vs WLAN internet dnld

Perhaps your NAS is simply slower at moving data out. Maybe you could try connecting with a wire to your DIR 615, effectively making it a switch, and seeing if that affects the transfer speed from your NAS. Or, even better, try a different Ethernet switch, with just your NAS and one computer hooked together. If you still get slow tranfer speeds, then probably either your NAS doesn't support any higher speeds or there is a setting in it that needs changed. If you do this and the transfers go more quickly, then it is probably some setting in your DIR 615 that is causing problems. Or maybe other users were using up bandwidth at the same time.
 

https://forums.techguy.org/threads/wlan-intranet-dnld-vs-wlan-internet-dnld.1048403/
Relevancy 85.57%

I have a Sony Vaio model number vgn fe77Og. I'm running XT operating system and have had very few problems. But now my slam connection doesn't seem to be working or works very hit and miss. It usually connects to my home wireless and my Mobile modem but in the last week nothing. Is there something I can do to get my wireless working again?
 

A:wlan connection

can we see the following
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
Direct link to the program is here http://wpc.475a.edgecastcdn.net/00475A/XirrusWiFiInspectorSetup.1.2.0.exe

{If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

A user guide is available here http://www.xirrus.com/Products/Wi-Fi-Inspector/xirruswifiinspectorguide1-2-0.aspx

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
Full details are here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot

Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better.

If you are using the Mac OS then use http://www.istumbler.net/
------------------------------------------------------------------------

------------------------------------------------------------------------
Device Manager
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X
post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
Full ... Read more

https://forums.techguy.org/threads/wlan-connection.1021954/
Relevancy 85.57%

I have recently lost internet connection after Upgraded my vista to serivce Pack 2. Except that my laptop gives me msg: exception Message-Acer system is not recognize. I have feeling that those two problem are connected.
the msg in relation with net connection: Windows could not start the wlan autoconfig sevice on local computer. Error: 0x80040154. So I type in command prompt ipoconfig/all and after pressing enter it says:
Wireless Lan adapeter wirless Network connection:
Media state: media disconnected
Connection specific NDS Suffix: Belkin
Physical Address 00-1E-4C-51-3C-88
DHCP Enabled yes
autoconfiguration anabled yes
Tunnel adapter Local Ara Connection
Media state: media disconnected
connection specific dns suffix
description isatatp. Belkin
Physical address: 00 00 00 00 00 00 e0
DNCP enabled No
autoconfiguration enabled Yes
Tunnel adapter local area connection
Media State Media disconnected
Description Reredo Tunnelig Pseudo- Interface
DHCP enabled
Autoconfiguration Enabled Yes

anyone know how to fix my net connection??? Please help

http://www.vistax64.com/windows-updates/267901-wlan-connection.html
Relevancy 84.28%

I have three computers in the same network.
One with wired ethernet, (notebook) with 802.11g, desktop with 802.11g. I have a WRT54G linksys router.
The laptop seems to "forget" its settings, and i have to reset, renew, and enable etc..... each time it starts up. It is running windows ME. Recently, both PCs on the WLAN reported "Not able to associate with access point". I did a hard reset on the cable modem and router. The laptop reported "connected to access point, but internet access could not be found", but the internet did work. On the other PC, i noticed that the laptop would only work if the PC had an automatically configured IP address. Now, finally after a lot of guesswork, and a lot of time, both PCs work. But I am sure after I restart the laptop, it will lose connection again...
Any help is appreciated. Thanks
 

Relevancy 84.28%

I want to create the WLAN enviroment to play multiplayer games. Two of my laptops, One has XP(SP2) and another one has Vista Home premium. Please give the step by step procedures so that i can create the WLAN enviroment between the two laptops of my own successfully.
 

A:WLAN connection between XP and Vista

Define an ad-hoc wireless network on one PC.

Define the same ad-hoc wireless network on the other PC.

Decide whether you want the PCs to be assigned AutoConfig IP addresses or whether to assign static IPs. If the latter, do it.

Configure firewalls to allow the desired access.
 

https://forums.techguy.org/threads/wlan-connection-between-xp-and-vista.728126/
Relevancy 84.28%

I have successfully set-up a wireless network between a fixed PC (XP) and laptop (Win 200) using WPA-PSK encryption.
I am trying to set-up a second laptop (running XP) but am only successful if I turn encryption off.
Enabling encryption causes the laptop to enter a never ending loop of identifying the network but never being able to obtain a network address.
I have stopped the Win XP service from automatically configuring my wireless network as well as trying to use Fixed IP addresses.
I am using a D-Link DSL-G604T router and DWL-G122 USB Adapter. Signal strength is excellent.
Anyone have any other ideas as I really would like to secure my network.
 

https://forums.techguy.org/threads/wlan-dropping-connection.385746/
Relevancy 84.28%

hey guys, like the title says, i keep losing my connection every 4-6 hrs. here's a list of devices:

*Desktop p4
*DSL Modem
*linksys wireless router WRT54GX. B/G
*laptop dell latitude with built-in Wi-fi.

Setup: i have DSL connected directly to router, Router To PC, and Laptop to wireless lan. Router is configured to use DHCP, it is broadcasting the ssid, i have my wep setup. the router is sitting almost on top of the Desktop monitor. I ask, is it better if i setup an Static IP or DHCP is better? Its really annoying losing your connection specially when you're in the middle of something. HELP!!!
 

Relevancy 84.28%

Hi all As the and issues connection LAN WLAN title says I m having issues connecting to the LAN and to the WLAN We have a Motorola SB Surfboard Cable Modem and a Linksys router not sure what model The family just recently got LAN and WLAN connection issues an Xbox and of course we set it up for Live right away Anyway while my brother was playing CoD I was on the wireless on my laptop Dell Inspiron from the router We get randomly disconnected and can t connect for a few minutes We didn t think anything of it we re used to battling for bandwidth But after that my laptop couldn t pick up the router s wireless signal But the was still able to connect hardwired to the router After a while I try connecting my lapop directly to the modem but I always got quot Unidentified network quot or quot Limited connectivity quot It s also the same when we try to hardwire the main family desktop to the modem However my LAN and WLAN connection issues brother s laptop and the can still connect just fine through the modem Called ISP and all they could say was that the connection was fine but it stopped at the router which I already knew I ve tried all the basic troubleshooting but since I m not too familiar with networking I haven t tried any IP computer settings My dad wants to swap the modem out for a new one tomorrow but I honestly don t believe it has to do with that This problem doesn t make much sense to me so if anyone has any ideas let me know Please and thank you By the way my brother s laptop and the family desktop is XP and my laptop is Vista We ve had no problems previous to getting the nbsp

Relevancy 84.28%

I have this problem with a wireless connection. I have two HP Pavillion Nvidia nForce networking contollers. There is also a D-Link Router with 802.11g/2.4ghz. Under the Available Wireless Connections there are different connections. They have different wierd names with like a combinations of numbers and letters. There is also a NETGEAR connection. I'm just trying to figure out which one is mine, and which one are the neighbors, and I'm trying to find the password for it, or maybe make a new connection that is connected to that router.
 

A:wlan connection problem

Configure your router's SSID to be a unique string that you'll recognize, then you'll know.
 

https://forums.techguy.org/threads/wlan-connection-problem.596201/
Relevancy 84.28%

i have a wireless USB adapter which i bought on ebay a while ago i had it working but then upgraded my PC and well now it isnt ive tried to look for it on the internet but nobody seems to have heard of it on the box it says AIRVAST WN- Mini-USB Adapter i have looked for new drivers etc but found none i have installed the drivers from the problems WLAN connection CD and i got a box that sayid something about the windows HCL i clicked continue anyway anyway the problem is it is recognized in the device manager which says it it quot working fine quot when the bubble pops up asking which network to connect to i have WLAN connection problems to tick a box that says connect to this network even though it is not secure but when i tick the box the connect button gets faded out and i cant click on it help there is probably a very simple explanation for this WLAN connection problems but i am a bit of a novice at this sort of thing nbsp

A:WLAN connection problems

Its ok i have sorted the problem, i found a backup file with some better drivers for it that i didnt realise existed, let alone i had.
 

http://www.techspot.com/community/topics/wlan-connection-problems.13404/
Relevancy 83.85%

Hi I have connection can but 13 see WLAN XPS 5.0GHz 2.3GHz connection cannot Dell see a TP-Link WDR Wireless Dual Gigabite Router also known as the N nbsp I recently changed the settings on the router so that it was broadcasting networks Dell XPS 13 cannot see 2.3GHz WLAN connection but can see 5.0GHz connection one at GHz and one at GHz They have different SSIDs so that I can tell them apart Everything seemed to be Dell XPS 13 cannot see 2.3GHz WLAN connection but can see 5.0GHz connection fine and Dell XPS 13 cannot see 2.3GHz WLAN connection but can see 5.0GHz connection I could detect both networks on my laptop this was perhaps - days ago Today I was doing work in a part of the house which is furthest from the router Since I was connected to the GHz network I thought it s probably because the GHz band doesn t have as wide of a range so I tried to switch to the GHz network only it doesn t show up on the list of available networks The strange thing is my phone and ipad can see both networks just fine and my laptop could too originally Now it s just my laptop that can t seem to see it I tried googling about it but everyone else seems to have the opposite problem than mine ie their laptop can see the GHz network but not the one I ve tried moving my laptop closer to the router but it still doesn t see the GHz network disconnecting and then quot forgetting quot the GHz network rebooting the router and my laptop disabling and enabling the driver for the network adapter all no dice Since I ll probably have to do more work in the room that s farthest from the router I really need to be able to connect to the GHz network I want my laptop to be connected to both of them so I can use the GHz one when I m closer to the router Can anyone help me Potentially Relevant info - Windows - Network Adapter is listed in Device Manager as quot Broadcom ac quot

http://en.community.dell.com/support-forums/laptop/f/3518/t/19994346
Relevancy 83.42%

Hi, I have a phone Nokia E65 and I want to connect it through WLAN to my PC.
Can anyone post a complete guide of how to do it because i really want to make it work.
If someone who has the same phone or knows about that stuff please help me.
And please, as for my previous posts, dont misjudge me. I am 17 and i am learning these stuff.

http://www.vistax64.com/network-sharing/161548-nokia-e65-problem-connection-through-wlan.html
Relevancy 83.42%

Hi All I have been using XP SP in my desktop for last months and since then I was connecting to WLAN my friend set the WLAN then- he s gone for a world tour using NETGEAR USB WLAN Adepter At the begining WLAN was okay Things started to go crazy since our house changed to a new internet provider weeks back When the new connection was given- one guy came in to install the modem it was offered free of cost and my landlord took Re-installing connection SP3 WLAN problem after XP the opportunity While he was installing- he wanted to view some of the machines to see whether the internet was working At first he could not connect to internet using my machine- it showed that it is connecting- but nothing happened- it could not connect to WLAN Then he changed some configurations s in my PC I went to next to the main modem that time When I returned just in seconds I found him working with my PC- and he said that - he changed quot encryption quot and now it s working fine It was working pretty well since then But last night I had to re-install a fresh copy of XP SP After re-installing I can not connect to the WLAN using my USB card I can connect through LAN wire though While using WLAN adpter I WLAN connection problem after Re-installing XP SP3 can find my network- but I just can t connect to it It tries to connect for some time and then it stops Any help would be greatly appreciated Hashmi P S before posting I read some of similer the problems in the forum- but as none of them addressed my problem directly- I am putting this question In case of repeating question- my apologies nbsp

Relevancy 83.42%

I just bought a new HP computer (Pavillion dv6000) equiped with a slightly different WLAN
card than my dell. (Dell installed WLAN 1350 WLAN Mi)As before, I am having initial problems connecting. I know it can be fixed because I saw a man I used to work with fix my dell by going to the ms dos prompt and typing in something. Immediately it started receiving wireless signal. I'm just not sure what he did! I'm such an idiot when it comes to wireless.... And I was hoping someone could hook me up with a quick fix. Otherwise, I guess I'll purchase Wireless for Dummies and memorize it. Thanks.
 

A:Broadcom 802.11b/g WLAN connection problems.

If you memorize Wireless for Dummies does that make you Wireless or a Dummy?

If the adapter switched on?
Does it show in Device Manager as "OK"?
In Network Connections does the wireless connection show as 'enabled'?
Do you detect your wireless network?
Exactly what happens when you try to connect?

Have you successfully connected this laptop via ethernet?
 

https://forums.techguy.org/threads/broadcom-802-11b-g-wlan-connection-problems.560636/
Relevancy 83.42%

I recently received a HP notebook 110 which has a WLAN setup ( I believe this is WiFi). At home I use an older computer, a HP a1000n Pavillion with a 56k internal modem and MSN dialup. Is it possible to set up a WiFi station so I can my notebook can access the Internet? I am posting this here because the notebook using Windows 7, though my Pavilion uses XP. If this is the wrong area, please let me know and I will be move to the correct area.

For anybody who wishes to reply, the answers must be complete and with a minimum of jargon so I will be able to understand them. Thanking anyone with helpful information in advance.

Robert Toscani

A:How to set up a WLAN station using dial up connection

In order to do that, you would have to purchase a wireless router and hook it to your internet modem. Can`t you just hook the notebook to your modem with an ethernet cable ? ( no ethernet port ? )The same way you have your pc connected to it ? You won`t be able to use both at the same time but you will be able to get on the internet.

Call your Internet Service Provider, maybe they have a wireless modem.

http://www.sevenforums.com/network-sharing/265388-how-set-up-wlan-station-using-dial-up-connection.html
Relevancy 82.56%

Hello!
I have a very instable WLAN connection on my new PC.
The ping is very high and jittering, and sometimes I lose connection completely.
The distance between the router and the PC is about 3.5 meters, with one wall in between.

At first I thought my WLAN-USB connector is broken, so I installed a PCI network adapter,
but the problem still occurs.
Drivers should be up to date.

Mainboard: Gigabyte 970A-DS3P
Network adaptor: Asus PCE-n15
OS: Windows 7 Professional x64

Thanks in advance!

EDIT: I forgot to mention that my laptop is next to my PC and has a very fine and stable connection
 

Relevancy 82.56%

HI I was just configuring my router settings well really all I did was change the LAN TCP IP Setup - IP Address from back to and now on my PC I am having a great deal of Solved: - DHCP Problems Connection TCP/IP WLAN - trouble mind you everything else in the house still work perfectly fine wireless and wired Router Netgear WGR v Wireless Network Card D-LINK DWL-G REV C Reinstalled -Update with Solved: TCP/IP - DHCP - WLAN Connection Problems error quot Windows found driver software for your device but encountered an error while attempting to install it quot Network Status Unidentified Network No network access Skynet Limited access Windows Network Diagnostics Seems to disconnect the device when going through it s procedures Ends with the Problems found saying quot Wireless Network Connection quot doesn t have a valid IP Configuration Not Fixed -------------------------------- I ran a few things in cmd -reset TCP IP with netsh -netsh dump -netsh winsock reset ----and a few others I think All ipconfig commands Solved: TCP/IP - DHCP - WLAN Connection Problems except ipconfig all do not work states No operation can be performed on Wireless Network Connection while it has it s media disconnected quot It cannot contact my DHCP server I Have given permissions to DHCP through navigation via HKey Local Machine System CurrentControlSet Services DHCP etc Reinstalled TCP IP this is what my ipconfig all displays of my WLAN Wireless LAN adapter Network connection Media State Media disconnected Connection-specific DNS Suffix Wireless LAN adapter Wireless Network Connection Link-local IPv Address fe ef a a ee Preferred Autoconfiguration IPv Address Subnet Mask Default Gateway --------------------------------------------- I need some further help as I am completely stumped and have no idea what to do now and all this of simply changing my routers IP Adress back to it s original state I am completely baffled Thanks in advanced I really do appreciate all the help I can get I have so much work that needs to be done and I require my internet back and running on this PC for my emails and other things Kind Regards Astro P S If I haven t covered something you want to know ask away nbsp

Relevancy 82.56%

Hello Since yesterday but apperently weeks i am having problems with my LAN My quot network quot -icon shows that my LAN has limited connection yellow triangle exclamation mark on it LAN related things - this problem started to occur about a week or two but it was always for a very short period Only yesterday i got DC at and it kept that way whole day Today in the morning i could use LAN only for hour - WLAN is working Either i turn LAN or WLAN or both at the same time WLAN always works and sees all networks in area and is able to connect to all of them - my cable router and modem is working I tried to connect it with other PC and it figured out IP automatically and connection 'limited working 100%) (WLAN LAN problems worked as normal my notebook can see it in wireless networks - I tried using other router and internet provider but it didnt work aswell It router worked with other PC - LAN port s diods non-stop green yellow is turning on and off each sec - it started to work always LAN 'limited connection problems (WLAN working 100%) after i shutted off my notebook for min BUT it also turned on randomly for few LAN 'limited connection problems (WLAN working 100%) min after few LAN 'limited connection problems (WLAN working 100%) hours of work - my PC started to shut down randomly but always after few hours of work weeks ago Or it just froze alt F alt del ctrl Esc didnt work That s when i installed professional antivirus panda which detected viruses Downloader MDW Vilsel Y CI A Generic Trojan Scan was on may Shutdowns started few days before scan but LAN-problems happened after scan - on may i had Windows update all Office parts I couldnt install them before apperently due to virus Update problems started on march month after my previous antivirus Norton Internet Security expired - strangly enough firefox shutdowns started to occur aswell Actions i already performed - resetted replugged router - checked cabels - turned on off LAN adapter - reinstalled LAN Nvidia drivers Updated all other s although they all dated back form - scanned notebook with Panda payed version Norton online and Kaspersky online All is clean except few cookies Notebook specs - Acer - Windows Vista Home Premium bit Service Pack Legal - GB RAM GB active - GB harddrive It s splited into drives each GB st is full nd full - m gs Nvidia video card P S I haven t got any single error problem reboot of my notebook until weeks ago bought on may --------- IPCONFIG all -------- sorry it s french i cannot change to any other language - available in Enterprise Ultimate only Microsoft Windows version Copyright c Microsoft Corporation Tous droits r serv s C Users Herewego gt ipconfig all Configuration IP de Windows Nom de l h te PC-de-herewego Suffixe DNS principal Type de noeud Hybride Routage IP activ Non Proxy WINS activ Non Liste de recherche du suffixe DNS lan Carte Ethernet Connexion au r seau local Suffixe DNS propre la connexion Description NVIDIA nForce Networking Controller Adresse physique - - A- -CB-BA DHCP activ Oui Configuration automatique activ e Oui Adresse IPv de liaison locale fe e a e bda pr f r Adresse d autoconfiguration IPv pr f r Masque de sous-r seau Passerelle par d faut IAID DHCPv DUID de client DHCPv - - - - - D- B- C- - - A- -CB -BA Serveurs DNS fec ffff fec ffff fec ffff NetBIOS sur Tcpip Activ Carte r seau sans fil Connexion r seau sans fil Suffixe DNS propre la connexion lan Description Atheros AR EG Wireless Network Ad apter Adresse physique - - B- -AB-D DHCP activ Oui Configuration automatique activ e Oui Adresse IPv de liaison locale fe c fa a a pr f r Adresse IPv pr f r Masque de sous-r seau Bail obtenu woensdag mei Bail expirant donderdag mei Passerelle par d faut Serveur DHCP IAID DHCPv DUID de client DHCPv - - - - - D- B- C- - - A- -CB -BA Serveurs DNS NetBIOS sur Tcpip Activ Carte Tunnel Connexion au r seau local Statut du m dia M dia d connect Suffixe DNS propre la connexion Description isatap A D -DE F- B - A-E DB br F BCF B Adress... Read more

A:LAN 'limited connection problems (WLAN working 100%)

Hi:You do show a good wireless connection,and a lan connection that is not receiving ip addresses from the modem/ router
Two things:
Try a stack repair:
Stack repair for XP and Vista.
Courtesy of Johnwill of the Networking forum.

TCP/IP stack repair options for use with Windows Vista.

Start, All Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

In the command prompt window that opens, type type the following commands:

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log

Reboot the machine.
the machine.
Then let's see status of lan adapter.
Let&#8217;s take a look at the status of the network adapters

Device manager:

Hold the Windows key and press R, then type devmgmt.msc

Please respond to all the following steps.
1. Under Network adapters, please tell me all the devices listed.
2. Are there any devices under Network adapters that have a red x displayed?
3. Also, are there any devices anywhere in the Device Manager display with yellow ? or ! displayed?
4. should be enabled and working properly.
5. If error code,what is it ?
And just to be sure,let's check this:
From a Johnwill postConfigure DHCP for Windows Vista.
1. Click on the Start menu, and select Control Panel.
2. Click on Network and Internet. (Skip this step if you do not see this Control Panel item.)
3. Click on Network and Sharing Center.
4. Click on Manage network connections.
5. Right click on Local Area Connection and choose Properties. If Windows say it needs your permission to continue, click Continue.
6. Select Internet Protocol Version 4(TCP/IPv4) and click Properties.
7. Select Obtain an IP address automatically.
8. Select Obtain DNS server address automatically.
9. Click OK to close the TCP/IP Properties window.
10. Click OK to close the Local Area Connection Properties window.
11. Click Close to close the Network Connections window.
12. Click Close to close the Control Panel window.
13. Restart your computer.
 

https://forums.techguy.org/threads/lan-limited-connection-problems-wlan-working-100.925384/
Relevancy 82.56%

Hello Ive recently changed my ADSL plus router since the old when WLAN watching resetting connection videos one died and WLAN connection resetting when watching videos decided to finally upgrade to a wlan one The changeover went fine i set up the router with my adsl specific settings and everything was fine for a few days Then i noticed something strange I normally view videos off my main desktop computer using my laptop and it started to im not sure what reset turn off the wlan connection something The video i would be watching would freeze as if lagging and when exiting fullscreen it would give you the message on the bottom right corner that the wlan connection was active as if it had just only now joined it My WLAN is set up protected using WAP and AES WPA key encryption Fragmentation threshold is at RTS threshold is at DTIM interval is at and Beacon interval is at QoS is enabled To be honest Ive only the dimmest idea of what these mean other than QoS as my experience with WLAN is limited Ive tried to see if the problem would be with the media player i was using media player classic but the exact same problem occurs with Windows Media Player Most of the time it seems to repeat every to minutes My router is a TP-link td-w g model m wireless adsl plus router and the laptop im having trouble with is a IBM thinkpad t type using windows XP professional SP fully updated Thank you for any help you could provide for this connection reset only occurs while watching videos i can browse the internet fine and even watch streaming videos fine but for some reason it acts this way P S If theres a thread like this one already I apologize i tried finding one but didnt have luck nbsp

Relevancy 82.56%

I have 135Mbps link speed support ADSL WI-FI router. I have enabled 802.11b+g+n wireless mode and use 20+40 MHz on my router. I use "WAP-PSK" authentication. In addition to that, have a 2.4 & 5 GHz frequency support router and client device.

But my network connection display (WLAN) I have a 54Mbps link speed, why is that? How do I use 135Mbps or at least 100Mbps link speed? Is it a some configuration issue? My Ethernet connection show full speed (100Mbps).

(I'm not talking about my internet connection speed).

A:Help me to use full speed my WiFi connection ( WLAN)

Brand and model of the router and the wifi card or usb thats in your PC might help, thanks.

http://www.sevenforums.com/network-sharing/270919-help-me-use-full-speed-my-wifi-connection-wlan.html
Relevancy 81.7%

I have a Dell 1390 Wlan in an Inspiron 1501 running Windows XP. A few weeks ago we upgraded our Internet DSL from 500 kbps to 3mbps. I'm achiving 3m with a hard connection, but still only 500k via WiFi. To see if it was the wlan card, I installed the software and used my husband's Netgear USB wireless adapter on my Inspiron. With it I get a 3m connection. Shouldn't the Dell 1390 be able to handle a 3m connection? Is there a setting somewhere I need to change?
 

A:Slow WiFi connection w/Dell 1390 WLAN

There should be no reason that your machine can't sustain a 3mbit connection.

Top suspect would be the wireless drivers, update them from the Dell support pages.
 

https://forums.techguy.org/threads/slow-wifi-connection-w-dell-1390-wlan.902008/
Relevancy 81.7%

Ok here is a mind bender for all you Wireless guru s out there I have laptops connected wirelessly to a Linksys router An HP with AMD motherboard a Compaq with an AMD motherboard and a Sony with an Intel motherboard All running Vista home premium My HP will get good signal but the speed of the network drops to mps and than it drops the network all together I have called HP and they sent me a new network adapter same thing I sent the laptop out and they changed the motherboard still AMD chipset still same problem The sony has no problems keeping the full mps at all times I have noticed the Compaq with the AMD also fluctuates in speed too If I take the HP and Compaq to the room the router is in it will keep a connection but still drops the speed as far down as issues HP with Turion series X2 TL-56 dv6000 WLAN AMD connection mps I am still talking with HP about the problem but I am beginning to think they dont know what to do Any suggestions nbsp

A:WLAN connection issues with HP dv6000 series AMD Turion X2 TL-56

It sounds like you're right about HP.
 

https://forums.techguy.org/threads/wlan-connection-issues-with-hp-dv6000-series-amd-turion-x2-tl-56.657010/
Relevancy 81.7%

This has been a problem for a month or so I have a laptop which is connected to a wireless network and a pc which is connected to the laptop via ethernat cable I bridged the connections so I could share the internet connection and the connection is ok except every half an hour or so the connection drops I get disconnected on my pc and on my laptop an error pops up windows has detected an ip address conflict That lasts for a couple of seconds and then it reconnects WLAN connection address Solved: conflict drop/ip and everything is fine I ve searched the forums but couldn t really find the solution Another problem is that I can not restart the router because Solved: WLAN connection drop/ip address conflict it s not in my flat I m not stealing internet i just live as a sub-tenant so the router is in a flat above mine Any help would be much appreciated Also sorry if I made some grammatical mistakes english is not my native language nbsp

Relevancy 81.7%

Hi,

I've setup my father's notebook (Win 7 32Bit) to connect via WLAN to the router. Another notebook is already running on that router (did not tried it parallel at the same time yet).

I've setup SSID (I've made it visible at the router for the initial connection), WPA2 & TKIP incl. password. Router allows additional WLAN devices, IP/DNS etc. should be set by the router.

Automatic connection does not connect to the router. Manual connection seems to work, but shortly after "connecting" I'll get a message to input user and password. I have not seen such a screen in conjunction with WLAN connection before (and I've set-up several devices at different routers). I've tried user and password of the user logged into windows, but this did not work.

Does anyone have an idea ? I've searched the web, but couldn't find a similar situation from anyone else.

Thanks
Joe

A:WLAN network connection asks for user and password ???

I am having a similar problem with a connection between a PC (windows 7) and laptop (windows XP) it asks for user name and password and I do not remember setting up this process. the PC is connected to two other PC with XP and a laptop (MAC) Hope someone can help with this.
Thanks
Sesco

http://www.sevenforums.com/network-sharing/199788-wlan-network-connection-asks-user-password.html
Relevancy 81.7%

This problem is so danged FRUSTRATING I already have a number of devices successfully connected wirelessly to my router which I believe is a Netgear model B - - I recently acquired a desktop PC running Windows and at first it was no problem at all connecting to my router's main SSID named PLEASANT always broadcasts running WEP security plus woes WLAN USB adapter, relocating After connection aplenty MAC address After relocating USB WLAN adapter, connection woes aplenty access control But the USB WLAN device I had was an older quot long thing and I didn't want it sticking out the front where it could be vulnerable to mishap or something so I moved it to a back USB slot Windows gave it a different sequence number plus it always installs some device called quot Microsoft Virtual WiFi Miniport Adapter quot whenever I move it Anyway I could NOT connect to my network then The Troubleshooter tried resetting the adapter and retrying but to no avail Details are available but they're verbose and you cannot Copy the text Something about quot Pre-Association Success quot followed by quot Association Fail quot Why isn't there a utility where I can tell the software to Forget a connection and then later respecify it I tried EVERYTHING I eventually tried renaming my Network's SSID Of course I tried disabling ALL security but still no connection Nothing worked Interestingly my router supports Guest Access which I normally have disabled But I enabled it for this purpose with WPA security and my Windows machine connects to it without a hitch regardless of where I place the adapter But that isn't what I want because Guests naturally cannot get to the router's control page Eventually I purchased and tried a whole new WiFi adapter one of the new tiny ones that don't really stick out I placed it in a front USB slot and it has the very same issue It will connect to my Guest SSID readily but refuses to connect to PLEASANT What I really needed was a sensible configuration utility Aha my new adapter has an installable quot Configuration Utility quot under the Ralink trade name I installed it but Windows puts a giant black quot X quot through the resulting shortcut I cannot run the supplied utility not as Administrator and not with the Compatibility Troubleshooter and no way at all If I could just have that utility software I could get my OS to just plain FORGET the past and start afresh Dang Double dang Just so I've made myself clear both adapters can SEE the Network to which I want to connect plus that Guest access network and each with superb signal strength so I believe there to be NO hardware issues with either adapter It's the software some Windows machination that is preventing my connection At some point I could put the first adapter back in a front slot and it could connect to PLEASANT but now it seems the entire scope is cut off Help What am I to do I doubt it would help but I've attached ipconfig readout I can supply more stuff as it is deemed pertinent And um my router is set up as a bridge edit Sorry using the first adapter that long one I can still place it in the top of my two front USB slots and Windows installs it as WLAN Card and it does successfully connect to PLEASANT But I don't want it there as I stated

A:After relocating USB WLAN adapter, connection woes aplenty

Set all security to WPA2 and check the Advanced tab under ipv4 properties, add the gateway address which is the router ip...
and welcome to the forum!

http://www.sevenforums.com/network-sharing/350754-after-relocating-usb-wlan-adapter-connection-woes-aplenty.html
Relevancy 80.84%

Windows 7 home premium 32bit
zonealarm basic firewall
wlancard dell 1450 usb

Info:
the card never had a vista or windows 7 driver. A computer skilled
took out a folder from the windows xp installer.
Through device manager the folder is installed as driver, and the wlan card works.
I wanted to use ubuntu 'remote terminal server'. Connected via pc to pc lan cross over cable.
Maybe the connection succeded because ping test was ok. But never made the
program 'remote terminal server' work.
At a point zonealarm made trouble, allthough disabled.
Shutting down computer worked.

Error: Next time I turned on the computer, wlan didn't work. The wlan card makes
the connection but there is a yellow triangle on the wifi icon in taskbar.
Under network it keeps hanging, messaging 'identifying'.

I tried this:
Reinstalling zonealarm basic.
Reinstalling wlan card folder driver.
Didn't work.

Now I don't know what to do.
Suggestions?
Thanks.

A:Wlan card hangs (identifying error) during connection to router.

SInce this isnt a supported Win7 wlan adapter, you may be looking at a purchase of a new one. Unless you can get that tech to do his magic again? Or do you have the driver files he used in a folder somwhere still?

http://www.sevenforums.com/network-sharing/191105-wlan-card-hangs-identifying-error-during-connection-router.html
Relevancy 80.84%

I inadvertantly disabled the WLAN connection so that I don't have any way to connect to a wireless signal. It was dumb move on my part - I was trying to remove unwanted icons on the taskbar. I didn't realize the WLAN had anything to do with wireless connections.

Can anyone walk me through getting this going again?
 

Relevancy 80.84%

I downloaded windows 8 on my partner's Toshiba Satellite L650 laptop and now the wireless connection doesn't work.
All other devices get wireless connection but the Toshiba doesn't now after the upgrade.

I've read somewhere that it may need new drivers or something like that, but i'm not tech savvy and wouldn't know where to start.

Can anyone help? I'm using another laptop to post this as there's no connection on the Toshiba.

Thanks

A:Satellite L650 - lost WLAN connection after upgrading to Win8

At first can you please post exact notebook model number (L650-xxx)?
I want to check which WLAN card is inside.

Open device manager and check the WLAN card status. Please post some feedback about these basic information.

https://forum.toshiba.eu/showthread.php?70002-Satellite-L650-lost-WLAN-connection-after-upgrading-to-Win8
Relevancy 78.69%

It's a new HP ID internet Event and 10002 WLAN - AutoConfig no laptop the m - I purchased it about three months ago When I got it I updated the network card directly from Intel to the latest driver When I started having issues around a month ago I reinstalled the OEM driver from HP When awaking my computer Event ID 10002 - WLAN AutoConfig and no internet from its sleep the network card would find my network but it would not connect It would say roughly unable to connect Eventually I can get it to work by deleting and re-adding the connection several times The problem doesn't occur every time I awaken my computer but maybe once every three times There have been some changes in my network I added a wireless extender and set it up on the same SSID I also changed my wireless security from WPA WPA to just WPA I have seen the same problem occur on another Windows laptop in my network When Event ID 10002 - WLAN AutoConfig and no internet running Intel's WiFi troubleshooter it fails on the association test Every time the connection fails I get the following error in Event Viewer Code Log Name System Source Microsoft-Windows-WLAN-AutoConfig Date - - AM Event ID Task Category None Level Warning Keywords User SYSTEM Computer Name -PC Description WLAN Extensibility Module has stopped Module Path C Windows System IWMSSvc dll Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WLAN-AutoConfig quot Guid quot D DD- - - -D BE D D DE quot gt lt EventID Event ID 10002 - WLAN AutoConfig and no internet gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Name -PC lt Computer gt lt Security UserID quot S- - - quot gt lt System gt lt EventData gt lt Data Name quot ExtensibleModulePath quot gt C Windows System IWMSSvc dll lt Data gt lt EventData gt lt Event gt These are my system specifications Code lt lt lt System Summary gt gt gt gt Mainboard HP A gt Chipset Intel Ivy Bridge gt Processor Intel Core i MHz gt Physical Memory MB x DDR -SDRAM gt Video Card Intel R HD Graphics gt Hard Disk Hitachi HTS A E GB gt DVD-Rom Drive Hewlett-Packard DVDRAM GU N gt Monitor Type inches gt Network Card Realtek Semiconductor RTL PCIe Gigabit Ethernet Adapter gt Network Card Intel Centrino Wireless-N gt Operating System Windows Pro with Media Center Professional Media Center -bit gt DirectX Version gt Windows Performance Index on Any help would be greatly appreciated

A:Event ID 10002 - WLAN AutoConfig and no internet

Can you go to device manager and right click your wireless NIC > Properties

Then click on the 'Power Management' tab and then ensure that the following boxes are unchecked like mine below:



Since this is relating to a core service (WLANautoconfig) can you run a full system scan with your A/V and Malwarebytes and ensure that your machine is free from malware

Malwarebytes : Free anti-malware download

Hope This Helps,
Josh

http://www.eightforums.com/network-sharing/29328-event-id-10002-wlan-autoconfig-no-internet.html
Relevancy 78.69%

I have an ACER Aspire 5920 laptop (vista) that up until yesterday I've never had any problems with.
It now connects to the BT hub but doesn't actually connect to the internet - also, plugging in the lan doesn't connect me either. I've restarted the Hub I don't know how many times, but my other computer still connects perfectly, which makes me think it's a problem with the laptop..
Help would be awesomeeeee
 

Relevancy 78.69%

I have a PC running Win XP Pro and a laptop acer aspire running Win XP Home Both have wireless adapters installed and working When I connect them via crossover cable it all works wonderfully File sharing and internet works great The PC connects to the internet through ethernet adapter which connects to a cable modem HOWEVER when i set up a peer to peer ad hoc wireless network the file sharing works fine however the internet does very strange things Certain websites work fine such as google Internet crossover, not but WLAN! works over through fine bbc co uk and certain others however others just don t load at all Messenger doesnt work outlook doesnt download e-mails and no videos or Internet works fine over crossover, but not through WLAN! programs will download I have tried this with my friends laptop too same make Internet works fine over crossover, but not through WLAN! and the same thing happens I have tried changing the MAC address and playing around with the ip addresses but not being an expert i dont really know what i am doing If you have heard of Internet works fine over crossover, but not through WLAN! this problem and know how to sort it please let me know cos this is driving me insane Thanks

A:Internet works fine over crossover, but not through WLAN!

Sounds like you need a router. The things you mention need to be able to reach the specific ip addresses of the two computers.

http://www.bleepingcomputer.com/forums/t/17762/internet-works-fine-over-crossover-but-not-through-wlan/
Relevancy 78.69%

I recently upgraded my old computer and wiped the whole thing to make it new and fresh i installed all of the drivers for everything in this case i already installed the internet cable port driver and it never seems to work i plug the cable in and it says no connection iv troubleshooted the lot and got a new cable but it don't seem to work i have tried so much but i still don't know the problem, it could be something to do with the motherboard but i have had a look and its fine. Thank you for reading and please get in contact because all advice helps.
 

Relevancy 77.83%

WLAN network connectivity keeps dropping.  Need to restart WLAN adapter to reaccess internet.  Occurs frequently - every 15 mins when on line. Realtek RTL8188EE 802.11 bgn network adapter driver is up to date.

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Pavilion-wlan-adapter-keeps-losing-internet-connectivity/td-p/5792099
Relevancy 77.83%

Can anyone help, I am with AOL and have been for a long while now. Since about July I have been having problems maintaining my internet connection. sometimes I can get on and the wlan light remains lit then it starts flashing and off goes my internet connection, for the last two weeks everything was fine then two nights ago off it goes again. I try ringing AOL and go through all the checks and get cut off about 3 times before they transfer me to talk talk who put me in a queue and don't answer. does anyone have a solution for this, i'm paying aol for a service i can't use and can't afford either the time or money to be on the phone for 2 hours at a time. Tammy x
 

A:d-link router losing wlan connectivity to internet

Does the loss of connection happen regularly?

Are you at a location where wireless signals may not reach your PC? Walls, distance in general, other devices, and a billion other things can cause interference and a loss of wireless signal. You may want to purchase some "boosters" for your wireless router.

If your connection is dropping and you're right next to the wireless router, then there may be another problem.
 

https://forums.techguy.org/threads/d-link-router-losing-wlan-connectivity-to-internet.962200/
Relevancy 77.83%

my eee pc wont let me use the function f2 to turn on my wlan so i cant connect to the internet wirelessly please anyone have any tips to help me ?

A:my eee pc wont let me switch on the wlan to recive internet wirless

and welcome to the Forum

What exactly happens when you attempt to turn the wireless on?

http://www.techsupportforum.com/forums/f10/my-eee-pc-wont-let-me-switch-on-the-wlan-to-recive-internet-wirless-475036.html
Relevancy 77.83%

Hello, I have an Acer Aspire R1600 desktop, OS XP Home. The specifications says LAN: Gigabit Ethernet, Wake-on-LAN ready WLAN1,2: 802.11 b/g/Draft-N, but it does not connect to the internet wireless. I went to the control panel and tried to confirgure it but it is not working. Can someone help me, please?/.

Thank you

Carlos
 

A:Acer Aspire R1600 NOt Connecting to the Internet via WLAN

can we see a few things - also make and model of the router
is anything connected to the wireless and working OK
is the wireless secure and when you connect asking for a passcode

otherwise if we could see the following information

------------------------------------------------------------------------
{ipconfig /all}
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here
We would like to see the results from ipconfig /all post back the results here
-> Start
-> (XP - enter the following in the RUN box)
cmd /k ipconfig /all
-> (Vista or Windows 7 - enter the following in the Search box)
cmd /k ipconfig /all

A black box will appear on the screen -
rightclick in the box
select all
enter
control key + C key - to copy

then reply here and
control key + V to paste
------------------------------------------------------------------------
------------------------------------------------------------------------
{run Xirrus Wi-Fi Inspector} Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

http://www.xirrus.com/library/wifitools.php
Direct link to the program is here http://www.xirrus.com/library/wifi_download_redirect.php
Then run and install the program
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
------------------------------------------------------------------------
{Device Manager}
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X
post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
------------------------------------------------------------------------
 

https://forums.techguy.org/threads/acer-aspire-r1600-not-connecting-to-the-internet-via-wlan.959820/
Relevancy 77.83%

My colleagues and I have the following setup in our project office. We installed a wireless router with a NAS for daily backup purposes. The router is not connected to the internet. To get online, each of us have a mobile broadband dongle plugged in our laptops.

The strange thing is that some of us can use the wifi-connection and mobile dongle simultaneously, but some of us can't. For those who can not, their laptop is searching for an internet connection at the router's address, and not at the dongle's, and obviously fails. They can only connect to the internet if they disconnect from the router, which we don't want because it interferes with the automated daily backups. Any idea on how we can set the dongle as priority internet connection, or something? We all use Windows 7.
 

A:Can't use WLAN w/o internet in combination with mobile broadband dongle

https://forums.techguy.org/threads/cant-use-wlan-w-o-internet-in-combination-with-mobile-broadband-dongle.999962/
Relevancy 77.83%

Hello,
I need some help please!
I have a Dell D420 and the Radio switch on the side is on the on position ((I)) but I am not able to get online...
The 1394 Net Adapter icon in the control panel shows me "Connected, Firewalled", but when I open the Dell WLAN Utility the Radio check box keeps reverting to Un-checked and the "Link Status" tab tells me my Radio is disabled... Why?
My laptop was picking up this wi-fi signal just fine till I came back from a trip to India where I had installed a Reliance little USB internet sim card to get on the internet there... I uninstalled that Reliance program, thinking it might have messed something up(?) but I'm still having the same problem...
Thanks so much for your help with this!!!
 

A:Dell WLAN Utility says I'm disabled, but I'm not! --Can't access internet :(

https://forums.techguy.org/threads/dell-wlan-utility-says-im-disabled-but-im-not-cant-access-internet.1116022/
Relevancy 77.83%

Hey there everyone So earlier today I purchased a new video card a PNY Nvidia to disconnected WLAN Internet/Wireless Adaptor Cannot connect Gtx After installing the drivers through the disc I ended up getting he BSOD and my PC just kept on restarting automatically I fixed that problem and found out that I should install the drivers for it through their website instead So after restarting my PC yet again I tried using the Internet Chrome and found out that I have no Internet connection Now I am writing this on my iPad using the same router and modem that Cannot connect to Internet/Wireless WLAN Adaptor disconnected my PC is supposed to be using but I keep on checking my WLAN adaptor and it says that it is Not Connected Now I have tried every forum every post EVERYTHING related to this problem and not a single thing fixes it Also when I do the ipconfig everything says Media Disconnected and that s it If any further info is needed to help me out use comment below Thanks for all your help PS I tried unplugging plugging back in my modem and router PPS Is it possible that when installing my new gcard and psu that I may have messed up with something internally nbsp

Relevancy 77.83%

Hi guys After several hours in vain searching the internet for a similar case - and its solution I now turn to you The source of my problem the way I see it is my SMC router SMCWBR T-G WLAN router to stops internet? working is if connected My problem is that my two computers my wireless music player cannot connect to the wireless network whenever the quot internet cable quot is plugged into the WAN socket of the router If I unplug the quot internet WLAN stops working if router is connected to internet? cable quot and restart the router all of the devices connect just fine My ISP WLAN stops working if router is connected to internet? has told me that the router computer whichever is connected to the quot internet cable quot has to be configured to obtain a dynamic IP address which it already was This problem started when I moved from my previous apartment to my current In my previous apartment with another ISP the router wireless network worked just fine I can thus conclude that the router worked works fine If I plug the quot internet cable quot directly into my laptop I have working internet access This means that I have working internet To summerize My router works fine if correct conditions are present and I have working internet A friend told me it might have something to do with the ip address the router receives from my ISP which makes the router unable to provide valid ip addresses for my wireless devices If this is the case I still do not know how to solve the problem My question is What should I do to make the router establish a working wireless LAN WITH the quot internet cable quot plugged into the WAN socket My operating system on one pc is Win XP professional and on the other it is Win XP Home nbsp

Relevancy 77.83%

Hi I recently bought a HP s laptop from ebuyer co uk and have spent the day setting it up However the wireless access to the internet is temperamental It refuses to connect and I can t even access the router page I m using a BT Home Hub I restarted my router and won't to on connect laptop Vista Solved: internet HP WLAN then the laptop connected fine to it and the internet However I had to restart my laptop for updates and when it Solved: HP Vista laptop won't connect to internet on WLAN rebooted it refused to connect to the network and internet just as it had done in Solved: HP Vista laptop won't connect to internet on WLAN the first place When I check the network details it Solved: HP Vista laptop won't connect to internet on WLAN tells me the IPv and IPv is quot Limited quot I did some research and found somewhere that Vista isn t too great with wireless connections The built-in wifi is a Broadcom b g set up but apart from that I haven t found anything else out If I connect via Ethernet cable I can access the internet fine but I still can t connect wirelessly Any help would be greatly appreciated Tom nbsp

A:Solved: HP Vista laptop won't connect to internet on WLAN

Changes that may help to increase the compatibility of Vista with older networking devices:

Disable the IP Helper service:

1. Hold the Windows key and type R, enter "services.msc" (without the quotes) and press Enter
2. Scroll down to the IP Helper service, right click on it and select Properties
3. In the dropdown box that says "Automatic" or "Manual", set it to Disabled and then click on "Apply"
4. Then click on "Stop" to stop the service from running in the current session
5. Click OK to exit the dialog

Disable IPv6:

1. Hold the Windows key and type R, enter "ncpa.cpl" (without the quotes) and press Enter
2. Right click on each network connection and select "Properties"
3. Remove the checkmark from the box next to "Internet Protocol Version 6 (TCP/IPv6)
4. Click OK to exit the dialog

NOTE: You should do this for each network connection.

Disable the DHCP Broadcast Flag:

Link: http://support.microsoft.com/default.aspx/kb/928233

Hold the Windows key and type R, enter regedit and press Enter.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{GUID}
In this registry path, click the (GUID) subkey to be updated.
If the key DhcpConnForceBroadcastFlag does not exist, use the Edit menu, point to New, and then click DWORD (32-bit) Value. In the New Value #1 box, type DhcpConnForceBroadcastFlag, and then press ENTER. If the key exists, skip this step.
Right-click DhcpConnForceBroadcastFlag, and then click Modify.
In the Value data box, type 0, and then click OK.
Close Registry Editor.
NOTE: You should do this for each and every GUID subkey.
NOTE2: (GUID) is a mnemonic for the individual subkeys, the actual text "GUID" does not appaer.


The only program I'm aware of that currently relies on IPv6 is the new Windows Meeting Space. The first 2 changes will cause that program not to work - but will leave all of your normal (IPv4) connections unaffected. If it causes problems that you can't overcome, simply revert back to the original settings.
 

https://forums.techguy.org/threads/solved-hp-vista-laptop-wont-connect-to-internet-on-wlan.793951/
Relevancy 76.54%

I m having problems connecting some devices android apps to my computer via my wi-fi I am usually able to solve the problem by running network diagnostics but after awhile I ll start having network connectivity problems again Whenever I run diagnostics in these situations this error is shown in Event Viewer quot WLAN Extensibility Module has stopped Module Path C Windows system athihvs quot I also receive the error in event viewer on a fairly regular basis quot Your computer was not assigned an address from the network by the DHCP Server for the Network Card with network address x in diagnose Module Receiving time wireless stopped." "WLAN Extensibility I Event Viewer connection warning each has D CC The following error occurred x Your computer will continue to try and Receiving warning "WLAN Extensibility Module has stopped." in Event Viewer each time I diagnose wireless connection obtain an Receiving warning "WLAN Extensibility Module has stopped." in Event Viewer each time I diagnose wireless connection address on its own from the network address DHCP server quot I have checked and my router and WLAN card drivers are both up to date I m wondering if these errors are what is causing my app to lose connection and what I could do to solve the problems Thanks

A:Receiving warning "WLAN Extensibility Module has stopped." in Event Viewer each time I diagnose wireless connection

It may have more to do with the firmware for your wireless adapter than it has to do with the drivers.
Check your PC or laptop manufacturer's website for a firmware update for the wireless adapter.

If they don't have one, check the wireless adapter manufacturer's website instead.

http://www.bleepingcomputer.com/forums/t/391859/receiving-warning-wlan-extensibility-module-has-stopped-in-event-viewer-each-time-i-diagnose-wireless-connection/
Relevancy 75.25%

This morning I went to go on to the internet and it says it can't connect to a network. I've never had this problem before so I clicked on the network and it said it couldn't detect any.

When i clicked on "diagnose the problem" it says "there are driver or hardware problems with the network adapter "dell wireless 1390 WLAN mini-card" on this computer.

I have a Dell Inspiron 640m

I can find the cord to hook it up to the internet with a wire (I can buy one if absolutely needed) and I do have the original software CD.

I not good with computers so if anyone can help me out I would appreciate it.

Thanks.
 

A:Laptop won't connect to internet...dell wireless 1390 wlan mini-card.

Hi:Take a look at device manager,particularly the WLAN card.Any error indicators?
Let&#8217;s take a look at the status of the network adapters

Device manager:

Hold the Windows key and press R, then type devmgmt.msc

Please respond to all the following steps.
1. Under Network adapters, please tell me all the devices listed.
2. Are there any devices under Network adapters that have a red x displayed?
3. Also, are there any devices anywhere in the Device Manager display with yellow ? or ! displayed?
4. should be enabled and working properly.
5. If error code,what is it ?

It would be best if you could post a screen shot of Device Manager with the Network adapters and Other devices sections expanded.

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file. To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.

Also.Go to the Dell site.Search the drivers available for your particular model by inputting the service tag # for your unit.Should be on a side or bottom tag along with model and serial #.This will make it a lot easier to determine the proper driver(s) to download/install

Also,let's see this:
Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

https://forums.techguy.org/threads/laptop-wont-connect-to-internet-dell-wireless-1390-wlan-mini-card.971210/
Relevancy 73.53%

My dad just bought a new wireless router and out of our computers mine is having a problem My computer is a Dell Vostro with a Dell Wireless WLAN Mini-Card I am able to connect to the connection but not stay online I am not sure in what intervals I am being disconnected but it is super frustrating haha It seems my 1390 Issues Wireless Mini-Card- Wireless Connection WLAN Dell connection status is stuck on Authenticating I hope someone can help me I am quite unfamiliar with troubleshooting networking outside of Dell Wireless 1390 WLAN Mini-Card- Wireless Connection Issues the simplest tasks Thank you in advance for any help Also I read an old post about someone else with a very similar problem and someone had said quot Start Run CMD OK to open a command prompt Type the following command IPCONFIG ALLRight click in the command window and choose Select All then hit Enter Paste the results in a message here quot So trying to maybe help find a solution sooner here are my results Microsoft Windows XP Version C Copyright - Microsoft Corp C Documents and Settings Sherry Berry gt ipconfig Dell Wireless 1390 WLAN Mini-Card- Wireless Connection Issues all Windows IP Configuration Host Name Sherry Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List hsd nj comcast net Ethernet adapter Wireless Network Connection Connection-specific DNS Suffix hsd nj comcast net Description Dell Wireless WLAN Mini-Card Physical Address - D- -B - C- C Dhcp Enabled Yes Autoconfiguration Enabled Yes IP Address Dell Wireless 1390 WLAN Mini-Card- Wireless Connection Issues Subnet Mask Default Gateway DHCP Server DNS Servers Lease Obtained Monday January PM Lease Expires Tuesday January PM Ethernet adapter Local Area Connection Media State Media disconnected Description Broadcom x Integrated Cont roller Physical Address - D- -A - -B C Documents and Settings Sherry Berry gt nbsp

A:Dell Wireless 1390 WLAN Mini-Card- Wireless Connection Issues

Hi:Is this ipconfig /all at failure time ?
Try two things.
Go to the router makers site and download any more current firmware for your model.
Change the wireless channel being used.1/6/11 are US preferred.
Also:
1. Update the network drivers (wired and wireless) on your computer to the latest available.from your pc maker&#8217;s web site
 

https://forums.techguy.org/threads/dell-wireless-1390-wlan-mini-card-wireless-connection-issues.895391/
Relevancy 70.09%

Hello Short story even shorter there was a semi-power outage this morning lights were very dim but power wasn Linksys - WRT54G ALL. via internet Solved: light access WLAN AT no off router router t totally off and when the power came back on my router stopped working Here s what I know -The WLAN LED is no longer lit so there s no wireless That orange CiscoSystems button is no longer glowing orange either if that means much -For some odd reason a Solved: Linksys WRT54G router WLAN light off - no internet access via router AT ALL. wired connection through any of the ethernet ports on the router no longer works either though the LED s still light up when connected along with the internet LED -The modem works fine I m connected to the internet directly from the modem right now -I ve tried to reset the router but it doesn t seem to do anything -I ve tried to access the router config settings and the page doesn t load -I ve tried to look up the routers ip address through the command prompt but when I enter the command quot ipconfig quot when I m wired through the router I always get the response something along the lines of quot media disconnected quot When I try the command when connected directly to the modem the default gateway ip address comes up as This doesn t work either I ve been searching the web for solutions for hours and I can t find one This is actually the first time I ve ever had to post a thread asking for help and I ve experienced a slew of computer problems over the years lol It may very well be that the router is fried but I m just trying to exhaust my options I ll appreciate it to no end if someone can help me solve this problem in a way that doesn t require me to buy a new one lol Thanks nbsp

A:Solved: Linksys WRT54G router WLAN light off - no internet access via router AT ALL.

https://forums.techguy.org/threads/solved-linksys-wrt54g-router-wlan-light-off-no-internet-access-via-router-at-all.960352/
Relevancy 70.09%

I installed my wireless router/modem with no problems and am currently sharing an internet connection between two laptops in my house. I also want to share files between these two computers, but i am not shure as to how to do it. I looked at tutorials on the net but they don't really give step by step info. The main question would actually be: If my computers share internet from the same wireless router/modem unit, are they arleady connected to a wireless network i can also use to share files? or i have to build up a separate network (different from the one that my router makes for sharing internet)?
help would be appreciated!
thanx in advance,
bassfreak
 

A:WLAN question:how do i set up one for sharing folders?(internet sharing working fine)

What operating systems are involved? Try this site:
http://www.practicallynetworked.com/sharing/xp/filesharing.htm

By the way, ciao from Vicenza.
 

https://forums.techguy.org/threads/wlan-question-how-do-i-set-up-one-for-sharing-folders-internet-sharing-working-fine.662158/
Relevancy 68.8%

Hi all,

Just curious, but I thought that my WLAN's internal IP address for my computer (192.168....) was not accessible from the internet, only my router's internet IP address could be seen. But if you go to www.whatsmyip.org, and click on their "more info about me" option, it shows my internal WLAN address, as well as my router's internet IP.

So.... is it my Internet Explorer that provides this info to them, or how do they query for this info? I'm just a little concerned for security reasons.

Thanks for any help!
 

A:internal WLAN IP address VS. external internet IP address

If your computer's IP did not go along as part of the packets that go to an internet site (say, one that requests www.whatsmyip.org to return your info, how would the response get back to you?

It's very similar to wanting somebody to return your phone call or respond to your letter--you need to give them your phone number or mailing address.
 

https://forums.techguy.org/threads/internal-wlan-ip-address-vs-external-internet-ip-address.607618/
Relevancy 68.8%

I recently brought an unused Win PC home from to browse Internet" can't but WLAN "Connected work and I am trying WLAN "Connected to Internet" but can't browse to get it connected wirelessly to my network I plugged in a USB wireless adapter which works in other PCs and connected to the network In the Sharing Center it shows that it is connected to the internet and I can ping websites successfully However I can not browse the Internet or download Windows updates Other wireless devices on the network have no issues and everything works fine if I switch to a wired connection I've tried switching between static and dynamic IPs and manually set my router to allow the device even though it says it automatically did so I have even gone through BIOS settings to ensure nothing is interfering with WLAN "Connected to Internet" but can't browse WLAN connections I am running Windows update as it is a fresh install but I'm not hopeful that it will change anything WLAN "Connected to Internet" but can't browse as I have not required updates before when using this adapter in other PCs Any pointers would be appreciated EDIT Windows Update operation is not functioning whatsoever even with an Ethernet connection EDIT TL DR Unchecking quot Automatically Detect Settings quot in the LAN Settings corrected this issue

A:WLAN "Connected to Internet" but can't browse

To collect IP configuration information easily, do the following:

Open a Elevated Command Prompt:

XP, Vista or Windows 7:

Click on the Start button and type cmd.
DO NOT press Enter or click Go.
Look at the upper part of the window and you will see cmd.exe.
Right click on it and select Run as Administrator.

Windows 8 or 8.1:

Press WIN + X to open Start context menu.
Select Command Prompt (Admin)​.

Paste the following into the Command Prompt window, exactly as shown, including double quotes:

cmd /c "ipconfig /all > postme.txt & ping yahoo.com >> postme.txt & reg query "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" >> postme.txt & notepad postme.txt & del postme.txt"

and press ENTER.

A file will open in Notepad. Please copy and paste the contents here. Close the Notepad window and the file will be deleted and the Command Prompt window will also close.
Also check to see if a Proxy has been setup and if so, remove it.
Open IE, click on Tools or the Gear icon at top right then Internet Connections.
Click on the Connections tab then the Lan Settings button.

http://www.sevenforums.com/network-sharing/370584-wlan-connected-internet-but-cant-browse.html
Relevancy 66.65%

Hi.
I have a wireless adapter: Technical data - Edimax BR-6424N - Broadband router
and a USB wireless adapter: Edimax EW-7717 Un WLAN USB adapters Online mail order service for electronics and multimedia TECHNIKdirekt.de
Both by Edimax.

in this image you can see that I don't have N like the guy below me, how come?
Thanks.
Gil.

A:Why do I get G in WLAN instead of N?

Useful links for you to look through.

Edimax BR-6424n - Wireless IEEE802.11 b/g/n Broadband Router
http://www.edimax.co.uk/images/Image...-Manual_EN.pdf

Edimax EW-7717Un - Wireless 802.11n USB Adapter
http://www.edimax.co.uk/images/Image...anual-0710.pdf

I've had a quick look through the manuals. Check the Wireless mode setting of your USB adapter. The available options are 802.11 B/G mix, 802.11 B only, and 802.11 B/G/N mix (p56 of the PDF manual).

http://www.sevenforums.com/network-sharing/75821-why-do-i-get-g-wlan-instead-n.html
Relevancy 66.65%

My WLAN will not connect when i press the button it says No Wireless Device,I checked Device Manager and the only thing in my Network Adapters is NVIDA nForce10/100/1000 Mbps Ethernet#2.When i do a search it finds Broadcom 802,11g Network Adapter and when i read its script it says Device Not Found The Device may not be present or could have been ejected/unplugged from the system.I am at a loss please help
 

Relevancy 66.65%
Q: Wlan

Hi,
I have a Dell Inspiron 1501 laptop in my office and it has 'Dell 1390 WLAN Minicard # 2' . I want to create a wireless network in my office using A/B/G/N Router. Here my doubt is can I connect the laptop to the router and browse the Internet wirelessly?
Thanks in advance.
 

Relevancy 66.65%
Relevancy 66.65%

Hey, I'm using Windows Vista and i have annoying lagspikes when gaming which really tick me off.What would you recommend.Vista Anti Lag - http://vista-anti-lag.software.informer.com/WLAN Optimizer - http://www.martin-majowski.de/wlanoptimize...d=2&lang=enThank you for your time!

A:VAL vs WLAN

i would test both and pick and keep the one that suits you best and works the best. "The best choice comes from experience"

http://www.bleepingcomputer.com/forums/t/307883/val-vs-wlan/
Relevancy 66.65%
Q: Wlan

I am trying to connect to the internet by WLAN. Seem to have no luck.

Laptop spec;
Acer EX5620Z
Microsoft Windows Vista Home Premium
Data Link Protocol; IEEE 802.11b, IEEE 802.11g

The router brand is Netgear.

Other people in the household can connect to the router but not myself. Any further details, please advise to get this sorted.

Thank you
 

Relevancy 66.65%

I am on a boat near a club which provides g access to their LAN via a Linksys WAP g gt amplifier gt external antenna Aboard the boat I have an external antenna lt amplifier lt Linksys WET g lt Linksys WRT GP The system on my boat was installed by a friend of a friend I can often connect to the club s WLAN but the operation of this system is awkward In terms of challenge this is way more complicated than just having a high output wifi card plugged into my laptop with a pigtail to the external antenna On the other hand I am getting nearly connection quality much of the time and I no longer have to deal with so many cables on the laptop Specifically I have some questions about the setup and configuration of this system I have made some screen captures of configuration panes on the laptop and wonder if I might be able to entice someone to review them This setup is not something you d see all the time I d imagine I could also take some screen caps of the Linksys WET G and WRT GP to share I am a novice to networking and it may be just some elementary oversight that is making this configuration more complicated than it needs to be I would really appreciate if I could make contact with WLAN WLAN to someone on this forum who is open to considering this setup so I can email a system diagram and screen caps I read somewhere on this thread that someone wanted to see the results of ipconfig all gt c results txt Here is what I get from that Windows IP WLAN to WLAN Configuration An internal error occurred The operation completed successfully Please contact Microsoft Product Support Services for further help Additional information Unknown media status code On the other hand when I run the Diagnostic Tools from the Lenovo ThinkVantage quot Access Connections quot application I see the following Physical address mac address of my laptop s built-in wifi adapter IP address Subnet mask Default gateway DNS servers this was specified in configuration This indicates that I am pulling an IP from the shoreside connection that isn t the issue really The questions begin when I am sometimes not able to pull an IP from that on-shore LAN I think if WLAN to WLAN I enable DHCP on my router won t I lose the ability to connect to the wireless bridge I have to use the built-in web style configuration utility in the bridge to survey and connect to the shoreside network sometimes travel with the boat so I have that configured at The wireless router is set at I don t know what else to provide Thank you for your interest nbsp

Relevancy 66.65%

So I got this WiFi adapter from EnGenius and it says it's missing a 802.11 n WLAN driver and I can't find it. Can someone help?

A:802.11 n WLAN

Hi: What is the model # of it? Also, please post the hardware ID for the device. To find the hardware ID, go to the device manager and click on the 802.11n device needing the driver. Then click on the Details tab at the top of the device window. Now you will see a Property drop down list, and it will be set to Device Description. Drop down on that list and select the 2nd item (Hardware ID's). Post the top string of characters that you see in the window.  

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/802-11-n-WLAN/td-p/5805530
Relevancy 66.65%

Hello All.

I have a Verizon FIOS Router in my basement on 192.168.1.x and I use its wireless signal for my laptop. Recently my wife made our 2nd floor guest room into a business room and now we want have a ethernet printer, desktop, and a laptop to connect to the network in the basement.

I'd like to save on cost and try to connect the two areas through a wireless connection. I have a WRT-54GL from a while ago. Is there a way to bridge this thing to the FIOS router in the basement? Ultimately, I want this WRT to act as a hub/switch for the ethernet devices and route the data to/from the FIOS router using wireless.

How would one go about this? I saw some information that said its doable with DD-WRT but I wanted to see what information I could get here first.

Thanks!
 

A:WLAN to WLAN

DD-WRT is probably the way to use that router for a wireless bridge, it won't do it with the native firmware.
 

https://forums.techguy.org/threads/wlan-to-wlan.895958/
Relevancy 66.65%

Sorry to interrupt this thread but I WLAN WLAN to (2) have a very WLAN to WLAN (2) similar problem and thought I d share my experience I am trying to set my parents up with access to a wireless signal near them I can successfully connect to this with my laptop and decided to purchase a WET G bridge to enable their PC to connect - the PC cannot connect wirelessly as the signal is too weak in their lounge I have placed the nridge in the loft and have it connected to a directional external antenna I have a m Ethernet cable WLAN to WLAN (2) leading from the WLAN to WLAN (2) bridge to the PC All three LEDs on the bridge are lit - I believe this indicates power supply ethernet connection and that the bridge is connected to the wireless network The problem is at the PC end I think The connection has Limited or no connectivity I also can t access the web config of the bridge via the ethernet connection The web config page is only available when actually connected to the wireless network - same problem Wirelessboat is having I don t understand why I can t access this config page when directly connected via the ethernet cable Do I need to give the PC a static IP I have tried giving the bridge a static IP of but it is not accessible through the web browser Linksys technical support were useless Any help much appreciated and sorry again for butting in on Wirelessboat nbsp

A:WLAN to WLAN (2)

Even though it appears you're having the same problem, please start a new thread. It's very difficult to keep two problems straight and who's working on what in a single thread. Thanks for your cooperation.
 

https://forums.techguy.org/threads/wlan-to-wlan-2.459350/
Relevancy 66.22%

hey lads hows going thats my first post here in the forum and hope i ll get some help am sure i will anyway my problem is i have a laptop its made by TARGA its german made anyway i own this laptop for more than a year but last week just had my broadband wireless and this laptop had a built in wireless network g MiniPCI Wireless Network Adapter Ralink Chipset RT i have a wireless network at home my laptop wont pick any WLAN How To?? RT2500 thing for the wireless not even in college or friends house that have wireless network but if i used my dad laptop which its same made works fine no bother i have tried everything How To?? RT2500 WLAN but nothing help me but i think maybe i should turn on my wireless How To?? RT2500 WLAN network its some configuration that i must do but i dont know where and how so if anyone knows anything about this plz let me know thnx a lot nbsp

A:How To?? RT2500 WLAN

Do you have the drivers installed for your wireless adapter? Some laptops have a switch that you have to use to activate the radio. You may also need to use some special wireless software instead of the Windows builtin.
 

http://www.techspot.com/community/topics/how-to-rt2500-wlan.39991/
Relevancy 66.22%

About a month ago I bought a Dell Latitude D520 running WindowsXP
with a pre-installed Intel PRO/wireless 3945 WLAN card.

It worked fine for about a week and then it quit and never
came back. Dell replaced the card and motherboard but no
change. I reinstalled the driver (R138747.exe), no help. I
reinstalled WindowsXP, still no help.

Dell seems about out of ideas.

No, it's not the router. I use the router every day
with several other computers, It runs fine.

So it's beginning to feel like I just bought
a very expensive paper weight. Without a wireless
connection I can't use the computer.

I can think of one possible reason for the problem,
but I don't know if I'm right. The other computers
that I use with my wireless connection don't have
service pack 2. Could that be the reason I can't
connect?

Any ideas would be extremely welcome.
 

Relevancy 66.22%

I have 2 laptops on a wireless LAN sitting side by each. One always shows signal strength as excellent. The other (HP ProBook 4510s) shows it anywhere from poor to very good - depending on when I look. They are located 3 rooms from the Linksys Wireless G Broadband Router (Mod WRT54G V8) - about 60 feet. Up until now, the ProBook always had excellent signal strength. Any idea on what's going on?

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Celeron(R) CPU 900 @ 2.20GHz, x86 Family 6 Model 23 Stepping 10
Processor Count: 1
RAM: 1976 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1024 Mb
Hard Drives: C: Total - 150562 MB, Free - 118078 MB; D: Total - 2051 MB, Free - 1977 MB;
Motherboard: Hewlett-Packard, 3072
Antivirus: Microsoft Security Essentials, Updated: Yes, On-Demand Scanner: Enabled
 

Relevancy 66.22%

Hi there, I need a WLAN driver for the card on in HP Mini laptop. It's an old one but I just re-installed it and need the driver for the internet. TheWLAN FCC ID is: QDS-BRCM1050.  Thanks in advance.

A:Need WLAN Driver

Hi: See if this driver works... This package contains drivers for the supported Broadcom Wireless LAN Adapters in the supported notebook/laptop models and operating systems. File name: sp57965.exe

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Need-WLAN-Driver/td-p/5786970
Relevancy 66.22%

Hi,

Ok well I reformatted my laptop (specs in sig). I deleted everything so its all wiped. My wireless internet does not work now. It doesnt recognize wireless connection at all, I have a apple network base station which worked perfectly before I reformatted it.

Does anyone possibly have a driver so I can reinstall it?

http://www.techsupportforum.com/forums/f10/802-11b-wlan-utility-usb-85673.html
Relevancy 66.22%

After being prodded on several occasions by several sources, I decided to take the plunge and install SP2. After doing so, my laptop booted fine, but could not make a wireless LAN connection. I live for WLAN, and I don't think I could take it if I couldn't have it anymore. :dead:

ANy suggestions?:blackeye:
 

A:SP2 horror (no Wlan)

Check for newer drivers?
 

http://www.techspot.com/community/topics/sp2-horror-no-wlan.15705/
Relevancy 66.22%

hi all!
when my windows 7 (64bit) wakes up after standby it does not connect to the wlan network anymore. only if i hit disconnect/reconnect i can be online again. any ideas?
thanks for reading
markus

A:no wlan after hibernate

Have you tried changing the power settings for your NIC?

http://www.sevenforums.com/network-sharing/134834-no-wlan-after-hibernate.html
Relevancy 66.22%

Yesterday, I installed my wireless router (linksys WRT120N) and set up a wlan. It was working fine, (I have 4mbit/512) but today It doesn't want to download with more than 150kb/s. It's really weird, yesterday I was downloading with approximately 400-500kb/s! And connection often disconnects.

Do you have any suggestions?
 

A:Wlan troubles

So,it is kind of hard to tell from your description.
Maybe,the results of a speed test might be helpful.With those results,please tell us what speed you are paying for.
The speed test should be when you feel it is slow.
http://www.speedtest.net/
The other thing you could try,is,boot in safe mode with networking and see if it is still "slow"?
If this is a wireless connection,have you tried it hardwired to the router.?
The other thing you could try is changing the wireless channel.1/6/11 in US.
If no joy in any of this,we will have to probe a bit more.
 

https://forums.techguy.org/threads/wlan-troubles.937578/
Relevancy 66.22%

Hey I have a satellite a665-d6082 latop and my device manager shows that my wireless/bluetooth card is on and functioning properly, but seems like it can't scan for connections. it has a red x on both adapters in my networking device manager. i have ran diagnostics and nothing .i have no clue how to fix this. please help !!!
 

Relevancy 66.22%

So, been going crazy trying to figure this out
no help online , that i can find
hoping this is in the correct section

Sonicwall TZ 180 router/firewall
LAN and WLAN is configured on different subnets (just the way it is setup) and any devices on either network can not see shares/printers etc.... on the other network through the same device.
from what i can tell, ihave all the necessary port forwards/AccessRules setup for WLAN and LAN to communicate together but, it is just not working properly
does anyone who has this router, know what the exact settings are to ensure the LAN and WLAN devices communicate to each other.

thanks for any assistance you can offer
( i have no hair left )

 

A:LAN and WLAN help ( Sonicwall TZ 180 )

I'll have to test this out on my TZ210/215s I have. I'm not using the wireless capabilities at the moment due to setting up my wireless with a PowerConnect W 620 wireless controller.
 

https://forums.techguy.org/threads/lan-and-wlan-help-sonicwall-tz-180.1053459/
Relevancy 66.22%

Further to this post Abit Max IN9 32X other LAN Abit + WLAN & AirSpace Wi-Fi on x which has been quite helpful until now i need to start a new thread so there is no confusion about my current issue Abit IN9 32X Max LAN & WLAN + other OK so i have the Abit IN9 32X Max LAN & WLAN + other Abit IN X Max i mobo Fresh install of windows My problem lies with both Ethernet LAN and the Abit Aripace wireless card bundled with mobo Upon completion of installation of it is set that you must manually install drivers for the air pace wifi card with the Atheros drivers within windows they work well but there is another problem after sending windows to sleep mode and then waking the pc up the Airpace card Abit IN9 32X Max LAN & WLAN + other is no longer detected it is no longer listed in Device Manager and can not be recovered by means of scanning for hardware changes the device just is not there any more To get the device back and listed again i have to make a system restart I have tried everything i can think of but uninstalling and reinstalling drivers but only with the same resulted i have even unchecked allow this device to put into sleep mode but without success Now while experimenting with the card and drivers i have also noted that there is no Ethernet device quot nothing quot no restart fix the device just does not exist according to window both Ethernet LAN devices are present and enabled in BIOS but windows not not detect such devices This now leads me on to the fact that there are many other devices related to my chip-set that are not being detected I have downloaded the latest nForce drivers direct from nVidia nforce win bit international whql but they are no use since the devices do not exist thus can not be installed If i uninstall the only network device then reboot the device detected it listed as Ethernet however the only driver that will be accepted is the Atheros drives listed in the link above Abit seem no help and have not updated any drivers since so you can see im a bit scuppered Sorry for bumping i know its not to be done but this thread hit page without a reply and id rather see if there is a fix before i shell out on a new Board In the mean time can someone take a peek at this mobo ZOTAC NF I-A-E LGA NVIDIA nForce i SLI ATX Intel Motherboard and let me now by comparing my current specs that every thing checks rite I want to take everything from my current system and place on this new board As far as i can see everything is compatible and should swap over

A:Abit IN9 32X Max LAN & WLAN + other

OK, it seems that the Airpace wifi card was conflicting with the on-board Ethernet..... i removed the wifi card and windows then detected both Ethernet ports and SMbus
Now the only problem i have is with the wifi card, it seems to be detected as an Ethernet card rather than a wifi card which brings the problem with detection on boot and return from sleep mode
As far as i can understand it detects the wifi card as a removable device or something similar as windows makes the "Device Disconnect" then "Device Connect" sounds wich i find odd since it permanat device connected via PCI-e mini port
I can use several Atheros drivers and or a unofficial Abit driver but the device still acts the same way
It is starting to bug and annoy me even though its a trivial problem so i hope someone can help

http://www.sevenforums.com/network-sharing/84651-abit-in9-32x-max-lan-wlan-other.html
Relevancy 66.22%

Hi Guys

So here is the thing. I reinstalled windows 7 (formatted harddrives) on a gamingstation i bought used to get rid of all his crap. Of course this wiped all the drivers which i hadn't taken into account. i found the Realtek driver useful for getting the internet-connection working again, but i am still to find the right driver to get Wifi working again. i am quite noobish at this so i hope you can help, as i have a hard time figuring out which network adapter the PC uses and therefore have a hard time figuring out which driver to use.
 
Mads

A:Help with WLAN Driver

Hi Mads
 
I am Tenis
Whats your Motherboard Model Number?
To identify model number download and install CPU-Z here .
It will tell all  information about hardware.
Snapshot:

 CPU-Z.PNG   28.51KB
  0 downloads
 
Then Search drivers by your motherboard name and model number.
 
 
 
Regards
Tenis

http://www.bleepingcomputer.com/forums/t/550150/help-with-wlan-driver/
Relevancy 66.22%

Hi guys,

Some days ago I took my laptop to repair and this guy fixed it but now I dont have any wireless capability.
When I go to device manager i just see the LAN adapter but not the WLAN adapter.

I tried to install some WLAN drivers from the internet but it doesnt work. I dont know if it is the wireless card the one that is not longer working.

I hope you can give me a hand.

Thanks.
 

A:WLAN issues

You've posted this issue in the NETWORKING forum, so there's no need to also post it in the WINDOWS 7 forum.

I've requested this thread be closed.

--------------------------------------------------------
 

https://forums.techguy.org/threads/wlan-issues.1092705/
Relevancy 66.22%

Greetings,

I have a curious question. I have a LAN connection with my router. I was wondering if I would be able to maintain a connection with my LAN and be able to connect to a different router and Internet through WLAN? Would I be able to balance usage between the two different Internet services through WLAN and LAN?

I was just wondering if this kind of setup was possible.
How would it be set up?

Thanks,
NOD62
 

A:Seperate LAN & WLAN

Not really. Windows will prefer the wired connection over the wireless unless you change the routing table.

The way to use multiple ISP connections is with a dual-WAN router.
 

https://forums.techguy.org/threads/seperate-lan-wlan.911831/
Relevancy 66.22%

Hey guys. Since lately I've been experiencing a problem with my wireless network.
The problem is that suddenly it just stops the connection, and then I can find the network again unless I totally restart the computer. It happens quite often, and it's starting to get on my nerves because I use this laptop at my school.

My WLAN Card is :
Atheros AR5008x..

Could it be that my WLAN card is broken or something?

Thanks in forward,

Best Regards, Fred
 

A:WLAN Problem

The first thing that I would look at is your wireless router. Go to the manufacturer's website and download the latest upgrade to the router's firmware. Install that on the router and see if that fixes your problem.
 

http://www.techspot.com/community/topics/wlan-problem.111415/
Relevancy 66.22%

my wireless adapter is not detected by my system when i plug in a ethernet cable to transfer data from one pc to another. and when i take the ethernet cable out wireless internet is online again.
I have a intel 5100 AGN.

A:Wlan adapter gone

Dont think u can have 2 active connections like that at once. I may be wrong though

http://www.bleepingcomputer.com/forums/t/346095/wlan-adapter-gone/
Relevancy 66.22%

Hi there nbsp I dropped my laptop on my bed and a blue screen came up saying the laptop must restart When it did I couldnt get any wifi connections It said WLAN Replacement? 70 z50 no connections available and didnt give me the option to turn z50 70 WLAN Replacement? on wifi etc nbsp I looked around online and saw suggestion to update driver delete and reinstall driver I done this and when I opened wifi connections it gave me a list of connections When I click it it does a loading symbol z50 70 WLAN Replacement? for a while and then gives an error message I close it and all the networks are gone again and doesnt show anything The driver shows the yellow exclamation symbol next to it nbsp I am pretty sure I damaged my wifi network card and it needs to be replaced as I went through all the trouble shooting steps Is it easy to do that myself or should I get a professional Any online videos tutorials for the z How do I find out which wifi cards work with my laptop and where can I buy them nbsp Currently really deep in college work so time is of the essence nbsp Cheers

A:z50 70 WLAN Replacement?

My current wireless card is Realtek RTL8723BE Wireless Lan 802My hardware specs are Intel Core i7 4510U CPU @ 2.00 GHz 2.60 GHz 8 GB Ram 64 Bit Windows 8.1

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/z50-70-WLAN-Replacement/td-p/3441185
Relevancy 66.22%

I have a MSI X320, and after I recently installed windows 7 ultimate on it, Ive been experiencing some difficulties.

At first everything seems fine - I connect to the network and it works smoothly. But sometimes when I start up, the newtork adapter doesnt find and networks.

I then have to run the troubleshooting guide, which basically resets the network adapter, and then it works fine again.

Its really annoying.
The network adapter is 1T1R Mini Card Wireless Adapter. The dirver version is 3.0.7.0 (11-09-2009).
Thanks in advance!

A:MSI 320 WLAN problem

If this is a laptop, you should update the motherboard drivers, as the card is built into the motherboard.

~Lordbob

http://www.sevenforums.com/hardware-devices/67329-msi-320-wlan-problem.html