Windows Support Forum

Adding Network Card to Desktop?

Q: Adding Network Card to Desktop?

I to Card Network Desktop? Adding ve now got a Verizon MiFi unit and I would like to have my desktop be able to connect wirelessly to it Currently I have to plug it into the desktop via USB but when doing that it no longer will Adding Network Card to Desktop? broadcast a wireless signal since Adding Network Card to Desktop? using it with a USB is for greater security and Adding Network Card to Desktop? therefore my daughter and son can t use the laptop and iPod Now I m guessing that I ll need a particular network card that would be compatible with my computer My computer is a custom built one not a brand name Below are the computer specs from the TSG system info utility Tech Support Guy System Info Utility version OS Version Microsoft Windows XP Professional Service Pack bit Processor AMD Athlon tm X Dual Core Processor x Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce LE Mb Hard Drives C Total - MB Free - MB Motherboard MSI MS- To be filled by O E M Antivirus AntiVir Desktop Updated Yes On-Demand Scanner Enabled Any suggestions Need any other info I have SIW so I can get pretty much any info on the system that anyone needs nbsp

Relevancy 100%
Preferred Solution: Adding Network Card to Desktop?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 65.79%

This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.

Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.

The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.

A:Will adding a 2nd network card improve local network transfer speed

That won't really help the way you are describing the problem, although adding access points will help with streaming to wireless devices.

Although there is a setting in Group Policy that allows you to use two connections at the same time, I don't believe it will help in this situation.

I've done many HD movie streaming tests on my system.

I can stream from my media PC to at least 7 other machines at the same time, 4 wired, 3 wireless, plus my TV, and have no problems at all, no skipping, no freezing, even with the same movie in the same place or with 8 different movies at once, my TV is connected to my media center PC so counts as the 8th one.

This is Gb LAN, and 300Mbps wireless but even the 65Mbps limited laptop has no problem.

I'm not really sure why you are seeing these limitations but it may be the router.

http://www.sevenforums.com/network-sharing/275341-will-adding-2nd-network-card-improve-local-network-transfer-speed.html
Relevancy 63.21%

Good Morning Folks This A Adding Desktop Network? To 98 Home question may be a little general for this site but here goes I have a small wireless home network set up with a wired desktop and a wireless notebook My ISP is Verizon DSL and both units Adding A 98 Desktop To Home Network? are XP Home My router is a D-Link DI- Ghz I have file and printer sharing enabled and have WPA security implemented MY son has just revived an old mhz Dell from the basement to play some old games that won t run on XP It runs SE and he would like to Adding A 98 Desktop To Home Network? add it to the Adding A 98 Desktop To Home Network? home network It appears that some current USB wireless adapters will work with Has anyone attempted this Will I be able to stick with WPA if I add a computer Can file and printer sharing be enabled I ve googled this most of the morning but can t quite find reliable answers I know this is a general question any help is appreciated Thanks Dave nbsp

A:Adding A 98 Desktop To Home Network?

That's kind of asking a lot but it might be worth investigating if wired is not an option. I'd be pretty sure about finding out if there are drivers specifically for Windows 98 and that they are reliable, because nothing will blue-screen Windows faster than unsupported wireless drivers.
 

https://forums.techguy.org/threads/adding-a-98-desktop-to-home-network.662198/
Relevancy 62.78%

Hello!
I need help here!

Windows Xp
2wire router

I'v just bout a usb network adapter for my desktop computer.
I'v installed the usb network adapter to the desktop computer, but when i disconnet the ethernet port from the compter im still unable to access the interent! (even thou i've installed the the wireless G USB NETWORK ADAPTER)

I rcvd the following error msg
"You might not be able to access the internet or some network recources. This problem occurred because the network did not assign a network address to the computer."

Anyhelp is appreciated thank you!
 

A:Adding Desktop Computer Network Via USB Wireless

would you post a ipconfig and look in device manager as follows

start>
control panel>
system>
hardware tab>
device manager button>

network adapters
click on the + sign

post backs whats there

also any ! X or ?

---------------------------------------------------------------------------------
ipconfig /all

TWO Methods to do that - some people have problems with ONE----

ONE ---------------------------------
start
run
cmd
ipconfig /all

rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

TWO -----------------------------------------------

Start, Run, CMD to open a DOS window and type:

IPCONFIG /ALL >C:\RESULT.TXT

Open C:\RESULT.TXT with Notepad and copy/paste the entire results here.
---------------------------------------------------------------------------------
download this software using the LAN connection
lets see if it can detect your wireless adapter and wireless signal
Free software to check signal strength of wireless is netstumbler 0.4.0 available for download from http://www.stumbler.net/

http://www.softpedia.com/get/Network-Tools/Network-Monitoring/NetStumbler.shtml

http://www.netstumbler.com/downloads/

http://www.techspot.com/downloads/303-netstumbler.html
 

https://forums.techguy.org/threads/adding-desktop-computer-network-via-usb-wireless.678883/
Relevancy 62.35%

Hi,

Here's the situation:

Running Windows 2000 Pro, have 2 network card installed. The first network card I have installed is plugged into 2 other computers through a switch and is segmented from the entire network. The reason why I'm installing the second network card is to have Internet and printing purposes. Anyways, I installed the second nic and plugged the network cable into my other switch which is tied into my network. I entered in all my settings IP, Gateway, DNS, but when I try to access the internet can't get on. So to me it looks like it's looking at the default network card which isn't connected to the Internet. So how can I configure it to see the second network card for Internet etc. Any help would greatly appreciated.
 

A:Adding a second network card question

Suspect you are using the same network address on both network cards?

For example can't have one card 192.168.0.1 and the other 192.168.0.2.

10.0.0.1 on one and 192.168.0.1 on the other would be OK.

2 nics may not be what you need?
 

https://forums.techguy.org/threads/adding-a-second-network-card-question.353992/
Relevancy 61.92%

Hello Friends,

I have a win xp system which connects to internal network & Internet.
The problem I have is, for each work i need to change the IP address.

Ex: For internal network the ip should be 192.168.0.1
To connect to internet the ip should be 192.168.1.1

Now I want to be connected to both internal network as well as internet at the same time. So what should I do ?

* I can not add another physical network card.
* I can not change the IP's of any other system or config servers etc... (as it is used by our internal application, doing so will make a mess.)
* I have the admin rights so any software changes to my system can be done.

So i was hoping to add a virtual network card, and configure it to the new IP. So can that be done ? if so how ?

Thanks
MiniEinstein

A:Adding virtual network card and assiging IP

Moving thread to the networking forum for better results.

http://www.techsupportforum.com/forums/f31/adding-virtual-network-card-and-assiging-ip-664159.html
Relevancy 61.49%

hey guys i recently decided it was abt time i linked my vista home premium laptop bit to my desktop XP OS network to add a printer to my wireless home network Ive scanned through forum after forum my to laptop printer network. adding vista desktop - a xp wireless and have tried a few things but i reallly have no idea what im doing The printer is connected via usb to our wireless adding a printer to my wireless network. xp desktop - vista laptop d-link router that is adding a printer to my wireless network. xp desktop - vista laptop printing server capable and when i connect it im not even able to print from my desktop any ideas ive also tried adding the printer from both my dektop and laptop through the wizards quot locally quot as ive read but still have had no luck yet Ive tried searching for it from the laptop on the network but it doesnt find it Ive got a brother HL- so im pretty sure its compatable If any one can provide me with step by step instructions or any help at all it would be greatly appreciated Thanks

http://www.vistax64.com/network-sharing/221335-adding-printer-my-wireless-network-xp-desktop-vista-laptop.html
Relevancy 58.91%

but yet laptops are able to connect to the wireless g router.

has anyone any idea why this may be and how i can get the main computer to connect to the internet?

thanks for any help
 

A:internet not connecting on desktop pc where desktop network pci card was installed...

If you provide some information about the "desktop", like the version/patch level of Windows, the indications in Device Manager for the NIC, etc. we might be able to help.

In addition, open a DOS window and type:

IPCONFIG /ALL >C:\RESULT.TXT

Open C:\RESULT.TXT with Notepad and copy/paste the entire results here.
 

https://forums.techguy.org/threads/internet-not-connecting-on-desktop-pc-where-desktop-network-pci-card-was-installed.390929/
Relevancy 54.18%

Can't believe I am posting this but I don't have time to spend on Newegg looking for the category that I know I just am not seeing.

What my friend needs is a network card (wireless) that can plug into his motherboard for his Dell desktop. Not sure how I am not seeing them on Newegg, but if somebody could point them out, it would be nice. Thanks!
 

A:Looking for a wireless network card-for a desktop

is this it?

http://www.newegg.com/Product/Produ...rd&Submit=ENE&Ntk=all&N=0&minPrice=&maxPrice=
 

https://forums.techguy.org/threads/looking-for-a-wireless-network-card-for-a-desktop.495072/
Relevancy 53.32%

Hey Guys,
Wondering if someone can help. After reinstalling Windows from scratch, I'm trying to install the Belkin Wireless G Plus desktop card. When I boot up the PC, it recognizes the new hardware, so when I try to install the software the Wizard prompts me for the BCMWL5.SYS file but it's nowwhere to be found. When I insert the install CD, it doesn't find it there either. Can someone tell me what I'm doing wrong?
Thanks.
 

A:Solved: Wireless Network card for Desktop

hiya.have you put your belkin install cd in,then go to my computer and double-click the drive it is in and select explore,go to the drivers folder and select the xp driver and install
 

https://forums.techguy.org/threads/solved-wireless-network-card-for-desktop.914832/
Relevancy 52.89%

I happened to come across a Linksys Wireless-G Notebook Adapter recently. I don't have a laptop right now, but I decided to take it. I have a computer built about 4 years ago by someone I don't know very well and unfortunately, after reinstalling windows and I can't find the ethernet driver, making an internet connection impossible.

I was wondering if I would be able to open up this desktop and install the wireless card. Since I know the brand, I would be able to find the drivers and hopefully get the internet working. Thanks!

Also: Strangely, the old computer connects to the internet when running Ubuntu. Somehow, I guess it doesn't need the ethernet drivers. Anyway I could get this working on Windows?
 

A:Solved: Wireless Notebook Network Card on a Desktop?

You would need yet another piece of hardware to use that adapter on a desktop computer. You'd need an adapter that accepted that card and then connected to an available PCI slot on the desktop. It would be cheaper and easier to just buy the right adapter instead.

Since there's nothing wrong with the adapter seeing as it works fine in Ubuntu, You need to do some troubleshooting on the Windows side. I don't see any reason to purchase anything yet.
 

https://forums.techguy.org/threads/solved-wireless-notebook-network-card-on-a-desktop.746999/
Relevancy 52.89%

Hi I recently built a new PC My old PC was a Dell Dimension the specifications of which can be viewed in my profile My old PC was Windows Card Belkin Desktop Network Wireless F5D7000 bit My new PC is Windows bit The new build was mostly new parts except I was hoping to bring over my wireless network card This came with my Dell machine and is a Belkin Wireless Desktop Belkin Wireless Desktop Network Card F5D7000 Network Card F D I've plugged this card into the motherboard and it's being recognised as an attachment but I believe I'm having trouble with the drivers as the computer isn't showing any wireless networks I tried using the Dell network drivers but got an error saying the hardware wasn't correct I assume it checks to see if it's a Dell motherboard which it no longer is I also tried using the Version and drivers available Belkin Wireless Desktop Network Card F5D7000 here Official Belkin Support Site Wireless G Desktop Card F D v v v v v v v v - Driver Only Packages US I also tried to install them in Windows Vista compatability mode Although V and V seem to install or at least the wizard finishes and the files are put on my drive I don't think they are actually functioning as the machine still isn't recognising any wireless networks The network icon has a red cross through it and the troubleshooting just tells me to attach an Ethernet cable Any help with this would be so greatly appreciated Thank you

A:Belkin Wireless Desktop Network Card F5D7000

Hi ... See if the Links below help ....

Belkin Wireless Card F5D7000 vs Windwos 7 64bit Ultimate [Solved] - Wireless - Windows 7
Belkin F5D7000 Drivers not working

http://www.sevenforums.com/drivers/369223-belkin-wireless-desktop-network-card-f5d7000.html
Relevancy 52.46%

Hello,

I have a computer which runs Windows XP and I am looking to enable Remote Desktop Connection on it but I can't find anyway to enable it to work with only one network card. When it ran Windows 2003 there was a Terminal manager but I can't locate that in Windows XP.

So any ideas about this?
 

A:Solved: Set Remote Desktop Connection for a single network card

Figured it out myself.

If anyone stumbles across this the answer is here: http://support.microsoft.com/kb/924927/en-us
 

https://forums.techguy.org/threads/solved-set-remote-desktop-connection-for-a-single-network-card.729756/
Relevancy 52.46%

I have an HP Z600 and one hard wired NIC. There is no wireless adapted connected to it. However, the desktop is in Airplane mode and, if I hover over the airplane, it says "Not connected - Wireless communication is turned off". I am unable to take it out of Airplance mode. Not sure why it thinks it has wireless, but Device Manager shows one network card and it shows it is the Broadcom NetXtreme Gigabit Ethernet. Is there any way to get out of Airplane Mode? When I try to turn if off, it stays in Airplane mode.

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Desktop-with-no-Wireless-Network-Card-stuck-in-Airplane-Mode/td-p/5762093
Relevancy 50.31%

Hi,

I have this PC Chips K7 motherboard, it's got integrated video, but wow does it suck. I'm pretty sure there's a way that I can add my Radeon to the system, but I don't know how. I put it in today, and the screen didn't even start, probobly because of an irq conflict. What's the correct way to do this?
 

A:Adding aftermarket video card to board w/ onboard card

JTM said:

Hi,

I have this PC Chips K7 motherboard, it's got integrated video, but wow does it suck. I'm pretty sure there's a way that I can add my Radeon to the system, but I don't know how. I put it in today, and the screen didn't even start, probobly because of an irq conflict. What's the correct way to do this?Click to expand...

can you give a little more info about the mobo?

doc
 

https://forums.techguy.org/threads/adding-aftermarket-video-card-to-board-w-onboard-card.294469/
Relevancy 49.88%

I have an Actiontec GT701-wg DSL modem running a wireless network. I currently have two laptops with XP sharing the Internet connection. Since the modem has an open Ethernet port in the back, I was wondering if it might be possible to plug in a networkable external hard drive and have it available to both of the laptops wirelessly.

If it is possible, what setting would be required on the laptops to enable them to see the external drive?

Thanks!
 

Relevancy 48.16%

Sorry if this has already been discussed. Couldn't find on a search.

I have a small secured network in my office with a modem/router networking three computers wirelessly. I would like to add another router that would allow clients in the waiting room of my office to have internet access. Could you assist me in a setup or map? I already have a wireless Linksys router available to use as the second router.

Thank You
 

A:Adding Wifi Network to an Already Secured Network

Are those in the waiting room to be allowed into OR forbidden access to your Lan systems?

You already have

Code:
modem---router----your.lan.systems
to Isolate the W.R from your lan, connect

Code:

modem---router----your.lan.systems (assumed 192.168.1.x or 0.x)
|
+---new router (new channel+ssid+no encryption)
set LAN addresses and DHCP for 192.168.10.x

add firewall rule to ALL your existing LAN systems to deny src address range=192.168.10.0 thru 10.255
 

http://www.techspot.com/community/topics/adding-wifi-network-to-an-already-secured-network.118448/
Relevancy 46.87%

I have windows vista with aero, the windows switcher works fine when I am using my regular desktop and the internet. In another words, it switches between my regular desktop and any window that is using the internet. But I can not open a new regular desktop. How can I open a new desktop? Is that possible with vista...?

A:Adding a new desktop

Hello Edd, and welcome to Vista Forums.

It sounds like you may be getting Windows Switcher (aka: Flip 3D) and Switch User (aka: fast user switching) mixed up.

Windows Switcher allows you to flip through your open windows to quickly select one.

Switch User allows you to switch (log on) to a different user account (desktop) on your computer without having to close any programs and files first in the user account that you are currently logged on to, and then be able to switch right back to the first one where you left off.

Hope this helps,
Shawn

http://www.vistax64.com/general-discussion/287780-adding-new-desktop.html
Relevancy 46.87%

Hello. I just wanted to know if i could add one new ssd in my pc case of micro-tower desktop HP Pavilion 500-550nv?Is there any place into my small case to put ssd adapter and SSD on it?My pc and my case is that : http://support.hp.com/ro-en/document/c04606884Thanks in advance. I will be waiting for your answer. 

A:Adding new SSD in my HP Desktop

No need for an adaptor. What I have seen people do, and what you can do is, double-stick tape it to the bottom of the case. An SSD is very light and compact so that is indeed an option.




I don't run HP, I just like helping others!FX6300 / Biostar TA970 / 8GB ADATA DDR3 / MSI HD 7950 / Corsair RM850 / Sandisk U110 250GB SSD and 2x WD Velociraptors 300GB / Antec 1100 V2 / NZXT Respire T40

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Adding-new-SSD-in-my-HP-Desktop/td-p/5695913
Relevancy 46.44%

I want to transfer a jpg picture so it comes up whenever I log on.
Whatever I am doing ain't right
Thanks, gang
"Skysarge
If ya gotta go at my age, go Chairborne. Airborne's a little hard on the old knees"
 

http://forums.majorgeeks.com/index.php?threads/adding-jpg-pic-to-desktop-or-screensaver-or-whatever.311414/
Relevancy 46.44%

I am trying out Xbox Music and a Lumia 920. I am downloading songs from Xbox Music and creating playlists, but it never shows up Windows 8 desktop. When I add songs and playlists on my desktop, they show up on the Lumia 920. Any ideas on what is happening?

A:Music Not Adding to Desktop?

This is probably because it's being hosted in the Xbox Music cloud. You're downloading songs from it on your Windows Phone?

http://www.eightforums.com/general-support/13474-music-not-adding-desktop.html
Relevancy 46.44%

I would like to replace the existing DVD drive (ultra slim tray SuperMulti DVD burner drive) on a pavilion 550-110 desktop PC with a Blu-ray drive.The existing unit is mounted vertically in the case. I have replaced the DVD drive with a Blu-ray player on an HP 500-281 PC, where it was mounted horizontally.Could this same blu-ray player be re-used on the new 550-110?If not, please suggest a particular type (or brand) of Blu-ray player-drive. I usually look first on Amazon.com for this type of product.Any help or guidance would be appreciated.Thanks.

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Help-adding-Blu-Ray-drive-to-desktop-PC/td-p/5723991
Relevancy 46.44%

This is an older computer that someone PC to adding desktop 7840 HP RAM brought me to upgrade the memory for them It adding RAM to HP 7840 desktop PC had sticks of in it originally and they wanted the max which is I got sticks of MB RAM When I removed the original sticks and replaced them with the newer sticks it wouldn t re-start It would bring me to the screen where it wanted me to select if I wanted to start it in last known good configuration etc If I remove stick it will go on into windows and act normal I have tried both sticks separately and they both work I have also tried each of them in the opposite place etc It shows in the BIOS that it will take mb and that there are in each slot I finally tried putting of the origianl sticks in with the other and that works Does anyone have any other suggestions as to how I might get the max in it or will we have to be happy with the way I have it now with of each amt Someone has upgraded it to windows xp home nbsp

A:adding RAM to HP 7840 desktop PC

Just because it will take 512 ram doesn't mean it will take any 2 256 sticks to do it. You need to match the ram by using the pc model number or board model at a site that has a configurator such as www.corsair,crucial or kingston.com.
 

https://forums.techguy.org/threads/adding-ram-to-hp-7840-desktop-pc.706855/
Relevancy 46.44%

is it posible to apply this tuttorial in windows 7 ?
Toolbar for the Desktop - Vista Forums[11]=Appearance%20Personalize

A:Adding second desktop toolbar in seven?

Sorry Nonpasaran, but that won't work in 7.

http://www.sevenforums.com/customization/74449-adding-second-desktop-toolbar-seven.html
Relevancy 46.44%

I am running win 10 and I have lost being able to add a folder to my desktop to hold items I want to save. Like I backup my acc'tng. 2 to 3 times a week and save in a folder but now I can't create these folders. I was able to go to open space on desktop and right click and a list would come up and there was new folder add and I would click and it would at this folder then I could name it now I can't. When I go there now the list I get is View, sort by, refresh, display settings and personalize. Does any know how to add a desktop folder?
Thanks
Ben

A:adding desktop folders

Hi Ben Daniels,

Take a look HERE and see if there's anything that might help.
b1rd

http://www.tenforums.com/general-discussion/37670-adding-desktop-folders.html
Relevancy 46.44%

I am running win 10 and I have lost being able to add a folder to my desktop to hold items I want to save. Like I backup my acc'tng. 2 to 3 times a week and save in a folder but now I can't create these folders. I was able to go to open space on desktop and right click and a list would come up and there was new folder add and I would click and it would at this folder then I could name it now I can't. When I go there now the list I get is View, sort by, refresh, display settings and personalize. Does any know how to add a desktop folder?
Thanks
Ben

A:adding desktop folders

Hi Ben Daniels,

Take a look HERE and see if there's anything that might help.
b1rd

http://www.tenforums.com/performance-maintenance/37670-adding-desktop-folders.html
Relevancy 46.01%

I would like to add a USB 3.0 pci-e card to my system. There are several to choose from but none that I find have a 'header' to bring the USB to a port on my front panel. Those ports are now fed by the USB 2.0 header on my MB. I would sure be nice if I could have a USB 3.0 on the front.

Does anyone know of such a card that will permit to do this.

Thank you.

A:Adding a USB 3.0 Pci Card

I have never seen one like you are looking for either. But you can put the card in and use a front panel USB 3.0 that will fit into a drive bay and use the pass through cables to connect to the rear ports.

http://www.sevenforums.com/hardware-devices/231961-adding-usb-3-0-pci-card.html
Relevancy 46.01%

When I add a new video card, does it in essence power down the old (built in)one? Just wanna know because my old integrated card has deep conflicts with my Os.
 

Relevancy 46.01%

I am adding a new Ext HD and need a new USB 2.0 Pci Card. What would be a good investment in a new card?? I want to pay about $20-30. Can anyone tell of a good card?? ODIE
 

A:Adding new HD need a new usb 2.0 pci card

Odie,

That card would be a rather utilitarian device. I don't recall ever seeing a 'review' of USB PCI cards, anymore than LPT add-in cards, or floppy drives.

So I would say that you would be safe with most any card. Safer with a 'brand name' card.
 

https://forums.techguy.org/threads/adding-new-hd-need-a-new-usb-2-0-pci-card.308597/
Relevancy 46.01%

All my husband's game shortcut icons appear on my screen as well. How does he post them only to his desktop and not to all? Not a serious problem, just a very irritating one.
Thanks
 

A:Adding icons to individual desktop

Unfortunately, I've only seen the option to save on one user's desktop on my Vista laptop, not on my XP computer.

To get rid of them, you can right-click the icon and click 'Delete'. This won't affect your husband's desktop, nor will it uninstall the game.

Hope that eases your frustration.
 

https://forums.techguy.org/threads/adding-icons-to-individual-desktop.756065/
Relevancy 46.01%

i am upgrading a desktop computer and installing a second and possible a third to store video files from my video camera and as backups i presume that adding another hard drive is not that hard is there anything else that i have to buy when i purchase the hard drive.

i think i might need to buy another internal enclosure correct? how about a cable? anything else?

A:adding second hard drive to desktop

Are the drives internal, or external?

http://www.sevenforums.com/hardware-devices/100347-adding-second-hard-drive-desktop.html
Relevancy 46.01%

I have a Dell Inspiron 530 desktop with a Phoenix bios, 1.0.18, which does not seem to support placing a password on the harddrive (wdc wd5000aaks-75a7b0, driver 5.1.2535.0 7/1/2001) during setup. It only seems to have an option for a Supervisor pwd.

Is there any way to add a harddrive password to my desktop?

TIA
 

Relevancy 46.01%

Hi
question as to adding more memory for a OptiPlex 740 desktop
Using Windows XP Pro, processor is 2.71 Ghz
If adding one 2 gig non ECC dimm, task manger says only 1.75 G
if adding a second 2 gig dimm ( 4 gig total) task manger only shows 3.25 gig
adding 2 512 Meg (1gig) (total 5 gig) task manger then only shows 2.75 gig
Looking a BIOS each time shows the correct amount of RAM but why is not all the memory added being shown or used, why showing less memory then installed and reporting even less when I went to 5 gig total ?
Also I'd like to up the CPU processor speed as I do lots of Excel spreadsheets with large amount of data is very slow processing with OEM CPU
Can this be done, if so what type of socket can be used, would the BIOS support it and what processor, wattage and max speed would be allowed ?

Thanks

A:Adding memory OptiPlex 740 desktop

Hi Team-zr1
Thanks for writing to us.
32 bit Windows XP has two well-known memory limits. Each process is limited to 2GB of memory. . The maximum memory that Windows XP will use in total is 3.25GB. (as per microsoft).
Do provide us your system tag#, email address and name via private message,by clicking on my name in blue and then select send a private message, as per that we can let you what processor upgrade options available.
Regards

http://en.community.dell.com/support-forums/desktop/f/3514/t/19986203
Relevancy 46.01%

I have a desktop that is in a remote location that can ping back and forth between the domain controller at the main headquarters, but not by name.  I have added the DC to the hosts file of the remote PC and added the suffix of the domain to the list
of dns suffixes' to check, and added a DNS record on the DC for the remote PC.  They are on different subnets.  192.168.0.0 and 192.168.3.0
The thing I am trying to do is add the remote PC to the domain.  When I try to join it says it cannot find a domain controller.

The DC is windows server 2012, the desktop is Win 7

https://social.technet.microsoft.com/Forums/en-US/40c67102-56f2-49d8-b41a-80f7c85dd93f/adding-a-remote-desktop-to-a-domain?forum=w7itpronetworking
Relevancy 46.01%

The only way I've found to add app icons to the desktop is to go to the All Apps screen, right click, go to file location, then add a shortcut to the desktop from there. Is there an easier way?

Thanks

A:Adding desktop icons for applications

Hello Vincenzo,

You could right click on the desktop, click on New -> Shortcut, browse to and select the .exe file of the program, type in a name for the shortcut, and click on Finish.

http://www.eightforums.com/general-support/12934-adding-desktop-icons-applications.html
Relevancy 46.01%

I have a need for an RS232 port probably PCI, but I see such a wide diversity of prices. Which should I choose? Some have a UART and some do not. Do I need a UART? Thanks, Jim

P.S. I'll be using it with ham radio software called Ham Radio Deluxe (HRD) and a ham radio transceiver Yaesu FT-950

A:Adding an RS232 PCI port to my desktop

Check to see if you have a PCI slot. Some newer PC's only have PCIe slots and if they have a PCI slot it is a "bridged" slot to the PCIe bus and many PCI devices will not work or work properly on a bridged PCI slot.

I would check and see what others with that software are using.

(ex W5DVO/ZD8JES).

http://www.eightforums.com/drivers-hardware/62998-adding-rs232-pci-port-my-desktop.html
Relevancy 46.01%

Hi, I want to add a shortcut for my Malwarbytes anti-malware application.  I found the folder using the start menu and right clicked on it, used 'send to desktop'.  the folder appeared on my desktop.  But the shortcut points me all the files in the folder.  I just wanted the scan program on my desktop and I do not know which file is the scan program.  Does anyone know?

A:adding a shortcut to desktop on windows 8

You did it correct except for one thing.Don't send the folder to the desktop,open it up and send only the executible.

http://www.bleepingcomputer.com/forums/t/560678/adding-a-shortcut-to-desktop-on-windows-8/
Relevancy 46.01%

I thought this would be so easy-- my aunt asked if she could have my speakers from my old computer when I got my new one. But when I plugged them into her speaker jack, the volume is so low, it's hard for a person with GOOD hearing to hear anything. I opened the control panel to access the audio controls and have them all at max and that's the best I can do. If there's not a simple fix here, she'll just have to be content with what she has because my knowledge of computers is rudimentary at best. I was hoping there might be some suggestions to help us out. Thanks!
 

Relevancy 46.01%

I have a very small Asus desktop PC that only uses about 30 watts of electricity. It's supply voltage is 24VDC which it receives from a 24VDC power supply on the piece of equipment it is installed in. I want to add a battery to it so that when this machine is shutdown and power is removed abruptly from the PC it can shutdown gently. I am having no luck finding an off the shelf UPS so I was hoping to add a battery pack (LIKE THIS: http://www.bixmart.com/BiXPower-BP160--19V-12V-Rechargeable-Battery-Power-Bank-Pack_p_109.html) and trick the PC into thinking its a laptop. Does anyone know how this might be accomplished?
 

https://forums.techguy.org/threads/adding-a-battery-to-a-mini-desktop-pc.1105518/
Relevancy 45.58%

I set up a small network here at my house. I have my computer and a laptop both sharing files and my computer sharing the printer. Both use Win XP. now i have an older computer in another room that is running Windows ME. How do i set that one up to be on the same network? I don't know ME all that well. Do i need to create a network disc? I know it asked me if i wanted to create one when I created this network but i didn't do it. Is there a way to go back and create one now? Thanks in advance.
 

A:Help adding a PC to a network.....

Yes, you can go back and run the Network Setup Wizard again.

But, easier if you have the XP system disk--just stick the Windows XP system disk in your ME's CD drive. When it comes up you choose (I'm not sure of the exact words) "do other tasks." One of the other tasks will be the Network Setup Wizard.

[Just make sure you don't go down some path that formats the disk or installs Windows!]
 

https://forums.techguy.org/threads/help-adding-a-pc-to-a-network.451095/
Relevancy 45.58%

I have a home PC network set up with a few desktops and laptops, some wired, some wireless, all running XP professional. I recently bought a Mac G3 desktop and upgraded the operating system to OSX 10.2 I want to become familiar with mac's and their software in addition to windows. I am attempting to add the mac to my pc network and could use some help. I found the network settings on the mac but so far don't seem to be able to add that system to my existing network. I am pretty sure that it can be added but if anyone could save me some time I would appreciate it. Thanks, Vince
 

A:Adding a Mac to a PC network

Well, you can start by telling us if it's wired or wireless. The Mac out of the box should connect to a router with a wired connection.
 

https://forums.techguy.org/threads/adding-a-mac-to-a-pc-network.731281/
Relevancy 45.58%

Okay, so I just got a new computer, this one:

http://www.walmart.com/catalog/product.do?product_id=7810486

I'd like to upgrade by adding the max amount of memory and a new video card - probably this one, http://www.tigerdirect.com/applicat...812&SRCCODE=PRICEGRABBER&CMP=OTC-PRICEGRABBER

Thing is, I'm not sure if the power supply can take it - I'm kind of a newb to this stuff. Is there any way you guys could tell me what my power supply is and if I'll need another one?

Thanks in advance.. I really appreciate any help.
 

Relevancy 45.58%

How can I tell if my pc is compatible with adding aGeForce GTX 950 I already installed a 500 Watt power supply.










Solved!
View Solution.

A:Adding a new gtx card into the machine Help

I looked up your motherboard. Unless you've replaced the mobo (and I'm assuming you have not if you're posting here) you have a IPISB-CU (Carmel2) motherboard in that machine. The unfortunate news is that you will not be able to use a GTX 950 with this motherboard. The reason? This bios on this motherboard is legacy and the newer graphics cards require UEFI. There is no update or fix for this from HP. Your option is to either find a graphics card that will run with a legacy bios or replace the motherboard. I just came across this problem myself. I have an h8-1114 with the same motherboard. I purchased a GTX 960 FTW assuming that HP was providing updates for their hardware (bios). After hours on the phone with Nvidia we finally figured out it was the bios. And a call to Evga quickly confirmed it was the bios and there is no fix for it and HP isn't providing an update the problem. Personally I'm working on a limited budget but the original video card that came with this machine isn't an option for me (it's been log ago given to my daughter for her machine to play Minecraft). I'm using an old GTX 260 we had laying around and can't play some of the games I enjoy because of it. I will be replacing the mobo and will NEVER EVER again buy a pre-built computer.  HP has completely disgusted me with this machine. This is not the first issue I've had that would not have existed if I had built the machine myself. Here's the mobo I've picked to replace HP's peice of garbage that should be compatable with all the other hardware you have (your RAM, CPU, etc.).  http://www.amazon.com/dp/B008NA1K0S/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=MPPXIPPUEMIQ&coliid=I1YAAN0FVVCEWP

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Adding-a-new-gtx-card-into-the-machine-Help/td-p/5591931
Relevancy 45.58%

hey guys I card AGP after hangs PC adding got PC hangs after adding AGP card the weirdest problem I have ever encountered After I connect an AGP card The PC just hangs in windows but sometimes it doesn t boot all the way and hangs when I am still getting a black screen at boot then the PC giving PC hangs after adding AGP card me an Alarm sound And btw I got the latest BIOS upgrade Any ideas Here are the specs Processor Model Intel R Pentium R CPU GHz Speed GHz Cores per Processor Unit s Threads per Core Unit s Internal Data Cache kB Synchronous Write-Thru -way set byte line size threads sharing L On-board Cache MB ECC Synchronous ATC -way set byte line size lines per sector threads sharing Mainboard Bus es ISA PCI IMB USB i c SMBus MP Support Processor s MP APIC Yes System BIOS Phoenix Technologies LTD PG Mainboard I G Total Memory MB DDR-SDRAM Chipset Model Intel Corporation G PE P P DRAM Controller Host-Hub Interface Front Side PC hangs after adding AGP card Bus Speed x MHz MHz data rate Total Memory GB DDR-SDRAM Shared Memory MB Memory Bus Speed x MHz MHz data rate Video System Monitor Panel Default Monitor Adapter Intel R G Graphics Controller Physical Storage Devices Hard Disk IC L AVVN - GB Hard Disk WDC WD JB- REA GB CD-ROM DVD BENQ DVD DD DW CD X Rd X Wr DVD X Rd X Wr CD-ROM DVD LITE-ON CD-ROM LTN- S CD X Rd Peripherals Serial Parallel Port s COM LPT USB Controller Hub Intel R EB USB Universal Host Controller - D MultiMedia Device s Device MPU- Compatible MIDI Device Device Standard Game Port Device C-Media AC Audio Device Power Management Mains AC Line Status On-Line Operating System s Windows System Microsoft Windows XP Professional Service Pack Platform Compliance Win x Network Services Adapter Realtek RTL Family PCI Fast Ethernet NIC I d appreciate it if anyone could suggest an Idea nbsp

Relevancy 45.58%

I need to add a second sound card to my desktop pc. Do the new usb sound card adapters really work ? I understand the adapter is connected to a usb port and the sound card connects to the adapter - thereby side stepping the issue of going into the pc and adding a sound card internaly. Am I understanding this correctly ? Thanks inadvance !
 

Relevancy 45.58%

Hi I was going to add a graphics to my computer. I have a 64mb integrated graphics card now. I only need the extra graphics card because it will have and s-video out. Anyways the graphics memory i will probably buy is also 64mbs, so my question is after that is installed will both my integrated and the new graphics work togeather? Will I then have 128mbs of video memory or will it only be one or the other?
 

A:adding graphics card

it will be one or the other. http://www.newegg.com/Product/Product.aspx?Item=N82E16814150040 is a cheap ~$50 card that has 128mb memory and s-video out. I'd recommend it if you aren't trying to play any new games. Are you using a pci port?
 

http://www.techspot.com/community/topics/adding-graphics-card.72666/
Relevancy 45.58%

after installing pci card reboot computer freezes, have to unistall pci card fro computer to go back to normal dell precision 340 win xp sp3 service tag -2CC4L11
pci card came with disc installed before installing pci
 

A:adding pci usb card problem

try a different pci slot........... install the pci card 1st ........then bootup wnen windows asks for driver point it to the cd/dvd drive (with disk inside)
 

https://forums.techguy.org/threads/adding-pci-usb-card-problem.1083462/
Relevancy 45.58%

ok here a my problem i add a USB 2.0 and FIREWIRE PCI COMBO CARD (NEC® + ALI® chipset 6-port USB 1.1/2.0 & Firewire IEEE-1394 Combo PCI Card Kit)

but i still running out of usb port- i have a usb hub- with my printer connected to it, but ti tell me my printer would be faster if connoted to a usb 2.0
i do but the 2 plug usb hub im use, may not be be usb2.0 useable

on my mobo i have 2 usb 1.0 plug and 2 other usb plug hook up to MOBO use a cable and one of the back plate a pcl card ) that one i will soon get rid of)

my question is i like to add a other pcl usb 2.0 card to my compter, i really do not see any problem in do so, but it never hurt to ask first- a card that has more plug on it-- like maybe 4 lol
 

A:adding a other pcl usb 2.0 card to compter

You can stick as many USB 2.0 cards as you have PCI slots for into the system. I prefer the cards with the NEC USB 2.0 chipset, they are more compatible for me. I've had a number of issues with the ALI and VIA chipset USB 2.0 cards.
 

https://forums.techguy.org/threads/adding-a-other-pcl-usb-2-0-card-to-compter.530316/
Relevancy 45.58%

Hi All,
I have an older Premio 200F computer, think thats what model it is not sure.

Only had 64mb of memory,2-32mb cards . I purchased a new 128mb card. These are all DIMM cards.

When I installed the 3 cards the Performance only showed 96mb.
I moved the cards around to all the sockets and still 96mb.

Now I have one 128mb card and one 32mb card= 160mb of memory.

Looking at documentation of the premio computer I should be able to have
256mb of memory.
There are a total of 5 sockets, 3 DIMM, and 2SIMM
Anybody have any ideas that would help me with this problem??

Windows 98se
 

A:adding a new 128 memory card

256MB total divided by 3 slots equals 85.3MB per slot, but they don't make 85.3MB modules so there's an error somewhere.

Does the 128MB chip work with each 32MB stick and show the right amount? If you put in both each stick by itself does it show the correct size for each one?

You may also want to exchange the new stick for a different one. Make sure its a close match to the existing RAM, ie. PC66 or PC100, Chips on one side vs chips on both sides of the stick.

You should also run a Memory testor once you get a combination that works: http://oca.microsoft.com/en/windiag.asp
 

https://forums.techguy.org/threads/adding-a-new-128-memory-card.272468/
Relevancy 45.58%

I recently fitted a USB 2.0 card into my PC which is 6/7 years old now and it only came supplied with 2 - USB 1.1. Everything works fine and much quicker via the new ports. But I need more USB ports for new hardware.
Is there anything to stop me adding another expansion card with USB 2.0 ports instead of using a USB hub?
Many thanks
 

A:Adding Extra USB 2.0 Card

Don't see what, unless your out of pci space. Exchange the two port for the 4 ports out there. Jazz
 

https://forums.techguy.org/threads/adding-extra-usb-2-0-card.687152/
Relevancy 45.58%

MY computer specs are:
perating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.150202-1526)
Language: English (Regional Setting: English)
System Manufacturer: Gateway
System Model: DX4860
BIOS: BIOS Date: 10/31/11 10:13:44 Ver: 04.06.04
Processor: Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz (4 CPUs), ~3.0GHz
Memory: 8192MB RAM
Available OS Memory: 8096MB RAM
Page File: 4709MB used, 11480MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 64bit Unicode

I am vondering can i add a video card to my system? I want to play game star citizen with it if its possible. Games requirments are:
Minimum System Requirements
Windows Vista (64 bit), Windows 7 (64 bit) – Service Pack 1, Windows 8 (64 bit)
DirectX 11 graphics card with 1GB Video RAM
Quad core CPU
8GB Memory

Any help would be apriciated ty.
 

Relevancy 45.58%

How can I add a sound card to a computer that has on board sound card?

A:adding a sound card

Go into the device manager and disable your current sound card, and then install the new one. Your computer should automatically see the new one and you should be able to use it right away. If you have problems with not hearing anything after installing the new one, go into the control panel to the sounds and devices settings/audio tab and be sure that your default device (new device) is the one listed.

http://www.bleepingcomputer.com/forums/t/9861/adding-a-sound-card/
Relevancy 45.58%

I need help installing a graphics card on a ASUS M3N78-EM motherboard, which has an onboard video card. The graphics card I wanna install is an NVIDIA 9800 GTX.

What fo I need 2 do??
 

Relevancy 45.58%

I'm thinking of adding a video card to my 1 year old HP desktop. Is there a site or way to figure out if a card would give me a decent improvement? My HP is an AMD A8 6500 (3.5 GHz) with INTEGRATED Radeon HD 8570D graphics card, which seems pretty fast as it is, but I'd like to add a budget or midrange card ($50-$150). I don't need top end performance, just a decent improvement. Would a budget card even improve the performance at all? Also, if I add a card, do I have to reassign the memory that was used for the integrated card to the processor, or does that happen automatically? TIA
 

Relevancy 45.15%

Is there a way to change the desktop background in Win 7 without switching sounds back on and my screen saver off? This is really annoying when all I want to do is change the background. I don't want to go through the same rigmarole each time of switching sounds off again and the screen saver back on every time I decide I fancy a different picture.

Anyone got any ideas?
 

https://forums.techguy.org/threads/changing-desktop-background-in-win-7-without-adding-sounds.1008653/
Relevancy 45.15%

Hello.

Months ago I downloaded Just Cause 2 from Steam, but I had a few problems playing the game in full screen. I was searching for a solution on YouTube and I found a person who told basically told the viewers to add a new display and use that in order to get the full screen working when playing Just Cause 2. So I did that, it worked perfectly fine, but after I changed back to my regular display I noticed that the icons rearranged themselves for some reason. They rearrange every time I wake the PC up, turn it off/on and when I restart it. This has been bothering me for quite a while and now I believe it's time to fix it. If you look below you'll find a link to the YouTube video, so you can see what I actually did. You can stop watching at 0:40 as the Steam part doesn't matter.



Thanks for reading.

Kind regards,
Darundo.

A:Desktop icons keep switching after adding a new display

There is no video link.

http://www.eightforums.com/general-support/65732-desktop-icons-keep-switching-after-adding-new-display.html
Relevancy 45.15%

My company purchased three HP ProDesk 600 G1 SFF desktop computers recently, upgrading from three Optiplex 380s. The office uses an older, networked dot matrix printer. Some of the software that prints to this printer requires a Parallel Port driver assigned to LPT1, and the ProDesk 600 G1 does not come with a Parallel Port built-in (it has a spot on the motherboard where one can be added, judging from the motherboard layouts I have found online for this product). I need to purchase expansion cards that will work with Windows 7 Pro 64-bit and can be added to the hardware on this desktop computer. I just need to know which Parallel Port card to buy. I find the HP support site rather complicated and could not find a place where I could investigate what parallel port expansion cards would work with this desktop. All help is appreciated.potterjazz

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Adding-Parallel-Port-to-ProDesk-600-G1-SFF-Desktop/td-p/5790687
Relevancy 45.15%

bought bluetooth usb micro adapter, (Nexxtech), successfully downloaded installation cd, computer recognizes usb dongle but there is no bluetooth icon and I cannot add any devices. I am trying to use my computer to link music to my new bose portable speaker.

Previously downloaded fsquirk but cannot figure out how to remove it and wonder if that has any bearing?

A:trouble adding bluetooth to Gateway desktop

Hello and welcome Carol now download Revo Uninstaller to get rid of the fsquirk?? never heard of it to be honest and usually one has to "pair" the device to the machine with Blu tooth.

Now from a Google there are no drivers for that dongle and it should be recognized in Devices and Printers see my pic of my mouse there mind you my laptop has an internal Blu tooth so I cannot say for sure if the dongle will be there. Also if you see my other pic go to there and see what is listed you can access that through Control Panel or there should be a small pointer lower right on the taskbar that you can click to "Customise" and just look through the listing to see if it is there.

http://www.sevenforums.com/hardware-devices/359980-trouble-adding-bluetooth-gateway-desktop.html
Relevancy 45.15%

When I add a folder full of background images under the "picture location" of personalization of desktop backgrounds. Why are the sub folders not included?

A:Include sub-folders when adding desktop backgrounds

Hi BionicGear83,

That's just the way Windows 7 does it I'm afraid :/ however, here is a great tutorial for how to create a customized backgrounds library, browseable in the same Personalization window, that may end up being even more useful than what you had originally intended: Neowin.net - How to: Create custom wallpaper collections in Windows 7

I'm sorry it's not exactly what you wanted, but please let me know if it helps at all...

Cheers,

Walker
Windows Outreach Team

http://www.sevenforums.com/customization/66159-include-sub-folders-when-adding-desktop-backgrounds.html
Relevancy 45.15%

Hi Im currently trying to add a second workstation to a network pretty simple stuff or so i thought All three machines to second adding network xp Trouble W/S are running on xp-pro The server and the first slave get along fine I can access the server from the third slave via start-run and ip address but get no network path found when i try unc path I know ive missed something fundamental but cant figure out what Trouble adding second W/S to xp network it is All user accounts have been set up correctly I p address default gateway and subnet are all fine Ive enabled netbios Normally they d be speaking by now the only thing i can think i may have missed is DNS addresses as i forgot to check Trouble adding second W/S to xp network but i reckon theyre o k Would adding the i p and computer name to lmhosts have any effect or has anyone got any ideas on what else i can try all hardware is fine and they all ping eachother I just cant resolve the unc names If anybody can point out what ive missed i d be gratefull cheers nbsp

Relevancy 45.15%

I have an XP machine that I reformatted and reloaded Windows on, now I'm trying to add network connection back (we're on a LAN). I can't seem to get it to recognize network. Also the "add user" screen looks different than before.

Thanks.

Dana

A:Re-adding computer to network

Hello and Welcome to TSF,

Did you install the drivers for the pc?
Did you add protection?
Did you update the windows?

http://www.techsupportforum.com/forums/f10/re-adding-computer-to-network-380474.html
Relevancy 45.15%

Hello:

I have a question... i was browsing through group policy and noticed that there is an option to define a website where users can click to add network printers... i was wondering how to setup that page so when they click on the pritner name it adds it to their computer?

Any help would be great!
 

A:Adding Network Printers

Never noticed that group policy. Where is it located?
 

https://forums.techguy.org/threads/adding-network-printers.214523/
Relevancy 45.15%

I have a home network that is up and running. It consists of a cable modem, a non-wireless router and two computers.

My cable provider provides me with two DHCP IP addresses that are pingable on the Internet.

I would like to connect a second router to my network and give it the second DHCP IP address that my Internet providers gives me.

How would I do that?

Thank you
 

Relevancy 45.15%

hello i have added a second router to my network in a second building at my location my dsl comes in and into my first router which is the dhcp second router on network adding server for the network in both adding second router on network buildings the ip address of the first router is and works fine with all computers online i added a second router to help the network and have made the ip address of the second router and all computers in the second building behind the second router are online and working fine my problem is on one of my computers in the first building has my quickbooks file and all the computers on the second adding second router on network router cannot see the computer that has the files in the network neighborhood before adding the second router all computers in both buildings were visible and shared and all had access to all computers how adding second router on network can i get the computers in the second building behind the second router map to the computers on the first router DSL - Router - computers online ------ second router - computers online XXX computers cannot see XXX computers want to map a network drive to group thanks robert nbsp

Relevancy 45.15%

I need to make a new network, but I have to implement it into the other network. One is a physical bus (10base2) and the other is wired as a logical token ring. I am going to make my new network a physical star. I will not be using any wireless so this seems most logical to me. Do you think I could get away with using the hybrid topology for my logical, or should I use a ring or bus?
 

Relevancy 45.15%

Win XP sP2 with home network (Linksys)
HD crash I replaced it and reloaded all Programs
Existing home nework wireless has my Laptops connected & working like usual
trying to add old PC which is directly contected via RJ45 to the router
not sure how to add it back on to existing network
PC does have internet connexion
Norton 2007 firewall in place

Any ideas, suggested website or directions would be appreciated
 

Relevancy 45.15%

I have a Canon MF3110, I have it connected to a computer running Win 7RC at the moment, I am running Win 7 Pro Full install on my main computer. I can access and print to the Canon from all 4 computers on my simple home network. How ever I can not access the Scanner from my main computer. I try to scan and I get "No Scanner Connected" popup. Any Ideas how to get the scanner to be recognized as it is part of the printer I think it should work.
 

Relevancy 45.15%

Here is my network config.

PC A <wired> wireless 2wire gateway
Xbox 360 <wireless> wireless 2wire gateway

need to add

PC B <wireless> wireless 2wire gateway

Both PCs are running Win XP. Have gone through network wizard to add PC, both have same network, "Home" and same WEP.

I see 2wire gateway in the list of wireless connections on PC B but when I click on it to connect to that network I get an error message...
Code:
Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of availiable networks, and try to connect again
Am I missing setting a configuration?
 

Relevancy 45.15%

Hi I m new to networking but just set up a home network with a wireless D-Link DI- a friend gave me I have a wired desktop and a wireless laptop set up now My internet connection is DSL and both are Network Help Printer Adding running XP I ve configured the router and set up WPA security and everything seems fine Both can access the web no problem I have an older HP deskjet wired to the desktop that I d like the laptop to print on Everyone says just click on quot sharing quot on the printer Help Adding Network Printer properties from the desktop and then just add the printer from the laptop Problem is I can t find the printer anywhere from the laptop I click on quot add network printer or printer hooked up to another computer quot and it s not there I tried quot local printer quot and nothing I try to browse for it and nothing Is there anything else I need to do to get the network to recognize this printer Sorry for this very amateur question Thanks Dave nbsp

A:Help Adding Network Printer

Check for firewalls i.e. Windows, Norton, or McAfee. These have most likely been the culprit for me in the past.
 

https://forums.techguy.org/threads/help-adding-network-printer.565920/
Relevancy 45.15%

Okay, we've got five printers in the office here, and they're all networked and every time I add a computer to the network because of a new hire, I just manually add all of the printers for them.

We just got a new printer and added it to the network.

Question: Is there a way to add this new printer to every computer in the network at once, or do I need to manually go to each computer and add that printer? Your help is greatly appreciated, as always.
 

A:Adding a printer to the Network

sorry, to my understanding, the client must add the network printer him/herself.
 

http://www.techspot.com/community/topics/adding-a-printer-to-the-network.73622/
Relevancy 45.15%

I have a very simple network problem that is bugging me. I have an XP home computer that has a Westell modem/router with Verizon DSL and it works fine. We are using it wired. My daughter came home from college, she has a Dell Dimension 4600 with a mini wan port. I plug the ethernet cable into the computer and I can't figure out how to get it to recognize the network. Occasionally, it will work for about 10 seconds and quit. I am not familiar with XP Pro at all, it looks different than XP Home. Please help me. I have tried everything I could think of and then some. My computer has XP SP3 on it if that has anything to do with it.
 

Relevancy 45.15%

this is probably a pretty dumb question, but my mind is a blank ...

I am running several computers plus assorted printers and an NAS box (LaCie 1TB drive) on a home LAN. All computers are running WinXP SP2. When I added the NAS box and a sharepoint, I added a single user (me). When I tried to access the NAS box from different computers, everything seemed to work fine. But what I neglected to test was accessing the NAS box using an account on any of the computers that was different (acct name and password) from the account that set up the share in the first place. So, I recently tried to access the NAS box from another account and could not. I had to log into the share using the original account name and password.

So, how do I add additional users? I can not seem to find a hook into the share attributes to add users.
 

A:Adding Network User

What's the model number of the NAS?

Chances are you add users in the NAS's webpage.
 

https://forums.techguy.org/threads/adding-network-user.754600/
Relevancy 45.15%

I can put my w/s on other peoples computers on the network, but as I update my worksheet, the updates do not come up. I am trying to show the most current version of my worksheet on their computers, without them being able to change it. I am not as concerned about them trying to change anything, as I am with them being able to access the most current w/s. I am not really proficient in this, so please keep answers VERY simple. Thanking you in advance.
 

https://forums.techguy.org/threads/adding-excel-w-s-to-network.510106/
Relevancy 45.15%

When i add a network printer on Windows XP Professional it only adds to the current user and i want it to add for all users. The only way i've figured out how to fix this problem is to use my login script (kix) to add the printer but my script is getting full of all the different printer for every machine. Is the anyway to add printer for all users on Windows XP?

A:Adding Network Printers

for network printer just put some IP ADRES in printer setup...

go to some other machine and search the computer name and after that you can c the printer and double click for that...

http://www.techsupportforum.com/forums/f10/adding-network-printers-100193.html
Relevancy 45.15%

Hi, I currently have a home network with a Dell Demension 2400 desktop computer as the main computer and a Dell Inspiron E1705 laptop. Both of them have Window XP. I would like to connect two new Dell Inspiron laptop running Windows 7 to the network. Is this possible to do with different versions of Windows?
 

Relevancy 45.15%

I am adding a new NT server to an NT 4.0 network. When you sign on it won't take my administrator password. How can I go in and change it so it will take my administrator password so I can sign on to the Domain.
 

A:Adding NT server to NT network

Is this setup as a member server?

Try the local password you assigned it when you installed NT. This is normal behavior for member servers.
 

https://forums.techguy.org/threads/adding-nt-server-to-nt-network.67977/
Relevancy 45.15%

I have an existing network with my business using Windows 2000 Server. I want to connect a new computer to the network. Not sure how to create it
 

Relevancy 45.15%

We have 3 computers. All running win2K. Would like to put them all on a network, preferably wireless if possible. How hard is this going to be and what do we need to know to install the network? What are some reputable brands for equipment? Thanks
 

Relevancy 45.15%

I have an existing network, all Dell with Netgear router working fine, file sharing printer sharing etc great. New (Dell) laptop on Vista cannot see other computers, their files or the printer which is connected to one of the XP systems. Vista machine shows as connected to the router and I have internet on the Vista machine. All PC's are on the same workgroup. Dell says it's not a Vista problem (haha) and I know enough to know I need help with this. BTW, it's my wife's new laptop so if you're married you understand how anxious I am to fix this.
 

A:Adding Vista PC to network with XP's

jtwilburt said:

I have an existing network, all Dell with Netgear router working fine, file sharing printer sharing etc great. New (Dell) laptop on Vista cannot see other computers, their files or the printer which is connected to one of the XP systems. Vista machine shows as connected to the router and I have internet on the Vista machine. All PC's are on the same workgroup. Dell says it's not a Vista problem (haha) and I know enough to know I need help with this. BTW, it's my wife's new laptop so if you're married you understand how anxious I am to fix this.Click to expand...

Did you try waiting a while , then rebooting, to see if the laptop could 'see' the other computers? Sometimes it can take a while before the router finally 'wakes up' and realizes there's another computer out there.

As for the printer, did you install the drivers included in Vista on the new laptop (don't use the disc that came with the printer unless it's a newer one that is Vista compatible). Just went through this with my new computer over the weekend.
 

https://forums.techguy.org/threads/adding-vista-pc-to-network-with-xps.615742/
Relevancy 45.15%

Is there built in wireless functionality or what can I do to connect this wirelessly?
 

https://forums.techguy.org/threads/adding-a-ps3-to-my-wireless-pc-network.633195/
Relevancy 45.15%

Hi All,

Tried the following scenario but facing some issues:

1) Install Windows 2000 server/ Windows 2003 server.
2) Go to Network Connection and assign IP addres to the system.
3) Now after assigning one IP address, click on "Advanced" button in the Internet Protocal(TCP/IP) Properties window and add one or two Ip address to the same NIC.
4) Now save the configuration, and check for the ip address of the system, it will show three ip address for the same system(same NIC).
5) I have IIS and few applications insatlled.
6) WHen i try to access the applications using the IP address only one IP resposnds the other two gives me "page not displayed".

Tried avrious things but nothing worked out.Could anyone give me a solution
 

A:Adding Multiple IP Address to the Same NIC CARd

Can you ping it by ip? If not, I would check the firewall first.
 

https://forums.techguy.org/threads/adding-multiple-ip-address-to-the-same-nic-card.385158/
Relevancy 45.15%

Can I and would it be that much faster to install a USB 3 card?

I'm running a Dell 580 with Win7 Home Premium, 64Bit with 8GB of Ram with a Intel I5 CPU 650 at 3.20 GHz.

A:Will adding a USB 3 card make much of a difference.

I dont think so,
Maybe some other user can throw more light on its impact

http://www.sevenforums.com/performance-maintenance/203853-will-adding-usb-3-card-make-much-difference.html
Relevancy 45.15%

Ok I'm new here so sorry if I'm writing in the wrong place!
To the question at hand.
I own a PC with a AsRock 4Core1333-eSATA2 motherboard, and a power supply of 450 W.
So my question is would it be abble to run the Gigabyte ATI HD 6570 OC 1GB video card.
I'm looking to upgrade my pc with out spending too much money. And I'm thinking of adding 2 plates Kingston DIMM DDR2 1 GB 800 MHz to the 2 that I already have.
I don't really have an idea of what I'm doing so I need some help.

Thank you!
 

A:Choosing a video card and adding RAM

I believe the 6500 series cards require at least a 500 Watt power supply so you will most likely require a power supply upgrade as well if you choose that card.
 

http://www.techspot.com/community/topics/choosing-a-video-card-and-adding-ram.183536/
Relevancy 45.15%

Hello,I am thinking about getting a seccond graphics card for my pc and was wondering if it is possible?I currently have a AMD R9 270 radeon and was thinking about adding a seccond one and running it with crossfire, but that is only if its possible.Thanks

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Adding-a-second-graphics-card-to-HP-envy/td-p/5646716
Relevancy 45.15%

I need to run dual monitors on this computer. I purchased an EVGA GEFORCE GT 610 video card with dual DVI outputs. The card specifications say the PC power supply needs to be 300 watts, and have 16 amps of +12 V available, which the power supply in the Envy 700-216 meets. Plugging the card in results in no booting, no video out of either the card or the on-board video, and 8 beeps. Don't know if the card is just not compatible, or the card is defective, or the PC has a problem. Is there anything I can check to narrow down the problem? Thanks, audioconsultant  










Solved!
View Solution.

A:Adding video card to HP Envy 700-216

Hi: When you install a non-HP video card on any HP PC that came with Windows 8 or newer from the factory, you need to change two BIOS settings before adding your new video card. Please see this link for what settings to change...you will need to remove the video card if you have not done so already to change the settings. http://support.hp.com/us-en/document/c03653200/  

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Adding-video-card-to-HP-Envy-700-216/td-p/5570948
Relevancy 45.15%

Hi This is my first Video Work Won't Adding Card - post on this Adding Video Card - Won't Work forum and I hope someone can help me out I m trying to add a ATI Rage Pro Turbo PCI video card and I am probably doing things in the wrong order and i am nervous i ll end up without any display I have on-board graphics on my motherboard Gigabyte K VM MAE and in the manual it says that on-board graphics is automatically disabled when you add a graphics card So in Device Manager Adding Video Card - Won't Work I uninstalled the on-board graphics shut down and installed the ATI card in PCI I connected my monitor to the new card and restarted Monitor says no signal I hooked the monitor back to the old output and i have display but with lower resolution than I had before i was able to change back to proper resolution I went back to Device Manager and the on-board graphics was still there and the new ATI card was recognized too In Properties it says Device cannot start Code What am I doing wrong Thanks Sean Acer Aspire T Adding Video Card - Won't Work AMD Sempron GHz GB HD MB DDR RAM Gigabyte K VM MAE Motherboard Windows XP Home Edition nbsp

A:Adding Video Card - Won't Work

Double check your cable. Make sure you didn't bend any pins.
 

https://forums.techguy.org/threads/adding-video-card-wont-work.548889/
Relevancy 45.15%

I just bought a usb 2.0 2 port USB PCMCIA card. When I try to install it into the slot, my laptop automatically shut off. I think it has something to do with the driver, but I'm not sure what. It came with a cd with the driver on it, which I believe I've loaded correctly (pretty simple), but after I shut down, put in the card, then start up, just as windows is starting everything will shut off. I can go into safe mode and it will go in fine, but as I mess around with enable and disabling drivers, it will again shut off. Please help!
 

A:adding usb card shuts down laptop

Please don't post duplicate threads........reply here:
http://forums.techguy.org/t114292/s.html
 

https://forums.techguy.org/threads/adding-usb-card-shuts-down-laptop.114209/
Relevancy 45.15%

I don t know if this is the right forum to post this problem or not but I need help So I ordered all of these parts for a computer I finally decided to build I bought everything except for a graphics card I put everything together and everything worked fine I installed windows pro knowing I could upgrade to windows later and then just turned off my computer and left it alone Adding Problems Card Graphics New until I got the graphics card The card came in today and I was super excited so I plugged it up and started up my computer But nothing showed up on the screen at first I was confused But then I Adding New Graphics Card Problems thought quot well maybe I need to plug the connectors to the graphics card quot So I went ahead and did that and still nothing So I started searching for answers and I ve been looking up several videos but they all seem to only have a problem when it is connected to the gpu itself and not the motherboard So to be sure it wasn t a connection problem I turned everything off disconnected the gpu and plugged back up to the mother board and it worked again Then I turned it back off and left everything connected but now I reinstalled the gpu When I turned everything back on my monitor said no signal so I tried plugging back into the gpu and no luck So to sum everything up I have Adding New Graphics Card Problems video when my graphics card isn t installed but when it is installed I lose signal from both the graphics card and the motherboard Please help nbsp

Relevancy 45.15%

Here is my computers Hardware:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03134247&lc=en&product=5192585

So I was bought this computer for a gift and I was wondering if it would be worth it if I buy a high-end Graphics card for my PC. I would like to play games like; Skyrim,the Witcher 2 Portal 2 ect. On moderate to High but my question is that if I do buy a graphics card would that improve my gameplay experience with my current hardware or would my CPU or any other hardware bottleneck with a nice graphics card.

What would be the best graphics card i could get for my PC that wouldn't be over doing it?
I already have a 700W PSU that I could install if it is worth it to buy a graphics card.