Windows Support Forum

WIFI - Which router / network did I connect to!

Q: WIFI - Which router / network did I connect to!

Ok guys I have a home office work for a large corporation but home to! connect network router / Which WIFI did - I based I have my own broadband and seperate router for gaming surfing etc I also have a dedicated works laptop which also has a dedicated WIFI router for purely work stuff Previously I made it impossible for my WIFI - Which router / network did I connect to! quot work quot router to connect to my quot home quot laptop for obvious reasons However a couple of weeks ago I needed to do some trouble shooting and allowed the home lap top to access my work network I switched it back but forgot to inhibit the from linking So today I m looking at some ahem porn didn t think much about it A few hours later I realise I m connected to the quot work WIFI - Which router / network did I connect to! quot network So Is there a way to check in Windows what router i was connected to at various times through WIFI Is it likely the ISP would advise my employer that I have looked at porn - i didn t go through the work VPN it s just a standard line from Zen into my house by my company pay the bill direct appreciate any help Dave nbsp

Relevancy 100%
Preferred Solution: WIFI - Which router / network did I connect to!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 70.95%

I have a desktop that is able to have wifi it's a adapter dell 1450 UBS Wireless 802.11a/b/g it works so does the router which is a Cisco Linsky E 1000 it shows um that it works I'm getting packet but I just can't seem to connect I don't understand it says that I am connected but I cannot get on the internet what am I doing wrong please help my desktop is compaq hp with wireless capability help!
 

https://forums.techguy.org/threads/how-to-make-my-android-with-wifi-3g-connect-my-desktop-router-and-wifi-adapter.1085239/
Relevancy 69.66%

Wifi doesn't connect when i move away from wifi router. I have a wifi router installed in my drawing room where i get good browsing speed on phones and laptops. But the problem starts when i take my laptop from drawing room to my bedroom which is not more than 5 mtrs from router. Wifi signal drops to zero on laptop whereas it remains decent on phones. Earlier my laptop used to connect in bedroom as well..This is happening lately. Is there any solution?

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Wifi-doesn-t-connect-when-i-move-away-from-wifi-router/td-p/5768546
Relevancy 68.8%

This is the idea, I have DVR for CCTV and I need to configure it for port forwarding, and since it has only LAN connection it is not possible to connect in pocket wifi, so i used to have a wireless router since it has a LAN connection. But I do not know how to do this connection as the wireless router to be a bridge in my pocket wifi to DVR, Anyone know how to do this? Thanks!
 

A:How to connect pocket wifi to wireless router, to connect the dvr for cctv?

I'm not at all sure I understand. Are you trying to use the wireless router as a Wireless Bridge (to connect to the pocket wifi via wireless and the DVR via ethernet)? If so, does the router have wireless bridge (or AP Client) mode?
 

https://forums.techguy.org/threads/how-to-connect-pocket-wifi-to-wireless-router-to-connect-the-dvr-for-cctv.1140640/
Relevancy 65.36%

I have an HP Mini laptop with Windows XP pro and It will no longer connect to my wireless router It started with McAfee Security Center warning me that my computer was not protected When I clicked fix nothing happened except to router WiFi connect Can my not that after my Wifi connection will not stay connected I scanned the system and found nothing I downloaded Malware Bytes Can not connect to my WiFi router and two other spyware products and Malware Bytes found anything and removed something called Perfessional Malware Next I uninstalled McAfee which did not solve the problem Next I repaired the IPStack then ran Winsocketfix routine Then I reloaded all device drivers from the manufacture CD and still no internet Then I downloaded and ran Combefix I also encountered this forum and followed instructions to created an attach txt DDS txt file and GMER log I am ready to upload those files when appropriate The last thing I tried was to hard code the IP address etc in the wireless connection That has allowed me to connect to a nearby unsecured connection but to weak to see the internet I still cannot connect to my wireless router I forgot to mention I have a Wire modem router Thanks in advance for your help

http://www.bleepingcomputer.com/forums/t/308506/can-not-connect-to-my-wifi-router/
Relevancy 65.36%

Hi,
I have Windows 7 on Dell N4110. I am unable to connect to my netgear router wirelessly. If i restart the router, it may work for some time but then again gets disconnected. However, i can connect to it through wired connection. Others in my apartment can connect to the router. They dont have windows 7 (they use vista, ubuntu). Its working fine for them. I have tried many things like updating the router, disabling firewall, changing wireless security settings, updating windows but none of them seem to work. My friend who has the same laptop also cant connect when I cant. It happens simultaneously. As soon as my connection is disconnected, his also disconnects. Please let me know what the problem is.
 

A:Cannot connect to wifi on my router

lets see an xirrus screen shot

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.
http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
Direct link to the program is here http://wpc.475a.edgecastcdn.net/00475A/XirrusWiFiInspectorSetup.1.2.0.exe

{If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

A user guide is available here http://www.xirrus.com/Products/Wi-Fi-Inspector/xirruswifiinspectorguide1-2-0.aspx

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
Full details are here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot

Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better.

If you are using the Mac OS then use http://www.istumbler.net/
------------------------------------------------------------------------
 

https://forums.techguy.org/threads/cannot-connect-to-wifi-on-my-router.1045246/
Relevancy 64.5%

Hello,Im having a problem related my PC's Wifi connection. Im having this problem from last 1 month.Before a month connection problem was not there.  WiFi available option shows only when my PC is placed beside to the router. If the PC is far from router wifi gets disconnected.Not even any WiFi available in that area. This is not router or network providers error(as My phone gets connected to Wifi though it is very far from the router within it's range).Installed network driver is Ralink RT3290 802.11bgn Wi-Fi Adapter.Please help me. 

A:PC WiFi gts connect only when it is nearer to router.

Hi @Hegde_Prahlad,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts, and other support personnel. I understand you are having an issue with the WiFi connection. I will be glad to help you. The following pages are helpful when troubleshooting wireless connectivity issues.Troubleshooting wireless network and Internet (Windows 10)Also, you can look at the power management for your wireless adapter:Disable the Power Off option for the adapter:1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)2. Expand the Network adapters.3. Right click on the Ethernet/Wireless Adapter and click Properties.4. Click the Power Management tab.5. Remove the check mark beside Allow the computer to turn off this device to save power.6. Click OK.7. Test.Forget a Network (Windows 10)Forget Wireless Network Profiles in Windows 10Reset the TCP/IP settings on your PC:1. Go to your start screen/menu and type CMD.2. Right click on the command prompt icon and chose Run as administrator.3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.4. Restart your PC and test.It may also help to reset the winsock catalogue:1. Go to your start screen/menu and type CMD.2. Right click on the command prompt icon and chose Run as administrator.3. In the window that opens type "netsh winsock reset" without quotes, and press enter.4. Restart your PC and test.Reinstall the network adapter drivers:1. Download the drivers from here but do not run them yet.2. Go to your start screen/menu and type Device Manager.3. Expand Network adapters.4. Right click on the wireless adapter and choose Uninstall.5. Run the downloaded drivers from step 1.6. Restart your PC and test.Test an Ethernet connection:Self explanatory. Test if the issue persists on a wired connection to rule out the wireless adapter hardware so troubleshooting can be directed towards the right areas.Test another connection:Many people rule out their home network as an issue if another device is working on the same network. Networking is not that simple. Each device interacts differently with your router or modem and it is impossible to rule out settings in that device until the notebook has been tested on another network. Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below! Thanks.

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/PC-WiFi-gts-connect-only-when-it-is-nearer-to-router/td-p/5543073
Relevancy 64.5%

Not so long ago, I started a post about connecting to router's gateway, and TerryNet helped me solve the problem wonderfully.

But now I have another problem, please help me.

I have a wifi router and a adsl ethernet/usb router, the adsl router connect to my laptop through usb port, and the wifi router connect to the adsl router throught ethernet/wan port.

I can go online with the adsl router alone but cant with the wifi.

I can connect to the wifi router's gate to config stuff, like password, wifi's name... but I just can not connect to IPS to online. Other devices can see the wifi network but when connect to it, I just can go to it's gateway.

What should I do now ?
 

Relevancy 64.5%

Hi there! I'm not not really techy. I was looking for a customer support number for Tp-link but thought that this forum may be helpful since I can't find their number anywhere on the net. Im using a Tp-link wireless router and I have a modem attached to my pc. I just noticed that if I turn off my router, the Ethernet light on my modem turns off, but the power and dsl lights are still on. Is there a way for me to use my pc even if my router is turned off? If I remember right, i've tried it before and it worked... But now, I have to turn on my router just for me to be able to connect to the net on my pc.
 

A:Can't connect to the Internet when wifi router is off

Every router user manual I've ever looked at includes a customer support number for the company. Have you looked in the manual?

Im using a Tp-link wireless router and I have a modem attached to my pc.Click to expand...

Could you be very specific about your network, beginning with your type of ISP?
 

https://forums.techguy.org/threads/cant-connect-to-the-internet-when-wifi-router-is-off.1026902/
Relevancy 64.5%

Basically, what's happened is that after transferring my old PC's data onto my new one, and putting that one in place of my old one, therefore hooking up my modem to it, my wireless devices have been having trouble connecting to the router. Everything's hooked up fine, and it was working perfectly before, but now my devices such as my laptop and Droid Pro can SEE the router (As in connect to it and say that they are getting excellent signal strength), but when I try to open my browser, it asks as if I'm not connected to anything at all. The PC that's wired to the modem through the router works fine, however.
 

Relevancy 64.5%

We cant connect to WIFI / Internet anymore since our new router was put in. The tech warned us this might happen with our laptop, and it did. First it was working fine, now it will not connect anymore. the only way we can connect is through hardwired (Ethernet cord) We cannot connect wireless anymore. Any help would be greatly appreciated.

windows 8 64 bit
X200M Asus
mick
 

Relevancy 64.5%

Dear sir,
Recently I bought edimax 150 mbps wireless N adsl2+modem router , (model name AR-7188WnA ). I have a desktop set and asus ZenFone 2 laser (model-ASUS_ZOOLD).I want to use wifi (from asus mobile)to connect this edmax modem & router without having broadband connection.please tell me the details

http://www.pcadvisor.co.uk/forum/helproom-1/use-wifi-connect-modem-amp-router-4606894/
Relevancy 64.5%

I'm posting from my phone because right now its my only access.

I have a Netgear Router model number WNR2000
I have a Gateway GM5260 model computer using windows xp.

I am currently trying to connect to my awesome neighbor's wifi connection that they so lovingly bestowed on me and my family the other day.

Herein lies my problem:
I cannot get their router and my own to connect. I'm a networking noob and could really use some assistance.
I've got a their wireless password, my router, and my ethernet cable connecting my router to my pc.
Do I need to pick up a wireless antenna to connect to my router as well?
Should I have my neighbor push the connectivity button on his router?
Dunno where to go from here.
Please help!
Thanks be in advance to anyone who understands wtf I'm going through and knows how to fix it
 

A:wifi connect using netgear router

I am currently trying to connect to my awesome neighbor's wifi connection that they so lovingly bestowed on me and my family the other day.Click to expand...

Actually they are breaking the ISP agreement in most countries.
The agreement will state that the broadband can only be used in one premises , this is so that people cannot provide neighbours with wifi ....

so as this is also against our rules - closing post

http://www.techguy.org/rules.html
WiFi "Piggybacking" / "Wardriving" - We do not support the act of using someone else's Internet without permission. Also, please note that almost every ISP prohibits sharing your Internet connection with another home, and we will not assist you in breaking their rules.Click to expand...
 

https://forums.techguy.org/threads/wifi-connect-using-netgear-router.993131/
Relevancy 64.5%

I try to connect my lumia 535 to my router but whenever I try, the router disconnects all devices for about 3 seconds and the phone indicates "The wifi network didn't respond. Try again later."

A:Why cant my Lumia 535 connect to wifi router?

Try resetting the router. Try forgetting the router on your phone and trying to reconnect also you devices are ALL trying to connect at the same time so its basically breaking your router. Try connecting 1 device at a time and working your way up.

http://forums.windowscentral.com/ask-question/346007-why-cant-my-lumia-535-connect-wifi-router.html
Relevancy 64.07%

I have a lenovo u running windows a couple of days ago it seemed my computer was infected with something giving a series of security warnings I had not seen before not av security suite It slowed the computer down for a few minutes After closing these messages there seemed the to infection, possible connect connect does can but internet router/wireless not to now network, to be no problem but then my computer was no longer connect to the internet It connects to our router wireless network but not to the internet I tried resetting and unplugging the router and the modem but still no luck We have two other computers possible infection, now can connect to router/wireless network, but does not connect to the internet on the same network that are connecting to both the network and the internet I tried running rkill and malwarebytes twice and no malicious items were detected I restored the computer to an possible infection, now can connect to router/wireless network, but does not connect to the internet earlier point - days earlier On the toolbar in the bottom right of the taskbar it possible infection, now can connect to router/wireless network, but does not connect to the internet shows a white signal bars with a quot quot inside a yellow triangle If I click on the network button it states it is quot connected quot to the network It describes the connection as quot excellent quot - bars Above the display of the available networks it states quot currently connected to Unidentified network No Internet access quot I am not computer savvy and have not run into this problem before Thanks for your time and help

A:possible infection, now can connect to router/wireless network, but does not connect to the internet

Hello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-MalwarePlease download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Full Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue with the removal process.Back at the main Scanner screen:Click on the Show Results button to see a list of any malware that was found.Make sure that everything is checked, and click Remove Selected.When removal is completed, a log report will open in Notepad.The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows MBAM's database version and your operating system.Exit MBAM when done.Note: If MBAM encounters a file that is difficult to remove, you will be asked to reboot your computer so MBAM can proceed with the disinfection process. If asked to restart the computer, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware.SUPERAntiSpyware:Please download and scan with SUPERAntiSpyware FreeDouble-click SUPERAntiSypware.exe and use the default settings for installation.An icon will be created on your desktop. Double-click that icon to launch the program.If it will not start, go to Start > All Prgrams > SUPERAntiSpyware and click on Alternate Start.If asked to update the program definitions, click "Yes". If not, update the definitions before scanning by selecting "Check for Updates". (If you encounter any problems while downloading the updates, manually download them from here. Double-click on the hyperlink for Download Installer and save SASDEFINITIONS.EXE to your desktop. Then double-click on SASDEFINITIONS.EXE to install the definitions.)In the Main Menu, click the Preferences... button.Click the "General and Startup" tab, and under Start-up Options, make sure "Start SUPERAntiSpyware when Windows starts" box is unchecked.Click the "Scanning Control" tab, and under Scanner Options, make sure the following are checked (leave all others unchecked):Close browsers before scanning.Scan for trac... Read more

http://www.bleepingcomputer.com/forums/t/396665/possible-infection-now-can-connect-to-routerwireless-network-but-does-not-connect-to-the-internet/
Relevancy 63.64%

This morning I tried connecting to wifi to WiFi suddenly unable ok router connect, but it wouldn't connect WiFi suddenly unable to connect, router ok saying that there was quot no internet connection quot it was working fine yesterday evening I restarted the modem router and verified that it was working with other devices I've tried disabling amp re-enabling the wifi adapter double checked that the wifi button was toggled on ipconfig release amp renew and a few other things but nothing has fixed the problem At this point if I restart my computer I can connect to my router for a brief period lt minute before the connection terminates and won't connect again The wifi tray icon has a yellow circle on it and I can see the available networks but I can't connect to them If I try the windows troubleshooter it will say either to check the router amp or that the LAN is disabled Running ipconfig -all shows that the media state is disconnected even though it looks to be on enabled through device manager the control panel network adapter page and the keyboard wifi button is on How can I figure out where the problem is It isn't the router since it works with other devices but it doesn't entirely seem to be the network card either since it can still see the available networks but just can't connect to them Does anyone have any idea of what to do NIC Broadcom b g n driver version

http://www.sevenforums.com/network-sharing/385985-wifi-suddenly-unable-connect-router-ok.html
Relevancy 63.64%

Hi,
I set up a wireless bridge with my TP-Link TL-WR1043ND to get better signal in my flat. (landlord provides internet via wifi AP but I have bad reception, therefore the wireless bridge) I works flawlessly. I can connect my android phone and my PC to it. Recently I tried to connect with a HP Stream 11 (Realtek RTL8723BE) to my TP-Link and it refuses to connect. Password is correct. If I connect to landlords AP directly it works and I am able to ping my TP-Link but I cannot access its web interface either. The HP Stream 11 uses Win 8.1 but this shouldnt matter afaik since my TP-Link acts as an AP.
I have no idea what could be going wrong. Any ideas???

Cheers,
Chris

http://www.sevenforums.com/network-sharing/399726-one-device-refuses-connect-wifi-router.html
Relevancy 63.64%

Same Connected connect to to router, internet can't wifi wifi network works on my laptop but not my desktop Running the troubleshooter on my desktop Connected to wifi router, can't connect to internet comes up with no errors My ipconfig all is below Thanks in advance Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users Mike gt ipconfig all Windows IP Configuration Host Name TARDIS Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address B -DB-C - B- - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - - -C -B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR Wireless Network Adapter Physical Address -DB-C - B- - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d b b d a Preferred IPv Address Preferred Subnet Mask Lease Obtained Friday November PM Lease Expires Saturday November PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EE- F-B -C - - -E - D-F DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Intel R V Gigabit Network Connectio n Physical Address C - - -E - D-F DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap B - - B - A D- B A F CA Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap E B A - BAD- CD-B - FAE AD Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Link-local IPv Address fe cbc b ea Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap BA C C- C - E-B - D D D A Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap E - A F- - C- FBF D AD Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C Users Mike gt

A:Connected to wifi router, can't connect to internet

According to this you should have a connection so something may be blocking the connection like an Anti Virus software.

Does it show up as connected but the browsers won't go anywhere? If so I have something for that.

http://www.sevenforums.com/network-sharing/262213-connected-wifi-router-cant-connect-internet.html
Relevancy 63.64%

I recently switched internet service providers from AT&T to Time Warner and ever since I have been unable to connect to my Netgear router with my computer's wifi. However, I have successfully connected my TV wirelessly to said router. One other note, my computer's wifi seems to recognize that the netgear router is there but it just refuses to connect me to the internet. Please help me rectify the issue, much appreciated!
 

Relevancy 63.64%

I have been relatively happy with my Yoga but I have run into an odd situation and would appreciate any help Specifically my device functions well with my home router but if I move to an area of the to 900: re-connect home WiFi router Yoga cannot house where the WiFi signal is weak and I get disconnected from the router I seem to be Yoga 900: WiFi cannot re-connect to home router unable to re-connect to the router when I then move back to an area of the house with a strong signal I tried turning off the WiFi and turning it back on but it still will not connect It seems the only way I can get back online is to reboot Is there a solution to this For what it's worth I do have the default driver installed Intel Dual Band Wireless AC and saw a post somewhere suggesting going to the Intel site for their driver I am not someone who enjoys tweaking settings so hopefully there is a simple step I am missing Thanks so much to anyone who has time and willingness to offer a suggestion

A:Yoga 900: WiFi cannot re-connect to home router

Hmm, my unit doesn't have that issue. Try reinstalling the Intel wireless driver: http://support.lenovo.com/us/en/products/Laptops-and-netbooks/Yoga-Series/yoga-900-13isk/downloads/D...



I'm a Lenovo advocate, part of the Lenovo INsiders program. #LenovoIN. I don't work for Lenovo.

https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-900-WiFi-cannot-re-connect-to-home-router/td-p/3308989
Relevancy 63.64%

Hi there

At home we have 2 routers, our flat is big so in ourder to get better signals I use second wifi router connected directly to 1. So we can use No1 but not able to use second router. Problems is No 2 router shows that it has network from N1 but doesnt send SSID. So all laptops in flat can't detect second Wif router. I disconnected both, waited for 1 min, plugged everythin then connected but same no SSDI is sent by router 2, what could be a problem?
 

A:Solved: Problem to connect to my wifi router

Hi koshak1981, and welcome to TSG.

Have you confirmed that WiFi is enabled on the second router and on a different channel that the first router and different channel from any channel that may be used by nearby neighbors with routers?
 

https://forums.techguy.org/threads/solved-problem-to-connect-to-my-wifi-router.1021620/
Relevancy 63.64%

I router's Solved: not Can gateway wifi connect have a modem and a wifi router i connect to internet by usb port from modem and the ethernet port i connect to the wifi router Modem address is Router addrss is I can login to the modem s gateway but can not login to router s the page keeps connecting Here is my Run cmd ipconfig all I did try to Solved: Can not connect wifi router's gateway change to default gateway of the local connection which i am using but it s not working C Users Administrator gt ipconfig all Windows IP Configuration Host Name ACER Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description TRENDCHIP USB ADSL Modem Physical Address - - -C -D - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c a c c b c ef Preferred IPv Address Preferred Subnet Mask Lease Obtained Thursday September AM Lease Expires Sunday September AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - A-CC- - - D- -C - F- DNS Servers NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Intel R Wireless WiFi Link AGN Physical Address - - C- -A - DHCP Enabled No Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Broadcom NetLink TM Gigabit Ethernet Physical Address - D- -C - F- DHCP Enabled Yes Autoconfiguration Enabled Yes Hope you guys can help me fix it thank you nbsp

Relevancy 63.64%

Hello I have a wireless adsl router in preparation for broadband arriving in our area soon long story and have some questions Network help!?!? Wifi Wifi Router / I have a laptop with wifi card and want to setup a home network with this and my PC plugged-in via LAN Wifi Router / Wifi Network help!?!? cable to the router laptop is XP PC is Win Wifi Router / Wifi Network help!?!? K I can t seem to get this to work one minute the PC can see the laptop in network neighbourhood and then the other way round but I can never access shared directories on either is there a good guide somewhere to Wifi Router / Wifi Network help!?!? set this up Also shouldn t I be able to use the router from the PC as if it were a wifi card i e on the laptop once the wifi card is plugged in it displays all wifi networks in the area and their signal strength etc how can I do this using the router PC With the laptop I can connect to our neighbours wifi router and use their bradband connection but I want to do the same from the PC is that possible Thanks in advance all P S router is a D-Link DSL- nbsp

Relevancy 63.21%

I have windows 7 32 bit on my hp 530 notebook. Since a few days when i try to connect to any network it shows connected but when i click on networks it says identifying network. I do have the latest drivers. I have windows 8 installed and wifi works fine in it.

Please reply.
 

Relevancy 63.21%

I have recently bought a router, the Fritz.Box Home Server 1&1 VDSL. I have set it up via wifi and can connect to the internet without a problem.
However, I would like to connect my PC to the router via LAN.
When I put the LAN cable into my PC and the router, both my PC and my router react and tell me there is a connection but they do not recognize each other. The router says there is something in LAN1 and the PC says there is a LAN cable without a connection. I cannot access the router via LAN, only via wifi.
My PC uses the Killer Network 2200e driver, I tried removing it and then manually adding it again, it did not work. My IPv4 settings seem fine, too, I have no idea what to do now.

A:Ethernet won't connect to router, wifi works fine

and welcome to the Forum

Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then: check your browser's settings, remove any proxy settings if found, here's how


Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type or copy and paste the following command:

ipconfig/all > 0 & notepad 0

and press enter.

Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

http://www.techsupportforum.com/forums/f31/ethernet-wont-connect-to-router-wifi-works-fine-1103938.html
Relevancy 63.21%

I have recently bought a router, the Fritz.Box Home Server 1&1 VDSL. I have set it up via wifi and can connect to the internet without a problem.
However, I would like to connect my PC to the router via LAN.
When I put the LAN cable into my PC and the router, both my PC and my router react and tell me there is a connection but they do not recognize each other. The router says there is something in LAN1 and the PC says there is a LAN cable without a connection. I cannot access the router via LAN, only via wifi.
My PC uses the Killer Network 2200e driver, I tried removing it and then manually adding it again, it did not work. My IPv4 settings seem fine, too, I have no idea what to do now.

http://www.techsupportforum.com/forums/f338/ethernet-wont-connect-to-router-wifi-works-fine-1103938.html
Relevancy 63.21%

I have a slightly different setup so I'm hoping somebody might have some suggestions on what I can try.

I have Comcast Xfinity Internet and a Motorola SB6121 model - have all worked great for years no problems.

I have the modem in my garage with a wifi router and a router for various rooms in my house. My home computer is in an office and previously I had a wired connection that worked great.

I changed wifi router to a new Netgear and the internet connection from the modem is working, the wifi is working, but my home computers ethernet connection will no longer connect...

Any thoughts on what to try other than powering off and on model / routers / computer which I have tried?

Mike

A:Changed wifi router, now ethernet doesnt connect - Win 8.1

You can only have one router on your network. For extending coverage, you use Access Points

As for the Ethernet problem, go back and double check your connections to the router.

If you cascaded routers in what are called "Edge Routers". Changing your first router, without any changes on the others can be why you only have a connection to one router and not out to the Internet.

It is really easier to show someone what they did wrong, then explain on a forum.

http://www.eightforums.com/network-sharing/70367-changed-wifi-router-now-ethernet-doesnt-connect-win-8-1-a.html
Relevancy 63.21%

Just hooked up to att uverse ,they installed a att200 modem/router ,I have 12 mbps internet. I cant seem to make it hook up to the router
I have tried to enter the info on the printer keypad and throught the computer. computer is pent. 4 ,xp,

I was able to connect my laptop and kindle to the router.
I am not sure if the printer is recognizing the router or vice versa.
in general I dont know what is happening

I just found out it will print from my laptop,so I think my printer is connecting to the router,correct?
just tried to print from laptop again and did not work.
the wifi light on the printer is off.
it used to work great with the other router before att upgraded me

Printer is a epson workforce 520

It is a motorola router
 

A:AT&T installed new router/modem now my printer will not connect wifi

It worked, then didn't work? What? :S

Maybe check the wifi encryption. Make surei t's WPA2 and not anything else.
 

http://www.techspot.com/community/topics/at-t-installed-new-router-modem-now-my-printer-will-not-connect-wifi.192245/
Relevancy 63.21%

My new kindle cannot connect to wifi in my house. we have a cisco linksys router. we have wpa2 personal security and i have entered the password many, many times so i know i am not typing it wrong. I have tried removing the security from the router to see if it would connect and it still will not. I wondered if it was just the Kindle malfunctioning, so i took it to a friends house and it connected to her router right away with no problem. I have also tried removing the firewall... i dont really know what the point of that would be but i tried anyways. I also tried restarting the Kindle because that is supposed to help, but it did not. please help!
 

Relevancy 63.21%

Hi All,

I have Dlink Router DIR-890L. I have set up the security with WPA/WPA2-Personal and saved the changes but the connection stays open and unsecured. All my neighbors are able to connect because it doesn't prompt them for a password. I have upgraded the router to the latest firmware and still the same problem.
Lately I've been using the MAC filter to keep people off my connection but this is impractical when I have guests over. Also disabling broadcasting doesn't allow my phone to reconnect automatically.

Any ideas anyone?

Thanks in advance!

http://www.sevenforums.com/network-sharing/388346-dlink-router-wifi-connect-without-password-promt.html
Relevancy 63.21%

I have never run into this before.

I have a dsl modem/gateway (actiontec) which i use to connect to the internet

when I connected a Linksys WRT54G v.4 router to my laptop thru RJ45, WITH wifi disabled on the router, I lose connectivity to the internet on the wifi connection.

I'm used to XP with independent connectoids. Looking at the properties on each connection, they appear to be correct.

Has anyone run into this on Vista?

I thought surely by disco'g the wifi on the Linksys Router it should just be a standard wired connection.

both routers are setup for DHCP. Is that what's confusing Vista?

weird. appreciate any help. I am so out of troubleshooting ideas.

A:Can't Connect wifi w/internet when connected to RJ45 to another Router (x64)

Originally Posted by notech


I have never run into this before.

I have a dsl modem/gateway (actiontec) which i use to connect to the internet

I connected a Linksys WRT54G v.4 router to my laptop thru RJ45, WITH wifi disabled on the router, I lose connectivity to the internet on the wifi connection.

I'm used to XP with independent connectoids. Looking at the properties on each connection, they appear to be correct.

Has anyone run into this on Vista?

I thought surely by disco'g the wifi on the Linksys Router it should just be a standard wired connection.

both routers are setup for DHCP. Is that what's confusing Vista?

weird. appreciate any help. I am so out of troubleshooting ideas.



can you just run through your post again, you seem to be saying that you have disabled your wireless on your router and you lose connection on the wireless connection on your computer.
you will, because you disabled it.

http://www.vistax64.com/network-sharing/208242-cant-connect-wifi-w-internet-when-connected-rj45-another-router-x64.html
Relevancy 63.21%

Greetings. My name is Randy. I got home after work yesterday and was unable to get my laptop or Android phone connected to my home network. The modem showed everything was working fine and the router was fine.
 
Then I noticed in the list of surrounding wifi hotspots, a new one I'd never seen -- Trojan.??? It was named Trojan dot something, like b9 or something like that. I cannot recall but can see it later tonight.
 
I have a TP-Link TL-WR940N V3 Wireless N450 Home Router.
 
Very troubling. Want to take care of this ASAP.
 
Thank you! 

http://www.bleepingcomputer.com/forums/t/625458/wifi-hotspot-trojan-cant-connect-to-home-router/
Relevancy 63.21%

My phone won't connect to my Belkin router (F5D7230-4) thru the wifi connection. It previously had connected fine, but I'd reset the router today & changed the password. I'm able to connect with no problems (thru wifi or regular connection) on my pc. I went to my Belkin router page and have looked at my MAC settings (only option it gives is to clone, which I tried), I've also tried changing the password....my phone also gave me the option of hitting the WPS button on my router within 2 minutes, which I did, but it would not configure automatically as it was supposed to.

When I try to get on, on my phone, it'll say connecting, then authenticating, then eventually disable.

I would appreciate any suggestions. I did a search in the forum and saw a couple similar questions but none of those answers/steps seemed to allow me to connect. Thanks.
 

A:Samsung Galaxy S2 won't connect to home router/wifi.

from a pc can we see an ipconfig /all

then on the telephone from the network settings - would you post back the IP address, Subnetmask, default gateway and DNS settings if available

you could try logging into the router and removing the wireless security and see if the phone now connects - if it does - put the security back on and try again
------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.
http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
Direct link to the program is here http://wpc.475a.edgecastcdn.net/00475A/XirrusWiFiInspectorSetup.1.2.0.exe

{If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

A user guide is available here http://www.xirrus.com/Products/Wi-Fi-Inspector/xirruswifiinspectorguide1-2-0.aspx

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
Full details are here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot

Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better.

If you are using the Mac OS then use http://www.istumbler.net/
------------------------------------------------------------------------
 

https://forums.techguy.org/threads/samsung-galaxy-s2-wont-connect-to-home-router-wifi.1035262/
Relevancy 63.21%

Hello,

I really need help since I'm not computer savy. Yesterday, I stupidly decided to disconnect my modem and router because all the wires were a mess!! Well, now I'm not sure if I reconnected correctly, but I guess I did since I can get online but have no wifi. My router password is working, however, when I entered all the wireless/security stuff on the Linksys site it just keeps bringing back to the basic set up page . I hsve no idea what is wrong. Any ideas? My router is a Linksys N300.

Thanks so much! I spent about 8 hours yesterday trying to fix this. Losing my mind!
 

A:Router won't connect, no wifi (moved from Windows 8 forum)

Might help to give us the actual model number of your Linksys router. The N300 refers to a type, not a model number. Wouldn't hurt to tell us the brand and model number of the modem.

Please tell us exactly how you have the computer, router and modem wired to each other, by referring to how the ports are named and labeled.

When you say, "I can get online but have no wifi", do you mean you your computer can get to the Internet only with a wired connection?

When you say the, "Linksys site", do you mean the web based administration pages on your Linksys router?

When you were changing the wireless and security settings, did you need to click a button the settings pages to actually save the settings.

Does your router show up in the list available WiFi connections on the Windows network connection list?
 

https://forums.techguy.org/threads/router-wont-connect-no-wifi-moved-from-windows-8-forum.1169942/
Relevancy 62.78%

Hi,

Network Description:
5 computers are connected to Linksys router (192.168.1.1).
the Linksys router is connected to the internet.

NetGear router is connected to the Linksys router (192.168.0.1).
2 computers are connected to NetGear router.
These 2 computers are able to surf the Internet but I can't see the other computers in network through them...

How should I configure the NetGear router to be able to see the other computers in the network

BTW: all the computers configured to WORKGROUP

Thanks
 

A:Connect router to router and be able to see all the computers in network

There`s a good page HERE which almost certainly has the solution somewhere.
 

http://www.techspot.com/community/topics/connect-router-to-router-and-be-able-to-see-all-the-computers-in-network.54161/
Relevancy 62.35%

how to connect asus tf103c to alcatel one touch wifi router,cant connect asus to internet as I dont have a wifi connection with alcatel unit,

A:how to connect asus tf103c to alcatel one touch wifi router

What is the model number of the router? They produce many.Have you Googled for instructions?Always pop back and let us know the outcome - thanks

http://www.computing.net/answers/windows-vista/how-to-connect-asus-tf103c-to-alcatel-one-touch-wifi-router/13821.html
Relevancy 62.35%

Hi, I have just bought a Wansview NC541W IP Camera to monitor my home while I am at work (my home was burgled recently) and I have no idea how to connect it to my broadband router wirelessly. I went onto the network settings of the Camera and set up the wireless setting to connect to my router network (typed in the SSID and wireless pass key etc) but nothings happening?!? I can connect the two devices with an Ethernet cable and have the camera working perfectly, but can't do it wirelessly!! I'm so frustrated as I literally know nothing about all this complicated technical stuff! Please help!!
 

A:How to connect Wifi enabled IP Camera to my router?? (Wansview NC541W)

are you using the correct password key

I would log into the router and remove the wireless security and see if the camera works that way first
and then re add the security
 

https://forums.techguy.org/threads/how-to-connect-wifi-enabled-ip-camera-to-my-router-wansview-nc541w.1018642/
Relevancy 62.35%

i have wimax usb modem and tenda wifi router with rj45 ports. how do i connect them, please im not so good at computer so i will request step by step procedure. i dont want to buy a new modem.
 

Relevancy 62.35%

Hello

I recently got the newest NETGEAR router device, the NETGEAR Nighthawk X8 AC5300 Smart WiFi Router, and I am unable to connect to the 5GHz WiFi it provides on its Tri-band WiFi. I am currently only on its 2.4GHz WIFI, which I assume is lesser than the 5G. I am able to connect to the 5GHz on my smart phone, so I know it exists from the router. I am running a windows 8.1 currently on a desktop on an HP Envy 700-213 Desktop PC.

Edit: My computer supports 802.11b, 802.11g, and 802.11n radio types - which supports 5GHz WiFi
My adapter is a Ralink RT3290 802.11bgn Wi-Fi Adapter

Any ideas for why I am unable to connect to this WiFi?

A:Unable to connect to 5GHz Wifi on NETGEAR Tri-Band Router

The most likely explanation is that the wifi adapter in your HP Envy 700-213 doesn't support the 5Ghz band.

If you really want to connect at 5Ghz you will need to get a new wifi adapter for your computer.

http://www.eightforums.com/network-sharing/71352-unable-connect-5ghz-wifi-netgear-tri-band-router.html
Relevancy 62.35%

One of the laptops at work is having issues, and I think someone with monkey hands screwed something up. As "the computer guy", it's on me to get it fixed.

His Windows 7 computer will not connect to a wifi network. It can detect them (so I know the radio is on), but after half a beat, I get that "windows was unable to connect" message".

Thinking it was the internal card, I connected my external antenna, and got the same error. So I think I can rule out hardware. I tried using an identical laptop from work, and that one connected with no problem. So I think I can rule out any issues with my router.

I've updated all the possible drivers on the computer, Windows is up to date, and i've disabled IPV6.

Here's where it gets weird. He can get an intermittent connection when he uses his phone's hotspot.

A:Windows 7 wont connect to wifi (not a hardware / router issue)

can we see an ipconfig /all and an xirrus
also
What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, Mcafee , AVG etc

have you tried a restore to a working date ?

usually company PCs are configured in such a way - that we are unable to provide assistance - as we may suggest doing something which is outside the companies process/rules

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
The results from the notepad should now appear in the forum reply.
------------------------------------------------------------------------

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

Wi-Fi Inspector | Xirrus
Direct link to the program is here Wi-Fi Inspector Confirmation

{If the above link does not work heres another link Xirrus Wi-Fi Inspector | PCWorld}

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need will need to have NET Framework installed for the WiFi Inspector to function.

Run the program

A user guide is available here http://www.xirrus.com/cdn/pdf/Xirrus...-1-RevB-6.aspx

post a screen shot of the program running.
if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information.

post which SSID name is yours, its located in the list, under network "Adapter Name" (1st column)

To post a screen shot of the active window.
1) hold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
OR
2) if you are using Vista/Windows 7 you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool

To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.

Note:
For a reliable (or robust as the Xirrus user... Read more

http://www.techsupportforum.com/forums/f31/windows-7-wont-connect-to-wifi-not-a-hardware-router-issue-669259.html
Relevancy 62.35%

Hi guys - setting up computers in my new home and have got the wifi working fine with my BT connect wifi Router to Ethernet Cannot via BTHub3 but Wireless works - Home Hub router works for laptops mobile devices etc Have been trying to connect via Ethernet for a laptop and home pc for a faster more reliable connection but it doesn't seem to be working When plugged in the Network and Sharing Centre simply displays the loading blue circle with 'identifying' but no network access When clicking on the Local Area Connection Status both IPv and IPv connectivity state no network access but I can't seem to find Cannot connect via Ethernet to BTHub3 Wireless Router - but wifi works any hardware problems on the laptop The same issue occurs for other laptops at home and I know my laptop works with Ethernet at work Running ipconfig all shows that DHCP is enabled I checked this on the properties tab for the IPvs autoconfiguration is enabled I can add in a copy and paste of the whole ipconfig all if that's helpful - 'media disconnected' shows for Tunnel adapters but I don't really understand what they are If anyone could help at all I'd be really grateful

A:Cannot connect via Ethernet to BTHub3 Wireless Router - but wifi works

Could be that the router is only set to wifi.
go to your router setting page open it (192.168.0.1) check the settings there,
password is probably admin if you havn't changed it, please do change it if you havn't.

Or plan B reset the router

Roy

http://www.sevenforums.com/network-sharing/377034-cannot-connect-via-ethernet-bthub3-wireless-router-but-wifi-works.html
Relevancy 61.92%

I used a repeater to increase my signal in my garden on the other end of my house, that works perfect. But the signal strengt of the WiFi connection on my PC is lower and also my internet speed. Removeing the repeater gives a internet connetion loss (for a shrot time) so it seems like my PC's preferred connection is to the repeater (witch is further away then my router).

I can choose to give my repeater a different SIDD name so i can choose manually but i prefer the same name.
Is there any way to force my PC to connect to my router with the same SIDD? ( i have a DLink dir 655)

A:WiFi repeater, weaker signal. Can i force Win7 to connect to router?

Repeaters are the same as a network bridge, they cut the bandwidth in half which is why I don't like them. This is why the connection seems slower to you.

Much better off with a wireless access point connected to a wired connection.

With the same SSID it's usually going to pick the connection with the better signal strength. You can choose to forget the other network which would force Windows to choose the 655.

http://www.sevenforums.com/network-sharing/334506-wifi-repeater-weaker-signal-can-i-force-win7-connect-router.html
Relevancy 61.92%

Whenever I unplug from the router and go upstairs, I can't connect to my wi-fi. The problem also persists downstairs unless I am connected by ethernet. It's been happening for about 2 days. At first the wi-fi would jump in and out randomly and quickly but now it simply wont connect. Is it a virus or how can I fix it?
 

A:Wifi doesn't connect unless directly connected to router by ethernet cable

You might just need to restart your router / WiFI AP to resolve that issue.
 

http://www.techspot.com/community/topics/wifi-doesnt-connect-unless-directly-connected-to-router-by-ethernet-cable.202219/
Relevancy 61.92%

I hooked up my new Linksys E2000 router, and all devices connect no problems. 3 Windows 7 machines, a 3DS, the wii, and the ps3 can all access the internet just fine. My only Vista machine will not connect to the internet, just local only. I have tried assigning a static IP and I have restarted my network adapter, machine, router and modem to no avail.

Not sure what would be causing this. Any ideas?

A:Vista machine wont connect to Linksys E2000 router WiFi

Hello.. a tough one here.. have you hard wired and tried to set it up for wifi service ? Just strange , all other devices get internet, cept this one unit.

http://www.vistax64.com/network-sharing/294063-vista-machine-wont-connect-linksys-e2000-router-wifi.html
Relevancy 61.49%

This is my first time ever posting a question online so I hope it gets resolved lol Anyways I have win on my pc connect to the Can't network!! wifi I kept it on the other night and went off to bed Next day I go to work and Can't connect to the wifi network!! come back at night I see my comp can t connect to the wifi which it is supposed Can't connect to the wifi network!! to So I went on to restore it thinking it ll solve the problem which it should have but again it didn t I thought I didn t have a good restore point so I reinstalled a fresh copy of win on my pc but still the comp doesn t connect to the wifi I live in a student house there are eight of us and no one is having a problem like me What changed that day was during the time i was out my friends brought the router on the first floor from the basement which is infect closer to my room I have no problems connecting my phone to the wifi and I reinstalled the whole is on my pc so I don t seem to figure out what could be the problem I have integrated wifi on in my cpu Please help me out I am going bonkers with this problem nbsp

Relevancy 61.49%

Not sure if this the right place to ask but I need some help Okay for some reason I am unable to connect to my wifi network It was working fine Monday morning before I left for work but when I came back I got a message saying cannot connect Everyone else s laptops and tablets are working just fine It is just my laptop I ve been trying to fix it for the past few days but I ve gotten network. Can't to connect my wifi nowhere I tried everything I know to do I tried Trouble shooting Resetting amp unplugging the router Bringing back my laptop to an earlier date Checked amp changed the wifi name amp password I tried upgrading to windows though I went back to when it didn t work I even reset my laptop to its factory settings When I trouble shoot I get Can't connect to my wifi network. the following messages Cannot connect Try unplugging the router for seconds and try again Cannot connect to hidden network it s not hidden I been to the little router modem page for it and it says it is not my laptop just thinks it is Plus I can see it in my connection network list My laptop runs fine for the most part and it can connect via cable but I have to stay in the kitchen which is inconvenient for everyone My laptop is quite old though at least or years Might I need to buy a new one I d rather not if I can avoid it since like I said for the most part my laptop works fine nbsp

https://forums.techguy.org/threads/cant-connect-to-my-wifi-network.1166337/
Relevancy 61.49%

My computer is having trouble connecting to one single wifi network. I have other devices connected to the network, so I know it works, my laptop won't connect, though. I thought Windows 8 may have been the problem, but it will connect to any other wifi but this one. I looked through this thread http://forums.techguy.org/networking/1027100-laptop-wont-connect-one-particular.html but it wasn't particularly easy for me to understand.

I have already done the easy troubleshooting steps, such as turning airplane mode off/on, forgetting the network and re-signing in, etc.

Thank you for your help!
 

Relevancy 61.49%

Hi Guys I've been having a weird wifi problem since last wifi network to connect Can't Friday For some reason my laptop can't connect Can't connect to wifi network to any Wifi network anymore Every time I try to connect I get the following messages - checking network requirements -Can't connect to this networkI've tried everything I found online and nothing worked -Uninstalling and Can't connect to wifi network reinstalling the wireless drivers Event with different versions - Did a windows system restore -Turning wireless driver on and off - Restore the computer to its factory state using the Lenovo OneKey recovery -Scan the computer with McAfee and Malwarebytes antimalware for any threat If I connect using ethernet everything works perfectly Computer Info -Lenovo G - -Model -Windows - bit-NIC Realtek RTL BE Wireless LAN n PCI-EI some how believe that this issue is related to some Windows update that messed up the wireless driver How ever I'm not sure if the updates are desinstall with the lenovo system restore Another thing that caught my atention is that if I go to Device Manager- gt Enter the properties of Realtek RTL BE Wireless LAN n PCI-E - gt Advance There are some missing Properties in the list like Network Address I'm not sure if that is important Please let me know if there is any other info you guys need Regards

A:Can't connect to wifi network

Hi
My wife has a Lenovo G50-45 with windows 8.1 64 bit and had an almost identical problem. A new Wi-Fi card fixed the problem.
Hope this helps.

http://www.bleepingcomputer.com/forums/t/589710/cant-connect-to-wifi-network/
Relevancy 61.49%

I am not being able to connect to any of the wifi networks. When I try to connect it keeps saying "Can't connect to this network". I've tried searching solution for this in eightforum and Google but none worked. Things I did:
Forget network & tried reconnecting
Reset router
Uninstall/Reinstall/Update Network adapter drivers
Clean install windows 8

The last time I was able to connect to the network was a week ago.

I found that when I turn on hotspot in my android smartphone, my laptop gets connected to it. But I can't connect to any other wireless networks.

So guys can you help me resolve it?

A:[wifi] Can't connect to this network [Win 8]

Welcome to Eight Forums,

Just a little experiment to do.... if your laptop has a bluetooth try disabling it, that goes as well to the ethernet adapter.

http://www.eightforums.com/network-sharing/64677-wifi-cant-connect-network-win-8-a.html
Relevancy 61.49%

I'd like to add a new 802.11n WiFi router to my home network, one that comes with parental controls build into the router.

Just wondering if someone has a recommendation on a good make/model to buy?

Thank you
 

https://forums.techguy.org/threads/best-wifi-router-for-home-network.1032032/
Relevancy 61.06%

My laptop wont connect to any wufi i tried like connections and none of them work. I put the password and it says connecting but never connects it then it says that my wifi has changed the information but i havent changed anything.

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Wont-connect-to-wifi-network/td-p/5635067
Relevancy 61.06%

I recently bought a Windows 7 Gateway computer, but was unaware that Windows XP was installed. Now, I am having trouble connecting to my network whether it be through WIFI or Ethernet cable.
 

A:How can I connect to a WIFI network on Windows XP?

so is it a dual boot with a choice of W7 or XP
or just XP

can we see an ipconfig /all
------------------------------------------------------------------------

ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries

For Windows 8 or Windows 10
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop.
http://www.bleepingcomputer.com/tutorials/open-an-elevated-command-prompt-in-windows-8/
Use Windows + X Keys together and choose Command Prompt (Admin) from the list.​Or Right click on the windows icon - bottom left hand side - A menu appears - choose Command Prompt (Admin)[/indent]

For windows version, XP, Vista, W7
Hold the Windows key and press R
Now type CMD
Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):​

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt ​
It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
The results from the notepad should now appear in the forum reply.
------------------------------------------------------------------------
 

https://forums.techguy.org/threads/how-can-i-connect-to-a-wifi-network-on-windows-xp.1167024/
Relevancy 61.06%

Hi,
i have hp 15-r007tx notebook and window 7 ultimate os. I have installed many drivers for wifi adapter - RT3290 802.11 b/g/n. It shows the available wifi networks.. but i am not able to connect to any network. Pls help.
 

Relevancy 61.06%

Hi all,

I've read through threads but they don't seem to answer my dilemna.
I have a Cisco Systems Linksys router & my laptop says I am connected to "linksys" but I can't browse or link to any websites.
I don't know what other details to add but would really appreciate some help...

Thanks in advance!
 

Relevancy 61.06%

Hi guys Let me explain my current situation before asking my question I have a Motorola Netopia - VDSL modem router with WiFi The type of signal that I get from my ISP is analogue for firewall network WiFi to my How to connect phone TV and intenet This modem has an input for the Internet connection dynamic IP address and provides the IP addresses and connection for the other devices connected to it via WiFi or cable such as the TV over IP box laptops iPads and smart phones I would like to implement content filtering on my WiFi network in order to avoid access to some websites and my modem router doesn t provide this feature or at How to connect firewall to my WiFi network least I can t find it with my ISP s configuration I thought about using OpenDNS but since I have a dynamic How to connect firewall to my WiFi network IP address and I can t install an updater on all the devices then this solution didn t work The next idea I have is getting a physical Firewall Question I am wondering if I can just connect the Intenet cable that comes from the How to connect firewall to my WiFi network splitter between phone and Internet to the Firewall then I connect a RJ- cable from the firewall to my existing modem router and should that be all besides configuring content filtering on the firewall What should I take into account regarding the IP addresses Should I enable the DHCP server in the firewall I assume that most come with one and disable the DHCP server in the modem Any guidance around this topic would be highly appreciated Thanks nbsp

A:How to connect firewall to my WiFi network

You seem to have the general idea. In fact, the idea would be to turn off DHCP on the old (wireless) router and enter the address of the new router as the old one's gateway. That's pretty much all it would 'generally' take. However, if you have VDSL, then you would need to purchase another VDSL router. In which case, you might as well just purchase one that has the wireless and not have to worry about all of the configuration issues.

However, I looked up the Netopia 7347-44 router and, from what I could find in the manual, it appears as though it does have a firewall already built into it. Check it out here: http://www.motorola.com/staticfiles/Video-Solutions/Products/Wireline%20Networks/Gateways_and_Routers/DSL_Gateways_and_Routers/7347-44_7357-44%20Netopia%20Voice%20Integrated%20Access%20Device%20Gateways/_Documents/_Static%20files/7347-44%20Data%20Sheet-556054-001-b.pdf Al right, that's not the *complete* manual, but it specifically states that it has 'Stateful Packet Inspection Firewall'. Might want to browse around in the router configuration utility and see what you can find.

If that's not your router, then you should be able to simply do as above and be good to go...

Good Luck!
 

https://forums.techguy.org/threads/how-to-connect-firewall-to-my-wifi-network.1021351/
Relevancy 61.06%

Yesterday my WiFi went out and I am trying to figure out why Short summary Windows never had any connectivity issues Landlord has the router Fios I have an Optimum Cable account if I need a WiFi back up or WiFi on the go The hardware WiFi to network issue: Connect Can't this to connect to WiFi are http www amazon com gp product WiFi issue: Can't Connect to this network B WXSO psc WiFi issue: Can't Connect to this network amp redirect true amp ref oh aui detailpage o s http www amazon com gp product B GR YI psc amp redirect true amp ref oh aui detailpage o s primary adapter I have had the two adapter set up for a while now and never had an issue with conflicting hardware issues I have used the Fios router ever since I moved in the place using both Windows and with no issues However now I cannot connect to either the Fios and Optimum accounts anymore I have disabled all adapters and enabled one at a time nothing I have uninstalled all adapters rebooted the PC and reinstalled nothing I have physically taken the adapter out of the PC and reinserted the card nothing I have moved the antenna adapter to different USB slots nothing I do not have access to the Fios router so I cannot to a hard reset I do not have an ethernet connection I did not receive any Avast alerts at all before or after the disconnect Landlord said he did not change any of the Fios settings including the passcode I am at work and will not be able to do any fixes until I get home tonight I have run out of ideas Whe I get home I will run a visus scan and Malware Bytes scan just to be certain but I find it odd that both adapter will not allow me to connect anymore Edit Just found this thread and will post my results in the morning https forums techguy org threads cant-connect-to-this-network I also use both the Windows and Avast firewall They have never conflicted before and I have not had any issues with them running nbsp

Relevancy 61.06%

I can't connect connect to my home wireless network. It says I am connected but none of my browsers will load anything.
I can connect to other wireless networks that i have access to.
I can connect if i plug into the router directly
All of the other computers in my house connect just fine.
Any thoughts
 

A:Can't connect to Wifi on home network but everyone else can

I think its a security issue.
1) Check the password you put in and make sure its written correctly with the right case (lowercase/uppercase).
2) Disable any 3G/4G connections if you have any.

If that doesn't work giive me more information about your network:
1) General network layout (two computers, one laptop/one desktop, w/dsl modem to a residential gateway, etc)
2) Also, tell me what security mechanism you have on your wireless access point (WEP, WPA, WPA2). If you're using CCMP/AES and you have an older computer then you may not be able to use them together.
 

https://forums.techguy.org/threads/cant-connect-to-wifi-on-home-network-but-everyone-else-can.1019073/
Relevancy 61.06%

Hey all!

Few days ago I got Acer V5-531. On this laptop, I can easily connect to wireless networks, but my home one. I could do it on my old laptop with no problems. How is it possible to solve this? It's getting quite annoying, especially knowing that this is the only network I can't connect to. In case with this network, it prompts password and then says "Unable to connect".

What have I tried

Air Mode is off
Updating/rolling drivers back
Resetting the router once (owned by neighbor, thus, I cant perform all maintenance on it)
router lights are on
pw is correct
wireless switch is on
What else can be done?
Thanks all!

http://www.eightforums.com/network-sharing/17915-unable-connect-certain-wifi-network.html
Relevancy 61.06%

Hi I've searched the web endlessly trying to solve this problem with one of my laptops - without any luck at all Hoping someone here is able to assist My main PC laptops an iPhone and an iPad all connect to my home wifi network All worked perfectly until days ago The laptops and my PC all run Windows all updated days ago my Toshiba own connect to wifi Unable to network Qosmio stopped Unable to connect to own wifi network being able to Unable to connect to own wifi network connect to my home network All other devices still connect perfectly The Qosmio doesn't detect my wifi network I immediately went to the network adapter's Qualcomm Atheros website and downloaded the latest driver Installed it and for a brief very brief time it could once again detect and connect to the network Last days unable to either detect or connect It detects other networks Unable to connect to own wifi network fine and has no problems connecting to any other network - except mine doesn't even detect mine anymore It connects to the iPhone when used as a hotspot without any issues I've uninstalled and re-installed the new driver re-booted the wireless router several times re-set the router to factory settings used Windows trouble shooter checked amp deleted the netsh profiles Re-booted the laptop a dozen times disabled amp uninstalled software for the laptop's Bluetooth It simply stopped working I've tried everything I can find on the web - without any success at all I've had the laptop sitting only a few cm from the router Not sure where else I can go with this now - it has quite defeated me If anyone has any suggestions please help Getting very very frustrated Thanks

A:Unable to connect to own wifi network

how does the LAN work is it connecting? Do you have Reserve IP for each of your devices on your router?

http://www.eightforums.com/network-sharing/54411-unable-connect-own-wifi-network.html
Relevancy 61.06%

Hello I can't seem to connect a laptop to the wifi network. Windows xp service pack 3 I have other devices connected on the network and I am able to connect onto other networks with this laptop.I have tried to enable and disable radio and to connect without security enabled and it still doesn't work. I have checked intel's site and it says I have the latest driver for my adapter.
Windows IP Configuration

Host Name . . . . . . . . . . . . : mccloske-4bc923

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected

Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection

Physical Address. . . . . . . . . : 00-16-6F-4B-66-78

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected

Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller

Physical Address. . . . . . . . . : 00-14-22-D9-D6-C8
 

A:can't connect laptop to wifi network

Often with that adapter you need the driver from the laptop manufacturer's web site.

I think that adapter is not compatible with WPA2. Try with no encryption and if that works then try WPA-PSK.
 

https://forums.techguy.org/threads/cant-connect-laptop-to-wifi-network.1094763/
Relevancy 61.06%

Hello

I'm green in the manner

My daugter laptop use to connect to the home network. The network name is recognize by the laptop
The signal strength is 100%

Windows diagnostic say to verify the laptop configuration to match the wireless network router.

Where do I see those parameters

What should I look for?

Martin

A:Can't connect Laptop to wifi network

Hello,
Does she have internet access meaning can she see Google?
Im on an Ethernet but it should look something like this:

http://www.sevenforums.com/network-sharing/325893-cant-connect-laptop-wifi-network.html
Relevancy 61.06%

Hello I am trying to connect a Windows laptop to a WiFi network that is using a MAC address filter When I attempt to connect Windows reports that it is quot Checking network requirements quot Then it reports that it quot Cannot connect to this network quot I have been able to connect dozens of other devices running everything from iOS to Android to Windows with no problems However this is my first Windows attempt I am not sure what I am missing Things I have tried so far I have triple checked the MAC address to make sure I have the correct one Contacted the manufacturer of the router and applied the recommended firmware updates Checked the laptop manufacturer for driver updates for the wireless adapterTurn off the MAC filter on the router When I turn off the filter the laptop connects immediately That leads me to think that problem is a data entry error with the MAC address To eliminate any possibility of error I cut and paste directly from what ipconfig reports as the MAC address for the wireless adapter See below for details Code thernet adapter Ethernet Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe GBE Family Controller Physical Address C- - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - D- - -D -BF DHCP filter using that Cannot WiFi connect is MAC network a to Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Media State Media disconnected Connection-specific DNS Suffix Description Intel R Dual Band Wireless-AC Physical Address Cannot connect to WiFi network that is using a MAC filter B - D- - -D -BE DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Teredo Tunneling Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes I am using the MAC address for the Wireless LAN Adapter Thank you in advance for any information that you might have Timoteob

http://www.tenforums.com/network-sharing/38584-cannot-connect-wifi-network-using-mac-filter.html
Relevancy 61.06%

Sir, I am facing problem with connectivity on WiFi... On available networks it always show can't connect to a network...

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Unable-to-connect-to-any-WiFi-network-available/td-p/5847764
Relevancy 61.06%

I have the same problem here that's My quot Network txt quot data Code Wireless System Information Summary Time Egypt Standard Time SHOW DRIVERS Interface name Wi-Fi Driver RT USB Wireless LAN Card Vendor Ralink Technology Corp Provider Microsoft Date Version INF file C Windows INF netr inf Files total C Windows system DRIVERS netr sys C Windows system drivers this network problems) connect Can't (wifi to vwifibus sys Type Native Wi-Fi Driver Radio types supported b g FIPS - mode supported Yes w Management Frame Protection supported No Hosted network supported Yes Authentication and cipher supported in infrastructure mode Open None Open WEP- bit Open WEP- bit Open WEP WPA-Enterprise TKIP WPA-Enterprise CCMP WPA-Personal TKIP WPA-Personal CCMP WPA -Enterprise TKIP WPA -Enterprise CCMP WPA -Personal TKIP WPA -Personal CCMP Authentication and cipher supported in ad-hoc mode Open None Open WEP- bit Open WEP- bit Open WEP WPA -Personal CCMP SHOW INTERFACES There is interface on the system Name Wi-Fi Description RT USB Wireless LAN Card GUID cabb - - aa- b f-bcd bdaebe Physical address eb State disconnected Hosted network status Not available SHOW HOSTED NETWORK Hosted network settings ----------------------- Mode Allowed Settings lt Not configured gt Hosted network status --------------------- Status Not available SHOW SETTINGS Wireless LAN settings --------------------- Show blocked networks in visible network list No Only use GP profiles on GP-configured networks No Hosted network mode allowed in WLAN service Yes Allow shared user credentials for network authentication Yes Block period Not Configured Auto configuration logic is enabled on interface quot Wi-Fi quot SHOW FILTERS Allow list on the system Can't connect to this network (wifi problems) group policy --------------------------------------- lt None gt Allow list on the system user ------------------------------- lt None gt Block list on the system group policy --------------------------------------- lt None gt Block list on the Can't connect to this network (wifi problems) system user ------------------------------- lt None gt SHOW CREATEALLUSER Everyone is allowed to create all user profiles SHOW PROFILES Profiles on interface Wi-Fi Group policy profiles read only --------------------------------- lt None gt User profiles ------------- All User Profile Yasser - All User Profile UnConstitutional SHOW PROFILES NAME Profile Yasser - on interface Wi-Fi Applied All User Profile Profile information ------------------- Version Type Wireless LAN Name Yasser - Control options Connection mode Connect manually Network broadcast Connect only if this network is broadcasting AutoSwitch Do not switch to other networks Connectivity settings --------------------- Number of SSIDs SSID name quot Yasser - quot Network type Infrastructure Radio type Any Radio Type Vendor extension Not present Security settings ----------------- Authentication Open Cipher None Security key Absent Key Index Cost settings ------------- Cost Unrestricted Congested No Approaching Data Limit No Over Data Limit No Roaming No Cost Source Default Profile UnConstitutional on interface Wi-Fi Applied All User Profile Profile information ------------------- Version Type Wireless LAN Name UnConstitutional Control options Connection mode Connect automatically Network broadcast Connect only if this network is broadcasting AutoSwitch Do not switch to other networks Connectivity settings --------------------- Number of SSIDs SSID name quot UnConstitutional quot Network type Infrastructure Radio type Any Radio Type Vendor extension Not present Security settings ----------------- Authentication WPA-Personal Cipher TKIP Security key Present Cost settings ------------- Cost Unrestricted Congested No Approaching Data Limit No Over Data Limit No Roaming No Cost Source Default SHOW NETWORKS MODE BSSID Interface name Wi-Fi There are networks currently visible SSID SAMATY Network type Infrastructure Authentication WPA-Personal Encrypt... Read more

http://www.eightforums.com/network-sharing/55635-cant-connect-network-wifi-problems.html
Relevancy 61.06%

I have two computers: a desktop with no WiFi (Ethernet only) and a laptop (Ethernet and WiFi).

Using Ethernet on both computers I am able to see and share files both ways and all works perfectly. Using WiFi on the laptop I can connect with the desktop machine but not the other way around.

The diagnostics on the desktop computer report "One or more network protocols are missing on this computer. Windows Sockets registry entries required for network connectivity are missing." I've tried all the standard methods to resolve this issue but nothing works. In any case, surely if this were the problem I wouldn't be able to use the Ethernet connection and the laptop wouldn't see my desktop machine?

Disabling the Kaspersky antivirus/firewall makes no difference.

At wit's end! Can anybody help?

http://www.tenforums.com/network-sharing/46721-cannot-connect-network-computer-via-wifi.html
Relevancy 61.06%

Few months back i have upgraded my laptop to windows 10 (64 bit Home Edition) from windows 8.1.Now my WIFI is not getting connected (Error : Can't connect to the network). Tried all google options like upgrading the network adaptor, running commands to reset tcp/ip socket, still no go. Just I remembered, i got some anniversary update pushed to my system as well. Can you please help me to get my WIFI backup and running? Wifi Network Adaptor Model : Ralink RT3290  

A:WIFI Issues - Can't Connect to Network

Hi. Please try:          http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_150624_1 Regards.

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/WIFI-Issues-Can-t-Connect-to-Network/td-p/5849356
Relevancy 61.06%

hey guys, new here. been having this problem for over a month now, I think it happened when i switched from windows 8 to windows 8.1.

Try connecting to wifi network, it takes a long time and finally I get a "can't connect to this network"

I have extensively used google with no luck. I have no problem connecting at home, but at work it is now impossible.

Again, I'm new to this forum, if I am missing some information for you guys I appologize in advance and will post what you guys need.

thanks,
Paul

A:Can't connect to this network (wifi problems)

Hi Glock,
Please copy & paste the following into notepad.
Code:
netsh wlan show all >%userprofile%\Desktop\Network.txt
sc query dhcp >>%userprofile%\Desktop\Network.txt
sc query dnscache >>%userprofile%\Desktop\Network.txt
sc query wlansvc >>%userprofile%\Desktop\Network.txt
ipconfig /all >>%userprofile%\Desktop\Network.txt
netsh advfirewall show global >>%userprofile%\Desktop\Network.txt
netsh winhttp show proxy >>%userprofile%\Desktop\Network.txt
Save the file as "Network.bat"Right click the file and select Run as Administrator.This will create a file called "Network.txt" on the desktop.Copy & paste the contents into your next post.

http://www.eightforums.com/network-sharing/37975-cant-connect-network-wifi-problems.html
Relevancy 61.06%

My laptop is unable to connect to my home wifi network after it had ip conflict last night. I tried network troubleshooting it and it always ask me to investigate the router. I tried to reset the modem a few times but my laptop still could not connect to it while my roommates and my phone could. Then I remove my wifi profile and attempt to connect back to the network. However, the same problem persist.My laptop model is Asus A43S and having Windows 7 Home Premium Service Pack 1. Anyone who can help me on this? I'm currently using my roommate's laptop for Internet. Thanks
 

Relevancy 60.63%

I have Windows 7 64bit, a Belkin router, and a Wifi usb card.

I have a Windows Xp computer networked and shared on the router.

I get my internet from the Wifi usb card.
I would like to use the internet off the wifi card, but also still connect to my network and get files from the XP computer.

(I would like to have the connections separate. One for Internet over Wifi. Lan for sharing files over home network.)

I have the two connections working just fine. and i can get internet...
But...

The LAN is a "public network" and I cant change it to a home network.
and i cant see the Xp computer or its files.
I would be grateful for any help.

A:LAN Home Network with router + Wifi internet

  
Quote: Originally Posted by tcables


I have Windows 7 64bit, a Belkin router, and a Wifi usb card.

I have a Windows Xp computer networked and shared on the router.

I get my internet from the Wifi usb card.


I would like to use the internet off the wifi card, but also still connect to my network and get files from the XP computer.

(I would like to have the connections separate. One for Internet over Wifi. Lan for sharing files over home network.)

I have the two connections working just fine. and i can get internet...
But...

The LAN is a "public network" and I cant change it to a home network.
and i cant see the Xp computer or its files.


I would be grateful for any help.


Ok, your W7 machine is using the USB wifi, and your XP is using the home wifi (ie through your router). I cannot see why your W7 can't use both the USB wifi AND router wifi. Matter of fact it should work from connections point of view. I tried it on my eeepc, with a USB modem attached.

If you are just sharing files from your W7 and Xp, you don't need to be on the internet. That said if both machine can see each other, everything you wanted should be fine. Just create shared folder to be shared between the machines, and surf the net from either. However why do u want to use the USB wifi for internet when you can use your router's?

http://www.sevenforums.com/network-sharing/54688-lan-home-network-router-wifi-internet.html
Relevancy 60.2%

I am unable to get my laptop to connect to the internet when my wifi network has any type of security option or authentication selected. i want to password protect my network and it shows that the network name and passphrase i selected are correct on the router setup page. I can connect to wifi just fine when there is no authentication set on the network, but when I change it to WPA2 or WEP or any type of security on the router setup page, my laptop is able to find the network and connect with local only access. it gives me the option to reset the network adapter or generate a new ip address, but the problem still persists, and the connection only works when there is no password. is it my laptop or the router that is the problem. it has worked previously with a different router with password security.
 

A:laptop won't connect to wifi when network is protected

can we have the wireless adapter make and model - will be in ipconfig /all

Post an ipconfig /all

also have a read about a particular issue we are seing on vista with an AR5007 type adapter - which may apply if its the same adapter and you are on vista

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Atheros Wireless Adapter - AR5007EG & AR5007
We have recently been seeing a lot of problems with the above adapter over the last few months, mainly concerning WPA and WPA2 encryption and windows Vista.

The adapter gets an IP configuration, and shows as connected, but communication is non-existent or sporadic.

Log into the Router and disable the wireless security and see if you are now able to connect to the internet and surf OK.
--- Please post back here if that works or does not work.

Here are a number of possible solutions

--- 1) In Device Manager right click on the wireless adapter and "update driver." That apparently has worked for some posters.

--- 2) Download and install the latest wireless driver from your laptop manufacturer's web site support section, as some manufactures, appear to now have a working driver available.
Toshiba - update has worked for some PCs
HP The latest HP Atheros driver dated Sept 2010 has fixed the issue - so check the driver date, However, that does NOT apply to all HPs / Compaqs machines
- the poster did an online scan for driver updates on the HP website here HP Product Detection which resulted in a solution. Solved: Can't connect to internet wirelessly - Atheros AR5007 Wifi through Clear Comm - Tech Support Guy Forums

If you can post the Make and EXACT model of your PC here, along with the windows version you have and we will see if we can find the driver and will post a link as a reply here.

--- 3) On one occasion re-setting the router back to factory default and re-configuring the router settings has resolved the issue

--- 4) A few posters here with the same issue have found that the driver from this site ATHEROS drivers for Microsoft Windows resolved the issue
Threads are here
Solved: Public Network - Access: Local Only (Please help!) - Tech Support Guy Forums
Solved: NetGear WNDR3700 Incompatibilty W/ Atheros AR5700 - Tech Support Guy Forums
Solved: Local connection only when connected to secured wirless - Tech Support Guy Forums
Solved: Unidentified Network - Tech Support Guy Forums
Unidentified Network
I do NOT know anything about the site mentioned ATHEROS drivers for Microsoft Windows However, a number of forum members have now successfully used the site to update the driver

However, if you do decide to try the driver, Please let us know the outcome

Direct link to the drivers are below
You only need to click on the ... Read more

https://forums.techguy.org/threads/laptop-wont-connect-to-wifi-when-network-is-protected.992938/
Relevancy 60.2%

I have a new iPhone 4Gs. at work I noticed under available networks that there is one labeled 'Free Public WiFi' but when i try to access this i get no where. no error messages come up or request for password. Mainly I'm trying to use this wifi for FaceTime connect with the iphone. I am told that others try to access this network and can't get to the internet either.
What could be the problem? the strength is about 50% but even when I walk to an area that is supposedly FULL strength signal it won't work then either. the DHCP address is:169.254.106.123 subnet mask: 255.255.0.0
 

A:trying to connect to wireless WiFi network at work

Well, you most likely answered your own question. Others that try to connect can't either. I'd suggest that maybe that free public WiFi isn't working.
 

https://forums.techguy.org/threads/trying-to-connect-to-wireless-wifi-network-at-work.932015/
Relevancy 60.2%

I changed fro windstream to time warner cable, and i cannot connect to the new wifi. I have tried everthing i get or know .how do i do a factory reset , ect ecdt

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/cannot-connect-C4780-printer-to-new-wifi-network/td-p/5775248
Relevancy 60.2%

i've had a wifi network set up at my house for several months now and no problems if i couldn't connect i always just unplugged the router for seconds and was able to connect well suddenly today i can't connect to the internet but my wifi network appears to be fine it's says i have excellent signal strengh and that i'm connected but i can't connect to the internet when i go to the program that came with the router and hit quot repair quot it says that i AM connected to the network but that my internet connection is broken what UP with that i don't get it can someone please advise on what to do i tried using connected can't to internet..??? connect but network, to wifi another device to see if i could connect with internet my ipod touch and it also said that i was connected to the wifi network yet it could not connect with the internet it never had a popup that said anything it acted like it was trying to connect but just never did i'm puzzled during the day while i was at work my roommate connected to wifi network, but can't connect to internet..??? was going to use the laptop when she couldn't connect she did the unplug for sec thing whent that didn't work she unplugged the two cables from the back of the router and plugged them back in is it possible that she plugged them into the wrong place would that be the problem i am not at home right connected to wifi network, but can't connect to internet..??? now so i can't check but will try to fix this when i get home tomorrow not sure what i need to do signed frustrated

A:connected to wifi network, but can't connect to internet..???

Willing to bet you are using a third party firewall / antivirus application.
Which one is it?

http://www.sevenforums.com/network-sharing/153584-connected-wifi-network-but-cant-connect-internet.html
Relevancy 60.2%

I recently did a clean install of Windows 7 on my mini because the Windows 10 upgrade left it basically unusable. I've successfully installed windows 7 professional on it however I'm unable to connect to my wifi to do any updates. Under the device manager it says I am missing a network controller and a video controller. I was able to find a network adapter (Realtek PCI FE Family Controller) but I need help locating the others. I've tried to look up available drivers under my product on the HP website but it only had something Windows 10 specific. Device Instance path:Network controller: PCI\VEN_14E4&DEV_4727&SUBSYS_145C103C&REV_01\4&EDE306C&0&00E0 Video Controller: PCI\VEN_8086&DEV_A012&SUBSYS_1584103C&REV_00\3&21436425&0&11 Thank you for any assistance!











Solved!
View Solution.

A:Cannot connect to wifi, network driver missing

Hi: You need these drivers... Network controller: This package contains drivers for the supported Broadcom Wireless LAN Adapters in the supported notebook/laptop models and operating systems. File name: sp57965.exe Video Controller:  You posted you are running W7 64 bit, but your notebook came with W7 32 bit. You would need to use the 64 bit graphics driver directly from Intel for the 64 bit version.  2nd one on the list. Note:  I think the Intel driver site is messed up because when I click on the link to get to the driver, nothing happens, and this has happened to me twice today. You may have to wait until after the 4th of July holiday to get the driver if you have the same issue. http://www.intel.com/content/www/us/en/support/graphics-drivers/intel-graphics-media-accelerator-3150-intel-gma-3150.html

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Cannot-connect-to-wifi-network-driver-missing/td-p/5677927
Relevancy 60.2%

Hi,

I tired to allow my windows 7 laptop to print over the network, and after 3 hours gave up as nothing seemed to work. I must have done something because now i can not connect to WI FI at all or Ethernet.

It says on the system tray Not connected and below that connections available, and under wireless network connection it says it is connected to my wireless connection but i can not connect.

Please any help would be good, i have no Home group with, not sure if this is something i did, it's all a blur to me.

Any suggestions would be helpful.

A:Cannot not connect to WIFI or ethernet after trying to config network.

Have you tried plugging in an ethernet cable to your router directly to see if you connect?
Have you factory reset or power cycled your modem?
What configs did you change if any? Do you remember?

On my laptops...if it shows connections available but unable to connect resetting the modem usually fixes it up

http://www.sevenforums.com/network-sharing/250099-cannot-not-connect-wifi-ethernet-after-trying-config-network.html
Relevancy 60.2%

hello, im running 64 bit on a dell studio 1555 and i setup an ad-hoc network to use my computer as a temporary router. After setting this up and using it for a day i'm unable to connect to any router. I've since deleted the connection and tried restarting my network adapter and rooting around to find anything out of place but can't. any help would be appreciated!

A:Can't connect to wifi after creating adhoc network

I can also add that it does connect to routers, but as local only, and always shows up as unidentified.

http://www.vistax64.com/network-sharing/292142-cant-connect-wifi-after-creating-adhoc-network.html
Relevancy 60.2%

Every time I try to connect to our WiFi, it cannot get an IP address. Even using a static IP address still yields a limited connection. I have tried a Google search and everything isn't working. I have a feeling it is an issue related to the router but not sure what to check :/

Thanks guys!

Also, I'm very good with computers and such so I'm able to try anything.

A:[SOLVED] Windows 8.1 Cannot connect to WiFi network

Have you tried to reset the router to factory settings?

http://www.techsupportforum.com/forums/f31/solved-windows-8-1-cannot-connect-to-wifi-network-887081.html
Relevancy 60.2%

Hello new to the forum and relatively devices can. One to Other laptop network. cannot connect WIFI tech-newb One laptop cannot connect to WIFI network. Other devices can. I got a new DSL connection in my apartment today Router was set up fine and most devices are working my iPhone my friend's laptop and my old laptop However I can't seem to connect to WIFI with my primary laptop Windows One laptop cannot connect to WIFI network. Other devices can. I have tried uninstalling and reinstalling the network drivers I tried turning off the router and turning on again I also tried resetting the TCP IP stack with netsh int ip reset c resetlog txt and restarting Not entirely sure what that does but I read it somewhere No improvement I can provide two ipconfig logs The first one is from my old laptop which is successfully connected to the WIFI network --- Microsoft Windows XP Version copy Copyright - Microsoft Corp C Documents and Settings Lenovo gt ipconfig allWindows IP Configuration Host Name Paudical Primary Dns Suffix Node Type Broadcast IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List localdomainEthernet adapter Local Area Connection Media State Media disconnected Description Intel reg PRO PL Network Connection Physical Address - - - B- F-DDEthernet adapter Local Area Connection Media State Media disconnected Description TAP-Win Adapter V Physical Address -FF- -DF-D -BFEthernet adapter Wireless Network Connection Connection-specific DNS Suffix localdomain Description a b g Wireless LAN Mini PCI Express Adapter Physical Address - -CF- C-F - Dhcp Enabled Yes Autoconfiguration Enabled Yes IP Address Subnet Mask Default Gateway DHCP Server DNS Servers Lease Obtained October Lease Expires October C Documents and Settings Lenovo gt ---- The second is from my primary laptop which will not connect --- Microsoft Windows Version Copyright copy Microsoft Corporation All rights reserved C Users Intel gt ipconfig all Windows IP Configuration Host Name Intel-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description n Wireless LAN Card Physical Address - - - -B - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d ab a d Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - C- - - - - - - -B - DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description TAP-Windows Adapter V Physical Address -FF-BF-F -DB- E DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe GBE Family Controller Physical Address BC-EE- B- A- - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - - -B - DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap FE - E - CE- - A B CB C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BC B -DBAA- EB - D- D EFB D Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C Users Intel gt --- I can see that there is differences there with the IP address etc I'm just not sure what to do with that informati... Read more

A:One laptop cannot connect to WIFI network. Other devices can.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

http://www.bleepingcomputer.com/forums/t/593594/one-laptop-cannot-connect-to-wifi-network-other-devices-can/
Relevancy 60.2%

last day I resize the wifi in to network laptop my connect unable c partition boot partition today I try to connect wifi network but my laptop not show my wifi network via windows phone network sharing I shows all my problem in above picture I search in unable to connect wifi network in my laptop internet and find one solution that is quot only chance to upgrade os to solve quot please visit link - I receive Error code x whenever I try to use the - Microsoft Community what I unable to connect wifi network in my laptop do I not have any upgrade os dvd so l planned to download Windows Embedded Industry Pro in https www dreamspark com Product P x productid and burn in DVD My question is that DVD helps to upgrade my Windows home basic to Windows Embedded If yes how to upgrade If that DVD not helps to upgrade my os I planned to dual boot win and embedded win my question is after dual boot In windows I able to connect Wi-Fi say your solution for my problem I try sfc scannow I get following result what I do next

A:unable to connect wifi network in my laptop

For the fastest repair option, you could do a repair install.

Repair Install

You do not need to upgrade your OS to fix the issue.

When did this start happening?

Install any hardware or software recently?

http://www.sevenforums.com/network-sharing/333446-unable-connect-wifi-network-my-laptop.html
Relevancy 60.2%

hi
i have a lenovo flex 2-15 and installed on win8.1 x64.
download wifi driver from lenovo website (realtek rtl8723be wireless lan 802.11n pci-e nic)
But not identify any network.
i try it with win 7 x64 and other version of driver (2013,2014,2015) and even use from Driver Pack Solution software (v15.5).
also Uncheck" Allow the computer to turn off this device to save power" on "power management".
please help me !!!!!!!!

A:Lenovo flex 2-15- can't connect to any wifi network

As long as it is the correct driver, WiFi is turned on, then you should be seeing SSID's available.

http://www.eightforums.com/network-sharing/66075-lenovo-flex-2-15-cant-connect-any-wifi-network.html
Relevancy 60.2%

Hey guys i m having similar troubles here friends laptop is unable to connect to a network through wifi it will connect to internet but only through cable hookup i network to to wifi through a is connect laptop unable can locate my network but when laptop is unable to connect to a network through wifi i hit connect type in correct password it tries for say - seconds then says quot Windows was unable to connect to my network quot i know its not my router i have several things that can connect to my network without problems only this laptop seems to have a problem she has a ralink wifi adapter which is said to be notorious for going bad but i can neither conform or denai that i ll list what specs i know how to find and hopefully that will help any help from you all would be great also if you need me to post some data could you explain how to find it and the like thanks Specs Windows home premium service pack HP pavilion g notebook AMD A - M APU with radeon hd graphics GHz GB GB usuable RAM -bit operating system Network Adapter Microsoft virtual wifi miniport adapter Ralink RT b g n wifi adapter let me know what you think please nbsp

Relevancy 60.2%

Hi Here is the story of my long struggle with this except wireless all at connect Cannot to work network wifi issue I have a Lenovo T and installed Windows little over two months ago After the upgrade I started having trouble connecting to different wireless networks ATT Uverse at home Verizon Jetpack LE Verizon Pantech UML and wifi networks at Starbucks I can see the SSID but when I try to connect it it says quot verifying and connecting quot and errors out All these wireless networks work perfectly Cannot connect to all wireless network except wifi at work ok with rest of my devices Windows laptops MacBook Air Pro Tablets etc However my windows laptop is able to connect to the two wireless network Cannot connect to all wireless network except wifi at work at work one is Cannot connect to all wireless network except wifi at work internal and one public wifi for guests The only difference is our corporate wifi uses Radius servers for authentication where as rest of the wireless networks don't Here's what I have done troubleshooting this issue so far Completely wiped the drive and reinstall the OS Tried connecting to the wireless network with the default drivers and the same issue happened Downloaded the latest drives for the Intel Centrino Ultimate-N AGN from Intel's website and tried connecting to the wireless network Same error again Called Verizon to see if there was a problem on their end Reset the two Verizon G cards to factory settings updated firmware's and tried connecting Same error Called ATT and same steps and no luck Changed Wireless Authentication Type from quot WPA quot to quot WPA quot quot WEP quot and tried connecting Same thing again Disabled Wireless security Same error Renamed SSID Opened a support ticket with Microsoft and took Netmon logs once while connecting to problematic wireless network and once while connecting to wifi at work which works And one more netmon log from Windows Laptop connecting to the same wireless that has problems connecting on Windows laptop Compared the logs and all we found was there was no attempt packet transfer while connecting from Win device where as Win device shows Beacon response The log files in quot C Windows tracing quot on Win device do not get updated when I try to connect to the wireless network that I have problem connecting to Called Lenovo and replaced the Wireless NIC and still have the same problem After all these troubleshooting I have absolutely no clue what the issue and what I am supposed to do to troubleshoot this issue Please help if you have any suggestions

A:Cannot connect to all wireless network except wifi at work

FIPS enabled in 802.11 advanced settings?

http://www.eightforums.com/network-sharing/28274-cannot-connect-all-wireless-network-except-wifi-work.html
Relevancy 60.2%

Hi all I have a home network set up sharing the broadband connection successfully throughout the house via a Linksys broadband router We have four laptops and two desk based machines and each can connect to the internet without issue On one of the desk based PCs I have a Laserjet HL D connected and shared The PC it is connected to runs XP Home SP edition I can connect and print to this printer from all machines except my wife s new Sony Vaio laptop When I try to add a network printer and browse the windows network it simply doesn t find it at all Whereas I am on my dell 1 printer PC on cannot home out connect to wifi network 4 of my laptop and can search and locate the printer without issue The Sony Vaio can connect to the net without issue is only a few months old and is running running XP Home SP my Dell is running XP Pro SP Is there anything I might be missing here that an expert could advise on please Thanks 1 PC out of 4 cannot connect to printer on my wifi home network all nbsp

Relevancy 60.2%

This option for me is getting unchecked after sometime, after enabling it from Ethernet properties.

"Allow other network users to connect through this internet connection"

As a result am unable to start WiFi hotspot. I'd be really grateful if someone could help me solve this.
 

https://forums.techguy.org/threads/allow-other-network-users-to-connect-wifi-hotspot.1159878/
Relevancy 60.2%

I m running Windows Vista Home Premium and I can connect to a network but not the router I tried to access but Firefox tells me that the connect times out I ran an ipconfig all and here are the results minus some sensitive information Code Windows IP Configuration cannot network, to the router but I connect connect can to a Host Name MYNAME-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List Lastname Wireless LAN adapter Wireless Network I can connect to a network, but cannot connect to the router Connection Connection-specific DNS Suffix Lastname Description Broadcom b g WLAN Physical Address - A- -BD- I can connect to a network, but cannot connect to the router - B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address sensitive Preferred IPv Address Preferred Subnet Mask Lease Obtained Sunday June PM Lease Expires Thursday July PM Default Gateway DHCP Server DNS Servers sensitive sensitive sensitve NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek RTL x Family Fast Etherne NIC Physical Address - B- - -F - E DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap E BB- E - -A EC-E D F A Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Lastname Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - E- DHCP Enabled No Autoconfiguration Enabled Yes IPv Address sensitive Pre erred Link-local IPv Address sensitive Preferred Default Gateway NetBIOS over Tcpip Disabled On other computers connected to the network I can access perfectly fine Does anyone know what the problem is nbsp

Relevancy 59.77%

Hi.

I can connect to the router if I use wired LAN.

But if I want to connect to the router via a USB network stick,
I cannot connect.

The conection refuse when I enter the password for the router.

Wha can be the reason ?

A:USB network cannot connect to router

double check your network configuration settings on the router and on your pc. something in there might not be set correctly.

http://www.sevenforums.com/network-sharing/188583-usb-network-cannot-connect-router.html
Relevancy 59.77%

Hi there,

I work in a small office and use a laptop with Windows 7. We use the same router and have wired internet. His computer is connected to a "Network 4" while mine is connected to the private wireless internet system we've set up. He can't connect to any other connections on his computer while all the other connections around our office is visible on my laptop. What can I do to get my boss on my network so we can share files? Thank you!

A:How to connect to same network on one router

Network 4 is just the name given to the network connection on his computer. It is the same network the rest of you connect to.

Do this on your system and on his. Post results for both:






Quote:
Click on Start then Run or press Window key (next to left Ctrl key) +R and paste the following into the Run box, exactly as shown, including double quotes:

cmd /c "ipconfig /all > postme.txt & ping yahoo.com >> postme.txt & notepad postme.txt & del postme.txt"

and press ENTER.

A file will open in Notepad. Please copy and paste the contents here. Close the Notepad window and the file will be deleted and the Command Prompt window will also close.

If you don't have a Run selection off the Start menu, see here: Enable Run Command on Windows 7 or Vista Start Menu

http://www.sevenforums.com/network-sharing/242734-how-connect-same-network-one-router.html
Relevancy 59.77%

When i go throw all the steps it is fine right up till it ask for my password when I give it and click ok it try to connect and then give me error message
help please
 

A:Can`t connect Nintendo Wii to wireless network with SBG6580 wifi

What does the error message say?
 

https://forums.techguy.org/threads/can-t-connect-nintendo-wii-to-wireless-network-with-sbg6580-wifi.1075623/
Relevancy 59.77%

lost wifi access thru local home connection can connect thru public network my grandma during last visit accidentally changed the network to her laptop Have tried to reset netgear wnr v with pin in back turned off and waited and turned back on again--no success have tried to set up new network--see the network listed but no internet access available have modem router from comcast My laptop is Acer Aspire with Lan Broadcom and wireless lan atheros Hope that helps gettting discouraged have looked on your other threads posts for suggestions-have tried many so far no help have used your website in past and has always helped esp since I m not very computer savvy How can I get my wifi connected again Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users Vicatron gt PING PING is not recognized as an internal or external command operable program or batch file network connect Solved: local/home cant wifi to C Users Vicatron gt Ping google com Pinging google com with bytes of data Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Reply from bytes time ms TTL Ping Solved: wifi cant connect to local/home network statistics for Packets Sent Received Lost loss Approximate round trip times in milli-seconds Minimum ms Maximum ms Average ms C Users Vicatron gt nbsp

Relevancy 59.77%

We had FIOS installed on Monday and though all our regular devices connected just fine to it my HP CP nw Color Wifi Laser printer will not I have connect to new printer network Cannot FIOS Verizon wifi the M WR Rev I ActionTec router from Verizon Have run the HP setup utility for the printer numerous times and it only completed the first time But after entering my credentials for the new Cannot connect wifi printer to new Verizon FIOS network network it failed on me And ever since then I cannot get it Cannot connect wifi printer to new Verizon FIOS network to complete the setup It fails on me every time In order to run the setup for wifi I connect a USB cable from my printer to my XPS But no matter it doesn t work Also tried connecting an Ethernet cable from the printer to one of the ports on the router but nothing happened Also looked at my router settings but could see no place to update anything related to the printer So I turn to the tech support guy site because after scouring manuals and HP forums I am no closer to figuring this out and right now my printer is an expensive paperweight Yeah I guess that I could use the USB connection but that doesn t seem to work either All I know is that the printer is giving me a xx address which is not on my subnet It needs to be something Any help is greatly appreciated Tech Support Guy System Info Utility version OS Version Microsoft Windows Ultimate Service Pack bit Processor Intel R Core TM i - QM CPU GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GT M - Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB Motherboard Dell Inc RG Antivirus Norton Updated and Enabled nbsp

A:Cannot connect wifi printer to new Verizon FIOS network

The printer is successfully connecting to the router via neither Wi-Fi nor ethernet and is not connecting successfully to a computer via USB. The common element here seems to be the printer. Suggest you try resetting it to factory defaults and see if that helps.
 

https://forums.techguy.org/threads/cannot-connect-wifi-printer-to-new-verizon-fios-network.1106169/
Relevancy 59.77%

Hi all,

I followed this tutorial, and after playing around with it for a couple of days, decided to remove the ad-hoc network through the manage networks window. After removing it, I have been unable to connect to any wireless networks, I've tried deleting the profile and creating a new one, reinstalling the driver, updating the driver, nothing seems to work. I really really do not want to do a reinstall, and I was hoping you guys could help me get my wireless back up and running. Right now I'm using wired, which will work for a while, but I'd still prefer to get wireless working, since my wired isn't in the most convenient location.....I have an Intel WiFi Link 1000 BGN adapter on my ASUS UL20A-A1 laptop.

Thanks for the help !

-McDougal

A:WiFi doesn't connect after creating/deleting an ad-hoc network

Try running this batch file which will reset winsock, reset the TCP/IP stack and release renew your IP.

If this doesn't get it working then please post a screen shot of your ipconfig /all .



Download Renew IP + Reset Winsock Batch File

http://www.sevenforums.com/network-sharing/119911-wifi-doesnt-connect-after-creating-deleting-ad-hoc-network.html