I know this is an older laptop, but with the "Realtek PCIe GBE family" controller, I can see in Windows 10 that WOL is supported by this controller. In the BIOS however (firmware version F.66), there isn't a clear "Enable WOL" option. Does my notebook support WOL?http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Enable-WOL-on-HP-Pavilion-G6-1210tx-in-BIOS/td-p/5632083
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Hello. I am trying to install 64-bit version of Ubuntu through Virtual Box, however, VT-X is required for the 64-bit support. Reading the documentation, it seems that the processor supports the VT-X, however, I can't find the option in the BIOS to enable this feature. How can I enable it the other way? Or is there an update to a BIOS that has this feature as an option?
Hello @laptopnerdy?, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I read your post about the Virtualization Technology, and wanted to assist you! You should be able to find the option in your BIOS, under the Power tab. If you can not find it, then try updating your BIOS. You can find drivers for your product here:Drivers - HP Pavilion dv7-5090ef Entertainment Notebook PC Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution" , this will help others easily find the information they may be looking for. Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/How-to-enable-VT-X-in-HP-Pavilion-dv7-5090ef/td-p/5381076
Hai, my product is hp pavilion g6 2320tx and im using windows 7 os in, the problem is that am not able to enable 2 usb ports out of 3(one port woking normally but remaining two are not detecting any usb devices..) pls guide me so that i can solve this problem thank u in advance
Hi: You need to install the usb 3 controller driver. http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118604_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetokenhttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-pavilion-g6-cant-enable-usb-ports/td-p/3639940
how can i enable my bluetooth(pavilion dm1)
how can i enable my bluetooth.pavilion dm1?i want to use bluetooth speaker pls help me..thankshttp://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/how-can-i-enable-my-bluetooth-pavilion-dm1/td-p/1134213
How can i enable my virtualization in hp pavilion dv4-1503TU please help..., because i want to run a 64-bit OS in my virtualbox ...thanks in advance...
Hi @USSB,Thanks for becoming a member of the HP Support Forums. I understand you have questions about hot to turn on virtualization. I will be glad to help you. I'm not sure if this computer has that option as I do not have one to work with. If it can, boot into the bios.Select security.There will be either system security or virtualization technology.Change to enable. Hope this helps you. please keep me informed.If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below! Thanks.http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/How-can-i-enable-my-virtualization-in-hp-pavilion-dv4-1503TU/td-p/5692306
Can I enable bluetooth connections on this laptop, and if so, how do I do it? I would like to connect to a bluetooth external speaker. Any help would be appreciated. Thanks.
Hi, Sorry, it does not have builtin Bluetooth in the first place as shown: http://support.hp.com/us-en/document/c04092019 Option: You can use USB-BT dongle, which is similar to the following one http://www.officeworks.com.au/shop/officeworks/p/targus-bluetooth-4-0-usb-adaptor-taacb75au Regards.http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/How-to-enable-bluetooth-on-my-Pavilion-laptop-17-e137cl/td-p/5854667
I upgraded froom Windows7 to Windows 10 without a problem, but now my Security software that protects against screenprints indicates that the virtualization needs to be enabled. It currently shows as disabled. How can I change it?
You can enable virtualization in the BIOS Configuration.Restart your computer and press "esc" or "f12" (not sure which one) to access to the BIOS. Then on advanced options you may find the Virtualization preferences.http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Enable-Virtualization-on-Pavilion-g7-after-update-to/td-p/5598239
Hi all, sorry if is somewhat of a redundant question. This is a : Pavilion 15-p043cl NotebookRunning : Windows 10 64Bit Home (Upgrade)BIOS: F.43I need to encrypt this laptop with Veracrypt which doesn't support GPT. I am trying to find a way to change my laptop to AHCI mode so that I can do the change once I convert the Disk Volume to MBR. I don't see that option in the BIOS. Questions: 1. Is there a way to change the bootloader settings to AHCI?2. If yes, how or will it automatically switch if I just change the volume from GDP to MBR? Or sould I just forget it and upgrade to windows 10 pro and use bitlocker? Thanks in advanced for taking the time to reply.DMhttp://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Enable-AHCI-in-HP-Pavilion-15-p043cl-Notebook/td-p/5797630
Hello ,I have downloaded Android Studio and the emulator doesnt run due to Intel Vt-x hardware accelerator is disabled from BIOS. I also have downloaded the "Intel processor identifications Utility"and checked that processor supports Hardware acceleration . But when I am going into BIOS I am getting Vt-x hardware Acceleration is unchecked and not editable (not allow me to check it) . Also I am not finding Hyper-v from controlpanel->programme & feature. How do I enable Vt-x ? Regards,Debabrata Note:My processor is : Intel Core i5http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Cant-Enable-VT-x-from-Bios/td-p/5766048
I need to enable PnP on a friends computer but am unable to make any changes in the bios. I can get into them just can't make changes. They are protected by a supervisor password. Anyway to get around this?
It was given to him by another friend that picked it up at a garage sale.
Asus sp97-v MB
Hi, Can someone tell me how do i enable virtualization in bios on my Phoenix 860-000. When i access the bios configuration there is no option to set the state of Intel VT Tecnology.
Hi, Looking at the bios simulator for your PC, the option should be located under the Security tab.....System Security. Regards, DP-Khttp://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/How-do-you-enable-Virtualization-in-Bios/td-p/5585869
I recently purchased an asus f5gl laptop running vista OS and just now have needed to use bluetooth, but have found out that it has been disabled in system information. i would like to know how to enable bluetooth in BIOS or where ever i can?
does anybody have any ideas, any help is greatly appreciated.
please do not start new posts for the same problem
this thread now closed
My apologies if this has been dealt with enable BIOS USB won't Award in before I ve spent days trying to get a Belkin F U USB Port USB card to work in conjunction with Windows se Processor Model AMD-K tm D processor Speed MHz Performance Rating PR estimated Type Standard Mainboard Bus es ISA AGP PCI USB i c SMBus MP Support No MP APIC No System BIOS Award Software International Inc PG System System Manufacturer Product Name Mainboard First International Computer Inc VA- Chipset Model VIA Technologies Inc VT C AT MVP Apollo USB won't enable in Award BIOS VP MVP System Controller L External Cache kB Pipeline-Burst Write-Thru Front Side Bus Speed x MHz MHz data rate Total Memory MB SDRAM Memory USB won't enable in Award BIOS Bus Speed x MHz MHz data rate Windows froze on the first attempt to install After a lot of online research I found that this was a clock mismatch problem and I got it to install USB won't enable in Award BIOS after downloading a fix which was supposed to be unnecessary with se I took every reference I could find to USB out of Device Manager took the card out manually restarted shut down put the card back in started up and it installed normally The USB OPTi C PCI to USB Open Host Controller and USB Root Hub are now showing normal in Universal Serial Bus Controllers in the Device Manager No yellow exclamation marks are anywhere in the Device Manager The Award Bios shows USB Controller Disabled in Integrated Peripherals and there is no other option - I expected to be able to toggle between enabled and disabled but it won t Also disabled are various IDE options and one HDD just above the reference to the USB I tried to get a BIOS update from Award and after initially telling me we have just the thing for you boy are you going to be a happy bunny or something very similar they wrote and said we ve taken the money from your credit card but you already have the latest BIOS - or something even more similar Belkin refer me to everybody else except them Should I quit now while I m ahead The floppy disk drive is still working after all nbsp
Normally, your USB BIOS would only be required to allow BOOTing a USB HD.
Your Belkin USB is not accessed at BOOT time, so stop fussing with BIOS.
If you have modem-->router setup, then the drivers are not required at all!
Use the Modem->Router using Ethernet cable and from the router->pcs as well.
Otherwise, modem-->pc(USB connected) requires a driver.
Does this clarify/help?
When I try to download Android Studios this pops up:
So when I went to the BIOS to enable it, there was no setting there for it. I am running Windows 10 on my Acer Aspire 5755G - 6823 with an Intel i5 - 2430M @2.4GHz. I even downloaded the Intel(R) Processor Identification Utility app and it says that it's supported on my device. Any help would be much appreciated! Thanks in advance!
It's possible it has some other name on your BIOS, like "Virtualization Technology" or "Intel Virtualization Feature". It's usually under the CPU or maybe even Motherboard settings.http://www.tenforums.com/virtualization/36281-cant-find-where-enable-vt-x-bios.html
I use Lenovo Ideapad Z470
Can you guys show me the way to enable wireless at BIOS?
Ngoctraiden9x, welcome to the windows 7 forum.
The bios is where the hardware is turned on/off/configured in most cases. For your computer to use the wireless, you have to have the hardware drivers installed and the software to control the wireless adapter.
Normally, when you turn your machine on the bios recognizes your hardware devices and then as your Operating system loads, it load all the drivers for your devices and at that time your wireless would become active.
Is this what you meant when you said enable wireless at bios?
Some bios screens will allow you to turn on and off devices. If this is what you mean, then by entering bios, go thru the screens and look for the wireless. Some machines have a physical wireless switch or a function key toggle.
I've bought a Toshiba Qosmio G50-12F 3 or 4 years ago. This computer has an Intel Core 2 Duo P7450 and is compatible with virtualization. I want enable it, but is there any option to do this in my BIOS (it up to date).
Can you help me please ?
+Please note : Sorry if my English is bad : I'm french.+
>This computer has an Intel Core 2 Duo P7450 and is compatible with virtualization
This does not seem to be correct...
From my knowledge if the CPU would support the Intel VT, then this would be enabled by default.
But your CPU Intel? Core2 Duo Processor P7450 does not support the Intel VT-x and this is mentioned on Intel page:
I want to run a Virtual PC in VirtualBox and get the message, that I need to enable VT-x. I have updated to the newest bios (1.31) but i still don't have the option to enable "Intel Virtualization Technology" under the Config --> CPU menu. What am I doing wrong?
Go to Solution.
Look in the Security -> Virtualization menu.https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Enable-VT-x-in-bios-on-T420s/td-p/642461
where in the BIOS do I enable bluetooth? I have uninstalled and reinstalled the drivers and still no luck.
My company wants me to encrypt the hard drives on all desktop computers. All are running Windows 7 Ent (x32).When I try to enable Bitlocker to encrypt the drive it says I don't have aTPM 1.2 module. My company is located in Ukraine that`s why tpm module is allowed.When I reset security settings in bios, I have a question about reset tpm module(Press F1 if you want to reset tpm)There is no "tpm" word at all in bios(not in security, not in show settings)I already had updated bios to version: F.60 Rev.A 30 ??? 2015Do you have bios with enabled tpm for HP ProBook 6550b Notebook PC?http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-6550b-tpm-enable-bios/td-p/5794243
I have an HP 450 G1 laptop and want to install VirtualBox 64 bit for Linux. It requires that the Bios Virtualization setting be enabled. How do I enable this on the HP 450 G1? Thank you.
Please restart the Notebook and keep tapping F10 key during the startup to access the BIOS. Once you get to the BIOS please select System Configuration and then go to Device Configuration. Now here you need to look for either BIOS Virtualisation or VT-X and enable the same.Hope this helps, for any further queries reply to the post and feel free to join us again**Click the KUDOS star on left to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.Thank You,K N R KI work on behalf of HPhttp://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/how-do-I-enable-Bios-Virtualization-on-an-HP-Probook-450-G1/td-p/4859886
Got an older Averatec model 3150.
ALL drives are DIS-ABLED in the bios -
I need keystrokes to RE-ENABLE at least one i.e. the CD drive so I can reload my Windows XP.
See the manual here, or download it :- http://www.retrevo.com/pdf/1002bh238/67/BIOS+Setup+Menu#q=Averatec+3150H
Hi, My Packard Bell laptop is running Windows XP. Somehow my CD/DVD drive has become disabled. The whole D drive seems to have just vanished into thin air.
I've been into regedit and removed the upper and lower filters and it still wont work.
I cant find the device in device manager. Infact the only place I have found it is in BIOS where it says its disabled.
Please can someone help me, its really starting to drive me mad lol...
Oh I also went to system restore and tried to restore the computer back three months when I know it was working but it wouldnt let me for some unknown reason. Im sure somewhere there must just be an enable/disable button but I cant find it.
Thanks in advance for any help you can give me.
Try installing another optical drive and see if it is detected properly
Hi, as mentioned on my other problem (system not shutting down correctly) I can't enable ACPI in the BIOS settings. Right now there are only very limited options so I think there must be some kind of advanced settings. Is there any way to activate further options in the BIOS (version 1.11)?http://community.acer.com/t5/E-and-M-Series-Laptops/How-to-enable-advanced-BIOS-settings-on-ES1-311-C82S/td-p/434777/jump-to/first-unread-message
the BIOS show "Virtualization" is disabled and Notes: to enable it requires a "Full BIOS reset Question how to do this? Thankshttps://forums.lenovo.com/t5/ThinkPad-L-R-and-SL-series/how-to-enable-Intel-R-Virtualization-in-the-BIOS-in-SL400/td-p/3391188
Hi there guys - any help will be much appreciated I had a bit of a problem with Malware which led me to reinstall windows I had also at the time been trying to install Linux to dual boot beside it However upon reinstalling I got the annoying watermark saying quot Secureboot isn't configured correctly Boot on Secure enable BIOS. Can't my quot Having decided I would rather remove the watermark and having gone back into the BIOS with a Can't enable Secure Boot on my BIOS. reinstall and trying to enable secure boot I get a message - quot CSM is Loaded Disable the CSM via Setup and repeat operation after Restart quot However there Can't enable Secure Boot on my BIOS. is as far a I can see no option to disable the CSM in my bios - I've tried disabling anything related to Legacy and reinstalling both Ubuntu and Windows as well as wiping the drive and jumping the CMOS as well as updating the BIOS Am very much at a loss and feel I've tried every permutation in the BIOS Could possibly be an incompatibility with graphics card but wouldn't know where to start on that end if it is Many thanks for your time
CSM will not always be shown as a CSM on/off option; however, the Compatibility Support Module directly relates to Legacy support. So, I would start by resetting my BIOS to defaults and then reviewing the following options:
Sets the Windows secure boot to prevent the unauthorized accessing. Press
<Enter> to enter the sub-menu. This sub-menu will appear when ?Windows 8
Feature? is enabled.
Secure Boot Control [Disabled]
Enables or disables secure boot.
[Enabled] Enables the secure boot function and allow you to set the secure
[Disabled] Disables this function.
Secure Boot Mode [Standard]
Selects the secure boot mode. This item is to select how the secure boot keys
be loaded. This item appears when "Secure Boot" is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom] Allows user to configure the secure boot settings and manually
load the secure keys.
Image Execution Policy
Sets the policy when the system image execution policy on Security Violation.
Press <Enter> to enter the sub-menu. This sub-menu will appear when ?Secure
Boot Mode? sets to [Custom].
Manages the secure boot keys. Press <Enter> to enter the sub-menu. This sub-
menu will appear when ?Secure Boot Mode? sets to [Custom].
LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when "Onboard LAN Controller" is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled] Enable the USB support for legacy operating systems that do not
[Disabled] The USB devices are available only for UEFI applications.
Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS
[UEFI] Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot
All the above information is available in your owner's manual which can be downloaded here:
MSI USA ? Download Center
Hi all,I run a screen magnifier and sometimes after it has been on for awhile the fonts get tattered looking,they don't show as bold but really shabby,and I was wondering if I enabled video ram cacheable in advanced chipset features in the BIOS,would that have an effect on the magnifying program?
Downloaded Virtual Box to M73 Tiny Desktop. Can't access Acceleration tab (greyed out) to setup guest OS -- all "help" points to BIOS setting...
Any idea of WHAT and WHERE in BIOS to enable, to gain full access to Virtual Box?
Mod: edited Subject line to add system type and clarify problem description
Go to Solution.
What is the version and date of the BIOS?https://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/M73-Tiny-Is-VT-possible-BIOS-settings-to-enable-Acceleration/td-p/3421231
virtualization is not found on bios, how to enable it?
Which model notebook are you referring to so we can help narrow down a resolution for you.
I need to enable Intel V-x in Windows 10 ,and I have followed the steps to go to the UEFI but when I go to the UEFI there is only BIOS setup that does not list the Intel processor. Is there a way to bypass the UEFI and go straight to BIOS files or do I need to go back to Windows 8.1?http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/UEFI-BIOS-not-available-to-enable-Intel-V-x/td-p/5715644
I'm new here so just so ya'll know I'm Jason. Anyways, I'm working on trying to create a Hackintosh (yes, it is possible on AMD) but it requires you to change your HD to ACHI mode. I looked in the BIOS and there is no options. Any Ideas?
I am trying to setup up my home computer to work with WOL. I have selected the "Allow this device to being the computer out of standby" in the Device Manager under Network Adapters. After doing a google search, I have also discovered that I need to enable WOL in my computer BIOS settings. I have reached the BIOS settings, but I cannot find any selection to enable WOL. I think the computer is new enough (2 years old) to be WOL compatible, though. How do I turn it on in BIOS? There appears to be no manual for this motherboard, and there is nothing about it in the Dell XPS 400 Owner's Manual.
Dell XPS 400
Model: Dell Inc. 0FJ030
Chipset: Intel 945P (Lakeport-P) + ICH7DH
I'm purchasing a new SSD next week. I've been reading up on it and it looks like I need to enable AHCI in my BIOS. I can't find any option for AHCI though.
I currently have my System setup as RAID0. This was how it was set up in the factory and I haven't changed it.
The only option I have is under SATA operation and I can either set it to "RAID Autodetect/ATA" or "RAID ON".
Is there anyway I can check to see whether AHCI is already enabled? If not will one of the above options enable it?
Some motherboards incorporate AHCI SATA automatically. In the early days of SATA there was a lot of confusion in terminology. "RAID" - "AHCI" - all the same thing.
For your motherboard it looks like you want to choose "RAID Autodetect/ATA" to use a non-RAID setup with AHCI.
My hard disk is broken but the computer can't boot from my new replacement hard drive. I have checked the Bios setting and the legacy boot option is locked. I disabled secure boot but it still doesn't allow me to enable legacy boot. I downloaded the updated BIOS .exe (sp70481.exe) file from HP website but I am not sure if I can flash the BIOS using that file. Is there anyway that I can enable the legacy boot option so that I can boot from my hard disk? I appreicate any advise and suggestion. Thank you.http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Can-t-enable-legacy-boot-in-BIOS/td-p/5837675
I am trying to run Vmware Virtualization on my pc, but in order to do so, I think I have to go into my system BIOS and enable virtualization. However, I beleive I have went into my BIOS and could not fine any option for virtualization. Can somebody please help me? My computer is a HP pavilion and the model number is p7-1254. I have a Windows 7 64 bit.
Hi, Boot into the BIOS (F10) and change the VT setting to enable and save. See the below image. HP doesn't support VT on consumer PCs. There has been mixed results with getting VT to work.http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/Cannot-enable-virtualization-in-my-Bios-Menu/td-p/4033470
I have obtained a few old panasonic cf- toughbooks None of them included the hard drive caddy with the proprietary ide connector needed to install a hard drive Instead of buying the caddies I thought I would try to boot into a linux distro from a USB flash drive I had to use a special grub floppy because there enable host controller in usb bios is no cd drive only a floppy After all that I discovered that the USB host controller is not turned on when it first boots up I tried to enable usb host controller in bios find BIOS updates that would activate usb booting but no luck I thought I would ask if anyone has any ideas as to how I can get these laptops to boot from a flash drive I figured if I could get the base address for the usb controller I could enable usb host controller in bios edit the BIOS binary file that I have now to see if I could enable it but I don t know how to get the base address Any ideas nbsp
No ideas at all? I figured I would need to probably have to figure out how to flash the bios and reprogram it myself, which I don't know how to do. I guess with I2c? Does this seem to make sense to anyone? I see over 200 views but no replies. Am I just speaking jibberish nonsense?
I just upgraded an HDD to an SSD in a HP laptop. The BIOS does not show any SATA options at all. How can I figure out from within Windows 8.1 if AHCI is enabled?
I'm currently using a MSI 865G Neo2-P motherboard with a P4 2.8(HT) CPU.
I'm unable to enable the HT function in the BIOS.
What should I do?
Hello, How can I enable hardware Virtualization in the system BIOS of the HP 110-243WB Desktop PC ? Any help and advice would be appreciated. Thank You in advance.Spoiler (Highlight to read)
Hi: See if the BIOS in your PC has this setting...http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Request-help-to-Enable-hardware-virtualization-in-BIOS-in/td-p/5595501
Hi gurus I thought I would humbly ask for some advice from the experts since I am having a bit of a time trying to get my mobo card combo to work correctly The system is a bit dated I built it back in and it has run pretty well since then When I first got it up and running everything including the SLI was working just fine Fast forward to a week ago when I get a wild hair up my and decide that the computer feels slow and it needs an OS reload enable mobo SLI - bios will with SLI Neo4 Problem not K8N anyway I stick all my junk on my gb slave sata drive disconnect it for safety s sake and commence deleting partitions and formatting my primary drive I reload windows and everything is going smoothly until I realize that in Problem with K8N Neo4 SLI mobo bios - will not enable SLI order to get SLI working I need to flash the bios Okay no biggie I go to MSI s website and they re flaunting the new live update function as the most awesome thing since sliced bread I notice it doesn t need a floppy disk in order to do its thing and I don t have any lying around since I moved so I m like HELL YEAH And I try to run it BAD IDEA My computer promptly takes a huge dump and bluescreens then tells me keyboard error or no KB present Having run into this problem before I reset the CMOS and test all my connections on the mobo just in case and restart I had to manually remove all the components of the MSI live update service in safe mode as the uninstallation tool was corrupted and because everytime it tried to load it would bluescreen again and die in a fire So as it is now my computer boots fine and gets to windows albeit with a weird bios that I assume is factory set it s the K N diamond bios which may not enable SLI but I can t find a reputable download for the K n Neo SLI bios - MSI s website just does not have one or they hid it really well There is no option to enable SLI in any of the Nvidia menus I have even though i just downloaded the latest drivers for my cards I m about to throw the thing out the bloody window Please spare it this fate Any help would be appreciated I ll be hanging around the computer and refreshing this topic every few minutes so ask questions all you like - I realize you might not have all the info you need from my ramblings Thanks in advance Specs Windows XP SP MSI K N Neo SLI mobo MS- gb ddr ram x gb sticks MSI Nvidia geforce gt TD- E vidcards before you ask yes I am sure they are the same exact cards and yes they are installed correctly bridge and switch card and all they DID work fine before the Great Disaster of Last Week nbsp
Does this help locate the correct Bios rom
Click to expand...
I'm trying to find out how to access BIOS to enable the VT-x setting, currently it is disabled in the BIOS for all CPU modes(VERR_VMX_MSR_ALL_VMX_DISABLED).I tried the reboot, pressing f10 but it still brings me right to windows and not to BIOS. Thanks for any help!Vani
Vani-G, welcome to the forum. I suggest that you try tapping the Esc key as soon as the computer begins to boot. This will take you to a Menu where you can access the BIOS. I am not certain, however, if you will have the VT-x setting. HP doesn't always have all of the options to allow special features of components. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/how-to-access-BIOS-to-enable-the-VT-x-setting-on-a-HP-Envy/td-p/5585240
I have been attempting to Enable Legacy boot and Disable Secure boot on this machine for a few days now BIOS Enable to Legacy Boot Refuses nbsp My current BIOS version is N nbsp It is the oddest thing nbsp I am able to make some changes save and have them succesfully change but I cannot get legacy to enable and save nbsp Steps I have taken nbsp - Cleared Secure Boot Keys - Reset- Selected Legacy Support Enable and Secure Boot Disable - Reset- Go back to BIOS -- gt Boot Options -- gt Attempt to Uncheck UEFI Boot Order Unable to -- gt Check to see if Legacy Boot is available and its a no go- Then I go back to the secure boot options and verify that none BIOS Refuses to Enable Legacy Boot of my changes saved nbsp nbsp I am attempting to get these machines to PXE boot to grab our company's image but I need Legacy boot enabled to do it nbsp After several attempts to get Legacy to enable I resolved to just try to PXE boot nbsp BUT can't do that as well as it says the selected boot image did not authenticate nbsp Of course the fix I found for this was enable Legacy Boot which I can't do nbsp I tried a different method and still no BIOS Refuses to Enable Legacy Boot different results nbsp - Updated BIOS to V - reset back to factory settings in the main menu- back into bios set password --- gt reboot- back into bios disabled bootable devices usb and cd rom nbsp - went to secure boot options and selected in the drop down enable legacy and disable UEFI boot -- gt reboot- back to bios to nbsp the check box next to legacy in the boot options menu was still not available nbsp -- gt reboot- f to PXE boot and nbsp still doesn't work nbsp I have looked through the forums and found a few possible solutions but none of them have worked nbsp Please helphttp://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/BIOS-Refuses-to-Enable-Legacy-Boot/td-p/5777025
Currently, my Insyde BIOS (version F.0C dated 3/30/2010) does not allow for NX/XD capability, thus not allowing me to upgrade to Windows 10 (from W7 SP1)Will BIOS upgrade F.0E Rev (01/07/2011) listed on the HP website for my machine (running Intel Core i5 M430 @ 2.27Ghz) upgrade my particular BIOS to enable XD? Details of this BIOS upgrade state: Enables the Intel CPU "Execute Disable Bit" functionality automatically, which helps to prevent some classes of malicious buffer overflow attacks when combined with a supporting operating system.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/BIOS-upgrade-to-enable-NX-XD-for-Win10-install/td-p/5682770
I have a an Acer Aspire E15 E5-1G-TH with an AMD A10-7300 processor. I need to enable virtualization (Intel Vt-x / AMD -v) so that I can run Virtual Box and Android properly. I have run Speccy on my laptop and I see that virtualization is supported but disabled. When I go into bios to enable virtualization is normal option to do so is missing. I've now read that Acer uses a modified version of bios that hides this option. How do I get in and enable virtualization?
We have the same issue, WTF ACER please help us.http://community.acer.com/t5/E-and-M-Series-Laptops/Enable-virtualization-in-Bios-on-Acer-Aspire-E15-E5-1G-TH-with/td-p/429265
I built a computer back in 2009 with an Intel DP55KG motherboard running Windows 7. So, I am getting for a fresh Windows 10 install and I noticed that back in 2009 I never enabled the UEFI boot mode. Would it be recommended to enable it this time before the Win 10 install, or will it bring about some issues?
Here is the definition of the setting according to the motherboard manual:
OPTIONS: ? Enable ? Disable
Enables or disables Unified Extended Firmware Interface (UEFI) Boot. UEFI Boot must be enabled in order to boot to a drive larger than 2 TB (terabytes). Enable: BIOS will attempt to boot via UEFI before using the legacy boot sequence. Disable: BIOS will use the legacy boot sequence.
i have being finding it dfficult to boot my system from HDD. each time i want to enter the BIOS set up, it will request me to type in BIOS password. After Disassembling all the parts of the system, i was able to get a password reset of '12345678' after getting access into the BIOS setup. the boot order was not showing i.e. Internal CD/DVD ROM, Notebook HDD ets was not showing on the BIOS BOOT Order option. I really need your help to solve that problem.http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/how-do-i-unlock-my-BIOS-password-so-as-to-enable-boot-from/td-p/5647257
When I select Enabled next to Virtualization Technology in the screen below, the next time I open BIOS the option automatically goes back to Disabled. From looking online I believe this is to do with HP OEM. How can I fix this?http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/BIOS-doesn-t-let-me-enable-Virtualisation-Technology/td-p/5728990
windows 7 can't install. at the time of installation the error message is please ensure that the disk controller is enable in bios..how to solve this problem on hp 15-ac042TU laptophttp://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/please-ensure-that-the-disk-controller-is-enable-in-bios/td-p/5726229
System = Dell Inspiron 531
Had issue with boot drive, so replaced and re-loaded Windows Vista OS.
Decided to add original drive to grab some data; so installed the old drive in Sata Port 2. The drive did not work -- I thot is might be a bad SATA cable, so started switching things around.
Net is -- drive works fine if new boot drive is in SATA port 0; and prior hard drive is plugged in SATA port 1 (where CD had been plugged). Copied data, etc.
So -- knew I needed to ENABLE SATA Port 2 in BIOS -- but when I go there -- those items are 'Greyed out' and not selectable.
KEY QUESTION - Is there some other change that has to be made to enable SATA ports in BIOS? I went in Device Manager -- found the 'controller' entry -- but nothing seemed out of place there.
Thanks in advance for any suggestions.
Under Integrated Peripherals in the BIOS are the SATA ports greyed out even if there is a device plugged into one of them? I wish your manual would show illustrations of the BIOS pages but they don't.
I have a an Acer Aspire E15 E5-1G-TH with an AMD A10-7300 processor. I need to enable virtualization (Intel Vt-x / AMD -v) so that I can run Virtual Box and Android properly. I have run Speccy on my laptop and I see that virtualization is supported but disabled. When I go into bios to enable virtualization is normal option to do so is missing. I've now read that Acer uses a modified version of bios that hides this option. How do I get in and enable virtualization?http://community.acer.com/t5/E-and-M-Series-Laptops/Enable-virtualization-in-Bios-on-Acer-Aspire-E15-E5-1G-TH-with/td-p/429265/jump-to/first-unread-message
My bluetooth stopped working in my ASUS Q302LA. Bluetooth doesn't even show in the Settings>Devices in Win 10. In Device Manager, under Microsoft LE Enumerator, Properties, it states "Device cannot start, Code 10." I clean installed win10 and am getting the same result, which leads me to think it is a BIOS problem. Any ideas.
When I select Enabled next to Virtualization Technology in the screen below, the next time I open BIOS the option automatically goes back to Disabled. From looking online I believe this is to do with HP OEM. How can I fix this?http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/BIOS-doesn-t-let-me-enable-Virtualisation-Technology/td-p/5728990
Currently I have the : "HP Compaq 8200 Elite CMT PC" and cann't find any option in my BIOS to enable the Virtualization technology..... any BIOS update ... or solution ? current BIOS : J01 v02.06 ME Firmware Version : 184.108.40.2063 Please .... reply as fast as possible.... Thanks
Tarek_Mamdouh wrote:Currently I have the : "HP Compaq 8200 Elite CMT PC" and cann't find any option in my BIOS to enable the Virtualization technology..... any BIOS update ... or solution ? current BIOS : J01 v02.06 ME Firmware Version : 220.127.116.113 Please .... reply as fast as possible.... ThanksIf you do not see it as available in BIOS then the feature to enable it is not there. I l perused the available BIOS updates and there are none that add that capability.This is something very commonly found in manufactured PCs. I looked into the BIOS simulator for this model and I also do not see it. That was for a pre-production BIOS. Best regards,ericohttp://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Cann-t-enable-the-virtualization-technology-on-the-BIOS/td-p/1117669
Not sure if this is a Boot or Operating System issue so let me know if I need to move this to the other board. I'm trying to enable virtualization on my computer, which can only be done from BIOS (or apparently in the case of Windows 10 UEFi). I've followed various tutorials online to access UEFI (Shift + Restart > Troubleshoot), but when I get to the troubleshoot menu where there should be access to UEFI-Firmware, there's just a link to Startup Options/Settings (I can't remember the name of it exactly as obviously I don't have it in front of me right now). From what I've read the access to UEFI can vary depending on manufacturer, so I was wondering if HP might have moved access to UEFI somewhere else? Any help ASAP would be much appreciated as I need access to this to study!
Hi, You should be able to access this as follows. Shutdown the notebook. Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. The option to enable virtualization should be found under the Advanced tab.....Device Settings.....Device Configuration. Regards, DP-Khttp://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Access-BIOS-UEFI-Enable-Virtualization/td-p/5751606
I gotta turn the Virtual Technology(vt-x) option on for some purpose...Exploring the BIOS settings i found that Virtual Technology option is there in advanced options but it's unchangeable means i can't get access to set it enabled. Now it's urgent for my task ,to enable the vt-x option, to be completed.Any kind suggestion?~TIAhttp://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/I-can-t-enable-Virtual-Technology-from-BIOS-as-the-option-is/td-p/5727554
I am trying to install Windows 7 from a DVD to an HP 19-2113w All-in-One with Windows 8.1 as the factory install. I have entered the BIOS, turned off Secure Boot, restarted, and entered the code to confirm that I want to disable Secure Boot. Upon restarting and going back into the BIOS, Secure Boot shows it is "Disabled." HOWEVER -- when I then go into the boot options and try to enable the legacy boot devices, it gives me a message saying "You must disable Secure Boot before you may configure this option." As I previously stated -- Secure Boot shows "Disabled" when I check under the security tab. How much more disabled can it get? Am I missing something here? Is there any other way to install Windows 7 from a DVD onto this computer?http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Bios-Will-Not-Let-Me-Enable-Legacy-Boot-Even-When-Secure/td-p/5726166
I am unable to enable Virtualization using BIOs settings in HP 630 Notebook as the option itself is not there in security tab or system configuration tab. Please help. [email protected]http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Enable-virtualisation-Intel-Vt-X-on-HP-630-Notebook-BIOS-not/td-p/5792706
computer Bill belongs to me
I accidentally ran this part of
Turkey not enought support
please help how can i disable?
You can turn it off in BIOS setup (f2 at powerup).http://en.community.dell.com/support-forums/laptop/f/3518/t/19544689
I am currently trying to install Docker toolbox on my HP 4530s (Windows 10 pro) machine.
I have tried to access the UEFI firmware via the path:
[ Windows desktop > Settings > update & Security > Recovery > Advanced Startup (Restart Now) > Troubleshoot > Advanced options > ..... .
I was supposed to see the < UEFI Firmware settings> here, but rather, i get a "Return to previous known build" option.
I then tried to access my BIOS but I cannot remember my BIOS password from 4 years ago.
i will really need the best of help i can get on recovering the password or more specifically - ensuring I enable my Intel VT-x.
Serial number - [Personal Information Removed]
Model number - A7K05UT#ABA
Ethel. Contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password. http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. REOhttp://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/BIOS-Password-needed-to-enable-Intel-VT-X-for-Docker/td-p/5647717
I jsut installed 4GB of RAM on my Tecra A9 PTS52E; but Windows 7 tells me it can only use 2.99 GB of RAM. In order to get more out of the memory I read that I have to enable "memory remapping" in my BIOS. But where do I find that? I have BIOS version 2.10-WIN installed... If I'm not mistaken this is the most recent version for my model...?
If you installed 32bit Windows 7, you won't get more than 3GB due to 32bit addressing limitations.
If you have 64bit Windows 7, the 1GB is probably being used by the graphics chip (GPU) as Video RAM.
I have a Dell Inspiron 13 - P57G.
One of the most important features of the offered by Intel Skylake mobile CPUs series is Speed Shift, which improves CPU battery and speed performance. However, this featured came disabled on this model current latest BIOS (version 1.08). And there is no setting that allows to enable it. Other laptop manufacturers have this feature enabled in their current line of laptops. Dell support, please provide a BIOS that has this feature enabled or switchable.
Hello! So i looked up Inspiron 13 P57G and it states its an Inspiron 7347 which came with 4th Gen Intel 4xxx series i3 and i5 processors, not skylake which is 6th gen 6xxx series. Is there a model number on the bottom of your laptop?http://en.community.dell.com/support-forums/laptop/f/3518/t/19987123
I have a legacy intel pc thats chugging along pretty well. I currently dont have the option to boot from USB. However it seems a later version of the bios solves the problem but I wanted advice before I do anything and also pointers on how to update, if thats the way to go.
Motherboard: Intel D815EEA
I downloaded a document from intel which seems to suggest version EA81510A.86A.0051.P11.0051
and above have USB boot enabled from the BIOS.
Should I upgrade and how do i do it?
If it's an OEM (brand name) PC, you should only use BIOS updates supplied by that manufacturer (via their website), as those direct from Intel may not be the right one for that board, so you could end up with a non-working PC and no easy way to fix it.
I have a 1 yr old dell vostro 3400 and for most of that year the wireless worked perfectly. Recently I have no wireless: I cannot set up or connect to anything, and nothing is visible. When I go to control panel\network and internet\manage wireless networks, is says "Wireless is not currently enabled." I know about the little toggle on the laptop's exterior, and that is in the correct setting. I ran a hardware check from the BIOS and all relevant hardware is properly working. When I go to registry editor though, some of the files in System\CurrentControlSet\services\Wlansvs\Parameters have no values set to them (I didn't set them like that).
Do you have any ideas on how I can reenable wireless or is there a list of default working values for those files?
This may help and won't hurt.
From the cmd prompt/admin run sfc /scannow and see if it give a clean bill of health. In the past have you run any registry cleaners or tune up programs? Have you had to remove and virus or the such?
Just unboxed an NB10-A and applied our standard policy of setting a supervisor password on the bios.
Now when I enter the bios setup during boot it defaults to non-supervisor mode and I can find no way to get it to prompt me for the password to allow me to make changes.
Does anyone know what I'm overlooking? All options are greyed out and I can't make it ask me for a password.
> Now when I enter the bios setup during boot it defaults to non-supervisor mode and I can find no way to get it to prompt me for the password to allow me to make changes.
Usually if the supervisor password has been set, you can access the BIOS pressing F2 button.
Now you have to insert the Supervisor Password or you can proceeds with limit access to different BIOS options by pressing the F11 button.
If you have inserted the right supervisor password, you could delete it again in the BIOS security tab.
Usually you have to insert the right supervisor password and have to press ENTER twice just to delete it. Then save the changes
Here an short description what the supervisor password does.
My older brother has a Toshiba Satellite laptop. In his configuration, he has enabled fast boot up, thus, upon power up, the initial splash screen doesn't show but straight to the windows login screen. Now, I wanted to access the BIOS but I don't know how. I tried pressing DEL (for the BIOS setup) but since he has once enabled fast boot up in the BIOS settings itself, I can no longer do so. It always goes straight to the logon screen. Please help guys. I've tried searching the forum for possible same case/s but to no avail.
I just googled how to enter the BIOS on a toshiba and saw several suggestions, including:
escape key for 3 seconds, followed by F1.
Take a look:
- Google Search
When will Dell enable Intel Speed Shift via a BIOS update? All the BIOS update requires is requires is writing 1 to MSR 0x770!
Speed Shift was fully supported by Intel and Microsoft in 2015 (1 year ago!). It makes the CPU much more responsive (particularly in gaming and real-time tasks) and costs nothing.
In the meantime, anyone can run software manually to enable Speed Shift but you need to relaunch the software every time your computer sleeps or turns off, so that is inconvenient. But the boost in performance is worth the effort.
I have manually enabled SpeedShift via software such as ThrottleStop or just writing 1 to MSR 0x770.
Dell - can you get Speed Shift into the next BIOS revision?!?!
Such a shame that a premium workstation doesn't even use some basic skylake features. Dell please fix this.http://en.community.dell.com/support-forums/laptop/f/3518/t/19994644
I'm having some trouble with my ASUS BIOS. It is possible one of the reasons which is not letting me enable AGP Texture Acceleration (from DXDIAG). So now I need to update it. Ive read that you can 'flash' this however it seems quite complicated. I read the procedure here - http://www.planetamd64.com/lofiversion/index.php?t11803.html. Personally i dont think i have that ability to literally take apart my PC and dont want to risk that. Is there anything I can do to enable AGP Texture Acceleration w/o updating bios?
I have tried many driver versions. Here is my info
ASUS A8V Deluxe Mobo
Chipset VIA K8t800 pro
CPU: AMD Athlon 64+ 3500+ Socket 939
Current BIOS version : 1017.002 (date: 11/14/2005 - very old)
GFX is a ATI Radeon 9600 Series
Any help si appreciated. thanks in advance.
Hi, linkzor. I looked up your motherboard on the Asus site, and the bios updates they have listed for your motherboard are not even worth upgrading to. They don't list anything about fixing agp texture acceleration, either. However, if you still want to flash your bios, simply visit the asus support website, download their auto-flash bios tool and your bios, and it does everything for you. you do NOT need to take apart your pc.
Also, Perhaps your video card does not support agp texture acceleration?
I have a very serious problem with my newly bought computer I have just bought I bios If helds HT . 7.1 enable while winxp in system SP2 in instaling Creative Intel Pentium HT GHz mb L prescott Intel Mobo D GAV-L Casing PSU W MSI Geforce GT MB Nx gt TD E and I have some old things which i plug in my new system mention below Kingstone MB Mhz Ram Seagate Gb Baracoda HDD LG Combo drive Creative Live SoundCard Lucent Modem Fly Video TV tuner I assemble my computer and If I enable HT in bios system helds in winxp SP2 while instaling Creative 7.1 . install Windows XP pro SP HT enabled in the bios while installing windows When i completed windows installation and install the driver of Creative Live soundcard Full software instal not only the driver my computer freezes I restart my pc and install other drivers modem If I enable HT in bios system helds in winxp SP2 while instaling Creative 7.1 . Grafics card at If I enable HT in bios system helds in winxp SP2 while instaling Creative 7.1 . this time my system works great When i again install the Creative soundcard softawre driver system again held totaly freez I restart my pc and this time I Disable HT in the bios then i again install my soundcard drivers now system does not freez and the installtion is completed sucssesfuly I resatrt my pc and enbale HT in bios and when windows start and loads the soundcard software at startup the system again frezzes I change the pci slot of the card but it dosent work I reinstall the windows HT enabled in the bios but this time Windows XP Pro not sp install the soundcard software-driver whole cd installation and my PC install the software without freezing I install other softwares and drivers but system does not freeze But when i install the SP Patch SP upgradation after restarting my system again freezes on the loading of soundcard software driver When I enable HT in bios system helds and when i disable it system does not freeze Whats the problem What should i do I am realy confuse about it I want to enable HT but it freezes Plz help me My soundcard drivers are latest If someone helps me i ll be greatly thankful to him nbsphttp://www.techspot.com/community/topics/if-i-enable-ht-in-bios-system-helds-in-winxp-sp2-while-instaling-creative-7-1.32463/
hello nbsp days ago my laptop was working fine but when i hp pavilion help dv7 bios turned it on yesterday it would not load up all it would do is power on a blank screen and the caps lock would flash twice and stop and flash twice again i looked it up and saw that it was hp pavilion dv7 bios help a bios problem and to manually nbsp fix it was to hold down the windows b key and turned it on and needles to say it didnt work i even try to reset it by taking out the battery and holding down the power button to see if that'll help and nope today i look online to see if theres a way i can fix it but so far all i see is to take it apart to look at the fan or some part near the fan to be honest i don't nbsp feel comfortable nbsp taking apart my laptop at all nbsp i dont mind doing the programing and stuff though and i was wondering if theres something else i can do to get this problem nbsp fixed asap please help and thank you
These will help:http://support.hp.com/us-en/document/c01732674andhttp://support.hp.com/us-en/document/c02222922http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/hp-pavilion-dv7-bios-help/td-p/5722244
i have a older hp pavilion ze 4200 and a while back my son tried to flash the bios and something was done wrong. now my laptop won't boot up or do anything, it just sits there.
is there a way and how can i flash the bios to be able to use this thing again. another issue is no floppy drive just a dvd/cd rom so I'm guessing it would have to be some kind of bootable cd or dvd. please help
thanks in advance
Hello, I have a problem with finding the BIOS for my pavilion dv5, on the official website only program to update the BIOS, but I need the file itself to edit it( I want to overclock it using the video adapter), and even delved into the Internet, but there is the same program. Help to find the file please)))) (Sorry for my english)))http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/BIOS-for-pavilion-dv5/td-p/5631414
Looking for confirmation of which BIOS update to install for a Pavilion 500-039-there are several listed on HP's website.
Hi @NVMO2007, and thank you for your post.Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you are looking for the correct BIOS to use. I am happy to assist. If you are not using the HP Support Assistant, then give it a try. It should find the correct version for the mix of hardware in your system. HP PCs - Using HP Support Assistant (Windows 10, 8, 7) Please let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/BIOS-Upgrade-for-Pavilion-500-039/td-p/5549696
Hello, in my tablet PC have toenter Administrator Password or Power On Password,after three attempts goes the inscription:System Disabled and get Which is a master password?
@kolbasitos? Please try: 38671475 Regards.http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/pavilion-x2-password-bios/td-p/5825487
Hi Guys-n-Gals I have an HP Pavilion DV Laptop I have Ubuntu Linux on a Samsung HM JJ Gb HDD in bay one boots with no problems at all I have Windows XP PRO SP preinstalled on a WD BEVS Gb hdd in bay two drive not seen in BIOS so I do not have a choice to boot from it Ubuntu Linux still boots fine no problems Second HDD Win XP is seen by Ubuntu Linux and I can access folders on the drive with no problems so nothing wrong with drive or OS If I take out the drives and put the WD drive in bay one HP Pavilion seen in BIOS two bay drive not leaving the second bay empty it boots fine into Windows with no problems If HP Pavilion drive bay two not seen in BIOS I take out the WD drive and put it in bay two leaving bay one empty I get no boot operating system not found If I take out the Samsung drive and put it in bay two leaving bay one empty I get no boot operating system not found So either disk will boot fine when in drive bay one Neither disk will boot when in drive bay two HP Pavilion drive bay two not seen in BIOS If both drives are in both bays either way round the drive in the second bay will not show in the BIOS and will not boot Question How do I solve this problem HP as usual are no help Thanks in anticipation of any help Tomorrow is an extension of today but yesterday is just a memory nbsp
Sounds like it is a mobo issue. "Bay 2" connection is bad.
Hello HP-team nbsp I've got hp pavilion aio pc CZC BKNV model -b ec which doesn't boot No screen no POST-sounds nbsp I downloaded sp and copied the BIOS to the USB-Flash and tried to recover it via Win B Power keys combination but unsuccessfully no any result nbsp I tried to read data from Windond W Q Flash memory using the pavilion aio hp currupted - BIOS pc 23 external SPI-programmer connected to ROM-RECOVERY connector but unsuccessfully also nbsp I removed mentioned W hp pavilion 23 aio pc - currupted BIOS Q memory from the PCB soldered the wires to its pins and connected directly to programmer but still w o results Thus I decided W Q got NG and has to be replaced nbsp I found S FL K manufacturer is Spansion soldered it onto PCB and flashed via ROM-RECOVERY connector using the external SPI-programmer I tried to burn LEE ROM from sp LIN BIN from sp and LEE ROM fro sp The flashing process per se finished successfully always but PC doesn't start as well After I turn it on it restarts only after some seconds The screen is black no any sound nbsp So may the problem be in S FL K compatibility It has same protocol capacity but there are also some differences which might be significant nbsp So my questions are nbsp a Is S FL K Spansion compartible with my PCB Or do I have to use Windond W Q exactly Or something different nbsp b As I mentioned I tried to flash rom or bin files from sp exe-packages downloaded from HP-site Is it enough Or should I do something in additional Or nbsp So I would be glad for any help nbsp BRhttp://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/hp-pavilion-23-aio-pc-currupted-BIOS/td-p/5785511
I downloaded the new BIOS from the HP support page for the 569, it's BIOS A0.07 Rev A from 2016-10-06. I currently have BIOS ver 80.06 from 2015-04-01. I tried to install from the UEFI BIOS firmware upgrade menu and it says "BIOS image did not pass validation". I also tried to install from within Windows 10 and the option to upgrade is greyed out and below its says BIOS is not compatitble with my system. Should this BIOS upgrade be on the 569 support page?http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/BIOS-Upgrade-for-Pavilion-569/td-p/5851228
I got a big problem A friend asked me to update his OS on a HP Pavilion MHZ desktop So i HP UPdate Pavilion Bios did He also asked to upgrade his memory from from mb to mb So HP Pavilion Bios UPdate i tried He has the pin Sdram DIMM One stick worked fine But when I put in the second stick it errors quot bios not acpi compliant quot So i looked up the error First i found that i can just turn off the acpi in cmos and it will work No option in cmos Then I found to redo the install and at the setup screen hit F instead of F Did not work Blue screen during install Also found that i need to update the bios Went to HP site NOthing there Went to motherboard site Its an asus k m board Got the updated bios Got the flash program No luck Says bios chipset not found CAnnot flash the bios Thing is i am stuck Got the memory from a local computer shop He had to special order it since its so old He will not take it back I need to flash this bios Anybody know where i can find a flash that will upgrade the bios or a website to help me with this The memory stick is good I can put either one in and it works fine just not both Very frustrated Thanks nbsp
What model Pavillion is it? Many times though you have an asus mobo the Bios has been customized for HP to work with it. And the motherboard may also not be a standard asus K7m motherboard, being a custom setup for HP.
Hi i have this HP Pavilion DV laptop which is causing me some problems I am currently testing two different hard drives with this laptop and DV5 HP BIOS Pavilion Only Runs I can confirm that they are working fine When I turn the laptop on the HP logo shows up a couple seconds later and I have the option of entering the quot startup menu quot If i don t enter it then it proceeds to a black screen around seconds later While this is happening the hard drive light goes flashes on and off until the black screen After that the hard drive light does not flash any more The computer is not able HP Pavilion DV5 Runs BIOS Only to boot properly and it cannot HP Pavilion DV5 Runs BIOS Only start Windows However if i enter the startup menu than I can run diagnostics on the hard drive and open BIOS The hard drive test passes easily but it is not being recognized on BIOS I neither can enable or disable the quot notebook hard drive quot because it is not contained in that list I should also add that these hard drives are working fine because i use them on different Laptops HP Pavilion DV and Acer Aspire One Please help with any suggestions nbsp HP Pavilion DV5 Runs BIOS Only
Have you installed an operating system on these hard drives? Operating systems can't be transferred and a fresh install is required if you move it from one computer to another. Have you tried booting from a live CD or flash drive?
Clarification, please! I've been told on this forum that I should upgrade the BIOS for my Pavilion g6-1d21dx to version F.48, which seems to be the latest one available on the product page. However, the BIOS currently on my machine is version F.49. Wouldn't F.49 be newer than F.48? Can anyone explain the discrepancy and tell me if there are any meaningful differences between the two BIOS versions?http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/What-is-the-latest-BIOS-for-my-Pavilion-G6/td-p/5733657
Hello HP-team nbsp I've got hp pavilion aio pc CZC BKNV model -b ec which doesn't boot No screen no POST-sounds nbsp I downloaded sp and copied the BIOS to the USB-Flash and tried to recover it via Win B Power keys combination but unsuccessfully no any result nbsp I tried to read data from Windond W Q Flash memory using the external SPI-programmer connected to ROM-RECOVERY connector but unsuccessfully also nbsp I removed mentioned W Q memory from the PCB soldered the wires to its pins and connected directly to programmer but still w o results Thus I decided W Q got NG and has to be replaced nbsp I found S FL K manufacturer is Spansion soldered it onto PCB and flashed via ROM-RECOVERY connector using the external SPI-programmer I tried to burn aio pavilion 23 - hp BIOS pc currupted LEE ROM from sp LIN BIN from sp and LEE ROM fro sp The flashing process per se finished successfully always but PC doesn't start as well After I turn it on it restarts only after some seconds The screen is black no any sound nbsp So may the problem be in S FL K compatibility It has same protocol capacity but there are also some differences which might be significant nbsp So my questions are nbsp a Is S FL K Spansion compartible with my PCB Or do I have to use Windond W Q exactly Or something different hp pavilion 23 aio pc - currupted BIOS nbsp b As I mentioned I tried to flash rom or bin files from sp exe-packages downloaded from HP-site Is it enough Or should I do something in additional Or nbsp So I would be glad for any help hp pavilion 23 aio pc - currupted BIOS nbsp BRhttp://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/hp-pavilion-23-aio-pc-currupted-BIOS/td-p/5785511
Hi,Please assist me in getting the bios password for my Hp pavilion dv4000. its giving me an error code of 01435
@Clima? Enter lvehe or hrbotr Regards, DP-Khttp://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/BIOS-for-my-HP-pavilion-dv4000/td-p/5781627
I have an HP Pavilion dv6 (Product Number: LL059EA#ABV) and I need to run a x64 virtual machine on Virtual Box 4.0.6.I got an error stating that I can't do that since the VT-x is not enabled.My Cipset is Intel 6 Series /C200 and I have the i7-2600M which have VT-x support as state by Intel.However when I try to enable this in my Insyde BIOS I can't see the option to do that.Please help me out because I am a software develope and I need this x64 OS (Ubuntu) urgently!
Hello all, Restoring the BIOS to default was the magic trick that solved the problem. Now my BIOS shows Virtualiztion Technology under System Configuration. Try it may solve yours too. Bye.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-Pavilion-dv6-enabling-VT-x-in-BIOS/td-p/656627
I have an HP Pavilion g6 that has a password set. As soon as you power up it wants a password. I saw other posts where you provided a code to bypass the password. My system code is 76169448 . Can someone help with my system?
@JewelAli? Enter 69841488 Regards, DP-Khttp://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/HP-pavilion-g6-bios-password/td-p/5680861
i have a hp pavilion ze4600 and the bios is asking me for a password. however i read some things on this site concerning hash codes and stuff like that. idon't know how to get a hash code or how you go about to generating them or even how to insert it and bypass the bios password. i would really appreciate it in advance and hope that i could get a positive result on this issue.
please help if you can!
Hi I am having the same trouble. To access your hash code when the blue box comes up and asks for the password press the F12 key and this will generate your systems hash code.
Hi,my Pavilion 13 keeps rebooting before even reaching the bios or any other menu. the Power button turns on, I can briefely hear the fan and the hard drive but then pc reboots without the blinking of any light.Any suggestion please ?thankshttp://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Hp-pavilion-rebooting-before-Bios/td-p/5821475
Hello all...I have a bios locked on a Pavilion...my code is 13215783Any assistance would be greatly appreciated. Scott
Sham Enter 02173305http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/pavilion-bios-Locked/td-p/5674626
I have an HP Pavilion g6 that has a password set. As soon as you power up it wants a password. I saw other posts where you provided a code to bypass the password. My system code is 76169448 . Can someone help with my system?
Hi, Enter 69841488 Regards, DP-Khttp://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/HP-pavilion-g6-bios-password/td-p/5680860
please could you give me the administrator password to get into the bios on my pavilion g6
Hi, At the password screen, hit enter 3 times and you should receive a 'halt code' - post back with this code. Regards, DP-Khttp://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/bios-password-for-hp-pavilion-g6/td-p/5739863
I am wondering fi you can still change out the BIOS in laptops.
I have my HP G6 Pavilion and its BIOS is limited in what options it offers, seems like HP allows Basic choices. I am wanting to know how to be able to either Unlock the BIOS or how to flash the BIOS with a version that will allow my laptop to run.
What are you trying to do, exactly? Flashing your BIOS is a bad idea for a lot of reasons. I don't recommend it unless there is a critical fix for something that doesn't work properly.http://www.techist.com/forums/f84/unlocking-bios-hp-pavilion-g6-275969/
I have a hp pavilion g6 notebook laptop, I cant get into the Bios, would you let me know what Fkey i need to press,I am running Windows 8.1 thank you A, Hart
Hi, Try the following. Shut down the notebook - do this by holding down the left Shift key as you click on Shutdown to temporarily prevent a hybrid boot. Tap away at the esc key as you start the notebook to access the Start-up Menu and then select the Bios option ( f10 ). Regards, DP-Khttp://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/how-to-go-into-bios-on-hp-pavilion-g6-using-windows-8-1/td-p/4855842
Hi,my Pavilion 13 keeps rebooting before even reaching the bios or any other menu. the Power button turns on, I can briefely hear the fan and the hard drive but then pc reboots without the blinking of any light.Any suggestion please ?thankshttp://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Hp-pavilion-rebooting-before-Bios/td-p/5821475
I entered the wrong password 3 times and got 57462882
Hi: Enter this unlock passcode... 48540204http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/I-need-help-with-hp-pavilion-bios-password/td-p/5756258