Windows Support Forum

hp pavilion g6-2260us and TWC Maxx 300mbps

Q: hp pavilion g6-2260us and TWC Maxx 300mbps

I have recently installed a new network adapter WLAN card (Intel Centrino Wireless-N 2230) and want to install the Realtek PCle gbe family controller so that I can take advantage of the TCW MAXX 300 mbps speed. How do I get the gbe to install? I have downloaded the gobal file from Realtek and it keeps installing the fe family controller. How do I get it to install the gbe family controller? ... Thanks for any help and thoughts.

Relevancy 100%
Preferred Solution: hp pavilion g6-2260us and TWC Maxx 300mbps

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: hp pavilion g6-2260us and TWC Maxx 300mbps

Hello,your model HP Pavilion g6-2260us do not have gigabit ethernet controler but only 10/100BASE-T Ethernet LAN (RJ-45 connector), you can check spec of your unit on controler is tight with unit systemboard so it is not exchangeable. If you are looking for faster connection then you will need to purchase external USB network adapter.

I am an HP employee.
Relevancy 51.17%

After reinstalling windows 7 64bit and update all the drivers from DELL support, i do not have anymore 300mbps but just 150Mbps.From manager devise/network adapters/Intel Centrino Wireless-N1030/properties/advanced/802.11n bandwidth 2.4, i have to choices 20 MHZ and auto. I marked AUTO. With few words i lost the 40MHZ choice. At this moment my DELL is not 40MHZ capable, and Idon't know why.
My Router is Linksys X1000 N300 with ADSL2+Modem and marked AUTO (20MHZ or 40mhz)

A:XPS 17 l702x - lost 300Mbps

We?re listening. We?ll surely try and assist you. We appreciate you as you?ve tried troubleshooting the issue. Due to reminisce of the previous drivers, the speed may be 150 mbps. We suggest you to uninstall the wireless driver completely and reinstall the same.
Please let us know if this helped.
Relevancy 51.17%

anyone recommend a router capable of streaming hd material (say 300mbps) that is x64 friendly, no drop outs, good signal and fast, that also has maybe a usb adapter stick thats compatible with it?

Relevancy 50.74%

For my laptop, the speed was 300Mbps few days before but it changed to 54Mbps last night. I did not change any settings for my router and adapter and the only software I installed during this period is Windows update of March. I found the client monitor in router's setup page displays 802.11n is disabled. So what are the reasons?

Thanks in advance.

P.S. I've got the adapter driver to be the latest one.

A:WiFi speed down from 300Mbps to 54Mbps??

set wireless channel to automatic?
Relevancy 50.74%

I have a Western Digital Blue HDD which supposedly has a transfere rate of 300MBps, but I have just backed up my user folder and noticed that the tranfere speed was only at 30MBps, why doesn't it use the full 300MBps?

A:Got a WD Blue which supposedly has 300MBps transfere.

I am not sure, but I do not believe your motherboard can handle Sata3.
Relevancy 50.31%

After reinstalling windows 7 64bit and update all the drivers from DELL support, i do not have anymore 300mbps but just 150Mbps.From manager devise/network adapters/Intel Centrino Wireless-N1030/properties/advanced/802.11n bandwidth 2.4, i have to choices 20 MHZ and auto. I marked AUTO. With few words i lost the 40MHZ choice. At this moment my DELL is not 40MHZ capable, and Idon't know why.
My Router is Linksys X1000 N300 with ADSL2+Modem and marked AUTO (20MHZ or 40mhz)
Relevancy 50.31%

i thinking about to buy a tplink 300mbps router but there is a littile confusion is can i run wifi without turn on my pc in tp link 300mbps router

A:can i run wifi without turn on my pc in tp link 300mbps router

but there is a littile confusion is can i run wifi without turn on my pcClick to expand...

can you explain what specifically you wanted to do

The router will broadcast a wireless signal - enabling any device to pick up and use the router to access the internet, providing the router is connected to an internet service.

Nothing to do with your PC
The PC is just another device that can connect to the wireless broadcast by the router
But the PC will need to be switched on to do that
Other devices can continue to use the router , even with your PC off
Relevancy 50.31%

I bought a cheap, unbranded wireless adapter off the net, the chipset for which is REALTEK 8191.

The specification states - Data Rate: 802.11n up to 300Mbps (downlink) and 150Mbps (uplink).

Whenever I look at the status of the device, it either reports a speed of (more often than not) 135Mbps, or occasionally 150Mbps; yet a Netgear WNA3100 adapter that I have can report speeds of up to ~280Mbps when connected.

Is it likely that this Realtek adapter isn't really a 300Mbps device?

Thanks for your thoughts.

A:Is this Realtek wireless adapter really a 300Mbps device?

Manufacturers can play a lot of games with performance specifications. They specify 300Mbps but that would be achievable only under ideal conditions not normally seen in the real world. And as this is a cheap unit the specification may be highly optimistic.
Relevancy 48.16%

Maxx: Ok you've unleashed the cloning tool on how about helping others learn to resize, recolor and blend easier. I love the cloning's opened up a whole new world for me! Thanks again! Take care. angel

A:Hey Maxx...More Tutorials Please!

???? marlene, maybe there are others here who are confused by your post. If this "cloning" tool is so awesome, share it and at least out a link into the post you are referring to!!

I refuse to search for it!
Relevancy 48.16%

For those, who like I, enjoy the occasional overclocking, might want to see this page.

This finnish site claims to have overclocked a P4 3.2Ghz to 4.911Ghz using liquid nitrogen

They are aiming for the 5Ghz mark next!!

The phrase "nutter" springs to mind!

A:Overclocking to the MAxx!

I remember on "The Screensavers", a Computer TV show on the TechTV channel here in America they did that once. (Strangest sentence I've typed in a long time!)

They overclocked a P4 to almost 4GHz I believe, using liquid nitrogen.
Relevancy 48.16%

Well I didn t actually meet the prez but thought I would share a little bit of graphics with you all This what you see all the time in the rumor mill in random There are different techniques Some people use cut and paste or met the Prez... Maxx How something similar while I like to use the cloning tool available in most graphics programs Here I am using Corel Photo Paint and the cloning tool So how does maxx meet the prez Like this First you find two suitable photos I am using How Maxx met the Prez... one I found in a Google search and one I made myself You open both photos in the program and position them like the picture below You may have to resize one or the other to get the proper scale Once I had both images at the right size I used the cloning tool to graft my face over the guy shaking hands with the prez This is done by first finding roughly the center of my face and clicking the tool so it knows that is the source You then find the center of the other guy s face and begin drawing See below I continued to overdraw my face over the other guy until it was complete At this point I wasn t real concerned about drawing too much of my photo over the other since I will be coming back with fine touches and hand drawing The main thing was to get rid of the other guy s face so all I had to deal with was background Note below how I overdrew At this point the photo of me is transferred and the original is no longer even needed Now we have some fine tuning to do though I needed to remove the overdraw that the clone tool made I did this by taking the background colors using the eyedropper tool to draw back what was lost with the clone tool This allows me to feather the edge near my face and hair Cut and paste tends to leave a noticable rough edge Below is the result after bring the background back to my head and blending and feathering OK my face is in place and the edges are clean and feathered however there is a noticable problem The lighting for the original prez picture is different than the lighting I used when I took my picture No need to panic You deal with this problem by changing the skin tones just enough to make everything blend You first pick a nice feather brush from your program list and set transparency to very high You want to tint here not paint What I did was lightly start adding pink and white tints to my face until I got to the point of losing too much detail then stopped But it still looked way too different What can I do now Well if you can t get Moses to the mountain you bring the mountain to Moses At this point instead of coloring my face more I started to change the skin tones of everybody else in the picture until it started to look more uniform Below is the final picture OK it isn t great but you get the idea I could put more time into it and make things look even more uniform but for purposes of this tutorial I think this will suffice Now you all know how Rhett and others do it LOL nbsp

Relevancy 48.16%

maxx audio pro settings and options are not being shown in dell audio application...and when i am going to install maxx audio installer file from the extracted folder of audio driver downloaded from dell support and download it is saying that this device do not support it...but it used to support previously but after updating windows it is not supported...please provide the solution
Relevancy 48.16%

A friend ask me for help with his pc, being a seasoned IT pro I said no problem, but this one is kicking my butt. Combofix is reporting the pc has a rootkit, I do not know if it is a false positive or if it is acutually infected. Before I got it,Dell walked the End User trough a bios Upgrade. Here are the steps that I have performed to date:

Replace Hard drive
High level format of the old and New replaced drive
reinstalled Xp Pro

Could the rootkit be embedded in the BIOS?
Combofix reported that the rootkit.ZeroAccess! is inplace even before Internet access, Apps, and data restored

Nothing but combofix is reporting the rootkit, Tried Malwarebytes, super antispyware, Trend Micro Titanium, Kaspersky
Attached are the logs
Any help would be appreciated!

A:Maxx ++ rootkit

Hello there,

Welcome to Bleeping Computer.

Do you happen to have the ComboFix report?

Relevancy 48.16%

Started the attached http www bleepingcomputer com forums top ml entry in another Maxx++ rootkit topic forum and have been asked to start a new topic here with the log pasted below Need assistance with removing the malware id'ed above Many thanks in advance --oOo--Running from C Users Ben Steen Desktop Win kDiag exeLog file at C Users Ben Steen Desktop Win kDiag txtWARNING Could not get backup privileges Searching 'C Windows' Found mount point C Windows AppPatch Custom CustomMount point destination Device max Found mount point C Windows assembly NativeImages v Temp ZAP DF tmp ZAP DF tmpMount point destination Device max Found mount point C Windows assembly NativeImages v Temp ZAP A tmp ZAP A tmpMount point destination Device max Found mount point C Windows assembly NativeImages v Temp ZAP C tmp ZAP C tmpMount point destination Device max Found Maxx++ rootkit mount point C Windows assembly NativeImages v Temp ZAP A tmp ZAP A tmpMount point destination Device max Found mount point C Windows assembly NativeImages v Temp ZAPE tmp ZAPE tmpMount point Maxx++ rootkit destination Device max Found mount point C Windows assembly NativeImages v Temp ZAPEEF tmp ZAPEEF tmpMount point destination Device max Found mount point C Windows assembly NativeImages v Temp ZAPF C tmp ZAPF C tmpMount point destination Device max Found mount point C Windows assembly NativeImages v Temp ZAPF E tmp ZAPF E tmpMount point destination Device max Found mount point C Windows assembly temp tempMount point destination Device max Found mount point C Windows assembly tmp tmpMount point destination Device max Found mount point C Windows ehome CreateDisc style styleMount point destination Device max Found mount point C Windows Globalization GlobalizationMount point destination Device max Found mount point C Windows Help Corporate Maxx++ rootkit CorporateMount point destination Device max Found mount point C Windows Installer PatchCache Managed A F FEC Mount point destination Device max Found mount point C Windows Installer PatchCache Managed A F FEC Mount point destination Device max Found mount point C Windows Installer PatchCache Managed F FEC Mount point destination Device max Found mount point C Windows Installer PatchCache Managed F FEC Mount point destination Device max Found mount point C Windows Installer PatchCache Managed F FEC Mount point destination Device max Found mount point C Windows Installer PatchCache Managed B F FEC Mount point destination Device max Found mount point C Windows Installer PatchCache Managed F A C F FEC Mount point destination Device max Found mount point C Windows Installer PatchCache Managed F C F FEC Mount point destination Device max Found mount point C Windows Installer PatchCache Managed FA F FEC Mount point destination Device max Found mount point C Windows Installer PatchCache Managed D F C A DB BE A B BE Mount point destination Device max Found mount point C Windows LiveKernelReports LiveKernelReportsMount point destination Device max Found mount point C Windows Microsoft NET authman authmanMount point destination Device max Found mount point C Windows ModemLogs ModemLogsMount point destination Device max Found mount point C Windows nap configuration configurationMount point destination Device max Found mount point C Windows Panther setup exe setup exeMount point destination Device max Found mount point C Windows PCHEALTH ERRORREP QHEADLES QHEADLESMount point destination Device max Found mount point C Windows PCHEALTH ERRORREP QSIGNOFF QSIGNOFFMount point destination Device max Found mount point C Windows PLA Templates TemplatesMount point destination Device max Found mount point C Windows Registration CRMLog CRMLogMount point destination Device max Found mount point C Windows SchCache SchCacheMount point destination Device max Found mount point C Windows security templates templatesMount point destination Device max Found mount point C Windows ServiceProfiles LocalService AppData Local Microsoft Windows GameExplorer Game... Read more

A:Maxx++ rootkit

Hi Mooragh,Welcome to BC HijackThis forum. I am farbar. I am going to assist you with your problem.Please refrain from making any changes to your system (updating Windows, installing applications, removing files, etc.) from now on as it might prolong handling your log and make the job for both of us more difficult.We need to run the tool with the following command to fix some malware related changes.
Click on Start->Run, and copy-paste the following command (the bolded text) into the "Open" box, and click OK:

"%userprofile%\desktop\win32kdiag.exe" -f -r

When it's finished, there will be a log called Win32kDiag.txt on your desktop. Please open it with notepad and post the contents here.

Download ComboFix from one of these locations:

Link 1
Link 2
Link 3

* IMPORTANT !!! Save ComboFix.exe to your Desktop

Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools. (Information on A/V control HERE)Double click on ComboFix.exe & follow the prompts.When finished, it shall produce a log for you. Please copy and paste the C:\ComboFix.txt in your next reply.
Relevancy 47.73%

Hi, Maxx audio stopped working after windows 10 update. I have searched everywhere for a fix. I did find a "fix" that totally removed the Dell audio icon from control panel. Where can I find the driver to reinstall Maxx Audio? 

Operating System Windows 10 Home 64-bitCPU Intel Core i5 4460 @ 3.20GHz 29 °C Haswell 22nm TechnologyRAM 8.00GB Dual-Channel DDR3 @ 798MHz (11-11-11-28)Motherboard Dell Inc. 088DT1 (CPU 1) 28 °CGraphics DELL E2414H ([email protected]) 2047MB NVIDIA GeForce GTX 750 Ti (EVGA) 29 °CStorage 931GB Seagate ST1000DM003-1ER162 (SATA) 32 °COptical Drives HL-DT-ST DVD+-RW GHB0NAudio Realtek High Definition Audio

Relevancy 47.3%

I'm usually pretty good antiviruses rootkit prevented using from Probably Maxx++ at bug fixing but this one is a real pain Cause - tried downloading a movie online not sure what the site wasEffects -Spybot has become a read-only file and is impossible to use When I reinstall under a different name in a different folder it works until it is about to scan then shuts itself off and becomes another read-only file The hidden scr file cannot be located Clicking on unprotected links will redirect to random advertising websites like mom com and other useless garbage I have massive slowdown and the computer crashes all the time I tried downloading AVG and it located the viruses and trojans said they were removed and after I rebooted it was the same problem as before Except now when I use AVG is freezes up when it's about to scan the infected files I could really use some help on this one Can't seem to get anything working Whenever I download hijackthis it shuts down too quickly for me to make a copy of the log I will however most my gmer and win diagAny help would be appreciated I've been stuck on this all day and I can't take it anymore I'm about to give up and have geeksquad do it for me for bucks GMER - http www gmer netRootkit scan - - Windows Service Pack Running gmer exe Driver C Probably Maxx++ rootkit prevented from using antiviruses DOCUME CARLGR LOCALS Temp fwryrpod sys---- System - GMER ----SSDT sptd sys ZwCreateKey xF E B SSDT sptd sys ZwEnumerateKey xF C SSDT sptd sys ZwEnumerateValueKey xF BEC SSDT sptd sys ZwOpenKey xF E SSDT sptd sys ZwQueryKey xF CC SSDT sptd sys ZwQueryValueKey xF B SSDT sptd sys ZwSetValueKey xF D ---- Kernel code sections - GMER ---- C WINDOWS system drivers sptd Probably Maxx++ rootkit prevented from using antiviruses sys The process cannot access the file because it is being used by another process text Probably Maxx++ rootkit prevented from using antiviruses USBPORT SYS DllUnload F AC Bytes JMP C B win k sys The system cannot find the file specified win k sys The system cannot find the file specified ---- User code sections - GMER ---- text C WINDOWS System svchost exe USER dll CallNextHookEx A E B Bytes CALL D globalroot Device max gt BB D A x dll text C WINDOWS System svchost exe GDI dll GetHFONT F EA Bytes CALL DC globalroot Device max gt BB D A x dll text C WINDOWS System svchost exe GDI dll GetTextExtentPoint W E F Bytes CALL DDE globalroot Device max gt BB D A x dll text C WINDOWS Explorer EXE GDI dll GetHFONT F EA Bytes CALL DC globalroot Device max gt BB D A x dll text C WINDOWS Explorer EXE GDI dll GetTextExtentPoint W E F Bytes CALL DDE globalroot Device max gt BB D A x dll text C WINDOWS Explorer EXE USER dll CallNextHookEx A E B Bytes CALL D globalroot Device max gt BB D A x dll text C Program Files Mozilla Firefox firefox exe GDI dll GetHFONT F EA Bytes CALL DC globalroot Device max gt BB D A x dll text C Program Files Mozilla Firefox firefox exe GDI dll GetTextExtentPoint W E F Bytes CALL DDE globalroot Device max gt BB D A x dll text C Program Files Mozilla Firefox firefox exe USER dll CallNextHookEx A E B Bytes CALL D globalroot Device max gt BB D A x dll---- Kernel IAT EAT - GMER ----IAT WINDOWS System Drivers SCSIPORT SYS ntoskrnl exe IoConnectInterrupt F sptd sysIAT pci sys ntoskrnl exe IoDetachDevice F C sptd sysIAT pci sys ntoskrnl exe IoAttachDeviceToDeviceStack F ACAB sptd sysIAT atapi sys ntoskrnl exe IoConnectInterrupt F sptd sysIAT atapi sys HAL dll READ PORT UCHAR F EABA sptd sysIAT atapi sys HAL dll READ PORT BUFFER USHORT F EC sptd sysIAT atapi sys HAL dll READ PORT USHORT F EB sptd sysIAT atapi sys HAL dll WRITE PORT BUFFER USHORT F F E sptd sysIAT atapi sys HAL dll WRITE PORT UCHAR F F sptd sysIAT SystemRoot System DRIVERS i prt sys HAL dll READ PORT UCHAR F B A sptd sys---- User IAT EAT - GMER ----IAT C WINDOWS System svchost exe C WINDOWS system kernel dll ntdll dll NtWriteFile A globalroot Device max gt BB D A x dllIAT C WINDOWS System svchost exe C WINDOWS syste... Read more

A:Probably Maxx++ rootkit prevented from using antiviruses

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for posting the results.Close the program window, and delete the program from your desktop.Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet. Information on A/V control HERE
Relevancy 47.3%

I just got a Rage Fury Maxx 64 off Ebay. Works great no prombles. But I was wanting to know if anyone has ant setup tips for this card & setings will be helpfull THANKS
Relevancy 47.3%

I am not using 5.1 or 7.1.  I just have a  two speaker system (with a woofer).
Does Wave Maxx help improve sound quality or can I disable the app/service?

A:Is Wave Maxx helping my xps 8900 ?

Doing so will disable sound.
Relevancy 46.44%

My friend leaning towards to have a Droid Razr Maxx recently because she has special favor to Motorola probably first mobile phone she had but I am feeling that Maxx life About Razr & size battery the screen size is a bit of a double About Razr Maxx size & battery life edged sword because she is a BB user now familiar with the Qwerty keyboard The larger screen About Razr Maxx size & battery life creates a fantastic visual experience when browsing but I m guessing she will not used to it She also feel like the larger screen and keyboard along with swype will be easier to About Razr Maxx size & battery life get over the lack I do not know much about this model though I owned a doridX so I wander if it was a bit big and have you gotten used to its size over time And also I heard that its battery life last long and have no idea whether it is true My droidX indeed have an impressive performance before even if I unplugged the phone off the charger at am not to put it back on the charger before I crashed out at night and woken up next day the battery still at about Through one day I kept the wifi was on all day I played an hours worth of home run derby I watched a few you tube videos surfed a little net and I have all my accounts synced up tofacebook myspace yahoo hotmail google and twitter I also have a live wallpaper running In the end I my battery never hit the quot red quot and was a little over hours of battery life before I put it on the charger I recommanded droidX to her but she wants a more recent model nbsp

A:About Razr Maxx size & battery life

Why don't you install a larger memory card?
Relevancy 46.44%

i have a inspiron 15 3543 with maxx audio . After win 10 upgrade "dell audio" is missing from control pane. i need it very much

A:dell maxx audio softwre needed

Please check for the latest windows updates are installed. At the left bottom of the taskbar, please click on windows logo key,Settings, and then Update & Security.Install any available updates and restart your PC if required.  
I also like to suggest you type Dell Audio onto the (Cortana) search bar, hopefully you'll see Dell Audio(control panel).
Relevancy 46.44%

Hi friends
I'm using dell 15 inspiron 3521 running in windows 10. I resetted my pc due to software issue, but after resetting all drivers were uninstalled . So I reinstalled all drivers according to order suggested in the following website
After installing all diver I came to know dell wave maxx 4 audio is missing . How to get that back? Someone help me in this to solve the issue.

A:Dell audio wave maxx 4 is missing

Hello. WavesMaxx is bundled with the Realtek audio driver. Whether you have any WavesMaxx at all, or whichever version you get, depends on the audio driver that is installed. You can see all of the Realtek audio drivers that Dell has released on the Inspiron 3521 html page.
The ones for Windows 10 are WT. The ones for Windows 8.1 are WB.
If you know which version you had before, install that one. If not, go through them one by one until you get the features you are looking for. If you try to install an older driver, you have to completely remove the newer driver first.
1. Open the Device Manager (find it in the Control Panel, or type devmgmt.msc into the search box).2. Expand the "Sound, Video & Game Controllers" section.3. Right click on "Realtek High Definition Audio". 4. Click "uninstall."5. Put a check mark in the option to delete the driver software, and then ok.6. Restart the laptop. Because you removed the Realtek driver files, Windows will install its native audio driver, named "High Definition Audio Device". 7. Go back to the Device Manager and look for "High Definition Audio Device". If you see "Realtek High Definition Audio" again, that means that there was another version of the Realtek driver on your hard drive, and Windows found and installed it. So  keep uninstalling & restarting until Realtek no longer appears under Sound...Controllers and "High Definition Audio Device" appears in its place. At this point you can install an older Realtek driver.
If you try to install a driver meant for a different operating system, it might install okay, but generally you should use compatibility mode.
1. Download and save the audio driver to your desktop or any convenient location on the hard drive.  [If there are two "formats" on the driver's page, scroll down to the 2nd one, named "Hard Drive" format, and download that one, not the 1st one named "Windows Update Package".]2. Double click on the new folder to extract (unzip) the driver files.3. The extractor wizard will create a new folder for the driver files. It will be at "c:\dell\drivers\xxxxxx". Write down the exact location that the wizard creates. 4. If the driver begins to install automatically, halt (cancel) the installation.5. Browse to the driver files on the hard drive (the location you wrote down).6. Find the "setup.exe" file.7. Right click on setup.exe to open the context menu.8. Select the Properties.9. Select the Compatibility tab.10. Check the box "run this program in compatibility mode for".. whatever Windows the driver was meant for.
Relevancy 46.44%

i have a inspiron 15 3543 with maxx audio . After win 10 upgrade "dell audio" is missing from control pane. i need it very much
Relevancy 46.01%

i have upgraded my dell XPS 15 (L502x) from windows 7 to windows 8....but one of the best feature of Sound WAVES MAXX AUDIO 3 DRIVER IS NOT ABLE TO INSTALL PLEASE SOLVE THIS PROBLEM


Welcome to the Community.
Please download and install the driver by clicking the link mentioned below:
Thanks & RegardsManshu S#iworkfordell
Relevancy 46.01%

Hi all,
I managed to install windows 8 onto my dell 15r se - A clean installation. Downloaded all the needed drivers and my laptop is working perfectly fine in windows 8. However I overlooked the fact that Wave Maxx Audio 4 will be gone! How can i have it back? I cant find this software anywhere on my dell download, drivers, etc.
I called dell singapore and they said they cannot install it back for me because it is a third party software.
I'm just curious that one of the quicklaunch button is meant for MaxxAudio and even has its logo on it. So why not the software for us to download?
How can i have back this software? I have a windows 7 recovery disk though. Can i get it back through it?


A:Wave Maxx Audio 4 gone with clean windows 8 installation.

Hi Jlkit,
I suggest you to reinstall the audio driver for Windows 8 from the following link:
The Wave Maxx Audio software must be restored. However, if you are unable to find the software after driver reinstallation, it means that the software is not compatible with Windows 8. You will have to purchase a copy that is compatible with Windows 8 from the following link:
I hope the information provided is helpful.
Relevancy 46.01%

I've reset win 10 in recovery and now there isn't have dell audio =( how can i get it back

A:how can i get back maxx audio on my Laptop latitude 5450

Hello. It is part of the Realtek audio driver, so try downloading & installing it.
Relevancy 45.58%

Good afternoon!

With my PC Dell supplied Audio! The program worked very well on windows 8.1, but today it's upgrade to windows 10 and the program has stopped working! Rather, it runs, but works partially (screenshots). Please help, what do I do? (My computer: DELL XPS 8700)

A:XPS 8700, Windows 10, Realtek Maxx Audio Pro features missing?

Here is how to fix the problem and go back to your old Realtek HD audio driver on the XPS 8700.  This will restore the Maxx Audio Pro feature.
* Open the Control Panel and select System* Click on Advanced System Settings (on the left)* Click on the Hardware Tab* Click on "Device Installation Settings" and then click on "No, Let me choose what to do" and "Never install driver software from Windows Update". Click Save Changes. This step is important or else Windows Updates will always write over the Windows 8.1 driver* Open the Control Panel- Programs and Features and select the Realtek Audio Driver and uninstall it* Restart the system* Install the Windows 8.1 Realtek audio driverXPS-8700_Audio_Driver_N4TKF_WN_6.0.1.7016_A00.EXE* Restart the system. Be sure to select your Realtek Audio as default audio device if you have more than one device on your computer
This worked for me.  Let me know if you have any questions.
Relevancy 44.29%

Hello there Recently setup my home wifi network i had been noticing that my link speed to any device through my Dlink DIR router was always Mbps as reported by the device i searched around that i should set the channel width to 'auto mhz' to gain speed however now link 150Mbps windows DIR 300Mbps, reports at reports 615 that i did that the link DIR 615 reports link at 300Mbps, windows reports 150Mbps speed increased but only to Mbps as seen in the screenshot attached I could live with it but when i check the router's wireless status page it reports the link to be 'M' which hopefully stands for Mbps as it should be sometimes its at M as well but it always reports double of what windows and other devices like my android phone report i'm having a hard time figuring out whats going on with my setup i've checked for interference but there are hardly any other wifi networks in range Some more misc info about my setup I use a Dlink Nano N adapter with my desktop which was recommended for use with the router Using WPA -AES PSK running the router in WPA only wireless N only mode Generally receiving full bars throughout my home Why is there a conflict in the link speed info displayed on my devices and the router Thanks

A:DIR 615 reports link at 300Mbps, windows reports 150Mbps

Some more details, i installed the crappy dlink software to obtain more information about it and surely got soemthing out of it.
In the attached screenshot, its written Tx/Rx:150Mbps/300Mbps...which basically means its transmitting at 150M, hence what it shows in Windows, which leads me to the question, why?
Relevancy 41.28%

It appears I m not the only one with this issue I am using an Inspiron R laptop that came with Audio Windows 10 Issues "upgrade" with after Maxx Windows After upgrading to Windows I ve noticed a couple of things In Dell audio my Waves Maxx Audio works but I am missing all of my presets in the EQ and I am Issues with Maxx Audio after Windows 10 "upgrade" actually not able to adjust Issues with Maxx Audio after Windows 10 "upgrade" ANY settings at all I have called Dell times now resulting in a total of hours on the phone where they had me uninstall and then download and reinstall the Realtek audio driver After downloading and installing times the EQ presets came back but I am still unable to do anything else within the program I have noticed after the first time that updating the driver causes the error with Maxx Audio So the second time I reinstalled I did NOT update the driver but I am still unable to make any changes in the program This is very frustrating because I record music and mix the final product with my laptop The nd issue I have will have to be directed in a different forum as it has to do with my laptop not waking from sleep mode Any help with the audio issue would be very much appreciated

A:Issues with Maxx Audio after Windows 10 "upgrade"

I solved this issue by first downloading the latest Realtek audio drivers from Dell. For my XPS15/M3800 it was Realtek ALC3661 Audio Codec version,A00. This is a 325MB download. After installing this and going through 1 or 2 reboots, my Dell Audio Sound Manager was restored but all MaxxAudio presets were missing. To fix this, I opened the Device Manager-->Sound, Video, and Game Controllers the right-clicked Realtek High Definition Audio and selected Update Driver Software. I chose to search automatically for updates. Windows found an updated version, installed it, rebooted, and then my presets were restored.
Relevancy 41.28%

Hello XPS Owners Some help please i have my new dell xps l x and the QuickSet cant launch waves audio maxx I already reinstalled QuickSet and works but when i restart my xps waves maxx audio touch key dont work I already try with official dell drivers realtek official last driver and by (Waves Audio Dell QuickSet Maxx Audio) Fix And Realtek the problem continue I have to run manually the Dell Audio Realtek waves maxx audio and the icon appear in notification system tray rigth down corner i check msconfig-startup and the realtek procces are enable Every time i turn on my computer i have to manually run Dell Audio as administrator and the screen of Audio Dell by Realtek appear Any ideas or a guide QuickSet And Dell Audio by Realtek (Waves Maxx Audio) Fix to solve this problem I paid for a system with that kind of problems basic drivers So bad and fan start everytime doing normal stuff when gaming it gets hot i hope its normall but i will need thermal paste in my left arm I search al lot but cant find a solution only i try drivers but the problem continues Please help me and sorry for my english Bye

A:QuickSet And Dell Audio by Realtek (Waves Maxx Audio) Fix


Did you recently install/reinstall the operating system?

Start, control panel, Windows mobility center. Make sure the function row is set for multimedia key.

Relevancy 40.85%

My laptops sounds gone very bad after maxxaudio is gone. Low bass etc. It's happen after upgrading my windows 8.1 to windows 10
Where i can get my wavemaxx audio again ? i tried installing newest realtek audio driver but nothing works. 
I've dell inspiron 5437 14R. please help bring me back my waxemaxx audio.

A:waxe maxx audio gone missing after windows 8.1 to windows 10

martinismsWhere i can get my wavemaxx audio again ?
There is no separate download for it. The only way to get it is through installing a Realtek audio driver.
martinismsi tried installing newest realtek audio driver but nothing works. 
If you installed this Realtek driver and still cannot find WavesMaxx in the Control Panel or anywhere else on the laptop, then remove that driver and try a different one. You have to completely remove it.
Open the Device Manager and expand the Sounds Controllers section. Right click on the Realtek and select to uninstall. Put a check mark in the option to delete the files, and then ok. When you reboot, Windows will either install its own native driver or a Realtek driver if there were any other versions on the hard drive. So go back to the Device Manager and check for a Realtek driver. Keep uninstalling & rebooting until Realtek no longer appears under Sound Controllers and "High Definition Audio Device" appears in its place.
Then you can try to install this Realtek driver for Win8.1. If it will not install at first, then try it again using Windows compatibility mode for Win8.1.
[Note that both of the drivers above are for 64-bit Windows, so if you have Win10 32-bit they might not work for you.]
If neither of those drivers get your WavesMaxx back then you might have to revert back to Win8.1 if you need to get it back.
Relevancy 36.98%

Dear everybody! I'm going to buy more 8GB Crucial ram for my laptop. Currently i have 4GB. So i will have 12GB ram total. So Could anyone give me some advices about this. Is it ok ? Is it compatible with my device ?  Thank you.  

A:HP-Pavilion-17-f100-Notebook-PC-series - HP Pavilion Noteboo...

@0xaddr? Memory Supports the following configurations: ? 12288 MB (8192 MB×1+ 4096 MB×1; not supported on computer models with a 32-bit operating system) Your manual here. REO
Relevancy 36.98%

The sound on my notebook works fine until I connect it via HDMI to an HP Pavilion 24xw monitor.  Then the audio disappears.  If I disconnect it, the audio comes back. I have tried going to the 'Sound' section of the control panel.  There are two options:Speakers Realtek High Definition Audio HP 24xwThe default is Speakers Realtek.  When I use the test facility my notebook plays the test sound.  I have updated to the latest version of the driver. Can someone help with why when plugging in the monitor the audio disappears from my notebook? Thank you so much!
Relevancy 36.12%

I have a Genuine Microsoft DVD DV4 not does ... Pavilion internal Pavilion UEFI show dvd using for Windows When I put the Bios in UEFI boot mode It does not boot from the DVD or Pavilion DV4 Pavilion using UEFI does not show internal dvd ... if i use a USB bootable stick nbsp formatted using APT format When I hit esc on boot and select the boot devices to boot from nothing is shown nbsp If nbsp I let it just try to boot it give me a message that no bootable image on hard disk It is a new hard nbsp When I put it in legacy support mode it will boot either the USB or the internal DVD but I want to use UEFI and the new APT format for security What device can you buy so this laptop nbsp will boot something that is portable media on this bios nbsp It came with this format on the original hard drive with windows nbsp Thanks Buford nbsp HP Pavilion DV - cl with INSYDE F bios from latest update
Relevancy 36.12%

Hi, I just bought 2 laptops today and wanted it to be in Windows 7 64 bit instead of Windows 10.May I know where to get the Winows 7 drivers?I had tried to search around but I couldn't get Win7 driver.Can you provide me? The laptops I just bought are:HP Pavilion 14-ab175TXHP Pavilion Notebook - 14-ab161tx
Relevancy 36.12%


a simple question......will a HP Pavilion 15-n034sa motherboard fit into a HP Pavilion 15-n083sa ?

help me obi-wan youre my only hope!!


A:will a HP Pavilion 15-n034sa motherboard fit into a HP Pavilion 15-n083sa ?

Actually that's a hard question, generally its not possible to install another motherboard, sometimes it is. In this case one is an AMD platform and the other is an Intel platform, there could be tons of differences in mounting holes, physical design, clearance, connectors, heat dissipation requirements, cooling systems, etc. Laptops are not like desktops that use more standardized designs.
Relevancy 34.83%

My HP Pavilion 500-205t was destroyed by a lightning strike. The HD is o.k. I have purchased an HP Pavilion 500-490 because the specs were very close.  I  want to use my 205t HD. Both computers are Core i3-4130, have 1 TB 7200 SATA 6G 3.5 HDs, same OS (Windows 7 Pro 64). My question is:  can I swap them out, or do I need to get an external HD enclosure and copy the 205t to the 490? If I need the external HD enclosure, looks like aluminum would be best, but would like recommendation for one which would hold my HD.
Relevancy 34.83%

I would like to connect my HP Pav 23-1010t All in One Desktop to my HP Pav dm4 laptop.  For the purpose of switching between the two, using the HP Pav 23 video/monitor, keyboard and mouse to control what is on the laptop.  Will a KVM switch work?  Or some other swtich or cables?
Relevancy 26.23%

Hello everyone Any information that might help will be greatly appreciated I have a H P pavilion n with windows xp I bought it new but never got a system recovery disk It has a secondary hard drive that stores all of the system recovery stuff Whenever I had any problems before I have used it and it worked great to totally toast the comp back to how I H,P Pavilion help, Please got it The problem that I am having is my son got some kind of bug on it where it wouldn t do anything SO I bought and tried to put H,P Pavilion help, Please in vista but it didn t work so I bought win XP and it installed so the comp works fairly well but nothing that was installed from H P isn t there The secondary hard drive that has all of the recovery stuff is still there but their is no way to get to it What can I do With what I spent on vista and a new xp I could of bought a new cheap comp but I like this one It does or did everything that I would like it to do but now it don t Please help in any way that you can Thank you for your time Sincerely Dave

A:H,P Pavilion help, Please

Hi .You can:a. Contact HP for recovery/restore disks, Buy same from commercial outlets,;oq=&aqi=Louis
Relevancy 26.23%

working on an hp pavilion (no time limit)
specs:windows xp,80gb hdd,1.86ghz,1024mb system memory
problem is that when it boots desktop comes up but no icons no start menu and you cant in put any controls, nothing happens when you hit Ctrl+Alt+Del in any mode and no last know configure ration. Hard drive checks out ok when i ran the test from the computer but tried a hdd test from ubcd(Ultimate Boot CD) and it did not even see the hdd the problem has been this way for 6 months or so I'm told and they said it just happened when they went to turn it on one day so as all ways any help is much appreciated

Relevancy 26.23%

My Hp says this, what do I do ,??  Hp Battery alert  The system has detected the storage capacity of the battery stated below to be very low. For optimal performance , this battery may need to be replaced   primary < internal > battery ( 601)  please help me me I work from home and no computer is not good lol.. Than you in advance 

A:Help,!! Hp pavilion dv6 -6c 11 nr

Hi, The error 'Primary (internal) Battery (601)' does indicate that your notebooks main battery ( not the cmos battery as the error tends to suggest ) is showing signs of wear and you may want to consider replacing it - the 601 error typically occurs when the storage capacity has fallen below 25% of its original value. Further information on this can be found on the following HP document. This is a warranty item, so if your notebook is still covered, contact HP and arrange to have it replaced - If needed, you can check your warranty status Here. If you live in the US, contact HP Here. If you are in another part of the world, start Here. Regards, DP-K
Relevancy 26.23%

HI, I have a HP pavilion g6 laptop and the original charger given to me by the company has melted causing damage to property as well. i can't seem to find the official email address or contact number of the company. What should i do and who should i contact? i apologize if i posted this question in the wrong board. I couldn't find the one appropriate to my issue. edit: I am from India.
Relevancy 26.23%

My wife's HP Pavilion has hit the bunk, or so it seems.

It's a four year old laptop, which has been suffering from serious spyware problems for a while. Before it quit, I ran Panda active scan on it, and it detected 200+ malware infections. When I tried cleaning out Temp. Internet files, cookies, etc., IE would freeze and not respond.

Then - the mouse quit on logon. So, I thought, I've had it, time to reformat and reinstall manufacturer software. Which I did, only to find out that on boot-up mouse and keyboard both refused to respond. Not good.

Ran the diagnostic utility, which said something about RAM being set wrong, and then point out some non-specific "board problem".

Does anyone have any idea what this is about, before I reach for my biggest sledge hammer and have some quality time in my backyard with this piece of junk? :suspiciou

A:HP Pavilion

download Spybot search and destroy and ad-aware.
run both.

panda anti-virus sucks. Use norton or mcafee.

consider using an alternate web browser like mozilla or firefox. They're less prone to virus and trojan attacks.
Relevancy 26.23%

Turned on my hp . The screen came on . Asked for password then went black before putting in the password. The side lights is on put no display. Please help
Relevancy 26.23%

I have been trying to help a friend update or correct her winxp on her HP pavilion w I have a copy of my winxp cd from my dell system however I dont have the product key code to use it So I have tried repeatedly to reset her computer to boot from her cdrom without success I even posted here last week and someone suggested to tap the delete key when rebooting to change the boot sequence I wasnt able to get it to work However I did accidently discover that tapping F brings up the Recover system on her computer Not knowing exactly for sure if I could just correct her winxp with recoverying Pavilion Help HP with Need the whole system I turned off the computer to stop it I have questions Can anyone tell me if the Recovery System on this HP model allows you to correct a current copy of your windows without reformatting and or Can anyone tell Need Help with HP Pavilion me Need Help with HP Pavilion how to set this Need Help with HP Pavilion HP model to reboot from the CD-rom OR How do I access the bios to change the boot sequence Thanks -------------------------------------------------------------------------------- nbsp

Relevancy 26.23%

My HP Pavilion automatically intalled the HP 15 Pavilion Windows update but it stopped my keyboard working Oddly it was possible to enter my PIN but then the keyboard no longer worked HP Pavilion 15 after the home screen appeared Using a HP Pavilion 15 USB keyboard gave the same result nbsp nbsp I removed the update and the HP Pavilion 15 keyboard worked again but I assume if I let the update install again the same problem will happen nbsp I have used the HP Supprt Assistant and installed all the updates but the BIOS update will not go away It looks like the BIOS update is not supported for this model nbsp The currnt BIOS is F The latest is F nbsp I tried to make a USB flash drive after identifying my System ID as but when selecting the BIOS file to install bin is not listed The only ones available are D bin bin A bin bin and bin nbsp My question is where can I get the BIOS update file to match my Syetm Board ID and will updating the BIOS enable me to run the Windows update
Relevancy 26.23%

Hello,I have HP Pavilion dv7 3150EQ. Recently i bought bluetooth speaker JBL Charge 2+. I have problem to connect the speaker with HP. The driver is not working.Please, help me!Thank you in advance!Best Regards,Dimitar
Relevancy 26.23%

Hello everybody I have a problem with my notebook, when I try to turn it on I find screen black with line up on the left. I tried to do bios and stuff and it says bios recovery (500) I press enter and still on the same black screen nothing changes. Sorry for my english first of all and can somebody please help me?
Relevancy 26.23%

I was about to do a restore on my computer today. I restarted my computer and hit the F10 key like always, but nothing happens, the computer just restarts. I tried it repeatedly with the same result. I went back to my computer and seen that the restore partition is still there can anyone tell me why I cannot get my restore working? Is there a way around this I mean is there another way to activate my restore?

Relevancy 26.23%

Laptop fell off of bed onto carpet. Video display had blue lines. When touching the monitor it corrected itself. However, later the display wouldn't show. The computer would turn and I could hear the startup sound. Attached to a external monitor and it worked. Then I updated the AMD Graphic Drive and restarted the computer. Won't show on the external monitor and no startup sound. Can hear the fan. Removed the RAM and powered up the computer and heard the mother board beep. What's wrong with my laptop.

A:HP Pavilion dv7

Hi @Kaimeha26, Welcome to the HP Support Forums! It is a great site for information and questions. I read your post about the laptop dropping to the carpet from the bed and now has display issues. A commendable job was done, by hooking up the unit to an external display and removing the RAM modules and checking.I'll be glad to assist you. It is always a privilege to work with a tech savvy expert like you. Because of the drop, it certainly looks like the notebook has developed a hardware issue. It needs to be serviced. You could check the warranty of your unit by visiting this link: you can contact phone support to get the unit serviced by visiting this link: Thanks for being a part of the HP community. Please let me know if this helps, and if it does please mark this post as an ?Accepted  Solution?. Kudos would also be appreciated for my efforts to help. You could simply click the ?Thumbs Up? button.Thanks and have a terrific week ahead.
Relevancy 26.23%

HelloI'm having trouble printing from the internet.  I am able to print from windows documents, but can't print from internet sites and email.  Can you help me?
Relevancy 26.23%

Can someone please tell me if the Pavilion 500-214 is a business or consumer machine?  I have looked at the website for a while and I can't seem to find the answer to this question. Thanks!


Hi: Pavilion is the consumer line of HP desktops and notebook PC's. The business line of HP desktops are the Prodesk or Elitedesk models.
Relevancy 26.23%

Here is my HP Pavillion Computer Info---------------------------------------------System:Microsoft Windows XPHome EditionVersion 2002Service Pack 1Hewlett-Parkard Pavilion Intel®Celeron® CPU 1.80GHz1.79GHz248 MB of RAMMy Computer only has like 16-20gb---------------------------------------------Im looking foward to buying a new Hard Drive so i can increase my GBs, and my question is can someonehelp me find a good hard drive that is atleast $100-$150 and that is decent GB Storage for this . Im a newbie atcomputers and i want help.

A:Hp Pavilion

I'm a little confused by what you said, "My Computer only has like 16-20gb". How big is you HDD? Anyway, go to they have some of the best prices and customers give reviews on the items so you can get a better idea of which one you like. Seagate is a well respected brand. I use Maxtor a lot, a lot people don't like Maxtor but I've never had any problem with them.
Relevancy 26.23%

My friend got this hp laptop off of someone he had a problem booting up always wanting to enter power on password I thought I could bypass it by trying to put windows 7 on it I can't even boot from dvd rom without it asking for the power on password the error code I get is system disable 87594752 I found an post about it but I couldn't find where to post a message at I hope someone can help me I don't have much time to figure out how to get passed it 

View Solution.

A:HP Pavilion

Hi: Enter this unlock passcode... 38492394
Relevancy 26.23%

Just purchased hp pavilion 15, how long does it take for everthing to upload? Started the express choice about 2 1/2 hours ago and the screen still says just a moment. Can you help, please?
Relevancy 26.23%

pls help i forgot my admin password how can i removed?theres a number show 63324160

A:hp pavilion

Your question has already been asked and answered. See your other thread.
Relevancy 26.23%

Good Afternoon,
Would like to pose this question and see if any of the group can assist me.

I currently image our new CPU's with a secure image of Windows XP Sp2. Our computers (desktop and laptops) mainly consist of Dell's and images work fine thanks to our information management staff. However, our director has an HP Pavilion dv8000 notebook that I cant get an image to take on it. It just goes into a cycle of choosing safemode or boot normal.

The weird thing is, I have an option at the start of the image to choose "network" or non-network (stand alone) and the stand alone image works fine.

Are they any settings on this HP that I need to turn off or on for the network image to work?

Thanks in advance
Relevancy 26.23%

Let me ask: How to adjust the microphone is available in laptops

A:Hp Pavilion G4

Dear Customer, Please go through the below doument, see if its helpful:   Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee
Relevancy 26.23%

Hi,I need to replace the fan on my Pavilion G6 but cannot find any information regarding part no. on the HP site.I have entered the serial no. and product  no. on the online system and it does not find any info. Not sure whether I should or should not post serial and part numbers here but can forward these if required. Any help or advice on where or how to find the correct part would be appreciated.Many thanks in advance

A:Pavilion G6 fan

Hi, Part number is   639460-001. You can find it on page 22 of the Maintenance and Service Guide on the following link: You can buy from HP shop: or from Amazon: Regards.
Relevancy 26.23%

I have a problem with my hp pavilion laptop when i put it on AC charging the white light blinks not charging

A:hp pavilion

Model number? How old is the battery and the laptop?
Relevancy 26.23%

Hi guys! Where can I see the exact name/model of my laptop?!?Thanks


 Hi, Check the following link: HP Notebook PCs - How Do I Find My Model Number
Relevancy 26.23%

I have a hp pavilion n5420 laptop with win xp operating system. Now when i turn it on nothing happens no screen except loud beeps from the speakers

A:hp pavilion

do the bleeps have any pattern
the BIos will give a series of bleeps depending on the startup tests
typically pattern of short and long beeps
Relevancy 26.23%

Hello, i Have a HP Pavilion dm4 if i plug the changer to the board retun light back. i need your support
Relevancy 26.23%

hey, i've had a hp detachable pavilion x2 for a week or so, it came with 8.1 on it and i wasn't going to upgrade to 10 but thought sod it and upgraded earlier and now my mouse touchpad randomly stops working, the mouse pointer disappears and the keybooard stops working, i have to use an on screen keyboard and use the touch screen to get around

it says it is a ELAN touchpad, i've spent over an hour now googling this issue. all signs are pointing to it being a driver issue after a windows 10 upgrade yet i haven't seen an actual fix anywhere. can anyone point me to a link of the driver that i need please before i throw this thing into the street

elan say to contact manufacturer yet HP have nothing on their website unless i have completely missed something obvious. please help

A:HP Pavilion x2

If you go to the linked HP page and enter your product number, you should be able to find the HP drivers for your touchpad:

If there are no Win10 drivers, then you should not have upgraded to Win10, because not every HP machine running Win8.1 is upgradeable to Win10 without problems. You could have checked the compatibility on the HP site prior to the upgrade.
Relevancy 26.23%

Five months ago I bought an HP Pavilion Notebook dv us I also purchased Norton Internet Security and Spy Sweeper I kept these along with Windows XP up to date About a month ago I turned it on my Pavilion Help with HP and it said Windows did not start successfully A recent hardware or software change might have caused this If your computer stopped responding restarted unexpectedly or was automatically shut down to protect your files and folders choose Last Known Good Configuration to revert to the most recent settings that worked If a previous startup attempt was interrupted due to a power failure or because the power or Reset button was pressed or if you aren t sure what cause the problem choose Start Windows Normally Then it listed the ways to start up Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Last Known Good Configuration Start Windows Normally I made no hardware changes and the only software changes were Norton Spy Sweeper and Windows updates The last time that I had my computer on it did not stop responding or restart automatically or shut down automatically Previous start up was not interrupted due to power failure and I did not press the power button or the reset button I tried all options starting with Start Windows Normally When I did this and when I tried starting with Last Known Good Configuration Windows acted like it was going to start up and then the screen went blank power was still ok When I started in the Safe Modes the screen filled Help with my HP Pavilion with stings The first sting was multi disk rdisk partition WINDOWS system DRIVERS PCIIDEX SYS I called HP support and was told without asking me very many questions that I had a virus and that my only option was to re-image my computer I went along with it and my computer seemed to be working fine until last week it happened again I am looking for some advice on what the problem could be and please speak in layman s terms as I am not very computer literate I want to be prepared so that when I call HP they can t just get away with an easy fix If there was something wrong with my computer before I even took it out of the box I want to be able to make an argument so that HP has to fix it Thank you for your help nbsp
Relevancy 26.23%

hi just bought a lap top hp pavilion dv2530 with vista and i cant find how to activAte the built in web cam, theres nothing in the help, im a bit of a novice can anybody help?

A:hp pavilion web cam?

morgansssss said:

hi just bought a lap top hp pavilion dv2530 with vista and i cant find how to activAte the built in web cam, theres nothing in the help, im a bit of a novice can anybody help?Click to expand...

Hiya morgansssss,

Right mate do you have all the Quickplay software. If so all you need to do is goto Start, Computer, Devices, Hardware. At the top of the page you will see System Devices. Click it.

You will then see a window just like XP. Hit the hardware tab then scroll down to the USB line.

Once there you should see "USB composite device". Right click on it and choose Enable.
There will be a pause as the device is enabled.

You will then need to scroll up a little and find "imaging devices". Right click on "HP Webcam" and enable it.

That should sort it out. If not let us know.... Hope that helps. Peace
Relevancy 26.23%
Relevancy 26.23%

Unable to switch on laptop.Red light showing at plug in, but when I press on switch  - nothing happens
Relevancy 26.23%

Have a case open with HP (4776132542) in which a recovery USB Stick has been sent to me. have run the recovery process but will not complete. (error code 0xc0000225). Unable to find any email or phone link to HP to discuss the problem except possibly thru this forum. any suggestions would be great as this unit was purchased new to take on holidays overseas on 5th September inst.
Relevancy 26.23%

HP Pavilion g7 right speaker is non-functional. The issue occurred after unit was dropped. I am absolutely certain it is not driver, software or balance settings etc etc etc... Is it possible that the connection was jarred loose somehow? Both channels work through headphones.

A:hp Pavilion

Could be the connection, or something broke like the actual speaker, one of the wires, or the circuit board/adapter/plug for the speaker.

You will need to open it up and a look, no other way around that.
Relevancy 26.23%

Video- I tried installing Direct X It seemed to install fine I restarted like it asked me to and I tried installing and playing HP Pavilion Help Halo It game me a error about hardware acceleration it did the same with Battlefield giving a slighty diffrent error but basicly the same and also with a N Emulator They all gave me Direct X related errors I HP Pavilion Help went into several places can t really remember were quot to check what video card HP Pavilion Help I had and they all said quot unkown quot Audio The audio doesn t work I didn t really try anything to fix it other then HP Pavilion Help making sure everything was connected-which is it Also I don t know if this is important or not it shouldn t be but I uninstalled the defualt version of windows the PC came with mainly becuase of all the worthless it came with I figured it was just easier to re-install windows thne delete it all CD Burner I can t get the thing to work I tried Nero and CDRWIN and neither of them would burn a cd it just said no CD writer installed I was thinking maby it was a drivers problem I tried reinstalling them through the device manager section but it just said their was no drivers found nbsp

Relevancy 26.23%

Helo, I won to know if my laptop HP Pavilion X2 10-n000np suports the active stylus pen made by HP.Apriciate any answers.Thanks

A:Hp Pavilion x2 pen

Hi, Please check the following table:  Regards.
Relevancy 26.23%

I am trying to fix my granddaughter computer hp pavilion dv4-1514dx, I did reinstall windows 7 and I have al kinds of errors:
After the reinstallation of windows 7, I have this message: ?No bootable device-Insert boot disk and press any key?
When I shut the computer and reboot again I get this message:
Windows could not complete the installation. To install windows in this computer, restart the installation.?
Then I restart again and this is what happens:
Application close [info] NO HDD
Hard drive test ok
Some times the computer restarts ok but then ask for administrator password
Administrator password is Clear in the bios set up
Can you help?

A:HP Pavilion

It sounds like something went wrong during the Windows re-installation. Since it sounds like you have installation media and this is a fresh install anyway, the first thing I would do is try installing again from the Installation DVD.
Relevancy 26.23%

Hi, ny friend has a HP Pavilion Laptop and she is trying to get into my wifi. So i put in my wifi and it is 10 digits, the lest two were nembers and they wouldnt fit. We had a plan that we would playy Roblox for a little bit but now she cant! Why is this happening i need help ASAP!!!!!!!!!!!!!!!
Relevancy 26.23%

I was having some issues with my laptop being slow and randomly shutting down applications that were open. I scanned for viruses thinking that could be the cause, but none were found. I then decided to just do a total reset and erase literally everything on there. The reset got to around 62% and then it said it failed. Now my laptop will not completely turn on. It just goes to a black screen with the HP logo and then back to a black screen. Every once in a while an error screen pops up with a message saying something like CMOS checksum error. I have tried resetting it with the power button but it haven't worked. Does anyone know how to fix this? It's only a couple months old and I really don't want to buy a new one!
Relevancy 26.23%

I am trying to reinstall XP and all of the sites I've visited regarding this (Including HP) say, "From the Windows XP desktop, click Start, All Programs and then HP Tools.
I do not have that on my menu. The only thing regarding HP is the HP Share to web and Hewlett-Packard officejet software.
Where do I find HP PC tools so that I might perform HP PC SYSTEM RECOVERY ?
I've tried doing a SYSTEM RESTORE from the SYSTEM TOOLS menu and it goes through the process and then restarts only to say that it failed. Any advise would be refreshing!

A:HP Pavilion 500 XP

Closing duplicate, please reply here:
Relevancy 26.23%

can anyonr help i have a pavilion laptop and broke the ac jack off in the socket i brought a new socket on line dismantled the laptop and fitted the new socket . after reasembling the laptop i cannot get it to power up at all  any sugestions would be greatfully resieved
Relevancy 26.23%

it looks like another friend dropped off a computer that is completely messed up. its a hp pavilion 6640 or somthing like that. my friend claims it has upgraded memory but i know it came with at least 64mb. it came with win 98 on it, then was upgraded to millenium but dragged ****. i tried putting ubuntu 5.10 and 6.10( whatever the newest discs are) but it didnt work, then it made sense when i found out the specs of the machine. so is there a user friendly linux or a way to crack win 98 se? the box dosent have a "key" sticker on it so no 98 se key.

A:old pavilion

It should run ubuntu. I had a lower spec'd Pavilion with a P2 300 in it that came with 48 megs of ram. I upgraded the ram and had Mandrake 7 running on it fine.
Relevancy 26.23%

I am trying to connect my Hp pavilion dv6 6135dx to my samsung porgiato HDtv and before purchasing anything I would like to know what cable and/or converter I would need to connect them. My samsung tv doesnt have an hdmi port so I would need either composite or s-video cable to my vga port on my laptop.

A:Hp pavilion to tv

Hi and welcome to TSF possibly something like this GTMax HDMI to Composite /S-Video Converter 3RCA: Electronics
Relevancy 26.23%

I don't know what I did but it's like the FN key is always pressed. When I press the P an * appears, a 4 instead of the U and so on. I'm not sure how to disable that and my computer logged me out so now I can't get in because I can't type in my password.
Relevancy 26.23%

Hi there nbsp I want to install an M SSD in my new Pavilion laptop but I just want to be sure this for Pavilion SSD 17? M.2 will work nbsp My laptop part no is V Z AV - HP Pavilion t-ab CTO ENERGY STAR It doesn't M.2 SSD for Pavilion 17? have a touchscreen I want to install GB M PCIe x SS NVMe TLC PA for use with non-touch screen M.2 SSD for Pavilion 17? products - This part is listed in the laptop's service manual nbsp When I bought the laptop from the HP store I was only given M.2 SSD for Pavilion 17? the option of the GB SSD which was not enough for my needs so I went with the TB spinner This is why I'm not sure that the GB is compatible nbsp I disassembled the laptop and I do have a free M slot nbsp I just want to be sure this will work and that it will use the full four lanes of the PCIe bus Otherwise I'll look at a lower-cost upgrade nbsp Thanks for your time
Relevancy 26.23%

I just bought an HP Pavilion and tried to set it up.  I could not get the existing monitor to work with the new hard drive.  He new Pavilion does not have the same way of connecting the monitor that the old one did.  I had to take it apart and put the older machine back in.  Why can't I connect my monitor.  The plug just won't fit.

A:New HP Pavilion set up

Okay, we need more information from you, like... -PC model number (not just Pavilion, but the whole model number as a LOT of Pavilion PCs exist.)-Monitor model number and brand, or pictures of ports on the rear.  It sounds like you will need to buy an adaptor which is easy enough to obtain; we just need to know which adaptor to get you.

I don't run HP, I just like helping others!FX6300 / Biostar TA970 / 8GB ADATA DDR3 / MSI HD 7950 / Corsair RM850 / Sandisk U110 250GB SSD and 2x WD Velociraptors 300GB / Antec 1100 V2 / NZXT Respire T40
Relevancy 26.23%

My HP Pavilion has the intel 810 chipset. It won't give me more than 24 bit color.

I have reinstalled drivers and down loaded new drivers till I am blue in the face - to no avail.

Any hints what to do next would be appreciated.

Relevancy 26.23%

I have a client with one of these, the fan is howling pretty good, looking at it carefully it seems the PSU is riveted into the case, HP does not list it for sale seperately. Anybody know of a PSU that will fit in here? or should I just toss it and chalk it up to experience?

Relevancy 26.23%

I have a pavilion 23 -worked fine but now all of a sudden the keyboard has started playing up _ starts every newcharacter with a v - the touch screen keypad works but isnt ideal
Relevancy 26.23%

Hello nbsp I have an HP Pavilion dv that I have put windows pavilion dv4 HP on nbsp Everything is working and going great considering how old this laptop is nbsp nbsp But I do have nbsp four drivers that I am not sure to what they are nbsp Also one nbsp drivers to nbsp my USB nbsp might need an update cause periodically my mouse disconnects for just a HP pavilion dv4 second and then it will reconnect and continue to work nbsp This is the only issue I am having but I would like to get the other nbsp four drivers installed and maybe the rest updated if they need to be nbsp I would think windows would have the rest of them updated or it would HP pavilion dv4 show if they were not but being so old I am unaware if it would detect them nbsp Either way any information on what I could do to get this fixed would be greatfully appricated nbsp Here is what I have nbsp nbsp Base System Device nbsp PCI VEN B amp DEV amp SUBSYS F C amp REV PCI VEN B amp DEV amp SUBSYS F CPCI VEN B amp DEV amp CC PCI VEN B amp DEV amp CC nbsp nbsp Base System Device nbsp PCI VEN B amp DEV amp SUBSYS F C amp REV PCI VEN B amp DEV amp SUBSYS F CPCI VEN B amp DEV amp CC PCI VEN B amp DEV amp CC nbsp nbsp nbsp Base System Device nbsp PCI VEN B amp DEV amp SUBSYS F C amp REV PCI VEN B amp DEV amp SUBSYS F CPCI VEN B amp DEV amp CC PCI VEN B amp DEV amp CC nbsp nbsp And nbsp nbsp Unknown Device nbsp ACPI VEN HPQ amp DEV ACPI HPQ HPQ nbsp nbsp nbsp nbsp Once again thank you for your help
Relevancy 26.23%

Computer is running slow and I was looking to add ram.  I currently have 8GB installed (2 4GB sticks) and by all accounts, I believe that is the maximum allowed.  Looking to confirm that I am not able to boost the ram any further.  Thanks!
Relevancy 26.23%

We have purchased 5 HP Pavilion 550-132d having a windows 10 OS, we need to downgrade the OS to windows 7 32 bit because we have a system that only run up to win 7 32 bit. But unfortunately upon installing the win 7 32 bit OS, the mouse/keyboard freezes! and general 'hanging'  during installation . When we purchased the computers we are expecting that we could install windows 7 without any difficulty since windows 7 is still on the market.  Can we have a work around so that we could install win 7 32 bit on those 5 new HP Pavilion 550. We will greatly appreciate immediate response on this. Thank you very much.

A:Pavilion 550

Hi, Windows 7 drivers are on the following link: My suggestion: download HP Support Assisstant (HPSA) from the above link and install to your machines, After that use HPSA to run Updates and it will fix driver problems for you. Regards.
Relevancy 26.23%

Have a message that says A component of the operating system has expired.  With error code 0xc0000605  and is asking for recovery tools, which I dont have where can I get them????

A:pavilion 23

>  A component of the operating system has expired.  With error code 0xc0000605  ... A did a Google-search on that code.  One posting suggested that the date/time in the computer's "BIOS SETUP" was wrong, and needed to be corrected.Reboot, and enter "BIOS SETUP", and check. Another posting suggested that your computer is running a "Windows 10 Preview" version, rather than the "official" release.  Is that correct?
Relevancy 26.23%

Hello! so I recived a pop-up message on my screen that told me I was very low on memory/storage. In the settings of my laptop, it says that my laptop is using 19.2 GB of storage for "Preload". What is Preload and why does 19.2 GB's of the 19.5  total GB's of used storage consist of it? 

A:HP Pavilion

Zach, welcome to the forum. When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Relevancy 26.23%

Hello! so I recived a pop-up message on my screen that told me I was very low on memory/storage. In the settings of my laptop, it says that my laptop is using 19.2 GB of storage for "Preload". What is Preload and why does 19.2 GB's of the 19.5  total GB's of used storage consist of it? 

A:HP Pavilion

Zach, welcome to the forum. When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Relevancy 26.23%

Hi today I opened my computer and it wouldn't go past hp logo. Called hp, they advised to release the static. Did that, comp worked fine. Just went to re open comp and it's the same thing (10hrs later) tried to dispel the static and it's now not working, just the up screen. Please help!!!please note, I'm not a techie or techie minded, so any help needs to be laymans terms please. thanks in advance 

View Solution.

A:Pavilion 23

Hello @Pottumpuss, Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I came across your post about issue with the desktop not starting, and wanted to help! First, try reviewing the following document, and let me know how it goes:HP Desktop PCs - Computer Does Not Start (Windows 10,8) Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!