Windows Support Forum

# Event ID 8003, type error

Q: Event ID 8003, type error

Relevancy 100%
Preferred Solution: Event ID 8003, type error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

Relevancy 26.66%

At Computex 2015, Intel has announced Thunderbolt 3, a new iteration of the company's high bandwidth hardware interface. And for the first time, Intel has ditched Thunderbolt's proprietary connector, instead opting to funnel everything through the soon-to-be-ubiquitous USB Type-C connector.

A:Intel launches Thunderbolt 3, will use USB Type-C connector

Can I mention this is f*cking epic!

http://www.techspot.com/community/topics/intel-launches-thunderbolt-3-will-use-usb-type-c-connector.213614/
Relevancy 12.9%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 13.33%

Hello everyone,
One fine evening while watching a movie, my laptop stopped responding and in frustration I switched off the laptop by holding the power button long enough to turn off. Next Morning it showed a blue screen and a message to recover my windows, which I failed to do and by the afternoon this message showed up. Detection Error on HDD0 (main HDD) and hence forth I've been unable to install windows from a USB drive since ( and I suppose) it is not able to read my HDD. I do not care about my data at all, I just want my laptop up and running. If I can have the data back it will be perfect otherwise I don't mind not getting my data back. I know for a fact that my Hard disk is fine because I went into command prompt, diskpart , and list disk, and saw the status of HDD as healthy, this is after the error (detection error on HDD). SO my question is: Why this error? IS there a problem in the motherboard? Why the error shows once and then doesn't show the next time and then comes up again.

A:2100: Detection Error on HDD0 (Main HDD); Lenovo Thinkpad Yoga

The error might be bad sectors, but I'm not sure. if my guessing is correct, you might have to get a new drive to replace. also you need to reinstall OS

Relevancy 27.09%

It's been years in the making but USB Type-C finally made its grand entrance this past week on Apple's new MacBook and Google's new Chromebook Pixel 2 a day later. While it's great to finally see the successor to modern-day USB,...

A:USB Type-C is still susceptible to its predecessor's flaws

I don't get this. How can you infect a 220V wall charger which is just a step-down transformer in it's basic form with a virus? How can such a thing retain any data? It has no AI.

http://www.techspot.com/community/topics/usb-type-c-is-still-susceptible-to-its-predecessors-flaws.210087/
Relevancy 25.37%

Google released the original Chromebook Pixel a little over two years ago. At $1,299, the system didn't make a ton of sense for most but what it did was serve as an example of what a high-end Chromebook could look... Read more A:Chromebook Pixel 2015: Great build quality, fast, USB Type-C and cheaper (but still too expensive) Brick-ish. http://www.techspot.com/community/topics/chromebook-pixel-2015-great-build-quality-fast-usb-type-c-and-cheaper-but-still-too-expensive.209610/ Relevancy 25.37% In a strange turn of events, Nvidia elected to use Epic Games' media event (instead of its own last night) at the Game Developers Conference to reveal its newest flagship graphics card, the Titan X. Read more A:Nvidia crashes Epic Games' media event, announces Titan X graphics card Soo... What are the chances of a 6GB "980Ti" variant? A bit like the 780Ti was to the Titan Black? Because it would be better for games and a hell of a lot cheaper If the rumor mill is to be believed, the price is going to be$1,349, Most people who buy this for gaming will have no use of the double precision floating point prowess of the card, and the few that would probably should have spent a couple hundred extra bucks to get a proper Quadro!

http://www.techspot.com/community/topics/nvidia-crashes-epic-games-media-event-announces-titan-x-graphics-card.209423/
Relevancy 13.76%

Hello,

I bought a R9 270X by XFX. My current specs are:

CPU: AMD A10 7800k (Standard Clock Speeds, Graphics Disabled)
RAM: 4GB (2 sticks, both working)
Motherboard: FM2, Gigabyte
PSU: 500 watt 80+ Cert Silver
HDD: 500GB WD Blue

So the issue is that the R9 card consistenly crashes out of all games no matter if I uninstall the drivers or reinstall them. I have tried removing the drivers through catalyst control center and through application based tools (DisplayDriverUninstaller). Once I uninstall and reinstall, it works, until the computer is restarted and then rinse and repeat.

Is this the card saying it is dying? If so it is a weird way of graphics card dying.

http://www.techspot.com/community/topics/r9-270x-doa-or-user-error.209138/
Relevancy 13.76%

Hi, I am having a problem with my external hard drive not working. My laptop cannot read the drive, it does not display properly in my computer and when I try to click on it it freezes and the message appears "Drive is not accessible, parameters are incorrect". I used it about three weeks ago and it was fine so I don't know what happened. I always make sure to safely remove it and am careful not to damage it. The light still still turns on when plugged in and I can hear it trying to work.

I really want to keep the files as they are from my previous laptop which died and do not have them stored anywhere else. My fault I know, but I had thought external hard drives were more reliable and I do not like the idea of cloud storage. Because of this I am hesitant to try CHKDSK. Is there anything else I can do to recover the files or fix the drive? If I take it to a computer technician would they be able to do it?

http://www.techspot.com/community/topics/external-hdd-error-not-accessible-parameters-incorrect.208079/
Relevancy 14.19%

Ok, I have the question of `em all: at every game I try to unzip it gives me the crc error. I tried reinstalleing my windows, tested my RAMs(noo error found)reinstalled the drivers, nothing. I have the next output: amd a8 6600k 4gb ram r7 260X video card and gigabyte f2a55m-s1 motherboard. what should I do? also tried 7zip and latest version of winrar, and I get the memory managemet error

A:CRC error

Seems a bit odd you are unzipping games.. Do they unzip on other computers fine? If so, run a hard drive diagnostics utility like SeaTools. If you can't test on other computers, what are you trying to unzip specifically, games shouldn't be zipped...

http://www.techspot.com/community/topics/crc-error.207554/
Relevancy 14.19%

I've never seen this before. It just popped up a bit ago on my W7 pc.

What does it mean? I hope its nothing bad.

A:RAID error?

I found this in a google search http://h30434.www3.hp.com/t5/Desktop-Hardware/AMD-RAIDXpert-Warning-Errors/td-p/342708

I've known this pc has RAID on it because everytime it reboots/boots up it shows it. I've had this pc for two years this month & just hoping nothing bad is happening.

http://www.techspot.com/community/topics/raid-error.207317/
Relevancy 13.76%

My toshiba will not get on the Internet Google will come up and search but everytime it says Internet error

A:Laptop Internet error

Need specific; try looking in the cmd-> enter eventvwr.msc

http://www.techspot.com/community/topics/laptop-internet-error.207423/
Relevancy 13.33%

We just bought a monitor U2713H direct from Dell.

When we click on Factory Reset, the monitor doesn?t go back to Factory default setting.

-In particular, Contrast/Brightness: 0.
In terms of Color Setting, Input color Format: None.
Preset Modes: Movie

-Then we click on Reset Color Settings, Input Color Format: RGB, Preset Modes: Standard.

-When click on Factory Reset again, Contrast/Brightness and Color Setting come back to the same condition as above (Contrast/Brightness are 0, Input color Format: None.
Preset Modes: Movie).

-After we try to set up Contrast/Brightness to 50/50, we shut down desktop or turn off the power button on the monitor. Then we turn on computer or turn on power button on the monitor, Contrast/Brightness are 0, Input Color Format: None, Preset Modes: Movie.

-In summary, all menu settings can?t be saved by the monitor and Factory Reset doesn?t work.

Any idea would be highly appreciated. Thank you a lot in advance

A:Dell monitor U2713H error: settings can't be saved

What I would suggest is ask Dell if they would warenty it new it should have one and Dell should honor it. I would say they will but I have not done business with them in years, although the monitor I am using right now is one of theirs and is many years old.

http://www.techspot.com/community/topics/dell-monitor-u2713h-error-settings-cant-be-saved.207032/
Relevancy 13.33%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 13.76%

Hi,
I am having a problem with my DVD hardware. Every time I put a disc in and open it in Explorer I get I a popup asking me to burn a disc (image file attached). I've tried going through all kinds of settings but nothing works. I am running Windows 8.1. Any help would be appreciated.

Thanks,

Verity

A:Burn Disc Error

That's autoplay setting for blank disk media.

http://www.techspot.com/community/topics/burn-disc-error.205054/
Relevancy 13.76%

I decided to upgrade my old hard drive to a new hard drive. When I tried to install Windows Xp on the hard drive it wouldn't let me. I have a Dell Xps 400 bought back in 2006.
The new HD is a WE 1tb. The error codes comes when I try to install windows xp on the hd. It says

I got a blue screen error after clicking enter at the screen where there is no partition found:
Check to be sure you have adequate diskspace. If a driver is identified in the stop message, disable the driver or check with manufacturer for driver updates. Try changing video adaptors.

Check with your hardware vendor for any bios updates. Disable bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components. Restart your computer, press f8 to select advanced startup options, and select safe mode.

Technical information:

http://www.techspot.com/community/topics/error-on-trying-to-install-new-sata-hd.204857/
Relevancy 13.76%

Hello all,
Windows 7 doesn't recognize my SSD drive. When I go to disk management, it shows a message to initialize it (image no.1) but when I press OK to do that, one another message appears and says: Data error cyclic redundancy check (image no.2). My computer windows doesn't show that drive and also when I went to cmd->diskpart, again it didn't show that disk to use of chkdsk /f command. How to solve the problem please?

A:Data error cyclic redundancy check ssd

I could to revive that disk in diskpart using PartedMagic in boot. I've uploaded a new image from that. The remained problem here is that I can't delete it there.

http://www.techspot.com/community/topics/data-error-cyclic-redundancy-check-ssd.204783/
Relevancy 26.23%

My year old ACER Aspire keyboard just stop working in a couple of capacities First the numbers on the key wouldn t type at all Checked Num Lock fine then stopped some thing... Laptop working wrong the type and keys tried to type numbers at top of keyboard well some typed the right number but most didn t or typed more than one number Ran Webroot Anti-spyware and Anti-Virus clean Then I shook my computer to see if any crumbs or foreign materials were throwing something off clean Took out battery nada Restored computer to the day before any problems Changed nothing Pressed every Laptop keys stopped working and some type the wrong thing... key to see if something was stuck or key broken None The Delete Backspace Enter and Space Bar do NOT work at all So basically the entire keyboard is not working due Laptop keys stopped working and some type the wrong thing... to something If I type any one key some of them type what I wanted but continue to type the letter or number until I log out of my Google Engine I have always had issues with the keyboard I will be typing along and the cursor will randomly go back to previous sentences and start typing what I am currently typing It is so annoying Why is it hopping all over the place A computer major friend who teaches computer classes said to write to Google and maybe I would find others with similar problems I found several quot sticky keys quot problems but none on point with none of the keys working or working properly He suggested perhaps a Trojan Horse virus but my sweeps come up clean Can anyone help me Thank you Shawnascy nbsp

A:Laptop keys stopped working and some type the wrong thing...

It could be a virus. But It also could just be your keyboard is bad. You may need to take it to your local repair shop if it. Is a laptop and have them check the keyboard out for you. I really do not think it is a virus.

http://www.techspot.com/community/topics/laptop-keys-stopped-working-and-some-type-the-wrong-thing.204613/
Relevancy 13.76%

I am running Windows 8.1. After restarts, the laptop screen would be blank, yet the computer would load. If I hooked up a 2nd monitor, it would show the desktop on that screen but laptop screen blank.

Now when I try to type on that computer (I'm currently on a different computer) the typing of the keys is all off (none of the letters actually type what they are supposed to and some open up random windows and command prompts)

I am wondering if this is a virus. Currently running Malwarebytes. I did a system restore earlier and the problem wasn't solved.

A:Blank Screen error and typing issues

Could be a virus, but could also mean the motherboard is faulty. If still in warranty, RTM.

Does the laptop have a bootable CD reader? If so, then download and make a bootdisk of a small linux (e.g. puppy linux). Booting off that will virtually prove if the motherboard is faulty or not.

http://www.techspot.com/community/topics/blank-screen-error-and-typing-issues.204596/
Relevancy 12.04%

Hi I have an older PC which I gave to my mum It originally ran Vista but I bought and installed Windows Ultimate around weeks ago after it had been inactive for months It was running great but a couple of weeks ago it just started hanging for no real reason Also at startup it would say that the computer had not been shut down properly even if it had This was only when it was switched off at the wall not after checksum defaults loaded" replaced error battery after - "cmos a restart or when the PC was left plugged in and switched on She only "cmos checksum error - defaults loaded" after battery replaced uses the PC to look at You Tube and some webcams from her grandkids and that s it she s not very computer literate Initially I left Windows repair to run overnight but when I looked at it the following morning it was still in the repair screen so I assume it had hung I spoke to a local repair shop and they suggested I test the RAM test the hard drive and replace the CMOS battery The RAM and hard drive checks went without any errors and after I replaced the battery the hanging stopped I played with the computer all evening and shut it down as normal and switched it off at the wall Next day I thought I would start it up just to check it and I was faced with a quot cmos checksum error - defaults loaded quot message I thought that was strange but maybe the battery was dead so I swapped it over with one from my perfectly working desktop to try it out and my desktop worked fine but after shutting down my mum s one it had the same problem when power was pulled So battery was ruled out Incidentally I will say that I reset the BIOS date and time every time I was faced with the error following up with a save and exit It worked fine until I unplugged the computer I then moved on to the BIOS and set it back to default and the same again After this opened the case and used the jumpers to reset the BIOS to default again but no difference My mum will not leave it switched on at the wall constantly in case it self-combusts same with her washing machine TV lamps etc otherwise I would just do that and ignore it Is there anything else someone can suggest that I try System Shop bought by Mesh Motherboard is an ASUS PSN-E SLI gb Ram - samsung gb hard drive - ASUS Thanks for any help nbsp

A:"cmos checksum error - defaults loaded" after battery replaced

I must add that the PC is the same as when I bought it new from the shop, except for adding a Creative Labs sound card (approx 2012) and installing Windows 7 (around 6 weeks ago). All Windows updates are downloaded and installed.

Relevancy 14.19%

I recently receive a pop out error message everytime I start up my laptop. Can anyone please advise? Thank you! The error message is below.

There was a problem starting
C:\Users\XXX\AppData\Roaming\newnext.me\nengine.dll
The specified module could not be found

http://www.techspot.com/community/topics/rundll-error.201803/
Relevancy 14.19%

Hello,

When I play BF4 I get a direct X error after awhile claiming that it cannot allocate any more memory and that I should use a GPU with at least 512 MB RAM.

I have tried to search around but cannot find a solve really.

Some people advise to disable the Intel integrated Graphics in the device manager but no one can confirm if it works or not so I am hesitant to try it...

I have updated drivers for Dx and the GPU without resolve, also tried reinstalling them.

It has not happened for any other games so far but the only game that really demands any memory I play is BF4 ... I will try with Crysis 3 or something similar demanding to see if the error happens there too.

A:DirectX error for AMD R9 290 Tri x 4GB

Obzoleet said:

Hello,

When I play BF4 I get a direct X error after awhile claiming that it cannot allocate any more memory and that I should use a GPU with at least 512 MB RAM.

I have tried to search around but cannot find a solve really.

Some people advise to disable the Intel integrated Graphics in the device manager but no one can confirm if it works or not so I am hesitant to try it...

I have updated drivers for Dx and the GPU without resolve, also tried reinstalling them.

It has not happened for any other games so far but the only game that really demands any memory I play is BF4 ... I will try with Crysis 3 or something similar demanding to see if the error happens there too.

Anyone have any advices?Click to expand...

Well in all technicality the game should not be defaulting to the integrated unless you have your monitor hooked up to the on board connectors so I would not worry about that. If its reading as a memory problem in BF4 then it maybe a problem with BF4 drivers. I have not played in a few days on my 290X setup but an update was just downloaded I noticed a day or two ago.

Have you tried changing over from directX to Mantle and seeing if that helps or vice versa?

Also try the latest Beta 14.2 because it makes things alot more stable than 14.1 was in terms of Mantle at least.

See what happens after trying this, the Intel Integrated should not be interfering so I would not worry about that.

http://www.techspot.com/community/topics/directx-error-for-amd-r9-290-tri-x-4gb.200757/
Relevancy 27.52%

I have this dell laptop, XPS M1330 that I bought new the ship date was 01/08/2008. I have been wanting to upgrade to a SSD but I don't know what kind of connector the system board has on it. It is some of SATA connector but it has separate power connector. I am hoping someone can tell me what type of connector this is and do they make a SSD with this type of connector.

You can view the photo I took of the drive here: https://www.flickr.com/photos/[email protected]/13177305443/

A:Connection type?

Those connectors are SATA and SATA power (the longer one is SATA power). No idea how it works on a laptop though, I think the connectors just are fixed in place where the old HDD was. Before buying an SSD though, make sure it fits in the old space and you should be good, correct me if I'm wrong on any of this though.

http://www.techspot.com/community/topics/connection-type.200878/
Relevancy 13.76%

A:NICs not working Windows 7 Error 31, this one is weird

"so the problem is related to windows and follows the drive"... Re-install Windows on this drive. Error 31 relates to a bad driver that may be reflected in the device manager

http://www.techspot.com/community/topics/nics-not-working-windows-7-error-31-this-one-is-weird.200795/
Relevancy 14.19%

The web server in my IIS has the Default web site stopped. When I hit start, I get an error message
there was an error while performing this operation.
Details:
the process cannot accdess the file because it is being used by another process. (Exception from HRESULT: 0X80070020)
The site bindings are:
:*:57772 (http),*:443 (https), 808:*(net.tcp), *(net.pipe), locathost (net.msmq), localhost (msmqformatname)
Can anyone point out what is wrong?

A:IIS error

That error is saying
1) one program (process) as a file open
2) another attempted to modify or delete it

A most common case is when a process is running and the current directory is \temp\foo\bar

and some process is attempting to delete foo

http://www.techspot.com/community/topics/iis-error.200665/
Relevancy 13.76%

When I am accessing wifi network I get dns failed error message. what is the problem? pls help

A:DNS failed error in WiFi network

Can you connect using a wired connection?
Get a command prompt and enter
ipconfig /all >myTCP.txt​then open that file, copy the contents and paste into your follow-up

http://www.techspot.com/community/topics/dns-failed-error-in-wifi-network.200577/
Relevancy 14.19%

I am also getting a bad image error it pops up on six or 7 start ups ive run mbam disk clean up disk defrag scan disk but its still there. ive looked over many posts and tried to follow others instructions but im still missing something

Jarrow, what are your computers specs?

Relevancy 13.76%

My graphic card showing error on Pc starting
When I start the computer it restarting with this error vt-x1550pci256

this error showing on top left on screen what I do Now ?

ps : sorry for my bad english

Relevancy 39.56%

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.

http://www.techspot.com/community/topics/hard-drive-is-reporting-a-smart-event-error-message.199432/
Relevancy 13.76%

Hi All,

I have made a new rig and wanted to transfer the video/music from old IDE hard drive.

I have tried two IDE to USB convertors and when I try to access my old hard driver from My Computer I receive the error "Format Disk"

I have restarted my PC and now it doesn't even detect it!

A:Format Disk Error with IDE to USB Converter

Sounds like the partition table is messed up on the IDE hdd. The data is still there, but windows just cannot figure out how to "read" that drive. More than likely you'll need a 3rd party application to view the data on the drive and copy it accordingly. I use UFS explorer in the shop to recover data from customers' hdds http://www.ufsexplorer.com/download_std.php There are many other 3rd party data recovery programs/application out there, just google it & I'm sure you'll find one that fits your needs.

Post back, Hope this helps!!

http://www.techspot.com/community/topics/format-disk-error-with-ide-to-usb-converter.198116/
Relevancy 12.04%

Hey,
I woke up on May 10th 2013 & when it started up my laptop I saw this.

I was a bit scared, but I decided to run the following programs:
Mbam (AV)
DSKCHK
Disk cleanup
Disk defragmenter
Scan disk (SCR-scanow)
AVG tuneup
AVG (AV)
MSE (AV)
Restore point.
I do not know what happened, but I have posted on several other forums, but no answer.
Thanks,
Danawesome.

A:Repeated "bad image" error (think it's something to do w/laptop)

Did you fix this?

Relevancy 13.33%

Hi,

I have Windows XP SP3 installed on my desktop and suddenly my LAN/NIC is not receiving and sending packets from my network. The DHCP Client Services and TcpIP services wont start it gives error from the above.

From the device manager of non-plug and play drivers, the tcpip protocol driver, ip network address translator and netbios over tcpip has exclamation point. When I uninstall the drivers and start the services the connection is established but when I shutdown/restart the PC it will came back again the issue.

AFD is running

Below drivers are present in system32\drivers folder.

afd.sys
tcpip.sys
netbt.sys
Any ideas?

A:DHCP Client Service Won't Start - Error 1068

Hello,

I update the system and the LAN driver but still the issue exist.

I copy the netbt.sys from a working machine and paste that to the non-working machine. Same problem.

Is there other way resolving this issue aside from repairing or fresh install of the OS?

http://www.techspot.com/community/topics/dhcp-client-service-wont-start-error-1068.197233/
Relevancy 13.76%

Hello all!
I regularly have the folllowing line appear when my bios starts up -CMOS checksum error defaults loaded. I am having a problem about CMOS Checksum Error, every time I turn on the computer it will wait about 30 secs before the first beep. Then the CMOS checksum error occur. Some days ago I had changed my battery after that this problem occurs. Please help me. I have a snapshots of the same problem.You can check here: http://wealthamplifier.in/images/cmos1

A:CMOS Checksum Error - Defaults Loaded

Could you have installed the battery backwards by mistake? Even though the battery is new, it could be defective.

Relevancy 18.06%

Not sure if I'm in the right section

Just unpluged my m audio delta 2496 card to do some other repairs. After reconnecting and powering up I have no sound in Cubase ( In device setup selecting m audio delta driver I get the following Error message "audio engine error could not activate asio driver m audio delta" Now even windows system sounds don't work. Have tried re-installing 2496 driver....no go. Any suggestions would be welcome.

A:Error message "audio engine error could not activate asio driver m audio delta"

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Click the Upload a File button to upload and attach the file to your next TechSpot post

http://www.techspot.com/community/topics/error-message-audio-engine-error-could-not-activate-asio-driver-m-audio-delta.197151/
Relevancy 14.19%

I have to new hp laptops same type and specs but for some reason one of them gets a dns error and the other doesnt why?

A:DNS Error

Compare the output of IPCONFIG /ALL for the two machines; suspect the failing one is not accessing the DHCP properly . . .

http://www.techspot.com/community/topics/dns-error.196646/
Relevancy 14.19%

I tried to format my laptop today but I cant. "It said that my pc needs to be repaired" and "the application or operating system couldn't be loaded because a required file is missing or contains errors." What should I do then???

A:Error formatting PC

"What should I do then???"... The built-in restore feature is corrupt, so you may have to get a Windows install disc. The hard drive may also be bad

http://www.techspot.com/community/topics/error-formatting-pc.196528/
Relevancy 13.76%

lt lt RESOLVED gt gt For some reason whenever I try to run the file benchmark on my WD Blue TB or WD Black TB on HDTune Pro it always immediately returns a screen saying quot I O Error Test aborted quot Normally I would understand if this was happening if these drives were HDTune on gives drives I/O very test and new aborts Error old or had any indication that they are dying in some way However both drives have been purchased within the last months and the Blue drive was purchased only four HDTune gives I/O Error and aborts test on very new drives months ago They are each filled to approximately - capacity at the moment with this being the highest capacity the Blue has ever reached while the Black drive at one point hit before I reshuffled some files I haven t noticed any other issues with the drives at all except that HDTune s regular benchmark seems to say that the Blue drive is slightly faster than the Black which clearly shouldn t be the case HDTune s own drive status program shows no SMART issues in any of my drives either Does anyone know what could be causing this or how I could fix it Also I m not sure if this is relevant but my motherboard is currently set to run its SATA ports in quot RAID Mode quot instead of AHCI mode I HDTune gives I/O Error and aborts test on very new drives m not sure if that would matter but I don t currently have a RAID array this setting is just from a previous array that I used to have and now I m afraid that if I change the setting my drives might not boot anymore nbsp

A:HDTune gives I/O Error and aborts test on very new drives

Never mind, I figured it out. Problem was being caused by my drives being assigned as the A: drive and B: drive (Windows 8 allows this, and my slight OCD has always tormented me at not being able to use them for hard drives previous to this, so naturally I jumped on the opportunity to assign those letters). Anyway I reassigned to J: and K: drives just for the purpose of testing and all is now well!

http://www.techspot.com/community/topics/hdtune-gives-i-o-error-and-aborts-test-on-very-new-drives.196324/
Relevancy 14.19%

FYI: For those dependent upon MSN.COM, today the website certificate is no longer valid,
as shown in the attached JPG.

Your A/V program may respond differently, but Avast! found the error and offers two solutions:
1) PUNT, ie abandon the access
2) accept the cert and make an exception for this error

http://www.techspot.com/community/topics/msn-com-certificate-error.196061/
Relevancy 13.76%

A:Hard Drive Error After using Disk Drill

I only use WD drives here. WD Passports sometimes they don't work. What I do is this.
Place one in a ziplock bag and stick it into the freezer for 3 hrs or longer.
Thaw-it or use-it while it comes to life while you connect to a USB source like a PC
Most of the time the Passport will continue to work again. It all depends on the condition of it.

Clicking or clunking means the HDD is going bad.
In the pass others would say to use a screw driver handle and hit the drive.
But I always use the freezing method and it works enough to recover the data.
If the HDD is too far gone then nope not going to work.

http://www.techspot.com/community/topics/hard-drive-error-after-using-disk-drill.195888/
Relevancy 13.76%

Hi all my brother has a pc at home that he didnt want anymore so he put it in some black bags and I was taking it to the charity shop so they could sell it but the bag split at top of stairs and pc went tumberling down when I looked at it all the metal brackets had come loose from where u can put cards in and the gpu card came out to I put it all back propaly had couple of errors that I sorted but power abit dodgy when switching on. but the main problem is message comes up in task bar saying usb not recognised after plugging anything in any of the ports checked device manager and nothing wrong in there please help ... only 2 was not working before but now none work.. thanks in advance

http://www.techspot.com/community/topics/usb-not-recognised-message-error.195740/
Relevancy 13.76%

Hi all,
Can som1 help me?
I have a asus p5n-d mobo, that keeps giving the same error at start up " Cmoc checksum error - Defaults loaded". Ive updated the bios file from 0601 to 0801 and also changed the battery but I keep getting the same message.

Ive tried to reset the bios with the mobo cd but that aren't no help either.
If their arent anything else I can do, im thinking of getting a budget socket 1155 mobo with sli, could som1 recommended a mobo.

Thanks

A:Asus mobo Bios error?

Clear CMOS And Update Bios

http://www.techspot.com/community/topics/asus-mobo-bios-error.195357/
Relevancy 22.36%

Hey all new here Hoping for some advice Last night I was playing my games when suddenly my Bigfoot Network Adapter crashed I rebooted thrice attempting to have it come back to no avail I began using my Wireless adapter in its place The next morning I booted up to find that the Bigfoot Network Adapter had come back but with an issue My computer is showing that it is connected to the network and I can read all network computers and access copy write files to other systems on the network The issue is I have no internet on my computer I have tried booting multiple games with them crashing they never crashed as such before even with Internet' 'Access type: Internet no but no internet and tried even booting Skype which crashed when attempting to connect to the internet I m afraid I ve done some tweaking that I shouldn t have considering I was attempting to run my game with lowest ping But I ve only used installable proxy programmed such as SmoothPing and FixMyLag Any help would be appreciated Please PC Specs Intel Core i GHz GB Corsair Vengeance GB Vertex SSD Windows Ultimate SP If there s anything I ve missed do tell New to this fixing 'Access type: Internet' but no Internet stuff Cj nbsp

A:'Access type: Internet' but no Internet

Have you reinstalled your WLAN drivers?

http://www.techspot.com/community/topics/access-type-internet-but-no-internet.194794/
Relevancy 26.66%

Hi all,

So I'm upgrading my motherboard from an ASRock which has caused me nothing but problems since I got it to a MSI. They both are intel socket motherboards. My question is, how do I go about doing this? I would prefer to keep my files from my prior build but I have read that it is necessary that I reinstall my OS before I install my motherboard. I realize I can backup my PC's files and then reinstall them once I've installed the new motherboard but are there things that I should be mindful about while working on this process?

I have a lot of specific questions about this process. So maybe a step by step instruction or something like that would be a good place to start and I can see if I have questions from there.

Thanks

Relevancy 21.07%

Hello. I want to find out why Windows does this cheking to my Memory Card. It happened while booting. After "Checking file system on D:
The type of the file system is FAT32." and other stuffs like: "Unrecoverable error in folder \System Volume Information\catalog.wci.", or "\Sounds\FosterThePeople-PumpedUpKicks(ButchClancyRMX).mp3 first allocation unit is not valid. The entry will be truncated." and "Cross link resolved by copying.
\Images\IMG00502-20121218-1525.jpg is cross-linked on allocation unit 6984." After this proces Windows started normaly. I've cheked my documents on the card and found out that some images were damaged and some old music appeared, but only samples, from about 18 seconds to 56. I foud, also, a "BOOTEX.LOG" file, written in Notepad. Could you explain what happened, please? &sorry if there are some bad spelled words.

A:Checking file system on D: The type of the file system is FAT32

It perhaps got removed incorrectly while some programs still had the file data open/in memory. I'd pull everything off the card, format it, and put the data back.

What is the card in? Does it have to be FAT32? Could you use ExFAT instead?

http://www.techspot.com/community/topics/checking-file-system-on-d-the-type-of-the-file-system-is-fat32.193835/
Relevancy 14.19%

This is my first post and hope I am doing it right, if this is the wrong place to post...I apologize.
quite often when opening a web site I get the error "Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address."
If I refresh the page usually I am able to open it. I am using chrome.

Thank You

A:DNS Look up fail error

Try this:
Go to the start menu and type in CMD-->Right click on CMD, and press "Run as Administrator"-->type this in exactly: ipconfig /flushdns

Tell me if this works out.

http://www.techspot.com/community/topics/dns-look-up-fail-error.193748/
Relevancy 13.76%

Everything on the network was set up fine with sharing between all the computers and it seemed like as time went on the windows computer encountered more and more problems One of the xp computers suddenly required a password to access the windows computer Windows suddenly couldn t access any of the other computers but you could still push files to it from the other ones But now I cant push any files to the windows computer or Between other Networking computers Error Windows and 8 all access any of the windows or xp computers files from the windows comp I get an error message saying Network Error Windows cannot access insertnamehere insertdrivehere You do not have permission to access insertnamehere insertdrivehere Contact your network administrator to request access I get this error message through both windows and and xp Networking Error Between Windows 8 and all other computers gives a cannot access error But I can see the drives I wish to access and the computers themselves I just cannot get into the drives even though all my permissions seem to be set properly If anyone can help it would be appreciated nbsp

A:Networking Error Between Windows 8 and all other computers

First it is a big time security hole to allow shared access directly to a drive

Windows cannot access \\insertnamehere\insertdrivehereClick to expand...

Sharing should be to a directory such as

\\systemName\publicFolder or
\\systemName\personalDocuments
Sharing has two major components:

Hopefully your XP is SP3 which has the LLTP service necessary for Win/{7&8}. If you have XP SP1 or 2, then find the LLTP update for it.

Before we go crazy, you mentioned

any of the other computersClick to expand...

so verify that all the other systems can share with each other (ie ignore Win/8) in both directions A can share with B and conversely. This will ensure the systems are configured correctly AND that the firewall is not a problem.

http://www.techspot.com/community/topics/networking-error-between-windows-8-and-all-other-computers.192500/
Relevancy 13.76%

Hellow guys again ,, hello the best website ever !!!
I jus wanna ask about something ,, Earlier I mentioned something about upgrading my processor to core 2 duo ,, now ive done that but when ever I start my computer ,, this msg shows up !
""" 1801 - microcode update Error
Missing or invalid processor microcode update. please contact hewlett-packard company for a new microcode update to support the new processor stepping """
Any help ?
HP compaq dx7300 microtower is my pc and Intel core 2 duo E4500 @2.20GHz is the new processor.

A:Microcode update Error ?

Have you tried contacting HP concerning it?

http://www.techspot.com/community/topics/microcode-update-error.191974/
Relevancy 13.76%

I have a asus a8n delexe sli which gaves the above error when I do alt f2 on post to enter the flash utility. I was driven to reinstall bios or upgrade it because I am getting freezing; reboot issues; missing drivers; unrecognised hardware issues etc. I have swapped out drives, video cards, reinstalled OS and even swapped PSU to no avail. So has my motherboard just had it?
I folllowed asus instructions and copied the bios to a floppy disk and tried to flash from that. Although I copied all three files in the downloaded zip so I presume it would select the exe file automatically. I will download again. Should it work if I copied to a blank CD? I presume the bios would automatically pull the exe from any device besides the hard drive? I get this error with or without the floppy inserted?

A:BIOS image file check sum error

Did you finally get this solved?

http://www.techspot.com/community/topics/bios-image-file-check-sum-error.190931/
Relevancy 41.28%

I have a Dell Studio 1737 Windows Vista Home 64 Service Pack 2. All of my drivers are up to date and I have the most recent BIOS.

I get this error message in my event viewer a couple of time an hour:

Source: ACPI
Event ID: 13

: The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.

Also, when my computer is unplugged from the AC and running on battery power the system lags a lot and after about 15 minutes its turns off without warning.

I feel like this is all connected. Any advice?

Thank you!

A:ACPI error Event ID 13

This could be caused by a failing hard drive

http://www.techspot.com/community/topics/acpi-error-event-id-13.190645/
Relevancy 13.33%

I have a HP LaserJet Earlier this week I was using my laptop with a phone and an external hard drive both connected to the laptop HP power printer 2430 since error surge will USB LaserJet print not through USB connectors However when I connected the HP LaserJet using a printer cable with HP LaserJet 2430 printer will not print since USB power surge error a USB connector I received a message that said USB Power Surge Error or something similar Since then I have not been able to print I bought a new printer cable and it still does not work I ve been able to use the USB port on the laptop by connecting other items and they work fine so that s not the problem I am able to use the Menu button on the Printer to print out the Printer Info such as configuration page usage page etc However I can not get the Printer to work via a Printer Cable I keep receiving an error that says This document failed to print Is it possible the port which accepts the cable on the printer is damaged My family uses this printer on a daily basis Any assistance with this issue will be greatly appreciated Thanks Rachel nbsp

A:HP LaserJet 2430 printer will not print since USB power surge error

I forgot to add that the printer previously worked using this USB Printer Cable for years prior to this.

I'm still looking for help on this. If anyone has any knowledge regarding this, PLEASE let me know.
Thanks!

http://www.techspot.com/community/topics/hp-laserjet-2430-printer-will-not-print-since-usb-power-surge-error.189947/
Relevancy 13.76%

I keep getting DNS errors when trying to use the internet on an iMac on my network. The DNS errors sort of come and go. RIght now it's fine, but 5 minutes ago it wasn't. It keeps happening. Now that I think of it, this iMac sometimes also has issues connecting to the internet. One second it's working, then suddenly browsing the internet just times out. Again, every other computer on the network would work fine though.

I'm behind a wrouter that's connected to a modem. How can I begin to figure out what's the issue?

A:DNS error on one computer in network

Which OS X are you using? Try flushing the DNS cache: https://support.apple.com/kb/HT5343

http://www.techspot.com/community/topics/dns-error-on-one-computer-in-network.191162/
Relevancy 13.76%

Hey Just signed up to hopefully find Answers Here comes the crazy Ok a few days ago My computer would not load ANY Websites in Any of the Browsers I couldn t even connect to my router which seems VERY strange Luckily I had my laptop right next to me however this was working perfectly fine It had no problems establishing a connection So That led me to believe I may have a faulty Ethernet Cable after testing it via different Computers and Laptop it was obvious it wasn t the Cable So I could only come to the conclussion I might of had a DNS Error somewhere So I changed the DNS adress to OpenDNS However this also did not fix the problem I have tried using a specific IP Unexplainable error network and this doesn t fix it either So In a Final effort to find out what was wrong I disabled my AntiVirus AVG and still it isn t fixing the problem I know that my router itselfs works as I can download perfectly fine on this computer and Apps such as Steam work perfectly Its just connecting to Websites Which my laptop can do I am With SKY I am at my limit I have no Unexplainable network error clue what is doing this Everyone I talked to has no idea Even my University Computer Lecture is baffled All I know is that My computer hates me PS The only solution to fix this is a reboot I have tried various Anti virus and malware detectors They find nothing nbsp

A:Unexplainable network error

What OS are you running?

http://www.techspot.com/community/topics/unexplainable-network-error.190526/
Relevancy 13.76%

My computer has computer error screen like this the picture I attach and it keeps on coming back after I restart my computer. sometimes it will start normally and then I viewed the event viewer there are a lot of errors, criticals, warning and etc. what shall I do? I don't even know how to fix this please help me thanks

A:My computer has an error screen

Lol. What's that? A photo of your monitor?

If yes, monitor could be dying. Or graphics card...

http://www.techspot.com/community/topics/my-computer-has-an-error-screen.190154/
Relevancy 12.04%

Ok here s the history of the problem I have GB Hard drive quot Samsung sp c quot and I am using it since two years with my old desktop system with this S M A R T error at the startup BIOS TWO YEARS BACK I think there are some bad sectors involved at the last part of the HDD space There were partitions initially I e C D E amp F The problem started with partition #83" attribute "1720-SMART failure failing? drive detects imminent hard failed: ... HDD error F with following issues Always took so long copying files into F System got stuck up when some file s folder s from F drive were opened and then automatic restart That time ran CHKDSK on F drive but in the middle of scanning it always restarted the PC automatically Sometimes system restarted when I was copying some HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? random data in the F partition Whenever this restart thing happened at the start up it displayed that there is no primary hard drive detected Then eventually it came back live after - attempts always I also deleted the Partition F and then recreated the partition but same problems persisted YEAR BACK Due to above issues HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? I left the partition F as it was and used others like C D amp E but an year before the partition E started to do things same way F was doing and at that point F was not accessible with error popping The disk is not formatted Do you want to format it now I formatted the partition F and ran following HDD tools afterwards Partition Table Doctor HDD Regenerator Surface tests for C D E was fine but when it started scanning the HDD somewhere in F partition area these tools messed up with something took so long stuck at sectors for long time without repairing it MONTHS BACK I came to know that there are some serious issues in the HDD sectors inside the last GB part of HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing? the hard disk I made partitions C D E F G The G partition was for GB space and I never opened this drive since I created it because this will cause same problem what the F was doing before NOW I don t have much issues with C D E amp F while operating them Don t use F too much to be at safe side But I feel that HDD is very slow overall and and every time I turn this system on I get quot -SMART Hard Drive detects imminent failure Attribute failed quot Wondering if it could be fixed or not and I know and understand that my hard disk was failing ever since and most of you guys will advice to back up and purchase a new one but I am still on to fix this one and as if there s any way to get it right up Many Thanks nbsp

A:HDD error "1720-SMART hard drive detects imminent failure attribute failed: #83" ... failing?

The fundamentals still apply:

for every partition ?X?
chkdsk ?X? /f /r​
The /R will remap bad sectors in an effort to avoid future I/o errors.

a} fix all partitions
b} get the SMART data and save it for reverence (it will not be reset to zero by chkdsk)
c} view the SMART data every day
d} look for increasing statistics

PLAN on getting a new HDD asap

http://www.techspot.com/community/topics/hdd-error-1720-smart-hard-drive-detects-imminent-failure-attribute-failed-83-failing.190152/
Relevancy 13.76%

I recently built a pc with a fx 6100 8gb ddr3 and a 7850 in a nzxt phantom 410. and I'm getting what I think are good temps my gpu reaches 50c in load, and the cpu says relatively cool but on speed fan it says the aes says it's like 90c. So what is this aes and do you think these temps are correct. I believe this could'nt be correct, because I have my fans at 100% and I would like to see what you guys think 2. Ill upload gpu-z cpu-z and speed fan diagnostics later today.

A:Weird temp error? (hopefully)

Do not use Speed fan to monitor temps. Use Core Temp or HWmonitor and then report back.

http://www.techspot.com/community/topics/weird-temp-error-hopefully.189984/
Relevancy 13.76%

New system just built a week ago:

Asus P8Z77-V Pro
i7 3770K
F3-12800CL9D-8GBSR2 DDR3-1600 8GB(4GB*2)KIT CL9 1.25V
GIGABYTE GTX670 2GB OC PCI-E WINDFORCE3X GV-N670OC-2GD
OCZ Vector 2.5" 128GB SSD Indilinx Barefoot3 HD1237 VTR1-25SAT3-128G
Windows 8
The problem is, every 2nd or 3rd time I boot up I get a message by that white flag on the bottom right with a red X on it saying 'restart your PC to repair drive error (Important).

I have attached two screenshots at the bottom showing the messages I get within windows, then a short video of what happens when it reboots.

A:Restart your PC to repair drive error (important)

I'm not familiar with SSDs. It is safe to run a check on it, and what software would you recommend?

http://www.techspot.com/community/topics/restart-your-pc-to-repair-drive-error-important.189187/
Relevancy 13.76%

Every time I start up my laptop, I get this window that pops up and it saids

<Error>
An error has occurred.
ERROR : F3-F100-0004
An error has occurred.
Please press [OK] to turn off the computer.

That is all I get every time I turn it on.
It is a Toshiba Windows 7

-Shamu

A:Error F3-F100-0004

Are you seeing the bios screen before this error appears, if so start tapping the F8 key from the instant that you power on. See if it will run in safe mode.

How old is the PC?

Were you attempting to use the recovery options before this happened? If so read this: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=194865

Do you have a Recovery disc or a Windows 7 disc?

http://www.techspot.com/community/topics/error-f3-f100-0004.162440/
Relevancy 13.76%

Hi I m a new member I recently decided to build my first PC Parts were Asrock Z Extreme MoBo Intel i K - LGA DDR Single stick GB G-Skill GeForce GTX GD OC Seagate Barracuder SATA TB w PSU Now for the problem - BIOS error Extreme update Z77 4 Asrock I installed everything correctly and got to POST so I decided to follow most Internet forum instructions to update my BIOS so I did so over the Internet flash update from the AsRock BIOS setup The problems arose after trying to update it via the Internet Now the motherboard won t even get to POST or show any signs or working Asrock Extreme 4 Z77 - BIOS update error on a monitor the fans for ten graphics card CPU and chassis all work the PSU is working fine But the Dr Debug is showing the status code which states in the description is that it is quot not used quot I don t know what to do iv taken out the graphics card and tried still the same disconnected everything except the socket and all pins are fine on the PCIe slots and RAM Any help would be appreciated ps I have a spare Gigabyte gt GB hanging round and was wondering if I can get the MoBo to work will it be worth sticking the in with the for any improvements however slight until I can afford another for SLI nbsp

A:Asrock Extreme 4 Z77 - BIOS update error

"Now the motherboard won't even get to POST or show any signs or working on a monitor" You might be able to get the motherboard to respond by removing the battery for a few minutes. If not, the motherboard may need to be replaced

http://www.techspot.com/community/topics/asrock-extreme-4-z77-bios-update-error.188524/
Relevancy 14.19%

Hi everyone I ve been having a strange A55 error Z77 Asrock issue since I cleaned my PC this morning When I booted up my PC after cleaning I got an Error which signifies that no memory is installed detected I m using two identical GB sticks of GSkill Ripjaws Asrock Z77 error A55 MHz and both were correctly installed in slots A and B So I switched out the sticks and put them in slots Asrock Z77 error A55 A and B and the system booted up just fine I shut the system down and switched the DIMMs back to their original slots A B and now the computer again booted successfully I played Hitman Absolution for about an hour then turned off my machine and went out Just reached home and started up the system All was fine till I again started the game and it crashed with a BSOD On reboot I again got Error Did the same DIMM switching procedure and all seems well again Any pointers as to what might be wrong I ve used the system without issues for months and suddenly this nbsp

A:Asrock Z77 error A55

Maybe something went wrong with the RAM. When you say you cleaned it, were you talking about dust or cleaning out temp files and the like? If dust, maybe there was some stray static that zapped something. Anyway, see what happens if you leave the RAM in the A2 and B2 slots and play games. Up to now you've only just booted up and then switched them back.

http://www.techspot.com/community/topics/asrock-z77-error-a55.187530/
Relevancy 27.09%

Hello Everyone errors event DNS client I m have a problem on my newer computer that I would like DNS client event errors to know if anyone could give me hand trying to figure out DNS client event errors Now this is not an error that is preventing the computer from working But I get an error in the Event viewer constantly Just makes me think that there is something wrong Error is as follows Log Name System Source Microsoft-Windows-DNS-Client Date AM Event ID Task Category None Level Error Keywords User NETWORK SERVICE Computer Jay-PC Description There was an error while attempting to read the local hosts file Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-DNS-Client quot Guid quot C E- EEA- A -A FE-A B DDB D quot gt lt EventID gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Jay-PC lt Computer gt lt Security UserID quot S- - - quot gt lt System gt lt EventData gt lt Data Name quot ErrorCode quot gt lt Data gt lt Data Name quot Location quot gt lt Data gt lt Data Name quot Context quot gt lt Data gt lt EventData gt lt Event gt Like I said earlier If anyone can give me a hand with this I would greatly appreciate it Also Im sorry if I m posting this in the wrong Forum Topic Wasn t sure what sub topic I was supposed to put it under Thanks nbsp

A:DNS client event errors

Easiest approach is to delete the host file
\windows\system32\drivers\etc contains hosts

First stop the client by getting a cmd prompt and enter net stop "dns client" (exactly as shown)
now cd to \windows\system32\drivers\etc

del hosts
then recreate it using echo "" >hosts
(that is two consecutive double-quotes without anything between)

now you should clear the event viewer log containing the error and follow up with
net start "dns client"

http://www.techspot.com/community/topics/dns-client-event-errors.186735/
Relevancy 13.76%

Hi I have a toshiba laptop satellite a15-s157 and a black page comes and says 1DE number 1 error

A:Toshiba Satellite a15-s157 error

Sorry there mate, your choices in the Poll make no sense to me . . .

http://www.techspot.com/community/topics/toshiba-satellite-a15-s157-error.185453/
Relevancy 13.76%

Hi guys,
I am running ASUS M2N68-AM PLUS motherboard. SOCKET 940 ON xp
Ive installed a Gigabyte HD 7770 Graphics card. I installed it according to instructions. The card is getting power but after installing it with the CD that came with it, it keeps saying cant detect drivers for this device.This is obvious because of the display Im getting.
Wouldnt be a compatability problem could it.?

Any ideas guys
Rob777

A:Functioning error after installing video card

Hey Rob, pardon me but I'm a little confused of what you've said. It says here that you have the ASUS M2N68-AM Plus Motherboard and yet, it still on the classified Socket 940? Not to mention that mobo is running both Socket AM2/AM2+ already. That's a long road for that architecture.

Therefore, you shouldn't be having problems with that Radeon HD 7770 of yours, because it's totally compatible with that motherboard; Unless you have checked inside the system unit if it has been connected properly.

http://www.techspot.com/community/topics/functioning-error-after-installing-video-card.179902/
Relevancy 13.76%

A:Video hardware error

Are you saying you left the software for the other Video card install.. This would mean the drivers to. If this is the case. and I am understanding you right. If so this may very well be your problem. I would uninstall the software for the old video cards software and drivers.

http://www.techspot.com/community/topics/video-hardware-error.184185/
Relevancy 13.76%

I have no sound on my PC . I used to have before but I don't have now . Any ideas :S HELP

I ran msinfo32 and found this error :
Realtek Ac '97 Audio Pci/Ven_878 etc... This Device cannot Start

A:Realtek cannot start error 10

What are your PC's specs? A desktop or laptop?

http://www.techspot.com/community/topics/realtek-cannot-start-error-10.184217/
Relevancy 13.76%

Hi to all. I am not sure if this is the correct board to post my problem to! I apologize if I am wrong.

I save my picture albums in external storage device. Its the memory of an entire lifetime, my school, highschool and all. Now I opened it after many days to find that many of the JPEG files are showing 'X' although their properties are showing appropriate file size. If I try making a slideshow, it says 'No preview available'. I have tried opening it with MS Office Picture Manager and Adobe Photoshop 7 but of no avail. I have tried to look it up on google and tried repairing the images using a few free online picture repair tools, but it says no data available or something. Please help me resurrect those images. I dont understand what could possibly go wrong with them! I use Windows XP home. They are very valuable to me.

Thanks in anticipation.

A:JPEG file error

can you open ANYTHING on that external device?

http://www.techspot.com/community/topics/jpeg-file-error.183222/
Relevancy 12.04%

Pls anyone who can advise me on how to fix this minor issue.. So I had a windows welcome tune whenever I on my PC.. but after a few minutes, there are no sounds when I watch online or some movies on my pc.. and when I click the audio icon on taskbar, it states that there are no active audio mixers.. So I just go to services.msc and windows audio then start it, then everything's fine.. not until I restart my PC.. it is set to Automatic but it just stops on its own after every restart.. I thought of having a system restore but afraid of what might happen.

http://www.techspot.com/community/topics/there-are-no-active-audio-mixers-error-despite-having-a-functional-hardware.182911/
Relevancy 13.76%

My fan recently broke. So I simply jus popped another one on. The fan I replaced it with jus has red and black which is obv live and neg but the one I took out has red black and yellow any idea about the yellow ? The fan works great but CPU fan failed error keeps appearing then when I press F11 it says entering setup but still shuts down.any ideas about how to keep it running just to get into the settings and change the CPU fan settings. Would be grateful with any help. Thankyou.

A:Help needed to bypass the CPU fan failed error at startup

You bought the wrong type of fan. They aren't all the same. You should have bought a CPU fan but you have a case fan instead. The yellow wire goes to a sensor connection that controls the speed of the fan. The motherboard detects the missing connection and throws the error you saw. The solution is to buy the correct type of fan.

http://www.techspot.com/community/topics/help-needed-to-bypass-the-cpu-fan-failed-error-at-startup.170008/
Relevancy 13.76%

Hello,

I've just changed my internet from wireless to wired using a D-Link 2780 modem connected to a gigabyte SP2612R Network Adapter.since then I have had nothing but problems.

Youtube will not play videos - it's just the rotating timer circle all the time. IE 8 opens to a Diagnose Connection Problem even though connection is good - if I then search anywhere there's no problem.

Various Websites give me a 'Diagnose Connection Error' usually https sites.

I've run a Malawarebytes scan which found one issue which was fixed. But still the same annoying issues.

I using Windows XP and I connect with TALKTALK.

Any help is greatly appreciated.

Thank You

David

A:Diagnose connection error

Sorry - I copied a Hijack this log and Malawarebytes in this post but it doesn't seem to have copied correctly. I've now uploaded these logs.

David

http://www.techspot.com/community/topics/diagnose-connection-error.180820/
Relevancy 14.19%

Recently, I had a problem with my laptop's harddrive(?). Whenever I ran a file, it would usually stall/lag, or freeze. May it be a song, picture, application or whatever, it takes hours to load or sometimes it just goes not responding.I can't even copy files from second to primary partition or vice versa (takes 15min to copy 30mb of files? & ends up with)
0x8007045d​Cleaned registry(CCleaner), antivirus(Avira) scanned, MBAM scanned, Chkdsk /r'd, and even though it is a little better than before, it's still messed up. Can hardly get anything to run, what do you think could be the issue?
OS : Windows 7 Ultimate 32bit
It didn't ever happen before so I don't really think it's about system specs, and I don't really remember installing anything since yesterday (that's when it all started)

A:0x8007045d I/O error

The laptop has a self diagnostic test in BIOS, so I just ran that and yeah it's failing with some error codes.
I even formatted and all before checking with that but nope no luck, it's still lagging.

Would had drive solely cause this problem or could there be something wrong with the memory as well?

Update:
Windows won't let me format my second partition

http://www.techspot.com/community/topics/0x8007045d-i-o-error.180103/
Relevancy 14.19%

hi all,

A:VPU error

First off, welcome to TechSpot, second, I don't have that much experience dealing with VPU error's. For those types of error's are normally caused by ATI video card software. I've been a strict Nvidia only guy, so VPU error's, never had any!

But your question might gain greater traction if asked inside our "audio & video" section, I'm providing that areas link.

Good luck...

http://www.techspot.com/community/topics/vpu-error.179721/
Relevancy 13.76%

Hi,

My L500 fan is no longer working correctly

I am getting this message

Warning:a problem with the cooling system has been detected. please turn off the computer immediately, and return it for service.

The fan runs inconsistently (always for a few seconds on start-up, very sporadically the rest of the time, but it is completely stationary for the most part.

The computer is currently in pieces, and I am ready to replace the fan with a new one, however im not sure that will fix the problem (as the fan still seems to sometimes run).

Thread Name - 'My Toshiba Satellite l500 cooling fan has stopped working'
This closed thread had a post at the bottom by kristain, has anyone else encountered and resolved something along these lines

A:Toshiba Satellite l500 cooling error

Are you going to replace the fan or the entire cooling heatsink and fan? Was the heatsink clogged with dust? Keep in mind, this also may be a motherboard issue

http://www.techspot.com/community/topics/toshiba-satellite-l500-cooling-error.179149/
Relevancy 13.76%

Hello everyone

I'm having a problem with my DVD burner... actually I've had it for almost two years now, but I only decided that enough is enough with this thing and I want to find a solution for it.

The long and short of it is this. Whenever I try to burn something on my DVD, it fails at the end and gives me an 'input/output' error and ejects the DVD. I have no idea why this happens. I should note that my DVD drive is fine otherwise, it can play DVDs and CDs without any problem. If anyone needs any additional information, I even saved the log-file that the my DVD burning software saved after it was finished.

Can anyone lend a hand? Thanks in advance.

A:Input/output error when burning DVDs

What software are you using? Try CDBurnerXP, it's free.
Also, try a different manufacturers DVD's.
And you could look for a firmware update for the drive.

http://www.techspot.com/community/topics/input-output-error-when-burning-dvds.177467/
Relevancy 13.76%

Hi somebody can help me ? when i try to install soundmax appears
The audio driver files do not support your computer hardware
Note: if you uninstalled audio software without restarting your PC restart now then run this setup again.
But this driver i had it before reboot my pc and now it doesnt work.
My audio is integrated in motherboard and the motherboard is asus p5lo2.
Thanks!!

A:SoundMax installation error

http://drivers.softpedia.com/get/SO...us-Realtek-ALC882-Audio-Driver-51005125.shtml

http://www.techspot.com/community/topics/soundmax-installation-error.178195/
Relevancy 13.76%

hi guys I'm wondering if anyone would happen to know what the led codes for this card are I get one flash on the top led then 2 quick flashes on the bottom then the bottom stays lit, I get no signal from the card. I have emailed asus with no reply

A:HD 3850x2 error codes

The codes must be in the installation manual.

http://www.techspot.com/community/topics/hd-3850x2-error-codes.177981/
Relevancy 13.76%

Hello, it is the first message I have gotten along with messages that say that failure is imminent. I am backing up the computer, but I need advice on how to fix it and it it is possible that the error will just "go away"

A:First error message HM641JI on Sony VAIO

I thought I might give more info...it's a Sony vaio f series and the error is with the Samsung hm641ij and I haven't switched in the computer since lat night.i am using my phone. Thank you again for any help

http://www.techspot.com/community/topics/first-error-message-hm641ji-on-sony-vaio.176299/
Relevancy 13.33%

Hi everyone In need of help Started up my Dell laptop and I am 1737 2000-0321 display on laptop, Error Dell Blank greeted by a blank screen though the machine goes through the motions of starting up I do not see any faint ghosting When connected to an external monitor all works fine and I have tried changing the inverter but Blank display on Dell 1737 laptop, Error 2000-0321 no luck Ran a diagnostic check and receive the following Error Code Msg Error Code - Msg LCD EDID - Unable to access EDID EEPROM I also tried holding the quot D quot key and powering up The LCD flashed a series of solid color screens Red Green Blue White Black I assume that this means that the backlight is good Does it also mean that the cable is good Not sure what else to check I am guessing that it is eiter the LCD screen controller board itself or the cable Any advice I am comfortable replacing parts Prior to this everything was working fine The display had even brightness and color Would anyone be able to restore my sanity and offer some words of wisdom guidance Would be much appreciated Many Thanks nbsp

A:Blank display on Dell 1737 laptop, Error 2000-0321

Replace the LCD panel including the backlight. External monitor okay, motherboard is okay... Slight chance of a damaged LCD cable to motherboard

http://www.techspot.com/community/topics/blank-display-on-dell-1737-laptop-error-2000-0321.176322/
Relevancy 13.33%

when I start my Dell laptop Inspiron 1720, I get an error "Disk read error, press ctrl+alt+del to restart".
I tried formatting the harddisk using Windows 7 installation disk but am unable to do it.
Kindly reply as soon as possible.

A:Disk read error press ctrl+alt+del to restart

Sounds like you have a dead Hard Drive, you'll need to replace it.

Relevancy 14.19%

I have a Xigmatek HDT-SD that s seated on my X T for like a month now-been cooling my X before I started to get CPU Fan Error message when the system starts this week It doesn t happen all the time though-just a couple random times The fan s running alright though everything seems to be error! CPU fan alright but the error s scaring me I CPU fan error! m afraid that the CPU might fry up on me while i m hitting up Skyrim hard What might be causing the error I ve been wanting to replace the cooler though but I don t really know if I m going to benefit from an upgrade right now The temps are C idle and on a small FFTs prime stress I wanted to get the Cooler Master Hyper Evo It looks pretty much the same as the cooler I have right now but reviews say it s pretty good I don t want to overclock or anything but it just so happens that I do a lot of cpu intensive work like running virtual machines and playing games What do you think go for it Btw HWmonitor screens are in the attachments nbsp

A:CPU fan error!

Is the Xigmatek fan plugged into the "CPU Fan" on the Mobo. and not on a case fan connector? I have the same cooler on a 2500k @ 4.3GHz and I am very happy with it. If properly installed and with thermal paste properly applied (might want to check that) you should have no problems. Those temps are fine. Im playing Skyrim on the igpu for now.

http://www.techspot.com/community/topics/cpu-fan-error.175227/
Relevancy 13.33%

O/S error

When I have seen the error report "O/S not found", or similar it has meant the hard drive has failed in some way, probably the circuit that controls the seek arm.
If that has happened then the "system restore" will not work either, because, as you noted, it is a copy of the working O/S but in a separate partition, that is normally not used. Problem is the hidden partition is just a part of the same hard drive that won't work.
If that is the situation, the only real answer is to replace the hard drive, and reinstall the O/S plus the software you need. It is much simpler and cheaper to back up the hard drive while it is working, so that come the day it fails, at least the data is safe, and can be restored to a new hard drive.

Relevancy 13.76%

Hi, im using an Acer ASPIRE timeline X the 4820TG-6847 one and recently it just blacked out and wouldn't turn on overnight now when i booted it up earlier this afternoon it worked but for some reason it doesn't bring up the switchable graphics options that is normally accessed through right clicking the desktop also normally it automatically switches to the high gpu settings when im plugged in but now it wont any ideas on how to fix this?

A:Laptop switchable graphics error

What version of Windows? Is Windows fully updated?

http://www.techspot.com/community/topics/laptop-switchable-graphics-error.174379/
Relevancy 14.19%

I'm printing from a xerox phaser 8650. It was working fine until just recently, and now it gives a message:

error: timeout
offending command: timeout

Stack:
<<
-mark-
-mark-
21690
3

Anyone know what this means?

A:Printer error

delete jobs in the print queue

uninstall the printer; reboot & then reinstall the printer

http://www.techspot.com/community/topics/printer-error.174646/
Relevancy 13.33%

I have Windows seven alien ware on my pc and my g3 hauwei modem continues to give me the message error 31: a device attached to the system is not functioning. when i try to connect

A:Huawei 3G modem error 31: A device attached to the system is not responding

Error 31 means that Windows can't load the 3g modem driver. Are you running Windows 7 64-bit? What is the model number of the hauwei modem? Please be aware that there might not be a hauwei modem driver available for Windows 7...

http://www.techspot.com/community/topics/huawei-3g-modem-error-31-a-device-attached-to-the-system-is-not-responding.163138/
Relevancy 13.76%

Hi,

Can anyone please help with this problem as it's driving me nuts. I am getting the DNS error when I try to go to certain websites ie. ebay.com. I've been in contact with my ISP but they don't seem to know how to fix the problem. My system consists of: WinXP Pro sp3, D-Link 2640R Router, wired connection. I'd be grateful any help. Thank you....

Verity25

I have managed to resolve this issue myself....

A:DNS error on random websites

Hmm, w/o more info, an inability to access common sites like "eBay" suggests your "Network Adapter" (not hardware, but a MS Networking driver) is corrupted. A number of things can cause this, but "AdWare" is the most common culprit. The problem has always been far too common with XP (and earlier). Much less of a problem since Vista/W7 made changes to those essential services far more unlikely.

If you can, I suggest you try connecting another PC to the same internet connection and see what you get. Or, if you're computer savvy enough, I recommend downloading a free copy of Ubuntu Linux and connecting to the Internet with the "Live CD" (a way to test the OS w/o installing it.) Both methods will rule out an issue with your ISP.

http://www.techspot.com/community/topics/dns-error-on-random-websites.173963/
Relevancy 13.76%

Hi - I have a yellow warning indicator in my Devices and Printers folder next to my PC. The error message is:

Name - Texas Instruments 1394 OHCI Compliant Host Controller
Device Type - IEEE 1394 Bu host controllers
Device Status - This device cannot start (Code 10)

I am not exactly sure what this is affecting but I am unable to print for one, despite uninstalling and reinstalling the print drivers.

Anyone seen this type of issue before?

A:TI compliance host controller error message

What is the make and model of your printer. What type connection does it have? USB, Firewire or wireless?

http://www.techspot.com/community/topics/ti-compliance-host-controller-error-message.172675/
Relevancy 27.52%

I have an ATI Radeon 9250 which is pci.
I'm looking to upgrade to a decent gpu.
I want to know if having a pci card necessarily means I only have a pci slot.
I have an Intel Celeron 2.4 GHz

I used PC wizard but didn't really come to any conclusion.
Under mainboard it says "Slot PCI : 32-bit [5.0v, 3.3v] - Empty"
Not really sure what this means.
I also see "Number of PCI Bus : 2"
Does this mean I could use two cards?
And also I see "Number of AGP connectors : 1"
Does this mean I have an AGP slot?

If I can upgrade, what might you recommend? I don't really play games, purely for game development.
If I'm stuck with pci cards, could I get anything that could significantly increase performance?

A:What type of card can I use?

You should take a look at your hardware instead of trying to find evidence buried within software detection methods. Learn what you have by seeing and identifying for yourself. Once we know for sure what you have available for card slots, we can then advise you with further details.

Physical Differences: PCI Express [ PCI-E ] vs AGP vs PCI

Difference Between AGP and PCI

Taking the Mystery Out of PCI-Express

http://www.techspot.com/community/topics/what-type-of-card-can-i-use.173321/
Relevancy 13.33%

my laptop is a dell latitude/D520 PP17L
IT SHOWS UP ERROR CODE 1000-0148 UNIT 2 OPTICAL DRIVE BISTOPU TEST FAILD.thats all it says and i'm running windows 7 please can anyone help on what to do .also it plays dvds but no other discs i looked on dell site for code and it says take drive out then put back in and it shuld work but would like help from here before i touch it as this site and the people here have always been 100% spot on .. thanks

A:Error code 1000-0148 CD-ROM drive (Dell Latitude D520)

wow no one can help ??

http://www.techspot.com/community/topics/error-code-1000-0148-cd-rom-drive-dell-latitude-d520.173060/
Relevancy 13.33%

I recently had a virus on my desktop pc , and to my knowledge that is all removed....ran several different programs and all came back clear..also malware bytes came back clear...now I am having trouble connecting to the internet on that computer.( currently using laptop to post this)..when I open IE, I get a message saying diagnose connection problem but this doesnt fix the issue..i have included the log for that if this is any help....I am lost on this ,any help would be greatly appreciated.

A:Error attempting to validate the winsock base providers:2

get a command prompt (start->run-cmd) and enter netsh int ip reset resetlog.txt

the corrections will be in the resetlog.txt file.

be sure reboot the system to get the benefits

http://www.techspot.com/community/topics/error-attempting-to-validate-the-winsock-base-providers-2.172735/
Relevancy 13.76%

Hello so this is the issue I have win vista x sp Toshiba satellite and a Seagate freeagent goflex tb external HD I had been using the external drive I/O hard external with error device for a while noticed some information wasnt really working properly I thought I would do a chkdsk However I used Tuneup utilities to perform the thorough chkdsk of my external HD i figured it would find and fix any bad clusters WRONG after hrs of waiting I restarted the PC I/O device error with external hard drive and now i cant access any information The external shows up in quot computer quot I can open certain folders but after a few mins I cant access anything and i get the I O device error ive tried running chkdsk r just from the PC in a CMD window It shows a list of - files I/O device error with external hard drive that are quot unreadable quot and sticks on a certain file at around complete every time Ive tried all of seagates suggestions and other then that everyone else just says to run chkdsk on other forums I really do not want to loose this information at all costs any information would be fantastic thanks for your help in advance nbsp

A:I/O device error with external hard drive

The Freeagent's power supply has probably failed

http://www.techspot.com/community/topics/i-o-device-error-with-external-hard-drive.171517/
Relevancy 13.33%

Hi
I just moved my system (Asus M2N sli deluxe) to a new Antec computer case, and installed a large Noctua heat sink. Still using the same video card (Asus en7200gs). when I tried to boot up I got the error code. Makes sense b/c I don't get any video. I tried re-seating the video card and tried a different slot. No luck.

I just ordered a new video card to try out (I could use the HDMI upgrade anyways), but I have doubts that will fix it based on other inconclusive threads I have read.

What else could the problem be? Could it be the new CPU heatsink? Maybe the motherboard is bowed? Anything else I can try?

A:Award BIOS - 1 long, 2 short beeps - video error

Just try the new video card when it comes in. The beeping may mean that the motherboard is okay

http://www.techspot.com/community/topics/award-bios-1-long-2-short-beeps-video-error.172328/
Relevancy 14.19%

Well guys i have to this error to my pc....asus m4a78t-e and he show me when i powered my pc FAN ERROR PRESS F1.....well i'm going to this option....and instead of N/A i change with IGNORED and after i never see this error and he's entered in the windows smoothly.hi all!

A:Fan error... press F1

Check to make sure the CPU fan hasn't failed or stopped working.

http://www.techspot.com/community/topics/fan-error-press-f1.171855/
Relevancy 13.76%

Having issues with Direct3D

I just installed Windows 7 on my computer. I haven't used in a while and got a copy from my dad. Since I don't have any work to do on it yet, I decided to install a game I recently got into - League of Legends - but the problem is, I cannot play. When I start up the game, I get the error in the title... "Could not load direct3d" I have no idea what's going on and I would love some help on the issue.

Here is my DxDiag if needed:
View attachment DxDiag.txt