Windows Support Forum

Windows 7 Ultimate updates and SSD question

Q: Windows 7 Ultimate updates and SSD question

I have a 128gb samsung SSD. I was wondering what updates I can remove to get more space on the SSD because windows7+all updates are currently using half of the SSD space and somehow only 119gb of the SSD space is displayed so I'm guessing that 8gb is reserved or something.
I'm currently removing the extra languages and those are giving me and extra 5,5gb space

Relevancy 100%
Preferred Solution: Windows 7 Ultimate updates and SSD question

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows 7 Ultimate updates and SSD question

Somehow I think you have more installed than Windows and updates. Internet Explorer, Bing Bar, and Bing Desktop are the only updates I have hidden. All other Windows Updates have been installed. I wouldn't put all the blame on WIndows, if you have an install using 60GB.



​Anyone with more than 8GB memory and still has Pagefile and Hibernation, by default has more than 16GB used by these two files alone. I recommend using them only if needed. I personally don't need them and have removed them both.

Check and see if you have a Hibernation file. If you don't use hibernation features, the file can be removed.




Windows 7 ? Delete Hibernation File (hiberfil.sys)
To turn off or disable hibernation, type the following command at the prompt:
powercfg ?h off
This will disable hibernation and will remove the hiberfil.sys file from your system.Click to expand...

Monitor your memory usage and if you have more memory than you ever use. The Pagefile can be minimized. I currently have mine turned off, with 8GB installed. But caution though if you turn the Pagefile off, Windows will not be able to compensate for a shortage of memory and the Windows session will crash. While I am comfortable not using a Pagefile, I do not recommend others do the same until they are comfortable doing so. I recommend lowering the Pagefile size to 1GB, and if Windows needs more, the size will be automatically adjusted.

http://www.techspot.com/community/topics/windows-7-ultimate-updates-and-ssd-question.200043/
Relevancy 9.89%

I have recently somehow disabled my windows key. I have tried going to Microsoft and doing the "Fix it" thing for the registry and it does not work. I have tried this numerous times. Could it possibly be the keyboard I'm using? It use to work however with the same keyboard. I use Avast Anti-Virus, Malwarebytes and iObit system care as my general cleaners. Not sure if any of those have a default setting to disable the button. Thoughts / Suggestions please?!?!
 

A:How did my Windows key become disabled?

Do you mean Windows is asking you to activate again? What version of Windows are you running?
 

http://www.techspot.com/community/topics/how-did-my-windows-key-become-disabled.192522/
Relevancy 9.46%

Power outage due to storm. Came back on without pictures and documents. It's an HP desktop. Would a file recovery program work? I've tried some of the instructions online, but they don't work.
 

A:Lost pictures on Windows 7 from power outage

Oh mary; I feel your pain. Were the pics within one folder and now they're ALL missing?
 

http://www.techspot.com/community/topics/lost-pictures-on-windows-7-from-power-outage.217351/
Relevancy 9.46%

I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).

Thank you
 

A:Do you need more than Windows default tools to check/repair a hard drive?

IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
 

http://www.techspot.com/community/topics/do-you-need-more-than-windows-default-tools-to-check-repair-a-hard-drive.217548/
Relevancy 18.49%

I've done no overclocking, no advanced work whatsoever. Every time I try to google my issue, all of the solutions seem to be based around the person with the issue overclocking their system thus causing high tempuratures. This is not that issue.

On to the actual problem, my motherboard reports temperatures of 69c when running any program that takes any worthwhile amount of system resources (and some that don't), in particular, most games. CPU and GPU tempuratures seem far lower, around 30-40c. Assuming the sensor isn't to blame (and it isn't, if the feel of the case is any indication), are there any reliable ways to lower MB tempurature with simple BIOS and power settings?

Running an old F1a55-M (FM1) on Win 7 Home Premium, SP1.

EDIT: The motherboard idles at 47, which also seems high. I've changed locations for better airflow several times and wonder if I just flat-out need a larger case.
 

A:Question re: system temperatures

Fans running, dust?
 

http://www.techspot.com/community/topics/question-re-system-temperatures.217445/
Relevancy 9.89%

I have a Soundblaster Z on my PC that was working fine until I upgraded to Windows 10 today. Now the sound still works but sounds like there is hardly any treble at all. It sounds like singers in songs are singing in a tunnel or something. You can't hardly make out what the vocalist is saying over top of the background music.

Can someone please help me fix this!?!?!?!?!
 

A:Windows 10 messed up my Soundblaster Z

Not yet maybe. According to Creative's website, drivers for Soundblaster Z will be available in August 2015. It doesn't say exactly when though.
 

http://www.techspot.com/community/topics/windows-10-messed-up-my-soundblaster-z.217435/
Relevancy 9.46%

Following yesterday's worldwide launch of Windows 10, all three major GPU vendors have released new graphics drivers that support Microsoft's new operating system. If you're upgrading to Windows 10, make sure you download and install these drivers soon after launch. ...

Read more
 

A:AMD, Nvidia and Intel release new GPU drivers for Windows 10

Is AMD planning to release Windows 10 drivers for RadeonHD234k cards too? Are those machines stuck with Windows 7?
 

http://www.techspot.com/community/topics/amd-nvidia-and-intel-release-new-gpu-drivers-for-windows-10.217386/
Relevancy 18.49%

Hey,
I recently decided I'm going to start using my old laptop again. I swapped the hard drive for an SSD and I'm quite pleased with the performance boost that got me. I am now looking for a ram upgrade from 2gb to 8gb.
I have a Dell inspiron n4010.
I went to crucial's website and did the system scan. The scan said that this would fit my needs.

Unfortunately, crucial doesn't ship to me. I'm forced to look elsewhere. I looked for something similar on another store's website. My question to all the experts out there is: will 2 of these work with my laptop and get me the 8gb of ram I need?
thanks for the help!
 

A:Quick ram upgrade question

Yes. The specs are exactly the same. Over the years I have used both Kingston and Crucial many times for memory upgrades and both are excellent.

You can also do a memory scan at Dell's own website. Just don't buy what they offer because they'll tell you to only buy genuine Dell memory blah, blah, blah. The Kingston will do you quite fine.
 

http://www.techspot.com/community/topics/quick-ram-upgrade-question.216718/
Relevancy 9.46%

I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help

Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
 

A:Windows 7 can't connect to internet through Wifi or ethernet cable

Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
 

http://www.techspot.com/community/topics/windows-7-cant-connect-to-internet-through-wifi-or-ethernet-cable.200026/
Relevancy 9.46%

The second quarter of 2015 saw the sharpest decline in global PC shipments in close to two years and once again serves as a reminder that last year's brief resurgence was little more than a fluke.

Read more
 

A:PC shipments continue freefall ahead of Windows 10's arrival

Nobody needs to upgrade every three years now. You can easily hold your hardware for up to 10 years if you really want to.
 

http://www.techspot.com/community/topics/pc-shipments-continue-freefall-ahead-of-windows-10s-arrival.216415/
Relevancy 9.89%

I can not find any DirectX compatible graphics when I try to play the Sims 2 for the Windows XP. Please Help Me! But I do not have any internet though.
 

A:Sims 2 on Windows XP

Try this page for help and then let us know what the outcome is.

http://www.systemrequirementslab.com/cyri?gameName=the-sims-2&itemId=10222&p=r
 

http://www.techspot.com/community/topics/sims-2-on-windows-xp.216418/
Relevancy 9.89%

I have previously on a different PC recorded the stereo mix in Audacity, whilst playing a CD and would get the full frequency range of the CD. On my current PC I now get a 20khz cut off, despite changing the settings (the sample rate and bit despth) on the playback and recording devices in Windows and also in Audacity. Does anyone know why this would be, and if there is any way of correcting it?
 

http://www.techspot.com/community/topics/realtek-windows-20khz-cut-off.216409/
Relevancy 9.46%

Okay so for the past several hours I ve gone through the throes of attempting to get my Asus laptop s built-in webcam to work I took a on laptop cannot Windows 7 webcam the built-in Asus detect my look at Device Manager and had found two items titled quot Base System Device quot or something to that effect I don t quite remember and I thought that one of them would be the webcam Well after searching for the mystery items Hardware ID on Google I had Windows 7 cannot detect the built-in webcam on my Asus laptop discovered that these devices were in fact not the webcam Then I had used the quot Add a Device quot option under Devices and Printers in the Control Panel to try and find the webcam After letting it churn for ten minutes it appeared that Windows wasn t even searching anymore and I was staring at a blank window for nothing The only clue I have about the situation is after running DriverEasy it listed quot USB M UVC WebCam quot as a needed update but it also said quot unplugged quot beside the selection and was highlighted in red After attempting to download and install the driver the program had given me some Packard-Bell webcam driver that is most definitely not correct Packard-Bell still exists This had all started however when I made a clean install of Windows I had just spent the last two days scouring the web digging up my lost drivers and programs that had come with the laptop Everything s been successful save for this one element My webcam is lost somewhere in my laptop I just can t get to it If anyone has any ideas as to what s happened and yes I know it s a possibility the wiring is shot and how to fix the issue please give me any tips that you can I ve done everything possible in my power including trying to find the drivers but you obviously can t install drivers for devices that Windows doesn t even detect Oh before I forget my laptop model is Asus x v B if that helps in any way nbsp

A:Windows 7 cannot detect the built-in webcam on my Asus laptop

Was this laptop purchased with Windows 7 as the OS that was installed on it ? Or did it come with Windows Vista and you just wiped it out and put Windows 7 on yourself??
 

http://www.techspot.com/community/topics/windows-7-cannot-detect-the-built-in-webcam-on-my-asus-laptop.155636/
Relevancy 9.46%

Hi all,
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
 

A:Unable to install Nvidia driver and also to play games on Windows 8.1

I'd recommend to do the following:

Perform a clean install of Windows

Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.

Let me know how it goes after you've tried what I've mentioned.
 

http://www.techspot.com/community/topics/unable-to-install-nvidia-driver-and-also-to-play-games-on-windows-8-1.213781/
Relevancy 9.89%

I'm trying to connect my PC and my Asus Zenfone 2 with Bluetooth. When I use the "add a device" wizard on Windows 8.1, my mobile phone is detected, but when I try to add it I get: "Windows doesn't have a network profile for this device".

Also, when I try to detect my computer with my mobile phone, itīs not detected.

I'm using a Trust USB 2.0 dongle Bluetooth adapter (the little one you insert on the usb port) that came with a keyboard and mouse Bluetooth set that I used. Could that dongle be designed only for the bluetooth keyboard and mouse set?
 

A:I cannot connect my phone to my PC (Windows 8.1) with Bluetooth

The Bluetooth device seems fine as it already detected your keyboard and mouse. However, your phone seems not supported with the current Bluetooth device and you might need to take another look.
 

http://www.techspot.com/community/topics/i-cannot-connect-my-phone-to-my-pc-windows-8-1-with-bluetooth.215646/
Relevancy 18.49%

I am planning on building a small form factor PC but it will need RS232. I don't know for sure if there will be room for an add on card for the RS232. Is there a usb to RS232? If so, will it work as good as an add on card?
 

A:RS232 Question

Check out this link: TRENDnet USB to RS-232 . I do not personally own one, but I have used them at my job and they seem to work pretty well. You may have a driver issue, depending on the OS you will be using, but for the most part it works.
 

http://www.techspot.com/community/topics/rs232-question.215588/
Relevancy 18.92%

As seen on this site, the previous USB 3.0 drivers were v3.0.4.65 for Intel 8/9 Series Chipset. On Gigabyte's website for the Z97 boards, they also list USB 3.0 v3.0.4.65 as the latest for their boards. Now my question is, why on Intel's Download Center, is USB 3.0 v3.0.4.65 listed as Intel NUC drivers? Intel forum staff claim that version is for Intel NUC only, but it doesn't seem that way.
 

http://www.techspot.com/community/topics/usb-3-0-question.214845/
Relevancy 9.46%

Infinity displays are all the rage among notebook buyers these days. Dell's XPS 13 (2015) was an excellent example of what's possible when it launched earlier this year and now, they're bringing the gorgeous screen to its bigger brother. ...

Read more
 

A:Dell's revised XPS 15 includes gorgeous Infinity display, Windows 10

What's an Infinity screen?... Short answers please, I'm not interested enough to Google it.
 

http://www.techspot.com/community/topics/dells-revised-xps-15-includes-gorgeous-infinity-display-windows-10.213699/
Relevancy 9.46%

Much of the tech press regularly overlooks PCs for wearables, smart homes, and IoT-related topics but, in the real world and to many people, PCs still matter a lot. So, this week's news out of Redmond and Taipei (where the...

Read more
 

A:Windows 10, Skylake & Thunderbolt 3 bring the most compelling reasons to upgrade in a long while

Sorry.
No matter what others think about W10.
THIS is not a reason for an upgrade, if one has a choice.
Stay away from -remote host,-cloud centered OS.
Take your hardware and host your stuff by yourself.
Do not accept crippled OS (what unfortunaly OS X (since making iCloud a default location for files, belongs to).
 

http://www.techspot.com/community/topics/windows-10-skylake-thunderbolt-3-bring-the-most-compelling-reasons-to-upgrade-in-a-long-while.213622/
Relevancy 9.46%

Hi

Thanks for any help in advance..

I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..

I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.

Thanks
 

A:External USB hard drive not recognised on Windows after plugging it into a Mac

Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.

Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)​
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
 

http://www.techspot.com/community/topics/external-usb-hard-drive-not-recognised-on-windows-after-plugging-it-into-a-mac.200827/
Relevancy 9.89%

Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp

A:Windows 7 mouse freezing issues

This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.

http://www.howtogeek.com/howto/windows-vista/remove-old-drivers-after-upgrading-to-new-hardware/
 

http://www.techspot.com/community/topics/windows-7-mouse-freezing-issues.164226/
Relevancy 18.06%

Hi, Guys (And Gals) I'm attempting my 1st PC build and HAVE used the various online power supply calculators... however I'd like to hear some feedback from you all. No matter where I look online I always like to come here to be sure. My specs for the build are as follows:

MoBo: GIGABYTE GA-F2A68HM-H FM2+ USB 3.0 MATX
Amd A6 5400K 3600Mhz Blk Edt 1mb 65w Socket FM2


Video Card: XFX RADEON R7 240 2GB DDR3 LOW PROFILE
RAM: ADATA XPG V1 DDR3 1600 4GB

HDD: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G

I would really like to use one of the 350W or 400W power supply I stripped from my previous PC's. I'm thinking of hooking it to an HDMI or VGA projector eventually though (Haven't bought it yet) Can I get away with one of these and play a game like World of Warcraft? or do I need to order something like the
SolidGear 650W PS2 ATX Power Supply on Tiger Direct?

Thanks in advance for any advice & thoughts
 

A:1st Build Power Supply Question

Over engineer the PS;

Calculate the actual needed power,

add a fudge factor and

multiply by 1.5.
Then round up to the next commonly available size
 

http://www.techspot.com/community/topics/1st-build-power-supply-question.213326/
Relevancy 18.49%

Hey guys,

I have question about backbone networks. Need Help!

If an organisation has 3 departments.

Key servers are in different departments ? so a user from 1 department X reads and writes to file servers in another department Y. And both users access mail from a server in department Z.

The traffic and broadcast storms originating in one department is causing bandwidth saturation in other departments.

The core of the network is slow and is unable to meet the response time requirements of various critical business applications.

What is the solution based on core technology design, LAN technologies and design solutions to address inter-departmental traffic issues?
Thanks!
 

A:Question about backbone networks

The traffic and broadcast storms originating in one department is causing bandwidth saturation in other departments.Click to expand...

major faux paux. Broadcasts should not go beyond the current subnet.

I would guess

you're departments are co-located in the same building
and all are on one subnet
For large companies per the above, likely the 192.168.x.y is insufficient and your lan is using a subnet like 10.x.y.z for ease of network administration.

Broadcasts should be limited to resource online/offline and contained within the network segment where the device is attached. Users / systems in HQ do not need the status of a printer going offline the the shipping department.

Suggestions:

segment the departments into unique subnets
then add static routes between them according to their need
eg: the company domain server would be needed by all (dept <-> srvr)
including the email and directory system.

FEW departments need access to the sales group or its data

You need to analyze the departmental workflow to begin this project, and implement one network change at a time.
 

http://www.techspot.com/community/topics/question-about-backbone-networks.213243/
Relevancy 9.46%

Ahead of tomorrow's launch of The Witcher 3: Wild Hunt, Nvidia has released a new GeForce graphics card driver that's Game Ready for the open-world action RPG. The GeForce 352.86 drivers are also WHQL certified, meaning they are stable enough for everyday...

Read more
 

A:Nvidia releases new GeForce WHQL drivers for The Witcher 3, Windows 10

Mine were updated hours ago, you just can't beat GFE for this sort of thing (or for game display settings optimisation as far as I'm concerned, it works for me).
 

http://www.techspot.com/community/topics/nvidia-releases-new-geforce-whql-drivers-for-the-witcher-3-windows-10.213202/
Relevancy 9.46%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 18.92%

Hey guys I was wondering if I bought one of these if it would work it s a dvi-d to vga adapter The site says quot the adapter only works if your computer AND your monitor both support digital and analog quot I bought a new GPU but now I can t connect my vga output VGA question to DVI-D from my DVI-D to VGA question tv to my videocard There is a vga port but it s already occupied for my old crt screen On my older GPU I had a DVI-I port so I used a DVI-I to VGA adapter to connect the tv But now I ve got VGA HMDI and DVI-D ports I don t use the hdmi on my tv because the input lag is terrible cheap tv So I want to buy this adapter to fix my problem but I ve read DVI-D is only digital I m kinda confused on this My GPU and tv both support digital and analog as the site requests so is this gonna work or is it just a scam This also made me wonder why the hell they don t just put DVI-I ports on all videocards it s supports both analog an digital Which is far more convenient than having only a digital signal or am I missing something here Thanks for reading nbsp

A:DVI-D to VGA question

I've also found this adapter/converter. It's more expensive but it looks more trustable than the 1st one I posted.
 

http://www.techspot.com/community/topics/dvi-d-to-vga-question.211374/
Relevancy 12.47%

I have on same HD-500GB win7 and win xp. I conect another HD-320GB in sata drive. Bios recognize both HD, win 7 too, but win xp recognize only HD-500GB. When I go to disk manager in win xp it's same problem I only see one HD-500GB. Please help me.
 

http://www.techspot.com/community/topics/windows-7-recognize-hd-but-windows-xp-cannot.211791/
Relevancy 9.46%

Hello I apologize in advance for my almost complete lack of computer knowledge That said my PC was built for me by one of the IT guys at work who has since moved on I can t scare him card Good with Windows 7? graphics compatible up from his last known email addy So I m sort of out there drifting on this stuff trying to find any help I can The PC is connected to the home theater system TV through HDMI About weeks ago and video from the internet stopped producing sound In addition the PC doesn t Good graphics card compatible with Windows 7? play audio dvds anymore And when I click on the samples in the library I can t play them either I m assuming without knowing the graphics card is shot I think it s about four years old I opened up the box pulled out the graphics card I didn t make a note of manufacturer model but my device manager says it s nvidia and the driver is up to date and cleaned it I plugged it back in still no sound I can play youtube videos or stream online content but none of it has sound Does it sound to you guys like I need a new graphics card If so I need a recommendation for a better than average one that is compatible with windows professional something in the range or so Any help would be greatly appreciated Thanks nbsp

A:Good graphics card compatible with Windows 7?

Open up nVidia Control Panel.
Under Display select "Set up Digital Audio".
Verify settings to make sure they are correctly set up to send audio.
 

http://www.techspot.com/community/topics/good-graphics-card-compatible-with-windows-7.210597/
Relevancy 9.46%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 9.46%

Hello all!

I wonder if anyone could help me shed some light on the best process for the above subject.

I currently have a Dell Studio XPS 435MT (Vista 64bit) running two HDD's in RAID 0 (as from factory) I need to install Windows 7 64bit and would like to also install it onto the new SSD I have bought (Crucial 128GB) as an upgrade.

Could I simply take the current HDD's out (after backing up essential data) to keep safe as backup plan and add the SSD into slot 0 and install Windows 7?? Then possibly add say a 1tb storage drive to the system later?

One solution someone has sent my way is to clone the two 500gb RAID 0 drives to a single 1tb drive then install Windows 7 onto the new SSD and have both drives on a multiboot? Could this work?

I have seen/heard many versions of how to go about this install but no real evidence of a true way?

Any help would be much appreciated.

Kind regards,
Poke13
 

A:Dell Studio XPS 435MT - Installing SSD and Windows 7 64bit

It takes 3-500GB drives to give you 1.3TB of storage space because of formatting over-head. 2-500GB drives will be considerably less than 1TB. Keep the 2-500's in a single RAID array and set the SSD as a separate partition for Windows 7
 

http://www.techspot.com/community/topics/dell-studio-xps-435mt-installing-ssd-and-windows-7-64bit.199415/
Relevancy 9.89%

Is there a way to connect a displayport monitor to an IBM style PC? Found a new monitor in my brother-in-law estate and was wonder if there is a way to use it. Thanks for any help
 

A:How can I run a displayPort monitor on a PC using Windows 7

If the monitor and the video card in u'r computer have the same connections, and u have a power cable for it. It should work if it is new as u say. Try it and see. That should not cost anything.
 

http://www.techspot.com/community/topics/how-can-i-run-a-displayport-monitor-on-a-pc-using-windows-7.209543/
Relevancy 18.49%

I'm looking for an inexpensive router, any suggestion? The current router is downstairs, I plan plugging it in upstairs to boost the wifi. TIA
 

A:Router question

ASUS and TP-Link have some pretty good routers.. Do you plan to have Consoles (Xbox One, PS4, Wii U) using the network?? If so just ensure the router will properly support it as some older models may not work well with them.
 

http://www.techspot.com/community/topics/router-question.208909/
Relevancy 9.89%

Hi all I have a problem thats been ongoing for months and I just cant get it solved so im hoping you can help The problem is that whenever someone speaks in teamspeak ventrilo skype insertvoiphere my game volume drops to almost nil This volumes game Windows ducking is not a problem tied to any individual app as ive been through all the individual fixes to no avail such as volume control plugin disabled etc And the fact that every single voip program does it leads me to it being a windows option somewhere I have also gone into the sounds gt communication and have that set to do nothing It still happens It is not just with Windows ducking game volumes game either I tried different games and the sounds on every single one duck out when someone talks Also another note it also ducks out when I click to run any program on my pc via admin You know when the box pops up asking you if you want to allow this program to make changes to your computer where you click yes When the box pops up and it goes quot beep beep quot at that exact moment the game volume ducks out note - its only ducking game volumes too it doesnt duck out media player youtube vids or anything like this Please please if anyone can help me solve this issue it would be so appreciated Thanks nbsp

A:Windows ducking game volumes

I'm assuming that you are on Windows 7? Go to the sound icon on the bottom-right of the desktop, right click and select playback devices. Right click on your default device (Either speakers or an integrated chip set normally) and select properties. Go to the advanced tab and make sure that the Allow applications to take exclusive control of this device box is un-ticked.. and make sure that the give exclusive mode applications prioirty is un-ticked, then report back to see if it has worked (Don't forgot to apply and OK the changes).
 

http://www.techspot.com/community/topics/windows-ducking-game-volumes.192988/
Relevancy 18.49%

I am running Windows 7 Home Premium 64 bit SP1 AMD E 300 with Radeon HD 6310 Graphics.
I would like to be able to play a few of the newer PC games but when I try they seem to stutter and do not run smoothly.
Do I need to install a better graphics card? If so can someone recommend what kind I could buy and install without a high cost?
Thank you for any advice.
 

A:Upgrade question

The AMD E-300 (codename Zacate) is a dual core processor for small notebooks and netbooks. It offers a relatively powerful integrated graphics card and a single ...Click to expand...

It appears you have a portable device that likely doesn't have upgrade options. If your device maker doesn't list upgrade options on their website, you can likely scratch this idea.

Portables (Phones, Tablets, Netbooks, and Notebooks) are not designed with upgrading in mind. They are small and very limited with cooling capabilities. And most of the time everything is integrated in small form factors and can not be replaced.
 

http://www.techspot.com/community/topics/upgrade-question.209190/
Relevancy 9.89%

Hi, a friend of mine has dropped off a Mac HD to recover some pictures for him. He supplied the HD and a ProBox HDF-SU2. This I would think to be plug and play but no matter what I do including swapping to known good USB sockets the ext dive is not being seen. Windows is not even offering to install a driver for the ProBox HDF-SU2. Any help gratefully received. TIA
 

http://www.techspot.com/community/topics/probox-hdf-su2-ext-hd-enclosure-not-seen-by-windows-7.209068/
Relevancy 9.89%

Hi guys, I have set up a RAID 0 array using an XFX Revo64 controller card and the Netcell bios setup that cones with it. According to the Netcell bios the array is working but booting into 8.1 I cannot find the drive in explorer and device manager shows the Revo64 as "Generic Mass Storage Controller ".

I am very new to Raid this is the first array I have tried to setup. Any help would be greatly appreciated

Kind regards,
Jay
 

A:Windows 8.1 cannot find RAID array

Why not use the RAID card as more sata ports and then use windows to make your RAID array? I've never used a controller but im sure that it would work for that purpose.
just go on youtube and find a video on how to setup RAID in windows 8. I know its possible for windows 7 to im pretty sure 8.1 will have it
 

http://www.techspot.com/community/topics/windows-8-1-cannot-find-raid-array.208501/
Relevancy 18.49%

Ok first I know this is the hardware section but because of the nature of my question this is the best place I feel it should go I am upgrading my motherboard Upgrading cpu question mobo and and CPU from Asus M A TD-V EVO USB Xtreme Design ATX AMD Mobo and an Amd Athlon II x Ghz to ASRock Z Extreme LGA Intel Z HDMI SATA Gb s USB ATX Intel Motherboard and a Intel Core i - K Sandy Bridge Quad-Core GHz GHz Turbo Boost LGA Upgrading cpu and mobo question W Desktop Processor Intel HD Graphics Now all hardware does work but my issue seems to be a software issue more likely than Win bit which I need to get a hold of the disc my brother has was a family pack thing Anyway my question is pretty simple I Upgrading cpu and mobo question hope Without doing a fresh install of Win bit is it possible in any form to get the new mobo and cpu working like maybe using the repair method or installing over the current installed win Os so I do not have to back-up a ton of data and re-install lots of programs Also is there Upgrading cpu and mobo question any other work-around that might help I do have a Tb external Hdd I plan to backup my C drive with either way but it would be great if I did not have to do a fresh install Again sorry if this is in the part of the forums nbsp

A:Upgrading cpu and mobo question

Just back it up, bite the bullet, and reinstall Windows to get things right. An intel mb is not going to work right with the AMD drivers installed.
 

http://www.techspot.com/community/topics/upgrading-cpu-and-mobo-question.208395/
Relevancy 18.49%

Hello, I was recently given a Dell Dimension 2400 from a friend. It had absolutely no upgrades, however I had old parts sitting around and I gave it a bit of an upgrade. I put in 4gb of ram (however found out it had only supported up to 2gb, so I had to remove a card) and added a Visiontek Radeon 9200 graphics card in. Now, I have two processors here that look like the might fit, but I wasn't sure. So, I was hoping to get a second opinion from someone who has a bit more experience with this than I do. I have two spare processors

one of them is a Pentium 4 3.00Ghz (http://ark.intel.com/products/27479...g-HT-Technology-2M-Cache-3_00-GHz-800-MHz-FSB)

the other is a Pentium 4 1.6Ghz (http://ark.intel.com/products/27424/Intel-Pentium-4-Processor-1_60-GHz-256K-Cache-400-MHz-FSB)

Would either of them work? Also, would upgrading to windows 7/vista increase the support for ram? Thank you.
 

A:CPU upgrade question

Socket details:

Pentium 4 3.00Ghz is LGA775
Pentium 4 1.6Ghz is PPGA478
That is two different architectures.

Specs for Dell Dimension 2400




Intel Pentium 4 that runs at 2.2 or 2.4 GHz
internally and 400 MHz externally, or 2.266, 2.4,
2.53, 2.66, 2.8, or 3.06 GHz internally and 533 MHz
externally.

Intel Celeron that runs at 2.0, 2.2, 2.3, 2.4, 2.5,
2.6, or 2.7 GHz internally and 400 MHz externally.Click to expand...

Please note this would be PPGA478 architecture not LGA775.

What CPU is currently in the computer?

.
 

http://www.techspot.com/community/topics/cpu-upgrade-question.208387/
Relevancy 18.49%

Greetings. I have an Asrok Z77 Extreme 6 Motherboard.

I currently have an I5 3570K in there. I believe my Mobo is LGA 1155.

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.

Not sure if I will see any real increase in performance. I over clock the I5 to 4.2.

Any advice is welcome.
 

A:Question about my motherboard

Larsenex said:





Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.Click to expand...

Sorry, no. While your motherboard does have socket 1155, the processor i7 4790K is socket 1150. You'll need a new motherboard.
 

http://www.techspot.com/community/topics/question-about-my-motherboard.208311/
Relevancy 9.46%

hi guys wish you all a great new year.

im facing a very annoying issue with my laptop, some keys are not working, the left **** and the windows key I just don't know whats happening.

can someone please help mw with that.

thanks in advance.
 

http://www.techspot.com/community/topics/dell-inspiron-7537-shift-and-windows-key-not-working.207933/
Relevancy 9.46%

I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.

Any suggestions?
 

http://www.techspot.com/community/topics/i-hear-windows-startup-but-after-that-nothing-headphones-work-though.207890/
Relevancy 9.89%

Ive got a 2 yr old laptop that my parents bought for me at walmart of all places. I basically just use it for facebook, facebook games, and email. havent had any real issue til now. at first, when it was plugged in it would start up and let me log into windows but would immediately shut down. later it started going through a disk check when I turned it on and would shut off before it was complete. if the power cord was connected it would have a big red x over the power cord logo on the bottom right. I was going to factory reset it but I cannot get that far before it shuts off. bettery is fine and power cord is good. had them both tested. PLEASE HELP!!! IM VERY POOR SND CANNOT TAKE IT TO A REPAIR SHOP!! tyvm
 

A:Hp laptop w/ windows 7 trouble

It won't stay on long enough to do anything so this doesn't look promising. Have you tried removing the battery and just using the power brick?
 

http://www.techspot.com/community/topics/hp-laptop-w-windows-7-trouble.207751/
Relevancy 9.89%

I am trying to set up my Windows Xp computer as a VPN server I have taken the initial steps I get to the Accept Xp setup VPN hanging server Windows incoming connections screen and click okay The computer hangs for about a minute or so and then comes up with the following message Incoming connections depend on Routing and Remote access Windows Xp VPN server setup hanging service which was unable to start For more information check the system event log I presumed I had to go to control panel performance and maintenance Administrative Tools Event viewer I have already made sure that Routing and Remote access are enabled as well as Telephony I could not find Netbios in the services list and don t know where to Windows Xp VPN server setup hanging look for it Also when I try to start Routing and Remote access service manually I get the following message Windows could not start Routing and Remote access on local computer For more information review the System Event Log If this is a non-Microsoft service contact the service vendor and refer to the service specific error code- Can some one give me a step by step walk through of how to resolve this issue so I can connect to that computer from work over the internet nbsp

http://www.techspot.com/community/topics/windows-xp-vpn-server-setup-hanging.207658/
Relevancy 34.83%

Hello guys,
This is my first thread here, and my english is not that good also, so excuse me for any mistakes
I have my Prestigio PC for a 5 years and there were no problems. But today when I started the PC, a error occured.
On starting screen(American Megatrends GUI) there was written: "Primary IDE Slave: Not Detected" and after a few seconds my screen went black and "reboot and select proper Boot device or insert boot media into selected boot device and press a key" message appeared.
So I thought that I will just need to put my Win 7 CD to the CD-ROM, but then I found out I lost it while we were moving.
My BIOS is also saying that Primary IDE Slave is not detected
Is there any way to solve this problem? Is there any way to boot Win from USB?
Thank you for answers

Have a nice day!
 

A:Primary IDE Slave Not Detected on Windows 7 Ultimate

Open up the computer, check that the cables are properly 'seated' (pushed in all the way) on the drive and on the motherboard. I know you said it has worked for several years, but for it not to boot with the Primary IDE Slave not connected the only way that makes sense for this to happen is if the optical drive is jumpered to Master and the hard drive itself to Slave. That is a bit unusual. You typically would have your hard drive as Master and the optical as Slave. It doesn't really matter, as evidenced by it working in the past, it just isn't a 'normal' setup.

If the cables are seated properly (power and data), your drive could have failed.. 5 years is a decent lifespan for a hard drive.

You can make a bootable USB for Windows 7, although you can't without a working computer.
 

http://www.techspot.com/community/topics/primary-ide-slave-not-detected-on-windows-7-ultimate.207604/
Relevancy 18.06%

This ink cartridge http://www.epson.com/cgi-bin/Store/jsp/Product.do?BV_UseBVCookie=yes&sku=T048120[1]

Is labelled as "T048120-S" on some online stores... others it's labeled just as "T048120"

What does the "-S" mean? single cartidge?
 

A:Question about Epson printer ink model #

Probably means standard capacity.
 

http://www.techspot.com/community/topics/question-about-epson-printer-ink-model.207580/
Relevancy 9.89%

Hey guys, I was recently in the malware section, because my laptop had some problems and could not connect to the internet. Broni was very awesome and helped me clear my laptop up, but we still couldn't get it to connect to the internet. He advised me to come here for help.

I will link the previous thread, because there are some log files toward the end I think would be much more helpful than me explaining problems.

http://www.techspot.com/community/topics/infected-laptop.206911/page-2#post-1444892

Thank you so much for any help.
 

A:Trouble connecting to internet (Windows 8)

Can you try to re-install the WiFi driver?
 

http://www.techspot.com/community/topics/trouble-connecting-to-internet-windows-8.207500/
Relevancy 9.89%

This all started after I reset the router putting in new pass code I m using same name of the old SSID When you click to Windows SSID was to unable connect on the wireless network connection on the name of my SSID on connect it saying Getting information from SSID this sounds like Windows was unable to connect to SSID good thing that windows can see the router and talk to it Type in the network key same thing looks like windows can see the router and talk Windows was unable to connect to SSID to it I type in the network key and OK Than it is saying windows was unable to connect to SSID name I have set up other computers and it can connect but this one computer running windows cannot I have the pass code down on paper and other computers can connect So wrong pass code is not the case The only thing I can think of is is computers using the old profile or my network card may need to be reset When I open networking sharing center and click on manage wireless networks I removed the old profiles in the list But I m not sure if there is still some kind of conflict or the old setting still there some where Well because I m using the same SSID despite the router reset and new pass code I m not sure why I cannot connect unless Windows was unable to connect to SSID the windows thinks I m connecting to the old SSID I tried to restart the computer and no change nbsp

A:Windows was unable to connect to SSID

Force the system to forget that SSD and then reboot.
Now look for it again and enter the passphrase.
 

http://www.techspot.com/community/topics/windows-was-unable-to-connect-to-ssid.207365/
Relevancy 9.46%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
 

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
 

http://www.techspot.com/community/topics/windows-7-computer-says-connect-via-ethernet-and-ping-confirms-but-cannot-get-to-any-page.207373/
Relevancy 9.03%

I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
 

A:Recovering Lifelong Memories from Windows Recovery-Wiped External Hard Drive

There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
http://www.ylcomputing.com/content/view/350/153/
Obviously it's worthwhile trying both of them.
 

http://www.techspot.com/community/topics/recovering-lifelong-memories-from-windows-recovery-wiped-external-hard-drive.207350/
Relevancy 9.89%

Hi I had this problem a DVD-R 7 Won't Windows Vaio read - couple months ago fixed it and am now facing the same problem again I have a Vaio Windows My CD DVD player isn t reading any of my DVD-R cds Whenever I put in a DVD-R cd autoplay comes up and it asks to format the cd I checked these DVDs and they work on other computers They re all burned DVD with files on them Before when this happened I tried many different things I Deleted upper lower filters -- Actually I didn t have upper or lower filters to delete System restored Deleted and updated drivers Finally found a post talking about creating a new key in the regedit NoCDburning After doing this it started working Fast forward three months later my cd dvd player won t read any Vaio Windows 7 - Won't read DVD-R of my DVD-R cds again I did the same things all over again System restored Deleted and updated re-installed drivers Ran Fixit Looked for upper lower filters -- not there Tried looking at the NoCDburning thing again -- deleted and repeated the steps and nothing is happening I don t want to reboot my computer because I already did a month ago and it just takes way too much time for me to reboot everything all over again I cleaned my CD player as well like most of you guys said before I know my drive is still working as it worked before after I fixed it I checked and the last time this happened was in June Since then the only new things I installed updated were CC Cleaner Itunes and some other programs I have Spybot as well Can someone please please please help me I ve been looking for an answer everywhere and I m running into the same answers Thank you nbsp

A:Vaio Windows 7 - Won't read DVD-R

Have you tried a a system file check to see if Windows can sort this issue out?
sfc /scannow (in admin mode.)
Also if you just explore the DVD do you see the list of files on it? Or is the DVD-R not 'seen' by Windows at all?
Or is the error only with the autoplay part? (Windows trying to help you choose a media player from whatever you have installed?)
 

http://www.techspot.com/community/topics/vaio-windows-7-wont-read-dvd-r.206920/
Relevancy 18.49%

Hi all. So I was wondering if you guys had any opinions on gaming headsets for pc. My headphone jack for my computer isn't working so I don't think I can use any wired headsets (if I'm wrong on this please let me know). So I was looking into wireless ones, preferably $100 and under. The three I narrowed it down to were the corsair 2100, turtle beach px4 or 5 (from amazon or ebay) and the PDP afterglow kral. Anybody have any opinions on any of these ones or any other ones you would recommend? Thanks for any help on this!
 

http://www.techspot.com/community/topics/pc-gaming-headset-question.207127/
Relevancy 9.46%

Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp

A:Clean install Windows 7 - FN Keys (Touch/slider) not working

Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.

That'll teach you to mess with Windows when a cd/dvd plays up.
 

http://www.techspot.com/community/topics/clean-install-windows-7-fn-keys-touch-slider-not-working.207046/
Relevancy 9.46%

Hi,
My USB drive is enabled. The USB flash drive or any other storage device is recognized when connected to my laptop. But when I click on the drive in windows explorer, it says access denied. The same works fine in other laptops. I have admistror previlages. There is no local group policy set up on Removable storage access. I have searched multiple forums and tried out various options, but still cant connect to my USB drive. The drivers are successfully installed and are the latest. This happens even when I connect my camera or mobile phone. It shows up as 'Removable Disk' in windows explorer, but cant access it. I have given authorization to the drive as well. Please help.
Dnana
 

http://www.techspot.com/community/topics/usb-flash-drive-is-recognized-but-still-cant-acess-windows-7.207068/
Relevancy 24.94%

This mobo got me wondering, packs alot of specs :
18 SATA ports (10 are SATA3 ports from the Intel X99 Express chipset, 8 are SAS ports stemming from the LSI SAS 3008 controller) and five PCI-E 3.0 x 16slots for 4-way graphics cards! 600$ motherboard for some serious business, I think this would be ideal for a video editing workstation..
 

A:Ultimate server / Workstation mobo? Asrock X99 Extreme 11

I'm probably one of the few that uses the ASRock Z87 Extreme11
There is always a market for their Extreme11 series boards. I use mine for a bounch of stuff gaming, media server, video editing with all 22 SATA ports even 2way SLI. Might be a bit over kill 4 way SLI but who knows...
 

http://www.techspot.com/community/topics/ultimate-server-workstation-mobo-asrock-x99-extreme-11.206694/
Relevancy 18.49%

Hey, I wanted to update my cpu stock heatsink to something new sense this one sucks and I was gonna get
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103099
for my cpu http://www.newegg.com/Product/Product.aspx?Item=N82E16819113348
but I wasn't sure if that huge cpu heatsink would fit in my case, could anyone give me advice whether it will or not I am still new to building, Thanks!
This is my case - http://www.newegg.com/Product/Product.aspx?Item=N82E16811147166
 

A:Cpu heatsink question

You can try to use partpicker (needs a valid email to save parts list) to test your builds. a warning will show for any possible incompatibility.




https://pcpartpicker.com/parts/partlist/Click to expand...

based on newegg product, it seems able to handle 'full sized cpu coolers'




Rosewill Line-M
This review is from: Rosewill LINE-M Micro-ATX Mini Tower Computer Case, Dual USB 3.0, come with Dual Fans, Support up to 4 Fans, 12.5" card-Retail

Pros: Size, Appearance, USB 3.0 Front Panel. I own two of these one with fx8350 and one intel 4770 both with r9 280x gfx cards. Cable managment is tough but I expected that with the amount I packed into this form factor. Keeps my gfx cards around 70 degrees on stock settings. Fits full size CPU coolers. This is just about the perfect size for a computer case in my opinion.
Cons: bent the back panel slightly removing cut outs for PCI and PCIe mounts other than that no complaints really.
Other Thoughts: Get a modular PSU for this case.Click to expand...

based on partpicker:




http://pcpartpicker.com/p/Bb4TJxClick to expand...





Compatibility Notes
Unable to verify the Rosewill Line-M MicroATX Mini Tower Case and the Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler are compatible.Click to expand...


 

http://www.techspot.com/community/topics/cpu-heatsink-question.206154/
Relevancy 18.49%

My gaming computer turned in February and now that it s no longer under warranty things are going wrong This week in the middle of a project the machine rebooted on its own It restarted but shortly after did replacement PSU question it again and again I still have free tech support and two tech s offered help on what could be causing it First I replaced the cooling system thinking the PSU replacement question one installed failed and the cpu was overheating doing it It still rebooted I purchased software called Hardware Monitor to see if the power supply voltage was bad but it seemed ok then I swapped out the memory in case there was a bad stick It still rebooted My support tech feels it still could be the power supply and suggested I replace it I was told that I would need to buy the exact model and that buying any other would require a complete rebuild of my PC Since the computer is years old the power supply isn t sold anymore I was wondering if it s true that my computer would need to be completely rebuilt if I bought a PSU that wasn t the same The power supply is a Enermax Galaxy EVO w model egx ewt My computer was made by Digital Storm More system details available if needed nbsp

A:PSU replacement question

1. What hardware do you have in your system that needs such power? We need your hardware specs: CPU, GPU, amount of RAM, drives, etc.
2. Why does he believe a complete rebuild is necessary because that particular psu isn't made anymore? Is it a special size? If your case is to standard specs then see point #3.
3. Who is this support tech? Does he work for Digital Storm by chance? Check these psu's that will more than meet your power needs: http://www.newegg.com/Product/Produ...07657 600479299&IsNodeId=1&name=1200W - 1499W
4. Before you spend any $ find someone who has a digital volttage meter and test your psu to see if that is really the cause.
 

http://www.techspot.com/community/topics/psu-replacement-question.205941/
Relevancy 9.46%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
 

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
 

http://www.techspot.com/community/topics/windows-installation-cant-detect-my-ide-hard-drive.192208/
Relevancy 9.46%

Hello...I will start from the begining .

I bought the Acer V5 and tried booting it up...it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.

Petar
 

http://www.techspot.com/community/topics/acer-v5-booting-windows-installing-issues.205294/
Relevancy 9.89%

I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
 

http://www.techspot.com/community/topics/trying-to-install-nvidia-quadro-nvs-259-on-windows-7.204678/
Relevancy 18.49%

Hi guys,
My wife's Galaxy was hacked and sent emails out to her entire contact list.
The message contains a link that may provide a clue to who did it.
Is there a way to possibly isolate and open the link to view it without letting whatever it is destroy/spread/etc?
 

http://www.techspot.com/community/topics/odd-smartphone-question.204534/
Relevancy 18.06%

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping
 

A:Upgrading CPU, question about motherboard compatability

Vidosoli said:





Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping Click to expand...

No, that motherboard is LGA 1156 while the i5 4670 is LGA 1150. You would need a new motherboard to go with that CPU>
 

http://www.techspot.com/community/topics/upgrading-cpu-question-about-motherboard-compatability.204453/
Relevancy 18.49%

I am using a corsair H60 liquid cooler. Am I going to get better cooling results by putting the radiator on the top of the case and sucking room temp air in through the radiator and then pushing it out back with another fan(plus a front fan intake also). Or am I not going to notice anything by just having my front intake fan and push the air out through the radiator with a fan? Thanks.
 

A:Cooling question

It is probably best to push air out of the case with the radiator since that will probably lessen the amount of dust that comes into the radiator. That is my opinion though. Maybe someone else thinks otherwise.
 

http://www.techspot.com/community/topics/cooling-question.204467/
Relevancy 9.89%

Recently I noticed that my laptop speakers aren't working consistently at all. Sometimes I watch youtube, listen to pandora, and everything will work fine. Other times it won't work at all. I've been getting by like this for a week, but now it seems like now the only audio my speakers will play is a notification sound. I still have the computer under warranty, and I can take it into the store and get the speakers fixed. However, I was wondering if there was a way I could skip all the trouble/paperwork of taking it back in? maybe I just clicked something I shouldn't have?
Any tips are hugely appreciated!
 

http://www.techspot.com/community/topics/windows-8-laptop-speakers-are-inconsistent.204097/
Relevancy 18.49%

Hello I am looking to upgrade my current pc will post specs below and am wondering what will give me the most bang for my buck as my budget is limited a $600 with budget only Upgrade question and I may not have the funds to upgrade again for a while Current PC specs Intel Core i LYNNFIELD GHz GB ram and a Geforce EVGA GTX ti GB I was set to order a new MB ram cpu and another GTX ti to run sli My new pc would have been this was all within my budget Intel Core i - K Processor GHz GB ram ASUS Z PRO LGA Motherboard Geforce GTX ti GB x Ive had some people recently tell me the most bang for the buck would be just spending almost all of it on a video card as thats where the bottleneck for most games is I can see that being true but my cpu ram and mb are about years old I still think Upgrade question with only a $600 budget id get more performance for the overall package but im far from an expert and could use any advice and or suggestions Also im a but Upgrade question with only a $600 budget hung up on going from a I to a I but the newer cores have to make up for whatever difference there may be right Thanks and sorry if I put this in the wrong spot nbsp

A:Upgrade question with only a $600 budget

Does your current system not support SLI?

And does you PSU provide enough power for the two 660Ti?
 

http://www.techspot.com/community/topics/upgrade-question-with-only-a-600-budget.203890/
Relevancy 18.49%

Hi Everyone,
I'm new here so I'm not very aware of the things going on. But I'm desperately posting this because I want some good answers and advice regarding my PC. And I'll appreciate any response.

Now here's my question. I recently bought a PC but not the kind you'd want as a gamer. I want to know if it's possible for me to replace its current Video card to Higher one, I mean a Graphic card capable for gaming and compatible for my system. Also about the RAM, I want to know if it's OK for me to change it to like 16g? My current Video card is NVDIA GeForce GT 620 1g. -


 

A:Just a Simple Question :)

It mainly depends on your power supply, motherboard, and your computer's case on whether you can upgrade your video card. Chances are your power supply will be the most limiting factor on your machine. You could bump up to something like a 750 Ti without much concern about the PSU but anything higher and you'll likely need to change that part out also.

As far as the RAM goes it's all motherboard and what you've already got installed. You might end up having to remove some of your memory modules in order to put higher capacity ones in. That shouldn't be an issue with the Core i3 though - 16GB should be easily attainable.
 

http://www.techspot.com/community/topics/just-a-simple-question.203779/
Relevancy 18.06%

So I built my system using this SSD caching It works really well My hard drive is terrabyte and my Cache drive is a gig ssd Lately while a Intel Storage Rapid Technology question.. playing Star Wars the Old repubic I have been freezing Intel Rapid Storage Technology a question.. in game This freezing completely locks the computer I run Teamspeak and I can still push to talk and my friends can still talk and I can talk to them via this during the freeze What is odd is Cnt alt delete will not bring up the control panel to allow me to kill the game I am just stuck Normally I would say this is a Video driver issue I did cleanly reinstall the latest Nvidia driver and this will still occur sometimes Now when I disable RST I never get the problem I can play and play and play When I reactivate RST to maximized I can still play but its like a timer After about or days the Freeze will happen So my RST question is has the driver been updated since when I built my computer and is it possible to update this driver now without having to re-install Windows and all my programs If I am left with having to re-install I am likely to just fork over the money and just buy a gig SSD and keep Windows and or of my favorite games on it and use the Terrabyte drive for Music videos and storage nbsp

A:Intel Rapid Storage Technology a question..

Yep, there's 2013 versions for Win7.

https://downloadcenter.intel.com/Se...=IntelŪ+Rapid+Storage+Technology+(IntelŪ+RST)
 

http://www.techspot.com/community/topics/intel-rapid-storage-technology-a-question.203611/
Relevancy 9.89%

I have a Windows 8.1 Laptop and yesterday it said I had no connections.
My computer is wireless but then it went to Ethernet it didn't let me connect to anything either.
I tried looking things up to see how to fix it but it just kept talking about buying cables.

Anyone know whats wrong?
 

A:How to fix Windows Laptop When it goes from wireless to ethernet

You may try to disable your Ethernet adapter (wired connection) while you're connected via a wireless connection through your wireless adapter.
 

http://www.techspot.com/community/topics/how-to-fix-windows-laptop-when-it-goes-from-wireless-to-ethernet.203484/
Relevancy 9.46%

Hi, not great with computers and had a look around at various forums and can't find a solution to my problem.

Essentially, whilst I can view the wireless network connections available, I cannot connect to the wireless connection I want to although all other computers at home can connect.

I think the issue is that I have no IP address on this computer (using Windows XP that has just been reinstalled). The result of ipconfig/release is:
No operation can be performed on Wireless Network Connection 2 while it has its media disconnected.

Sorry if further information is required, will provide whatever is needed. Thanks for any help!
 

A:Wireless Connection Media Disconnected (Windows XP)

First disconnect any wired connection and THEN attempt the wifi.
Something called DHCP is responsible to give the PC an IP address and also the DNS addresses (regardless of wired or wireless).
 

http://www.techspot.com/community/topics/wireless-connection-media-disconnected-windows-xp.203103/
Relevancy 8.6%

Hi all

I have got a new desktop PC, which works fine with Ethernet but I am not able to connect through wireless.When I tried to connect to the broadband, it says error connecting to the Broadband connection
Error 651: The modem (or other connecting device) has reported error. However, same comnnection works very well with my vista home premium Dell Laptop.

Thanks in advance
Pxray
 

A:HP Pavillion PC with windows 8 works ethernet works well but not able to connect through wireless

How to reset TCP/IP by using the NetShell utility
 

http://www.techspot.com/community/topics/hp-pavillion-pc-with-windows-8-works-ethernet-works-well-but-not-able-to-connect-through-wireless.202705/
Relevancy 9.46%

Hi there
need to know if I can upgrade my graphics card for upgrade to windows 7.
current graphic card:ati radeon 9200 se 128mb ddr tvo
computer :fujitsu siemens scaleo 600
motherboard :microstar ms-6585 2.oa
power supply:dc output 250w
thanks so much.
learner1
 

A:Graphics card update to host windows 7

I don't know if you CAN upgrade your graphics card, but:

You most likely don't NEED to.
It's not really a good idea to upgrade at all. Those parts are old as dirt and you won't find anything cheap that'll fit.

 

http://www.techspot.com/community/topics/graphics-card-update-to-host-windows-7.202568/
Relevancy 8.17%

Hello
I have an Acer E1-571 suddenly I have an X on my audio controller icon on home page and no audio devices in control panel. I have tried installing sound video and gaming controllers and then tried to install update but it says best already installed and still no Audio.
Any and all help greafully appreciated and many thanks in advance
 

A:Audio Disabled no audio devices windows 8

Look for audio drivers on the motherboard CD delivered to when after purchasing your system. If you can't find it or don't have mobo CD around, navigate to manufacturer website and download driver for audio device from there.

Good luck!!
 

http://www.techspot.com/community/topics/audio-disabled-no-audio-devices-windows-8.202541/
Relevancy 9.46%

Hello all,

I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:

"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.

Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.

Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .

Can anyone please help me with this issue?

Regards,
Adrian
 

A:HP Pavilion 15-n252sq - Can not install Windows over Free Dos

You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
 

http://www.techspot.com/community/topics/hp-pavilion-15-n252sq-can-not-install-windows-over-free-dos.202523/
Relevancy 9.46%

Hi all,
I am writing because from few weeks I can not solve this problem of connection:
if the computer is in safe mode there aren't problems, while in normal mode, the following programs don't connect / update:
Internet Explorer 11, Dropbox, Malwarebytes, Mozilla Thunderbird, Flash player update, Java update, StartUp Delayer.

While Firefox, Chrome, Emsisoft Anti-Malware (Antivirus), Online Armor (firewall), and other programs work and update normally.

I've tried and tried various "solutions" found in the Web and in the Forums, but without any result.

I noticed that Dropbox and StartUp Delayer "tell" me that's is probably a Proxy problem.
I honestly have never used a proxy, and tried in every way possible to disable any proxy, but nothing changed, same issue.

I tried uninstalling antivirus and firewall, but the issue still remain, the same as resetting the connection settings and even Windows Firewall (which is usually disabled).

This problem is present both with ethernet connection and wireless.
I use a HP dv6000 notebook with Windows Professional 64bit.

I thank you if you can help me, because I really don't know how to fix this problem =/

Thank you,
Elia
 

A:Windows 7 - only connect to internet in Safe Mode with some softwares

I MIRACULOUSLY solved this situation!

Among the many details I forgot to say that for the connection I use a router, and after several attempts to copy the settings from a computer connected to the same network, I tried to enter the DNS entry of the parameter TCP/IPv4 (in connection properties) 192.168.1.1 and 192.168.1.7 ..and all began to work perfectly.

I can not explain, howeve, why the other computer works even without these two values.

But I'm happy that this (strange) situation is solved, and hope this can help someone else

Have a nice day,
Elia
 

http://www.techspot.com/community/topics/windows-7-only-connect-to-internet-in-safe-mode-with-some-softwares.202509/
Relevancy 18.49%

I have a Lenovo Thinkpad T430 that I configured with 4 gigs of RAM (budget constraints at the time). It is in single channel (Lenovo never mentioned this tidbit of info; the sad part is both my wife's and daughter's 1st Generation Thinkpad Edge came with 4 gigs of dual channel at 7 timings). My CAS Latency is currently 11.

I am wanting to double the RAM to 8 gigs dual channel and I have the option of CAS Latency at either 9 or 11.

This laptop is used for business such as Office work, internet, email, streaming video, etc. In real world applications would I even notice the difference between my system running either 9 or 11 timings?

Thanks.
 

A:CAS Latency Question

I dont think it makes much of a difference. But of course, lower latency is better, but it doesnt mean it will bring a big performance boost. The boost will be miniscule.
 

http://www.techspot.com/community/topics/cas-latency-question.201710/
Relevancy 18.06%

So newegg is offering the Acer 29" B6 B296CLbmlidprz IPS monitor for about 350. Seems like a pretty good deal but I can't find many reviews on it. I was wondering if anybody had any experience with this monitor and/or if you guys have better options for someone who is looking for an IPS monitor below 400 bucks. I want to game with it as well as do some 3d modeling and photoshop work. So I need reasonable response time for gaming. I was also looking at the HP ZR2440w and was gonna get that until I saw this deal on newegg for a larger monitor. 24" models are fine but if there are good deals on some 27" inch ones then I would be interested in those as well. Any suggestions? Thanks.
 

A:Question on Acer 29" monitor and other monitors

Heres the link for that monitor.
http://www.newegg.com/Product/Product.aspx?Item=9SIA24G1GC2421
 

http://www.techspot.com/community/topics/question-on-acer-29-monitor-and-other-monitors.201698/
Relevancy 9.46%

I recently built this computer see other a thread on building a PC using Windows on a ssd drive and I used my sata drives for storage audio video The other drives folders using Can't 7 storage create Windows on drives are from my old system and they were set up for RAID I re-formatted the drives but now they automatically create a system info folder and a recycle bin folder I don t know why but Can't create folders on storage drives using Windows 7 I can t create a folder on these drives They are patitioned NTFS Does this have something to do with the RAID configuration from my old system I need to create folders to manage my projects but it will not allow it Also I installed Norton on the system I am using the internet for downloading programs I need once everything is going smooth I will no longer access the web with this PC The Norton has an error on it and when I try to fix it it gets stuck on trying to optimize the storage disk E My SSD is drive C with a partition D for B U the next drive is E Does anyone know what I am doing wrong Thanks to anyone who can speak to this problem nbsp

A:Can't create folders on storage drives using Windows 7

Which RAID Configuration are you in? I think you may have have it set up incorrectly. Depending on what RAID you are using will depend on how your drives can be used. Let us know what RAID you are running which you should be able to find this in your RAID control panel when you boot into it. Thanks.
 

http://www.techspot.com/community/topics/cant-create-folders-on-storage-drives-using-windows-7.200888/
Relevancy 9.89%

Hello

We need to restrict several Windows 7 (32) desktops with staff, Server 2003 really does not have anything, same as Win7 GPEDIT, seems to be all or nothing, however,

From the Windows 7 desktop:

- Windows 7 Explorer
- Go to the DVD\CD
- Right-Click Properties
- ?Sharing?
- Advanced Sharing
- ?Share this?
- Permissions
- Add Domain (User1, User2, Etc) or create a Domain group ?AllowWin7CD? and add user to this,
- Remove default ?Everyone?

Anyone see a security or problem with this? Simply sharing as a network resource and assigning domain rights.

B.
 

http://www.techspot.com/community/topics/windows-7-and-restricting-controlling-cd-dvd.201089/
Relevancy 34.4%

Just bought thermal take challenger ultimate keyboard and having a problem when when I plugin the keyboard it override the windows sound and goes off, tried with 2 pcs win 7 and win 8 same thing no sound
want a solution
 

A:Thermaltake Challenger Ultimate overrides Windows' sound

Got the same problem..
 

http://www.techspot.com/community/topics/thermaltake-challenger-ultimate-overrides-windows-sound.185346/
Relevancy 9.46%

Hello I got a weird one for you guys and I literally have tried everything can think of so I am hoping someone has some new fresh ideas I have a Dell Latitude E that can no longer connect via wired or wireless connections Both adapters display yellow exclamation marks next to them and in the properties of both adapters says Windows cannot install because the drivers are not recognized Error Both adapters are also missing from the adapter page in network settings I have download the most recent versions of the driver and installed no luck I have downloaded previous version of the driver from dell and installed no luck I download the driver directly from Intel and installed no luck Tried a BIOS update nothing Tried to reset to defaults nothing So I decided I would rebuild the is one Windows 31, not NICs weird Error this working 7 machine and SURPRISE that worked for a week and then the problem started again So my first thought is well maybe its a bad motherboard so I swapped the HDD with another Dell E boot it up and NICs not working Windows 7 Error 31, this one is weird both connections are working In the laptop with the drive from the bad laptop it can no longer connect now so the problem is related to windows and follows the drive Does anybody have any idea whats happening hear I am all tapped out of ideas Thanks let me know if you need any additional info Dell E Windows Enterprise auretsky vailresorts com nbsp

A:NICs not working Windows 7 Error 31, this one is weird

"so the problem is related to windows and follows the drive"... Re-install Windows on this drive. Error 31 relates to a bad driver that may be reflected in the device manager
 

http://www.techspot.com/community/topics/nics-not-working-windows-7-error-31-this-one-is-weird.200795/
Relevancy 9.89%

MY WD 500GB USB HD just yesterday stopped working normally, it was working fine two days ago. When I connect the drive via USB it appears as a different drive letter for some reason Local Disk : I then disappears. My laptop makes two noises one that I've connected a device to the laptop then another noise which is when I disconnect a device. It makes this connection/disconnection noise when the HD is plugged in numerous times every minute or so.

The HD doesn't appear in windows explorer but appears in devices.

Very strange and unusual any ideas?
 

A:WD 500GB USB HD not appearing in Windows Explorer

Can anyone assist??
 

http://www.techspot.com/community/topics/wd-500gb-usb-hd-not-appearing-in-windows-explorer.200467/
Relevancy 18.49%

I have to be at a meeting in about 2 hours. We are on the beach in South Carolina. Our ISP, Hargray, constantly goes out. We are a condo association and have a group connection with little radio connectors in each building. We are more out than on line. I did a speed check and get a dl of 11.24, and an ul at 1.18. Does this matter in affecting my internet connection? I have an ipad and laptop and both get get nada. Please give me something to take to my meeting to make an intelligent statement. Thank you.
 

A:Internet Question Needs Quick Help

How did the meeting go?
 

http://www.techspot.com/community/topics/internet-question-needs-quick-help.200367/
Relevancy 9.89%

Sorry if it s the wrong section Hi guys I have a problem with my new keyboard I am running Windows and I ve tried on other computer on windows The quot Fn quot key doesn t work On the box it s says the keyboard comes with shorcuts like Fn F Computer If I try a quot test key program quot it doesn t seem to recognize it Please tell me what to do My keyboard I think it s a no-name keybaord quot digittex quot I could not find any drivers for it Please help Take a look at this pic http gyazo com b c a bb ec bcc ee on FN problem Windows 8.1 key d e png That is my keyboard - gt Shows that I have a quot Media quot button I also have play pause volume down and volume up All that are working - gt You can see the images of quot Internet Explorer Favorite Search - gt The windows doesn t recongnize the quot Fn quot key so I cannot acces the keyboard quot shorcuts quot Take a look at this FN key problem on Windows 8.1 pic too http gyazo com eae a f d fbf fb e png That s what it says on the box - gt You can see quot FN quot amp - gt You can see what it supposed to do Ex FN F My Computer Help me please nbsp

Relevancy 9.46%

Hello everyone,

I'm using windows 7 on my pc and try to connect to my home wireless connection .
every time I try to connect and enter the password, it won't be connected.
However, I'm using my laptop and phone to connect and it worked properly.

Please help my problem
Thanks in advance
 

A:Windows 7 unable to connect to wireless connection

How is your wireless Configured. I have seen many issues when using mixed mode in certain Linksys or Cisco Products. What kind of adapter are you using on y our PC for wireless Connection? Has it ever worked?
 

http://www.techspot.com/community/topics/windows-7-unable-to-connect-to-wireless-connection.199928/
Relevancy 18.49%

Hi there Tech Forum thanks in advance for your help - I have a question about a LAN and stuff There is a modem and a wireless router with LAN ports In one of them there is conected also a switch Network LAN Question with LAN ports - Some weird things have been going on I always get a wireless connection so LAN Network Question no problem there Issues appear with the wired network On one hand I had many times an unidentified network a x x x ip and no LAN Network Question network Nothing changed in configuration on my box or the router and got to connect at MB s while if connected through wi fi I got LAN Network Question more than MB s From a moment on again unidentified network and no signal in the adapter a yellow light would blink quick So now after touching the cable and a little bit of despair not driven to the computer by the way I have a full conection by lan and by wi fi both at a good speed AND weird for me a green light on and the same yellow blinking - So main questions are - What does the green light ON not blinking means - Could there be a difference due to the cable manipulation - Is there a gost inside my router D Thanks a bunch to all of you I try my best to understand computers so now I am happy with the connection but curious on the rest - Regards nbsp

A:LAN Network Question

How new are these devices? Are you using new 'patch' cables? Is DHCP running on only one of the devices? Seems weird that "touching the cable" caused a change.

1. The LEDs differ, but usually one signifies a connection [on/off] and the second signifies activity [blinking]
 

http://www.techspot.com/community/topics/lan-network-question.199370/
Relevancy 18.06%

Hey guys, I've been looking for a GFX card to upgrade my HD6870. I've already decided to go with an AMD R9 280X, I just don't know which model to buy yet.

Right now, the MSI 280X seems like the best option to me. But I use 2 monitors and the MSI 280X only has these connections:
Dual-link DVI-I x 1
HDMI (version 1.4a) x 1
Mini DisplayPort x 2

The monitors I use are a BenQ XL2411T (144hz) and a NEC LCD22WV (old).
The BenQ has: D-sub / DVI-DL / HDMI x 1
The NEC has: VGA 15 pin D-sub x 1

Would I be able to use my NEC screen with the MSI 280X and use my BenQ at the same time, with 144hz refresh rate? I read somewhere that a newer type of HDMI supports at least 120hz, though I couldn't find a clear answer to that. I am willing to purchase converters if needed.
 

A:Simple question regarding GPU - Monitor connections

I'd connect BENQ via DVI, then use miniDP > DVI > VGA adaptors for the NEC.

Also I don't know what games you are playing, but you're not going to get 144fps @ 1920x1080 with a R9 280x on most games.
 

http://www.techspot.com/community/topics/simple-question-regarding-gpu-monitor-connections.199311/
Relevancy 18.06%

This is not intended to be a sob story but I just want you to know what it is all about. I have a niece that is slowly deteriorating from MS. She does not have much that she can do anymore but one of her enjoyments is playing a game called WSOP Challenge (world series of poker challenge). Right during Christmas the game stopped working and Sprint can't seem to help her get it back on her phone. She called me asking if I knew what to do and I tried but could not find any info on what she needed to do to get it working. Sprint told her to delete it from her phone which was not a good idea because I have found no where that she can download it from and put it back on her phone. Would anyone be so kind to give me some advice on how to fix her problem. Time is not on her side but what she does have left I want it to be very enjoyable. Thanks so much for your help.
 

http://www.techspot.com/community/topics/lg-rumor-phone-and-game-question-very-important.199220/
Relevancy 18.49%

Recently bought the GPU and realised that my current power supply wasn't quite good enough, so I went and bought an "emergency" PSU locally. Specifically an 850w PSU by Power Zone.

Now the GPU is amazing but sometimes I struggle to run some games on full settings, such as Assassins Creed 4, Shadow Warrior, etc. , and obviously I bought the card with intentions of running games on ultra with decently good FPS.

Now to the point, is it the PSU that could be holding me down? The recommended wattage on the AMD site stated it to be 750w. and I do believe that my system specs are pretty much good enough.

I'd also like to point out that a friend recently got a Radeon 7950 and claims to run above mentioned games on full settings with no problems. Again so he claims

Also included dxdiag info
 

A:Question about AMD Radeon 7990

May we ask what you and your friends PC specs are? It could be other variables at fault.

Never mind! Just noticed the specs are listed in the txt file.
 

http://www.techspot.com/community/topics/question-about-amd-radeon-7990.198993/
Relevancy 18.49%

For Christmas I got another mm case fan aerocool shark rpm and I tried mounting it at the top of the case to suck out hot air as I have intakes and exhaust already but I couldn t seem to get the right screws to screw it in at the top my case aerocool fan cooling Case question strike x gt came with long screws for the top of the case but they are too thin to screw into the fan So instead I mounted the new fan on the side door on the top fan slot by the CPU as an intake and today when I played a new game that I got for Christmas BF I noticed the CPU temps would get rather hot I am using the stock intel cooler bear that in mind I was getting a max temperature of about degrees C after a roughly Case fan cooling question hour gaming session Would I benefit from making the new fan an exhaust by the CPU or would I be better off or is there a secret way of mounting a fan up there at the top as an exhaust that I son t know about as I imagine that way would be the best way to do things Also my graphics card could handle BF at all max p with FPS Thanks EDIT - To clarify I have intakes at the front one rear exhaust and the new fan as an intake on the side door by the stock CPU cooler nbsp

A:Case fan cooling question

hopgop1 said:





For Christmas I got another 120mm case fan (aerocool shark 1500 rpm) and I tried mounting it at the top of the case to suck out hot air as I have 2 intakes and 1 exhaust already but I couldn't seem to get the right screws to screw it in at the top, my case (aerocool strike x gt) came with long screws for the top of the case but they are too thin to screw into the fan. So instead I mounted the new fan on the side door on the top fan slot by the CPU as an intake and today when I played a new game that I got for Christmas (BF3) I noticed the CPU temps would get rather hot (I am using the stock intel cooler, bear that in mind) I was getting a max temperature of about 80 degrees C after a roughly 2 hour gaming session. Would I benefit from making the new fan an exhaust by the CPU or would I be better off, or is there a secret way of mounting a fan up there at the top as an exhaust that I son't know about as I imagine that way would be the best way to do things. Also my graphics card could handle BF3 at all max 1080p with 60+ FPS. Thanks. EDIT - To clarify I have 2 intakes at the front, one rear exhaust and the new fan as an intake on the side door by the stock CPU cooler.Click to expand...

With stock coolers, the fan on the intel cooler is pulling the air through the heat sink off the CPU and into the case away from it. By putting a fan blowing air down on the CPU, you are pushing the air back onto your cpu thus keeping the hot air hovering around it.

I would suggest swapping to exhaust.
 

http://www.techspot.com/community/topics/case-fan-cooling-question.198885/
Relevancy 9.46%

Acer travelmate Model BY Operating system Windows XP wth servicepack Hi After being reinstalled windows xp the sound of my laptop has been disabled The icon of sound in the right bottom of the screen has been gone And now disabled of being my windows is Laptop after Sound xp reinstalling I got different sound errors sometimes when I go to - start all programs accessries entertainment volume control and then click I got the error that quot there is no active mixer device avaiable On control panel when I click on Sound is being disabled after reinstalling windows xp of my Laptop sound and audio devices I found all the options related to sound are being disabled I also checked out the harware section on MY Comuter the sounds drivers are there but something goes wrong with respect to that I have already downloaded audio vga and someother drivers from us acer com ac en us content drivers and installed them but the problem is still there that is the sound is disabled I would really appreciate on this forum if I can get the solution from someone with respect to that sound problem I am facing I can t want to open my laptop s harware because I cant do that BinNyen nbsp

A:Sound is being disabled after reinstalling windows xp of my Laptop

Do you see any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/sound-is-being-disabled-after-reinstalling-windows-xp-of-my-laptop.198314/
Relevancy 9.89%

I am finding this problem to be a bit of a puzzler I have pc s networked together and connected to the internet through a switch and Unable the browse internet 7 to Windows then to a BTrouter all connected via Ethernet cabling None will connect to any page using IE one Unable to browse the internet Windows 7 has google chrome that will open google do a search if Unable to browse the internet Windows 7 I type in a subject but if I try to open one of the found pages it won t open them if I type in a website address same problem If I go into windows Live mail it will send and receive mails suggesting to me that internet is connected I have ran scans with Combofix and Malwarebytes which found next to nothing and booted into safe mode but still no success I can access the software on the routers so that connection is fine Have rebooted router and also changed the router for a different make and still no success both routers seem to tell me that broadband is connected This was all working OK some days ago and then all stopped working Any suggestions would be gratefully received nbsp

A:Unable to browse the internet Windows 7

Let's try this; using an Admin user login, get the command prompt and then enter:

ipconfig /flushdns
net stop "dns client"
Quit any existing browser, restart a browser and try Google again.
If you can run like this (btw: it will be slower to resolve the url), then we need to investigate youretc\hosts file. If you still can't surf the net correctly, we need to dig deeper.
 

http://www.techspot.com/community/topics/unable-to-browse-the-internet-windows-7.198415/
Relevancy 18.92%

I have a Compaq dc5750 that would of had pc 5300 ram but it has none atm, but I have some pc 6400 will it work? I mean all the other specs are ok, but it's pc 6400. thx
 

A:Ram question

There is only one way to find out. That is to try it. If it does work it will not run at 6400 unless the motherboard supports that speed. If the motherboard only supports 5300, the memory modules will down clock to 5300.
 

http://www.techspot.com/community/topics/ram-question.198686/