HP sent a 16gb 2Rx4 PC$-2133P-Ra0-10 seperately with the new PC (HP Z240 SZh3). It came with 8gb RAM. I replaced the 8gb RAM with 16gb RAM but it wont boot. Blinking RED power light which turns to white blinking light. HELP!http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z240-cannot-boot-with-16gb-RAM/td-p/5621704
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
HP sent a 16gb 2Rx4 PC$-2133P-Ra0-10 seperately with the new PC (HP Z240 SZh3). It came with 8gb RAM. I replaced the 8gb RAM with 16gb RAM but it wont boot. Blinking RED power light which turns to white blinking light. HELP!http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/HP-Z240-cannot-boot-with-16gb-RAM/td-p/5621704
Have a new Z240 Workstation with a Samsung 950 Pro 256GB M.2 nVMe SSD.Windows 10 will install to the SSD from USB no problem but the machine fails to find the OS post install.The Samsung 950 Pro SSD does not show up in the UEFI section of the BIOS, but it does show up under Legacy devices.Secure Boot is not enabled. If I add a SATA HDD, Windows Boot Manager gets installed on the SATA device and the machine will then boot Windows 10 from SSD. How do I get the machine to boot from SSD without having to have a SATA HDD installed? I've updated the BIOS from 01.11 to 01.21 with no change in the above.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-wont-boot-from-M-2/td-p/5587319
Brand New HP Z240 Tower Workstation with HP Solid State Drive will not BOOTHP diagnosticsHard Drive SMART Check: WARNING (1: NOT AVAILABLE)Hard Drive Short DST Check: NOT AVAILABLE (1: NOT AVAILABLE)http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/No-Boot-Device-HP-Z240-Tower-Workstation/td-p/5592736
Issue: Whever the system is booted/rebooted after POST, while transfering control to OS, the system goes into a pause/halt (keyboard and mouse doesn't responds)Workaround: As soon as one of the monitors is turned off, seems control passes to Windows 7 ("Loading windows" on black screen shows up) and boots normally, now the monitor can be turned on and dual display works as usualAdditional info: While the system is paused, if the NUM/CAPS/SCROLL lock is pressed in a particular sequence (even though the lights actually don't respond), it looks like the key-press sequence gets stored in buffer. This is verfied once one of the monitor is turned off, the same keypress pattern lights up on the keyboardSetup: z240 with 2x23" monitor connected to Display-ports, HP smartcard keyboard and mouse connected to rear USB. BIOS version 1.11 (SP74759)Has anyone experianced similar issue or anyone has a fix for this?
Same here.New Z240 workstation with Xeon E3-1245 v5 and two monitors HP Z24n, both attached on the motherboard's DisplayPorts.OS: Windows 7 Enterprise x64 Sp1 with latest patches and drivers (including monitors' one), BIOS (01.27 Rev.A) I found two workarounds: power down and restart, or briefly attach another DVI monitor. I will try your trick to power off a monitor. P.S. Initially I had the same problem using two Samsung DVI monitors and HP DisplayPort->DVI adapters. I thought it was a problem with the signal conversion and changed monitors. Probably this post is an instance of the same problem:http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z-240-Video/m-p/546...http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z240-boot-issue-with-dual-monitor-setup/td-p/5531610
Inspiron z n z Laptop Authoritative confirmation of memory upgrade to GB GB gb There are various claims that z n z can be upgraded to GB unofficial or therotical based on CPU-i being Sandy bridge Here are the main issues on this subject that has left many customers scramble for answers and find themselves confused It is the interest of customers that Dell come out with an official statement quot confirming quot or quot denying quot if this is possible Yes at the time of sale 16 Authoritative 16GB, memory n411z (Laptop): 16gb of Inspiron upgrade 14z GB, to confirmation Dell stated that max permitted Inspiron 14z n411z (Laptop): Authoritative confirmation of memory upgrade to 16 GB, 16GB, 16gb was GB But now therotically Sandy Bridge CPU can support Gb and based on other users experiments it seems possible but no concrete firm proof available If it is possible Dell can always state that it will not support GB though it Dell has tested it as possible in their labs In the absence of a confirmation from Dell most memory vendors are not selling memory GB upgarde for Inspiron using their quot configurators quot There is another confusing twist to this problem created by the fact there is another Dell XPS model facing same problem But they newer CPU for which most vendors are selling the memory upgrade on their configurators For Dell most Inspiron 14z n411z (Laptop): Authoritative confirmation of memory upgrade to 16 GB, 16GB, 16gb users are now quot past their Warranty quot period There is Inspiron 14z n411z (Laptop): Authoritative confirmation of memory upgrade to 16 GB, 16GB, 16gb no liability in answering this question In the LARGER interest of customers Dell should clear this doubt For those users who have done this at their home or office can you please show us the quot steps quot and quot results quot Some users have claimed they have upgraded successfully to GB after updating their BIOS to current or latest version Can these early adopters post videos or steps on how they have done this Please Some have indicated they have faced problems but have not stated if the BIOS upgrade was done Also what has been your experience after running it for few months There are claims that GB upgrade has dramatically improved the life of z N z theoretically I would agreed it would Proof required Can the community or Dell please give us authoritative answers
HTML version, sorry did not realize the editor would post it as text
Inspiron 14z n411z (Laptop): Authoritative confirmation of memory upgrade to 16 GB, 16GB, 16gb
There are various claims that 14z/n411z can be upgraded to 16GB (unofficial or therotical based on CPU-i5 being Sandy bridge)
Here are the main issues on this subject that has left many customers scramble for answers and find themselves confused:
* It is the interest of customers that Dell come out with an official statement "confirming" or "denying" if this is possible
* Yes, at the time of sale Dell stated that max permitted was 8GB. But now therotically (Sandy Bridge CPU can support 16Gb) and based on other users experiments it seems possible, but no concrete/firm proof available.
* If it is possible, Dell can always state that it will not support 16GB, though it (Dell) has tested it as possible in their labs.
* In the absence of a confirmation from Dell, most memory vendors are not selling memory 16 GB upgarde for Inspiron using their "configurators".
* There is another confusing twist to this problem, created by the fact there is another Dell XPS model facing same problem. But they newer CPU, for which most vendors are selling the memory upgrade on their configurators.
* For Dell, most users are now "past their Warranty" period. There is no liability in answering this question. In the LARGER interest of customers Dell should clear this doubt.
For those users who have done this at their home or office, can you please show us the "steps" and "results":
* Some users have claimed they have upgraded successfully to 16GB after updating their BIOS to current or latest version
* Can these early adopters post videos or steps on how they have done this. Please.
* Some have indicated they have faced problems, but have not stated if the BIOS upgrade was done
* Also what has been your experience after running it for few months.
* There are claims that 16GB upgrade has dramatically improved the life of 14z N411z, theoretically I would agreed it would. Proof required.
Can the community or Dell, please give us authoritative answers
Hello I have a T workstation with an Xeon e - CPU and GB of RAM x GB After researching through the Technical specifications T3600 16GB with boot will not Ram than more I T3600 will not boot with more than 16GB Ram upgraded to an E - processor and purchased a GB Kit x GB of RAM nbsp I installed the CPU and I can get the machine to boot with GB ram - GB each in slots Dimm and Dimm nbsp However when I put RAM into either DIMM or DIMM the machine powers on for a few seconds then shuts down nbsp If I put RAM in all four DIMMs the machine powers on and the power light stays steady lit but does not BOOT According to the technical specifications manual the machine should work with up to GB of memory nbsp The spec says quot GB x GB DDR MHz quot nbsp I m assuming the is a misprint nbsp I purchased a GB kit of x GB DDR Rx CL v RDIMM ECC memory nbsp BTW nbsp This is also what is recommended on the Crucial memory scan page nbsp DDR PC - bull CL bull Dual Ranked bull x based bull Registered bull ECC bull DDR - bull V bull Meg x My first thought is the power supply nbsp However I checked the original configuration using the service tag and the original configuration power supply is W PS nbsp There is a RAID controller and a MB NVidia Quadro NVS card and only one GB SATA drive nbsp Hardly enough to overpower the power supply I tried installing two of the original DIMM s in banks and but got the same behavior I reset the BIOS to default settings and have searched for but have been unable to find anywhere in the BIOS to change memory timing or voltage settings Why does only GB work and does anyone know how I can get all four DIMM banks to work with GB DIMM s UPDATE When I install RAM in all four banks the machine doesn t shut off and the power light stays steady lit nbsp This happens no matter if I have all four of the new x RAM modules installed or the original x modules installed This leads me to suspect the problem may lie with the CPU as that is the only other new component However I ran a full diagnostic on the CPU and it passed with no issues To test for a possible power issue I removed the RAID controller but the above behavior does not change Also I have verified by part number that the W PS is installed and I did previously upgrade the BIOS to v A Thank you
Thank you for reaching out to Dell Community Forum.
Please try three memory slots at a time and check if the system boots.
Please click my DELL-username and send me a Private Message with the Dell Service Tag number and your email address.
Note: please don't mention the service tag or email id on the public forum as it contains your personal information
I have just built a new pc with the following (all new components 6/17/2011):
os: win7 64bit
mb: asus m5a88-v evo
hd: seagate 1.5tb 6gb/s
ram: g.skill ddr3 4gb each stick (3 installed)
I had a hard time trying to install windows until I disconnected the blueray dvd (sata) and pulled out 2 of the memory sticks. I've tried to have 16Gb of ram but windows doesn't boot if all 4 stick are installed. It works great with 3 sticks.
The bios version is still at the initial stage.
I suspect that as ASUS posts new bios updates, more memory will be supported and bugs will get fixed.
You may want to check and see if your ram is on the Qualified Vendors List.
ASUSTeK Computer Inc. - Motherboards- ASUS M5A88-V EVO
Other members should weigh in after looking at your health report.
Hi everyone- So I ve got a GA-Z XP-UD mbo intel i boot to Machine 16GB i RAM won't upgrade when k and have been using x gb of gskill mhz F - CL D- GBXL since august I got an additional x gb gb total now but my Machine won't boot when i upgrade to 16GB RAM computer refuses to boot at all when i put all sticks in Everything runs perfect with GB installed and will even boot with although it only uses gb of course it says right on the ram that timings should be - - - which is what my ram is set to in the bios its set to mhz with V also printed right on the ram I ve also tried the ram at lower speeds with no luck When I boot it up with gb it turns on for a second and before any screen even displays it powers off and cycles I have no idea what the problem is and gigabyte support has been useless Sorry if this is the wrong section but i suspect a faulty motherboard as i ve tested all the ram and both ram channels individually I also have GB of Patriot signature line RAM PSD G KH that has the exact same result Any suggestions nbsp
Have you thoroughly checked the motherboard specs for the correct memory?
Originally came with 8GB RAM - upgraded to 16GB with exact same timings as original RAM.
BIOS is up to the latest/greatest version.
Since upgrading boot time has been miserably slow. I've since done a complete reload of Windows 7 Ultimate 64 bit and installed at the latest drivers from the HP website - boot times are still extremely long.
Original hard drive was a 750GB 5400RPM drive (not a hybrid, not SSD), switching over to a 1TB 5400RPM drive made no difference.
Virtual memory is set to allow Windows to manage.
By the way, booting into Ubuntu takes no more than 15 seconds.
Any suggestions? 3+ minutes to boot into Windows excessive to say the least!
If you drop back to 8GB, does the problem go away? Not a fix, just a test to see what happens.http://www.sevenforums.com/performance-maintenance/286496-extremely-slow-boot-after-upgrade-16gb.html
I have a working won't RAM boot 64bit w 16GB Prem Home Win7 Window Home Premium bit PC working perfectly with x GB DDR RAM for GB of memory I Win7 Home Prem 64bit won't boot w 16GB RAM upgraded the memory to GB DDR by buying additional GB modules of the exact same memory same brand model number speed timing etc Corsairs Vengeance CMZ GX M A C but Windows now will not load with GB of RAM and it stops booting Win7 Home Prem 64bit won't boot w 16GB RAM after the quot Starting Windows quot Win7 Home Prem 64bit won't boot w 16GB RAM screen with the multicolor windows logo rolling flashing I have already checked that the new memory modules are good I can load Windows if I use x GB RAM of the new memory or x GB of the old memory and even if I mix one GB stick of the old memory and one GB stick of the new memory As long as I boot with GB Windows will boot and get to the desktop My computer will even work as a HackIntosh with all x GB memory sticks installed and OS X will load and work with GB of RAM My motherboard Gigabyte GA-Z M-D H rev has DDR memory slots and according to the manual it can support up to GB of RAM I also know that Windows Home Premium bit will support up to GB of RAM I verified that I have Windows Home Premium bit activated and validated as genuine Windows BIOS boots with x GB RAM and it shows all GB installed and working properly The BIOS setting for the memory is the stock speed MHZ I even tried MHz at stock volts and stock auto - - - timing After the POST it shows that GB is available because I am using MB as integrated video memory for the Intel HD integrated video quot card quot provided by my Intel i - K CPU running at stock MHz Everything goes well windows starts the color windows logo comes on the hard drive blinks as it is loading windows but then it stops and does not continue to load the desktop There are no error messages it does not seem like it is frozen as the color windows logo continues to roll flash The hard drive eventually stops loading and that is it It fails to boot to the desktop and just stops there with the color windows logo rotating flashing around the colors of the windows logo Is there some settings I need to set on Windows while I log in with GB of RAM to make windows recognize GB or boot with GB Is there a driver I need to install a windows update or fix I have applied all windows updates provided by the automatic windows update and even installed any missing updates as found by Belarck Advisor x I think I have done everything by the book but no go What else could I be missing I already updated the motherboard BIOS to the latest BIOS from Gigabyte BIOS F the latest before going to EUFI beta BIOS The only thing I can think of is that I did not get all x GB of RAM all at once from one pre-packaged x GB package I got x GB year ago and the same model from the same manufacturer x GB this year The RAM module markings all says the exact same things except that the year old ones say version and the new one say version Or is it possible that having all DDR slots full can cause some problem But since all the memory modules are all booting on the BIOS and working even when mixed as long as it is GB on Windows and t GB on OS X I don t think it is the physical memory or the motherboard I think it is something to do with Windows Home Premium bit I haven t got any further clue If you have any suggestions please let me know Anyone else able to run Windows Home Premium bit with GB of RAM nbsp
I would burn a boot CD from the latest Memtest to be sure.
It's easy enough to check.
.iso files are here: http://www.memtest.org
If that shows OK, I would call MS and ask about the issue.
Hi I have an Asus rog g750 jw. For a while now my pc has been booting up slow, 3-4mins from 1-2mins from 30secs. I have did so many test and removed so many programs and viruses that I am not completely sure what the source of the problem is. one thing I did do is disable some services in services.msc although I am not sure which ones caused it, so that may be an issue. I really don't want to have to fully reset my pc, but any help is sincerely apperciated. (minor lags on beginning, but no over cpu usage or memory usage)
I have also disabled drivers like the keyboard, mouse and some Nvedia drivers in device manager because There was a spill on the laptop and... As for the nvedia drivers I had to because they were Causing some latency when I used an external dac for audio (which is still there- causing freezing in the screen, atm I use the audio supplied)http://www.bleepingcomputer.com/forums/t/597750/boot-time-for-notebook-really-slow-3-4mins-16gb-i7-4700-proccesor/
I recently purchased Dell XPS 13 9350 i7 RAM 16GB 512SSD, 13.3″ QHD touch, Windows 10
On this morning, I started the PC, I saw on scree
"Boot Guard verified DXE that is fail.Press any button to shut down"
And then shut down, not woking Power off.
Can you understand what the problem is, and suggest a solution?
Thanks a lot!
Hi Team, We are trying to install win7 on Z240 but due to some issue the SSD does not gets detected we have also tried installing Win7 via CD/USB but still no luck can someone help me regarding this issue.
If secure boot is enabled in BIOS, try disabling it and enable legacy boot.Also in case you are using NVME SSD, then you may need to inject the corresponding driverhttp://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Z240/td-p/5529208
I have a brand new HP Z240. I have installed the SSD in the M2 slot on the board and updated the BIOS 1.27. The board or the BIOS will still not see the SSD. it is a Crucial 500GB SSD. Any help would be appreciated. Thanks.http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Z240-can-not-see-my-M2-SSD/td-p/5769871
I need to upgrade from a Z220 to a Z240 using the same drives and o/s and software. Will those drives run on the 240 without crashing? If not, what drivers would I have to supply to use a program like Acronis Snap Deploy (set to restore to different hardware)?http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z240-z220/td-p/5590254
Hi,I would like to know the MTBF of Z240 workstations.In one site I found MTBF as 2 million hours with SSD. Is it correct?http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/MTBF-z240/td-p/5744704
Hello We are going to be purchasing a lot of HP Z Tower Workstations from our supplier in the future and I have been given one to QA in our environment nbsp We currently use HP BCU to make available and enable the TPM on our current HP systems We are using version of HPBCU Today Workstation HP TPM PPI Z240 I have downloaded version of the HPBCU to begin creating a configuration file for the new Z workstations nbsp The problem I have is that the TPM PPI physical presence settings are nowhere to be found in the UEFI BIOS firmware user interface What we want to do is suppress the prompt that would allow users to deny HP Z240 Workstation TPM PPI modifications This is was possible in previous incarnations of HPBCU on different models of workstation in the form of the following setting nbsp Embedded Security Activation Policy nbsp nbsp F to Boot nbsp nbsp Allow user to reject nbsp nbsp No prompts nbsp Unfortunately this is not in the file created using on the Z and as I said nothing appears in the user interface I have checked under Security gt TPM Embedded Security but the only options I see there are TPM Device and TPM State nbsp Is it possible to configure the physical presence settings on this model of workstation using HPBCU If not then I will need to reccommend an appropriate alternative make HP Z240 Workstation TPM PPI model where it is possible nbsp We deploy scripts that run HPBCU through configmgr SCCM and can't have this prompt annoying our users and potentially allowing them to deny the change nbsp We also can't have technicians HP Z240 Workstation TPM PPI visit every Z to configure this manually Our I T estate is fairly large at computers so automatic management is crucial to us nbsp Any help would be massively appreciated nbsp Many ThanksC Solved View Solution
Updating the System BIOS/Firmware seemed to solve this issuehttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z240-Workstation-TPM-PPI/td-p/5597459
Dear Support Team,I want to procure HP Z240 workstation for one of my project. The online datasheet shows that it comes up with only Windows 7 or Windows 10. But my system requirement is with Windows 8.1. Can HP Z240 haedware allows me to use it with Windows 8.1, if I purchase windows seperatley.RegardsWaqas Khalidhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Windows-8-1-for-HP-Z240/td-p/5767910
Hello, i just bought an hp z240 workstation (tower format).I'm trying to configure a transcend m.2 30GB drive. After installing it on the dedicate m.2 slot on the motherboard i can't see it in the bios and even in windows 7.the first drive is connected on sata0 (original 1tb hdd with win 7 installed on it)On bios settings the m.2 slot is enabled. any suggestion? Thank youhttp://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/m-2-ssd-on-hp-z240-tower/td-p/5639374
Bios ver. N51 1.27 Does anyone know where the option is to turn on Num Lock for the HP Z240? I have looked throguh the service manual and there was no listing for turning on num lock like other models.Example: the z210 Bios does offer this. z240 https://cdn.cnetcontent.com/87/f7/87f7c232-7b8b-4ce0-b452-5de5da0d9e9b.pdfz210 http://h20566.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02787107 Note: I am not interested in setting the forInitialKeyboardIndicators option in the Windows registy. I'm looking for an option similar to was is shown here. http://support.hp.com/doc-images/512/c02683746.jpghttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-Num-lock/td-p/5738846
Hello, I am working on installing windows 7 enterprise 64, on a z240 SFF. I am missing the USB drivers for it. I have the driver disk that came with it and I have installed every driver that is on there, along with going to HP support software and drivers web link and downloading everyone from there. There has not been one driver that has solved this problem, so I was looking for some sort of help on finidning one.l I tried a few other drivers for different model of towers but no luck. please help
Hi: Please post the hardware ID for the USB controller that needs the driver. To find the hardware ID, go to the device manager and click on the device needing the driver. Then click on the Details tab at the top of the device window. Now you will see a Property drop down list, and it will be set to Device Description. Drop down on that list, and select the 2nd item (Hardware ID's). Post the top string of characters that you see in the window.http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/z240-sff-USB-driver-missing/td-p/5746056
I am trying to find out why I am blocked from install WIndows 7 Pro 32-bit. Please advise.http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Z240-Stopped-from-installing-WIn-7-32-bit/td-p/5672460
I have a z with a i - CPU on my desk that refuses to recognize the attached monitor properly nbsp In the Xorg log file there is no mention of EDID data nbsp The result is that the HD display connected is set to x rather than x nbsp I'm running Debian and have updated the system BIOS to the latest N EDID Linux and z240, Ver nbsp I've also built the latest driver available from Intel for linux nbsp nbsp nbsp nbsp nbsp nbsp z240, Linux and EDID nbsp nbsp LoadModule intel nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Loading usr lib xorg modules drivers intel drv so nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Module intel vendor X Org Foundation nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp compiled for module version nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Module class X Org Video Driver nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp ABI class X Org Video Driver version nbsp Using an old PCIe x video card I have let me connect all of the ports on the monitors HDMI DVI and VGA and Debian correctly set the resolution each time and Xorg log showed all of the expected EDID data nbsp A different z system here is working fine using the onboard video nbsp Since I need to have up to RAID adapters in the system at once I can't just add a different video card nbsp I have not tried Windows to see if it works there though I am going to try to do that on Friday nbsp Is there a video BIOS update that might fix this problem nbsp or is the hardware broken nbsp thanksedc
I would guess you would have better driver support through windows vs linux for drivers.http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/z240-Linux-and-EDID/td-p/5697112
Hi, I'm wanting to install 2 x 3.5" HDDs in my new Z240 SFF Workstation. There is a bay that already came with an insert and one of the new drives slots into that just fine. However it looks like some sort of insert/caddy is needed for the "External/internal shared 3.5" bay", as it is too big for the drive itselt to slot in. It looks like this bay is sized for some sort of optical disk. I've called HP and their spare parts people here in Australia, but no one can find the part needed. Can some one please help?http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-SFF-caddy-insert-for-3-5-quot-HDD-in/td-p/5778715
nbsp HP Z Tower WorkstationProduct number L T AVTo update the Firmware I was provided this link by customer support http h www hp com hpsc swd public detail sp ts oid amp swItemId wk amp swEnvOid Using the link I was able Updating Firmware for Z240 to download and run sp exe nbsp Then Updating Firmware for Z240 a set of instructions appear as follows nbsp Another FWUpdLcl exe utility in the ME Flash Local-Win directory is designed to update the ME firmware within a -bit or -bit Windows environment from the Run box or a command prompt The ME can be updated by executing the following command FWUpdLcl exe -f BIN -generic Alternatively when running a -bit Windows environment use the command FWUpdLcl exe -f BIN nbsp nbsp -generic The ME Flash folder contains the binary update image to be used with the utility nbsp The update binary image and the Local-Win folder contents can be copied to any storage volume available within the Windows operating system nbsp nbsp Since I am using -bit Windows I assume I need to run the command nbsp FWUpdLcl exe -f BIN nbsp nbsp -generic nbsp My question is how do I complete this command i e how do I tell it which folder to look in to find the files nbsp Much thanks for any guidance nbsp nbsp
When you run HP service packs, they will expand and place their contents under an own directory within C:\swsetup.Specifically in your case, if you run sp74202.exe, you should see a new directory C:\swsetup\SP74202 has been created with the contents of the service pack within. Alternatively you can use 7-zip to peek inside the service pack exe without running it since the exe is a self extracting zip file that runs the installer once decompressed In any case, a newer ME update exists here but i'd first apply the latest system firmware update available here. When looking at the HP service pack links above, it's good practice to selectively click each "Description", "Enhancements", "Installation Instructions" "Release Notes" "Fixes" and "Revision History" tabs and read the information (some of it is repetative but you'll soon learn where to focus your attension). The contents of these tabs contain important and relevant information on what has been improved, fixed, which system it's for, how to install the update, etc. And if a previously installed SP is not listed in the "revision history" tab, that release may have been pulled by HP due to some fauly behaviour or other issue! Pay particular attension to the prerequisits as in some instances firmware updates have to be stepped (that is you can't always simply apply the latest). And if you read such boaring stuff, the system firmware (BIOS) Installation Instructions tab would have given you a clue where the sp files are expanded to Have you tried simply enter the command (as specified) via a command prompt window but changing directories to where the FWUpdLcl.exe file is located? Just keep in mind that sp74202 is the initial ME firmware release so nothing sould update So best to apply the latest system firmware (BIOS), then the ME firmware, then maybe the latest ME software (under chipset drivers). Best to bookmark this page which lists all the downloads for your z240 Windows 10 64bit tower system so check it out periodically.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Updating-Firmware-for-Z240/td-p/5575077
My system came with a Nvidia PCIe card. I would like to remove this card and use the integrated graphics. Whenever I remove the PCIe the system will just beep, and the integrated wouldn't work. I went in the bios but cannot find anything to enable the integrated. Thankshttp://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Z240-Integrted-graphics/td-p/5628346
Hello, I have some problem to open a ticket in warranty for an HP Z240. I'm registered on HP Support and also HP Enterprise Support, but when I try to open a ticket after the serial number check the site platform give me an error: this is not the right site for this serial number. I get this error on HP Support and also HP Enterprise support. What is the procedure to open a warranty ticket for this workstation?????If I call the telephone support number is always busy......it is crazy Thanks,Alessandrohttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Warranty-HP-workstation-Z240/td-p/5840120
I am trying to setup my new HP Z240 workstation, but cannot get the graphics card to operate at any resolution above 1024 X 768. The graphics card is an NVIDIA QUADRO K620. It is connected to the monitor with a DVI-D Dual link cable. The monitor is an HP w2408. The monitor has two inputs (DVI and VGA). I have the VGA input connected to another HP computer with a NVIDIA GeForce GT 610 card (this computer/card/monitor displays at 1920 x1200). When I checked the adapter modes (using the list modes option), the best mode listed is 1024 x 768. The NVIDIA spec sheet lists the max resolution with DVI-I as 2560 x 1600 or 1920 x 1200. What can I do to get the max resolution from my monitor (1920 x 1200)?
Update. Problem solved. When I realized that the monitor in DVI mode was not being recognized as PNP, it pointed to the monitor as the problem. Installed new monitor, everythng works as it should. Evidently the VGA input to the old monitor functioned properly while the DVI portion was defective (card or cable connection). Dave6666http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Graphics-resolution-on-Z240/td-p/5601923
Hello, does the HP Z240 and Z230 have the Same Power Suplly?http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z230-Z240-Power-Supply/td-p/5738621
When I download graphics card driver 15.20.1045 (sp73511.exe) from the HP site and install this, the properties display 15.200.1045.So I'm now not sure if the corect driver is installed, because I'm still getting graphics card errors. Our software supplier PTC recommends the certified 15.20.1045-version so how do I get this right?http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Graphics-Card-driver-Z240/td-p/5847833
Hello, My company recently purchased some Z240 SFF workstations and put in aftermarket multi-media card readers in the 3.5" slot. The card reader uses the internal USB 3.0 header, so I had to unplug the USB 3.0 cable for the for the front usb ports in order to get it to work. The media card reader works just fine in Windows, however, I get a POST error message on startup: "Cable detection Error 41A- Front USB2 Not Connected. Front USB cable has been detached or unseatted from the motherboard. Press Enter to continue." Is there anyway to disable POST messages? I can't seem to find anything in the UEFI/BIOS to do this.
One of the HP engineers who has been very helpful to us here has recently posted on a related question, and he has access to the schematics and the internal design details of these workstations. His post is on this thread, HERE : http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z420-USB3-0-Head... Dan tells how to jumper the header to make it believe the cable is still connected, and it would not matter whether you jumpered at the motherboard end or the far plug end, as long as you got the correct pins/plug holes jumpered. Note his caution.... that seems to suggest that the pins on the motherboard are not as stout as the ones we are used to seeing. A proper sized insulated wire jumper with a short segment of wire exposed at each end can be used as a jumper at the far plug end of a cable, rather than the little plastic jumpers we use at the motherboard pin end of thins. If you carefully figure out the wire colors this should work. The wiring of such headers/cables within a HP workstation family are usually the same, and things can stay the same from one generation to another, in my experience.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-POST-Message-disable/td-p/5761989
Greetings nbsp We've purchased Dells for years but recently started (Graphics) 3.3 Beep Z240 SFF Code giving HP a look The first unit I received just stopped working during deployment testing and gives me long beeps red LED with short beeps white LED According to the manual this translates to The embedded controller has timed out waiting for BIOS to return from nbsp graphics initialization I couldn't Z240 SFF Beep Code 3.3 (Graphics) find any specific troubleshooting steps for this error so I did the following based on the testing I was doing nbsp - Cleared CMOSThe system wouldn't boot after applying BIOS settings using the HP BIOS Configuration Utility so maybe something went wrong there That said I applied settings with this tool multiple times before on the same system without issue nbsp but thought it was worth a start Here's my config file nbsp BIOSConfig Legacy Boot Options Disable Enable Legacy Boot Order HDD USB CDROM SATA HDD SATA NETWORK EMBEDDED UEFI Boot Options Disable Enable Configure Legacy Support and Secure Boot Legacy Support Enable and Secure Boot Disable Legacy Support Disable and Secure Boot Enable Legacy Support Disable and Secure Boot Disable- Swapped video cards Nvidia Quado K with a known good card We bought two units for testing so I had an identical system to swap from - Swapped memory - Reseated all cables nbsp Any ideas on what else I should try before sending it backhttp://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Z240-SFF-Beep-Code-3-3-Graphics/td-p/5716527
HiI have bought a z240 tower which runs really well with win 7 pro. Recently, I wanted to add an SATA extension card, but without any success. I am looking for a simple SATA controller without RAID functionality (which unnecessary slows down the boot procedure). Unfortunately, HP does not offer any SATA boards as accessories - Is there any recommendation for such a card from your side? I've bought a LogiLink PC0059A card, unfortunately, the system does no longer startup when connecting drives to it. The hp BIOS screen appears as usual, then the card shows the attached drives, after that the hp bios screen appears again and reamains without any reaction (reboot required). Thanks for any hints Tomhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z240-add-SATA-card-no-working/td-p/5725275
Hello Does anyone know how to enable legacy support on Z240 Workstation? Under "secure boot configuration" in BIOS I choose "Legacy Support enable and Secure boot disable" but I save and reboot, it reverses back to "Legacy Support disable and Secure Boot Enable" Any suggestion please? Many thankshttp://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/how-to-enable-Legacy-Support-on-Z240-Workstation/td-p/5678692
Hi, I had a look inside and the Z Turbo drive appears to be connected to the motherboard (location 23 on the motherboard map in the manual) and not using a SATA port or any of the four main PCIe3 slots. Only one of the PCIe3 slots is being used and that is for the NVIDIA graphics card, and only one of the SATA ports is being used and that is for the Slim BluRay drive (connected to SATA3). That means there are 3 x SATA ports available, and 2 x 3.5" and 1 x 2.5" bays available, by the looks of it. My question is, is it possible to put 3 x HDD/SSD drives in it, i.e. 2 x 3.5" and 1 x 2.5"?
@jeffparker? Yes I believe you can add them. Check the quickspecs below:http://h20195.www2.hp.com/v2/GetPDF.aspx/c04762288.pdf The following are supported.500GB SATA 7200 rpm 6Gb/s 3.5" HDD LQ036AA1TB SATA 7200 rpm 6Gb/s 3.5" HDD - LQ037AA2TB SATA 7200 rpm 6Gb/s 3.5" HDD - QB576AA3TB SATA 7200 rpm 6Gb/s 3.5" HDD - QF298AA500GB SATA 7.2K SED SFF HDD1TB SATA 7200 rpm 8GB 3.5" SSHD (hybrid) - M7S54AA And the following SSD'sA3D25AA 128 Gb sata 3A3D26AA 256 GB sata3D8F30AA 512Gb Sata3F3C96AA 1Tb Sata3G7U67AA 256 Gb Sata3 SED OPALT3U07AA 240 Gb Ent class 2T3U08AA 480 Gb Ent class 2http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Adding-drives-to-HP-Z240-SFF-with-a-Z-Turbo-drive/td-p/5710925
Hi. I am trying to run the intel onboard graphics and an nvidia quaddro on the same machine simultaneously. HP says it is possible to do so but I cannot find the option in the BIOS to enable the onboard graphics as a primary driver. Right now, the onboard graphics cards becomes automatically disabled as soon as I plug the Nvidia in. Thanks for your helphttp://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-Z240-Running-multiple-graphics-cards/td-p/5854467
I am trying to install Windows 7 on a HP Z240 SFF workstation but when I boot from the Windows 7 USB media, it does not show the HDD even though it is connected. it would be great if someone could help me out with this issue. Thanks in advance.
Hello matt_william, If you are using a retail version of Windows 7 Operating System. You may have to install the Intel Rapid Storage Technology driver while installing the OS. On the HDD partition windows, you will get LOAD DRIVER option, you have to install Intel Rapid Storage Technology driver. Please find below link to download Intel Rapid Storage Technology driver. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8323799&swItemId=wk_156996_1&swEnvOid=405... NOTE: THIS ACTIVITY NEED TO BE PERFORMED ON ANOTHER UNIT. TO USE THE INTEL RAPID STORAGE TECHNOLOGY DRIVER DURING A NEW OPERATING SYSTEM INSTALLATION: 1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved). 2. Double-click the downloaded file and follow the on-screen instructions. 3. Navigate to C:\SWSETUP\SP73487 and unzip "f6flpy-x64.zip" to a USB key for a 64-bit installation. 4. Use the newly created driver installation media during operating system setup to install the drivers. Once you copy the driver on another USB media, connect it with unit on which you are trying to install OS. Click on Load Driver and navigate to USB and install the driver. Once the installation is complete, You will be able to access HDD and will be able to install OS. I hope that answers your question. I am an HP employee, the opinions expressed here are my personal opinions, not of HP. Make it easier for other people to find solutions, by marking my answer ?Accept as Solution? if it solves your problem. ***Click on "Thumbs up" button to the left side of my post to acknowledge the post ***http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Unable-to-Install-windows-7-on-HP-Z240-SFF-Workstation/td-p/5648294
I just got a HP Z240 Tower with a 400W power supply, 32 GB of RAM and 512 GB M.2 SSD. Is the GeForce GTX 970 Graphics card compatible? My PCIe v3 x16 slot is available.
Greetings, The 400 power supply could be an issue. A stock GTX 970 lists a recommended 500 watt power supply. You have to verify the 10.1 inch to 10.5 inch card will fit in your chassis. You should have the required UEFI BIOS if the system is brand new and you have a PCIe x16 3.0 slot available on the system board. Cheers!http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-Z240-Tower-Compatible-with-GeForce-GTX970/td-p/5676932
Hello ;I can not install the operating system. I got the warning:the bios in this system is not fully acpi compliant.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z240-tower-workstation-Windows-XP-x64-install/td-p/5637922
Hello Does anyone know how to enable legacy support on Z240 Workstation? Under "secure boot configuration" in BIOS I choose "Legacy Support enable and Secure boot disable" but I save and reboot, it reverses back to "Legacy Support disable and Secure Boot Enable" Any suggestion please? Many thankshttp://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/how-to-enable-Legacy-Support-on-Z240-Workstation/td-p/5678692
Dear all, I am going to buy a HP Z240 tower workstation. Do anyone know that the decibel of this computer? Is it louder? Do you know which HP workstation works quietly? Many thanks! Celiahttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Does-HP-Z240-Tower-Workstation-work-noisily/td-p/5854515
This should be easy but I can't find the PCI Serial Port Driver for HP Z240 VEN_8086 DEV_A13D. I think that's the AMT driver for this puppy.... I think its called sunrisepoint or skylake chipset? Things that make you go hmmmmm
Hi: You need this driver...the AMT SOL driver is included. This package contains the latest Intel Management Engine Software for the supported Workstation models and operating systems, as well as utilities for updating and checking status. ftp://ftp.hp.com/pub/softpaq/sp76501-77000/sp76975.exehttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/PCI-Serial-Port-Driver-for-HP-Z240-VEN-8086-DEV-A13D/td-p/5745582
Hello. I am currently working on getting a fresh installation of Windows 7 on our HP Z240's in order to create our standard business image. I was able to install Windows 7 Enterprise but am having one issue. Whenever the workstation goes into sleep mode it will do a hard shutdown. I've installed the latest drivers found here for the chipset, graphics, NIC and sound. The issue still occurs. I've done the same on three different workstations and have experienced the same issue between all three. The OEM Windows 7 installation has no issues on the same exact workstation. Can anyone assist me with this? Thank you!http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z240-with-Windows-7-Hard-shutdown-before-sleep-mode/td-p/5673196
Hi there nbsp My work machine is a HP Z SFF PC Last month the machine began randomly hanging and displaying blue screen errors There isn't much in the way of discernible patterns but it tends Z240 SFF blue crashes and HP screens random hangs, to happen when the machine is in use rather than idling and I can consistently reproduce it when using the Prime stress testing utility When I set it to maximise CPU heat as soon HP Z240 SFF random hangs, blue screens and crashes as I stop the test the machine blue screens indicating a cooling issue The machine's fan is very quiet although on occasion it gets very loud after a restart and then quietens down I would expect the fan to get louder as the CPU gets hotter during the HP Z240 SFF random hangs, blue screens and crashes stress test but this doesn't happen so I wonder if the fan is malfunctioning and if this is a known issue with these machines or if there is any possible resolution nbsp Please see below for the output of BlueScreeView which displays the error codes produced by recent blue screen errors nbsp nbsphttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z240-SFF-random-hangs-blue-screens-and-crashes/td-p/5658407
Hi, I?d like to install a media card reader (e.g. HP 468494-005) into the shared internal/external 3.5" drive bay of my HP Z240 SFF workstation but it doesn't fit. It probably needs a carrier of some kind, because the casing is just a bit too wide and there are no holes for the standard screws. I couldn't find any instructions on the HP website. Any help would be greatly appreciated!http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Z240-SFF-installing-a-card-reader-into-the-shared-internal/td-p/5739086
It appears that newly shipping Z240 Tower workstations DO NOT have an internal USB header anymore? The System Board Overview graphic in the Maintenance & Service Guide (Oct 2015) shows #7 as a USB 2.0 internal header. However, the location where the header should be on the system board is actually a 1x6 pin header (P150) listed as "MEDIA". The other USB 2.0 Header, #5, is taken up as the front USB cable. So is there an updated manual that shows what is actually on the system board? The Z240 Tower QuickSpec is dated March 2016, so I'm hoping there is a newer manual out there somewhere. Any idea what the P150 MEDIA header is for? Is this for the old media card readers? I have the optional SD card reader, but that is attached to #8 which is the internal USB 3.0 header. Any way to attach deveices that need an internal USB 2.0 header?http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-internal-usb-header-and-updated-Maintenance-amp-Service/td-p/5598284
Hi all, I got a Z240 SFF workstation with a 512G HP Z Turbo Drive G2 intalled on M.2 slot as a boot drive. I recently add a 1.2T Intel 750 PCIe SSD on PCIe slot 4 for additional storage. However after the Intel 750 SSD was intalled, the computer began to shutdown automaticly after couple of minutes running. The issue will be fixed after remove the Intel 750 SSD. The system is running 64bit Win10, with Samsung NVMe Driver. The Intel 750 SSD can also be read and write when installed and Intel Data Center Tool shows that the SSD is healthy. I think the auto shutdown issue is related to overheating on 750 SSD. I am wondering if the motherboard of Z240 SFF is compatible with Intel 750 SSD. Does anyone have Intel 750 PCIe SSD installed on their Z240 SFF or any other Z Workstation? Thanks! NOS_ATXhttp://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Auto-shutdown-issue-of-Z240-SFF-workstation-when-Intel-750/td-p/5696977
Guys, I just erceived a new z240 workstation and cannot find where to disable DEP in the BIOS. we have 3 z230's and I found it in that bios. Can anyone help. Have legacy software that will not install correctly with DEP enabled. Thankshttp://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Z240-DEP-Data-execution-Prevention-disable-Can-t-find-in/td-p/5775621
When running an SCCM 2012 R2 task sequence to install Windows 10 on a Z240, the network driver is working in Windows PE during the download and apply Windows image. I'm using Auto Apply Drivers step and after it's completed, the computer restarts into the Windows 10 OS, tries to set up the devices and then the task sequence fails because there is no network driver detected that it can use. I've tried to import multiple types of network drivers from both HP and Intel with no success. I've tried to specifically apply the Z240 driver package instead of using Auto Apply Drivers with no success. I've also tried to install a Windows 8.1 image instead and it still fails at the same point. I'm confused because it works fine in PE, but not after restarting and booting into the Windows OS. Any help or suggestions would be appreciated.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Missing-Z240-Network-Driver-after-booting-to-Windows-in-SCCM/td-p/5600498
I have upgraded from Win 7 to Win 10 and tried everything mentioned in this thread, but cannot remove the yellow flag. Code 10 error in the device manager. registry entries are: any other suggestions? Chris
Hi: Do you have the same issue with the same hardware ID? If not, please post the hardware ID for the HDA device that needs the driver. I only see W10 graphics driver for the nvidia graphics adapter.http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/High-Definition-Audio-Device-has-Yellow-Flag-on-HP-z240/td-p/5684915
I can't get new Z workstation to boot into WinPE on Windows x Windows x and Windows x with only and NVMe drive installed to the M slot on the MB I've tried plain OEM Media and WDS with WinPE with different drivers added to the boot wim file all no luck nbsp It seems there must be some sort of bug relating to the Samsung nbsp pro nbsp M nbsp NVMe GB drive I'm using When I leave this as the only drive CDRW the computer always hangs as soon as WinPE starts If I leave the Samsung NVMe drive installed and add another SATA drive such as a Samsung Pro SSD it behaves fine- WinPE then loads and I can see both drives nbsp I was able to install Windows nbsp on the NVMe drive and booted into Win as long as the SATA drive was present As soon as I removed the nbsp SATA drive nbsp and it starts loading windows it immediately hangs again nbsp It shouldn't be NVMe driver support as Windows WinPE has native windows when or booting Samsung... hangs Workstation WinPE Z240 NVMe support and has the same problem so it must be something else I suspect it's either something I have to turn off in the BIOS or some other BIOS UEFI bug nbsp Has anyone seen this before nbsp Thanks nbsp Edit Z has latest BIOShttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-Workstation-hangs-booting-windows-or-WinPE-when-Samsung/td-p/5574579
I felt a bit flush recently and bought 4 x 4gb ddr2 stick to upgrade my main PC. Just run a few things and its obviously better than my previous 4GB total however I noticed, for example, divx conversion only used 56MB of memory and there is still so much free.
Is this much memory a waste? If so I'll use half of it to beef up my WHS.
Should I fresh install W7?
Proc: Intel Core 2 E8400
Mobo: Intel DG45ID (16GB max ram).
Yes it is a waste. Really anything over 4gb is a waste for an average user. For a high power user 6-8gb is optimal. Most apps do not need that much memory to run efficiently and with how efficient Operating Systems are with memory management these days, it is overkill to have more than needed. I know I like to have the fastest and the best too, but I would suggest, like you said, put half of it in your WHS although WHS only needs about 512Mb to run and 1-2Gb is optimal. Really it is totally up to you. If you want bragging rights leave the 16 in if not split it up. You could even put 4gb in WHS and 12 in your PC.http://www.sevenforums.com/hardware-devices/89684-16gb-ram.html
I bought a new laptop and it has 1 stick of 4GB ddr3 1600.
I use my laptop for:
- Video editing (premiere pro, vegas, after effects)
- Games (GTA 4/5, Sims)
- Photo editing
- Music editing
I am just wondering if I should get another stick of 4Gb 1600 or buy 2 8GB 1600?
Is 16GB worth it? Or is it overkill? Because it's quite expensive.
If I buy 2 8GBs I will have a 4GB lying around unused.
Please give suggestions!
Also is 16GB 1333 or 8GB 1600 better? Which is faster?
Hi. I just bought a second-hand computer today. Anyway I was under the impression it had 16gb of ram. I found out in the control panel it says the computer has 8gb of ram.
Here's the ad: http://www.gumtree.com.au/s-ad/paddington/desktops/full-spec-gaming-computer/1012071080
"2 x 8gb G.SkillDDR3-2133 RAM"
Am I wrong in assuming that means 16 total? Or does that somehow mean 8gb total?
I wanna know to decide whether i have a right to complain/ return it, or whether there was no false advertising on his part.
i think this isn't a hardware problem , what is there to do about it ? i know the ram definitely works with win7/8 .............
Go through the suggestions here:http://blogs.technet.com/b/askperf/...Always pop back and let us know the outcome - thankshttp://www.computing.net/answers/windows-10/win-10-says-i-have-25gb-of-ram-when-i-have-16gb-installed/393.html
Currently I have 8GB of RAM on my T410s (i5-520m) but it's already not enough. Well, I know that officially only up to 8GB is supported for this model, but anyway - is it possible to have 16GB (2x8GB sticks) working with this config?
I haven't personally tested it but I believe the answer is yes.https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T410s-with-16GB-of-RAM/td-p/630667
im running Windows 7 Enterprise 64bit. Why do i only see 8Gb as opposed to 16Gb ?
My motherboard will run up to 16Gb. I have 4 x 4Gb sticks.
How much memory do you see in your BIOS?http://www.sevenforums.com/general-discussion/118118-windows-7-16gb-ram.html
Ok, getting a new computer which has 16GB of Ram. How can I use this wisely? Someone mentioned a RAM DISK and you agree, how do you create a RAM DISK? Thanks.
If you are using Windows 7 you don't need to do anything. Let Windows 7 take care of all that Ram, it will do a fine job.http://www.sevenforums.com/general-discussion/154311-new-i7-computer-16gb-ram.html
I have an E6410 latitude with 16GB (2x8GB) ram installed. On latest BIOS firmware (A11).
Linux is rock solid...however, booting my Windows partition results in a blank, white screen right after the Win 7 splash screen starts to display...then it reboots.
Anyone able to boot/run Win 7 with 16GB ram?
I can confirm that E6410 with i7-620M version of CPU will NOT WORK with 16GB of RAM (2x8GB or 1x16GB)
and will not run with 64Bit operating system installed.
Sham but it's still runs extremely well with 8GB + 500GB SSD.
Go to this thread for more information so much ram NOTE I dont have the issue right now with the gb ram usage when i ran the dds thing Quote DDS Ver - - - NTFS AMD Internet Explorer BrowserJavaVersion Run by Mario at on - - Microsoft Windows Home GMT - AV Windows Defender Disabled Updated D DDC A- F- fae- E -DA C ACF AV AVG AntiVirus Free Edition Enabled Updated D RAM 15.9/16gb goes usage up to F- AD- C -C - EE F SP Windows Defender Disabled Updated D DDC A- F- fae- E -DA C ACF SP AVG AntiVirus RAM usage goes up to 15.9/16gb Free Edition Enabled Updated F D B- - CC-F - BEAE Running Processes c PROGRA AVG AVG avgrsa exe C Program Files x AVG AVG avgcsrva exe C WINDOWS system svchost exe -k DcomLaunch C WINDOWS system svchost exe -k RPCSS C WINDOWS system svchost exe -k netsvcs C WINDOWS system svchost exe -k LocalSystemNetworkRestricted C WINDOWS system dwm exe C WINDOWS system nvvsvc exe C Program Files x NVIDIA Corporation RAM usage goes up to 15.9/16gb D Vision nvSCPAPISvr exe C WINDOWS system svchost exe -k LocalService C WINDOWS System svchost exe -k LocalServiceNetworkRestricted C WINDOWS system svchost exe -k LocalServiceAndNoImpersonation C Program Files NVIDIA Corporation Display nvxdsync exe C WINDOWS system nvvsvc exe C WINDOWS System svchost exe -k NetworkService C WINDOWS System spoolsv exe C WINDOWS system svchost exe -k LocalServiceNoNetwork C WINDOWS system WLANExt exe C WINDOWS System svchost exe -k utcsvc C Program Files x Hi-Rez Studios HiPatchService exe C Program Files NVIDIA Corporation GeForce Experience Service GfExperienceService exe C Program Files x AVG AVG avgidsagent exe C Program Files x AVG AVG avgwdsvc exe C Program Files x NVIDIA Corporation NetService NvNetworkService exe C Program Files NVIDIA Corporation NvStreamSrv NvStreamService exe C Windows runSW exe C WINDOWS SysWOW PnkBstrA exe C Program Files Qualcomm Atheros Network Manager KillerService exe C WINDOWS system svchost exe -k appmodel C WINDOWS system svchost exe -k imgsvc C Program Files x REALTEK REALTEK USB Wireless LAN Driver WPSService exe C WINDOWS system dashost exe C Program Files x TeamViewer TeamViewer Service exe C Program Files x AVG AVG avgnsa exe C Program Files x AVG AVG avgemca exe C Program Files NVIDIA Corporation NvStreamSrv NvStreamNetworkService exe C WINDOWS system svchost exe -k NetworkServiceNetworkRestricted C Windows SwUSB exe svchost exe C WINDOWS system sihost exe C Windows SystemApps Microsoft Windows Cortana cw n h txyewy RemindersServer exe C Windows System RuntimeBroker exe C WINDOWS system SearchIndexer exe C WINDOWS system taskhostw exe C Program Files NVIDIA Corporation NvStreamSrv NvStreamUserAgent exe C WINDOWS Explorer EXE C WINDOWS System svchost exe -k UnistackSvcGroup C Windows SystemApps ShellExperienceHost cw n h txyewy ShellExperienceHost exe C Program Files x NVIDIA Corporation Update Core NvBackend exe C Windows SystemApps Microsoft Windows Cortana cw n h txyewy SearchUI exe C Program Files NVIDIA Corporation Display nvtray exe C WINDOWS system SettingSyncHost exe C Program Files Microsoft Xbox Accessories XBoxStat exe C Program Files x Steam Steam exe C Program Files x Skype Phone Skype exe C Program Files x Opera opera exe C Program Files x Opera opera crashreporter exe C Program Files x Opera opera exe C Program Files x Opera opera exe C Program Files x Opera opera exe C Program Files x Steam bin steamwebhelper exe C Program Files x Common Files Steam SteamService exe C Program Files x Opera opera exe C Program Files x AVG AVG avgui exe C WINDOWS system fontdrvhost exe C WINDOWS SysWOW ctfmon exe C Program Files x Common Files Java Java Update jusched exe C Program Files x Intel Intel R Management Engine Components DAL jhi service exe C Program Files x Intel Intel R Management Engine Components LMS LMS exe C WINDOWS system ApplicationFrameHost exe C Program Files x Opera opera exe C Program Files x Opera opera exe C WINDOWS system taskhostw exe C Program Files x Opera opera exe C Program ... Read more
Hi Eject. I'm not convinced this issue is malware related, but let's take a look with a couple other tools.
Let's take a more detailed look at what's running on the machine.
Please download Farbar Recovery Scan Tool (FRST) and save it to your desktop.
* For 64-bit (x64) editions of Windows:http://download.bleepingcomputer.com/farbar/FRST64.exe
# Double-click on FRST to run it.
# When the tool opens click Yes to disclaimer.
# Leave all settings as they are.
# Press the Scan button.
# When the scan is done, it will save the reports to the same location as ?FRST? (if you had saved ?FRST? on your desktop, then the reports will be saved on the desktop). Please attach FRST.txt to your reply.
# The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.
I hav a 16G TDK pen drive that works on any other PC. I use it as an install stick with Win8 on it. It is very intermittent on my PC(Win 8 64bit). I know all the USB ports are working as I have tested them, check dev manager etc. Sometimes Ill put it in it shows (rare). I am at a loss
thanks in adavance
When you insert it does windows say found new hardware, installing drivers, install sucessful?
Have you rebooted the system? (some people never turn off their PC thats why I ask)
does disk management see it?
I'm trying to use 16GB of RAM in Windows XP x64, which is supposed to support up to 128GB, but System Properties is only reporting 7.96GB recognized.
The memory is brand new, and working. It was recognized on Windows 8 on the same machine, and Speccy recognizes that there are 16GB from within XP as well.
Is there some trick to enabling support for more memory? I have tried using msconfig to increase the maxmem to 16gb but it would not let me increase it past 8156mb. I tried manually editing boot.ini to the same end but it did not work.
Any help is appreciated.
Go to Start/Run and type msconfig and press enter. Go to the Boot.ini tab,press the Advanced button. Un-check the box next to /MAXMEM=http://www.techsupportforum.com/forums/f10/solved-using-16gb-of-ram-in-xp-x64-702588.html
I can not get this flashdrive to work on my computer...It worked at one point in time but now it is not working and i don't know how to get a driver for it...
Try to reformat it using the HP flash drive utility here -> how to format 32gb flash drive - HP Support Forumhttp://www.techsupportforum.com/forums/f10/ativa-16gb-659514.html
Just wondering if it is possible to run 16GB (2x8GB) RAM on an old motherboard which specifies max 2x4GB RAM. I understand that sometimes they are reluctant to officially support more RAM that's available in the market at the time of release and just hoping that it is possible to fit in more.
Has anyone tried putting in more RAM than the motherboard has recommended?
I am not willing to buy new sticks of RAM, try it and find that it doesn't work. Unfortunately I do not have another computer that has/want that much RAM...
After doing more digging I come to the conclusion it's probably not possible without A LOT of work and investment.
Hi guys, I am brand new to this forum.
Hi upgraded to Windows 8.1 (from Windows 7) a few days ago and I really love flight simulation. I have noticed that while I am playing Flight Simulator X, my computer in general starts to get pretty laggy (Moving windows, typing etc).
I have an i7 2600 (oc 3.9ghz), HD6780 and 16GB of ram installed. I opened up task manager to find that 7.4GB of ram is being used out of 8.5. But it says it is only using 47%!
I might be reading this all wrong, but I believe this is the reason why my computer's performance drops when I use close to 8.5 GB of RAM.
EDIT: I have just looked in System Information and found this, it might be of use.
I opened up task manager to find that 7.4GB of ram is being used out of 8.5.
I have no idea how you get that. Task manager clearly shows that you have 16 GB RAM (actually 15.9) of which 7.4 GB is in use. That is very close to 47%.
From the display it seems quite clear that whatever problems you are having, RAM is not the cause.
Hello,I have HP Pavilion TouchSmart 15-b159sx Sleekbook and I want to upgrade the RAM to 16GB.My hardware specification:http://support.hp.com/us-en/product/HP-Pavilion-15-Sleekbook/5330569/model/5378819/document/c0373048...1.Is it possible regarding to the hardware specification?2.Will changing the ram to 16GB make a noticeable difference?Best regards,http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Upgrading-ram-to-16gb/td-p/5675541
Hello.Im wondering after reading this old post, if i can upgrade the ram to 16gb even if the maufacturer sais that the max is 8gb.that would be If its possible for my model HP Pavilion DV7 4320el motherbord = Model 163E (CPU)chipsetmodel = Havendale/Clarkdale Host Bridgesouthbridgemodel = HM55cpu = Intel Core i5 CPU M 480 @ 2.67GHz8gb ram512gb ssd
That laptop and yours are similar but it had a Quad Core processor. Yours has the HM55 chipset and the specs on the chipset say 8 gigs maximum memory. 16 gigs might work but I would bet against it. If this is "the Answer" please click "Accept as Solution" to help others find it.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/16gb-RAM-upgrade-DV7/td-p/5640016
Hi,I have a hp pavilion 15 n242se with 8GB of RAMI want to upgrade to 16GB of RAMCan you help me please?I don't know what is the best type of RAM to My device.
See p. 42 of the Manual here: Manual The specs say your laptop came with 4 gigs, how does it now have 8? There are two slots and the Manual says it can take 12 gigs, a 4 gig module and an 8 gig module but we have figured out here it can take 16 gigs or 2 x 8. What you need to get kind of depends on what you already have. If you have a single 8 gig module I would try to find the same. If you have 2 x 4 gig you have to replace them anyway and this is the specified 8 gig memory module: 8 GB memory module PC3L 12800 1600Mhz Shared 693374-001 for which this would be compatible: https://www.amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/dp/B00CQ35HBQ/ref=sr_1_3?ie=U... One thing I will add is that many computer users are disappointed with the 8 gig to 16 gig upgrade. 8 gigs is a lot of memory and you may not even be using the entire 8 gigs so that upgrading will have very little effect on performance. But in your case the upgrade is easy to do and whether to upgrade is your call. Post back if you have any more questions. If this is "the Answer" please click "Accept as Solution" to help others find it.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/upgrade-to-16GB-of-RAM/td-p/5767158
Any idea what is going on? Task manager or process explorer doesn't show anything taking up 16GB's of ram usage, yet its maxing out.
Tried upping the pagefile but to no avail.
Mobo: MSI Z87-GD65 Gaming
PSU: OCZ ZX Series 850W 80+ GOLD
GPU: NVIDIA EVGA GeForce GTX 670 FTW
CPU: Intel Core i7 4770k
CPU Cooler: Stock i7 cooler
Case: Corsair 600T Special Edition White Graphite Series?
RAM: Corsair Vengeance 16GB DDR3 1600mhz
Hard drive: 2TB Seagate Barracuda 7200RPM
Hi Moldypoato and Welcome the Eight Forums
We have had this discussion so many times. Modern OS from Vista onward use all the ram to load the os and everything possible into it. Why have ram and have it empty when it is the fastest method of loading and unloading data. Superfetch loads stuff into ram. Programs you use often. Then they are ready right away. Don't fool with this as it will cause your computer to run slower and even crash with a BSOD
Read about the subject here:
SuperFetch: How it Works & Myths
Go to this thread for more information so much ram NOTE I dont have the issue right now with the gb ram usage when i ran the dds thing Quote DDS Ver - - - NTFS AMD Internet Explorer BrowserJavaVersion Run by Mario at on goes up to 15.9/16gb usage RAM - - Microsoft Windows Home GMT - AV Windows Defender Disabled Updated D DDC A- F- fae- E -DA C ACF AV AVG AntiVirus Free Edition Enabled Updated D F- AD- C -C - EE F SP Windows Defender Disabled Updated D DDC A- F- fae- E -DA C RAM usage goes up to 15.9/16gb ACF SP AVG AntiVirus Free Edition Enabled Updated F D B- - CC-F - BEAE Running Processes c PROGRA AVG AVG avgrsa exe C Program Files x AVG AVG avgcsrva exe C WINDOWS RAM usage goes up to 15.9/16gb system svchost exe -k DcomLaunch C WINDOWS system svchost exe -k RPCSS C WINDOWS system svchost exe -k netsvcs C WINDOWS system svchost exe -k LocalSystemNetworkRestricted C WINDOWS system dwm exe C WINDOWS system nvvsvc exe C Program Files x NVIDIA Corporation D Vision nvSCPAPISvr exe C WINDOWS system svchost exe -k RAM usage goes up to 15.9/16gb LocalService C WINDOWS System svchost exe -k LocalServiceNetworkRestricted C WINDOWS system svchost exe -k LocalServiceAndNoImpersonation C Program Files NVIDIA Corporation Display nvxdsync exe C WINDOWS system nvvsvc exe C WINDOWS System svchost exe -k NetworkService C WINDOWS System spoolsv exe C WINDOWS system svchost exe -k LocalServiceNoNetwork C WINDOWS system WLANExt exe C WINDOWS System svchost exe -k utcsvc C Program Files x Hi-Rez Studios HiPatchService exe C Program Files NVIDIA Corporation GeForce Experience Service GfExperienceService exe C Program Files x AVG AVG avgidsagent exe C Program Files x AVG AVG avgwdsvc exe C Program Files x NVIDIA Corporation NetService NvNetworkService exe C Program Files NVIDIA Corporation NvStreamSrv NvStreamService exe C Windows runSW exe C WINDOWS SysWOW PnkBstrA exe C Program Files Qualcomm Atheros Network Manager KillerService exe C WINDOWS system svchost exe -k appmodel C WINDOWS system svchost exe -k imgsvc C Program Files x REALTEK REALTEK USB Wireless LAN Driver WPSService exe C WINDOWS system dashost exe C Program Files x TeamViewer TeamViewer Service exe C Program Files x AVG AVG avgnsa exe C Program Files x AVG AVG avgemca exe C Program Files NVIDIA Corporation NvStreamSrv NvStreamNetworkService exe C WINDOWS system svchost exe -k NetworkServiceNetworkRestricted C Windows SwUSB exe svchost exe C WINDOWS system sihost exe C Windows SystemApps Microsoft Windows Cortana cw n h txyewy RemindersServer exe C Windows System RuntimeBroker exe C WINDOWS system SearchIndexer exe C WINDOWS system taskhostw exe C Program Files NVIDIA Corporation NvStreamSrv NvStreamUserAgent exe C WINDOWS Explorer EXE C WINDOWS System svchost exe -k UnistackSvcGroup C Windows SystemApps ShellExperienceHost cw n h txyewy ShellExperienceHost exe C Program Files x NVIDIA Corporation Update Core NvBackend exe C Windows SystemApps Microsoft Windows Cortana cw n h txyewy SearchUI exe C Program Files NVIDIA Corporation Display nvtray exe C WINDOWS system SettingSyncHost exe C Program Files Microsoft Xbox Accessories XBoxStat exe C Program Files x Steam Steam exe C Program Files x Skype Phone Skype exe C Program Files x Opera opera exe C Program Files x Opera opera crashreporter exe C Program Files x Opera opera exe C Program Files x Opera opera exe C Program Files x Opera opera exe C Program Files x Steam bin steamwebhelper exe C Program Files x Common Files Steam SteamService exe C Program Files x Opera opera exe C Program Files x AVG AVG avgui exe C WINDOWS system fontdrvhost exe C WINDOWS SysWOW ctfmon exe C Program Files x Common Files Java Java Update jusched exe C Program Files x Intel Intel R Management Engine Components DAL jhi service exe C Program Files x Intel Intel R Management Engine Components LMS LMS exe C WINDOWS system ApplicationFrameHost exe C Program Files x Opera opera exe C Program Files x Opera opera exe C WINDOWS system taskhostw exe C Program Fil... Read morehttp://www.techsupportforum.com/forums/f50/ram-usage-goes-up-to-15-9-16gb-1050266.html
I just ordered a new xps 8900 from Dell with 16Gb ram. Can anyone tell me if it comes with 4 4Gb modules or 2 8Gb modules?
Hello:I want to upgrade my notebook RAM from 8GB to 16GB.Is it possible on my model m6-w103dx?kmrcal
Hi, Yes but you need Authorized Service Provider parts because: MemoryTwo SODIMM slots - non customer accessible / non-upgradeableDDR3L-1600 Dual Channel SupportSupports up to 16 GB of system RAM in the following configurations:16384-MB total system memory (8192×2)12288-MB total system memory (8192×1) + (4096×1)8192-MB total system memory (8192×1) or (4096×2)4096-MB total system memory (4096×1) or (2048×2) Source: Maintenance and Service Guide Link: http://support.hp.com/us-en/product/HP-ENVY-m6--w100-x360-Convertible-PC/8499296/model/8901594/manua... Regards.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/RAM-upgrade-to-16GB/td-p/5598523
One of my friend asking me about would it be okay to put 16GB ram on HP DV6-6168tx notebook. I have no experience on how will it get along with the performance, so I need your opinions.
1) would it effect on performance of the notebook? I mean would adding that much of huge ram on DV6 will slow it down rather than giving more performance?
2) would it be unstable adding 16GB ram when running multiple vmware?
* notebook has I7 second gen proc, HD 6770M, 8GB 1333 DDR3 ram, intel HM65 or 67 chipset. cant remember. hp has mentioned it supports 16GB.
* he says that he needs this amount on purpose of running multiple virtual machines and for programming.
thank you. any suggestions welcome
EDIT:thanks you for moving to right thread. I thought it will be somthing like general question. sorry for the inconvenience.
As far as I know the DV-6 will only support 8 gigs. What model number?http://www.sevenforums.com/performance-maintenance/229234-16gb-ram-hp-dv6-notebook-performance.html
Unless I do a Windows Anytime Upgrade, or unless I can get rid of this jet-engine of a CPU cooler, I can't stick more than 16GB of RAM on my motherboard anyway. So what gives?
This motherboard supports up to 64GB.
Quote: Originally Posted by HoneycombAG
Unless I do a Windows Anytime Upgrade, or unless I can get rid of this jet-engine of a CPU cooler, I can't stick more than 16GB of RAM on my motherboard anyway. So what gives?
This motherboard supports up to 64GB.
You pretty much answered your own question.
Home Premium x64 has a 16GB limit.
Memory Limits for Windows and Windows Server Releases (Windows)
Some people say to put it on an old spindle drive, but isn't that a bad idea? Won't that slow things down, badly?? What happens without one that is so bad?
I have 8GB of RAM and my page file is almost never touched. On my desktop, i run the pagefile on my spinner drive and since it's hardly used, it hardly seems to have any bearing on performance.
If it was ok to run without a page file, I would think MS would shut it off upon sensing you have enough RAM, but they don't. It's just like they disable defrag when it senses you have an SSD.
I just build my new pc and i installed 16 Gb of Ram(CORSAIR VENGEANCE), when i installed windows is sat it to activate later. when i had installed windows and were booted intro windows it used all 16Gb, and all was fine, but then i had to activate windows and at the time my internet was down so it didn't work. so windows said that my windows were a pirate copy, butt any ways i got my windows activate later that day butt windows says that 16GB of ram is detected butt only 7,97 can be used. PLz Help!.
Is your windows legit?http://www.sevenforums.com/performance-maintenance/233036-windows-sees-16gb-ram-but-can-only-use-7-97-a.html
weirdest think happened. i was using a software hddregenerator and i made a bootable usb pen drive using it . But after the software formatted the pen drive ,now the total space is shown as 1.91 GB instead of the original 14.8 GB. How do i bring my pen drive to its original size. Formatting again dosent work !!
what does disk managment show?
right click computer>manage>disk management>
Hi everybody here, this is my first laptop: Lenovo g50-45 I'd like to upgrade its 4db (1x4gb) ram to 16gb (2x8gb), but I'm not sure the new one is match or not.I'm a begginer, so please help me. My laptop details:Lenovo g50-45 with AMD A8 cpu and 64bit win10previous ram: Ramaxel 4gb 1600 Mhz DDR3 (RMT3170ME68F9F-1600)new ram would be:2 x Kingston 8 GB RAM 1600 MHz DDR3L Non-ECC CL11 SODIMM 204-Pin Memory Module Thanks,Suhttps://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-g50-45-ram-upgrade-4gb-to-16gb/td-p/3385799
So long story short I ended up getting an elitebook 8560w this week and it needs ram. Just wondering if I should get 8gb or 16gb. This is a do-everything-I-need-you-to-do laptop. I was shopping for a gaming rig but life intervened and now I need it to be a work machine I can use to demonstrations with...so no alienware! lol.
Ok, so the most taxing things I can think of doing with it would be:
- Running a movie on the 47" TV from it while doing work on laptop
- Playing some games, mostly Dota2, maybe some others but really just dota2.
- Dual monitor setup (triple if possible), for database management, not really system taxing other than having the 3 monitors to keep multiple windows open at the same time.
So does it make any sense getting 16bg or just go with 8gb?
8 would be fine for most of that; but the 16 would be beneficial for development if that's what you're doing DB management-wise.http://www.techist.com/forums/f84/hp-elitebook-8560w-8gb-16gb-276357/
Hey guys, so the other day I found out one of my Modules was faulty (Corsair Vengeance 16 GB kit) and i took it out and tested the rest and the board DIMM slots, everything else was great.
So today i received my replacement 4GB Module and at first it was saying 16 GB (12 GB usable) in System, I took all the ram out and reseated the 4 Modules and it showed 16GB in Bios and Memtest86 (which was fine)
Thing is now it says 16.0GB (15.0GB usable) in Control Panel > All Control Panel Items > System why is that? is it normal?
Don't matter now, I decided to format, that seemed to fix it.http://www.sevenforums.com/hardware-devices/232222-16gb-15gb-usable-help.html
I am turning to the community to find out if anyone has installed 16GB of memory in their Y580. Lenovo's manual and website says that 8GB is the maximum supported, but some posts have indicated that it might support 16GB. I need to hear from someone who has actually tried 16GB of RAM in their Y580 as to whether it worked as this is the only thing holding me back from purchasing the Y580.
Go to Solution.
According to Crucial on their site the max is 8 GB for the Y580 And since Lenovo says the same,i would go with that. However i would be interested to hear otherwise.https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y580-16GB-RAM-Support/td-p/811271
Hello, Can I upgrade this memory "SODIMM DDR3L 2x8GB 1600MHz Kingston HyperX Impact, HX316LS9IBK2/16"on Laptop Lenovo G50-45 (80E301J3YA) 15.6",AMD A8-6410/8GB/1TB+8GB/R5 M330-2GB.Installed ram on laptop is Ramaxel 2x4GB, DDR3L, 1600mhz, 1,35 V, cl 11.Only latency is different CL9 of Kingston HyperX Impact on my laptop is CL11. Thank you for all your assistance.https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-g50-45-ram-upgrade-to-16gb/td-p/3453160
Hello all I noticed when poking around in my computer settings and hardware information that my RAM is showing Gb but only Gb are quot usable quot I have been looking all over creation to find out why but to no avail I am utilizing Windows Ultimate -bit OS AMD Phenom II x T ASRock Extreme mobo Gb sticks of G Skill Ripjaws RAM installed usable) 16Gb (4Gb DDR ram and a NVIDIA GeForce GTX graphics card I have tried all sorts of things from tweaking the volts a bit which showed Gb usable out of installed and crashed the computer to putting one stick in the mobo at a time and booting with each stick this gave me short beeps when trying to boot two of the sticks individually As a side note When I have all RAM in 16Gb installed RAM (4Gb usable) it shows all in my bios and on my System Properties I now have the sticks in that didn't cause the -beep error which is Gb and it's only showing Gb usable On another note from time to time when booting I get an error that says to quot reboot and select a bootable device quot even though the HDD 16Gb installed RAM (4Gb usable) has not been changed or manipulated in any way If all of these things are able to be addressed through a tweaking of my bios I can't seem to find an easy way to do it anywhere My apologies if I missed a thread that pertained to this issue but I have a bit of a Frankenstein computer on my hands here and could use some advice Thank you in advance
Hello and welcome Absalom mate try a memtest first up maybe you have some bad sticks or slots even .
You need to make a bootable disk then set the BIOS to boot from the optical and then let it run for at minimum of 8 passes unless you get errors straight away see RAM - Test with Memtest86+
Just brought a xD card adapter for my Fujifilm F30. As I will be going to Melbourne and I would love to take some filming and things.
Yestersday I spoke with Jessop about this and she say inserting 16GB microsd with xd card would crash my camera. The only maximum size for my camera is 2GB
Is there way that I might could upgrade my firmwire of my camera this might accept higher size of card? It just that I cannot afford a new camera.
Tho if it had to be 2GB but I'm still happy with it as 2gb microsd are cheaper then xD
I just upgraded from 8GB to 16GB RAM.
I have a 1M Page File set up on a secondary drive.
I use Acronis to do daily backups of my system.
I have a desktop Gadget that monitors CPU, Memory and Page File usage.
Memory usage has yet to hit 50% with all sorts of apps open at once.
For example, I run giants like Skyrim and other applications at the same time with no Page File usage. Zero. Nada.
Here's the question:
Can anyone explain to me in plain English why Acronis is the only program that still uses that Page File?
I don't get it...
Acronis (TrueImage?) probably uses the page file as temporary buffer space to compress the backup, or to restore it...http://www.sevenforums.com/performance-maintenance/217269-16gb-ram-acronis-still-using-pagefile.html
Are you at least hearing the Windows device-connect ding/dongs when you connect and disconnect? See if this might help How to Cleanup and Remove old USB Storage Drivers
I purchased one Satellite P50-B-11L that has 8GB of RAM memory.
I would like to add additional 8GB. I saw that the form currently mounted in black slot is a DDR3L (then operating at 1.35V correct?)
The problem is that the free slot (white) has recorded on the writing 1.5V
I must therefore buy a DDR3 (whitout "L" then 1.5V) for the white slot or not?
Thank for help,
No one has ever asked this question?
Anyway, I put a DDR3L same as the original slot white my own risk. It works very well, fast and the BIOS detects 16GB. Perhaps the memory operates at 1.5V without problems because it has a tolerance, or the motherboard detects the memory DDR3L and lowers the voltage to 1.3V. I do not know!
I want to Why Drive shrink more than 16GB? cant I C shrink my Drive C by GB so I can create a new partition and install the pre-release of Windows My drive C is GB total and it has around Surprisingly exactly GB of Why cant I shrink Drive C more than 16GB? free space I go into quot Computer Management quot and then go into the quot Disk Management quot under the quot Storage quot tab I right click on quot C quot and click on quot Shrink Volume quot After it finishes quot Querying Volume for Available Shrink Space quot it says the following quot Total size before shrink in MB GB Size of available shrink space in MB GB Enter the amount of space to shrink in MB Gives me box to type in Total size after shrink in MB Goes up and down with above box You cannot shrink a volume beyond the point where any unmovable files are located See the quot defrag quot event in the Application log for detailed information about the operation when it has completed quot In the quot Enter the amount of space to shrink in MB quot box it wont let me go over MB- About GB even though I have EXACTLY GB free If I can how can I fix this Note The first thing I did when I saw this was Defragment my harddrive Nothing changed The numbers were exactly the same Thanks for your help
Use Partition Wizard home edition Free download Magic Partition Manager Software, partition magic alternative, free partition magic, partition magic Windows 7 and server partition software - Partition Wizard Online
How to Move/Resize Partition with partition manager? Partition Wizard Move/Resize Partition Video Help.
I just checked Lenovo Solution Center (latest verson) and it now reports that the max capacity RAM for my machine (A Thinkpad X1, not carbon, late 2011 i7 model) is 16GB, which I always thought was 8GB!I was wondering if I could stick in a 16GB RAM module then. has anyone done this?All memory modules of this type are 12800 but from what I read online this is fine and teh RAM stick will just be downclocked to 10666. Hopefully someone tried this out and can give some advice. If the memory modules of this type were a bit cheaper I'd give it a try regardless, but I am hoping to hear some feedback.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Upgrade-Thinkpad-X1-to-16GB/td-p/3328963
can i upgrade my hp 240 g3 laptop RAM to 16gb Specifications : Processor - i3Ram - 8gb
Hi, From its specs: MEMORYStandardDDR3L-1600 (Transfer rates up to 1600 MT/s)*2 SODIMM (Core i5/i3); 1 SODIMM (Pentium/Celeron)Standard memory up to 8192MB MaximumMaximum 1333 MT/s with BayTrail M Pentium (1.8 GHz, 1 MB cache) processor; Maximum 1066 MT/s with BayTrail MCeleron (1.86 GHz, 1 MB cache) processor.* Maximum memory speed supported is 1600 MHz, but it will be downgraded to 1333 MHz for systems running the E1-2100 and Pentium N3520 processors, and 1066 MHz for systems running the Celeron N2815 processor.NOTE: Due to the non-industry standard nature of some third-party memory modules, we recommend HP branded memory to ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed.*Maximum memory capacities assume Windows 64-bit operating systems or Linux. Regards.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/can-i-upgrade-my-hp-240-g3-laptop-RAM-to-16gb/td-p/5745938