Windows Support Forum

Problem with internet (cant find local area connection)

Q: Problem with internet (cant find local area connection)

Hi, I just installed windows xp professional version 2002 (corporate) sp2 on my computer.
My problem is that i can't get the internet to work. its worked on the same computer before. I go to my network places and the only connection i have is 1394 connection, when i try to repair this it says; windows could not finish repairing the problem because the following action cannot be completed; Failed to query TCP/IP settings of the connection. cannot proceed. And i cant find the local area connection. Ive been googleing around and it seems that i have to install the TCP/IP protocol, but when i try this it says that i don't have the drivers for it. If this is the problem, that i haven't installed the wright drivers, how do i do that and where do i get them? If not, what do i do?

Please help me

Relevancy 100%
Preferred Solution: Problem with internet (cant find local area connection)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 33.97%

I have a HP Pavilion laptop that was able to connect via wifi, or ethernet, just fine until I recently upgraded it to Windows 10. The problem did not start right away, but could be associated with my security software (bitdefender). The laptop does recognize the router, but when I look into the settings I see that there is no connectivity in the IPv4 or IPv6.

Please let me know if additional info is needed to further diagnose this problem.
 

http://www.techspot.com/community/topics/no-internet-connection-on-laptop.217570/
Relevancy 12.47%

Does a cooling pad work on a laptop that doesn't have vents on the bottom?
I have an HP Probook 455 G1 and the cooling pad doesn't seem to work at all.
Thank you.
 

http://www.techspot.com/community/topics/cooling-pad-problem.217527/
Relevancy 12.04%

Every 10 seconds audio manager will set the volume on my mic to 0 and mute it I have already tried to uninstall it and reinstall it but no result.
It may be malware but I am not sure as of yet. Would really appreciate help right now.
 

A:Realtek Audio Manager Mic Problem

Problem Solved, As suspected it was malware. To fix this launch task manager, then go to start up, go through the list if something dosn't have a icon or dosn't seem to fit in right click and open its file location. If you are definite that it is malware disable it, restart go to the file location and delete all the files.
 

http://www.techspot.com/community/topics/realtek-audio-manager-mic-problem.216938/
Relevancy 12.04%

O.P.
this post was edited
Hi....
My laptop: toshiba satellite l550 ... The part no. Is PSLWSA-01000Q

OS: Win 7 32 bit Professional.

Problem: let me give you an overview of my laptop.... It was very slow until recently I did a system restore ... It is a laptop with fans that rev all the time and has the ability to overheat and shutoff once the laptop gets to about 105 degrees celsius.
My problem today is that I cannot boot the computer past the BIOS ... all the components within the boot menu fail to boot... These consist of in order of my boot settings.

1. P1-Toshiba MK5055GSX
2. P4-MASHITADVDRAM UJ890AS
3. Floppy
4. Realtek Boot Agent
When I clicked to try boot the Realtek Boot Agent an error message came up https://www.dropbox.com/s/1unhqan3mrszmlt/2015-07-19 18.08.14.jpg?dl=0

When I press enter on each of these in the boot menu the tells me the part has failed. Please Help me I would like to fix this issue.
 

A:Toshiba Satellite L550 problem

I am planning to buy a new LT but I'm not quiet sure what's the best one. What is good about Toshiba?
 

http://www.techspot.com/community/topics/toshiba-satellite-l550-problem.216719/
Relevancy 14.62%

I've been having this problem for only the last week or so where my internet will stop working until I restart my computer, even though it says I am connected and internet is available.

The problem is not with my modem or my router. The internet works fine on every other computer.
I've run multiple antivirus scans on multiple programs. Clean.
Drivers are up to date.

Sometimes it disconnects after five minutes, sometimes forty, sometimes hours.
I'm at a loss. Any ideas?
 

A:Internet disconnects and won't reconnect until restart

What is this computers make and model? How does it connect to the Internet?
 

http://www.techspot.com/community/topics/internet-disconnects-and-wont-reconnect-until-restart.200385/
Relevancy 14.62%

When I try and access the internet through any of the main browsers (I.e. Internet Explorer, Google Chrome, Firefox and Safari) they tell me along the lines of 'unable to access the network' and 'this page can't be displayed' after taking a while attempting to load. I also cannot access it through any of my Windows 8 apps. I know it's not an issue with the home broadband itself and is something to do with my laptop as it is running fine both wirelessly and through using an Ethernet cable on all other devices. I would really appreciate some help with trying to fix this asap as I have spent a lot of time researching this issue and trying most things to resolve it without success, I also need to use the internet for loads of coursework over the summer hols and cannot afford to be taking it to a pricey IT technician. Please helppp
 

A:My laptop cannot connect to the internet, even though wireless and ethernet are working

Take a look at the file
\windows\system32\drivers\etc\hosts​there MUST be at least a line reading 127.0.0.1 LOCALHOST
but the question is there anything other than comments in it?
If so, leave the comments and the localhost line and delete everything else.

If you modify the hosts file, then you also need to

ipconfig /flushdns
net stop "dns client"
net start "dns client"

 

http://www.techspot.com/community/topics/my-laptop-cannot-connect-to-the-internet-even-though-wireless-and-ethernet-are-working.195158/
Relevancy 14.62%

I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help

Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
 

A:Windows 7 can't connect to internet through Wifi or ethernet cable

Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
 

http://www.techspot.com/community/topics/windows-7-cant-connect-to-internet-through-wifi-or-ethernet-cable.200026/
Relevancy 15.05%

Hello friends first time long time And essentially I have a dreaded problem with my quot smart TV quot I have one of the Samsung Led Tv to TV not internet router LED connects but s but an older model like a series or The T V has been working fine for the year and a half I ve had it The software updated itself multiple times and nothing ever happened However last night I had to move furniture around and left my modem and my wireless router disconnected for a good or hrs This action apparently LED TV connects to router but not internet reset my wireless router I reset the network and essentially created a new one I connected an XBOXONE laptops tablet and phones and a wireless printer to the network and they all work fine But for some reason the LED does not want to connect to the internet At first it was the apps that didn t connect and essentially the entire machine could not do anything related to the internet So I went online and tried all kinds of tricks which included doing a factory reset but that didn t work Also I tried to manually plug those google DNS numbers of and and no cigar I tried a few cycles where I unplugged the T V and the router and modem for a few minutes and nothing I called my ISP Time Warner Cable who said the problem was with Samsung I contacted Samsung and got no response I contacted the manufacturer of the wireless router Medialink who told me to change the encryption and the WPS settings I played around with the WPA AND WPA and the WPA AND WPA AND THE AES AND THE TKIP AND BOTH AT THE SAME TIME And absolutely nothing works the crooked thing still wont connect to the internet I have read somewhere that for people with comcast routers they needed to get rid of parental settings but my router doesn t have that I tried to disable WPS and that made it worse So I put everything back the way it was I don t know if the issue has anything to do with static vs Dynamic Ips or what I wonder if anyone can give me another tip I may have skipped over Could it be the internal network adapter is damaged all of a sudden and from pure coincidence independent of the reset Is there a way to set all of these things manually I have attached pictures of the whole process so you can see what I mean I can t figure out how to link so http postimg org gallery c tjth i aa nbsp

A:LED TV connects to router but not internet

That's a great set of pictures to illustrate the issue. As yet I've not bought a smart TV and your post has made me less likely to buy one. In your situation I'd try another factory reset for the TV and then set it up with a cable connection to the router. Assuming that goes well revisit wi-fi concentrating on the router settings.
 

http://www.techspot.com/community/topics/led-tv-connects-to-router-but-not-internet.209188/
Relevancy 14.62%

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.
 

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 12.04%

Hello, Im using Medion Akoya laptop, win 7 32bit.. The problem started 4-5 months ago when sound just stopped after a few minutes of use, and as time passed sound worked shorter and shorter, a month ago it worked just so I could hear the windows starting sound, and it stopped after a few secs.. Now I cant even hear it.. But when I plug in headphones or other speakers it works.. I tried reinstalling windows, playing with the drivers and sound options in device manager, tried everything I could find on google.. But either its my low understanding of what people say or just a different problem (I never found a post that had the SAME problem as me).. Please help me if u can, I want to sell my laptop and I cant do that like this..
 

A:Laptop sound problem

Update : I installed the soundcard drivers that I found for this exact laptop, uninstalled drivers that were installed with windows update, installed the driver I downloaded, system sounds worked properly untill I went to youtube and watched a video for like 30 secs.. then it just stopped like it used to when this problem first showed up..
Also I noticed that when laptop goes to saving mode, or whatever(screen goes black) like a black screen saver, and when I move the mouse a bit to wake it and continue the video, it has sound, but stops after a while again..
 

http://www.techspot.com/community/topics/laptop-sound-problem.216439/
Relevancy 14.19%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 12.04%

I own a netgear dgn1000 modem+router and it is not working properly so I am using a sustitute modem right now and when I tried configuring my netgear modem once again using my laptop there is a problem occuring...
I am using internet through wifi through substitute modem...when I connect netgear modem to my lappy for configuring through 192.168.1.1 the site doesnot open in fact internet does not work and when I remove the lan cable through netgear modem and use wifi on my sustitute modem it works fine

note: inernet is now continuously working through substitute bsnl modem only...the problem occurs only when lan is connected through netgear modem...
 

A:Problem configuring my netgear modem

Here's a link for the user's guide containing the install instructions - - Did you use the Install Wizard?
 

http://www.techspot.com/community/topics/problem-configuring-my-netgear-modem.216226/
Relevancy 12.04%

Hello let me explain my situation We live in an apartment complex and there are desktops that connect to the router On an evening we were experiencing extreme lag which we determined was due to traffic on the channels We bought a router that can use ghz and also new compatible adaptors Installed it worked just fine on ghz for a day Then the signal took a dump and ping was between and thousands on all pcs Rebooted the router after reading forums and seeing this as a common issue until reboot and it was fine again Signal took a dive again a day later rebooted again This time only of problem with 5ghz Router the pcs were getting the speed and the other one was barely getting any no more than gb s Rebooted that PC was Router problem with 5ghz fine the Router problem with 5ghz other were under gb s Rebooted and they all switched order again Finally got all working again just for a day until the signal took a dump now I cant get more than PC the same one this time every reboot at max speed Switched them onto the ghz works fine Back to ghz nope nothing clinging to connection for its life on of the PCs All are using identicle adapters feet from router no walls and are set up identicle Channel is on auto as is the frequency have tried mhz mhz and a variety of channels Does anyone have any idea Thank you nbsp

A:Router problem with 5ghz

Make and model of router? How are you accessing the internet, I.e. cable, FIOS?
 

http://www.techspot.com/community/topics/router-problem-with-5ghz.216201/
Relevancy 12.04%

So about a few weeks ago (not exactly sure when it started) my computer stopped allowing me to access certain websites. It started out with only a few, but now it is almost 50-80% not connecting. I do not think it is a problem with my browser. I typically use Firefox, but IE will connect to the same ones Firefox allows, and will also not connect to the same websites Firefox will not allow.

I have searched these forums for a couple of hours now and nothing seems to fit my exact problem, and I am hesitant to use the solutions from other forums because it might further hurt my system. I am not tech-savvy/computer literate to say the least, and I would need a thorough walk-through on how to diagnose the problem, as well as how to fix it.

Any help would be greatly appreciated.
Thanks
 

A:Unable to connect to most websites -- not a browser problem

How are you not allowed to view the website? Does the page show "The page cannot be displayed"? or you are not authorized or something else?

Try running cmd.exe, type "ipconfig /flushdns" without quotes.
 

http://www.techspot.com/community/topics/unable-to-connect-to-most-websites-not-a-browser-problem.177710/
Relevancy 12.04%

Here are my specs Motherboard GIGABYTE G Sniper H CPU Intel Core i - K Devil s Canyon Processor GHz GT s Hard Drive Western Digital Blue WD EZEX Video card SAPPHIRE Vapor-X VXL RAM HyperX FURY GB -Pin DDR SDRAM DDR Desktop Memory Problem video output with Model HX C F x This is sort of a complicated issue I will try my best to guide you through what is happening I started with all of my devices connected including my video card and sound card When the HDMI was connected to the video card the motherboard logo would appear for a split second and disappear to be replaced with a black screen The black screen does not go away and the BIOS menus cannot be accessed I then tried removing the video and sound cards and connecting the HDMI directly to the motherboard Problem with video output The BIOS menu started up and I was able to install my OS and motherboard drivers There are no issues when the computer is RESTARTED but when it is shut down as it needs to be to install the video card sound card there is no video output at all Connecting HDMI to the video card gives the same issue as before I have been able to get video output by using the jumpers although this only works sometimes and I would really prefer not to need to do this every time I start my computer So far I have been able to install my sound hard with this method but the video card is tough Please help nbsp

A:Problem with video output

I should mention that the jumpers I mentioned are used only to reset the BIOS, I apologize for any confusion. Basically, resetting the BIOS allows for video output sometimes.
 

http://www.techspot.com/community/topics/problem-with-video-output.214716/
Relevancy 12.04%

Dear frnds,

I have been using my external hard disk(WD My Passport Essential SE) 1 Tb, since last 6 months, but after a recent virus scan, my laptop is not showing the external hard disk, i have tried using My computer, Manage and Disk management.

I am unable to find external hard disk even in Disk management i.e. it is not showing.
So please can anyone help me in this concern......
I would really appreciate and thanks in advance
 

A:Problem with my external WD 1TB My Passport hard disk

First, try accessing it from another computer to be sure it can be accessed elsewhere. The Western Digital Passport Essential has had a pretty high failure rate as seen in our shop... so the unavailable external hard disk may not have anything to do with the virus scan may have nothing to do with the problem.

In other cases, I would attempt to reinstall the Passport drive. You do not usually cause any damage to the data on the drive when you do this.
 

http://www.techspot.com/community/topics/problem-with-my-external-wd-1tb-my-passport-hard-disk.176021/
Relevancy 12.04%

Resolved DNS on other on one problem working laptop, DNS network computers problem on one laptop other computers on network working I returned home for the holidays with my laptop running Windows Enterprise -bit When I connect to the wireless network my laptop reports that it is connected with internet access but there is no browsing capability at all P P works Steam works but Chrome Firefox Steam browser give me DNS problem on one laptop, other computers on network working the quot This webpage is not available quot page telling me that the DNS lookup failed All the other computers at home are working happily My settings were to obtain an IP address and DNS server address automatically nslookup said DNS request timed out It didn t work with the wireless or the wired internet with an ethernet cable I set up another network by using my iPhone as a hotspot to make sure it wasn t an issue with all connections and my computer could browse just fine using the iPhone hotspot But it didn t work with my home connection The first thing I tried was to use openDNS s DNS addresses and with my home connection It still failed and nslookup gave the same quot DNS request timed out quot I reset the modem router it s combined unfortunately to factory settings and tried directly connecting with an ethernet cable again It worked for half a second and I opened webpages before it stopped and gave the DNS errors again I tried the wireless internet and it still didn t work I can connect to the modem router I made a guest network just to try it and I got DNS errors again When I reconnected to my primary network it worked for half a second again then stopped My next attempt to fix it was going to the cmd prompt and typing ipconfig release then ipconfig renew I restarted my computer and tried again but I still received the same errors with P P working like before I turned off my firewall and tried but it still didn t work Then I tried ipconfig registerdns restarted my computer and tried again Still didn t work At this point IPv has been disabled but it s still not working I restarted the modem router multiple times but it does nothing to alleviate the problem I have Microsoft Security Essentials did a scan nothing detected Also tried System Restore to two days ago got an error about how it failed Summary Using openDNS address Turned off IPv ipconfig release ipconfig renew ipconfig registerdns no virus trojan system restore failed None of the above worked Other computers at home using the ISP s provided DNS server work My computer works with other connections but not my home network Is there anything else I can try Thanks in advance nbsp

A:DNS problem on one laptop, other computers on network working

Fe3C said:





Summary:
Using openDNS address.
Turned off IPv6
ipconfig /release
ipconfig /renew
ipconfig /registerdns
no virus/trojan
system restore failed

None of the above worked.
Other computers at home using the ISP's provided DNS server work[1].
My computer works with other connections, but not my home network.Click to expand...

Good work. The router is fine[1] so don't fuss with it anymore.

Look for an updated driver for your WiFi adaptor.

On any working system run IPCONFIG /ALL and compare it to the results on the failing system. Look for missing Gateway address or IP address like 169.x.y.z

Some concern re failing system restore, but that's not a networking problem per se.

Work on a wired network first and then move to wifi.
Empty all manual settings on the LAN Connection (get properties, scroll to tcp/ip, click property button - - check ALL tabs; delete everything.

You should be able to PING 8.8.8.8 and then PING google-public-dns-a.google.com.
This shows the LAN adaptor has connectivity and DNS resolution.

Now do the very same sequence with your WiFi connection.
Disconnection from the router and then reconnect.
Inspect IPCONFIG /ALL again to look for valid IP addr, gateway addr and valid DNS settings. (not the OpenDNS you had before).

ping 8.8.8.8 ; if this doesn't work, then the WiFi settings are invalid even before DNS is an issue.
 

http://www.techspot.com/community/topics/dns-problem-on-one-laptop-other-computers-on-network-working.174565/
Relevancy 12.04%

How can I get my pendrive to it's previous state just by formatting or anything else.

Do I need to update my drivers after os installation for getting wifi worked ?
 

A:Pendrive and wifi problem

armahee said:





How can I get my pendrive to it's previous state just by formatting or anything else.Click to expand...

Not sure I follow you. When you format the USB drive it will be blanked.



armahee said:





Do I need to update my drivers after os installation for getting wifi worked ?Click to expand...

You will need to install the drivers for your Netbook after so the wifi will work, yes.
 

http://www.techspot.com/community/topics/pendrive-and-wifi-problem.213757/
Relevancy 12.04%

Until recently my laptop, an Asus Vivobook with an i5-processor, touchscreen and a 500 gig harddisk, worked just fine, no problems whatsoever. But when I started playing GuildWars 2 it developped a nervous 'tick'. Let me explain: of course the battery of my laptop doesn't last forever, so sometimes I have to plug it in while playing GW, and as soon as I do that the screen starts to black out randomly, as bad as sometimes every 3 seconds. It turns itself on again, and there's no loss of performance (at least not a noticeable one). It gets worse: when I stop playing it continues to flicker on and off. I know that it's not a heat problem, at least I don't think so. SpeedFan detects temperatures up to 67 degrees while playing, but that's it, my laptop should be able to handle that.

Can anyone help me?
 

A:Laptop problem Asus Vivobook Q301LA

...ok, here's an addendum to my post: at the moment the screen goes blank every time I plug in the charger, and the core temperature is around 51, 52 degrees, so in my humble opinion it's definitely not a heat issue.
 

http://www.techspot.com/community/topics/laptop-problem-asus-vivobook-q301la.204938/
Relevancy 12.04%

Hey all My new computer is a new graphics with Problem cards quot Medion Akoya P -E quot With art number windows It has an NVIDIA GeForce GT graphic card Problem with new graphics cards Original Psu w My old computer is a quot Emachine EL quot windows vista Original Psu w I have bought a Psu from w to have a pin connector for the GTX ti graphic card When installing this Psu in my EL both graphic cards works fine Now I have brand new graphic Problem with new graphics cards cards NVIDIA GEFORCE GT NVIDIA GEFORCE GTX TI Asus Both cards WORKS on my old Problem with new graphics cards computer Now the problem When installing the new Psu w into my medion computer everything works fine When I remove the graphic card from my new computer and put the or the in it the computer wont start getting long beep and x short beep this means problem with graphics card Now I have retested my graphic cards in my old computer and they both works fine so there is a problem probably something within my computer settings I have searched and searched but couldn t find any solution so thats why I m posting it here I am from Belgium so forgive me for my bad grammar Any suggestion will be tried and I am sure all cables are connected probably when I need to install my GT I don t even need to unplug any cables so thats not the problem nbsp

A:Problem with new graphics cards

Wait. So when you put the 630 and 650 in your Medion, it fails?
 

http://www.techspot.com/community/topics/problem-with-new-graphics-cards.192355/
Relevancy 12.04%

Ok so I do not know if this is the right forum or site to ask this question to be honest It applies to Linux though more applies to a networking issue So here is the problem I currently live in an apartment that has its own network that is given to them by their ISP So my router is getting its ip address from their DHCP server router and then I give out my own problem Apartment Network IP address via my own router So Im trying to be able to SSH into my machine or even just to remote desktop onto my Windows side I have my router set up accordingly and I can ssh into my machine when I am on their own network not my own but when I am away I cannot because Apartment Network problem my routers IP address is unique in the apartment complexes network Does anyone know a solution to this I was thinking a VPN into their network Apartment Network problem and then SSH into my own afterwords Problem is I m really not sure if this is a solution and if so How do I do it Thank you for your time I hope someone has a solution to my problem nbsp

A:Apartment Network problem

This is a STATIC route or PORT FORWARD problem and without the consent the apartment owner, neither are possible.

Your data flow is

Code:
ISP == Apt.router---Your.router---your.pc
Assume the Apt.router is at address 192.168.1.1
If yours is anything else, then your lan is isolated from the apt and you have great security.
* to get Public access (eg from work) to your pc, you need to
cross the Apt.router nat, get to your.router and port forward to your pc - - complicated.​If your.router is on the Apt.lan (meaning you disable DHCP in your router)
you are exposed to all the other apartments,
and still need port forward to your PC, and that requires a FIXED address assignment in the apt.router.​
IMO, the conclusion is this is non-trivial, has dependencies on the good will of the apt owner/tech support guy and requires extra diligence on your systems for security & privacy.
This would need (imo) to be more than just 'I want to play games on the Internet'
 

http://www.techspot.com/community/topics/apartment-network-problem.213209/
Relevancy 12.47%

So, suddenly my internet stopped working (im using lan adapters you put in the socket). I ****ed up I think, I was dicking around and I manually changed the ip, subnetmasker and the default gateway to what my laptop has. I copied the dns server adres too, and I made an adres up for the alternative dns server. This obviously didnt do jack ****

So I changed the properties back to "automatically assign ip adres" and I went into cmd, I typed "ipconfig/all". It now shows NO default gateway, and it shows the ip that I copied from my laptop, the dns servers show: fec0:0:0:ffff: : 1%1
Fec0:0:0:ffff: :2%1
Fec0:0:0:ffff: :3%1
Now, I would realy like some help here, since im not a computer expert (as you probably could tell). Ask me what you need to know!
 

A:IP configuration problem

Anyone? I think a mod moved my thread to "networking", why is it moved from "free tech support" -->software, to networking?
 

http://www.techspot.com/community/topics/ip-configuration-problem.212477/
Relevancy 12.04%

A few months ago I made a minecraft server and it worked perfectly. Today I tried to join with external ip and it didnt work but I could before.Is it something important? Is my server working? Is it the router's problem?
I would appreciate any help as soon as possible

Btw my ip is 46.12.115.127
 

A:Minecraft Server Problem

@ 13:50 PDT I can not ping that IP from Southern Calif.
 

http://www.techspot.com/community/topics/minecraft-server-problem.212628/
Relevancy 12.47%

Ive been having one BIG issue with my computer Ive researched alot and tried alot of things but nothing has worked I think that its the SVCHOST issue but I cant find a great usage CPU problem 100% site video on how to delete it Heres whats been happening also I keep my computer on all the time Its stays nice and cool so I dont need to turn it off 100% CPU usage problem I will a couple times a 100% CPU usage problem month or if im going somewhere it stays off till I get back But this has nothing to do with the problem I think Ok So I turn on my Computer after I restart it because of the CPU Insanely Slow PC I get on my usual sites Facebook NOAA Weather Youtube Mail Etc But it seems it doesnt matter what I do Watch netflix play minecraft or dont even have a browser or game open at all my CPU ALWAYS Spikes to and when it does it stays their And doesnt go away until I shut off my computer and re-start it When I try to install something or upload a video to youtube the hour turns into minutes of the CPU jumping to its like it knows what im trying to do and completely stops it by running CPU to so I cant do anything I dont want to pay for anything to get rid of it I would rather do it manually My CPU percentage Jumps in very high s From to to then to then to it just jumps everywhere at a very high speed Here is something even more messed up My Cpu will be showing those High percentages but when I go to Task manager and look at the processes running theirs only - that are running between - CPU Usage And when I play a game For example start up Flight Simulator it takes Cpu But it jumps from to back and fourth FSX is the ONLY game when after an hour runs just fine Any other game I play freezes Extensively The internet then stops doesnt load Applications start to not respond the only thing I can really get to is the Files of my computer and Task manager Regedit and Run Im running on Windows X Home Premium I have a Intel Pentium dual core E GHz Ive never had any problems with the CPU before And so far after trying to research and fix this problem for a couple days Im about to throw this out my window im so pissed I cant do nothing with lag Help nbsp

A:100% CPU usage problem

So what is the process with most CPU usage, in Task Manager? It's gotta be something.
 

http://www.techspot.com/community/topics/100-cpu-usage-problem.189023/
Relevancy 20.64%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.
 

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 18.92%

For about the past month or so, my W7 tower on DSL occasionally loses its connection to the internet so I right click the the icon in the notification area & click trouble shoot & it reconnects yet my iPhone & Ipad remain online no problem.
Why?
 

A:Intermittent DSL connection problems

Clearly the router is doing find and the activity on W7 IS THE ISSUE.
Examine carefully what was active when the connection was lost.
 

http://www.techspot.com/community/topics/intermittent-dsl-connection-problems.207951/
Relevancy 15.05%

My windows 7 laptop can connect to the internet, but unable to browse.

I can ping www.yahoo.com with zero loss
when I type ipconfig I am seeing my IP address

I have 4 other computers connected to the internet at home here no issues, it is just this one computer.

I have tried multiple browsers. I have tried both wired and wireless I even copied a chrome installer exe from a usb drive to the computer and ran it. When I double clicked the exe it WAS able to download the chrome software and install it, so I am definitely connected to the internet. But if I try and open a website, chrome says ERR_NETWORK_ACCESS_DENIED.

I.E. and firefox as well, no connection.

Thank you for your help in advance!
 

A:Can connect but can't browse internet

Update, I am able to browse in safe mode with network... but unable to in normal mode.
 

http://www.techspot.com/community/topics/can-connect-but-cant-browse-internet.212468/
Relevancy 14.62%

Alright I ll make it short but informative I can t connect cable able internet Only via to ethernet to connect to the internet without an ethernet cable I have tried pressing the laptop s quot WiFi quot button but nothing has happened The light didn t even change I have tried Only able to connect to internet via ethernet cable rebooting and going into BIOS to see Only able to connect to internet via ethernet cable if there was on option there nothing I Only able to connect to internet via ethernet cable have tried going into Device Manager and under quot Network Cards quot I got options I believe I had options though now I have only first I tried to deactivate it and the reactivate it but that just made it not work at all and when I got home and got my connection back I tried to update the drivers which is when I noticed I only had because I was at school when all showed up so I didn t have connection to update them but it just said that they were all up to date I have tried using the windows recovering tool to go back before the problem occurred Though I did get an error the first time due to my AVG being up so it couldn t complete but after that I tried doing it again with AVG off but the situation didn t change and I know the problem isn t with the router as the problem occurs with different WiFi s In the beginning it would only say quot can t connect to the internet quot over and over again but now it won t even show the available WiFi networks in the area Any help is much appreciated nbsp

A:Only able to connect to internet via ethernet cable

Any suggestions at all? if you require more information in order to come up with a solution, just tell me what you need an ill try my best to figure it out
 

http://www.techspot.com/community/topics/only-able-to-connect-to-internet-via-ethernet-cable.212310/
Relevancy 14.19%

So basically how the title is.

My internet would drop out/freeze. Router doesn't indicate any change in service. I plug my laptop into the modem, and have prime speeds.

Restart the router. Works for awhile.
Reinstalled the firmware manually on the router.
Set the Channel off of "Auto" and put on various options of 9, 10, 11 to avoid clashes with other networks.

Freezes. Now the router indicates there's no connection. Drag the cord out of modem and test. Prime speeds.

Okay, screw this - I went and bought a new router yesterday because, sure, that Belkin one was 2-3 years old. Set it up with same channel settings, etc.
Same.
Freaking.
Thing.

I have a laptop that runs a VPN (for work) that uses it, plus multiple iphones (3) and ipads (2) an AppleTV and a Samsung smart TV.

Like, help me please here.
 

A:Internet Drops Out, Consistent Speed with Modem, New Router - no solution

OK, but lets solve on thing at a time 1) ignore the VPN at work and let's get the home router stabilized.
The mobile devices are difficult to diagnose, so 2) stick with the PC for now.

Standard questions:

did you update the ethernet & wifi drivers on the PC?
have you looked to ensure your new router has the latest firmware?
*if* you have a DSL connection to the ISP, do you have the line filters on EVERY device connected to the phone line EXCEPT the line to the modem? *MUST HAVE*
Got to get these right first.

THEN, find the MTU that's right for you AT HOME and set that into the new router:

get a command prompt
ping -l 1500 -f 8.8.8.8
as long as you see Packet needs to be fragmented but DF set., reduce the 1500 by 8 and iterate with the new number
:: record the MTU that works for your ISP at home
The router conf page is accessible using your browser and HTTP://your_router_address/
You need the router password
set the new MTU. Also set a new router password and save the settngs.

The wired connection should be solid at this point.

The wifi should also be better, as long as you avoid other stations with the same channel.
I assume you've see the post re inSSIDER for wifi setup.
 

http://www.techspot.com/community/topics/internet-drops-out-consistent-speed-with-modem-new-router-no-solution.212305/
Relevancy 11.61%

Apple's decision to include just a single port on its new 12-inch MacBook provoked the ire of many, and perhaps rightfully so. Adapters are the obvious answer for devices lacking a USB Type-C interface but what if you have multiple...

Read more
 

A:Single USB-C port? No problem. InfiniteUSB-C is a viable solution to the MacBook's limitation

I'll bet Apple is kicking themselves right now for now making this little device themselves.

I feel bad for Apple users though... having to spend extra money to get what should be basic functionality.
 

http://www.techspot.com/community/topics/single-usb-c-port-no-problem-infiniteusb-c-is-a-viable-solution-to-the-macbooks-limitation.212016/
Relevancy 12.04%

So to clear out what my hardware is my core is an intel i LGA For a bit of background - A few months back I encountered this problem that my high temperature with too constantly Problem CPU fan started to malfunction Though a few hours later the fan started to work again I used a flashlight to look into the CPU and yeah it was spinning Both of Problem with CPU temperature constantly too high them at equal rates So onto the actual problem I few days ago I just got my PC fixed since my vid card malfunctioned Fearing it was overheating I downloaded speedfan and now constantly check my GPU temperature However what worries me now is that it constantly reads my CPU temperature to be around - Celsius The frightening thing is it s ALWAYS at that range Even when I just turn my computer on despite it being in air-conditioning the temp is always at that range I also asked the guy who fixed my PC and said that it was a problem but that C is standard for a PC that s been used for hours Since I m kind of lazy to screenshot upload I ll just type out what it reads in Speedfan CoreTemp and CPU Thermometer Speedfan GPU C System C CPU C AUX C SMIOVT - C HD C Core C CoreTemp Tj Max C Core C Min Max Core C Min Max Load varies from - CPU thermometer reads relatively the same with a - C range What the hell is up with my PC and what can I do to solve it nbsp

A:Problem with CPU temperature constantly too high

Hello, omni23414.
It could be a miscalculation on the part of the on-die sensors, or a horribly failing cooling system.
I've checked Google for that chip's average temps, and they aren't supposed to be that high.
My CPU isn't a multi-core, so it by default doesn't generate much heat, but it's overclocked enough to make a toast.

Try disabling any 'Quiet fan' features in your mobo's BIOS, and check the temps.
For how long have you had this problem? Only recently, or since Day 1 of the assembly?

Try taking off all the fans and checking them individually. Check whether any fan is malfunctioning. If none is, it could be a case of bad case airflow. Or miscalculated temps.

Still, give me some more details on which programs you mostly run, how much load they give the CPU. I'll abuse Google for more information on your case.

Good luck!
 

http://www.techspot.com/community/topics/problem-with-cpu-temperature-constantly-too-high.179473/
Relevancy 12.47%

I have a speaker installed in my cpu and it work just fine.
my computer is windows 7.
and my headphone does make sound when I plug it on my computer and work just fine with other device than my computer.
Question :
why is it only the right side of the headphone is working while the left side of it only make a static noise?
please help. I've tried everything I could find in youtube and other resource but none of them seems to have the same problem as mine

thx
 

A:Headphone problem (?)

Have you tried plugging the headphones into something else (radio, mp3 player, another computer) to see if it might just be a problem with the headphones and not the computer?
 

http://www.techspot.com/community/topics/headphone-problem.211350/
Relevancy 14.62%

Hello So a description of the issue I ve had this about times now spread out over a couple of months The internet will just completely randomly without apparent trigger stop working completely When I check the router will still have an IP and the quot Internet quot light will still be flashing green indicating active internet connection on the front panel So far this has happened at completely random times - While playing a game LoL the internet just cut out and didn t come back for hours - I came back from a shower and the internet wasn t working anymore similar to other times - I was working on a school document not using any internet at the time Skype was running maybe Steam and it just cut out Et cetera The reason I don t think it s a disruption from the side of my ISP is that sometimes clicking quot Renew Lease quot in the router page seemed to fix it though sometimes it wouldn t work until I d refreshed it multiple times Also the internet light doesn t internet but connected, periodically cuts Router stays out go out on the router and Router stays connected, but internet cuts out periodically usually there isn t even any problem indicated in windows except from the internet just not working I e no yellow exclamation mark in the little internet icon Further information The router is a by this time quite old Netgear Wireless GR v and I have upgraded the firmware to the latest version Also my phone AND tablet will remain connected to the wireless network but without any usable internet connection I have double checked all the cables and connections everything seems to be in working order I live in an apartment building and we all share a big internet connection I have a cable coming in from a central modem so I don t have a specific connection that I can contact an ISP about which also means I have no modem to configure or help me Any advice would be greatly appreciated especially regarding whether or not it could be my router at fault and if a new one could fix it Thanks in advance nbsp

A:Router stays connected, but internet cuts out periodically

This isn't my area of expertise by a long shot but I have had these issues as well with my cable set-up. Sometimes I needed simply to restart my router. I have found at other times I would have to reset the box the cable company installed in our cellar by powering it off for 10 seconds and then on again. Once in awhile I will have to do this to my modem.

Our biggest issue was the splitter. It went bad and since it was outside the house and Comcast's equipment they replaced it for free which restored everything to working order.

I would say though that it is probably time to replace the router. I had a good Linksys G for years but then it would constantly drop connections. I replaced it with my current Netgear and it has served my entire household well.

Good luck and let us know how it turns out.
 

http://www.techspot.com/community/topics/router-stays-connected-but-internet-cuts-out-periodically.204922/
Relevancy 12.04%

Hello there, so here is the really weird problem I am having

When I connect pc to pc monitor, it gives black screen (the ms-dos screen were you have the "_" blinking on the left top)

When I connect pc to my TV, it works all good.

Here is the strange part:

When I connect my pc to my TV and it works, if I unplug the cord and connect it back to pc monitor, without shutting down the pc, IT WORKS! ...

graphic card : geforce750, hdmi cable

Any idea what is going on and how to fix it?
 

A:Really strange graphic card pc monitor and TV problem

Try updating your video card drivers

http://www.geforce.com/drivers/results/83080
 

http://www.techspot.com/community/topics/really-strange-graphic-card-pc-monitor-and-tv-problem.211182/
Relevancy 16.77%

I have been having this issue for about 2 weeks now. Ive literally tried everything including uninstalling/reinstalling network card, restore points (there are none), a windows update download, and reformatting the hard drive (wont let me). Any help is appreciated. I cant afford a new pc or any new hardware at this time.
 

A:"Failed to query TCP/IP settings of the connection. Cannot proceed."

failed to query tcp/ip settings of the connectionClick to expand...

what did you do when this occurred?

Describe network equipment {modem, router} ISP, and your system.

Connect it all together, get a command prompt, enter ipconfig /all >myTcp.txt
and come back here and paste the contents of myTcp.txt as your reply
 

http://www.techspot.com/community/topics/failed-to-query-tcp-ip-settings-of-the-connection-cannot-proceed.177223/
Relevancy 12.47%

Actually what happened is I opened my cpu to clean out any dust so I cleaned it and even cleaned under the processor with a dry cloth.but when I tried to turn on the pc when everything was arranged,a black screen with a paragraph of error is shown.turns off the pc automatically.
My motherboard is fine,it shows a green light in the extreme end.
My processor is working great.
Hard disk is also fine.
But still it is not turning onn. Please help.
 

A:Processor Problem

Did you happen to have disconnected the power cable from the computer and press and hold the power button to discharge any built up static charges before opening and cleaning inside the computer?
You mentioned you cleaned under your processor. Did you pull the processor from the motherboard or was it still attached when cleaning?
Did you re-check ALL wires and connections? Try disconnecting all cables (to motherboard, hard drive, optical drive, video card, etc.) and then re-connecting said cables, making sure they are firmly seated.
Any chance you can take a photo of the error message and post it here?
May I suggest next time do not use a dry cloth, because you can actually build up static charge within the cloth itself and you could have discharged the built up static electricity into (or onto) one of the computer components.
 

http://www.techspot.com/community/topics/processor-problem.210948/
Relevancy 14.19%

Hi there,

The laptop I have is an asus P550C, windows 7.

This laptop came pre-installed with Mcafee Antivirus protection for a limited amount of time. Wifi was working perfectly fine although there were occasions where the connection would disconnect by itself. After the free-trial ended, I did not want to buy the packaged they were advertising so I went to my Control Panel and uninstalled Mcafee. This was when the problem started to occur. The internet access icon had a red x and when I went to diagnose the problem, it said that I needed to connect via an ethernet cable. Since then, I have connected it with an ethernet and internet works and I have also installed AVG's free antivirus software.

I have tried to
type: ipconfig /flushdns
type: nbtstat -R
type: netsh int reset all
type: netsh int ip reset
type: netsh winsock reset

But I still cannot connect via wifi. Please help
 

A:Wifi has stopped working but still able to connect to internet via ethernet cable

C:\Users\jay>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : jay-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : vlan1.phub.net.cable.rogers.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 54-35-30-05-36-68
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : BC-EE-7B-28-57-D7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9dfa:dcc6:3d3b:ae86%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : March-27-15 4:14:52 PM
Lease Expires . . . . . . . . . . : March-28-15 4:14:52 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 247262843
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-51-D7-D4-BC-EE-7B-28-57-D7

DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.vlan1.phub.net.cable.rogers.com:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{A9DA0935-EE1F-4A59-8A97-DDA13A7DFFEA}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:2c47:1b6c:9c1d:d26b(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::2c47:1b6c:9c1d:d26b%14(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\jay
 

http://www.techspot.com/community/topics/wifi-has-stopped-working-but-still-able-to-connect-to-internet-via-ethernet-cable.210787/
Relevancy 12.47%

A couple of my DVDs have what appears to be a grey area, out faded spot, and another has squiggly lines all over it, like someone drew squiggles with a pen. None will play. What's caused this & please... Can it be fixed??
 

http://www.techspot.com/community/topics/dvd-problem.210751/
Relevancy 12.04%

I have owned a Canon Pixma Mp750 Muli-functional printer for several years and it has always worked perfectly on my Windows XP PC.

I have purchased a new Windows 7 PC and updated the printer and scanner drivers from the Canon download website. The printer works great, but the scanner won't scan.

I've tried using the MP Navigator, Scangear and the Windows Scan & Fax facility but the process only gets as far as the calibration stage and stops. I eventually get an error code 2,178,0. I have tried to resolve it by changing the USB port, uninstalling the drivers and re-installing them, but the scanner still won't scan.

Any ideas, guys? The Canon support team appear to think it is a Windows error, but I'm not so sure. The drivers all seem to be installed correctly.
 

A:Canon Pixma MP750 scanner problem

I have canon pixma e500. using windows xp 64 bit. the scanner and copy functions are fine but no print. if I connect it with windows 7, everything works super fine.
 

http://www.techspot.com/community/topics/canon-pixma-mp750-scanner-problem.183104/
Relevancy 14.19%

Dear Experts

My Windows 7 laptop connected to internet via my mobile Samsung Galaxy S3 by tethering portable Wi-Fi hotspot.

I am a technician field and I need to connect my laptop via USB port to an Ericsson MiniLink (telecom NE) node to do configuration.

https://mazrilhisham.wordpress.com/2004/01/01/traffic-node/#jp-carousel-241

Whenever I connect the USB cable from the laptop to Ericsson my internet gets dropped, while this didn?t happen to my coworker who is using the same laptop brand as mine.
By the way the Ericsson software that I installed on my laptop create the attached socket called : "Ericsson USBLAN adapter" on my computer's network and that would be used for the USB communication

http://imgur.com/IRNyoIv



Any advice what should I do to avoid this problem
Thanks
 

http://www.techspot.com/community/topics/laptop%E2%80%99s-internet-via-tethering-gets-dropped-when-connects-to-ericsson-minilink.210600/
Relevancy 12.47%

Hey, I m having a big problem with my router.
I use a wa3002g4 utstarcom router. An year ago everything worked fine.

Now, my pc fails to get an ip adress even though dhcp is enabled. When I manually assign an ip, it connects and I am able to 'ping' as well. But, I still cant connect to router's login page or internet. If I connect using wifi it shows 'Limited or no connectivity'. Please help.
 

A:Router problem: can't get an ip

Try a manual reset. There should be a reset button on the router. This will load factory defaults and allow you to start fresh. If this fails, your device is likely bad.

Edit: BTW I am experiencing the same thing to an extent because of bad service. The bad service is somehow creating chaos with my network. The network functions more smoothly with the ISP connection disconnected. You can try disconnecting your ISP cable and check your network settings without ISP first.
 

http://www.techspot.com/community/topics/router-problem-cant-get-an-ip.210035/
Relevancy 18.49%

Hi all So I got G today from an online webstore today I ve been using a super old button logitech back-up mouse since my G died I ll describe my procces thus far Plugged in G when computer was on No sign of life windows tries to install a driver fails Device manager lists the G under Other devices with a yellow triange telling me no driver is installed Then went to logitech com to download the drivers and support software LGS LGS being the Logitech Gaming Software utillity that is the only downloadable support from logitech com fails to recognize my mouse just the G keyboard I Logitech issues G502 connection/recognition mouse have Tried the troubleshooting option of rebooting and re-installing the LGS no dice However the G does light up during booting up Booted the computer with the backup mouse unplugged and the G plugged in It works cursor movement left right click no advanced buttons for - mins before going back Logitech G502 mouse connection/recognition issues to the Device fail to install and the Device Manager placing it under other devices etc Plugged my backup back in tried manually updating drivers in the Device manager selecting it as a Mice and other pointing devices type of device and choosing the drivers from LGS drivers LGSHidFilter tried all subfolders of drivers but this one was the only one that held any inf files the Device Logitech G502 mouse connection/recognition issues manager recognised as a good drivers Selected the g driver No G driver was listed only a G s It tried to install but gave the error Device could not start code After reading threads in the logitech forum tried the FWUpdate a firmware update for the g option but installer tells me to connect my mouse before proceeding Even though my mouse IS plugged in Plugging it in and out doesnt help As for now im at my wits end I even tried borrowing someones g mouse and encoutered much the same issues All I can think of is to race from booting up with just the G plugged in to either the FWUpdate or the manual install from the device manager and see if the install goes through when it still works Seems rather unlikely and a silly way to go about things I hope anyone with similar issues can help me out any advice is super appreciated P S oh using Win ultimate bit nbsp

A:Logitech G502 mouse connection/recognition issues

I just fixed this exact problem on my Win7 Media Center x64. It's a bit convoluted, but the core of the issue is Windows not recognizing the device type properly. What you have to do is open up Device Manager and assign the drivers for Windows. This should fix the mouse.

Head into Device Manager and click View up top. Choose Devices by Connection. You'll see why in a second.
Expand the top entry until you find a PCI Bus. Expand that, then expand all the USB Host Controllers. One of them should have an entry for G502 Gaming Mouse under it.
Right click it and select Update Driver Software, then Browse My Computer for Driver Software. Now click "Let me pick from a list of device drivers on my computer."
Go down to USB Devices and install it as a USB Composite Device. The mouse should light up. Nice! It still doesn't work, though.
Now there'll be two more entries underneath the USB Composite Device, both of which should be G502 Gaming Mouse. Right click one and go back to the list of device drivers. This time go to Human Interface Devices and select USB Input Device for each of them. A bunch of new devices should populate beneath each USB Input Device, one of which should be HID-Compliant Mouse. Your mouse should now work!
 

http://www.techspot.com/community/topics/logitech-g502-mouse-connection-recognition-issues.205348/
Relevancy 18.49%

Okay so I've read the other threads and figure that...well...I figured nothing.

Audio sounds great. It's from my gigabyte motherboard, not from an expansion card. I have a jumper cable running from my mobo to my video card for the audio signal. When there is no audio playing on my computer, there is a sort of static buzz that has what seems like a specific rate to it... "blip blip____blip blip___blip blip"..... sort of like that

All inputs/recording settings have been disabled.

The only fix I have is to basically open an app (winamp) and have it play audio at 0% volume. It's kind of stupid and would prefer to not have to do this. Any advice would be appreciated. Thanks.
 

A:Buzzing when no sounds play over HDMI connection

I have a jumper cable running from my mobo to my video card for the audio signal.Click to expand...

That's the norm for HDMI. HUMMMMMM or other noise when no sound is being produced intentionally is usually a grounding or cable shielding problem.

To be honest, my laptop HDMI is iffy; by that I mean, a connection to the HDTV at home and at one auditorium is just fine, but at another location, I get hum all the time both with and without sound originating from the laptop - - using the same hdmi cable.

The laptop has a plastic case and of course can not be shielded and therefore subject to 'environmental' interference'

In normal audio circuits, a/c hum indicates poor or no shielding (ie grounding) OR
the leads on the audio cable are reverse - - the ground on the cable is wired (by mistake) to the audio hot lead (ie the input).

On your PC, make sure you have a grounded A/C power cord and the wall plate has an active ground connection.
 

http://www.techspot.com/community/topics/buzzing-when-no-sounds-play-over-hdmi-connection.209553/
Relevancy 12.47%

My system has starting to slow down and sometimes stop when on the net. Seems to be when waiting for a reply to a request like opening a web site. When opening my email I have to wait for a minute because when the page opens and I start to type the screen go blank and the page will redisplay....any thing that I typed will be gone. System is running on an ethernet cable. More problems seems to be when I back page it will take some time before the page will display. Has at times just hang and will not go back.

Another weird problem is when I try to download Flash Player it will not let it download. Just hangs and does nothing.

These program are more on Chrome than on Firefox. Also when I send it my work timesheet Chrome will not display the reply from my company but Firefox will. AT&T has run several test on the DSL line and said all is OK. Eithernet card problem maybe? I am beginning to think maybe a complete system failure is coming.

BTW...Lap top runs fine on wireless.
 

A:Weird problem when on the Net

Disable all browser extensions and add-ons, quit the browser and relaunch it
 

http://www.techspot.com/community/topics/weird-problem-when-on-the-net.209544/
Relevancy 12.04%

HI There is a solution for Pendrive not detecting or usb drive not visible in My computer and device manager Recently I had a problem with Sandisk Cruzer Micro gb pendrive When I inserted the pen drive the system is detecting but it is not visible in Windoes explorer and device manager But it is working in other computers So it is not damaged or virus problem Solution for not visible pendrive infected If you Open Disk management there you will find your pendrive without any drive letter Here the problem is not with the pendrive it is with the system To resolve this Solution for pendrive not visible problem I tried in many ways and installed driver detecting softwares but there is no use Finally I succeeded in the following method The problem occured because unexpectedly the drive was un-mounted To solve you should have Administrator privilages on your local system Later go to Local security policy select Local policies in that select Audit policy and select Audit object access and check Success and apply From RUN type diskpart and right click on it and select Run as Administrator At the DISKPART prompt type automount press enter next type recover press enter next type rescan press enter and exit In Device manager under storage devices find your device not recognized and uninstall it Unplug the device and plug it again then the driver automatically installs and it is mounted to your computer You will get the autoplay window Thats it Solution for pendrive not visible problem nbsp

A:Solution for pendrive not visible problem

This is the only and unique one that was worked!!!n awsome!!
how did u found it???
 

http://www.techspot.com/community/topics/solution-for-pendrive-not-visible-problem.169381/
Relevancy 12.47%

Hello, I used to be a member here a long time ago, but I forgot my old e-mail so I had to create a new account. Here's my story/question....

In April 2013, I bought a PC (Intel Core i7-3770) that came with a GeForce GTX 650 2 GB and used it for 2 years with no problem, until I decided to get a new GPU. I purchased the GeForce GTX 970 SC 4 GB and every so often my PC would restart only in-game. I changed my settings to not automatically restart on error and to write minidump files but my PC never does, it just reboots in game. I monitored my temps and my card never overheated and my PC was cool all the time. I've put the 650 back in for now and no problems so far. Is the 970 I bought too much for this power supply or motherboard? Should I exchange it for an 800 series? any help would be appreciated
mobo: Gigabyte GA-B75M-HD3
psu: Azza Alpha 500watt
 

A:GPU problem

Yes, the problem is probably with the power supply and there is no 800 series. You should probably look at replacing the power supply. That's a $30 power supply and from the reviews I've read people seem to agree that you get what you paid for.
 

http://www.techspot.com/community/topics/gpu-problem.209271/
Relevancy 15.91%

I have an installation folder on my main machine(Windows 7) with all my software. I have repeatedly run into issues connecting odd devices to my shared folder. This time I have installed Windows 10 Technical Preview (on a different machine) and don't understand why it tells me I can't access my own machine. After all these years, you would think user friendly would be a reality. It seems to be a coin toss as to which machines will connect. I hate never knowing I can access my own machine without issue. Here I am trying to install applications but yet I can't get to my storage location.

What is the secret to sharing your machine, so that anyone on the same network can access shared folders?

Edit: I always turn on "Network Discovery" and "File and Print Sharing".
 

A:Network connection issues (year after year)

I'm more brutal via the firewall:

set trust localhost and your lan ip's, eg 192.168.0.1/24

then add two rules for only the PRIVATE PROFILE

inbound allow tcp/udp from 192.168.0.1/24 to any for ports 137-139,445
outbound allow tcp/udp from any to 192.168.0.1/24 for ports 137-139,445
I use a much more complicate scheme in reality to enforce known vs unknown devices and to segregate WiFI from wired access, but that's just me.

In services, ensure these are running

Bonjour Service ( mDNSResponder)
fdPHost
Network Connections
Network List Service
Network Location Awareness

 

http://www.techspot.com/community/topics/network-connection-issues-year-after-year.208880/
Relevancy 14.62%

I dont know how long its been going on but within a internet provider switch from AT&T to TWC its still been doing this. Every time I reset the router name or password it lets me reconnect to the internet, but when I shut it down and boot it up later or after a couple hours it refuses to connect until I switch the router name or security password.

Its a toshiba running windows 7
The adapter is realtek or something like that which im pretty sure is the cause but nothing seems to fix this issue.
Thanks for any info on this.
 

A:Laptop Stops connecting to internet randomly

What is the Model number of the Toshiba laptop?
Does your laptop come with an Ethernet port (most do have one)? If so, try connecting directly to your router with an Ethernet Cable and see if the problem continues.
I highly doubt that its a problem with the Router (but it could be). I believe that you may have a problem with the wireless drivers installed. I would suggest:
1. Download the wireless drivers from the Toshiba website
2. Properly Uninstall the wireless drivers
3. Install wireless drivers from the download (step 1).
4. Wait and see if problem still persists. If so, let us know.
 

http://www.techspot.com/community/topics/laptop-stops-connecting-to-internet-randomly.209164/
Relevancy 12.04%

Hi forum I have changed my power supply because my ex power supply involved in the problem specs was Watt Watt Real model GP B Green with that before it crash down my system was boot up correctly after I hit the Power On button on top of my chassis since a few days ago that I ve bought a new PSU with this spec Green Watt Real OC edition model GP B GOLD plus Gold now the problem is every time I want to turn on my PC first it doesn t boot up but it s powered on and all hardware are in correct position and nothing s weird just actually do nothing until I push or times Reset button or Power button from chassis and then after a while when it re-started again everything goes well and system will boot up perfectly note - new results and experience I decided to have had some tests so I told by myself let s check the computer when it s powered off recently and I did uninterrupted turn it back ON again so it worked I tried several times to power On and power Off shutting down from windows and it worked so I get that when my machine is powered off for half an hour or maybe several hours then it should be handle after my problem PSU changing Weird this problem Weird problem after changing my PSU which I mention and This test was a huge leap in my opinion pluralization - I m thinking maybe it refers to my new and fresh PSU maybe it has a new system delay interrupt or maybe optional Weird problem after changing my PSU setting that can help through this - maybe the problem is related to the cables I m not sure because I double checked the cables and all connections before - if problem is related to the Capacitors so in this case Capacitors are usually swollen but there is no sign of this condition I also double checked Capacitors for assurance - especially this PSU is the best kind of high power supplies and it s new no sign of ripple noise or any suspicious signs of its internal hardware - so we can say no MOBO suspicious no PSU suspicious no Graphics suspicious anything but only RAM at this point we can say maybe problem is refers to the RAM modules because I haven t test it yet and I hope it is nothing to worry - according to recent test we can assuming there should be a common setting or case that helping us through this because if there was a problem with any kind of hardware then why when I test it repeatedly ON OFF uninterrupted there was no sign of a problem and one more thing remember not to there is no sign or overheating of any kind of my hardware too I m always aware about this any help will appreciate in advance Thanks System Specs OS - Win Enterprise x CPU - i Video - GTX Mobo - Asus P X D Premium x chip RAM - GB Corsair XMP x GB MHz nbsp

A:Weird problem after changing my PSU

Any suggestion ? HELLOOOO?anybody's home?game time..
 

http://www.techspot.com/community/topics/weird-problem-after-changing-my-psu.208889/
Relevancy 22.36%

Hello!

I recently went into my AMD Control Center to learn what graphics card I had installed (I have a pre-built PC), and I've encountered a problem.

When I go to the information tab, all it tells me is that my GPU is part of the Radeon R7 200 series. I already knew this, but this doesn't tell me which specific GPU I have in that series (I.e. 250, 250X, 260, 260X, etc). This is what I need to know. I've already tried looking using my Device Manager, and same as the CCC, all it tells me is its in the Radeon R7 200 family.

How can I learn what specific GPU I have (screenshot of CCC below)?

EDIT: I've also looked at it using my DirectX Diagnostic Tool. Same problem.

EDIT 2: I'd also prefer to learn this without downloading any 3rd party software, but I will do that if it comes to it.
 

A:How can I find out what specific GPU I have?

TechPowerUp GPU-Z




Main Features

Supports NVIDIA, ATI and Intel graphics devices
Displays adapter, GPU and display information
Displays overclock, default clocks and 3D clocks (if available)
Includes a GPU load test to verify PCI-Express lane configuration
Validation of results
GPU-Z can create a backup of your graphics card BIOS
No installation required, optional installer is available
Support for Windows XP / Vista / Windows 7 / Windows 8 (both 32 and 64 bit versions are supported)
.. and yes, the author of CPU-Z has granted us permission to use a name similar to his product. Thanks Franck.
Click to expand...

And then match the specifications (memory bandwidth and stream processing units (aka: shaders)) with the details from this link.
http://www.amd.com/en-us/products/graphics/desktop/r7#
 

http://www.techspot.com/community/topics/how-can-i-find-out-what-specific-gpu-i-have.208993/
Relevancy 12.47%

PC Specs CPU AMD Phenom II x T GHz Stock cooler NOT Overclocked MB ASUS M A GPU Radeon HD GB GDDR RAM GB DDR HyperX MHz running at OS Windows Ultimate -bit Hello So these last couple of days I ve been struggling to fix my CPU Overheating problem The first time I noticed this problem was when I was watching a Twitch stream using Google Chrome and I had a few other tabs opened gag YouTube Facebook and all of a sudden I got BSOD the dump process went up to and then the whole PC just froze so I had to manually restart it Upon booting I got a message saying quot CPU Temperature too high please enter setup quot CPU problem Overheating So I did and I saw that the temperature was around degrees celsius I turned off my PC and waited a while turned it on and this time it booted normally and when I checked the temp using HWMonitor it was sitting around - degrees idle with cpu usage at - which I think is weird btw my room is CPU Overheating problem cold since I only turn on the heating when it get s below outside The BSOD happened more times of which twice when I was playing a game quot Grey Goo quot I used an ingame cpu temp monitor and noticed that the temperature went from to degrees in minutes of playing p s CPU Overheating problem I had a svchost exe virus located in Windows Temp folder which according to VirusTotal was a BitCoin miner It was starting with windows and using around of my CPU but now I have it quarantined with Malwerbytes Premium Things I ve tried so far Cleaning the PC from dust Replacing thermal paste Changing the Minimum processor state to it was set to by Razer Cortex Power Plan Using SpeedFan to run the CPU fan at - RPM Scanning and cleaning the PC with Malwerbytes ComboFix RogueKiller ADWCleaner Avast Home Edition Spybot Search amp Destroy Things I haven t tried Installing a fresh copy of windows Hopefully things that you guys will advise me to do Sorry for writing a new Harry Potter book but I wanted to include as many details as I can Cheers nbsp

A:CPU Overheating problem

Just a question about thermal paste and fans:

How many fans in your case? 3 ? 4 ? (Not counting Video Card fans) 1CPU, 2 Case?

Also how big are the case fans, and are they turned up ? Do any of the fans make noise? (Could not be performing at maximum rates)

for your CPU fan is it also running optimally(no noise, fully cleaned out, not bent)?

What brand is the thermal paste that you bought ?? and how did you apply it? an even thin layer enough to cover the chip fully but not too much so that it's overflowing on it?

Edit: Also forgot to ask, have you checked the Motherboard Chips to see if they are overheating? I've seen that a lot but you said that your temp. monitor programs say it is for sure the CPU so.
 

http://www.techspot.com/community/topics/cpu-overheating-problem.208366/
Relevancy 21.93%

Hi guys, I have set up a RAID 0 array using an XFX Revo64 controller card and the Netcell bios setup that cones with it. According to the Netcell bios the array is working but booting into 8.1 I cannot find the drive in explorer and device manager shows the Revo64 as "Generic Mass Storage Controller ".

I am very new to Raid this is the first array I have tried to setup. Any help would be greatly appreciated

Kind regards,
Jay
 

A:Windows 8.1 cannot find RAID array

Why not use the RAID card as more sata ports and then use windows to make your RAID array? I've never used a controller but im sure that it would work for that purpose.
just go on youtube and find a video on how to setup RAID in windows 8. I know its possible for windows 7 to im pretty sure 8.1 will have it
 

http://www.techspot.com/community/topics/windows-8-1-cannot-find-raid-array.208501/
Relevancy 14.19%

My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
 

A:Internet connects but doesnt work on wifi, ethernet works fine

Bump
If there is any more info I can give to help you help me, please let me know.
 

http://www.techspot.com/community/topics/internet-connects-but-doesnt-work-on-wifi-ethernet-works-fine.199827/
Relevancy 15.05%

Hi guys, so my internet has been dropping a lot more recently (I have had this issue for about 4 months now). The odd thing that I cant figure out, is that it only happens on my desktop. Every other computer and phone can connect and doesnt drop wifi like the desktop does. Also, this happens when im wired through an ethernet cord. I have reinstalled network drivers, bought a wireless usb card, tried troubleshooting everything I can that I know how to do. Any other things I could try?

Thanks
 

A:Internet Drops Randomly

Specs for computer (make and model of computer that is having problems -or- make and model of the hardware)? Also, what wireless router (or modem) are you trying to connect to? What is your Operating System?
 

http://www.techspot.com/community/topics/internet-drops-randomly.208315/
Relevancy 12.04%

Hi, I have a Toshiba Satellite Pro C660 with a blank screen. The laptop starts up and goes through its boot cycle fine, but nothing is displayed on the screen.

I've read through tons of forums, but nothing seems to work.

I did the whole removal of battery, power supply and holding the power button for 60 secs... still blank...

When plugging in an external monitor it works perfectly fine, so this eliminates any issues with the CPU / GPU / RAM / HDD, etc.

I re-installed windows 7, which would hopefully eliminate any software issues.

Next logical step was to check the LCD backlight, inverter and ribbon cable... So I replaced the screen, but still blank screen. Just as a side note, the backlight lights up with both old and new display, but no picture.

This leaves me to think that it might be something in the BIOS?

Any suggestions / ideas?
 

http://www.techspot.com/community/topics/toshiba-black-screen-problem.208461/
Relevancy 12.04%

Hi there! I'm using HP presario c700 . During few days I'm going to see display is not working properly. I mean I can't see anything without sound, It's display is going to show a black shadow with some scratchs.

Please anyone say something, what should I do?
 

A:Laptop Screen Problem

Hi there, have you tried hooking up to an external monitor? This will help you determine if it's a problem with the screen or logic board.
 

http://www.techspot.com/community/topics/laptop-screen-problem.208402/
Relevancy 12.04%

Hi there I ve recently bought a second hand laptop because it was cheap and seemed to only have a minor problem which I hope to be able to fix So far problem TK Easynote boot Bell Packard I ve not been able to so I thought I d ask here for Packard Bell Easynote TK boot problem some help Specs Packard Bell Easynote TK CPU AMD Phenom II X N GHz Videochip AMD Radeon HD M GB VRAM RAM GB DDR orginal OS Windows Home Premium So the problem is that if I try to boot it Packard Bell Easynote TK boot problem about times it starts up I can hear the fan and HDD starting and see the lights turn on Then after a couple of seconds before seeing anything on screen I hear the fan stopping while the lights remain on The times it boots up properly and everything works What I ve Packard Bell Easynote TK boot problem done so far remove battery and power adapter reinstall RAM both at once and one by one hold down power button for a minute and try again with the power adapter connected This doesn t appear to do anything much I haven t removed the CMOS battery yet because it s embedded in a peculiar way and I m not familiar with how to remove it yet Then during one of the few sessions where I was able to boot successfully I installed the newest BIOS-version from the Packard Bell site This also didn t do anything Then since I wanted to do it anyway I started with the installation of Arch Linux where so far I ve only wiped the entire HDD and repartitioned it then I was too busy and couldn t complete it This doesn t matter much as long as I can get into the BIOS properly I ll be fine I m a Linux newbie but have successfully installed Arch Linux on a very old laptop So what I wanted to ask do you know any way to make the startup work everytime Do you have any ideas what it might be My theories so far - It s probably a hardware related problem since it still occurred after BIOS-update and full HDD-wipe without OS - broken powerbutton connection somehow -- gt replace powerbutton - broken fan overheating -- gt shutdown - broken fan cable sometimes does connect correctly I m curious if you have any theories on how to save the laptop Kind regards Ilja nbsp

A:Packard Bell Easynote TK boot problem

The laptop may need its thermal pads or paste replaced. The motherboard may be detecting a false over-heating signal...
 

http://www.techspot.com/community/topics/packard-bell-easynote-tk-boot-problem.207489/
Relevancy 15.05%

My laptop (Asus G73J) is connected to my router, however, has limited access. All other wireless devices in the house are able to connected to the router with internet, including another laptop. I have also already contacted my internet provider and my router provider to no avail. I looked at many other threads to see if anyone else has had my problem and as of now everyone who has, was able to fix it in ways that have not worked for me.

I have already put "ipconfig" in my command prompt and found out that I do not have a Default Gateway, in other words this shows up "Default Gatway .....:". Additionally it says that the Tunnel adapters have "Media Disconnected". I have been working on this for about 3 weeks, Please Help.
 

A:I am connected to the router with no internet

I've had similar intractable problems from time to time where even after reading up and posting for assistance you still remain stuck. Although I don't know the answer things that I'd try are checking to see if there is a firewall and turning it off briefly for purposes of elimination. I'd check to see if there is an updated driver for the wireless card. Have you been into Control Panel, Network and Sharing Centre and tried to set up a new network? Any problems flagged up in Computer, System Properties, Device Manager?

You haven't mentioned whether this is a problem that has arisen after a period of normal operation or whether it has been present from day one. If it worked OK previously as a last resort there's the return to factory condition option but it's a pain and you'd lose everything on the laptop so I'd hold fire on that. Can it connect to the router successfully with an ethernet cable?

Anyway that's a few things to think about if you've not tried them all already.
 

http://www.techspot.com/community/topics/i-am-connected-to-the-router-with-no-internet.208139/
Relevancy 12.47%

Hello guys gt Nvidia problem 240 I ve just registred Nvidia gt 240 problem to this forum I hope there is somebody who can help me Nvidia gt 240 problem So the Nvidia gt 240 problem problem is with my Nvidia graphic card gt as you can see in the thread title I must say that I have sent emails to nvidia support ofc no answer I have tried to post threads at their forums but every time thread DISAPPEARED Also I ve tried to send PM to forum staff and guess what No answer nothing Im just so pissed that company like Nvidia doenst give a crap I must mention that I ve tried to look for solutions on web but the only advice was to take sledgehammer and to smash card into milion pieces System Windows Ultimate b I will try to give you guys most informations I can Here are couple of screenshots so you can see whats going on screenshots taken with Lightshot so feel free to click on the links http prntscr com rxtmz http prntscr com rxu j At second screenshot you can see that image on desktop is fine For some reson image becomes ok as soon as I turn off Desktop Windows Manager in Task Manager menu Why I have no clue I ve tried - different drivers same crap Tried reinstalling system - same crap Please help me I would be very grateful nbsp

A:Nvidia gt 240 problem

U are giving u'r self the answer. That card is old and needs to be replaced.
 

http://www.techspot.com/community/topics/nvidia-gt-240-problem.208043/
Relevancy 14.62%

I remember some time ago I found a option which made my computer connect itself to the internet but now I cant find it.Help?
 

A:Have to manually connect to the internet on startup

Make and Model of computer? What Operating System are you using?
 

http://www.techspot.com/community/topics/have-to-manually-connect-to-the-internet-on-startup.207918/
Relevancy 12.04%

I recently just built a gaming PC with my friend I have installed all of the drivers for the GPU from the installation disk it came displays dark. Build. glitches goes then New problem? Monitor GPU with Windows has been updated fully also besides three updates that continue to fail They are just security updates they may or may not be the problem The PC runs fine and the display will show New Build. Monitor displays glitches then goes dark. GPU problem? clear and crisp for about half an hour until New Build. Monitor displays glitches then goes dark. GPU problem? glitches will start to appear in the screen and next the monitor will appear black The light is still on and the PC is still running whatever it was last I know this because it did it during a driver installation and after I waited an hour and then restarted the PC the driver install was done Often after I restart the PC nothing will show up at all If I wait awhile and get lucky it will boot up normal The glitches happen most often when I try to run a game The mentioned updates continue to fail and idk why I have ran a troubleshoot for the PC as well and the it says no driver can be found for the PCI Simple Communications Controller After I choose to search for the driver online or on my computer it says no driver found During a Windows Update failure I got another error message concerning my graphics driver saying a problem could ve occurred because a graphics driver is missing Yet the program GPU Tweak that was installed with the disk says that everything s up-to-date When I try to update manually it says the sam thing This computer was not expensive I can post exact specs when I can get back into it and maybe some pics Specs Not listed is a terabyte of memory blu-ray burner and and an msi Z -G Gaming motherboard I have a strong internet connection and am using a DVI port for the monitor I have ruled out the monitor as the problem Before I said the PC was NOT expensive I meant NOT cheap I spent around on the parts nbsp

A:New Build. Monitor displays glitches then goes dark. GPU problem?

Looking at the screen shot of GPU-Z it appears you are running a AMD Catalyst 13.8 BETA drivers. I would suggest downloading the latest drivers from AMD: AMD Catalyst Omega Drivers 14.12. Then go into your control panel and completely uninstall the amd catalyst from your computer. Once completed, you may need to reboot the computer. After reboot, install the newest drivers from the link I posted above. Do so and then try again to produce same error results. Let us know if it works or not so we can try other options, or resolve the issue.
 

http://www.techspot.com/community/topics/new-build-monitor-displays-glitches-then-goes-dark-gpu-problem.207947/
Relevancy 12.47%

Okay, this is very weird. when I connect to my wifi on my laptop the internet doesnt work. It says connected and everything. it says it has internet access. It just doesnt work. But if I connect my phone to the wifi and use USB tethering to my laptop it works. :/ Help please.
 

A:Wifi problem

Hey RenRoo.Have you tried a another browser? Does the wired connection to the router work? If yes, I would go into Device Manager, and click the + sign next to Network Adapters.Right click on the wireless adapter and select uninstall.Exit, reboot the system, allow the system to "find" the wireless adapter, then check and see if it will connect. If you still have the same problem, connect via your phone and in Device Manager, try to update the driver.
 

http://www.techspot.com/community/topics/wifi-problem.207956/
Relevancy 12.04%

I came home one day to find that my monitor was no longer displaying my PC via HDMI. After a lot of testing, I've found that the monitor works with other PCs via HDMI, and my PC works with other monitors via HDMI, but they don't work together. All I get is a black screen. I know that my PC's resolution is set to one that my monitor can display. I've tried several different cables. I have absolutely no idea what the issue might be, and I'm pretty much at my wit's end here. Any ideas?
 

A:Strangest display problem I've ever had

Have you tried different projection modes? Windows will remember set profiles for specific monitors. It is possible the the projection mode was turned off for the monitor, and will stay that way until the mode is changed.

For Windows 7 press "Windows Key + P" to bring up the projection menu.
 

http://www.techspot.com/community/topics/strangest-display-problem-ive-ever-had.207904/
Relevancy 18.92%

I have dsl high speed internet and I called them because it kept cutting out and they said it was our router because it was 5 years old so I got a new netgear r6100 dual band router (120 $) , our modem is about 2 months old the phone line coming into the house is new (new house) but the line going to the box on the road is old could that be the problem? when we first got the internet it was awesome then they upgraded the speed coming through the line and it slowly got more and more less stable now its cuts out all the time?
 

http://www.techspot.com/community/topics/dsl-connection-cuts-out-every-10-minutes.207847/
Relevancy 14.62%

Toshiba laptop. Internet at the bottom right says there is a connection available, but says the settings saved on this computer for the network do not match the requirements of the network. It has to be plugged in to the modem to access Internet. Speakers do not work. Ports do not work either. I had it in for repair and he thought it might be the motherboard, but he couldn't fix the other one and I got help with Broni on here and it works fine now. I am hoping someone on here can help me fix this one. It has no viruses; it's clean. Thanks!
 

A:Laptop cannot access the Internet unless it is hooked to the modem

Ok, the modem=>pc config working says networking is at least sane.

To get the modem=>router=>pc to work, the pc should not have ANY configuration data stored in the network adapter settings. Can you find and clear the network adapter for yourself?
 

http://www.techspot.com/community/topics/laptop-cannot-access-the-internet-unless-it-is-hooked-to-the-modem.207405/
Relevancy 12.04%

For quite some time now I have been having this problem where I can hear other people but they cannot hear me, the only thing they hear from me is my computer. So for example if I am on youtube watching a video, they would be able to hear what video I am watching, while at the same time they can't hear me at all when I talk. I have tried Microsoft sound recorder to see if that could here me, but still no luck. I then tried a video while using Microsoft sound recorder and it recorded that.

I have tried uninstalling all of my audio drivers and changing setting as what people suggest but still no luck.

I have never had luck in figuring out what the problem is so I have just used Skype on my phone but it has gotten to a point where that is just a hassle and very inconvenient.

Any help is appreciated!
Thanks!
 

http://www.techspot.com/community/topics/mic-problem-turtle-beach-x32.207696/
Relevancy 19.35%

Hello everybody, I'm having a problem with my wifi-connection, it is limited, can someone please help me
I'm using windows 8.1 Pro and here is the problem:

note that this only happens with that wifi network and only with my Laptop, my Laptop can connect with the other wifi networks and the other wifi networks can connect with that "Fiber Pagoda" networks
Here is the ipconfig/all says:

I've tried all the ways that I found the internet:
- reset modem
- set static ip
- uncheck ipv6 protocol
- reinstall windows
- renew ip:
When I renew ip, it said:

-reinstall my wifi-driver:
Here is my driver:

-update windows
but none of it can fix the problem
please, please, please help me !!!
 

A:Wi-Fi connection

Try changing the Wifi security setting in the modem. You should be able to access the setting by typing http://192.168.1.1 in your browser address bar. I had an HP laptop that was very particular about the security type. I believe it wouldn't access using WEP but would using WPA2.
 

http://www.techspot.com/community/topics/wi-fi-connection.207660/
Relevancy 14.62%

Is there any way of sharing hard drives/folder over the internet with the client side need to install anything.
I.e use add network location option in my computer
Or a client programme that is user friendly

The server side will need to run on my computer,
looked at FreeNas thats not an option,
Filezilla looks like it the best option server side of things but uses a client programe.

Im happy to run any programmes/OS's in a VM if that were needed.

Thanks in Advance
 

http://www.techspot.com/community/topics/sharing-hard-drive-over-internet-without-client-programes.207578/
Relevancy 14.62%

Hey guys, I was recently in the malware section, because my laptop had some problems and could not connect to the internet. Broni was very awesome and helped me clear my laptop up, but we still couldn't get it to connect to the internet. He advised me to come here for help.

I will link the previous thread, because there are some log files toward the end I think would be much more helpful than me explaining problems.

http://www.techspot.com/community/topics/infected-laptop.206911/page-2#post-1444892

Thank you so much for any help.
 

A:Trouble connecting to internet (Windows 8)

Can you try to re-install the WiFi driver?
 

http://www.techspot.com/community/topics/trouble-connecting-to-internet-windows-8.207500/
Relevancy 12.04%

Hello Yesterday I got a virus on an Acer Extensa laptop Said virus was turning on a fake antivirus whenever I opened a file which wanted me to pay a price for a quot cleanup quot I wasn t able to Acer Extensa 5235 booting problem turn anything on Luckily I managed to turn it off through msconfig and delete the virus files Right now however the laptop won t even turn on The Acer Extensa 5235 problem booting quot Acer quot screen goes on the flickers a few times in the upper left corner and the laptop resets I won t even get to a safe mode The notebook had minimal differences from the factory preset had Win Acer Extensa 5235 problem booting and worked until yesterday I have a OEM Win XP home CD at my disposal at the moment I have already tried Booting through BartPe and an iso image of Windows XP on an USB flashdisk To no avail I get to the BartPe layout but the BartPe file explorer shows no disks available Boot through the disk itself At first it didn t load with the error quot STOP X B xf d Xc X X quot which I was able to circumvent by transferring from a SCSI mode to IDE mode in BIOS When I installed Win XP however I had an error concerning a few uncopiable files described for example here - http forums penny-arcade com discussion cant-install-xp-from-any-disk-to-any-disk I skipped everything and the PC now resides in a quot minimal quot Win Xp preset With the former Win configuration of course absent I think I d be able to fix this if I found the MSCONFIG settings for the Windows I used before and which I mistakenly modified I probably turned off something that now blocks the system from starting Is it possible to do so through the new Windows Xp installation The former Win folder is untouched Win Xp runs from another folder Thank you very much for all help nbsp

A:Acer Extensa 5235 problem booting

I had to look up BartPE to see what it was but I think it's unlikely to save the day in your situation.

Assuming that your priority is to get Windows 7 back I'd first check that you have the Microsoft authorisation code for your copy. If it was pre-installed on the laptop there will be a hidden restore partition and you could try holding down the Alt key while tapping F10 to access it. Failing that option I'd download a Windows 7 SP1 ISO, burn it to disc, reinstall the OS and hope that there are no serious driver problems. Both options mean that everything you have installed and saved will be lost unless you have already made backups.
 

http://www.techspot.com/community/topics/acer-extensa-5235-problem-booting.207441/
Relevancy 15.05%

I have a toshiba laptop right at a year of having it, it will not allow me to get internet connection even though it shows its getting wifi or set up through the router.. Is this a virus or other issue
 

A:Toshiba Internet won't work

Moving this topic to appropriate forum.
 

http://www.techspot.com/community/topics/toshiba-internet-wont-work.207422/
Relevancy 15.05%

My toshiba will not get on the Internet Google will come up and search but everytime it says Internet error
 

A:Laptop Internet error

Need specific; try looking in the cmd-> enter eventvwr.msc
 

http://www.techspot.com/community/topics/laptop-internet-error.207423/
Relevancy 12.47%

Hi all,

I have an ECS mobo with 1 GB RAM. I'm going to add another 1 GB RAM. The current RAM is Kingston and another is Apacer. When adding the Apacer into RAM slot of the mobo, the computer doesn't show anything. I replaced the Kingston's slot with the Apacer but again the PC doesn't come up and doesn't show anything.
What is the problem please?
 

A:Problem when adding another RAM

What is the specific model of the motherboard?
 

http://www.techspot.com/community/topics/problem-when-adding-another-ram.207359/
Relevancy 12.47%

Hello,someone pls help me...I custom build my pc system specs are: mb asrock z97m anniversary,ram hyperx fury ddr3 1866mhz,cpu intel i5 4690k,psu chieftec navitas gmp 1000c-1000w....all parts are new just buy from store...and gigabyte gtx 690 used(think its culprit) and all is working on windows 8 x64 nvidia driver 344.75 whql!!!Now to probles....system boots fine,log in account(random system crash with black screen,can get back only with hard reset) windows works fine,can using net,watch youtube,listen to music....but when try to run some game,than immediate black screen crash with no error report,try furmark....the same crash after 1-5sec furmark render,cant even open geforce expeience...immediate crash!!!What a problem?Swap 690 with 680....everything works fine!igpu works fine!Try windows 7 x64....the same,but few times see error code 7 something about opengl and driver stop responding....but in windows 7 I can run furmark only on windowed 640x320!!PLS HELP ME!!!!
 

http://www.techspot.com/community/topics/problem-of-gtx-690.207148/
Relevancy 14.62%

I laptop My wirelessly to will the connect not internet have had my laptop for around a year and it has always connected to the internet both wirelessly and through the cable Suddenly for no apparent reason about a week ago it stopped working All that I had done was turn on my quot Guest Account quot and download Skype It worked for a few minutes after this and then stopped completely- if I hovered over the wireless connection on the bottom right of my screen there is a big red cross and it tells me that there are no wireless networks available in the range We have another laptop which we use from My laptop will not connect wirelessly to the internet the exact same location within the My laptop will not connect wirelessly to the internet house and this connects no problem it also finds another or so wireless networks in the neighbourhood I know that there is not a problem with my router modem as I can connect via my other computer I have not done anything to the laptop except the installation above- I tried uninstalling this and turning off the Guest Account but still no joy I looked at other posts on here and tried some of the things suggested but still no joy I thought I would try to be clever also and think I have actually made this worse so that it is now beyond repair I know with most computer based things uninstalling and reinstalling it can work tried this and have now uninstalled my wireless network cannot now find where it is to reinstall If you are able to give me suggestions to fix this please treat me as a novice as although I know some things about computers I really don t know enough to decipher some of the more technical terms Thanks in advance nbsp

A:My laptop will not connect wirelessly to the internet

bangj001 said:





I have had my laptop for around a year and it has always connected to the internet both wirelessly and through the cable. Suddenly, for no apparent reason, about a week ago it stopped working.

All that I had done was turn on my "Guest Account" and download Skype. It worked for a few minutes after this and then stopped completely- if I hovered over the wireless connection on the bottom right of my screen, there is a big red cross and it tells me that there are no wireless networks available in the range.

We have another laptop which we use from the exact same location within the house and this connects no problem, it also finds another 7 or so wireless networks in the neighbourhood.

I know that there is not a problem with my router/modem as I can connect via my other computer. I have not done anything to the laptop except the installation above- I tried uninstalling this and turning off the Guest Account but still no joy.

I looked at other posts on here and tried some of the things suggested but still no joy.... I thought I would try to be clever also and think I have actually made this worse so that it is now beyond repair!! I know with most computer based things, uninstalling and reinstalling it can work... tried this and have now uninstalled my wireless network...cannot now find where it is to reinstall!

If you are able to give me suggestions to fix this, please treat me as a novice as although I know some things about computers, I really don't know enough to decipher some of the more technical terms! Thanks in advanceClick to expand...

I assume you're using some sort of windows machine. Have you tried a system restore to a previous state when the OS used to work?
if not you should try that first by going to Programs>accesories>system tools> system re-store and select a time from when the laptop used to work fine.

Mm
 

http://www.techspot.com/community/topics/my-laptop-will-not-connect-wirelessly-to-the-internet.158976/
Relevancy 12.04%

I ran out of USB ports, so I went in for a powered USB hub.

One by one, all the USB ports went out of action, and then windows (XP) would not boot normally.

That was quite a scare.

I detached all devices attached to the USB ports and ran Device Cleaner (thanks to Lookin)

http://www.techspot.com/community/t...up-and-remove-old-usb-storage-drivers.145884/

The PC began to boot normally, and all but one USB came alive.

Any explanation?
 

http://www.techspot.com/community/topics/strange-problem-when-i-connected-a-powered-usb-hub.207055/
Relevancy 26.23%

Hi,

I am playing around with Server 2012. If I want to have a laptop configured for "at office use" with option to go on site, what would be the best way to do that in order to retain access to shared locations on server that is "at office"?

Should I create a standard windows account unrelated to my domain controller, and have them VPN regardless if they are in office or on site? Or is there a way to have a laptop configured for domain use, where it will still be functional (local computer use) on site outside of the office, even without internet connection (I know you can's VPN without it).

Thanks
 

A:Best way to set up local and remote user with Server 2012

Well this is kind of interesting. You can in fact use a domain laptop away from the local network as long as you have logged into int once on the domain so it can cache your password for future log ins. Now comes to the more difficult part of your question's. Accessing files remotely while not online, you can set up what is called offline files. Offline files will give you acess to your files away from domain network. So if you choose to do offline files any changes made to the file while away from the domain controller where you shares are set up will have to be synced once back on the domain network. So if you make changes to lets say docA while off domain network, once you get back to domain network you will have to sync offline files to the server to update any changes you have made. This set up would not require offsite network but can bring problems when syncing once you reconnect on domain. But now lets say you have the same shares and now you have multiple individials with the same access to the shares. Say you make changes to docA and the other person makes changes to docA while offiste. Once you both reconnect and sync to server you could have issues with data such as duplicate information or doc merging. VPN would be the best option for sure....
 

http://www.techspot.com/community/topics/best-way-to-set-up-local-and-remote-user-with-server-2012.206403/
Relevancy 12.47%

My usb mouse is connected, it's led is on, but it's not moving the cursor at all.
I tried unplugging and plugging it in every usb port I have but still not working.
Strangely keyboard 100% works and usb drive works too
Help me.....
I tried another mice that's 100% working on my other computers and they all won't work.
What should I do?
 

A:Mouse problem

I would have a look in 'Device Manager' at the line 'Mice and other pointing devices'
Click the small arrow to the left of that line, to get the next line to show, below it.
Right click on that, and choose either 'update driver' or 'Uninstall' and then reboot your pc, with the mouse connected, and Windows should install the driver for it again.
I'm assuming this is a Microsoft mouse, if another type it might need it's own driver which should have been supplied with it, but it would be very unusual not to work in Windows at all, whatever the maker.
 

http://www.techspot.com/community/topics/mouse-problem.206868/
Relevancy 12.47%

Hello..
I have problem with my LG Flatron L246WH monitor..
This is actually problem
Capacitors seems to be ok Pic 1 Pic 2
Any ideas??
 

http://www.techspot.com/community/topics/monitor-problem.206973/
Relevancy 15.05%

Hi I have also been experinsing these problems. I am a video game player as well and whenever I try to play on my laptop my internet disconnects. But all my other devices that use wifi work fine. Also there is nothing wrong with my computer because it works fine on other networks such as my schools. I recently moved and am now using a different internet provider ,centerylink. I think I have to change my modem channel but centurylinks website were you change modem settings is a scam. The website does not work and my parents think theres something wrong with my computer and are refusing to change internet service providers. So I am wondering how If I can change modem channels a different way.

Moderator note - This post removed from this thread: http://www.techspot.com/community/topics/internet-keeps-disconnecting-randomly.205710/#post-1439822 to avoid hijacking.
 

A:Internet disconnects

Hi, You might have another wifi signal very close to your house that is on 'your' channel, it happens.
You can only move your channel to one of three different frequencies, that is the lowest, the middle or the highest one. So say your current channel is 6, there is no point going to 7, it's still too close.
If the 'other' problem wifi channel near you is say '1' then you should try to go to the other end of the range.
You change your WiFi channel in your router, then your laptop will find it.
You don't need a website to do that, it's between your laptop and your router.
You make the changes through any web browser, and the details will probably be on the label of your router.
But this might not the problem, although it's a fairly easy one to 'fix' if it is.
 

http://www.techspot.com/community/topics/internet-disconnects.206830/
Relevancy 25.37%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?
 

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.
 

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 14.62%

The (Tp internet connect to 740n) router link via Unable to router worked fine in the past until recently my ISP had a break in the cable line and repaired it Now I am unable to connect to the internet If Unable to connect to internet via router (Tp link 740n) I connect the ISP s LAN cable directly to PC windows and do the following steps Control panel gt View network stats and tasks Setup a new connection or network gt Connect to the internet gt Next Broadband PPPOE gt Next Type in username password gt Connect Internet works fine This means there is no problem with the internet connection However if I connect the ISP s LAN cable to the quot blue quot port of the router and the short LAN cable to my PC then do the following steps Open http tplinklogin net It shows me router config page Click Quick setup gt Next Select PPPoE gt Next Type in username password gt Next Leave the Wireless Page untouched gt Next Click Reboot Wait till router reboots It does not work the router page shows quot Connecting quot but does not connect at all Here s the router log TL-WR N System Log Time - - s H-Ver WR N v S-Ver Build Rel n L M W PPPoE W M G st day OTHER INFO User clear system log st day PPP NOTICE PPPoE start connecting st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x nbsp

A:Unable to connect to internet via router (Tp link 740n)

Please help me
 

http://www.techspot.com/community/topics/unable-to-connect-to-internet-via-router-tp-link-740n.206843/
Relevancy 15.05%

Hi there!

I recently have come across an issue where my internet randomly disconnects, mostly while on Skype or downloading video games and cannot figure out the issue at all. It usually downloads fine for about 1 minute and then disconnects completely. 0kbps and internet drops on my computer alone.

I'm kinda new to tech forums so if you guys need any information let me know.
 

A:Internet keeps disconnecting randomly

Hi, I had this problem a few years ago, which was fixed by buying a new USB wireless dongle.
But if you are using wireless connection to the router, try an ethercable instead and see if the same thing happens.
Are you using a laptop? If so it could be faulty wireless 802.11 board.
If you are using a USB wireless adapter, it could that the pc is turning off the power to the USB ports to 'save power', that can be changed if required.
 

http://www.techspot.com/community/topics/internet-keeps-disconnecting-randomly.205710/
Relevancy 12.04%

Hi,

if anyone can help ill be really thankful.
pc 1, 2 runnging win7 ultimate x64

1 adsl modem, 1 tp-link router, 2 computers (pc1, pc2).

ADSL(modem) - LAN1 - PC1 , LAN2 - Tp-link
Tp-link - LAN1 - PC2, WAN - ADSL(modem)

Everything is working, but computers cant see each other in HomeGroup.
Tried various methods but nothing work.

So my question is how to set HomeGroup for those 2 computers. Any suggestions?
Thank you
 

A:Win7 Homegroup problem

@Moirax . I can't answer your question, but your mention of Homegroup makes me ask what is it for? To avoid hijacking this thread,I'll PM you.
 

http://www.techspot.com/community/topics/win7-homegroup-problem.206524/
Relevancy 12.47%

Hi,

I pair my Plantronics Calisto PLT Headset to my Desktop Computer (Windows 7 x64), and it showed that everything is OK, but when I tried to use it, it didn't work.
When I press icon of sound on the taskbar and I go to Playback or Recording there is there Bluetooth Hands-free Audio but is Disconnected, and I don't have any idea how to connect this and make to work.
Can someone help me to solve this problem? I will really appreciate any help.

P.S.
I did everything like supposed to be. I attached few images to show my situation.






 

A:Bluetooth Problem

Hi,
Yesterday I bought USB BT400 Adapter.
I started everything from beginning and there is exactly the same situation. Nothing changed. If you look to the picture, everything is pair and installed and when I ask them, they said that was something wrong with Windows configuration (not 100%).
Point is that they didn't have any clue what is wrong.
P.S.
I didn't mention that before when I installed USB Bluetooth Adapter, and I pair my device in the Playback and Recording devices when I tried to connect it worked for very short time and after this somehow disconnected by itself.
I don't know if I explain well what's happened, but if you want to ask something to make clear, please don't hesitate.
 

http://www.techspot.com/community/topics/bluetooth-problem.206560/
Relevancy 15.05%

My internet will just crash every minutes to sometimes seconds and the crashing only last about 10 seconds. It really gets annoying. its been happening for a couple months now and I have no idea how to fix it. I'm using cable and it seems to only happen to me in the house my brothers laptop isn't affected by the crashing, if anybody knows how to fix the problem please tell me.
EDIT oh and it happens randomly like say its could crash one day then it wont crash the next day. Or it could crash for one hour and not crash for the next 3 hours.
 

A:Internet Crashing

I'm using cable and it seems to only happen to me in the house my brothers laptop isn't affected by the crashing,Click to expand...

I guess you are saying that at your house, your Internet connection has problems but your brother's laptop does not.
Crashing(what: your system versus your browser) or Disconnecting?
 

http://www.techspot.com/community/topics/internet-crashing.206507/
Relevancy 12.04%

Hi. New guy here. I'm an oldtimer...cut my teeth on tubes and ended up as a 2-way radio and power plant tech. Retired at that point and didn't keep up much with the digital age. I have a compaq fp5315 computer monitor with an audio problem....either lots of noise when volume is normal, or at times no noise, but very low volume. Can't find any scematics and don't want to tear it apart until I know a little more about where to look. Is the audio board in the monitor or in the computer tower? The connecting cord checks ok and the usual plug-wiggling doesn't make any difference. If the audio board is in the tower, is the audio coming from the tower a normal low-impedance speaker feed or like a 600 ohm? Don't think it's just a simple speaker problembecause it has two speakers and both sound the same and the odds are that both wouldn't be bad.
 

http://www.techspot.com/community/topics/monitor-problem-with-compaq-fp5315.206548/
Relevancy 15.48%

Hello techspot community I m new here and I apologize in advance if I ve done something incorrectly using internet my LAN In short any computer I access via LAN that is connected directly to my router uses up internet data For instance if I watch a movie stored on a computer connected directly to my router though it is being streamed through my LAN my net usage gets eaten up quickly from it This also happens with software such as teamviewer and splashtop even when set to accept LAN exclusively Whats odd is even when I disconnect my modem from my router and watch a movie my router still says data is being passed solely through the internet and a lot of it So I m LAN using my internet almost certain the issue is with the router but not entirely sure what Interesting enough when I access a computer that is connected to my router by wireless from a wireless device there isn t any issues consuming my internet when using the LAN I find this to be a huge problem as on the first of this month I decided to watch some HD movies over my LAN and it used up over gigabytes of data which I confirmed from my ISP I have to pay for that usage even though I wasn t actually using the internet This problem is quite new I m not sure exactly when it started but I haven t had this issue for the first months I owned this router it must have been something I changed in the router options but I haven t yet found what it could be Addition info ASUS RT-N U wireless router ASUS router is bridged from a Hitron modem Win Ult OS What I ve already tried Monitored my internet traffic to conclude the problem Contacted my ISP everyone was confused and no one was able to help Reformatted a single computer connected directly to my router so see if it was software related didn t help Went through router options intensely without success Tried multiple computers directly connected to the router and issue persists with newly connected computers Upgraded my modem to see if that was an issue it wasn t Updated router firmware to the latest didn t help Gone through the network sharing options from OS thoroughly Any suggestions regarding this is much appreciated Though already implied I want to ensure the understanding that even file transfers from one computer to another on my own network is using my internet data for some odd reason nbsp

A:LAN using my internet

The ONLY way I can think of this happening is if you are using some type of media server that you are allowing web access to your library with AND then you are connecting to that service online to view your local media. Like Plex Media Server will allow you to do that if you set it up to, I'm sure there are other softwares that do that as well. But that is not default behavior.
 

http://www.techspot.com/community/topics/lan-using-my-internet.206003/
Relevancy 12.47%

I have just bought new ram to try and speed up my machine but when I put it in and rebooted I got a long beep followed by two short beep, then it continues to beep twice
Looked this up and it says it's a problem with the first 64k or Ram so I gave up, took the new RAM out and rebooted with exactly the same setup I had originally. Still get the beeps and the machine won't startup! It's exactly as it was before I put the new RAM in but no joy!
Help! I don't know what I should do

The motherboard is H-AIRA-RS780L-uATX
It has two slots
Original RAM is 2gb pc3 10600U
New RAM (now not in the machine) was 2gb 10600u

help!
 

A:RAM problem

Try clearing the cmos. Plus make sure when you install the original ram . It clicks in place. Hope this helps you out.
 

http://www.techspot.com/community/topics/ram-problem.206335/
Relevancy 12.47%

Hello all,

My machine is running XP professional. My problem is about the CD/DVD drive. In normal state, when it's empty, it can be opened and closed just as normal. But for most of the CDes or DVDes, one problem will occur.
The problem is, first that CD or DVD will not be read/recognized. Then the CD/DVD drive is no longer available in my computer window like that is not recognized as well. And also in deice manage's list, there isn't any CD/DVD drive item!
In those situations, every time I need to restart the PC one or several times and try to eject the cd drive and put out that CD/DVD and start the machine again. Then the CD drive will return again!

How to fix that problem please?
 

A:My problem with my cd/dvd drive

Hi, It could be the DVD's firmware is out of date or corrupted in some way (unlikely though.)
If the DVD drive shows in 'Device manager' at first boot, with no disc in, try uninstalling it (right click on the drive) then reboot the pc, it should re-discover it.
Also remove both the power plug and the data plug from the back of the DVD drive and plug them back in again just to remake the connections.
Might be worth checking the connections from the ribbons to the motherboard as well.
 

http://www.techspot.com/community/topics/my-problem-with-my-cd-dvd-drive.206353/