Windows Support Forum

Unknown language display of menus for English language setup!

Q: Unknown language display of menus for English language setup!

Can anyone help me with this problem?

Relevancy 100%
Preferred Solution: Unknown language display of menus for English language setup!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 24.51%

I am working on a Toshiba Satellite with Insyde H2O bios. It says to use F2 for setup and F12 for boot manager.

I've tried all the function keys, as well as esc and del and they only get me to Windows Boot Manager. (This includes F2.)

The machine has Vista that stops loading when it gets to the network drivers. Could a corrupt BIOS be the cause? If I download a new BIOS can I install it from the command prompt?

If the BIOS is still OK are there other ways to get into setup?

(Meanwhile F2 works just fine on my Dell Lattitude)
 

A:Can't get into BIOS setup utility

Try using a USB keyboard...

"Could a corrupt BIOS be the cause?"

I don't think you would get that far in the boot process if the bios were corrupt
 

http://www.techspot.com/community/topics/cant-get-into-bios-setup-utility.178271/
Relevancy 24.51%

Motherboard GA-X79-UD3 socket 2011
CPU Intel Core i7-3820 Sandy Bridge-E Quad-Core 3.6GHz
PSU 850 watt
ram 16 GB
Hard drive 256 GB ssd
at this time I have GPU is GTX 550tix2
 

A:Best card for my setup

Budget? What do you want this card for, I,e, gaming, video rendering, etc.? As for "best" there are probably several options open to you.
 

http://www.techspot.com/community/topics/best-card-for-my-setup.216146/
Relevancy 21.07%

My Friend has a HP Pavilion DV2000 Laptop. His display isn't work. Suddenly display gone. But I thought it could be Display problem not a VGA. So, i tried to connect an external monitor and used Shortcut keys to change the display. I pressed fu + F1 or Fu + F2 or Fu + F3 or Fu + F4 up-to F12. But no result.
I couldn't check whether it's a Display or VGA card problem. IS there any other way to check it. in addition to these is there any other combination keys to Change the display to an external monitor. I'm unable to check whether i get login or not. if I can login then i can use Windows Key + P. Then i can select mode. But I'm Unable to anything here. Please help me to find the problem and i have to take it to repairing shop.
Thanks in Advanced
 

A:Change display of laptop to external monitor

It should be the Fn + the key that shows a monitor symbol. If it still doesn't display, the motherboard video processor has failed, and not the LCD Panel
 

http://www.techspot.com/community/topics/change-display-of-laptop-to-external-monitor.168817/
Relevancy 21.07%

Hello,

I have been using the same set up for just over a year now and yesterday my monitor (which is just a TV with a HDMI port) stopped receiving signal.

I can boot up the pc and get the BIOS, which I can go into and see everything fine, as well as the windows loading icon but when it would normally go to the log in screen I get nothing.

I can however plug in an extra monitor (an actual Samsung monitor) with a VGA cable and it all works fine and on top of that if I connect the TV at the same time it works perfectly fine as a second monitor.

However if I try to turn off the VGA monitor and just use the HDMI TV then I get no video signal again.

No idea how to get my main TV monitor working again. Totally stumped.

OS: Windows 8.1
Processor: Intel Core i5-4570 CPU @ 3.20GHz
RAM: 8.00GB
Video Card: GeForce GT 620
MOBO: Asus Ranger VII
PSU: Corsair 500w
Monitor: Technika 22" HDMI + Samsung SyncMaster 2032 VGA
 

http://www.techspot.com/community/topics/monitor-no-video-found-when-main-display.215571/
Relevancy 20.64%

Infinity displays are all the rage among notebook buyers these days. Dell's XPS 13 (2015) was an excellent example of what's possible when it launched earlier this year and now, they're bringing the gorgeous screen to its bigger brother. ...

Read more
 

A:Dell's revised XPS 15 includes gorgeous Infinity display, Windows 10

What's an Infinity screen?... Short answers please, I'm not interested enough to Google it.
 

http://www.techspot.com/community/topics/dells-revised-xps-15-includes-gorgeous-infinity-display-windows-10.213699/
Relevancy 21.93%

In dxdiag option and in Display option all 3 acceleration options are not available in my pc. But I had installed the drivers and hardware for graphics then too it showing not available. Can anybody tell me how can I enable all those 3 options. I have Standard VGA Graphics Adaper.
Here is screenshot for reference -

 

A:Display Drivers Not Available

And Only Because Of That I am not able to open any game or sofware which requires display graphics. Any suggestions are most welcomed.
 

http://www.techspot.com/community/topics/display-drivers-not-available.214649/
Relevancy 21.07%

Up until this point, Asus has been solely focused on producing G-Sync monitors for the gamers out there with Nvidia graphics cards. However this is set to change, with the company preparing to release their first FreeSync monitor, the MG279Q. ...

Read more
 

A:Asus joins the FreeSync market with 1440p, 144 Hz IPS display

Finally a good IPS monitor. I got tired of seeing so many TN ones.
 

http://www.techspot.com/community/topics/asus-joins-the-freesync-market-with-1440p-144-hz-ips-display.211255/
Relevancy 21.5%

I have uploaded a video of my laptop to better show the problem:

I am thinking something is wrong with a connection or some cable just don't know which. Never fixed a laptop. I broke the panel before I figured out the screws were hidden behind tiny black covers. Also broke the metallic part of the screen on the right side but I guess I will crazy glue it somehow. My most important issue is the flickering.

If anyone knows how to fix this issue please let me know I would really appreciate it.

At certain position the screen doesn't flicker, mostly if it's set back at a greater than 90 degree angle.
 

A:Laptop display flickers

It's sensible to check the connectors to the screen but unless you find a video of how to get inside your particular laptop and study it you are highly likely to break other pieces too. I worked out how to take mine apart thanks to Google but although I was careful I still broke a connector. Putting that right took me ages.
 

http://www.techspot.com/community/topics/laptop-display-flickers.213067/
Relevancy 22.79%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.
 

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 21.5%

Hello,

I need some professional help.
My computer:
AMD a10
4fb RAM
R9270x BY XFX
....
NOW, without the graphics card the computer runs fine. When I install the ddriver's for the r9 it will work, but eventually the display driver stopped working makes its way back.

I've ran all diagnostics on the memory and checked temperstures which all turned out to be fine.

I sent the card into xfx and they returned it saying it's fine.

WTF DO I DO MATES. I think it's the card....but that's just me.
 

http://www.techspot.com/community/topics/amd-and-display-driver-issue.212301/
Relevancy 21.93%

I could use some advice. My second monitor just died, and I would like to find a replacement with a few specific features.

27 inch
Adjustable White Point
As low as possible wattage

As I understand it, having a white point that is adjustable separately from brightness and temperature controls provides a better way to dim the white without dimming other colors. If I am not understanding this right, please correct me. The reason for looking into this is because of my eyes being sensitive to light. If I could, I would replace all white that comes through my monitor with a light tan. That's how bad it is. So, if there is a way I can better adjust how bright the white is, I'll probably take it.

The low power I want for reduced heat. With two screens this size, heat is obviously a problem. So far, I have only found that reducing wattage will have a noticeable decrease in heat. If there is something else, feel free to clue me in.

Thanks all!
 

http://www.techspot.com/community/topics/choosing-appropriate-display.212194/
Relevancy 24.08%

Okay so I am having an issue working out if my case will be able to hold my motherboard and graphics card Case Details Available Color Black Materials Steel body plastic Dimension x x mm x x inch (I Computer Building my First setup) changed W x H x D Net Weight kg lbs M B Type Micro-ATX ATX quot Drive Bays exposed quot Drive Bays exposed hidden quot Drive Bays hidden I O Panel USB x int USB x Mic x Audio x supports AC HD Audio Expansion Slots Cooling System Front mm fan x optional or mm fan x Building First Computer (I changed my setup) optional Rear mm black fan x pre-installed Side left mm or mm fan x optional Side right mm fan x optional Building First Computer (I changed my setup) Power Supply Type Standard ATX PS EPS V optional Maximum Compatibility VGA card length mm inch with HDD cage CPU cooler height mm inch Now Ill list my other parts I have They should Building First Computer (I changed my setup) also be links if they are not links just search the name WD quot Green TB WD EZRX SATA M RPM HDD Patriot Signature GB Kit Gx DDR - - PSD G KH Samsung SATA x Black DVD RW Gigabyte N - GI N SL- GL DDR GT PCI-E VGA Card Intel BX G Pentium G GHz MB LGA ASRock H M Anniversary Motherboard nbsp

A:Building First Computer (I changed my setup)

From the case details you have supplied (Motherboard type: Micro ATX or ATX and maximum video card length of 320mm) you are well within the parameters of having everything fit.
ASRock H97M motherboard is a Micro ATX board.
Gigabyte N730-2GI video card is 185mm in length.
 

http://www.techspot.com/community/topics/building-first-computer-i-changed-my-setup.210947/
Relevancy 21.07%

hello techspot, I keep getting this error when I play games in my computre. what should I do to fix this error?
 

A:Display driver stopped responding and has recovered

I get this error every once and a while. Updating your GPU drivers usually solves the issue. Do you know what GPU you are running? Post your full system specs below and then we can go from there.
 

http://www.techspot.com/community/topics/display-driver-stopped-responding-and-has-recovered.204745/
Relevancy 24.08%

Hi, Could anyone tell me any ideas on trying to get my usb device to work again. Not recognizing on my computer. Went into device managers and can see unknown device. I have tried uninstalled it and pluged it back in but all it says is successful installed unknown device. The computer doesnt even know what it is. Is it possible to try and install a driver for it and tell it that its a usb device?

Thank you
Mitch
 

A:Sandisk Cruzer unknown device

Sometimes the drives just die. This shouldn't be a driver issue, do other flash drives work in the computer? Have you tried this drive in a different computer?

You could open up disk management and see if you can delete the partition and create a new one, or simply format the existing one as NTFS or exfat. WARNING: Doing this will cause you to lose any data you may have on the drive.
 

http://www.techspot.com/community/topics/sandisk-cruzer-unknown-device.209278/
Relevancy 20.64%

Acer announced two new gaming-grade 27-inch monitors at the Consumer Electronics Show last month. The XB270HU garnered the most media attention thanks to its IPS panel and Nvidia G-Sync technology. What Acer neglected to mention at the time, however, was...

Read more
 

A:Acer's 27-inch XG270HU display will ship with FreeSync support

Those bezels are awesome! I wonder how much it'll go for though...
 

http://www.techspot.com/community/topics/acers-27-inch-xg270hu-display-will-ship-with-freesync-support.208917/
Relevancy 23.22%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

http://www.techspot.com/community/topics/freeagent-1tb-external-hard-stopped-working-unknown-not-initialized.208828/
Relevancy 21.5%

I came home one day to find that my monitor was no longer displaying my PC via HDMI. After a lot of testing, I've found that the monitor works with other PCs via HDMI, and my PC works with other monitors via HDMI, but they don't work together. All I get is a black screen. I know that my PC's resolution is set to one that my monitor can display. I've tried several different cables. I have absolutely no idea what the issue might be, and I'm pretty much at my wit's end here. Any ideas?
 

A:Strangest display problem I've ever had

Have you tried different projection modes? Windows will remember set profiles for specific monitors. It is possible the the projection mode was turned off for the monitor, and will stay that way until the mode is changed.

For Windows 7 press "Windows Key + P" to bring up the projection menu.
 

http://www.techspot.com/community/topics/strangest-display-problem-ive-ever-had.207904/
Relevancy 21.5%

Hello,

I remote into my home PC from work using the Chrome Remote Desktop tool. It works well. The problem is the screen resolution. The monitor I use at work isn't the same as the one on my home PC. This causes the resolution to be a little blurry and images to be slightly small.

When I disabled my monitor completely at home, the resolution was clear and it worked well. I just unplugged the monitor from my PC. Is there a way to completely disable a monitors input without having to physically disconnect it from the PC? I've tried disabling it in the Device Manager and that didn't do the trick. Any suggestions?

Thanks,

Speck
 

A:Disable Display when remoted into a PC

HMM; every hacker would just love such a solution. Don't think this should be pursued.
 

http://www.techspot.com/community/topics/disable-display-when-remoted-into-a-pc.207501/
Relevancy 24.51%

Before I say anything else, I am very new to building a computer. Ive never built one in my life. I am curious if the setup I have to far will work! I am trying to look for pretty cheap but good options for parts. So far I have a case, processor, and GPU in mind. I need ideas for the motherboard especially. I dont know how to tell if everything would work correctly, so if something would be incompatible, could you tell me?

So far I have

GPU: Nvidia GTX 760
CPU: Intel Core i7-3770k
Case: NZXT Phantom 240 Mid Tower
Ram:
Motherboard:
Hard-Drive: Seagate Barracuda 2TB HDD
Power Supply:
DVD Drive:
Operating System: Windows 7 64 Bit
Monitor:

Would there be anything else I need? Also what is thermal compound and Heatsink? Are these required for my setup? Please tell me if there is anything wrong with this so far and what items I should use for the unfilled spaces! Thank you all so much!
 

http://www.techspot.com/community/topics/will-this-setup-work.207722/
Relevancy 24.08%

I am trying to set up my Windows Xp computer as a VPN server I have taken the initial steps I get to the Accept Xp setup VPN hanging server Windows incoming connections screen and click okay The computer hangs for about a minute or so and then comes up with the following message Incoming connections depend on Routing and Remote access Windows Xp VPN server setup hanging service which was unable to start For more information check the system event log I presumed I had to go to control panel performance and maintenance Administrative Tools Event viewer I have already made sure that Routing and Remote access are enabled as well as Telephony I could not find Netbios in the services list and don t know where to Windows Xp VPN server setup hanging look for it Also when I try to start Routing and Remote access service manually I get the following message Windows could not start Routing and Remote access on local computer For more information review the System Event Log If this is a non-Microsoft service contact the service vendor and refer to the service specific error code- Can some one give me a step by step walk through of how to resolve this issue so I can connect to that computer from work over the internet nbsp

http://www.techspot.com/community/topics/windows-xp-vpn-server-setup-hanging.207658/
Relevancy 21.93%

Getting rid of emi on screen when using vga input?
 

http://www.techspot.com/community/topics/vga-display.207510/
Relevancy 21.5%

I run two displays. When I got up this morning, one of them is on but black. When trying to adjust my display settings, it comes on briefly (maybe 3 seconds) and goes right back off again.

System specs are as follows:

Operating System
Windows 7 Home Premium 64-bit SP1
CPU
AMD Athlon II X2 255 45 °C
Regor 45nm Technology
RAM
4.00GB Dual-Channel DDR3 @ 535MHz (7-7-7-20)
Motherboard
eMachines EL1352 (CPU 1) 49 °C
Graphics
VE205 ([email protected])
VE205 ([email protected])
256MB NVIDIA GeForce 6150SE nForce 430 (Acer Incorporated [ALI])
Storage
465GB Western Digital WDC WD50 00AAKS-22V1A SCSI Disk Device (SATA) 48 °C
Optical Drives
ATAPI DVD A DH16ABSH SCSI CdRom Device
Audio
USB Audio Device

Using Sabrent USB-DH88 USB Display Adapter also

I have checked all drivers and windows shows they are up to date. Both displays were fine as of about 1 AM this morning, and to my knowledge no updates or downloads were done during this time.

Any help would be appreciated; I work from home and having dual monitors is almost critical.
 

A:2nd display black screen

Try changing cables first, by some chance the cable has gone bad.

Sounds like it could be a lighting issue within the monitor. If it is a backlight issue, the monitor will still be displaying an image. You will not be able to see the image without some kind of lighting. If you can use a flashlight to expose the image, you would at least know it is a backlighting issue. I've been able to use this technique on phones as well as monitors.
 

http://www.techspot.com/community/topics/2nd-display-black-screen.207214/
Relevancy 24.51%

This is my current setup and am wondering if there's anything that can be improved.
primary hard drive 210GB Samsung SSD
secondary hard drive 931 GB Western Digital
8 GB DDR 3 dual channel memory
2TB Western Digital Passport external hard drive
Intel i5 2500K processor (not overclocked)
After running Winaero WEI tool I was supprised to see my primary hard drive is the bottle neck as it's SSD. Is there a way I can tell that SSD is primary, and not the old hard drive?


I run Windows 8.1 as main computer, then with VMware I run Windows 7 from secondary hard drive (all of its files are on secondary hard drive).

I noticed with the VM running some programs take a while to load the first time. For example Maple and Photoshop take 10 seconds, but if they are closed and open again then they take 2 seconds to open. Also with the VM and Firefox running 75% of memory is used. Does this mean I need more RAM?
 

A:Best setup with hardware

All that means is drive as far as windows is concerned is slower than the graphics card, memory ,and processor is. that means nothing. u'r computer is fine.
 

http://www.techspot.com/community/topics/best-setup-with-hardware.206940/
Relevancy 21.5%

I have been looking around and cant find a cut and dry answer to my problem.

What I'm looking to do I set up 6 monitors on 2 gtx 980's. My question is if its possible to have 3 monitors running in landscape as well as 3d and the other 3 as separate workspaces. Or can you only get 3 total monitors to work with nvidia 3d. And it gets more complicated when SLI comes into the picture since I would like to maximize my cards. But correct me if I'm wrong, SLI essentially turns my 2 cards into 1 not allowing me to utalize all the video ports on the 2nd card. Meaning I won't even be able to accommodate 6 monitors? I may just have to do without SLI.

So again. 3 monitors in surround 3d. 3 monitors not inside the 3d or surround environment. Off of 2 Gtx 980's. Possible? If not is there a way to accomplish this with other hardware.

Thanks for your time. SF
 

http://www.techspot.com/community/topics/6-monitor-display-without-sacrificing-3d.207179/
Relevancy 24.51%

A few months ago I thought I got a great deal on a Dell Precision T with dual quad GHz processor and MB of RAM The Raid Of Setup Getting Out Need Help upgradable to over MB It also came with GB hard drives but before I figured out that the second drive was just a data recorder set up in a RAID formation in order to safely keep sensitive data safer by duplicating it on a second drive Well the second hard drive went out and I had to re- install Windows on the first drive and I thought everything would be allright but then Need Help Getting Out Of The Raid Setup the first drive went out also I have choices in the bios to change this setup RAID Auto Detect AHCI RAID Autodetect ATA or RAID On Obviously I want the RAID off but it looks like I have to reformat my hard drives to make that happen and I don t know how Can someone please help me fix my computer back to normal With this system I ought to have some serious power put together right I already have an gb new solid state drive but I don t want to mess things up before I put my operating system on the solid state for quick start ups and then add a couple of large hard drives for my large data Also upgrading the video card Can someone help me straighten this mess out because I am afraid I may need a certain format to keep this from happening again and I am in uncharted waters nbsp

A:Need Help Getting Out Of The Raid Setup

If u are only going to have one drive for the OS u need the raid turned off. just make sure to install programs on the other D: drive.
 

http://www.techspot.com/community/topics/need-help-getting-out-of-the-raid-setup.206492/
Relevancy 21.5%

I usually connect the vga cable from my monitor to the port on my gpu,but for some reason it doesn't display anything now.

I tried to locate the source of the problem by doing these

1) Connected the vga cable from my laptop to the monitor, and it displays the laptop's content just fine so the monitor/cable isn't the issue.

2)Connected the cable to the vga port on my samsung smart tv and to the slot on my gpu and my desktop boots and functions just fine.

3) I opened up my cpu cabinet and dusted the ram and the video card and put everything back in place but that didn't help either.

I don't have a DVI cable with me so I can't check if that works and I don't have another similar monitor either I can test it on other than my tv.

Video card: AMD HD6770

Monitor Samsung 23'S22B series
 

A:Monitor powers up, but does not display

Is the port you're trying to get video out of active? It might be turned "off." Just a thought....

Mike
 

http://www.techspot.com/community/topics/monitor-powers-up-but-does-not-display.202749/
Relevancy 22.79%

I have a sony SD Card 16gb class 4 card. I did use the card for almost 3 months, when I tried to use it now, I am not able to access the card,





I tried recovery softwares like recova etc to recover the file, but I was not able to recover even a single byte.

I have many importants files in the CARD, PLEASE HELP ME...,.

Thanks
 

A:Data recovery SD Card not accessible, says incorrect function showing unknown format

I think >>this thread<< could help you out . He seems to have the same problem.
 

http://www.techspot.com/community/topics/data-recovery-sd-card-not-accessible-says-incorrect-function-showing-unknown-format.201611/
Relevancy 24.08%

I bought a 250 GB Samsung Evo SSD 840 for my desktop (850 isn't available in Canada yet). I'm running Windows 7 but am considering upgrading to Windows 8 or Ubuntu (or dualboot/vmware). My work is technical and to keep up with the times I am considering Windows 8, though I don't have a touchscreen. I am not sure the kind of configuration to use and am open to ideas. The current hard drive I have is a slow 1TB one. I was planning on setting up the SSD as a cache.

EDIT: my motherboard is Asus p8z68-v le
 

A:Setup with 1TB harddrive and fast 250GB SSD

I would not recommend setting up a cache at all with that large capacity SSD. Usually people cache with 64GB SSDs, but in your case, you might as well just migrate data to the SSD and use the HDD for bulk storage (large files).
 

http://www.techspot.com/community/topics/setup-with-1tb-harddrive-and-fast-250gb-ssd.204009/
Relevancy 21.07%

The video is 1 min and 14 sec, yet only the couple first seconds is enough to understand the problem. what could be the problem for?

as you can see, half of the screen display colors correctly, the other half, the colors and texts and smudged, they are there but smudged and not applicable to read or view
 

A:LG G2 IPS display weird problem - video for explanation

Can you still RMA it, or did you do something that is not covered by the warranty?
 

http://www.techspot.com/community/topics/lg-g2-ips-display-weird-problem-video-for-explanation.203474/
Relevancy 21.5%

I want to record from a webcam, mounted on a vehicle.

I need to use 2 displays, 1 for the camera fullscreen 7? display (HeadsUp), and the other displaying the software controls.

Any suggestions for the hardware/software?

Mac OS preferred but can go with PC
 

http://www.techspot.com/community/topics/two-display-webcam-recording.203677/
Relevancy 21.07%

Ok I m not the best and building computers and am very new at it My fresh build will boot but display absolutely nothing on the it like except everything Fresh display all powers at should build, no on monitor monitor by nothing I mean it won t even go to bios or turn the power light from standby to on This build will boot up all fans will run with no problems including cpu and video card fans and everything will shut Fresh build, everything powers like it should except no display at all on monitor off by holding down the power button properly Also I have not gotten any light or beep codes Here is what I have asus m a motherboard amd fx -core processor black edition asus gtx ti direct cu video card ddr gb Fresh build, everything powers like it should except no display at all on monitor x gb MHz dual corsair vengeance ram watt xion xio power supply sata tb barracuda hard drive dvd cd - writable drive cm storm scout case I have tried trouble shooting programs for the motherboard and video card with no results I have tried resetting the rtc ram I have double checked the power plugs are plugged in properly and making a proper circuit I have taken everything out except the motherboard cpu cpu fan and power supply and still gotten no beeps I have tried changing how the stupid speaker wire connects connecting incorrectly according to the manual and still no freaking beeps I have tried using hdmi and vga cords connected to my tv that supports pc s and a monitor nothing worked cord wise but my old pc worked like a dream when connected to them when talking to tech support for the motherboard they helped me check that it wasn t a grounding issue I have talked to all my pc buddies called tech support and no one can tell me anything i haven t tried or that has worked I have no idea what is wrong I need help I have spent the last two day all day working on this with no clue what is happening nbsp

A:Fresh build, everything powers like it should except no display at all on monitor

do you have the monitor cable plugged into the GPU or MOBO?
 

http://www.techspot.com/community/topics/fresh-build-everything-powers-like-it-should-except-no-display-at-all-on-monitor.178244/
Relevancy 21.5%

When I power on my Toshiba equium a200-151, the screen lights up but no display at all - even though there is loading activity. I rigged up to my PC monitor and everything is fine - see bios and windows loading etc. Borrowed a spare compatible working screen but same problem. I'm not 100% sure if its the inverter or the ribbon connector - any ideas before I buy a new inverter? Thanks for looking.
 

A:Lcd lights at power on but no display

I would say that the video cable (ribbon cable) is bad based on what you have tried so far. This cable goes from the motherboard to the LCD display. Did you use the old inverter off the suspect Toshiba when you tried the compatible spare LCD panel?
 

http://www.techspot.com/community/topics/lcd-lights-at-power-on-but-no-display.203111/
Relevancy 22.79%

I have networked PCs before many times successfully so this is not my first time trying to network PCs in a home environment Though I m wondering if Windows is part of the problem I would have thought that for sure until one of the name credentials bad password? user with unknown even correct failure: or "Logon new laptops running W would not connect to any of the other three PCs Laptops running W Yet these other three W PCs Laptops CAN connect to this laptop Then it gets a little more "Logon failure: unknown user name or bad password? even with correct credentials interesting this same laptop that couldn t connect to those three W PCs Laptops CAN connect to a Windows desktop and a XP Laptop and those two can also connect back to it without issue It s almost like my network is divided in half and only half can talk to each other But then when I thought it couldn t get any more interesting I realized the first three W PCs Laptops can talk to the others it s just that the others W Laptop W Desktop XP Laptop can t talk back to them without getting the error quot Logon failure unknown user name or bad password even though the username and password are correct I don t fully understand this error because on the surface it s just WRONG My username and password are correct but it appears something somewhere is interfering or hijacking the authentication process Three of the computers laptops are brand new just purchased last week and setup this week The HostPC is also fairly new just purchased last month I am not using a HomeGroup and have removed all computers that were part of a HomeGroup I have enabled file sharing and network discovery and enabled Use user accounts and passwords to connect to other computers on all PCs I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it It is a Sagemcom Model F ST N All computers are connected wirelessly Time is correct on all PCs I cannot use Group Policy since they re all Standard or Home edition DHCP is enabled and all computers are on the same subnet using the x range of ip addresses The six computers are as follows I figured this may make is easier to visualize the layout HostPC HP Desktop W PC Name DrsBlend U N DrsBlend p w not showing my real password PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Laptop W PC Name DrsBlend- U N DrsBlend P W PC HP Desktop W SP PC Name DrsBlend- U N DrsBlend P W PC Dell Laptop XP SP PC Name DrsBlend- U N DrsBlend P W Every PC stated above has the same user name and password and is logged-in with the username DrsBlend and the password The quot Logon failure unknown user name or bad password happens when trying to access HostPC PC or PC from PC PC or PC The HostPC can see and connect to all the PCs but only PC and PC can talk back or access the HostPC It s like the HostPC and PC and PC are in their own little clique and can talk back and forth to each other Those three PCs can also talk to PC PC and PC as well but PC PC and PC cannot talk back to them HostPC PC PC Profile corruption I would have entertained that thought but the fact the first three PCs can access and talk to one another kind of defeats that idea and the fact the PCs were just recently setup Firewall Disabled and disabled TrendMicro with no change With them on off the first three PCs can still talk to each other and the rest of the PCs Anyone have any additional suggestions nbsp

A:"Logon failure: unknown user name or bad password” even with correct credentials

I experienced a similar problem when I was trying to network my 8.1 machine the host network. As you say the host PC can see and connect to all of the machines, but not the other way around. Not sure if it is the same in your situation but I found that Microsoft's idea of network sharing on the Windows 8 class of OS differs greatly from previous OS's in that you can connect to it from an external host, but when trying to do the other way around it doesn't "see" the PC in question due to differing network sharing protocols included in the OS.

Anyone feel free to correct me if I am wrong, I am speaking only from what happened with my network.
 

http://www.techspot.com/community/topics/logon-failure-unknown-user-name-or-bad-password%E2%80%9D-even-with-correct-credentials.201313/
Relevancy 21.93%

Hey Guys,

I have Toshiba satellite laptop, but suddenly its screen starting showing like this...Can anybody help me to fix it. Thanks


 

A:Display Problem

This is an indication of a broken LCD panel. Probably caused from dropping or putting something heavy on the closed laptop. The LCD panel will have to be replaced
 

http://www.techspot.com/community/topics/display-problem.199637/
Relevancy 21.5%

Hello! I'm having no luck with previous threads regarding this same question.

For starters, I just bought two new items for my computer so it's not entirely new, but quite the upgrade

Previous Specs:
PSU: 500w
CPU: AMD Phenom II x4 965
GPU: nVidia GeForce 660
MOBO: Biostar A880GZ
RAM: 8GB

New Specs
PSU: 500w
CPU: Intel Core i7-4820K
GPU: nVidia GeForce 660
MOBO: BIOSTAR TPOWER X79
RAM: 8GB

I boot it up and hear no beeping sounds all fans are running well. I believe I have everything in place. I can provide pictures if needed.

Thanks in advance!
-Adrian

Bumping with my PSU: http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Maybe there are some extra plugs I need in the PSU that my current one isn't offering?
 

A:PC turns on; Monitor won't Display

Recheck all your connections. Plus make sure your video card and memory are seated. The PSU should be fine.
 

http://www.techspot.com/community/topics/pc-turns-on-monitor-wont-display.197972/
Relevancy 21.07%

Hi

I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V

Holding down the power button en stop/reset won't work

How can I test the logic board is defect?

Image logig board






Cheers
Harrie
 

http://www.techspot.com/community/topics/canon-printer-pixma-mp610-no-power-no-display.197978/
Relevancy 21.93%

Ok so I have a computer about months old I have always had it hooked up to No Display my tv with an hdmi cable Well I switched that hdmi cable over to my xbox I then switched it back to my computer and now nothing is displaying on my tv I tried restarting and removing power supply and nothing seemed to work I took the computer monitor out of my sisters room and hooked it up to my PC and nothing displayed there either The monitor would just say going to power saving mode I know that the VGA wire is connected correctly because when I remove it the monitor shows a message saying quot no vga detected going into power save mode quot and when I plug in the vga it just simply No Display say going into power save mode I tried pushing keys on keyboard and moving mouse and such and nothing happens anyone know whats happening and how No Display to fix this nbsp

A:No Display

Please list your computer specs. This will help someone assist you better.
 

http://www.techspot.com/community/topics/no-display.197714/
Relevancy 23.22%

Hey guys,

I'm needing some information that is extremely hard to come by.

The 740m in the HP Envy 17t-j000, does anyone know, or does anyone know WHERE to look (Google failed me, or I failed Google!) to find out whether it needs ACTIVE displayport -> HDMI adapters?

I question this because I know the 57xx series from ATI required active. The card only supported 1 RAMDAC signal (or something?) and the Nvidia's tech seems different. According to HP support, passive will work fine. I need to have the adapters ordered ASAP, but I do not want to order the incorrect ones.

Any assistance is appreciated.
 

http://www.techspot.com/community/topics/hp-envy-17t-j000-w-740m-triple-monitor-setup-questions.197029/
Relevancy 24.51%

I have a 430gt with 3 monitor hooked to it , but I can only display on 2 .So is there a program that is good to use . to make all 3 display at the same time . So I can play games on 1 and have the on another and maybe run something else on the other?
 

A:3 monitor setup

Well I do believe the GT 430 only supports up to 2 monitors running at the same time if im not mistaken, im looking on NVidia.com and it seems to be so. However if you are running on an Intel Processor, you can set it to support a third monitor by plugging into the Intel HD on board graphics to get a third monitor going.
 

http://www.techspot.com/community/topics/3-monitor-setup.196949/
Relevancy 24.51%

Today I boot my 1 year old computer this message appears:

"Please enter SETUP to recover BIOS setting

Press F1 to run SETUP"

I did the F1 thing, reloaded my OC profile and everything seems fine right now. Anyone knows why this happened? And above all: what are the chances of this happening again on my next cold boot? How to fix?


Operating System
Windows 7 Ultimate 64-bit SP1
CPU
Intel Core i5 2500K @ 3.30GHz 33 °C
Sandy Bridge 32nm Technology
RAM
8,00GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
Motherboard
ASUSTeK Computer INC. P8P67 (LGA1155) 28 °C
Graphics
E2250 ([email protected])
2048MB NVIDIA GeForce GTX 670 (Gigabyte) 30 °C
1024MB NVIDIA GeForce GTX 560 Ti (Elitegroup) 28 °C
ForceWare version: 326.80
SLI Disabled
Hard Drives
932GB Seagate ST310005 24AS SCSI Disk Device (SATA) 25 °C
Optical Drives
HL-DT-ST BDDVDRW UH12LS29 SCSI CdRom Device
Audio
Realtek High Definition Audio
Operating System
Windows 7 Ultimate 64-bit SP1
 

A:Press F1 to run SETUP

It could be possible your cmos battery is bad. Beings its a year old. I would think this would not be the case. But you never know how long the manufacter had the battery. Before installing the battery on your motherboard.
 

http://www.techspot.com/community/topics/press-f1-to-run-setup.196470/
Relevancy 21.07%

Hey everyone I idle monitors display Dual PC after anything won't occasionally is ve been having a recent issue with my monitors and it s really been stumping me lately I recently acquired a nd Yamakasi x monitor from South Korea I love these things and while the monitors themselves are working quite well I ve been having an issue since I connected the nd one Occasionally maybe - of the time when the PC has been idle for long enough that Dual monitors occasionally won't display anything after PC is idle the monitors have turned off when I come back to the PC and move the mouse or press a key on the keyboard the monitors turn back on and I am promptly greeted with a black screen on both however it appears that there IS a signal as the monitors turn on and remain on however that signal is just a blank black screen I ve got both monitors beside each other and the one on the left side is plugged directly into the dual link DVI port on the back of my master in my crossfire configuration The right-side monitor is plugged into an active displayport to dual link DVI adapter which also requires a USB port for power When I notice this black screen effect I also notice a small thin blueish bar spanning the height of the right monitor at the far right side of the screen this bar looks about the same thickness as the side edge of an open window in Windows but I ve never been able to tell if that s what it is or not UPDATE Upon closer inspection of the quot blue bar quot I can now tell that it doesn t look quite the same as the Windows side edges of a window It does span the entire vertical length of the screen it s about - pixels wide fairly bright blue and the far left or right seems to be random as to which it is column of pixels is a brighter blue than the rest Also the line isn t QUITE at the far edge of the screen it s offset from the edge by about another - pixels When I get this black screen effect the mouse cursor will never appear and no matter what I do including pressing control-alt-delete nothing else will ever appear on the screen If I press the power button I can see and hear my PC doing the usual process that it does when Windows goes through a normal shut-down which is the current setting for the functionality of the power button and then it turns off like normal Upon restart the issue is gone of the time until the PC is left idle again except that the right-hand displayport adapter monitor is not recognized by Windows upon reboot until I unplug and replug it I m running Windows Professional and I just freshly reinstalled Windows on a blank solid state drive within the last two weeks It appears to me that Windows is still running just fine since it seems to shut down normally and it looks almost as though the black screen is a huge window that is stretched almost fully across my monitors with only the far right edge visible and without any way to interact with this window However I also wonder if it could be an issue with the dual link display port to DVI adapter because every single time upon restart of the PC after this issue occurs it only recognizes the left side monitor and won t recognize the right one until I unplug the adapter from the displayport and reinsert it Obviously I don t want to be unplugging and replugging my monitor on a daily basis so I m wondering if anyone has heard of a similar problem or what I could possibly do about this Thanks in advance everyone nbsp

A:Dual monitors occasionally won't display anything after PC is idle

Update: I've discovered that usually the problem can be solved by unplugging and replugging the displayport adapter while the PC is on, but only if the aforementioned "blue line" is present on the right-hand screen when I move the mouse. Yesterday, I had a similar issue except that instead of turning back on and detecting the PC's video signal which is just a black screen for both of them (with blue bar on the right one), the monitors (both of them) refused to even acknowledge that there was a signal coming to them at all and wouldn't even turn their backlights on or wake from sleep mode. Even when I hooked up 2 different monitors using standard DVI-D single link or dual link cables, I still could not get any video signal to output at all, to ANY monitor.

Turning my speakers on, I found that I could hear the Windows 8 "device connect" and "device disconnect" sounds when I unplugged or replugged either of my 27" monitors, but nothing at all was heard when attempting to switch to other monitors. This tells me that Windows IS detecting and seeing the monitors, but somehow the video signal is just not reinitializing properly after the computer turns the monitors off after idle time.

The only solutions I've got at the moment are to set Windows to NEVER turn my monitors off, or to shut down the PC every single time I'm done with it; neither of these solutions are particularly pleasing to me. Please let me know if anyone has any advice at all, even if it's just an idea that may or may not work out.

BTW my PC specs are:

2500K currently at stock settings
16 GB Patriot DDR3-1333
MSI Z68A-GD55 B3
2x Radeon HD 7950 also currently at stock settings
120 GB Vertex 3 (OS/main apps drive)
1TB WD Blue
1TB WD Black
1000W Cooler Master modular PSU

 

http://www.techspot.com/community/topics/dual-monitors-occasionally-wont-display-anything-after-pc-is-idle.196256/
Relevancy 21.5%

Please help. I have just purchased a HP Pavilion p62480ea desktop PC. This all worked fine out of the box.
I also purchased a Geforece GTX 650 Ti graphics card - when I put this in I'm getting no signal on my monitor - using HDMi and DVI cables. (I also installed a new 430w power supply)

When I take the graphics card out and go back to the GPU on the motherboard everything works fine.

I've read that going into the BIOS and turning off delete/uninstall the video driver in device manager>>>turn off computer>>>install the graphics card - has worked for others.
I've tried going into the BIOS but I'm getting no signal when I restart this way.

If anyone could help it would be greatly appreciated.
 

A:No display after upgrading video card

Did you connect the six pin PCI-E power connector from the power supply to the graphics card?
 

http://www.techspot.com/community/topics/no-display-after-upgrading-video-card.195568/
Relevancy 24.08%

Greetings you lovely bunch I am in the process of building myself a new funmachine Unfortunately I have stalled at the sound setup Through extensive research I have established that the following criteria are the most recommendable in order to achieve the best overall sound experience Avoid headsets headphones with microphones Avoid wireless Avoid USB Only stereo headphones I e one speaker per spectacular setup Seeking sound ear Open cup for sound quality I sit in a quiet environment The machine will be used mainly for entertainment purposes being gaming video watching and music listening in order of importance I do not consider myself an audiophile per se I do however value a great atmospheric feeling Seeking spectacular sound setup accurate D positioning and comfort I already plan on getting the Gigabyte GA-Z X-UD H motherboard Will its onboard sound Realtek ALC cover my wishes when paired Seeking spectacular sound setup with some good headphones or should I get a soundcard And what about an amplifier a DAC etc Originally I considered getting the Sennheiser HD as it has garnered much critical acclaim Unfortunately momomo wasn t impressed with its sound stage Despite my highest efforts this leaves me fairly puzzled and in need of your kind help Which sound setup compliments my computer experience the most without being overkill I have a generous budget All response is of course greatly appreciated nbsp

A:Seeking spectacular sound setup

"I already plan on getting the Gigabyte GA-Z87X-UD4H motherboard. Will its onboard sound (Realtek ALC898) cover my wishes when paired with some good headphones ? or should I get a soundcard? And what about an amplifier, a DAC etc.?" You won't need a sound card, just headphones or a low cost wired 2 speaker+ powered subwoofer
 

http://www.techspot.com/community/topics/seeking-spectacular-sound-setup.194793/
Relevancy 24.51%

I have an EVGA GTX 560-Ti graphics card connected to two monitors. The primary monitor is a Syncmaster 2433BW and the second monitor is a Syncmaster 204B. Everything was fine until this morning when I booted up and found the second monitors resolution way off. After entering the NVIDIA control panel I found the monitor simply identified as Digital Display with a very limited resolution table available, the monitor was set to 1024x768. On the control panel resolution screen it is identified as "Generic Non-PNP Monitor with only two resolutions neither of which is the recommended 1600x1200. I have tried uninstalling and reinstalling the driver with no improvement.
 

A:Lost monitor ID in setup

Have u tried This option the Resize? I use this due to my Samsung tv doesnt have really good scaling which I was left to using a random resolution but this random resolution still is read from the tv as 1920x1080 maybe it might work for u

if this doesnt work I havent actualy got which driver did u install nvidia driver or the monitor one? if so this is were u should go
<-this image seems to not be working right click open in new tab

Right click my computer Properties Device manager and rightclick on the monitors and update software
 

http://www.techspot.com/community/topics/lost-monitor-id-in-setup.195406/
Relevancy 21.07%

Hi im pretty good with problems but this one is doing my head in now the problem is im not sure what the actual problem is the symptoms include corrupted desktop display game crashing corrupted firefox display these symptoms are not continual and dont Corrupted game crashing desktop display, appear after boot up ati smartgart reports agp is off adjusting it makes no difference the system is old but has been very reliable mobo is asrock i gv with onboard vga cpu dual core intel mem gb o s xp pro sp graphics card ati radeon mb agp directx all drivers are current including chipset drivers things ive done reinstalled graphics card and drivers and onboard vga drivers ive tried using the onboard Corrupted desktop display, game crashing vga without the radeon installed but have same problem have disconnected all usb devices but no change have tried other hdds with xp pro o s and still have the problem this makes me think its a hardware problem mobo perhaps have checked forums but no help anyone have any idea any help would be appreciated its got me baffled the worst symptoms are when trying to start games and these games are old and according to their requirements this system is well above the recommended they recommend pentium or above thats how old they are lol oh and I have a superfast modern pc but this one was the first I built so it has sentimental value hence not keen on scrapping nbsp

A:Corrupted desktop display, game crashing

1st 3 lines lead me to believe currupt grapics card might be wrong but desc top games etc all use graphics..
I do think its got something to do with graphics I could be totally wrong but seams very strange how mainly problem is when starting games. or maybe psu could be faulty and now supllying enough power lets see what the real tech guys say
 

http://www.techspot.com/community/topics/corrupted-desktop-display-game-crashing.193672/
Relevancy 24.51%

Hello All I have decided on the following Cooler Master Eisberg L Prestige Alphacool NexXxoS XT Radiator mm And I m deciding on a GPU block at a later date when the new Nvidia cards come out I Setup together Linking Watercooling help was hoping to set it up Watercooling Setup Linking together help as Pump Reservoir is built onto the CPU block which makes this all very easy supposed to anyway and is upgradable so you can add an extra few items to the loop I was hoping to mount the mm radiator it comes with to the top of my case and the extra mm radiator to the back of my case I was hoping having the mm radiator cool the water before it entered the graphics card block would help yield better results and thus the fans can run at a slower speed I m not trying to break any records and certainly don t plan on overclocking a whole much I just find water cooling much quieter in general compared to a multi-fan heatsink and a load of case fans plus the fans on the GPU My question is can this be done I m rubbish at checking the tubing sizes and what I need to actually connect it all up preferably white hose Any advise would be very much appreciated nbsp

A:Watercooling Setup Linking together help

Unless getting this kit for the same amount of money would be better?

http://www.watercoolinguk.co.uk/p/Alphacool-NexXxoS-Cool-Answer-240-LTST-Full-Kit_30211.html
 

http://www.techspot.com/community/topics/watercooling-setup-linking-together-help.192663/
Relevancy 24.51%

Hi all I am going to be buying new HDD s and would setup Raid0 New Here, like to setup a raid on them using New Here, Raid0 setup windows bit I also would like to install a rd SSD for Ubuntu type drive in my optical bay I have no clue as to the proper order for this operation optical replacement first or raid setup first I am not totally new to computers but I have mainly worked with desktops before I do understand my laptop though as I have opened it up for HDD and RAM upgrades and the Optical bay looks pretty simple with only a few screws to remove I need step by step instructions for the raid setup and where to get the drivers for it if windows bit DVD does not have them already The installation of the SSD into the optical bay is no problem nor is installation of the dual Hybrid drives I ll be getting so it s mostly the software setup of things for the raid I was going to enter some links to the gear I would like to get but this site gave me some BS about Kismet So I will leave them out for now Let me know if you need to know the gear to help me here For now my system is the G sx If there is a better bay replacement HDD or SSD that you know and has awesome reviews please let me know I like to buy things on Amazon for the most part as the return process has been excellent for other things before just in case I should point out also that this rig will be gaming mostly with the ssd ubuntu setup for everything else and to play around with Linux for fun Thanks Ahead nbsp

A:New Here, Raid0 setup

HALT, STOP, DESIST;

Rule 1:- never use raid-x for a BOOT device.

Rule 2:- don't assume that Raid-0 is "faster" or that Raid-1 "doesn't require backup"

Rule 3:- Raid is a Server feature, not intended for the home user.

Now then, go read all you can about Raid before you spend $0.10 more.
 

http://www.techspot.com/community/topics/new-here-raid0-setup.192766/
Relevancy 18.92%

Hiya,

trying to resolve an issue with my homebuilt computer crashing while playing games. I had an HIS Radeon 5770 installed. I removed it and put in a Radeon 6670. When I powered the computer up, I got "no signal" on my display. I removed the new card and put in the old card again. "no signal"

I tried both in another PCIe slot. "no signal"

For the record, I have a Rampage III Formula mobo. There's no onboard video, so I can't try the computer without a video card.

Help?
 

A:Installed new Graphics card, now neither new nor old card sends signal to display

Have you tried clearing the mobo's CMOS (including battery removal) ?
Did you test the HD 5770 in another machine to see if it was indeed failing ?
 

http://www.techspot.com/community/topics/installed-new-graphics-card-now-neither-new-nor-old-card-sends-signal-to-display.192721/
Relevancy 21.5%

Hey guys , I just bought an HIS AMD HD 6670 1GB GDDR5 GPU.
Im facing a big problem fixing this issue, first of all my specs are :-
i3 2100 - 3.10 GHZ processor
4GB DDR3 1333MHz RAM
Current GPU - : Nvidia EN210GT(Silent series)
1TB HDD - WD.
400 Watt SPMU (PSU)
MOTHERBOARD : INTEL DH61ww

Problem: when I use my old GT210 my monitor shows up everything. Works perfectly.
when I put my NEW HD6670 , Im getting NO Display from the CPU /GFX card.
PLEASE HELP ME !
My Monitor is DELL IN1920 which has only a VGA Port & my HD6670 has VGA , DVI & HDMI port .
BUt I tried all still got NO Signal.
I tried this card on other pc. It worked but idk why isnt working on this.
 

A:Monitor - No display when i put my HD6670 into motherboard

Try this: With the GT 210 installed uninstall the Nvidia graphics driver from Add or Remove Programs (XP) or Programs and Features (Windows 7). Shut down PC and remove old card and insert new card. Connect video cable to new card and turn on PC. See if the monitor displays anything. If it works, install the latest AMD graphics driver.
 

http://www.techspot.com/community/topics/monitor-no-display-when-i-put-my-hd6670-into-motherboard.192615/
Relevancy 24.08%

Hello I have read a lot of posts on here about personal laptop CPU s usage spiking while gaming watching videos or opening programs I have tried all of the recommendations given reasons unknown for CPU spiking and still have not seen any results Anytime I open any CPU spiking for unknown reasons program game or anything my CPU usage spikes to or higher I have closed all of the processes that can afford to not be running but the that does not help Whatever program is opened or running no matter what it is keeps spiking the CPU An example is if I run a game such as League of Legends it will start out fine with fps but slowly drop to to fps I have set all of the graphics to low and turned shadows off and it does not help My CPU fan stopped working and I took apart my laptop and fixed it and blew it out with compressed air but all that fixed was the heating issue The hottest the CPU gets now is c Before my fan went out I could run anything without a problem I have run AVG Malwarebyte CCleaner updated all the drivers but nothing seems to help Here are some screenshots I took This is just from opening League of Legends This is from opening techspot com Here is a screenshot with the Resource Monitor Here is my system information Operating System Windows Home Premium -bit Build Service Pack win sp gdr - System Manufacturer Hewlett-Packard System Model HP Pavilion dm Notebook PC Processor Intel R Core TM i CPU M GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM DirectX Version DirectX Graphics Card Intel R HD Graphics Chip type Intel R HD Graphics Core i Current Mode x bit Hz Driver File Version English Driver Version Driver Model WDDM I cannot figure it out and its driving me mad Thanks in advance for any and all help nbsp

A:CPU spiking for unknown reasons

First, is your C1E feature activated? Disabling it on my friend's PC fixed a similar issue.
Secondly, can you check which process is spiking? Open the Processes tab in Task Manager and check "Show Processes from all users". See which process is spiking, and kill it if it shouldn't be there, or has an unusual name (like all caps names. example RUNDLL32.EXE). Then see if CPU usage spikes.
Let us know how it goes.
 

http://www.techspot.com/community/topics/cpu-spiking-for-unknown-reasons.180911/
Relevancy 21.5%

Hello First time posting here I apologize if this is not in the correct forum Anyway I have been having some showing device Dxdiag not display trouble with my graphics card drivers I experienced some graphical glitches followed by a blue screen of death a few days ago and since then my graphics card has not been working I have groups of vertical lines running down my screen My dxdiag does not show anything for display device I am using Dxdiag not showing display device an NVIDIA GeForce GTS and when I open the device manager it gives me error code for display adapters Additionally when I try to open the NVIDIA control Dxdiag not showing display device panel it says I am not currently using a display attached to an NVIDIA GPU I have reinstalled the drivers several times using both the express and custom clean install I have run driver sweeper in safe mode Nothing I have done has had any effect Please help At this point I am assuming I need a new graphics card but am hoping there might be another issue Here is my dxdiag ------------------ System Information ------------------ Time of this report Machine name DAN-PC Operating System Windows Ultimate -bit Build Service Pack win sp gdr - Language English Regional Setting English System Manufacturer System manufacturer System Model System Product Name BIOS BIOS Date Ver Processor Intel R Core TM CPU GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name Manufacturer Chip type DAC type Device Key Enum Display Memory n a Dedicated Memory n a Shared Memory n a Current Mode x bit Hz Driver Name Driver File Version Driver Version DDI Version unknown Driver Model unknown Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d n a WHQL Date Stamp n a Device Identifier D B EE - - CF-B -B DAEC CB Vendor ID x Device ID x SubSys ID x Revision ID x Driver Strong Name Unknown Rank Of Driver Unknown Video Accel Deinterlace Caps n a D D Overlay n a DXVA-HD n a DDraw Status Not Available D D Status Not Available AGP Status Not Available ------------- Sound Devices ------------- Description Speakers High Definition Audio Device Default Sound Playback Yes Default Voice Playback Yes Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS B amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS B amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV am... Read more

A:Dxdiag not showing display device

Are you sure your DVI, display port, HDMI, etc is connected to the graphics card not to the onboard graphics? Try reseating the card on another PCIe x16 slot. Make sure the display connections are connected to the GPU not the onboard graphics. Do the clean install to the latest stable drivers (314). Driver sweeper should have cured any software issues. If the reseating, checking the connectors, etc doesnt work, it is most likely an issue with the card.
 

http://www.techspot.com/community/topics/dxdiag-not-showing-display-device.192194/
Relevancy 24.94%

Hi I m setting up my PC amp stuck between set of options Both of the setups fits within Rs - which is my budget I will be gaming mostly and no multitasking only single threaded applications I want the best cpu clock speed amp overall graphics possible and also which will serve me good for atleast to years My options are AMD FX- MSI A-G AMD Motherboard AMD ATI HD GB GDDR AMD A - K ASUS F A -M-PRO Motherboard ASUS AMD ATI HD GB GDDR CrossFire-ed with the APU help PC Setup Graphics I don t know whether the MSI mobo I mentioned in the st option is the best but it is surely PC Setup help one of the cheapest If there are any other good amp cheap am mobo and or any gfx card that fits in the budget please mention Also if you think that any other combo of these three viz CPU GPU amp Mobo suits my requirements amp budget better PC Setup help please suggest Thanks nbsp

http://www.techspot.com/community/topics/pc-setup-help.192000/
Relevancy 21.07%

Hello folks I have the exact same problem - with my satellite L D-S I am quite sure that the hdd is still ok and the ram is too Upon power on the power light turns on hdd spins up the hdd light flickers a little then it does nothing No backlight no image no error beeps either Quite disappointing as it was in sleep mode and it started doing this when I woke it up Never had a problem with it except for a loose solder connection on the power jack which I fixed about a year ago I am an electrical engineering student so I like to get some experience trying to fix this The computer is about years old phenom II triple core cpu g of memory g hdd and some sort of radeon graphics chip Worse case the graphics chip could be dead No video output from external monitor connector If you need more info I will gladly share it BTW the cpu gpu heatsink warms up as usual and the fan runs too VERY puzzling Cheers -Ben nbsp

A:Toshiba Satellite L645D-S4056 no display

The motherboard (GPU chip) is bad. The motherboard will have to be replaced. They are available on EBay usually for way under $150 daily
 

http://www.techspot.com/community/topics/toshiba-satellite-l645d-s4056-no-display.191045/
Relevancy 21.5%

My friend have a dell D630 laptop and he does'nt display...
when it turn On we here the welcome sound but can not see any thing...
can any one tell me what to do????
 

A:Dell laptop display problem

Hook it up to an external monitor. If it works, the display/connector is bust.

If it doesn't work, mobo/GPU is bust.
 

http://www.techspot.com/community/topics/dell-laptop-display-problem.191251/
Relevancy 23.22%

Our internet goes from:

Comcast modem to a
Dlink DIR-655
To computers or through a switchbox to other parts of the house
In the basement, is another switch box, and off that switchbox is,
Belkin 85c Wireless router, that we use as an access point
Works well but it says it has the ability to have a guest login, that will allow visitors to get to the internet, but are blocked from our LAN.

I've spent hours trying to set the guest login up, the access point can be seen by a computer/etc, but when they connect, they cannot get to the internet.

the windows 7 computers try to set up an unidentified public network.

I'm sure there is something very simple I am missing, but I've got close to 20 hours invested in it, and need to protect my network.

the Windows 7 notebook said that it could not connect with a "homegroup".
 

A:Belkin 85c wireless router, used as an access point. Guest setup?

Hmm; I cant find "Belkin 85c Wireless router" on the Belkin Support site - -
Are you sure of that make/model number?
 

http://www.techspot.com/community/topics/belkin-85c-wireless-router-used-as-an-access-point-guest-setup.190913/
Relevancy 21.07%

I was playing Dard siders Suddenly I got a call in my mobile So I left the game running w o pausing and attended the call Suddenly I saw my monitor screen went off I checked the power connections VGA cable connection b w the monitor amp the CPU They were all fine I just can t see anything in the monitor The monitor 7750 HD fan display working & 1GB) (Powercolor Radeon No stopped LED is showing the status of quot no I p quot LED going on amp off I got confused and tried forced shutdown amp restarted the machine Everything is perfectly normal Even the beep sound from CPU But still there is no No display & fan stopped working (Powercolor Radeon HD 7750 1GB) display I was wondering whether the problem could be with the graphics card And later I confirmed it I found it lying dead inside the cabinet The fan is not running Hence I changed the VGA cable from the GPU port to Motherboard VGA port I saw the machine is ready for login in the monitor screen Therefore I decided that there is no issues any other components inside the cabinet I still had a doubt in the PCI slot of the motherboard Hence I swapped the GPU with another standy GPU ati radeon hd which I was using before I got the display from this card too Finally I concluded that the problem is with GPU only I was shocked since I bought this card for - INR last month No display & fan stopped working (Powercolor Radeon HD 7750 1GB) only Even I changed My PSU which provides Watts added GB of additional RAM amp a additonal CPU fan I still dont understand what has caused this failure I removed the card to see any H W faults But there is nothing in No display & fan stopped working (Powercolor Radeon HD 7750 1GB) the card It still looks good When I reseat the card amp turn the power on The fan starts to rotate amp stops immediately spins less than quarter of sec Can anybody suggest any troubleshooting which can be done from my side Or please explain what has happened nbsp

A:No display & fan stopped working (Powercolor Radeon HD 7750 1GB)

Could not really tell you why the card went bad, But they do sometimes. If you have a warranty on it . I would send it back for a replacement. Seeing as it not your main board . All your other video graphics work.
 

http://www.techspot.com/community/topics/no-display-fan-stopped-working-powercolor-radeon-hd-7750-1gb.186625/
Relevancy 24.51%

Purchased a Epson WF-3540 printer for home use. Cannot get my computer to detect the printer on wireless network during software setup. Here is what I have:

1. Computer detects printer with usb cable connected and prints perfectly.
2. Printer detects wireless network and has 3 green bars.
3. Printer passed all its internal network connection checks and everything seems OK on the network status printout.

Installed software on my laptop and it too could not detect the printer on wireless network.

So I'm able to set the printer on my wireless network but can't the computer to detect or recognize it. Any suggestions?
 

A:Wireless setup

Make sure you connect with ONE or the OTHER but never both.
I suspect you would rather have the wireless connection, so go to devices & printers and delete the USB connected device.
 

http://www.techspot.com/community/topics/wireless-setup.187949/
Relevancy 21.07%

I have a Gateway FX Gaming computer Link http www newegg com Product Product aspx Item N E and I try to plug in the video card given in the graphics description in link quot NVIDIA GeForce GT Over-Clocked w MB on board memory and DirectX quot Which as far as I know the video card was made to fit the computer When ever I try to plug the graphics card into my computer I dont get any display on my monitor at all Also The power button-light flashes Both fans computer and video card turn on and work But after a minuite or monitor in? plugged is card No display on when graphics so the computer turns off My onboard normal graphics work normally but obviouly arent very good for gaming If there is any way possible to fix this problem please reply I am very eager to resolve this issue Additional Details My computer hasnt worked with my No display on monitor when graphics card is plugged in? graphics card before therefor I decided to Restore my computer to factory settings and still didnt work and thats where I ended up now nbsp

http://www.techspot.com/community/topics/no-display-on-monitor-when-graphics-card-is-plugged-in.188450/
Relevancy 21.5%

Hi I have horizontal lines that scan my monitor whenever I play a game I can see the horizontal lines only on darker colors like grey dark-green etc I have a Samsung E display that runs at p on hz on a vga cable no hdmi dvi support on it I tried another few vga cables I tried some other power cable but with the on my Horizontal monitor display waves same result the waves were there I have all drivers updated monitor and other hardware My current PC specs are AsRock N -C S UCC Phenom II x Gb DDR Radeon HD gb HDD Sata and a power supply Sirtec W If I open Far Cry for example I get those horizontal lines If I Horizontal waves on my monitor display minimize the game I still get the horizontal lines if I have something dark on my display a grey dark-green dark-blue website Before the HD I had a GTS and had the same problems Could it be the PSU or the motherboard or what I also tried a different display monitor on the VGA and had the same horizontal lines scaning my display monitor but on the DVI the problem disappeared The thing is that my monitor doesen t have a DVI only VGA The monitor is a year old still under guarantee same goes for the PSU and the other components Sorry for my bad English I hope that you can help me nbsp

http://www.techspot.com/community/topics/horizontal-waves-on-my-monitor-display.188186/
Relevancy 21.07%

Please excuse my english...
my netbook display become stretch like in this picture :

and it can't get past the POST screen. I tried to remove the RAM and put it back again with no luck...

please give me solution for this....
 

A:Netbook display becomes stretched, can't get past POST

Can you re-post the picture?
 

http://www.techspot.com/community/topics/netbook-display-becomes-stretched-cant-get-past-post.187760/
Relevancy 21.07%

Hello Community My name is Andrew Fratello and I work for a computer repair shop in Florida I m new in the field at a professional level but I ve been tinkering with computers since I was a little kid I m new to this site as well and I hope it to bring me some good help with some of my future work if I cant trouble shoot it myself The HP Pavilion Dv - dx Laptop came into the shop today The problem with the PC is that it doesn t have any display HP laptop Dv6-3025dx issue Pavilion display at all You can turn it on and it will stay on just fine but even when I plug in a VGA cord connected to one of our shop HP Pavilion Dv6-3025dx laptop display issue monitors the screen still isn t displaying If it was a LCD screen issue I m sure I would have been getting video feed from the external monitor which leads me to believe that the motherboard is malfunctioning I want to double check here with you guys and get a couple opinions before I let the guy know what the problem is and what needs replacing The last thing I want to do is have the gentleman buy a new part that is worth a couple hundred and then it turning out to not have been the problem at all Please get back to me ASAP Thanks and looking forward to your responses nbsp

A:HP Pavilion Dv6-3025dx laptop display issue

My guess would be the video chip. If you are not getting it on either screen.
 

http://www.techspot.com/community/topics/hp-pavilion-dv6-3025dx-laptop-display-issue.187734/
Relevancy 24.08%

I have an unknown icon between my pc and router in my network map. It is a secure net work. Also, I hear other people's conversation, music, background noise like someone is connected to me computer remotely. Someone please help it's freaking me out!!!
 

A:Unknown connector between my PC and router

Unplug your computer from your router at your computer's network card. Do you still hear the conversations, music, background noise? Or do you have a wireless network card and that's why you included the word secure?
 

http://www.techspot.com/community/topics/unknown-connector-between-my-pc-and-router.186962/
Relevancy 24.51%

Hi I have a Coolermaster setup the suggestions Fan 922 for HAF HAF case and my computer specs are as follows Asrock N C-S mobo AMD Athlon II X Arctic Cooling Freezer pro GB x GB Corsair Vengeance DDR RAM PowerColor HD GB GPU Coolermaster GX w PSU Running Win Ultimate I also have x HDD s in the case soon to be x HDD s and an SSD Fan setup suggestions for the HAF 922 for the OS when I get time to install it Anyway that s the spec The case had two stock fans- front mm x mm and rear mm x mm The rear case fan wasn t very quiet however so I went ahead and purchased a Sharkoon silent eagle mm This isn t actually as silent as its name suggests but it does seem to create better airflow and it has reduced noise levels slightly What I d like help with is finding an ideal fan setup for my case which will keep it as quiet as possible but also keep it cool I use the computer for gaming using resource-hungry programs like the Adobe suite I know there s going to need to be a compromise and I m fine with that but I think I d prefer it to be more geared towards the silent side rather than performance My questions are Do I need a side or top fan If so what sizes do I need and should they blow air in to the case or suck it out Should the rear fan be sucking air into the case or blowing it out Can I replace the fan on the Arctic Cooling Freezer to a Sharkoon because the freezer fan is the noisiest of the lot What is the actual size of the front case fan I d like to replace this as this isn t very quiet either I m open to any suggestions as I am clueless when it comes to building computers I just know how to use them Thanks Tom nbsp

A:Fan setup suggestions for the HAF 922

Lol, lovely username Tom.

I don't think you're going to get the case as quiet as I know you'd like, but as I've said before, maybe your best option is a fan controller, so you can turn down the noise when your working and then increase the fans for when your gaming to provide additional cooling performance.

If a controller isn't an option, I'd probably pip for Noctua NF-S12B FLX Ultra Quiet 120mm fans (one in top, one in side and one in the rear -- all as exhaust) as 60CFM @ 18dB is about the best you'll get for "silent" fans. Not cheap though, but will last years and years.

Combined with the intake fan at the front of the case and the other three all running as exhaust will cause the case to run negative air pressure, which is exactly how I ran my HAF 912+ -- The downside is the case will get dusty inside faster, but it will suck out heat much faster and run the computer cooler in my experience.
 

http://www.techspot.com/community/topics/fan-setup-suggestions-for-the-haf-922.186550/
Relevancy 21.5%

Hello,

I bought an industrial 42" PC screen recently and a new computer as well. Unfortunately when I turn on the computer it only displays as a 15" screen rather than 42" as it should

I have a HDMI cable plugged in and bought a graphics card but neither have solved the problem. The screen is made by Winmate and was purchased off ebay. The seller assured me that it worked "fine" for him and showed a full screen and was very unhelpful.

I can provide screenshots once I get home.

Thank you so much in advance.
 

A:Display is much smaller than screen

What is the link to the screen you bought?

Did you install the video card driver?

Does the screen have a driver?
 

http://www.techspot.com/community/topics/display-is-much-smaller-than-screen.185465/
Relevancy 21.07%

Hello I need some help pls.On the screen appeared some vertical lines and the computer goes very slow and pictures make waves when I move them.Also games go pretty bad with the exception of World of Warcraft that does not work at all and says "failed to find a suitable display device "

Windows XP Service Pack 2 x86 NTFS
Internet Explorer 7.0.5730.11
Motherboard: Micro-Star | | MS-7255
Processor: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz

C: is FIXED (NTFS) - 15 GiB total, 0,708 GiB free.
D: is FIXED (NTFS) - 218 GiB total, 72,918 GiB free.
E: is CDROM ()
 

A:Display issues, vertical lines and other distortions

First things first, have you tried reinstalling/updating your video card drivers?
 

http://www.techspot.com/community/topics/display-issues-vertical-lines-and-other-distortions.184867/
Relevancy 24.51%

Hey Guys,

I recently got a new laptop with two drives, my 120GB SSD which I boot from, and a 750GB HDD.
Right now I am trying to figure out how to keep crap that I don't want off my SSD as I would like to actually be able to install a few programs on it. I have tried going into the registry and changing "ProgramFilesDir", "ProgramFilesDir (x86)", ProgramW6432Dir", "CommonFilesDir", "CommonFilesDir (x86)", and "CommonW6432Dir" to my HDD with limited success - I cant remember if I rebooted before I tested it out, but I believe I did.

At anyrate, if you have and tips/suggestions for managing my files with multiple drives I would love to hear them!

Thanks,

Matt
 

A:Multi-drive setup

The single best thing you can do is map the "home" folders over to the mechanical disk. A SSD with 120GB is more than enough for the OS and pretty much all applications, as I currently use a 64GB SSD to do the same thing.

What you want to do is click start, then go to your "home" folder, and you'll see this:





All of your folders can be mapped to another disk, stopping files from building up on your SSD. To change the location of the folder, select a folder, then click the right mouse button, and choose properties.

Click the location tab, and then click move, and select the new location (create the folder on your mechanical disk with the same name e.g. my example is "Desktop," and I have it located on my 2TB mechanical disk.




Here is the folder I've created on my larger disk:





Select the folder, and press "select folder", then click apply, and "yes" when asked if you'd like to move the files in the existing folder to the new location. Repeat for all of your "home" folders.

In future all files will build up in the "home" folders on your mechanical disk, not your SSD.

I have several Adobe CS6 titles, as well as Office 2013, and around 50 other applications all installed on my SSD along with Windows 7 Pro, and I've still got 14.4GB free, so you should have considerably more free space on yours.





Installing applications on the SSD means they can use the increased performance it offers. However, there is little point installing games on the SSD, as the difference it makes is minimal, as the only time it "feels" faster is when loading maps or between turns. Games also use considerably more space than most applications do, so its not a very cost-effective way of utilising the SSD's limited storage.

You can install applications to another disk by changing the install location during setup. I'd advise you either create a separate partition for them if you intend to do so, but also keep to the same format (e.g. create a Program Files and Program Files X86 folders, and install them as required inside there.

As you'll see from the "my computer" image above, I have my games on a separate partition, and data on another (both make up a 1TB disk) which I use as a second location should I need to install storage heavy applications.

It is not recommended to make registry changes or to manually drag and drop "Program File" folders onto the mechanical disk as it can cause all manner of problems. If you want to move them, I recommend you first uninstall the application, then re-install it in the new location.
 

http://www.techspot.com/community/topics/multi-drive-setup.184798/
Relevancy 24.51%

im trying to put together a pc from parts I already own, how ever I have problems with understanding compatbility with hardware. perhaps if someone has the time they might be able to help me?

I have an antec nsk4400 case what type of mother board can I use with this
also I have a pair of 1gig (2gigs total) ram that is PC3200 400MHz DDR Desktop DIMMs I would like to add another pair of 2gig PC3200 400MHz DDR Desktop DIMMs for a total of 6gigs so im assuming the mother board has to have 4 slots for ram and also support PC3200 400MHz DDR Desktop DIMMs
I was hoping to find a compatible setup using these components and also would like to add a processor with built in graphics how hard is this to accomplish? if it helps my main goal is to have a decent gaming pc that can run gw2 and league of legends with ease.
 

A:Barebone setup

also these are the system requirements for both games thanks for anyone who takes the time to help me out

LOL
Minimum System Requirements:
?2 GHz processor
?1 GB RAM (Windows Vista and 7 users will want 2 GB of RAM or more)
?2 GB available hard disk space
?Shader version 2.0 capable video card
?Support for DirectX v9.0c or better
?Windows XP, Windows Vista, or Windows 7. (Note: Mac OS and Linux are not currently supported.)
Recommended System Requirements
?3 GHz processor
?2 GB of RAM (Windows Vista and 7 users should use 4 GB of RAM or more.)
?6 GB available hard disk space
?GeForce 8800 or equivalent video card (Dedicated GPU with 512MB+ Video Memory(VRAM))
?Support for DirectX v9.0c or better.
?Windows XP with the latest service pack installed, Windows Vista with the latest service pack installed, or Windows 7 (As stated above: Mac OS and Linux are currently not supported.)
?The latest update to .NET Framework from Microsoft

GW2
Minimum System Requirements Announced
- Windows® XP Service Pack 2 or better
- Intel® Core? 2 Duo 2.0 GHz, Core i3, AMD Athlon? 64 X2 or better
- NVIDIA GeForce 7800, ATI Radeon X1800, Intel HD 3000 or better (257MB of video RAM and shader model 3.0 or better)
- 25 GB available HDD space
- Broadband Internet connection
- Keyboard and mouse
 

http://www.techspot.com/community/topics/barebone-setup.184510/
Relevancy 24.08%

I have a Dell Inspiron I want to put a new wireless card in...
Since the driver wants to fail all the time. It's brand new and not even paid for fully yet. The wifi card doesn't wanna stay connected and disconnects from the internet quite a lot.
The wireless card I have is, well, I pulled it out of a toshiba and It doesn't help if I search the internet for the card.

The card has on it: ICASA TA-2008/567
Toshiba Gcode: G86C0004510

The words on the card look like they are in french. Any help?

RTL8187B
realtek owns it... Know where to get a driver that's a trusted source?
 

A:Unknown wireless card

Well in regards to a "trusted source" that you might secure the driver for a "RTL8187B", give the following source a try! I've been using C|Net for years, they almost have never let me down!

Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter Driver​
http://download.cnet.com/Realtek-RT...B-2-0-Network-Adapter/3000-2112_4-206215.html​

Good luck to you, I think this one is going to work out for you!
 

http://www.techspot.com/community/topics/unknown-wireless-card.183468/
Relevancy 21.93%

hello ever since I got my new video card its been working fine and everything but now there is a weird problem that happens during gaming I dont know if that problem has aname so im gonna try my best to explain exactly what happens



IM in the game without alt tabbing or doing anything but basically playing the game The screen turns black for 2 seconds and then comes back normally and it does the exact same thing 4-5 times one after another till it settles then starts doing the same thing again after like 3-4 hours I have tested it on several games (3D) and the same happens I need some assistance please
 

A:Display problems

please list your Power Supply Model and Wattage, and also your Video Card Model.
 

http://www.techspot.com/community/topics/display-problems.182858/
Relevancy 21.5%

So I have this problem that the tech guy at my school library did not even know what causes it I think it is a mixture of Screen display problems both hardware and software problems What happens is that sometimes when I open a new window or more commonly a web page about a third of the screen turns a random assortment of vertically striped colors - in the case with the attached picture it happened to turn white and black for the most part Functionally speaking this doesn t affect the operation of the computer as I can still click behind the messed up part and the computer responds but I have to click only through guessing that is I cannot see anything behind the stripes They disappear if the screen is shut off that s it which means that Screen display problems I have left the screen turn off option at one minute of rest Screen display problems One thing that I Screen display problems have noticed is that this usually if not always happens when I go to a webpage or document that has a black dark horizontal line or bar or large text at the top it always always always happen when I go to scholar google com If you go to that website you ll notice the black dark webpage menu thing that I m talking about So even though half the screen shuts off and doesn t display properly which is a hardware problem it seems it is triggered by some code which would make it a software firmware problem as well no I tried updating the driver for my AMD Radeon HD video card from the previous version which had been installed by the tech guy earlier today and didn t fix the problem with the newest beta version that was released literally just one week ago this also did not work Neither did the version that was installed with the computer when I bought it brand new as it was the one in use when the problems started occurring My computer is an MSI X - US I know it s along description but any help is appreciated nbsp

A:Screen display problems

The LCD screen probably needs to be replaced... They do go bad
 

http://www.techspot.com/community/topics/screen-display-problems.182628/
Relevancy 21.5%

so hello guys lately ive been getting some problems with my visual not those big problems though some times when I am playing or eighter just roaming the internet or desktop the screen turns black and gets back on and when I turn the pc on at first I hear some wierd noise from the motherboard what does this mean im frying my gfx card? its just a geforce 6200 which is getting scrapped with a new motherboard so just to know the problem
 

A:Screen display problems

Ok, ANY strange noises or high pitched sounds from a PC is something to be concerned with - it could be trouble. My advice, shut down your tower, unhook everything, take it outside & blow all the dust out of it! you'll need like 3 or 4 cans of air (b/c they freeze up bout 1/2 way, need to rotate) or an air compressor w/ the regulator set no higher than 45psi. Once you have the tower cleaned out, get to a very well lit area, or get a bright flash light, expect the system board, graphics cards, any expansion cards, spin fans with your finger, they should spin freely and continue to spin just a bit after. if fans are tight, replace them. on the system board, look for swollen capacitors (they look like little 1/3" barrels sticking up on the circuit boards see image) - specifically around the heatsink of the CPU - this is where the voltage regular is for the system board. if any of the capacitors are swollen, or oozing black or while slimly looking stuff - be wary. if you have a camera, post a pic or two if you find swollen/oozing or questionable capacitors. if you have none, great! if all your fans are spinning freely, great! Just keep an ear & eye out for issues as such. FYI keeping the inside of the PC clear of dust & debris keeps it running cool. hope this helps, take care!
 

http://www.techspot.com/community/topics/screen-display-problems.181583/
Relevancy 24.08%

A friend of mine bought an airtel Huawei EG162G usb stick modem after using it for some months he came to me to report that the modem isnt browsing even though it is connected and the data plan is active. I checked evrything, the only thing I noticed in the diagnostic information is that the MSISDN number is not displayed insted it is displaying unknown.
I have tried to change the firmware by upgrading even downgrading but not working. I even unlocked it so that I would be able to use other types of sim, it's still the same thing. I need someone to put me through on this

Any help will be appreciated
 

http://www.techspot.com/community/topics/huawei-modem-msisdn-unknown.181309/
Relevancy 21.93%

Hello,
Just Built a new PC for the first time however no matter what I seem to do, there is never a display with any monitor I use. I have an
- Asus AMD 880G ATX Motherboard
- NVidia gtx 560 graphics card
- AMD Phenom 2 4x3.4GHZ CPU
- 500w corsair power supply
I have tried all output source available and even removed the graphics card and used intergrated ports, still no signal to monitor.
An help would be great
Thanks
 

A:Just built PC, no display

Ok, assuming everything is powering on as it should with proper connections, is the primary graphic adapter set to PCI-E in the BIOS?
If so, try hooking up the monitor with another system (maybe your friend's) and see if it's working. If it isnt, get it replaced.
 

http://www.techspot.com/community/topics/just-built-pc-no-display.180987/
Relevancy 24.08%

My current video card in my desktop computer is apparently dying I could be wrong but I just haven t been able to figure out what else the problem could be I deleted all drivers and started future buy video card for to and current What setup both over The drivers I had previously were the most current apparently but I reinstalled from a new download I also deleted all Flash and started over and same with Java My display crashes constantly in Firefox and almost always when I try to play a video online Sometimes even when I click on something anything in Firefox bam The screen goes black and the computer is still running IE is not even usable anymore So What video card to buy for both current and future setup I reboot and start over with every crash This has been going on for a couple months I am going to be upgrading almost everything soon I like my old roomy Chieftek Dragon case with lots of fans so I may be able to keep that Below is what I currently have I realize that a video card that will be great for my coming system will not function to its fullest on my current system but if it s just an improvement for now that s fine I don t want to have to buy one now and one later Current system Motherboard - Gigabyte P Titan GA- S FX-L Graphic interface - AGP X X b Current video card - VisionTek ATI Radeon HD put in Memory - GB maxed out Crucial CPU - P CPU Speed - Ghz Power Supply Make Model - Antec Neo HE Watt output Amperage - w ATX V OS - XP Pro up to date Future Intel Core i Ghz already have this and GB RAM What video cards do you recommend for my situation I use this desktop computer mostly as the hub in the home network for graphics photography running Adobe graphics software web design writing and communications home office and general use My laptop is my music recording computer Thanks so much I hope to solve this very quickly nbsp

A:What video card to buy for both current and future setup

Current and Future!

There is no such card.

You currently have an AGP interface and I'm willing to bet your future motherboard will be PCIe.
 

http://www.techspot.com/community/topics/what-video-card-to-buy-for-both-current-and-future-setup.179893/
Relevancy 21.07%

Please help I have an eMachines ET G- w It has a cheap integrated graphics card and I purchased a new Galaxy GeForce GT graphics card along with a Thermaltake TR w PSU yesterday I installed both and powered the 430 upgrading after card a to No display GT GeForce graphics pc up The fans fired up in the PSU the Processor and the new graphics card I had my monitor that I had been using with VGA hooked up with an HDMI cable Now comes the problem I am not getting any picture whatsoever on my monitor No display after upgrading to a GeForce GT 430 graphics card It says no signal and it wont show any picture even at the start up I tried two different HDMI cables I tried a VGA and I tried a DVI None of these made anything appear on the monitor I turned the system off took out the new graphics card removed the new power supply and put the original one back in and tried to fire it up Now I have now picture with my original computer plugged into the original VGA slot I have no idea what to do and I am only a beginner when it comes to installing things into a PC I have asked around and no one had any idea how to solve this problem I don No display after upgrading to a GeForce GT 430 graphics card t want to have to buy a new computer just because I tried to upgrade this one That would suck If anyone could help it would be greatly appreciated nbsp

A:No display after upgrading to a GeForce GT 430 graphics card

What happens if you try to boot up the pc with the new GPU and PSU installed, but have the monitor hooked up to the integrated VGA port?
 

http://www.techspot.com/community/topics/no-display-after-upgrading-to-a-geforce-gt-430-graphics-card.179284/
Relevancy 21.5%

I recently bought brand new parts to build my own PC I had a friend put it together He tested it display won't Monitor PC build new on brand on his monitor and the bios started up fine I took it home and tried plugging it into MY monitor and there s no display The power light is just yellow The monitor is old but I know it works to an extent because my old desktop registers it It s a inch Dell The port on the back of the new desktop is VGA Here are the rest of my computer specs as follows Mobo - MSI Z MA-ED B LGA Intel Z B DDR SATA and USB Monitor won't display on brand new PC build A amp GbE MATX Processor - Intel Core i - GHz MB Cache Socket LGA Memory - Corsair Vengeance GB x Monitor won't display on brand new PC build GB DDR MHz PC -Pin DDR Memory Kit for Intel Core i i i and AMD Platforms SDRAM CMZ GX M A PSU - Corsair Builder Series CX watt Plus Certified Power Supply Compatible with Intel and AMD Platforms ATX CMPSU- CXV HDD - Western Monitor won't display on brand new PC build Digital Caviar Blue GB SATA III RPM MB Cache Bulk OEM Desktop Hard Drive - WD AAKX Video card - MSI AMD Radeon HD G Pcie GDDR Heatsink - Cooler Master Hyper EVO CPU Cooler RR- E- PK-R Like I said he plugged the newly built PC into his own monitor and the bios started up fine Any suggestions nbsp

A:Monitor won't display on brand new PC build

did you plug the monitor into the board or the 6850? Just use the VGA/DVI adapter that came with the GPU and you should be good.
 

http://www.techspot.com/community/topics/monitor-wont-display-on-brand-new-pc-build.179286/
Relevancy 21.5%

Hello everyone, nice to be here.

I have an Asus p6t se and just upgraded the video card to an inno 3d gtx 570 but it wont boot, just gives 1 long and 3 short beeps. I swapped out the video card with my old one and it boots fine. I'm wondering if it's a power issue. On my Inno 3d gtx 570 are 6 power pins and 8 power pins, The box came with a converter for the 6 pins but not the 8 and I'm wondering if I need both.
Any light you could shed would be appreciated.

Thanks
 

A:No display after GeForce GTX 570 upgrade

Yes you need both of the pins connected to the power supply.

What PSU have you got?
 

http://www.techspot.com/community/topics/no-display-after-geforce-gtx-570-upgrade.178329/
Relevancy 23.22%

Hi everyone, I got a new mobo and cpu yesterday and after installing all the parts I put my old hdd in, after the pc boots I got an error; no hard disk detected. i know the hdd is fine because i put it back in my old build and it booted fine, i know when installing a new mobo you should format which ive been trying to do but when i reach the window where you choose the language theres no mouse or keyboard working, and i know the mouse and keyboard is fine because i used both in the boot menu. my current specs are p8z68-v asus intel i5 2500k nvidia 560ti asus corsair 850watts 8gb ram 500gb hdd ps; sorry for poor grammar and spelling mistakes but was forced to write this on my phone. Also, i looked in my bios and it clearly names both my hdd and blu ray drive.
 

A:New mobo doesn't detect HDD, no mouse or keyboard control in Windows setup

First, try the basics. Take out the 560 and just install the RAM, CPU, HDD and PSU and see if you can get to BIOS.
 

http://www.techspot.com/community/topics/new-mobo-doesnt-detect-hdd-no-mouse-or-keyboard-control-in-windows-setup.178133/
Relevancy 24.51%

guys my board only supports xfire and I'm currently sporting a gtx 460 I want to go with a xfire setup and have been offered a hf 4890 or I could sell the card and spend Ł40 more on a hd5770 any ideas as the performance seams pretty similar on both cards
 

A:I want to go with a Crossfire setup

How important is DX11 to you?
 

http://www.techspot.com/community/topics/i-want-to-go-with-a-crossfire-setup.177806/
Relevancy 24.51%

Hey guys. I recently installed my first liquid cooling system. It is currently cooling just the CPU, but I am upgrading so I can liquid cool my two GTX 460s as well. My question is, how? Do I split the incoming water three ways and send one tube to each component (CPU, 460, 460). Or do I go through the CPU, out to the first 460, out to the second 460, to the pump/reservoir, back to the CPU. I ask because I figured the water would be hot coming out of the CPU and it wouldn't make sense to go directly to other parts that need to be cooled. On the other hand, splitting the water 3 ways seems like it would weaken the flow enough that all three parts wouldn't be cooled ver well. So neither system seems quite right. Am I missing something?
 

A:Help with new water-cooling setup

Don't split the flow three ways, keep it going from one waterblock to the next. If you're concerned about it getting too hot on the CPU, then flowing to the video cards, I'd suggest throwing a second radiator inbetween, usually just a single 120mm, then a 240mm or bigger as the flow leaves the video cards. Another option is to create a second loop, with it's own individual reservoir, pump, and radiator, but that adds more expense.
 

http://www.techspot.com/community/topics/help-with-new-water-cooling-setup.175704/
Relevancy 20.64%

Hi everyone In need of help Started up my Dell laptop and I am 1737 2000-0321 display on laptop, Error Dell Blank greeted by a blank screen though the machine goes through the motions of starting up I do not see any faint ghosting When connected to an external monitor all works fine and I have tried changing the inverter but Blank display on Dell 1737 laptop, Error 2000-0321 no luck Ran a diagnostic check and receive the following Error Code Msg Error Code - Msg LCD EDID - Unable to access EDID EEPROM I also tried holding the quot D quot key and powering up The LCD flashed a series of solid color screens Red Green Blue White Black I assume that this means that the backlight is good Does it also mean that the cable is good Not sure what else to check I am guessing that it is eiter the LCD screen controller board itself or the cable Any advice I am comfortable replacing parts Prior to this everything was working fine The display had even brightness and color Would anyone be able to restore my sanity and offer some words of wisdom guidance Would be much appreciated Many Thanks nbsp

A:Blank display on Dell 1737 laptop, Error 2000-0321

Replace the LCD panel including the backlight. External monitor okay, motherboard is okay... Slight chance of a damaged LCD cable to motherboard
 

http://www.techspot.com/community/topics/blank-display-on-dell-1737-laptop-error-2000-0321.176322/
Relevancy 20.64%

Hello. Since a year ago I have been seeing white lines across the screen of my laptop. I have a Sony Vaio VGN-NR430E Laptop. The white lines/band running horizontally across the screen is not permanent, and goes off if point pressure is applied from the top coverside of the screen, or on the face of the screen.

The problem seems like a lose connection but one could not be found when the laptop was opened up.

Do note, that the LCD screen does work and does not go off or black when these white lines take over. Also the white lines are not constantly going across the screen and usually only last for a few seconds. Also when the laptop is hooked up to a TV via a VGA cable, the white horozontal lines do not show up on the TV even when they are on the computer.
 

A:Daily white lines across Sony VAIO laptop display

The LCD panel needs to be replaced. It probably got damaged by excessive pressure on the top of the closed laptop, one too many times
 

http://www.techspot.com/community/topics/daily-white-lines-across-sony-vaio-laptop-display.175542/
Relevancy 18.92%

Yo, all i could think of is to use keyboard menu shortcuts blindfolded, i found instructions from this forum to do so, but only for XP SP1 and SP2, which dont seem to work, i assume because i hvae SP3
 

A:Accidentally disabled display adapter and can't see, safe mode or VGA mode won't work

can you revert to an old save point in system restore?
 

http://www.techspot.com/community/topics/accidentally-disabled-display-adapter-and-cant-see-safe-mode-or-vga-mode-wont-work.176376/
Relevancy 21.5%

i have a compaq presario sr5202hm when i start my computer the screen will not come on it just blinks no input signal on the monitor
 

A:No display after turning on the computer

Well, first things first. Make sure all cables are plugged in correctly, all the way. Never hurts to check.
Chances are you know how to plug in your monitor so we wont spend anymore time on that. Could you give some more details about your system? What hardware are your running? Does the system have integrated video or a dedicated graphics card?
 

http://www.techspot.com/community/topics/no-display-after-turning-on-the-computer.176369/
Relevancy 21.5%

Well I am using asus P5P 800 VM motherboard, 2.53 GHZ intel celeron processor and 1.5 GB ram installed in it.
I have bought an used ATI 9600 AGP card and installed it in my system, it was working good but then I have changed my system's processor and installed an used 3.0 GHZ intel processor.
Now I am having problems with monitors display. Now it is showing yellow lines.
If anyone have the solution please tell me because I am really depressed.
 

http://www.techspot.com/community/topics/display-problems-with-ati-9600.176265/
Relevancy 21.5%

This is happned wen i try launtch NVIDIA Control panel You are not currently using display attached to an Nvidia GPU when i go to Computer Managment gt Divice Manager gt Display adapters gt Nvidia GeForce gt Properties its say divice status is Windows has stopped this device because it has reported problems code And available settings display Nvidia are not when i try launtch World of warcraft its Nvidia display settings are not available say Failed to find suitable display divice I try update all my drivers that not help i try reinstall windows that not help ------------------ System Information ------------------ Time of this report Machine name DOVYDAS-PC Operating System Windows Ultimate -bit Build win gdr - Language Lithuanian Regional Setting Lithuanian System Manufacturer System manufacturer System Model P QL PRO BIOS BIOS Date Ver Processor Intel R Core TM Duo CPU E GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting DPI percent System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Nvidia display settings are not available Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name Manufacturer Chip type DAC type Device Key Enum Display Memory n a Dedicated Memory n a Shared Memory n a Current Mode x bit Hz Driver Name Driver File Version Driver Version DDI Version unknown Driver Model unknown Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d n a WHQL Date Stamp n a Device Identifier D B EE - - CF-B -B DAEC CB Vendor Nvidia display settings are not available ID x Device ID x SubSys ID x Revision ID x Driver Strong Name Unknown Rank Of Driver Unknown Video Accel Deinterlace Caps n a D D Overlay n a DXVA-HD n a DDraw Status Not Available D D Status Not Available AGP Status Not Available ------------- Sound Devices ------------- Description Speakers High Definition Audio Device Default Sound Playback Yes Default Voice Playback Yes Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS FE amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS FE amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Digital Audio S PDIF High Definition Audio Device Default Sound Playback No Default Voice Playback No Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS FE amp REV Manufacturer ID Product ID Type WDM Driver Name HdAudio sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Microsoft HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura ... Read more

A:Nvidia display settings are not available

Bad install, bad driver, or bad card. First try re-installing from the NVidia site download.
 

http://www.techspot.com/community/topics/nvidia-display-settings-are-not-available.176152/
Relevancy 24.51%

Guys Having an issue with setting up a new router on my PC I simply cannot get onto directly from my PC to configure the router I m running XP Pro and router setup with Problem I currently use the Huawei E dongle for internet access I purchased the Sapido GR- router which will allow me to put the dongle in the USB port amp set it as the WAN access I still have the dongle plugged directly into the PC for Internet access at the moment I initially had issues with setting up an IP address getting the xxx xxx issue but have managed to sort that now via PortForward Static IP amongst other things My problem is when logging onto to set up the router it times out most of the time I can ping which is the built in Intel Pro NIC but when I ping sometimes it times out other times it has no problems and other times it will lose packet However it NEVER gets me to the config area the furthest I ve gotten is to the username password screen When running ipconfig all it currently shows up the following Ethernet Adapter Local Area Connection Connection-specific DNS Suffix Problem with router setup Description Intel Pro NIC Physical Address gives MAC Address DHCP Enabled No IP Address Subnet Mask Default Gateway DHCP Server DNS Server I currently have the TCP IP Properties manually configured as when I had the Obtain IP address automatically clicked it would give me the etc address which I believe is a DHCP issue but am not sure at the moment However as it is also a wireless router I can connect to the router config screen via my iPhone and have set the router to DHCP server but this hasn t helped at all Finally the ethernet cable is brand new and when I plug it in out the Network Connection recognises it so I don t think the cable is the issue and have tried different e net ports in case that was an issue I ve reset the router powered on off disabled firewall etc all to no avail At this stage I m completely flummexed I don t have another PC to try it on in case that is suggested Appreciate amp and all help Will P S I should add that both my G and NIC card IP are both Static IP s nbsp

A:Problem with router setup

Have you tried obtaining IP automatically with your iphone? Does the phone get 192.168.1.x address? If it does, you may have a problem with your NIC.
 

http://www.techspot.com/community/topics/problem-with-router-setup.174993/
Relevancy 20.64%

Hello all A few or POST fans display no work, system; and Homebuilt lights but weeks ago one of my friends and I decided to build a PC for my dad we both have minimal experience but my friend has built PCs before I ve helped others design PCs Homebuilt system; fans and lights work, but no display or POST but I ve never physically built one Anyway I checked everything out to make sure it s all compatible technically it should work but we Homebuilt system; fans and lights work, but no display or POST ve run into a few problems After connecting everything to the appropriate terminals and turning on the machine I noticed Homebuilt system; fans and lights work, but no display or POST that all of the fans including the CPU fan were in perfect working order the case LEDs hooked up to the mobo work fine and the mouse and keyboard light up when the PC is turned on However there is no response from the Disk Drive or Hard Drive and the monitor claims there is quot no incoming signal quot All of the hardware is brand new straight out of the box so I m not sure what the problem is Any suggestions are most welcome as I have four days to finish this thing Here are the specs There is no graphics card because my friend informed me that the particular CPU we picked out has HD graphics onboard meaning we wouldn t need a graphics card The monitor is rather old and has a D-Sub connector but it was working well last week and the mobo I picked out is compatible with D-Sub CPU Intel Core i - Motherboard GIGABYTE GA-H M-DS Micro ATX Intel Motherboard Disk Burner ASUS DVD CD Player Burner Tower NZXT Source Elite White Steel RAM G SKILL Ripjaws Series GB x GB Hard Drive II Seagate Barracuda GB Power Supply Corsair quot CX Builder Series quot nbsp

A:Homebuilt system; fans and lights work, but no display or POST

There is no onboard video on that board. Not sure why your friend told you that, cpu has nothing to do with it. You will need to add a graphics card to fix your problem. Here are the board specs.. If you can exchange the board for it's z68 counterpart (paired with your i3) you could than get onboard graphics and not need a GPU.

http://www.newegg.com/Product/Product.aspx?Item=N82E16813128527
 

http://www.techspot.com/community/topics/homebuilt-system-fans-and-lights-work-but-no-display-or-post.175386/
Relevancy 23.22%

I just started getting this error today. I thought it was due to some malware I had gotten but the malware forum tech support said everything looks fine. I get this message right as my VPN is about to authenticate. Can anyone help? This is driving me up the wall!
 

A:Cisco VPN AnyConnect issue: The VPN client was unable to setup IP filtering

What PC hardware are you working with?
 

http://www.techspot.com/community/topics/cisco-vpn-anyconnect-issue-the-vpn-client-was-unable-to-setup-ip-filtering.174986/
Relevancy 21.5%

My old graphics card died so I bought a new one asus 210 silent 1gb ddr3.

I have no display with my new card. I have tried re seating it multiple times with the same results.

I have no on board graphics so I can not get on to my computer to install any new drivers or remove old ones. Can someone please help me.

If you need more information just ask.

Thanks
 

A:Old graphics card died... new one has no display

Adampyne said:





My old graphics card died so I bought a new one asus 210 silent 1gb ddr3.

I have no display with my new card. I have tried re seating it multiple times with the same results.

I have no on board graphics so I can not get on to my computer to install any new drivers or remove old ones. Can someone please help me.

If you need more information just ask.

ThanksClick to expand...

Check if it isn't your monitor that died!
 

http://www.techspot.com/community/topics/old-graphics-card-died-new-one-has-no-display.174087/