Windows Support Forum

old panasonic toughbook

Q: old panasonic toughbook

i have a really old panasonic toughbook with windows xp on it heres the problem:
when i go to my computer it says that my total space on my c drive is 18.6 mb but when i go to my computer it says that microsoft office takes up like 74 mb hows that possible?
also when i try to remove the program i get this error message C\WINDOWS\SYSTEM32\AUTOEXEC.NT The systenm file is not suitable for running MS-DOS and Microsoft Windows applications. close or ignore but when i press ignore it closes it anyways can anyone help?

Relevancy 100%
Preferred Solution: old panasonic toughbook

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 82.56%

I need 3 Toughbook hard drive caddies for a CF-29. I really did not want to pay an arm and a leg for it. The prices on ebay, I think is a bit high.

Relevancy 39.13%

Just got a gift from a friend. A Panasonic CF48E. Put a new HD in it, Installed WIN XP pro, and was happy... NO sound.. Looking at the Control panell, looks like the Multimedia Audio Controller has a ( ! ) in the yellow circle. Downloaded what seems to be the correct drivers for it, ir starts to install but mid installation I get the Blue SOD, that says portcls.sys, and it shuts down, and restarts the laptop real fast ( no time to read what the blue screen says..
Anyone see that problem before?
Any solutions? I read all kinds of suggestions, but none work.
Help please.

A:Panasonic CF-48 E Portcls.sys BSOD

Try here:
Relevancy 39.13%

well, the title says all
my panasonic cd stereo system sa-pm21
"Top Loading CD Player, cassette deck, AM / FM tuner
MP3 Playback with ID3 Tag
CD-R/RW Playback
Full Range Bass Reflex Speakers
Remote controller"
When i turn it off(the press of the button) for example, i am going out of my room(about 5-8 secs after i turn it off) it turns on, but not like a player, it goes like this:
Turns on
Some line goes thru screen and it looks like it is "checking" that all the text is ok, all the text(id3 tag,mp3,tune,vocal,hello,good bye and all this stuff goes on infinitive loop and reshows and reshows. sorry if you missunderstood i will try to make some pics then

Thanks for reading

A:My Psycho Panasonic player

Bump, 3 days waiting
Relevancy 83.42%

I recently bought a used Panasonic Toughbook CF-73. I formatted and re-installed Windows XP. I am unable to find a few drivers, mainly the audio driver. I have tried updating through Microsoft/Windows Update to no avail. I have Everest installed and I am attaching the report. Any help in resolving this issue would be greatly appreciated.
Thanks in Advance!

A:Missing Panasonic Toughbook Hardware

On our toughbooks, we find everything we need on the Panasonic support site. Try starting with
then keep searching on Panasonic support for the drivers you need. There is nothing that is missing from that site, unless something happened in the past three days.
Relevancy 39.13%

Although i can view pictures on a card, i cannot see the screen when taking a picture, it is just black, and when i take a picture, it displays as a black image. Any ideas? Could the lens be broken? Thanks

A:Panasonic Lumix FX10

try and view them in the gallery in the camera, if not try and transfer them off to ure computer with the usb cable, if not it's busted
Relevancy 45.58%

I have a panasonic toughbook CF-R3 and the problem I have is that sometimes it turns on and the times time not. The LED is on and when I push the power button it turns off and if I leave it in the bag a couple of days then it works fine but as soon as I turn off again it will need some days to be able to start again. Very bizzare! Does anyone have any idea.

A:Toughbook won't turn on sometimes

When you shut it off, do you close the lid?

If you do, next time don't and see =over a period of several days if it starts ok.

If it does, then a sticky micro-switch on the close-lid circuit is likely.
Relevancy 79.98%


I have a Panasonic Toughbook running Windows 2000.
I used to be able to run wireless PCMCIA adapters and it worked.

Now when I insert both a Netgear and D-link PCMCIA card the entire system freezes.(after installing the drivers) I pull the card out and the system resumes.Also, the lights on the PCMCIA flash and do what they are suppposed to do.

I can use my D-link wired PCMCIA adapter.

So - it is not the PCMCIA slot - it is not the cards - they both work on other computers. It must be 2000.

Anyone have nay thoughts on what i can try next?



A:Panasonic toughbook - running WIN 2000 - wireless PCMCIA freezing system

Hello Colleen,
you may need to do a fresh install of Win2K... Have you downloaded and installed all the Windows 2000 service packs?
Relevancy 84.28%

Hey missi again, I got so lucky with my dell that I thought I would take a shot at this Panasonic Touchbook. Older laptop, cant find any info on it. Dont have a clue about bios or anything. A friend brought it to me and said see what you can do with it. First time I have ever seen a cd eject out of the keyboard. I do have a model no.CF-61KXF4BAM. Its locked out with a cmos password or something. Any help would be greatful. Im sure its a long shot. Thanks a million missi

A:I have a Panasonic toughbook cf-61 locked out

This is fixable. You may need to open up the Laptop
and reset a jumper temporarily.

Sometimes manufacturers post bios default password on there site.

BTW Welcome to Techspot

I hope you have a very pleasurable stay at Techspot.

Regards Jase
Relevancy 45.15%

Recently updated a Panasonic Tough Book CF-28 from Windows 2000 to XP. The touch screen drivers worked in 2000 but I can't get the touch screen to work in Windows XP. I've tried numerous drivers such as Evio and Fujitsu to no avail. The screen is a Fujitsu but none of the available drivers work. Anyone have any ideas how to get the touch screen back? Thanks in advance!!

A:ToughBook CF-28 Touch Screen

install winxp tablet edition
Relevancy 39.56%

Hello i would like to know if there is anyone that could tell me how to fix the following problem.

My LCD screen on my P3 CF-72 has a line across the screen, at first i though it was dead pixels but then it moved.

Bad connection maybe? Thanks for any help- if you need anymore detail i will post later, i am in a rush now.

A:Panasonic CF-72 LCD Problem

It could be interference, but its more likely that you are trying to use a screen resolution or refresh rate that isn't fully supported by your flat panel.
You will need to read its manual and adjust your resolution according to what it says.
Relevancy 38.7%

People, please help me to solve the tiny problem: one-year old Panasonic s35 DVD player works in black&white mode only. All the settings are ok. Have no idea how to solve this Maybe because of old TV by Philips?

A:Panasonic DVD player refuses to work right!

sometimes u just have to take some dust out of the lense...

happens to me all the time, and it works fine after
Relevancy 38.7%

So I opted for onboard sound for the lady.

I connected the computer's REAR OUT to the receiver's Game/Aux IN via a mini stereo headphone to stereo rca's goldplated cable from Radio Shack. I'm getting a sound from the speakers that she describes as a "mind numbing buzz," anytime the receiver is set to Game/Aux.

I've seen answers for those experiencing similar problems with their stand-alone sound cards, but no answers for the stressed out parents of AC'97s.

Please help.

:rolleyes: :wave:
Relevancy 38.7%

SW-9583-C (Non-cartridge)
SW-9573-C (Cartridge & Non-cartridge)

Where can I find these drives in the US?

A:Panasonic Super Multi DVD Burners
Relevancy 38.27%

i have panasonic camcorder having model nv-mx7den. i need it`s driver to connect it with my computer.Could anyone here help me, or fine somewhere I could actually download the driver? I've also tried several websites that say download from here! I click all there different "mirrors" and links. They all just lead to the panasonic websites with an error "not available".
thanx in advance.....

sumit singh

A:I can't find my Panasonic camcorder nv-mx7den driver

Whoa ... is that model even sold in the USA? I am seeing a lot of references to India? o_o
Relevancy 38.7%

Is there anybody out there that can help me get back my saved recordings from my Panasonic DMR-EX99V
hard drive recorder? I accidentally FORMATTED it.
I have taken the hard drive out hoping that I can UNFORMAT it using Easeus Data Recovery software on
my computer but the drive is not recognized although it knows a new drive has been plugged in.
I am running Windows 7 Ultimate

A:Need help retrieving recordings from a Panasonic recorder

Easeus won't "unformat" the drive. All it can do is copy the files from the drive onto a different HDD.

The problem you are likely having is that the Panasonic does not use a Windows supported file system. Thus Windows (and Easeus) cannot read the drive.

It could be a Linux format, or it could be some proprietary format. Neither of which Windows will be able to read.
Relevancy 83.42%

i recently instaled win 7 ultimate 64 x
downloaded drivers from panasonic but i am unable to see wi-fi conections or to instal intel network lan driver
sry for my engl
for the last 12 h i am working on this crap laptop
Relevancy 37.41%

Hi there.

Panasonic Matshita UJ272 Blu-Ray Internal Burner Bd-r/RE XL 100 GB Drive for Laptop with SATA Connection and Ultra Slimline 9.5 mm Drive Bay

Anybody tries these yet --I'm particularly interested if they will fit into 9.5inch small form factor used on those small cube boxes such as micro servers / NAS boxes etc etc).

DVD isn't yet totally dead and this seem a neater solution than kludging around with external drives. OK it's not cheap compared with standard larger models but it WRITES and is small form factor.

Any drawbacks with this device. It's also TRAY loading - always IMO better than Slot loading. I can change the Bezel too if need be.

Relevancy 39.13%

I made a short 17 with my handheld Panasonic video camera and when I connect it to my laptop, I can't open the AVCHD file??? I need to copy it to a CD and I'm under a time sensitive deadline. Can anyone help me?
Relevancy 38.27%

I cannot down load videos to my Anchos cobalt 80 android. It downloads ok to my p.c but not to my android. Any sugg3stions.
Relevancy 37.41%

Panasonic AG-AC is a professional AVCCAM HD camcorder combining the high Panasonic MTS for post-production iMovie 11 Import to 1080p60p AG-AC90 image quality advanced functions and easy operation in a stylish easy-to-handle design Recording videos in AVCHD format the Panasonic AG-AC captures native x resolution images and records in p i p and p as well as in standard definition i in Hz However the AVCHD format is not Import Panasonic AG-AC90 1080p60p MTS to iMovie 11 for post-production a compatible format for some common editing systems on such as Avid FCP and iMovie So if you want to import the p p MTS to Import Panasonic AG-AC90 1080p60p MTS to iMovie 11 for post-production edit in iMovie for post-production you often struggle against compatible issues You know iMovie is popular video authoring Import Panasonic AG-AC90 1080p60p MTS to iMovie 11 for post-production tool to edit video clips from camcorder on Mac iMovie is the latest version with it you can import video clips from external devices or from anywhere else The problem is you often get errors from iMovie when importing some raw MTS files to iMovie You try everything but the MTS clips just cannot be read and recognized at all Aunsoft MTS Converter for Mac a professional MTS conversion tool transcode MTS M TS to compatible video format for common media players popular portable devices and editing software With Aunsoft MTS Converter for Mac you can import the p p MTS in iMovie on Mac fast and easily Here are steps Step Load AG-AC p p MTS to MTS Converter for Mac Launch Aunsoft MTS Converter for Mac import MTS files to it Click quot add video which can only add one file a time You can also drag and drop MTS files into it directly Step Select quot iMovie quot the output format Just click quot Format quot icon choose the quot iMovie and Final Cut Express- gt Apple InterMedia Codec AIC mov as the output format Tips If you need to combine several MTS files check the quot Merge quot on the main interface of the app Step Set audio and video profile Click quot settings quot to adjust your audio and video Set audio and video profile in your Panasonic AG-AC p p MTS you will get the output compatible AIC MOV according to your need for post-production in iMovie Tips The proper Frame Rate Bitrate Size and other settings setted by default to keep high quality of your audio and video Step Start convert p p MTS to iMovie on Mac At last click the quot Convert quot icon to start converting Panasonic AG-AC p p MTS to iMovie What s more Aunsoft MTS Converter for Mac can help you do more Convert p AVCHD files to Apple Intermediate Codec for FCE Make MTS and AVCHD files smoothly burned in iDVD

A:Import Panasonic AG-AC90 1080p60p MTS to iMovie 11 for post-production

I use iDealshare VideoGo to convert MTS to iMovie supoprted MOV, MP4 or DV format. Step by step guide at It also helps to convert nearly all kinds of video formats like MOV, AVI, WMV, MPEG, FLV, MKV, OGV, 3GP, MXF, WebM, AVCHD, MTS, M2T, M2TS, TOD, SWF, MVI, ASF, MOD, XAVC to iMovie; It even can act as an inbuilt editor: trim, crop, merge files into one, split by chapter, rotate, adjust sound volume, add or remove subtitles, add effect/watermark to video files, adjust video/audio bitrate, codec, channels, frame rate, sample rate, resolution, aspect ratio and etc
Relevancy 45.15%

I have 2 CF-19 one Mk1 and the second Mk2.
The problem is that both don't recognized the PCI Express card, however, it is recognized in my Fujitsu laptop with Win XP no problems.

Can anyone please shine some light on this problem? I have installed all drivers from Panasonic site to no avail.


A:PCI Express card on Toughbook cf-19

Hmm, that is indeed strange as, "Panasonic incorporates ExpressCard/54 slots in all the fully rugged and semi-rugged models of their Toughbook brand of laptop computers."

Is there some setting in BIOS that isn't set right?
Relevancy 39.13%

I am making some yoga dvds using image mixer3 for panasonic.
When the dvd's are less than 65mins they write into disc. For my longer dvds - 75min ones- I have bought printable dvd+R 8.5GB (double layer, single sided) however image mixer fails to write. The writing starts normally and everything looks to be coming along just fine then at some point it stops writing, ejects and the messege is "fails to write" (or something similar)
I really want to record some longer dvds(75mins)- I have tried and tried but am stuck. I need help
Jackie - good at teaching yoga - hopeless with computers!

A:image mixer 3 for panasonic

What is the make and model # of your DVD burner? Is it a Double Layer (DVD9) burner? What are the brands of blanks? What is the burn speed you are using to burn DVD's? Are the blanks DVD+R, DVD-R or DVD-RW?
Do not use generic blanks. Use only named brand blanks. (Phillips, Sony, TDK etc) I have most luck with -R blanks and not the +R discs. -+RW discs are harder to work with because they have to be formatted before they can be used and they need to be finalized before they can be ejected. You should burn at the slowest speed for your media. Burning at too fast of a speed will fail the burn or make it so it cannot be played without skipping.
Relevancy 83.42%


have a Panasonic Toughbook CF-51RCLDFBM.
I bought new hard drive 160 GB PATA 2,5 inch and start to install WIN XP.
When I choose which hard drive want to install system on , getting message that hard drive cofiguration is wrong and ......
There is no setting in BIOS for hard drive. Hard drive is visible in BIOS.

60GB hard drive working ok.

Dont know whats wrong. IS this computer need BIOS updates or I don`t know.

Can anyone help ?


A:New Hard Drive in Panasonic toughbook CF-51

Go into BIOS and make sure BIOS has configured the drive set it to Automatic and that it shows the headers sectors and LBA.
Relevancy 38.7%

I am trying to reimage a computer for a client. Our image runs on ATA drives but the computer is currently in in SATA mode. There isnt any options in BIOS for me to change it. Is there any other way?

A:Cannot change SATA mode on Panasonic CF-74

If there isn't a SATA or Hard Drive option in the Bios to change from AHCI to Computability Mode, Legacy or EIDE, then you will need to slipstream the motherboards SATA driver into your XP build using nLite.
Relevancy 39.13%

I can capture vhs tapes and make a mpg file on my hard disk. Once it is a mpg file, I can import in into Pinnacle Studio 10.8. I have on my motherboard firewire input/output capability but even though it sees my Panasonic dvr, I get the yellow "i" and it it is looking for a driver which Panasonic doesn't supply. I prefer using my external dvr recorder not my internal dvd writer because on this Panasonic DMR-ES25, I have the ability of getting almost dcvd quality in 4 hr. mode and I would like to combine many vhs tapes to make 8 gb files before burning.

Any suggestions will be appreciated.
Relevancy 39.13%

I am trying to figure this out because everytime I put in a DVD+RW into my DVD +-RW drive I get an error to please insert a blank disc. Am I am using the right disc? Does anyone have suggestions?


A:Imagemixer 3 for Panasonic camcorder

Hello Elizabeth, Welcome to TSF!

There are a couple of ways that might help you with this issue.

Method One: Remove the registry entry

Warning: Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system.

Please Note: If you had installed multiple CD-writing software products on your computer, you need to uninstall the software products before you remove the registry keys.

1. Click Start, and then click Run.

2. In the Open box, type regedit, and then click OK.

3. Locate and then click the following registry subkey:

4. On the File menu, click Export.

5. In the File name box, type savedkey, and then click Save.

6. Click the REG_MULTI_SZ data type UpperFilters, and then click Delete on the Edit menu. When you are prompted to confirm the deletion, click Yes.

Note: If this data type is missing, go to Method 2.

7. Click the REG_MULTI_SZ data type LowerFilters, and then click Delete on the Edit menu. When you are prompted to confirm the deletion, click Yes.

8. Quit Registry Editor, and then restart the computer.

Method 2: Replace the existing driver

1. Click Start, and then click Control Panel.

2. If Control Panel is in Category view, click Performance and Maintenance, and then click System.

If Control Panel is in Classic view, double-click System.

3. On the Hardware tab, click Device Manager.

4. Click the drive with the question mark (?) next to it.

5. On the Action menu, click Uninstall. When you are prompted to confirm the removal, click OK.

6. Repeat steps 4 through 5 for any other drives with question marks.

7. On the Action Menu, click Scan for hardware changes.

Close all windows and reboot the computer.

Please give these two methods a try and post back with the results.

Kind Regards,
Relevancy 84.28%

Hey Techcats

I have been searching for a resolution for a while and figured i would shoot to the forums. I have a newly formatted CfC1 mkII toughbook with windows 7 64bit operating system and I am unable to connect to the internet... this is vital because I am trying to update my drivers. I have gone through and downloaded the lan, modem and wireless options to no avail. So if anyone can find a thread or has an answer please get at me.


A:Panasonic CF-C1 toughbook Internet

and welcome to the Forum

Please post a screenshot of Device Manager with the Network Adaptor group expanded. . see the link in my signature for how.

How do I get into Windows Device Manager?
Relevancy 37.41%


I am trying to get my Panasonic Digital Video Camera NV-DS15B to connect to my Sony Vaio laptop running on Windows 7.

It doesn't automatically recognise the camera, merely states that it is an unknown device and windows has stopped it as it is not working properly.

I have searched the Panasonic website, but the camera seems to be too old to have a driver available for download.

Doing an online search, there seems to be people who have managed to get some kind of generic software to make it run, but equal numbers don't. Before I make some kind of mistake, I would rather have TSF expert advice.

Thank you.

A:Drivers for Windows 7 to recognise Panasonic NV-DS15B Digital Camcorder

The owners manual (pg 87) says that a Personal Computer Connection Kit is required
(try this link: )

If it doesn't work, get page 87 from this page: Support - Downloads - Panasonic UK & Ireland

I had a similar problem with my Panasonic video camera (even older than yours - it uses VHS tapes). I had to get a TV card (mine was from Hauppage) and video converter (from Radio Shack). Then I played the video in a VCR (using the Panasonic VHS adapter), through the video converter, into the TV Card - and recorded that way.

If yours is able, you may be able to skip the VCR step and go straight through the video converter to your TV card.
Relevancy 38.27%

Hi, I am new to this but I have had for several years two panasonic cameras one NV-DS28 and one NV-DS65 both of these worked fine with the software DV Studio that came with the cameras. I had at that time xp but I have now purchased a new tower and it is Windows 7, I have installed a new firewire card and lead but the computer will not show any signs that either camera is connected. I purchased another firewire card just in case that was the problem but still nothing I contacted panasonic and they informed me that dv studio is not compatible with 7 but Windows Movie maker will pick up the cameras BUT IT DOESN'T. I have tried everything that I can think of but still nothing not even an error code. I hope someone out there may be able to help. I have looked for update driver ETC.

A:Computer not recognising panasonic NV-DS65 Camera

You need Windows 7 device drivers for the Panasonic cameras. I am unable to find any at Panasonic Support.

What drivers have you installed for them?

Any red/ yellow flags in Device Manager?
START | type devmgmt.msc

Regards. . .


Relevancy 38.27%

Recently my television which I use as a second monitor stopped working.
I'm not sure what event caused it to stop working.
The television is still detected by my graphics card, as in it shows in the Nvidia control panel. Windows mobility detects a monitor but the tv has a black screen and dosnt detect any input. I had my friend attempt to connect to the tv and he had some issues but was able to get it to work by not having it as a duplicate desktop.
Ive attempted to reset the tv to default settings; rolled back graphics card drivers and updated them. Ive done all the basic generic **** like restarting and checking the plugs.
PS. HDMI connection

Asus F50Sf
Intel Core 2 Duo P8700
4 gigs of ram
Vista service pack 1
NVidia GeForce GT 200M
Panasonic TV 0150-0010

A:Panasonic Television Black Screen Issue

Have you tried using a different HDMI cable?
Relevancy 39.13%

I have a vidoecam suite 2.0 for my panasonic camera. I am having problem importing the video to the computer. I am running on vista home edition. Do you have any suggestion as how to fix this problem
Relevancy 38.7%

I follwed instructions re installation of software for camcorder and downloaded updated software for MS Vista (for Image Mixer 3). Computer doesn't recognise that camera is connected to computer - anyone know what the problem might be?

A:MS Vista and Panasonic Camcorder SDR-H250

Problem solved!

Faulty connection to computer.
Relevancy 39.56%

I have a new Laptop with Win 7 Ultimate. I cannot find any Driver for my Multi-Function Station Panasonic KX FLB751 for Win7 at the Internet. Does anybody knows a solution for that.

A:Win 7 Driver for Panasonic

Try here :
Remember - Google is usually your friend !
Chris Cosgrove
Relevancy 46.44%

ok i just got a panosonic tough book cf-18b thats the one with the tablet mode touch sreen stuff well hear is my question i instaled win xp profesinol on it not the tablet version im haveing torouble geting some of the drivers and also ami gona be able to make the touch screen work without having tablet edition i think from what i read i can but any help or opinons would be great.

thanks in advance
Relevancy 38.7%

ok i cant get past the old log in so im gona format were can i find the original disk for a panosonic cf18 and also it has no cd rom so i dont knwo how i can reload the software unless i stick it in a laptiop that has a cd rom also if any one has any ideasi knwo dell has a factory reset partition that you can accsess bye hiting ctrl alt f11 but im not sure about panosonic so any help would be great

A:windows xp tablet for panasonic cf18

You need to make sure your BIOS has a boot to USB in the first boot device list and a portable CD drive
Relevancy 38.27%

ive got a panasonic th- px b amp i connect my samsung r laptop via hdmi cable to watch movies i download watch films via vlc media player but screen flickers when ive got to a panasonic r610 a laptop connecting samsung tv it set to hz its got on the connecting a samsung r610 laptop to a panasonic tv back of my tv that its hz i have to put the hz via my laptop settings to hz but i then loose my p settings another problem i have is watching blurays amp dvds via corel windvd amp cyberlink power dvd it starts off from the menu perfect but when the film starts i loose the picture on the above tv but still have sound on my tv my laptop has a blu-ray rom built in as standard any help would be greatly appreciated thanks specs on tv amp laptop are as follows TH PX Full Specifications Display Screen Size Screen Aspect inch cm diagonal Panel G Progressive HD Plasma Display Panel Number of Pixels x pixels Applicable PC Signals XGA SXGA compressed Displayable Colours Max billion equavalent colours for darker part Contrast Ratio Max TV Tuner Tuner Integrated Yes DVB Digital Tuner Yes Tuning System PLL synthesizer -position auto-search tuner Broadcast Stereo Reception NICAM FM Fastext P Level FASTEXT LIST TOP Receiving System PAL -I DVB AV-NTSC PAL- NTSC M-NTSC Sound Speaker Full-Range x Audio Output W W x percent THD Ambience Yes Terminals HDMI x PC Input Mini D-sub -pin x rear Audio Input for PC RCA phono type connectors L R set rear Component Video Input RCA phono type x Y PB PR rear Audio Input for Component Video RCA phono type connectors L R set rear Audio output RCA phono type connectors L R set rear General Power Supply AC - V Hz Dimensions W x H x D Without Stand - x x Aspect Controls Panasonic Auto Zoom Zoom Zoom Multi Window PAT Screen Saver Wobbling Technical Specifications Samsung R - G www samsung com us CPU -GHz Intel Core Duo T Operating System MS Windows Vista Home Premium RAM GB RAM Upgradable to GB Hard Drive Size GB Hard Drive Speed rpm Hard Drive Type SATA Hard Drive Display Size inch full p Native Resolution x Optical Drive DVD -RW R DL bluray Optical Drive Speed X Graphics Card Nvidia M GS MB Video Memory MB Wi-Fi b g n Bluetooth Ports excluding USB Ethernet HDMI Headphone Kensington Lock Microphone Modem VGA USB Ports Card Slots - card reader ExpressCard

A:connecting a samsung r610 laptop to a panasonic tv

i have to put the hz via my laptop settings to 30hz but i then loose my 1080p settings.You do not have 1080p on your TV, it its HD settings are only for 720p and 1080i. set your TV to 720p and lower the Resolution on your PC.Whats your screen resolution currently on your laptop, if its the Native Resolution, its bigger then your TV can view, you need to make your resolution smaller.(1,024 x 768) TV 720*(1366x768) PCAlso, check your TV settings, look for where it says the screen resolution, you can change it from 1080i to 720P (i)interlaced (p)progressive. You might also be able to change the refresh rate, it should be 60hz,This will help with the flickering.Also, make sure your laptops screen saver is activated, you dont want to accidently leave the screen on your TV being its a Plasma and burn the image in.
Relevancy 33.54%

I was given a Panasonic TX- P H Tv by a family friend because it was surplus to requirements After I set it up I noticed the i badge on the front of it so i went and set on displaying Panasonic not 360 1080i Xbox TX-47P600H 1080i my Xbox to i and run it through the component cable When running on p it is low quality and it makes seeing any subtitles or in GTA V text messages very difficult When I put the cable into HDTV mode the image gets extremely distorted and shows no detail 1080i Xbox 360 not displaying on 1080i Panasonic TX-47P600H when the component cable is set to HDTV which I know for a fact can run i I have tried changing the settings on the xbox to work with the TV but nothing so far has worked I did read that someone had a similar issue and they managed to find a fix but there are no details on how said person achieved it And thoughts ideas or material you need just say Many thanks Weave Works normally Normal Low Quality Settings on Xbox with NON HD running through component cable This is what it shows Nothing when set to i HD This is the actual image that should show the account selection screen after the console is turned on Only displays when a tv setting is showing Scan Mode Edit Added Photos nbsp

Relevancy 84.28%

Hey I have a Panasonic Toughbook CF- My friend CF-19 Panasonic Reformatting Toughbook thought he would do me a favor and put Windows Ultimate on it I constantly get error messages and at the bottom of my desktop screen quot Windows Build This copy of Windows is not genuine quot I have a feeling this version of Windows is too much Reformatting Panasonic CF-19 Toughbook for my CF to handle anyways Problem being I m not too sure on how he did it or how to reformat it myself So How would I go about wiping this computer and then find a way to use the sticker on the bottom of the tablet which says quot Reformatting Panasonic CF-19 Toughbook Microsoft Windows XP Tablet PC Edition Panasonic quot Product Key xxxxxx Maybe an easy way out is to buy a product key and downgrade Hmm Any help would be great I have a research paper due and instead of buying a new laptop- I decided to fix this one Hah hope that wasn t a bad idea Speak kindly in your tech lingo please I will do my utter best to keep up nbsp

A:Reformatting Panasonic CF-19 Toughbook

Use the techguy utility to give us the specifications. From what I've been able to garner from Google and using the search Toughbook CF-19 , it should be able to support Windows 7 and should have had it as default, not the tablet version.
We need more details that the utility will reveal.
Relevancy 46.44%

Got a sweet little needs OS Toughbook Panasonic toughbook for hubby but Toughbook needs OS no OS installed It is old and used Specs as best as I can tell Model CF M VHFZDM Serial JKYA CPU Type Mobile Intel r Pentium r III CUP - M MHz CPU Speed MHz BIOS V L Embedded Controller V L System Memory MB Primary Master GB Touch pad enabled Display Simultaneous Environment Normal Temperature Serial port A serial port B Touch screen parallel port Modem Legacy USB support All of these are enabled Mode ECP Password is enabled but not set Boot CD Drive there is not one HDD Floppy drive there is not one LAN When powered on screen displays Intel UNDI PXE- build Copyright - For Realtek RTL X X PCI Fast Ethernet Controller v PXE-E Media test failure check cable PXE-MOF Exiting PXE ROM Operating system not found My first step was to take it to my local guy amp have him fix this for me He basically said it would take too much money which I interpret as too much of his time Second step was to connect CD drive and attempt to install OS XP Same message I don t think it recognized the CD drive Third step was to have toughbook boot from LAN with cable connected to my notebook I never said I was smart but but at least my notebook didn t crash I got this message CLINT MAC ADDR D C GUID - - - - D C PXE-E No DHCP or proxyDHCP offers were received PXE-MOF Exiting PXE ROM Operating System not found Fourth step research which was also my between amp step I found a link that described how to install OS w o cd floppy but it was a bit overwhelming I probably could manage this but am too timid to go it alone http www syschat com install-windows-xp-without-floppy-cd- html Is there a kind soul out there who will talk walk me through getting this toughbook to work I am capable of opening it up and doing quot stuff quot I would just like to have someone who knows a bit more ok ok a whole lot more about computers than me to help Thanks for any feedback I know it s Christmas season amp I myself have to work but if you get bored with all the new toys well thanks anyway nbsp

Relevancy 39.13%

When I try to import video files from my Panasonic SDR-H200 video camera to my PC using ImageMixer 3, I get an error message which reads, "IMxBrowser.exe has encountered a problem and needs to close blah, blah, blah" The error signature shows, App Name: imbrowser.exe, App Ver:, Mod Name: imbrowser.exe, Mod Ver:, Offset: 0002f885.
If I try to use different software to do the same job it indicates that my video camera is not detected, any ideas?

A:ImageMixer 3 for Panasonic problem

It would appear that my recently installed Kaspersky I.S.7 was causing the importing problems. I temporarily suspended Kaspersky and everything worked beautifully.
Relevancy 39.13%

On start-up, my Panasonic CF-27 Toughbook displays a red backround message that reads:

Save to Disk file not found
Save To Disk feature is disabled

I have looked in the BIOS through the F2 key for Setup, but I cannot find a suitable change to overcome this message.

Can anyone tell me how to correct this?


Relevancy 38.27%

I cheked the site of panasonic and i didn't found the driver for AMUST P-88 matrix printer could you pls. help me it's an old model.

A:where can i download the printer driver for AMUST P-88 PANASONIC

I dont think you are going to be very lucky with this one,Ive just searched for over 30 minutes looking for obsolete printers whatever but have come up with nothing so far,I'll keep looking but not holding my breath,lets hope someone comes forward to help ........
Relevancy 39.56%

Does anyone use the Panasonic Broadband Router? I have tried everything I know to do to get it to work with WinMx. I use XP but the firewall is turned off. I have mapped the ports and entered that info in the setup of WinMx. No luck. Can anyone help?


A:Panasonic Router

Hiya and welcome

What is the full version of the router? There are a few FAQ's jotted about the Web, so may take some searching.


Relevancy 39.13%

I have a camera that has been having SD card problems. Sometimes when I put a card in, it says "insert SD card again". I reinsert it until it says "try another card. If I push it back and forth in the slot, it will sometimes work.

Relevancy 38.7%

I have a new Panasonic DMCZS25. On my older Panasonic camera--video was on the scan disk and easily downloaded to my computer. I can't even find the videos. I looked at the manual but it is like greek to me! HELP please. I am so unhappy that they have made this so hard. Thank you!
Relevancy 38.7%

the intelligent auto setting on my Panasonic DMC-TZ4 camera doesn't work. I get a message to turn off and on the camera but that doesn't help. All the other settings to take photos or video work. I tried the intelligent auto setting many times over a several week period without success and then it worked briefly again yesterday, then I heard a big pop sound and it stopped working again. All other settings are fine. I was thinking of taking the camera to a local repair person, but wanted some sense first of what the problem might be and whether it was repairable.

A:Panasonic DMC-TZ4 intelligent auto broken

Anytime a camera snaps, crackles, or "pops!" it sounds likes it needs repair.
Can it be repaired? I'd say yes, as almost anything can be repaired. But is it worth the expense?
To get something as intricate as an electronic camera repaired I'll bet it is going to cost at least $100, and you can get better cameras than this 8M pixel for not much more than this already. Even some cell phones get that range of resolution. Wait another couple months and 13 to 41M pixel camera phones will be common.

Get rid of this paperweight.
Relevancy 39.13%

When I download movies taken on my Panasonic DMC-TZ4, the file extension is .MOV. According to the camera manual and your FAQs QuickTime should be able to play this type of file. But, when I try I just get weird colored patterns (the audio works). I updated my QuickTime to the latest version. Any advice?

Relevancy 37.84%

Cannot transfer videos from Panasonic Camera DMC-Zs20 to my PC using Photofun I have a Panasonic camera DMC-ZS20. After installing the Panasonic software PhotoFun, I can only transfer pictures but NOT videos from the camera to my PC.

Can someone help please? It's really annoying!
Relevancy 37.84%

I have a Panasonic camera DMC-Zs20. After installing the Panasonic software PhotoFun, I can only transfer pictures but NOT videos from the camera to my PC.

I have no problem do the transferring for both pictures and videos with my older model of Panasonic camera. My PC is Fujitsu S6510 with operating ssystem Windows XP.

Please suggest what I can do to fix the problem.


A:Cannot transfer videos from Panasonic Camera DMC-Zs20 to my PC using Photofun

If the videos are on a memory card, buy a card reader which accepts the type of card your camera uses. Plug the card reader into a USB port on your PC (no external driver is required as Windows already has a generic driver for it).

Now remove the card from the camera and push it carefully into the appropriate slot on the card reader. You should now be able to open a window showing the contents of the card, and you can copy'paste the videos to your videos folder or wherever you want. Doing it that way means you don't need the PhotoFun software at all for transferring files from the camera.

Using a card reader is so much easier than fumbling about with your camera and a cable to connect it to your PC.
Relevancy 38.7%

I have a new Panasonic TZ20 and put the old 4Gb DC memory card into it, that I
used for my older, now defunct, TZ7. Every time I switch the camera on, I get a
message on the screen "This card is not formatted with this camera, and not
suitable for movie recording".
It actually works after that and I don't take movies, but it is irritating to get this
message. Why do I get it, and what can do to pevent it?

A:DC memory card Panasonic TZ20

have you formatted in the camera ?
Relevancy 39.13%

Hi i have a panasonic NV-GS27EB camcorder W/tape I dnt have a firewire port on my pc but i bought a 4 pin firewire to usb cable to connect the camera to my pc but it doesnt recoqnize the device i recon i need the drivers but i wasnt supplyed a drivers disk, Im running win7 any help would be appreciated its startin to annoy me cnt find drivers anywere.

regards LAMY

A:panasonic camcorder issues

the firewire to usb do not always work

whats the make and model of the PC - do you have an express slot or pcmcia slot
Relevancy 38.7%


When I turn on my camera (LCD Mode) & try to view photos already stored in memory, the display shows a bunch of Vertical lines throughout each frame, and the picture shows up "greyed out" in the background. It's as if a layer of vertical stripes was put on top of each photo.

Any suggestions how to re-set my camera so it properly shows my photos?

Thanks in advance!

A:Panasonic Lumix DMC-FX3 -- Display Issues

Do they show properly if you take the chip out and use a reader?
Can you transfer the pictures correctly to your computer?

I wouldn't do anything rash like...reset the camera to default... until the pictures are saved somwhere.
Relevancy 39.56%

I ve just been given a Lumix G Naturally the accompanying manual hardly helps with any of the functions so I uploaded the pdf manual - G3 lumix panasonic all pages of it I ve printed out panasonic lumix G3 some of the pages which seem to be the most relevant but since there s no search facility I may have missed some crucial explanation My real problem is I only know how to take a basic picture on the camera and even when trying to follow the instructions I find they aren t detailed enough I don t know how to zoom in other than twisting the lens which has a very limited action and I don t know how to turn on flash Plus lots of other things The other problem is that my eyesight isn t good so trying to see what the icons are in the so called manual is next to impossible Does anyone know if there s an easier more explanatory manual available I ve Googled it but come up with nothing nbsp

Relevancy 37.84%

HI, I cannot delete images from my media card on my Panasonic ZS3. Any ideas? I hit delete, nothing. Either on hard disk on computer or card. Right clicking has no delete option. Any ideas? Very strange...

Relevancy 38.27%

Can any one who have Panasonic LUMIX camera tell me what is the folder containing the videos because I think the folder is somehow hidden in my camera. I can see the videos in the camera but I don't see them in the memory card.

A:folders inside Panasonic LUMiX camera


Actually it won't hide the folders by default.
How many folders in your SD CARD can you see? And what are they? Have you used the card reader or directly plug it in your PC? Whether you checked all the folders?
Relevancy 39.13%

Unable to download pictures from my new panasonic lumix camera. Using a card reader.

A:Download Panasonic Lumix

do you know if the card reader works - it should just find the images on the card - they maybe in a subdirectory - what happens if you use windows explorer and browse to the cardreader ?
Relevancy 39.56%

Hi i am about to buy a Panasonic DMC FX 77 compact which has a touch screen .. ive never had a touch screen before and would appreciate any comments regarding the benifits or even draw backs of a touch screen and wether im doing the right thing .. its a big touch screen on the FX 77 and vitually fills the entire camera back .. thanks for your help and comments .. Michael

A:FX 77 touchscreen < Panasonic >

I didnt even know touch screen cameras were avalible. I would suggest you go try it out in a store setting. If it is really compact I can see big fingers being an issues- as they can be with smartphone keyboards. Otherwise at this point I wouldn't sink much money into a digital camera seeing they are dirt cheap these days. the next technology is the consumer friend dSLRs which are more compact than a traditional SLR. but they have interchangeable lenses. I'd be looking for them to drop in the next couple years.
Relevancy 38.7%

i have this camera for some 2 month. so far with no problems.
the last pics i took are ok to see on my computer, yet, the video films cannot be played on my pc since i get a message stating that the file cannot be read.

on top, today upon turning the camera on there is a messege that the pics will be recorded on the internal memory only. the camera cannot playback any pics [still or video] from the sd card.

the same problem exists with other sd cards inserted into the camera.

the same problem exist after formating the sd card.

turning the camera off and pulling the batery out did not help.

so, at the moment, my brand new camera is limited to some 6 low quality pics...

any help will be appreciated



A:panasonic lumix DMC ZS7 sd card problems

Hi Oran,
two issues here.
1. The videos you take on your camera are in a format your PC does not currently support. If you check this review of your camera near the bottom of the first page it talks about opening and converting the AVCHD Lite videos:

2. It sounds like the SD card slot is not picking up the SD card properly, hence why you can't see or play back any videos or pics from the card. In my Lumix TZ6 the card goes in so far, then there is a bit of a bounce as it clips in. Are your cards doing this? If so, and if they are not being picked up, I would take the camera to a repair shop as the SD slot may be damaged.
Relevancy 38.27%

I have a Panasonic Lumix DMC-FZ35 camera and I just took a video on it but I can't download it onto my computer, it doesn't show up. The pictures I took show up as downloaded but I can't locate the video anywhere. Help?

Relevancy 39.13%

Hi Guys.

I have a Lumix DMC-FZ5. When I turn the camera on, the zoom extends and I can operate the shutter button. However, nothing else works. The battery is fully charged. I would appreciate any advice.

Many thanks!

A:Panasonic Lumix problem.

I think that is the same model as mine. There is a mode that you can turn on and off to use the built in viewfinder only. If that is turned on then you can't see anything on the crystal display and it will appear that your camera is not working. It's a small button above the crystal display that you just press and your camera should work normally.
dvr surveillance system
Relevancy 39.13%

Hi, I bought the Panasonic Lumix DMC-FZ35, it is very convenient but I find that a lof ot pictures come out blurry if there is even a very small movement, can anyone tell me how to configurate it or what to do to avoid this?

Relevancy 37.41%

Hi, I have a panasonic DMC-ZS7 LUMIX digital camera. I have been using the same two SD cards in it for a few months now. But the other day after transfering my pictures from my camera to my computer, I took out my SD card to replace it with my other one. But now everytime I put in my SD card it says 'insert SD card again'. When it says this I cannot access my cameras menu to attempt to reformat the card. I know the card is formatted in FAT32. Is there anything else I can do to fix this problem, or is there something wrong with my camera rather than my SD cards?

Thank-you in advance.

A:Problems with SD card being read in my panasonic DMC-ZS7 LUMIX digital camera

Do you access to a card reader? Would help to tell if the problem is with the card.

Did you by chance change the camera setting that allows downloading?

Do you get the same message with both cards?
Relevancy 38.7%

I am thinking of purchasing the TZ6 over the TZ7 as its 40 cheaper but as far as I know the only difference between the two is HD video recording and 0.3 inch bigger screen

- is that the only differences?


Relevancy 38.7%

my lens got stuck and it won't go out of its socket thing. Its been dropped before but not in the last week for it to be stuck
Relevancy 38.27%

The camera in movie mode was working fine untill now. When I went to use it now, I select movie mode, press the shutter button to focus, then full depression. A few seconds go by and a box appears on the right side of the screen with a flashing arrow pointing right. It does not film anything. Can't figure the problem. Any advice? TIA
Relevancy 38.7%

I am using Vista O/S. Previously I used Windows XP when I purchased the camera and it worked fine then we bought a new computer.

When taking movies - voice/motion it shows up great on the camera but when I view it on my computer - I can get the sound but no movement. I am thinking maybe I should be updating drivers (just my idea). Like I said everything works fine when reviewing them in my camera but once I put them on the computer it lacks movement.

Please help as this is driving me crazy. I do know when I got my new laptop (Vista) I had to download new drivers so my older printer would work with Vista. I'm thinking the same must be true with the camera.

Thank you.

Relevancy 39.13%

If you own a camera or camcorder that uses SD cards, chances are you've confounded yourself at some point trying to figure out how fast a card you need (or want) for your device. This is complicated by a lot of factors, primarily that the Class specification defines a minimum sustained transfer rate--Class 6 is 6 megabytes per second, Class 10 is 10MBps, and....
Relevancy 38.7%

I can't get there! I'm on XP Home. Any help? Thanks.

Relevancy 39.13%


I have a Panasonic lumix DMC-FZ18 and I can not increase shutter speed. It stops up to 8 in the mode is "S" and "A" (shutter & Aperture) and up to 60 in the mode "M" (Manual) Previously it was not like that. Now I'm unable to increase my shutter speed. Another problem is time delay in taking pictures it's showing seconds before the shutter fires. Previously it was not like that. Kindly help me.

Thanks in advance,

A:Panasonic Lumix DMC-FZ18

I&#8217;m not sure what you might have been doing before, but the specs for the camera show that in shutter and aperture priority it is limited to 8 seconds and in full manual it is 60 seconds: It appears to be working properly.

Long zoom shots with difficult contrast will cause most non-DSLR cameras to hunt for focus. On a bright day shooting a normal scene at wide angle, if it is taking several seconds to focus there is something wrong and you might contact Panasonic for repairs. But if it is just happening sometimes and especially at zoom it is probably normal.
Relevancy 39.56%

My camcorder appears to record etc., as you can see the stuff you are recording on the screen but when you go to play it back it will not read the dvd. A friend says the pick up lens is not moving freely. The eye? I have no idea what he means. All I know as that it does not recognize the dvd even to finalize it. Anybody have any suggestions? Please?
Relevancy 38.7%

I bought a used panasonic DMC-LX5 in a yard sale. I don't have software disk
power and download cables for it. Is there a place I could download the software
for it? I figure I can get a download cable for it on ebay if I think it works. I don't
know what I need for software for it.

Thank you,

A:Panasonic DMC-LZ5 software/driver download.

If you're using XP you may not need any software...

plug it in and turn it on ...see if shows as a removeable drive in Explorer

a card reader is another option...
Relevancy 38.7%

I have been using this camera for a few months now and I am not all that happy with the image quality. There are a lot of exposure options and mayb that's the problem. I have used a Leic 35 for many years and so far, the 35mm slide it produces are far superior.
The Panasonic has a lens with a Leica name on it it but I am not sure how much Leica there is in it.

The images are consistantly soft even with the jitter option on max.

Relevancy 39.13%

When I try to import video files from my Panasonic SDR-H200 video camera to my PC using ImageMixer 3, I get an error message which reads, "IMxBrowser.exe has encountered a problem and needs to close blah, blah, blah" The error signature shows, App Name: imbrowser.exe, App Ver:, Mod Name: imbrowser.exe, Mod Ver:, Offset: 0002f885.
If I try and use other software it indicates that my video camera is not detected, any ideas?

A:ImageMixer 3 for Panasonic problem

It would appear that my recently installed Kaspersky I.S.7 was causing the importing problems. I temporarily suspended Kaspersky and everything worked beautifully.
Relevancy 39.56%

Hi, I have the above mention camera. I want to take pictures of my kids at night at a fountain with lights under the shooting water. ( i will attach a picture) BUT I don't know the correct setting. We went the other night and my pictures are terrible. Any help would be great!

A:Panasonic DMC-FZ30

The fountain was moving, the kids were moving and the camera was moving-all in a night shot that requires the lense to remain open for considerable time, and also the backlighting places everyone in shadow. Worst of all conditions. I can think of no way to get that shot unless the fountain is taken seperatly and the kids are superimposed from a seperate shot taken in daytime.
Relevancy 39.56%

Does anyone know if this camcorder is good for everyday basic video taking? If not can you please tell me your opinion if it is under $300.00.

Thank you for your time!
Relevancy 39.56%

I have a Panasonic Palm Cam model PV-SD4090. The last time I turned it on, it sounded like it couldnt read the disk. It just sounds like it was "cycling" trying to read the disk, even when it was turned OFF. I finally got the diskette out. It is a disk mentioned in the SUBECT line. Obviously the camera needs repair, but that does not make monetary sense, since newer cameras are much smaller and cheaper. I got a new one for Christmas (Kodak Easy Share C433). Any help would be appreciated.

A:Panasonic Superdisk 120 MB

speedbump1100 said:

I have a Panasonic Palm Cam model PV-SD4090. The last time I turned it on, it sounded like it couldnt read the disk. It just sounds like it was "cycling" trying to read the disk, even when it was turned OFF. I finally got the diskette out. It is a disk mentioned in the SUBECT line. Obviously the camera needs repair, but that does not make monetary sense, since newer cameras are much smaller and cheaper. I got a new one for Christmas (Kodak Easy Share C433). Any help would be appreciated.Click to expand...
Relevancy 39.13%

Wondered if anyone might be able to help with a problem I'm having with my Panasonic PV-DV203 palmcorder. Whenever I try to record or even play back a tape, I get a message -- "Tape Not Inserted" -- when there IS a tape inserted. The palmcorder will not play or record. I've tried different new tapes and switched batteries, but still get the same result. My tapes are Panasonic and I've only recorded four or five tapes since I bought the camcorder. I haven't used the camcorder very much, and it's never been dropped, abused or overused. Any ideas from anyone? Thanks.
Relevancy 38.7%

Guys, I have Panasonic NV GS-11 camcorder. I want to play a MiniDV received from US (NTSC) and i am from India (PAL) . I just want to transfer the MiniDV data into the computer so i can edit the content of my friends birthday. Please tell me how to do it. I have lost the mannual of camcorder so can't check it how to make changes in the format in Camcorder if possible.

Please tell me which button to press in particular camcorder. When i play the MiniDVs, right now only able to see the counter moving in the LCD screen.

Please help.
***If possible in Panasonic MD-9000 then tell. So i can also arrange that. But above one is preferable.

Relevancy 49.45%

does anyone know anything about the panasonic dmc-f1 (also called dmc-fx1)? does anyone own one (or know anyone who does)?

Relevancy 39.56%

I just bought a Panasonic PV-L453 VHS C camcorder with a built in still camera. I got a new Panasonic 64MB SD card for it, and whenever i put it on photo mode with the card in it, it says it is write protected whether the switch on the card is in the lock position or not. It did the same thing with another 128MB card made by simpletech. I'd appreciate any ideas on how to fix this. Thanks.

A:Panasonic VHS C still camera

are you sure that the camcorder will accept cards that large? are you able to go into card setup and format the card?
Relevancy 38.7%

I have a Panasonic HDC-TM10 video camera.
I want to download a video onto an external hard-drive, but the computer keeps telling me that there is nothing to download. The video is there because I'm able to watch it.

I DID start downloading video onto another external hard-drive which hit capacity before the video was complete.
I hooked up another hard-drive and, now, the computer says there's nothing on the video camera.

Do I need to over-ride something? What am I missing?
Thank you, in advance, for your time and expertise.

Relevancy 38.7%

Hi dears,
I'm frustrated, I wanted to replace the Media player and the home theater with a single device, but I have problems ...
I purchased the 'Blue ray player and home theater Panasonic SC-BTT262 with ethernet connection and DLNA compatibility to play my videos on a hard drive connected to the router DLNA, but I can see the file but it says "can not play the file" ... on all videos in different formats.
The DLink Boxee media player I had before reproducing them without any problems.
Can you help me?
Do you know other Home theatre with more compaibility?
Thank you.

Relevancy 38.27%

Hello anybody out there with any ideas on my problem I have a Panasonic Viera TCP ST with a hardwired ethernet connection to my ASUS RTN U router I recently connected a USB hard drive to one of the USB ports on the router which I intended to start placing music and video files on Kind of like having a NAS drive The TV will play all my Viera Panasonic reading files video AVI files MP files and some of the Mpeg files that I had on my PC which is also hardwired to the router It will not play MKV files not all Mpeg files and even some AVI files it wouldn t play It will see the files but just will not play them The PC will play all of them I started copying the files to the router USB drive and found it will not read the AVI files These are files it will read if they are on the PC but not the router USB drive In playing around I found it will read MKV files from the USB drive which it will not when they are on the PC It will read MP files whether they are on the PC or the routers USB drive It will see the files but just comes up with a message quot Panasonic Viera reading video files Cannot Read File quot In the folder I created on the USB drive I called it media I am copying the files to I Panasonic Viera reading video files see where the system has created a directory quot minidlna quot I am wondering if I need to add Panasonic Viera reading video files codecs somewhere or I am at a loss I can move the file back to the PC and it will read Now it also reads MKV s which it won t from the PC nbsp
Relevancy 36.98%

Hi, I hope someone can help me as i can't find anything on the internet or in the manual anywhere that might be able to.

I have a Panasonic Home Theatre SA-BTT755 that won't recognise any of my usb hard drives. I've tried a 1TB seagate, a 750GB Western Digital and a 4TB Seagate and the system just won't register there is any usb device plugged in. I've looked through the settings and can't find anything.

Can anyone shed some light on this problem.. Is there something i am missing?


A:Solved: Panasonic Home Theatre SA-BTT755 won't recognise usb hard drive
Relevancy 38.27%

My Problem: I aquired a Panasonic PV-GS32 MiniDV video camera - my gs35 was stolen and I still have tapes. I thought I could use the MotionDV Studio software I had with my gs35 but Panasonic says they are not compatable - I haven't tried YET.

My question: Any suggestions for software or workaround to get my MiniDV movies from my camera to my pc for editing - I have too many to farm it out, the gs32 was inexpensive and works fine.

My System:
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 3326 Mb
Graphics Card: NVIDIA GeForce 8300 GS, 512 Mb
Hard Drives: C: Total - 152531 MB, Free - 28702 MB; I: Total - 953867 MB, Free - 546289 MB;
Motherboard: Dell Inc., 0GN723
Antivirus: Norton 360, Updated: Yes, On-Demand Scanner: Enabled

A:Video edit software for Panasonic PV-GS32

If you play them back on the camera, and plug the camera into your PC, any commercial video-editing software should work (excluding the camera model-specific software from Panasonic of course).

Pinnacle software is quite popular:
Relevancy 38.7%

We recently have been trying to run our Dell Inspiron E1505 laptop with Windows Vista into our Panasonic Viera TC-P42X1 flatscreen tv...after talking to the Panasonic tech support, they recommended using a VGA to HDMI cable and running it from the VGA output on our laptop into the HDMI input on the television...this has not worked, though I have been playing with the NVIDIA program on the laptop and I feel like I might be getting close to figuring this there any way to make our laptop screen appear on the television with a VGA to HDMI cable? I would really like to avoid running out and buying yet another cable, if there is any way to make this one work...

Relevancy 36.98%

I just purchased this TV and used a very cheap 6 foot HDMI cable to connect it to my satellite receiver.

The picture looks fantastic when objects are shown up close. But small or far away objects appear pixelated. It's just not the resolution I've come to expect from an HDTV.

I've set the satellite output to 720p but curiously and perhaps unrelated, the picture only works with 4:3 aspect ratio and the 16:9 appears stretched. I've tried all the different formats and the 4:3 is the one that produces the best picture.

Is there an issue with the HDMI cable, or is the problem somewhere else?

A:Could cheap HDMI cable cause pixelation on Panasonic TC-L37C22 720p LCD HDTV?

It may not be the cable. Unless you got it at a dollar store for $1.00, an inexpensive 6 foot HDMI cable should be able to handle 720P OK.

Are you watching an actual HD channel when checking the picture quality? If not, the receiver is upconverting the 480 lines of standard definition TV to 720 lines and that can cause some pixelization.

The pixelization may also be due to over compression of the video by the satellite operator. The cable and satellite companies are all falling over each other claiming they have more HD channels than the competition and are adding channels to back up their claims. Given a limited and finite amount of satellite bandwidth, they need to increase the compression to fit more channels. Some channels may get compressed more than others. The additional compression may have some intelligence and apply higher compression to parts of the scene that it deems to be of less importance.
Relevancy 38.7%

I have a Panasonic DMR-E75V DVD recorder. I have recently attempted to use it to burn a vhs to a DVD-R, but am now unable to read this DVD on my computer. It picks it up as an unformatted blank DVD-R, although I look on the underside of the disk and it is obvious that there has been information written to it. Does anyone have any ideas?

A:Panasonic DMR-E75V cannot read DVD-Rs on comp

Did you finalize the disc as the last step of the burning process on the recorder? It will only play on the recorder until it is finalized.
Relevancy 39.13%

I have a Sony HDR-CX7 camcorder which records in .mts on to a memory stick and when I download the files onto my hard drive using the bundled software, it saves as .m2ts. I bought the Panasonic BD35 since it plays AVCHD and had an SD slot. I thought I should be able to directly transfer my .mts or .m2ts files on to an SD card and be able to play them but I keep getting an incompatible file error. I tried burning the files on a dvd but that did not work either. I've been trying to figure out what I need to do to convert my files into a playable AVCHD format. If anyone has any experience with this and wouldn't mind giving me a step by step (please be specific) of what to do, I would really appreciate it. Thanks!