Windows Support Forum

WIN XP Network Connection Properties Crash

Q: WIN XP Network Connection Properties Crash

Hi, I'm stumped as to why Explorer crashes whenever I try to view properties on any of my network connections. Its quite possible that I've messed something up in one of many tweaks. I just don't know when it happened.

The event viewer shows the following error:

"Faulting application explorer.exe, version 6.0.2900.2649, faulting module msvcrt.dll, version 7.0.2600.2180, fault address 0x00037e9f."

Is it possible to re-install just the networking components for WinXP, or do I have to do a full fresh install?

Inso

Relevancy 100%
Preferred Solution: WIN XP Network Connection Properties Crash

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 66.65%

Hi everyone,

Everything was going just fine, and I was enjoying Wireless network, today I have to connect to a network via LAN ( with an RJ-45 ), and after that I am unable to open properties for any of my network connections. When I right click on any of the network connections then a menu appears with nothing in it, as you can see from the picture, and when I click on the last menu entry assuming it would be Properties, a dialog box appears with nothing written on it and an OK button, I want to change the network properties for my wireless network. Please help.

Thank You very much.

A:Network Connection Properties not Opening

Originally Posted by rat170


Hi everyone,

Everything was going just fine, and I was enjoying Wireless network, today I have to connect to a network via LAN ( with an RJ-45 ), and after that I am unable to open properties for any of my network connections. When I right click on any of the network connections then a menu appears with nothing in it, as you can see from the picture, and when I click on the last menu entry assuming it would be Properties, a dialog box appears with nothing written on it and an OK button, I want to change the network properties for my wireless network. Please help.

Thank You very much.





Do you have a backup you can restore from? thats a quick easy fix for it.

Ken

http://www.vistax64.com/network-sharing/246852-network-connection-properties-not-opening.html
Relevancy 66.65%

I am working on someone's XP Pro SP2 Box, and I cannot change the properties of any network connection. When I right click on the connection and click properties is says "Do not have sufficient privileges, contact your administrator"

I am the Administrator, logged in as the administrator account, and the machine is not on a domain.

Any Ideas what setting could cause this, and where it is?
I wasnt even aware you could lock administrator out...

Thanks -
Mike
 

Relevancy 65.79%

I have symptoms that I am having trouble getting rid All of them started Network Properties Connection Nowfind, WebSiteViewer, nights WebSiteViewer, Nowfind, Network Connection Properties ago and I have been trying to get rid of them since then First of all I have something called WebSiteViewer that keeps coming back even after it appears that it has been removed I have read WebSiteViewer, Nowfind, Network Connection Properties other logs on this forum about it and I have tried some of the advice but with no avail Second when I open a web browser it is going WebSiteViewer, Nowfind, Network Connection Properties to www nowfind net Third if I click on my Wireless Network Connection properties the window disappers without opening the properties So for so more detailed information on what I know about what is going on The WebSiteViewer has installed in C Program Files WebSiteViewer There are five files in that directory ban dd dlr exe and ico There is also a shortcut on my desktop and a shortcut on my Start Menu for the exe There is also a misb exe file in my root directory C that I believe is related as it has the same icon There is a process with an image name of dlr running I started out by manually deleting all of this stuff and manually shutting down the process I have also tried Spybot and Adware Both of these programs also found the WebSiteViewer stuff listed above as well as a few registry keys dealing with them They both seemed to remove everything however after a reboot everything comes back So somewhere there is something still living that reinstalls everything once I reboot The www nowfind net problem I initially tried just setting my default URL back to blank as I had it Which it accepts but then the next time I open a browser it is back If I type a URL without the preceding http then it automatically goes to www nowfind net however if I fully qualify the URL with http then it goes where I expect In the registry for HCU and HLM under Microsoft- gt Internet Explorer there are a number of entries that have the www nowfind net URL including Search and SearchURL Then under Main still under Internet Explorer there are Default Page URL Default Search URL Search Bar Search Page and Start Page And then under Search in CustomizeSearch and SearchAssistant I have tried deleting all of these registry entries manually However they come right back even without a reboot I can delete them then just refresh and they are right back So here again something is running that puts them back If I view my available Wireless Network Connections then hit the advanced tab then select my network and hit configure or properties then the window just disappears instead of opening the properties The last thing that I should mention is that I have also run CWShredder and TrendMicros virus scan the web version that is available from a link that I found somewhere in thisforum I am running XP and I also am running an outdated version of McAfee that came free on my computer Now I have never run HijackThis before I simply downloaded it and ran it I ran it while all of symptoms above were present as I stated AdWare and Spybot will remove the WebSiteViewer comes back after a reboot and the www nowfind net comes back right away I also read somewhere on the forum to use the KRC HijackThisAnalyzer so here is the result txt from it Log was analyzed using KRC HijackThis Analyzer - Updated on Get updates at http www greyknight com download htm programs Security Programs Detected c PROGRA mcafee com vso mcvsrte exe c PROGRA mcafee com vso mcshield exe C PROGRA mcafee com agent mcagent exe C PROGRA mcafee com vso mcvsshld exe O - HKLM Run MCAgentExe c PROGRA mcafee com agent mcagent exe O - HKLM Run MCUpdateExe C PROGRA mcafee com agent mcupdate exe O - HKLM Run VirusScan Online quot c PROGRA mcafee com vso mcvsshld exe quot O - HKLM Run VSOCheckTask quot c PROGRA mcafee com vso mcmnhdlr exe quot checktask O - Service McAfee com McShield McShield - Unknown owner - c... Read more

A:WebSiteViewer, Nowfind, Network Connection Properties

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem a.s.a.p

Please be patient with me during this time.
__________________

...A Reflection On Spyware...


Mr. Incredible: No matter how many times you save the world, it always manages to get back in jeopardy again. Sometimes I just want it to stay saved! You know, for a little bit? I feel like the maid; "I just cleaned up this mess! Can we keep it clean for... for ten minutes!"

...greyknight17 DOT com...

http://www.techsupportforum.com/forums/f100/websiteviewer-nowfind-network-connection-properties-42318.html
Relevancy 65.79%

Please help me
my Wireless Network Connection Properties not can click!
me try Uninstall WNC Adapter on Device Manager
and reset IPV4, Winsock on CMD.
but still not can click. what is this problem?

http://www.sevenforums.com/network-sharing/382833-help-wireless-network-connection-properties-not-can-click.html
Relevancy 65.79%

This is a fairly new install of Windows 8 pro (within the last month), and while trying to set up a static ip up today I found that I was unable to access the network properties or disable the connection in the Network Connections. I am pretty stumped as I am the only user of this computer and from what I can tell have the correct permissions to do so. When trying to check the properties it tells me "an unexpected error has occurred" with no further information.

Has anyone had this problem and found a fix?

A:Unable to access properties of my network connection.

It sounds like you aren't using an Admin account on this machine.

Under Computer Management, Local Users and Groups>Users, you should see your name there, under the Member Of' Tab, you should be listed at a member of the Administrators and Home Users. You can add the credentials if you aren't.

http://www.eightforums.com/network-sharing/21814-unable-access-properties-my-network-connection.html
Relevancy 65.79%

I have up until a few days ago been able to modify and save my network properties ok I connected a new DisplayLink USB docking station that lead to an update of some sort I believed this to be 8 Not Properties Saving Network Connection Windows to do with associated drivers I Windows 8 Network Connection Properties Not Saving let this go ahead and it may well have nothing to do with the problems I have been having First of all I couldn't even see the IP parameters and kept getting an error as follows quot In Order to Configure TCP IP You Must Install and Enable a Network Adapter Card quot The wired and wireless was working in environments where I could use DHCP so I was confident the hardware was ok Uninstalling the drivers and then updating them has got me passed this problem so I can see and edit the IP parameters However now they are never saved I edit them close the window re-edit them and they are back to automatic settings I need to use static settings in the office So far as I can see there are possibilities I don't have permissions to save these settings wherever they are stored But I have administrator permissions Where are the settings stored I have saved them before How can I get access to be able to save them again Something else is overwriting the settings How do I find out what and stop it Any other suggestions would be greatly appreciated Or a way to diagnose solve my problem Thanks in advance Steve

A:Windows 8 Network Connection Properties Not Saving

Have you tried running a system file corruption scan/repair using the sfc /scannow command?

SFC /SCANNOW Command - Run in Windows 8

http://www.eightforums.com/network-sharing/32329-windows-8-network-connection-properties-not-saving.html
Relevancy 65.36%

Hi Team,

I have a problem with my Local Area Connection. I have installed the driver correctly and can access the internet also. But when I go to Open Network and sharing center -> change adapter setting -> I can not see Local Area Connection icon appear. My OS is windows 7, HP System.

A:Local area connection is not showing in network properties

Welcome to Seven forums mail.

Can you please post a picture of Device manager and a picture in the adapter settings where your local area connection should be?

http://www.sevenforums.com/network-sharing/331350-local-area-connection-not-showing-network-properties.html
Relevancy 64.5%

I wonder how I can disable my wireless network and view their WAN or Lan properties in windows 7. I can do it in windows xp myself though.

A:How I can disable/enable wireless network and view properties of Lan connection?

Hi have you looked in device manager

http://www.techsupportforum.com/forums/f217/how-i-can-disable-enable-wireless-network-and-view-properties-of-lan-connection-557333.html
Relevancy 64.07%

I am trying to reserve an IP for my computer but when I went to the Connection with issue protocols, missing and services Network Properties clients, properties of my wireless network connection the connection properties window is Network Connection Properties issue with protocols, clients, and services missing missing everything except for Client for Microsoft Networks Even the connect using field has nothing Network Connection Properties issue with protocols, clients, and services missing in it The wireless connection is working but I can t get to the TCP IP protocol to reserve the IP instead of using DHCP Here is an image of the issue An screen cap of my wireless network connection properties can be seen here http i photobucket com albums hh gremmie untitled jpg Has anyone ever seen this Any ideas to fix it Thanks for any info EDIT I forgot to mention that when I click the install button and click either client service or protocol I get an error message that says quot Could not add the requested component The error is The system cannot find the file specified quot so I can t reinstall the TCP IP Protocol to reserve the IP nbsp

A:Network Connection Properties issue with protocols, clients, and services missing

Click on install then choose protocol then add and see....
 

https://forums.techguy.org/threads/network-connection-properties-issue-with-protocols-clients-and-services-missing.692118/
Relevancy 58.91%

I'm trying to connect my Xbox 360 to my laptop, using Vista, and there is no "sharing"d tab to allow ICS, so It always fails the IP address test. I've tried every site and googled it multiple times but still haven't gotten a solution.
 

A:Solved: No "Sharing" tab in wireless network connection properties

https://forums.techguy.org/threads/solved-no-sharing-tab-in-wireless-network-connection-properties.754170/
Relevancy 56.76%

Hello Im using vista ultimate x When i access the local area connection window where all the TCP IPv and TCP IPv are I am unable to click on properties on any of them yes i am the administartor By other words i am unable too access the window where you can change the quot Obtain an ip adress automatically quot and access window area "local properties" in properties Cannot connection quot obtain dns server address automatically quot options are When i sellect TCP IPv or Cannot access properties in "local area connection properties" window TCP IPv the properties button is just gray As is the unnistall button When i hit the configure button i just get sendt back too the desktop I am also unable to uncheck the TCP IPv or TCP IPv boxes on the left side of the names or any of the other stuff If I hit the install button and try too install i new protocoll i only get a error message saying quot windows cannot find the file quot Iv e also tried it jusing the administrator account But it didn t help What is causing this problem and how I fix it Thanks in advance nbsp

https://forums.techguy.org/threads/cannot-access-properties-in-local-area-connection-properties-window.636065/
Relevancy 56.76%

Hello Im using vista ultimate x When i access the local area connection window where all the TCP IPv and TCP IPv are I am unable to click on properties on any of them yes i am the administartor By other words i am unable too access the access window Cannot in properties" area connection properties "local window where you can change the quot Obtain an ip adress automatically quot and quot obtain dns server address automatically quot options are When i sellect TCP IPv or TCP IPv the properties button is just gray As is the unnistall button When i hit the configure button i just get sendt back too the desktop I am Cannot access properties in "local area connection properties" window also unable to uncheck the TCP IPv or TCP IPv boxes on the left side of the names or any of the other stuff If I hit the install button and try too install i new protocoll i only get a error message saying quot windows cannot find the file quot Iv'e also tried it using the administrator account But it didn't help What is causing this problem and how Cannot access properties in "local area connection properties" window I fix it Thanks in advance

http://www.techsupportforum.com/forums/f217/cannot-access-properties-in-local-area-connection-properties-window-187331.html
Relevancy 54.18%

Hey guys,

Been having an issue where upon right clicking (a file, folder, drive, you name it) and clicking properties Windows Explorer will crash.

Heard people were having a similar problem when only right clicking, many solved this by going into their registry and deleting some values. Since their problem was similar to mine, I went ahead and deleted some values under

HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers

however, this doesn't seem that is the problem. Any ideas?

UPDATE: After running sfc/scannow I receive a BSOD, upon reboot the following message is displayed. Also I've attached the dump file

Thanks for even reading this, any help is extremely appreciated,

Camaren

A:Right Click Properties Crash

Hello,

Have you tried a system files check?






  
Quote: Originally Posted by JK


Open an elevated command prompt and enter sfc /scannow.


You might also try a repair install.

http://www.sevenforums.com/bsod-help-support/122991-right-click-properties-crash.html
Relevancy 53.32%

Can some help with this bizzare behavior on windows XP sp1 The following sequence usually causes my pc to crash Right click on a file ---select properties--summary Add something to Category field or Comments field Click apply Pc crashes and reboots
Event viewer says computer has rebooted from a bugcheck etc etc If I close all unneeded programs such as Norton etc same thing happens

Any ideas
 

A:Changing File Properties causes XP Crash

Try this:
Turn Off the "Fade or Slide Menus into View" Visual Effect
1. Click Start, and then click Control Panel.
2. Click Performance and Maintenance, and then click System (or double-click the System icon).
3. On the Advanced tab, click Settings under Performance.
4. On the Visual Effects tab, click to clear the Fade or slide menus into view check box.
5. Click OK.

or this:
Use Classic Windows Folders
1. Click Start, and then click Control Panel.
2. Click Appearance and Themes, and then click Folder Options (or double-click the Folder Options icon).
3. On the General tab, click Use Windows classic folders.
4. Click OK.

Also, after you rt-click, check in Task Manager to see if anything is using a lot of CPU.

moper
 

https://forums.techguy.org/threads/changing-file-properties-causes-xp-crash.318874/
Relevancy 52.89%

Hi all,
I've some users added to 'Network configuration operator' on Windows 7x64 Pro SP1 and they cannot open the properties dialog of network interface. I've tested the KB2157332 on Windows 7 x64 Pro
without SP1 and it works, but I cannot install it on W7SP1 computer, . I'm looking a SP1 version of the hotfix but I cannot find it. 
I've read
this and
this post but still getting the issue
Any idea to solve it?
Thanks

https://social.technet.microsoft.com/Forums/en-US/bd6896d1-1e9d-49ac-955a-2492179ed728/network-configuration-operator-cannot-open-the-properties-dialog-of-a-network-interface?forum=w7itpronetworking
Relevancy 52.46%

Hey everyone So I've been experiencing a lot of unwarranted crashing recently Let & on access open programs All properties can't crash computer me list out all the strange behavior before pasting the FRST log When I start up my machine once I reach the All programs crash on open & can't access computer properties desktop screen very quickly what looks like a command prompt pops All programs crash on open & can't access computer properties up is there for maybe a half a second then closes immediately When opening some programs now they crash immediately upon opening Programs that I've found to be crashing are Steam gaming client - opens till the point of downloading client updates then crashes Skype - I briefly get the windows thinking blue ring and then nothing happens Immediate crash Windows Media Player and VLC player - Both crash immediately after opening Quicktime and iTunes - I briefly get the windows thinking blue ring and then nothing happens Immediate crash Other programs work fine no problem like all my browsers I use chrome and firefox as well as some other programs like spotify and my drawing programs alias sketchbook pro Not sure if this is connected but I've found that I can't download anything from Dropbox onto this computer And when I say can't download I mean there isn't even an option to do so when I log into their web-based client I have noticed that the option to download is there VERY briefly when I first log in but disappears within seconds of being on the site I can download things just fine onto my Cintiq Companion iPad and work computer I'm not sure if not being able to download to my desktop is connected to any of this I've found is that if I right-click on my Computer icon and click on properties in the drop-down menu it crashes my windows explorer immediately A quick flash my desktop disappears then is all reappears a second later Still can't access the properties screen And those are all the things I've noticed so far I've been running Avira on my computer to make sure any surface level virus spyware and malware is cleaned It found a total of virus upon scanning and I've attached those report logs if your interested in seeing what it found With all that explained here's the FRST log If I can get you guys anything else please just let me know I'm eager to work with you to help get this resolved asap Scan result of Farbar Recovery Scan Tool FRST txt x Version - - Ran by BigToews administrator on PLUGTOTHEWORLD on - - Running from C Users BigToews Desktop Loaded Profiles BigToews Available profiles BigToews Platform Windows Professional Service Pack X OS Language English United States Internet Explorer Version Default browser FF Boot Mode Normal Tutorial for Farbar Recovery Scan Tool http www geekstogo com forum topic -frst-tutorial-how-to-use-farbar-recovery-scan-tool Processes Whitelisted If an entry is included in the fixlist the process will be closed The file will not be moved Microsoft Corporation C Program Files Microsoft Security Client MsMpEng exe AMD C Windows System atiesrxx exe Alereon C Program Files x SAMSUNG Wireless Central Station AlUwbService exe AMD C Windows System atieclxx exe SMSC C Program Files SGFX sgfxmgr exe Wacom Technology Corp C Program Files Tablet Wacom WTabletServicePro exe Avira Operations GmbH amp Co KG C Program Files x Avira Antivirus sched exe Hewlett-Packard C Program Files x Hewlett-Packard HP Odometer hpsysdrv exe Microsoft Corporation C Program Files Zune ZuneLauncher exe Microsoft Corporation C Program Files Microsoft Security Client msseces exe Apple Inc C Program Files iTunes iTunesHelper exe Avira Operations GmbH amp Co KG C Program Files x Avira Antivirus avguard exe Apple Inc C Program Files Common Files Apple Mobile Device Support AppleMobileDeviceService exe Spotify Ltd C Users BigToews AppData Roaming Spotify SpotifyWebHelper exe Apple Inc C Program Files Bonjour mDNSResponder exe Google Inc C Program Files x Google Chrome Remot... Read more

A:All programs crash on open & can't access computer properties

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===ATTENTION: System Restore is disabled.Important - Turn System Restore on or off - Windows Helphttp://windows.microsoft.com/en-ca/windows/turn-system-restore-on-off#1TC=windows-7===Remove the processes using the Add/Remove programs applet.DMUninstaller (HKLM-x32\...\DMUninstaller) (Version: - ) <==== ATTENTIONDownload Updater (AOL LLC) (HKLM-x32\...\SoftwareUpdUtility) (Version: - ) <==== ATTENTIONFunmoods on IE and Chrome (HKLM-x32\...\funmoods) (Version: - ) <==== ATTENTION===Open notepad (Start =>All Programs => Accessories => Notepad). Please copy the entire contents of the code box below.

start

CreateRestorePoint:
CloseProcesses:

HKU\S-1-5-21-4120417985-3311138565-2582081851-1000\...\Run: [AdobeBridge] => [X]
HKU\S-1-5-21-4120417985-3311138565-2582081851-1000\...\Run: [NextLive] => C:\Windows\SysWOW64\rundll32.exe ",EntryPoint -m l
CHR HKLM\SOFTWARE\Policies\Google: Policy restriction <======= ATTENTION
HKLM\SOFTWARE\Policies\Microsoft\Internet Explorer: Policy restriction <======= ATTENTION
HKU\S-1-5-21-4120417985-3311138565-2582081851-1000\Software\Microsoft\Internet Explorer\Main,Start Page = http://start.funmoods.com/?f=1&a=ddrnw
SearchScopes: HKU\S-1-5-21-4120417985-3311138565-2582081851-1000 -> DefaultScope {90B7F9EA-3B24-4673-8765-835D26CF83FF} URL = http://start.funmoods.com/results.php?f=4&a=ddrnw&q={searchTerms}
SearchScopes: HKU\S-1-5-21-4120417985-3311138565-2582081851-1000 -> {014DB5FA-EAFB-4592-A95B-F44D3EE87FA9} URL = http://search.conduit.com/Results.aspx?ctid=CT3324319&octid=EB_ORIGINAL_CTID&SearchSource=58&CUI=&UM=2&UP=SPB1CC768A-EF57-48B5-AA1D-5DB9B0F6BEC2&q={searchTerms}&SSPV=
SearchScopes: HKU\S-1-5-21-4120417985-3311138565-2582081851-1000 -> {90B7F9EA-3B24-4673-8765-835D26CF83FF} URL = http://start.funmoods.com/results.php?f=4&a=ddrnw&q={searchTerms}
BHO-x32: Funmoods Helper Object -> {75EBB0AA-4214-4CB4-90EC-E3E07ECD04F7} -> C:\Program Files (x86)\Funmoods\funmoods\1.5.11.16\bh\funmoods.dll [2012-01-25] (Funmoods BHO)
Toolbar: HKLM-x32 - Funmoods Toolbar - {A4C272EC-ED9E-4ACE-A6F2-9558C7F29EF3} - C:\Program Files (x86)\Funmoods\funmoods\1.5.11.16\funmoodsTlbr.dll [2012-01-25] (Funmoods)
FF Plugin: @microsoft.com/GENUINE -> disabled No File
FF Plugin-x32: @microsoft.com/GENUINE -> disabled No File
FF SearchPlugin: C:\Users\BigToews\AppData\Roaming\Mozilla\Firefox\Profiles\at5cjh7r.default-1385943104367\searchplugins\conduit-search.xml [2014-01-22]
CHR C:\Users\BigToews\AppData\Local\Google\Chrome\User Data\Default\Extensions\flliilndjeohchalpbbcdekjklbdgfkk [2015-05-01]
CHR HKLM\...\Chrome\Extension: [flliilndjeohchalpbbcdekjklbdgfkk] - https://clients2.google.com/service/update2/crx
CHR HKLM-x32\...\Chrome\Extension: [fdloijijlkoblmigdofommgnheckmaki] - C:\Program Files (x86)\Funmoods\funmoods\1.5.11.16\funmoodsOEM.crx [2012-01-04]
CHR HKLM-x32\...\Chrome\Extension: [flliilndjeohchalpbbcdekjklbdgfkk] - https://clients2.google.com/service/update2/crx
S3 wacommousefilter; system32\DRIVERS\wacommousefilter.sys [X]
S3 wacomvhid; system32\DRIVERS\wacomvhid.sys [X]
C:\Program Files (x86)\Funmoods
C:\Users\BigToews\AppData\Local\Google\Chrome\User Data\Default\Extensions\flliilndjeohchalpbbcdekjklbdgfkk
C:\Users\BigToews\AppData\Local\Temp\avgnt.exe
C:\Users\BigToews\AppData\Local\Temp\dropbox_sqlite_ext.{5f3e3153-5bce-5766-8f84-3e3e7ecf0d81}.tmph_u0kj.dll
AlternateDataStreams: C:\Users\BigToews\Cookies:KgrS260iVmSHAcHlJD389mtm
AlternateDataStreams: C:\Users\BigToews\AppData\Local\Temp:Jpxyvrqjl50qQnPh6mFlw
AlternateDataStreams: C:\Users\BigToews\AppData\Local\Temp:QqDNL10h9yX6oMB5ps3

End
Save the files as fix... Read more

http://www.bleepingcomputer.com/forums/t/575144/all-programs-crash-on-open-cant-access-computer-properties/
Relevancy 51.17%

Hello, I just receive my new desktop with a brand new windows 8, after I successfully installed and activated windows it seems I can't connect to my network neither access its properties. I am actually using my phone as a wifi adaptor through easytether and I already tried to (re)install different driver for my Ethernet card but it makes no difference. I don't think easytether could be the cause but I can't connect to any bank website, facebook, hotmail, I can't download and install google chrome and I can't use windows update (I though it could have fix few of the issues). I don't know if I posted this thread in the right place since so many things are malfunctioning but I'll be glad to have a bit of help here. cheers

A:Can't access network properties,can't connect to network

Originally Posted by sogefurter


Hello, I just receive my new desktop with a brand new windows 8, after I successfully installed and activated windows it seems I can't connect to my network neither access its properties. I am actually using my phone as a wifi adaptor through easytether and I already tried to (re)install different driver for my Ethernet card but it makes no difference. I don't think easytether could be the cause but I can't connect to any bank website, facebook, hotmail, I can't download and install google chrome and I can't use windows update (I though it could have fix few of the issues). I don't know if I posted this thread in the right place since so many things are malfunctioning but I'll be glad to have a bit of help here. cheers



If you can post a screen shot of the ipconfig/all from this machine it would be most helpful.

http://www.eightforums.com/network-sharing/28860-cant-access-network-properties-cant-connect-network.html
Relevancy 49.45%

i am creating a local network of just 2 PCs. 1st one is using windows 7 OS and the 2nd one is using windows 8.1 . Error i am facing is when i click on TCP/IP(v4) properties in 2nd PC(win 8.1 pc) it says that ""In order to configure TCP/IP, you
must install and enable a network adapter card.". 1st pc is working fine and showing shared drives and files in network but 2nd PC is not showing anything in network because id donot allow me to configure IP settings. 
Please Note that i have also connected WiFi connection to my 2nd PC and that connection is working fine and showing all the TCP/IP Properties correctly without showing any error. 
I have disabled Network adapter in Device manager and installed again but nothing happens. 
Help me in this Please
Thank you!!

https://social.technet.microsoft.com/Forums/en-US/2990769a-8c77-41b4-9f7a-3dc0ae0c39e7/error-while-opening-local-network-properties-in-windows-81-ampquotin-order-to-configure-tcpip?forum=w8itpronetworking
Relevancy 49.02%

Hello Everyone, its been awhile since i used revo uninstaller to
remove hotspot shield, but i did not realize it is still on the local
area connection properties, how can I get rid of it from there? Thanks

A:HotSpotShield Still In Local Connection Properties?

Right click the TaskBar and start the Task Manager. Go to the Processes tab. If you see any process for Hotspot shield, end the Process.
Use Hunter Mode in Revo to uninstall it.Uses of ? Hunter Mode? in Revo Uninstaller | Techdows
Now download Junkware Removal Tool. Run it, A DOS window appears. Press any key. It will start scanning automatically.
Now download ADWCleaner. Run it, Install it, Scan, leave everything checked. Clean. Both programs will show a text document when they are done showing you what it has removed.
Then download and run Temp File Cleaner Run it, it will shut down all programs and automatically restart.
If you still have problems,. Try this suggestion:
Uninstall Hotspot Shield Completely?.

http://www.techsupportforum.com/forums/f217/hotspotshield-still-in-local-connection-properties-927250.html
Relevancy 49.02%

Hi - I still have internet access. However, when I go into wireless connections, properties, general, the TCP/IP "stack" has disappeared.

The rest are still there: Client for MS networks
File & Printer sharing
QoS Packet Scheduler

I've posted to other forums and I have had an external PC professional have a look, but not even the latter could find out what happened.

The reason I need it is that I manually set my IP address at home, but let it find it automatically elsewhere, but can't as cannot access the TCP/IP elements.

Thanks.
 

Relevancy 48.59%

I log onto my computer and disruption 1394 internet properties connection and shortly after this I could not access the internet through internet explorer The internet explorer pages would say I was disconnected but I have broadband and am always connected I had a similar problem with this previously internet disruption and 1394 connection properties when I would use yahoo messenger I would be disconnected from the internet and yahoo at the same time but I could shut down my internet connection for a few seconds and then it would let me back on prior to figuring that simpler solution I had to uninstall yahoo messenger and reload it to access yahoo again and had to reboot my computer to gain internet access again At present it would not allow me to use internet explorer shortly after I logged onto my computer so internet disruption and 1394 connection properties just fishing around my computer I found the connection properties page it internet disruption and 1394 connection properties was connected and firewalled along with my local connection why I need two connections I don t know thats just the way I found it anyway when I went under the advanced tap I noticed that the quot Allow other network users to control or disable the shared internet connection quot was checked and I couldn t uncheck it until I st checked it had been unchecked when I found it the above box that reads quot Allow other network users to connect through this computers internet connection quot I m not on a network this is just my home computer now since I have disabled the connection and the box that I started earlier that was checked I haven t had any trouble with getting on the net anymore Oh also when my computer boots up after I enter my password it takes me to an all black screen with a cursor that flashes for awhile them windows will start up and it says my antivirus is disabled for awhile at start up then it shows it on after awhile I should say that I have had a hacker in the past I suspected I did and after trying to get him out for along time and doing I think its called low level formates or something with the helps of some techs to erase my hard drive and start over clean after I tried to do this my home page on internet explorer would have the same address as it always would and others could use the address and get the correct page if I copied and pasted it to them but all mine homepage would be was a blank white screen that said quot Are you trying to test me quot I have not gotten any messages since although there was another time not too long ago it my homepage turned all white again with no message and for awhile I would be booted whenever I talked to a guy on yahoo and I don t have to be in chat for that to happen although that hasn t happened for awhile now I am booted off yahoo several times a day just when its on and not in chat I guess I m asking should I be concerned that someone is messing around with my computer again he never hurt it when he was in there before but the fact that it seems personal at times concerns me somewhat if it was some random act of hacking or something like that I think I would be less concerned oh I guess I should also say that I have two poetry pages one is public and the other one is not and a friend at work was accessing one of them and the computer system at work went crazy saying there was a hlmt exploit virus on both sites and I guess this is put there by someone who has access to the sites and allows a back door to their computers if they access the page that was about a year ago and when I looked up the alert is says it was used rarely but could be very harmful cuz it allowed access and then I sent off the info to microsoft so they would know Am I just being paranoid or do I have reason to be nbsp

https://forums.techguy.org/threads/internet-disruption-and-1394-connection-properties.558245/
Relevancy 48.59%

We use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.

We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.

This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.

A:VPN Connection - Cannot open Networking Properties IPv4

I'm having the same issue, have you found a solution yet?

Edit: Found a post that explains how to set the 'use default gateway' setting. SOLUTION | Windows 10 VPN Network Settings Bug

Still can't open the properties, but by using this Powershell command you can set the default gateway setting:


Code:
Set-VpnConnection -Name "VPN-NETWORK-NAME-HERE" -SplitTunneling $True

http://www.tenforums.com/network-sharing/11534-vpn-connection-cannot-open-networking-properties-ipv4.html
Relevancy 48.59%

Hi

How do I disable local area Connection properties for a standard use and for an administrator on a pc, users on my network keep changing the network adapter settings to allow them to have access to the internet. The users are a little tech savvy so by setting the adapter settings and just leaving out the default gateway and dns server address has not helped. I need to go deeper into windows network configuration to find a way to block them or find another way to prevent internet access. None of the users have email so they do not need access to mail either.

Thank you

A:How do I disable local area Connection properties

Tried Group Policy yet?

http://www.sevenforums.com/network-sharing/371260-how-do-i-disable-local-area-connection-properties.html
Relevancy 48.59%

hello every one,,,,
I installed windows 10 and this is abest windows,,,
but I when make vpn connection and I want chang ip and dns ,"TCP/IP PROPERTIES ON VPN CONNECTION NOT WORKING ON WINDOWS 10"

this is must work because my vpn put ip and dns
"manual"

regard

https://social.technet.microsoft.com/Forums/en-US/adb3cf2a-366e-44b9-845c-e77944a92b35/properties-button-in-vpn-connection-windows-10-not-working?forum=windowssteadystate
Relevancy 48.59%

I was trying to set up an ad hoc network and toyed around with some of the wireless network settings. The network I was trying to set up didn't quite work out so I tried to set it back to how they were but forgot how they were.

Is there a way to delete the Wireless Network Connection and let it create a new one or is there a "standard" setting for this to strictly find a wireless network and connect to it?

I am running Windows XP Pro.

Any help or questions would be appreciated
 

Relevancy 48.59%

Hi Everyone I m trying to set up a home network between two computers Computer no has direct access to the internet via a modem connected using an ethernet cable computer no is the client computer which i want to connect to computer no so both computers have internet access I ve done this before but I ve encountered a message which is probably what is causing an error to occur when i run the network config wizard When I right click on the local Properties... Area Local Advanced Connection area connection icon and go to properties then go to advanced a message is displayed saying that i need to perform a system restore due to windows not being able to display the properties of the connection It then says that the WMI Windows Management Instrementation information has been altered modified I can t type out the message word-for-word due to it being in portuguese Normally this is where I would check a box to Local Area Connection Advanced Properties... allow other network users to connect through the computer s internet connection Can anyone explain to me why this message is being shown and how I may go about fixing this problem Thanks for your time - Tony nbsp

A:Local Area Connection Advanced Properties...

First off, why not use a broadband router? They're cheap, and they do this job MUCH better than ICS. If you must use ICS, try this repair first.

TCP/IP stack repair options for use with Windows XP with SP2.

For these commands, Start, Run, CMD to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

Reboot the machine.
 

https://forums.techguy.org/threads/local-area-connection-advanced-properties.593809/
Relevancy 48.59%

This is a good one!
Local area connection Properties are completely blank. No TCPIP, no Microsoft client, nothing. Can't add anything because it returns an error:
"Could not add the requested componet. The error is: The system connot find the file specified."

Cannot uninstall NIC. Returns error unable to uninstall
Cannot install a second NIC
Cannot install undated drivers
Cannot install any new windows networking services
 

https://forums.techguy.org/threads/local-area-connection-properties-blank.541764/
Relevancy 48.59%

Local area connection Properties are completely blank. No TCPIP, no Microsoft client, nothing. Can't add anything because it returns an error:
"Could not add the requested componet. The error is: The system connot find the file specified."

Cannot uninstall NIC. Returns error unable to uninstall
Cannot install a second NIC
Cannot install undated drivers
Cannot install any new windows networking services
 

https://forums.techguy.org/threads/local-area-connection-properties-blank.900883/
Relevancy 48.59%

When I view the properties for any of my connections I just get this If I go to quot Install - gt Protocol quot I get the message quot Could not add the requested component The error is The system cannot find the file specified quot When I tried installing Simple TCP IP Services in quot Add Remove Windows Components - gt Networking quot I got Dialog Properties items Connection in Missing the error quot Could not install the Simple TCP IP Services component because a file or registry entry is missing quot I ve tried updating my network adapter drivers resetting TCP IP using Winsock Fix and running SFC but have had no luck Also I m not sure if this is relevant but if I right click the Internet Connection icon and click Settings I get quot The Internet Connection Sharing computer is not configured to let network users control or disable the shared internet connection Missing items in Connection Properties Dialog quot Can anyone explain what might be causing this behaviour It doesn t seem to be causing any connection problems but I would like to be able to access TCP IP Properties to sort out a static ip I am using XP Home Edition SP nbsp

Relevancy 48.59%

Greetings everyone I have a problume with XP PRo Local Area Connection Properties not responding. When I Right Click on my network Paces go to properties..then right clisk on Local Area Connection go to properties.. I get the window Local Area Connection Properties up but nothing is displayed in the window. After a few it times out with Not responding. Any help.
Thank you

A:XP Local Area Connection Properties Missing

reinstall, have you just installed sp2

http://www.techsupportforum.com/forums/f10/xp-local-area-connection-properties-missing-12354.html
Relevancy 48.16%

I Network adapter properties could really use some help I have figured out what is causing my issue and will explain the best I can Relatively new network with wired desktop and wireless laptop through Netgear router I narrowed the issue down to Power Management of Network adapter properties the Wireless Network Adapter If the Wireless Network Adapter is set to its default properties including Power Management-- gt Allow the computer to turn off this device to save power when I fire up the laptop it connects right away but the problem is the Network Map is not correct the laptop doesn't show it's information including IPv If I manually uncheck and recheck the TCP Network adapter properties IPv box under Networking the network disconnects and reconnects and the map is good with the laptop showing its IPv address But if it goes back to sleep the next time it wakes Network adapter properties up and connects the map will be wrong So if I disable Power Management-- gt Allow this computer to turn off this device to save power the network map appears correct and the laptop shows it's IPv info problem is and it's a big one it takes one to two minutes to connect to the router So either I live with the wrong Network Map everything still is networked as I am using Homegroup or I live with a delayed connection to my wireless but the Network Map is correct This is a new laptop and I already reinstalled the Wireless Adapter there are no updates to the drivers I'm tempted to to do something related to TCP IP Perhaps reset it to default since there does seem to be some relationship to the IPv setting But I just don't know what to do at this point I'd really appreciate any help

A:Network adapter properties

Turn off that option to allow it to turn off the WiFi. If the system goes to sleep the WiFi will be turned off with it. If you are using the system you certainly don't want the WiFi to be turned off.

http://www.sevenforums.com/network-sharing/249807-network-adapter-properties.html
Relevancy 48.16%

Hi,
Please Help me to resolve this "ISSUE"

My wireless network Association, tab has changed completely to
Spanish, however, all other tabs remain in English
(authentication, connection). Also on the list of wireless
networks has information in Spanish (see images for details).
Its strange because I've never used Spanish EVER before in
anyway or form on my computer. I also reinstall wireless network
adapter Driver but problem is still There :-(

Please help me
Thanks in Advance
Regards
 

A:wireless network Properties

Who will help me to resolve this annoying problem!!!
 

https://forums.techguy.org/threads/wireless-network-properties.980220/
Relevancy 48.16%

Today, I turned on my secondary laptop (which hasn't been used in months) was greeted with a start up error which ended up needing to repair the "SYSTEM" boot partition . Now I got the system running but can't get any adapters to work. When I first logged in every network adapter had code 31(could not load driver). I was able to get around that by manually uninstalling each on and letting it re-install. Now each adapter has no properties so there is no internet connection at all. I mentioned the start up problem because I am not sure if the two are related at all.


Any help would be appreciated!

A:All network adapters have no properties.

Hi ben,

Did you install an updated version of the driver or the same one ? What is the exact model of the laptop
To get the model number enter this command


Code:
wmic computersystem get oemstringarray

http://www.sevenforums.com/network-sharing/283170-all-network-adapters-have-no-properties.html
Relevancy 48.16%

Hi,

I am having a lot of users. If there is some way to disable the Network Properties. then please inform, it will be very useful....my main objective is that users should not be able to see there Ip by Right Clicking on the Network Places icon or some other way
OS is Windows Xp...

Waiting for a positive reply...

Regards
 

Relevancy 48.16%

i cannot access the properties of my network connections, all i get is a popup window
saying "unexpected error has occured"
i've tried microsoft suggestion of registering ole32 and netshell but these did not help.
i've scanned with av and malwarebytes and nothing shows in event viewer at the times i
try to access the properties button of any of my network connections.
please help
thank you for your time

A:cannot access network properties

Dont know if you have a wireless connection or no, but have you read this from microsoft?? Here

http://www.bleepingcomputer.com/forums/t/272828/cannot-access-network-properties/
Relevancy 48.16%

Missing Remote Desktop Dialog Box in System Properties Running Under Windows 10 But I Can Still See Remote Assistance Dialog Box. What should I have to do ??

https://social.technet.microsoft.com/Forums/en-US/00e8491b-1d56-4bde-8c4f-a299333884da/missing-remote-dekstop-connection-in-system-properties?forum=w7itprogeneral
Relevancy 48.16%

Hello This issue already happened in Consumer Preview of Windows but after installing the Release Preview I still see this I have a WeTab GB tablet to run Windows After installing Windows CP I had to install Mobile Partner software in order to connect connect up 3G dial changed/no automatic connection properties to G After connecting once the connection showed up in the quot Networks quot part of the quot Settings quot charm Is was shown as a broadband connection Tapping it once enabled me to connect and check the box to connect automatically If I choose the quot Properties quot I was able to set it as a metered connection This all happened in the Metro UI 3G dial up connection properties changed/no automatic connect If I went to the quot Wireless quot tab of the quot PC Settings quot the connection was showing up as quot Mobile Broadband quot device For some reason I am not sure what changed at some point I don't see the connection in the quot Wireless quot tab of the quot PC settings quot anymore Next to that the icon in the quot Networks quot charm has changed it shows a phone Tapping it once only enables me to connect Tap and hold to view the connection properties sends me to the classic Windows desktop where a classic properties screen is being displayed I am not able to select to connect automatically I was hoping this would have changed after installing the Release Preview But after doing so and installing the Mobile Partner software it automatically included my settings So I still have this issue How can I change this back Thanks in advance

http://www.eightforums.com/network-sharing/6540-3g-dial-up-connection-properties-changed-no-automatic-connect.html
Relevancy 47.73%

Whenever I try to change my network connections I get the following error:

Cannot write phonebook.
Error 624: The system could not update the phone book file.
I am also having other issues that may or may not be related see threads:

http://forums.techguy.org/t294765.html
http://forums.techguy.org/t294528.html
http://forums.techguy.org/t294305.html

Thanks
 

https://forums.techguy.org/threads/cant-change-properties-of-network-connections.294815/
Relevancy 47.73%

I’m using Windows 2000 server, the NIC card as 2 ip address I’m trying to remove one of the address as I moved the Web Page to a different computer But when I right click on the network neighborhood I get the hourglass for 3 sec. And then nothing. I tried restarting the server in safe mode with network support (same result). I tried replacing the NIC Still I could not access the TCP/IP configuration. I’m wondering if there is a way to remove the address from the command prompt or some other way.

Thank you.

Sqwerty_L
 

https://forums.techguy.org/threads/network-neighborhood-properties-problems.68772/
Relevancy 47.73%

I believe I messed up the network settings on my machine not via the router but via control panel when you right click on the Local Area Connection gt Properties gt IPv IPv and some network reset properties? Completely all more places I can't remember and that's the problem Another thing is when I type ipconfig all I Completely reset all network properties? see that DHCP is not enabled and I remember it used to be enabled In IPv and IPv properties everything is set to automatically so I dont know why web pages take too long to load Mbps connection the rest of computers on the network are surfing the web fast I also get an error a few times a day where the little symbol of the LAN in the taskbar has a yellow exclamation mark and I need to right click and do the Troubleshoot problems and at the end I always get quot The default gateway was not available quot and it's fixed but keeps coming back I tried something I found on Microsoft help page and ran the following cmd netsh int ip reset c resetlog txt That didn't help

http://www.sevenforums.com/network-sharing/402610-completely-reset-all-network-properties.html
Relevancy 47.73%

If I change the folder properties accessing a shared folder (say pictures) over my home network, will it alter the folder's properties on the drive on which it resides or just the folder on the machine I am using to access the folder?

I am accessing my pictures folder on my desktop from my laptop from the other side of my house. The pictures and videos folders are set to "general items", the customize tab of the properties on the folder is set to "general items" when I access it from the laptop. If I switch the pictures to "pictures" and videos to "videos" on the laptop, will it alter the folder in the desktop on which the folder resides?

Hope this is clear enough, Thanks for any help, I have a hard time with sharing and permissions.

A:Folder properties when sharing over network

If you are able to connect to the folder, either locally or over the network, and managed to change it, then it will or should be changed. I'm sure you are not referring to doing ith with different user profiles, right? Best way is to try it and find out

http://www.sevenforums.com/network-sharing/50820-folder-properties-when-sharing-over-network.html
Relevancy 47.73%

Has anyone seen an issue with trying to access the properties of a network share and getting absolutely nothing? Just upgraded to Win10 from 7. We are in a windows 2008 domain with 2012 and Win 10 machines.
We have regular accounts and admin accounts. The regular account can see get properties for the folders/shares that it has access to. The admin account, when run using "run as a different user" cannot generate the properties dialog box at all. This worked fine on Win 7.

Any ideas?

http://www.tenforums.com/network-sharing/45581-windows-10-network-share-properties.html
Relevancy 47.73%

Hi,

I've had real trouble locating this particular window in Windows 10. The only way I can get to it is if I create a manual entry for a wireless network. In Windows 7 you used to be able to get to it for existing wireless networks that I had previously connected to. Does anyone have any idea how to get to it? Many thanks

A:Where is the Wireless Network Properties window from W7?

Settings app > Network & Internet > WiFi > Manage known networks. Select a network, click Properties

Wireless Network Profiles - See in Windows 10 - Windows 10 Forums

http://www.tenforums.com/network-sharing/70127-where-wireless-network-properties-window-w7.html
Relevancy 47.73%

Hi,
What can be keeping me from accessing Network Properties of my Dial-up?
I open the shortcut icon, then right-click on my dial-up, but nothing happens.
I have a working thread going ( in this forum titled Possible Bug? ) regarding a problem with Generic Host Process errors, and need to get into the properties to enable the simple Windows firewall, in SP1. I've tried in Safe Mode too.
Any help will be appreciated.
Thank you for your time,
patmac
 

A:Solved: Can't Access Network Properties

You will need to delete and recreate your dial-up connection. Make sure you save any phone numbers that it dials and any usernames/passwords.

I used to work tech support for earthlink, and that was the only thing we could do to resolve this issue.
 

https://forums.techguy.org/threads/solved-cant-access-network-properties.503478/
Relevancy 47.73%

When I go to my network connections and attempt to display the properties of my dial up modem properties(my default internet connection with MSN)...so that I can enable the firewall...nothing happens. Nothing. The computer doesn't hang, no error message pops up. It just doesn't respond. I have tried several times with this problem. Microsoft had me uninstall all of my network connections and then reinstall to see if that changed anything...but nothing. I had this issue once before but can't remember what I did to correct it.
I'm running Win XP on an AMD 850 Athlon PC Clone with 512MB RAM, with a 100GB HD.
If anyone has encountered this or can offer any help I'd be very grateful.
 

A:Dial up network properties won't display!

How are you access it? Have you tried within IE and selecting Tools, Internet Options, and the Connections tab?
 

https://forums.techguy.org/threads/dial-up-network-properties-wont-display.72479/
Relevancy 47.73%

I'm having major problems with my ip configuration settings I want to be able to use a fixed ip address and gateway for my wireless network connection The problem is that after I've properties BSOD network changing after changed the configuration of the IP version connection properties to the fixed ip I want to use and ok it My system crashes with a Stop error Bsod implicating the file tcpipreg sys as the culprit I ve tried disabling Ip version as I thought that maybe they were clashing somehow but other than that it seems I m stuck using DHCP which is annoying as the reason I am trying to switch off DHCP is to solve another problem Namely that Every BSOD after changing network properties time I BSOD after changing network properties start up my computer my connection shows Limited or no connectivity and I am forced to either Diagnose and Repair my connection or ipconfig renew in order to get an outside connection The adapter is a Realtek RTL and is an integrated device on my Asus P N -SLI Premium Motherboard

A:BSOD after changing network properties

I'm wondering if this helps anything.

This is from WinDbg.
Sorry it makes this such a long post.


Microsoft (R) Windows Debugger Version 6.8.0004.0 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Vista Kernel Version 6000 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6000.16575.amd64fre.vista_gdr.071009-1548
Kernel base = 0xfffff800`02000000 PsLoadedModuleList = 0xfffff800`0219af70
Debug session time: Fri Jan 11 12:23:45.207 2008 (GMT+0)
System Uptime: 0 days 0:12:38.097
Loading Kernel Symbols
............................................................................................................................................................................
Loading User Symbols
PEB is paged out (Peb.Ldr = 000007ff`fffd3018). Type ".hh dbgerr001" for details
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffa8007ed2ff8, 1, fffff98006b5dfef, 0}

Page 4ffb8 not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 500cb not present in the dump file. Type ".hh dbgerr004" for details
Page 500cb not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 500cb not present in the dump file. Type ".hh dbgerr004" for details
Page 500cb not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 4fdc9 not present in the dump file. Type ".hh dbgerr004" for details
Page 4fdc9 not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 4fdc9 not present in the dump file. Type ".hh dbgerr004" for details
Page 4fdc9 not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 5037a not present in the dump file. Type ".hh dbgerr004" for details
Page 4ff0a not present in the dump file. Type ".hh dbgerr004" for details
Page 4ff0a not present in the dump file. Type &qu... Read more

http://www.techsupportforum.com/forums/f299/bsod-after-changing-network-properties-210744.html
Relevancy 47.73%

Have three win xp machines on lan will search and find all three but while two will show the lan network properties, one wont . I need the properties of the netcard to set tcp/ip and dns .
have tried uninstalling the netcard no help! uninstalled xp networking components no help.
any help please Regards Alan G
 

Relevancy 47.73%

as you can see the properties button does not lit up and remains grey out although i click on IPV4, why is this happening? i was open it a few years ago

A:Unable to configure network properties

Have you done this? Change TCP/IP settings

http://www.sevenforums.com/network-sharing/282106-unable-configure-network-properties.html
Relevancy 47.73%

I am not able to access or change my network settings.

Windows XP Home SP 3

I do the following:

Start > Control Panel > Network Connections. Right click on Local Area Connection and choose Properties.

Then get these error message

"Some of the controls on this property sheet are disabled because one or more other Network property sheets
are already open. To use these controls, close all these property sheets and then reopen this one"

Tried rebooting, tried disabling local area connection then rebooting and re-enabling still no luck.

Only other thing I can think of is that I tried VMWare (new browser version) did not like and uninstalled it.

Any ideas would be appreciated.

A:unable to access network properties

For diagnostics: Boot in a safe mode with networking and try if it works....Begin tapping the F8 key every few seconds as the system boots up until the screen offering the Safe Mode option appears.

http://www.bleepingcomputer.com/forums/t/211109/unable-to-access-network-properties/
Relevancy 47.73%

hi
on a wwindows 7 machine the local area connection tcp ip v4 properties button is greyed out.
i have logged in as admininstrator .
it is also greyed out if i login with another account ..

i also get the following error





Quote:
There are not protocols installed or enabled. You must install and enable at least one protocol for this connection to work. Do you want to select a protocol now?


for refrence i have attached picture from a working computer. just to illustrate the problem.

please help

A:windows 7 local area connection ipv4 properties greyed out

So have you tried the Install button?

http://www.sevenforums.com/network-sharing/328719-windows-7-local-area-connection-ipv4-properties-greyed-out.html
Relevancy 47.3%

HI all am trying to change the ip address manually. to unbrick my router. so I go to my network and click properties to change the tcp ect. and the famous Unexpected error accured pops up. I try all the regsvr32 ect. stuff and nothing works. I have windows 8 pro. those anyone know how to fix this?

A:An Unexpected error accured Network properties

Is it really bricked or is it in limbo? I had one I thought was bricked, turns out i just had to wait it out to finish the firmware upgrade.

What model router is it?

Were you trying to install DD-WRT?

if you think that its just a configuration problem, then go to device manager and uninstall your network driver, then click on the action tab on top and click scan for hardware changes, and let windows reinstall them in their default settings. Now try your custom IP.

Did you do the 30-30-30 reset? (press and hold the reset button for 30 secs, unplug router, wait 30 secs, plug router in while still holding the reset, then after 30 more secs, release the reset.) Do not release the reset at any time, til the end.

If it has not completed the firmware upgrade then do not do the 30-30-30 reset until its done..

Brooklyn!

http://www.eightforums.com/network-sharing/25371-unexpected-error-accured-network-properties.html
Relevancy 47.3%

The probelm only happend on 1 win7 PC, suddenly the PC slow to open some network printer properties that also makes slow to print.

1. On the PC nstalled 3 Network printer A,B,C open B properties is normal fast, but slow to open A,C.
2. Others PC also installed those 3 network printer and No problem.

I have replace NIC, Reinstall/Repair Win7 but no success, How to trace/diagnose PC to Printer communication so I can figure out what the problem is.

Thanks

A:Slow open Network Printer Properties

Printer shares often work more quickly and efficiently with uPNP enabled in your router, depending upon exactly what you are calling a network printer...

http://www.sevenforums.com/network-sharing/208665-slow-open-network-printer-properties.html
Relevancy 47.3%

Just got a laptop with Vista Home and I want to install this onto my home network (MSHome) that has 5 other WinXP systems on that network. When the laptop was setup it chose a default network group called Workgroup or something like that and I cannot figure out how to get this computer navigated to the MSHome network.
 

A:Solved: Can't change home network properties

Control Panel (Classic view) - System - Advanced System settings -Computer Name.
Then "Change"
 

https://forums.techguy.org/threads/solved-cant-change-home-network-properties.729556/
Relevancy 47.3%

The wireless network properties box is missing. I have a Satellite pro 4600 with Linksys card for wireless and every thing worked once before. I replaced the hard drive with a new one and rebuilt the system. After installing the Cisco PEAP supplicant software to be able to logon at the college the box is now missing. I've tracked the problem to the PEAP software overwriting files on Win2000 sp4.
Or so the masters at M/S claim. Their advice was to reinstall Sp4. This didn't work. All of the information I have for configuring wireless cards for Win2000 show this box and it was there the firt time I set up the system. I have reformatted the hard drive twice then Installed Win2000 pro and the Sp3 and Sp4 using two different Install cds. I did not install the PEAP supplicant and still no box.

Thanks Rezehk
 

A:Win2000 pro wireless network properties box missing

Did you install ALL the motherboard drivers for the system?
 

https://forums.techguy.org/threads/win2000-pro-wireless-network-properties-box-missing.311041/
Relevancy 47.3%

When I click on the properties tab for my NIC in Workstation 4.0 I get "cannot configure software component" message, how do I resolve this? I am trying to figure out my network settings. IE: Full or Half Duplex.
 

A:Network Adapter Properties {Moved to Networking}

This isn't a tip or trick. I'm going to transfer this over to the Networking forum.
Check for updates there

Well, I can't seem to move it. I've alerted TechGuy and this thread will be moved shortly.

[This message has been edited by ich (edited 08-29-2000).]
 

https://forums.techguy.org/threads/network-adapter-properties-moved-to-networking.29049/
Relevancy 47.3%

I recently recovered from the Agobot worm and a couple other viruses (serv1ces.exe and microsoft.exe). However I noticed today that nothing shows up when I try to access the Device Manager or my Network Properties. Is there a way to rectify this?

Thanks in advance.
 

Relevancy 46.87%

Is there a freeware program to view WZC profile information from the command line? I found one that allows you to display the profiles themselves, however to display the profile properties I haven't found one.

I could also use direct registry edits if I had to, using the reg command. The problem being, that it would appear that the information is stored in binary format, which I've got no idea how to even manually pull the profile name from. The only thing that information seems to give me, is the abillity to later manipulate the order of the networks, that is maybe. I don't need that part yet, but will later on. I guess, since viewing the profiles is so slow, direct registry edits "might" be preffered. This is WZC I'm concerned about, not any third party utillities. I'm using Windows XP, and it's SP2 or later.
 

A:View Wireless Network Properties from the Command Line

Researching further, it looks like nobody knows how to pull the information from the registry. I've got Windows XP, so netsh wlan won't work. It looks like this is leaving me now with 2 solutions to get some of this information.

Solution 1: Use some kind of programming API to get the information and display it from the command line. I've therefore heard that there seems to be an interface called the WZC native API. If that's true, how would you use it in AutoIt or in a BATCH file or in a VBScript? I've never used anything like it before, so I need detailed explanations of what the code does, except for that doesn't mean I need to know all the internals of every function. But I need to know how to use it. I know BATCH files well, but I don't really know the full VBScript or AutoIt languages, though I can make some of it's code out anyway.

Solution 2: Somehow maybe use AutoIt in another way to read the properties from the dialog box. I know from research that this is probably possible, but I don't know how to do it. And what I need to do, is hide all that visible clicking going on, even if I'm doing some clicking. That is - hide it from the end user. It's nice to see it moving on the screen, but I'd rather not see it if I were the end user, in this case.

Now keep in mind, that at this point, all I'm trying to implement in these programs, is a way to do exactly what you can already do in Windows XP by default (but it has to be compatible with Windows XP Home, Pro, and MCE), except for from the command line. This is just one small part of a larger picture. I'll then be able to use that command in my other parts of my code that I need it in. So my general rule that I need to follow, is if you can't do it in the Windows XP dialog boxes, you can't do it in this program. If you CAN do it in the Windows XP dialog boxes, you CAN do it in this program. But everything is from the command line, in the end result. If Windows XP already provides a command line, which in this case it doesn't, I should use it. If that's not possible, I should use the registry, but I guess that's not possible if nobody knows how. If that's not possible, I guess I'll try to use a VBScript, and if that's not possible, I'll try to use AutoIt. But the end result is a command line program.

I hope this starts to get me down the right track. It took this weekend to find this information so far.
 

https://forums.techguy.org/threads/view-wireless-network-properties-from-the-command-line.774772/
Relevancy 46.87%

Originally posted by navguy how can i fix the following error message quot the system cannot log you on this domain because the systems computer account System of Network Properties Win2kPro: Missing Identification Tab out in it s primary domain is missing or the password on that account is incorrect quot I have already created user accounts on the pdc but i cannot logon using my domain admin account I logon using the local sys admin account and i can see the domain controller and all it s shared files but when i try to log in using my domain account i get the message above Any help would be appreciated Navguy I was able Win2kPro: Missing Network Identification Tab out of System Properties to fix the problem For those that Win2kPro: Missing Network Identification Tab out of System Properties ever see the problem here is the fix just remove you workstation from the domain and then add it to the domain again Right click network neighborhood in the identification tab click on change then just click on workstation apply you do not have to reboot then just click on change again then add it to the domain and that s it Click to expand Well has anyone ever seen a W K Pro computer in a similiar situation with the identification tab missing I am able to log on as the local admin so I can change the computer name to join the domain but the tab is missing I know I am in the right spot but not sure why it s not Thanks nbsp

A:Win2kPro: Missing Network Identification Tab out of System Properties

https://forums.techguy.org/threads/win2kpro-missing-network-identification-tab-out-of-system-properties.150673/
Relevancy 46.87%

Hello: I have three PC?s in my home office connected by a Network.

On one of the PC?s, I see the Network ID is greyed out on ?system properties?.

I already have followed all the known troubleshoot procedures:
1. Enable Network Discovery
2. Uninstall, reboot and install Microsoft Networks Client
3. Run sfc /scannow

However, the Network ID remains greyed out.

Anybody can bring new lights on these.

Thanks

A:Network ID greyed out on “system properties” Windows 7 Ultimate

  
Quote: Originally Posted by Dinamicor


Hello: I have three PC?s in my home office connected by a Network.

On one of the PC?s, I see the Network ID is greyed out on ?system properties?.

I already have followed all the known troubleshoot procedures:
1. Enable Network Discovery
2. Uninstall, reboot and install Microsoft Networks Client
3. Run sfc /scannow

However, the Network ID remains greyed out.

Anybody can bring new lights on these.

Thanks


Please run ?Services.msc? and navigate to Workstation service; ensure the service is enabled and started, or restart the service. Then try again.

Try using a domain administrator account (regarding appropriate permissions for network administration).
The local administrator account only has administrative access to local resources on the PC - i.e. does not have administrative privileges on the network
Regarding access and use of a domain administrator account:
I.e. you're a user at your company - so you should contact your companys system administrator regarding company policy.

I.e. if this is BYOD (your own device) it will probably not be joined to the domain.
If its a company workstation (laptop) - he will rejoin it to the domain.

As a rule of thumb - and may be confusing you here, do not expect yourself - even though a superuser with local administrative privileges - to finalize redeployment of windows, apps and data in a company domain. I.e. in a company you usually don't control access to payrolls etc. (you should not have that kind of administrative configuration access - even if a company owner you could mess things up giving "unauthorized" access. Even a domain administrative account is not used as a "user" account - only configuration). I.e. with user accounts i.e. local administrator you don't control access to private network ressources in the company. I.e. you cannot join network ressources - joining to a domain means connecting with the private web service in the company basically controlling identification and internal access to company wide resources. So that service hides some complexity as well.

Delegate the job to your companys system administrator and let him complete the work if this is a company workstation
... that you may have reinstalled yourself using the local administrator account without using the companys deployment services - i.e. automated deployment (i.e. PXE network boot to the companys Windows Deployment Services or Symantec Altiris etc.). If no automated deployment is available at your company then the component (responsibility) of deployment services are manually executed by the system administrator (automated deployment availability at your company will typically depend upon complexity i.e. the number of computers owned by your company - but even for a small number of workstations the benefit of Windows Deployment Services is great ...)
Basically, the finalization of software configuration for a company managed computer must in part be managed by the system administrator, i.e. rejoining the computer to a domain - which effectively means the administration of the computer from this point on is delegated to the domain controller and thus automated management of i.e. authentication and authorizations.

http://www.sevenforums.com/network-sharing/366038-network-id-greyed-out-system-properties-windows-7-ultimate.html
Relevancy 46.87%

Whenever I select my wireless adapter right click and choose quot Properties quot the properties window freezes and results Viewing freezing. properties network adapter a in along with Viewing a network adapter properties results in freezing. it the explorer Viewing a network adapter properties results in freezing. window Some time ago I had disabled a bunch of services some of which were related to networking I had done so because they were causing intensive CPU use problems while they were being loaded I realize now I should of set them to manual and I have set as many as I can remember to manual but the problem still exist Is there something else I could try to undo this problem and aside from this everything else works fine with no internet or network problems nbsp nbsp Quote Originally Posted by vpwin Name --Description ----Status ------Startup Type --------Log On As ActiveX Installer AxInstSV --Provides User Account Control validation for the installation of ActiveX controls from the Internet and enables management of ActiveX control installation based on Group Policy settings This service is started on demand and if disabled the installation of ActiveX controls will behave according to default browser settings ------Manual --------Local System Adaptive Brightness --Monitors ambient light sensors to detect changes in ambient light and adjust the display brightness If this service is stopped or disabled the display brightness will not adapt to lighting conditions ------Manual --------Local Service Adobe LM Service --AdobeLM Service ------Manual --------Local System Akamai NetSession Interface --Provides networking protocol and file transfer technologies If the service is stopped those applications that depend on the service may fail to transfer files or otherwise function properly ----Started ------Automatic --------Local System Apple Mobile Device --Provides the interface to Apple mobile devices ----Started ------Automatic --------Local System Application Experience --Processes application compatibility cache requests for applications as they are launched ----Started ------Manual --------Local System Application Identity --Determines and verifies the identity of an application Disabling this service will prevent AppLocker from being enforced ------Manual --------Local Service Application Information --Facilitates the running of interactive applications with additional administrative privileges If this service is stopped users will be unable to launch applications with the additional administrative privileges they may require to perform desired user tasks ----Started ------Manual --------Local System Application Layer Gateway Service --Provides support for rd party protocol plug-ins for Internet Connection Sharing ----Started ------Manual --------Local Service avast Antivirus --Manages and implements avast antivirus services for this computer This includes the resident protection the virus chest and the scheduler ----Started ------Automatic --------Local System Background Intelligent Transfer Service --Transfers files in the background using idle network bandwidth If the service is disabled then any applications that depend on BITS such as Windows Update or MSN Explorer will be unable to automatically download programs and other information ----Started ------Manual --------Local System Base Filtering Engine --The Base Filtering Engine BFE is a service that manages firewall and Internet Protocol security IPsec policies and implements user mode filtering Stopping or disabling the BFE service will significantly reduce the security of the system It will also result in unpredictable behavior in IPsec management and firewall applications ----Started ------Automatic --------Local Service BitLocker Drive Encryption Service --BDESVC hosts the BitLocker Drive Encryption service BitLocker Drive Encryption provides secure startup for the operating system as well as full volume encryption for OS fixed or removable volumes This service... Read more

A:Viewing a network adapter properties results in freezing.

Can you share with us your list of services, and if they are enabled/manual/disabled or whatever. We may notice one more that might need to be enabled.

Once that's ruled out we can look at other causes? Any suggestions any1?

http://www.sevenforums.com/network-sharing/91559-viewing-network-adapter-properties-results-freezing.html
Relevancy 46.87%

English is not my native tongue Network printer issue properties/advanced settings I apologize for any misspells or Network printer properties/advanced settings issue similar in advance I m connected to a Konica Minolta C network multifunction printer I have never had any similar issues with any other of my printers Let me also say I work in traditional Desktop view I have no issue printing not once did it refuse a print job Issue below are not tied to a specific software I ve experienced it in software from at least Microsoft Autodesk Adobe Foxit When opening Print Dialog I am mostly not allowed to go to Printer Properties Printer Advanced Settings I say mostly because every now and then I am allowed When hitting the Properties button my system freezes A popup dialog box appears stating different things but the last couple of times it has been A RPC Remote Procedure Call could not get through Or similar remember I m not using an Network printer properties/advanced settings issue English system I hit OK At this point the software is frozen and locked I have to go via Task Manager and Kill Task Meanwhile all other running programs are not affected So the story above could just as well include a slightly different popup dialog box message but the problem is the same I can always print with my standard settings but if I want for example multicolour or duplex I have to have a separate printer installation for that So if I go to my Control Panel - gt Units and Printers I do actually face the exact same problem I enter C Printer Settings but if I now try to go to Printer Properties Printer Advanced Settings everything freezes for a second flashing in system background colour and I m back to Desktop view Then if I update reinstall my printer driver everything suddenly works like a charm I don t really know if it works for a specific amount of times entries a specific amount of time or until next system restart As said I could make a number of printer installations like Simplex B W Simplex Colour Duplex B W and Duplex Colour But I want to understand what is wrong too Win x C driver Resultat av download - KONICA MINOLTA Sverige Thank you so much for your interest in my problem

http://www.eightforums.com/drivers-hardware/32297-network-printer-properties-advanced-settings-issue.html
Relevancy 46.87%

i have a laptop Toshiba A200-13R (core duo 2.0(T2450) ghz, 512+2 Ram
(667mhz) 160GB hdd). As a factory product it came with vista home basic. I
installed xp proffessional as dual os. Both were working fine. 3 days before
i have bought ram to upgrade but that is bad system was giving plenty of
errors so i replaced the old Ram. after that if i connect the network cable
before starting the system it is working fine. if i start without network
cable connected system is neither opening the network connections nor the
system properties. i tried the following

* Restored from the restore points before upgrading the ram
* Tried to reinstall the LAN Driver it's not able to update the driver
* Tried to update windows xp but it's not responding and staying the step
Collecting informations for ever.

so please help me
 

https://forums.techguy.org/threads/xp-prof-not-able-to-open-network-connections-and-system-properties.622399/
Relevancy 46.87%

I'm running windows 2000 server with SP2 on a Compaq Proliant 1600 with an embedded NIC. I noticed that the ethernet adapter does not show up in the My network places properties. I have tried to get it back with tweekUI, Removing it from Device manager and reinstalling it, and ran an in-place upgrade. I have also disable the embedded NIC and tried adding a new PCI ethernet adapter, it too fails to show up. I can see the card in the command line. I have tried the netsh command to tie an IP address to the adapter and made it persistant, but the changes are lost on mandatory reboot. In order to keep the server up and running I have made it a DHCP client so I can use the machine. All comments are welcome on this one.
 

A:NIC card doesn't show in My Network Places properties

**** UPDATE **** I found a MS KB article on this and it was the dcom issue that eas the problem
http://support.microsoft.com/?kbid=254631:cool:
 

https://forums.techguy.org/threads/nic-card-doesnt-show-in-my-network-places-properties.120098/
Relevancy 46.44%

Hello I know this is a long shot I m staying in what s basically a hotel for the next couple months I was properties - Internet to access can't but network, network Connected access no on their free wireless Connected to network, but no Internet access - can't access network properties networks up until a couple of days ago when it just cut off my internet access all of a sudden They have confirmed it s nothing on their end My roommates have had steady access on their computers no problem my iPhone as well I obviously have no access to their modem to make issues more difficult when I right-click any of the network connections a dialog box will appear but all the menu options are blank I can t do anything to the connections except rename them Anything else yields a message box with no message if there s any other way to access the TCP IP properties that would be great Right-clicking the connection and clicking properties is the only way I know of I have tried winsock repair uninstalling reinstalling wireless driver and just about everything else I could think of ipconfig all gives me the following output Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users Owner gt ipconfig all Windows IP Configuration Host Name Owner-PC Primary Dns Suffix Node Type Mixed IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List bc hsia telus net Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix bc hsia telus net Description Atheros AR Wireless Network Adapter Physical Address - - - - -BB DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ee bcd Preferred IPv Address Preferred Subnet Mask Lease Obtained July- - PM Lease Expires July- - PM Default Gateway DHCP Server DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Anchorfree HSS Adapter Physical Address -FF- - - - A DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description TAP VPN Adapter Physical Address -FF-E - - B-A DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek RTL E Family PCI-E Fast Ethern et NIC NDIS Physical Address - E- - B- -EB DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap cgocable net Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap McMaster CA Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap EB EB - D- C - B -CDD br B Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap no-domain-set bellcanada Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap FE-CEA - DD-B CE- CA C br D E Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap E BA - D E- C A-AD -B br E F Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - E- DHCP Enabled No Autoconfiguration Enabled Yes IPv Address e c b ecb b c ... Read more

A:Connected to network, but no Internet access - can't access network properties

Appears you are on Vista ( Microsoft Windows [Version 6.0.6001] )

and running from an Admin Login (ie Owner and other than maintenance, you should be using a Limited Account, eg: UAC but solve that latter)

Disconnect from the router
Goto Control Panel > Network and Internet > Network Connections.
Right click on ?Local Area Connection? & click ?properties? option.

scroll and find the Internet Protocol V6
clear the [x] preceeding that line
click ok

get a command prompt (run->cmd) and enternetsh int ip reset
netsh interface ip delete arpcache
ipconfig /flushdns

 

http://www.techspot.com/community/topics/connected-to-network-but-no-internet-access-cant-access-network-properties.149976/
Relevancy 46.44%

Hi,

I recently updated the driver for this network adapter, went from version 18.8 to 21.0. When I go to Device Manager > Network Adapters > Intel Ethernet Connection I217-V, it seems like the properties window for that adapter takes about 5-6 seconds to open and certain tabs like General/Link Speed/Advanced/Power Management/Teaming/VLANs take a few seconds to load after clicking on them.

Is this normal? I can't remember if the window for this adapter was faster loading on previous versions of the driver.

http://www.sevenforums.com/drivers/397706-intel-i217-v-network-adapter-properties-slow-open.html
Relevancy 46.44%

I am running Windows 7 Ultimate, SP1, on an HP G60-120US laptop.  I have an Atheros AR5009 wireless adapter.
I have no problems with internet access.  However, in Network and Sharing Center I left click on "change adapter settings", right click on Wireless Network Connection, and then left click on Properties I get an error box that says "An unexpected error occurred."  I tried to do a clean boot using MSCONFIG but that did not work.  I tried to uncheck the "Load startup items" box but after restarting it was shaded solid again.  I then tried to check the "Diagnostic Startup" radio button and then click on "apply" but it jumps right back to selective startup.  Can you please help me clean my laptop?
 
 

http://www.bleepingcomputer.com/forums/t/603920/cant-change-wireless-adapter-properties-in-network-connections-windows-7/
Relevancy 46.44%

This single computer on my network loses DNS information every time Windows auto-updates, thus losing connectivity. When I go to Network Properties, the DNS fields are blank. Updates are the only time this happens, and this is the only machine it happens on. I simply reset the settings, and everything is fine ... until the next update.

I am assuming there is some setting on this box that does this. Is anyone familiar with this situation, and can you point me in the right direction?

Thanks,

TBF

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 4 Stepping 9
Processor Count: 2
RAM: 502 Mb
Graphics Card: Intel(R) 82915G/GV/910GL Express Chipset Family, 128 Mb
Hard Drives: C: Total - 1430765 MB, Free - 1403851 MB; I: Total - 305195 MB, Free - 290812 MB;
Motherboard: Dell Inc., 0JC474
Antivirus: None
 

https://forums.techguy.org/threads/network-properties-dns-info-blanks-after-windows-auto-update.1057277/
Relevancy 46.44%

So on windows 7 when you "Manually create a network profile" and close you can see a list of on networks via the gui and modify them as needed. However i am unable to find this on windows 8 and newer. I know the profile is there via the command
"netsh wlan show profiles" but am unable to get back into the properties in the gui.
Please advise.

https://social.technet.microsoft.com/Forums/en-US/964e429f-678b-4d25-bf88-88d40b7677e5/create-network-profile-then-close-unable-to-get-back-to-properties?forum=w8itprogeneral
Relevancy 44.29%

Referred from here http www bleepingcomputer com forums t experiencing-rundll-error-windows-on-start-up OBThis all started when my BF clicked on a fake virus alert He scanned the computer right away with MBAM and caught various things but even when we rebooted webpages Properties for Network start windows locked, up, error Rundll and Connections redirect. open on certain programs couldn't start up Firefox was fixed with help from the apartment complex's service provider but SAS couldn't get Updates and I've had to reinstall AVG Free Ed I've also reinstalled IE and Yahoo IM which were outdated and had start up and log in problems because of the infection Uniblue Registry Booster does not seem to have any problems starting and Properties for Network Connections locked, Rundll error windows open on start up, and webpages redirect. functioning Since then I've caught a few things with MBAM SAS and AVG but the system is definitely not clean yet I still get redirects and trojans or roguewares pop up from time to time that are caught by AVG FREE EDITION While trying to get rid of the RUNDLL error windows with Moderator boopme I discovered I could not access the Properties button or Right-Click Properties for Network Connections A Network Connections window pops up that says unexpected error occurred I was instructed to post here using - of the Preperation Guide I tried to make a GMER log but the Properties for Network Connections locked, Rundll error windows open on start up, and webpages redirect. first time through AVG prevented it from going past a certain point After disabling AVG temporarily it finished quickley but froze before I could save the log and while I was trying to enable the AVG Resident Sheild The third scan took much longer than the second scan but ended in a blue screen that said there was a problem detected and that Windows had to shut down to prevent damage A file was listed pwtdipog sysUnder it was PAGE FAULT IN NONPAGE AREARestart instructions were included there after followed by Technical Information whiich I can post if needed Here are my logs from Steps DDS Ver - - - NTFSx Run by Gina at on Thu Internet Explorer BrowserJavaVersion Microsoft Windows XP Home Edition GMT - AV AVG Anti-Virus Free On-access scanning enabled Updated DDD - FF- F- E B- D D BF Running Processes C WINDOWS system Ati evxx exeC WINDOWS system svchost -k DcomLaunchsvchost exeC WINDOWS System svchost exe -k netsvcsC WINDOWS system svchost exe -k WudfServiceGroupC Program Files AVG AVG avgchsvx exeC Program Files AVG AVG avgrsx exeC Program Files AVG AVG avgcsrvx exesvchost exesvchost exeC WINDOWS system spoolsv exeC WINDOWS system Ati evxx exeC Program Files Uniblue RegistryBooster rbmonitor exeC WINDOWS Explorer EXEC Program Files ATI Technologies ATI ACE cli exeC PROGRA AVG AVG avgtray exeC WINDOWS system ctfmon exeC Program Files Adobe Acrobat Reader reader sl exesvchost exeC Program Files AVG AVG avgwdsvc exeC Program Files Java jre bin jqs exeC Program Files Common Files Microsoft Shared VS Debug mdm exeC WINDOWS System svchost exe -k HPZ C WINDOWS System svchost exe -k HPZ C Program Files Alcohol Soft Alcohol StarWind StarWindService exeC WINDOWS system svchost exe -k imgsvcC Program Files AVG AVG avgnsx exeC WINDOWS system wuauclt exeC Program Files ATI Technologies ATI ACE cli exeC Documents and Settings Gina Desktop dds scr Pseudo HJT Report uStart Page hxxp neko-sentai com uSearch Bar hxxp us rd yahoo com customize ie defaults sb msgr http www yahoo com ext search search htmlmStart Page hxxp www yahoo comuInternet Settings ProxyServer http uInternet Settings ProxyOverride uSearchURL Default hxxp us rd yahoo com customize ie defaults su msgr http www yahoo comBHO D -C F - efb- B - ECA - No FileBHO Adobe PDF Reader Link Helper e f-c d - d -b d- b d be b - c program files adobe acrobat activex AcroIEHelper dllBHO AVG Safe Search ca f - f e- b -a e- e e c c - c program files avg avg avgssie dllBHO Skype add-on for Internet Explorer ... Read more

A:Properties for Network Connections locked, Rundll error windows open on start up, and webpages redirect.

Hello Kou_Kagerou, My names Syler and I will be helping you to solve your malware issues. Sorry for the delayin replying, we are very busy at the moment.Please note we are very busy, so if I don't hear from you within 5 days the topic will be closed, If you have since resolved your issues I would appreciate if you would let me no so I can close this topic.Download and Run MBR Rootkit Scan Please download MBR Rootkit Detector and save it on your desktop. Go to Start >> Run then copy and paste the following line into the run boxcmd /c "%userprofile%\desktop\mbr.exe" -t& start mbr.log Select Run when you recieve a Security Warning The process is automatic, a black DOS window will appear and disappear suddenly. This is normal. A log file will the be created on your desktop where you ran mbr.exe from. Copy and paste the contents of mbr.log on your next reply.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Under the Custom Scans/Fixes box at the bottom, paste in the following bold text.%systemroot%\system32\*.dll /lockedfiles%systemroot%\Tasks\*.job /lockedfiles%systemroot%\System32\config\*.sav%systemroot%\*. /mp /s%SYSTEMDRIVE%\*.exenetsvcsmsconfigdrivers32CREATERESTOREPOINTPush the button.Two reports will open, copy and paste them in a reply here:OTL.txt <-- Will be openedExtra.txt <-- Will be minimizedThen please post back here with the following logs: MBAM log mbr.log OTL.txt Extra.txtThanks

http://www.bleepingcomputer.com/forums/t/333978/properties-for-network-connections-locked-rundll-error-windows-open-on-start-up-and-webpages-redirect/
Relevancy 43.86%

Hi I have a folder of home videos that I 6.41Gb says says folder 2.67Gb, properties properties *.* back up to a USB key with Syncback The key is nearly full and I'm trying to reduce the size of that folder But here's the thing If I folder properties says 2.67Gb, *.* properties says 6.41Gb right-click on my 'Home videos' folder and select 'Properties' it tells me I have files in folders taking Gb However if I open the folder and search for to show all the files then select all right-click 'Properties' it tells me I have files in folders taking Gb Still at the bottom of the Windows Explorer window it says items selected This is the case on both the folder in My Documents on the PC and also the matching folder on the USB key Treesize also shows Gb for both folders In fact as far as I can figure what with everything else on the same USB key there wouldn't even be room for a Gb folder I've tried showing both hidden and system files and folders but there's nothing extra to see Can anyone please explain this anomaly I must be doing something wrong but I can't figure it out

http://www.sevenforums.com/general-discussion/399832-folder-properties-says-2-67gb-properties-says-6-41gb.html
Relevancy 43.43%

Hello Please help I have been trying to quot fix quot this issue on my laptop IP Valid Con Area Connection/Wireless a Have Local Solved: Network Connection Doesn't for the past month on and off I have been using other sources to access the internet reading up on resolutions on this issue and all kinds of forums I am knowledgeable but not able to understand some of the fixes and terms that I have come across I feel like I ve tried everything and still I cannot access the internet on my PC wired or wireless I have a Toshiba Satellite L -GS I tried to release amp renew my ipconig Solved: Local Area Connection/Wireless Network Connection Doesn't Have a Valid IP Con Please see below for ipconfig Please help C windows system gt ipconfig release Windows IP Configuration No operation can be performed on Local Area Connection while it has its media disconnected Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Link-local IPv Address fe c ee b d Default Gateway Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter isatap hsd nj comcast net Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter isatap D E -E CD- F - -AE A Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix C windows system gt ipconfig renew Windows IP Configuration An error occurred while renewing interface Wireless Network Connection unable to contact your DHCP server Request has timed out No operation can be performed on Local Area Connection while it has its media di sconnected C windows system gt ipconfig all Windows IP Configuration Host Name jpharvey -PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL SE Wireless LAN n PC I-E NIC Physical Address - -B -B -B - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c ee b d Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - C- C- - - - C- C- -E DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address - - C- C- -E DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap hsd nj comcast net Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap D E -E CD- F - -AE A Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:Solved: Local Area Connection/Wireless Network Connection Doesn't Have a Valid IP Con

https://forums.techguy.org/threads/solved-local-area-connection-wireless-network-connection-doesnt-have-a-valid-ip-con.1016512/
Relevancy 43.43%

Reloaded xp on dell Latitude d610 - reloaded all drivers. Network connection states excellent connection however browsers state no connectivity.
 

A:Network connection states excellent connection but browsers state no connectivity

https://forums.techguy.org/threads/network-connection-states-excellent-connection-but-browsers-state-no-connectivity.991690/
Relevancy 43.43%

Cannot connect to home wireless network with Toshiba Satellite laptop running Vista with SP2. Other family wireless devices working fine and good internet connection using ethernet cable from my laptop to router.

Problem just started today after trying public free wireless in airport early today. Would not connect and got a security certificate warning on another free internet network. So, did not use. Internet worked fine tethered to my phone.

I have an internal wireless g card and a usb plug-in wireless n adapter. Neither one works now. In network status section of control panel shows good network connection but red X before internet connection icon.

I ran a Norton scan and Malwarebytes scan in safe mode with no issues. Also tried to connect wireless in safe mode with no success.

Lastly I did system restore to a few days ago when wireless connection was working fine. No success there either.

A:[SOLVED] Good wireless network connection but no internet connection

you have not accedently switched OFF the wireless at all

can we see an ipconfig /all and ping tests and an xirrus screen shot

also delete all the profiles

------------------------------------------------------------------------

How to remove Wireless Profiles
Removing an existing wireless "profile"
b]- Vista/Windows7:[/b]
FAQ - Welcome to TP-LINK
- delete the wireless profiles
Start> control Panel> classic view> network and sharing center> manage wireless networks

Delete the profiles
you will then have to enter the wireless security key for any networks you connect to - so make sure you know the correct password , and not using an incorrect password at all

------------------------------------------------------------------------

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

Start> Run {search bar in Vista}> CMD to open a DOS window and type:

Type the following command
Ping {plus the number thats shown against the default gateway shown in above ipconfig /all}
Post back the results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping google.com
Post back the results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping 209.183.226.152
post back results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Quote:




For your information only
these tests will check various stages of the connection, the first ping test, ping default gateway checks to see if you still have a connection to the router the next two
Ping google.com & Ping 209.183.226.152 tests the connection to internet , one by name and one by number which checks that the dns is working





------------------------------------------------------------------------

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

Xirrus: High Performance Wireless Networks - Advanced IT Wi-Fi Networking Tools
Direct link to the program is here Xirrus: High Performance Wireless Networks - Advanced IT Wi-Fi Networking Tools
Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need NET Framework installed for the ... Read more

http://www.techsupportforum.com/forums/f217/solved-good-wireless-network-connection-but-no-internet-connection-599619.html
Relevancy 43.43%

I have a Windows 7 Home Premium computer that is not connected to the internet. I have checked the drivers and they are all installed correctly and operational. When I go into the adapter settings there is no Local Area Connection adapter. I have included some screen shots of what I am seeing if they help.

-Chris

A:Local Area Connection missing from network adapters, no connection

Welcome to the Seven Forums.

In that computer management window (while Device Manager is selected in the left pane), select View from the menu bar. Then uncheck View hidden devices. Do you see any Network adapters now?

http://www.sevenforums.com/network-sharing/295663-local-area-connection-missing-network-adapters-no-connection.html
Relevancy 43.43%

Somehow I've managed to do something that prevents me from entering the Local Area Connection Properties window. When I do I get a message, "The controls on this property sheet are disabled because one or more other property sheets are already open. To use these controls, close all these sheets and reopen this one."
Who ever hear of property sheets? At this moment I can't access the internet due to (I think) an impoperly set component in the Local Area Connections window. Thanks, I think, to McAfee putting a Firewall component in there.

Puzzled and Frustrated.
 

A:"Property Sheets" in Local Area Connection Properties

When you right-click on an object, i.e. Local Network Connection, and select Properties, it opens the Propertiy Sheet for that object. You may be correct that the firewall has controll of the properties for the NIC and therefore the system won't open the properties again until the first instance is closed. Try opening your services from the Computer Management MMC and stop the McAfee services relating to the firewall. See if you can then see the properties of the network connection. If so, you have found the culprit. What to do about it as it will probably take control again when the services are restarted, I don't know as I don't use McAfee's firewall. If you can remove it, Agnitum has a free firewall that works very well. I have satelite connection and have not had an issue with either doing what I want or getting hacked.
 

https://forums.techguy.org/threads/property-sheets-in-local-area-connection-properties.96323/
Relevancy 43%

Hello all - I just purchased a Gigabyte GA-EP45-DS3R motherboard, which replaced my ASUS P5Q that died.

After I loaded all of the drivers (using Vista x64), the first thing I noticed was my LAN connection speed was signifcantly slower than on the ASUS. So I started poking around in the Realtek "advanced configuration" properties. I changed one item:

1) Flow control - from "enabled" to "disabled"

After making the change my speed jumped significantly. However, that brought me to the question of if I need to change any of the other settings? Are there settings to be made for ultimate LAN performance?

http://www.vistax64.com/network-sharing/178881-any-tweaks-local-area-connection-properties.html
Relevancy 43%

I am try to manually install BitDefenders Firewall Module which requires me to add a "Service". When I open Internet Connections Properties and click on Install - Service - I get an error msg "Could not add the requested component. The error is: The specific path does not contain any application device INF's." I tried it on my desktop computer also running XP Pro SP2 and it allows me to Browse to the appropriate program file. Any suggestions? Thanks

A:Can't Add "Service" in Local Area Connection Properties

did you ever sort this out without reinstalling windows ?

Mike



Quote:





Originally Posted by mrud


I am try to manually install BitDefenders Firewall Module which requires me to add a "Service". When I open Internet Connections Properties and click on Install - Service - I get an error msg "Could not add the requested component. The error is: The specific path does not contain any application device INF's." I tried it on my desktop computer also running XP Pro SP2 and it allows me to Browse to the appropriate program file. Any suggestions? Thanks

http://www.techsupportforum.com/forums/f10/cant-add-service-in-local-area-connection-properties-203205.html
Relevancy 43%

Please look at the following image.. what's this little internet connection icon for? it exist there and I can't remove it.. And I access the setting of connection... it pop out following error message....

A:Network Icon "Internet Connection" appear under network connection

Quote:




By default, the Internet Gateway Device Discovery and Control Client is installed on a Windows XP Professional computer. The Internet Gateway Device Discovery and Control Client starts the Simple Service Discovery Protocol (SSDP) Discovery service, that listens on port 1900 for NOTIFY directives. NOTIFY directives are messages that advertise the availability of UPnP-capable devices on the network. If you do not require the functionality of the Internet Gateway Device Discovery and Control Client, you can remove the client from your computer. Doing so can help lower the risk of Internet-based attacks to port 1900 on your computer.




Read more here....
http://www.ehow.com/how_4526935_remo...nnections.html

and here:
http://www.ehow.com/how_4526935_remo...nnections.html

http://www.techsupportforum.com/forums/f10/network-icon-internet-connection-appear-under-network-connection-302237.html
Relevancy 43%

Hi,

I really had not this 'Bluetooth connection' before.
But, I really don't know that pairing my Nokia Bluetooth with my HP Laptop Bluetooth would add this Bluetooth connection or NOT.
I really guess this Bluetooth Connection was listed there when I connected my Lapotp Bluetooh with Nokia Bluetooth.
Thus, I will really not have any problems if I deleted it. But I am asking you what benefit of that Bluetooth Connection.
This is below was not here:

Finally Could please let me know how to use this Bluetooth Connection.(How to benefit from it)? I really use an ADSL Internet subscription, and not Dial-up connection. Also, I am connected wirelessly to a Modem-Router. Thus, what password and username should I type in the fields in the above screen shot?

A:'Bluetooth connection' is shown in my Network Connection suddnly.

Pairing a mobile phone will create such an entry and there's nothing to worry about. I don't think you can use it to go online since as you said you are using ADSL and if you want to go online via your modem with your phone just use the wifi connection

http://www.sevenforums.com/network-sharing/352169-bluetooth-connection-shown-my-network-connection-suddnly.html
Relevancy 43%

Hi everyone I work in an office where we have a main desktop computer which is connected to the internet via a Time Warner modem The modem is connected by cable to a netgear wireless router and up until today there have been no problems connecting to the internet from internet connection network Wireless lost connection the laptops that use the wireless connection Today for no reason with no changes upgrades or anything different at all I am now getting the message that my laptop sees the wireless network but claims the network has no internet access not true I am able to connect to the internet from the desktop which is where I'm typing from So we have internet coming into the office and the desktop but suddenly the router isn't broadcasting the wireless signal any more Wireless network connection lost internet connection I ran windows network diagnostics several times and I've gotten different responses one said quot wireless connection doesn't have valid IP configuration quot another said quot the default gateway is not available quot and quot tourbleshooting couldn't identify the problem quot I'm reasonably computer savvy and I can follow instructions so does anyone have any ideas where I should start Many thanks Caroline

A:Wireless network connection lost internet connection

The first thing to try is to power everything off, Cable mode, router and computers. Then power them on again in sequence. Cable modem, router then computer. Let each device settle down before going on to the next.

http://www.sevenforums.com/network-sharing/118734-wireless-network-connection-lost-internet-connection.html
Relevancy 42.57%

I just ran the Windows XP Help and Support, Network Diagnostics and I got a FAILED for the following areas:
Network Adapters FAILED
[00000010] Intel(R) PRO/Wireless 3945ABG Network Connection FAILED
DNSServerSearchOrder FAILED
198.153.192.50 FAILED
198.153.194.50 FAILED

I've been having some wireless issues and I am not sure what this is telling me and what I can do about it to fix it. I checked with the Intel web site for network adapters and it appears that I have the latest driver.
Any helpful suggestions?
 

A:Network Adapters, Intel(R) PRO/Wireless 3945ABG Network Connection, DNSSer

howdy and welcome. start > run > sysdm.cpl > hardware tab > device manager > are there any yellow exclamation points, and if so, what are they next to?

thanks,

v
 

https://forums.techguy.org/threads/network-adapters-intel-r-pro-wireless-3945abg-network-connection-dnsser.1142923/
Relevancy 42.57%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz, x86 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1014 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 384 Mb
Hard Drives: C: Total - 57231 MB, Free - 41659 MB; D: Total - 57231 MB, Free - 14579 MB;
Motherboard: Acer, Inc., Nestos , Not Applicable, LXAJL0X031734074722500
Antivirus: None

Hi. I have a problem with my wireless connection. The tab under network connections does NOT show wireless connection. This happened after I reinstalled winxp. I installed the wireless driver but it did not work. I can only connect to the internet using the wired connection. What should I do?
 

Relevancy 42.57%

To establish a NETWORK FOLDER CONNECTION [add network place] with a hosting account I have in Registar godaddy.com, what to do in vista 32bit ? Is the same and in 64bit, isn't it ?

I want to copy a hosting account's data to my HDD ...

By registering VISTA I get FREE email support from Microsoft ? This also applies in Networking using ADSL Modems to get WLAN , LAN or broadband connections using vista ?

http://www.vistax64.com/network-sharing/223193-establish-network-folder-connection-add-network-place-hosting-account-i.html
Relevancy 42.57%

IGNORE IGNORE.... fixed it thanks anyway
Hi there,
I am having trouble connecting to the internet from my laptop via a D-Link wireless ADSL router.

This is a new problem on a laptop that has been used on this wireless network many times - very strange?

When i click "repair" it seems to hang at the point of acquiring my IP address.
Any ideas?
Thanks
 

A:Solved: Wireless network connection can not acquire network address?

Through the web browser on my desktop i changed some settings on the router i.e. the WPA, and it seemed to work? Magic
 

https://forums.techguy.org/threads/solved-wireless-network-connection-can-not-acquire-network-address.620247/
Relevancy 42.57%

Hi So recently I have removed a nasty zeroaccess rootkit virus es from my laptop My Windows Firewall Defender and Updates would not work still won't my browser kept redirecting to unrelated websites and I was just overall having a TON of irritating issues I installed MalwareBytes and Zone Alarm in addition to my Microsoft Security Essentials and restarted my computer once - everything seemed fine I went to delete a few programs from my computer via the control panel just unneeded things like Canon software I don't even use anymore My computer told me I needed to restart so I did and when connection wireless driver adapter network Problems with and network it turned back on I suddenly had no more Internet access It registers that my Internet providers are being picked up on as in it says Silver Moose is emitting a signal yet I have quot limited access Problems with wireless network adapter and network connection driver quot and all other devices using the network in my home are working just fine I tried troubleshooting and it says that there Problems with wireless network adapter and network connection driver are problems with the wireless Problems with wireless network adapter and network connection driver network adapter and the driver for wireless network connection adapter I've read that removing a access will render someone Internet-less but some people have overcome this However every thread I've already taken a look at don't exactly fit with my problems computer model so I wanted to stay on the safe side and get help fitted exactly to me I have Windows bit a Gateway model NV I don't know if my processor Intel R Core details are needed If so I'll gladly provide them I ran ipconfig all and was about to transfer a copy of it from my messed up computer to this one via a flash drive but suddenly I've found that my computer doesn't recognize a flash drive at all anymore So it's very very messed up indeed I would REALLY like to know what I can do to try and make this situation better or if a system restore is the best option I don't know how to use system restore or what it all does so if you do recommend that can you please offer and explanation of the options it'll give me Will it give a time period I want to backtrack to I feel really helpless here so thanks a ton for any and all help

A:Problems with wireless network adapter and network connection driver

First with this remove Zone alarm, while it use to be a great product, it cause more issues than it's worth these days.
Next, Start menu-> All Programs -> Accessories -> Right click on command prompt and run as Administrator.

Type in netsh winsock reset and reboot, see if the combination of these will help.

Otherwise, system restore is very simple to use and will only affect programs installed, not your personal files. If this doesn't solve the issue pick a time before the rootkit, a couple weeks if possible, and just restore it. You can scroll through all the date to make note of any changes that will be made. Make sure to re-install your AV and Malwarebytes afterwards to keep you protected.

Also, I do not work for Malwarebytes, but $29 for a lifetime license and an active protection module is absolutely worth it.

http://www.sevenforums.com/network-sharing/252548-problems-wireless-network-adapter-network-connection-driver.html
Relevancy 42.57%

Hi Operating system is Windows Enterprise Edition SP and Office Professional is installed nbsp User clicks one the file opens fine Change one character or a bunch then click SAVE nbsp We get quot There has been a network or file the error. has been file may network a lost be permission connection or network there permission error The network connection may be lost quot If I attempt to save it as a new filename the new filename is written in the shared folder but has a size there has been a network or file permission error. the network connection may be lost of K and the Save As window pops up again nbsp Any attempt to save as ANOTHER name produces the same results K size file written Save As window pops up I found a document from MS that says to save to your desktop or map a new drive but this was working just fine a short time ago This issue happens for only one machine If the same user logins to the different machine and it works Who ever login to the laptop get the same error nbsp Below did not help as nbsp it was for Office and Windows XP https support microsoft com en-us kb https support microsoft com en-us kb https support microsoft com en-us kb What has to be done for this Regards Boopathi

https://social.technet.microsoft.com/Forums/en-US/4eb5d0af-32bb-4640-9691-b90a6406d24c/there-has-been-a-network-or-file-permission-error-the-network-connection-may-be-lost?forum=w7itpronetworking
Relevancy 42.57%

Hi All Please can anyone help I have done something and I don t know what I have just bought a new a IP Connection' Solved: does Help have Network not 'wireless a valid adapter network computer a compaq running windows AMD athlon tm IIx processor I had no problems connecting it to the internet it has Solved: Help network adapter 'wireless Network Connection' does not have a valid IP a a wired ethernet cable which plugged to my Thompson router and worked straight away I also have a Toshiba satellite L - laptop running Vista with wireless internet connection At this stage I was getting internet on my new PC and wireless internet on the laptop The problem came when I tried to set up a home network I have done it previously on the old pc running Windows XP with no problems however I am not sure what I have done but I can get internet on the PC but on the laptop it is connecting to the wireless network but not the internet In the network and sharing centre it shows the laptop connected to an Unidentified network but then there is a cross through the line connecting it to the internet In Network and Internet Network connections I double clicked on Wireless Network Connection and then on diagnose I got a box with the heading - The network adapter quot Wireless Network Connection quot does not have a valid IP Configeration I am a bit bewildered what to do and thought it better to seek help rather than fumble around in the dark Hope someone can help Thanks nbsp

A:Solved: Help network adapter 'wireless Network Connection' does not have a valid IP a

https://forums.techguy.org/threads/solved-help-network-adapter-wireless-network-connection-does-not-have-a-valid-ip-a.1016800/
Relevancy 42.57%

PRODUCT: HP Chromebook 11 G4S/N: 5CD5515QDCGoogle Chrome OS Version 50.0.2661.103Platform 7978.74.0Firmware Google_Kip.5216.227.25 This device is frustrating my spouse to no end.  It keeps dropping our home wifi network connection.  I have to shutdown power, wait, and power back on and it refreshes.  This is annoying. I am seriously considering returning this device.  The whole point of this purchase was stability and ease of browsing and light internet use.  Frustration is not part of the purchase.

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Network-Connection-Error-Dropped-Home-WiFi-Network-only-on/td-p/5638654