Windows Support Forum

A series of problems.

Q: A series of problems.

So where do I begin It all started a few days ago when I booted up my problems. A series of computer like any other day and about minutes later I suddenly get a message within my tool bar A series of problems. area that says something along the lines of quot system quot quot quot quot quot exe is corrupt quot It said to run the quot dskchk quot application I sent in the error report to Microsoft where it then sent me a link to the the help page It said to open A series of problems. up the command prompt and enter I believe quot dskchk quot then press enter After that it said to enter another series of commands which I can t quite remember unfortunatley After that my computer restarted in order to diagnose the problem I believe After all that happened my computer restarted but then suddenly gave me the quot disk boot error please insert system disk quot problem Like an idiot I sorta jumped the gun and I think I installed another copy of A series of problems. Windows XP on the hard drive So now when I boot up my computer there are two versions of Windows XP to choose from The first one works and is a bare bones version with none of my precious files on it The second one is what I believe has all my files and everything that I would like to get back However it will not let me into that copy of Windows XP What the hell did I do and is there any way to save my files nbsp

Relevancy 100%
Preferred Solution: A series of problems.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 45.58%

Hi I'm not entirely sure what the root of the problem is here so excuse me if I post this in the wrong section I recently built myself a rig with the help of pcmech com guys Specs are windows home premium -bit intel i - cpu diamond Asus p p d mobo corsair w psu x gb corsair ddr ram intel gb ssd WD black gb hdd The series of problems is explained in detail in this thread problems start at post Cliff's notes on the bugs problems that lead me to where I am now - wasn't sure when to switch as suggested my config from sata to ahci and did so in the bios during the first reboot of the windows install From what I was told I should have done it before the install of the OS - after installing the OS the PC wouldn't get past the 'loading windows' screen until problems rig with of new Series I detached the secondary drive and formatted it after a proper boot-up - installed several programs firefox games etc - pc crashed during assassin's creed showing a BSoD error that was too quick for me to read take a photo Series of problems with new rig of On reboot it would give me the option Series of problems with new rig of starting windows normally would only crash reboot or repairing windows which would give me this BSoD Uploaded with ImageShack us - for whatever reason one time the system repair seemed to work giving me this error report on boot-up Quote Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode b BCP BCP BCP BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Taylor AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink link amp clcid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt - I was then told it could be a memory module problem and to test them with memtest For a good reboots after that I tried running memtest from a CD at boot and it would run the first 'test bar' up to in a matter of seconds then crash and reboot again If I would try to run my PC normally it would seem to boot up fine get past the welcome screen then would simply show a black screen with my mouse cursor which was moveable Opening task manager didn't work clicking didn't work etc - I tried putting the ram in different combos of ram slots just to see if it would change anything it wouldn't load properly after a bunch of tries until I got it into what I think was the same config I originally had - Now the PC often boots to a screen saying I should repair windows start it normally and starting normally never works I repaired was brought to my desktop which gave me errors about improper shut-downs etc and my ATI driver and Catalyst Control Centre were crashing constantly so I had to reinstall them Everything seemed fine last night but this morning I got another BSoD crash that was too quick to see and had to repair again As you can probably tell I'm a pretty big noob just trying to provide as much information as possible Anything else needed just let me know Any and all help very much appreciated really want to get my rig on it's feet again Thanks for reading

A:Series of problems with new rig

Hi and welcome to TSF 0x1a error code is related to memory management which could indicate a ram problem,the next 0x6b Bug Check 0x6B: PROCESS1_INITIALIZATION_FAILED
The PROCESS1_INITIALIZATION_FAILED bug check has a value of 0x0000006B. This bug check indicates that the initialization of the Microsoft Windows operating system failed.

The following parameters appear on the blue screen.

Parameter Description
1 The NT status code that caused the failure
2 Reserved
3 Reserved
4 Reserved

Any part of the disk subsystem can cause the PROCESS1_INITIALIZATION_FAILED bug check, including bad disks, bad or incorrect cables, mixing different ATA-type devices on the same chain, or drives that are not available becuase of hardware regeneration.

This bug check can also be caused by a missing file from the boot partition or by a driver file that a user accidentally disabled in the Drivers tab.
If you can get to your desktop please try to follow the instructions here and attach to your next post
Relevancy 45.58%

This is my first laptop and I'm having trouble. Okay, first off i got my laptop connected to my router and it worked fine for about 2 months. Then, when i take it over my mom's house and try to use her router to connect to the Internet, but it doesn't work. So, i come back home thinking i can get back on the Internet, but i can't.

Please help me.

Things gone wrong:
1. wireless connection wizard says i can't create a wireless connection
2. when i click view all available wireless networks it says none are available in range when i know there are
3. in the network setup wizard it says my wireless connection hardware is not connected
4. message will pop up saying 1 or more wireless networks detected and the same thing happens in 2
Help would be greatly appreciated

Relevancy 45.58%

Hey, kinda serial problem, basically every program on my computer is vulnerable, well has had the error message where it says an error was caused in --.dll. After running a program called "Dr.Watson" I got the following information on one of the errors when one popped up.

OLEAUT32.DLL attempted to read from memory that does not exist. It may be using an uninitialized variable, or it may be attempting to access memory after having freed it.

Adobe Type Manager has altered Windows system files.

Module Name: ATMSYS.DRV
Description: Adobe Type Manager
Version: R v4.00-32S058G06NN
Product: Adobe Type Manager
Manufacturer: Adobe Systems Incorporated

Any help be a big help, thanks.

Relevancy 45.58%

I purchased a new problems A series of Dell in December that had Windows Home Premium Version already installed Also installed was Norton anti-virus All went well until the Norton free day ended and I downloaded a trial version Norton which I believe was version I began to notice a slow down in internet response This was followed by simply having the internet stop working with the error message indicating this When I would hit a search from google I would often be taken to a totally different site not related to the original request Finally at times when I hit the icon for Explorer nothing A series of problems happens and I need to reboot the computer to get this to work I contacted Norton and took all Norton products off the computer using their removal tool and installed PC Tools Spyware Doctor with Anti virus as I had a remaining computer on the initial subscription I maintain with serveral other computers in the house Since removing Norton there has been some improvement but all problems continue I sent PC tools yesterday a scan of my computer to have them search for malaware No response back as of this writing I am open to any ideas and could not find anything totally on point searching the various threads Thanks

A:A series of problems

Hi and welcome to TSF have you cleaned out internet explorer,use the tools button on the upper right handside then internet options and delete the browsing history,also run the clean up tool in system tools and defrag let us know how it goes
Relevancy 45.15%

Hi there,

My Function Key seems to be on all the time. I have had some problems with it in the past,
but I could easily fix it by going to System setting > Keyboard > turn the standard F1-F12 mode back on.
Only the last few weeks, that solution doesn't work anymore. I recently updated to Windows 10 and I was hoping that the update would fix the problem, but it didn't. I tried all the other options like pressing the Fn key for 10seconds and stuff like that, but all my efforts were in vain.
So are there other solutions to this problem? Did you experience the same and how did you fix it?

I really appreciate any help you can provide,

English is not my mother tongue; please excuse any errors on my part.
Relevancy 45.15%

I have and always had Vista Home Premium bit My computer is - years-old Here is my problem Just today I opened my computer from sleep and recieved a of problems [SOLVED] Series blue screen with the error BAD POOL CALLER STOP x C x x B x E x CD The event in the log was Event ID Source Kernel-Power The last sleep transition was unsuccessful This error could be caused if the system stopped responding failed or lost power during the sleep transition I then noticed that this event had occurred numerous times since September only without the Blue Screen and I never noticed it before More interestingly in the [SOLVED] Series of problems even viewer I also noticed that an error occured in September trying to uninstall Lavasoft Ad-Aware Funny thing is that I never installed Ad-Aware I have Avira so could it be a virus of some sort I couldn't find any sign of Lavasoft on my computer which leads me to think that maybe the error occured in another computer connected to my network if that's even possible I heard the BAD POOL can be caused by hardware and bad software maybe Ad-Aware so I did a disk cleaning with OneCare and ran an antispyware Free SuperAntiSpyware and antivirus Free Avira scan with no observable results As of this Blue Screen my internet has been extraordinarily slow sometimes failing to even open up webpages I should mention that I have neverhad a Blue Screen before and that I don't believe I've had a virus before I would not be so worried if my internet were not so slow all of a sudden Please help I know nearly nothing about computers Here's the mini dump

A:[SOLVED] Series of problems

I should also mention that Avira did manage to prevent a FakeAlert virus from enterring the compouter. I have no idea how relevant this is.
Relevancy 45.15%

I have an Aspire V V - T- Q that I got about - months ago I am struggling with a series of problems already so instead of searching the internet I'd figure why not ask the Acer community themselves P S I am running Windows preinstalled I am not a complete pro at computers but I do know a lot about them nbsp First Problem The display brightness and contrast keeps flickering Whenever I use my laptop the backlight on my laptop starts to flicker It flickers as if nbsp the display loses contrast as it gets brighter then flickers back My Series Problems of Aspire's to normal Once in a while the whole screen inverts for seconds to a minute then goes back to flickering The flickering stops when I press hard on the bottom of the display Someone help nbsp Second Problem I did a clean install of the system to remove all the bloatware Each time My Aspire's Series of Problems I do the laptop starts to randomly freeze It freezes as if the whole explorer just crashed For example the taskbar gets stuck then the app I'm using then the rest of the system I get a BSOD that says DRIVER IQRL NOT LESS OR EQUAL once in a while Uninstalling MS Office results in a whole system freeze Someone help nbsp Third Problem Does anyone know where My Aspire's Series of Problems to get replacement keyboard keys
Relevancy 45.15%

First of all I'm not sure if this is a software or hardware related issue so please bear with me if I'm posting in the wrong section on this one About a week ago I got hit by a pretty bad virus AntiVirus that I couldn't get rid of and was causing a lot of other issues To fix the problem I decided to wipe my harddrive and start over I saved what files I need onto an external and did a full wipe Upon re-installing Windows and running updates my computer is running extremely slow and lags terribly I've updated what drivers I can and have checked my registry a few times problems [SOLVED] A series of to remove unwanted programs from the background When I first built [SOLVED] A series of problems this PC it would load Windows in under [SOLVED] A series of problems seconds Now with just Windows installed no games no background programs nothing it is taking up to or minutes I've tried to install Adobe Flash Player with no success I get an error message that I don't have enough disk space and need to free up KB of room and to try again I have GB of free space on my primary drive still Also when scrolling a screen instead of a smooth action it lurches and parts of the display freeze I'm completely stumped I've called all of my friends that are computer savvy techs and they have provided no help Any one

A:[SOLVED] A series of problems

It sounds like you are missing some drivers. Check in your device manager for any devices that may be installed improperly (start menu > run > devmgmt.msc). You will be looking for devices with a red 'X' or a yellow '!'

You could potentially already have another virus infection also. An non updated, unprotected PC connected to the internet will be infected in less than 30 minutes even if you don't surf the internet.
Relevancy 45.15%

I ve tried to connect my SharedDocs and tried to connect to other computers on my network in the past few days without success --that s why I m here of course Two days ago I noticed to not be able to delete a folder with pictures from SharedDocs under MY COMPUTER but was able to do so by accessing it s options sharing it and granting all rights to other users Next thing I could not rename it from quot SharedDocs of problems series Documents quot to quot SharedDocs quot under its SHARING tab Instead when I d try to SharedDocs series of problems type something the letter S would uncheck or check afterwards the option to quot Share this folder in the network quot Completely nuts even if I had highlighted the word quot Documents quot it would keep thinking I was using keyboard shortcuts Now I don t have a clue of what is going on these are just the sympthoms I hope someone is capable of helping me out soon before I take a sledge-hammer and fix any future problem nbsp

A:SharedDocs series of problems

Proton151 said:

Next thing, I could not rename it from "Documents" to "SharedDocs" under its SHARING tab... Instead, when I'd try to type something, the letter S would uncheck (or check afterwards) the option to "Share this folder in the network". Completely nuts, even if I had highlighted the word "Documents", it would keep thinking I was using keyboard shortcuts.Click to expand...

keyboard shortcuts implies the ALT key is down. Can you type normally into
other program windows, eg: Notepad?

Renaming Documents might not work due to any open window on that directory or
any active program running from that or any subdirectory. I've used SharedDocs as a
Share Name before, but that does not change the real directory of course.

To allow add/delete/modify shared files, did you check enable 'allow others to modify documents'?
Relevancy 45.15%

Hello and thank you for reading my thread Ever since my new build I ve had problems with windows except that only I have those problems which leads me to suspect that my SSD is faulty I want to find fix the problems mentioned below and also find out if the ssd is indeed the culprit - running speedfan s hd analysis tool S M A R T tells me the drive is absolutely fine Anyway about the problem s at hand After coming back from a holiday my machine wouldn t boot - it was printing some xc -- error to do with i o on usb devices - after unplugging everything it kept showing up I used the Windows installation disk to repair it Well I can get into windows but once there the explorer crashes and restarts a few times and I suspect of problems Series SSD - get - of these The popup is identical every time Windows repair didn t really fix the error it just postponed it so I can get to the desktop The other problem - which I m certain is related - I have a Net framework update which keeps failing to install I suspect at the creating restore point part Any Series of problems - SSD suspect help is greatly appreciated nbsp

Relevancy 45.15%

I installed IE and it did not work on my computer I reinstalled IE and uninstalled IE Then I started getting an error on startup that says GFxUI has stopped working and I and am of series problems. getting errors a Windows is checking for a solution to the problem I have not been able to find a fix for this problem that actually fixes it When it comes up and says windows is checking for a solution when I shut down and restart computer I get the same error I am also encountering a lot of Page cannot be displayed errors One minute I can open a site or page the next I can't I cannot run I am getting a series of errors and problems. any troubleshooters When I attempt to run one I get an error that says the troubleshooter encountered a problem and shutdown Any method I use to research an error or attempt to fix an error results in something shutting down or stopping running I have random types of error boxes that come up that I have never even heard of and unfortunately I have not logged all of them and they do not come up continually so I can't tell you exactly I am getting a series of errors and problems. everything that is going on I do know that is not the best thing when having problems I believe my problems actually began after I downloaded a form from Microsoft Office online and had problems after doing so I have ran scanners and did remove some tracking information but nothing has surfaced indicating any kind of virus or malware that I have seen I am just freaked out by not being able to run troubleshooters and would like to know if someone can assist me in getting my computer running properly again Yesterday I downloaded Tweaking com Windows Repair All-in-one and Super AntiSpyware and have ran both of these programs to try to diagnose and fix my problems No such luck I was wondering if there are any other Windows fix programs that I might try I have also done the built in Windows start up diagnostics but nothing has jumped out at me as being wrong Was wondering if I will have to uninstall or reinstall Windows to get this fixed The Windows repair all in one did not correct the problems I am fairly limited on my computer abilities but have a minimal understanding of computers and can follow instructions for the most part with little problems I would appreciate any all help you can do for me Thanks Carla I am running Windows Home Premium Internet Explorer

A:I am getting a series of errors and problems.

Hello ybliku2 -
There are several options offered by Microsoft, as it is one of their errors -
If you follow the solution provided you should not lose any personal files or functionality. As a precaution you should always back up personal files/data before attempting to troubleshoot follow the steps in the link below to back up data:
1. Open Control Panel > Click 'Uninstall a Program' (Programs and Features)
2. Look for Microsoft .Net Framework in the list and Uninstall them all (restarting the computer each time it tells you to)
3. Once they are all gone, open the Uninstall a Program (Programs and Features) again and click Turn Windows features on or off, on the bar on the left
4. You get another window on and you need to uncheck Microsoft .Net Framework 3.5.1 from the list and click OK
5. Proceed with it complete uninstall and restart the computer (when it tells you to)
6. Open the 'Uninstall a Program' (Programs and Features) again and now look for Microsoft Visual C++ Redistributable and uninstall all these as well.
7. Restart the computer and open the Uninstall a Program (Programs and Features) again and click Turn Windows features on or off on the bar on the left and place a check on Microsoft .Net Framework 3.5.1 (it would be a blue square and not a check) and install it again
8. Finally, download & install the Microsoft Visual C++ 2008 SP1 Redistributable Package from Microsoft's website
You won't see that error again, provided you have a proper security package (antivirus & firewall) installed.
Thank You -
Relevancy 45.15%

Hi guys Series associated or with of PSU Mobo? problems I m hoping you can help me resolve some problems I ve been having with my computer I ve owned the computer for about a year and a half and it has recently started acting up on me Here are the specs Series of problems associated with PSU or Mobo? CPU Intel Core Duo E Conroe GHz Motherboard EVGA -CK-NF -A LGA NVIDIA nForce i Memory x OCZ Gold GB -Pin DDR SDRAM DDR Videocard EVGA -P -N -AR GeForce GTS MB Harddisks x Western Digital Caviar SE WD JS GB RPM SATA on striped RAID OS Win XP Professional Edition About days ago I went to use it and noticed that the system had frozen up neither keyboard commands or mouse movement would register so I restarted and everything worked fine The next day it froze while displaying a windows error message balloon out of the taskbar saying something along the lines of quot Cannot read from drive C quot which is a striped raid array Today the computer shut off on its own Following attempts to turn it on resulted in it running for minutes before shutting off then less than minute before shutting off and finally less than a few seconds before shutting off I tried unhooking things until I got to the mobo CPU and a single stick of RAM Next I replaced my off brand W PSU with a brand new Antec W to see if that would help After hooking up just the CPU mobo and RAM I turned on the power and things seemed to work fine so I progressively added my peripherals turning it off after about seconds each time to hook up something else Series of problems associated with PSU or Mobo? Finally with everything hooked up I turned on the computer and it lasted about minutes before going into that series of progressively shorter times it would stay on It definitely doesn t stay on long enough to get into the BIOS and check anything in there That s where I m at now and I thought I might look for some advice A couple of questions I have Do these PSUs have some sort of safety mechanism to prevent some sort of short in the mobo or other components from affecting the PSU itself I wonder this because I d hope to use this PSU to test out the other components one by one If there is a short in say the mobo am I endangering the other components by hooking them up and powering up What would be the most likely culprit for these problems Would the Series of problems associated with PSU or Mobo? best option at this point be to continue tampering with it myself or to hand it off to a computer repair shop Any advice you guys might have would be great Thanks -Anand P S I do want to mention that while time isn t a huge issue for me in getting this working I would like to have this computer up and running without putting too much money into getting it fixed nbsp

A:Series of problems associated with PSU or Mobo?

any type of short is potentially dangerous to all/any parts hooked up.
The only type of solution in your case is to start small- and add components one by one, ensuring first that you have a good PSU (tested with tools) and also checking that there is no short.

Also test your ram with memtest 86+ booted from a floppy or CD
Relevancy 45.15%

But First, I installed a new Motherboard to fix a problem with my Video Card (which did not fix it, btw.)

Now, I'm having issues with the Motherboard now. The First problem I really need to fix is my Ethernet ports. They installed alright but they won't reconnize the Router or even that there's a Plug in the jack. (Yes, the Routers working fine. This computer is currently on it.)

CAn anyone help me get my Ethernet jacks working?

PS. The new MB is a M2N-SLI Deluxe
Relevancy 44.72%

Hi ive got a Sony vaio f series Intel i laptop running windows bit home premium Root hub (i3,i5,i7) usb Intel problems i series Ive encountered a lot of problems with usb devices Microsoft and Intel are aware of the problems but they still aren t fixed First I have had alot of issues with rane scratch live SL which is a usb device ive managed to get that working now mainly down to service pack Im still finding though that i cant seem to use two usb devices at the same time Intel i series (i3,i5,i7) usb Root hub problems All i want to be able to do is use a usb mouse and or scratch live or a external sound card Whichever usb device i plug in st is the one that works Intel i series (i3,i5,i7) usb Root hub problems but i can t use both at the same time which is so frustrating Has anyone else had this problem and can anyone help me Heres some examples of what the usb problem is if i havet explained very well Connectivity of USB devices on non-root hubs Focusrite Answerbase Quad-Core Issues Intel Core i-series Serato com

A:Intel i series (i3,i5,i7) usb Root hub problems

It's a common problem for Vaio's... Power supply is not able to "feed" all the USB ports and they become locked by the system. Try the following:

- Shut it down completely.
- Unplug everything.
- Remove the battery for 10-15 seconds.
- Plug everything back
- Start it!

I'm sure it will work ;-)
Relevancy 44.72%

So my problems first started with the my Siemens laptop staying at the windows logo loading page, with the scrolling blue bar indicating its loading, so i tried starting up in all types of safe mode and also system restoring to a number of dates but was left with the same problem.
So i did some reading and found that maybe I should reinstall windows XP whilst retaining all other saved files, and so i tried this, all seemed to be going well until it was completely installed and now my laptop wont stop rebooting and i cant stop it as it wont let me access any safe mode option screens. What do you think my problem is and how do you think i should fix it?
Should i just buy a new laptop? its a few years old and has been well used.

Fujitsu Siemens - Amilo L7300
1GB ram
60GB hard drive (could this be corrupted?)

Relevancy 44.72%

It all started when i installed the second card Its a Gigabyte GTX gbram and the one i had in already is a EVGA GTX SuperClocked also gbram They are suppose to be the same I had alot of problems with the monitor not wanting to turn on so after switching the cards around about times it suddendly works The EVGA card is on top windows recognize that i am running SLI Suddendly i get audio problems I hear after SLi Series Nvidia problems running of weird static comming from the speakers i have no idea where that comes from It starts basically a few seconds after i turn on the computer so its before it even enters windows I also get a red flashing light at my RAM for a few secs then Series of problems after running Nvidia SLi a flashing red light at the PCI-E ports and then one further down i dont know what is for The weird static persists even after i pulled the other card out Series of problems after running Nvidia SLi so i am only running Suddendly my computers bios also reset so it showed that the year was and windows could not update because of it Series of problems after running Nvidia SLi What could be causing this I have not hooked up SLi before I have a w powersupply so i know it can handle but but the wires going out of my PSU some are threaded with some fabric and says PCI-E Are those the ones i am supposed to use for the cards I did that and it changed nothing I know this post might seem like i am rambling but im having so many problems with my computer that i dont even know how to explain them I am extremly frustrated and have just reinstalled windows The clock was still but i sorted that out The static persist tho

A:Series of problems after running Nvidia SLi


The clock was still 2002

This would be an indication that your CMOS battery needs to be changed.
Relevancy 44.72%

First of all hello to everyone 8 Wi-Di Series ultrabook 9 Samsung Win Problems here I've been browsing these forums for an answer to Win 8 Wi-Di Problems Samsung Series 9 ultrabook my issue but couldn't find anything in the FAQ about my specific problem I followed the directions in the FAQ as well as those on the Intel site but I am still having issues I ran the Intel system compatibility and driver checker and it says that I have the proper Graphics Diver for my Intel the proper WiFi driver for my Centrino Ultimate N and the new WiDi driver I have a Samsung Series original model and a Belkin Screencast When I open the WiDi software and turn on my Screencast it shows up immediately in the connection menu on my laptop When I connect it goes through the security setup then takes me back to the main WiDi screen After this I try to connect again and it gives me a message something to the effect of quot while connecting to your device your internet connection will be lost It will be restored after the connection is made quot I never had this step involved in the process with windows When I click continue it shows that it is connecting on the laptop and the TV connected by HDMI to the screencast confirms that the two are connected but the WiDi application still shows quot connecting quot and never fully connects I have tried powering both off and restarting the process I have tried to have the laptop forget the screencast and start from scratch and nothing is working I look forward to and appreciate your assistance EDIT I was able to successfully connect to my adapter after disabling the windows firewall The Laptop connects to the adapter very quickly and easily now My new problem is that my laptop acts as though I have no internet connection while I am connected to the adapter Any web page I attempt to load ultimately times out I do not remember this being an issue with windows

A:Win 8 Wi-Di Problems Samsung Series 9 ultrabook

Hello, I've upgraded to Win 8 and cannot get my WiDi to work. I have a Series 9 (NP900C4) and have followed the directions on both the Samsung, Intel and this forum and cannot get my WiDi to work. I have the following drivers:

Intel HD Graphics 4000 =
Intel Chipset =
Audio Driver =
Intel Centrino Advanced N-6235 =
Realtek PCI = 8.2.612.2012
Intel WiDi Software =
Intel WiDi Widget = Not supported

When I start WiDi it just hangs I've uninstalled and reinstalled the WiDi app multiple times with no success....any help appreciated.
Relevancy 44.72%

I'll try to keep this brief since the full version would be way too long but strange things have been going on with my computer lately First some background Computer Hewlett Packard Pavilion Elite HPE- y or years old now a home system Original Operating System Windows Home Premium Upgraded to Windows and then and as of last Fall Windows via the automatically downloaded upgrade It had some trouble upgrading to Windows but eventually what of might them? causing A series problems - be recent succeeded and has been working A series of recent problems - what might be causing them? fine Here is the quick version of the events I can remember from the last couple of A series of recent problems - what might be causing them? weeks To get all-in-one wireless printer scanner to work which had been working before -- a HP B a-m I think I followed HP's suggestion to switch to private network I ended up having to reinstall printer driver A series of recent problems - what might be causing them? but the installation failed as well as it's attempt to roll back the installation On every startup the system tries to complete the installation of the printer but cannot due to missing files Every attempt to install including using HP's special installation process failed the same way Windows Update did not seem to be working Would always fail on the same update whether done automatically or manually Has seemed to work since Tried System Restore but could not get back far enough to get everything working properly again System File Checker sfc reported no problems chkdsk reported no problems chkdsk R reported no problems but I was suspicious of it since it started up saying it was complete and took a very short time to test a TB drive I wanted to backup my files and do a clean install but the system no longer recognized USB external drives or USB memory sticks Device Manager shows USB drive under Other devices and marked with a problem quot The drivers for this device are not installed Code quot Updating the drivers in Device Manager seems to work but the drives are still not recognized by the system Downloaded a Windows Pro iso to attempt a repair and tried to mount it Mounting failed for some obscure reason Burned the iso file to a DVD to try the repair All seemed to be going well until hours later I get a rather unhelpful message saying quot Something happened quot and that Windows could not be installed Maybe because I forgot to turn off anti-virus Just this morning I noticed the Windows key no longer brings up the start menu when I press it nor does left clicking on its icon in the taskbar work Combinations such as Windows-R still work as does right-clicking the icon Summary The computer basically works the programs I run still run I can connect to the internet etc But I can't print or access external storage It seems a hardware problem would bring more catastrophic difficulties so I suspect a software problem but I can't find what needs fixing and the system itself seems to be preventing me from starting clean without losing everything Yes I got lazy with backups I haven't tried everything I've learned on this forum yet like dism online cleanup-image restorehealth and I'm not at that computer right now and can't give you the details on everything that's been happening but finding this forum is the one good thing that has happened from all this Can anybody see a pattern to these things Does it seem to be software Hardware A virus A delayed side-effect from multiple upgrades A progressive disease in an elderly computer I'd be grateful for any suggestions you can make

A:A series of recent problems - what might be causing them?

The brief version I would have read.
Relevancy 44.72%

Hi I m new to this forum least problems series (at me) A of defy for explanations that and I m glad that you are here I m running Windows XP Home Edition My problems actually stem back to around January I tried to run an install program for the FTP program Flash FXP It would not work at all I would click on the exe file and nothing would happen I tried the file on my laptop and it worked fine I figured I had a virus of some type so I upgraded to AVG A series of problems that defy explanations (at least for me) and ran a scan It found some tracking cookies and some virus and I got rid of them However still Flash FXP would not install A few days later suddenly my Windows Commander stopped working When I tried to run it the screen blanks all except the the wall paper and then comes A series of problems that defy explanations (at least for me) back after a few seconds The only way I could run Windows Commander was to use the quot Run As quot function with the protect my computer and data from unauthorized program activity However I can t play music or use Word when I do that So I tried to uninstall Windows Commander and it wouldn t allow me to do that the same thing from above would happen I used regcleaner to uninstall Windows Commander and tried to reinstall it However even when I tried to install it the same thing happened screen would A series of problems that defy explanations (at least for me) blank and comeback after a few seconds So I stopped using Windows Commander I also noticed that REGEDIT did the EXACT same thing A few weeks later my AVG would not allow me to update I did everything the AVG help said to do and nothing worked It tells me that access to the server is forbidden I ended up doing an update through the directory option That worked but it still wont update on its own Yesterday after years of having no problems my Winamp program will not connect to the CDDB I upgraded to the latest version and still nothing I am really confused about this one as Windows media player tells me what s playing no problem as does Nero I have taken down my Windows firewall numerous times and allowed a Winamp exception It s almost as if something is blocking these programs from connecting to the internet but I have no idea how to check if these programs are being blocked Say nothing of the weirdness with Flash FXP Regedit and Windows Commander My AVG tells me that I m not infected and Spybot tells me I m fine too but I don t know how to check anything else I m now worried that other programs will start acting up and not working properly because of these problems Any explanations and help on this would be greatly greatly appreciated Thanks In Advance

A:A series of problems that defy explanations (at least for me)

Have you considered a clean install?

Relevancy 44.72%

Hi all I ve just finished setting up a quot new quot system and I ve been coming across some bugs This is the main one My Audio breaks up when I try to play back files some of the HELP! audio Series problems! playback time You can see my system specks next to my username The question is it the MB the Sound Card the Sound Card Drivers or the Codecs I m using I had a K-Lite codec pack installed and I had some other one installed at some time as well I ve since uninstalled these free codec packs after re-discovering my disc with Cyberlink Power DVD on it I ve Series audio playback problems! HELP! never had problems with the Codecs that this program installs so I think I can eliminate Codecs Especially considering the problem exists even in VLC I do use a software level audio enhance from SRS however I didn t have any problems with it on my last system so I don t think that is the problem That brings it back to my drivers and hardware I ve checked that my drivers are uptodate several times Both through the manufacturers site and MS Update So I m guessing it s got to be hardware based However There isn t just distortion when audio files are played there is also a slowing down of the audio track That would indicate a processing slow down Wouldn t it The CPU goes straight to a bit over when I start playing audio files It s Dual-Core processor so that would tend to indicate a single core enabled process cramming one of the cores with Series audio playback problems! HELP! calculations Oh I don t know Can someone help I would really like to be Series audio playback problems! HELP! able to play my music again nbsp

A:Series audio playback problems! HELP!

I was going to start giving suggestions but the site has totally loads of help, have you tried all their stuff first,Sxi=5,Answer51037=obj(51037):obj(51057)
Relevancy 44.29%

Please help My Computer is having a series of startup power problems It started off that when I put the PC into standby when I wasn t using it the blinking light which signifies standby would stay blinking even after I logged back onto Windows I usually fixed that by turning everything off unplugging resting the transformer powerbar and then plugging back problems having of Computer startup/power a series in amp turning it back on Then early New Years Day I noticed the computer was off and I didnt remember turning it off and the blinking standby light was not on My settings were set so that it was several hours before my PC would shut itself completely Computer having a series of startup/power problems off and it hadnt been that long since I had used it I tried to turn it back on via power button and I was able to log into my admin Windows user account but the whole machine Computer having a series of startup/power problems shut completely off right around the time when the desktop icons started loading I unplugged everything cleaned a bit of dust out of the inside of the tower reset the power bar waited awhile plugged it back in and started again same thing several times I noticed that the back smaller fan was barely going and making no noise--It is usually somehwhat loud on this old computer At first I thought it was overheating which it did about a year ago but I didnt hear the little beeping that normally occurs when that happens I unplugged reset power bar and turned it on again and before the login screen loaded I hit F I think to go into BIOS settings I set a Supervisor password for BIOS settings and restored all other settings in the BIOS screens to default This whole time I am spinning the back fan manually with my finger whenever it seems to start slowing down or getting quiet When I first logged back on to Windows I went in my Admin acct and disabled the network connection I use Comcast broadband connected via ethernet btw right away The fan kept going normally on its own and has since I ran Avast antivirus-found nothing-Then I defragged-I ran Hijack this and got the log below--I didnt fix anything in there yet as I wasnt sure what was what I also turned off the Hibernate function in the Power Settings For now I am able to use the computer and go online as you can see by my posting here I am now using my nd Windows user a Limited Account and am avoiding going online with my Admin account Obviously I got it running again--but I m not sure exactly what it was that I did which fixed it--or how long it will last I use my PC for my small business and having it switch off w o saving anything could be a serious problem for me My question is HOW do I know what was is wrong with it and how do I keep it from just turning off like that again Preferably without spending much money as I have next to none THANKS My Hijack this log Logfile of HijackThis v Scan saved at AM on Platform Windows XP SP WinNT MSIE Internet Explorer v Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C Program Files Common Files Symantec Shared ccProxy exe C Program Files Common Files Symantec Shared ccSetMgr exe C WINDOWS Explorer EXE C Program Files Alwil Software Avast AvastSvc exe C WINDOWS system spoolsv exe C WINDOWS system CTsvcCDA exe C Program Files Creative Shared Files CTDevSrv exe C Program Files Java jre bin jqs exe C Program Files Common Files LightScribe LSSrvc exe c program files mcafee com agent mcdetect exe c PROGRA mcafee com agent mctskshd exe C Program Files Norton Internet Security Norton AntiVirus navapsvc exe C Program Files Common Files New Boundary PrismXL PRISMXL SYS C WINDOWS system svchost exe C Program Files Viewpoint Common ViewpointService exe C Program Files Common Files Symantec Shared ccApp exe C WINDOWS system igfxtray exe C WINDOWS system hkcmd exe C PROGRA mcafee com agent mcagent... Read more

A:Computer having a series of startup/power problems

please clcik report and ask to move to spyware forum they are busy though you will be moved back here if needed
Relevancy 44.29%

I have looked through the web searching for solutions for my horrible graphic card driver for quite a while now. The problems with it is when I start up my PC, my screen will turn black and then function. But it will keep again and again until my computer enters BSOD . Some suggested that you turn up the amount of electricity going to your graphic card, back date it, and much more too. I tried quite a few pf them already but sadly I couldn't do it or it just doesn't work. Currently, my Nvidia's version is I would like a solution that's really simple but at the same time able to solve this problem. Thanks!

A:Nvidia GeForce 210 Series Driver Problems.

I'm running a GT220 in my desktop PC, its a PCIe card using the Nvidia 320.49 drivers in Windows 7 64 bit. No problems that I am aware off.
I got them from Nvidia, Drivers - Download NVIDIA Drivers
Relevancy 44.29%

Windows vista acer aspire core quad processor amd This all started with me hooking up my windows laptop to my vista desktop pc to transfer some files via Cat e cable I was having trouble getting computer series problems, crashes. of Solved: After a this to work so i followed this guide that for the life of me I can t find now said to input certain ip address enable netbios and in the end it worked Afterwords I tried to get everything back to normal unshare folders Solved: After a series of problems, computer crashes. put in my original ip address stuff and switch the netbios things back to default Somewhere Solved: After a series of problems, computer crashes. along the lines i must of did something wrong because i couldn t get access to the internet Messed around trying to get my computer to connect and probably just made it worse So looking around i wondered if i could just quot reset quot my tcp ip and or internet settings to a quot default quot and found a different guide that suggested to type quot netsh int ip reset c resetlog txt quot into the cmd prompt which i did Then I restarted Now when i turn my computer on it starts up normally gets to the desktop and then shortly after crashes The screen blurs then goes black I dunno what exactly is causing this I can run the computer in safe mode though I tried stopping various programs from starting up as i thought it was something it was loading at the startup that was causing the crash but none of the things i stopped solved anything nbsp

Relevancy 44.29%

I have a W Thinkpad supplied by my employer and have had it for less than a year Since day i've been having issues with the docking station and I am finally fed up to the point of reaching out Here are the following issues i have had nbsp on occasion when docking and the laptop is on it will power off hard when redocking and power is on my secondary monitory will have random pixels sparkle white on the screen and then about every minutes the secondary display will shut off for about seconds Only putting the laptop to sleep and back will fix it when docking and regardless if power is off or on one of either the laptops main display or my secondary monitor will not work Sometimes redocking about times will bring it back sometimes not Sometimes restarting the machine will work and sometimes it will not when docked i have a MS wireless keyboard and mouse plugged into the dock on occassion they will loose connection with the computer Unplugging the dongle and plugging it back in will resume operation but it will eventually cut out again Only moving the dongle to a usb port on the laptop itself Station (W Problems Docking Lenovo series) will resolve the issue This is not a good solution as the dongle is not low profile I Lenovo Docking Station Problems (W series) recieved this laptop with windows and have since upgraded to windows These issues were happening on both versions of windows No Lenovo Docking Station Problems (W series) other modifications were made to the machine or its base software nbsp nbsp Please help as i'm frustrated to the point that I'm about to return this machine for a refund nbsp and pick Lenovo Docking Station Problems (W series) up a new laptop from a different company

A:Lenovo Docking Station Problems (W series)

Your employer is going to let you return their supplied laptop for a refund or replacement from another brand for a unit that I am guessing you have used for more than half a year? o.0 On topic, Do you have any issues with the laptop itself when it is undocked?  From the sounds of it all problems appear to be docking related, so assuming the dock connector/port is free of all detrius that might cause issues, would suggest using the warranty to replace the dock as that certainly sounds to be the focal point of all your issues.
Relevancy 44.29%

Hello In the past I've been able to fix most malware problems by reading over advice given here to others in this forum but this time I'm really stumped redirecting with series other google zfsearch of problems along It began w my google searches being redirected by a trojan called zfsearch com while slowing down the internet opening up empty popup browsers not allowing connections etc etc In an attempt zfsearch redirecting google along with series of other problems to fix the problem I rebooted into safe mode after d ling Spybot and Malwarebytes but for some odd reason after the double click the hourglass pops up and programs never zfsearch redirecting google along with series of other problems open I've tried checking other sites for info and have tried running Norman Malware Cleaner and SUPERAntiSpyware but both have failed to open as well This trojan also seem to say that domain names could not be found when I click on a perfectly fine link Here is a hijackthis log I've saved - any help would be appreciated I've resorted to working on my old laptop Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Boot mode Safe modeRunning processes C WINDOWS System smss exeC WINDOWS system winlogon exeC WINDOWS system services exeC WINDOWS system lsass exeC WINDOWS system svchost exeC Program Files Lavasoft Ad-Aware aawservice exeC WINDOWS system svchost exeC WINDOWS Explorer EXEC Program Files Malwarebytes' Anti-Malware mbam exeC Program Files Trend Micro HijackThis HijackThis exeR - HKCU Software Microsoft Internet Explorer Main Search Bar http search live com sphome aspxR - HKCU Software Microsoft Internet Explorer Main Search Page http search live comR - HKCU Software Microsoft Internet Explorer Main Start Page about blankR - HKLM Software Microsoft Internet Explorer Main Default Page URL http www yahoo comR - HKLM Software Microsoft Internet Explorer Search SearchAssistant http search live com sphome aspxR - HKCU zfsearch redirecting google along with series of other problems Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride localO - BHO no name - D -C F - efb- B - ECA - no file O - BHO no name - a c e- dc - d -b - b baee - C WINDOWS system nasipato dllO - BHO no name - d cb -c cd- c f-bfdc- b afbdc c - C WINDOWS system urqOIxYo dllO - BHO no name - B B- - C B-A AE- EE CB F - C WINDOWS system rqRKCrQG dllO - BHO no name - f cc - b- bdb-b b - c d - no file O - Toolbar amp Google Toolbar - C B - - d - B - A CD F - C Program Files Google Google Toolbar GoogleToolbar dllO - HKLM Run SunJavaUpdateSched quot C Program Files Java jre bin jusched exe quot O - HKLM Run LVCOMSX C WINDOWS System LVCOMSX EXEO - HKLM Run LogitechVideoRepair C Program Files Logitech Video ISStart exeO - HKLM Run IMJPMIG quot C WINDOWS IME imjp IMJPMIG EXE quot Spoil RemAdvDef Migration O - HKLM Run MSPY C WINDOWS System IME PINTLGNT ImScInst exe SYNCO - HKLM Run PHIME ASync C WINDOWS System IME TINTLGNT TINTSETP EXE SYNCO - HKLM Run PHIME A C WINDOWS System IME TINTLGNT TINTSETP EXE IMENameO - HKLM Run HP Software Update C Program Files HP HP Software Update HPWuSchd exeO - HKLM Run RemoteControl quot C Program Files CyberLink PowerDVD PDVDServ exe quot O - HKLM Run ATIPTA C Program Files ATI Technologies ATI Control Panel atiptaxx exeO - HKLM Run NeroFilterCheck C WINDOWS system NeroCheck exeO - HKLM Run CloneCDTray quot C Program Files SlySoft CloneCD CloneCDTray exe quot sO - HKLM Run QuickTime Task quot C Program Files QuickTime qttask exe quot -atboottimeO - HKLM Run iTunesHelper quot C Program Files iTunes iTunesHelper exe quot O - HKLM Run ISUSPM quot C Program Files Common Files InstallShield UpdateService ISUSPM exe quot -schedulerO - HKLM Run Adobe Photo Downloader quot C Program Files Adobe Adobe Photoshop Lightroom apdproxy exe quot O - HKLM Run C WINDOWS system kdfsl exe C WINDOWS system kdfsl exeO - HKLM Run c f d rundll exe quot C WINDOWS system bvmbyxmm dll quot... Read more

A:zfsearch redirecting google along with series of other problems

Anybody have any ideas? I'm at the point of contemplating reformatting
Relevancy 44.29%

Hi out there!

Just wanted to inform you about an enoying but reproduceable BUG:

Toshiba Satellite Pro R50-B Series:

You have to disable the Intel-Management-Interface in Device-Manager otherwise the Notebook won't shutdown completely / Standbymode wont work.

Issue (Bios V1.4 - Intel ME 11.00.1166):

Work longer than 30min. Then try to shut-down. Screen goes blank - but LEDs on the front stay on, fan stays on until battery is completely empty. Or try to go to standby-mode. Same as shutdown.

Just disable Intel ME in Windows Device-Manager an you fine.

Waiting for any news from Toshiba - i m a reseller, so the same problem exists on >10 notebooks here.

Regards, Bernhard

A:Satellite Pro R50-B Series Windows 10 Shutdown Problems

Hi, I have the exact same problem with my Satellite Pro R50 and Windows 10.
Just installed updated Win10 drivers from Toshiba, but no solution.
Please help!
Regards, Oliver

Relevancy 44.29%

Playing League of Legends or Diablo 3 on Windows 8 i started to have this kind of bugs:

I tryed to update using the Windows Update driver : "Advanced Micro Devices, Inc. driver update for ATI Mobility Radeon HD 4500 Series (Engineering Sample - WDDM v1.1)"

I tried update the latest driver on the AMD website while using compatible mode with Windows 7.

I tried using the AMD Driver Downloader but couldn't accept W8 as an OS.

So the problem still maintains... since AMD is not supporting 4k series and lower is there anything i can do before changing back to W7 ?

A:ATI Mobility Radeon HD 4500 Series problems in W8

I have exactly the same problem with diablo 3. Has anyone found a solution yet?
Relevancy 44.29%

I have a year old Dell laptop that I hard drive I problems of going a Is unrelated my series have am bad,or bought refurbished It has Is my hard drive going bad,or am I have a series of unrelated problems Windows Home Premium Is my hard drive going bad,or am I have a series of unrelated problems -bit Intel i GHZ GB hard drive less than full The laptop screen has always occasionally gone gray instead of loading - the computer continues to boot up properly just no display It does this on initial start or sometimes more often when coming out of screen saver If I close the laptop lid and reopen it in a minute it comes back to normal It has started do it more and more now that I am having other issues It would help to know if these other issues are related or unrelated - I lost the ability to make new folders and after searching around the web a lot I found the solution and that is finally back Accessories lost the CMD and I figured out how to put that back - It has never just automatically updated Windows I get Error Code EE but have run the troubleshooter to no avail I can update Windows I have to manually do it from the option at the bottom of the update screen that says Check Online For Updates From Microsoft Update I finally found out somewhere that I could delete a certain file in my registry and figured that out Then Microsoft told me I didn't have an authentic Windows but then certified that I did - Recently the program list in the Control Panel Uninstall program lost about half of the programs listed The programs were still on my computer but they were no longer on the list I have spent a fair amount of time uninstalling and reinstalling the programs I really wanted to have back I'm afraid to do that with a couple of programs that came pre-loaded on the computer since I don't have a way to reinstall them PowerDVD and RoxioBurn - Microsoft Security Essentials won't run a full scan but it will run a short scan I've looked that up and in finding what someone wrote on that I tried doing chkdsk f r and it only froze up on the step where it was checking files I researched that and it appears that my hard drive may be going bad I am in the process of backing up my computer to one of those online backups Should I take MSE off and reinstall In running chkdsk it would hang up at about the file area of I think and would most times say it fixed some files Should I keep trying to run chkdsk The first time it froze there it stayed in that place for hours It allowed me to restart the computer which then wanted to run chkdsk again but after about tries I researched it to find out that my hard drive might be going bad exited chkdsk which thankfully it allowed me to do and am in the process of backing up my drive online days later I'm using BackBlaze which was highly recommended on a website that rated the online backups -Sometimes Adobe Flash crashes spontaneously sometimes I get a message saying that scripts have stopped working and I never know whether to stop them or what - Last but quite possibly the most important of all certainly the most ANNOYING is that my computer slows WAY WAY down and takes minutes to open or close a page or program and can take up to hours to shut down once I coax all the programs to close Does all of this suggest that my poor computer is dying a slow death Or are these separate issues that I can try and solve separately If I'm backed up online I can do a whole system reinstall once I get back home at the end of August and get one of my computer friends to help me with it Sorry this was so long but being only a good quot muddler quot basic knowledge back from the DOS days with these things I'm a bit confused and don't know how to sort out nagging minor issues from the major stuff Thanks

A:Is my hard drive going bad,or am I have a series of unrelated problems

Hello and welcome Lucy look I am not a fan of refurbished machines to be brutally honest and I think you might be well advised to run some tests on the drive for starters two you can use are
SeaTools for Windows | Seagate
and a surface test with this Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition. see my pic.

Other things to do are these

download from bleeping computer ? delete any rubbishthese find.

Further on you might even have to do this

MEMTEST one you will need to make a bootable disk set theBIOS to optical (or USB if preferred) boot the machine and let it run for at LEAST 8passes unless the errors come up straight away. Takes fair timeto complete and some leave it running overnight.

Ifthe errors come up quickly then you can stop it and you will have to test eachstick and maybe in each slot to sort the bad one out.

It would be good to see what the temps are too use this
Speccy - Download < from piriform

In all honesty I think you may be up for a reinstall and this is the best way to do that
Clean Reinstall - Factory OEM Windows 7 see pic for versions
Relevancy 44.29%

Basically I think it s Laptop Samsung Ultrabook Series 5 Problems; been happening for a month now My laptop screen glitches - the images distorting and sometimes green text appearing - Laptop Problems; Samsung Ultrabook Series 5 before Laptop Problems; Samsung Ultrabook Series 5 righting itself and crashing The only way I can get the Laptop Problems; Samsung Ultrabook Series 5 laptop to function again is to turn it off via the power button or take the battery out and put it back it again It has also become slow starting up - taking at least five minutes before you can log in and then a further five before you can actually do anything The cursor sometimes gets stuck in the center of the screen - I can access things using the tab screen but the cursor won t move whether I use the laptop touchpad or my USB mouse The fan has also been sporadically speeding up before calming down again - even though I ve been doing the same thing for the past god knows when I ve done a boot-up scan using avast had a look through all of my files and gotten rid of any old files that I don t need on there in an attempt to create some space but I ve got about - gb free so I can t see why that should be a problem Nothing happens before the glitches crashes so I don t think I m causing it by moving it and so on About a month ago the charger port was fixed at a laptop repair shop and then the laptop itself was sent off to SAMSUNG to have the motherboard replaced because I mistakenly wiped the bios since one driver update shut the laptop off in the middle of the bios update so I don t know if something is loose and so on I m planning on selling it in a month or two so it s not that much of a problem but of course I don t want to sell it to someone if its being a pain in the backside I also switched from integrated graphics to a nvidia geforce graphics card that is in the laptop when I bought it so that might be why Basic Info Samsung Ultrabook Series Intel Core i GB Ram TB Hardrive bit Operating System NVIDIA Geforce GT M nbsp

A:Laptop Problems; Samsung Ultrabook Series 5

This sort of problem is tough to troubleshoot over the internet. It could be quite a few things that could cause the symptoms that you're experiencing. With that said, I'd probably start with updating the discrete GPU drivers. Since you did switch from integrated to discrete, this could be the main cause for the graphic glitches which is probably crashing the system.

Moving forward, I think you should download something like CPU-Z to monitor the CPU load and temperatures during the crashes. It could be that your CPU is overheating and could use some attention.
Relevancy 44.29%

I have a set of HP Z Workstations with E - -V Xeon Cpu's SSD boot drives and varying sizes of memory from - GB Mghz DDR ECC We use Windows Enterprise for these machines with Hyper-V enabled We get regular driver failures from the sets of USB controllers on the machines Mainly and issue for the KB amp Mouse that can only be resolved with a full power down not restart and a power up This happens at least once every - days per machine I had gone through the HP support but Chipset fail Family causes USB Series/C200 Series Enhanced Hyper-V Controller driver Intel(R) to Host they have advised this isn't an issue on their side and I had agreed all along I was just hoping to get some traction by notifying them Anyway after a lengthy trouble shooting session we found that once Hyper-V was enabled the fault arose As it was an Intel chip they I asked them They advised that on Windows the drivers are supplied via windows update and that it was not their issue So how can I get this resolved Not through Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail HP or Intel surely through MS Maybe not Disabling Hyper-V is not desired as I the teams with these PC's are developers and require local visualization Also we have templates ready for Hyper-V I don't really want to remove Hyper-V and use Virtual box or VMWare workstation but I am at wits end with the fault and lack Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail of help from the vendors Please help

A:Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail

I have found a work around for this fault with the USB failure - ENSURE YOU POWER  THE MACHINE OFF - DO NOT RESTART.
Its almost like the restart doesn't initialise the device correct, thus causing a failure.
Relevancy 43.86%

I know it s been posted a Needed Price + 7-Series Advice v. in 8-Series: Performance s load of times but I figured I d go ahead and get something straightforward- all the other posts have been in jungle English and haven t included the proviso I m looking for Anyways my situation is that I bought my X GT from Newegg around Christmastime as a present to my ainsel ownself for those not familiar I ve been getting kind of disappointed in it Price v. Performance in 7-Series + 8-Series: Advice Needed recently It underperforms and often crashes on STALKER Shadow of Chernobyl and some more modern games akin to it It also runs hot as Hades I m in the market for a new card I d like to go DX but the late-production DX s series seem to outperform a lot of the more affordable DX offerings series especially at higher resolutions Price v. Performance in 7-Series + 8-Series: Advice Needed due to the -to- bit difference I could splurge and go for an I suppose but it would be a hit to the wallet and I d have to postpone cough quot Aruban Getaway quot So I don t want to pass up on the new line of DX -only Games for Windows Age of Conan Crysis etc that have been hyped to all hell just because I stuck with price and performance instead of currency and novelty I need some help deciding Then again I could always wait until DX becomes the vogue and buy a cheaper but better card then nbsp

A:Price v. Performance in 7-Series + 8-Series: Advice Needed

Keep what you got and see what's comming next. I have a 8600GT as a stopgap until something better comes out. There has been talk of a Nvidia 256bit card to fill the gap between the 8600's and 8800's. I can't fit a 8800 in my case, if I could I would just get the 8800GTS 320mb now. If I were you, wait for the game to upgrade instead of upgrading and waiting for the game. Your X1900GT is no slouch either.
Relevancy 43.86%

All nbsp With the new year we start a fresh discussion for members to share their order and fulfillment experiences nbsp We are retiring the nbsp thread nbsp nbsp nbsp Anyone having an active discussion there can find it here nbsp The - tread nbsp can be found here nbsp nbsp nbsp nbsp Here are some common points of frequent discussion nbsp How to get a system fast nbsp Buy an in-stock standard configuration from Lenovo or a Lenovo Partner in your area Customized systems take longer Avoid Credit Holds - ensure that BOTH your bill to and ship to addresses are listed with your CC bank before ordering Lenovo will not bill your card until order ships - an authorization Tablet Series X - Shipping edi... 2015 Thread series charge hold to check for available X series Tablet Series Shipping Thread - 2015 edi... balance may show up when order is first placed Estimated ship dates are based on default lead time and can vary from what was displayed on website In the US and Canada Lenovo utilizes UPS for new product shipments Orders may ship before the Estimated Ship Date Orders may enter through Alaska and pass through Louisville KY before traveling on to final address Cancellation requests may take up to days to process Requests to change configuration or other aspects of the order may require the order to be rebooked Lenovo does not accept payment via international credit cards except AMEX We hope you enjoy your new ThinkPad system when it arrives
Relevancy 43.86%

P4 Windows XP pro - I have just installed a new ATI catalyst driver for Radeon 9200 series and now I can't adjust the screen resolution, font size etc. This all started after installing a new monitor and my grandson wanted to play his Fifa06 game I got a message "FIFA06 requires Hardware Graphics Acceleration". So I downloaded and installed an updated flash player from MS and an updated graphics driver from ATI. Can anyone help me? Thanks so much.

A:Problems after updating Radeon 9200 series driver

Reinstall the old driver. Older video card don't do well lately with latsest new drivers from ATi or Nvidia.
Relevancy 43.86%

Hello guys!i-ve bought this model of pc yesterday here in China (isn-t a fake pc because i've bought directly to the dell shop). The problem is that all USB port doesn't work and also the integrated webcam.I've tried a lot of solutions, also enter in the administration panel where you can check all elements in the pc.

Please help me, i'm so tired 

A:DELL INSPIRON 24 series 3000 / all in one USB PORT PROBLEMS

Return it!
Relevancy 43.86%

I was installing a new version of mcafee when the was a problem in my powerdown its a device which turns all pephirals off like speakers printer moniter etc off the powered down failed so of of help Solved: Screen Blue series problems. please Death everything just turned off i plugged all the sockets into the mains directly as the powerdown had given my computer a big problem as i turned my Solved: Blue Screen of Death series of problems. please help computer on vista would not start so i used startup repair on vista disc i ve succesfully manges to start vista and a driver installation box for mcafee comes on the corner then a bluescreen quickly appears then the computer restarts and does the whole sequence again basically it keeps looping after like Solved: Blue Screen of Death series of problems. please help two or three loops the mcafee driver says succesfully installed i was guessing the problem may be the mcafee driver so i disconnected my internet dongle so it wouldnt connect to internet and download any drivers but the message never came up anyway as it had installed and neither did the BSOD I became excited and Solved: Blue Screen of Death series of problems. please help thought the computer was ixed But when i plug in dongle it does BSOD again i dont know what the problem is but after many quick attempts i ve managed to get lots of minidumps transfered onto usb please can someone help me i know you have the knowledge please please help me nbsp

Relevancy 43.86%

HI I series Champion problems mic/headset X-fi IO fornt panel and have had my x-fi Titanium Fatal ty champion series sound card for a while and was working nicely with my X-fi Champion series fornt IO panel and mic/headset problems speaker setup but could never get the IO panel to work properly and just left it for a rainy day to fix this day has now come As I am now using Ventrilo for BF to chat with my clan members in game I needed to grab a headset with mic so went and brought the Corsair HS A after trying it out at a friends place and was impressed with the sound quality After plugging in the IO panel there are several things that are wrong with it firstly there is a horrible sound coming through the speakers when I do plug it in and it does not recognise my mic and headset when plugged into the to IO ports in the front also it does not light up behind the red buttons on the front of the panel I have read elsewhere that this is happening to a few other panel insisting that the pins on the connector need to be pushed firmly in but I have pushed it in as hard as I can without breaking it I also nooticed on the connector from the IO panel to the soundcard there was an orange wire loose is this supposed to be like that I tried to re seat it back in So I tried the back ports the headphone works but I am unsure what settings to do to get the mic working when I enable it in the recording devices firstly I can hear my own voice and also there is a lot of static in the background I have it set to sb-x-fi microphone in ventrilo not quot what you hear quot but am unsure on the best overall settings to use I am on Windows Ultimate I have the latest BIOS version for my motherboard and the latest creaative drivers the on board audio has been disabled in the BIOS and is not physically plugged into the motherboard either any help would be appreciated

A:X-fi Champion series fornt IO panel and mic/headset problems

I don't have my system currently installed (I had to remove it as it interefered with my Recording Studio audio interface unit) but there are two cables from the front panel module to the sound card. I also do not recall any loose wire.

I would contact Creative support about the problem with the wire and the front I/O assembly.

I only used the headphone output one time with mine, and it worked OK, so mine must be OK.
Relevancy 43.86%

Hello! Recently I had my motherboard replaced (Intel for AMD) since my last one got fried because of bad electricity. The new one works great. Only problem I have is my video card. When I downloaded and installed a game it said that it can`t be launched because there is no direct 3d device. I checked in dxdiag and under the directx section there is apsolutely no information and under its features it says "not available". I tried to install drivers from CD (my video card is nvidia GTX560Ti) and then update it to latest version of drivers and...still nothing! Please help.
P.S could this be linked to a fact that I can`t update my windows? It gets stuck on "checking for updates" but that is a different issue?

A:Problems with Video card drivers (GTX560Ti series)

My mistake! not a video card a graphics card!
Relevancy 43.86%

Hey guys as the title states I am having constant problems with my graphics driver crashing with the following message quot your graphics driver has stopped responding to commands quot something along ATI Radeon 9550/X1050 problems series constant those lines anyway lol I am using an AMD Athlon processor With the ATI Radeon X series MB VGA graphics card MB DDR RAM I recently tried updating to the latest drivers from ATI but had severe installation problems and ended up having to do a system restore So i am using the standard driver I can play counter-strike and battlefield reasonable consistantly Wont crash out for a few hours or ATI Radeon 9550/X1050 series constant problems so Which points out this cant be an overheating problem But when i try to play WoW i get about - minutes game time before it stops responding If anyone has any knowledge about how to fix this it would be great Edit Since doing the system restore my CPU speed has gone from ghz to mhz wtf is up with that nbsp

A:ATI Radeon 9550/X1050 series constant problems

Try "undoing" system restore. You should get get back your 2.4ghz processor speed. Since you are running only 512 mbs of ddr ram, you are operating with minimum ram. Try doubling that, it will help and might stop the crashes. Does your "paging file" (virtual memory) have at least 1 or 1.5 gigs? You have to have that. Good Luck.
Relevancy 43.86%

Hello, I'm having trouble with the video, at least 3 times a day I have to reboot the laptop, because the windows of the bar disappears ...

I have tried to unital and install all video drive, windows update... What I can do?
Relevancy 43.86%

I recently upgraded to vista ultimate from xp pro,on my xp setup I had a dvi to hdmi cable going into my tv which i use to watch movies etc through the pc. I had it set up as an extended desktop so I could still use the normal monitor while the movie played on the tv.
I have exactly the same setup now I have vista ultimate installed, but if i drag vlc or windows media over to the extended desktop and try to full screen it, it jumps back to the pc monitor and fullscreens on that one. Any ideas how i can get it to fullscreen on my tv?
Relevancy 43.86%

Hello Sevenforums,

I have my HP 4050 Laser printer hooked up through a usb to parallel port cable and windows recognizes the printer but that is all it does. In the devices and printers list of all my related devices there lists two "shadow" 4050's that were created as windows discovered the new hardware that do not seem to do anything at all as they are set to be offline and a third "online" printer that will not print any job in the queue. I am sure there is a logical explination for this but i just do not know what it is. If anyone has delt with this before please help

A:HP LaserJet 4050 Series PCL5 Printing problems.

Alpha90, Something tells me that your parallel<>USB device is not passing all the signals that the computer or printer need.
I recommend getting a small parallel network device that you can plug in and connect to your network. They work great and at a non-profit that I volunteer at we have used them lots of times do to funding constraints.

They are pretty cheap and anyone on your network can install the driver for the device and printing works.
D-Link is one that comes to mind.

Relevancy 43.43%

Update March - This seems to be a problem others have had but no solutions yet See the Microsoft Forum post Tablet Problems installing Series Samsung 7 the Accelerometer drivers I have had some difficulty installing the drivers for the automatic rotation function for the Samsung Series It worked fine with the developer preview but I did a clean install of the Consumer preview and I am no longer able to install it I downloaded the windows drivers Motion Sensor and ran using the Windows compatibility The software appeared to instal but the device manager shows that it is not working and the status indicates that Windows cannot load the drivers required To make this a bit more mysterious I can't uninstall the drivers since the uninstall program kicks off an error that the program cannot run because it is awaiting a reboot I have rebooted several times but this does not appear to be a real issue My question is if anyone has encountered this sort of trouble and what work-arounds might have worked The other question is whether there Problems installing the Samsung Series 7 Tablet Accelerometer drivers is a particular registry entry to look for to unlock the 'waiting for reboot' issue Thanks for any help
Relevancy 43.43%

I was upgrading my girlfriends motherboard so that I could install an AGP video card that I bought for her The card is a geforce fx mb but thats not the problem only how it all started Her previous computer is a a Problems system w/ 2400 series MP4M266a dell from mobo new Dell series and a perfect pain in the to dismantle but i finally got everything apart safely I work w an anti static wrist guard i have the computer and everything succeptable to shock on top of a table which is layered in card board so i belive Problems w/ new MP4M266a mobo from a dell 2400 series system im pretty static free The new motherboard that I purchased was bought from partspc com and is a quot Chaintech MP M A quot The memory that I am using is the memory that was in her old machine stick of mb mhz DDR and an upgrade of stick of gig mhz DDR ram cd drives one cd rom and the other is again an upgrade as it is a cd-rw Finally her stock hard drive as well I install everything just fine no hangups at all and the process goes smoothly I have done this numerous times before and while I am not an expert I do know what Im doing I flip the power switch after configuiring all the btw this is a NEW case dell cases do not work with aftermarket MOBOs plugs for USB Speaker HD led Power Switch and power LED At this moment looking at the front of the case the hard drive LED comes on orange and stays a steady ON no pulsing on off as a working HD The processor fan p ghz comes on but then starts to pulse a bit coming on and then going off and the computer remains in this state The monitor is hooked up but is in the no signal state where the light is orange and nothing is displayed Thinking this strange b c the supplied powersupply w the case is new and is about w and should work i turn off the machine wait a few seconds and turn it back on This time the fan really shudders and then continues at its pace and still no healthy boot nothing is happening But at this time I notice that the CD drives do not eject despite being plugged in and I cannot discern the telltale hum of the hard drive at work I run to the grocery store and when i return the computer is now off despite the fact that it was running when i left it i try turning the computer back on but now NOTHING is turning on no fan nothing I carefully touch a small grey componant of the motherboard and get a pretty bad burn There is a current in the board but something is wrong w it obviously now my dilema is this after ready though my process where did i go wrong is it the motherboard I did everthing i have been taught and learned about pieceing a computer together and have never expereinced this before I even tried hooking the old computer back up w out the new motherboard and now the hard drive is not being detected the computer through an IDE detection can identify the make of the harddrive and capacity but it will not boot past the dell quot press f for system config f for boot options quot screen Ive tried everything i can to try and get this machine to load w the hard drive but now it looks like i may lose my HD but i have to take it in to find that out for sure Please help I need to know if anyone has any experiece w somthing like this and what advice you may have With repairing HD s recovering data and what to do w this motherboard in this situation Thank you nbsp

A:Problems w/ new MP4M266a mobo from a dell 2400 series system

Hi, that sounds kind of like what I did. I have a dell 2300(very similar to 2400), and I wanted agp. I replaced the mobo, and REUSED(you said they couldn't be) the stock case. It worked fine.

I don't really know, you may have a faulty motherboard, or possibly a bad psu(have you tried the old psu, the psu's that come with cases are usually crap). Or I guess you could have a dead hd.

That really sounds a lot like when my psu died in my gaming rig. It sort of worked, but wouldn't boot.
Relevancy 43.43%

I ll tell you the best I can I am having some video display problems misc blocks double cursors square cursor with a small one next to it or one large cursor like if you did it in safe mode or a straight line up and down in place of the cursor I called Dell they wanted for one time help he thought it was a virus Series ATI problems Funny 6700 cursor and with video Dell I don t think it is I have mcafee and malware bytes both showed no virus I pressed f at start up to run a dianogstic on the pc and when I ran a through video card test I received an error quot - quot the first time I ran it I re-booted ran it again but didn t get an error the nd time I rolled back my ATI Radeon driver to the previous driver maybe the new driver months later then the first was causing me problems Does any know or think the error quot - quot integrity problem is the cause Please help I don t know if I should get a new video card or not Also sometimes my computer won Funny cursor and video problems with Dell ATI 6700 Series t start up after I do a restart but I think it s trying to access the video card and since theres a problem it won t boot up Thanks nbsp
Relevancy 43.43%

I have my printer for a while and never installed it cause i don t needed it But now i need it for school The problem ( Printer With 4300 ) P4310 my Solved: lexmark series Problems is it won t install It s an All-in-one printer I have deleted the printers in configuration and also in the servers in file The CD is a little damaged and when i try to install it with the CD it starts copieing it gives and error setup can t copie lxcehelp hl i think that s because my CD is damaged When i press cancel i can continue the setup But then it gives an error that sais wavs exe needed that i need to check if the given Solved: Problems With my lexmark 4300 series ( P4310 ) Printer location is correct I searched it in my computer but can t find it When i Solved: Problems With my lexmark 4300 series ( P4310 ) Printer type wavs exe in google i only get german sites I also tried downloading it from lexmark com there isn t software for P there only for P and P and a site i found on this forum but also that doesn t work then when it s at extracting Thumbs db it sais access denied in my language When i Solved: Problems With my lexmark 4300 series ( P4310 ) Printer press ok the whole installation shuts down I ve searched in my computer and try to install it over and over again but still no succes I hope someone here can help me now and otherwise i think i ll throw the printer trough the window nbsp

A:Solved: Problems With my lexmark 4300 series ( P4310 ) Printer
Relevancy 43%

I have a Pavilion G6 2000 series, I bought this laptop 2nd hand it has a generic cd/dvd bezel that does not stay on. I have found a G6 1000 bezels but I need to know if it will fit before I purchase a replacement that may or may not fit. Help????
Relevancy 43%

I have an Acer 5749 Series laptop that is having problems with performance and is hanging up upon logging off and opening the start menu. Help would be greatly appreciated.

A:Acer 5749 Series Laptop Problem: Performance and Problems Logging Off

Hello again Jesse mate have you tried the usual that I always suggest - < if necessary include the /f and /r in the command line as per Option2 (safe mode)

if no go then
ADW download from bleeping computer delete any rubbish found with the malware scans
(NB If one is running Kaspersky security it may rant about ADW - just ignore it or disable Kaspersky while the ADW is being used)
Relevancy 43%

I turn on my laptop and the dell logo pops up and it just goes to a black screen with only my cursor being visible The other day it was working just fine then later on the fan starts getting really loud and I turn it off and turn it back on This is when my nightmare starts I turn it back on and stays on the dell logo and says quot diagnosing your pc quot The fan is still running Inspiron Cursor With 11 3000 Only problems Intel Black Help] w/ series Screen other [Please loud then after a few hours trying to get it work the fan just stops making noise altogether I run the system diagnostics and it says my fan and hard drive won t respond I open up my laptop to what s internally wrong with the fan and hard drive All I see is the fan doesn t spin but after several minutes it starts to I don t [Please Help] Intel Inspiron 11 3000 series Black Screen With Only Cursor w/ other problems see why it says my hard drive won t respond when I fully inspected it and there was no [Please Help] Intel Inspiron 11 3000 series Black Screen With Only Cursor w/ other problems visible damage whatsoever I put everything back together and keep trying and which it being in the current result that is stated in the beginning Only thing not mentioned is that the fan is just struggling to spin at a constant rpm In the diagnostics even though the fan is somewhat spinning it still indicates the fan and hard drive are unresponsive This the worst thing for me right now because I m looking for a job and start college soon
Relevancy 41.71%

I want to invest in a SDD to replace my dying westgate harddrive. I've set my mind on Corsair but I want to know the difference between the eXtreme series and the Performance series ( According to the website, X SDDs reads a little bit faster, but the P series writes a little bit faster. The only other thing is that the P series is around £100 cheaper!

So is the X series worth the extra £100?

Relevancy 41.71%

hey there

I have a question, what is a better video card to get?
6800 series or the x800 series?

the graphics card that i have in right now just isnt cutting it for me, NVIDIA GeForce FX 5700 I mainly play HL2, CSS and Doom3. I was woundering what card is gonna give me better fps for those games. i have the specs of my comp here (vv) and i wanted to kno what card(s) would run great with the things that i have.

the specs of my comp are:
Video card:NVIDIA GeForce FX 5700
mobo:GA-8IPE1000 (2.0)
processor4 3.0 Ghz (OC'd to 3.4 Ghz at the moment)
PSU: 420 thermaltake ATX 12V
Cooling: prestock (gonna change very soon)
RAM: Genaric PC 3200 mismatched
HD: Maxtor Dimond MAX+9 160GIG

What do u suggest i should get?

Relevancy 39.13%

Hi I have some Toshiba Tecra M series but for some reason the laptop no longer works with a battery attached and just get flashing light on the laptop It works fine with power but won't swatch on at all with a fully charge battery I have tried many and it's not the battery I have taken the laptop apart but can t find anything that is wrong So it must be the battery motherboard M10 Toshiba same Tecra the series series A10 asTecra motherboard? and or charge circuit resisters gone on the M Anyway Toshiba Tecra A10 series motherboard the same asTecra M10 series motherboard? I was looking at a motherboard replacement On looking about it appears that Toshiba released a M and a A series They both look about the same to me with the same Toshiba Tecra A10 series motherboard the same asTecra M10 series motherboard? fittings but to be sure can anyone tell me if a A motherboard is the same as the M motherboard Maybe someone who works with these day in day out hopefully will know Just don t want to buy and A if it s not compatible with M case and fittings
Relevancy 38.27%

Any Idea or ETA for Lenovo Ideapad Y Series W/ New Nvidia Gtx 10 Series ( 1060 / 1070 / 1080 ) ? or New Intel i7 7th Gen Processors??
Relevancy 38.27%

I'm hoping to get some info from anyone that has some good stats on these cards I've been outa town for days and wasn't near my freind MY PC over the release of Series... ATI 200 vs GTX 4000 Series the New GTX cards so sadly I didn't get to see all the info and the Benchmarks for it Other than Kingpin's Crazy Vantage Score Other than that I just got home and I'm GTX 200 Series vs ATI 4000 Series... wanting to get the Scoop on these cards I've been reading a little tonight tho Also I'm hoping for some info about the new ATI and they are looking VERY nice and GTX 200 Series vs ATI 4000 Series... looks like ATI might have finally made something that can actually compete with Nvidia this time around Nvidia's had the Enthusiasts Market for a good Year and a half or so IMO but I've read only a little about them from what I've seen they look good but if anyone has some info or links to Info about them then please share I kno most the ATI benchmarks that are out now are not completely trustworth cuz the cards aren't officially here yet But please post some links and info if you can Thanks Also What should I do Buy a cheap or Cheaper used GTS and SLI them or sell mine and SLI GT G 's after price drop becuase of the new series or should I try and hold out and get a or should I get a ATI looks good and now I'm in a Fickle as what I should do I knew what I needed to do until I read about there new release comin now I'm shattered and need to wait for more info I take in a lot before I buy things little OCD I think I'd call it haha or a lot actually ok this is long enough Thanks please post info links

A:GTX 200 Series vs ATI 4000 Series...

If you want 8800GT's, the prices have dropped to about $150 average on newegg which is great considering i got mine for $250. Personally, I'm against SLI, but if you're for it and would have to make a purchase now, go with 2 8800GTS g92 as they're averaging about <$200 (MSI's 8800GTS is on newegg for $177) and they provide some performance over the 8800GT. Since the 9800GTX is basically the same performance as the 8800GTS but more expensive, then forget that.

If you can wait a while to make a purchase, I've heard that the newer 9800GTX+ will have higher stock clocks that will deliver better performance with its newer drivers too, and this card comes out in mid-July. It's supposed to be priced around $230 and it's chip is built on 55nm process. This card sounds attractive, but we'll have to wait for solid reviews of the card first.

ATI... I don't like them, so I'm sorry but I can't tell you anything about them.
Relevancy 38.27%

I'm getting really pissed off for the newer games. Some of them requires an Direct X 10 video cards to run it properly. Do you guys think 7900 SLI can run newer games smoothly such as Lost Planet? On my computer I test my system requirements and it failed for recommendations. It says that it requires Dx 10 cards to play smoothly.

A:7 series SLI versus 8 series (No SLI

I'm sure you will loose some of the gee wiz graphics not using a DX10 card but so far most game makers have been making games that use either DX9 or DX10. As far as lost planet is concerned here is whats posted on their official forums as supported vid cards.

The following is a list of video cards that our R&D labs have tested in conjunction with NVIDIA and ATI, and have been confirmed to work.
NVIDIA (DirectX 9)
GeForce 6600
GeForce 7x00 series
GeForce 8x00 series

NVIDIA (DirectX 10, requires Windows Vista)
GeForce 8x00 series

Windows XP 32-bit Driver: ForceWare 162.18 beta (July 5th)
Windows Vista 32-bit Driver: ForceWare 162.22 (July 11th, 2007)
Windows Vista 64-bit Driver: ForceWare 162.22 (July 11th, 2007)

ATI (DirectX 9)
Radeon 1650
Radeon 1800
Radeon 1950

ATI (DirectX 10, requires Windows Vista)
None currently.

For R600 (Radeon HD2900, etc.) cards there is a hot fix from ATI:Click to expand...

the 7900 is showing in that list so it looks like it should work
Relevancy 37.41%

will the 9 series make the $220 8800gts drop to something like $100 or will it still be $200?

A:Will the 9 series cards make the 8 series cards cheaper?

eventually, and then the 10 series will do the same to the 9 series, rinse and repeat. basically as long as its one of the fastest cards the gts will be expensive, when it becomes obsolete (relatively) its price will drop.

from the question i assume you are looking to upgrade, if you want to only spend $100 then i'd say your best bet is an OCed 7600 GT, lotsa bang for your buck, i can run FEAR with pretty high settings with just one of them.
but really, what are you looking for?
Relevancy 34.83%

Is the nVidia 4200 ti series older than the nVidia FX series?
I am pretty sure the nVidia 4200 ti series is older than the nVidia FX series, but am not certain. Thanks in advance for any responses.

Relevancy 34.83%

I have a Netgear DG834GT wireless router which works fine with my PCs which have G series network adapters. But with my laptop with an N series network adapter the signal disconnected every 20 seconds then reconnected; this was only a problem using it at home – everywhere else it connected well. I solved this by using a G series PCMCIA when at home. So far so good.

Now my wife has been given a work laptop which has the same problem. She can’t use a PCMCIA because the laptop has been set to stop her installing the software. So… should we get an N series router? Is there any reason it wouldn’t let us both work PCMCIA-free? And if we should go ahead, any advice on what specs I should get or avoid?

Relevancy 33.97%

So Dell made a really terrible 15 Series power 15 Can a board power board? a with Inspiron Dell Dell I Series Inspiron 5000 replace 7000 decision nbsp They have a transparent strip in the power button for an LED light to indicate if the power is on nbsp A power indicator is a given in any laptop no matter how cheap it is nbsp However Dell in all of it Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board? s genius decided to not include an LED bulb on laptops up to the Inspiron Series despite leaving a transparent slot for it nbsp Seriously what happened to this brand nbsp Do children make these laptops now I want to fix this as my laptop is no longer returnable and a power indicator is absolutely necessary nbsp So the only thing I can think of is replacing it with one from the Series somehow Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board? with some help probably This is a Dell Inspiron nbsp I also have an Inspiron nbsp Not sure which exact model I should get the part for Are they compatible Is there an easier way Like how Fn H turns on the hard drive indicator Thanks

A:Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board?

The systems use different case and mainboard designs -- and may even be made by different companies.  The answer in all likelihood is no.
I don't think Apple has produced a Macbook with a power indicator -- the PC vendors are playing follow Apple.
Relevancy 30.96%

hi people my miss has only gone and brought a eee pc series asus with out even telling me she fort she was getting a bargin for second hand wot a fool she is ive got it in front of me now and they installed windows xp on b they sold her it ive done a driver scan and theres updates that need to done series eee pc i havent eee pc series got a clue if its a clone copy or anything i was thinking eee pc series would it be best if i just did a clean installation of windows xp boot from usb witch i havent got a clue how to do or shall i just let it update its self PLEASE HELP she brought this for my year old daughter for Christmas aswell ive told her to get the money back but she wont THANKS IN ADVANCE GUYS and another thing is i have no usb eee pc series cd drive to attach to it to boot windows from it all boots up fine its just all these update what need doing nbsp

A:eee pc series

If it currently has Windows XP SP2 installed, you need to install the SP3 upgrade before you do a custom scan at Windows Update/Microsoft Update.

A custom scan will probably display over 100 post-SP3 high priority updates.

Relevancy 30.96%

Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciated

A:AMD R Series GPU's

EClyde said:

Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciatedClick to expand...

It depends on what you are referring to, there is not real issues with the R series GPU's in terms of display output. Most of the associated problems people are having involve a few things:

Some of the 4k monitors (The AOC for instance) use a very odd way to refresh which caused the display to flicker on the R9 series GPU's which was resolved in a recent patch.

Some high refresh displays using DP

and some others

However I would not worry, most of the problems if any are fixed via patches and catalyst revisions. If the manufacturer has to update something like the this its normally involves something like with their own software or certain things in environments not working together properly. I would not worry, I have done nothing to my PowerColor R9 290X trio and they all work great.
Relevancy 30.96%

Hey everyone. I currently have a GTX 580 and I want to upgrade that. I was going to get a GTX 770 but I'm now considering waiting for the GTX 800 series. Is it worth waiting for the 800's and when do you think it will be released?

A:GTX 800 series?

Well supposedly it's coming next year, but since crystal balls don't exist who knows exactly when, maybe in Q1 maybe not, maybe way longer,or if they'll be delayed even further, or how good they'll really be, or if they'll have bugs, or how much they'll cost. If anyone really knows at this point they are not likely allowed to disclose details beyond what I'm sure you've searched on Google otherwise they'd lose their job; and even what may be known now may change as changes and delays happen all the time.

In the end, it's up to you, if you need a new or better card now, buy now, if you want to wait there will always be another generation or series in the works, if the wait is confirmed to be short then sometimes waiting a bit is not a big deal, when the wait is longer waiting may not make sense.
Relevancy 30.96%

My HP PSC 700 Series All-in-one printer shows "HP printer disconnected". I have uninstalled and re-installed software, but it doesn't help. Does anyone know if there is a FIX for this problem?

A:hp psc 700 Series All-In-One

That so called software, Isit packaged with the printer?
If not, maybe u have the wrong drivers installed or the drivers aren't up-to-date?

Hope that Helps~
Relevancy 30.96%


The CD-ROM of my Mainboard can't be read by windows 7.
What can i do?

My mainboard is ASUS P45 and the CD-ROM is P5Q Series

A:P5Q Series

You could go to the motherboard web site and download whatever you need. What exactly are you needing that Windows 7 can't read?
Relevancy 30.96%

I GOt a think pad I series of ebay for because it was good for parts may be fixable i want to start rebuilding laptops its IBM model - CPU pentium MMX Speed unknown Ram Unknown suspected switched for a mb ram chip i had not quite sure if its in the right place Hard Drive UNknown dont pad series. I think care at the moment my goal is to get it to boot a linux live boot cd screen think pad I series. Size inch Optical drive CD rom possibly RW power adapter None used one i had laying around Those are from ebay listing except for things in brackets But to the problem at hand i thought ill try and put in mb ram throw in a linux live boot cd that only needs mb but when clicking power button i see nothing on screen just black my first thought because i could hear stuff was maybe the screen is dissconected but im not sure tell me if theres anything i need or if i need to open up and look around nbsp

A:think pad I series.

a quick look at the rams the 2 original were 32mb and 64mb but does anyone know what to doo?
Relevancy 30.96%

Hey guys,

Hope you're all well, been a while since I was posting. However hope you can help me here.

I recently purchased a new ATI R9 200 series. However when outputting through HDMI the speakers make a 'clicking' sound. It's not rhythmic or in time with anything on the screen. I have the latest drivers installed.

Anyone have any ideas?



A:ATI R9 200 Series

Try adjusting volume settings. I had a similar thing with my R9 285
Relevancy 30.96%

I know.......another question about which gfx card...blah blah blah.....
Sorry guys, but I just have to ask...
I have my eye on a 'Gainward GeForce 4 PowerPack Ultra 750 128mb 8x xp Golden Sample TI-4800SE' which I can get reasonably cheap £88 (UK)
Is this a good choice (am currently using a GF3 Ti200 64MB) or should I look to a mid range GF FX 5 series, or even a Radeon in the same sort of price range.........trying to get the best for as little as possible, shortage of cash...
I like to play UT2003/C&C General/Mohaa + Spearhead and a few others.
Using XP Pro-Abit KR7A-512MB DDR.
I would be very grateful for your thoughts/opinions...........even if you just say "use Google !!!" etc.......................

Relevancy 30.96%

I've had my P50 for a while now, and I keep coming back to the Lenovo website from time to time, looking at various accessories that I think I'd like to pick up.  However, Lenovo still doesn't list the P-Series in their drop-down menues when trying to tell them which machine you have. Are we supposed to just tell them we have W-Series, and hope we're not asking for a Docking Station, that won't be compatible between the P and W series systems? Does anyone else find it odd, that Lenovo is "hiding" things about the P-Series laptops? Thanks for the input!
Relevancy 30.53%

Relevancy 30.53%

I'm trying to connect a Hp Jornada 540 to my desktop pc using an external ir device, but for some reason the handheld won't recognise the pc and vice versa. I know both devices do detect each other because the ir light flashes as though it is trying to connect but no joy! Both ir devices work as they have been tested with a mobile phone.
Any help will be appreciated
Relevancy 30.53%

Hello there,
I am thinking about upgrading my current system. I will possibly get the GPU in a about a month or so, and I will buy the CPU and the motherboard and the Cooler possibly during Christmas. Are the FX series gonna be out by Christmas or should I go with the Phenom II x6 1100T BE?

I will be using the:
GA-990FXA-UD3 motherboard
Noctua NH-U9B SE2 CPU cooler


A:Should I wait for the AMD FX Series?

The FX cpus should be out around september i would think so i would wait if i were you.
Relevancy 30.53%

hi i have a hp 11o desktop pccan someone ples tell me how to boot from a memstick ples
Relevancy 30.53%

We just had another thunderstorm here. I couldn't turn on the PC when I got home 'cuz of
it. My pc, like me, is allergic to voltage spikes. I develop severe allergic reactions to hi voltage/amperage.

I have a half a dozen of the $5 surge suppressors layin' around here. I've seen some that go for $205, with protection guarantee, and am wonderin' if the $5 SS'ers, plugged in, IN SERIES, will give the same degree of protection???

Relevancy 30.53%

Rumor has it that XP cannot print to Laserjet 4 by HP. Is this true?

A:XP with Laserjet 4 series

looks like they kinda work.

from HP's support site.
Relevancy 30.53%

Hello I am new to Tech Support Guy and hope someone can help. Sometimes when downloading using uTorrent my download speed disappears completely. Why is this and what can I do about it? Thanks.

A:downloading TV series

as you are new and recently signed up - you should have read the rules and agreed to them
you would have seen we are unable to help with utorrents

closing post
P2P and File Sharing - We do not support P2P file sharing applications or web sites where the aim or much of the content is illegally shared copyrighted music, videos, or other files. This includes torrents, Kazaa, LimeWire, RapidShare, Pirate Bay, and the like. Any threads requesting help for such will be closed. Obviously, this does not include legitimate sites like YouTube, Flickr, Vimeo, Metacafe, etc, that have a strong content policing policy. If you're interested in the topic of P2P, you are free to discuss it on our site, but information on how to use these services will not be provided.Click to expand...
Relevancy 30.53%

I am running Windows 7 build 7000, and I am having trouble trying to get my video card to work. The card is an ATI 7000 series VE PCI. It is recognized only as a standard VGA adaptor. Are there any known drivers out there. I tried importing my XP driver, but it failed to work as well.

A:ATI 7000 series VE

Quote: Originally Posted by nightmare

I am running Windows 7 build 7000, and I am having trouble trying to get my video card to work. The card is an ATI 7000 series VE PCI. It is recognized only as a standard VGA adaptor. Are there any known drivers out there. I tried importing my XP driver, but it failed to work as well.

Welcome to the Se7en Forums

Since many things in Vista are compatible with Windows 7, I did a search for a vista driver for your video card and came up empty. If any of our resident gurus know of a trick or two for this, feel free to contribute.
Relevancy 30.53%

who has this computer, i want you to create a recovery disk for me and send me the files on it plz, very urgent.

A:HP Dv7-4000 series

Hi contact hp they will be able to provide discs for you for a small fee
Relevancy 30.53%

I have two D-Link DIR- XTreme-N Gigabit Wireless Routers Pretend for my explanation that there is no wireless activity because that s not where the problem is My cable modem is downstairs connected to the first Router I ll call it quot Router A quot Router A is connected to a few systems and the router upstairs quot Router B quot Router B is connected to a few systems No systems upstairs can connect to the intenet I believe because of a communication error between the two routers Internet works fine downstairs So to summarize Router A can find Two series in Routers and access the internet but Router B Two Routers in series connecting through Router A cannot I thought that the upstairs router would be able to access through another router the same as any other connection but it can t for some reason I want to find out how to run these two routers in series so that I can have mulitple connections in each end of the house Can anyone give me some insight into how to set this up nbsp

A:Two Routers in series

Each of your routers need to be setup individually, and not through each other.
Once setup, plug the one router into the other. You should have no problems.
But your system would be happier with a switch or even a hub.
Are Router A and B the same brand? When each is used alone, do you get the same readings? Do you have VPN? or other security that could be blocking the second router out?
Relevancy 30.53%

Right, I had been debating with myself whether or not I'm going to get one of these monsters, when I discovered that I'll need to upgrade my power supply. Having asked around a bit, I was told I'd be wanting in upwards of 650W, which sounds like an awful lot. I don't want to have matched the cost of my new graphics card in electricity bills within the year, afterall.

But imagine my suprise when I read in a review that the GTS version (which I was considering) only requires 400W, while the GTX requires 450. Can anyone sort this out for me once and for all? What are the actual power requirements?

A:GeForce 8 series

It depends a lot on the amps on the 12V rail.

Appearing at
As far as power requirements go, the GeForce 8800GTS will require a minimum 400 watt power supply (with 12V current rating of 26A). The GeForce 8800GTX will require a minimum 450 watt power supply (with 12V current rating of 30A) and you can double those numbers when you start talking about SLI.Click to expand...

Personally, I'd use at least a 500 or 550 watt power supply for the 8800GTS and GTX, respectively; but you may be able to get away with what the article says. It also depends on hard drives, etc. With graphics monsters like that, too, I'd use only power supplies from a select few vendors, such as Corsair, PC Power & Cooling, SeaSonic, Antec, Enermax, or FSP. That's about all I can think of for now.
Relevancy 30.53%

Hello newbie here, my hard drive has 'locked' so it says , the hard drive came preloaded with windows 7 home, my question is,if I install a new hard drive and use my Lenovo recovery disc will I be able to install Windows 7, sorry if I seem to be a nummie but this is all new to me as I am a 'silver surfer'. Thanks for any help.
Relevancy 30.53%

I bought an I Series 1171-91u 8 years ago.  I tripped over the cord while I was charging my battery and busted to power input off the motherboard.  I got a new motherboard from Impact Computers and although it is a 1300i, I am unable to determine which one it is.  I tried to use auto detect from Support, but it would not detect my system. How do I get that number?  How can I find out which one I have so I can update my BIOS, I am having some problems and I can't get any good support from the supplier.  Thanks in advance.Samain 

A:How to tell I Series Mobo

Hi Samain, Welcome to the forum!  Sorry for such a late reply, but there should be a label somewhere on the systemboard, generally near the ram slot that will have a FRU number on it.

T61,T42(x2)T41,T40(x2),R40,T30(x2),T23(x3),T21,T20,X20,A31,A21M,600/E/X(multiples of each),770X,i1400(x2),760XL,760ED(x2 w/base),380XD,755CD,750P,360P,365X,560X,701C/CS,730T,PS/Note
Relevancy 30.53%

Hi all just joined and need help. Just bought an ASUS A8V Ai series VIA K8T800pro+ VT8237 motherboard to put my existing ram, agp graphics card and Athlon 64 X2 4400+ processor in. The motherboard doesnt recognise the CPU so I need to update the bios but for the life of me cannot do it.

On Motherboard it says its A8V Rev 2.00, on the box it says A8V-EAYZ and at startup it says A8V ACPI, Rev 1001, at another screen it says RV570 BIOS 702m/581e and again VIA VT8237 South Controller Rev A2.

I know I need to rename the update bios file and put onto floppy but have tried every combination above and at startup I hit Alt and F2 and it reads the floppy but the system does not recognise it, just says bios not found on floppy.

Desperate for help on this please.

A:A8V Ai series motherboard

I think your prob is your M/b is socket 939 and you CPU is an AM2. Ifso they're not compatible.( excuse me if I am wrong).
With regard to the Flashing I came up with the same prob on my Asus, from memory during the process the name changes, I then changed it to the original. Sorry if that sounds a bit hairy but its been a while since I had this happen.
Relevancy 30.53%

Can't get my scanner to work...reinstalled, checked config. - all okay. Says.."cannot detect". It's plugged in...worked last week. It's a 6200 series scanner not a 600 series. I need to learn how to proof...Thanks for any ideas ya'll may have...The exact error message I'm getting is - SORRY, SCANNER COULD NOT BE INITIALIZED. [SCANNER NOT FOUND]

[This message has been edited by JennyP (edited 09-29-2000).]

[This message has been edited by JennyP (edited 09-29-2000).]

A:HP ScanJet 600 series

I'm assuming that it does have power and that the scanner is on correct?
First disconnect the scanner and reconnect to ensure proper connection. To wit, a visual inspect is not good enough...
Also, when you reinstalled did you do a complete uninstall first? If not do that. Else, you are really just adding a new layer of paint over the old cracking layer, eh?

Don't know much about your series...I'll go look, but is it USB or no? Anyway, keep us posted...
Relevancy 30.53%

Hi All My first post to the forum Today I'm experiencing repeated blues screens i hope someone can help Thanks Here's the Minitoolbox BSODs of 124 Series log ------------------------------------------------------------------------------------------------------------------- MiniToolBox by Farbar Version - Series of 124 BSODs - Ran by Karl administrator on - - at Running from Series of 124 BSODs C Users Karl Downloads Microsoft Windows Ultimate Service Pack X Model G GX Manufacturer ASUSTeK Computer INC Boot Mode Normal Event log errors Application errors Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source Application Error User Description Faulting application name FBAgent exe version time stamp x a f Faulting module name FBAgent exe version time stamp x a f Exception code xc Fault offset x c c Faulting process id x Faulting application start time xFBAgent exe Faulting application path FBAgent exe Faulting module path FBAgent exe Report Id FBAgent exe Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source Series of 124 BSODs Application Error User Description Faulting application name FBAgent exe version time stamp x a f Faulting module name FBAgent exe version time stamp x a f Exception code xc Fault offset x c c Faulting process id x dc Faulting application start time xFBAgent exe Faulting application path FBAgent exe Faulting module path FBAgent exe Report Id FBAgent exe Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source Application Error User Description Faulting application name FBAgent exe version time stamp x a f Faulting module name FBAgent exe version time stamp x a f Exception code xc Fault offset x c c Faulting process id x b Faulting application start time xFBAgent exe Faulting application path FBAgent exe Faulting module path FBAgent exe Report Id FBAgent exe Error PM Source Application Error User Description Faulting application name IEXPLORE EXE version time stamp x c Faulting module name ntdll dll version time stamp x e Exception code xc Fault offset x cc Faulting process id x c Faulting application start time xIEXPLORE EXE Faulting application path IEXPLORE EXE Faulting module path IEXPLORE EXE Report Id IEXPLORE EXE Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x Error PM Source Application Error User Description Faulting application name FBAgent exe version time stamp x a f Faulting module name ntdll dll version time stamp x e bfa Exception code xc Fault offset x bfc Faulting process id x Faulting application start time xFBAgent exe Faulting application path FBAgent exe Faulting module path FBAgent exe Report Id FBAgent exe Error PM Source WinMgmt User Description root CIMV SELECT FROM InstanceModificationEvent WITHIN WHERE TargetInstance ISA Win Processor AND TargetInstance LoadPercentage gt x System errors Error PM Source Service Control Manager User Description The AFBAgent service terminated unexpectedly It has done this time s Error PM Source Microsoft-Windows-WHEA-Logger User NT AUTHORITY Description A fatal hardware error has occurred Reported by component Processor Core Error Source Error Type Processor ID The details view of this entry contains further information Error PM Source Microsoft-Windows-WHEA-Logger User NT AUTHORITY Description A fatal hardware error has occurred Reported by component Processor Core Error Source Error Type Processor ID The details view of this entry contains further information Error PM Source Microsoft-Windows-WHEA-Logger User NT AUTHORITY Desc... Read more

A:Series of 124 BSODs

Hello KCBluesman and Welcome to this Bleeping website!
Just as a test, boot into Safe Mode and run the computer for a couple of hours. Let me know if your crashes stop, or do they continue. If you don't know how to access Safe Mode, your user's manual will tell you. If you don't have one, SM is usually accessed by tapping one of the F-Keys (try F8 or F11 first) on boot. If you can run in SM without crashes, reboot and try Safe Mode with Networking (that will enable internet connection). Let me know the results of each.
Relevancy 30.53%

Como to think of it, both HP and Dell have kind of entertaining and marginally convincing videos/case studies of companies using their workstations (Dell with I think some photographer and a car manufacturer; HP with some 4k video producer). is it me or Lenovo P series does not have an analog video campaign of people/industries using their workstations? I for one, would find such case studies interesting.  edited:sorry; just found a few...(mod, delete at will).
Relevancy 30.53%

I hooked my hp pavilion up after moving and a series of 7 or 8 beeps comes on when i turn on tower.nothing comes on the monitor

A:series of beeps

What is your pavilion number,is it 7 or 8 beeps?
Relevancy 30.53%

Hey all,

I've currently got a second-hand 7950GT which had a voltage inductor break off, meaning I'm going to have to restructure the fans [they will no longer work on the card itself]. This came at a time where I've been overclocking, trying to decrease temperatures, etc.

I'm wondering if, for performance in DX9 games, two 256MB LeadTek 7950GTs in SLi would beat a single 8800GT / 8800GTS / 8800GTX?

I don't have Vista and I don't play DX10 games...yet. For the time being, would paying for a 7950GT at half the price of an 8800GTX and running the two cards in SLi give me a performance advantage?

I could then wait until prices fall on a 8800GTX.


Relevancy 30.53%

Hi Friends,
More than a week ago i have not been able to use my HP 600B series Desktop with serial number-TRF2310LFZ,Product number-B5G17A\BH5 and system BIOS-CO2_712.ROM v7.12.It displays error message-"No boot disk found or disk failed" on a dark screen.

Please how may I resolve this?


A:HP 600B series

sounds like the HD failed. You should probably hit the HP website for that machine and get a hard drive diagnostic test......but it sounds like that one is cooked.
Relevancy 30.53%

So does anyone have any links or info on the New Nvidia nm tech I know that they are planning to release the GTX series on a new nm Fab and that they will probably release a GTX b and b or some people are saying a and or something like that So does anyone have some links or good info other than some liners saying that NV is planning to make them Like any release dates or what not I've heard that they are going to silently release them RIGHT after ATI releases there new x and they are going to drop some quot Good quot new nm cards that will be very competitive yet single card solution New series...?? GTX200b the x is supposed to be out August - th give or take So hopefully we see some NV Green soon after that or the next day would sure rain on there parade So ya let me know what you all think and share your info and news with everyone Thanks

A:New GTX200b series...??

I haven't heard nothing on Nvidia's die shrink for their chips.
Relevancy 30.53%

I have been getting constant blue screens with different messages every time ranging from irql is not less or equal to page in non paged area to just no message at all.
This usually happens within 2 minutes of booting up the computer.
The last time this happened I had just installed a new keyboard driver and uninstalling it fixed it.
This time it came out of nowhere and I cannot solve the problem.
please help.

I have an hp p6557c with an AMD Athlon II X2 220 processor 2.81 GHz
also I could not attach the perfmon file because it could not find the filepath.

A:Series of BSOD's


I would updating this old driver. Old drivers are obsolete and can cause BSOD. Update them (links are provided)

hardlock.sys Tue Feb 03 04:34:08 2009 - Hardlock Device Driver
Aladdin Knowledge Systems: Support

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff80002c8e8b6}

Probably caused by : ntkrnlmp.exe ( nt!KeSetEvent+226 )

Followup: MachineOwner

0: kd> !analyze -v
* *
* Bugcheck Analysis *
* *

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002c8e8b6, address which referenced memory

Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ec20e0


fffff800`02c8e8b6 488b09 mov rcx,qword ptr [rcx]





TRAP_FRAME: fffff88002fd9810 -- (.trap 0xfffff88002fd9810)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88002565918 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002c8e8b6 rsp=fffff88002fd99a0 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000530 r10=0000000000000000
r11=fffffa8003d26b60 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz ac po cy
fffff800`02c8e8b6 488b09 mov rcx,qword ptr [rcx] ds:9390:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002c89ca9 to fffff80002c8a740

fffff880`02fd96c8 fffff800`02c89ca9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`02fd96d0 fffff800`02c88920 : fffffa80`03d26b60 fffff880`02565910 00000000`000004d4 fffffa80`03d13740 : nt!KiBugCheckDispatch+0x69
fffff880`02fd9810 fffff800`02c8e8b6 : fffffa80`00000001 00000000`00000000 fffff880`025658d0 fffff880`025658d0 : nt!KiPageFault+0x260
fffff880`02fd99a0 fffffa80`047840fd : fffff880`00000000 fffffa80`00000000 fffffa80`00000000 ffffffff`800009d4 : nt!KeSetEvent+0x226
fffff880`02fd9a10 fffff880`00000000 : fffffa80`00000000 fffffa80`00000000 ffffffff`800009d4 00000000`00000000 : 0xfffffa80`047840fd
fffff880`02fd9a18 fffffa80`00000000 : fffffa80`00000000 ffffffff`800009d4 00000000`00000000 00000000`00000000 : 0xfffff880`00000000
fffff880`02fd9a20 fffffa80`00000000 : ffffffff`800009d4 00000000`00000000 00000000`00000000 00000000`0000081c : 0xfffffa80`00000000
fffff880`02fd9a28 ff... Read more