Windows Support Forum

Panasonic CF-48 E Portcls.sys BSOD

Q: Panasonic CF-48 E Portcls.sys BSOD

Just got a gift from a friend. A Panasonic CF48E. Put a new HD in it, Installed WIN XP pro, and was happy... NO sound.. Looking at the Control panell, looks like the Multimedia Audio Controller has a ( ! ) in the yellow circle. Downloaded what seems to be the correct drivers for it, ir starts to install but mid installation I get the Blue SOD, that says portcls.sys, and it shuts down, and restarts the laptop real fast ( no time to read what the blue screen says..
Anyone see that problem before?
Any solutions? I read all kinds of suggestions, but none work.
Help please.

Relevancy 100%
Preferred Solution: Panasonic CF-48 E Portcls.sys BSOD

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Panasonic CF-48 E Portcls.sys BSOD

Try here:
http://www.panasonic.com/business/toughbook/toughbook-products.asp?cm_mmc=PCSC_Toughbook-_-iProspect_PPC%20-_-Google-_-panasonic%20toughbook

http://www.techspot.com/community/topics/panasonic-cf-48-e-portcls-sys-bsod.130384/
Relevancy 62.35%

Hello i've been getting portcls.sys bsod's in intervals of about 25 mins or something like that well mostly like that sometimes even 2 hours or more but lats 3 bsod's were in 20 min interval

I've attached my dump file
Please help me as soon as possible
Sorry for my bad English
If you need more info just tell me
 

Relevancy 62.35%

My system has been experiencing the blue screen of death for quite some time. However, it has been occurring much more frequently these past few weeks. Generally, it occurs when I am surfing the web and have multiple tabs open. I generally use Firefox, however, it has also occurred with Internet explorer. Also, it occurred one time right when I plugged in my usb printer, a dell 1110 laser printer. Twice, after I have rebooted my computer from the BSOD, it went right back into the BSOD immediately. However, it has never reverted to the BSOD at start up twice in a row. The information I took from one of the BSOD's is as follows:

Driver_IRQL_NOT_LESS_OR_EQUAL

STOP. 0x000000D1 (0X00000000, 0x00000002, 0x00000008, 0x00000000).

Sometimes it references "portcls.sys" and other times the BSOD doesn't.

Please help.

Thanks,
 

Relevancy 62.35%

I noticed when everytime I opened skype, it BSODs and says portcls.sys. These minidumps are from the driver verifier so hopefully the BSOD was triggered by the driver verifer. From what I read, it may be the sound driver or something but I'm not sure where to go about with it. Thanks

A:BSOD portcls.sys

BSODs were caused by the Virtual Audio Cable driver which is part of a program, 'Ventrilo'
Update/Remove it. Ventrilo - Download


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D6, {fffff9800ac6f018, 0, fffff8800435fb15, 0}

*** WARNING: Unable to verify timestamp for vrtaucbl.sys
*** ERROR: Module load completed but symbols could not be loaded for vrtaucbl.sys

Could not read faulting driver name
Probably caused by : portcls.sys ( portcls!GetMaxMapRegisters+5 )
DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION (d6)
N bytes of memory was allocated and more than N bytes are being referenced.
This cannot be protected by try-except.
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: fffff9800ac6f018, memory referenced
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation
Arg3: fffff8800435fb15, if non-zero, the address which referenced memory.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d14100
fffff9800ac6f018

FAULTING_IP:
portcls!GetMaxMapRegisters+5
fffff880`0435fb15 8b4150 mov eax,dword ptr [rcx+50h]

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR: 0xD6

PROCESS_NAME: audiodg.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff88008b45110 -- (.trap 0xfffff88008b45110)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffff9800ac6efc8
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800435fb15 rsp=fffff88008b452a8 rbp=fffffa800aa32f00
r8=0000000000000000 r9=0000000000000000 r10=fffff80002f95440
r11=fffff88008b45170 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
portcls!GetMaxMapRegisters+0x5:
fffff880`0435fb15 8b4150 mov eax,dword ptr [rcx+50h] ds:fffe:fffff980`0ac6f018=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002a8f25c to fffff80002ae2d40

STACK_TEXT:
fffff880`08b44fa8 fffff800`02a8f25c : 00000000`00000050 fffff980`0ac6f018 00000000`00000000 fffff880`08b45110 : nt!KeBugCheckEx
fffff880`08b44fb0 fffff800`02ae0e6e : 00000000`00000000 fffff980`0ac6f018 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x456cf
fffff880`08b45110 fffff880`0435fb15 : fffff880`0438c9ad fffffa80`0aa32ef0 fffffa80`0a1b9f98 fffffa80`099f3b60 : nt!KiPageFault+0x16e
fffff880`08b452a8 fffff880`0438c9ad : fffffa80`0aa32ef0 fffffa80`0a1b9f98 fffffa80`099f3b60 fffff880`04376110 : portcls!GetMaxMapRegisters+0x5
fffff880`08b452b0 fffff880`0438c1fe : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`0abbc260 : portcls!CPortPinWavePci::Init+0x351
fffff880`08b45340 fffff880`0437b0ee : fffffa80`0a1b9f50 00000000`00000000 fffffa80`093461b0 00000000`000007ff : portcls!CPortFilterWavePci::NewIrpTarget+0x1a6
fffff880`08b453c0 fffff880`04381e23 : fffff980`1a58cd30 fffffa80`0982d560 00000000`00000000 00000000`00000018 : portcls!xDispatchCreate+0xfa
fffff880`08b45440 fffff880`043dbeea : fffff980`1a58cd30 fffffa80`0982d560 00000000`00000000 fffff880`00000000 : portcls!KsoDispatchCreateWithGenericFactory+0x2b
fffff880`08b45470 fffff880`043d67a6 : fffff980`1a58cd30 fffffa80`09346000 fffffa80`09346060 00000000`00000000 : ks!DispatchCreate+0x11e
fffff880`08b454c0 fffff880`0437a897 : f... Read more

http://www.sevenforums.com/bsod-help-support/220698-bsod-portcls-sys.html
Relevancy 61.49%

Hello readers Lately i have been getting these blue screen errors and slow downs that may be related to my audio driver they say A problem has been detected and windows has been shut down to prevent damage to your computer DRIVER IRQL NOT LESS OR EQUAL If this is the first time seeing this error restart computer IF it appears again follow steps Check to make sure any new hardware etc If problem continues disable or remove any new hardware or software Disable Bios memory options such as charging or shadowing Technical information STOP x D x A EB x x xAF E FE Portcls sys- address AF E FE base at AF D Date Stamp e Beginning dump of physical memory Physical memory dump complete the BSOD has happened about times now and happens randomly and I find that when i click Scan my PC for problems on the dell technical support page the blue screen shows up everytime I downloaded and intalled driver Audio SIGMATEL STAC XX C-Major HD Audio Driver Windows Windows XP Windows XP x Multi Language Multi System v A from dell technical support My Audio is now making popping static noise anytime a sound plays even startup sound I have scanned my computer with Trenmicro PC-Cillin and AVG and no virus and have scanned for spyware no spyware My slowdon is constant before this problem Windows XP BSOD(portcls.sys) windows used to boot real fast say sec but now it takes real long to boot into windows minutes My CPU usage stays around with processes running before it would hover around - with the Windows XP BSOD(portcls.sys) same processes running i m out of ideas Any help and feedback would be appreciated Dell e Windows XP media center sp intel core duo Radeon X Intel PROset wireless GB ram Sigmatel audio nbsp

A:Windows XP BSOD(portcls.sys)

The Portcls.sys is certainly related to the sound card driver.

In some instances faulty RAM can invoke such BSOD's as well, but it does sound like the error is a by-product of another deeper problem, as the PC is taking a long time to start up.

Which process is using the high PCU % under task manager?
 

https://forums.techguy.org/threads/windows-xp-bsod-portcls-sys.548919/
Relevancy 61.06%

apologies in advance for length of post My system as it stands now Athlon AsusK VSE Del Gig Geil DDR Geforce BSOD p17.sys/portcls.sys Wits End WinXP At GT MB Soundblaster Audigy Antec NeoHE Fusion HDTV card Seagate GigIDE Western Digital Gig SATA LG B x DVD-RW DL for months now I ve been getting BSOD errors at random times At first this was mainly occuring with D games Oblivion HL etc and nv disp At Wits End BSOD p17.sys/portcls.sys WinXP sys etc and sometimes portcls sys but then it started happening more often and usually D with portcls sys was using onboard sound at time A few times while I was in the desktop no D graphics intense stuff going tried all the usual suspects Extensive memory test memtest no errors after hours driver cleaning reinstalling reinstall software virus spyware check background tasks off overheating Did actually clean out my GFX card heatsink which had clogged up - eventually complete reinstall of WinXP with the latest drivers WindowsXP was on the IDE drive Did extensive reading and research about portcls sys errors and found that it could be a problem with my onboard sound Disabled onboard sound completely no Audigy at this point and still got a couple nv disp and I think win bluescreens Decided to make brand new partition on my SATA drive and do completely fresh install of WinXP on this drive Unfortunately same errors still occuring I buy an Audigy sound card to see if thats the issue - I ve come across a few posts about portcls onboard sound issues - but this doesn t fix anything My regular BSOD s in D games seems to have come to an end but I ve been getting many errors otherwise - watching DVD s amp other video files with both winmedia player and WinDVD s - random blue screen even without sound playing I count at least - times I ve been wathing a DVD Video in full screen heard the windows messenger new message sound and instant bluescreen Have had it blue screen sometimes when I m away from the computer and only usual background processes running I also get the occaisional other BSOD win ntoskernel UDFS FILE SYSTEM x x E etc and after another extensive memtest run many hours zero errors I decide to buy a new powersupply rationalising it with reducing noise anyway - I HAVE made my system really quiet when I m not doing anything stressful Bought Antec NeoHE watt a couple days ago I have had BSOD s since then including one during writing this post all with p sys and D DRIVER IRQL NOT LESS OR EQUAL error I have of course looked at the IRQ s in device manager for possible conflicts disabling one or two onboard devices in bios and reseating the soundcard its currently as IRQ all to itself - although IRQL not usually related to hardware IRQ issue Used original drivers with Audigy and latest from creative WinXP SP and critical updates installed Bios Via Amd VGA everything driverwise is up to date The absolute HARDEST thing about diagnosing this problem is that I can t make it happen - I ve tried running a video while playing an mp having people message me on MSN while browsing the internet and other crap - I can t create the problem But with no media going and just typing in this post I open up another IE window go to google type quot diagnosing minidump quot into window press search and BANG - BSOD with D and p sys I ve even tried downloading windows debugging software symbols library not that I can make out too much from it Following Information usually appears DRIVER IRQL NOT LESS OR EQUAL Arg READ ADDRESS f cf ec f c a f cc ec memory referenced Arg CURRENT IRQL always this with p sys errors Arg always something like FAULTING IP p f or p d memory address ff call dword ptr eax lt - always appears Stack trace always has the list of addresses and always has at the top right p x d or p x f ---followed by a few p xXXXX etc ---then ALWAYS followed by portcls CKsShellRequestor vector deleting destructor x nt Rt Ipv StringToAddressA x d ---all stack traces differ after this I m not sure if all this is relevant ... Read more

A:At Wits End BSOD p17.sys/portcls.sys WinXP

I had a similar problem with a PC here at work. I disabled all onboard crap ( serial, printer port, ect) through the bios. This helped but still kept getting the old IRQ error. I did the tried and true method of tearing it all down and putting in one piece at a time...the problem wound up to be a failing mem chip. It was still working but not all the time. Once i replaced it...woo hoo its all better.
 

https://forums.techguy.org/threads/at-wits-end-bsod-p17-sys-portcls-sys-winxp.498854/
Relevancy 61.06%

Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFFA E BCP BCP FFFFF B BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Shu AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement week BSOD twice - + once portcls.sys a paged_area_in_nonpaged_area or is not available please read our privacy statement offline C Windows system en-US erofflps txt From the actual BSOD this is the information I've gathered paged area in nonpaged area and something called portcls sys I've googled both errors and the one thing that BSOD once or twice a week - portcls.sys + paged_area_in_nonpaged_area makes somewhat of sense is that portcls sys has something to do with audio devices When I do get a BSOD about half the time it's right as I've opened something that has sound like a media file or a Youtube video etc edit forgot to include my specs BSOD once or twice a week - portcls.sys + paged_area_in_nonpaged_area k GTX Realtek Audio drivers Win x Pro

A:BSOD once or twice a week - portcls.sys + paged_area_in_nonpaged_area

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/384208-bsod-once-twice-week-portcls-sys-paged_area_in_nonpaged_area.html
Relevancy 61.06%

Seriously need help with BSOD.
Started 13 Oct 2013 and happens at least once each day.
Same errors every time. portcls.sys is mentioned every time. A new version of this was installed about that time when a Windows monthly update happened.
I found an older version and installed it but BSOD continued to happen. This seems to be an audio driver.

Here is a screen report:

19oct2013
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: FFFFF881063AFFF8
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88005345770
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\101913-46831-01.dmp
C:\Users\John\AppData\Local\Temp\WER-564442-0.sysdata.xml

I have downloaded the suggested SF Diagnostics Tool.exe and ran it. I'll try to include the zipped folder here for you to examine.

Please let me know what else I need to supply to you.

Thanks!!

John B.

A:BSOD D1 possibly portcls.sys related

Welcome to the Forum.

Norton is a known cause of BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

Afc.sys Wed Jul 12 11:48:20 2006 (44B48D24)
Arcsoft(R) ASPI Shell (CD/DVD program)
Driver Reference Table - Afc.sys

pcouffin.sys Tue Dec 5 20:39:30 2006 (457584A2)
low level access layer for CD devices (A part of many different CD/DVD burning programs)
Driver Reference Table - pcouffin.sys

cmudax3.sys Wed Sep 3 16:13:16 2008 (48BE633C)
C-Media Audio Driver (WDM) by C-Media
Driver Reference Table - cmudax3.sys

AtiPcie.sys Tue May 5 21:00:22 2009 (4A005486)
ATI PCIE Driver for ATI PCIE chipset or [br] ATI PCI Express (3GIO) Filter[br]Found in my ATI video drivers (I have an Intel chipset)
Driver Reference Table - AtiPcie.sys

ASACPI.sys Thu Jul 16 09:31:29 2009 (4A5E9F11)
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
Driver Reference Table - ASACPI.sys

atikmpag.sys Wed Apr 20 07:22:32 2011 (4DAE3558)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
Driver Reference Table - atikmpag.sys

atikmdag.sys Wed Apr 20 07:53:29 2011 (4DAE3C99)
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver)
Driver Reference Table - atikmdag.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Run Disk Check on your Hard Drive(s): Disk Check

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Keep us posted.

BSOD BUGCHECK SUMMARY

Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Fri Jan 24 23:22:35.219 2014 (UTC + 6:00)
System Uptime: 0 days 0:17:42.796
BugCheck D1, {fffff88102f8eff8, 2, 0, fffff88005370770}
*** WARNING: Unable to verify timestamp for cmudax3.sys
*** ERROR: Module load completed but symbols could not be loaded for cmudax3.sys
Probably caused by : portcls.sys ( portcls!memcpy+2c0 )
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Fri Jan 24 09:28:15.382 2014 (UTC + 6:00)
System Uptime: 0 days 5:13:11.584
BugCheck D1, {fffff881051b9ff8, 2, 0, fffff88005347770}
*** WARNING: Unable to verify timestamp for cmudax3.sys
*** ERROR: Module load completed but symbols could not be loaded for cmudax3.sys
Probably caused by : portcls.sys ( portcls!memcpy+2c0 )
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
???????????????????????????????????????????????????????????????????????????... Read more

http://www.sevenforums.com/bsod-help-support/319620-bsod-d1-possibly-portcls-sys-related.html
Relevancy 61.06%

BSOD appears only while playing ut2004. BF3 etc works fine.
Appeared after graphic card change Ati 4870 --> GTX 560 Ti

Everything at stock clocks.
The most of components are half year old.
OS installed 08.19.2011

System specs:
AMD Phenom II X4 955
Asus M4A87TD/USB3
2x4gb Kingston HyperX 1600mhz DDR3
NVIDIA Geforce GTX 560 Ti
Creative Soundblaster X-Fi titanium
Samsung F1 750gb, own 60gb part for OS.
Windows 7 Ultimate x64 retail

A:BSOD - while playing ut2004 (portcls.sys)

Code:
Loading Dump File [F:\BSODDmpFiles\valtsu\Windows_NT6_BSOD_jcgriff2\021212-16863-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03259000 PsLoadedModuleList = 0xfffff800`0349e670
Debug session time: Sun Feb 12 06:36:24.716 2012 (GMT-7)
System Uptime: 0 days 0:36:56.308
Loading Kernel Symbols
...............................................................
................................................................
...................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff88003f8cbf9, fffff8800379bd00, 0}

Probably caused by : portcls.sys ( portcls!CPortPinWaveRT::PowerNotify+1829 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff88003f8cbf9, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff8800379bd00, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
portcls!CPortPinWaveRT::PowerNotify+1829
fffff880`03f8cbf9 3b4828 cmp ecx,dword ptr [rax+28h]

CONTEXT: fffff8800379bd00 -- (.cxr 0xfffff8800379bd00)
rax=0000000000000000 rbx=00000000c0000001 rcx=0000000000002000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88003f8cbf9 rsp=fffff8800379c6e0 rbp=fffffa8008144060
r8=0000000000002000 r9=0000000000000000 r10=fffffa8006d0e158
r11=fffffa8006d0e158 r12=fffffa800c925190 r13=fffffa8007743790
r14=fffffa800c7e3330 r15=000000000012c000
iopl=0 nv up ei ng nz na po cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010287
portcls!CPortPinWaveRT::PowerNotify+0x1829:
fffff880`03f8cbf9 3b4828 cmp ecx,dword ptr [rax+28h] ds:002b:00000000`00000028=????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x3B

PROCESS_NAME: audiodg.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff88003f8cbf9

STACK_TEXT:
fffff880`0379c6e0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : portcls!CPortPinWaveRT::PowerNotify+0x1829
FOLLOWUP_IP:
portcls!CPortPinWaveRT::PowerNotify+1829
fffff880`03f8cbf9 3b4828 cmp ecx,dword ptr [rax+28h]

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: portcls!CPortPinWaveRT::PowerNotify+1829

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: portcls

IMAGE_NAME: portcls.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bcc... Read more

http://www.sevenforums.com/bsod-help-support/213796-bsod-while-playing-ut2004-portcls-sys.html
Relevancy 61.06%

So... after i installed Win8 this has happened to me....
It has also happened when someone answeres MY call to them.

I've tried to understand the crashdumps myself but im not so good with this...

The weird thing is that it doesn't happen EVERY call... but just sometimes... when my comp. has been running for a while...

Hope i've included all the nessesary information.
Let me know if something is missing.
And thanks for taking your time to help me!

A:BSOD portcls.sys when answering skypecalls

I've tried looking at the .dmp again... WIN8_DRIVER_FAULT makes me think there is some problem within windows 8 but i can't understand where i should look?

http://www.eightforums.com/bsod-crashes-debugging/17349-bsod-portcls-sys-when-answering-skypecalls.html
Relevancy 61.06%

New MSI GE62 with fresh install of 8.1 Pro. All drivers are the latest. Have reinstalled Video and Audio drivers. BlueScreenView says Filename: ntoskrnlexe | Address: ntoskrnlexe+152f36
portcls.sys | portcls.sys+304cc

Bug check code: 0x0000009f | Caused by driver: portcls.sys | Caused by address: portcls.sys+304cc

I did google portcls.sys and all info pointed to an audio driver. BSOD happens only when it's asleep. Any help would be appreciated .

http://www.eightforums.com/bsod-crashes-debugging/76108-bsod-during-sleep-portcls-sys-power_driver_state_faiure.html
Relevancy 60.2%

was using virtual audio cable to send audio from media player classic to VSTHOST it three BSOD with programs portcls open audio worked but VSTHOST doesnt let me apply a stereo vst plugin to the front speakers the rear speakers the center and portcls BSOD with three audio programs open subwoofer independantly i found a program that does it is called live professor well it isnt finalized yet and still in beta stage although the website said the software was used in places where there would be a public listening i portcls BSOD with three audio programs open thought that was worth something ever since i portcls BSOD with three audio programs open first tried using live professor i couldnt get any audio to the plugin the first time was my mistake because i routed all the inputs and outputs for the plugins but i forgot to connect each plugin to eachother after i did get the plugins connected to eachother i couldnt get the audio to stop skipping i had to use asio all to get audio into live professor because the only thing it accepts is asio i also learned VSTHOST would not work with the regular creative asio drivers but would work with the asio all drivers well i cranked up the buffer in asio all all the way to samples and it still wouldnt stop the audio from skipping keep in mind i run foobar with asio drivers all the way down to ms latency with four instances of impulse response convolvers and three time delays totalling seven vst plugins at ms well i posted on the live professor forum and somebody said maybe it was my computer specs and i was asked what they were i went back into VSTHOST to gather up some comparison information and i stopped the VSTHOST running but didnt close the window i also stopped the media player classic home cinema and i dont remember if i closed it and reopened it or left it open but i opened up the live professor program to try and get it to run i think i was just finishing up trying asio all in VSTHOST and going back to live professor to see what was wrong i also believe it was then that i realized i forgot to connect each plugin to eachother well what happened is audio was playing choppy and i had VSTHOST open too i think maybe i stopped the media player and started it again to see if the driver would refresh well the audio stopped playing and wouldnt start again then a few moments later the computer crashed with portcls sys on the screen now ever since then whenever i go back into VSTHOST the audio refuses to go into the vst plugins i can connect the input box to the output box directly and get the female voice from virtual audio cable but if i put a plugin inbetween those two boxes there isnt any audio anymore to make matters worse asio all wont let me select the virtual audio cable anymore i've reinstalled VSTHOST asio all virtual audio cable as well as live professor none of that has brought functionality back i've been talking to the person on the live professor forum but i was told there wouldnt be any help for portcls sys crashing the conversation is somewhat long but it can be read here ifoundasound user forum - asio all virtual audio cable no audio i've done everything i could to get functionality back except for erasing the hard drive and reinstalling the operating system but i have a problem with reinstalling the operating system because it hasnt been on the hard drive for a whole year yet i've got a bunch of photos and text files that i need to organize and my life is in disarray already as it is and i'm only looking forward to organizing all of that much less than getting in there to clean plus i've got some various programs that linger and need organized it something i want to take in small steps well what brings me here i am hoping somebody can tell me something about the BSOD that changed all the functionality it looks like VSTHOST and live professor use the same DLL file and that file has been changed causing both programs to not work now that asio all is refusing to cooperate i mean so... Read more

A:portcls BSOD with three audio programs open

There is no dump file in the attachment so unfortunately we cant tell you anything without that

http://www.sevenforums.com/bsod-help-support/251304-portcls-bsod-three-audio-programs-open.html
Relevancy 60.2%

WinXP Frequent BSoD due to basically i ve been recently getting a lot of Blue Screens some of them just says quot BAD POOL HEADER quot and then there s others that say NON PAGED quot and it s in result of quot ati cqag dll ati dvag dll ati duag dll portcls sys i ve so far updated my Video Card driver Radeon mb also my intergrated sound card also updated the nVidia stuff that came with the mother board like the by BSoD ati portcls. other lots also and of caused DLL's ati2cqag.dll network Card so i m reall ynot sure whtas happening i ve got a bunch of mini dump files not even sure which is lots of BSoD caused by ati2cqag.dll and other ati DLL's also portcls. which anymore since it just keeps crashing also this is kinda weird when i m wathcing anime and stuff on RealOne Player it sometimes jsut fast fowards automatically so i ll attach the minidumps D help if anyone can it s getting to be really bothersome having my computer die on me when i m doing research for school or just chatting in Ragnarok Online oh also i just reformatted last friday so yea dunno if that afects anything dead nbsp

A:lots of BSoD caused by ati2cqag.dll and other ati DLL's also portcls.

Same issue... HELP, PLEASE!

I, too, have had many many many random reboots or BSOD and they are driving me crazy. A lot of them list the same issues/errors as the post above. I've lost a great deal of man-hours, as well as blank cd's & DVD's. I've read through the forum and have noticed cpc2004 can read through/process dumps so I have attached some. Any help would be appreciated!

THX

P4 3.4GHz (watercooled)
Gigabyte 8KNXP 1.0 with latest BIOS
AIW Radeon 9800
SB Audigy2
2x 250GB hd's
1x 74GB raptor boot drive
Plextor PX-716A DVD-RW
Kenwook True-x drive
Enermax 550W Powersupply
 

http://www.techspot.com/community/topics/lots-of-bsod-caused-by-ati2cqag-dll-and-other-ati-dlls-also-portcls.34109/
Relevancy 59.77%

So here is the issue, ever since I built my computer I have had nothing but trouble with the Chinese crap sound card, also known as VIA. I have re-installed drivers countless times and ran countless diagnostic tools and other thing to no avail. Every time I open Volume Manager I get a portcls.sys BSOD. This is making it so I can't use my microphone on Skype, even though I set my microphone as default. Headset usually works after opening the audiodeck in VIA and resetting my headset. Is there any way to remedy this BSOD?
Specs:

Z77 Gigabyte motherboard
Intel 3570k CPU
8 GB Corsair Vengeance
VIA HD Audio

A:BSOD when opening Volume Manager - portcls.sys error

Hello and welcome simple answer theman get yourself a new card mate I use Asus Xonar DG's in all my machines and never have had so much as sniff of problems.

Maybe this Chinese brand card has got software that is incompatible with your system or it is loaded with whatever.

http://www.asus.com/Sound_Cards_and_DigitaltoAnalog_Converters/Xonar_DG/ this is the base version and I find more than capable of driving my 5:1 system and if necessary a 7:1 system and for $30 a no brainer. Pity to spoil what looks to be a decent set up for a lousy sound card

Newegg.com - asus Xonar DG

http://www.sevenforums.com/bsod-help-support/311638-bsod-when-opening-volume-manager-portcls-sys-error.html
Relevancy 59.77%

Intermittant BSOD on shutdown with auto-restart. BlueScreenView seems to flag ntoskrnl.exe & portcls.sys. I am uncertain how to deal with this.

A:Intermitant BSOD on shutdown w autorestart. ntoskrnl.exe? portcls.sys?

  
Quote: Originally Posted by slowrobert


Intermittant BSOD on shutdown with auto-restart. BlueScreenView seems to flag ntoskrnl.exe & portcls.sys. I am uncertain how to deal with this.


Hello slowrobert.

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.



Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/275373-intermitant-bsod-shutdown-w-autorestart-ntoskrnl-exe-portcls-sys.html
Relevancy 58.91%

Hello to all, this is my first post on sevenfourms so please excuse me if I do not follow every guideline of this forum, I'm still going through all the stickyd posts. I've been having an issue with my computer bsoding while torrenting and attempting to install some programs. I'll get an error warning sometimes stating the hard drive cannot be written to, would I like to retry, ignore, or abort and after that it will BSOD. Attached is my DM Log zip. I appreciate any and all help with these issues. One other problem I'm having is that my computer will not stay in sleep/hibernate mode, it will go into the mode then turn right back on. I'm assuming it may have something to do with my motherboard c-states but I'm not sure exactly what to do to get it functioning properly.

A:BSOD Portcls.sys & Neito.sys General issue resolution/cleanup

How did you activate your copy of windows?

http://www.sevenforums.com/bsod-help-support/364249-bsod-portcls-sys-neito-sys-general-issue-resolution-cleanup.html
Relevancy 58.91%

Hello I had a Norton popup that it had detected a threat and blocked it I ran a full scan with Malware bytes Norton and a few things reboot (before Repeated (audiodg.exe) login) portcls.sys BSOD 0xD6 on were cleaned up Then I started getting some random BSODs I then activated Driver Verifier and the BSODs now occur without fail on reboot prior to he login I am running Win Ult x with gb RAM I started anaylzying the minidumps and Repeated BSOD on reboot (before login) 0xD6 portcls.sys (audiodg.exe) have attached the results here I suspected that whatever triggered the Norton alert and then got cleaned up probably had messed up something I ran SFC scannow but it checked out OK I ran memtest for hours and it found error bit on one slot that it indicated was ECC correctable I swap SDRAM strips around and in and out anyways but BSOD was always the same at reboot Runs fine in Safe Mode s I did chkdsk R c - all OK I updated all drivers on my Gigabyte P -UD P latest bios I disabled the onboard Intel HD audio still BSOD I ran Avast boottime full scan and it found some things and cleaned but still the same BSOD at bootup Could be hardware but I kind of doubt it I also reset all BIOS setting to factory defaults I did not try to reseat swap the CMOS battery I did remove all USB and audio cable attachments I also ran Startup Repair and it found no problems The WinDbg results attached are labelled by the minidump dates The ones on are BEFORE Driver Verifier was turned up on ALL drivers The two from are with Driver Verifier which pointed me to portcls sys called in audiodg exe with the quot attempting to access memory beyond the end of the allocation quot on the BSOD Any thoughts before I wipe and reinstall I am stumped I might also try booting Fedora or Knoppix Linux LiveCD and see if it has any problems which would then imply faulty hardware Many thanks in advance Mark

A:Repeated BSOD on reboot (before login) 0xD6 portcls.sys (audiodg.exe)

I forgot to upload my attachments before submitting the first time. Oops.

http://www.sevenforums.com/bsod-help-support/188058-repeated-bsod-reboot-before-login-0xd6-portcls-sys-audiodg-exe.html
Relevancy 49.45%

does anyone know anything about the panasonic dmc-f1 (also called dmc-fx1)? does anyone own one (or know anyone who does)?
 

Relevancy 47.3%

i have getting a blue screen error which refers to a 0xd1 stop error .
this bsod is related to portcls.sys.
i am using xp sp2.
can i get any Microsoft's hot fix for this error?
is updating to sp3 may fix this problem?

A:Hotfix for portcls.sys

You should likely install SP3 anyway.

Aside from that, that file is audio related. Download and install the latest audio drivers for your motherboard/soundcard.

http://www.techsupportforum.com/forums/f10/hotfix-for-portcls-sys-377327.html
Relevancy 47.3%

got a damn problem on my laptop HP
Processor: 2.66ghz
RAM: 448 DDR SDRAM
Video Card: 68 SDRAM ATI RADEON
Everytime I start a video game and winamp...

the computer shows BSOD:
IRQL_NOT_LESS_OR_EQUAL

I think its physical but not sure.... is there anythin I could do to remove that BSOD plz.....

I gonna try tonite updatin my video card but its already the latest drivers

Ill try to turn up my voltage memory a bit.... it might work ... hopefully!!!
Anyway thx
 

Relevancy 47.3%

I have been receiving BSOD's for a few months. The only happen when I am playing the Windows XP Pro version of Spider Solitaire. The guilty party checks out always to be: IMAGE_NAME: portcls.sys. I have tried Microsofts patches and verified every single driver to be up to date - as well as having everything else squeaky clean as far as spyware and antiviruses are concerned. What information do I need to provide, i.e., minidump analysis, etc., attached, for someone to advise me how to proceed. I am hoping it might be as simple as downloading a portcls.sys file and replacing the one currently installed.

http://www.techsupportforum.com/forums/f10/image_name-portcls-sys-214547.html
Relevancy 46.87%

I have been receiving BSOD s for a few months The only happen when I am playing the Windows XP Pro version of Spider Solitaire The guilty party checks out always to be IMAGE NAME portcls sys I have tried Microsofts patches and verified every single driver to be up to date - as well as having everything else squeaky clean as far as spyware and antiviruses are concerned What information do I need to provide i e minidump analysis etc included below for someone to advise me how to proceed I am hoping it might be as simple as downloading a portcls sys file and crashes causing portcls.sys replacing the one currently installed Microsoft R Windows Debugger Version X Copyright c Microsoft Corporation All rights reserved Loading portcls.sys causing crashes Dump File C WINDOWS Minidump Mini - dmp Mini Kernel Dump portcls.sys causing crashes File Only registers and stack trace are available Symbol search path is http msdl Microsoft Com download symbols Executable search path is Windows XP Kernel Version Service Pack MP procs Free x compatible Product WinNt suite TerminalServer SingleUserTS Built by xpsp sp gdr - Kernel base x d PsLoadedModuleList x c Debug session time Wed Jan GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Unable to load image sthda sys Win error n WARNING Unable to verify timestamp for sthda sys ERROR Module load completed but symbols could not be loaded for sthda sys ERROR FindPlugIns b Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck D portcls.sys causing crashes c ee ea Probably caused by portcls sys portcls CPortWaveCyclic Notify b Followup MachineOwner --------- kd gt analyze -v ERROR FindPlugIns b Bugcheck Analysis DRIVER IRQL NOT LESS OR EQUAL d An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If kernel debugger is available get stack backtrace Arguments Arg c memory referenced Arg IRQL Arg value read operation write operation Arg ee ea address which referenced memory Debugging Details ------------------ READ ADDRESS c CURRENT IRQL FAULTING IP portcls CPortWaveCyclic Notify b ee ea ff c call dword ptr ecx Ch CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT BUGCHECK STR xD PROCESS NAME Idle LAST CONTROL TRANSFER from ee edb to ee ea STACK TEXT bc ee edb f b df ef ee d portcls CPortWaveCyclic Notify xb WARNING Stack unwind information not available Following frames may be wrong fc b a ffdff c ffdff sthda xeedb bf b a da nt KiTimerExpiration xb ae ffdffc ae nt KiRetireDpcList x fa e nt KiIdleThread e nt KiIdleLoop x STACK COMMAND kb FOLLOWUP IP portcls CPortWaveCyclic Notify b ee ea ff c call dword ptr ecx Ch SYMBOL STACK INDEX SYMBOL NAME portcls CPortWaveCyclic Notify b FOLLOWUP NAME MachineOwner MODULE NAME portcls IMAGE NAME portcls sys DEBUG FLR IMAGE TIMESTAMP b fe FAILURE BUCKET ID xD portcls CPortWaveCyclic Notify b BUCKET ID xD portcls CPortWaveCyclic Notify b Followup MachineOwner nbsp

https://forums.techguy.org/threads/portcls-sys-causing-crashes.675529/
Relevancy 46.44%

Recently I been having multiple Bsods on a daily basis they can occur whenever but most of the time they occur wehn using online applications.
Example of when portcls.sys Bsods occur:
On skype calls
When creating a party on Neverwinter beta
When trying to play Arma 3 alpha online
Speratically on Legue of legends

Kernal Bsods occur Multiple tmes a day without addtionla applications being launched, please see attached .dmp files.
Any help would be appreciated
Thanks, Zantier

A:Portcls.sys and Kernal mode Bsods

Code:
BugCheck D6, {fffff98006551018, 0, fffff88004c73b15, 0}

*** WARNING: Unable to verify timestamp for vrtaucbl.sys
*** ERROR: Module load completed but symbols could not be loaded for vrtaucbl.sys

Could not read faulting driver name
Probably caused by : portcls.sys ( portcls!GetMaxMapRegisters+5 )

Code:
Usual causes: Device driver
This is an interesting bugcheck, since I have never analyzed one with this particular stop code, although it appears that a driver has referenced address space outside of it's current pool allocation. It appears that a Windows Port class driver (driver for port devices) was reading the referenced memory address (if I'm right).

Anyhow, the guilty driver is most likely, the Virtual Audio Cable driver, I would suggest finding an update from their support page, which can be found here:Ventrilo - Download
If that doesn't make a difference, then please remove the associated program with Revo Uninstaller Pro - Uninstall Software, Remove Programs easily, Forced Uninstall, Leftovers Uninstaller


Code:
6: kd> lmvm vrtaucbl
start end module name
fffff880`04c62000 fffff880`04c70a00 vrtaucbl T (no symbols)
Loaded symbol image file: vrtaucbl.sys
Image path: \SystemRoot\system32\DRIVERS\vrtaucbl.sys
Image name: vrtaucbl.sys
Timestamp: Mon Feb 15 17:07:10 2010 (4B797F3E)
CheckSum: 0001BBDF
ImageSize: 0000EA00
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Remove (suggested):


Code:
Pando Media Booster c:\program files (x86)\pando networks\media booster\pmb.exe
Read this thread for information:ISP or Networking Issue? 30 days old and counting problem..
I also noticed you don't appear to have any active anti-virus protection:

Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware


   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Good and Free system security combination.

http://www.sevenforums.com/bsod-help-support/289845-portcls-sys-kernal-mode-bsods.html
Relevancy 46.44%

I've received this multiple times now, and in some cases I suspect it's caused reboots when I've been away from my PC. A bit of a head scratcher for me as this error was associated with an old Windows update, however that old issue has long since been fixed by MS.

I'm sitting on updating to Windows 10 anyways but thought I would post here because I'm always curious and like to know what's going on. Thanks in advance for the assistance.

LOGUN-2015-07-01_103350_77.zip

A:System Service Exception PORTCLS.SYS

Some drivers are out to date.
Maybe CPU overclocked, could cause bluescreens.

I'll post details when I'm home.

http://www.eightforums.com/bsod-crashes-debugging/68339-system-service-exception-portcls-sys.html
Relevancy 45.58%

Hey I am new here so I will try and keep this as concise as possible I get the BSOD seen in the title on this PC at random intervals but usually once or twice per fortnight This might be while gaming web browsing or doing anything normal I followed this thread for analysing dump files I have retained I believe these are full memory dumps I found that nvlddmkm might be causing the issue paged fault in non area (portcls.sys) Page however I wasn't totally convinced it was the nvidia drivers at fault as this was a fresh Win install about a month or two ago I have followed the BSOD posting instructions to generate the zip with the logs etc in it however the tool doesn't seem to like making the zip when it includes the large dump files I checked above as the zip ends up being empty I can only run it successfully if I just leave in the smaller dumps from C windows minidump I will attach Page fault in non paged area (portcls.sys) the one it can make and can attach another zip with the larger dumps in if needed This Page fault in non paged area (portcls.sys) extra Page fault in non paged area (portcls.sys) zip would be over MB so not sure if that would be allowed or even needed Thanks in advance

A:Page fault in non paged area (portcls.sys)

If you uninstall Virtual Audio Cable by EuMus Design, what happens? Check it and let us know.

Not suggesting for an update because I am not seeing a driver for it that is compatible with Windows 10.
________________________________________________________________________

Code:
BugCheck 50, {ffffe0006a15c008, 0, fffff801a0c080bd, 0}

*** WARNING: Unable to verify timestamp for vrtaucbl.sys
*** ERROR: Module load completed but symbols could not be loaded for vrtaucbl.sys

Could not read faulting driver name
Probably caused by : portcls.sys ( portcls!GetMaxMapRegisters+5 )

Followup: MachineOwner
---------


Code:
Image name: vrtaucbl.sys
Timestamp: Sun Apr 01 14:38:53 2012 (4F781B25)

http://www.tenforums.com/bsod-crashes-debugging/56437-page-fault-non-paged-area-portcls-sys.html
Relevancy 45.15%

blue screen error portcls.sys adress a9ba6647
it pop ups after windows xp pro comes out
 

https://forums.techguy.org/threads/blue-screen-error-portcls-sys-adress-a9ba6647.630235/
Relevancy 45.15%

I can t seem to figure out why my dell dimension has no sound Controller and Multimedia BSODeath Audio portcls.sys error the In my device manager it shows a yellow question mark next to the multimedia audio controller And upon startup windows sees that it recognizes the Realtek Audio A device and tries to install drivers At the end of the installation the computer goes to the Blue Screen of DEATH and says portcls sys error Must reboot etc and the computer does not load driver I ve tried updating ALL Dell drivers for this computer Ive tried handfuls of different drivers all of which do the same exact thing The sound card is connected to the computer s motherboard as far as i know in these machines Do i need to just install a new separate card Please help i ve tried everything Here is a list of the computer BIOS BIOS Date BIOS Type Phoenix ROM BIOS PLUS Version A BIOS ID Dell N BIOS Version A OEM Sign-On None Chipset Intel rev Superio Unknown OS WinXP SP CPU Pentium Mhz MAX Mhz BIOS ROM In Socket No BIOS ROM Size K Memory Installed MB Memory Maximum MB Memory Slot MB Memory Slot MB ACPI Revision nbsp

A:Multimedia Audio Controller error and the portcls.sys BSODeath

If all else fails a new card may the best if not simplest solution (btw.. i've seen some very cheap usb sound cards if you just want basic sound. try googling them)

Here's something else to try (just as a shot in dark) as i've seen anti-malware interfere with installations and cause BSODs before. (tho never for the Realtek AC97 driver but hey, is worth a try)

> Look in Add/Remove programs. Look if any Realtek sound entry there and uninstall there first then uninstall driver if found in Device Manager
> Unplug your internet connection
> Now check all your anti-malware tools (firewall, A/V, spyware check, etc) and disable any and all real time protection feature for each
> Try reinstalling Realtek

Good luck!
 

http://www.techspot.com/community/topics/multimedia-audio-controller-error-and-the-portcls-sys-bsodeath.143638/
Relevancy 45.15%

blue screen error portcls.sys adress a9ba6647
it pop ups after windows xp pro comes out

A:blue screen error portcls.sys adress a9ba6647

you need to post the full error message
is it the same in safe mode

http://www.techsupportforum.com/forums/f10/blue-screen-error-portcls-sys-adress-a9ba6647-184462.html
Relevancy 39.99%

I wanted to ask a question of how to look for an upgrade fro ram on a panasonic tough book Cf-25. I would like to upgrade to windows XP but from what I understand the minimum requirements are at least 128megs of ram. I have spent a couple of hours on search engines trying to find a proper upgrade. They talk about a 64x1 is that the best I can do? I am not the literate on this topic I work as a sous chef in a hotel so I hope I'm not stating the obvious. I am strarting aside business with a friend and wanted to use the computer for on the road sales eventually adding a mobile printer. Thanks for any help
Jack
 

A:Panasonic CF-25

If I recall, the CF 25 uses a 133 MHz pentium 1.

If that is correct, then thats a long way below the minimum CPU specs required (to be useable at all it needs to be 450 MHz, even though Microsoft claim it will run on a 300 MHz chip) for XP.

Thats not going to be upgradeable, so don't get too hopeful about running XP.
 

https://forums.techguy.org/threads/panasonic-cf-25.316764/
Relevancy 39.56%

My camcorder appears to record etc., as you can see the stuff you are recording on the screen but when you go to play it back it will not read the dvd. A friend says the pick up lens is not moving freely. The eye? I have no idea what he means. All I know as that it does not recognize the dvd even to finalize it. Anybody have any suggestions? Please?
 

https://forums.techguy.org/threads/can-anyone-help-with-a-panasonic-vdr-d50-camcorder-please.747641/
Relevancy 39.56%

I have a new Laptop with Win 7 Ultimate. I cannot find any Driver for my Multi-Function Station Panasonic KX FLB751 for Win7 at the Internet. Does anybody knows a solution for that.

A:Win 7 Driver for Panasonic

Try here :
 
http://shop.panasonic.com/shop/model/KX-FLB751?t=downloads&support
 
Remember - Google is usually your friend !
 
Chris Cosgrove

http://www.bleepingcomputer.com/forums/t/515184/win-7-driver-for-panasonic/
Relevancy 39.56%

Hi, everyone - nice to be back..............
I have one or two problems with my Panasonic camcorder on my new HP laptop operating on Windows 7.

I was able to use either the installed movie maker on my old XP computer or the Panasonic software supplied on disc with the camcorder.

I'm not very happy with the Windows 7 movie maker replacement, nor the Roxio software which is installed and which keeps cutting itself off for no apparent reason about 5 minutes into the download.

But most important is the reaction to my attempts to re-install my Panasonic software disc. I keep getting an error message, which I neither understand nor do I have any idea what to do with it. I can't get the attached screenshot to open but the error message reads:-
! Error executing file.
E:\MDVS\Setup\Setup.exe
The requested operation requires elevation

Can anyone out there help with any of these issues?
Yours,
Selwyn.
 

Relevancy 39.56%

I HAVE A PANASONIC TOUGHBOOK CF-72 LAPTOP 850 MHZ P3 . DOES ANY ONE KNOW HOW THE GSM ON THIS SYSTEM WORK . DO I NEED A GSM CELLULAR CHIP OR A DRIVER. PLEASE LET ME KNOW OR DIRECT ME TO SOMEONE WHO KNOW HOW THEY WORK. MY EMAIL [email protected] THIS LAPTOP HAS A CELL PHONE ANTENA BUILT INTO THE LAPTOP AND A BOTTON ON THE SIDE THAT ACTIVATES IT
 

https://forums.techguy.org/threads/panasonic-toughbook-cf-72.643416/
Relevancy 39.56%

Does anyone use the Panasonic Broadband Router? I have tried everything I know to do to get it to work with WinMx. I use XP but the firewall is turned off. I have mapped the ports and entered that info in the setup of WinMx. No luck. Can anyone help?

Thanks,
Tony
 

A:Panasonic Router

Hiya and welcome

What is the full version of the router? There are a few FAQ's jotted about the Web, so may take some searching.

Regards

eddie
 

https://forums.techguy.org/threads/panasonic-router.85801/
Relevancy 39.56%

Hello i would like to know if there is anyone that could tell me how to fix the following problem.

My LCD screen on my P3 CF-72 has a line across the screen, at first i though it was dead pixels but then it moved.

Bad connection maybe? Thanks for any help- if you need anymore detail i will post later, i am in a rush now.
 

A:Panasonic CF-72 LCD Problem

It could be interference, but its more likely that you are trying to use a screen resolution or refresh rate that isn't fully supported by your flat panel.
You will need to read its manual and adjust your resolution according to what it says.
 

http://www.techspot.com/community/topics/panasonic-cf-72-lcd-problem.58733/
Relevancy 39.56%

I have a Panasonic Palm Cam model PV-SD4090. The last time I turned it on, it sounded like it couldnt read the disk. It just sounds like it was "cycling" trying to read the disk, even when it was turned OFF. I finally got the diskette out. It is a disk mentioned in the SUBECT line. Obviously the camera needs repair, but that does not make monetary sense, since newer cameras are much smaller and cheaper. I got a new one for Christmas (Kodak Easy Share C433). Any help would be appreciated.
 

A:Panasonic Superdisk 120 MB

speedbump1100 said:

I have a Panasonic Palm Cam model PV-SD4090. The last time I turned it on, it sounded like it couldnt read the disk. It just sounds like it was "cycling" trying to read the disk, even when it was turned OFF. I finally got the diskette out. It is a disk mentioned in the SUBECT line. Obviously the camera needs repair, but that does not make monetary sense, since newer cameras are much smaller and cheaper. I got a new one for Christmas (Kodak Easy Share C433). Any help would be appreciated.Click to expand...
 

https://forums.techguy.org/threads/panasonic-superdisk-120-mb.531222/
Relevancy 39.56%

Does anyone know if this camcorder is good for everyday basic video taking? If not can you please tell me your opinion if it is under $300.00.

Thank you for your time!
 

https://forums.techguy.org/threads/panasonic-vdr-d210.598344/
Relevancy 39.56%

Hi, I have the above mention camera. I want to take pictures of my kids at night at a fountain with lights under the shooting water. ( i will attach a picture) BUT I don't know the correct setting. We went the other night and my pictures are terrible. Any help would be great!
 

A:Panasonic DMC-FZ30

The fountain was moving, the kids were moving and the camera was moving-all in a night shot that requires the lense to remain open for considerable time, and also the backlighting places everyone in shadow. Worst of all conditions. I can think of no way to get that shot unless the fountain is taken seperatly and the kids are superimposed from a seperate shot taken in daytime.
 

https://forums.techguy.org/threads/panasonic-dmc-fz30.634656/
Relevancy 39.56%

We are trying to stream do 170 Panasonic How a use HPX as I webcam? my live video to a member subscription site It s a short show stream The trick is that we want to be able to do this using an HD video camera that gives us greater How do I use my Panasonic HPX 170 as a webcam? flexibility to record the show in HD as it streams as well as offers the advantages of a professional camera things How do I use my Panasonic HPX 170 as a webcam? like remote control operation high quality auto focus manual white balance external shotgun mic etc We have done this in the past using a pinnacle analog capture card in a Windows XP system However the system was old and unstable and we need to move our operation to our new Windows bit system We ve been unable to find a solution for this We tried putting the card in the new computer but the cam How do I use my Panasonic HPX 170 as a webcam? platform which recognized the video signal when the Pinnacle card was in the XP system will not recognize the signal in the Windows system Does anyone have any experience with this sort of thing nbsp

A:How do I use my Panasonic HPX 170 as a webcam?

have you got the updated w7 driver for that cam?
 

https://forums.techguy.org/threads/how-do-i-use-my-panasonic-hpx-170-as-a-webcam.1095868/
Relevancy 39.56%

hi all.

im looking for panasonic kx-p1121 win 7 driver.

its connected to my pc using LPT printer port.

please help

A:Panasonic Dot Matrix

Here are the drivers...
Go Printers-Add new printer-Have disk-Go to extracted folder-Select the inf file-Choose your model and install

Happy printing

http://www.sevenforums.com/drivers/21749-panasonic-dot-matrix.html
Relevancy 39.56%

Hi,

I have a panasonic NV-GS230 video camera. When i connect it to W7/32 bit i only have the webcam. I'm unable to upload my video's from the camera to W7.

When i tried installing the usb drivers i've got the message that they aren't supported in W7. I contacted panasonic about this and they told me i have an unsupported camera (which is only 2 years old).

I now tried installing the USB drivers in the Win XP Mode. But now I get an error that my computer doens't have any supported USB 2.0 ports.

Anyone any idea how to fix this.

A:Panasonic NV-GS230

hi baldeagle , download the vista drivers for your camera and run them in compat mode ,run them as administrator , the vista drivers are more compatible than the XP ones

http://www.sevenforums.com/drivers/75447-panasonic-nv-gs230.html
Relevancy 39.56%

I just bought a Panasonic PV-L453 VHS C camcorder with a built in still camera. I got a new Panasonic 64MB SD card for it, and whenever i put it on photo mode with the card in it, it says it is write protected whether the switch on the card is in the lock position or not. It did the same thing with another 128MB card made by simpletech. I'd appreciate any ideas on how to fix this. Thanks.
 

A:Panasonic VHS C still camera

are you sure that the camcorder will accept cards that large? are you able to go into card setup and format the card?
 

https://forums.techguy.org/threads/panasonic-vhs-c-still-camera.173146/
Relevancy 39.56%

My wife has an old Panasonic VS6 mobile phone. The Panasonic Handset Manager Software used to work with XP but doesn't load with Windows 8. Is there any free compatible handset software that might work?

http://www.eightforums.com/software-apps/22778-panasonic-vs6-phone.html
Relevancy 39.56%

Hey all,

Does anybody out here have an industrial grade Panasonic Toughbook? If so, how do you get a commercial toughbook for non-commercial purposes?
 

A:Panasonic toughbooks?

Panasonic won't let you buy one?
 

https://forums.techguy.org/threads/panasonic-toughbooks.616050/
Relevancy 39.56%

Hi all. I just aquired a Panasonic Toughbook model cf-37. It is older but the price was right (free) so I jumped on it. It has a DVD drive on it and I am unsure how to use it. the DVD is model # cf-vdd372.

The manual was talking about requiring some kind of card to play dvds? I am totally stupid when it comes to things like this, so if anyone would, please walk me through getting this thing hooked up.

Thanks.

Rob Oneal
 

A:Panasonic Laptop DVD

Can you clarify exactly what type of card your manual speaks of - this is not normally the case.
Have you tried watching a DVD on it yet? I'm assuming that the previous owner plugged the drive in and used it at some point? Generally, if a computer comes with a DVD Rom drive then it generally has some software enabling the viewing of DVD's.
The drive should work anyway with DVD's that have content other than DVD video, (data, pics, music etc. - DVD's aren't only about films) But to watch DVD films then you would normally require some software to view them with or a standalone codec (another type of software) to enable already installed media players (windows media player for example) to play the films.
Try a DVD Film - what happens if anything?
 

https://forums.techguy.org/threads/panasonic-laptop-dvd.387528/
Relevancy 39.56%

Gentlemen I have apparently discovered the sole incarnation of a mobius strip in software from I have a Panasonic Toughbook CF- that needs a OS change My local IM geeks wiped everything from it because it was quot no longer network compatible quot Here s my problem It OS? install CF-27..how Panasonic new to could be a nice toss-around PC for field work if it had an OS however it no longer does Here s the never ending problem It has a removeable FDD bay and CD drive and Floppy Both will not fit at once and ME and XP will not allow me to make the C drive a bootable drive Therefore I cannot boot with a boot disk and run setup from the CD Confused So am I Anyone have any idea how to put a modern OS on a laptop with one drive capability By the way I actually thought that ME was bootable but it doesn t act like it Is it supposed to be Thanks I need to go iron my pocket Panasonic CF-27..how to install new OS? protecter now nbsp

A:Panasonic CF-27..how to install new OS?

start with the floppy drive and use the fdisk utility.. then reboot and format c: after format is complete copy the bootdisk to the hard drive. this should enable you to then attach the cd and install os.
 

https://forums.techguy.org/threads/panasonic-cf-27-how-to-install-new-os.165552/
Relevancy 39.56%

Hi,

I am installed panasonic multifunctional in windows 7. Model KX-FLB800/KX-FLM650.

Driver does not support.

In driver CD support upto Windows XP. How to installed panasonic multifunctional in Windows 7.

Regards,
rajgan

A:Panasonic Driver

Welcome

Install in xp compatiblity mode

Save driver to desktop.
Right click the driver and select propertie/compatiblity. Make the proper selections
Click OK
Right click and run as administrator

http://www.sevenforums.com/drivers/125114-panasonic-driver.html
Relevancy 39.56%

I ve just been given a Lumix G Naturally the accompanying manual hardly helps with any of the functions so I uploaded the pdf manual - G3 lumix panasonic all pages of it I ve printed out panasonic lumix G3 some of the pages which seem to be the most relevant but since there s no search facility I may have missed some crucial explanation My real problem is I only know how to take a basic picture on the camera and even when trying to follow the instructions I find they aren t detailed enough I don t know how to zoom in other than twisting the lens which has a very limited action and I don t know how to turn on flash Plus lots of other things The other problem is that my eyesight isn t good so trying to see what the icons are in the so called manual is next to impossible Does anyone know if there s an easier more explanatory manual available I ve Googled it but come up with nothing nbsp

Relevancy 39.56%

i am trying to install an os on a toughbook with a backpack....the system boots but then goes to a screen indicating to install a boot floppy & press f1, if a do this my drivers are not present for the backpack so i get an "a" prompt, i try to install the drivers but it isnt showing the hd????? i'm lost .......i cant find a "detect a hd mode anywhere ..can anybody help
 

Relevancy 39.56%

i have a really old panasonic toughbook with windows xp on it heres the problem:
when i go to my computer it says that my total space on my c drive is 18.6 mb but when i go to my computer it says that microsoft office takes up like 74 mb hows that possible?
also when i try to remove the program i get this error message C\WINDOWS\SYSTEM32\AUTOEXEC.NT The systenm file is not suitable for running MS-DOS and Microsoft Windows applications. close or ignore but when i press ignore it closes it anyways can anyone help?
 

Relevancy 39.56%

I have a 52" DLP tv as a second monitor attached through pc-vga port. It looks great, it's just that is has flickering, does anyone know if there is a way to get rid of the flickering or atleast reduce it. My graphics card is a Nvidia GeForce 7300 GT. i have it installed on Vista Home.
 

A:Panasonic Tv as second monitor

Check the refresh rate you're using, perhaps changing it might help.

I connected my 50" plasma to my new laptop using the HDMI connection, and it was rock-steady. I also tried the VGA connector, and that appeared to be fine too.
 

https://forums.techguy.org/threads/panasonic-tv-as-second-monitor.573810/
Relevancy 39.56%

My boss uses a Panasonic Quiet KX-P2124 DM printer (ancient!!) and the Out of Paper light is blinking, but it has paper. I don't know much about dot matrix printers. Can anyone help?
Thanx
 

Relevancy 39.56%

Hi i am about to buy a Panasonic DMC FX 77 compact which has a touch screen .. ive never had a touch screen before and would appreciate any comments regarding the benifits or even draw backs of a touch screen and wether im doing the right thing .. its a big touch screen on the FX 77 and vitually fills the entire camera back .. thanks for your help and comments .. Michael
 

A:FX 77 touchscreen < Panasonic >

I didnt even know touch screen cameras were avalible. I would suggest you go try it out in a store setting. If it is really compact I can see big fingers being an issues- as they can be with smartphone keyboards. Otherwise at this point I wouldn't sink much money into a digital camera seeing they are dirt cheap these days. the next technology is the consumer friend dSLRs which are more compact than a traditional SLR. but they have interchangeable lenses. I'd be looking for them to drop in the next couple years.
 

https://forums.techguy.org/threads/fx-77-touchscreen-panasonic.1002491/
Relevancy 39.13%

I can capture vhs tapes and make a mpg file on my hard disk. Once it is a mpg file, I can import in into Pinnacle Studio 10.8. I have on my motherboard firewire input/output capability but even though it sees my Panasonic dvr, I get the yellow "i" and it it is looking for a driver which Panasonic doesn't supply. I prefer using my external dvr recorder not my internal dvd writer because on this Panasonic DMR-ES25, I have the ability of getting almost dcvd quality in 4 hr. mode and I would like to combine many vhs tapes to make 8 gb files before burning.

Any suggestions will be appreciated.

http://www.techsupportforum.com/forums/f10/what-software-program-will-see-my-panasonic-dvr-342101.html
Relevancy 39.13%

printer/photocopier.

Friend has put W7 HP on his Office PC but now can't find a driver for his MFP , a Panasonic DP-1510P?

A:Need W7 driver for Panasonic DP-1510P..

here is the link to the drivers, they are only xp/me/2000 drivers Panasonic @ Work Drivers (DP-1510P-PA - 15cpm Dig.Copier Printer Scan) - Panasonic Australia they may not work with win 7 try them in compatibility mode

http://www.sevenforums.com/drivers/70187-need-w7-driver-panasonic-dp-1510p.html
Relevancy 39.13%

i need Panasonic Dp-1510 p Driver For win7
i use LPT1 caple
but it's not in Add printers List ?? what can i do?

A:need Panasonic Dp-1510 p For win7

Try here:
Panasonic @ Work Drivers (DP-1510P-PA - 15cpm Dig.Copier Printer Scan) - Panasonic Australia

Driver Install - Add Printer Wizard

http://www.sevenforums.com/drivers/101427-need-panasonic-dp-1510-p-win7.html
Relevancy 39.13%

I have a camera that has been having SD card problems. Sometimes when I put a card in, it says "insert SD card again". I reinsert it until it says "try another card. If I push it back and forth in the slot, it will sometimes work.
 

Relevancy 39.13%

When I download movies taken on my Panasonic DMC-TZ4, the file extension is .MOV. According to the camera manual and your FAQs QuickTime should be able to play this type of file. But, when I try I just get weird colored patterns (the audio works). I updated my QuickTime to the latest version. Any advice?
 

Relevancy 39.13%

I made a short 17 with my handheld Panasonic video camera and when I connect it to my laptop, I can't open the AVCHD file??? I need to copy it to a CD and I'm under a time sensitive deadline. Can anyone help me?
 

https://forums.techguy.org/threads/panasonic-hdc-tm40-problem.1166017/
Relevancy 39.13%

Hi

I recently bought a Panasonic TV with a mirroring capacity. However, although my laptop tries to connect to it, there is no joy. They are connected via a BT Home Hub network. When I spoke to Panasonic support, they told me that I needed some software for Windows 10 that would make the laptop suitable for mirroring. Does anyone know what the software is, and where I can download it? Many thanks in advance!

http://www.tenforums.com/graphic-cards/55242-mirroring-problems-panasonic-tv.html
Relevancy 39.13%

Our problem is we have a Panasonic KXL-807A external CDrom to hook up to a Toshiba Portage 7020 running Windows XP Professional with a FAT32 file system. This is not on an internet connection. All indications show the drivers for this product are not compatible with XP, but the wealth of collective information on this site has proven my indications wrong on many occasions. Can anyone point us toward some drivers that might work with this device?
Thank you
 

https://forums.techguy.org/threads/panasonic-kxl-807a-with-windows-xp.401060/
Relevancy 39.13%

Below is what i see in my browser network page and what i see on my network map.
The tv(Panasonic viera) connects both wireless and via ethernet to the internet.
The tv sees the media player but when opened there are no files to play?
The technicolour is the router which is what the tv says is the media player?
The media is set to allow media streaming and the network drive is open.
Can someone please tell me what im doing wrong?

A:panasonic tv-cant see media from network

and i get this when i try play too

http://www.sevenforums.com/network-sharing/291390-panasonic-tv-cant-see-media-network.html
Relevancy 39.13%

My computer will not let me change the printer to online, it will not print at all at this point, not even saved documents, please help
 

A:Panasonic DP-C262 offline

in printer properties check it is listed on the correct port
 

https://forums.techguy.org/threads/panasonic-dp-c262-offline.1091799/
Relevancy 39.13%

I just bought a working Panasonic CF25 ToughBook at a yardsale for $20!!! The battery is no good but it works fine with the AC adaptor, it has win98 installed, the bad thing is it only has a 800mb harddrive in it and I want to use it to store and review Digital pictures when I go on trips, what kind of harddrive will fit this laptop and is there a size limit? I would gladly spend $100 on a new drive if I knew what would fit, and does anyone know where I might find a good battery for it cheap, a new one is over $125 on E-bay and I don't feel good about buying a use one there? And do laptops need a special version of windows or will any off the shelf version work? Thanks
 

Relevancy 39.13%

pls. help me i need drivers for notebook Panasonic CF-X1.thanks
 

Relevancy 39.13%

here is the issue sense i upgraded to windows 7 i can no longer burn dvd's. i looked in the device manager and it has now been labeled as a cd drive and not dvd . This has also effected nero as well. I have been searching forums for days with no answers to this at all. it seems rather hopeless at this point i guess. To think this all started with the quest to create a win 7 rescue disk so i could fix my desktop. . . .

A:panasonic uj-822b and windows 7

Hi Werterion,

Have you tried updating the device's drivers yet? Here's a tutorial: Installing and updating drivers in 7

Cheers,

Walker
Windows Outreach Team

http://www.sevenforums.com/hardware-devices/89032-panasonic-uj-822b-windows-7-a.html
Relevancy 39.13%

I have a friend with a toughbook laptop and we have taken it apart to the core to find that the cpu is a standard 2.8v socket 7 p166mmx pentium cpu. we cannot find jumpers anywhere and wonder if there is any way to upgrade this chip to a 2.8v p233mmx or to one of these low volt socket 7 p266mmx cpus.

We would like to put in a k6-2 but see no way of configuring the chip. These units came stock with 100-166mhz pentium laptop and standard cpus so there must have been a way of "jumpering" them to run each chip

Any thoughts?

Thanx
 

A:Panasonic CF-25 notebook cpu upgrade

Hmm, we just installed a pentium MMX 200mhz cpu and it works great but only at 166mhz like the old cpu.

There must be a way of reconfiguring the board with different multipliers as the laptop came with anything from a p100 to a p150. but the bios has no options for this and the motherboard itself does not have jumpers to change.

Any ideas?
 

https://forums.techguy.org/threads/panasonic-cf-25-notebook-cpu-upgrade.127076/
Relevancy 39.13%

I'm working on a Panasonic toughbook CF-27 with xp sp3, 256 ram, no wireless card or usb. I had this laptop for over 10 years and had it in storage for the past 8 due to computer problems but want to put it back in use again. My question is am I able to upgrade the memory anymore? find a wireless card(if I'm able to what information do i need to find one)? and how do I go about getting usb ports for it if I'm able too?
 

Relevancy 39.13%

Hey I have a Panasonic Toughbook CF- My friend CF-19 Panasonic Reformatting Toughbook thought he would do me a favor and put Windows Ultimate on it I constantly get error messages and at the bottom of my desktop screen quot Windows Build This copy of Windows is not genuine quot I have a feeling this version of Windows is too much Reformatting Panasonic CF-19 Toughbook for my CF to handle anyways Problem being I m not too sure on how he did it or how to reformat it myself So How would I go about wiping this computer and then find a way to use the sticker on the bottom of the tablet which says quot Reformatting Panasonic CF-19 Toughbook Microsoft Windows XP Tablet PC Edition Panasonic quot Product Key xxxxxx Maybe an easy way out is to buy a product key and downgrade Hmm Any help would be great I have a research paper due and instead of buying a new laptop- I decided to fix this one Hah hope that wasn t a bad idea Speak kindly in your tech lingo please I will do my utter best to keep up nbsp

A:Reformatting Panasonic CF-19 Toughbook

Use the techguy utility to give us the specifications. From what I've been able to garner from Google and using the search Toughbook CF-19 , it should be able to support Windows 7 and should have had it as default, not the tablet version.
We need more details that the utility will reveal.
 

https://forums.techguy.org/threads/reformatting-panasonic-cf-19-toughbook.1111797/
Relevancy 39.13%

Hello all. I purchased the panasonic vdr-d100 dvd camcorder this weekend. They hav e not released the vista driver for it yet so i downloaded the xp driver and went to install it on my xp computer and I get this error. Error 071:Cannot get drive. I call panasonic and they say it is a problem with my computer and not their camcorder/driver. Any suggestions?
 

A:Panasonic DVD Camcorder err 071-cannot get drive

No one knows what to do? that isnt good lol
 

https://forums.techguy.org/threads/panasonic-dvd-camcorder-err-071-cannot-get-drive.565795/
Relevancy 39.13%

So i have an old panasonic toughbook with windows xp on it and when i check the c drive it says that the total space on my c drive is only 18.6 mb but i just had microft word on it and thats like 78 mb isnt that like an anomalie or something?please help ive been posting all day
 

Relevancy 39.13%

Hey missi again, I got so lucky with my dell that I thought I would take a shot at this Panasonic Touchbook. Older laptop, cant find any info on it. Dont have a clue about bios or anything. A friend brought it to me and said see what you can do with it. First time I have ever seen a cd eject out of the keyboard. I do have a model no.CF-61KXF4BAM. Its locked out with a cmos password or something. Any help would be greatful. Im sure its a long shot. Thanks a million missi
 

A:I have a Panasonic toughbook cf-61 locked out

This is fixable. You may need to open up the Laptop
and reset a jumper temporarily.

Sometimes manufacturers post bios default password on there site.

BTW Welcome to Techspot

I hope you have a very pleasurable stay at Techspot.

Regards Jase
 

http://www.techspot.com/community/topics/i-have-a-panasonic-toughbook-cf-61-locked-out.87189/
Relevancy 39.13%

Hi, is anyone able to help?

I have a problem with connecting Panasonic Viera TX-32LXD70 to PC with Windows 7 and graphic card MSI Nvidia Gforce GTX560 TI.

I have tried using Mini HDMI to HDMI cable, and also DFI to HDMI, but none of them work. I have only one HDMI socket in the TV. And on the card there is only mini HDMI and two DFI sockets.

In Nvidia Contro Panel there is an option to find the second screen, but it does not detect it. I have also tried to find it in Screen Resolution options, but it also does not see it.

I have had this TV connected in the past, but since upgrading to Win 7 (and also buying a new pc) I have been unable to do it.

I have also all the recent drivers for the graphic card.

Any help would be greatly appreciated.

A:Problems with detecting Panasonic TV by PC

Did you select HDMI in the Panasonic's on-screen input signal menu?

http://www.sevenforums.com/graphic-cards/167163-problems-detecting-panasonic-tv-pc.html
Relevancy 39.13%

SD cards and Panasonic Plasma
Hi

Just bought a panasonic plasma (TH-42PZ80U) with an SD card slot and am having a problem with the SD card.

1) The Plasma allows you to view photos on screen, off the SD card. I use a Sony Cybershot as a camera (with a memory stick PRO duo card), so after downloading to my computer, I then download images onto a SD card. The Plasma wont display them?? It says file not available. I am saving the pictures as a jpeg file without modifing them on the computer. I know the pictures are on the SD card because I can open them from the card on the computer. The SD card is a standard 2MB san disk card.
Any help would be appreciated
 

A:Panasonic television and SD card

Read the manual. Which picture format(s) does it support?
 

https://forums.techguy.org/threads/panasonic-television-and-sd-card.755736/
Relevancy 39.13%

When I try to import video files from my Panasonic SDR-H200 video camera to my PC using ImageMixer 3, I get an error message which reads, "IMxBrowser.exe has encountered a problem and needs to close blah, blah, blah" The error signature shows, App Name: imbrowser.exe, App Ver: 1.0.0.20, Mod Name: imbrowser.exe, Mod Ver: 1.0.0.20, Offset: 0002f885.
If I try to use different software to do the same job it indicates that my video camera is not detected, any ideas?
 

A:ImageMixer 3 for Panasonic problem

It would appear that my recently installed Kaspersky I.S.7 was causing the importing problems. I temporarily suspended Kaspersky and everything worked beautifully.
 

https://forums.techguy.org/threads/imagemixer-3-for-panasonic-problem.715680/
Relevancy 39.13%

I have Panasonic camcorder and i am trying to work out how i can capture it onto my laptop... i have vista. I tried downloading the CD of Motion studio but it doesn't work. Can someone help me sort this? Thanks

A:Vista - Panasonic camcorder

You need to have it connected to your laptop through USB or Firewire, depending on what connections your camcorder and laptop offer. Once that is done, and drivers are loaded (if needed), then you need some kind of software to capture the video.

http://www.sevenforums.com/hardware-devices/203954-vista-panasonic-camcorder.html
Relevancy 39.13%

Hi

Just bought a panasonic plasma with an SD card slot.

2 Problems;

1) I can record programmes on to the card, but when I put the card in my Sony Vaio they won't play!

2) Similarly, the Plasma allows you to view photos on screen, off the SD card. I use a Sony T9 as a camera, so after downloading to my computer, I then download images onto a SD card. The Plasma wont display them?? The TV instruction says a folder DCIM will automatically be created for the photos. Could it be that I have managed to get images onto the card, but not in the right place. How do I create a DCIM folder on the card??

Any help would be appreciated
 

A:SD cards and Panasonic Plasma

1) What format are the files in? It might that its in a propriety format, or you dont have the right video codecs on your Sony Vaio.

2) You probably just need to create a folder on the SD card much like creating a folder on your harddrive. and have this named DCIM

The model number of the panasonic would be handy if you have more questions.
 

https://forums.techguy.org/threads/sd-cards-and-panasonic-plasma.494089/
Relevancy 39.13%

I am trying to install a Panasoic KXP1124 paralell printer on my Emachine with WinVista using a paralell to USB adapter. I installed everthing and the print queue says"ready", is not paused, but it just won't print anything.
 

A:panasonic KXP1124 paralell to USB

In my experience, those adapters are hit and miss. Sometimes they work, sometimes they don't.
 

https://forums.techguy.org/threads/panasonic-kxp1124-paralell-to-usb.1058512/
Relevancy 39.13%

When I try to import video files from my Panasonic SDR-H200 video camera to my PC using ImageMixer 3, I get an error message which reads, "IMxBrowser.exe has encountered a problem and needs to close blah, blah, blah" The error signature shows, App Name: imbrowser.exe, App Ver: 1.0.0.20, Mod Name: imbrowser.exe, Mod Ver: 1.0.0.20, Offset: 0002f885.
If I try and use other software it indicates that my video camera is not detected, any ideas?
 

A:ImageMixer 3 for Panasonic problem

It would appear that my recently installed Kaspersky I.S.7 was causing the importing problems. I temporarily suspended Kaspersky and everything worked beautifully.
 

https://forums.techguy.org/threads/imagemixer-3-for-panasonic-problem.715867/
Relevancy 39.13%

I have a Panasonic VDR-D50 handy cam. Today when I tried to use it, video was recorded and everything was fine. Now I am facing two WEIRD problems:

1. Camcoder says Disc is full. But when I insert that small disc in my pc to get my records, the disc is blank. I can't find anything. Again, no recording can be performed without the disc (so where are the videos being saved????). Tried in different PC's.

2. I am trying to replace the disc with the SD Card so that I can write in SD card instead of disc. But I found no option to use the SD Card. I searched the menus of the camcoder.

Can you please help?
 

A:Panasonic VDR-D50 Disc problem

you wont be able to write to the SD card - thats just for still images only
http://shop.panasonic.com/shop/model/VDR-D50?t=specs&support#tabs

sounds like the DISC has been corrupted somehow , if you cannot read in a couple of DVD players

what type of DVD is it - Panasonic use a special Disk called a DVD RAM and I think that can only be used on Panasonic players - I have about 8 of these and used on my Panasonic - but no other device can read them
OR
have you used a DVD-RW
 

https://forums.techguy.org/threads/panasonic-vdr-d50-disc-problem.1081118/
Relevancy 39.13%

Wondered if anyone might be able to help with a problem I'm having with my Panasonic PV-DV203 palmcorder. Whenever I try to record or even play back a tape, I get a message -- "Tape Not Inserted" -- when there IS a tape inserted. The palmcorder will not play or record. I've tried different new tapes and switched batteries, but still get the same result. My tapes are Panasonic and I've only recorded four or five tapes since I bought the camcorder. I haven't used the camcorder very much, and it's never been dropped, abused or overused. Any ideas from anyone? Thanks.
 

https://forums.techguy.org/threads/panasonic-palmcorder-problem.517131/
Relevancy 39.13%

Is it possible to unformat or in other way recover a Hard Drive from a Panasonic DVD Recorder. The model is DMR-EH55.
Im experienced in PCs but I do not know what file system is used for this HDD.
 

A:Unformat HDD on Panasonic DVD recorder?

Do you want to use it in the Panasonic again or in a PC?
If in a PC and it's a standard PATA or SATA hard drive, have you tried fdisk then format with a Windows boot disk?
 

https://forums.techguy.org/threads/unformat-hdd-on-panasonic-dvd-recorder.653897/
Relevancy 39.13%

I have a Sony HDR-CX7 camcorder which records in .mts on to a memory stick and when I download the files onto my hard drive using the bundled software, it saves as .m2ts. I bought the Panasonic BD35 since it plays AVCHD and had an SD slot. I thought I should be able to directly transfer my .mts or .m2ts files on to an SD card and be able to play them but I keep getting an incompatible file error. I tried burning the files on a dvd but that did not work either. I've been trying to figure out what I need to do to convert my files into a playable AVCHD format. If anyone has any experience with this and wouldn't mind giving me a step by step (please be specific) of what to do, I would really appreciate it. Thanks!
 

https://forums.techguy.org/threads/avchd-on-panasonic-bd35.779721/
Relevancy 39.13%

I am making some yoga dvds using image mixer3 for panasonic.
When the dvd's are less than 65mins they write into disc. For my longer dvds - 75min ones- I have bought printable dvd+R 8.5GB (double layer, single sided) however image mixer fails to write. The writing starts normally and everything looks to be coming along just fine then at some point it stops writing, ejects and the messege is "fails to write" (or something similar)
I really want to record some longer dvds(75mins)- I have tried and tried but am stuck. I need help
Jackie - good at teaching yoga - hopeless with computers!

A:image mixer 3 for panasonic

What is the make and model # of your DVD burner? Is it a Double Layer (DVD9) burner? What are the brands of blanks? What is the burn speed you are using to burn DVD's? Are the blanks DVD+R, DVD-R or DVD-RW?
Do not use generic blanks. Use only named brand blanks. (Phillips, Sony, TDK etc) I have most luck with -R blanks and not the +R discs. -+RW discs are harder to work with because they have to be formatted before they can be used and they need to be finalized before they can be ejected. You should burn at the slowest speed for your media. Burning at too fast of a speed will fail the burn or make it so it cannot be played without skipping.

http://www.techsupportforum.com/forums/f10/image-mixer-3-for-panasonic-651481.html
Relevancy 39.13%

I just swapped my dvd recorder from a philips to panasonic as my philips was written off by comet. I have a security camera which runs through my vcr and my tv picks it up as though its a tv channel. Before i exchanged my recorder i could record my decurity camera. Now i can record the security camera but as soon as i turn off my turn i loose the signal. I cant connect it direct as i also have my cable box connected to recorder and it only has 2 scarts. Anyone know what im doing wrong??
 

A:NEED HELP CONECTING PANASONIC DVD RECORDER TO vcr

"but as soon as i turn off my turn i loose the signal"
Obviously a typo but what is it that you turn off that causes you to lose the cam feed ?

There are multi-scart boxes available these days which effectively allow you to have several scarts running into 1 scart socket on your tv/recording device - you just press the approprate button on the scart box for the preferred feed .
 

https://forums.techguy.org/threads/need-help-conecting-panasonic-dvd-recorder-to-vcr.603703/
Relevancy 39.13%

when I connect DVC to usb port, win98se recognizes new hardware,installs driver. In device manager, dvc mass storage is shown under usb device. This is all correct according to operating instructions. When I go to "my computer" to access removeable storage device, there is no icon for it. I can't access photos from sd card in camcorder.

CAN ANYONE HELP?
 

https://forums.techguy.org/threads/panasonic-digital-camcorder.432677/
Relevancy 39.13%

well, the title says all
my panasonic cd stereo system sa-pm21
"Top Loading CD Player, cassette deck, AM / FM tuner
MP3 Playback with ID3 Tag
CD-R/RW Playback
Full Range Bass Reflex Speakers
Remote controller"
When i turn it off(the press of the button) for example, i am going out of my room(about 5-8 secs after i turn it off) it turns on, but not like a player, it goes like this:
Turns on
Some line goes thru screen and it looks like it is "checking" that all the text is ok, all the text(id3 tag,mp3,tune,vocal,hello,good bye and all this stuff goes on infinitive loop and reshows and reshows. sorry if you missunderstood i will try to make some pics then

Thanks for reading
 

A:My Psycho Panasonic player

Bump, 3 days waiting
 

http://www.techspot.com/community/topics/my-psycho-panasonic-player.126934/
Relevancy 39.13%

Guys,

Here is the scenario:

1. When I had MP3 files on my Laptop's HDD and burned them, they played on my Panasonic (Brand New) car stereo with no issues.
2. My machine needed a rebuild so I backed up all the data to my external HDD also I gave away my CD to a friend of mine thinking that I would burn another one again.
3. Now after rebuilding my machine, I moved my MP3s from external HDD to my Laptop HDD, burned the cd and tried playing in my Car Stereo, first 5 songs would play and rest won't.

What could be the reason for this? I am using Nero 6.6, I tried 'DATA' option and 'MP3' option, both did not work.

Any help would be appreciated.
 

Relevancy 39.13%

Hi, everyone! Using Windows XP here with a Panasonic KX-P1124 and have a strange issue: we're printing on a continuous stencil paper (for part marking) and every time the label is done printing, the printer feeds about 5 labels through. We have to rip off our label, then move the paper down, then reload. Takes awhile to work through if you are printing more than one label. I know this is an old printer but it works well and we need the stencils. Does anyone have the same issue or knows of a fix? We've tried to change the form feed to "not available" but it doesn't work. Thanks in advance!
 

A:Panasonic Dot Matrix printing in XP

change the page size on your physical printer. sounds like the default is not set to the size of your label.
 

https://forums.techguy.org/threads/panasonic-dot-matrix-printing-in-xp.914902/
Relevancy 39.13%

I have an Mgd laptop with a VGA plug, to a Panasonic plasma tv with an HDMI plugged in, windows xp will not recognize the tv. Is there a way to get my desktop dislayed on the tv?
 

A:how to connect laptop to Panasonic

i am not sure i undrestand what cable you are using to connect the laptop to the TV?

your laptop has VGA, you should be able to use that. it might also have an s-video out which you can also use.
the TV has HDMI, which you probably will not be able to use. check if it has VGA and use that, if it does not, it probably has a DVI port, which should work fine. you can get a VGA-DVI cable or a VGA cable with a DVI adapter.
you can google these ports to see what they look like.

hope this helps
 

https://forums.techguy.org/threads/how-to-connect-laptop-to-panasonic.940989/