Windows Support Forum

Need help fixing my local area network

Q: Need help fixing my local area network

I am running a computer using Vista and I just moved it from one room to area fixing network help local Need my another Before moving the computer Need help fixing my local area network I had no problems running both Xbox Live and my internet connection on the computer My connection Need help fixing my local area network is a DSL service through SBC and it runs through a D-Link Router that has slots for ethernet cables as shown below - - - - - There are four immediately next to each other on the left and one set apart slightly farther to the right When I Need help fixing my local area network have my three cables one for the modem one for my xbox and one for my computer in the slots on the left I can connect to the internet through my computer as they are right now but not through my Xbox If I move the cable for my computer over to the slot farthest on the right I can connect to Xbox LIve but I can t connect to the internet through my computer If anybody could provide any sort of solution it would be greatly appreciated EDIT Is there a chance that it could be my ethernet cable While I may have moved the computer from one room to another the only change I really made at all was using a longer ethernet cable for my computer to my router nbsp

http://www.techspot.com/community/topics/need-help-fixing-my-local-area-network.130889/
Relevancy 100%
Preferred Solution: Need help fixing my local area network

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 73.96%

I recently had to re-install Windows XP (SP2) on my Dell 5150 Laptop. I have not been able to get my internet connection to work since the re-install. I have plugged the cable into my network card in the computer and the light that comes on is orange and not green. I know the cable and internet connection work fine because I use that same connection/cable on my desktop computer with no problems. I recently used this same port on my laptop not more than a week ago with no glitches. I have gone to Network Connections in the control panel and there is no Local Area Connection icon being displayed. There is a 1394 Connection and a Wireless Network Connection icon displayed but no LAN connection. I do not have a wireless Network connection so I am unable to use that. Please let me know what you think about why I do not have a LAN connection.

Thanks!
 

A:Local Area Network

You should probably post your thread under the "Networking" forum.
 

https://forums.techguy.org/threads/local-area-network.699489/
Relevancy 73.96%

I recently had to re-install Windows XP (SP2) on my Dell 5150 Laptop. I have not been able to get my internet connection to work since the re-install. I have plugged the cable into my network card in the computer and the light that comes on is orange and not green. I know the cable and internet connection work fine because I use that same connection/cable on my desktop computer with no problems. I recently used this same port on my laptop not more than a week ago with no glitches. I have gone to Network Connections in the control panel and there is no Local Area Connection icon being displayed. There is a 1394 Connection and a Wireless Network Connection icon displayed but no LAN connection. I do not have a wireless Network connection so I am unable to use that. Please let me know what you think about why I do not have a LAN connection.

Thanks!
 

A:Local Area Network

Did you install your network controller and driver?

DOWNLOAD

DOWNLOAD
 

https://forums.techguy.org/threads/local-area-network.699501/
Relevancy 73.1%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Ultimate, Service Pack 2, 32 bit
Processor: Genuine Intel(R) CPU T2060 @ 1.60GHz, x86 Family 6 Model 14 Stepping 12
Processor Count: 2
RAM: 1013 Mb
Graphics Card: Mobile Intel(R) 945 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 238472 MB, Free - 105367 MB;
Motherboard: Quanta, 30BB
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled

Plug a cable into Local Area Network Connection:
1. Where is the local area network connection located,

2 and what type of cable is required.

3 I am having constant trouble connecting to my broadband internet connection and my connection is very slow causing poor video transmission on my Skype to Skype video calls.
 

A:Local area network connection

What are you asking about with regards to "Local Area Network Connection"? If you have cable broadband service, you have an ethernet cable somewhere between your modem, router, and/or computer.
 

https://forums.techguy.org/threads/local-area-network-connection.1043138/
Relevancy 73.1%

I have 2 desktop PCs. Both have Win 7 Ultimate. They are connected by a router/cables.
In Windows Explorer view, "Network" tab, computer A can see shared content on computer B.
Computer B cannot connect and view shared content on computer A.
I get a message "Current location not available"
Thanks for any solutions.

http://www.sevenforums.com/general-discussion/394818-local-area-network-puzzle.html
Relevancy 73.1%

My computer is telling me a local area connection cable is unplugged. I looked behind the computer and didnt notice anything "unplugged". Any ideas what this could mean?
 

https://forums.techguy.org/threads/local-area-network-problem.726852/
Relevancy 73.1%

I used to have a network, with this computer being the client pc, but once my bro moved away, he took his computer, therefore we no longer have a network. But the problem is that ever since he left, this computer still thinks its apart of a network (I'm guessing that diagonsis) and I have to have "Local Area Connection Internet" turned on to turn on my actual internet connection. Also, as you would guess "Local Area Connection Internet" has the error message "Limted or no connectivity". So if anybody can tell me how I can use my internet without haveing to turn on "Local Area Connection Internet" I would be grateful.

I'm not so great with networking, but I'm pretty sure there is a simple way to fix this problem.

Thanks.
 

Relevancy 73.1%

Local Area Network Puzzle
I have 2 desktop PCs. Both have Win 7 Ultimate. They are connected by a router/cables.
In Windows Explorer view, "Network" tab, computer A can see shared content on computer B.
Computer B cannot connect and view shared content on computer A.
I get a message "Current location not available"
Thanks for any solutions.
 

https://forums.techguy.org/threads/local-area-network-puzzle.1169940/
Relevancy 73.1%

I have 2 desktop PCs. Both have Win 7 Ultimate. They are connected by a router/cables.
In Windows Explorer view, "Network" tab, computer A can see shared content on computer B.
Computer B cannot connect and view shared content on computer A.
I get a message "Current location not available"
Thanks for any solutions.

http://www.sevenforums.com/network-sharing/394818-local-area-network-puzzle.html
Relevancy 73.1%

Good afternoon.

Last nite I started to log on and my start page came up with "cannot display...." The lower left corner had the 2 screen computer icon blinking saying "local area network is unplugged". I never unplugged anything. I was able to go on the net before. I have had the computer since Jan 04. I am on a cable modem. What is the purpose of this LAN connection? And what do I have to do to surf the web.

Please be descriptive as I am not very knowledgble on this. If I forgot to mention anything, please let me know.
Thanks so much
 

Relevancy 73.1%

Good morning people. A problem has occured that I have never seen before. Last night before heading off to bed, as usual I turned off my modem and as usual the Local Area connection "A network Cable is unplugged" Icon appeared in the Start Bar.
This morning, When I turned the modem back on, everything came back on line and seems to be working fine except the L A N Icon is still there. If I right or double click on the Icon I get the response "Change Windows Firewall Settings" or "Open Network Settings". When I double click on the Icon, A dialogue box comes up showing these same two responses.
Any ideas.
 

A:Solved: Local Area Network

It's just a status icon. You can turn it off in the properties of the network connection.
 

https://forums.techguy.org/threads/solved-local-area-network.813060/
Relevancy 73.1%

Can anyone tell me how to change the Local area network icon in the task bar. I find it confusing to have the same icon for my internet connection.

Tia,

Allyn Hughes

A:Local area network icon

You should just be able to right click on the icon and go to properties and then click on change icon.

http://www.techsupportforum.com/forums/f10/local-area-network-icon-5113.html
Relevancy 73.1%

I don't know why I've been recently getting this taskbar icon with Local Area Network "The network cable is unplugged" message, when in fact, the Ethernet cable is plugged all along. It appears for about 1-2 seconds, then disappears. This disconnects my Internet connection for about a couple seconds, and is reconnected instantly.

I have the D-Link Wireless 108G AirPlus XtremeG DI-624 router, with Wireless connection disabled. Currently, there are a total of 2 computers hooked onto this router through Ethernet cables.

Is anyone else having this problem?
 

Relevancy 73.1%

I have been having problem connecting to my wireless modem through LAN cable out of a sudden 4 weeks ago.

Whenever I try to connect now, it will say "acquiring network address" and it will subsequently fail or says "limited or no connectivity". I've tried repairing the connection but it doesn't seem to work.

To check whether it is the problem with my modem, I have tested using my wireless connection and it seems to work fine. I've also ping 127.0.0.1 and got the response immediately.

Laptop - Dell Inspiron 640M
Modem - Dynalink RTA1025W
Network Card - Broadcom 440x 10/100 Integrated Controller

Thank you in advance for advice.
JY
 

A:Problem with Local Area Network

The symptoms are you have either a driver issue, bad cable, bad port on the router, or a bad NIC.

I'd start by reloading the NIC drivers, if that doesn't do it, use a new cable and a new port on the router. If all else fails, you'll need a new NIC. Since that would be part of the motherboard, let's hope it's not the NIC.
 

https://forums.techguy.org/threads/problem-with-local-area-network.858621/
Relevancy 73.1%

Are you able to view other people files by default on your LAN? For example, if I wanted to view someone else who is connecting to my router files would he or would I be able to see them without the use of Remote desktop/assistance or any other source?

P.S. This is NOT on a domain it's on a homegroup I believe so.

A:Local Area Network in Windows

File sharing would have to be turned on in order to view. Short answer, it depends.

http://www.techist.com/forums/f9/local-area-network-windows-276758/
Relevancy 72.24%

I think I posted this before but I don t know why this is suddenly happening again On the taskbar the quot locak area network is unplugged quot icon is appearing and when this happens my internet goes off on Network taskbar unplugged Local Area for the time being Then it disappears about - seconds later and I am reconnected again It s very irritating and the worst thing is I don t know what the heck is wrong The network cables are connected fine D-Link DI- Wireless G router is not touched Nothing is touched concerning the cables router etc I have comp uters hooked up to the one router by network cables Thus that s why it puzzles me why does this icon appear and disconnects me It sometimes happen once in a while and sometimes happens quite frequent I don t know what s going on nor what s causing it If anyone can help me solve this problem I will greatly appreciate it Thanks nbsp

Relevancy 72.24%

Here's the basic deal I'm running on a toshiba laptop at my parents place up visiting for a week My father is running off of a desktop We both use win bit We are hardwired into a router We both run area connection network Local issues. firewall and anti-virus programs and have come up clean in both cases Other systems plugged into the same router still have local area access We have both recently installed logmein hamachi to be able to operate more easily as a lan along with the other family members The systems other Local area network connection issues. than those two things don't have a lot of similarities At the time we started having Local area network connection issues. issues the VPN software was completely off and disabled on both computers His computer suddenly was not able to connect to the LAN within minutes in the middle of researching a web page to try and get him running my computer suddenly was also no longer able to connect Restarted the router Ran the winsock fix Installed new ethernet drivers In the case of running an ipconfig it reads as everything disabled and for obvious reasons cannot renew DHCP is enabled Ran the system hardwired into a backup router coming off the main modem didn't make a difference Says that it's connected into the LAN and you can see other systems on the router but cannot connect through to the internet Any ideas would be greatly appreciated

A:Local area network connection issues.

I recently worked on a system where one of the users had installed VPN software possibly Hamachi and it completely ruined the networking on that system. Try rolling back to a restore point if you have one from before you installed the VPN software.

http://www.techsupportforum.com/forums/f217/local-area-network-connection-issues-595600.html
Relevancy 72.24%

I am having intermitent shut down and turn on with local area connection I purchased a new lynksis router which i Area lost Connection Network Local get all green lights One of your other threads sounded similar to mine and I am attaching quot nbtstat quot Microsoft Windows XP Version C Copyright Local Area Network Connection lost - Microsoft Corp C Documents Local Area Network Connection lost and Settings Jonathan gt nbtstat - n Displays protocol statistics and current TCP IP connections using NBT NetBIOS over TCP IP NBTSTAT -a RemoteName -A IP address -c -n -r -R -RR -s -S interval -a adapter status Lists the remote machine s name table given its name -A Adapter status Lists the remote machine s name table given its IP address -c cache Lists NBT s cache of remote machine names and their IP addresses -n names Lists local NetBIOS names -r resolved Lists names resolved by broadcast and via WINS -R Reload Purges and reloads the remote cache Local Area Network Connection lost name table -S Sessions Lists sessions table with the destination IP addresses -s sessions Lists sessions table converting destination IP addresses to computer NETBIOS names -RR ReleaseRefresh Sends Name Release packets to WINS and then starts Refr esh RemoteName Remote host machine name IP address Dotted decimal representation of the IP address interval Redisplays selected statistics pausing interval seconds between each display Press Ctrl C to stop redisplaying statistics C Documents and Settings Jonathan gt ipconfig all Windows IP Configuration Host Name Jonathan Primary Dns Suffix Node Type Unknown IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Broadcom NetXtreme xx Gigabit Cont roller Physical Address - -B - F- -D Dhcp Enabled Yes Autoconfiguration Enabled Yes IP Address Subnet Mask Default Gateway DHCP Server DNS Servers Lease Obtained AM Lease Expires AM Ethernet adapter Local Area Connection Media State Media disconnected Description Broadcom NetXtreme Gigabit Ethernet Physical Address - - - E-B -C C Documents and Settings Jonathan gt I hope you can help me nbsp

Relevancy 72.24%

Hi guys I still have this problem please help I have pcs desktops amp laptop Router Model no XWL- GRAR I have an X-Micro Router I sent the first one back now on the second unit x-micro also say there is no firmware to install for this unit its to new PC amp PC are hard wired into the router both are O S win k AVG anti virus The laptop is wireless O S win XP home amp norton anti virus Everything works fine until I shut down the laptop Then the trouble starts A bubble appears bottom right says local area connection unplugged This happens Every Seconds it Re-Connects amp then disconnects on both desktop pcs at the same time If I restart the laptop the connection is cable network unplugged area local is then stable again on all pcs This is what i have done so far sent the router back and recieved replacement still no good checks done are - plug in pc hard wired result it disconnects then reconnects every secs plug in pc hard wired result it disconnects then reconnects every secs plug in laptop it works local area network cable unplugged fine ok no problem So this points to O S or the anti virus system ON pc amp being the problem but if it is why does every thing work correctly on pc amp while ever the laptop is local area network cable unplugged connected ive been trying to sort this out since xmas can any body help please note this bubble pops up every secs On PC amp Even when the router is unplugged from the modem please also note That pc amp pc work correctly when plugged directly into the modem and never disconnect SO as its Hard wired I would have thought it should still work Just like an extention lead what can i do Does anyone out there have an X - MICRO ROUTER on Win K nbsp

A:local area network cable unplugged

boy, this stinks! I would look for another manufacture's product!

disconnecting one device should not effect the others on that same router -- EVER!

(of course all others lose their print/file shares to the disconnected system :knock
 

http://www.techspot.com/community/topics/local-area-network-cable-unplugged.71282/
Relevancy 72.24%

Hello all New to the forum But Network & No Area Functional No Internet Local not new to the world of computers with issues I just recently brought home with me my friends Dell Dimension E The system that is operating on this machine is Windows XP Media Edition I ran SpyBot S amp D to at least get to clean up some things in the PC Then I did a Disk Clean up to hopefully let the PC breath a little Then I installed McAfee to delete any other virus or malware that may be on the PC Well it froze mid way after removing a No Local Area Network & No Functional Internet few things Now when I boot up I get a message that stat that an error has occurred with startdvr exe That when I search on google brought me to this site biggrin gif There was also another error that came up when McAfee states it found a trojon stating that lanmandrv exe has an issue deleting or being quarantined Also I tried to get on the internet and it wont go on And when I go into network places I get an error message that state the following quot The Network connections folder was unable to retrieve the list of network adapters on your machine Please make sure that the network connections service is enabled amp running quot Also there is no Local Area Network Icon in the Network connections section under my network places Any help to help me finish cleaning out this PC and getting it back on the internet and updated would be greatly appreciated Also I don t think that just erasing and redoing the PC is an option at this point unfortunately due to the fact I don t think they have a CD to restore or have made a back up CD not as tech knowledgeable as moi but I cut them some slack lol Again Thank You In Advance YotaFun PS I was told to retrieve a hijackthis log to post So here it is Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system Ati evxx exe C WINDOWS system svchost exe C Program Files Windows Defender MsMpEng exe C WINDOWS system spoolsv exe C WINDOWS system CTsvcCDA exe C WINDOWS eHome ehRecvr exe C WINDOWS system svchost exe C WINDOWS eHome ehSched exe C Program Files Common Files McAfee HackerWatch HWAPI exe C PROGRA McAfee MSC mcmscsvc exe c PROGRA COMMON mcafee mna mcnasvc exe C WINDOWS Explorer EXE C PROGRA McAfee VIRUSS mcods exe C PROGRA McAfee MSC mcpromgr exe C WINDOWS ehome ehtray exe C Program Files Java jre bin jusched exe C WINDOWS stsystra exe C Program Files Creative SBAudigy Surround Mixer CTSysVol exe c PROGRA COMMON mcafee redirsvc redirsvc exe C WINDOWS system Rundll exe C Program Files Creative VoiceCenter AndreaVC exe C Program Files Musicmatch Musicmatch Jukebox mm tray exe C DOCUME EDDIEB LOCALS Temp clclean C Program Files Common Files InstallShield UpdateService issch exe C PROGRA McAfee VIRUSS mcshield exe C WINDOWS System DLA DLACTRLW EXE C Program Files Common Files Real Update OB realsched exe C PROGRA MUSICM MUSICM MMDiag exe C Program Files QuickTime qttask exe C Program Files iTunes iTunesHelper exe C Program Files MUSICMATCH Musicmatch Jukebox mim exe C Program Files Windows Defender MSASCui exe C Program Files Creative MediaSource Detector CTDetect exe C Program Files Skype Phone Skype exe C WINDOWS system ctfmon exe C PROGRA McAfee VIRUSS mcsysmon exe C WINDOWS System qmebdank exe C PROGRA Yahoo MESSEN ymsgr tray exe C Program Files Digital Line Detect DLG exe c PROGRA mcafee com agent mcagent exe C Program Files McAfee MPF MPFSrv exe c PROGRA mcafee VIRUSS mcvsshld exe C WINDOWS eHome ehmsas exe C Program Files Common Files Creative Labs Shared Service CreativeLicensing exe C Program Files iPod bin iPodService exe C Program Files Trend Micro HijackThis HijackThis exe C Program Files Windows Defender MpCmdRun exe R - HKCU Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId g mail intl us R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink Link... Read more

https://forums.techguy.org/threads/no-local-area-network-no-functional-internet.707213/
Relevancy 72.24%

on my computer i have two network
1. local area network 1(my isp)
2. local area network 2(hamachi)
so can u tell me how do i change my primary lan so that in command prompt i can access telnet through the ip address provided by hamachi.
 

A:how to change primary local area network?

What exactly do you want to do???

Hamachi will be the default route for any IPs in the 5.x.x.x range. You need to be in the same network as the Hamachi IP you want to telnet to, though. That is, you have no access to my Hamachi IPs through telnet or other means.
 

https://forums.techguy.org/threads/how-to-change-primary-local-area-network.769883/
Relevancy 72.24%

Hello I hope someone can help me I am on a Gateway Solo XL running XP Home SP I started having trouble with my Local Area Connection and after trying ipconfig release renew Network Local load Area Connection Cannot as well as reconfiguring TCP IP properties dialogue box remained shaded therefore I was not allowed to make ny changes at all I tried uninstalling the device After rebooting the system a yellow exclamation point appears in Cannot load Local Area Network Connection the device manager at my network adapter Intel Pro VE Network Connection I receive the Cannot load Local Area Network Connection following error This device is not working properly because Windows cannot load the drivers required for this device Code When I try to uninstall again I am told the the device was not able to unistalled because it may be needed in order to boot I ve tried downloading updated drivers and using the Recovery CD to no avail At the time I did try the Google Desktop Search but abandoned it before it Cannot load Local Area Network Connection ever finished trying to index my hard drive I used the Google troubleshoot network program to undo any changes made and return my configuration to its original state but still no Local Area Connection I know that it has to be something stupid that I am overlooking I would appreciate any help anyone could provide nbsp

A:Cannot load Local Area Network Connection

i would open up the tower and take off the network card.

then boot up the computer as it is (without the nic card)

then shut down.... put the nic card back on (on a different slot if possible)
and then boot up again....

try installing the drivers again if it needs them but xp should auto-install everything 4 u.

if it continues troubling u try changing the network card itself as it my be faulty
 

https://forums.techguy.org/threads/cannot-load-local-area-network-connection.355222/
Relevancy 72.24%

I reformatted my computer yesterday and I try to connect to xbox live by bridging the Local Area Network connection with the wireless connection.. but as you can see my LAN icon is missing.. What do I do to bring it back?

A:[SOLVED] Local Area Network Missing

Hi NonTechnicalGuy...sounds like you just need to reinstall the network card drivers. Did you get a driver disc with your computer? If not, you should be able to sort the issue out by visiting Windows Update.

http://www.techsupportforum.com/forums/f10/solved-local-area-network-missing-494093.html
Relevancy 72.24%

So, just a couple of days ago i started having problems with my internet, I can't seem to connect via an ethernet cable (wireless works fine though) I've tried loads of methods I've found online but nothing seems to work, any help at all would be greatly appreciated.
 

A:Local Area Connection - Unidentified Network.

can we see an ipconfig /all and a device manager screen shot please
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

This should also work for windows 8
Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
The results from the notepad should now appear in the forum reply.
------------------------------------------------------------------------
------------------------------------------------------------------------
Device Manager
Post back the results in device manager
You will now need to take a screen shot and copy that back to the working PC.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the screen shot and attach the screen shot in a reply on the forum here.

how to access device manager for different windows versions
http://www.computerhope.com/issues/ch000833.htm

Hold the Windows key and press Pause key, should open to allow device manager to be seen, menu on the left hand side

on a laptop you may need to use Hold the Windows key and press FN key + the pause key

if the above does not work then -

Windows 7 or Vista
Click on the Start Orb > In the Start Search box type > device manager and then press enter
or
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
start > control panel> System and Security> Device Manager

Windows 8
If you happen to be using a keyboard with Windows 8, the quickest way to open Device Manager is via its shortcut on the Power User Menu, accessible by pressing the WINDOW and the X keys together.
If on a touch screen - have a read here http://pcsupport.about.com/od/windows-8/a/device-manager-windows-8.htm

once you are in device manager then

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X

post a screen shot of the device manager - network adapters

To post a screen shot of the active window.
1) hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
OR
2) if you are using Vista/Windows 7 you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool

To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.
----
Full details are available here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot
 

https://forums.techguy.org/threads/local-area-connection-unidentified-network.1076654/
Relevancy 72.24%

Ive tried basically evrything.
Ive tried Ip/tscp dumps
bios lan checks
system restores
2 separate other wireless network adapter
tried sharing network with another computer
to no avail, im alas stuck.
What to do?

A:There was a problem with a local area network driver

Hi Welcome to Seven Forums ... Can you please fill in your System Specs ..

The Link below will help you achieve this ...
System Info - See Your System Specs
Have you any errors in the Device Manager ? ....

http://www.sevenforums.com/drivers/345475-there-problem-local-area-network-driver.html
Relevancy 72.24%

Please help me I have searched mindlessly for days for a solution to this problem and i have yet to stumble across an answer My problem lies when i try to set up a file Local Solved: area problems Network and print sharing network between and XP Home computer and an XP Pro computer The Solved: Local area Network problems computers CAN ping eachother just fine I used the network setup wizard on the xp pro machine and setup a workgroup named family and added that computer to that network I went over to the Xp home computer and used the network setup wizard to setup a network called family i followed the EXACT same steps in both wizards I rebooted both computers and got the following results Xp Pro machine sees the network and both computers Xp Pro machine can grab files from shared folder on Xp Home computer Xp Home machine cannot see the network or the computers in the network Both computers can still ping each other just fine Now I have tried disabling firewalls all firewalls are disabled and all antivirus is disabled File and print sharing are enabled on both computers and so is the client for microsoft networks Netbios is enabled on both computers Also i dont think it makes much difference because i can ping both computers but i am using a dsl modem with a linksys wrt g ver wireless router The xp pro machine is connected via ethernet and the Xp Home machine is connected via wireless g The xp pro machine has a static private ip and the home machine acquires an ip via dhcp from the router There is also a DMZ setup to the Xp pro machine and that computer gets qos priority when bandwidth is limited The only problem i can see is that maybe the network setup wizard is different on the os s but i dont think so because the pro machine works flawlessly This variable could be eliminated by using an xp cd to run the setup wizard on both computers Using the same cd should eliminate any differences Thanks for any help and feedback Im about to go insane Please let me know if you need any more info on my part but i think that covers most of it nbsp

Relevancy 72.24%

Im planning to do a LAN for internet/file sharing and of course LAN game party's
There are people that living far from each another like 1 mile away.... thats a problem.

Cat5 Ethernet cables are not made for long distance connectivity ( 100 meters of length max, otherwise bad connection).

So because i need a connectivity between pc's for long distance I can use Wireless, expensive, and because I prefer wired
and I heard that there is a way to convert CAT5 cable into phone line, because phone lines can be used for long distance connectivity without problems.

So I wonder if there is a way to do that LAN connectivity using phone lines.
RJ45 to phone line, do they exist these adapters? if yes, will this work for me ?

check attachment

Thanks
 

A:Local Area Network Using Phone Lines?

Where are some of them, just google Phoneline Ethernet Bridge. For example this gives you about 2000meters but i'm not sure which phone line requirments are. If all your parties have own internet, use Hamachi... This software is exactly do what you want.
 

https://forums.techguy.org/threads/local-area-network-using-phone-lines.1040055/
Relevancy 72.24%

ok...so i just got a new hard drive...and put it into the old computer that is connected to the internet... DSL...and it doest work...then someone told me that i need to get a network adapter driver?? so i downloaded some and it still doesn't work... when i go to the network connections...it doesn't show the "Local Area Connection" any one has any idea why this is happening?? ......
 

A:Local Area Connection?? Network Adapter??? HELP PLZ!!??

https://forums.techguy.org/threads/local-area-connection-network-adapter-help-plz.676300/
Relevancy 72.24%

System Information Acer V - Serial NXM AED AD SNID Local Area Network Device Broadcom NetLink Gigabit EthernetDriver Provider MicrosoftDriver Date - - Driver Version Losing V5-171; Local aft... Network Area Occasionally Digital Signer Microsoft Windows no fall-back driver is available after upgrade to Windows nbsp Device instance path PCI VEN E amp DEV B amp SUBSYS amp REV amp D D amp amp E From nbsp Friday July after upgrading to Windows I have V5-171; Occasionally Losing Local Area Network aft... problem with my Local Area Network connection nbsp All was well when running laptop on Windows nbsp Now after update to Windows nbsp I have intermittent problems with local area connection to laptop There are no problems with WiFi connections nbsp When I run Windows Network Diagnostics it reports The default gateway is not available Windows Network Diagnostics says nbsp it does an Adapter Reset during its process After this the local area connection again works fine - until next loss V5-171; Occasionally Losing Local Area Network aft... of connection Highly annoying nbsp I have verified that the network adapters have the latest firmware According to MS anyway I have a nbsp Broadcom NetLink Gigabit Ethernet device and for WiFi a Qualcomm Atheros AR BWB Wireless Network Adapter nbsp I also rebooted my UniFi network equipment power off on Problem still exists nbsp I have tried to find info and or other driver at Acer and Broadcom websites No luck to find posting which feels relevant There are other mentions of similar problems but none with my configuration nbsp Hope you can help Rgds nbsp

http://community.acer.com/t5/V-and-VN-Series-Laptops/V5-171-Occasionally-Losing-Local-Area-Network-after-Upgrading-to/td-p/446843
Relevancy 72.24%

We have a PC and a laptop. The PC is connected via a cable and the laptop, through wifi. Is there any way we could play LAN? preferably with no cables involved.
or if there is already a thread exactly solving my problem, I'd gladly be directed there.

The PC runs on windows 7 and the laptop on windows 8. Is that even possible?

A:How to play in a Local Area Network with a router

Of course you can, you are already in one "LAN", just configure the game you're playing.

P.S. Configure or disable your firewalls

http://www.sevenforums.com/network-sharing/289112-how-play-local-area-network-router.html
Relevancy 72.24%

I have recently setup a small business network using 4 computers, 2 printers, one Dell switch, one router, one NAS and two wireless router extender (repeaters). I am using DHCP for all devices, with no management control on switch or router. All devices are WIRED, with only the extenders used by members for wireless connections.

Everything worked initially however now the computers periodically lose internet connection (limited) for no apparent reason. When I remove the wireless extenders (we are a small club so during busy times this will get a lot of connections from customers) the the computers gain access to the internet again. The only thing I can think of is the DHCP is somehow confusing the IP addresses allocated on the repeater router. Any ideas anyone?

I could introduced a managed system e.g. allocating IP addresses to each machine however I was hoping to avoid this.
 

A:Setting up a small local area network

The only thing I can think of is the DHCP is somehow confusing the IP addresses allocated on the repeater router.Click to expand...

If you are telling us that you have multiple Dhcp servers on the network that can certainly give duplicate IP addresses if the address spaces are not unique.
 

https://forums.techguy.org/threads/setting-up-a-small-local-area-network.1126822/
Relevancy 72.24%

I had lot of problems with my laptop earlier when my wired connection didn't work at all... wifi did. However yesterday i got the wired connection to work. I use an ethernet cable very long one to connect to router.

Today i cannot connect wired. Not only that, i went to local area network and i dont even see local area connection icon. All i see is the wifi connection.

Does anyone know how i can fix this issue?

A:No Local Area Network Connection Showing?

Im checking out other threads i found online and someone mentioned to check to see if its disabled under BIOs and that person said yes that fixed the issue. Can someone tell me how to do this if this might be the reason?

http://www.sevenforums.com/network-sharing/343562-no-local-area-network-connection-showing.html
Relevancy 72.24%

Hey, so just this morning i disconnected all of a sudden, and now i can't connect to the internet with my ethernet cable, my wireless connection is fine though...I've been searching for solutions but nothing has worked so far, i really have no idea what to do.

A:Local Area Connection - Unidentified Network.

  
Quote: Originally Posted by Omar1995


Hey, so just this morning i disconnected all of a sudden, and now i can't connect to the internet with my ethernet cable, my wireless connection is fine though...I've been searching for solutions but nothing has worked so far, i really have no idea what to do.


Have you tried restarting your computer?

http://www.sevenforums.com/network-sharing/264167-local-area-connection-unidentified-network.html
Relevancy 72.24%

At work, we have Internet Explorer (6.0.2800.1106, on Windows 2000 latest SP) configured so that in the "Local Area Network (LAN) Settings," the check box "Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections)." is checked. We have that checked along with an IP address there an port, all configured. It's all been fine and dandy until recently.

For some reason, after a day, it keeps resetting itself, which means we have to check it again. We check it again, then the following day it unchecks itself again. This is throughout the company.

Any thoughts? It only seems to be in Internet Explorer. It does not happen in any other browser. Could it be that Windows update could be automatically on and when it updates, it resets the settings?

Any help is greatly appreciated. I'm about to lose all my hair from pulling it.
 

A:Local Area Network Settings Keep resetting

Are you running AD? If so do you change a policy?
 

https://forums.techguy.org/threads/local-area-network-settings-keep-resetting.321105/
Relevancy 71.38%

Hi guys,

I have got a problem with my brother's computer. I have installed the ethernet controller driver from the CD, but I couldn't be able to connect to the network due to an ethernet cable is not properly plugged in or might be broken. I tried to repaired it but it doesn't help. I went on manufacturer's Web site to look for a driver, but i couldn't find it. And I went on google and couldn't find it either. I don't know what I am suppose to do. The name of the motherboard my brother have got is ASROCK K7NF2-RAID.
Could anyone help me to find me the update driver or how I can be able to connect to the network of the rounter where i could be able to connect to the internet?
Any advice would be much appreicated.
Thanks in advance.
 

A:Local Area Connection Network Issue Windows 7

but I couldn't be able to connect to the network due to an ethernet cable is not properly plugged in or might be broken.Click to expand...

you need to test the cable on another PC and make sure the cable is 1) correctly plugged in and 2) Not broken

for the driver
lets see an ipconfig /all
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

This should also work for windows 8
Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
The results from the notepad should now appear in the forum reply.
------------------------------------------------------------------------
 

https://forums.techguy.org/threads/local-area-connection-network-issue-windows-7.1082947/
Relevancy 71.38%

hello all,

This is my first posting here.

I have two computer connected through LAN and botah have XP. My one computer has internet connection and I am using Windos internet sharing for my second computer.

For past few days, I am unable to upload from file from my second PC (which doesnt have direct internt connection) .. previously everything was working fine but now when i try to uplaod any file using FTP programme from second computer, it will show the progress bar of uploading but it never never complete 100% uploading.. it hangs..

Please help me

Regards
Tabish
 

Relevancy 71.38%

Well, the problem is that I am using a laptop that uses a wireless connection to connect to the internet. It was working fine, but one day it stopped working.

The main difference I noticed was that when I look at the network connections, the wireless part is working, for it describes as having an excellent connection. However, the local area connection says there is a network cable unplugged. I do not use a wired connection though.

I have tried many steps such as a simple restart, re-installing the wireless adapter, and trying to reset the ip address since I noticed that it was 169.254.XXXX.

However, every time I tried to reset the ip address, I run into the problem that it cannot do so because a network cable is unplugged.

Thanks for any help given.

A:Local area connection, Network cable unplugged

A system which has a wired connection which is not being used (but has drivers installed) might reflect the network cable unplugged message.

The simplest solution for any device which is not being used and which is onboard...is to enter the BIOS/Setup and disable the device.

Louis

I don't do wireless...but the 169.254.XXXX normally indicates a networking setup that has gone awry. DHCP is supposed to provide an IP similar to 192.168.0.001 where it employed.

I suggest setting up the wireless connection anew.

http://www.bleepingcomputer.com/forums/t/366460/local-area-connection-network-cable-unplugged/
Relevancy 71.38%

Dear Friends I am running XP on a four-year-old HP and also on a one-year-old HP laptop A standard Linksys router connects the two units via wi-fi or cable if desired Things were working fine until a few months ago when I lent the laptop to my brother Now when I try to use the laptop to connect to the internet via wi-fi it doesn't work The wireless connection on the laptop says that it's got a good Unplugged Area Cable Local Network Connection - signal -- no problem there But the Local Area Connection has that pesky red X and says a network cable is unplugged A third box labelled Connection says that it's also connected I've read a bunch of online Local Area Connection - Network Cable Unplugged posts but they all seem to deal with people using the wrong cable Point is there's no cable plugged into -- or unplugged from -- the laptop I'm not using a cable -- I want to my wi-fi to work like it used to without a cable Some posts says to disable the Local Area Connection I've done that repeatedly but it makes no difference --I still can't get to the internet One other point that may or not mean anything If I do connect the laptop to the router with a cable everything is great -- I get the internet Any help would be much appreciated Thanks Groverman

A:Local Area Connection - Network Cable Unplugged

the first thing i would do is to check that the wireless switch is on. most laptops a have a switch at the side or front. or you might have a key in your keyboard saying fn if it does have click the fn + the wireless sign which will be somewhere there. for example on mine one it is fn + f2. click on start then right click on mycomputer then go to hardware and then device manager. check for any yellow signs if there is you need to download the driver for it.

http://www.techsupportforum.com/forums/f10/local-area-connection-network-cable-unplugged-236062.html
Relevancy 71.38%

I have a Dell Inspiron 5100 Notebook running XP Home with SP2. I connect to a printer and to a Maxtor external drive. My system tray shows 2 Local Area Connections (with "A network cable is unplugged), and 1 Network Bridge (that also says "A network cable is unplugged"). My printer is plugged in.

I show the following in my Network Connections. I want to know if anyone can tell me whether I can delete them? I do not have a LAN connection or High-Speed Internet (although I hope to get the latter soon). Thanks.

LAN or High-Speed Internet
Local Area Connection 2 LAN or High-Speed Inter... Network cable unplugged OCT USB To Fast Ethernet Converter

Network Bridge
Local Area Connection Network Bridge Network cable unplugged Broadcom 440x 10/100 Integrated Controller

Network Bridge Network Bridge Network cable unplugged MAC Bridge Miniport

1394 Connection Network Bridge Disabled, Bridged 1394 Net Adapter
 

Relevancy 71.38%

When using certain programs, I loose the internet connection. After a brief period it will come back on line and if the same program is active, the process will repeat untill I shut down the offending program. The error message presented is "local area connection network cable unplugged". Everything works fine as long as I do not start certain programs. The error is self correcting, but interrupts the communications that were occuring at that time. This is a new problem that arose after I optimed my cable modem settings. Does anyone know what I have done so that I might correct this situation?
 

A:Local Area Connection Network Cable Unplugged

Jallen said:



When using certain programs, I loose the internet connection. After a brief period it will come back on line and if the same program is active, the process will repeat untill I shut down the offending program. The error message presented is "local area connection network cable unplugged". Everything works fine as long as I do not start certain programs. The error is self correcting, but interrupts the communications that were occuring at that time. This is a new problem that arose after I optimed my cable modem settings. Does anyone know what I have done so that I might correct this situation?Click to expand...


firstly, what certain programs are we talking about?
 

http://www.techspot.com/community/topics/local-area-connection-network-cable-unplugged.40316/
Relevancy 71.38%

Hello,

I apologize for my English as it is not my native speech.

So I encountered a problem. I connected my internet cable to PS3, and after about 10 minutes connected it back to my PC and it shows me the problem: Local Area Connection doesn't have a valid IP configuration and Unidentified network. It wasn't the first time I connected my internet cable to PS3, though I had the same problem in the past, I just did what was written in troubleshooting and it helped, but not this time. There was no internet connection on PS3 also. I read a lot of solutions, but it didn't help so I thought maybe someone could help. Please write if you need some additional info, as I am not very tech savvy. Thank you in advance.

P.S. 1)Wireless is working fine. 2) My internet is not connected through router.

A:Unidentified network and Local Area Connection problems

Try unplugging the modem for 30 seconds then pug it back in and connect your cable to your PC. A lot of time with modems its registered by MAC addresses. This is why its a good idea to get a router (The MAC address will never change).

If its still not working after that you might have to call your ISP and let them reset it for you.

http://www.sevenforums.com/network-sharing/279909-unidentified-network-local-area-connection-problems.html
Relevancy 71.38%

I ve had this experience in the story) know area unplugged cable (I same old been it network has local past but not so consistent local area network cable unplugged (I know it has been same old story) as it has been for the last couple months I looked up google and found different experience other people had I live in the same house for years now and have been having different housemates come in and go Since September this year I have everyone in local area network cable unplugged (I know it has been same old story) the house using internet My computer is connected through my DI- router through wired connection The rest of the house my housemates connect wirelessly The message appears in varying periods of time At some periods it occurs about every - minutes or sooner Then at some periods it doesn t occur for more than day or Say if only or people in the house the message may not occur so often or I would have smooth connection Could this be the amount of local area network cable unplugged (I know it has been same old story) wireless connection interference I had tried to connect to the modem directly and I have no problems at all I tried to change one of the cables and check all the cables - no issues I figured it has to do with D-link router I tried to contact D-link tech support through e-mail and one tech support responded that I set up static IP and I did That message still appears And two tech support responded that I should call them D-link phone support cost flat for minutes and I m really trying to avoid this Any ideas G nbsp

A:local area network cable unplugged (I know it has been same old story)

https://forums.techguy.org/threads/local-area-network-cable-unplugged-i-know-it-has-been-same-old-story.766408/
Relevancy 71.38%

until recently I've never had a problem but now it seems that every 5 mins I lose connection. It does this on my computer and my roomates so its not just me. What would be the best way to go about? New router, bring modem to cable company? or is it something I can fix myself.
 

Relevancy 71.38%

Hello My Windows desktop computer suddenly cannot get No connection internet? Cannot - the access get area network on local on the internet It's connected via an ethernet cable and was working fine until this morning It says it is connected to an quot unidentified network quot which is public but that there is no network access When I look at the local area connection's settings it says no network access for both IPv connectivity and IPv connectivity Activity says packets are being sent but not received nbsp ipconfig all results are posted below Windows IP Configuration Host Name user-PCPrimary Dns Suffix lt blank gt Node Type hybridIP Routing Enabled NoWINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Broadcom Netlink No network access local area connection - Cannot get on the internet? Gigabit EthernetPhysical Address - - -C - - DDHCP Enabled YesAutoconfiguration Enabled YesLink-Local IPv Address lt not sure if necessary to post gt Autoconfiguration IPv Address - Preferred Subnet Mask Default Gateway lt blank gt DHCPv IAID lt not sure if necessary to post gt DHCPv Client DUID nbsp nbsp lt not sure if necessary to post gt DNS Serves nbsp nbsp lt not sure if necessary to post strings of numbers letters gt NetBIOS over Tcpip enabled Tunnel adapter isatap and Tunnel adapter Teredo Tunneling Pseudo-interface both say media state is disconnected I can type out the ipconfig results for those if it's necessary Would've posted a photo but didn't feel like waiting for a verification so hopefully it's easy enough to read the results Any help would be appreciated Thank you

https://social.technet.microsoft.com/Forums/en-US/62aeaf66-d143-4040-be4a-e3ed1552afee/no-network-access-local-area-connection-cannot-get-on-the-internet?forum=w7itpronetworking
Relevancy 71.38%

A few days ago I arrived to Germany to a study for a semester. In the house where I'm staying there's a modem with a Lan Cable that I'm supposed to use. I plugged it the day I arrived and I notices I had no Internet connection. After running a few diagnoses the system told me that "Local Area network" doesn't have a valid IP configuration. I don't know why this message appears and why can't I connect to the Internet. I've checked so many forums and I'm starting to believe there's no solution to my problem.
I've checked that the IP is in automatic configuration and I've also tried to connect with other modems what I obtain the same result....
PLEASE HELP ME, I will fail all my courses without Internet

A:Local Area Network doesn't have a valid IP configuration

You might need to power down the laptop, then power off the modem. Keep the modem powered off for about 30 seconds then power it back on. let the lights cycle through until you see connectivity on the modem, then (After plugging the ethernet cable into the LAN slot) power the laptop back on.

If it still doesn't work, you may want to check for Antivirus/Security software/Static Ips.

http://www.sevenforums.com/network-sharing/185495-local-area-network-doesnt-have-valid-ip-configuration.html
Relevancy 71.38%

greetings from South Africa,
I am very new to forums and do not know the correct protocol.
So be gentle with me?
I have a KM4AM Motherboard and the drivers etc.
I bought and installed two LG super multi DVD drives.
When connecting it up I noticed that there was a cable connected to the old secondart CD dive and appeared to go to the motherboard??
I do not know if I unplugged it - however I get the title of my thread when I boot up.
It says 'new found hardware' - Parrallel device'

Any suggestions please
 

A:Local area connection. A network cable is unplugged

The "Parallel" device is the port driver for your LG DVD drives. You have 2 parallel ports on the motherboard. The blue port is for IDE hard drives. The white port is for your IDE (parallel) DVD drives. How are you connecting to the Internet? The "Local area connection. A network cable is unplugged" message indicates that there is no network cable connected to the motherboards network port. Your Cable or DSL modem attaches to this port
 

http://www.techspot.com/community/topics/local-area-connection-a-network-cable-is-unplugged.134325/
Relevancy 71.38%

I uninstalled all network adapters trying to fix another issue but now my LAN network doesn't work,
what is the best way to restore network adapters and previous local area connection ?

http://www.tenforums.com/network-sharing/60011-i-uninstalled-all-network-adapters-cant-get-local-area-connection.html
Relevancy 71.38%

Hi, my intenet status is disconnected and while doing a diagnose the problem is Local Area Network doesn't have a valid IP configuration. Earlier everything was fine, but it happened right after a power outage due to really bad snow weather. I mean outside is bad. I can't do any browsing on my computer or anything and this is the only computer I have. I'm posting this thread using my iPhone. I do have a wireless router but I don't have a wireless card in my PC, and my router is wired to the modem. I'm using Windows 7 Home Premium Anytime Upgrade 32-bit x86. I can't post the CMD results from my computer on here, so I would need to type manually, but I'm not sure what info someone needs to know to provide me support. Thank you!
 

Relevancy 71.38%

Sorry for poor English....!!!

I have 2 LAN cards installed in my Core2Duo;
1. Intel(R) PRO/100 VE, and
2. RealTek

but only one shows up in "Network Connection" that is "Intel PRO/100 VE" (which is named as "Local Area Connection 2"), which is working fine.

Green LED light shows up when I plugged the Ethernet cable into RealTek NIC, but still the Local Area Connection isn't there only one is present that is Local Area Connection 2... initially it used to show both...

The "Network Adapters" in Device Manager, doesn't show any RealTek Drive or any Exclamation ICON, but do shows "Intel PRO/100" without Exclamation, so it is working fine...

how to enable both LAN cards in Network Connection... Pls. guide for the same...

Thank you

Regards

Hari Om

A:Local Area Connection not showing in Network Connections

Hello Hari Om, and welcome to Seven Forums.

Do you have the drivers installed for the RealTek LAN card?

http://www.sevenforums.com/network-sharing/319566-local-area-connection-not-showing-network-connections.html
Relevancy 71.38%

I know there are many threads about this issue. There have been no answers that have been helpful.

OS: Running Windows 7 Home Premium 64 bit on Laptop and PC (custom build).
Router: ASUS RT-N56U
Switch: D Link DES 1008e
Network Adapter PC: Realtek PCIe GBE Family Controller
Network Adapter Laptop: Realtek PCIe FE Family Controller


When either is plugged directly into the router, no ethernet cable is detected. If you run either the PC or laptop through the switch first, it works just fine.

I have uninstalled and re-installed network drivers, I've unistalled and deleted the adapters and software and started from scratch. I've checked all of the setting 3 times over. I just can't seem to figure it out.

Am I missing something very simple here?

A:Local Area Connection Network Cable Unplugged

When you plug directly into the router, did you then power cycle the router and computer?

http://www.sevenforums.com/network-sharing/249796-local-area-connection-network-cable-unplugged.html
Relevancy 71.38%

Hey guys,
todays been a frustrating day. i am running win 7 and my LAC says "unidentified connection" no internet access. i can still connect wireless to other connection. i've searched online tried all kinds of things but they don't work. i am running comcast broadband connection through a marvel yukon ethernet. any ideas would be greatly apreciated. this is very important. i can't get my work done from home anymore!

thanks
nik

A:Unidentified Network-no access to local area connection

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.


Windows IP Configuration


Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : TRENDnet
Link-local IPv6 Address . . . . . : fe80::cd60:97c9:f106:e75%12
IPv4 Address. . . . . . . . . . . : 192.168.10.110
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.10.1

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : hsd1.mi.comcast.net.
Link-local IPv6 Address . . . . . : fe80::b81e:d21b:cabf:1755%11
IPv4 Address. . . . . . . . . . . : 71.227.81.255
Subnet Mask . . . . . . . . . . . : 255.255.248.0
Default Gateway . . . . . . . . . : 71.227.80.1

Tunnel adapter Reusable Microsoft 6To4 Adapter:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter 6TO4 Adapter:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 14:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 21:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 17:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 12:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 20:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 23:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 24:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 25:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 13:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 18:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 28:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 15:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 27:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 16:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 29:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 30:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 32:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 31:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific ... Read more

http://www.sevenforums.com/network-sharing/220689-unidentified-network-no-access-local-area-connection.html
Relevancy 71.38%

in my office 50 pc's running on local area network me & my friend working on there it department i want our 2 pc's drive password protected how can i do it (drive protect not folder)

A:drive password protected on local area network

Hello ,

have you tried to put a password on the whole account & making it private so only you will have access to your files & if they are really private then you can zip file them & put a password on the zip file

http://www.techsupportforum.com/forums/f10/drive-password-protected-on-local-area-network-313020.html
Relevancy 71.38%

Hi, im new to this website because recently my laptop has been totally reinstalled and I cannot seem to connect to the internet. Im not exactly sure what info I need posted so please respond to tell me . When I go to Control Panel>Network and Internet>Network Connections it shows only one connection which is my Local Area Connection which right below it state Network Cable Unplugged. I am currently using an older laptop.
Local Area Connection Properties:
Connect Using: JMicron PCI Express Gigabit Ethernet Adapter
Computer Information:
Windows Edition:
Windows 7 Home Premium
Service Pack 1
System:
Processor: Intel(R) Core(TM) i5 CPU M 430 @ 2.27 GHz
Installed Memory (RAM): 8.00 GB (7.86 GB Usable)
System Type: 64-Bit Operating System
 

A:Local Area Connection (Network Cable Unplugged)

How did you have the laptop re-installed - using a recovery CD or other CD

sounds like you need all the drivers - probably starting with the chipset

whats the make and exact model of the laptop - should be able to get the drivers from the manufacturers website

can we see a device manager screen shot
------------------------------------------------------------------------
Device Manager

Please Post back the results in device manager as requested below

You will now need to take a screen shot and copy that back to the working PC.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the screen shot and attach the screen shot in a reply on the forum here.
If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

how to access device manager for different windows versions
http://www.computerhope.com/issues/ch000833.htm

Hold the Windows key and press Pause key, should open to allow device manager to be seen, see the menu on the left hand side

on a laptop you may need to use Hold the Windows key and press FN key + the pause key

If the above does not work then

For Windows 7 or Vista
Click on the Start Orb > In the Start Search box type > device manager and then press enter
or
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
start > control panel> System and Security> Device Manager
​For Windows 8
If you happen to be using a keyboard with Windows 8, the quickest way to open Device Manager is via its shortcut on the Power User Menu, accessible by pressing the WINDOW key and the X key together.
If on a touch screen - have a read here http://pcsupport.about.com/od/windows-8/a/device-manager-windows-8.htm
​Once you are in device manager then navigate to:

network adaptors, click on the + > post back the devices that are listed under network adapters
are there any yellow ! ? or a X​
post a screen shot of the device manager - network adapters

To post a screen shot of the active window.
For Windows XP
Hold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
​For windows Vista or Windows 7
you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool
http://www.bleepingcomputer.com/tutorials/how-to-use-the-windows-snipping-tool/
​For Windows 8
you can use the snipping tool > Open Snipping Tool (From the Windows 8 Start Screen, type "snip" and press enter.
>Press the Esc. key.
>go back to your Windows 8 start screen - Swipe from left or press Window Button
>Press Ctrl+PrntScr button to use Snipping Tool
http://www.bleepingcomputer.com/tutorials/how-to-use-the-windows-snipping-tool/

To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.
Full details are available here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot
 

https://forums.techguy.org/threads/local-area-connection-network-cable-unplugged.1114000/
Relevancy 71.38%

Can this be done on the win7 machine? I have a Comcast SMC. Do I have to do this on the router?

A:How to make Windows 7 Pro only see local area network, not internet?

Hi there,

If you don't want your computer to have internet access and only see the LAN or have access to the shared network resources, you may remove the Gateway and DNS'es from your LAN or WLAN settings. See the image below. This is just an example, your Subnet might be different than mine. If you need a step by step guide please don't hesitate to ask.

http://www.sevenforums.com/network-sharing/330636-how-make-windows-7-pro-only-see-local-area-network-not-internet.html
Relevancy 71.38%

Trying to connect Lenovo 3000 G430 4152 Laptop using windows 7 32 bit to a wireless network

Wifi lists the available wireless networks but fails to connect. However, this laptop gets connected to
Internet through dongle. And another laptop gets connected to this home wireless setup with no hazzles.

Coming to this problematic lenovo laptop: there was no problem connecting this laptop through wireless a few days back but today it is giving this trouble - Network connections tags Local Area Connection as "Network Cable Unplugged"

I've downloaded drivers from Lenovo website, but no result.

Attached screenshots.

Thanks for your help!

A:Local Area Connection Network Cable Unplugged

Hi...I did try solutions provided here in this forum but the issue remains...

I made changes to speed option of LAN adapter to 100 full duplex and Awol too 100Mbps

Any other working solution might help...

I want this laptop to use wireless network

appreciate your help buddies...thanks!

http://www.sevenforums.com/network-sharing/303437-local-area-connection-network-cable-unplugged.html
Relevancy 71.38%

Hi Team,

I have a problem with my Local Area Connection. I have installed the driver correctly and can access the internet also. But when I go to Open Network and sharing center -> change adapter setting -> I can not see Local Area Connection icon appear. My OS is windows 7, HP System.

A:Local area connection is not showing in network properties

Welcome to Seven forums mail.

Can you please post a picture of Device manager and a picture in the adapter settings where your local area connection should be?

http://www.sevenforums.com/network-sharing/331350-local-area-connection-not-showing-network-properties.html
Relevancy 71.38%

Hey guys My internet provider has just recently been switched to Time Warner Cable They came by and hooked everything up to my desktop and my internet worked for that day The next day I had to call technical support and road runner services because my computer says I m connected but I m not sending nor receiving area Missing network connection and local controller any packets Road Runner took me through Device Manager where I noticed a big yellow question mark near Other Devices Network Controller Also after going through my Network Connections there s no Local Area Connection listed The techs responded that they couldn t help me unless I fixed my computer software I have already tried going through Computer Management and checking Plug And Play Services amp RPC Missing network controller and local area connection Services Any other suggestions are much appreciated I m currently working off of my laptop because I can t get online with my desktop Any requested information would just Missing network controller and local area connection be done by my usb flash Missing network controller and local area connection drive Thank you so much for your time nbsp

A:Missing network controller and local area connection

Open device manager. Uninstall those device with ? on them. Reinstall drivers for your network adapter.

What devices are listed under network adapter?
 

http://www.techspot.com/community/topics/missing-network-controller-and-local-area-connection.174762/
Relevancy 71.38%

quot Local Area Connection Network not connected quot is the annoying little bubble that pops up on my screen everytime I turn on my computer And sadly it Area Solved: Local wha-wha-wha-?! Network connected... Connection not stays there I recently moved to a new apartment my internet connection was Solved: Local Area Connection Network not connected... wha-wha-wha-?! fine when I arrived One week later and I m screwed up the wazoo The facts are as follows I ve been living in a community that receives free internet service courtesy of Pavlov whatever that might be- However anything named after such a sadistic dork I should probably be wary of right In my first apartment here I had issues registering w the service as for some reason my computer refused to accept the connection initially I called local maintenance and a smart young lady w the computer center arrived worked her voodoo and left me w internet It was good When I moved I simply moved from one building to another in the communtiy After I moved my Solved: Local Area Connection Network not connected... wha-wha-wha-?! internet worked fine for a week and a half In that time there were two large storms One noticeably knocked out power but not to my room The other occured the day before I discovered this annoying little message of disconnection and called Pavlov Tech support They walked me through an entire process of checking my IP address and renewing my connection and everything --Didn t work if you couldn t tell They promised to send out a technician who was to arrive in three business days I m still waiting over a week later I called the local maintenance people w in the community They brought in a technician who changed out the hub in the room poked around on my computer and then told me I needed to buy a new ethercard due to the storm frying it I had the sneaking suspicion he hadn t a clue what he was talking about because he kept asking me about lights blinking on the back of my computer- The back of my computer has never HAD lights Not only that my computer wasn t even ON during the storm AND it has a surge protector I came here looking for answers found many none are the right one I ve tried disabling the connection it just disables the connection I ve tried deleting the connection it won t let me do that I ve tried running all my virus detection programs and it tells me I m clean oh happy day but still no connection I m at the end of my rope What the heezy is going on here Is that crackpot actually right about a new ethercard or is it something I should be able to fix Please a little guidance if you will Btw ipconfig all Media disconnected -The community s due to go wireless soon but upon receiving the error they stated that hadn t yet set up anything in relation to the network Thank you nbsp

A:Solved: Local Area Connection Network not connected... wha-wha-wha-?!

https://forums.techguy.org/threads/solved-local-area-connection-network-not-connected-wha-wha-wha.498335/
Relevancy 71.38%

Hi guys, i have recently received a message telling me that a network cable is unplugged. Usually i have this problem with local area connection 2, but it always resolves itself while this one does not. I have tried unplugging my dlink and plugging it back in. please give me any suggestions! Sorry if this sounds dumb to you, much appreciated!
 

A:Local Area Connection [A network cable is unplugged]

Are using a laptop or desktop, if your on a laptop will say that because your not plugged in the LAN on your laptop which you do not need if it is wireless, but if it is your desktop and you are connect to your router it could be that the NIC card is at fault go into device manager to see if there is any problems with NIC card.

1.Also check your network cables make sure they are in secure.

2. Make sure your network adapter is up to date and working.
 

http://www.techspot.com/community/topics/local-area-connection-a-network-cable-is-unplugged.159744/
Relevancy 71.38%

OK. Here is my problem. I had a power surge which killed my windows XP install, so based on advice received here, I was able to re-install XP and was good to go for a week or so. Suddenly, I keep getting messages which read LOCAL ARE CONNECTION 3- A NETWORK CABLE IS UPLUGGED. There is a red x which appears and I am unable to connect to the internet. I contacted VERIZON FIOS and they walked me through a series of steps, but it doesnt work.
I changed the cable and I ran a new cable directly to the tower, and bypassed the router.
What do I need to do> Any suggestions>? I have a 3Com Gigabit LOM (3c940) whatever that is and I dont know how to maintain NETWORK CONNECTIONS.

So, I used to be kicked off the net, and now I cant even get ON the net....

ANY TIPS????

Thank You
Ron DeRenzo
 

Relevancy 71.38%

Hello everyone This is my first post I m looking forward to becoming a member of this community Here is my problem I m working on a Windows XP Desktop Dell which is connected to a cable modem using an ethernet cable I also have a Windows Vista Notebook HP which connects to the Internet my secure network wirelessly I use Time Warner Roadrunner as my ISP A month or so ago Time Warner contacted me and asked if A Connection: Unplugged Local Area Cable Network is I wished to quot upgrade quot my Internet service speed for a nominal fee I think it was per month As I am self-employed and frequently upload download large files for my business I decided that this was worth the expense So I agreed to make the upgrade which was done entirely on their end by resetting my modem whole Local Area Connection: A Network Cable is Unplugged process took about seconds Since that time I Local Area Connection: A Network Cable is Unplugged ve had nothing but problems with the wireless connection on the Notebook Any time I attempt to download a large file on to that computer again all done wirelessly the download fails and I lose my Internet connection on that unit e g the small globe icon in system tray which indicates that I am connected to my network disappears and is replaced by a red x or the yellow alert icon At the same time this occurs I get a notification on my desktop PC the one that is connected using the ethernet cable stating Local Area Connection A Network cable is unplugged The outage usually lasts for anywhere from seconds to minutes before restoring itself I have double triple and quadruple checked all of my connections and I can assure you that nothing is unplugged Two calls to Time Warner have yielded little along the way of information or results The first time I called I was told by a snippy tech rep that quot obviously one of your cables it unplugged quot The second time I called I was told that the network card in my desktop was going bad and I needed to replace it Although the second explanation sounds a bit more plausible than the first I remain suspicious Why is it that this problem first manifested itself within hours of my upgrading my Internet speed It never occurred so much as once prior to the upgrade And why does the problem NEVER occur not even once when I am downloading files to my desktop And why do I get errors on BOTH machines when I am attempting to download large files to the wireless machine only A friend who is hardly an expert but who is somewhat in the know seems to think that the problem lies not within the network card but with the ethernet cable itself that it may not be a good enough quality to handle the higher Internet speed He suggests buying a new ethernet cable and seeing if this remedies the problem I m not opposed to that solution but I d like to get other opinions before doing so Thanks so much Mister Winter nbsp

A:Local Area Connection: A Network Cable is Unplugged

First, be sure to update the firmware in the router, the NIC drivers for your wired connectons, and the wireless WiFi driver.

Brand names and model numbers for all network devices may help here.

I've seen cases where this symptom occurred due to the speed of the connection
and as you have just upgraded your network capacity, this may apply to you.

Broadcom 10/100/1000 adapters (and likely any gigabit adapter) set at 1000 flood the simple router and cause it to drop connections.

First try setting 100mb, full duplex and if it is stable stop here

Next try setting 100mb, half duplex and then move to

10mb half duplex.





And why does the problem NEVER occur (not even once) when I am downloading files to my desktop? And why do I get errors on BOTH machines when I am attempting to download large files to the wireless machine only?

A friend?who is hardly an expert, but who is somewhat in the know?seems to think that the problem lies not within the network card but with the ethernet cable itself..Click to expand...

If the wired desktop can run fine, the the cabling is not in question.
The download via the wireless will run much slower than the wired connection
and cause the router to back off -- the speed capacity up to the router is far
greater than the wifi and the problem is in the speed mismatch.

On my Netgear router, I can set the MTU size on the WAN Setup page.
You should have something <= 1500. Personally I use 1492.
 

http://www.techspot.com/community/topics/local-area-connection-a-network-cable-is-unplugged.110616/
Relevancy 70.52%

I have no Local Area Connections showing up in my Network Connections folder. I have an operational network connection via the ethernet port on my HP pavillion running Windows 7 Ultimate and the icon shows up in the status bar. I have no way of copying and modifying it.
My connections for my home group shows a blank although I am connected.

What has happened to the Local Area Connection icons, display data? More importantly how do I restore it?

I was trying to connect to a piece of equipment and discovered that I could not locate the local area connections to copy and create the required communication specifications.

Thanks
Steve

A:Local Area Connection Missing from network adapters but operational

Could you post a screenshot of what is available in your network connections so that I can better identify your issue.

Could you go to device manager and then check if there are any red X's by any devices. If so please post back your results

To access device manager please open the attached folder and then open the file to view the steps.

Many Thanks,
Josh!

http://www.sevenforums.com/network-sharing/295312-local-area-connection-missing-network-adapters-but-operational.html
Relevancy 70.52%

For over years I've run the same network in my home My personal computer receives it's signal from a custom-built antenna with attached ampliflier which gives my internet signal directly to my machine the internet source is from my parents' house I live in a neighboring home The internet on my machine works just fine like usual however I recently went on vacation and took my computer with me and upon return my network now fails I used a direct ethernet link for internet during this vacation This situation has happened before but I previously fixed this problem with a system restore this is no longer an option because I don't have the option to restore to a point before I was gone on vacation When I say this happened before I mean everything about this problem is identical to the time I encountered it last that my network router remained visible and the internet worked on my main computer but the router wouldn't 'take' the signal and broadcast it properly The problem as best as I can understand is this the router is visible and is directly connected to my personal computer however failure/Network issue down address Connection Local IP Area there is no Local Area Connection IP address failure/Network down issue internet signal when connecting to the router via phone laptop etc The only message that suggests something is wrong is the following Local Area Connection does not have a valid IP configuration When trying to connect with her laptop my girlfriend received this message and also when trying to diagnose my local area connection I received the same message about the IP address being invalid for the Local Area Connection What could be wrong When this happened before my friend who works in IT explained that since normally you receive internet from routers and not vice versa I'm trying to get my router to broadcast the internet signal that my computer already has that the diagnostics behind it can be difficult and thus only did a system restore I'm completely in the dark as how to fix this Nothing is wrong hardware-wise I am sure of this I read about trying to reset ip settings for ipv ipv through cmd but nothing has worked so far ------ System specs updated

A:Local Area Connection IP address failure/Network down issue

Please fill out your system specs. Click on the link in my signature to do it.

http://www.sevenforums.com/network-sharing/243510-local-area-connection-ip-address-failure-network-down-issue.html
Relevancy 70.52%

I moved into a family apartment and had my landlord hook up my at cable network Local area random unplugged intervals Toshiba Windows laptop to his Lynksys wireless router that everyone in the house is using He gave me a Lynksys USB wireless card also which worked well I was able to connect to the Internet with no problems Last Local area network cable unplugged at random intervals week I had the IT guy at my work hook up a remote desktop server to my computer so I could access my work files from home My work files are not wirelss When I brought my computer home that night I started it up and was on the Internet for about minute when it kicked me offline and then the LAN computer icon on the bottom said quot Network cable unplugged quot Every minute or so the X s on the LAN computer icon go away and it says quot plugged quot again This will last for about seconds and then it becomes unplugged again I think Local area network cable unplugged at random intervals the IT guy changed a setting that kicked me off the wireless router but don t know how to switch the settings back Please help I m not sure if the IT guy even knows what he did nbsp

A:Local area network cable unplugged at random intervals

Firewall

Software that accesses remote (sometimes mainframe) files often needs exceptions (changes) to the firewall. Your IT guy will either have to do it or give you the directions as to what to enable.
 

http://www.techspot.com/community/topics/local-area-network-cable-unplugged-at-random-intervals.101680/
Relevancy 70.52%

Dear friends, I would only like to know if and how I can "use" Hp Support Assistant in my desktop pc at office, because my desktop pc itself works within a local area network with proxy authentication. Thanks a lot, Paolo ([Personal Information Removed)

http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/Hp-Support-Assistant-and-Local-Area-Network-with-Proxy/td-p/5743595
Relevancy 70.52%

On my other computer I am running Windows XP and I cannot connect to the internet, I have factory restored the computer and am having problems conneting to the internet. It shows the "Local Area Connection" Icon is missing and that there is no "Network Adaptor" So it would be nice if someone could help out.

-Thanks.
 

Relevancy 70.52%

Hi No Unidentified Network; LAN/Wired Connection Area Internet - Local Guys I have been experiencing this issue since days ago year on and was having no problems I am currently using a LAN/Wired Local Area Connection - Unidentified Network; No Internet Dell Studio XPS Windows -bit I am able to connect to the internet via wifi however to no avail with my LAN connection I have tried the basic stuff like changing LAN cables testing connection with other Windows Vista XP laptops and they worked except for mine I have tried methods posted online such as the netsh winsock reset disabling IPv setting static IP for IPv etc However none has worked for me Below is my ipconfig all Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users Christopher Koh gt ipconfig all Windows IP Configuration Host Name ChristopherKoh Primary Dns Suffix Node Type Broadcast IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List nus edu sg mshome net Ethernet adapter Local Area Connection Connection-specific DNS Suffix nus edu sg Description Broadcom NetLink TM Gigabit Ethernet Physical Address - - -F -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ed ea c Preferred IPv Address Preferred Subnet Mask Lease Obtained Friday September AM Lease Expires Friday September AM Default Gateway fe d c cf f d fe b c b e bf fe e d aa DHCP Server DHCPv IAID DHCPv Client DUID - - - - -A - F- E- - - -F -C - DNS Servers Primary WINS Server Secondary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix nus edu sg Description Intel R WiFi Link AGN Physical Address - -FB- B- -C DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe a b be f a e Preferred IPv Address Preferred Subnet Mask Lease Obtained Friday September AM Lease Expires Friday September AM Default Gateway fe e af bf a a fe d a c eafd fe b a c b db fe a d d d b fe d ef ef da c DHCP Server DHCPv IAID DHCPv Client DUID - - - - -A - F- E- - - -F -C - DNS Servers fe a c cfe a Primary WINS Server Secondary WINS Server NetBIOS over Tcpip Enabled Connection-specific DNS Suffix Search List mshome net Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address e f a b bfa Pref erred Link-local IPv Address fe f a b bfa Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap nus edu sg Media State Media disconnected Connection-specific DNS Suffix nus edu sg Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Can anyone help me

A:LAN/Wired Local Area Connection - Unidentified Network; No Internet

You should automatically obtain your ip address, dns, and gateway, unless directed otherwise by your isp.
Did you "power down/power up" your cable modem and wireless router?
Check to make sure you have the latest driver for your network card.
Can you ping an ip address? Can you ping the router? Can you connect to the router?
Do you have to contend with a firewall from the National University of Singapore?
Researching more. Let me know about this...

http://www.sevenforums.com/network-sharing/113193-lan-wired-local-area-connection-unidentified-network-no-internet.html
Relevancy 70.52%

I recently upgraded a Windows 2000 PC (with an ASUS P4PE-800SE board) to Windows XP Pro. We have a Raid array (FastTrak TX2) and are using an onboard network adapter (Marvell 1207F). The internet and network connection work fine, however there is no icon for local area connection in Network Connections, and there is also no 1394 connection. The Device manager shows that the device is working properly, and the driver is an up-to-date version.

I have tried the fixes listed on Microsoft's site about this problem to no avail. The user needs to be able to manager her own network connection and is incapable or unwilling to use the Netsh command line interface. Please help.

A:Local Area Connection Icon in Network Connections missing

Are you saying that if you click Start, Network Connections, nothing shows?

Or do you mean the Task Bar icon?

http://www.techsupportforum.com/forums/f10/local-area-connection-icon-in-network-connections-missing-454468.html
Relevancy 70.52%

l have windows 2000 and l keep getting local area connection network cable unplug
 

Relevancy 70.52%

I have a Dell Studio vista laptop I also have TWC and this particular laptop is wireless yet the local area connection network cable says unplugged broadcom netlink I know it is wanting a ethernet cable plugged in but it is a wireless laptop so why would I plug a cable in I also have a Dell E desktop that is hard wired into TWC with a Arris tg g modem that belongs to TWC I have no problems with the desltop hardwired but the laptop wireless downstairs continues to lose wi fi and or connections it shows speed and has at lest to bars but it cable question Local network connection area unplugged still goes in an out I called to have TWC come and check it out for me but they will not do it Said they do not work on computers but I thought maybe their installation went wrong But no advice This has been going on for a long time and I get so fed up paying the bills but getting cable internet in return Does anyone on the forum have the same problems Thanks for your help

A:Local area connection network cable unplugged question

Welcome,

Your laptop has the ability to use either a wireless connection or a wired connection. Typically not both at the same time.

You should disable the wired adapter to not see the cable unplugged indication.

Right click on the network icon in the notification area and select Open network and sharing center.

Then select change adapter settings on the upper left side of the window.

Right click on the Ethernet adapter (Local area connection) and select disable.

http://www.sevenforums.com/network-sharing/390423-local-area-connection-network-cable-unplugged-question.html
Relevancy 70.52%

Hi thanks for looking,
I have just recently reinstalled windows. When I plug in the lan cable, no LAN connection comes up. I have never had this problem before and usually just doing this will allow me to have internet.
Whats wrong? How can I fix?

Thanks
 

A:Local Area Network (LAN) connection isnt showing up in connections

It needs a Driver. You'll need to visit the Motherboard Manufacturers website & download the driver for your model board.

Before you go there, look in Device Manager {control panel / system /hardware} and see if anything else has an exclamation mark - they'll require drivers too!
 

http://www.techspot.com/community/topics/local-area-network-lan-connection-isnt-showing-up-in-connections.94222/
Relevancy 70.52%

Local Area Network is not showing in my Dell Inspiron N5010. I have manually installed Windows 7 ultimate 32bit from my CD because my lap came with DOS OS. I have installed network driver, ie RTL8103T Ethernet Controller from dell site, but still lan icon is not appearing. Please help me.. I am trying to fix this issue since 6 hours...

A:Local Area Network is not showing in my Dell Inspiron N5010

Try the following.Right click on computer and select manage.A window will pop up and choose device manager from the left pane.From the Device Manager window click an icon on the top panel (if you hover your mouse the icon will say "scan for hardware changes").Click on that and let windows choose the relevant drivers for your network adapters.

http://www.sevenforums.com/network-sharing/259490-local-area-network-not-showing-my-dell-inspiron-n5010.html
Relevancy 70.52%

Hi Guys,

I have a question if there is a way to hide the "local Area Connection" icon in the Change Adapter Settings window.

We do not want the regular users changing settings that they do not understand. Of course this is for Windows 7.

A way to do it via Group Policy would be benefitial.

Thanks in advance.

Jason

A:Hide Local Area Connections Icon in Network Sharing

There is a setting in group policy editor that can disable any Users ability to work with the LAN connections settings. There are over 2000 settings but it's hard to say exactly which one you want unless you look them all over and test them out to see the effect they have.

For this particular setting go to "User configuration"> Admin templates>All settings>Near the top of the list choose "Ablity to enable or disable a LAN connection", then enable or disable it depending on what you want.

http://www.sevenforums.com/network-sharing/106897-hide-local-area-connections-icon-network-sharing.html
Relevancy 70.09%

I can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1. Any ideas?

More info:

ip config /all
netstat -n
ping&tracert 192.168.1.1
 

A:Solved: Can't connect to internet but Local Area Network is sending packets

https://forums.techguy.org/threads/solved-cant-connect-to-internet-but-local-area-network-is-sending-packets.986478/
Relevancy 70.09%

Recently, I've found that the Local Area Connection icon is missing from my Network Connections folder, but my connection still works. However, I cannot run my system on my WRT54G Linksys router (Yes, it sucks, I know), and as I have multiple systems in the house, this is a problem.

As it stands, I can run directly off the cable, but not when connected to the router. I cannot edit my connection settings. I've tried several microsoft fixes, such as the ones here:

http://support.microsoft.com/kb/254631/
http://support.microsoft.com/kb/269019/

If anyone has any other help, it would be greatly appreciated.

A:RESOLVED Missing Local Area Connection icon in Network Connections

Maybe something here may help http://www.kellys-korner-xp.com/xp_abc.htm.

http://www.techsupportforum.com/forums/f10/resolved-missing-local-area-connection-icon-in-network-connections-161848.html
Relevancy 70.09%

There was lightning near my house today when it struck the power went out for a second and when it came back the Internet didn't work. And my network says Unidentified Network and when I troubleshoot it I get "local area connection" doesn't have a valid ip configuration. I'm not really sure what to do, I hope it isn't but it kind of seems like a hardware problem but I don't know enough to say so

A:Unidentified Network local area connection doesn't have valid ipconfig

If you have a cable modem, unplug power from it for about 2 minutes. Then power it up again. If you also have a router, unplug power from it for a short time, then power it up again. Then re-boot your computer. Let us know if this works. Who is your internet provider ? You may have to call them to do an electronic reset.

http://www.sevenforums.com/network-sharing/292347-unidentified-network-local-area-connection-doesnt-have-valid-ipconfig.html
Relevancy 70.09%

I need help.
My local area connection is missing even the network adapters in the device manager.. While using our desktop, i noticed that the electricity flickered( once) then my internet connection disappeared.. so i had to go to network and sharing center and manage my connections. i disable and enable my local area connection and can't still connect.. so i restarted my PC and then boom.. Local area connection missing, so i had to search the net using our laptop. then even in the device manager the network adapters are missing.. i also re install its drive, used system restore.. still failed..

Motherboard: Asus P8H77-M LE
Processor: i7 3rd gen
Video card: NVDIA

A:Local Area Connection and Network Adapters in Device Manger is Missing

Welcome axionman,

Have you tried re-booting your cable modem & router if you have those ?

How do you connect to the internet ? Your service provider ?

http://www.sevenforums.com/network-sharing/291231-local-area-connection-network-adapters-device-manger-missing.html
Relevancy 70.09%

Hey i am having problems connecting to Xbox live because it has no internet access and i have tried lots of things and nothing is working. here is the story behind it.... i had tried connecting many times before but it wouldn't work but one day i tried and i changed sharing on something (IDK what i forgot) and it worked so i had live for a couple of days. then one day my bro was online and the power went out in the house for a while, the next day i tried to connect and it wouldn't... on the when i plug in xbox ethernet to computer it says unidentified network on internet access. so can you help me connect thank you I got a cricket broadband modem on the usb

A:local area connection unidentified network no internet access Xbox

Joooooel> Can you tell us exactly how you have your network setup.

How the internet is coming in?: Your Internet Coming in? Is it going to another computer or to a Router?: Is the XBox Wireless or Hardwired?

Give us as much detail as possible.

http://www.sevenforums.com/network-sharing/153265-local-area-connection-unidentified-network-no-internet-access-xbox.html
Relevancy 69.23%

Please Help me! After running my malware anti-virus and removing all the virus, my Local Area Connection keeps saying network cable unplugged. I checked the network adapters and everything is fine. When I did an ipconfig, there's no ip address showing. I have Windows XP. I've tried almost everything and it's still not working. What could be causing this problem? I've been working on this for days. Any help is greatly appreciated.
 

A:Local Area Connection-Network Cable unplugged - Internet not working after virus

Hi: When you say no ipaddress do you mean it is all zeros or 169.xx ?
If all zeros here are some things to investigate:
IP Addresses all O&#8217;s
IP addresses of all zeros are normally caused by one of the following.

Diagnosis:
1. DHCP Service not running.
2. Duplicate IP address on the network.
3. Bad NIC card drivers.
4. Defective NIC hardware.

Resolution:
1. Check Control Panel, Administrative Tools, Services. The DHCP Client service should be Started and its Startup Type should be Automatic.
2. Turn off ALL of the computers and other network connected devices, restart (power cycle) the router, then restart all the computers and other network devices.
3. Check for upgraded drivers and/or reload the Network drivers.
4. Replace the Network Interface Card.
.
If this is a wireless connection:

There has also been at least one case where switching from using Dell WLAN to XP&#8217;s WZC resolved the issue.
 

https://forums.techguy.org/threads/local-area-connection-network-cable-unplugged-internet-not-working-after-virus.1014604/
Relevancy 69.23%

I had Dell over today. They replaced the mother board and I am having the same problem. Wireless works fine. Wire to NIC card says unplugged and enabled (blinking) I can't get it to work.
Dell then told me it may be software and asked me to reload XP... I did that too, a full install... took me all night to get this laptop D600 Latitude back to normal. I am still getting this blinking thing under network connections. Local area connection (status) blinkes Network cable unplugged and enabled. I am using a known good cable. I rebooted modem, computer and did all I can do.
Have any ideas? Wireless works fine but daughter has a weak signal at college and needs direct connect.

Thanks,
Steve
 

A:Local area connection (status) blinkes Network cable unplugged and enabled.

When the motherboard was replaced, was the NIC driver re-installed?

Since its a laptop, is the NIC integrated with the motherboard, or is it a seperate card?

In Windows Device Manager, are there any question marks or exclamation points next to the NIC / Ethernet Adapter?

Since both motherboard and Windows were replaced / re-installed, that takes out a lot of possibilities.
 

https://forums.techguy.org/threads/local-area-connection-status-blinkes-network-cable-unplugged-and-enabled.410008/
Relevancy 64.5%

Hey, so I have a problem and although i'm terrible at describing computer problems I'll give it my best shot. So one day I turn on my HP Pavilion dv6000 with Windows Vista x64 Ultimate and the internet would not work and it had been the previous day. The wireless connection switch is turned on and the light is blue, not orange, but my computer will not detect any networks. My little brother has an HP desktop with the same OS but he is not having problems connecting or finding the network so the problem is obviously internal to my computer. WHen i diagnose and repair it...i get the message: "plug a cable into the network adapter "Local Area Connection"." Again my connection is wireless and i have no idea how to fix this problem. Any help would be greatly appreciated.

http://www.vistax64.com/network-sharing/211407-plug-cable-into-network-adapter-local-area-connection.html
Relevancy 64.5%

how do i do that?
all the computers in my house are connection to the internet except for mine.
help please!

A:Plug a cable into the network adapter "Local Area Connection"

what make and model of computer do you have do you have the user guide if so it will tell you if not need make model etc ie is it a laptop or desk top but this may help the cable you need is called a rj45 it looks like a large telephone plug and their is only one place it will fit so if you have a cable a little trial and error will help find it just do not force anything in anywhere

http://www.techsupportforum.com/forums/f217/plug-a-cable-into-the-network-adapter-local-area-connection-329894.html
Relevancy 64.5%

Hello Please help I have been trying to quot fix quot this issue on my laptop IP Valid Con Area Connection/Wireless a Have Local Solved: Network Connection Doesn't for the past month on and off I have been using other sources to access the internet reading up on resolutions on this issue and all kinds of forums I am knowledgeable but not able to understand some of the fixes and terms that I have come across I feel like I ve tried everything and still I cannot access the internet on my PC wired or wireless I have a Toshiba Satellite L -GS I tried to release amp renew my ipconig Solved: Local Area Connection/Wireless Network Connection Doesn't Have a Valid IP Con Please see below for ipconfig Please help C windows system gt ipconfig release Windows IP Configuration No operation can be performed on Local Area Connection while it has its media disconnected Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Link-local IPv Address fe c ee b d Default Gateway Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter isatap hsd nj comcast net Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter isatap D E -E CD- F - -AE A Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix C windows system gt ipconfig renew Windows IP Configuration An error occurred while renewing interface Wireless Network Connection unable to contact your DHCP server Request has timed out No operation can be performed on Local Area Connection while it has its media di sconnected C windows system gt ipconfig all Windows IP Configuration Host Name jpharvey -PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL SE Wireless LAN n PC I-E NIC Physical Address - -B -B -B - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c ee b d Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - C- C- - - - C- C- -E DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address - - C- C- -E DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap hsd nj comcast net Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap D E -E CD- F - -AE A Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:Solved: Local Area Connection/Wireless Network Connection Doesn't Have a Valid IP Con

https://forums.techguy.org/threads/solved-local-area-connection-wireless-network-connection-doesnt-have-a-valid-ip-con.1016512/
Relevancy 64.5%

Linksys WRT g Wireless router with a Linksys port workgroup switch on my end so that I can operate three computers at my desk There IS an ethernet line plugged into the ethernet port on my new windows vista PC I run primarily windows xp but Plug Area a adapter the network Connection" cable "Local into got stuck with vista Plug a cable into the network adapter "Local Area Connection" on this new beast because they wouldn't sell the package without it My only copy of xp Plug a cable into the network adapter "Local Area Connection" is for dell so I can't install it on an eMachines I won't run windows k on this one because it won't run some of the programs I use So the network is composed of mostly xp and one or windows k computers there are a LOT of computers on this LAN All I want is to get this stinking POS connected again and by again I mean I was playing world of warcraft on it less than hours ago It worked GREAT If somebody could tell me what this CRAP operating system just did to 'FORGET' how to connect to my network I would really appreciate it

A:Plug a cable into the network adapter "Local Area Connection"

I HATE VISTA

I restarted the computer and it ate itself. I'm having to do a clean install 12 hours after getting it set up in the first place.

can somebody help me with this so it doesn't happen AGAIN?

http://www.techsupportforum.com/forums/f217/plug-a-cable-into-the-network-adapter-local-area-connection-213588.html
Relevancy 64.5%

Hello, so I downloaded hamachi the other day to play with some friends on GMOD and I was finished with hamachi so I decided to un-install it, after doing so, I noticed Google Chrome, Mozilla, Steam and many more applications can't connect to the internet, but Internet Explorer 64 bit is able to connect... I don't know how to fix this and I've done a bunch of research on many ways to possibly fix it but none have worked so far... I use a wireless usb for my wireless connection, it works perfectly fine but my Local Area Connection keeps saying that one message and I just wanna fix it :/ please help?

A:Local Area Connection "Network cable unplugged"

and welcome to the Forum

Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found, here's how


Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type or copy and paste the following command:

ipconfig/all > 0 & notepad 0

and press enter.

Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus WiFi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error about a missing function, download and install NET Framework.


To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file. To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here. For Vista and Windows 7, 8 you can use the Windows Snipping Tool

http://www.techsupportforum.com/forums/f217/local-area-connection-network-cable-unplugged-1008882.html
Relevancy 64.07%

Setup We have a server running Win server and each user has an account so they can log into their account using any computer I installed reinstalled Windows XP pro on a computer and installed all the drivers Everything looks okay in device manager but when I connect an ethernet cable I have no internet and it says quot limited address" valid and doesn't Network IP Limited/No "Local a activity Area have no activity quot and I can't access the internet I tried to have windows repair it but then it says quot local area network doesn't have a valid IP address Do I need to be part of the domain and logged in to use the internet Limited/No activity and "Local Area Network doesn't have a valid IP address" Anyways I went into ethernet properties and IPv is not checked V is checked and in the properties for it its set to obtain the IP and DNS server address automatically All the computers are set the same I tried entering the domain information and all that but it doesn't work I took pics of the settings before and it doesn't work when I put it in So I have a couple questions Do I need to be logged in or any computer I plug in should be able to access the internet How do I fix it so I can enter the domain information so I can set it up where I can log into any user from this computer

A:Limited/No activity and "Local Area Network doesn't have a valid IP address"

I want to apologize in advance that I can't get the ipconfig /all information for you right now, since I am away from work for the weekend. Anyway to troubleshoot or give me some ideas to try before I go back into work?

http://www.techsupportforum.com/forums/f10/limited-no-activity-and-local-area-network-doesnt-have-a-valid-ip-address-959801.html
Relevancy 64.07%

i am trying to access internet through sony ericsson naite on Laptop(OS- VISTA). i had installed pc suite for trying to access internet with usb cable and bluetooth. Mobile is properly connect with pc (laptop) but i can't access internet.
when click connect internet option in pc suite i get message "Plug a cable into network adapter "local area connection" or get ip automatically". it try to configure manually and many trick on net, i failed to access net. operating system vista(updated).

Help me with steps please..

http://www.vistax64.com/network-sharing/268312-plug-cable-into-network-adapter-local-area-connection-get-ip-automatically.html
Relevancy 64.07%

I have a Windows 7 Home Premium computer that is not connected to the internet. I have checked the drivers and they are all installed correctly and operational. When I go into the adapter settings there is no Local Area Connection adapter. I have included some screen shots of what I am seeing if they help.

-Chris

A:Local Area Connection missing from network adapters, no connection

Welcome to the Seven Forums.

In that computer management window (while Device Manager is selected in the left pane), select View from the menu bar. Then uncheck View hidden devices. Do you see any Network adapters now?

http://www.sevenforums.com/network-sharing/295663-local-area-connection-missing-network-adapters-no-connection.html
Relevancy 63.64%

I have an HP a f Intel Pentium Dual CPU bit operating system with a NVIDIA nForce Ethernet card and Netgear Wireless-G Router for the Toshiba laptop My internet connection has been working just fine on BOTH computers Recently JUST THE HP will "Local cable internet Plug a network Lost the - Error into Area Connection" adapter not connect to the internet saying quot plug a cable into the network adapter local Plug a cable into the network adapter "Local Area Connection" Error - Lost internet area connection quot I have tried various repairs to diagnose where the issue is occurring and think it might be something to do with an HP update that may have messed something up or a driver issue After taking the router out of the loop trying a new ethernet cable etc I m thinking either drivers port or card I have Windows Vista and have searched various forums and tried several quot solutions quot to no avail Any ideas I am communicating thru my laptop s internet connection so I am limited to the quot Diagnose amp Repair quot options on my HP with NO INTERNET CONNECTION -ruled out router issue -tried different ethernet cords -researched error in System Diagnostics Report Microsoft to adapter is reporting quot tv configMgrErr quot -unchecked ipv internet protocol -several restarts -Network Sharing Center - checked properties of quot local area connection quot Desktop OS Version Microsoft Windows Vista Home Premium Service Pack bit Processor Intel Pentium Dual CPU E GHz Processor Count RAM GB RAM Hard Drives C Free - MB Antivirus Norton Enabled Some updates recently failed due to loss of internet connection C Users Robbi AppData Roaming Microsoft Windows Start Menu gt IPCONFIG ALL Windows IP Configuration Host Name Robbi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description NVIDIA nForce Mbps Ethernet Physical Address - - - - -AA DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap EDD A- - E -B DD- B br Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - E- DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description TO Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description isatap EDD A- - E -B DD- B br Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes amp Thanks in advance for any assistance offered Robbi nbsp

A:Plug a cable into the network adapter "Local Area Connection" Error - Lost internet

https://forums.techguy.org/threads/plug-a-cable-into-the-network-adapter-local-area-connection-error-lost-internet.949907/
Relevancy 63.64%

with an icon of a computer with a red quot X quot over it I do not know what a network cable is or how it could be unplugged because my computer came with wifi I cannot get it to connect to the internet at all My Dell Precision M recently had a Dell Precision unplugged" showing Network laptop cable Connection message,"Local Area computer virus and I Dell Precision laptop showing message,"Local Area Connection Network cable unplugged" ran malware megabytes to try to fix it Malwarebytes did clear my computer of the virus but after a few days of running malwarebytes my laptop gave me a message that it had to shut down to protect itself It said that if I had recently changed any settings on the computer that might be the cause of the shutdown Everytime I turned the computer on it would show the same message and then shut down again I brought it to a computer mechanic He said that malware megabytes got rid of the virus but probably mistook a good file as part of the virus My computer seemed to be shutting down because of a the good file that malware megabytes modified I got my laptop back from the computer guy today It seems to be fixed other than the fact that it won t connect to the internet at all The first time I recieved the message quot Local Area Connection Network cable unplugged quot was after I ran malwarebytes but before I brought it to the computer guy My laptop would often connect to the internet anyway back then I am wondering if malwarebytes might have changed the internet settings Does anyone know how to fix this problem Thank you nbsp

A:Dell Precision laptop showing message,"Local Area Connection Network cable unplugged"

If you don't have an ethernet cable connected then that message is normal. Since you apparently don't use it you can disable the connection in Network Connections to get rid of the nag.

It's impossible to guess what files might have been modified by the malware, the malware fighter, or the computer guy.

Does your wireless adapter appear under Network Adapter in Device Manager as OK? What, if any, warning or errors are there in Device Manager?

Assuming you are using an integrated wireless adapter is it switched on? Can you detect your network?
 

https://forums.techguy.org/threads/dell-precision-laptop-showing-message-local-area-connection-network-cable-unplugged.915461/
Relevancy 59.77%

Hi,
I have recently reinstalled XP pro on a PC and do not have internet connection using Internet Explorer or Firefox, I cannot ping either of my other two computers.
I have installed the Mother Board Drivers.

Device managed tells me that both network adapters are working properly, Local Area Connection tells me that I am connected although send/receive packets are about 1 (send) and 20 (receive) after an hour of being told there is a connection.

I multi boot with Windows 7 and a Linux system and they both have internet connection so it seems to be restricted to XP.

Any suggestions on what may be wrong would be appreciated.
 

A:Solved: network adapters good , local area connection good but no internet connection

https://forums.techguy.org/threads/solved-network-adapters-good-local-area-connection-good-but-no-internet-connection.904920/