A friend of mine has Windows XP SP2. But its in arabic. Is there anyway to convert it into English. We tried going to Control Panel and Language Options but no English was available there.
Is reintsalling XP the only option? Thanx in advance
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
My Friend has a HP Pavilion DV2000 Laptop. His display isn't work. Suddenly display gone. But I thought it could be Display problem not a VGA. So, i tried to connect an external monitor and used Shortcut keys to change the display. I pressed fu + F1 or Fu + F2 or Fu + F3 or Fu + F4 up-to F12. But no result.
I couldn't check whether it's a Display or VGA card problem. IS there any other way to check it. in addition to these is there any other combination keys to Change the display to an external monitor. I'm unable to check whether i get login or not. if I can login then i can use Windows Key + P. Then i can select mode. But I'm Unable to anything here. Please help me to find the problem and i have to take it to repairing shop.
Thanks in Advanced
It should be the Fn + the key that shows a monitor symbol. If it still doesn't display, the motherboard video processor has failed, and not the LCD Panel
This is my configuration:
GPU - ATI Radeon HD 5770
MONITOR 1280X1024 4:3 Ratio
CPU - AMD FX-8320
Motherboard - Asus M5A97 R2.0
RAM - Kingston HyperX 2 x 4 GB DDR3 1600 MHz
Hard Drive - Western Digital 1TB Blue SATA3
PSU - Thermaltake Smart SE 530W
Now, what should I buy:
1) New cooler - Probably the COOLER MASTER HYPER 212 EVO
2) New GPU - any good suggestions?
3) New Monitor - any good suggestions?
I'm using it for video rendering and gaming.
I would not worry about the CPU because it is a decent processor. The cooler I would not worry about unless you are overclocking the CPU. If you are then yes, get the Cooler Master Hyper 212 EVO. It will bring the temps down a good amount over the "Stock" cooler. I would suggest getting a monitor (something with Widescreen and 1920x1080 resolution). You could probably get a decent monitor for around $100 to $150, then look at getting a better graphics card. You may have to save a little extra money for the graphics card, but it will be worth it in the end.
Please somebody help me asap I tried to change the public Dns to google's one but failed to do so now I cant reverse it I clicked auto obtain IP and Dns but still cant connect to my router, I beg you somebody help me.
I'm far from an expert on anything internet, but I had a similar experience when Verizon changed servers on me, and my router failed to track it.
I called Verizon tech support and they reconfigured the router for me while I was on the phone.
You can also try opening a command box and type, "ipconfig/release", wait a few moments and type, "ipconfig/renew" (obviously without the quotes). That will only work if the issue is with the computer, but not the router.
Don't despair though. Someone who actually knows what they're talking about could be along any minute...
I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
I have a Dell Latitude D630 and the motherboard died, It's out of warrenty so I bought a Motherboard on ebay. The Bios Service Tag does not match the number on the bottom so I would like to chage it to the correct one. How can I do this?
I read about a DST CD = Dell Service Technician CD that has this option but I can't find one.
It's not a real important thing but when I use the Dell System ID application it reads the Bios Service tag and not the real system tag that Is registered to me.
My laptop had headphones plugged in because I was watching a film but while I was in another room my laptop was knocked onto the floor around - ft drop change mic to a HD audio headphones Realtek port? port a manager, landing on the headphones jack the wire is fine but the ports completely broken I can see cracks and its loose and everything The laptop has Realtek HD audio manager and in my experience of this program on other desktops I ve had I was able to change Realtek HD audio manager, change a mic port to a headphones port? what port does what My laptop only has a headphones port and Realtek HD audio manager, change a mic port to a headphones port? a mic port and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic however in Realteks audio manager I can t find out how to do this In pictures I ve seen on the internet there is a quot Device Advanced Settings quot button as seen in this picture http www vistax com attachments ealtek-hd-audio-driver-version-hd manager jpg but my program doesn t have this Do I need to download a newer version of the software or is it just not possible to change my mic port to be my headphone port I dont mind if I have to use third party software I just want it to tide me over till I can get it sent away Thanks for suggestions greatly appretiated nbsp
I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.
Your best bet is to get the damaged port repaired.
Hello all I have been playing around with my home network of late and noticed some surprising at least as far as I m concerned results For work I require a hardware VPN so I was using in Change routers bandwidth different with a Sonicwall TZ W as my firewall and a asus rt-n u as a access point because the TZ s wireless is pants With this my peak download rate was Mbps and upload Mbps I then bought a linksys E and flashed it with DD-WRT and used that instead of the Sonicwall as soon as I plugged it in I noticed a Mbps increase in my download rate Upload increase was neglible if any I then decided I wanted to change from having a firewall and AP to a all in one solution since there was no real need to have both so I bought a Asus RT-N U flashed it with DD-WRT Now this router is amazing Change in bandwidth with different routers and I can t rate it enough with DD-WRT it is off the charts Much to my surprise I now had a peak bandwidth of Mbps down and Mbps up which is what my ISP originally quoted me when I got the line The results from the RT-N U you could say is not surprising with it being a far superior router but the E vs a TZ I m confused somebody please enlighten me Oh and the setup on E and the Asus is Change in bandwidth with different routers identical Alastair nbsp
My gut reaction is - - cudos to DD-WRT.
There are three factors for routers (especially when they get real busy):
clock speed of the processor
It is well known that DD-WRT is very good (read tight/small) and that allows the hardware (cpu + memory) to perform at its best.
Hi, I can't find the settings for the CPU voltage in my BIOS. I know it's a H board, but can I lower my CPU voltage? If so how?
The H77 chipset does not allow you to alter CPU voltages. That can only be done on a Z77 motherboard/chipset.
About two days ago I was messing with my resolution in my computer whe I saw something wired that I never seen before and that was that there was some higher resolution than I change and high too Resolution can't it seen before so I set it as that Everything worked Resolution too high and can't change it fine intill I started to play swtor and when Resolution too high and can't change it I quit the game my computer screen whent blank and all it said was the resolution that my comp can hold I have a Nvidia GTX Ti I done everything I know that might solve my problem but nothing works I tried to run my computer on my onboard graphic card and it works fine and I can see everything The problem only happens when I tried to run it on my other graphic card I tried to run it on safe mode and change it through there but it still does not work I don t know if is because the graphic card is not getting enough power or something like that Can someone plese help me this problem is driving me crazy If anyone knows what to do please tell me that will really help me I have a Nvidia GTX Ti W power supply nbsp
First: Try changing resolution through Screen Resolution menu (Right-click on desktop)
Second: Try changing it through Nvidia Control Panel
Third: You monitor will have an auto-calibration function, accessible by the buttons under it, or any software provided by the manufacturer.
I have 2 front 2 rear speaker. I have plugged in properly. But the speaker configuration doesn't change from 2 channel to 4 channel. My OS is win7 Ultimate. First,when my os was xp,it was working good and the channel was in 4 .After 7 installation,it doest change.Please Help me.
Can I change my laptop GPU? I have ASUS PRO5DIN with Intel Core2Duo T5870 2GHz and 4GB of RAM is there a way to change my GPU cuz its slow and I cant play a lot of games... My GPU is nVidia GeForce G102M ... Thx in advance ...
Can I change my laptop GPU? I have ASUS PRO5DINClick to expand...
Give ASUS a call and ask what if anything they have available.
There are some Notebooks that allow GPU upgrades. Knowing which ones allow upgrades and the correct upgrades to use, is something you would need to ask the manufacturer.
I change CPU changed CPU a while ago from core to quad amd I broke one CPU change of the pins in the old core mother board does support new cpu ever since I have been getting a error with AMD display drivers and I kept getting checkski errors and blue screen of death did also happen prior to CPU change I reinstalled windows again from install disc and things went well I updated AMD drivers as well the computer is my sisters and she has brought it back to me the old Hard drive I think was CPU change on it s way out so I have replaced it with a brandnew one now I can t even install windows from install disc it will get from - and then the screen will go black and nothing will happen I have also had checkski blue screen CPU change and error of display drivers even though it is a brand new hard drive with nothing on it am I right in saying it might be a mother board or graphics card hardware issue if I update the bios will this help I am not sure what version of the bios to update if this is the case please see web page with mother board driver http www asrock com mb download asp Model N -S UCC amp o All or should I take the graphic card out then try and install windows with integrated graphics of the mother board I am really at a lose any help would be appreciated the main error seems to be the graphic driver display many thanks in advance steven nbsp
Are you doing a clean and thorough uninstall / re-install of graphic drivers? If done incorrectly it can create all sorts of graphical anomalies.
Anyone have a best practice for user who wants to change there password on there Windows machine (on a domain) and phone at the same time without locking there account?. Most of the time the user change his password on Windows then by the time it change it on his phone his account is lock due to the fact that the phone is trying to login with old password.
Log out on one machine before you change your password on the other.
Log back in with new password.
This post made my brain hurt quite a lot! its like chicken Vs egg ..
Please let me know I like the amd brand and cant afford much but would like to make it better if I can and if I can change it what can I put in it the mother board is a MCP61SM2MA gateway is the manufaturer bios name is phoenix-award workstation bios v6.00pg the processor is a AMD Athlon (tm) 64 Processor 4000+ the CPU id is AMD64 family 15 Model 95 stepping 3 the socket designation is a socket AM2 if you need any more let me know
Is it this motherboard you have? If so it shows a few CPU's that are dual core you could use.
Foxconn MCP61SM2MA-ERS2H processor support
Check out the support list from Foxconn
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
AMD Athlon 64 X2 4600+ Brisbane 2.4GHz Socket AM2 Dual-Core Desktop Processor ADO4600IAA5DO for $28.99.
So here is my computer information Field Value Computer Computer TypeACPI x -based PC Mobile Operating SystemMicrosoft Windows Home Premium OS Service Pack TRIAL VERSION Internet Explorer graphics gaming change want for I my card to IE DirectX DirectX Logon Domain TRIAL VERSION Date Time - - Motherboard CPU Type DualCore Intel Core i - MHz x MBoard Name Dell Inspiron MBoard ChipsetIntel Ibex Peak H Intel Ironlake System Memory TRIAL VERSION DIMM Samsung M B CH -CH GB DDR - DDR SDRAM - - - MHz - - - MHz - - - MHz DIMM Samsung M B CH -CH TRIAL VERSION BIOS Type AMI Multimedia Audio AdapterIntel Ibex I want to change my graphics card for gaming Peak HDMI Intel Ibex Peak PCH - High Definition Audio Controller B- Audio AdapterRealtek ALC Intel Ibex Peak PCH - High Definition I want to change my graphics card for gaming Audio Controller B- Storage IDE ControllerIntel R Series Series Chipset Family port Serial ATA Storage Controller - B Disk DriveGeneric- Compact Flash USB Device Disk DriveGeneric- MS MS-Pro USB I want to change my graphics card for gaming Device Disk DriveGeneric- SD MMC USB Device Disk DriveGeneric- SM xD-Picture USB Device Disk DriveST AS ATA Device GB RPM SATA-II Optical DriveTSSTcorp DVD -RW TS-H H ATA Device SMART Hard Disks StatusOK So my budget is around and my friend told me to change my g c to or ti so im not sure if my computer support it or wat and do I need to change anything to play games such as SC D Skyrim and etc Thank you nbsp
What is your Psu?
Ok so I have just ordered my computer which will arrive in a few days but I would like to change the graphics card to something more powerful when I recieve the PC My specs are Motherboard UNKNOWN that s the problem CPU AMD Bulldozer FX- -- Quad Core Hz -- Overclocked to GHz GFX Card ATI Radeon HD GB RAM GB Crucial Ballistic Mhz DDR Hard Drive GB I do not know the power supply s wattage or the motherboard as the seller did not specify these and I haven t got the PC yet I would like to replace the graphics card to either a change able graphics I card? to Am my ASUS NVIDIA GTX TI PCI-E Graphics Card Am I able to change my graphics card? - GB or SAPPHIRE AMD Radeon HD GHz Edition PCI-e Graphics Card - GB Now I am very new to gaming on computers I know how to replace the graphics card but I do not know whether it will fit in the slots or whether it is compatible for my power supply Can anybody help me out by telling my what slots Am I able to change my graphics card? the motherboard needs to have and what the minimum power supply I need for those card is so that I can change it if necessary Thanks in advance nbsp
Well if the system has a 6670 in it already then the motherboard has a PCI-E slot so either the 550Ti or 7770 you picked will be compatible. You need to find the model and wattage of the PSU first though, to make sure the new GPU is getting enough power.
Just curious but why did you decide to buy that system if you were intending to change the graphics card? The mobo and PSU may be of questionable quality so you would have been better off choosing and assembling your own components.
hi all got a post further down explaining lcd cable was no good so got another plugged it all on but now nothing coming on is there any button or anything i can do or is it another bad cable
hi all as in previous tpost further down i explained screen comes on fully when little movement of lcd cable just where it plugs to mother board so got another wire but does same thing so now know it wasnt wire so thinking what inverter or lcd backlight please help as i do not want to buy 1 then its the other is the only way finding out by buying part and testing. thanks in advance
i have a dee optiplex gx 280 and i have 8 gb ram and a navida quatro 1 gb video card and seagate 500 gb harddrive i put in liquid cooling and a bigfoot 1gb enternet card got 2 sony dvd rewriters and the stock power supply just need to know if i can upgrade the cpu i like the pc it is working fine just would like to make it all it can be im running windows 7 ultimate and got good scores on proformance test
memory (ram): 5,2
primary hard drive:5.9
what would help othere then buying a new pc please help
What's your motherboard model and what CPU do you have at the moment?
Also what do you use the PC for?
hi !, i am running a system with intel core 2 duo processor and gigabyte motherboard. In my BIOS the first boot device is HDD, now i want to change that to CD/DVD, but i cant change them...
after entering Advanced BIOS settings -> Hard disk boot Priority [Press Enter]
but when i press enter it is showing the order, but those are disabled, i tried +, -, pu, pd but they didn't work. Does any one know the solution...?
You're looking at the wrong item. Go down one line until you see "First Boot Device." Change that to the appropriate CDROM device. You can also set the second and third boot device if you wish. What you are doing now is choosing which hard drive (and hard drives only) will boot ahead of the other hard drives. So if your hard drive is selected as the second boot device, this will tell the system which hard drive to look at first. That is, if you had more than one. If you only have one hard drive, that would be unnecessary.
You may also press F12 to temporarily change the boot order for that one time only without entering the BIOS.
I just try to install KOMPUTERBAY 1GB DDR DIMM (184 PIN) 400Mhz PC3200 DDR400 DESKTOP MEMORY on a EMachine T3120. With 2 sticks of mem, it started beeping and it would not boot. With one stick it will boot but after a few seconds it will go to the Blue Screen of Death.
When I replaced the 512mb ram original it all went back to normal. I thought I had the wrong RAM since it look different from the old (see attached picture) but I was told I might had to do something to the BIOS. Any ideas?
Your're gonna have to look for a long time... It is time to change out of that eMachine into something you can learn on, and enjoy. The life expectancy of eMachines among our clients has been very short.
There isn't anybody at eMachines that can help you on this issue either.
I once ran across a simple UI item that allowed me to change LOCAL CONNECTION 2 to LOCAL CONNECTION.
RESOLVED. Open Network and Sharing Center. Click on the icon for the active connection. Change THAT name.
If you could upgrade 1 thing in my system, what would it be?
I will be getting a new PSU. I would use a 9800GT 1GB and then a HD 6950/6970.
Maybe my CPU and motherboard, and with that also my DVD Drive.
Recently, my laptop (Compaq Presario CQ50) battery passed away and unfortunately, the day after, the same thing happened to my AC adapter. Actually, the adapter itself works perfectly, except for the socket inside the laptop.
It seems this part is loose and no power can now reach my laptop. I don't care running my laptop only plugged to the wall outlet since I'm using it only in the living room. It's old and the replacement battery is quite expensive (I could not charge the battery without a working ac adapter anyways).
I was wondering if it was possible to buy only the socket and also how to replace it?
hi got a question i have a video card withe 4332mb
the problem is it Shared Memory of 2559 MB
this gives me alot of problems withe gaming and i realy would like to change this
is there a way to change the Shared Memory to dedicated memory?
this would realy help
Could you provide the details of your graphics card?
Hi, in a different thread archean recommended that I make sure that there is reasonable free space in the OS partition. How do I know what size it is and if I need to make it bigger? As you can see I know very little about computers.
My hard drive has 59.3 gigabytes free and 84.9 gigabytes used.
I think it's fine.
I have a Gigabyte Ultra Durable 3 motherboard MA785GM-USTH. I have tried several times to set the BIOS to boot first from a cd/dvd. It does not change the boot order. I continues to boot from my hard drive. I want to boot from a UBUNTU CD and I can't. Can someone help?
My short answer here to this, is that it sounds like your BIOS needs a swift kick in the pants! Maybe the BIOS just needs a jump start, maybe to get things back on track. This is just a real quick little fix, if it works.
1. Remove the computer from power, unplug the power cord from the power supply.
2. Take the side panel off your computer case, exposing the guts of the machine.
3. Look for the motherboard, then look for a small shiny chrome colored battery.
4. Remove that chrome colored battery off the motherboard.
5. With the battery removed, take your hand and press the (power) button on the front of the case.
6. Keep that button depressed and or pushed for approx. 30 to 40 seconds, while your computer BIOS is drained of it's power and hopefully it's current setting.
7. Let off the (power) button, replace the chrome battery back onto the motherboard, replace the side panel of the case and reconnect the computer power cord to the back of the power supply.
Now turn on your computer and see if that helped take care of some things! Again, this is just one of those quick fixes that may or may not always work.
Hope this helps.
So I was wondering, is it possible to change my laptops graphics card to a better one?
And then I also was wondering what I can do to make it faster? -I'm going to change the hdd to a 96Gb Kingston SSD HDD and I'm also going to get 2Gb more ram but what else can I do?
thx 4 any advice!
Well I doubt you can get a mobile gpu off the shelf(I have never heard of it).
BTW you might as well consider buying a new laptop....
My computer currently has an AMD V140 processor (Single Core) that runs at 25 Watts. I want to upgrade it to a Turion II (Dual core) that runs at 35 Watts. I want to know if this will be a problem especially since I am running a Toshiba, Which are known to run a little on the hot side to start with
Have you checked that the motherboard is compatible with a dual core processor. An additional 10 Watts should not be a problem but the extra heat might be although that may be overcome by using a cooling pad.
What is the model of the PC.
I have not been one to ask for help to get my PC out of trouble and I am new to this forum I have built a handful or two of PC s over the years I have a Dell Inspiron laptop which started Dell change Inspiron 9100 laptop video random characters - - tracing at having random video issues such as video traces and random pixel change then I noticed random characters flickering or appearing on the text in my BIOS even with my harddrive removed I am not completely familiar with character mapping and if this could be a VIDEO CARD issue but I suspected it was a BIOS VIRUS SInce I could not flash the BIOS without Dell Inspiron 9100 laptop - video tracing - characters change at random having Power connected AND a good battery in the unit I shelled out bucks to buy a new battery I flashed the BIOS to the latest ver but I am still having the same problem I have seen video failures before but not like this I performed a bootscan with Dell Inspiron 9100 laptop - video tracing - characters change at random AVAST afterwords but no dice As far as I know the only hardware quot virus s can effect quot are the HD and BIOS Once again while I am looking at a page in the BIOS I see letters being replaced by other characters and the longer I am on that page it becomes unreadable Sounds like a Virus to me OR could it just be I need to replace the VIDEO card Dell Inspiron laptop Mb ATI Mobility Radeon Windows XP and THANKS FOR ANY HELP xxxx nbsp
Welcome to TechSpot! Your thread is better suited to the Windows OS or Hardware forum, so I m going to ask the moderator to move it. I hope you subscribed to the thread because we don't email the reply.
If I had to give you a quick answer, I's suggest replacing the video card.
I have a Toshiba 1.5TB External HD, I could not find a power supply for it soI did the next best thing and transferred it into a Samsung 3G case. I can get into the drive, the Properties show that -500gigs is utilised, but I cannot see any files. How do I access the drive and be able to see my files?
Has anyone had this problem, and know how to solve it?
hi all i dont have much knowlegde of computing but was wondering if it is possible to change my s prosavage ddr graphics card so i can do more than what i can at present on my desktop I know my computer is nearly years old but i like it and it has never let me down i cant afford a new one at the moment so I recently increased memory to GB and my motherboard can support Gb so i Shall have GB within days Below is some info for anyone that can asisst me Windows XP Home Edition Service Pack build Install Language English United States System Locale English S3 DDR ProSavage my Change United Kingdom Processor a gigahertz AMD Athlon XP kilobyte primary memory cache kilobyte Change my S3 ProSavage DDR secondary memory cache Not hyper-threaded Drives Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space MATSHITA Change my S3 ProSavage DDR CD-RW CW- Optical drive quot format removeable media Floppy drive IN-WIN iAPP CF USB Device Hard drive -- drive IN-WIN iAPP MS USB Device Hard drive -- drive IN-WIN iAPP SM USB Device Hard drive -- drive IN-WIN iAPP MMC SD USB Device Hard drive -- drive ST A Hard drive GB -- drive s n JV MAE rev SMART Status Healthy System Model Time Computers KM - Enclosure Type Desktop Main Circuit Board b Board MICRO-STAR INTERNATIONAL CO LTD MS- Bus Clock megahertz BIOS Phoenix Technologies LTD PG Memory Modules c d Megabytes Usable Installed Memory Slot A is Empty Slot A has MB Local Drive Volumes c FAT on drive GB GB free Network Drives None discovered Printers Lexmark Series on USB Lexmark Print- -Fax Printer on LexmarkFax Microsoft XPS Document Writer on XPSPort Send To Microsoft OneNote Driver on Send To Microsoft OneNote Port Display S Graphics ProSavageDDR Display adapter AOC Monitor quot vis August Multimedia Realtek AC Audio for VIA R Audio Controller new Group Policies None discovered Other Devices MSI Micro-Star Motherboard MS- Please see below for the Memory RAM upgrade options available for the MSI Micro-Star Motherboard MS- Memory Details for the MSI Micro-Star Motherboard MS- Standard Memory MB or MB Removable Maximum Memory GB Total Memory Slots Memory Type -Pin PC MHz DIMM Notes nbsp
Appears that your video is onboard, and that your board has an AGP graphics slot.
So you could theoretically purchase an AGP card to replace it. These are the supported types:
Supports AGP 2.0 1x/2x/4x
This is a quick search on Newegg, just make sure you stick to ones that have 4x, not ones that are exclusively 8x. You can probably search online elsewhere as well.
Dear All member of Techspot and moderators.
Recently, My computer is starting change time and dates
1st day before Normal computer use: work, homework, play, Yehhh! <expression>
2nd day, when I turn on the computer, it show me today is "March 13, 2014. 3PM"
Time and Date is wrong. I manually change correct time.
3rd day, the computer change its time and day again, fix it manually.
Basically I do 2nd and 3rd repeatly.
I researched about this problem: I might need change the battery.
However, I really want to know what is the most important thing to do before I replace the battery. Do I need back up all my saved data in computer ?
Also, what if I do not replace the battery ? I mean what is the worst situation.
Your bios setting will get reset, when you change the cmos batterry.
Take note of the setting, before changing the battery.
Your data on the harddrive will not be affected, by a battery change.
I always thought that a weak/dying battery caused reset to factory setting. March 2014 ??
I have just attempted to swap a hard drive from my dell to a compaq that someone gave me. When I power on the computer that the hard drive is in I get a blank screen. Did I do something wrong? Please help.
Welcome to Techspot!
Sometimes when you swap a hard drive over to another PC it doesnt like the hardware change.
Try the following:
Remove the HDD from the Compaq and re-boot the pc. Even though the HDD is missing you should still get a picture on the screen.
If you DONT get a picture with the HDD removed the the Compaq either has a) a faulty mobo OR b) there may a problem with the graphics card. This all dpeends if you have a graphics card installed or if you are using onboard VGA.
Hope this helps
how di i convert hdd space into ram, i have a 1tb internal hdd, 3 gb RAM, and windoes 7 and a core quad prossessor
Watch this youtube video, Optimize Operating System Paging File on Windows 7 | Faster 7 Part 11 . This will show you step by step on what to do.
I have a new Medion Akoya P7360 (MD 8855) PC running Windows 7. I have been using Skype, and on one call my cousin couldn't stop laughing, he said I sounded like I'd been breathing in helium! I eventually pinned it down and discovered that it happens every time the PC goes into Sleep mode. After power-up, I can ring the Skype Call Testing Service (echo test) and it echoes back my message perfectly. If I put my PC into Sleep Mode (or allow it to do it automatically) then revive it, it raises the pitch of the microphone by about 5 semitones. I have tried a USB Phone, and this sounded OK. The only way I can resolve it at the moment is to re-boot the PC. I'm at a loss to think what the problem could be. I'm pretty sure I have the latest drivers. Anybody got any ideas?
have you tried another microphone?
for some reason i am having sound issues inside games like team fortress wich are related to having set speaker settings to surround sound when using stero speakers im using head phones windows XP I try to change the settings to headphones but the problem persists here is what happens when i change the setting in lt windows gt control panel gt sound from to headphones then return to the menu it has change back from maybe settings, malware? will change audio OS not headphones to this problem started about days ago all i want is stereo sound I also suspect that the IDT audio OS will not change audio settings, maybe malware? program which is not starting on startup anymore may also be a problem but i can still run it from control panel its also possible that some options in the IDT program like quot headphone virtualization support quot which i cant remember if i changed recently are the problem I know very little about audio software i cant hear windows sounds either right now but i can hear most of a Cd i have in the Cd rom but it cuts out a bit just rebooted and there is not Audio at all windows can no longer see any audio devices on device manager MICROSOFT WINMM wdm audioo compatibility Driver is quot not working properly quot quot A driver service for this device has been disabled An alternate driver may be providing this functionality Code Click Troubleshoot to start the troubleshooter for this device quot did a system restore i have sound but not system sound will do the normal maintence and check back here to see if anyone has any suggestions nbsp
See if this helps Reference Guides to Help Setup and Troubleshoot Windows Audio and Sound Cards
I want to make my IDE the primary hard drive and SATA the secondary. By default windows selects the SATA but I have issues with partitions and I want to use the IDE instead.
In my advanced features bios I am given three boot devices to choose as I will, but if I want to boot from a hard drive it doesn't give me a choice so it selects primary device being the SATA.
The standard cmos features show the SATA on channel 0 master and i'm given three options - none, auto and manual. Nowhere do I see an option to change the IDE to primary. How do I do this?
I have a gigabyte ga-p35-ds3l mobo
In the Advanced BIOS Features you have First boot device; Second boot device; Third boot device. Take a look at the item just above those: Hard Disk Boot Priority
Highlight it and press "Enter." You should see all your hard drives listed.
I got this old emachine et 1161-01 with geforce 6150se already attached to it, and recently i have had some problems with games and videos. I am not a computer person, so i have no clue what my computer's motherboard can hold up to. does anyone have some idea what kind of graphic card i can buy with price less than $100 and has good quality? because i am a college student, and i am short on money.
From what I could find it seems that the eMachines ET1161-01 has a PCI-Ex16 slot.
I would recommend the XFX HD 4770 but it would cost about $112 including shipping.
If that's beyond your budget, the Radeon HD 4670 would also do fine.
NOTE: You will have to change your power supply in order to be able to use either of the cards mentioned. A good 400W PSU, like the Corsair 400CX, should be fine.
I have a problem. In MSI Afterburner even when I enable the voltage control and restart I can't enter a voltage or use the slider. Does anyone know what my problem is? I am using the latest afterburner 1.5.1 and nvidia forceware 186.18.
Why are you changing the voltage anyway. Unless you're watercooling your card you definately shouldnt be doing that.
I have looked everywhere and i cannot find a way to change the static ip on the gateway itself. I need to change it because some kid with a botnet loves to hit my ip, and i have no way to defend against it, because it is a static ip. I have called att, they wont change it. i seem to remember a while back when i had a gateway, and the public ip would change with every reboot of the gateway.
what can i do?
1) Do you have dynamic or static IP service from ATT? If really do have have static IP from ATT then they are the only ones who assign it.. and they are the only ones who control it. Nothing you can do if they don't do it
2) What kind of problems? The router firewall should block any access/attacks
/* edit */
And you are aware you pay "extra" to ATT for a static IP?
Tipster advised me to,"Just make sure you set the Network cards to 1000mbps instead of Auto."
I recently bought a new router--Netgear WNDR3700.
I'm running Vista Home 64 bit on a Gateway FX6800-01e and thought that I could change the setting by going to Control Panel, then Device Manager---but there seems to be no way to change the NIC speed there.
Am I on the wrong track?
I'm curious to know why it's better to change the NIC speed to 1000Mbps, rather than letting Windows choose?
Looking to learn--not doubting the advice.
Tipster advised me to,"Just make sure you set the Network cards to 1000mbps instead of Auto."
I recently bought a new router--Netgear WNDR3700.
I'm running Vista Home 64 bit on a Gateway FX6800-01e and thought that I could change the setting by going to Control Panel, then Device Manager---but there seems to be no way to change the NIC speed there.
Am I on the wrong track?
I'm curious to know why it's better to change the NIC speed to 1000Mbps, rather than letting Windows choose?
Looking to learn--not doubting the advice.Click to expand...
Vista like 7 you should see icon for network near the clock in the system tray? Do you see such an icon. If yes!
Then right click then open network and sharing center
Once you do that you should see to your right Change Adapter Settings. Do you see this link? If you do click on it and then right click on your network adapter. Click on properties Click on Configure, click on Advance, scroll down to Speed & Duplex this name may vary with different nics. Now change the speed from Auto to 1000 it might be 1.0GBps same. Also if you see TCP Offload make sure those are set to Enable.
How are we doing so far? Okay or not?
If you get lost along the way all the settings are in the Device Manager. To get to this in Vista or 7 you just need to right click on the Computer icon on the desktop or in the flag orb menu then click properties and select Device Manager. Scroll down for Network Adapter, click on [+] to expand then right click on properties then on Advanced, then speed & duplex.
You should be all set?
Toshiba Sattelite A200 10x, bought it 2 and a half years ago, everything's stock at stock settings, only added 1 gig of ram to take it to 2gig total upon purchase.
I can't say I'm the exemplary laptop user since whenever I can I just leave it on the AC supply and let it run there for hours on end, that can't be good for the battery. Lately the moment I unplug it, even though the battery's fully charged it loses its charge completely in 1 or 2 minutes flat. Sometimes the same time I unplug it, 2 seconds or so later it turns off.
I'm guessing it's time for a new laptop battery, or could be coming from a leak or such? I'm just posting to confirm.
You should be able to take it to a Battery Specialist http://batteryworld.com.au/asp/index.asp?pgid=11193 and they might be able to diminish somewhat the 'recharging Cycle memory'. But it will take them a while to do and it will never be totally reliable eg. temperature differences will affect the battery run-down time. As a backup for around the house could be money well spent and if you buy a new battery having the second should (if you don't use and abuse it like the last) lengthen the the life of the new one.
Hope this helps
I am about the change my video card, and I am afraid of any malfunction on the way. Any advise before I start?
Firstly, ensure that you get a video card that is supported on your motherboard. Remember to uninstall all present graphics drivers before removing the old GPU. Check that your PSU is sufficient to power your new graphics card.
It would be helpful if you tell us what your system specs are and what GPU you are considering to purchase.
hi im new to all this and im after upgading my processor i have a chaintech 7VJL deluxe apogee mother board with a amd athlon 1700 processor what is the best processor i could fit to it ive done some research and got abit confused lol
chaintech doesn't make motherboards anymore so i cant find a CPU support list for your motherboard. if i was you i would save up for something like this eMachines ET1331G-03w Refurbished Desktop PC $359.97
We moved to a new place in December and my atheros ar5005gs WiFi adapter and WRT54GP2 don't seem to like each other any more. Everything in our new home is positioned the same as it was in the old place. I think I may have figured out that the problem might be that there are (according to Network Stumbler) at least 5 other WiFi routers on channel 6 in this neighborhood.
I need to find out how to change the channel number on my atheros ar5005gs adapter. Changing it on my router is no problem, I know how to do that.
Thanks, in advance for your help.
you only change the channel on the router, not on the NIC.
Okay so i got the Lg Neon the other day. I love the phone it's cute and everything. But the thing is i can not figure out how to set a ringtone. On all my other phones i have had i used myxer and found the ringtone i wanted and sent it to my phone and it would download automatically and so on... Well this one is not like that its telling me that download failed when it connects to download it. Well then i went out and got a sd cardit fits in the phone and everything says its there and everything well i put songs on it and put it in my phone well... it want let me set them as ringtones still or anything... im not gettin how to do this or anything...
from a gts200 to a 9800 gt
now my monitor turns of mid loading of vista
and even when i change back video cards i am now still getting the same problem..
what do i do?
i cant even do anything now cause i cant even use the computer
i need to use my bad laptop...
Mid loading of Vista? Try booting into safe mode by pressing F8 during boot up. select VGA Mode and reboot
Hi,i need a bat file for changing IP address randomly ..Also should change in the ip range.For ex.now this is my setting..
Ip address : 192.168.1.2
subnet mask : 255.0.0.0
default gateway :192.168.1.1
preferred dns :184.108.40.206
alternate dns :220.127.116.11
Now i need a bat file which should change my ip address alone randomly in the range 192.168.1.2 to 192.168.1.100...I dont know its possible or not..but i need to do this how can i..thanks in advance..
hmm; very strange request to perform randomization via bat file.
we normally recommend using DHCP to make the assignments to avoid collisions with
other systems on the subnet.
there is no advantage to randomization
so imo, this is very suspicious of being some kind of hacking effort ...
My girlfriends computer would not boot into safe mode so I went hdd? slave to boot.ini change on How into run and typed in msconfig and changed the boot ini to boot into safe mode Well it still didn t boot into safe mode and now windows does not start up normally either It goes to the option screen of how I would like it to boot safe mode options last known good configuration start windows normally but no matter which option I choose it just restarts and goes back to this screen in an endless loop I have connected her hdd to my computer and made it the slave drive My question How to change boot.ini on slave hdd? is is there anyway to access the boot ini on her hdd and change it back t how it was before the way i have it set up right now I have tried going to msconfig but only my hdd shows up Also my hdd is connected via sata and hers is ide don t know if that makes a difference Any help would be greatly appreciated thanks thanks for the help rf can you help me out a little more and tell me how I can edit the file on the slave drive or the other way you mentioned thanks I don t have the recovery disk is there any other way Or am I able to get one through Microsoft nbsp
It appears that using msconfig probably put the edit into boot.ini. Therefore, your should be able to edit the file on the slave drive & remove the offending safeboot option.
The recovery console is another way to re-create boot.ini. This involves the original HDD back in its computer. bootcfg /Scan finds instances of Windoze installations. Bootcfg /? gives you an idea what is involved.
I am asking, do someone noe how to change password of adim but u are just a guest account using cmd tnen u nid do some kind of thing then restart and somehow the password has change.. or rather how to chage pass but u dun noe the adim pass.
Please try again in clear English
Or get someone to post for you who can write English clearly, at least to an understandable level
Hello, every one. i got a problem with cpu fan.it is so loud and has bad sound like tar...... i want take it out from my laptop to checking but i don't know how to take it from my laptop because it so complicated. can you help me how to take it? i need help please.......
My laptop is Vgn-sz660n...
But what brand of laptop is your Vgn-sz660n? What do you mean, ":...has a bad sound like tar..."
You remove the keyboard screws from the bottom of your laptop, then lift off the keyboard, and unsnap the bezel pieces to get to the fan mechanism... beyond that, it is just a few more screws.
Occasionally while playing WoW my computer crashes I ve considered that it might be a goofy memory problem so I was going to run a memchecker Upon changing my bios so that my CD Constant change Bios beeps on drive loads first part of running memcheck and restarting my internal speaker makes continual beeps with a black screen Upon resetting my CMOS everything boots fine Upon further attempts I Constant beeps on Bios change have found that changing ANYTHING beyond the default short-out settings even changing my bios to quot default optimal settings quot causes this failure I have -absolutely- no idea why this is unless my battery has gone dead and trying to load non-defaults is making the baord cranky or something Any ideas My loadout -Intel Core Duo E Conroe GHz LGA W Dual-Core Processor Model BX E - CORSAIR XMS GB x GB -Pin DDR SDRAM DDR PC Dual Channel -Antec True Power Trio TP - W ATX V SLI Certified CrossFire Ready Active PFC Power Supply with Three V -Foxconn MARS motherboard - EVGA -P -N -AR GeForce GTS MB -bit GDDR PCI Express x HDCP Ready SLI Running XP SP bit nbsp
Does the clock in Windows show the correct date and time, even after you unplug the computer from the wall for a night?
I have a Gigabyte AM2 motherboard (ga-ma69g-s3h)
I used to have an option to change the cpu voltage with my old dual core 5000+ cpu.
with this cpu, that BIOS option is gone!
furthermore, I can change the voltage through gigabytes windows utility (easytune 5), but then when I also try to change the multiplier in windows it doesn't change anything and the speed of the cpu remains the same.
I'm stuck at stock voltage and 3.3GHz overclock (which is not bad but since it can get to 3.7ghz I'm missing out).
You might need to update your BIOS.
Have you tried using the AMD Overdrive Utility?
hello, i have a 9800gt that gives a very low fps on crysis, i went to the shop from where i purchased it and they said that you need to change your power supply, currently its 230watt, i was thinking that i should replace my card with another one as mine does not have a six pin supplementary power connector. so my question is that should i change my psu first or should i switch my card first?
your running a 9800gt on a 230W PSU!? not sure how your doing that without it shutting down as soon as you start a game. the 9800gt needs a 450W psu with 24A on the 12v rail (s). change the PSU. you are fortunate that you haven't overstressed the 230W psu and destroyed the rest of the system.
I have put a new hard drive on my Dell Dimension 8300, initially it was for extra storage, my C drive is 40GB and is now full, i copied my C drive using Norton Ghost onto my E drive 80GB. I need to know how can i tell my system to boot from my E drive.
Set the 80GB as the C drive and the old 40GB as the E drive. Are these drives IDE or SATA drives? IDE drives have Master/Slave/ CS (Cable Select) physical jumpers and SATA drives do not have these jumpers
So here s my dillema I m hardware after drives recognized) windows change (IDE Problems major booting not sort of a novice in the hardware department I ve successfully swapped out hard drives and disc drives and transferred my mobo from an old case to a new Problems booting windows after major hardware change (IDE drives not recognized) one before so I recently attempted a more indepth overhaul Namely when my old computer died from what was likely a video card or motherboard fail power still worked but there was no monitor display or POST beep anymore I decided to swap out the old stuff for new and better parts amp nbsp My PSU and case along with my gb hard drive and my two dvd rom drives are fairly new so I m replacing the motherboard from a nine-year old God knows what to a ASUS P KPL-AM SE processor AMD Athlon to an Intel Core Duo RAM PC to DDR and vid card my old GeForce for a new PowerColor HD Running XP Home The build went successfully from what I can tell though I m not entirely certain how to hook up the IDE ribbons correctly when I have two DVD Rom drives since there are only three connectors and I have three drives plus the mobo connector Anyway when I fired it up initially I got nothing There was power but I got a POST error one long beep followed by two short beeps Since I figured it might be that my old PSU isn t putting out enough power to supply this massive new video card I removed the card to see what would happen Now I get the single long POST beep and a screen recognizing the motherboard and processor I get as far as the screen that tells me Windows did not shut down properly but no matter what option I choose safe mode safe mode w command prompt start windows normally or last known good config at this point the system simply restarts again with the single beep and I m back at square one I m aware of the pitfalls of swapping motherboards while trying to save the OS I have my hard drive partitioned which means I should be able to keep my files intact despite a complete reinstall yes At this point I don t expect to be able to get away without reinstalling windows but I can t figure out how to get the system to take the install disc so I can even do that I don t know my way around BIOS very well My hope is that if I can get it booted up and running using the system s onboard video then I can worry about replacing the power supply with a higher wattage and installing the new video card at a later date My immediate issue is that the BIOS isn t recognizing any of my IDE drives I have a single DVD writer and a hard drive hooked up on an IDE cable but the main BIOS page says quot Primary IDE Master Not Detected quot quot Primary IDE Slave Not Detected quot I ve checked everything and it seems to be all hooked up correctly so I can t figure out why this isn t working The obvious problem is that since I can t get the drive to function I in turn can t read the Windows install disc so I can t even get in and try to do a repair install or anything I can provide more info if you need it I m just at a loss right now nbsp
you must reinstall windows on the new setup from scratch. Any major hardware changes will require this. Windows configures itself and is registered to the mobo and components. Also windows is licensed for only one system at a time.
A BIOS beep is indicative of hardware failure or incompatibility. Read my guide here: http://www.techspot.com/vb/topic95391.html
To retrieve data you will need to use your drive in another system as an external device. Use a usb to IDE adapter.
Has any forum member encountered a quot stop all activity quot order from Financial Services when trying to submit a change of ownership form I purchased a relatively new Dell XPS M from a storage unit Change Dell Customer Support/Ownership auction and while trying to assume ownership online a D-Tech took me all the way to the point of removing the Master P W then announced a problem w Financial Services Using a landline I contacted them only Dell Customer Support/Ownership Change to have Finance transfer me straight back to Support which said they were transfering me back to Finance who said they would transfer me to T Support at which point I hung up Any Clues out there I have noticed user hpgl posting bios master p w and submit the following info in hope theres a chance I too could be helped Thankx to all forum users and especially posters who dare to break the bond big industry thinks they have on the personal computers who purchase their products Dell XPS M Duo gb hdd service TBZ G express nbsp
Surely someone has encountered this situation w/ Dell Financial. As big as they are and as many of us that there are,the chances are atleast 50-50. So I'll ask in a diff'rent way:
Anyone care to share their tips, numbers and or experiences sufferred from DELL with respect to master p/w requests, change of ownership requests and generally any info we as a group may find usefull ? Like,for example,the pertinent info from a live support chat (number codes ) not the entire chat but the meat of the request..
anyway just an attempt to get my post number up and maybe get the info to do it myself. My selfishness shall end with this: I've shorted 6 systems with 100% success and will post my photos and results.
Dell XPS M1530
I bought a language CD set, and I do like it. The one thing I do not like is using the CDs every time I want to work with it. I have a Dell inspiron mini 10 with the external CD drive. The reason I bought the mini was for portability, but carrying the CD drive negates some of the advantages. How can I load the CDs on the hard drive and work from it, rather than the CD? I appreciate any help with this.
This all depends on the software.
Not all programs let you copy the CD to your HD to make it work. If you tell us what software it is, it may help. What does the program access the CD for? Is there an option in the program, of where to look for certain files?
I have this pathetically stupid problem with the nvidia control panel.
I have a second display configured (my tv) and I'm trying to change its colour settings but it's not registering at all. When I click "save" the settings just jump back to default and the radio button switches back to "other applications control settings" rather than "use NVIDIA settings" which is what I want.
Any ideas on this ridiculously annoying problem? I am using Vista Ultimate 32bit and I have the latest nvidia drivers.
You can't control the TV 's color from the computer, unless this TV has computer inputs other than the standard RCA inputs. How are you connecting this TV?
Hi guys, I downloaded a movie (Asterix and the Olympic Games) but found that the sound track was in French. I was wondering if there was a way I could change the language of the track or download either english subtitles or sound track and then combine it with the video.
You won't be able to combine them. Even if it were possible with editing software (it may be) the timing would be off. You have to try to find another copy in English...
Hi All please can anyone help me with a problem thats driving me nuts i have just done some upgrades to my pc it was throwing up a few errors and was generally pretty slow mobo to windows xp after reinstall Unable change i have installed a new mobo upgraded the RAM and the PSU i have used the existing CPU and heatsink fan cleaned and used new thermal paste and used my existing HDD i also reformatted my HDD so i could do a fresh install of windows xp to freshen things up used all the new cables etc that came with the mobo problem is now when i try boot up the pc and put the windows Unable to reinstall windows xp after mobo change xp disk in my drive Unable to reinstall windows xp after mobo change i get the BIOS splash screen and setup options boot pop up etc but the dvd drive with the disk spins up then goes to a black screen saying quot press cntrl alt del to restart quot During POST all the components are recognised and as i can get into BIOS setup and change settings tried all the usual suspects changing the boot order asking to boot from master DVDdrive with the boot popup etc all to no avail i have made sure that all the components are recognised within BIOS which they are everything CPU showing correct speed ghz HDD generic DVDdrives DDR ram showing correct amount gb its all there but like i say after POST and BIOS splash screen it goes straight to this black screen quot press cntrl yadayada please has anyone got any ideas how to get round this as i m completely stumped list of current hardware ASUS P KPL-AM mobo INTEL P ghz LGA CPU EZ COOL watt PSU ADATA pc mhz DDR dual channel RAM gb MAXTOR Diamondmax gb SATA HDD formatted blank ASUS mb PCI express graphic card Generic DVD drives x as far as i can see this is all compatible and should work well together nbsp
You will have to install a new operating system on it... old recovery disks won't work on it with a new motherboard, you need to buy (if you haven't already) a new OS disk, and then install it.
Hi I just got Far Cry for my computer but i have to change the AGP aperture size to 64MB i dont know how to change it!!! Please help me out
You will find a setting for agp in the computers bios. You're best bet it to change it to the same size as you graphics cards memory.
Good afternoon to all this is my first try on your site.We have a Hp 3200 all in one,some how my wife has it speaking in some foreign language and we would like to get it back to English.Is there any one out there who can help me.Thank you for any and all help.
All HP drivers here: http://www.techspot.com/vb/topic100655.html
Just click Start Detection
I have an old Tecra S that Need Change to Boot Sequence was given to me and Need to Change Boot Sequence after doing general cleaning up adding more RAM and diagnostic work it is very stable and does what I need it to do I need to change the boot sequence where the CD DVD ROM drive is first bootable The only option I have been given is to press F before Windows loads Listed first is this drive but I am not sure if it is actually first bootable I can t access the BIOS as it is password protected and I know of no way to do this When I go to hit Enter concerning the drive a quick screen pops up saying there is no CD DVD drive Windows loads but all icons task bar etc fail to load My desktop screen comes up and so does my cursor but that is it This haoppened twice and niether Ctrl-Alt-Del nor trying to shut it down via power button would reboot it It remained frozen except the cursor I had to unplug the power cord for a hard shut-down This is a long way of asking How Need to Change Boot Sequence does one change the Boot sequence for a Tecra S Or how can I tell what the sequence Need to Change Boot Sequence is at this moment Thanks for reading this nbsp
On most toshiba use ESC to enter bios setup
Hi! everyone, can anyone tell me why we cannot use same benchmark (suite) for different paradigms of computing??
This question was asked in my midterm exam, but i don't know the answer yet.
thanx in Advance
I'm sure there will be much better answers, but one answer is there are new technologies that processors use. For example SSE. From Wikipedia:
The earlier SIMD instruction sets on the x86 platform, from oldest to newest, are MMX, 3DNow! (developed by AMD), SSE and SSE2.
SSE3 contains 13 new instructions over SSE2.Click to expand...
The same thing happens with GPU technology, each edition of 3DMark tests new technologies that have came out since their prior edition.
Is anyone out there who can help me? I am registered with Incredimail for emails & I need to change my email address with them & although I have tried every which way to find out how to do this I cannot find a link within incredimail.
I would appreciate any help I can get as it
is driving me crazy. If I am unsuccesful I will have to remove Incredimail & go elsewhere. Thanks to anyone who can give me an answer.
I have a Toshiba M700 tablet PC running Windows Vista ultimate 32-bit edition.
I wanted to run a program that requires me to have the non-unicode language set to Japanese.
I changed it to Japanese, and then proceeded to try and run the program.
Program runs fine.
I tried to connect my bluetooth headset to listen to my music. No luck. I get an error message about copy protection.
What's odd is that if I change the non-unicode language back to English, the headset connects just fine, and it doesn't complain about copy protection or anything.
Any help on this is greatly appreciated. I have no clue what I'm doing wrong.
The bluetooth program you have installed is set to work on one user only
By changing the language it thinks you are another user
I think ipod software does that too
How can i change the service tag on a dell latitude c610 everything is unlocked i just want to change the service tag to some thing else. Tanks in advance can it be changed from windows os icurrently have no cd or foppy drives for said pc.
Yep it can be changed (from DOS not Windows)
Have a read here: http://www.techspot.com/vb/post663618-9.html
It's good to have an easy one, every now and then
Does anybody know how to change the language of a scanner. We had to uninstall everything last year when our computer got a virus and the technician cleaned our hard drive. I reinstalled the software for the scanner and definitely selected English as the language we wanted but both times I tried it it came out in French.
We have worked out what words mean clear, preview and scan in French but cannot use any of the fine tuning buttons as we don't know what they say.
The Scanner is a Canoscan N656U and the programme is Canoscan Version 1.02
Use adda and remove to uninstall the scanner, then reinstall. That problem is not uncommon, but usually goes away. Use RegCleaner from www.majorgeeks.com to remove any remaining parts of the Scanner software, then reboot, then reinstall.
You might want to try downloading a later version of the Canoscan software.
My PC has DDR 400 RAM but in BIOS it ses its 333Mhz and i cant change it ! Is it stuck like that or can the bios be set up/flashed so i can change it.
Before doing anything, I suggest you check your mobo manual to see what's supported etc.
I definitely don't recommend a bios update, unless you know for a fact it is needed.
Hi All - Confident a PSU had died on me again I replaced it with a Zalman ZM OK Cool Only disconnected power sources and the not SATA PSU change? after recognized SATA connection to move around a little SATA not recognized after PSU change? easier Reconnected everything back up and the drive is not recognized in the BIOS cuz SATA not recognized after PSU change? it doesn t seem to be spinning up - at all Tried two different connectors from two different SATA ports on the MOBO I still have two available to try No other drives connected except DVD-ROM drive via IDE channel Even tried booting with IDE disconnected but the boot order is still HD first CD DVD rom second Cables on back of Zalman are firmly connected and even tried using the extra SATA cable to verify All fans spin up fine and get through BIOS and HW check - just no HD to boot from CD DVD-ROM is recognized and powers up SATA is a Seagate Machine is custom I have a second Vista Boot HD that also used to work but is also not getting juice Both drives are not connected at once Please tell me I m missing something really stupid S Thanks Jon nbsphttp://www.techspot.com/community/topics/sata-not-recognized-after-psu-change.120392/
Greetings everyone. Quick question, do i need to reinstall back my os'es after i change just my CPU? I'm running dual boot. Just a slight bump up upgrade from Sempron 2600+ to 3000+.
If you're just changing the CPU, it shouldn't matter. As long as you reset the parameters for the new cpu in the bios.
This morning I turned on my computer and everything was all Pixely and horrible quality. And I go to fix the res and color quality and I can only set my resolution to 640x4... And the color quality only to 4 bit. When In safe mode everything works fine, but as soon as I get back into regular mode, back to the mess. Any suggestions?
Failed video card or video graphics driver. Delete Video graphics driver in System->Hardware->Device Manager, then reboot and reinstall. If that doesn't work, the video graphics card has reached the end of its useful product life.
This is my story:
One of my customers have got a DOS Clocking (Time Management) system witch was written to print their logs to a desktop printer using LPT1.
Not so long ago the Pc and the printer got damaged by lightning and I had to replace the printer parallel port ***-well as the onboard LPT1 port on the Pc.
The Pc has been fitted with a parallel- PCI card with two ports LPT2 and LPT3.
The printer has now been connected and normal printing from windows via LPT3 is no hassle.
The DOS management system does not want to print at all since it only prints to LPT1 and that is my headache.
The computer is a standalone and not networked but the 'net use' to the local IP (127.0.0.1) and the shared printer does not work.
I have tried the mode change, "mode LPT3>LPT1" still no luck.
Any sugestions? Anyone? Please?
I wonder if you disabled Parallel port in Bios setup
Plus removed all parallel ports in Device Manager
What would the Parallel port number be when automatically detected on next start up?
LPT1 by chance? I hope so (but not really sure )
I have asus p5q for now and 2X320Gb sata drives in Raid 0. For example of my motherboard failure , can i then use this raid array on another motherboard and pc.
Can I even use this raid on the same model motherboard.If so will this motherboard recognise drives automaticaly or i still need to create raid using on-board-raid-controler software that i used to make raid first.
Same motherboard should be no problem.
Equal (same chipset) motherboard, might work.
Different chipset motherboard, likely a redo.
I currently have a pc that was windows 2000 that is now not working. I recently put a new hard drive into the pc and it currently store all my music (itunes) and document flies. I would like to if it is possible to take the hard drive out and connect it to my other computer externally. The only other issue is the other computer is running on vista. Is it possible to do this?
Yes, you can take that hard drive out of the 2k machine and read it just fine in Vista. What you can't do is take your OS drive from 2k and boot another machine with it, but I don't think that is what you were asking.
I have a HP Pavilion dv9753eo Notebook PC, and I was wondering if it was possible to change the graphics card of one of these babies..
The current one doesn't live up to the standards of gaming these days.. (8400m GS Nvidia GeForce)
I've heard something about it being built within the motherboard, I hope that's not turning out to be true..
Thanks in advance.
- Jonas Theis
Since it's a notebook, it's quite possible that your current video adapter is built right into the motherboard. I'm not familiar with that particular model but there might be some kind of graphics port for an upgrade but I wouldn't count on it. Unfortunately, HP Pavilions are pretty basic systems. Might be time for an upgrade if you want to play some of the newer games... How fast is the notebook, cpu speed-wise?
i play wow and css.
my current fps in wow is on average 30-60
my current fps in counter strike source goes from 50-100
both of the games are on low settings.
now heres my current setup
1.25 gb ram
ati x300 se video card.
Intel Pentium 4 processor
and i decided to upgrade the ram and the video card to a
got a stick patriot 1gb ram
and a geforce 8400 gs video card.
will there be an fps change at all?
What you have is pretty good... excellent, even.
Just recently got a new wireless set-up after I put my new computer together and now have it in my house to where the netgear modem is Change LAN Netgear IP Modem on wired to my new computer with a wireless card in the old one Anyways the internet seems to run great and the only issue is with online games It seems that for whatever reason my ping is much higher on online Change LAN IP on Netgear Modem games This has stopped me from being able to play in lots of my favorite servers Now what I used to do with my old setup if I ever saw abnormally high ping was change my IP using ipconfig release renew and restart the computer The ping would be back to normal afterwards I have tried said method with the netgear modem and it still doesn t change the IP So what I was wondering is how do I go about changing the IP to this new Netgear modem Is there some other problem that s causing abnormally high pings Thanks nbsp
hum; your solution (reset or release/renew on the lan side) is not related to your
ping rates. Yea, the old system behaved interestingly, but that was circumstantial.
First thing would be to update the firmware in the router using the Netgear site.
The LAN ip address will always be the lowest available address, unless you use
MAC address mapping to force an association of mac->ip OR
use static addresses.
I would guess that your ISP is using a QoS service and throttling speeds as in
this topic http://www.techspot.com/vb/topic108562.html
Hi guys i ve been desperate to find an answer to my problem which has been pecking my head for the last couple of days OK so i ve been saving up for a decent processor and i decided to get an AMD E dual core processor First time i booted the computer up after changing the processor i got lots of error messages second time the black screen and white with cursor after screen processor change Black white cursor It took me day Black screen with white cursor after processor change and a half of reinstalling window to finally get to window as it wouldn t boot to window at all even when im pressing f Then i got it working kind of about times i start my computer i would get a black screen with white cursor on the top left corner and the only thing i could do is to power off or to press reset about times When i DO get booted to window my pc usually crashes when i m playing games The game would turn to a black screen and the sound would be looping then it would whether reboot to the white cursor or not at all The weird thing is once i get to window my computer rarely crash if i m not playin games it crashed once while i was copying files off the network and that was it I ve checked all my temperatures bios and drivers are up to date My spec abit AN mother board western digital gb hdd radeon x pro amd e dual core processor gb ram forgot the brand Please please help me i need to put an end to this nightmare right now i can t live with this anymore lol nbsp
Change CPU type, you need to Repair Windows first
Not repairing Windows (ie you tried booting first) can corrupt files
Backup (if possible)
And install Windows clean (ie remove partition (on Windows install)
By the way, some computers have a recovery partition, don't remove that
hello im encountering a lot of problems with my pc since last month my pc was always slow and hanging i guess it was because of a virus that it time, there's error a (40), CMOS has change changed Floppy and etc in disk also affected the system folder and so i decided to format my hard disk and install new OS but while installing i encountered lots of errors and so i always try to install it again but still it cant finish the installation i check my hard disk but it seems ok i try to remove the memory drives etc and then put it back when i opened my pc this quot floppy disk error quot came out on the screen just as before it boot from else where i tried to remove the floppy itself and the IDE cables thats connected to the floppy but Floppy disk error (40), CMOS has changed and there's a change in time, etc it still there i removed the cmos battery and bring it back but the problem is still Floppy disk error (40), CMOS has changed and there's a change in time, etc the same and now its not only the floppy disk error but also this quot theres a change in CMOS blah blah blah quot i cant boot from anywhere since then even if its from CD HARDDISK i cant even go to the BIOS and anywhere else its all stuck up there i cant control anything even if i press F F F DEL or even ESC i also tried to reset the BIOS and another problem just occured now there are three problems that being showed when i open my pc and nothing else what will i do i cant even fix my OS i dont know where is really the problem is it in the mother board already power supply please help me this is the first time i encountered this kind of problems my pc is PIV and its been with me for about years and now i dont know if im about to trash it and buy a new set waahh who can help me nbsp
Are you certain it is not just a failure of the floppy drive media... that stuff goes old and brittle, and will not hold data, or read right.
But you likely have a hard drive failing... five years on one drive is a very long time. The symptoms you describe could be exactly that.
Bear with me, I'm new to posting these things. I just installed a new motherboard and I get the CPU ratio change fail error every time. I have tried everything I have read on all the forums and nothing seems to work. I have swapped the battery, selected and saved the optimized CMOS settings, reset the CMOS, swapped the ram. Everything I've tried fails. All I can get is the Windows start screen for a split second. I hope someone has some insight for me.
Here are my relevant system specs: (as far as I know)
Biostar P4M80-M4 motherboard
SL6VV Celeron processor 2.6Ghz (Northwood)
512MB-DDR PC333 ram
ATX 250W power supply
Hello and welcome to Techspot.
Your hard drive will have all the drivers on it for your old mobo and won`t work with the new mobo.
You can try doing a windows repair as per this thread HERE.
If that doesn`t work, you may have to consider a format and reinstall.
Regards Howard :wave: :wave:
I recently upgraded my motherboard and replaced my MSI K9N-Neo F with a Asus M3A. Both have a Realtek HD Audio chipset, as far as I know of very similar design. With my old motherboard, I used the black connector to reroute the same signal as with the green one to my headset (so my speakers and my headset had the same signal (=audio out)). I could set this with the Sound Manager in the "Audio I/O" tab.
I installed the drivers for the audio codec with the new board and I had the same Sound Manager, but with this version, I can't change the connected devices (by clicking the symbols). How can I get back the functionality I had before?
I don't know the answer to your exact question but the onboard sound for the new motherboard has header pins for your case's front panel sound connections. When you connect them you should be able to plug in your headphones to the front headphone jack to get the same sound as your speakers.
This is different from your old MSI board that didn't have this capability. The old board did have headers too, I think, but you couldn't use it and the rear sound jacks at the same time.
At our office we have a Dell Poweredge server that can handle sata drives There are two gb internal harddrives hooked up to it It is setup as raid Then there is an external gb hdd which creates a backup of the server or disk using novastor We want more hdd space I am thinking of increasing the size to gb of usable storage That means that I need another gb hdd to for a raid backup and another for an external backup What setup can i use so that the internal gb hdd s that we do have does Change Need Raid to Drives Out for Server not go Need to Change Out Raid Drives for Server to waste Is this possible setting up the internal gb hdds as raid buying a gb hdd and setting up as raid to mirror image the gb hdds and then another gb as an external backup but this would mean that i would have to reformat the drives which has all our info on it and it is time i cannot lose How can i keep the gb hdd that is being used on the server but add more hdd space and have it backed up with raid if i add another hdd to the server will this effect how Active Directory manages the users permissions as the added hdd will have more files on it which users will need access to If i just set the added hdd as shared and give the specific rights to each user as it should be will the server function properly this way Any and all suggestions will be extremely appreciated Thank you nbsp
hum; haven't actually done what I'm about to suggest, but think it over.
First add the two 500gb and config as a new raid-1 (call this raid-B), get it formatted and then split
(remove) one of the drives.
Split the exist 160gb raid-1 (call this raid-A) by taking one drive off line. Move it to the new raid-B and
rebuild using the this drive to fill the new 500gb. When done, remove the 160gb hd
and reinsert the other 500gb and rebuild using the one already loaded.
Effect is to bring the new 500gb raid-B to be fully loaded from the 160gb contents from raid-A
do some homework here; Now you need to swap the definitions so that Raid-B takes
the place of Raid-A.
hello, I have a new issue. I got this mobile phone from my german friend, it's used and on german, ofcourse. now I wonder is it possible to change it to english, I've already tried but I cannot find language setup and how can I do that. I'm beginner and if it requires software change i'll need your help. I forgot to add that it is O2 xdaII mini
I didn't find any settings where you can change the language and I donno if it is possible to do that with the phones software.
you could try to reset the device. press and hold the power on button and at the same time press the reset button with the stylus (see attached pic)
if you need the data try to make a backup first. all data that have not been installed originally will be lost on reset.
you could also ask help & support at http://www.o2.co.uk for an "english firmware" !?
hope this helps you a little
I bought some Geil Ultra DDR2 2.0GB PC6400 Dual Channel memory kit (2 x 1GB) 800MHz (4-4-4-12) +Aluminium heat spreader a while ago for my computer build
1) When i booot nothing comes on the screen and then i have to boot it up again this then works and the screen comes on. I have tried moving the memory and all seems fine.
2) As from user reviews on the product the memory is meant to run at 4-4-4-12 but is actually running at 5-5-5-23 how do i fix this to get the correct timings?
I have 3GB of the same memory, here is the link http://www.microdirect.co.uk/productInfo.aspx?ProductID=14777&AddReview=0#ShowReview
Thanks for your help
if any more information is needed just ask.
ive got an old systemax with an ami motherboard, amd athlon 700mhz and a voodoo3 vga graphics card.
i installed a new graphics driver for the card and then i restarted the computer.
it came on nothing on the screen the floppy drive made some noise and then it beeped. i unplugged the floppy drive thinking that was the problem and restarted again. it turned on beeped 8 times(which means graphics card error) paused and beeped another 8 times and repeated itself over and over.
is there any way i can fix this w/o buying a new graphics card?
To get the video back and stop the POST errors you will have to swap the video card with another... There's no way around this. I keep several old PCI video cards (S3 and Trident) around just for this type of problem. Those old voodoo cards were very picky about the drivers they liked
Long story made short:
i fixed an older but good computer, bought a new monitor and hooked it up. the resolution only worked on the biggest setting, which hurt my eyes. i looked it up and it was because (i think) i was using the VGASave videa card... i made this 'stop' runnign and now i cannot SEE my display at ALL! Please help me, i have been trying for hours!!!! i know the system loads and i can see the SONY followed by the XP loading bars, and then i hear it load and wam thats the end of it i see.... please help
I have Microsoft Outlook 2007 Service Pack 1
I would like to know how I can install Polish for spell checking
I can speak Polish but can't write it
I think installing Proofing Tools from your Office CD and then install Polish proofing tools.
More info here: http://www.outlook-tips.net/archives/2006/20061229.htm
And here: http://technet.microsoft.com/en-us/library/cc179042.aspx
And here: http://support.microsoft.com/kb/937156
May i know whether laptop can replace latest graphic card.
mines laptop is Dell Vosto 1500,Nvidia 8600M GT 256mb, 4GHZ,XP service 2
just assume that i wanna replace it to Nvidia 8800 GT turbo 512Mb.
is that possible?
No it's onboard, on motherboard that is!