Windows Support Forum

Deafult gateway doesn't start with 192.168

Q: Deafult gateway doesn't start with 192.168

So my deafult gateway dosnt start with 192.168 but for my laptop it does and my brothers pc does for me it starts with 46.109.248.1 Any Help I cant portforward Help me il try anything and my Router is Technicolor

Relevancy 100%
Preferred Solution: Deafult gateway doesn't start with 192.168

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Deafult gateway doesn't start with 192.168

Can we assume "my laptop it does and my brothers pc does" applies to his pc connected to your router?

login as an admin, get a command prompt and issue these two commands
netsh winsock reset
netsh int ip reset c:\resetlog.txt

reboot

http://www.techspot.com/community/topics/deafult-gateway-doesnt-start-with-192-168.200832/
Relevancy 21.5%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 18.06%

I have a dell latitude e6510 that won't start up. When I push the power button, the cooling fan starts up, several of the lights on the case come on for about five seconds (hdd and power) and then the whole thing powers down.
Anyone have any ideas?
Any help greatly appreciated!
 

A:Dell Latitude E6510 will not start up

Have you tried a hard start. Disconnect the battery and power cord. Then hold down the power button for about 30 seconds. Then try reconnecting the battery or the power plug and see if it will start. If this dose not work you might what to post your computer or laptops Model and make plus your systems specs.
 

http://www.techspot.com/community/topics/dell-latitude-e6510-will-not-start-up.183347/
Relevancy 22.36%

Hi every one
I need your help gays
I saved some files in my USB but when I explore my USB the files are not appear
it shows that usb is empty
I do not know what to do
thanks
 

A:USB drive doesn't show my files

Have you tried the same USB on a different pc? If not, do so.
 

http://www.techspot.com/community/topics/usb-drive-doesnt-show-my-files.187106/
Relevancy 21.93%

Hi all,

My friend's USB flash memory has data (its drive shows that there is data in it) but when I double click on it to open it and see the contents, it doesn't show any folders and files! I did the following works:

1- I scanned it by my updated kaspersky AV. but no threat found
2- Scanned by windows defender tool. same result!
3- scanned by malwarebytes anti-malware. same.
4- cmd (run as administrator) -> go to its drive (e.g., H:, when H is my flash drive) and typing the attarib -s -h *.* /s /d command. It could not to show the data.

All my attempts faced failure till now.

Can anyone help me please?
 

A:USB flash memory has data but doesn't show the contents

Salam
Go to cmd (run as administrator) -> go to its drive (e.g. H: where H is my flash drive) and type the attrib -s -h *.* /s /d
Now flash will show the data.
Your attrib spelling was wrong correct them
Try it.
 

http://www.techspot.com/community/topics/usb-flash-memory-has-data-but-doesnt-show-the-contents.193421/
Relevancy 25.8%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 27.52%

Gateway NE56R41u laptop freezes after 5-10 minutes of running, ran many many tests and scans to try to find malware but nothing was found, it works fine in safe mode but not in safe mode with networking, please help
 

A:Gateway Laptop isn't working

When something works in Safe Mode but not while in Normal it points to a driver issue. Have you tried updating your WiFi/Network Interface Card (NIC) drivers for your system from Gateway's website?

Do you use a cooling pad? Laptops can get hot quickly and high temps will freeze/shut-down a system fast.
 

http://www.techspot.com/community/topics/gateway-laptop-isnt-working.209213/
Relevancy 22.79%

I built my desktop in Sept These are the specs Motherboard Intel BOXDH CLB LGA Intel H HDMI SATA Gb s USB ATX Intel recognized doesn't HDD get Motherboard Power Supply RAIDMAX HYBRID RX- SS W ATX V V EPS V SLI Ready CrossFire Ready Modular Power Supply New HDD doesn't get recognized Version with Build-in LED Fan On Off Switch Graphics Card GIGABYTE GV-N - HDD doesn't get recognized GI GeForce GT Fermi GB -Bit DDR PCI Express x HDD doesn't get recognized HDCP Ready Video Card CPU Intel Core i - Sandy Bridge Quad-Core GHz GHz Turbo Boost LGA W Desktop Processor Intel HD Graphics BX I Last night Feb th I was peacefully watching tv on it I shut it down before I slept Next morning I wake up and turn it on And my baby doesn t turn on She won t respond to my fingers Fans aren t spinning like nothing So what did I do -I opened her up I saw the green light on the mobo was on This gave me a hint that PSU is Okay -Checked if everything was connected even though I haven t moved the computer anywhere lately so I don t imagine anything to get loose Seemed all good -Then I wanted to test the PSU I unplugged the PSU from Mobo the pin connector Only top fan was connected to the PSU Then I carefully performed the paper clip test The top fan ran Woo This makes me thing that PSU is still okay -So I connected it to the rear fan component on the mobo I did not connect the pin connector So at this point I still have the paper clip in the PSU plug I did the test again Only the top fan ran Rear fan did not run Top fan is directly connected to the PSU Rear fan is connected through the mobo -Now I am not sure if the rear fan is supposed to run if the connector aren t connected If the rear fan should run regardless if the pin connected as long as PSU is directly supplying to the rear fan component on the mobo then I would say that my mobo is bad If I need the pin connector to run the rear fan along with the direct connection from the PSU to the component then I would say my PSU is not giving enough power -So I went on got a PSU from best buy with same watts to see if it turns on It did Therefore my old PSU wasn t producing enough energy However now my HDD is not being recognized The BIOS says no Hard Disk recognized All my SATA cable is connected to my PSU I feel my SATA cable that connects HDD to mobo is bad -I connected PSU directly to HDD and still not luck I did this to find out if the connector that comes out of HDD had problems which I think it doesn t Less probable -This is why I think my SATA cable from HDD to mobo is bad as it s not giving good connection I hope my HDD didnt go bad I am trying to see if I can find anyone to check if my HDD will work on their desky -Any Suggestions nbsp

A:HDD doesn't get recognized

A SATA cables are cheap, go get one and try that.
 

http://www.techspot.com/community/topics/hdd-doesnt-get-recognized.208757/
Relevancy 18.06%

My Dell Inspiron 5520 will respond when I press the power button, will flash all the LEDs and then just shut down. The whole process takes about 6 seconds. The fan starts up but nothing is displayed on the screen and there are no weird beeps. Any ideas on what is happening or how to get it to complete booting up?

I got this in December of 2012 and have had very few other problems with it
 

A:Dell Inspiron 5520 Will not start up

Are you comfortable with disassembling the laptop? Really the only thing we can test is removing the Hard Drive, RAM, and DVD player.

First I would try the HD and DVD to see if either of those are stopping it from powering for what ever reason, and you will still get something on the screen and see if it boots.

Once you remove RAM you are not going to get anything on the screen, it doesn't POST(Power-On Self-Test) it will fail guaranteed, but you "SHOULD" get beeps, however the problem with that is ensuring the MB is actually causing the Beep, and if it's not it'll just do the same thing regardless, it's best to have some spare RAM that you know works to test with. (Same speeds and kind, need to be sure) The reason for this is to make sure that it's not RAM but you're not just getting the same issue.

Putting in some spare RAM will at least allow you to ensure it's not just the RAM chips, one thing to try if you have multiple sticks of RAM is try each stick separately, and in each slot to make sure it's not one stick or one slot causing and issue.

The only other things to make sure is the power that is getting to the laptop is clean power. Two ways to do this as well, firstly you can test the power supply using a Multi-Meter if you have one and know how to use it. You can check the voltages on the power supply, Connect to the wall and test the first portion to ensure 120V clean power, then if its good, test it going through the transformer and check the bottom of the laptop (Possibly underneath the battery) for the proper Voltage and Amperage. Test with the multimetre and see if it matches, if its not giving proper power it can cause tons of issues.

The other option is to buy a universal power supply and change the voltage to match the laptop and then try it. Due note that not ALL universals work with all models of laptop and that it's not the recommended way of power, it's best to use the adapter designed by the company, specially for HP's and Dell's as they seem to be much more proprietary than other companies.
 

http://www.techspot.com/community/topics/dell-inspiron-5520-will-not-start-up.208719/
Relevancy 22.79%

Over multiple devices on the network wifi works including this laptop I m running on However any time I try to use ethernet including on this laptop there is no internet connection The error when troubleshooting is Wi-Fi Works, Ethernet Doesn't Dns server not responding While on ethernet connection Wi-Fi Works, Ethernet Doesn't I can access the networked printer but cannot access the default gateway so connection is going from room to the modem and through I have tried restarting the wifi lan modem which then connects to another router down stairs which I haven t restarted my dad won t let me I have tried flushing dns uninstalling and re installing the adapter starting in safe mode with networking This is my ipconfig all while on wifi Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c d f d a Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Ethernet Media State Media disconnected Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d d e fbb a Preferred Link-local IPv Address fe e fbb a Preferred Default Gateway DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - NetBIOS over Tcpip Disabled Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here it is on Ethernet Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Media State Media disconnected Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Ethernet Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe b c dc Preferred IPv Address Preferred Subnet Mask Lease Obtained Thursday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Any help you could give would be mu... Read more

http://www.techspot.com/community/topics/wi-fi-works-ethernet-doesnt.207715/
Relevancy 27.52%

I need to figure out how to get my webcam and camera working and what drivers I need anyone gt that answer pls
 

A:Gateway NE71B Series

Go here - http://us.gateway.com/gw/en/US/content/drivers-downloads
Then put "NE71B" in the product model box. You may also need to change the OS version to 64-bit, before a listing will show.
The camera software is listed under the application tab.
I didn't see a driver listing for the camera, so Windows may have generic drivers installed.
If reinstalling software doesn't work, I'm not sure what else to say.

Good luck with your repairs.
 

http://www.techspot.com/community/topics/gateway-ne71b-series.207366/
Relevancy 22.36%

Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.

I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.

I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.

Does anyone knows how I get back my wireless connection? Pleasee
 

A:WiFi doesn't work only with cable ethernet

Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
 

http://www.techspot.com/community/topics/wifi-doesnt-work-only-with-cable-ethernet.207136/
Relevancy 17.2%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?
 

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.
 

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 17.63%

I use a nice old Asus VW266 27" LCD monitor that's at least 5 years old.

Recently, it suddenly started taking several minutes to finally detect a signal after turning on the computer.

When the computer is off, the power light on the monitor is orange. When I turn on my computer, it blinks blue until it detects a signal, at which point it goes solid blue. This takes about 3 minutes during which time the monitor is off (no logo, no backlight).

Once the monitor finally "warms up", it suddenly detects a signal and instantly turns on (no "fade in"). I connected it to on-board video to rule out my video card. Once it starts working, it's perfect. Runs fine for hours. No flicker, no fading, no outages.

So, is my monitor dying? What might be wrong and is there a way to fix it w/o spending a fortune? (it is very hard to find affordable 16:10 monitors nowadays, so I'm not anxious to replace it.)

Thx.
 

A:Monitor taking minutes to start. Is it dying? Fixable?

I think this is easy to fix ...
Don't worry
Just some tests must be done by a technician to know what exactly is happening

You may also try to unplug the monitor after it detects the signal and reconnect it to see what will happen ... This may make it more easy to determine what is wrong
 

http://www.techspot.com/community/topics/monitor-taking-minutes-to-start-is-it-dying-fixable.205974/
Relevancy 27.52%

My Gateway NV52 keyboard randomly stops typing o, p, l, ., and (.
All f a sudden it starts working as normal. Again while I am typing, the above mentioned letters stop working.

I checked for dirt stuck under the keys but nothing was there

the weirdest thing is, I tried a USB flexible keyboard instead and that was working properly for a while and that o, l, and . stopped working on that one as well.

I am confused why it's happening., and sick of filling the blanks of o, p. l with "on-screen keyboard". Please help me to figure this out.

Thanks guys, appreciated.
 

http://www.techspot.com/community/topics/gateway-nv-keyboard-issues.206519/
Relevancy 22.36%

What the title says. I bought a TP-Link WDR4300 and installed it, and everything works perfectly on every device except for my laptop (Windows 8.1 Lenovo G480, running Windows Defender as AV). When connecting wirelessly, I get access to the router, but it shows "limited", and it doesn't even let me get into the setup page (192.168.0.1) and when I ping it, every packet is lost. Ethernet, meanwhile, works perfectly. I'd appreciate any suggestions on how to fix it.

I'd like to attach the ipconfig outputs but my command prompt is in spanish and some of the characters are missing in the .txt file, too. I don't know how to get the file in english.

@jobeard I saw one thread you solved in which you said to mention you so you could help. I'd really appreciate it. Thanks beforehand for any and all suggestions.
 

A:WiFi doesn't work, Ethernet does

Hi, You will always have to use the ethernet (Cat 5) cable to get into your router's software, at 192.168.0.1, all routers are set up like that for security reasons.
It's done that way so that no one can change your settings, passwords etc using a wireless connection, you must use the Cat 5 cable to make setup & security changes.
Did you get any setup software with the TP Link router?
If you get good internet access using Windows 8.1 using the ethernet cable, it
might point to possible wireless driver issues.
It might be worth downloading the latest driver for your WDR4300 from the TP-link website;
http://www.tp-link.es/support/download/?model=TL-WDR4300&version=V1
 

http://www.techspot.com/community/topics/wifi-doesnt-work-ethernet-does.205530/
Relevancy 22.79%

Hello everyone Been having some crazy stuff going on with this new PC that I just built I cannot get it to startup at first try I just get a black screen and the BIOS welcome try always doesn't first second/third at (but does try) up PC boot at doesn t show up and neither does the windows startup loading of course When I manually restart it Power Button long press it runs just fine I have read that thousands of things could be potentially causing this from Hard Drive to Power Supply to graphics card but my actual bet is on RAM voltages overclock causing it since I recently overclocked it via BIOS setting the default frequency at mhz which is what my RAM offers at maximum and the max that my Motherboard can read The actual voltage is set to auto via BIOS which stays at V so I m not sure if lowering or raising it will solve the problem XMP is disabled not sure if that s relevant My BIOS is up to date My graphics card is old I m planning to change it soon but I didn t have any problem in the past with it Hard drive is also old but runs just fine I m open for any suggestions Specs - Tacens Mars Gaming W power supply - AMD FX- Eight-Core - PC doesn't boot up at first try (but always does at second/third try) MSI Gaming Motherboard http thepcenthusiast com msi- PC doesn't boot up at first try (but always does at second/third try) -gaming-am -motherboa - XFX ATI Radeon HD GB DDR - G Skill Ripjaws X DDR PC - GB CL x modules of GB Dual channel in slots amp - Hard Drive SATA II WD EADS- M B TB - Win - bit Some screenshots CPU-Z confirms I m running at mhz MSI Command Center does not get accurate frequency readings Thanks in advance for all the help If I forgot to mention something please tell me nbsp

A:PC doesn't boot up at first try (but always does at second/third try)

Check and make sure the wire cables are connected properly and not loose. Also, can replace CMOS battery and see you may able to access your computer.

P.S. Also check that the hard drive connection is set to UEFI under BIOS connection settings. Windows 8/8.1 supports only secure booting.

Good luck though!!
 

http://www.techspot.com/community/topics/pc-doesnt-boot-up-at-first-try-but-always-does-at-second-third-try.205119/
Relevancy 17.63%

Hello,

I just finished assembling my first build. At first it turned on without a hitch, was able to install windows and a few drivers.

I had to restart a few times, which went fine for the first few times, and then it just didn't boot back up. The power button doesn't do anything, the fans don't start, nothing happens.

When I jump the psu, all the fans start, so I'm thinking the issue must be with the mobo..

Here's a list of all the parts I'm using : http://ca.pcpartpicker.com/p/JFVvD3

Thanks.
 

A:Mobo issue? Custom build won't start anymore

First, are any wires touching that might be causing a short such as a wire touching the back of the mobo? Second, I had something similar happen to me a few years ago with a new build. There is a tried and true though often tedious way that can help diagnose possible issues.

1. Remove all hardware except for one RAM stick from the motherboard and this includes Sata and fan connections to peripherals such as your SSD, etc,

2. Now see if the system boots with only the one RAM stick. If it boots then shut down add the second stick of RAM and then reboot. If it boots then repeat by adding a piece at a time.

3. If is doesn't boot then it is either your mobo or your power supply. Also, check to see if your heat sink is seated correctly.

BTW, nice little system there.
 

http://www.techspot.com/community/topics/mobo-issue-custom-build-wont-start-anymore.205000/
Relevancy 22.36%

Bought the following brand new at Best Buy on and trying to get setup Lenovo K e desktop tower keyboard and mouse LG MP HQ monitor MS Office key code Webroot internet security disc After connecting everything according to the instruction of both the Lenovo and LG instructions double amp triple checking all parts accounted for and connected properly here s what happened Lenovo tower up turn Monitor tower, hooked on doesn't to but boots up fine disc drive in tower opens and closes properly Lenovo keyboard and mouse both detected Great so far except LG monitor does not turn on at all In the back of the monitor two things are connected blue HDMI connector with pins on both sides is connected to HDMI connection in back of tower AC DC adapter plugged into electrical outlet and other end directly into monitor Everything works when power booted up except monitor shows no life - no light indicator and black screen Monitor hooked up to tower, but doesn't turn on Monitor just doesn t turn on at all There are driver discs for both lenovo win and the LG monitor and like I said I can insert them into the tower and close but nothing happens on the monitor display Best Buy said it should be no issue using the LG monitor with the Lenovo PC tower They will charge me to come out to my home even though I bought two year Geek Squad plan They also said I would still get charged even if they were unable to get Monitor hooked up to tower, but doesn't turn on me setup Seems like there is one probably really easy fix but I don t want to pay to have them come out if I get charged regardless of the outcome Anyone out there with any idea what could be preventing the monitor from powering up other than Monitor hooked up to tower, but doesn't turn on it s bad which is unlikely as it was brand new sealed in the box Thanks nbsp

A:Monitor hooked up to tower, but doesn't turn on

If no standby LED on monitor, is there a separate on/off switch on the side of the monitor?
With LG there are usually manual buttons for CH+- & vol +- plus On/Off (although I have seen monitors with no on/off at all.)
Also check for 'hidden' buttons on the front lower edge of frame or under the front (right) edge.
I would try a different mains lead/cord that is known to to work, also check for a fuse in the plug, could be missing, or isolated with plastic foil.
Even with no inputs the monitor would show a 'No Signal' sign if it was working.
If no 'standby' LED and you have a separate AC to DC adapter block then that could be the problem. All monitors I've seen have a direct AC connection though.
If it then does work, the on-screen menu will need to be selected, and 'input' changed to HDMI.
 

http://www.techspot.com/community/topics/monitor-hooked-up-to-tower-but-doesnt-turn-on.204715/
Relevancy 21.93%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 18.49%

Help me please my laptop Brand Nec is Cant up Start Wont start up and my laptop is not have a cd rom that is why I cant boot it when I turn it on it said We apologize etc just like below when I choose Start windows normaly It cause a Bluescreen and it turn it off again Somebody help me please Im tired to make Cant Start up my laptop okey This the writen on the black screen We apologize for the inconvenience but Windows did not start successfully A recent hardware or software change might have caused this If your computer stopped responding restarted unexpectedly or was automatically shut down to protect your files and folders choose Last Known Good Configuration to revert to the most recent settings that worked If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed or if you aren t sure what caused the problem choose Start Windows Normally Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Last Known Good Configuration your most recent settings that worked Start Windows Normally Use the up and down arrow keys to move the highlight to your choice Seconds until Windows starts Help me please please I trust you nbsp

A:Cant Start up

Can you get into the Safe Mode?
 

http://www.techspot.com/community/topics/cant-start-up.204505/
Relevancy 27.52%

Hello,
I've bought a cisco linksysX-1000. And I can't ping to the gateway. I was previously using an aztech modem but I had to flush the power on it a lot so I bought the linksys. Now, I've configured the linksys but can't ping to the gateway, whereas the aztech has no trouble. Please help.
 

http://www.techspot.com/community/topics/need-help-with-router-cant-ping-to-gateway.204450/
Relevancy 22.36%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 15.48%

Hi, so today I unplugged my computer while it was still running by accident. Now it wont start at all, no lights, no fans, nothing. I am concerned that it may be a problem with my power supply (maybe fried it or something). And no its not a problem with the cord (I tried a different one), its not a problem with the power switch (the one that you switch to either circle or line) because I tried it both ways. However recently my computers power button stopped working so my brother hooked up an old keyboard to my computer so to start it I will press a key on that keyboard and it will start up my computer, so I have to keyboards one to start the computer up and one to type. So in summary im not really sure what the problem is but im 90% sure it has something to do with either my "power keyboard" of my Power Supply so yeah. Any help will be apreciated
 

A:Accidentaly unplugged computer without shutting down. Computer will not start.

Try and get a psu off a friend who might have a extra one. Go from there. This way you might be able to narrow it down. It really hard to say what happen .
 

http://www.techspot.com/community/topics/accidentaly-unplugged-computer-without-shutting-down-computer-will-not-start.203970/
Relevancy 17.63%

when i start my computer, it goes to the gateway start page, and after a while (it's quite slow) it goes to the black page, and this is what it says:

Intel Boot Agent FE v4.1.10
Copyright (C) 1997-2003 Intel Corporation

Intel Boot AGent PXE Base Code (BA 1210BC-GW1)
Copyright (C) 1997-2003 Intel Corporation

PXE-E61 media test failure check cable
PXE-M0F exiting Intel Boot Agent

Reboot and select proper boot device or insert boot media
in selected boot device.

it just stays on that screen until i do a CTRL ALT DEL, then it goes back to the Gareway screen and after about 30 seconds finally boots up and i get the Windows XP start up page, and it opens up my desktop and i can continue .

Can anyone tell me why this started happening and how to correct it?
 

A:Computer start up is bringing up boot agent message

How old is the computer, or the hard drive. It appears you have a failed or failing hard drive.
 

http://www.techspot.com/community/topics/computer-start-up-is-bringing-up-boot-agent-message.150663/
Relevancy 22.36%

Hello all,
My friend's Windows 7 x64 ultimate machine recognizes some USB flash drives but not some other ones. The types of all are USB2 and also all drivers are installed (device manager). I don't know what is the problem. Is there any idea please?
 

A:My machine doesn't recognize some USB flash drives

USB Device Not Recognized? A Quick Fix For Windows XP/7/8
 

http://www.techspot.com/community/topics/my-machine-doesnt-recognize-some-usb-flash-drives.202702/
Relevancy 21.5%

Whenever I unplug from the router and go upstairs, I can't connect to my wi-fi. The problem also persists downstairs unless I am connected by ethernet. It's been happening for about 2 days. At first the wi-fi would jump in and out randomly and quickly but now it simply wont connect. Is it a virus or how can I fix it?
 

A:Wifi doesn't connect unless directly connected to router by ethernet cable

You might just need to restart your router / WiFI AP to resolve that issue.
 

http://www.techspot.com/community/topics/wifi-doesnt-connect-unless-directly-connected-to-router-by-ethernet-cable.202219/
Relevancy 22.36%

Hi everyone,
I've bought a Sound Blaster Recon 3D a year ago.
It works awsome ! But this morning it was off the light and cannot work while plug in any computers.
I am very bored and nervous, I think it was broken down and cannot work anymore.
Am I right ?
Please say NO and help me
Thank you very much.
 

http://www.techspot.com/community/topics/my-sound-blaster-wirless-doesnt-work.202270/
Relevancy 22.36%

My laptop doesn't work with wifi when I first open it. It will show at the bottom of the screen that it is fully connected and has full bars, but when I open the internet the pages will not open. I must restart the computer and then it will work. How can I fix this?
 

A:Laptop doesn't work with wifi

When the WiFi is active, the laptop NIC should be disabled - - easy - - just unplug the the cable to the router.
 

http://www.techspot.com/community/topics/laptop-doesnt-work-with-wifi.201724/
Relevancy 22.36%

Hi I have Toshiba Computer my External doesn't recognize HD. satellite M The original HD that came with the laptop is Toshiba MK GSX with GB storage I bought a new HD Toshiba MQ ABD with GB storage I also upgraded my RAMs - I Computer doesn't recognize my External HD. installed Computer doesn't recognize my External HD. my new HD in my laptop and installed windows XP SP I want to use my old HD as an external HD - I plugged it into the computer via USB cable but the computer wouldn t recognize the external HD - I plugged the old HD back into the computer and formatted it and installed a fresh Win XP SP - I put my new HD back into the laptop and tried to plug the old HD as external HD to see if it would work now but the computer still doesn t recognize it - I opened Computer Management and looked under Disk Management but the external HD didn t show up there - I plugged it into different USP and waited for a minute and a new icon for the external HD in my computer pops up I double clicked it and gives an error quot Please insert a disk in drive E quot Then the icon disappears I unplugged the HD and plugged it back in but the icon would show up again I waited for an hour before I plug it back on The icon appeared for seconds and then disappeared again I know it s not a hardware problem for the following reasons - When I plug in the external HD the light in the HD case turns on Red - I can hear and feel that the HD is running - I plugged the HD back into the laptop as internal HD to check if it works and Win XP shows up so there is nothing wrong with the HD Can someone please Help me how can I use the old HD as external HD and make the icon for it shows up in my computer nbsp

A:Computer doesn't recognize my External HD.

Yeah a lot of the older HDD don't work so well with the newer USB / IDE/PATA/SATA adapter kits. I am using one here with 3.5 HDD Seagate and WD to see which ones are working and not. You can hear them spin-up but that doesn't mean they're 100% okay. In your case you should try a desktop instead of the laptop USB ports might be getting duff. Like I said try a different PC see if they can be seen. External USB just get WD Passport and then transfer any data over to it from the old one. That 100GB I am sure the life on it started to go. MTB on these HDD in the past didn't live up to as promise.
 

http://www.techspot.com/community/topics/computer-doesnt-recognize-my-external-hd.199657/
Relevancy 27.09%

I have owned this computer for several years now and I have found one critical card video FX Gateway 6831-03 error it has After I Gateway FX 6831-03 video card paid for a year warranty Gateway FX 6831-03 video card just a few weeks later the video card overheated I thought this was because of the long days of gaming but I started noticing that it occurred regularly after that point about one every two months then each month and the time frame kept getting shorter until today which now I Gateway FX 6831-03 video card cannot get the video card on for any length of time I would like advise from anyone who has the knowledge how can I fix the video card best at a low cost as I am now in college paying rent and such Is it better to replace the video card or is it better to get it fixed somewhere else Would it be better to buy a new computer and move all my personal files to that computer and if so which computer is best Also is it possible to change to an nVidia Graphic card even though my computer came with an ATI Radeon originally Any advice would be much appreciated as I need this computer for both college and for my gaming and video editing past time Thank you -Emerald Mercy Moderator note Moved from this thread - http www techspot com community t -desktop-pc-review page- post- nbsp

A:Gateway FX 6831-03 video card

How often do you clean out the PC? It could be time to blow the dust out.

Have the fans been checked, to make sure they are still functioning properly?
 

http://www.techspot.com/community/topics/gateway-fx-6831-03-video-card.199388/
Relevancy 22.79%

Just picked up a Logitech HD Pro C920 and love it. Looks great...but for some reason the audio is...weird.
It sound maybe a little 'muffled'...I don't really want to say 'choppy', but it's close.
System should be more than equipped to handle everything....
i7 processor
6GB Ram
Windows 7 premium 64 bit
I know I have different USBs inside...2.0 and 3.0....but I'm not positive which is which...wondering if this would make a difference?
I'm using onboard sound instead of my old (out of date) soundcard

Really love the HD recording but I have to have better sound!
Thanks for any help
 

A:Audio doesn't sound right

Switched to the (clearly labeled) USB 3.0 didn't notice a difference.
 

http://www.techspot.com/community/topics/audio-doesnt-sound-right.198735/
Relevancy 18.06%

Hi I ve start new after installing vga? won't Games a just bought a new vga Radeon HD I had Games won't start after installing a new vga? GT before Everything was fine I downloaded the drivers played some games and everything was ok Games won't start after installing a new vga? After testing it I decided to uninstall the Nvidia drivers because it seems to me that I didn t need them anymore I did it using the programs and features in Control Panel after restarting the PC the games I tried didn t start Assassin s creed IV Black Flag when I tried to start it nothing happend and nothing changed in task manager Battlefield It says that I need directx which is weird cause I have the newest directx installed on my PC Also KMplayer won t work it doesn t show any video but plays the sound VLC and jetaudio work just fine System Games won't start after installing a new vga? Information OS Windows Ultimate SP Processor Intel Core i CPU Motherboard J amp W JW-H T-PRO RAM GB VGA Radeon HD So what should I do Thanks in advance nbsp

A:Games won't start after installing a new vga?

Tried uninstalling and reinstalling the amd drivers and it got fixed
 

http://www.techspot.com/community/topics/games-wont-start-after-installing-a-new-vga.198393/
Relevancy 22.79%

Hi guys I ve spent today building a pc for myself However on pressing the on button there s no reaction at all My machine specs are M B - Gigabyte GA- A-UD Processor - AMD RAM - Corsair Gb DDR Case - Zalman Z Graphics card - Gigabyte HD PSU - Corsair CX M W Wi-fi card also installed but can t remember the name and seem to have temporarily lost the box in a pile of packaging So far I ve checked the CPU and motherboard power sockets the wall plug sockets and the power cord to my PSU I ve also checked the connections between my case and the motherboard and these all appear to be correct on power build PC doesn't As part of this final point I switched the power on LED with the power button they both originate from the same location so thought they may be mixed up Anyhows I got a solid LED which suggests to me that a there s power running through the switch circuit and b the pc isn t booting when told to as a PC build doesn't power on solid LED would indicate PC build doesn't power on circuit completion which would be the equivalent of holding in the on button If anybody could shed any light on where to go next I d be eternally grateful currently searching the house for a paperclip to test the PSU nbsp

A:PC build doesn't power on

Does the CPU and case fans move at all, when pressing the power button?
 

http://www.techspot.com/community/topics/pc-build-doesnt-power-on.198098/
Relevancy 22.36%

Hey,,how are the things,,I have a problem,my dvdrom doesn't read any empty disks.I tried some disks that has things on it..all of them worked.only the empty disk doesn't work.I bought another disk and it still not read,,what to do ? :/
 

A:DVD-Rom Doesn't Read Empty Disks

Question: Do you have a DVD Rom or a DVD burner? If you have a DVD burner then it should be able to read the blank disks so that you can add files to it. But if you insert a blank disk into a DVD Rom drive (that does not have burning capabilities) then it might not read the disk because it contains no information to read.
 

http://www.techspot.com/community/topics/dvd-rom-doesnt-read-empty-disks.198089/
Relevancy 21.93%

I wanted to get more RAM for my older PC (CPU Q8400 on Asus P5P43TD PRO). The motherboards' specs say it works with 1600Mhz RAM so I bought 8GB of Kingston HyperX Blu (Kit 2x4GB), code KHX1600C9D3B1K2/8GX.

I already have the latest version of BIOS but it doesn't POST for the life of me (fans are working, black screen, no beeps). I tried inserting only one stick (tried all 4 slots). I tried both sticks in slots 1 and 3, both sticks in slots 2 and 4, still no luck.

When I put back my old RAM (2x2048 Kingston Value RAM) it works just fine. Everything in BIOS is set to AUTO. I tried increasing the RAM voltage to 1.65v as specified on the new sticks without success.

I'm sure the memory is fine but I just can't get it to work. Any suggestions are greatly appreciated!
 

A:Asus P5P43TD PRO doesn't POST with new HyperX 1600 RAM

You may need a BIOS update. CPU and Memory compatibility updates are common BIOS updates. Before you give up on the RAM modules, try updating your BIOS.

ASUS Support For P5P43TD PRO

Caution though, follow the instruction carefully. The updating can not be interrupted once started. It only takes a few minutes to complete, but any interruption can brick the motherboard if it is not equipped with a backup BIOS.

I just recently bought a motherboard I thought was completely dead (same symptoms as your board, no post). I never suspected the motherboard wouldn't recognize my i7 CPU. The tech guy had me use an i3 to flash the BIOS. Low and behold the BIOS update worked.
 

http://www.techspot.com/community/topics/asus-p5p43td-pro-doesnt-post-with-new-hyperx-1600-ram.197939/
Relevancy 22.79%

The n key had been not working properly and now it stopped all together. I took the key off and tried pressing the white piece of soft plastic but nothing shows up. Is it time to get a new keyboard or is there something else to try? It seems like such a waist to throw out a keyboard when 1/100+ keys stopped working.
 

A:1 key on keyboard doesn't work

Try it on another PC and see.
 

http://www.techspot.com/community/topics/1-key-on-keyboard-doesnt-work.197264/
Relevancy 17.63%

Hi,

I have Windows XP SP3 installed on my desktop and suddenly my LAN/NIC is not receiving and sending packets from my network. The DHCP Client Services and TcpIP services wont start it gives error from the above.

From the device manager of non-plug and play drivers, the tcpip protocol driver, ip network address translator and netbios over tcpip has exclamation point. When I uninstall the drivers and start the services the connection is established but when I shutdown/restart the PC it will came back again the issue.

AFD is running

Below drivers are present in system32\drivers folder.

afd.sys
tcpip.sys
netbt.sys
Any ideas?
 

A:DHCP Client Service Won't Start - Error 1068

Hello,

I update the system and the LAN driver but still the issue exist.

I copy the netbt.sys from a working machine and paste that to the non-working machine. Same problem.

Is there other way resolving this issue aside from repairing or fresh install of the OS?
 

http://www.techspot.com/community/topics/dhcp-client-service-wont-start-error-1068.197233/
Relevancy 27.52%

I have a Gateway Laptop with Windows 7 and a built in HD camera. If I am video calling on Yahoo or wherever the cam works fine, but it does not show up on my Control Panel items I.e. "devices and printers". However under Device Manager is does show up and says it is working properly. However since it isn't listted in my devices and doesn't show up when I searh "all programs". I can only use it when I am video chatting in Yahoo IM. Otherwise I can't find it and therefore cannot bring it up
 

A:Cam on my Gateway Laptop

What is the model # of your Gateway. I would expect that when you double click and open Computer the device should be there as well.

Also, have you looked at Gateway's site under Support for your computer model # to see if any special apps are offered for your cam?
 

http://www.techspot.com/community/topics/cam-on-my-gateway-laptop.196997/
Relevancy 22.79%

I don t get why my touchpad doesn t work when I unplug or turn off my mouse I found all the settings I realize I may get an answer I don t want Download drivers etc I can live with this problem unless I suddenly don t have my other laptop especially after spending the night searching for downloading and installing drivers for doesn't work Touchpad my other laptop I was surprised to find that the windows professional my home machine is windows home didn t provide me with network and Touchpad doesn't work other drivers I wasn t seeing any wireless connections Initially I was using an internet stick and the problem wasn t visible I take that machine out with me I had it home last night and that s when I found the problem And trying to get that touchpad driver had me wondering about this one I don t use my laptop keyboard on my home machine preferring a natural contour full keyboard I plug in so I never deal with the touchpad otherwise I d be hitting it all the time which I used to do I am a mouse guy If I had to to take this machine out the touchpad thing would drive me nuts Any thoughts nbsp

A:Touchpad doesn't work

Hi Aarby,

Some computers have keyboard shortcuts which could be a separate key on the keypad or a combination of the Fn + any other Function key depending on the system model for enabling or disabling the touchpad. Since you have not mentioned the system model of your computer, some steps you may try are:

1.Go to Control Panel > Mouse > Device Settings>Click Enable (if disabled).

2.Check under Mouse Properties in Control Panel>Hardware>Mouse. There may be a check-box for Disable Touchpad/Pointing Stick when external USB mouse is present. If this is checked and you connect an external mouse to your laptop, the touchpad may be disabled.

Additionally, we recommend you check the system manual or try some of the steps mentioned in the link below.

Click on this Microsoft link to troubleshoot Mouse, touchpad, and keyboard problems in Windows: http://dell.to/1arqGvz

Hope this helps resolve the issue. Please reply if you have further queries.

Thanks & regards,
Babita G
#iworkforDell
 

http://www.techspot.com/community/topics/touchpad-doesnt-work.197125/
Relevancy 27.09%

Hi
I get this DSL line into my house. It goes to the "DSL" connection on a Thomson TG546v-v7 Gateway. Then, a LAN cable goes from the "Ethernet" 1 connection on the Gateway to the "Internet" connection on a Linksys WRT54GH Router. The Internet Connection Type on the Router is set up as Static IP.

I'v read that the Gateway is to communicate between different network layers.
But would it be possible to set the Gateway up as a Router also?

When I connect my PC to the Ethernet connection on the Gateway, I get no IP and stuff, making it impossible to access the Gateway. How can I access a Gateway, without knowing IP?

Hope you can help me eliminate the Linksys Router, and get the Gateway to work as a router also
 

A:DSL line - Gateway - Router - PC (internet)

Hey SirBlaBla. Your Thompson gateway is a combo DSL modem and wired mode router. Just connect your pc to one of the 4 LAN ports on the Thompson. You might have to call your ISP if specific settings need to be changed because you are using DSL. If your phone service comes in over this DSL line, make sure you use a splitter to split the signal, with one side going to the Thomson, and the other side going to your phone. If used in this way, make sure you use a DSL filter after the splitter on the line that goes to your phone so it removes the DSL signal from reaching your phone. This Thompson unit does not have wireless capability, so all pc's must be connected by Ethernet cable.
 

http://www.techspot.com/community/topics/dsl-line-gateway-router-pc-internet.197068/
Relevancy 27.52%

I'm looking at a HIS Radeon HD 7950 for my computer and I'm curious if it would be the right choice to play new games at high to ultra settings? Suggestions?

Gateway FX6800-01e specs
Processor / Chipset

Type Intel Core i7 i7-920
Max Turbo Speed 2.93 GHz
Number of Cores Quad-Core
64-bit Computing Yes
CPU Qty 1.0
Max CPU Qty 1.0
Processor Main Features Intel Turbo Boost Technology, Hyper-Threading Technology
Chipset Type Intel X58 Express
Cache Memory

Installed Size L3 cache - 8.0 MB
Cache Per Processor 8 MB
RAM

Installed Size 6GB
Technology DDR3 SDRAM - Non-ECC
Memory Speed 1066.0 MHz
Memory Specification Compliance PC3-8500
Form Factor DIMM 240-pin
Features Unbuffered, Triple channel memory architecture
Configuration Features 3 x 1 GB
Hard Drive

Capacity 1.0
Interface Type Serial ATA-300
Spindle Speed 7200.0 rpm
Graphics Controller

Type Plug-in card
Graphics Processor / Vendor ATI Radeon HD 4850
Video Memory 512.0 MB
Power

Device Type Power supply
Power Provided 500.0 Watt

 

A:Gateway FX6​800-01E Upgrade

The power supply you have is the bare minimum a 7950 requires. Make sure your case has enough airflow for the GPU and make sure you have 2 six pin PCIe power connectors free on your PSU. I would also recommend upgrading your RAM. A 7950 + i7 920 probably wont be able to play games at MAX, but very close to it (if you have 8GB of DDR3).
 

http://www.techspot.com/community/topics/gateway-fx6%E2%80%8B800-01e-upgrade.197118/
Relevancy 22.36%

Hi
I know this topic is very old! but I have the same problem now!
But I don't have any other hard disc on my PC and this SATA 3 supported hard drive is only one! I don't have any OS on my pc. when I connect hard drive to my p4p800-x mother board it doesn't recognize my sata 3 drive! please help me what should I do!
 

A:Motherboard doesn't recognize my SATA 3 drive

Hey Andromec. Is the drive being detected in the BIOS.
 

http://www.techspot.com/community/topics/motherboard-doesnt-recognize-my-sata-3-drive.197021/
Relevancy 22.36%

I had wireless internet with AT&T and everything was fine. Today I switched to Bright House and my laptop will not connect wirelessly to the router. I am able to use the ethernet cord to connect and my mobile devices connect to the wireless network with no problem. Please help ! My computer is an Acer and is operating on Windows 7
 

A:Ethernet works, wireless doesn't

Hey Ashp10. You had AT&T as your ISP, but now you are using Bright House, correct?. Did you have your own router when with AT&T or were you using a combo modem/router provided by them. How about with Bright House, are you using a box provided by them or are you using your own router?.
 

http://www.techspot.com/community/topics/ethernet-works-wireless-doesnt.197034/
Relevancy 18.06%

Hi, I recently bought a new laptop from other country, its brand new. Lenovo c580 with 6gb ram and 1tb hard drive. when I click on Start button, nothing happens, the laptop doesn't start. I tried to charge it, but still no luck. I can see battery is charging but it doesn't start
Any ideas?
 

A:Lenovo c580 wouldn't start

Sorry its lenovo g580
 

http://www.techspot.com/community/topics/lenovo-c580-wouldnt-start.196294/
Relevancy 18.06%

Hi guys.
I have problem in starting my Laptop,window could not start normall I got black screen infront
of me whenever I start it so I have to ctrl+Alt+del to start it then thats the time windows is up and
running.What seems to be the problem?Please help I no idea in this issue
 

A:Windows 8 start up issue

Hi Bonmar,

It may be possible that Secure sign-in requiring all users to press Ctrl+Alt+Del is enabled on your computer. This generally provides an additional layer of security to protect the system.

In order to disable this option, please try the following steps:

In the Start screen, type netplwiz in the Search box, and then press ENTER.
Administrator permission is required. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Click the Advanced tab, un-check the "Require users to press Ctrl+Alt+Delete" check box, and then click Apply/Ok.
Hopefully, this may resolve the issue for you. Please reply if you have further queries.

Thanks and regards,
Babita G
#iworkforDell

For easy access to drivers, manuals and product updates, please visit our Support Site .
 

http://www.techspot.com/community/topics/windows-8-start-up-issue.195528/
Relevancy 26.66%

I have a Gateway, model ID49C. I bought it new about 3 years ago but replaced its battery less than a year ago.

This phenomenon has been happening for more than a year: When I plug in my computer to charge, sometimes the front power light (orange when charging) and the light for the power button start flashing in unison and the computer stops receiving charge. It immediately stops when I unplug the computer. This only seems to happen when the computer is open -- I can still fully charge it overnight. Lately it's started to happen so often that my computer can barely charge at all from the number of times I have to unplug it.

Does anyone know what's going on, or where I could look to find more info? Thanks for your help!
 

A:Gateway: Power light flashes when charging

Try another AC adapter...
 

http://www.techspot.com/community/topics/gateway-power-light-flashes-when-charging.193876/
Relevancy 18.49%

I issues start New up gpu have a Dell Inspiron gb RAM i - New gpu start up issues ghz processor I recently upgraded my psu and gpu My gpu is a visiontek RadeonHD gb The power supply came in first so I installed it a couple days earlier still no issues with it The GPU however booted up fine the first time messed around on a game for about an hour I went to check for driver updates halfway through the update the screen went black I plugged it back in the the onboard graphics uninstalled the drivers re installed Now the only way to get it to display through the new card is to start up with the onboard then switch plug ins while the computer is on Also I have tried disabling the onboard graphics and this didn t fix it either Long story short I now get nothing but a black screen when trying to load with the new gpu I know its not a very good graphics card I plan on ordering a new one today if the issue is with my gpu and not the mother board nbsp

A:New gpu start up issues

What drivers version are you using? Are you using a recent release, or are you using an older version? You stated that you uninstalled and then re installed the drivers, but did not mention what version. AMD Catalyst has some new beta drivers out that might not be fully compatible with all video cards. Have you tried to use older drivers and see if you still have the same problem?
 

http://www.techspot.com/community/topics/new-gpu-start-up-issues.192902/
Relevancy 17.2%

So my laptop has started to freeze a minute or two after start up even though it was working fine a few hours ago hours laptop working fine freezes up, after a VAIO start Sony was few ago I was sat talking to a Sony VAIO laptop freezes after start up, was working fine a few hours ago friend over facebook chat when my laptop started screaming with a really high pitched noise I had Sony VAIO laptop freezes after start up, was working fine a few hours ago to turn it off to stop it When I restarted it and booted it back up it said it was defragging something Sony VAIO laptop freezes after start up, was working fine a few hours ago it was a while ago and I cant remember what it said after that I logged in and now it freezes after a couple of minuets I ve tried system restoring it and using the built in memory repair and it still wont work However once I disabled all the non microsoft services it boots up and doesnt freeze untill I try to open a program I can start it in safe mode but thats about it I ve spent the past couple of hours searching for a solution but can t find one so ay help will be much appritiated I m using my Xbox to access the internet at the moment but I can turn on my laptop incase anyone has a possible solution nbsp

A:Sony VAIO laptop freezes after start up, was working fine a few hours ago

Try running Memtest86 a few times and tell me if any errors come up.
 

http://www.techspot.com/community/topics/sony-vaio-laptop-freezes-after-start-up-was-working-fine-a-few-hours-ago.191245/
Relevancy 22.79%

I have a very "Strange" situation. I had my 465gb Verbatim USB flashdrive plugged into my XP Pro & forgot it was plugged in so I rebooted. In the process of it rebooting, the loosely connected connecting cable fell off disconnecting it.
Once it booted back up, I reconnected it but now it don't exist on the XP. Don't show up in my computer nor when I click the "safe to remove" icon yet I hesitantly plugged it in my W7 & it shows & everything is good.
Did I mess something up on my XP?
 

A:USB flashdrive doesn't show up in XP

learninmypc said:





I have a very "Strange" situation. I had my 465gb Verbatim USB flashdrive plugged into my XP Pro & forgot it was plugged in so I rebooted. In the process of it rebooting, the loosely connected connecting cable fell off disconnecting it.
Once it booted back up, I reconnected it but now it don't exist on the XP. Don't show up in my computer nor when I click the "safe to remove" icon yet I hesitantly plugged it in my W7 & it shows & everything is good.
Did I mess something up on my XP?Click to expand...

I've run scans (Avast,mbam & SAS) on it & they came up clean.
 

http://www.techspot.com/community/topics/usb-flashdrive-doesnt-show-up-in-xp.190220/
Relevancy 21.5%

Step 1: I clicked start and my computer
Step 2: I right clicked my DVD-RW drive and clicked properties
step 3: I clicked the recording tab... I should be able to click DVD-RW drive as the default recorder but the ONLY default recorder I have listed is the C: drive which is my hard drive...

How can I fix this?
 

A:DVD/CD-RW drive reads disks with content but doesn't read blank discs

Somebody please help me...
 

http://www.techspot.com/community/topics/dvd-cd-rw-drive-reads-disks-with-content-but-doesnt-read-blank-discs.190318/
Relevancy 22.36%

Hi I recently tried to install a Kodak Phe rinter on my laptop however when I was installing the printer the Laptop crashed and gave me a BSOD I on devices doesn't recognize USB laptop unplugged everything re-booted the laptop and still got the BSOD I was able to solve this by doing a simple system restore under safe mode So far so good however USB doesn't recognize devices on laptop Everytime I try to plug in a USB device into either of my USB ports windows says that the device has not been recognized and is malfunctioning and windows has stopped it There is clearly power going through the ports as if I plug in Wireless adapter the light USB doesn't recognize devices on laptop on the device comes on I have checked under the Device manager and it shows that the hardware is working properly I have checked in the registry and the USB ports are set to quot quot under the start option which means that the USB should start as normal My laptop is an aspire running windows home premium Just wondering if I have missed anything out somewhere thanks in advance Ronan nbsp

A:USB doesn't recognize devices on laptop

Hey odriscoll27. I assume your USB ports were working before you tried installing the Kodak printer. Do any USB devices now work in any ports?. Don't connect that printer to any other pc until you find out what caused this. I would first try uninstalling the ports in Device Manager, then reboot and let Windows reinstall the drivers and hopefully it will work. If it does work, check/try another printer cable and try installing it again. Is your Win7 OS at the SP1 level?.
 

http://www.techspot.com/community/topics/usb-doesnt-recognize-devices-on-laptop.189933/
Relevancy 17.63%

I powered down the machine yesterday (Shut Down) and now this morning the computer will not boot.
When I try to boot the machine the BIOS screen does not appear, the HD light flickers on but then stays off. All other lights on the machine are on as normal. The fan kicks in within 30 seconds and sounds like it's running at maximum revs.
I did a hard reset and reseated the HD and the RAM and replaced the RTC battery without fixing the issue.
I will disassemble the unit and make sure the fan is not clogged, in the meantime does anyone have any thoughts ?
TIA
Arfer
 

A:HP Pavillion DV6700 will not start, no BIOS screen just black

The motherboard has probably failed do to consistent overheating over time...
 

http://www.techspot.com/community/topics/hp-pavillion-dv6700-will-not-start-no-bios-screen-just-black.189056/
Relevancy 22.36%

Good morning Techos!

I was wondering if you guys could lend some help at me regarding the HP g61 laptop.

1. When the pc boots, there are hang ups I experience:
a. At start, I just see a black screen with a small underscore character in the top-left,
b. Starts, sees Hp logo, then boots, and hangs up at windows 7 logo with "Starting Windows" caption.
c. Tests, Start-up tests, run-test, hdd test and memory test in the hardware test but hangs in either of them two.
d. Boots up, sees "Windows Error Recovery Screen" page, and hangs (hangs at 30 sec countdown)

2. I am suspecting that the processor is somewhat damaged already, because I tested the HDD and RAM on my other laptop, it works just fine. Please advise if there are ideas that springs up on your mind. It will be a waste if it will not be resolved. Thank you Techos!!
 

A:HP G61 laptop doesn't boot properly

Is this a new laptop still under warranty or not?
 

http://www.techspot.com/community/topics/hp-g61-laptop-doesnt-boot-properly.189666/
Relevancy 26.66%

I just switched ISPs and now have a Pace HGV gateway TV amp internet which I ve connected to a Cisco Linksys E wireless router router to gateway Connect wireless 3801HGV I have the cable plugged into one of the gateway s ports and the other Connect wireless router to 3801HGV gateway end into the WAN internet port of the wireless router I find that I lose the internet access periodically and need to quot Connect wireless router to 3801HGV gateway reboot quot my E to restore internet access Why is this occurring and how can I rectify this I did not have this problem when I had my cable Connect wireless router to 3801HGV gateway modem plugged into the E I want to keep my network setup from the E to my wired and wireless computers so don t want to use the wireless built into the gateway I m relatively new to this so please let me know what settings to make on the gateway etc I m able to access the configuration menu on the gateway but not sure what to change Thanks very much for any help -G nbsp

A:Connect wireless router to 3801HGV gateway

Linksys E2000 wireless routerClick to expand...

That's a dual-mode capable device (5ghz/2.4ghz)
and the comments are

# Pros:
Very fast setup. Great 5 GHz throughput. Decent 2.4-GHz throughput. Simple setup great for newbies.
#Cons
Some performance degradation with use. Throughput drops off quickly with distance
## Bottom Line
This router's best assets are its ease of setup and throughput at the 5 GHz band. It's best for those wanting to cover smaller spaces, however, as its long-distance performance isn't stellar.




Pace 3801HGVClick to expand...

that's a B/G mode device with user controlled RF Power settings

HyperG Wireless Functionality
802.11g wireless access point, backwards compatible with 802.11b
10 power settings available through gateway user interface,
up to 400mW, for both 802.11b and 802.11g, configurable via CMS
WEP64, 128, WPA, 802.1x
Multi-SSID
With two WiFi devices, they will interfer with each other on the G-Mode which is
common between your devices and the most likely the mode your systems are using.

Here are your choices

Move all your systems to the N-Mode 5gz, but only if they all can support N-Mode.
Disable the Pace 3801HGV WiFi portion and you should be able to leave all the systems as-as

 

http://www.techspot.com/community/topics/connect-wireless-router-to-3801hgv-gateway.177975/
Relevancy 18.06%

I left my HP elitebook 6930p idle for 5 hours, after which I noticed that I cannot open any applications. When I try to open an application via clicking an icon, my laptop won't respond (even notepad won't open). Note that the hard drive indicator drive is surprisingly inactive during that time. I can open windows explorer though, but it takes some time to load a page. The screen does not freeze (I can sitll move my cursor), but when I attempt to shut down it gets stuck on the wallpaper before fading [supposedly] to the loading screen. Please help!D:
 

A:Applications won't start (even Notepad!)

UPDATE: I noticed when the network adapter was off the laptop ran fine. When I turn it on, everything slooows down, and the things above happen
 

http://www.techspot.com/community/topics/applications-wont-start-even-notepad.189423/
Relevancy 22.36%

Hi I have installed a DVD player burner in my sons computer but when we try to boot up it comes up insert Diskette,I thought maybe it is the jumper on the DVD player moved it to all positions still no joy.If I take the DVD player out the computer boots up and starts fine.I tried changing the boot order as well still wont start up.I only know a small amount of knowledge of computers so any ideas to fix this problem.Regards Martin.
 

A:Computer doesn't boot with DVD player connected

Jumper and diskette? Is this an old computer w/ a disk drive? With disk drive and DVD player connected with a flat wide ribbon cable (IDE)?
 

http://www.techspot.com/community/topics/computer-doesnt-boot-with-dvd-player-connected.189420/
Relevancy 22.79%

Hello When I try to plug in my external hdd in usb a strage sound come from it like clock ticking It doesn t appear my HDD computer doesn't appear in Exeternal in my computer neither in disk management I can see it though in device manager gt disk drives It also doesn t appear in bottom right at safely remove After I terminate explorer and start it again it appears there too Another behavior is that in the past when I was trying to boot it was blocking the procedure and wouldn t let me in unless I unplug it and restart it was working afterwards if I plug it in while I am in windows It seems that bios dont recognize this hdd either The problems with this hdd started when I bought a new pc months ago I think I never had problems in my previous pc IS there anything I can to Exeternal HDD doesn't appear in my computer fix it I never hit it or moved it from its position thank you for your time nbsp

A:Exeternal HDD doesn't appear in my computer

Sorry to say it, but the drive has failed. The clicking sound is known as the click of death. In some cases it can be fixed, but it usually involves opening the actual hard drive, which is definitely not recommended and can easily damage it further.

If the drive is still under warranty, you may be able to send it back to the manufacturer where they can recover your data and replace the drive for you.
 

http://www.techspot.com/community/topics/exeternal-hdd-doesnt-appear-in-my-computer.188986/
Relevancy 18.92%

Hi all

I have H61M-ITX board with 1 x PCI Express 3.0 x16 slot (blue @ x16 mode)
http://www.asrock.com/mb/Intel/H61M-ITX/

I wan to install there PCI Express x 4 card:
http://dektec.com/Products/PCIe/DTA-2144/index.asp

I made clean Win XP SP3 install + all MB drivers on top. After I inserted pcie x4 card and boot up. Win XP didn't detect the card (though leds on card are blinking from periodically)

I then tied LAN adapter I have to check if all is fine with MB. I took this one:
http://www.tp-link.com/en/products/details/?categoryid=235&model=TG-3468

same behaviour - system doesn't see it but if I plug eth cable then leds on lan card blink.

please tell me what is wrong I do? I checked bios for anything related to PCIe and found nothing.
 

A:PCIe x4 card doesn't run in PCIe x16 slot

Have you tried updating your Intel chipset drivers? They can be found at Intel.com in the download center. They would have updates for the PCIe drivers and other assorted H61 chipset features.
 

http://www.techspot.com/community/topics/pcie-x4-card-doesnt-run-in-pcie-x16-slot.189103/
Relevancy 17.63%

Hi all got above named laptop but when I turn it on it freezes every time when it get to the black screen where it says start windows normally or other options such as safe mode etc is this hard drive failure thanks in advance
 

A:Acer Aspire One freezes at 'start Windows normally' screen

Update-- on black screen if I click on safe mode or safe mode with networking it does its thing but then after loads of things it just restarts back to that screen if I click last known config it get to the loading windows screen then I see a hint of blue screen then it restarts back to black screen start windows normally screen
 

http://www.techspot.com/community/topics/acer-aspire-one-freezes-at-start-windows-normally-screen.188714/
Relevancy 18.06%

Spent about 10 hours trying to resolve a network printing problem on a laptop today and now I am asking for your help. The HP laptop stopped printing with the message "Print Spooler is not running". I tried starting it at services.msc but it will not start. I tried uninstalling the printer from add/remove and could only remove the printer applications but the driver will not uninstall because the print spooler is not running. I tried reinstalling the printer but it will not because the spooler is not running. I tried installing a different printer with the same failure. Microsoft FixIt identified the spooler as not running, tried to start it and it failed immediately. FixIt said it could not help. I checked windows update and it is up to date. Printers work with 4 other pc's on the network. OS: Win 7 Pro
 

A:Print Spooler will not start

Treat it as if there are jobs in the print queue that can't be deleted. As I recall you delete the subdirectory in the Spooler directory used for that specific printer.

Try running this troubleshooter

=== Update ===
Here's another Wizard
 

http://www.techspot.com/community/topics/print-spooler-will-not-start.187291/
Relevancy 27.52%

I just replaced the Motherboard today for a customer, it worked just great! I went into the bios and recalibrated the battery. Problem is that I think it burnt out the laptop because the laptop will not power on at all, just like before I replaced it.

What I ment was that I think calibration caused the burn-out of the board
 

A:Gateway M-Series will not power on

Laptop motherboards can fail quickly. Was this a new or used board. I really doubt that a battery calibration would damage the motherboard. Have you tried starting the laptop with the battery out?
 

http://www.techspot.com/community/topics/gateway-m-series-will-not-power-on.188228/
Relevancy 18.49%

Okay so I have a dell d610 - and when it is on it runs perfectly mine so much so that I can play a game online sync photos and download from iTunes - but when it get shut down if doesnt come back on for at least 3 hours and at most a whole 24 hours. The battery light just does a slow green flash and when I check it it says its fully charged. When I press the power button the little indicator lights will come on and the screen gets ready then after like three seconds it all goes off again. So far this is the longest it's been off which is going on two days now. I'm not sure if I explained clear enough but any help would be greatly appreciated.
 

A:Laptop will not start

When it switches on, does the screen show anything such as a logo or some sort of way into the BIOS? It could be an overheating issue especially with the processor where the fan has failed. To stop the processor from destroying itself by overheating depending on the make, it can sometime shut itself down atomatically. How old is the laptop? Check that the fan is working (normally makes a small noise with hot or cold air coming out and is generally located on the upper part of the keyboard section on the laptop.
 

http://www.techspot.com/community/topics/laptop-will-not-start.188134/
Relevancy 27.09%

My teenage son enjoys online gaming with his
Gateway FX6800-01e
CPU is an i7 920@ 2.67GHz
System RAM is 6GB
The OS is Vista Home Premium 64 bit
Current card is Radeon HD4850 w/512MB

He doesn't complain but I wondered if a faster card would work with this system, since he's a great kid with a rather sparse Christmas wish list..
I'm always hesistant to fix something that isn't broken but if it will noticably beef up his online gaming, then I'm sure it would make his day.
Thanks, in advance.
 

A:New graphics card Gateway FX6800-01e?

If the graphics card is a radeon 4850 u can definatly upgrade to the newer versions eighter a 7850 or a 7870 would do u wonders im worried abit about the cpu it is a core i7 and it is good but future proof enough for ur taste???
 

http://www.techspot.com/community/topics/new-graphics-card-gateway-fx6800-01e.188114/
Relevancy 21.5%

Hi I had some issues with a HDD around this time last year so I replaced it with a new western digital HDD I wasn t able to back anything up so I cloned it instead turns out I installed the incorrect driver for my video card and suffered from the BSOD syndrome well I finally got that sorted out I think and now I am trying relentlessly to get catalyst pro control center to work properly Ive read numerous places online that involves editing Catalyst work doesn't Center after I driver wrong installed the Control the Assembly folder but I have no such keys in there when I try and run CCC it tells me that I am unable to run as I wouldn t be able to change any settings within the app basically Ive tried uninstalling installing trying ATI opposed to AMD- to Catalyst Control Center doesn't work after I installed the wrong driver no anvil I know for a fact that I had CCC on this pc but it almost seems impossible to get up and running I am very desperate to get this up and running thanx in advance nbsp

A:Catalyst Control Center doesn't work after I installed the wrong driver

Hhhmmmm... let's take a look

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Attach it to your next post by clicking the Upload a File button

 

http://www.techspot.com/community/topics/catalyst-control-center-doesnt-work-after-i-installed-the-wrong-driver.187782/
Relevancy 22.36%

Hi all
I have just noticed that my keyboard doesn't work on certain screens. Specifically the system restore screen where I have to label the restore point. I cant type anything in. I don't get the blinking cursor in the input box. I get the italic I cursor when I put the arrow cursor in the box but when I left click to anchor the cursor and start typing nothing happens. So maybe a mouse problem too. I noticed it in a software registration window too. Running windows xp sp3. microsoft usb keyboard and a wireless logitech mouse
Thanks for any help
 

A:Keyboard doesn't work on certain screens

Change batteries?
 

http://www.techspot.com/community/topics/keyboard-doesnt-work-on-certain-screens.187413/
Relevancy 18.49%

Hello people Today I found a old laptop of mine in a box I thought lets connect start HP won't DV5 1050ed it to the wall and fire it up After trying to do this without succes I realized HP DV5 1050ed won't start me that was the reason why I putted the laptop in the box I ve been searching over the internet for solutions but none of them works My problem is Whenever I plug in the AC adapter into the DC Powerjack the light beside it goes on and STAYS on its not blinking at all and no else leds are blinking I know what all those blinks mean but it doesnt help me HP DV5 1050ed won't start at all When I push on the power button nothing just happens I remember that the laptop could be really hot at a time so maybe HP DV5 1050ed won't start its an overheating problem People told me that I have to disassemble the laptop and put the motherboard into a oven because then somehow it will be reflowed or something List of things I tried but not working -Battery out AC out and then hold power button for like - seconds and then plugin the ac and then try to start -resetting bios stuff with getting the ram memory sticks out n stuff -getting the hdd out and stuff like that All those things like described on the internet not worked at all So thats why I came here to get some help from you nice guys Greetings nbsp

A:HP DV5 1050ed won't start

Is the laptop making any noise at all? Do you have the model number etc?
 

http://www.techspot.com/community/topics/hp-dv5-1050ed-wont-start.187171/
Relevancy 22.36%

My integrated webcam doesn't work
 

A:Integrated webcam doesn't work

What is the make and model of the device the webcam is integrated into?
 

http://www.techspot.com/community/topics/integrated-webcam-doesnt-work.187058/
Relevancy 26.66%

Really hoping somone may have done an upgrade to ever do Gateway FX card 540S? for a graphics upgrade Anybody their FX S to help me out on this or someone who can tell me exactly where to connect the additional power source to on the computer side Doing a graphics card upgrade for my Gateway FX S from the existing Nvidia GeForce GS to a GTX I cannot figure out where to get the additional power source on the computer side to go to the pin card port Done a lot of research without any results There are some vacant connectors in the case couple of vacant six pins on one end and a vacant plugin connector near the card I also found some info that said you can t change the existing card out on this Gateway model Nvidia support said it will work I just don t know where to connect the additional PS connectors Thought this upgrade was a slam dunk just don t want to connect it up wrong and fry something Appreciate any help nbsp

A:Anybody ever do graphics card upgrade for a Gateway FX 540S?

Well when upgrading GPU's in a manufacturer-made computer, you almost always need to upgrade the PSU with it.
If I'm not mistaken, the 660 has 1x6-pin power connector. If your PSU has a cable coming out of it with a 6-pin connector, try plugging that in.
You'll also need to make sure your motherboard has an applicable x16 PCIe port.
Maybe take a picture or two so we can get a good idea what we're looking at.
 

http://www.techspot.com/community/topics/anybody-ever-do-graphics-card-upgrade-for-a-gateway-fx-540s.186866/
Relevancy 22.79%

I recently bought a loudspeakers system...but I have some problems...At first the subwoofer was working properly but then it stopped working.The next time I used it was working again and now still not working so sometimes it works and some other not...What should I do? Thank you in advance
 

A:Subwoofer doesn't work sometimes

Can you give us more information on the equipment you are using?
 

http://www.techspot.com/community/topics/subwoofer-doesnt-work-sometimes.180613/
Relevancy 27.09%

This is probably a dumb question, but is there any way to add a port (there are currently 4) to my ATT gateway? I just got a verizon network extender and it, too, needs a place to be plugged in and I am out of ports. Do I need a new gateway?

Thank you ,

jim
 

A:Adding a port to 3801HGV Gateway?

Do I need a new gatewayClick to expand...

NO.
you can use a HUB or a SWITCH - - the latter is a better choice. neither use an IP address.
wiring is like

Code:
(uplink.wan.port)existing.router(one.lan.port)----(any.port)new.switch(3 more ports)
If you need to add WiFi, then use the same wiring as show, but get a WiFi router. Come back here and
we will help you config that choice.
 

http://www.techspot.com/community/topics/adding-a-port-to-3801hgv-gateway.186085/
Relevancy 22.79%

Lite-on dvdrw sohw 1633s

'Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)'


ide-dvd rom 6116

'Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)'


both devices open but do not recognise that any discs are in
 

A:CD/DVD drive doesn't work

Have you tried going to the manufacturer's website and downloading the drivers for your drives? Re installing the drivers would repair the registry information that it is having trouble with.

Hope this helps

~Alex
 

http://www.techspot.com/community/topics/cd-dvd-drive-doesnt-work.185639/
Relevancy 39.56%

Long story short Received my new laptop on Monday and I installed Windows and the Drivers on Tuesday I was able then to connect to the internet wirelessly in another room in my house My router is a year old wired Linksys G router and in order to provide wireless in my home I set-up a TrendNet Access Point N a year and a half ago Though there are times that I need to periodically reboot we can access the internet anywhere in the house on our laptops The laptop at the beginning connected fine recognizing the TrendNet and the signal was strong I then installed Windows Updates Microsoft Essentials and the latest Adobe Flash By the way the W firewall was enabled from the beginning After a time I shut it down but when I came back this system will not connect at all It shows that the system is connected to the Access Point with a strong signal but when I go to connect to the internet wirelessly Brand at it the start, now worked Wireless doesn't new laptop: it constantly says that there is a problem Diagnosis says it s my modem access point or router So I reset them at least five times but nothing has changed Besides my two PC s have no trouble connecting to the internet Two Lenovo laptops have no trouble connecting to the internet throughout the house I even fired up my year old Toshiba Tecra S using a TP Link USB adapter at the opposite end of the house and it connects Diagnosis diagram shows connection from Access Point to laptop but no connection from laptop to internet I did a system restore as I only installed the Adobe Flash and Microsoft Essentials When it finally rebooted the only thing I reinstalled was MSE I even set things to default But the problem persists The Device Manager recognizes my wireless card and reports Brand new laptop: Wireless worked at the start, now it doesn't that it is functioning properly With one exception the Intel Wireless Pro Drive Software diagnostics tool reports that every test passed including Signal Test which gives an Excellent quality rating What it has failed is the Ping Test I would appreciate any help you can give because I am really out of my element here This laptop is for my son who will be entering college this fall and so I need it to be able to access wirelessly By the way it does connect via ethernet cable nbsp

A:Brand new laptop: Wireless worked at the start, now it doesn't

run IPCONFIG /ALL

if it shows the current IP address as 169.x.x.x then the issue is not finding
(or being blocked from sending/receiving ) the DHCP service in the router.

ALSO, if you see an IP address like 0db8:85a3:0000:0000:8a2e:0370:7334
then you have IPv6 enabled on the laptop;
1) google for disable ipv6
2) apply the solution for your {XP,Vista,Win/7} laptop

reboot and reconnect
 

http://www.techspot.com/community/topics/brand-new-laptop-wireless-worked-at-the-start-now-it-doesnt.169520/
Relevancy 27.09%

Hello, I purchased my Gateway NV55S02u laptop about 8 months ago and I have been busy and never really tried to resolve this problem. One out of three of my USB drive functions normally. Is it possible to scan my laptop and post a log with hijackthis or something? I suspect that it might be a hardware problem but I don't want to jump the gun.
 

A:USB driver not working Gateway NV55S02u

Hmm; sounds more like a bad/corrupt USB driver.

a) get to the Device Manager
b) expand [+] Universal Serial Bus controllers

look for yellow or red markers, particularly on the USB Enhanced Host Controller(s)
 

http://www.techspot.com/community/topics/usb-driver-not-working-gateway-nv55s02u.185425/
Relevancy 21.93%

I've just installed Corsair H60 liquid cooling and when I tried booting my computer up, after 5 seconds or so, everything stops. It happens every time I tried to boot the computer up.
My monitor was black and nothing appeared.
For 2 seconds before the entire system stops, the fan gets very noisy. And for the entire time the computer was booting up, my gpu's fan was even noisier than when I was playing my games.
I cannot get to BIOS or anything.
Why is this happening?

Cooling system: Cosair H60
Cpu: Intel I5 760
GPU: ATI 5770
Mobo: Gigabyte Ga-H55M-UD2H
PSU: 600W Max - 700W
 

A:PC doesn't work after installing Corsair H60 liquid cooling

You may have a short someplace between the motherboard and the case, or you may have bent the motherboard while installing the CPU cooler. I'd take the cooler out and replace it with the stock cooler and try again to see it the board still works. If it does I'd try the H60 again, but I'd make sure the motherboard wasn't under any extra stress from it.
 

http://www.techspot.com/community/topics/pc-doesnt-work-after-installing-corsair-h60-liquid-cooling.178522/
Relevancy 18.06%

my acer aspire 5520-5908 wont start up. when I press the power button on, it attempts switching on the fan and the fan goes off again with the screen not starting too.and all it does after is the power button light and signals blinking intermittently. I ve removed the battery, plug it directly so forth on and on but nothing seems to work. just blinking of lights.
 

A:My Acer Aspire 5520 won't start

The motherboard has probably failed
 

http://www.techspot.com/community/topics/my-acer-aspire-5520-wont-start.184476/
Relevancy 27.52%

wire diagram(pin-out's) for 4 pin connector (ref. designator=ch.1),on the inverter lighting bar board
 

A:Gateway 400SD4 inverter (4 pin)

Did you have any luck with this... Were the connectors burned?
 

http://www.techspot.com/community/topics/gateway-400sd4-inverter-4-pin.183978/
Relevancy 18.06%

I have no sound on my PC . I used to have before but I don't have now . Any ideas :S HELP

I ran msinfo32 and found this error :
Realtek Ac '97 Audio Pci/Ven_878 etc... This Device cannot Start
 

A:Realtek cannot start error 10

What are your PC's specs? A desktop or laptop?
 

http://www.techspot.com/community/topics/realtek-cannot-start-error-10.184217/
Relevancy 22.36%

I hooked up a USB drive to my DVR to epxand my recording time. The DVR reformated the USB hard drive. It turns out this drive is not compatable with the DVR. I would like to use the drive, as it is brand new, so I am trying to hook it up to my XP system. the drive shows up in the Device Manager as disk 4, but it does not show up in Disk Management. I also ran the "diskpart" utility. It does not show up in the "list disk", but I can "select disk 4". But when I do select it, I can't do anything to it. Any suggestions on how I can reformat this disk to use on an XP system?
 

A:USB drive doesn't show up on my XP system

Maybe the manufacturers manual will would be helpful. Can you provide me with the make an model?
 

http://www.techspot.com/community/topics/usb-drive-doesnt-show-up-on-my-xp-system.183676/
Relevancy 18.06%

I dont know whats wrong these are my specs:

Gigabyte Z77
Asus Xonar 5.1
Seasonic Platinum 860 watt power supply
Corsair Vengeance 16Gb 4 x 4Gb
Intel I5 3570k ivy bridge 3.4Ghz (3.8Ghz with turbo boost)
EVGA GTX 670 FTW 2Gb vram
Seagate Barracuda 500Gb Hdd
Lite-on Bd Drive
Antec 1200

At first I forgot to plug in the 12v cpu power, but I fixed that. This morning I noticed I put the power buttons cable into the wrong spot because I was following the cases color coding instead of the motherboards. But now I have no idea whats wrong. I have one idea, the screws I used to screw the motherboard in are really long and they stick out of the motherboard. Could that be the problem? Can someone help me I REALLY want to use this pc. I have been waiting for 5 years.
 

A:Just built a new PC for the first time and it will not start up

Please tell us what the problem is. What is the computer doing or not doing?
 

http://www.techspot.com/community/topics/just-built-a-new-pc-for-the-first-time-and-it-will-not-start-up.183108/
Relevancy 27.09%

I have a Gateway laptop model number 400VTX. Goodness, I must have gotten it early 2000's some time while I was in college. It worked fine up until last year. I was watching a movie on it that I was streaming from the internet. In the middle of the movie the screen went black. I have tried restarting it. When it starts it sounds like it is searching the cd drive for a disk. The lights on the bottom half/keyboard come on. The screen stays black. I am not sure if I need to take it in or if I can fix it myself. Any help you can offer?

Thanks.
 

A:Gateway laptop black screen

Can you try connecting an external monitor and see if you get video? If you do, the LCD display is the problem (inverter, backlight, LCD panel or cables). If you still get no video, the motherboard may be the cause
 

http://www.techspot.com/community/topics/gateway-laptop-black-screen.182309/
Relevancy 19.78%

Toshiba Satellite A25-S2792 w/ XP & P4 has greenpower chord is lit and yellow battery light is flashing when power chord is plugged in. After I press the power button, the power chord light changes to yellow, begins flashing and the battery light goes out. Removing the battery gives the same results. Pressing and holding power button down for 20 seconds w/ battery out yields same result as well. Suggestions?
 

A:A25-S2792 doesn't power up yellow light flashes after pressing power button

The motherboard is bad. Have you tried reseating the memory?
 

http://www.techspot.com/community/topics/a25-s2792-doesnt-power-up-yellow-light-flashes-after-pressing-power-button.158750/
Relevancy 19.35%

Dear Techspot Forums I am having some serious problems with my computer that I m hoping you can assist me with My computer is currently connected to my wireless Linksys device and everything is working properly My laptop that I m typing connected doesn't connect Computer but Internet Internet is to this forum on now is working great and always connects when I turn it on My computer however does not Computer is connected to Internet but Internet doesn't connect connect The computer shows that it is connected to my Linksys device but upon clicking on the internet button it says quot webpage can not be displayed quot The bottom right hand corner of my screen shows quot limited connectivity quot with a small yellow triangle This icon has shown in the past but I ve still been able to connect with it I m not sure what to do I ve done everything from repairing running full system Norton scans to downloading a winsock repairer from a flashdrive and trying that on the computer When I run the winsock and click quot fix quot it says quot registry import information not found quot Because I cannot connect norton security is out of date and I cannot conduct buisness on it Any information would be most helpful nbsp

A:Computer is connected to Internet but Internet doesn't connect

Remove Norton completely if you can. Download a program like Malwarebytes and a temp file cleaner like this:
http://www.geekstogo.com/forum/files/file/187-tfc-temp-file-cleaner-by-oldtimer/

Run these programs, restart when you are told and try connecting to the Internet once more. I suggest that you try Microsoft Security Essentials before you revert to Norton
 

http://www.techspot.com/community/topics/computer-is-connected-to-internet-but-internet-doesnt-connect.181786/
Relevancy 18.49%

My Laptop wont start. I have a gateway laptop. Windows 7. It wont boot it keeps going to the blackscreen and it says disk error occurred Pre control alt delete to restart...I did and it says the same thing it just keeps going to the black screen. I cant go to safe mode or anything. What do I do.
 

A:Computer won't start

Sounds like windows crashed or your hardrive did. Do you have a restore disk. If so I would give that a try. If that don't work. It is more or less your hardrive.
 

http://www.techspot.com/community/topics/computer-wont-start.181816/
Relevancy 22.36%

So I found out today that no, you cannot actually get port forwarding to work with the shitty no-name DSL-router combo that AT&T supplies.
I need a recommendation for DSL modem (or modem / router comb as they seem to be popular) that doesn't suck in the way that it will let me essentially run a web server from the connection without incident.
That is, I need to be able to forward ports through the firewall. (The one currently in use here well, doesn't let me do that... nor does it let you turn the firewall off.)
 

A:Recommendations for a DSL modem that doesn't suck

Really any DSL/router combo will be better than what you have. Linksys, Netgear, and DLink all make DSL modem/router combos. However, keep in mind AT&Fee may not support a 3rd party DSL modem. You maybe stuck with that box to have their service. If that is the case, I'd look into a different ISP. Hope this helps, take care!
 

http://www.techspot.com/community/topics/recommendations-for-a-dsl-modem-that-doesnt-suck.181508/
Relevancy 26.66%

hi this is my first post please excuse card Gateway Updating FX4710 video in me for any lack of knowledge and knowing of site procedures with that said thank you in advance so I have a Gateway FX -UB A pc specs include watt power supply g memory intel core quad q processors windows vista bit I was using a geforce gt untill it stopped working and was Updating video card in Gateway FX4710 causing my pc to restart so I took it out switched video to the onboard mother slot and have had no problems with pc I went to bestbuy today Updating video card in Gateway FX4710 and bought a XFX Radeon HD and installed it into my pc AND Updating video card in Gateway FX4710 IM GETTING BLACK SCREEN I meet all the requirements for the video card with my pc the fan is spinning so I guess its getting power I thought it was weird though bc my geforce gt had to be powered by my power supply via x pin plug in this card does not have a plug in for power maybe thats my problem I dont know the fan is spinning please help must play diablo nbsp

A:Updating video card in Gateway FX4710

Try uninstalling the old nVidia graphics driver before installing the Radeon.
 

http://www.techspot.com/community/topics/updating-video-card-in-gateway-fx4710.180868/
Relevancy 18.49%

Ok so I'm new to the area of building a pc and don't really know where to start. I have the motherboard and cpu figures out I just don't know where to go from there.
 

A:New build, don't know where to start

Check out this guide
Techspot PC Buying Guide


What is your Budget?
What purpose will this new PC serve?
What components do you already have?
Where do you live?
Are you open to using online merchants? IE newegg, amazon.
The more information you give us. The better the people of Techspot will be able to assist you.
 

http://www.techspot.com/community/topics/new-build-dont-know-where-to-start.180563/
Relevancy 22.36%

This is an issue that I ve been having with my computer since I built it summers ago Basically the monitor won t receive any signal when my room is warm particularly during the summer months This come doesn't too room warm on Monitor is when also means if I ve been running my computer for a while and then shut it off or even just restart Monitor doesn't come on when room is too warm it it won t turn on again initially This only happens when I turn my computer on Once it s on I don t have any issues The only way I really know to fix this problem is to leave it off for a while and blast the air conditioning till I can restart it without any problems Otherwise I just have to leave my computer on all the time My motherboard is an EVGA P series and my graphics card is an MSI N GTX Way back when this issue first happened I tried using another graphics card and still had the same result so I would assume the issue is not with the graphics card Has anyone encountered this problem before or know what the underlying problem could be Any help would be great and I can try to provide more information if needed nbsp

A:Monitor doesn't come on when room is too warm

Does the back of your monitor feel very hot, when you are having issues?

I know they may get warm but they shouldn't get so hot you can't hold your hand on them.
 

http://www.techspot.com/community/topics/monitor-doesnt-come-on-when-room-is-too-warm.180471/
Relevancy 21.5%

This was really perplexing. I am trying to install a Galaxy GT520 on my Inspiron 546. So i take of the slot i need in the back-plate and fit the card into the slot. But...the card didn't fit into the back-plate. It's like a millimeter off.... There is a little slot that the back-plate slots go into but it doesn't fit into the slot. It's almost like it needs to be a millimeter longer. Thanks to anyone who helps.

 

A:Graphics card doesn't fit backplate but fits in PCI Express slot

check this out http://support.dell.com/support/edocs/systems/insp535mt/en/sm/cards.htm#wp1193399

GT520 is a PCI and should fit the 546, line it up as ^^^^ shows and press hard, dont ram it in there, but apply a bit of force.
 

http://www.techspot.com/community/topics/graphics-card-doesnt-fit-backplate-but-fits-in-pci-express-slot.180377/
Relevancy 27.52%

Hello. I have been trying to find a teardown guide or video or basically anything pertaining to the Gateway M-6864FX, i know its a weird side model of the FX series but Im trying to replace the motherboard in it and instead of crowbaring the thing apart id like some kind of guide so i can have a little bit more finess with it. So if anyone can link me to blueprints or a tear down or disassembly instructions that would be greatly appreciated.
 

A:Looking for a teardown of Gateway M-6864FX

Gateway got back to me with basically a well it sucks to be you reply. They said they no longer have warrenty for it *which i know* and that because its a "legacy" model, they dont carry a teardown or anything for it. So if anyone has any info please let me know.
 

http://www.techspot.com/community/topics/looking-for-a-teardown-of-gateway-m-6864fx.176657/
Relevancy 22.36%

I am fixing a PC for a friend; their power supply went bad, so i switched it but now the PC will NOT turn on using the front PC button but rather it turns on when i plug in the cable in the Power Supply.

& Furthermore, it shows nothing on the monitor when it turns on...

The Power Supply Fan is working, CD Drive open normally & i can hear the Hard drive moving...

Can you guys give me a bit of advance on what i should do next please?
 

A:Power button doesn't work with new PSU

Are you sure you plugged all the connectors correctly? The PC not switching on from the front button would seem to indicate the power switch is not plugged into the motherboard.
 

http://www.techspot.com/community/topics/power-button-doesnt-work-with-new-psu.179854/