Windows Support Forum

Webcam Software and Live! Streaming Server

Q: Webcam Software and Live! Streaming Server

Hi, guy
I have problem about webcam software,Now I looking for the webcam software for record and sent the movie to Darwin Streaming Server and then the server will broadcast. But I can't find the webcam software that can connect with the Darwin Server ( I got WireCast but it's so expensive because I have almost 20 people to use the application ) Plz help me.
Best Regards,

https://forums.techguy.org/threads/webcam-software-and-live-streaming-server.772775/
Relevancy 100%
Preferred Solution: Webcam Software and Live! Streaming Server

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 21.5%

I have been working on setting up a Minecraft server for a couple of days now and I cannot find a way to get my friends outside of my network to connect connect my to can't My server friends Minecraft I know I gave them the right IP address and I have tried several solutions with no luck I can however connect to the server from other computers connected to the same router but I think that only works when I have it set My friends can't connect to my Minecraft server to quot cracked quot mode I tried disabling my firewall on both my host computer and my router using a different computer as the server host and changing the port All solutions I have tried gave the same message to my friends quot Cannot reach server quot My friends can't connect to my Minecraft server when I was able to connect just fine Here is some possibly useful information Host computer It s not the best -OS Windows XP Professional SP -Processor Intel Pentium GHz uni-core -RAM MB -IP Address Minecraft Server -Version jar Router -Type Wired Wireless -Brand Cisco -Model Linksys E -IP Address -Router Information Firmware Version build Apr Firmware Verification e c b ec c b c ceb Current Time Fri Jan Internet MAC Address FC CB -Internet Connection Connection Type Automatic Configuration - DHCP Internet IP Address Subnet Mask Default Gateway DNS DNS DNS MTU DHCP Lease Time Hour If there is My friends can't connect to my Minecraft server any other information you need please tell me nbsp

A:My friends can't connect to my Minecraft server

You need to forward some ports (router settings) and then open incoming port in your firewall (OS settings). Start here.
 

http://www.techspot.com/community/topics/my-friends-cant-connect-to-my-minecraft-server.175806/
Relevancy 26.23%

Okay so for the past several hours I ve gone through the throes of attempting to get my Asus laptop s built-in webcam to work I took a on laptop cannot Windows 7 webcam the built-in Asus detect my look at Device Manager and had found two items titled quot Base System Device quot or something to that effect I don t quite remember and I thought that one of them would be the webcam Well after searching for the mystery items Hardware ID on Google I had Windows 7 cannot detect the built-in webcam on my Asus laptop discovered that these devices were in fact not the webcam Then I had used the quot Add a Device quot option under Devices and Printers in the Control Panel to try and find the webcam After letting it churn for ten minutes it appeared that Windows wasn t even searching anymore and I was staring at a blank window for nothing The only clue I have about the situation is after running DriverEasy it listed quot USB M UVC WebCam quot as a needed update but it also said quot unplugged quot beside the selection and was highlighted in red After attempting to download and install the driver the program had given me some Packard-Bell webcam driver that is most definitely not correct Packard-Bell still exists This had all started however when I made a clean install of Windows I had just spent the last two days scouring the web digging up my lost drivers and programs that had come with the laptop Everything s been successful save for this one element My webcam is lost somewhere in my laptop I just can t get to it If anyone has any ideas as to what s happened and yes I know it s a possibility the wiring is shot and how to fix the issue please give me any tips that you can I ve done everything possible in my power including trying to find the drivers but you obviously can t install drivers for devices that Windows doesn t even detect Oh before I forget my laptop model is Asus x v B if that helps in any way nbsp

A:Windows 7 cannot detect the built-in webcam on my Asus laptop

Was this laptop purchased with Windows 7 as the OS that was installed on it ? Or did it come with Windows Vista and you just wiped it out and put Windows 7 on yourself??
 

http://www.techspot.com/community/topics/windows-7-cannot-detect-the-built-in-webcam-on-my-asus-laptop.155636/
Relevancy 27.52%

I have a samsung np 350 laptop which has pre installed windows 8.The web cam was working fine till I reset the windows many of the installed softwares got deleted and from then on my web cam goes undetected for every possible software.Please help me with your valuable suggestions,,,Thank you
 

A:Webcam not detected

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Also download and run USBDeview
> Click Edit->Select All
> File->Save Selected Items
> Click the Save As Type pulldown and change it to Tab Delimited Text
> Save the .txt file to your Desktop and attach to your next post
 

http://www.techspot.com/community/topics/webcam-not-detected.192849/
Relevancy 26.66%

Greetings!

I have an MSI GS70 laptop here , its about 1 month old and the webcam has stopped working,

It has worked earlier, Nothing happens when I try to start it and when I try to find it in the device manager it is not there.

Any idea what I can try?

Thanks!
 

A:MSI GS70 Gaming laptop Webcam not working

Ok I have an MSI GT70, did you try activating it via the toolbar at the top of the screen that comes on MSI laptops. It looks like a tiny paperclip at the top of the screen in the center, there should be once you open that toolbar up an option to activate the webcam.
 

http://www.techspot.com/community/topics/msi-gs70-gaming-laptop-webcam-not-working.197211/
Relevancy 21.5%

A few months ago I made a minecraft server and it worked perfectly. Today I tried to join with external ip and it didnt work but I could before.Is it something important? Is my server working? Is it the router's problem?
I would appreciate any help as soon as possible

Btw my ip is 46.12.115.127
 

A:Minecraft Server Problem

@ 13:50 PDT I can not ping that IP from Southern Calif.
 

http://www.techspot.com/community/topics/minecraft-server-problem.212628/
Relevancy 29.24%

I have a Dell Optiplex 330 which has a 2.0 dual processor with 4gb of ddr2 ram. I have windows xp installed and I have a video card that has 1024 mb of ram. I am unsure of the brand of video card or further specs. I bought it off of ebay some time ago.

My problem is that when I try to play streaming video it wants to freeze a lot. I have already given more space for the virtual memory on my computer: I think 4 to 8 gb and I have set my hardware acceleration way down but these changes haven't helped.

I can download and play movies fine, I only seem to have problems when playing streaming video like from hulu.com or letmewatchthis.com which directs you to sites like: putlocker, deditv, sockshare, loomba, etc. I have used other computers and they don't seem to have as much problems with this so I hope that somebody knows what I need to do to solve this problem. Thanks in advance for any help.
 

A:Freezing problems with streaming video

When you say freezing, do you mean just the video freezes, or the whole system? If its just the video, it could have something to do with your internet connection. Is the computer on wired internet or wireless?
 

http://www.techspot.com/community/topics/freezing-problems-with-streaming-video.164671/
Relevancy 21.5%

Hello everyone
so I have gameserer hosting website
and all my server I rent them from some website
now I have 2 server in my home but I will sell it
and I want to buy new one
but I don't know what is the beast part I have to get it ?
should I get E5 or E3 ? and 1cpu or 2cpu ?
I will host on it some game and its MineCraft and some other game from valve
the other game from valve is
Counter 1.6,scours,go
Garry's mod
Team Fortress 2

so what is the largest server can I have so I can host as many as I can on it ? and about the price I don't care to much on it so if you can just give me something good
I think I will host at less 20-30 servers on it

so what can you advise me ?
 

A:Bulid servers for Game-Server

Well I would do some researching on what people use for their servers because I don't have much knowledge personally on game servers. What I can provide though is insight on how the parts differ.

A Xeon E5 is based on a completely server-oriented architecture while the E3 is supposedly just a more high-quality binned i7.

I would read up more on server hosting requirements/what is best more in depth than I did below, but the consensus seems to be that the E3 or E5 is fine with lots of RAM. Keep in mind, the E5 can have twice as much RAM as the E3. Another thing to keep in mind is whether the game is multi-threaded or single threaded and the tick-rate of the server. If you have more players and the game is multi-threaded (Minecraft isn't for example if I am not mistaken), then go for the E5 just to be safe.

I was researching online about the CS:GO server requirements and came across this forum post and they linked to this dedicated server wiki page. Since Garry's Mod, CS:GO, and TF2 run on the same engine, the requirements should technically be the same. Minecraft isn't really too demanding either so you should be fine basing the server on Source games. Here are the requirements for a Minecraft server. It seems to me like the servers don't need much horsepower.

Here is another useful forum thread that will provide the best insight.
 

http://www.techspot.com/community/topics/bulid-servers-for-game-server.208926/
Relevancy 21.5%

I am deeply sorry to post this silly question but here is my problem:
Recently I made my mc server, I port-forwarded the 25565 port and my friends joined and the server worked perfectly. Then all of a sudden, they disconnected all at once. After some investigation I realized that my external ip adress had changed. I kept giving my friends the new ip adresses every time they changed but that seemed like not the best solution. Also I checked and my ips are static. I have some screenshots containing the problems and info here.






I used PortForward Network Utilities to make the ips static and every one is static and the external ip keeps changing. Is there a way to stop the external ip from changing or no?
P.s. DHCP is not enabled on LAN.
Sry for my derpy tech language if you don't understand anything just ask
 

A:My friends get disconnected to my Minecraft server

Okay, that is a legit issue. Your external IP address is provided by your Internet Service Provider. It seems as if they either have it set to switch IP addresses constantly, or they're doing that just to you to prevent you using a server unless you pay more money for a static IP. My local provider refreshes my IP very rarely, but I have had it happen in the past and it did confuse me for a bit. Call up your ISP about the problem, and see if you can figure out a way to stop it. I wouldn't imagine it adding too much more to your internet bill, but I honestly don't know.
 

http://www.techspot.com/community/topics/my-friends-get-disconnected-to-my-minecraft-server.208559/
Relevancy 27.09%

Good Day My laptop is a HP - notebook I run a LinuxMint cinnamon Rebecca bit O S I have quot cheese quot amp VLC available for webcam operation However I cannot get either to correctly active operate the integrated webcam I will try to provide as much detail as I can then I have a few questions and demands Every once-in-a-while the isn't detected/operating Webcam webcam will operate through quot cheese quot albeit for only seconds to about - minutes Then it shuts down and error reports quot No Device Found quot or quot Error Playing Video quot In VLC it s error reports quot VLC is unable to open the MRL v l Check the log for details quot I ve even tried guvcview and it s error report is quot check for correct drivers quot Webcam isn't detected/operating I ve Webcam isn't detected/operating been to on just about every Linux Ubuntu forum I can find I ve been to on HP Linux forum Have multiple postings at those forums dealing with Webcam isn't detected/operating this issue and as yet all efforts have been futile I getting the impression I have driver quot issues but I cannot ascertain what drivers I need from Linux nor why they are not in the kernel We know the webcam is operable works so we can rule out hardware I m completely baffled as to how it will operate so intermittently How I get a different error report from each software app I e VLC cheese guvcview PLEASE don t tell me to go to Linux Ubuntu Please don t tell me to go to HP I ve have all but exhausted those avenues Forgive me if this post is not in the proper forum Tell me and I ll post to the correct forum and delete this here Should you need any other info please request specifically what you want need and I ll be glad to forward post it Rick nbsp

A:Webcam isn't detected/operating

Not to say that this is the Wrong place to put it, it is definitely a Laptop/Mobile computing issue, but not everyone knows Linux systems, I myself am not a Linux user and don't fully understand how to use it, so I will suggest posting the exact same stuff (Just copy the info and make a new thread) and post here:
http://www.techspot.com/community/forums/the-alternative-os.16/

For the Title, just add "Linux" at the end or something so that users can identify quickly and not have to read through the full post Best of luck with your issue, wish I could help more.
 

http://www.techspot.com/community/topics/webcam-isnt-detected-operating.208223/
Relevancy 21.5%

I'm curious if there is any open source proxy-server-like software out there that I can use to accelerate web surfing. Amazon's Silk browser/platform for the Kindle, and Opera Mini do this for mobile clients; I'm mostly thinking about setting this up for laptop / desktop clients, so I'm not so interested in having a server render a webpage.

My setup is this: I have a few clients (my computers), on a high-latency internet connection. I have access to a relatively private server, which has an extremely fast internet connection.

Would setting up a proxy server on the server [machine] actually help connection speeds? I imagine things like Silk and Opera Mini compress data (don't send the same thing twice), and reduce the # of HTTP requests (for images, etc.). Would something like squid actually have the same effect? It seems to be targeted at the slow-website-server scenario.
 

http://www.techspot.com/community/topics/can-one-set-up-a-proxy-server-to-accelerate-web-browsing.207907/
Relevancy 21.5%

I am trying to set up my Windows Xp computer as a VPN server I have taken the initial steps I get to the Accept Xp setup VPN hanging server Windows incoming connections screen and click okay The computer hangs for about a minute or so and then comes up with the following message Incoming connections depend on Routing and Remote access Windows Xp VPN server setup hanging service which was unable to start For more information check the system event log I presumed I had to go to control panel performance and maintenance Administrative Tools Event viewer I have already made sure that Routing and Remote access are enabled as well as Telephony I could not find Netbios in the services list and don t know where to Windows Xp VPN server setup hanging look for it Also when I try to start Routing and Remote access service manually I get the following message Windows could not start Routing and Remote access on local computer For more information review the System Event Log If this is a non-Microsoft service contact the service vendor and refer to the service specific error code- Can some one give me a step by step walk through of how to resolve this issue so I can connect to that computer from work over the internet nbsp

http://www.techspot.com/community/topics/windows-xp-vpn-server-setup-hanging.207658/
Relevancy 21.5%

Every time I shut down my Inspiron 15 using windows 8.1 when I boot back up I get an error message proxy server not responding when I try to go online. I then have to go to the connections tab of internet options and click lan settings and uncheck use proxy server for your lan. Is there something I can do to get around having to do this every time I boot up?
 

A:Proxy server not responding

Never mind, I researched microsoft's website and reset ie settings to solve the problem,
 

http://www.techspot.com/community/topics/proxy-server-not-responding.207513/
Relevancy 21.07%

Hi,

I am playing around with Server 2012. If I want to have a laptop configured for "at office use" with option to go on site, what would be the best way to do that in order to retain access to shared locations on server that is "at office"?

Should I create a standard windows account unrelated to my domain controller, and have them VPN regardless if they are in office or on site? Or is there a way to have a laptop configured for domain use, where it will still be functional (local computer use) on site outside of the office, even without internet connection (I know you can's VPN without it).

Thanks
 

A:Best way to set up local and remote user with Server 2012

Well this is kind of interesting. You can in fact use a domain laptop away from the local network as long as you have logged into int once on the domain so it can cache your password for future log ins. Now comes to the more difficult part of your question's. Accessing files remotely while not online, you can set up what is called offline files. Offline files will give you acess to your files away from domain network. So if you choose to do offline files any changes made to the file while away from the domain controller where you shares are set up will have to be synced once back on the domain network. So if you make changes to lets say docA while off domain network, once you get back to domain network you will have to sync offline files to the server to update any changes you have made. This set up would not require offsite network but can bring problems when syncing once you reconnect on domain. But now lets say you have the same shares and now you have multiple individials with the same access to the shares. Say you make changes to docA and the other person makes changes to docA while offiste. Once you both reconnect and sync to server you could have issues with data such as duplicate information or doc merging. VPN would be the best option for sure....
 

http://www.techspot.com/community/topics/best-way-to-set-up-local-and-remote-user-with-server-2012.206403/
Relevancy 21.5%

Hi,

Wile I am in the posting mood. Just thought I would ask the question. Is it possible for me to host/and play a call of duty server from my laptop or desktop?
When I was younger I played games like the delta force collection of games. And could just go into the game, click host server. And then gradually people would join my game as they seen it on the lobby.
Is this possible with any of the call of duty games for PC? I assume it needs some network configuration
If anyone could help me do it I would be really gratefull. I have my Nat port configured to open. But I would like to host a server and have it free for anyone to join

Thanks
C
 

A:Hosting call of duty 2 server

Has anyone any advice on this? :/
 

http://www.techspot.com/community/topics/hosting-call-of-duty-2-server.206731/
Relevancy 21.07%

This mobo got me wondering, packs alot of specs :
18 SATA ports (10 are SATA3 ports from the Intel X99 Express chipset, 8 are SAS ports stemming from the LSI SAS 3008 controller) and five PCI-E 3.0 x 16slots for 4-way graphics cards! 600$ motherboard for some serious business, I think this would be ideal for a video editing workstation..
 

A:Ultimate server / Workstation mobo? Asrock X99 Extreme 11

I'm probably one of the few that uses the ASRock Z87 Extreme11
There is always a market for their Extreme11 series boards. I use mine for a bounch of stuff gaming, media server, video editing with all 22 SATA ports even 2way SLI. Might be a bit over kill 4 way SLI but who knows...
 

http://www.techspot.com/community/topics/ultimate-server-workstation-mobo-asrock-x99-extreme-11.206694/
Relevancy 20.64%

Hi,

I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )

I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.

My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . : 172.22.155.137
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 172.22.155.138
And when I try to do nslookup:
C:\Windows\system32>nslookup
Default Server: google-public-dns-a.google.com
Address: 8.8.8.8

The default server shouldn't be that thing. please help. Nor the address

Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
 

http://www.techspot.com/community/topics/your-computer-seems-to-be-correctly-configured-but-the-device-or-resource-dns-server-not-respondin.206332/
Relevancy 23.65%

Have to choose a new work phone but I have a hard time deciding ... Friend's Galaxy S5 and 8200 mah battery seems awesome so Apple and Microsoft are not up to my mind. Since the new phone is supposed to live with me for like 2 years, so..what's the average life span of Samsung phone?
Anyone have opinions? Samsung Galaxy Note 4 or Galaxy S5?
 

A:Need a phone to live with me for like 2 years

A smartphone can last for numerous years as long as you don't abuse it. It isn't a matter of lifespan since most phone hardware gets dated after 2-4 years and you are going to want an upgrade. It will still work even after the cell service is ended.
 

http://www.techspot.com/community/topics/need-a-phone-to-live-with-me-for-like-2-years.205036/
Relevancy 27.52%

Okay so this problem has been going on for at least Broken? Webcam half a year now and I swear I ve tried everything short of reverting my computer back to factory settings which I really don t want to do because I don t have anywhere to store my files I run Windows bit on a Toshiba Satelite C laptop My stock webcam stopped working out of the blue roughly six months ago and when I checked it in the device manager my webcam is Webcam Broken? displayed with a yellow alert triangle When I go into properties this is the message that I see quot Windows cannot verify the digital signature for the drivers required for this device A Webcam Broken? recent hardware or software change might have installed a file that is signed incorrectly or damaged or that might be malicious software from an unknown source Code quot I already uninstalled and reinstalled the drivers for it numerous times and asked Windows to find an update fo it numerous times but no luck After a while I went out and bought a new usb webcam but that failed as well The item said that it would automatically download the drivers when plugged in but it didn t On top of that that webcam displays with a yellow triangle too I seriously have no idea what to do at this point I hate my computer but I can t afford to get a new one Help nbsp

A:Webcam Broken?

Back up your files to a DVD or flash drive and do a factory restore
 

http://www.techspot.com/community/topics/webcam-broken.204810/
Relevancy 21.93%

I m looking to build a tower server from scratch that ll support - incoming connections to a game that will be hosted on this server Budget - I m planning on running Linux on this PC it ll run graphics are unnecessary as this PC will serve only as a server Server Building a PC also the saves for the players don t take a lot of memory so I won t be needing a TB harddrive I ll be planning to upgrade the system in the future to support more users List of items I m looking at Intel Core i - k Crucial GB x D - DIMM Gigabyte GA-Z -HD ATX LGA Samsung E GB EVO SATA quot IPSG LG X DVDRW SATA OEM IPSG Carbide Series R Case EVGA NEX G W GOLD PS Subtotal UEZ Sales Tax Total This is a price quote and recommendation I Building a Server PC got from a sales associate from MicroCenter NJ What I m wondering is would these components be enough to support a hosting server of - people with minimum lag If the playerbase of the game increases would I be able to upgrade the system to support more players Would it be better if I bought a Server Motherboard that ll support more processor for future purposes Are there anything cheaper that I could use to start off with and upgrade to in the future nbsp

A:Building a Server PC

Servers don't need heavy hitting processors. The primary resources are memory, networking and file I/O

The 120GB drive is minimally acceptable, although if I were building a server, I would have at least two drives,
one for the server and the other for the data being served. Performance would be better and either drive could be
replaced/upgraded without disrupting the other - - also improves your backup media consumption.

Let's talk networking. Is this a private server for just LAN connected users or do you intend to have Internet connected players?

* hosting server of 20-30 people * in a lan based server says you will need a good switch connected to the router for wired users OR an access point for wireless

* I suspect you are intending a public server with Internet users {upgrade the system to support more players}.
You should read your ISP End-User-License-Agreement; unless you purchase a private IP address & Domain, the ISP typically forbids your hosting anything. They will cause you and your users all kinds of issues, such as limiting bandwidth and randomizing your public IP address.
 

http://www.techspot.com/community/topics/building-a-server-pc.203794/
Relevancy 20.21%

Just to be and Nvidia AMD: Features vs. Software clear I want NO ARGUMENTS This is a reasonable discussion The conflict between the two major GPU developers is as old as I remember and while the obvious answer in which is better depends on how much you want to spend and various subtleties in manufacturing Nvidia vs. AMD: Features and Software and releases the two generally leapfrog each other with every release I want to discuss what in terms of software support features and game coding each has over the other Lets start with what almost everybody knows Nvidia release drivers every time there s an actual update not the regular monthly update that AMD tend to do and while this probably results in better Nvidia vs. AMD: Features and Software updates it can mean a long time between problems getting fixed waiting for small fixes because a Nvidia vs. AMD: Features and Software big bug takes a long time to patch Nvidia have also developed the G-Sync for monitors which I barely know anything about - kind of the point of this thread a can anyone shed light on how this performs I ll update this top post as others provide feedback AMD s Mantle technology is becoming more and more widespread in new releases especially as AMD make more deals with game developers While my AMD GPU is too old to benefit from the Mantle updates it is doing well in trying to convince me to get AMD as my next card as well Again can anyone provide feedback on how the newer AMD cards perform on the Mantle-enabled games Cheers guys nbsp

A:Nvidia vs. AMD: Features and Software

ETF Soldier said:





Just to be clear, I want NO ARGUMENTS. This is a reasonable discussion.

The conflict between the two major GPU developers is as old as I remember, and while the obvious answer in which is better depends on how much you want to spend and various subtleties in manufacturing and releases, the two generally leapfrog each other with every release, I want to discuss what, in terms of software support, features and game coding, each has over the other.

Lets start with what almost everybody knows:

Nvidia release drivers every time there's an actual update, not the regular monthly update that AMD tend to do, and while this probably results in better updates, it can mean a long time between problems getting fixed (waiting for small fixes because a big bug takes a long time to patch).
Nvidia have also developed the V-sync for monitors, which I barely know anything about - kind of the point of this thread, a can anyone shed light on how this performs? (I'll update this top post as others provide feedback)
AMD's Mantle technology is becoming more and more widespread in new releases, especially as AMD make more deals with game developers. While my AMD GPU is too old to benefit from the Mantle updates, it is doing well in trying to convince me to get AMD as my next card as well. Again, can anyone provide feedback on how the newer AMD cards perform on the Mantle-enabled games?
Cheers guys.Click to expand...

Firstly I think both companies release drivers at pretty regular intervals at this point, every major game release at least entitles a beta driver minimum.

Your speaking about G-Sync I believe. It works very well for what it is which makes the monitor and GPU communicate together to change the refresh of the monitor live to match the output FPS in order to keep the game seeming as smooth as possible with no lag, frame tears, etc. Its an excellent piece of technology but you pay a 250+ dollar premium for a monitor with it minimum. Right now DisplayPort 1.2a added this to the VESA standard so now it can be done on monitors without the specific G-SYNC module however AMD is the only one to support this in the future when they start appearing but its still going to require some work from the monitor companies. G-Sync is awesome for high resolution and high refresh setups where stability is a bit harder to achieve.

BF4 with Mantle and surround going (Ill have my Asus UHD monitor today to try) is able to maintain easy 60 FPS ultra and thief is the same way. Those are the only two mantle games I have tried as I have not gotten around to getting one other game that supports it.
 

http://www.techspot.com/community/topics/nvidia-vs-amd-features-and-software.203796/
Relevancy 27.09%

I want to record from a webcam, mounted on a vehicle.

I need to use 2 displays, 1 for the camera fullscreen 7? display (HeadsUp), and the other displaying the software controls.

Any suggestions for the hardware/software?

Mac OS preferred but can go with PC
 

http://www.techspot.com/community/topics/two-display-webcam-recording.203677/
Relevancy 21.5%

Right first things first to mix it up a bit, I've started a minecraft server on an LINUX based operating system, I've followed all the steps that have been required to start the minecraft server and so on, I've portforwarded everything (something else about it comes up later) And done everything it has said to do. I've run minecraft servers before so I do know how they work

HOWEVER, Because I still want to keep the portforwarding on my main computer so that I will be able to host other things from it, I changed the minecraft server to 25566 and since doing that no one has been able to connect to it. The only way I can connect to it is the internal address:25566 and nothing else. Other than that it does not work at all.

Yes I have put the correct IP in
Yes I am using the external IP to connect to it but it won't allow me to join with the external IP address even if I put :25566 after it.

Any suggestions?
 

A:Require help on a minecraft server

You said you've port forwarded it. Then you changed the listening port on server. Did you also change the port forward rule on router?
 

http://www.techspot.com/community/topics/require-help-on-a-minecraft-server.203254/
Relevancy 21.93%

I cannot get online whenever I try I get the following message in a software Update box. The server is unreachable. Retry the request. When I access network connections, the broadband connection symbol has a x over it, and there is this message. This connection is not available because there is a problem with your modem is network adapter. Can anyone offer any solution please
 

A:Server unreachable

Try to update the driver
 

http://www.techspot.com/community/topics/server-unreachable.201529/
Relevancy 21.5%

I know the parts are overkill for what I will be using it for to serve media to TV phones and pc s it will also back up my pc s weekly file server and questions Home server ftp sync to an offsite location I will be testing things like active directory and VMware because I use these are work but I cant really mess around with them to much there The server is will be running Windows Server R or R I haven t made up my mind yet I want to be able to leave the server on but have it go into a sleep mode until something is requesting data from the server over my lan or internet I know how to do this but I don t know if its good to do with RAID these are the parts I m using If you have any questions please ask me anything Fractal Design Define Mini http www newegg com Product Product aspx Item N E Western Digital Red NAS Hard Drive WD EFRX TB x in RAID http www newegg com Product Product aspx Item N E Rosewill TACHYON- W http www newegg com Product Product aspx Item N E Mushkin Enhanced Blackline GB x GB http www newegg com Product Product aspx Item N E ASUS GRYPHON Z LGA http www newegg com Product Product aspx Item N E Intel Core i - Haswell GHz http www Home server questions newegg com Product Product aspx Item N E Adaptec RAID T http www newegg com Product Product aspx Item N E SAMSUNG EVO GB http www newegg com Product Product aspx Item N E nbsp

A:Home server questions

Have you got a UPS? What's your question.

Also can you please tell me how you do the sleep mode? WOL when something requests access?
 

http://www.techspot.com/community/topics/home-server-questions.200648/
Relevancy 26.66%

Hi,

All of a sudden my build-in webcam is no longer recognised. I have upgraded my OS from windows 7, to windows 8, to windows 8.1, but that was a while ago and my webcam has worked in the mean time.

Has anyone had similar problems or does someone have a (possible) solution? All ideas are welcome, since I need my webcam for videoconferences.
 

A:Asus N53SV build-in webcam problem

It could be compatibility problem,,, try to install webcam for windows 8.1
 

http://www.techspot.com/community/topics/asus-n53sv-build-in-webcam-problem.201663/
Relevancy 27.52%

I have a Fujitsu Siemens Amilo S Series Si 2636 laptop with built-in webcam 1.3 MPixel and I am using Windows 7 Ultimate. I've been using it with no problems so far but when I just wanted to make a video call notice it's not working." Webcam not detected" and when I tried to look it up in search it wasn't found. What is the problem? What should I do? Please help me
 

A:Webcam not detected

I have the same problem ... and I cant use it ??? why
 

http://www.techspot.com/community/topics/webcam-not-detected.173759/
Relevancy 21.07%

We have a problem with the connection to our server. The server disconnects randomly from minutes to hours all day. I am at a remote location and connect via logmein to a local pc at the servers physical location to remotely control and connect to the server. A month or so ago the connection would drop every few minutes. The staff at that location replaced the switch and had the ISP tech check out the router. No problems were found. I think it is a problem with the server itself but don't know what it could be. Typically I can go through the login process and reconnect. I'm sorry I can't be more specific about the equipment since it is 40 miles away. Any suggestions on troubleshooting? Remotely?
Clearly I'm not a network guy.
Thanks for any help or direction
 

A:Network connection to server disconnects constantly

The usual suspects are:

(for DSL connections only) missing or faulty line filters
need to update the router/modem firmware at your end
packet reassembly overflow(a)
(a) very techie, but the solution is easy; see this description
 

http://www.techspot.com/community/topics/network-connection-to-server-disconnects-constantly.200706/
Relevancy 21.07%

Hello. I am a complete newbie to server administration. At my current job, I have been tasked with setting up a deployment server. The server is a Windows 2008 server and is not connected to the Internet. The server is a domain controller on its own domain (different from the main domain my job uses). How would I connect this server to the Internet without disrupting other users on the network? By disrupting, I mean connecting to my server instead of the main server for DNS and DHCP. The server has Active Directory Domain Services, DNS, DHCP, and WDS roles set-up.
 

http://www.techspot.com/community/topics/connect-server-to-the-internet-without-disrupting-other-computers-on-network.200167/
Relevancy 21.5%

I m working one replacing our file server at work The one we currently have was built around and is starting to show its age So I m thinking new server time The server will be for a copy shop that specializes in house plans and construction plans We store lots of large pdf and tiff files Also have a full service sign shop so lots of Illustrator and Photoshop files - may of the raster graphics are New server file FreeNas quite large ft x ft sign dpi takes up a lot of space New FreeNas file server The server will need to connect to - computers at any one time with upto printers amp copiers active on the network at any one time I already have a fairly decent switch with one port having gigabit Ethernet that the file server will be plugged into and there reset of the ports being megabit Ethernet ports of the files we work with are storage on the file server - form house plans to large commercial building plans to customer artwork and designs for both small format printing and large format They are loaded modified saved and printed while on the server I strongly discourage anyone storing files locally as there are no backups on the individual computers only on the file server Both local and through Crashplan Anyways onto the hardware I already have the process from another project that didn t pan out Intel Xeon E - V Ivy Bridge GHz Mobo SUPERMICRO MBD-X SCL-F-O Case Fractal Design Define R PSU Thermaltake Toughpower Grand TPG- M W ATX Ram Kingston GB x GB -Pin DDR SDRAM ECC Unbuffered DDR Server Memory Model KVR D E SK G HDD s Seagate NAS HDD ST VN TB x I plan to put the HDD into a Raid-Z which should give me about TB of space I have built several gaming computers and graphic design computers before but never a server I think I have a fairly good built here but would certainly welcome input from someone with more experience in this area than me nbsp

http://www.techspot.com/community/topics/new-freenas-file-server.200039/
Relevancy 26.66%

I am using windows 7 and my webcam is not working,whenever I tried to use to it says "webcam not detected ". even it is absent in device manager and I hope someone will help me to solve the problem.
 

A:Dell integrated webcam won't work

What is the exact brand and model # of your laptop?
 

http://www.techspot.com/community/topics/dell-integrated-webcam-wont-work.199619/
Relevancy 21.5%

Hello
guys please I need your help, my laptop keep saying
Unable to connect to the proxy server what can I do to fit it please
 

A:Unable to connect to the proxy server

You are getting this message because the laptop can't find a wireless network to connect to...
 

http://www.techspot.com/community/topics/unable-to-connect-to-the-proxy-server.199618/
Relevancy 23.65%

I have a 2TB My Book Live that I and my housemates use to store media. Initially I was the primary contributor to the drive, and at that time there were no issues. Eventually, someone else began adding files to the server. Since then, any folder that someone else has added files to cannot be accessed by me unless I am logged in as a guest. If I log in as an administrator the folders show up but are greyed out. This only happened with one user. I am running a Mac, and they were using Windows, but other Windows users have added files without causing this issue. I was wondering if anyone else has experienced this, and if anyone knows of a workaround other than always logging out as administrator when I want to access those folders.

Thanks for any help
 

A:WD My Book Live issue

This appears to be an issue on how the drive was formatted and hard disk permissions. Before I go through a bunch of steps to fix, since this is an older post, is this still an issue or have you resolved it?!

Post back please.
 

http://www.techspot.com/community/topics/wd-my-book-live-issue.196247/
Relevancy 27.52%

Hi guys,

I have a Toshiba Satellite C870 and I can't seem to get the webcam working! I have updated to the latest drivers but I can't even seem to find it in device management... Does this mean that it could possibly be a hardware problem? Thank you in advance for all information that could help me find the solution!
 

A:Webcam not detected

Not a cure, but try this link. http://www.testwebcam.com/
then click allow in the box. If it works & is aimed at you, you should see yoursef. Good luck.
 

http://www.techspot.com/community/topics/webcam-not-detected.199125/
Relevancy 20.21%

Just upgraded form my old EVGA Superclocked GTX 570 to my new Palit GTX 770 Jetstream 4Gb, had to fanny around a lot with my Antec 900 case to get the beast to fit but everything seems fine now, card idles at 30-35c. Underload at around 65c. However the overclocking/temperature control software that came with the card, Thunder Master just does not quite seem up to par with EVGA Precision. Can anyone tell me if I can continue to use EVGA Precision safely and without any adverse effects with this Palit card because I just cant seem to get to grips with this Thunder Master. For some reason it trys to allways achieve 70c.
 

A:Temperature control software

andy06shake said:





Just upgraded form my old EVGA Superclocked GTX 570 to my new Palit GTX 770 Jetstream 4Gb, had to fanny around a lot with my Antec 900 case to get the beast to fit but everything seems fine now, card idles at 30-35c. Underload at around 65c. However the overclocking/temperature control software that came with the card, Thunder Master just does not quite seem up to par with EVGA Precision. Can anyone tell me if I can continue to use EVGA Precision safely and without any adverse effects with this Palit card because I just cant seem to get to grips with this Thunder Master. For some reason it trys to allways achieve 70c.Click to expand...

My recommendation is to use MSI afterburner for your temperature controlling needs and overclocking. It is non-biased and will work with any video card no matter the type, whether its amd of nvidia, and who made it.

Link here
 

http://www.techspot.com/community/topics/temperature-control-software.199318/
Relevancy 27.09%

Hello the product code of my laptop is HP B U PA ACJ windows bit I have built HP not 430 webcam laptop detected in camera It was working nicely at starting but since one year now its not working whenever I open my cyberlink youcam I get this error quot no webcam detected try plugging in a webcam into your computer now if you are using an integrated camera make sure that is turned on quot I tried re installing but it didnt work I checked my device manager The snap short of the same is below I entered msinfo in the run In components gt problem devices The following list appears- Ethernet Controller PCI VEN EC amp DEV amp SUBSYS C amp REV amp amp amp E The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this HP 430 laptop webcam not detected device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed Not Available ROOT WPD The drivers for this device are not installed PCI Device PCI VEN EC amp DEV amp SUBSYS C amp REV amp amp amp E The drivers for this device are not installed nbsp

A:HP 430 laptop webcam not detected

By default, Device Manager shows a device if it's connected and powered on.
> None of those hardware IDs are your web cam
> Look through Dev Manager under imaging device, USB devices and see if any "Other" device entries. Anything look like your cam? Any line item with a yellow icon (Other then the Ethernet and Network controller devices)

If not, then check if any way to power/on off the cam. Any on/off functions or switches on your laptop for the cam. If not, the cam must have failed. Unfortunately, I see alot of that problem on this forum
 

http://www.techspot.com/community/topics/hp-430-laptop-webcam-not-detected.199164/
Relevancy 27.09%

Hello,

I'm running Windows 7 on a Toshiba and recently encountered a problem. When I answer a skype call, I can see and hear my friend. But my friend was unable to hear or see me. I have checked the skype settings and Control Panel. Apparently the two built in mic and camera were not detected at all.
I've attached the diagnostic file which I observed was requested for in other threads.

Please help, much appreciated.
Regards!
 

A:Not detected - Microphone and Webcam

I've never used Skype, but it sounds to me like the problem is with your friend, not you. Have your friend check his/her settings & make sure your friend has the most current version of Skype.
 

http://www.techspot.com/community/topics/not-detected-microphone-and-webcam.198378/
Relevancy 50.74%

Afternoon Ladies & Gents!

I've spent a few hours on researching this topic. I can't seem to find what I'd need.

Currently I'm looking for a solution. I have about 50 franchised offices. We've played a TV in each of them. Is it possible to put a device in each office and have a "Server" type device to push content over a VPN to them? Also naturally display this on the TVs.

Any comments or points in a direction would be much, much, appreciated.

Thank you!
 

A:Client-Server Media Streaming

Perhaps a Slingbox would work for this?

http://www.ehow.com/how_6187809_multiple-viewers-slingbox.html
http://www.slingbox.com
 

http://www.techspot.com/community/topics/client-server-media-streaming.198059/
Relevancy 26.66%

I've been working on this webcam issue of mine for about the past five hours now. I've literally gone through, deleted off Lifeframe, Virtual Camera, Smart Logon, downloaded the drivers and keep getting an error "USB2.0 UVC VGA/1.3m/2.0M WebCam" every time I try running any of the drivers for it. I'm frustrated because I just installed a new one thinking my old one was perhaps defective. I've checked BIOS and haven't seen anything in reference to webcam, there's no imaging devices section in my Device Manager and I'm just completely confused as to what the heck is wrong.

If I can put any more information to be more assisting in my issue I will but for now this is all I've got.
 

A:Asus G73jh Webcam Not Detected

You could invest in one of these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16826193044
 

http://www.techspot.com/community/topics/asus-g73jh-webcam-not-detected.191948/
Relevancy 23.65%

Hi there
and really thanks
this is usefull tut
I want to find live ip s on my isp provider ?
how can I find all live ip s from my isp ?
I run the tracert www.google .com and find my isp s ip but now how can find out all live ip on my isp ?
please help me ?!!!
thanks again

Moderator note: This post moved from another thread.
 

A:How can I find all live ips from my isp?

Any ISP worth $0.02 would block your attempt to scan for these ... Virus' use this too and thus this is always suspect.
 

http://www.techspot.com/community/topics/how-can-i-find-all-live-ips-from-my-isp.197913/
Relevancy 28.81%

I am doing research for a friend as well as helping pick out his parts for a new build who wants to do the following in his own words:

Rendering 1080p videos with high lengths
Rendering intros that are 10 seconds but can take 30 hours to render (Not sure what he means here; obviously he does )
Uploading videos
School work
Streaming at High FPS while on good graphics
Photoshop
Gaming

His CPU is an AMD FX-8350 (eight core) and he has 16 gigs of RAM. The motherboard is not 3.0 compliant but everything I have read says as long as a MB has a PCI-E slot cards are backwards compatible.

Thanks.
 

A:Need Video Card for Rendering, Streaming, Photoshop

Since Adobe is now more dependent on OpenGL and moving that direction, your best bet is going to be an AMD card, what kind of budget are you looking at for said card?
 

http://www.techspot.com/community/topics/need-video-card-for-rendering-streaming-photoshop.197837/
Relevancy 21.5%

I have started to route CAT e cable to make a wired network I have a server running Server a custom desktop running windows laptops running windows I have the modem and the wireless router in issues to connecting network Having a server the library I have the modem connected to the internet port of the router and one of the loads is connected to a wall jack that Having issues connecting a server to network connects to a cable that runs about feet to its termination This termination is connected to a Having issues connecting a server to network port switch Having issues connecting a server to network The server is connected to the switch directly Based on my understanding my server should have access to the internet and my network should have access to my server With this setup I have full internet access on every machine but the server and I cannot access the server from any computer I have hooked up the server to a second wireless router as a load and was able to successfully access it through the second router but there is no internet The network on the server shows up as Unidentified Limited Access when directly connected to the switch Has anyone seen this before or have an idea to fix this issue nbsp

A:Having issues connecting a server to network

Load? It'd be easier if you drew a diagram. Some of the info is missing.
 

http://www.techspot.com/community/topics/having-issues-connecting-a-server-to-network.197147/
Relevancy 20.21%

Hi!

I remember when I first lost my Motorolas original CD, I couldn't find the software anywhere to be downloaded and no one that i knew had a motorola rzr mobile phone...

I found my old cd here a few days ago so I made an .iso file of it and uploaded it (as 13 .rar files, the file max size is 50Mb).

Here it is

Tel me if the link doesn't work or something.

http://cid-e198cc24bf261f09.office.live.com/browse.aspx/Motorola Razr?permissionsChanged=1&1
 

A:Motorola Razr v3 drivers and software

Yep that works for me.
 

http://www.techspot.com/community/topics/motorola-razr-v3-drivers-and-software.159146/
Relevancy 21.5%

Hello,

Where I work we need a need new server. I am not really a expert in hardware so I hope you can give me a little help choosing a fitting server, I will use a template with answers to help you understand what's needed:

1) What is the available budget?
Up to 2500? (3380 USD, 2094 GBP).

2) Which tasks will the server execute?
GPS analyses which is pure heavy computing. The amount of reading and writing to the disc is moderate. Internet traffic is low.

3) There is any preferred brand or there is any that is out of question?
Any reasonable brand.

5) Does the size of the server matters?
Should be a standard rack.


6) There are any specific requirements (interfaces, storage etc)?
- 8 cores (1x8 [preferable] or 2x4)
- 16 G byte memory
- 4 Tera byte disc
- fast CPU

I hope somebody can help me with some suggestions.
 

A:Buy new server - suggestions needed

I would refer to this good article.

This seems like a pretty good server for your specifications: http://goo.gl/1rIcjH.
 

http://www.techspot.com/community/topics/buy-new-server-suggestions-needed.196717/
Relevancy 19.78%

Good evening fellas The Problem This is an issue I have never run into before on numerous builds My computer wont reset from pressing the reset button or through software reset I was able Computer wont reset (Hard or Software) to get through windows installation by pressing the power button and powering back up This is when I noticed a second issue My computer wont boot to windows with the USB mouse and key board plugged Computer wont reset (Hard or Software) in Front panel or back panel its just a black screen It will post with the USB mouse and keyboard plugged in as I am able to press F to get into bios I tried rearranging the front panel connectors on the mobo running with only the power button hooked up running with the front pannel usb hooked up and looking around bios for any relevant settings cant find anything there related to boot Once in windows I test my hardware by playing about hours straight of AC and doing burn in tests with no errors I am at a loss The Background I recently bought Computer wont reset (Hard or Software) a replacement mobo and power supply to replace a pair that fried due to moisture I bought a new case because I fell out of favor with my old case that had a window pane and led lights and I upgraded my ram to gb x gb modules Essentially I only kept my TB HD DVD-RW Video Card and CPU I tested all of the hard ware I kept in a friends system he let me use for the purpose and those components all burned in well after about hours of benching and burn in testing with no errors The Hardware Mobo Asrock N C-GS http www asrock com mb NVIDIA N C-GS FX CPU Phenom X BE GPU Pallet GT Sonic Edition http www newegg com Product Product aspx Item N E RAM GB PC http www newegg com Product Product aspx Item N E PSU Raidmax Hybrid W Modular http www newegg com Product Product aspx Item N E nbsp

A:Computer wont reset (Hard or Software)

A strange problem indeed.

Triple check your wiring is correct using your motherboard manual. Be sure the motherboard is mounted correctly on the standoffs and no grounds are occurring.

Faulty buttons on the case itself?

Reset bios to optimal defaults, clear cmos.

After that I would return the mobo.

Sorry I cant be more specific, Hope this helps.
 

http://www.techspot.com/community/topics/computer-wont-reset-hard-or-software.196539/
Relevancy 19.35%

My computer battery was replaced by a family member and when I boot up my PC which took about 10 minutes instead of 30 seconds. I noticed that the 2 harddrives were displayed in the bios as raid drives. The 2 harddrives are SATA. However in Windows when I right click on My Computer and select Manage then Device Manager they appear as NTFS format.

I sure that this configuration has something to do with response.

I would appreciate any suggestions on how to restore my raid drive back to 2 harddrives under NTFS without loosing my data. I would prefer a software tool or a step by step solution since I am not comfortable with manually making changes to computer settings.
Thank you for your advice in advance to this frustrating problem
Regards
Ntracs (Joe)
 

http://www.techspot.com/community/topics/converting-raid-harddrives-back-to-ntfs-with-software-tools.196141/
Relevancy 21.5%

I read online that some people, while making their server build, had to drill holes in the case's back plate or just buying another case. I was just wondering if with this case and motherboard, I would have to drill holes because I know that with server motherboards there isn't really a standard. Thanks to anyone who helps out!

Case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811147155

Motherboard: http://www.newegg.com/Product/Product.aspx?Item=N82E16813182182
 

A:Server Motherboard with case help

You need to find a rack that can support E-ATX motherboards (extended ATX). Do you need a rack? Or is this just a workstation?
 

http://www.techspot.com/community/topics/server-motherboard-with-case-help.195224/
Relevancy 21.93%

I posted this before with no answers I also posted this somewhere else with no answers lol So I m going to try more time I bought a motorola cpx series server at a auction I had no idea what it was and now I know it s a telecommunications server Although I really know nothing else about it I can t find any info on it anywhere either The tech that pulled it told me it works great just a with telecommunications What server ? to do out dated for What to do with a telecommunications server ? the state to use and if I don t have the equipment to use it it would make a awesome computer case lol I have no idea how to use this or even make it a computer lol I m alil techy I have built computers but What to do with a telecommunications server ? that s about all I know Looks What to do with a telecommunications server ? like this http thumbs ebaystatic com d w m mfQ ZtZGCaIxXoxNR I have posted on other forums for help and got nothing ANY help would be great thx If you have any questions or need to know anything about it I will answer what I can thx for the help nbsp

http://www.techspot.com/community/topics/what-to-do-with-a-telecommunications-server.194219/
Relevancy 37.41%

I am using a video surveillance program (webcamXP), and I would like to use both my integrated webcam (laptop) AND my logitech webcam (C310) as sources; however, it looks like my integrated webcam is not accessible when I plug in the UBS webcam. From the program's perspective, there is only one source which corresponds to whatever webcam is available (integrated webcam when USB is unplugged, and vise versa).

I would expect both sources to be available. I'm thinking somehow the computer is seeing the USB webcam and just overriding the integrated webcam. Is there anything I can do to verify this and/or change it to make both available?

It's totally possible that it could be the program, but I was unable to find any settings to get it working.

I'm running Windows 7.
 

http://www.techspot.com/community/topics/usb-webcam-overrides-integrated-webcam.194016/
Relevancy 23.22%

Some shares on my 3+3 my book live duo RAID1 are no more accessible, they are shown as 0 bytes. It seems that the share table was corrupted, nevertheless the data are there (ther is still the right used space on the disk)
I spent two months exchanging mails with the WD support and the only suggestion I received was to reset the system and loose the data.
otherwise I could access one of the disks directly but neither windows neiter linux can read the disk (they cannot even mount it).
first a complain: why I should spend a lot of money to have reliable disks in raid1 configuration if a bug in a proprietary software can fool my efforts.
second a requst for help: does anyone knows how to read the damned disk?
thank you for any suggestion.
 

A:WD my book live duo: disappeared shares

Please describe the connection of the RAID to the PC.
 

http://www.techspot.com/community/topics/wd-my-book-live-duo-disappeared-shares.193676/
Relevancy 21.5%

Hello all members,
I was searching for dedicated server for one of my clients and whenever I find a new host, I try to test dedicated server speed by downloading sample files. Recently, I have tested atlantic.net dedicated server speed, but how can I be sure that this speed will remain the same for my client's after buying?

FYI, here is the link from where I have tested dedicated server speed:




atlantic.net/dedicated-servers/dedicated-server-speed-test.htmlClick to expand...


 

A:Dedicated server speed test

Hmm; would appear that you are referring to a network bandwidth test.
However, as I write this Atlantic.net is DOWN - - ping just gets 110% timeouts.

This link has some reviews you might like to see.
 

http://www.techspot.com/community/topics/dedicated-server-speed-test.192319/
Relevancy 21.93%

Hello Guys,
I am looking for list of Public DNS server which like powerful one and I find a list like that:
(Powerful means that I like to have DNS server which should be fast, reliable, high speed and always available)
But I want more, anybody has idea how can I find more?

208.76.50.50
216.146.35.35
37.143.9.90
89.233.43.71
74.82.42.42
109.69.8.51
216.52.65.1
216.83.236.227
216.54.2.10
79.143.176.79
91.218.228.249
216.250.190.144
216.215.19.4
216.211.191.9
198.153.192.40
67.138.54.120
195.46.39.39
205.210.42.205
74.207.247.4
199.5.157.131
216.211.191.3
64.136.173.5
64.136.164.77
64.135.2.250
68.87.85.102
68.87.78.134
85.38.28.86
85.38.28.84
209.244.0.3
8.8.8.8
184.169.143.224
8.26.56.26
208.67.222.222
156.154.70.1
91.186.192.3
91.185.6.10
91.185.2.10



I am looking forward to hearing from you guys

Thank you so much


Yohann
 

http://www.techspot.com/community/topics/public-dns-server.193245/
Relevancy 27.52%

Good day, I have a problem dealing with my built-in webcam. My laptop is samsung NP300E5A.
The webcam can be found at my device manager but whenever I use programs like skype it says that "No camera found"..I tried uninstalling it and re-install it again, but still the same thing as it. thanks! Badly needed help. ;(
 

http://www.techspot.com/community/topics/webcam-problem.193080/
Relevancy 25.37%

Greetings all hope you are doing fine Situation - I have a Mb DSL connection - Speed while downloading a file using Internet Download Manager is between - KB sec - Browsing streaming speed is between - KB sec - Speed while downloading a file using any browser is between - KB sec - Downloaded the TCP Optimizer and applied the Optimal settings Did not solve the issue - Followed the instruction here gt gt http www speedguide net articles w -tweaks- Did not solve the issue - TCP Analyzer is saying that my MTU is but in my router and in my NIC it is - Speed Test in Safe Mode can sometimes yield better results - Tried disabling all start-up items Did not solve the issue My setup OS Windows x NIC Atheros AR AR AR Router SMC WBRA Connection Type Ethernet ----------------------------------------------- Speed Test Results SpeedGuide net TCP Analyzer Results Tested on IP address xx xx proxy Client OS browser Windows Chrome TCP options string c MSS MTU TCP Window NOT multiple of download speed Fast browsing/streaming low speed, MSS RWIN Scaling bits Unscaled RWIN Recommended RWINs BDP limit ms kbps KBytes s BDP limit ms kbps KBytes s MTU Discovery ON TTL Timestamps OFF SACKs ON IP ToS ------------------------------------------------ Thanks nbsp

A:Fast download speed, low browsing/streaming speed

Set the MTU in the router itself to 1492





Analyzer is saying that my MTU is 1460, but in my router and in my NIC it is 1500Click to expand...

the normal value for DSL is 1492, and 1460 is INVALID = = must be a multiple of 8.

Manually set {1472 or 1464} in the router.

The article cited has good info but I would opt for all the defaults.

restore:

netsh int tcp set heuristics enabled
netsh int tcp set global autotuninglevel=normal
netsh int tcp set global rss=enabled

see this article to set SackOpts=1
 

http://www.techspot.com/community/topics/fast-download-speed-low-browsing-streaming-speed.192638/
Relevancy 26.66%

Hi, so my integrated webcam isn't showing up and I'm trying to confirm whether it's died or not. I know the first step is to go to the manufacture's website, but as an Asus user I wasn't able to find anything to help me solve this problem asides from this model knowledge base.
http://support.asus.com/knowledge.aspx?SLanguage=en&p=3&s=225&m=N71Jq&os=&hashedid=hUn2kMS4sU3z3kUV

Here's my Device Manager Data link below (first time using mediafire so let me know if it works)
http://www.mediafire.com/?859fft7ex08dunwz99c1c9b88e7gorp

Model info:
ASUS N71Jq
Windows 7 x64

Thanks so much!
 

http://www.techspot.com/community/topics/integrated-webcam-not-appearing-in-device-manager.192438/
Relevancy 27.52%

Having some trouble with the built-in webcam I have on my laptop. I bought it used from a friend (it's a custom built laptop), and am only having this problem recently. I believe I've uploaded the correct info, if I understood the directions. Any help is greatly appreciated!
 

A:Webcam not detected

Any CD come with it? If not, I'd suggest going to the manufacturers website of the webcam & get any updates for it.
 

http://www.techspot.com/community/topics/webcam-not-detected.191825/
Relevancy 20.21%

See the description in full on the Cisco.com/security site
 

A:Multiple vulnerabilities in Cisco ASA software

I read about this yesterday. This is a big exploit and needs to be fixed. Too bad there are too many newbies that wont know how to update the firmware or arent even aware of this issue.
 

http://www.techspot.com/community/topics/multiple-vulnerabilities-in-cisco-asa-software.191502/
Relevancy 19.78%

I want to buy a laptop to run professional recording software. The minimum requirement is an Intel Core 2 Duo E8200 2.67GHz. Can I use a quad core with less speed. What are my options?

Thanks
 

A:Help understanding minimum processor requirements for recording software

Is there a trial version of the software for you to test on your current system?
 

http://www.techspot.com/community/topics/help-understanding-minimum-processor-requirements-for-recording-software.191471/
Relevancy 22.79%

Hope this is the right forum for this topic I have acquired an NTFS I an with How resize GParted Live? partition do old Pentium laptop It has a GB HDD installed all one NTFS partition and How do I resize an NTFS partition with GParted Live? about GB of software I want to clone the drive on to a GB keeping the existing software so that I can use the GB elsewhere but first I need to resize the C partition down to below GB I have downloaded gparted-live- - and burnt it to a CD but it is unable to resize an NTFS partition It says it needs ntfsprogs ntfs- g The trouble is that even if I downloaded ntfsprogs I would not know what to do with it Presumably it has to be on the CD but to get there it would have to be included in the iso file before How do I resize an NTFS partition with GParted Live? I burned it I am a total Linux ignoramus and if this involves the sort of operation I suspect it is an order of magnitude beyond my IT skills Can anyone give me some idea of what I would have to do Thanks Steve nbsp

http://www.techspot.com/community/topics/how-do-i-resize-an-ntfs-partition-with-gparted-live.189402/
Relevancy 31.39%

We had:

1) 1 Windows Server 2003 running Active Directory services to manage logon and permissions for file sharing.
2) 15 workstations.

We now want to have:

1) 1 Windows Server 2008 R2 server running Active Directory services to manage logon and permissions for file sharing.
2) 15 same workstations, with their same user profiles.

So I joined the 2008 R2 server to the domain, and then used the dcpromo tool to make it a domain controller.

Problem is, whenever I take the old server offline, (the 2003 one) everything flips out, logons are slow, and the 2008 server gives people trying to access shared files weird errors like that the server that authenticated them cannot be contacted, and asks them to log in again with their username and password before accessing shared files on the server.

What did I do wrong? I must be forgetting something.
 

A:Replacing a Windows 2003 AD DS server with a 2008 R2 AD DS server

1. Transfer all FSMO roles to your 2008 R2 server
2. Uninstall AD on 2003 server
3. You can now permanently take 2003 server offline
 

http://www.techspot.com/community/topics/replacing-a-windows-2003-ad-ds-server-with-a-2008-r2-ad-ds-server.189290/
Relevancy 21.5%

So computer A(brother) has hosted a minecraft server. Computer B(Me) can connect to it from the outside world. Computer C(Friend) can not connect to it, Also outside world. Computer B is 45 min away where computer C is a 45 sec walk down the rode, same ISP. Any help? We all would greatly appreciate it. Also so same thing is happening with a Teamspeak server, Computer A host, B able to connect, C still nothing.

Note: computer C can get on other Minecraft servers and other Teamspeak servers.
Thanks alot
 

A:One computer can connect to Minecraft server, another can't

If computer C can connect to other severs then most likely the problem lies in computer A. Check firewall rules, try disabling computer A's firewall.
 

http://www.techspot.com/community/topics/one-computer-can-connect-to-minecraft-server-another-cant.188700/
Relevancy 27.09%

I installed an external webcam to watch the deer in my back yard. My interal cam is now picking up the feed from the external one. So far, the only way I have found to fix that problem is yo unplug the external cam. Is there a way around this?
 

A:Asus all-in-one internal webcam

The internal camera is showing me what the external one is seeing. I want to keep both cams and use which ever one I want, depending on the situation.

I will try and explain it better. My external cam is looking at my back yard. My internal cam, the one built into the pc, is looking at me. I should see my back yard when I activate the exteral cam, and I should see me when I activate the interal cam. What I am getting when I activate the internal cam, is my back yard. The internal is instead, picking up what the external cam is seeing, which is my back yard.
 

http://www.techspot.com/community/topics/asus-all-in-one-internal-webcam.188741/
Relevancy 27.52%

Hi,
When I sign in to messenger and start a video conversation there is a problem with sound. The people I am webcaming with can't hear me at all. However, at the beginning of the conversation they can hear me well but after a minute it stops.
Anyone has any clue?
Thanx in advance!
 

A:Webcam problem

Labinot said:





Hi,
When I sign in to messenger and start a video conversation there is a problem with sound. The people I am webcaming with can't hear me at all. However, at the beginning of the conversation they can hear me well but after a minute it stops.
Anyone has any clue?
Thanx in advance!Click to expand...

Might go to the manfacturers website to see if there are any driver updates. Other than that, make sure ALL connections are secure.
 

http://www.techspot.com/community/topics/webcam-problem.188582/
Relevancy 19.35%

My computer running Windows Ultimate -bit can no longer access my Western Digital Caviar quot Black quot TB hard drive that s connected but I suspect my data to still be in there so I wonder what data recorvery tools people have used and recommend This is one of the additional drives to my operating system C drive It has been formatted as NTFS and been working fine for several months until with recommendations Data format, from drive please lost recovery software a week ago Now it appears as the E drive on Data recovery from drive with lost format, software recommendations please My Computer as originally configured but the volume label is now blank I used to have that named as quot Media quot When I double-click on it to Data recovery from drive with lost format, software recommendations please enter the drive I get the Data recovery from drive with lost format, software recommendations please error message quot E is not accessible The parameter is incorrect quot In Computer Management -- gt Storage -- gt Disk Management the drive appears but it s File System is now indicated as RAW rather than NTFS I have tried using Active Partition Recovery and that successfully lists my drive with the original label name quot Media quot and as NTFS and also lists the folders located at the root of the drive which is why I suspect my data to still be in there and recoverable However when I use this tool to do a full scan of my disk it freezes after scanning MB There are tools out there with varying reliability so whch ones do people here recommend another tool I trired I forget its name was scanning my disk but prediced days to go over the entire TB so that s out of the question I have been told to use a tool that can recover files onto a separate disk rather then try to repair the original disk and risk losing more of the original data Any advice would be greatly appreciated Thanks nbsp

A:Data recovery from drive with lost format, software recommendations please

Oh crap. Something like this happened recently to me when I had backed up some data to an USB thumb drive. It worked fine for awhile, then some weeks later, my PC just couldn't read it anymore (kept saying "disk in drive needs to be reformatted/etc"...and the properties for the drive also showed it as RAW format instead of FAT32 like it would have been usually).

I think the issue is drive corruption, which seems to be fairly common with external devices like USB drives, but odd in the case of an internal drive. The remedy for me was to try to access it from a different system, which was easy since being a USB stick I could try it elsewhere easily. If you can use another system to access the drive, preferably a Linux/Ubuntu based one; it is likely your best bet to recoup the data before its lost permanently. An external HDD kit would be ideal, and they are quite cheap also.


Hope this helps!
 

http://www.techspot.com/community/topics/data-recovery-from-drive-with-lost-format-software-recommendations-please.187901/
Relevancy 29.24%

What is the highest Quality video currently in the world nowadays there are alot of 1080 and 720 but are there any higher like 1280 or something higher??
 

A:Highest quality streaming video?

1080P is the HD standard at this point. There will post likely be a 4K option in the future, but Youtube is still struggling to add 3D support, so dont expect it any time soon. But with HTML5 finalized as of yesterday, youtube will begin to roll it out within the next year I am guessing
 

http://www.techspot.com/community/topics/highest-quality-streaming-video.188266/
Relevancy 21.07%

So we have a server at one of the places I work that is a domain controller and DNS server website domain server controller pointing DNS to of instead address as well as an smtp server The domain is named companyname com The website is you guessed it companyname com Now why they set this up like this I don t know but because they have every now DNS server pointing to domain controller instead of website address and then the DNS server decides to point companyname com to the domain controller and ignore the fact that I have a www Host A record pointing to the web server s external IP address and a record saying DNS server pointing to domain controller instead of website address that DNS server pointing to domain controller instead of website address companyname com should also point to the web server s address The problem seems to stem from that when the server reboots for updates it of course forces the DNS server records to update and it puts an entry in there that contradicts my static records with the domain controller s local address in for companyname com Can I force it NOT to put a certain entry in there or rather not update a certain entry that it has in there Or can I force it to treat my static records as primary I m fairly new to this as I ve not dealt with this issue before and I m out of ideas nbsp

A:DNS server pointing to domain controller instead of website address

Hmm; for the External DNS accessible to the web

create a CNAME for www.company.name
create another for dns.company.name.
each pointing to unique IP addresses
this dns ONLY supports publicly available services; NOTHING internal

the Domain Controller should have a SEPARATE DNS, internal to the LAN, not accessible to the Web.
Internal users configured to -> internal DNS which performs recursive lookup to your ISP's DNS.
 

http://www.techspot.com/community/topics/dns-server-pointing-to-domain-controller-instead-of-website-address.187372/
Relevancy 29.24%

I recently bought a new TV with streaming ability and im having problems allowing it to see my PC on the network. Previously I had a Pc - ADSL Router - xbox/tv setup, but now to save me having to swap the cable from the xbox to the TV all the time ive added a router in on a different IP. My ADSL router is the usual 192.168.0.1, with the PC being on 0.2. The new router is on 1.1 and my TV cannot find my PC. I know theres a way to do it with subnet but im not sure how. I do have a 36 port switch aswell but dont fancy having to run extra cables which defeats the reason for the new router.

if anyone can help me id be glad to try it.
 

A:Video streaming on subnet?

Frenzy said:





ive added a router in on a different IP. My ADSL router is the usual 192.168.0.1, with the PC being on 0.2. The new router is on 1.1Click to expand...

oops. get it all on the same subnet like this:


Code:
Router#1(192.168.0.1) ---------( lan port )NewRouter(Lan port)---->TV
leave the WAN port on the new router EMPTY, which will make it act as a switch.

For this to work as shown, New Router must have the DHCP service disabled.

PS: that's exactly how I serve my HD Samsung.
 

http://www.techspot.com/community/topics/video-streaming-on-subnet.187080/
Relevancy 26.66%

My integrated webcam doesn't work
 

A:Integrated webcam doesn't work

What is the make and model of the device the webcam is integrated into?
 

http://www.techspot.com/community/topics/integrated-webcam-doesnt-work.187058/
Relevancy 27.52%

I was wondering if some of you might be able to add some facts to a discussion I have been having with some friends They say that it is possible that someone can watch quot you quot through the webcam of your computer There was a CSI one of those cop Webcam: me? someone watching Is shows anyway episode that had the murder watching people like that It was even suggested that employers might do this on company owned computers My friends keep paper over the cam when not in use I say that it is possible but the watcher would have to Webcam: Is someone watching me? access the computer and install a software program to do the job This program would be found in your drive somewhere Is this true Is there some way to verify my system is clean if it is true Is there anyway of doing it remotely without accessing the computer I m guessing that I ll be told this is ridiculous thinking If it is true may I suggest that in your answer you leave out how to do it and focus on protection nbsp

A:Webcam: Is someone watching me?

A good hacker can use Remote Desktop to access the device, SO - - disable it until you need a Skype session and disable when done.
 

http://www.techspot.com/community/topics/webcam-is-someone-watching-me.186359/
Relevancy 22.36%

Recently I set up a server just for what I thought was fun of doing it. but now I'm having a hard time deciding what to do with it. I don't necessarily want to sell it, but I need to do something with it so its working for me rather than me working to keep it up and running.

(for a do it yourself project I don't see it being worth anything/attractive to anyone else. if it is I'm not sure how to go about selling it. this would be terms of how to make it appear attractive to a potential buyer, if I could ever find one.)
 

A:What should I do with my server?

You could have all your desktops and laptops back up to it on a regular schedule. Can also store all your media on it and then buy the smaller faster SSDs for current systems.

Perhaps some more information about your other computers and networkable devices is needed before a very good answer can be given.
 

http://www.techspot.com/community/topics/what-should-i-do-with-my-server.185843/
Relevancy 21.93%

Please help!!! I give my friends the exact IP and it says "can't reach server" On my computer it works perfectly. They try direct connect and it doesn't work either! I've tried unblocking the windows firewall.

Minecraft Version: 1.2.5

Operating system: Windows 7
 

A:My friends can't get on my server

More then likely you need to unblock the ports on your router. **Updated: I assume this "server" is your minecraft server as you stated minecraft, the ports I listed are for minecraft**

If you are familiar with unblocking ports on the router then Unblock ports: 25565(TCP) and 25565(UDP)

If you are unfamiliar, you may need to look up a guide for your router. Or tell me the model you have and I will do my best to help you unblock the ports.
 

http://www.techspot.com/community/topics/my-friends-cant-get-on-my-server.181867/
Relevancy 21.07%

Hi I got from a friend his old computer that according to him it wasn t working anymore The MB its a Gigabyte GA- I p-G I got it running My idea for the computer is to use it as a small media server to stream to my tv s Now HDD motherboard IDE regarding about Home SATA question server & here comes the Home server question about motherboard regarding IDE & SATA HDD question this motherboard has Home server question about motherboard regarding IDE & SATA HDD IDE ports and SATA ports Can I use ALL of the ports I want to get it fill with HD s to save all my media thats why I am asking Will it work with all the ports full I dont want to spend money in a entire new computer right now I dont know if it can work with all IDE used plus adding SATA HD I want it to end like this IDE GB HD MASTER DVD DVD-RW SLAVE IDE GB MASTER GB SLAVE SATA TB SATA TB I am Home server question about motherboard regarding IDE & SATA HDD just missing right now the sata HDD s and plan on buying them but I want to be sure I have the manual but it doesn t say anything about conflicts or something do you guys know anything about it Here is the link for the MB specs and manual http www gigabyte com products product-page aspx pid sp nbsp

A:Home server question about motherboard regarding IDE & SATA HDD

I recall comments re mixed IDE + SATA but don't recall the specific reference.

What should work is:

bootable system on one device (eg IDE)
storage device(s) shared (eg SATA)

 

http://www.techspot.com/community/topics/home-server-question-about-motherboard-regarding-ide-sata-hdd.184490/
Relevancy 17.2%

I have been doing research on purchasing 4-bay+ external RAID enclosure for myself. I have done research on software vs. hardware raids for this system, but one question still eludes me; so I am going to ask it here directly.

If I buy software RAID enclosure I will have to use some included software to set-up my raid. So, if I take my enclosure to another PC and plug it in (let's say eSATA) I will not be able to read the data, correct? If I get true hardware raid, the raid set up will be on the build in controller so I will be able to take the enclosure from computer to computer, right?

And since TS has new poll feature lets try it out...
 

A:Hardware vs. software RAID on 4-bay+ RAID enclosure

Regardless of whether you use software or hardware RAID, the enclosure will work whatever you plug it into. The only thing that might not work is connecting an individual disk (used as part of the array) into a device. It all depends on whether the device in question can read the controller used for the RAID set up.

For example, I ran with RAID 1 for two 2TB hard drives in my PC, but I can connect one of them to the same device as a non-RAID disk -- which I successfully did when the RAID broke down for an unexplained reason.

However, it is unlikely to work in a computer, and you should approach it as not working at all in anything but the RAID enclosure. It's also worth pointing out that splitting RAID disks in such a way could corrupt the data. Given that pretty much every decent RAID enclosure worth its salt will include gigabit ethernet at the size you're looking for, availability shouldn't be an issue across your LAN.

Hardware-based RAID arrays are also more reliable in operation, and have the extra benefit of being recoverable in a controller failure by replacing it with the same version as before. Software RAID's are less reliable, slower performing and in the event of a controller failure can be difficult to bring back online.

Basically, when it comes to RAID arrays, don't skimp on cost. The better the quality/controllers the more reliable and better performing it will be.
 

http://www.techspot.com/community/topics/hardware-vs-software-raid-on-4-bay-raid-enclosure.185358/
Relevancy 27.52%

I had my laptop build to include a webcam. I recently purchased a Logitech webcam because I can move it around. During the installation of the Logitech software I remember a screen prompting me to check which webcam I want to use - I checked the external Logitech webcam. I now want to go back to the build-in webcam.
How do I do this? (I am a total computer novice).
Thanks
 

A:Built-in webcam

What application are you using to access the webcam? (Skype? ICQ?)
 

http://www.techspot.com/community/topics/built-in-webcam.185122/
Relevancy 21.5%

Hi all this is driving me nuts Fresh windows SP setup Problems Server on 2003 reading USB HDD 2TB x Buffalo tb external USB hard drives It worked for me a few day ago with no problems I was able to read and write Yesterday I went to configure backups and this is what is happening Drive detected in device manager in disk manager comes up as basic disc with partition of GB but doesn t say NTFS and so has no drive letter when clicked Problems reading 2TB USB HDD on Server 2003 on properties getting error message quot The operation canceled due to an internal error quot If I try format partition diskman locks Problems reading 2TB USB HDD on Server 2003 up I can delete partition ok Tried creating a small Gb partition but still having same issue I can read USB memory sticks ok All hdds are behaving the same way on server All are perfectly workable on another computers W XP I have tried re-installing chipset drivers - didn t help The only major change I can recall since it was working - ESET Antivirus was installed but I don t think it could be a problem Please Help nbsp

A:Problems reading 2TB USB HDD on Server 2003

Usually you will need a 64 Bit system to be able to read any drive with a total compacity of over 500 gigabytes. If possible I would suggest upgrading to Windows Server 2012 in order to fully take advantage of your TB drives.
 

http://www.techspot.com/community/topics/problems-reading-2tb-usb-hdd-on-server-2003.184297/
Relevancy 21.93%

I want to make a gaming server with a micro Atx motherboard , but I'm not sure what I would need the most . I mean money being tight , should I look for 1 that holds alot of ram or just settle for 1 that hold 8 g or so. Also with Processors being so high should I get a AMd quad or would something smaller work. This server will just be for me and my friends , maybe 20 ppl at the most. I talked to a guy about it before he told me I needed at least a quard core and over 8 g of ram, and 500g hdd. I guess I'm just maken sure before I spend the money.
 

A:What should I look for in a server motherboard?

There is a server class of motherboards but I don't think that is what you are looking for. Building a PC with server class parts can get very expensive. I see no reason why you would need a server class PC to play games, unless you wanted a motherboard with two/four CPU sockets

Questions:

What is your budget?
What types of games will you be playing?
How many monitors and at what resolutions will you be using?

 

http://www.techspot.com/community/topics/what-should-i-look-for-in-a-server-motherboard.184663/
Relevancy 21.93%

So, say, I wanted to make a certain website in the UK think I was in the UK. Theoretically.

How would I go about doing that?
 

A:Proxy server

gwailo247 said:





So, say, I wanted to make a certain website in the UK think I was in the UK. Theoretically.Click to expand...

Yet subject is PROXY SERVER; which is it? Please describe your intent - - btw: Physicality is not relevant here.
 

http://www.techspot.com/community/topics/proxy-server.184016/
Relevancy 21.5%

I have a minecraft server, but I can't forward the port with my router. I believe the issue lies with the "LAN port" option. I don't know what to put for that.

I have a Netgear 7550. Can't seem to find any information on the router from netgear. My ISP is ATT.
 

A:MInecraft server port forwarding help

did you see the TUTORIAL on the subject? . . . if not, go to that forum and do some reading
 

http://www.techspot.com/community/topics/minecraft-server-port-forwarding-help.184159/
Relevancy 20.21%

So about once every 30 minutes, my keyboard, disconnects, and reconnects. Like it's being unplugged, and re-plugged back in. It is not the keyboard, or the USB port I am using. I have tested it in several different USB slots, but the same problem happens. It is software related. And is bugging the living hell out of me. I have reformatted and the same exact problem happens. And my friend has the EXACT problem but with his mouse.

Any advice would be greatly appreciated. I have googled the problem and searched, but nobody has a real solution.

Thanks!
 

A:Keyboard software issues?

Some relevant system specs-

-Running LEGIT version of Win7 64bit
-8gb ddr3 Corsair Vengeance 1600
-ASUS P8Z77-V LK Intel Z77 Chipset
-Intel Core i7 2600k
-1tb 6.0gb/s 7200rpm Western Digital HDD
 

http://www.techspot.com/community/topics/keyboard-software-issues.183811/
Relevancy 27.52%

Hi there,
I own a Sony VAIO F series laptop. Recently, around 2 weeks ago, I suddenly cannot use my web cam (Motion Eye), the green light next to it, is on, indicating it's working, but no picture displays, onscreen, on Live messenger, or on Facebook video call.
This have happened to me once before, where Sony support told me to do system recovery; but did not solve the issue. Then they took it away, and returned it back to me within a week telling me it was some sort of software conflict, and the hardware was functioning perfectly.

I was hoping if anyone can give me a few pointers on how to get my Motion Eye working again.
Many Thanks.
Hope I'm posting in the correct section.

David
 

A:Webcam with no picture

There is no reason to not think it is still a software issue... Sony probably wanted you to do a factory restore and not a system restore. There is a difference between them
 

http://www.techspot.com/community/topics/webcam-with-no-picture.182696/
Relevancy 21.5%

I am experiencing the problem described below responding not DNS server Primary is I got an internet from provider which is LAN cable sticking from the wall - and it works fine when I connect via LAN cable - when I write the IP Address Subnet Mask Default Gateway and DNS servers on the LAN adapter and create a PPPoE connection with username and Primary DNS server is not responding password I want to do the same but wirelessly I have an ASUS RT-N LX wi-fi router - and connected the cable from the provider to the WAN slot on the router Then I have accessed the router from my laptop http - and configured everything as it was on my laptop IP Adddress Submask Default Gateway DNS DNS Wireless network works fine Primary DNS server is not responding the default gateway is pinging - but DNS Primary DNS server is not responding servers are not accessible As a result no internet connection available Moreover - when I want to ping the DNS ping - I tries to get a response from other location but no response from there Any feedback hints comments will be greatly appreciated I have spent days for it but in vain THanks in advance nbsp

A:Primary DNS server is not responding

192.168.1.250 & 192.168.1.10 have been configured at one point in time to be the dns servers set in the router. Obviously they do not work now... I would recommend changing them to maybe an open dns ip: 208.67.222.222 & 208.67.220.220, or even google's dns of: 8.8.8.8

Hope this helps, take care!
 

http://www.techspot.com/community/topics/primary-dns-server-is-not-responding.181946/
Relevancy 21.07%

So my girlfriend and I have been playing MC for a while now on my server (separate households) and no problems have occurred until now. I have not changed any settings of the server or my router settings, but now all of a sudden she gets a "connecting......." message with a follow up "failed to connect" error. My port forwarding is fine, and so is the ip address I am giving her to connect.
And ideas to what may be wrong here?
 

A:Another classic Minecraft server connection issue

Ok, this one has been blank for a few days so I'll take a stab at it!

So you are hosting a game on your pc that your gal connects to. You have port 25565 forwarded to your pc running the MC server. You have given your gal your real world ip address so she can connect to your server. When she connects she gets a "connecting..." error. Have I got all of this correct?!?

Assuming all the above is correct, here's what I think... More than likely your ISP gives you a dynamic IP address, meaning it can change from time to time. To make sure you know what your "real world" outside IP address is, go to: http://canyouseeme.org/ this will give you the correct "real world" ip address. While you are there, check to see if the port is open for MC. Have the MC server running before hand, go to http://canyouseeme.org/ and type in port 25565, the website will tell you either "success" they were able to connect, or "fail" they were not able to connect. IF you get success then you have everything configured correctly on your end it may be something on her end - if not, then it's something on your end. Make sure your gal is connecting to that IP, on port: 25565 inside of MC. MC may or may not ask for a port number, I'm not 100% sure on that one because I do not play MC. IF she is still getting the errors, she needs to check her software firewall settings (built into win xp, vista, 7) or 3rd party "internet security" software often has a software firewall as well. In the firewall settings, TCP port 25565 outbound needs to be permitted. If that is already in place or NOT an issue to start with, make her power cycle her internet connection (cable, dsl, t1, etc.) and her router. (the devices may be one in the same) Have her try again, if still no dice... Post back & I'll think of something else for you to try.

Hope this helps, take care!
 

http://www.techspot.com/community/topics/another-classic-minecraft-server-connection-issue.181421/
Relevancy 21.93%

Recently Windows updated both my partner's and my laptop with 23 updates for Vista. Ever since those updates over the weekend my partner keeps on getting a proxy server window appear on his desktop asking for a password.

We have Virgin wireless broadband and changed over from 3 Broadband. I told my partner to uninstall 3 Broadband, which he has done but it still comes up with this window. We have gone into all the Internet connection windows and unticked any option for a proxy server and it still comes.

Is there anything we can do that we haven't tried yet?

Compused
 

A:Proxy server

Ok, this question is quite old, so I'm going to take a stab at it!

I'm assuming that since you have Virgin wireless and going from 3 broadband that you are in the UK. I have zero experience with anything in the UK as b/c I'm in the US. Nevertheless, I'm going to try and assist you the best I can.

I'd say uninstall all Virgin wireless & 3 Broadband software that is on the computer. IF the virgin wireless connection is a regular wireless router in your home, then just simply connect to the wifi network is shows when you use the built in wifi software for windows, enter the wireless password & you should be good to go. IF the virgin wireless connection is a USB adapter, then reinstall the software accordingly, run the program and it should connect. As for this proxy window popping up, I'm really not sure why it's doing that, is it a windows proxy window or a window from the virgin wireless software?! either way, take a screenshot & post back.

Also post back specs on the system in question, info on the type of wireless connection you have from virgin wireless (USB, PCMCIA, wifi hotspot device, etc.).

Hope this helps, take care!
 

http://www.techspot.com/community/topics/proxy-server.180946/
Relevancy 50.74%

Need info on live streaming multi-cam set up for video conferencing Hello computer experts I hope i am posting this in the multi-cam lesson Want cooking a live streaming to interactive launch right forum I am interested in starting an online live interactive cooking lesson series I want to stream the lessons for - people using a video conferencing program goto meeting VeaMea not sure which one yet through our laptop I want to have two or Want to launch a live streaming interactive multi-cam cooking lesson three cameras running Want to launch a live streaming interactive multi-cam cooking lesson through my laptop that i can toggle through One would be a wide shot of me and the kitchen Another would be a close up of the cutting board to demonstrate cutting techniques and or one camera mounted above the stove for when i am cooking I want to be able to change cameras with a click of the mouse during the lesson and then be able to change back Can I hook up or cameras to my laptop Intel core i - m with gig ddr and accomplish what i want to do I am currently looking at high quality HD webcams but not sure if this route will be enough for the main camera It may need to use a lipstick or bullet style camera Any help or guidance would be very much appreciated If this is not the best forum and you know a better one please advise Thanks Willy nbsp

A:Want to launch a live streaming interactive multi-cam cooking lesson

I have some thoughts on this one, but it's a fairly old post. Post back so I know you are still needing help.
 

http://www.techspot.com/community/topics/want-to-launch-a-live-streaming-interactive-multi-cam-cooking-lesson.176621/
Relevancy 19.78%

Hi, I'm building a new system because trying to work on an athlon x2 240 involves too much self harm.

I have been reading around, and it seems that the 2500K is generally better in all regards despite having 2 less cores.

My main priority is rendering time in 3ds max, so regarding that, which cpu would be the better buy?

Thanks
Astralogic
 

A:Which of these CPUs is best for 3D software redndering? 2500K or 1100T?

It turns out that the 100T is better for 3ds max. I was afraid the 1100T would come out on top, I spent ages researching the right motherboard to get with the 2500K now I gotta start again

You wouldn't happen to know an AMD board that is the equivilent to the GA-Z77X-UD3H do you? Or the G1-Sniper M3?
 

http://www.techspot.com/community/topics/which-of-these-cpus-is-best-for-3d-software-redndering-2500k-or-1100t.180409/
Relevancy 27.09%

Will disabling an integrated webcam in device manager make it impossible for viruses to access your webcam and exploit it?

Specs:
HP laptop
Integrated Laptop webcam
i5
Windows 7
 

A:Disabling an integrated webcam

If you disable the cam in Device Manager, the cam will remain turned off.
 

http://www.techspot.com/community/topics/disabling-an-integrated-webcam.180343/
Relevancy 21.93%

Hi all So the situation is thus we are looking into getting a new office NAS server? for server for our office currently all individual desktops and laptops and have been given a quote that has come in considerably higher than we d anticipated Part of this is due to the addition of a tape auto-loader as a backup device which is coming in at including tapes The benefits we ve been given for this are tapes being more robust especially if being take off NAS for office server? site and more secure than hard drives but I have a concern at how accessible the data is should we need to resort to accessing the backup This got me to thinking would a NAS device or multiple with hot-swappable drives used in a similar way provide the same functionality as the auto-loader but at a much cheaper cost And if so what would people recommend for this I am fairly well versed on consumer devices from the likes of Synology and we already have a Lacie NAS in the office for general file storage though it s not been that relaible but I have no experience with multiple bay hot-swappable models Is there a particular brand I should look at that offer more commercial devices or would a -bay Synology be fine Thanks in advance grinthumb nbsp

A:NAS for office server?

You are into the area of planning called "Business Continuation"; how do you continue
when there are different levels of failure?

Consider (list in order of difficulty):

drive or system fails
building becomes unusable (fire / floor/ storm)
city takes a tornado / hurricane hit
county / state looses power

In addition, tapes per se are frail media and for long term storage, need humidity and temp controlled storage - - and regardless, the magnetic info degrades and/or 'imprints' from one layer adjcent to another. We saw this with IBM and tapes stored at Iron Mountain.

Local backups (ie store onsite) work well for all variations of (1) and off-site storage
only delays the recovery time.

(2) will likely wipeout all local backups (tape or otherwise) and is why off-site is necessary.

(3+4) makes the point that off-site storage is viable ONLY when it is outside the area of the disaster.

IMO, tape is a dead media - - what a mess if you need to use a backup set and find that after mounting several tapes in a restore you find that the nTH tape is unreadable :OUCH:

a) you ask the right question; which NAS systems are most reliable?
Google for "review scsi nas with hotswap".

b) get a SCSI enclosure with several bays and implement Raid-1 (mirrored)
with auto-rebuild to avoid hard stopping the system while a new drive is brought online.

c) determine the degree of effort to recover 'lost data'. It is impractical to take
a drive offline every day, so what period can you tolerate between HD rotations?
(suggest one per week + one per month = 8 drive in rotation pool).
Then keep last weeks drive local and all else offsite.

my $0.02
 

http://www.techspot.com/community/topics/nas-for-office-server.178981/
Relevancy 21.5%

I've been trying to run a port forwarded minecraft server. i have port forwarded the port "25565" (the minecraft server's port) on a UDP and a TCP protocol. i use the private IPv4 address (192.168.***.***) and i give my friends my external IP address to connect with.

however, when it comes to connecting, they aren't able to get in the server whilst i can =/ I've looked at a port checker and whilst the server was up and it agrees that the port "25565" is open. yet my friends still cannot connect.

I've tried adding new inbound rules on my window's firewall. however i do have Norton 360 which has a firewall of it's own.

if anyone knows anything it'd be really appreciated. thanks.
 

A:Friends cannot connect to my Minecraft server

you have norton firewall and a windows firewall, try turning them both off and see if it works, then turn on each one and see which is the problem.

I bet its norton..

my son runs a a minecraft server and he has no issues on his W7 PC after i set the portforwarding on the home router
 

http://www.techspot.com/community/topics/friends-cannot-connect-to-my-minecraft-server.179100/
Relevancy 20.21%

Hello dear brothers,
iam very sad and unhappy also iam in tention plz help me '
suddenly have formated my partion .
And there was alot of my editing and recovery and other alot of softwares was in it now my partition is empty and i want to recover my all softwares i tried alot but softwares not recovering plz brothers help me plz help me iam very worry because i want to recover my all softwares
plz urgent help me plz how to recover that all softwares help me hope u will help me.
 

A:Formatted partition and want to recover software

Take a look at this:
http://www.easeus.com/datarecoverywizard/recover-formatted-partition.htm
 

http://www.techspot.com/community/topics/formatted-partition-and-want-to-recover-software.178895/
Relevancy 21.93%

Hello,

I currenlty have a Dell 750 and need to find a new server w/ as much power but can also take a PCI 5.5 card.
 

A:Looking for a server that can take PCI 5.5 cards

What exactly is a PCI 5.5 card?
 

http://www.techspot.com/community/topics/looking-for-a-server-that-can-take-pci-5-5-cards.178072/
Relevancy 26.66%

hi everyone i m not after working reinstalling Webcam 7 Windows a newbie here desperately need some help regarding to this issue my Webcam not working after reinstalling Windows 7 laptop is ASUS A F I m using windows ultimate x before i re-install windows ultimate built in camera was working properly and now my webcam is nowhere to be found oh and ASUS hotkey utility also not working properly after i re-install it i ve been searching all over Webcam not working after reinstalling Windows 7 the web for the last days tried by uninstalling n installing the built-in camera driver but it s still not working i checked in device manager imaging devices properties in the general tab and it says something like this in the location info d and it says quot this device is working properly quot out of curiosity i also tried another cam plug-in usb webcam it s still work properly in my friend laptop and the result still the same nothing happened in my laptop the location info also says something like i mention above it s like my webcam is lost somewhere in my laptop I hv no idea why windows won t detect it can anyone help me i would really appreciate all your efforts hope i could get some clue of what happen and resolve this issue thank u nbsp

A:Webcam not working after reinstalling Windows 7

bokirey said:





i've been searching all over the web for the last 4 daysClick to expand...

Ever think to try the ASUS site?
http://www.asus.com/Notebooks/Versatile_Performance/A42F/#download

Please install all the latest drivers and report back.
 

http://www.techspot.com/community/topics/webcam-not-working-after-reinstalling-windows-7.177986/