Windows Support Forum

ASUS A7V Motherboard settings?

Q: ASUS A7V Motherboard settings?

Recently I upgraded to an ASUS A7V MB with an Athlon 850 chip. I selected "Jumper free" settings, and recently on bootup I have been getting a message sending me to the BIOS saying that my CPU Frequency settings are wrong. It has been set to "USer Define," CPU frequency 100 (It gives the option of setting it as high as 133, but I leave it at 100), and DRAM Freqency 133 (I have 256 MB of PC133).
The motherboard tech people only (wearily) say that this board "often does that." But it does it about every 3d or 4th boot.
I don't understand the multipliers, etc. Should the settings be changed? (I would have to change a jumper to "Jumper mode" to make any further changes.)
Thanks.

Relevancy 100%
Preferred Solution: ASUS A7V Motherboard settings?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 68.8%

Good day,

I was wondering what's the best setting/s for my bios using this board asus m3n78-vm, had it for a year and
only now that i'm asking.

i'm interested about the ecc setting also, everything's set to default, except sata mode to ahci

everything's working fine btw.

i have winxp pro, 4 gig memory, gts 250 palit video card, creative audigy 2 value sound card.
several sata drives.and samsung burner.
 

A:asus motherboard m3n78-vm proper bios settings

Usually the bios has two sets of defaults. One if failsafe and one is performance. I choose the performance one, but your best bet to find the best is by trial and error.
 

https://forums.techguy.org/threads/asus-motherboard-m3n78-vm-proper-bios-settings.962677/
Relevancy 68.8%

Hello all here is my problem Motherboard Settings boot A7N8X-X..wont Asus the for I am doing a MB swap with an ASUS A N X-X I installed an Athlon xp and mb of pc PNY memory I set the bios to recognize the Athlon and it does so nicely but when the boot routine gets to the loading of the OS windows XP Pro it freezes and reboots the entire system I tried to do a clean install but during set up it also freezes and gives me a blue screen which so far has produced different errors IRQL Motherboard Settings for the Asus A7N8X-X..wont boot NOT LESS OR EQUAL and BAD POOL HEADER which i sorta understand has something to do with irq or dma conflicts no anyway i took everything out of the computer except the HD the memory and the video card in an attempt to lessen the number of irq s the computer would use on boot up same thing then i tried disabling everything on the board in the bios usb serial ports parallel port audio lan still exact same thing is it a bad board has anyone else had this problem im at my wits end any advice would be greatly appreciated nbsp

A:Motherboard Settings for the Asus A7N8X-X..wont boot

Ive been having the same problem with the a7n8x just got it for christmas with a 2700+ ive troubleshooted to back and hell and done the same thing run a bare systems...only thing i hanve done is the fresh install which is what i was palnning on doing.....for me when the windows scren is going to load it does a quick blue screen and restarts...im at MY wits end also....could it be a compatibility with the mobo and hd or one of the other components? let me know so i can return this mobo and gt something else
 

http://www.techspot.com/community/topics/motherboard-settings-for-the-asus-a7n8x-x-wont-boot.18496/
Relevancy 67.51%

I have an issue with the SATA BIOS settings which have options for configure as IDE or set it to as AHCI So now I can only boot Vista when it is set to AHCI and only boot the XP when the BIOS SATA is set to configure as IDE and if not it gives a stop code error B And I did search for a ASUS P QL Pro motherboard BIOS update and I have the lattest version apparently AHCI BIOS Vista motherboard only can settings ASUS Solved: boot Also I did look in each one s Device Manager to check for driver updates such as for the serial ATA controllers So how can I boot both without changing the BIOS setting each time I dual boot with the Vista boot Solved: ASUS motherboard BIOS AHCI settings can only boot Vista manager and in my motherboard manual it does say quot Due to Intel chipset driver support regulation the AHCI mode is not supported in Windows XP environment and is only supported by Vista with OS built Solved: ASUS motherboard BIOS AHCI settings can only boot Vista in driver If I try to boot either XP or Vista without changing the SATA BIOS settings it gives stop code B nbsp

A:Solved: ASUS motherboard BIOS AHCI settings can only boot Vista

Fixed by changing the BIOS SATA configuration settings from that AHCI to IDE, enhanced. And then reinstalled Vista so that both XP and Vista use that same BIOS setting.
 

https://forums.techguy.org/threads/solved-asus-motherboard-bios-ahci-settings-can-only-boot-vista.824113/
Relevancy 55.9%

I am trying to reinstall xp sp Home edition on my older desk top computer as I wanted to upgrade the capacity of hard disk to GB and to eliminate various PC problems My old disk was only GB capacity Here are the specifications for my desk top Desktop is Mesh for which there is no support in the UK it ceased existing a long time ago in UK Mother Board Asus P R -VM Processor unit Intel Pentium chip IXP My old HD which I am replacing is PM - Maxtor Y PO GB capacity My new HD is Quickview Maxtor L PO GB capacity The installation reaches to the stage when it has to write the system files on to the hard disk and it fails The system BIOS recognises P4R800-VM Controller for Driver XP Re-installation Storage motherboard Mass Asus for motherboard the new disk as it is showing it as L PO in the BIOS I have gone through lots of forums and realise that mass storage device driver is not compatible with the new drive or is missing I have even tried to reinstall the system on to the old hard disk to see what happens but it still fails at the same place I do not have manufacturers disk of drivers for my desk top as it came only with recovery disk and no drivers disk I have found all the drivers chip set vga etc from Asus site but do Mass Storage Controller Driver for Asus motherboard P4R800-VM motherboard for XP Re-installation not know which driver is for mass storage Device there Or should it be from Intel site If so what the name would be Please help to get correct mass storage device driver on a floppy disk as I can only insert the driver in the installation process at RAID drivers insertion point I cannot clon old HD either as the drive is already formatted I was trying to reinstall the system first onto the old drive to correct the errors When that did not work I bought Quickview maxtor drive with higher capacity But still I cannot reinstall on the new drive I have an original XP SP Cd from another PC and I downloaded the installation programme on floppy disks from Microsoft site But even this combination does not install the system In this way the system tells me in the middle of the installation that the system cannot copy the file plugin ocx obviously this particular file is not available on the xp sp CD I have I don t know how to obtain it and from where In the end the system cann not copy the files on the hard drive and fails Sorry for the long post as I wanted to explain where I am at the moment in ths process Would be grateful for any advice in this matter nbsp

A:Mass Storage Controller Driver for Asus motherboard P4R800-VM motherboard for XP Re-installation

Almost a word for word copy & paste from THIS forum post made in 2014
@muckshifter the bus inspector should be along soon
 

http://www.pcreview.co.uk/threads/mass-storage-controller-driver-for-asus-motherboard-p4r800-vm-motherboard-for-xp-re-installation.4069314/
Relevancy 52.46%

I have bought Intel 630 Pentium 4 HT 2Mb L2 800MHz LGA775 prescott Processor, Kingstone 512 MB 400Mhz Ram, 40 Gb Seagate baracoda 7200RPM HDD, MSI 6600Gt NX6600Gt TD128E SLI pci-e. I have selected ASUS Motherboard P5RD1-V http://www.asus.com/prog/spec.asp?m=P5RD1-V&langs=01

I want to ask that does this mobo support EM64bit tecnology? Does this mobo support all my purchased items?

I have one more option
Buy ASUS P5RD1-V or Intel D915GAV ?
Intel Motherboard D915GAV http://www.intel.com/design/motherbd/av/index.htm

Does D915GAV support both EM64T and Enhanced Intel speedstep technology?
 

A:Does ASUS P5RD1-V support EM64T? Buy ASUS P5RD1-V OR Intel D915GAV Motherboard?

Hmmm?

I'm not too sure about mixing up the nVidia cards in sli with
the ATIŪRADEON XPRESS 200
ULIŪM1573
I would research this board further.

The IntelŪ Desktop Board D915GAV on the other hand
seems to have what you've asked for:
EM64bit and sli and the Enhanced Intel speedstep...
 

http://www.techspot.com/community/topics/does-asus-p5rd1-v-support-em64t-buy-asus-p5rd1-v-or-intel-d915gav-motherboard.32360/
Relevancy 48.59%

I have a ASUS M A Motherboard I now have motherboard help M3A Asus a BIG problem that I need some advice on Surrounding the white CPU AMD Athlon socket is a black support ring screwed into the motherboard that the CPU fan heat-sink attaches to The metal clips on the fan heat-sink fit on Asus M3A motherboard help small tabs on the edge of the black ring to hold it down The black ring is plastic And because of this one of the plastic quot tabs quot that the metal CPU fan heat-sink clips onto broke off Because of this I can t hook clip the heat-sink to this support Asus M3A motherboard help ring I am trying to use epoxy to glue the tab back on but do not know if this will hold I contacted ASUS and they said the MB is not in stock anymore Does anyone know if I can just replace this black support ring I really don t want to replace the motherboard All I need is the small black ring that supports the heat-sink fan over the CPU Would anyone have this board and does not need this part I am up the creak without a paddle guys Any help Scott nbsp

A:Asus M3A motherboard help

Never mind.. found one here:

Never mind.. found one here: http://www.heatsinkfactory.com/retention-hardware.html :grinthumb:wave:
 

http://www.techspot.com/community/topics/asus-m3a-motherboard-help.172728/
Relevancy 48.59%

I have a mesh pc withe above motherboard and running windows xp home. the pc crashed with a blue screen telling me it had shut down to prevent damage to my pc. i concluded that my problem was my hard drive so I bought a new one. while removing the old one I inadvertently pulled soma wires off the pins at the bottom rh side of the some next to the pc speaker connection. I have a green/white wire, the green is marked with a + and the white a - these are separate connectors. I cannot see where these should be connected. the other are two wires on one connector.orange and white, blue/white, and two grey wires. some have names where they should go but should they be connected horizontally or vertical.
Any help would be appreciated

Ian Matthews
 

A:asus a8n-e motherboard

ASUS_a8n-e Scroll to page 45, "System Panel Connector" I think that this is what your talking about.
 

https://forums.techguy.org/threads/asus-a8n-e-motherboard.572921/
Relevancy 48.59%

Hey guys help motherboard ASUS I built my computer and I ASUS motherboard help ve always had a little trouble with it but today it just stopped working I turn it on and the fans start and the lights come on and all that good stuff but nothing happens Normally a voice comes on and tells me that quot system failed VGA test quot or quot system failed memory test quot and then I go and check on those things Now when I start it up I don t get a voice and the computer just runs but nothing happens I ve tried taking out the RAM and starting it up because normally it will just shut itself off if there s no RAM but not anymore I ve taken out the video card the RAM the HD and all three at the same time but the computer keeps on running instead of just shutting itself off or giving me an error message I know I have an ASUS motherboard but I don t know the exact model I can probably find out if that helps So any ideas on what s wrong I d really rather not pay some guy to fix my year old computer Thanks a bunch nbsp

A:ASUS motherboard help

It could be a motherboard problem. If it has told you that it failed both a VGA test and a RAM test, you can assume that it is not those components at fault. Do you have another motherboard to test in it?

You might also try testing the power supply, but I doubt that is the culprit.

Lastly, welcome to TechSpot! :wave:
 

http://www.techspot.com/community/topics/asus-motherboard-help.71577/
Relevancy 48.59%

Hi everyone.Could anyone point me in the direction of a diagram of an Asus P4S800 motherboard as I need to reinstall front USB and powerbutton wires from front of computer box to circuit board.

Long story of how they became diconnected.

p.s we have mislaid our manual.

Thanks.
Darren.
 

A:Asus Motherboard help

Asus has a pretty good site, and these files are easy to find:
http://support.asus.com/download/download.aspx?modelname=P4S800&SLanguage=en-us
 

https://forums.techguy.org/threads/asus-motherboard-help.701868/
Relevancy 48.59%

I sent my ASUS P5LD2 motherboard to ASUS for repair. This is what they said was wrong "bios error due to image crashed, relashed the bios and unit checked out fine. Can anyone tell me what this means?
 

A:ASUS Motherboard

ReFlashed the bios.
They have updated the BIOS firmware on the computer


Here's ALL your drivers (unknown OS at the moment)
And here's the current BIOS
Version 1903
Support new CPUs.
File Size 433.28 (KBytes)

or

Version 1904 2008/01/07 update
Description P5LD2 Latest Beta BIOS
File Size 433.37 (KBytes)
 

http://www.techspot.com/community/topics/asus-motherboard.98299/
Relevancy 48.59%

ANYONE out there who has built a PC designed specifically for Home Media usage EG: movies, photos, etc ( not gaming) using a ASUS Intel motherboard 775, CPU E8400, P35, XP PRO, as I'm unsure which board might be the best all rounder.

thanks.
 

A:asus motherboard

Have you chosen the computer case you are going to use yet?

For a home media PC, the one defining factor is available "space". (meaning how large of a computer case are you going to use?)

A smaller case may limit you a Micro ATX or smaller MB, low-profile video/audio card or integrated video/audio, low profile CPU heatsink/fan, etc. A smaller case will also mean a lower power PSU which may also limit your choice of other parts.
 

https://forums.techguy.org/threads/asus-motherboard.759096/
Relevancy 48.59%

Hi, I happened to have an old motherboard lying around, so I decided to make a computer out of it. The problem that arose was that I attached a 12v molex connector to two wires with another connector which leads to these pins that usually you would attach the case power and HDD Light and Power Light. When I did this I booted up and the board would not start. I know I did something wrong, that I fed it 12v, and possibly might have fired it. Any clue to how I could get it running again???

Here is the .pdf for the motherboard manual http://www.solorb.com/gsale/p2bf-103.pdf
 

http://www.techspot.com/community/topics/asus-p2b-f-motherboard.66520/
Relevancy 48.59%

Hey First of all I would like to thank brindle for your help with the first problem I had I dl d the everest program and it worked great gave me all the info I was needing And help Getting my asus with motherboard I Getting help with my asus motherboard didn t know how to post the message to the thread here for others to see I m still a newbie to this forum thread thing and still trying to learn how to use Getting help with my asus motherboard it So please be patient with me Ok here is my situation I have found I have the asus P L -S motherboard With a Pentium II processor and LX AGPset I have all the specs I needed to get help but the asus website is not helping me I got this computer from a yard sale don t laugh its newer then the one I had And it was built by someone not a company I didn t get any manuals or install cds for the motherboard and graphics card and that is what I am needing in order to fix the bios and scsi things going on with this And I don t know what a socket is in reference to I see some of you know what it is and how to figure out what the number is for motherboards If I knew that maybe I could dl the bios and stuff I am needing to get the motherboard set up right any suggestions will be greatly appreciated nbsp

Relevancy 48.59%

Hopeing someone can help
Built my first box with above motherboard and found supplied cd not compatible with vista business 32bit. Searched ASUS website. Found that they have a listing for Vista. Dowloaded and installed. Everything working except for "device driver not installed" for simple PCI controller. Searched for more drivers but can't find one. Anyone else had same problem or can anyone suggest a solution. When I try to update the driver, vista cannot find a driver on the web, installation cd, or the folder that I have downloaded the new software too!!

Thanks
 

Relevancy 48.59%

Which is better Asus P4B-266, P4B-266-C, P4B-266-E, P4B-266-M, or P4B-266-SE? Which one has the most features?
 

A:Asus Motherboard

best I can do is link you to a review, seems they liked it
http://firingsquad.gamers.com/hardware/p4b266/default.asp
 

https://forums.techguy.org/threads/asus-motherboard.72566/
Relevancy 48.59%

i just bought this motherboard from a a friend of mine, he does not remember when took the board out, what the sequence of the power led, power sw, reset sw, and the speaker leads went. this k7m is not the same like the others. everthing is different. what can i do. i need a little help if someone can help thank you.
 

Relevancy 48.59%

Hi Hoping you can help Bios Info Version Pentium R Duo Core CPU E s GHz Motherboard ASUS P Q SE Samsung SATA Madel HD LJ g I kept receiving Activation PopUps and MicroSoft set me up with a custom reload when no activation numbers showed Having the OldWindows ASUS P5Q SE Motherboard before and not liking the set up I decided to wipe the Sata and start fresh Spotmau is a program that I have used many times when I would like a harddrive cleaned -always thinking that a cleaned disc would be better than just writing over the top of the old Thing is I ve only ever used Spotmau in XP with No problems - Not Vista I used an old computer Motherboard ASUS P5Q SE just freshly loaded with XP and wiped the data and formatted the drive Not only did it wipe the hard drive but when I went to load Vista I found No Bios Receiving one long beep and short beeps I clearded the COSMOS and the Bios returned But when I went to load Vista it looks like the Drivers for SATA have been wiped as well I changed the Bios Boot loading around - cd drives - SATA Hardrive - No difference The message that I received - I did not write it down - but it mentioned No SATA Drives and asked for a floppy I have the floppy BUT no floppy drive I tried the mother board disc with No success I downloaded the SATA drives from the internet but when trying to reload Vista it doesn t seem to register them Thinking that the drives would be on the MoBo disc seems to say that it s not the SATA drives it relly wants The message I m receiving now when trying to load Visata is quot Windows cannot be installed to the hard disk space The partion contains one or more dynamic volumes that are not supported for installation quot I formatted the disc again - just incase - No luck When starting with just the Motherboard disc I receive the message quot Welcome to ASUS Motherboard Make A Disc Fort DOS Menu That s ALL I get from the MoBo disc And when trying to load The Vista OS I get to just after adding my activation code for the th time and it asks for the drivers Go through all the drivers on the disc as well as the MoBo disc and try the downloaded sata drives ALL again and the only message I get is quot Windows cannot be installed to the hard disk space The partion contains one or more dynamic volumes that are not supported for installation quot Any ideas I m just about pulling my hair out Hope to hera from you soon Thanks heaps Louise nbsp

A:Motherboard ASUS P5Q SE

OK.... So I found out that it's the motherboard... I tried a IDE harddrive with XP and.... NOTHING !! AARRGG !!

Goes through the BIOS fine... then just a blank screen...

I tried the XP disc... nothing

I tried a bootable disc... nothing

Just a blank black screen with a cursor flashing up top....

Can anyone help?

Do you think it's salvageable???

Louise
 

http://www.techspot.com/community/topics/motherboard-asus-p5q-se.142017/
Relevancy 48.59%

What's the BEST ASUS motherboard available for P4 3.4Ghz?

I've been looking at the Asus P4C800 Deluxe; it allows RAID to be used so that's a definite plus.

Thanks guys,

Hamster.
 

A:BEST ASUS Motherboard

the P4C800 is a nice board, i would get this if i were building an intel system, but im an amd guy so its all about the A7N8X-E for me. get the P4C800, its will be top end for a while, but its costly. if money is the problem, find a board with the i865PE chipset or equivalent. the IT7-MAX3 is an abit board that is also high end. i think its the IT7, but its the only MAX3 board abit has, take a looksie, because asus board tend to be more expensive, so shop around.
 

http://www.techspot.com/community/topics/best-asus-motherboard.12116/
Relevancy 48.59%

I am trying to find out where the power switch wire , speaker wire, reset wire from the case connect to the ASUS 450/2 mhz motherboard. It may be a ASUS 800mhz motherboard--not sure--can not power it up--LOL. I am trying to build a computer from all my spare parts for a friend of mines little 5 year old to play his games on. There is a 20 pin (2 rows of 10) and behind it an row of 7 pins in the upper left corner of motherboard if the power supply connection is at the bottom of the board. The only markings on the motherboard is the name ASUS PSA
 

A:ASUS 450/2 motherboard

try http://www.elhvb.com/mobokive/archive/Asus/sock7/ali/p5a/p5a-106.pdf
will be similiar hopefully
 

https://forums.techguy.org/threads/asus-450-2-motherboard.962129/
Relevancy 48.59%

hi, my partner has a m2ns/nvm/s motherboard and for some reason has lost the disk... obviously he didnt tell me this before formatting, i was wondering if anybody knew where to download the drivers for it, i have tried several myself, but they arnt correct, thanks.

mobo: m2ns/nvm/s (he needs, all the drivers)
 

A:asus motherboard

Asus support site?

http://support.asus.com/download/download.aspx?SLanguage=en-us
 

https://forums.techguy.org/threads/asus-motherboard.831589/
Relevancy 48.59%

My original Asus P5ND2-SLI Deluxe doesn't work anymore so I have to replace it. From the beginning I always had issues with the POST and would have to restart from the back of the computer. I'm looking for another MOBO that supports Intel Pentium 4 EE. Looking at other ASUS motherboards I read the same issues with booting. I'm obviously not alone with the previous problems. Does anyone have any other suggestions for good boards that are just solid and consistent? There seems to be a decent ABIT one. I guess I don't want to spend $200 or more on something that's going to give me the same problems. Any help would be greatly appreciated. Thanks.
 

A:Asus Motherboard

I think the Asus boards arent completely solid until you buy p5n32 or better, if you pay 100 or so for a board of course not as good quality is put into it. I have the p5n32 sli premium. Its a champ.
 

http://www.techspot.com/community/topics/asus-motherboard.71792/
Relevancy 48.59%

Hi,
Can anyone tell me whether the ASUS motherboard P4GL-MX based on Intel 845 GL chipset support Intel Celeron 1.7 GHz?

The company's web-page http://www.asus.com/prog/spec.asp?m=P4BGL-MX&langs=01
talks only about it supporting the Intel Pentium 4 with 256/512 KB L2 cache so i wondered whether it would support a Celeron with 128 KB L2 cache.

Thank you.
 

A:Regarding an ASUS motherboard

Yippers, it does support it.

http://www.asus.com.tw/support/cpusupport/cpusupport.aspx
 

https://forums.techguy.org/threads/regarding-an-asus-motherboard.159285/
Relevancy 48.59%

I just installed the ASUS board.
I'm getting an "i" in device manager for:
1) Ethernet Controller
2) PCI Simple Communications Controller
3) Unknown device

I have the DVD, but NOT sure where or if the drivers reside on this disk as No
Table of Contents is provides only directories with "obsure" names.
Windows Update cannot find a driver for the above.

Any help appreciated.

A:ASUS Motherboard H97 Plus

Hi Drivers are in the Link below ...
Motherboard - H97-PLUS - ASUS

Install the Lan Driver and the Chipset

http://www.sevenforums.com/drivers/354738-asus-motherboard-h97-plus.html
Relevancy 48.59%

Does anyone use the Asus P3C-E motherboard? Good, Bad, Other
wise? Need your comments, please Thanks
 

A:Asus Motherboard

There are plenty of reviews out there....Look it up on google.
 

https://forums.techguy.org/threads/asus-motherboard.62057/
Relevancy 48.59%

how many vga on board asus p5gl-mx, p5s800 sis 661
plz answer emergently!
 

A:MOTHERBOARD asus

Why don't you look for yourself ?
Asus p5gl-mx
Asus p5s800
 

http://www.techspot.com/community/topics/motherboard-asus.43006/
Relevancy 48.59%

I recently bought an Asus A V-VM SE Motherboard It arrived today I quickly installed it into my case inserted the new AMD Athlon X dual core processor and heat sink I connected the cases wires for power button reset button HD LED PWR LED and Speaker to the motherboard I wanted to do a quick test the reason I got the new motherboard was because my old one died or at least I m hoping it did I plugged in the power cable to the PSU The green light of happiness turned on on my mobo So far so good I hit the Power button on my Case and nothing happens nothing at all I ve double checked to make sure the wiring is correct it is I ve swapped reset button with power button just in case Still didn t work I even wondered if the motherboard was too clever So I installed everything else into the motherboard RAM GPU all other cables etc Still Nothing Also got out my old PSU still workng and tried that The green light on the motherboard came on but still nothing worked through use of the power button Should I presume this motherboard is DOA or is there anything else someone might want to suggest that could help I ve tried to please. Asus DOA? Help Motherboard be as detailed as possible And any suggestions are welcome Thank You in advance nbsp

A:Asus Motherboard DOA? Help please.

What size is your power supply? You may just need a 450-500 watt power supply.
 

http://www.techspot.com/community/topics/asus-motherboard-doa-help-please.73627/
Relevancy 48.59%

is there a better..

motherboard rather than asus? just curious...
 

A:is there a better motherboard than asus?

It's all a matter of opinion, there is no "better" motherboard. One company's board has several great features and other less great features, missing features etc that other companys board might make up for but yet have it's own flaws also.

You just have to figure out which board has the features that you need and can take advantage of for, also considering the price, compatibility, etc.
 

http://www.techspot.com/community/topics/is-there-a-better-motherboard-than-asus.8852/
Relevancy 48.59%

i m using ASUS P4V533-MX motherboard.i want to know that is there hotkey on the startup(starting computer) to select the hard drives to boot the operating systems, without entering in the bios settings.
like i had intel D84GEBV2 motherboard and i used F10 key to access the option to boot form the available drives.
 

A:Help Regarding ASUS(motherboard)

F8 is what I think you are looking for.
 

https://forums.techguy.org/threads/help-regarding-asus-motherboard.334361/
Relevancy 48.59%

Hi, I have a ASUS A8N-SLI Deluxe and i was wondering if a 20 pin PSU will be ok for it. For now it has an Athlon 64 3700+ 1MB L2 Cache and san diego core, 512 kingston PC3200 and a 2D 8mb PCI Matrox Mystique.

I just need it to run until I get a 24Pin PSU in about a month
 

Relevancy 48.59%

I have a asus motherboard and am having some problems.
Does ASUS have a tech help department?
I have sent numerous e-mails to [email protected] with no reply.
I can not find a phone number for the USA either.
 

Relevancy 48.59%

Put in new Asus motherboard with Athlon Xp processor The hard drive I have was already loaded with Windows XP and worked perfectly with old motherboard and processor The new system Asus in new Put motherboard will not recognize the hard drive It will see it in Put in new Asus motherboard cmos but will not allow access to it Even if I try to boot from Windows XP cd it will go only as far as it begins to copy to hard drive and then it freezes up When I try to boot from the hard drive the system tries and then simply reboots comes up to the screen where it wants you to choose whether to start windows normally or safe mode Whatever option is chosen it tries and then automatically reboots back to the same screen What am I missing HW System Type Desktop Tower Operating System Windows XP Processor Type AMD Ammount of RAM MB Hard Drive Capacity GB Video Card Manufacturer ATI Internet Connection Speed k Monitor Size quot Printer Manufacturer Cannon Printer Type Ink Jet CD-ROM x Scanner Network Card Mbps nbsp

Relevancy 48.59%

I just purchased a new asus p4t motherboard and P4 1.4 GHz cpu. i just can't figrue out how to set the clock and multiplier dip switches. asus is no help. the cpu says 400 MHz FSB, but i really don't know what that means

i can choose from 100 to 150 on core speed and multi form 6.0 to 18.0. should i chose 100 with a 14 multiplier to get my 1.4 GHz?

Please Help with settings.

bill
 

A:asus P4T motherboard

100 x 14 is default
 

https://forums.techguy.org/threads/asus-p4t-motherboard.45623/
Relevancy 48.59%

hey guys, i just re-installed Windows XP SP3 on this machine running the A8N-E and i can't find the LAN driver or the general drivers anywhere. i came across this: http://support.asus.com/download/download.aspx?SLanguage=en-us but it doesn't have the full drivers or anything for the LAN to work.

i know there are sites out there that have the drivers, but these seem dodgy or illegimate with viruses. are there decent sites out there?

thanks
 

A:ASUS A8N-E Motherboard

http://www.asus.com/product.aspx?P_ID=DzbA8hgqchMBOVRz&templete=2
 

https://forums.techguy.org/threads/asus-a8n-e-motherboard.936752/
Relevancy 48.59%

Recently I purchased a Asus H-81 gamer and married it to 2x4 gb Cosair modules, a Celeron G1840 processor and a Seagate 500 gb SATA III Hdd and when Itried to load the XP system the computer said that the HDD was corrupted. what am I doing wrong, and how do I fix it??
 

https://forums.techguy.org/threads/asus-motherboard.1158299/
Relevancy 48.59%

I have read the book with it and still am not sure. I have it in jumperfree mode. Do I set it up in BIOS Setup? Right now it shows cpu mhz 100. I have a 700mhz processor and use 128mb pc133 sdram. The book shows this setting of 100 to be standard. Shouldn't it be a faster setting than this?

Also, the book states that the processor has locked Frequency Multiplies so that is why the settings are not listed.

BarbCW
 

Relevancy 48.16%

My new mobo and its accompanying DVD were working fine with one exception; 2 older cd's (on IDE cable and connector) from my previous computer; which held my dearest programs, were now non- existant. The ASUS cd hinted that another boot program might be the answer. Having been away from computers for 10 years I stupidly embarked on this quest. The result: no boot. Can anyone suggest a cure or a cd (preferably not ASUS), or anything which will help me?
Thank you !
 

https://forums.techguy.org/threads/asus-p5n73-am-motherboard.816126/
Relevancy 48.16%

Asus K8V AMD Athlon 64
Seagate 200GB HD
2 - 512mb PC3200DDR
400 watt ATX Power Supplly
Windows XP

I tried to update the bios using ASUS EZ Flash update, followed user manual to download update to floppy, it read floppy, started erasing, and then failed to flash, then it did nothing. I tried to recover the bios using crashfree bios 2, i inserted my motherboard cd nothing happens, my monitor has no power from motherboard, screen is black. Can anyone help me i am a newbie, probably should not have done this.
 

A:Asus K8V Motherboard Dead

Hello and welcome to Techspot.

As far as I am aware there are only two possible solutions to your problem.

1 Ask the manufacturer of your mobo if they would be willing to supply you with a new bios chip.

2 Get a new mobo.

I`m sorry that I can`t give you any good news but there it is.

Regards and good luck Howard
 

http://www.techspot.com/community/topics/asus-k8v-motherboard-dead.17284/
Relevancy 48.16%

Hey everyone,
I need to determine what my motherboard is ASAP. I'll give you everything I know about it, but I've been searching the web and haven't been able to find anything...

ASUS Brand, it came in a HP Pavilion
Pentium 4 (Not sure what slot)
4 DDR RAM Slots
1 PCI-E x16 Slot
3 PCI Slots
Orange/Yellow in colour.
RAM Slots are Blue, Red, Blue, Red

The reason I need to know is I have no idea how to configure my System Panel Connectors, as I am trying to fit the board into a new case.

Thank you in advance for your help,
Skutty.
 

A:Need to determine my ASUS motherboard

when did u buy it?
actually heres a better way of finding out..
http://www.majorgeeks.com/download4181.html

download the little tool and u can find out a whole bunch about ur system.. mobo type, cpu type, ram, temperatures, etc...
 

http://www.techspot.com/community/topics/need-to-determine-my-asus-motherboard.40007/
Relevancy 48.16%

hello there with my new mother boardeverything is good. The green light on the MoBo lights up and all. But when i push the power button, nothing. SOMETIMES it turn on, but it doesnt boot into bios, it just spins thefan on my volcano 9. i can stillopen the CD drive and all, but thats it

can anyone help..i read somwere else that about connecting risors? what wo9uld that be exactly...woud that be setting up the power button to turn ont he power onthe computer.???
thains alot
 

A:asus a7v333 motherboard help

You have connected the case power button up? There is a block on the bottom of the motherboard (at the end where the motherboard light is). Here are conectors for the power switch, reset switch IDE on off light and PC speaker. Make sure they are connected to by the various devices and the cables from your case.
 

https://forums.techguy.org/threads/asus-a7v333-motherboard-help.194640/
Relevancy 48.16%

I have a Asus P8Z68-V LE Motherboard and would like to upgrade the processor, what is the fastest processor that would fit this board?

Cheers
 

Relevancy 48.16%

IVE GOT THE MOTHERBOARD FITTED BUT I DONT KNOW WERE THE CABLES GO THAT COME FROM THE FRONT OF THE PC IVE LOOKED AT THE MANUAL BUT STILL DONT KNOW WHERE THEY GO

SPK - Speaker - Small speaker mounted in the PC Case
PWR SW - Power switch - System power on/off
RST SW - Reset switch - Reset system
PWR LED - Power LED - Light shows when system is on (usually green)
HDD LED - HDD LED - Light shows when system is accessing HDD (usually red)
SLP LED - Sleep LED - Light shows when system is suspended (in 'sleep' mode)

can any body helP
 

A:HELP asus A7V266-E/AA motherboard

Do you have the PDF manual from the ASUS website?
If get it here: http://dlsvr01.asus.com/pub/ASUS/mb/socka/kt266a/a7v266-e/a7v266e-100.pdf
On page 43 it shows the location of the connection. Polarity of the switches doesn't matter but for the LED's it does; white wires are "-". All the connections should be straight forward except for the SLP which goes to the SMI connection, and the keyboard connection would not be used.

If you have front audio ports here's how to connect them: http://support.asus.com/faq/faq.aspx?SLanguage=en-us&model=A7V266-E/AA
 

https://forums.techguy.org/threads/help-asus-a7v266-e-aa-motherboard.544374/
Relevancy 48.16%

Hi everyone.
I have ASUSTek Computer INC. K8V-XE motherboard and I am considering buying a new hard drive. I wonder if a SATA II drive would be compatible with such motherboard?
Thank you for helping : )

Sorry for the silly mistake in the heading
 

A:Queston about ASUS K8V-XE motherboard

Yes. Here is the spec page.
http://asus.com/product.aspx?P_ID=qhs3pLIVcQE9Z91s&templete=2
 

https://forums.techguy.org/threads/queston-about-asus-k8v-xe-motherboard.887590/
Relevancy 48.16%

I have an ASUS P5K SE motherboard that has suddenly lost the onboard audio. I re-installed the drivers and even did a clean install but I still have no audio.
 

Relevancy 48.16%

I have an Asus P5QL VM DO montherboard in my homemade PC. This is an older system that I use for testing, so I put my Windows 8 install on it. Unfortunately, the Asus driver installation CD will not run in Win 8, and I am missing one driver which I am unable to locate anywhere. It is for the PCI Simpe Communications Controller.

A:Asus Motherboard Drivers CD won't run

Note after searching this forum I found that I could download the driver for the Intel Management Engine Interface for my mobo from Asus. I used the Win 7 64 version.

http://www.eightforums.com/installation-setup/19403-asus-motherboard-drivers-cd-wont-run.html
Relevancy 48.16%

I recently bought an Asus K V-MX Motherboard to replace an old emachine board that fried Its a with a sempron When I first started it I got a splash screen from asus for a few seconds then a restart splash screen restart splash screen restart Then I got nothing Both IDE and CPU lights stay on amp nothing happens no video Customer service told me to reset problems! New Motherboard Asus the CMOS by taking the battery out moving New Asus Motherboard problems! the reset jumper for a few New Asus Motherboard problems! seconds then putting everything back OK I got a splash screen again only twice then the same power on freeze with no New Asus Motherboard problems! video Once again I call customer service amp they asked me what kind of power supply I was running The stock emachines supply was so they said the board had a W recommendation SO NOW I have a new ATX W CPU and tranferred everything over Still get nothing no video just powers up the boards little l e d light Resetting the CMOS doesn t work anymore the DDR is secure all cables are secure Has anyone ran into this problem I would call them again but they will be closed til tomorrow around noon I want this baby running by tonight All the inside components are new and compatible with each other I need it to start up so I could put an OS on it When it powers up I get no access to the CD ROM drive its like it freezes Is there anything I should be resseting besides the CMOS PLEASE HELP nbsp

Relevancy 48.16%

Reusing old CPU on ASUS A8N-VM Motherboard

I have an ASUS A8N-VM Motherboard that I want to install on a new computer with an old
an old AMD Athlon XP 2800+. I also bought an AMD 3000+ Socket 939. So I have a few questions.

Can I use the 2800+ instead and return the 3000+? Can I buy a socket 939 adapter if I need it for the 2800+. is the 2800+ an AMD64 also? If I reuse the 2800+ how would I wipe off the old thermal paste to apply the new one? Would the Vantec thermal paste I have left over work fine? Are there any guides on installing old CPUs I can use as a reference?

Thanks
 

Relevancy 48.16%

Okay I have a Asus P LD Deluxe Wifi-TV Socket Motherboard Intel Pentium D Ghz FSB Socket Corsair XMS TWINX MB PC DDR MHz X XFX GeForce GS MB PCIe w Dual DVI And Asus Motherboard issues. an Ultra Grid MID ATX Case with a w mod PSU my problem is ha it will boot w all LEDs no beeps running Hd and fans but no monitor and then it will turn it self off Im wondering if the memory I have is not compatible I dont know why cos it Asus Motherboard issues. s mhz DDR DualChannel that the mobo specs Asus Motherboard issues. said it would support I know times out of ten the motherboards just shorting out on the case but I dont think thats the prob but had one question if the cpu fan is not plugged into the mobo could this cause an error cos I have a test fan setup that I use that is not hooked into the mobo for easy access when overclocking and checking heat ratio but is that what s causing it to turn it self off help would be greatly appreciated nbsp

A:Asus Motherboard issues.

Do this right away.Install asus Probe.It's on the cd or a download.
Did you install the cd extras.You need the AGP installed.
I hope you have a cd and a manual,or dl one.
 

http://www.techspot.com/community/topics/asus-motherboard-issues.68368/
Relevancy 48.16%

Hi, Im new here but I was needing some information regarding motherboard drivers from asus. I recently reloaded my computer and then relised i didnt have asus drivers for me computer on a disc, so I need to find which ones I need. My question is how do I find out which motherboard I have? Will Everreal detect the Motherboard even if I dont have the drivers installed on my computer. Also, If it does wil it just detect a motherboard or will it actually tell me which one it is? I dont see how it could without drivers on the computer but maybe you could clarify better for me.
 

A:Asus Motherboard drivers

The mother ID is embossed on the motherboard. Go to the ASUS site, and post that ID for the motherboard. Then you will be given access to a site where you can download the Chipset, and other drivers ASUS lists.
 

http://www.techspot.com/community/topics/asus-motherboard-drivers.149165/
Relevancy 48.16%

I just want to know if my motherboard will support PCI-E video cards. I currently have an Nvidia 7800GS so I know it supports AGP X8, but I want know so that I'll know if I have to buy a new motherboard when I buy a new video card.
 

A:ASUS P4SD-VL motherboard

if the motherboard has AGP ... then it doesnīt have PCI-E ...
AGP is being replaced by PCI-E .......

cheers
 

http://www.techspot.com/community/topics/asus-p4sd-vl-motherboard.50262/
Relevancy 48.16%

Hello,i just got asus P5RD1-V motherboard.I connected all wires to the motherboard and the green light (SB_PWR1) on the motherboard does not shine.And i ,cant power up my motherboard.If no power on the motherboard there is no light(SB_PWR1),right ? But my mouse in usb on that motherboard lights up.PSU i am using with this motherboard is working on other motherboards.

Please help,I really appreciate it!
 

A:Asus motherboard is not working

did you read the manual before plugging anything into it, have you made sure you have set all the jumpers correctly (if there are any)
 

http://www.techspot.com/community/topics/asus-motherboard-is-not-working.151548/
Relevancy 48.16%

Hi all,

Any idea what's the best value RAM for the above board?

It's been a while and a recent game seems to have boned my RAM (or just pointed out the fact it was already boned)

Memtests are failing and the game in question keeps BSOD'ing and crashing to desktop. All was fine before this game... It's an anagram of Fattlebield 3.

I'm thinking 16gig might be required, but I'd like to be sure it's compatible before I purchase.

Thanks,

Jib.

A:Best RAM for Asus Motherboard P7P55D

8-12gb max! i can play bf3 fully maxed out with 8gb.

I use vorsair vengence 1866mhz ram.

to check out compatibility check out http://www.crucial.com/index.aspx

http://www.sevenforums.com/hardware-devices/194847-best-ram-asus-motherboard-p7p55d.html
Relevancy 48.16%

Hi guysI have fresh installed windows 7 Ultimate 64 bit on my pc which now also have a Ssd hdd being the vertex 2-128 g and the asus p5pkl motherboard
Although I have tried, I could not find the achi setting in the bios so continued with the installation. Afterwards I could see that trim was enabled (by following the command promp)
I'm stil unable to trace the setting and searched the web, but cannot get an answer if achi is indeed enabled and working on my system
Hope someone here can help me with an answer?

A:Ssd hdd with asus p5pkl-am pe motherboard

It seems like you misspelled the motherboard. It's a p5kpl correct? There are many versions of that motherboard. Is it just a regular p5kpl?

http://www.sevenforums.com/hardware-devices/237279-ssd-hdd-asus-p5pkl-am-pe-motherboard.html
Relevancy 48.16%

Hey guys I'm new here and I've been having a lot of trouble with my ASUS M A TD-V EVO motherboard It's rated to be compatible with Gbs of RAM but the last two sets I've purchased from newegg haven't worked at all I tried mixing old RAM with new and it still won't work It only works if I use my old RAM RAM that works Crucial GB x GB -Pin DDR SDRAM DDR PC First attempt at GBs G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR PC Second attempt Kingston GB x GB -Pin DDR SDRAM DDR PC Only the original Crucial memory works When i tried the other two nothing would show on the screen Any help here would be awesome and much appreciated EDIT I tried GBs RAM on working 16 motherboard not ASUS of googling for help and found a forum post on here already on the same subject when my first attempt didn't work That's what pointed me to buy the Kingston RAM It was recommended by a user here and it still didn't work EDIT Problem has been solved I had to update the BIOS of the motherboard to fix the problem

A:16 GBs of RAM not working on ASUS motherboard

Hello Randomrocket. Welcome to the forum.

I assume you have already checked to be sure all RAM you are trying to use is the same specs as the current RAM, most importantly the voltage spec, but also unbuffered, and the timings should be the same or very close.

That said, the first thing you need to determine is whether it is a bad stick of RAM or a bad RAM socket or a power problem.

The first thing to do is remove the old working RAM and add one stick of new RAM into the first blue slot (A1) and test. Test each new stick in A1.

If that works then install the 2 new sticks in the same locations as the old sticks (the 2 blue slots - A1&B1) and test.

Then, with the two new sticks still in A1 & B1, add one stick of the old RAM into the third slot (black - A2) and test. Then the second old stick in the last slot (black - B2).

Report back what you find.

http://www.sevenforums.com/hardware-devices/198038-16-gbs-ram-not-working-asus-motherboard.html
Relevancy 48.16%

I am looking at motherboards to build a new desktop system. I am looking at the
Asus P5QC Motherboard on ebay to check out the price range. I have noticed that
some sellers have some good combo deals on with these boards. Usually their
deals come with Windows 7 and Quad core processors. It is something to
look at but maybe there is an alternative.
Maybe I should look at alternative boards. Is there any other good mother boards
that I should look at? Is there any other venders I should look at for the best
deals?
I am looking for an good dependable, somewhat up to date board but not
the latest and greatest.

Thank you,
 

Relevancy 48.16%

The above is what I have. I now have the monitor hooked up to my graphics card. I thought I would engage integrated graphics and see if that was better. I have been through the bios several times and do not see an option to engage. If any of you have this motherboard, please guide me to the correct area. Thanks,

A:Asus P8Z68-V LX Motherboard

Did you check under system agent

Pg 2-19 in the manual. Use Initiate Graphics Adaptor for the selection. You will want to shut it down after saving and switch the cable to the iGPU port.

http://www.sevenforums.com/hardware-devices/249426-asus-p8z68-v-lx-motherboard.html
Relevancy 48.16%

Hi
I am trying to find a manual covering this Mobo.
Can anyone help please.
regards
phil
 

Relevancy 48.16%

I put together a new system with an Asus Z87-c Core i5 processor and new DDR3 memory. I used the hard drives and DVD drive from an old system (motherboard had died on that computer). The C drive has XP installed and was working fine in that old system.
As soon as xp starts to load I get a bsod with the following:
Stop : 0x0000007e ( 0xc0000005, 0xf75fe0bf , 0xf789e208 , 0xf789df08 )
pci.sys - address F75FE0BF base at F75F7000, Datestamp 3b7d855c

I get the same result if I try to reinstall XP from the CD

Other forums seem to say this must be a hardware problem, BUT I can load and run a version of linux perfectly ok.

I need Windows to use mapping software I use, I'm thinking I should get Win 7 to replace the old XP, do you think that will load and work ok?

Thanks!
 

A:XP won't load on new Asus Z87-c motherboard

I can tell you that if you take a hard drive out of one computer with Windows on it and then try to put that into a different computer, it will not work.

I found this thread here: http://answers.microsoft.com/en-us/...f78da208/08bac46d-55b5-472b-8bad-c0dc227359a8

Based on the error code, it seems that there could be a problem with the RAM. Step number 4 in the answer provides a link to Memtest to download and run on the computer. You should have a built in Memory test that you can access at boot from the advanced boot options screen. You will have to use an f key to get there. The f key differs, so you will have to try them and find out which one it is.

If it is a problem with the RAM, take it out and then put it back in, making sure it is fully seated.
 

https://forums.techguy.org/threads/xp-wont-load-on-new-asus-z87-c-motherboard.1112132/
Relevancy 48.16%

Hey, I'm pretty much clueless when it comes to compatibility, so I was wondering about a few things. First of all, I'm planning on buying an Asus - SK8N - nVIDIA nForce3 Socket 940 ATX Motherboard (http://usa.asus.com/products/mb/socket940/sk8n/overview.htm). I'm also planning on buying a new processor, memory, video card, and hard drive. Basically, I'm wondering if this motherboard will support two hard drives in a RAID 0 configuration, an Athlon 64 FX processor, and an ATI X800 XT graphics card. The 'board has an nVidia chipset, so does this mean that only nVidia graphics cards can be used? Like I said, I'm clueless..
 

Relevancy 48.16%

I was really bored the other night, started looking at Asus' Z77 offerings (again), and realized what a hassle it was to click on all those web pages to compare specs and features, seeing as they currently sell 17 different Z77 sku's, so I came up with this quick reference guide.
https://www.box.com/s/541f8a663a90ca20d356
Any mistakes or typos are entirely the fault of the author.
 

http://www.techspot.com/community/topics/asus-z77-motherboard-selector.182507/
Relevancy 48.16%

I have just replaced a motherboard and processor and am having a strange problem The system is now as follows ASUS motherboard problems ASUS A S -VM Duron MHz Mb SDRAM I have installed the above items but am having slight problems with it The operating system is Win When I switch off the computer throught quot Start quot and quot turn off computer quot the machine powers down OK except the keyboard still has power the cd-writer light stays on but dimly and the ASUS motherboard problems HD light is on but dimly Although the cd-writer light shows power the cd will not do anything else The LED on the mother board also stays lit When I come to power up there is no response from the machine If I disconnect the power to the computer and reconnect and then hit the power switch it powers up The light on the cd -writer goes off and the other lights act normally I have checked all the connections and the bios settings and all are set as default I have tried changing the psu but with no improvement Have you any suggestions as to the cause of the problem I am at a loss Thanx in advance nbsp

A:ASUS motherboard problems

Please provide more info ...

What did you have before, when your system was working?
Is your case and psu atx compliant?
Does your system work properly when you have successfully booted to windows 98?
Provide as much info as possible, as right now there are just too many variables to draw any reasonable conclusions.

One last thing, if you have made such a significant change to your hardware, then I would hope that you also reinstalled win98 and all your software. Its not a good idea to just use your existing installation.
 

http://www.techspot.com/community/topics/asus-motherboard-problems.4550/
Relevancy 48.16%

Buying a new motherboard from Asus might be a gamble at least with the P P D-E model Asus website list the motherboards' features at their web site ASUSTeK Computer Inc Here are some of the features Marvell SATA Gb s controller - x SATA Gb s ports gray NEC USB controller - x USB ports blue at back panel Expansion Slots - x PCIe x single at x On the surface it does sound good but once the board is fired up the above selected features are either on or off depending on the settings This is selectable deep in the BIOS under the quot IO Levelup quot function that have the following options Disabled USB SATA G motherboard... Asus P7P55D-E There's no USB and SATA G option and this is how each options work Disabled PCIe slot- x USB ports reduced to USB speed SATA G or SATA reduced to SATA USB PCIe slot- reduced to x USB ports are USB SATA G or SATA reduced to SATA SATA G PCIe slot- reduced to x USB reduced to USB speed SATA G or SATA is SATA Here's an image of the PCIe bus speed when the SATA G option has been selected iolevelup Asus jpg Isn't that lovely do I want x PCIe video card or speed up the Asus P7P55D-E motherboard... new SATA SSD drive While I am aware that I should've researched this motherboard more than I've done however it is also a false advertisement that Asus does at their website Just to put it mildly I am Asus P7P55D-E motherboard... also aware that there isn't much I can do at this point other than raise the issue of this type of marketing And just maybe some people reading this can learn from it

A:Asus P7P55D-E motherboard...

I had an Asus board several years ago that I had similar issues with. I never did like the board. However, it turned out to be a killer gaming board, which made my son very happy since he ended up with it.

Hard to say whether I'd want another one or not.

http://www.sevenforums.com/hardware-devices/133911-asus-p7p55d-e-motherboard.html
Relevancy 48.16%

Has anyone out there used the Asus P5G43T-M PRO motherboard and if so, can you comment on it's OC'ing ability. A review on Newegg slams it as a very poor OC'er and not being able to go over a 350MHz clock. That's too fast anyway for my current chip (E6700) without a crash at stock Vcore, but I want room for growth if/when I upgrade in the future. Other than this potential gotcha, the board has everything I want (for my grandson's first build).

Thank in advance.
 

https://forums.techguy.org/threads/asus-p5g43t-m-pro-motherboard.903522/
Relevancy 48.16%

Hey guys I would like to upgrade my cpu and I was wondering what speed of for motherboard. asus Cpu speeds cpu s I can go to with my asus meb motherboard the specs on the motherboard are as follows ASUS MEB ACPI BIOS REVISION intel BX AGP set Now the motherboard manual Cpu speeds for asus motherboard. displays info for quot celeron cpu s quot for the motherboard only at Mhz and Mhz for some Cpu speeds for asus motherboard. reaon front side bus and multiplier of for a total of I would like to put a pentium cpu on the motherboard is this possible The manual states that the bus frequency goes up to Mhz and the multiplier goes up to That makes a processor speed of gig I want to aim for a gig pentium processor which is Mhz by or there abouts if you do the math i can potentialy get a cpu speed of gig that is x mhz but i dont wanna fry anything in the process Sent an email to asus but have yet to get any response any info would be appreciated greatly thanks nbsp

A:Cpu speeds for asus motherboard.

forget the 1.2 Ghz, the FSB's are asynchronous with the AGP and PCI (so you will overclock them massivly at fsb 150, and you don't want to do that knowing the PCI and AGP cards won't handle it).

The FSB 100 is possible and maybe some slight numbers above (up to 110 maybe).

I think a BX chipset can still handle a PIII 800 (and a lill' more if you up the FSB slightly).
 

http://www.techspot.com/community/topics/cpu-speeds-for-asus-motherboard.216/
Relevancy 48.16%

I have the above motherboard. I have been using a video card which is three years old and thought I would try out the integrated video before my video card died. I switched it in the Bios and switched the monitor cable and it started fine on integrated video. The only thing is that the first screen where I can enter Bios does not show, so I am unable to enter the Bios. I tried hitting the delete button on the blank screen but nothing happens. I was able to shut down the PC and switch back to the video card, so I am OK. Does anyone have any idea why the first screen doesn't show on integrated? Thanks,

A:Asus P8Z68-V LX Motherboard

Did you remove the video card?

http://www.sevenforums.com/hardware-devices/268241-asus-p8z68-v-lx-motherboard.html
Relevancy 48.16%

Hi A technician installed quot No IP quot software on our office computer so that we could access it when away from home Since then our computer A8V-DX Motherboard Asus dilemma kept crashing The tech said this was a coincidence as the program would not do that to the computer He thought maybe our HD was failing We ran a Maxtor utility but it could not find our HDDs It only detected the CDRom Asus A8V-DX Motherboard dilemma We brought our computer to the shop who ran some diagnostics and said that they thought that the motherboard was failing They told us it was no longer sold and that they would replace it with Gigabyte K NSC- I told them I only wanted Asus and this is where the dilemma begins They Asus A8V-DX Motherboard dilemma said they would have to return the board to Asus and we would probably have to wait two weeks to get it back As this is our only office computer this is not an option They said we could buy a new motherboard the A NE was suggested but we must then also buy a new video card - the ATIX was suggested They also said that we would have to reinstall everything even though it is backed up by Norton Ghost We only bought this in January and it Is still under warranty This motherboard was supposed to last a long long time - We don t want to go through the expense and time to reinstall everything I asked if we could borrow a compatible motherboard until the A V-DX one came back and they said they would try but could not guarantee that there would be no issues I would love to have feedback on this problem It is still working so we took it back home but a decision must be made soon Thanks Vivienne nbsp

Relevancy 48.16%

ok when i power up the mobo i don't get any video, no keyboard response when i hold down the power to shut it off it doesn't, I changed ram, processor, pulled out battery, tried new PSU, different monitor, removed graphic card, tried new graphic card.......i don't know what else to do need some help??? any suggestions ????
 

Relevancy 48.16%

my friend has just bought an asus m2v motherboard and gf 7300 gs graphics card.

problem is it wont boot with his card in , it will boot with my 7600 gt card ,
ive put his card in my system and it boots fine.

so there seems to be a problem between the m2v and 7300 gs anyone help ?

thanks teeva
 

Relevancy 48.16%

Hello! I have exactly the same problem as in this thread with the same setup: http://forums.techguy.org/hardware/457389-usb-over-current-status-detected.html

I want to roll back my bios version to 1015 but the EZ flash utility will not read from the floppy disk i only get "floppy disk not found error" altough I have renamed the file to A8V.ROM as it says in the manual. Does anyone have any sugesstions? I really need my computer:/
 

Relevancy 48.16%

Hi, Can I find somewhere ASUS P2B Motherboard's bip sequence? I have a booting error with this motherboard which I posted already before!!

regards
Tejas
 

A:ASUS P2B Motherboard Bip sequence

Find the beep-codes here:
http://www.bioscentral.com/beepcodes/awardbeep.htm
 

http://www.techspot.com/community/topics/asus-p2b-motherboard-bip-sequence.13793/
Relevancy 48.16%

I just got a Asus K8V SE Deluxe motherboard that I'm using with the recommended Kingmax 512 MB memory and an Athlon 64+ 3000+ processor. I can start it up if I reset the CMOS, but after that and adjusting settings in the BIOS it just goes black screen and shuts off shortly afterwards.

It says something about the VCore voltage being wrong. I really have no clue what I'm doing and am looking for the appropriate settings for the BIOS on this computer. Any help would be appreciated.

- Jeff
 

A:ASUS K8V Motherboard Problems

Really simple. When you're in BIOS, highligh "Load defaults...", press Enter. Save & exit.
 

http://www.techspot.com/community/topics/asus-k8v-motherboard-problems.18656/
Relevancy 48.16%

I have this board with an amd ATHLON 11 X3 455 . 8gb ddr3 ram .I thought it was kinda sluggish , so I tried to take advantage of 1 of its features ie. unlock the cores in the CPU . You hold down key 4 on boot up .However it booted up and on completing the boot up it showed that the cores were unlocked(a window came up saying so) a few seconds later and BSOD . I rebooted a couple of timed still the same so I reversed the procedure and is now ok . however I'd like to be able to do what I set out to do . Any advice ?
 

Relevancy 48.16%

hi! i have ASUS A7S333 motherboard and AMD processor and 256MB RAM. i have a hard disk of 10GB. the problem is that it hangs whenever i try to install XP operating system. and i have problems with the sound and the system gets hanged frequently. i have installed WIN98SE on my system. can someone help me how to install XP on this system and the mother board utilities?
 

A:asus motherboard troubleshoot

Hello and welcome,
10GB hard drive is a little small for XP. I would go with a 40GB minimum. You can go to the Asus Support website and download the motherboard utilities after you install XP. It is possible that you might need to update the motherboards bios before you can install XP. You need to make sure that the motherboards bios are set to Failsafe Defaults and take out any network, sound or USB cards before you start installing XP. After the XP install completes, you can reinstall everything
 

http://www.techspot.com/community/topics/asus-motherboard-troubleshoot.67867/
Relevancy 48.16%

Need to know the multiplier specifics when installing this cpu onto this motherboard.

Cpu Frequency
Memory and bus frequencies
Thnx.
 

Relevancy 48.16%

i bought a asus A8v-VM SE motherboard and from the internet specs its supposed to have a realtek card onboard it however the computer isn't finding it does anyone know why and where i can find a driver for said sound device
 

A:asus motherboard but where the sound

Have you tried the Asus website?
 

https://forums.techguy.org/threads/asus-motherboard-but-where-the-sound.572239/
Relevancy 48.16%

i was gonna upgrade my motherboard, and this mobo seems to be able to run up to a 3200+ with 8x agp, its only AU$91 @ gamedude computers, has any1 bought one of these mobos before and had problems, i want to know all i can about them before i buy one
 

Relevancy 48.16%

I have been looking at purchasing an ASRock(by ASUS) X533 Motherboard along with a P4 processor to upgrade my system. Please let me know any good or bad points/comments/opinions on this board and what would be a suffient size AGP video card to buy for normal computer usage. No intense game playing.

Thanks
James
 

A:Asus Motherboard Upgrade ?

http://www.newegg.com/app/viewProduct.asp?description=13-130-426R&depa=0

how much are you planning on paying for it? i would prefer the one i linked to above, unless you are getting a really cool deal on the one you mentioned. it has onboard vga, lan, and audio.
 

https://forums.techguy.org/threads/asus-motherboard-upgrade.178320/
Relevancy 48.16%

Need to find manual and spec sheet for Asus P4sd-vx mobo. its from sony vaio PCVrs-421 machine. not available on sony or asus website, Any info on this mobo would be helpful
 

A:Asus P4SD-VX motherboard

just curious what do you need to know about the board??
 

https://forums.techguy.org/threads/asus-p4sd-vx-motherboard.758954/
Relevancy 48.16%

Hello I have motherboard & USB Asus problem a ASUS P L-VM motherboard Specs are included in my profile A computer that I built a couple of months ago When ever I have my USB external DVD writer powered on when I boot up it is very slow to get past the Asus post and when I Asus motherboard & USB problem have my port Belkin USB hub on it will not boot into windows - just hangs on checking USB area in the post If I unplug them and reboot the computer will go though startup quickly I have the latest Bios update from ASUS for my MOB Asus motherboard & USB problem Also downloaded a update from ASUS for my MOB about MS KB USB fail to enter S patch file for Windows XP Was a registry file Entered it into the registry Do I need to go into the bios and set something different in the USB configuration I have the USB function - enabled Legacy USB support-Auto USB controller - enabled USB controller mode - HiSpeed Bios EHCI hand-off - enabled The setting recommended in the MOB guide or is it something else Hate to always have to start by USB devices after booting and remember to turn them off before rebooting Any help or information would be appreciated Nola UPDATE - Resolution In case anyone else has this problem this might help This was a problem with both ASUS motherboards P L-VM from the get go Had to change USB configuration settings in bios in order to get past post in the usb area when booting up with usb hubs plugged in Changed the USB controller mode Set mode from HiSpeed to Full speed and un-enabled Bois EHCI hand off Computer now boots fine with different usb hubs plugged in along with USB DVD writer nbsp

A:Asus motherboard & USB problem

Check the BIOS and disable Boot from other Device from your boot device options. Leave only a floppy (if you have one), hard drive and CD drive.
 

http://www.techspot.com/community/topics/asus-motherboard-usb-problem.94785/
Relevancy 48.16%

ok i have a asus p2b 440bx motherboard with p 2 at 266mhz
i just bought a intel celeron 800mhz processor
when i installed it it made this ticking sound and comp wouldnt start...
please help me
 

Relevancy 48.16%

Hai,

I am using Asus B85M-G motherboard. please tell me the settings tutorial step by step.
Before i am intel user. this is the first time i purchase asus board. so i want to know about settings.

Thanks & Regards
Bala.

A:Asus motherboard b85m-g

I don't know exactly what settings you are referring to, but ASUS has one thing that is different than all other brands. If you need to get into Safe Mode. Most brands are F8, but with ASUS you need to boot and hit F5 and it brings you to a menu and then you hit F8 which goes to Safe Mode. You need to remember that because it is very hard to find on Google or other Search Engines.

http://www.sevenforums.com/hardware-devices/391896-asus-motherboard-b85m-g.html
Relevancy 48.16%

Hi, I have a Asus P5LD2 (not deluxe) and i was wondering if i can use SLI with my Geforce 7600 GS on it. I think SLI is possible with my graphics card (7600 GS) but the question is will my motherboard support and work with SLI. Thanks
 

A:MotherBoard Question. (ASUS)

Hi looking at the tech specs i would say no

look here

http://www.asus.com/products4.aspx?modelmenu=1&model=515&l1=3&l2=11&l3=185
 

http://www.techspot.com/community/topics/motherboard-question-asus.91410/
Relevancy 48.16%

Hello all,
I had Nt installed and used the upgrade option to win2k. All my devices worked in NT, but now I am in the final stretch of installing 2000 pro server and I keeps on freezing halfway through the hardware detection part.

I removed all devices except CDROM, gen. floppy, and geforce 256 ddr video and Asus K7M board.

i couldn't find K7M under win2k device compatibility, but it worked fine in NT.

Do you think this is a compatibility issue?

ps. I have win98 installed on the last partition and it is working fine, so I don't think it's hardware.

Until then,
later,
-Micky
 

https://forums.techguy.org/threads/asus-k7m-motherboard-compatibility.49895/
Relevancy 48.16%

I just bought an ASUS M2N-E SLI motherboard to go into an ultra gladiator case.When I turn the motherboard over I notice a bracket on the back side.Will this bracket interfier with the mounting and does it matter if it touches the inside of the case where it mounts to because it looks awfully close.the case is an ultra gladiator mid tower atx case
 

Relevancy 48.16%

Quick question... hope somebody can help:

I'm running an Asus P2Bf motherboard in my PC. When I built the machine, I installed a Celeron 400 chip. I'd like to upgrade but I need some advice on what to upgrade to. Asus hints that any compatible PIII chip will work. Any body out there have experience with this board--care to offer an opinion?

Thanks mucho,
Mark Simpson
 

A:Asus P2bf motherboard

Depends on which board revision you have, I would look at the board and find the revision number and email asus
[email protected]

You will need a bios flash to get the latest supported processors.

Asus state p3 support for coppermine depending on board and bios revision.
 

https://forums.techguy.org/threads/asus-p2bf-motherboard.64488/
Relevancy 48.16%

Hi,

I just installed my copy of Windows7 and from the looks of it, it looks very very good.
But i have a problem.

I wanted to install my Motherboard drivers via the InstallCD that came with the motherboard.
But when i launched the install on the CD it gives me an error.
This one ;

Motherboard Support CD does not support this operating system(WNT_6.1P_64.)

And i can't realy find a good solution for this..

It's realy important to me, because now I don't have the ASUS Programs i always use and I don't have any sound.

Please help me quick.

Greets, Gregg

A:Motherboard ASUS P5K/EPU Drivers

Just run the setup.exe with Vista compatability mode

That's how I installed the mobo drivers on my P5Q.

http://www.sevenforums.com/drivers/3245-motherboard-asus-p5k-epu-drivers.html
Relevancy 48.16%

Anyone know the fastest cpu this motherboard can handle?
 

A:sp97-v asus motherboard

Here's what Asus says about it:

Processor
Intel Socket 7 ZIF Socket for CPU
Intel Pentium Processor 75/90/100/120/133/150/166/200/233 MHz (P55C/P54C/P54CS)
AMD-K6 -PR166-233MHz
AMD-K5 -PR75-133MHz
IBM/Cyrix 6x86-PR166 ~ 6x86-PR233
IBM/Cyrix 166+

hope that helps
 

https://forums.techguy.org/threads/sp97-v-asus-motherboard.41893/
Relevancy 48.16%

hey
i was thinking of upgrading my gf2 mx400 64mb to a geforce mx4000 128mb, however i dont no how to see if it will work on my motherboard,

http://au.asus.com/products/mb/socket478/p4sgx-mx/overview.htm#
(my mother board)

http://www.directron.com/aslmx4000.html
(the graphics card)

thanks
 

A:mx4000 on asus Motherboard?

Your mobo has an AGPx4 slot and will accomodate that new card without any problems.
That card is AGPx8/x4/x2 compatible, so no problems.
Check if there is a jumper on the mobo, or a setting in the BIOS, to switch off the onboard graphics. Some mobos switch it off automatically when you insert an AGP card.
Before you put the card in, uninstall the current graphics drivers and load the most basic, windows-own VGA drivers. Then switch off and do the swap.
 

http://www.techspot.com/community/topics/mx4000-on-asus-motherboard.23496/
Relevancy 48.16%

Hi all,
Im am putting together a machine for a friend to use whos machine died and cant afford a new rig right now. im putting together a 939 system for him from spare parts i have and would welcome any input on two motherboards im deciding between. one is a Asus A8N-LA, chipset GeForce 6150 LE
* Southbridge: nForce 430 (southbridge also called MCP51)
and the second is an Asus A8S-X-SE chipset 965-SL. I am wondering if one is superior, chipset,Bios,overclocking, reliability, northbridge etc. I know the A8N-LA has most bios features locked (HP saving me from myself) but if you have any experience with these, or an opinion I would love to here them.

Thanks
 

A:Asus Motherboard expert?

The A8S is an SiS chipset. SiS (Silicon Integrated Systems, incidentally) is absolute garbage. HP can't make an AMD based system worth the powder to blow it to hell. Every HP system built around AMD that I've ever seen or had the displeasure to work with is a dog.

However.. If you're forced to choose strictly between the two, the A8N is a better board. Personally I'd scrap both of them.
 

http://www.techspot.com/community/topics/asus-motherboard-expert.117986/
Relevancy 48.16%

I am having a computer built with the Asus A N SLI Motherboard and have done a lot of research I know that I need to replace the chipset fan with the Zalman cnps B-cu cpu cooler but getting confused about the best hard drive in the to G category and memory to have installed Also any suggestions on the AMD processor The computer tech who is building it recommends the AMD A8N Asus Deluxe Motherboard SLI Athlon but I know that the dual core processors are now being offered Because I will probably keep this new computer for at least years the one that I use now is years old - still chuggs along I try to get a computer with top of the line hardware Also he recommends Windows XP Home Asus A8N SLI Deluxe Motherboard but a lot of people state that the only way to go is Xp Pro I ve been researching all of this for weeks and I m starting to feel that I need a brain transplant I would sincerely appreciate any suggestions or comments nbsp

A:Asus A8N SLI Deluxe Motherboard

All right so you are going with the 939! If you really want THE best processor, go either AMD 64 fx57 or 4800 x2. They will both cost you about a $1000.
If you want to stay around the $350 mark, the 90nm 64 3700 is a good choice.
As far as Hard drives go, reccomend a 7200 rpm 8mb cache SATA, if you go Seagate you can even get native command queing! Two of these in a raid 0,1 and you have a OS that runs like you put it on a 20,000 rpm hard drive.(not quite but it is damn fast and safe.)
I would say go for Pro if you won't upgrade to Longhorn, home if you will upgrade. If you want to be safe and don't mind everything not running perfectly everytime. Go SUSE or Redhat Linux.
RAM, don't go generic. PNY, Kingston are good, I can't remember if this board supportd dual channel or not, but if it does make sure you buy in pairs to get the best performance.
Scatter brained approach to helping, sorry but I hope I helped
 

https://forums.techguy.org/threads/asus-a8n-sli-deluxe-motherboard.384821/