i can,t find out what my mother board make is.there's no markings on it!.
i need this so i can download the graphics driver because when i reformated it(second hand system)it will not let me change the screen size or number of colours.
is there a site that i can log on to that mite be able to help?
whats do you think?
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp
Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
AMD has released an updated statement regarding the noise issues experienced by the initial buyers of its Radeon R9 Fury X graphics cards.
Are they saying "screams like a banshee until we smothered it in glue"? Does anyone have a more engineered approach to the issue - like decibels at a specific distance?
It's been a while since I've posted but I've obtained most of the Sims 2 and I TRIED to install Double Deluxe but for some reason my dvd drive isn't recognizing the disc. It spins up and tries to read it, but doesn't do much in the line of effort to read it.
There are no scratches and I took care of the smudges with a cloth. Still unable to read the install disc. It'll read the promo/bonus disc and play it just fine though.
The computer is a Windows 7 with an HL-DT-ST DVD+-RW GT60N Drive.
I have enough RAM, Graphics and other things to run it.
300 Gigs of Space left on the HDD. No idea what's going on here.
You might have a bad optical drive. Does it work with other DVDs (DVDs not CDs)? Do you have access to another DVD drive with which to substitute for testing purposes?
I have a linksys router that has stock firmware and I can get into the config by 192.168 etc but I can't get it to see the internet. I have a isp that gives dhcp ip so no login needed. Any ideas?
Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp
Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:
1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...
2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...
3. Start adding one piece of hardware at a time and repeat as directed.
What are your findings?
Hi techspotters it has come time to modify my old rig I m planning to upgrade the cpu without changing my motherboard but there is a slight risk involved that the purchase I am going to make is with CPU board AM3+ AM3 faul So back to basics My current MB M A TD PRO AM3 board with AM3+ CPU USB - link Current CPU Phenom t oc running ghz Current RAM EVOleggera x running underclocked mhz the one to upgrade to AMD FX -- So this is a basic operation a cpu swap but few questions popped up on the research phase M A TD is a AM board which apparently after some searching supports some of the FX series cpus that are AM I have also found the corresponding BIOS that I need to flash myself to to make it work properly and be recognized by the MB link Q amp A FX is known to support mhz RAM speeds my existing RAM runs max at without overclock and is placed x which occupies all slots and might confuse the FX which supports dualchannel as usual Meaning I will need to leave my RAM running at mhz how big will the reduce be in the performance of the CPU- mhz vs When setting up the proceccor I will need to disable the Turbocore to make it stable on the older AM board which only supports cpu speeds up to ghz and the fx on turbo bumps to ghz After disabling turbo all cores are set to run at which by research is the most stable option on my existing MB Will FX bottleneck gtx or gtx and how bad it is going to be Upgrading hardware is always nice but am I making bold move by upgrading a year old cpu to almost as old one And if someone with more knowledge can state me that there is no performance gain to be maid I just might stick with my old as long as its still breathing and calculating Thanks in advance for replys And no changing an motherboard is not an option So fond of my old rig best regards m nbsphttp://www.techspot.com/community/topics/am3-board-with-am3-cpu.214400/
Basically I think it s Laptop Samsung Ultrabook Series 5 Problems; been happening for a month now My laptop screen glitches - the images distorting and sometimes green text appearing - Laptop Problems; Samsung Ultrabook Series 5 before Laptop Problems; Samsung Ultrabook Series 5 righting itself and crashing The only way I can get the Laptop Problems; Samsung Ultrabook Series 5 laptop to function again is to turn it off via the power button or take the battery out and put it back it again It has also become slow starting up - taking at least five minutes before you can log in and then a further five before you can actually do anything The cursor sometimes gets stuck in the center of the screen - I can access things using the tab screen but the cursor won t move whether I use the laptop touchpad or my USB mouse The fan has also been sporadically speeding up before calming down again - even though I ve been doing the same thing for the past god knows when I ve done a boot-up scan using avast had a look through all of my files and gotten rid of any old files that I don t need on there in an attempt to create some space but I ve got about - gb free so I can t see why that should be a problem Nothing happens before the glitches crashes so I don t think I m causing it by moving it and so on About a month ago the charger port was fixed at a laptop repair shop and then the laptop itself was sent off to SAMSUNG to have the motherboard replaced because I mistakenly wiped the bios since one driver update shut the laptop off in the middle of the bios update so I don t know if something is loose and so on I m planning on selling it in a month or two so it s not that much of a problem but of course I don t want to sell it to someone if its being a pain in the backside I also switched from integrated graphics to a nvidia geforce graphics card that is in the laptop when I bought it so that might be why Basic Info Samsung Ultrabook Series Intel Core i GB Ram TB Hardrive bit Operating System NVIDIA Geforce GT M nbsp
This sort of problem is tough to troubleshoot over the internet. It could be quite a few things that could cause the symptoms that you're experiencing. With that said, I'd probably start with updating the discrete GPU drivers. Since you did switch from integrated to discrete, this could be the main cause for the graphic glitches which is probably crashing the system.
Moving forward, I think you should download something like CPU-Z to monitor the CPU load and temperatures during the crashes. It could be that your CPU is overheating and could use some attention.
I bought an interesting little Single Board Computer as an mITX motherboard (a WADE-8020, more info at the link below):
I have another similar board in an old Hoojum Cubit 3 case, and was wondering if anyone might have any other suggestions for a similarly eye-catching case, probably ready-made, though I'm not averse to either buying a DIYed case, or maybe trying to make one myself (I have a Dremel but not much else, and that includes skill )
I have a keyboard that has been working fine last night then this morning this happened:
When I type o it types o+ and when I type l it types l and enter (the key)
So this makes it extremely hard to get anything done, please help, thanks
How old is the keyboard? Sometimes "gunk" gets built up under the keys and can cause the keyboard to start failing. Have you tries to remove the keys (or take the keyboard apart) and properly clean it? There are plenty of tutorials (video and non-video) available if you are unsure of how to clean a keyboard.
Regular cleaning on all computer parts will extend the life of those parts.
For about the past month or so, my W7 tower on DSL occasionally loses its connection to the internet so I right click the the icon in the notification area & click trouble shoot & it reconnects yet my iPhone & Ipad remain online no problem.
Clearly the router is doing find and the activity on W7 IS THE ISSUE.
Examine carefully what was active when the connection was lost.
I have a Dell Optiplex 330 which has a 2.0 dual processor with 4gb of ddr2 ram. I have windows xp installed and I have a video card that has 1024 mb of ram. I am unsure of the brand of video card or further specs. I bought it off of ebay some time ago.
My problem is that when I try to play streaming video it wants to freeze a lot. I have already given more space for the virtual memory on my computer: I think 4 to 8 gb and I have set my hardware acceleration way down but these changes haven't helped.
I can download and play movies fine, I only seem to have problems when playing streaming video like from hulu.com or letmewatchthis.com which directs you to sites like: putlocker, deditv, sockshare, loomba, etc. I have used other computers and they don't seem to have as much problems with this so I hope that somebody knows what I need to do to solve this problem. Thanks in advance for any help.
When you say freezing, do you mean just the video freezes, or the whole system? If its just the video, it could have something to do with your internet connection. Is the computer on wired internet or wireless?
Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!
Dell Optiplex 790
Win 7 Pro
How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
On my studio pc, I've installed a new rack mounted firewire audio interface in the studio. On the other drives (windows 8.1) the interface has installed perfectly but on the xp drive, although the drivers etc have been installed, once set, it works perfectly with the new outboard soundcard.
However, whenever I reboot to the xp drive, xp always reverts back to the on-board realtek sound card. I set the default to the new interface (a Presonus Firestudio Project) but every reboot it defaults to the realtek.
The motherboard is a P5N-E SLI if that helps.
How can I stop this happening so the new interface is the default?
Thanks in advance,
See picture below. Any ideas? Ive cleaned the rollers, and the main charger, and pretty much anything else I can find in the copier. Havent replaced the toner cartridge though. Originally there was toner all over the place and the dotted line was a solid black line. Performing the aforementioned maintenance items got rid of the thick black line but now this remains.
Any help is appreciated
I seem to have quite an annoying problem with my new 256gb razerbalde. Whenever I launch a game I get a black screen the sound still works but no response from the screen, I have to put it to sleep and back on again and it works even though sometimes I need to do it 10 times or so. I have updated to all the newest drivers and tried a secondary display through hdmi it gives me the following error message: failed to initialize renderer. Unknow error creating the renderer. I only tried launching skyrim so far. The error seems to happen sometimes but not often when I will start the laptop and the screen will be the same. It's more of a black/greyish color and you notice that it is on.
Any help will be of great use. If the post already exists I am sorry and would be happy to get the link.
I'm having trouble staying on line with telstra connection my internet keeps freezing and dropping in and out I have had trouble with my home line phone and have a bullion modem which this isn't the problem, the problem I believe lays with telstra as I've checked with my server and with downloads and updated my PC so what can I do next.
June Lomas said:
what can I do next.Click to expand...
I have been having quite a few issues with the motherboard I have from ASRock. It is the Z87 Extreme4. My issue is the usb 3.0 No matter what I plug in it says this device can perform faster than this blah blah blah. Anyway, that should not be happening as I am plugging in usb 3.0 devices. What is going on? The other problem is that my front ports that are from the mobod header will no longer recognize any of my external 2.5 hdd. 1 on the back also says this so I am limited to just 3 ports on the back that I can plug into with my external hdd and they are very important to what I do. Is anyone familiar with this? Is this only on this board or a common thing among ASRock? I have other computers and the usb 3.0 works just great.
Have u Installed the drivers? I do not know any thing about ASRock but lots of USB3 have to have the drivers.
I have been experiencing some serious FPS problems with my Laptop recently. I Used to run games at somewhere from 60-120 FPS, but now its dropped down to 5-14 FPS. It happened recently. A couple days ago on Saturday Oct 4rth, I was playing Team Fortress 2 on Steam. I shut off my computer to go to sleep for the night and when I turned on my computer the FPS problem started almost immediately after I turned on the PC. Its not just Team Fortress 2 either, Its happening to all of my other games also. I am not sure on what to do and the only though that comes to my mind when I wonder what the problem could be is a virus. (I have virus protection Webroot but I'm not sure if it works to well.) I might have to Factory Reset my computer, but I want to try different solutions before I Factory Reset. Any Ideas?
My Laptop Info: http://gyazo.com/f1acf76e4e8e9febcec1e6e62991b297
Back up your important data and do the Factory Reset. Apply all the Windows Updates, and then try your games. Webroot is not an antivirus program. Try installing MSE:
Hi all. Well I am having problems with turning on my Toshiba satellite c50-a-19t laptop. The night before there was a smell coming from the fan so I turned it off. I put it on charge in the morning and when it was fully charged I went to use it. The white light on the front goes on for a sec and then goes straight off and the laptop don't power up. Any ideas guys ???
Sounds as though it may have over heated and something may have shorted out. you will need to have it looked at your local repair shop.
Everytime I plug in the Ethernet cord to the router. It lights up and doesn't blink. After a couple of seconds, it just goes dark and I'm unable to use the router.
It works from time to time (I always have to unplug and it replug it back constantly) and I tried plugging in the router without the Ethernet plugged in and it looks like it works fine (Lights blinking). I plug in the Ethernet after that and it continues blinking for a few seconds then it darkens.
It's a Linksys router. WRT5462 V1 (Cisco)
Have you tried more than one cable? The cable could have gone bad.
I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsphttp://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Hey so I wasn t really sure where to post this as I am quite new to the forums but here I go So my first problem is with my laptop s adapter charger not really sure what it s called in english it no longer charges as in the tiny green light no longer turns on when I connect it to problems Two an outlet and yes I Two problems have tried more than just one outlet It s dead From what I ve read on the web I suppose the only way out is buying a new charger Or trying to open the charger box and fixing it Is that possible If so any tips on how to do that - My second problem is releated with the internet modem I have cable internet and after this storm a coupel of days ago it started playing tricks on me even though the cable is plugged into the pc and the modem is working for about a whole minute my pc says that the cable is unplugged and only after that does it recognize it and connect me to the internet Any ideea what s wrong I suppose there s fault in my modem because before when it worked just fine about three green lights turned on right after turning it on but now only two do the dsl and power one I don t know fpr sure but I think the third one used to be ethernet And that s about it If anything s unclear please ask english is my third language so I might have made some mistakes here and there thanks for your time nbsp
DO NOT open that "charger box." It is dangerous to do so because it can hold a charge of electricity for quite some time. Either buy a new charger from the laptop manufacture or, if you can, purchase a new charger from the likes of Targus. I have a Lenovo laptop and bought the Targas brand as a back-up. It works great and Targus supplies several adapters to work on many different brands.
Secondly, was your modem and router plugged into a surge protector or do you have them plugged directly into the outlet?
Your English is quite good.
So heres the story The computer has been working fine for several years Last night I decide to D850MV/D850EMV2 long Three desktop board beeps on Intel plug in my tv to the desktop via dvi It Three long beeps on Intel desktop board D850MV/D850EMV2 works fine and I dont have any problems I get home today and try and turn the computer Three long beeps on Intel desktop board D850MV/D850EMV2 on and I dont get any video signal to either the tv or the normal monitor Also long beeps accompany start up it sounds as though things boot but I dont get video or sound but it sounds like the hard drives click now and then like normal and the fans all run fine Ive swapped the first ram stick with one other and havent tried the rest yet and I have not changed the video card yet but plan to in the next minutes as of writing this Nothing looks physically damaged and I dont have any extra ram for this computer laying about since its a rambus so all I can do is swap the ram thats in it around and because I cant get video I cant run a test on the ram Suggestions or help would be appreciated Specifically what the long beep codes mean ive Three long beeps on Intel desktop board D850MV/D850EMV2 found a couple different versions of the code online and not sure which is correct Also what might have caused the problem plugging the tv in thats the only thing I did different unless someone was messing around with it without my knowledge or could it just be from years of wear or what nbsp
I think three beeps on Intel is a memory issue. At least that what it was when I had a stick of cheap RAM crap out on me.
I'd run Memtest and go from there
RAM can fail from a number of causes. Heat exposure, flaky transistor junctions, who knows. I seriously doubt plugging the TV in had anything to do with it.
You could go into BIOS to ascertain if the RAM voltage is set correctly. Over-volting is a DIMM killer.
You should be able to get documentation for that board directly off Intel's web site. Intel used to give BIOS beep codes ion the board/chipset manuals.
They also have hardware monitor software as a free download. Look up "Intel Desktop Utilities Lite".
Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
They are so cheap now it is probably worth everyone's time to just get a new one.
If you really want to troubleshoot it, put it in a different computer or OS.
Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
This is my Entire system spec Im looking to upgrade my processor but I need help Operating System System Model Windows Home Premium x Service Pack build Install Language English United States System Locale English United States Installed AM Boot Mode BIOS Secure Boot not supported eMachines ET G System Serial Number PTNBA Enclosure Type Desktop Processor a Main Circuit Board b gigahertz AMD Athlon II X u kilobyte primary memory cache kilobyte secondary memory cache -bit ready Multi-core total Not hyper-threaded Board eMachines MCP PM-GM Bus Clock megahertz BIOS AMI P -A Drives Memory Modules c d Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space HL-DT-ST DVDRAM GH N SCSI im with AMD is board? to my What Processor mother compatible this And new CdRom Device Optical drive WD Virtual CD USB Device Optical drive Generic- Compact Flash USB Device Hard drive -- drive Generic- MS MS-Pro HG USB Device Hard drive -- drive What AMD Processor is compatible with my mother board? And im new to this Generic- SD MMC USB Device Hard drive -- drive Generic- SD MMC MS What AMD Processor is compatible with my mother board? And im new to this MSPRO USB Device Hard drive -- drive Generic- SM xD-Picture USB Device Hard drive -- drive WD My Book USB Device Hard drive GB -- drive s n WMAVY WDC WD AAKX- CA SCSI Disk Device GB -- drive s n WD-WMAYUL SMART Status Healthy Megabytes Usable Installed Memory Slot DIMM has MB serial number DE B Slot DIMM has MB serial number D B Slot DIMM is Empty Slot DIMM is Empty Local Drive Volumes c NTFS on drive GB GB free k FAT on drive GB GB free Operating System is installed on c Network Drives None discovered Users mouse over user name for details Printers local user accountslast logon Quentin PM admin UpdatusUser AM local system accounts Administrator AM admin Guest PM HomeGroupUser never Marks a disabled account Marks a locked account HP LaserJet Professional P w on IP Microsoft Shared Fax Driver on SHRFAX Microsoft XPS Document Writer on XPSPort Controllers Display ATA Channel Controller ATA Channel Controller NVIDIA nForce Serial ATA Controller x Standard Dual Channel PCI IDE Controller What AMD Processor is compatible with my mother board? And im new to this NVIDIA GeForce GTS Display adapter DELL WFP Monitor quot vis s n XX- JU -XXXXX- - S June Bus Adapters Multimedia Standard Enhanced PCI to USB Host Controller Standard OpenHCD USB Host Controller HP Webcam HD- Mobiola Wave Audio Device WDM Mobiola Web Camera Video Source NVIDIA Virtual Audio Device Wave Extensible WDM Realtek High Definition Audio Senstic PocketAudio Senstic PocketCam USB Audio Device Virus Protection Back to Top Group Policies No details available None discovered Communications Other Devices Hamachi Network Interface primary Auto IP Address Gateway Dhcp Server Physical Address A D Connection Speed Mbps Microsoft to Adapter Microsoft ISATAP Adapter NVIDIA nForce Mbps Ethernet Auto IP Address Gateway Dhcp Server Physical Address FC C AA Connection Speed Mbps Teredo Tunneling Pseudo-Interface Networking Dns Servers HID-compliant consumer control device x HID-compliant device x USB Input Device x HP Webcam HD- HID Keyboard Device x HID-compliant mouse Microsoft PS Mouse USB Composite Device x USB Mass Storage Device x USB Root Hub x Generic volume shadow copy WD SES Device E F G H I nbsp
That is an AM3 socket CPU which means it should be compatible with the Phenom II series CPU's. I looked up the board and it should still support up to a 95 watt CPU so any Phenom II X4 CPU with a 95 watt TDP would work on it.
As the topic says, my computer doesn't detect my on-board sound card. It all started when I tried to install new audio drivers from manufacturers page, but the next day when I booted PC up there were no sound. In Device Manager, under Sounds, game,.. controllers tab sit 4-5 High Definition Audio Devices. Here's pic:
Then tried re-installing original audio drivers from motherboard CD, enabling/disabling On-Board HD Audio in BIOS but still no luck.
My Audio Device is VIA VT1705.
DxDiag shows that no sound card was found.
This is what is shown in Playback Devices tab:
But I have no HDMI kind audio devices..
How to make my system recognize my sound card?
I have a toshiba satellite pro and usually use the touchpad with my right hand rather than a mouse. I attached an external mouse for my daughter to use, and changed the settings to lefthanded. I disconnected and shut down. Since then, each time I restart the computer, the touchpad does not work correctly. Instead of double clicking on the touchpad, I have to rightclick. I have to go into mouse settings on control panel, and move the double click speed, click apply and then the touchpad works correctly then. Why is this? Please help.
Hi So my HTC just old Nokia Problems 7360 spare with got stolen so I had to dig up my old spare phone it s a old Nokia and it works somehow I can call and I can txt but I can t save any new contacts it just says something like quot forbidden action quot anyhow I can t copy old contacts from the Problems with old spare Nokia 7360 phone to the sim card I can t delete old contacts so I was going to reset the whole thing but I have changed the security code by default it should be and I can t remember what I have changed it to and yes I have tried all the possibilities that there are So what to do -any ideas P S It also says that the memory is full and it can t save any MMS WAP what nat settings EDIT Have got it connected to the computer now with a data cable and using Nokia PC Suite and I made a backup of everything just in case but Problems with old spare Nokia 7360 it failed to backup the contacts so I tried to just open and view all the saved contacts but it just fails Anyhow I m not really interested in the old contacts so I don t mind but when it fails to read the contacts it also fails when I try to add new contacts via the computer Next step was to download Nokia Software Updater that s also what the PC Suite suggested but it can t quot find quot the phone when it s connected So what next -I could send it to Nokia so that they there would flash it but then if there is some other problems with it it would cost a fortune and it s not worth it nbsp
You need to go in the nearest nokia care point at your place. You can also go to unauthorised repair shop for reformatting or reflashing.
Hello, yesterday I was using my computer and I shut it off. When I came back a few hours later, the wifi couldn't connect, and, unlike most times life this, it displayed an ethernet symbol with a red 'x' opposed to the normal wireless symbol with an 'x'. My computer stopped connecting to any wireless, though works fine with ethernet.
It is a Lenovo Ideapad with Windows 8
I've tried rebooting (I'm clueless, but not that clueless), updating the OS, uninstalling and reinstalling the computer's drivers along with some more far-fetched stuff (I got desperate) such as removing the battery, waiting a few hours, and plugging it back in, but nothing has worked.
If anyone can help, that would be amazing, thanks!
Seems your WIFI adapter is being disabled. try enabling the device in your device manager or with the Fn+function key provided in your laptop.Click to expand...
That doesn't seem to be the problem, the adapter is enabled and the computer is not in airplane mode
I recently bought a new Motherboard for my PC, it is a GIGABYTE GA-F2A88XM-D3H, it has a USB 3.0 plug in. However even though I plugged my USB 3.0 plug into it I still have no use. These are my front USB 3.0s, although the sound and mic work fine in the front. I currently am using a Windows 8 64-bit computer and have all drivers up to date, I am wondering if there is a way to turn it on in the BIOS.
It seems to me like you are plugging the USB 3.0 device into the front of your case. If they are not working, it means you probably never connected the USB 3.0 header plug from the motherboard into the case plugs.
This is what I am talking about BTW:
Just to clarify though, you are trying to connect your device using the front case USB plugs? Also, if you plug the USB 3.0 device into the motherboard directly (in the back of the case), does the device work?
I recently bought GLADIATOR R7 260X Intel i5-4570 3.6GHz Quad Core Next Day Gaming Pc - Aria PC from Aria,it comes with CORSAIR CX series CX430 430W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply - Newegg.com and every so often the monitor goes off which I think may be due to a lack of enough power. Would it be beneficial to change to a Antec TPQ-850 850W Continuous Power ATX12V / EPS12V 80 PLUS BRONZE Certified Modular Active PFC Power Supply - Newegg.com that I have spare?
If you have the PSU as a spare, there is no harm in using it to see if it corrects your problem.
I have a laptop with the Realtek high definition audio and Dolby home theater installed. After the latest win8.1 update the Realtek program has stopped forwarding the sound through the Dolby program (which it managed to do perfectly before the upgrade). I tried using Viper4Windows too but that didn't work eighter. Is there an option anywhere that will allow me to fix this?
Are there any yellow (!) in the device manager?
After upgrading my MacBook Pro with Maverick, Audio Hijack Pro pretends not finding the source application for recording. Anyone the same problem?
Are you having a problem with your Internet connection or Wi-Fi? Whatever the problem ? from a flaky connection to Wi-Fi troubles or even no access to the Internet at all ? some router troubleshooting could fix things.
Some of this also applies to your modem, although many Internet service providers are handing out combined router-modem units these days. Your wireless router and modem may actually be the same device.
Reboot the Router Read more
I have the router of my isp and to have an extended range of the wifi we bought a new router which has a bigger range of its wifi now my brother is connected to this router and the other router is connected into mine which means it is taking the bandwidth of my router now the problem that im having is that when my brother seems to be uploading a photo or School stuff onto the internet my internet keeps disconnecting and lagging which probably means that his uploading is literately draining all mine up and im left with nothing isnt there a way to fix this or to cap the upload speed/download
QoS settings on the main router.
Hey, today i just got a new 4gb memory stick to add to my computer, currently i have 2 2GB DDR3 1333 RAM sticks.(These were both Kingston Memory Sticks) I then added a 4gb DDR3 1333 Ram stick (Crosshair) to the motherboard and made sure they were firmly placed in and it was all fine, I then turn on the computer and find that the motherboard starts beeping once then two beeps after and the Screen is blank, and my mouse & keyboard aren't responding. My current OS is Windows 7 64 Bit, so i shouldn't have a problem installing new ram to my system...
I'm not sure if this is a problem with 2 different brands of sticks or what.. but the fans are running for my Graphics card (I don't have onboard graphics available)
AMD 1055t X6
ASUS M5A99XEVO Motherboard
ATI Radeon 5570
Any help anyone? Thanks
The motherboard does not like that 4GB module. Have you tried the 4GB by itself? If the 4GB module won't run the computer you'll have to stick with 2GB modules. How many memory slots are on the motherboard? ASUS motherboards are notorious for being very picky about memory
OK where to begin Alright I got this new tower that is a decent custom rig I have been having problems with my HDD tb movies music etc and SSD gb OS Games basic running files randomly dropping out The HDD always goes sata Possible problems first I know it happens because I get a pop up from Utorrent saying the file save directory cant be found or there is an error with it I download movies ebooks etc Thats usually the first clue My Asus quick storage will pop up saying a drive has been disconnected then straight away it is found but it is unknown I can see the files in the HDD through my Computer but cant actually Possible sata problems access them I cant resolve this without a restart Now chance of after the restart wether the SSD goes aswell thus my OS A powerdown for a little while usually fixes this Longest wait time mins for a system go Then its all fine and dandy like nothing happened I have checked Possible sata problems connections and cooling psu and Possible sata problems its new so its clean no dust I power down the system most nights out unless I really wanna d l something for the next day It has stock OS with Minecraft Dayz Halflife and Portal installed and I have DLed about tb of previous torrents that I have already dled from trusted supplies with avast installed the expensive one not the free version Apart from that stock Anything else I can tell you to try to help me troubleshoot this please just ask System specs Case Corsair D Full Tower Cooling Corsair Hydro Series H i Liquid Cooler for CPU CPU Intel Core i - K GHz Quad Core LGA Motherboard Asus Z -Plus ATX Memory RAM Corsair GB Vengeance Pro Mhz Video Card x Nvidia Geforce GTX ti Hard Drive Samsung Series Pro GB Hard Drive Seagate Barracuda TB rpm CD-drive LG Blu-ray rewriter combo Power Supply Corsair HX Modular Watt Plus Gold Operating System Windows Professional edition bit And not on here a couple of additional fans Thanks in advance for any help nbsp
Hey Zac. Since it comes back after a power down and brief rest, to me it sounds like a heat buildup problem, maybe even with the CPU. Has the builder checked it out?
Last night all of my wireless devices (kids computers, laptop, IPad, and Wii) suddenly stopped working. The only thing I can seem to come up with is to unplug the router and let sit for a few minutes to see if that corrects the problem. It has not.
What else do I need to do to get my wireless connection back up and running?
That was a good try. what was going on for all your devices just before you lost connection?
Hi I have the same problem message quot An Operation was attempted on something that is not a socket quot etc appeared Also my Node Type is unknown I tried all steps mentioned above and I never made it to have Node Type hybrid It appears to be unknown even after adding node type and value And about this quot You should see a complete set of TCP values and using IP problems connection Limited with release/renew the command Prompt ping nslookup quot I got something completely different it says for nslookup that default server is not available server unknown cant find server for address etc Any idea how can I try to fix Limited connection with IP release/renew problems problem It all started with Limited connection with IP release/renew problems IP address conflict Once it was solved thanx to this cmd netsh int ip reset resetlog txt netsh winsock Limited connection with IP release/renew problems reset catalog But it does not work any more It shows that local area network is connected and there is still message about IP address conflict Many thanks in advance Moderator note Moved from this thread http www techspot com community topics limited-connection-with-ip-release-renew-problems nbsp
It's a little difficult to pin down what your problem is without knowledge of your network and router setup, but IP collisions and connection issues that get fixed temporarily with release and renew are usually related to misconfigured DHCP settings. Such as when two routers are distributing IP addresses to the same range of systems, or when some devices list static IP address, or sometimes if a wireless device is also plugged in with a network cable, claiming the same IP address with both connections.
if you ping those google dns addresses (184.108.40.206, or 220.127.116.11) and you get errors instead of replies it just means your not connecting to the internet.
Like I said though this is generic stuff and no one will be able to be more specific until you describe a bit about your overall network layout, and types of connections.
I have been having problems connecting my laptop to the internet over my home's wifi network. Other wireless devices still connect no problem, but since Thursday I can't connect with my laptop. I have tried numerous solutions culled from google, but nothing has worked. My most recent attempt was from this forum so I decided to try here first for a solution specifically for my situation. I have an Asus i5 Windows 7 computer with a netgear wireless router. My laptop says it connects to the network (wireless router shows this connection), but it shows no internet connection. I have used my cell phone as a wireless hotspot and the laptop is able to connect to the internet that way. I used a LAN connection to assure myself that the laptop could connect to the internet and it did just fine. I am at a loss and frustrated beyond belief. Any help would be greatly appreciated.
Did you get this issue solved?
Hi guys ive got a tricky one here, Ive recently run a cat6 straight through cable to a separate dwelling from the main house to my EVG2000 Router modem. the Cat6 cable is connected to the main house at another EVG2000 router modem. The problem I am facing is My laptop(s) and computers can connect wirelessly with internet access fine but my galaxy S4 phones, iphone, ipads and xbox's connect to the new router in separate dwelling but have no internet access how ever they work perfectly through the main house's router fine. I've tried power cycling both modems, tried different ports. I have not tried to forward any ports as of yet as I have little experience in doing so. Hope you guys can help cheers
Hey firz3h. I think I follow you, correct me if I'm wrong. Your internet connection comes into the main house and goes to the EVG2000 wireless modem/router combo. You ran a line from this unit to the separate dwelling and it connects to a second EVG2000 unit, is that so?
Do you need both wired and wireless capability at the separate dwelling or just wireless capability?
If both are needed, a wireless router should be able to have it's DHCP function turned off so that it acts as a switch which will enable you to connect 3 devices by Ethernet. On the fourth LAN jack, I would connect a WAP (Wireless Access Point) which should give you a wireless signal . It might be easier to just get a 4 port switch instead of trying to disable the DHCP function of the second router. DHCP assigns IP addresses to the devices that try to connect, and using 2 on the network will cause issues. I think this would work, correct me if I'm wrong folks.
After my brother sprayed it with glass cleaner.my laptop key board types wrong letters.lets say I want to write "my laptop key board is messed up" this is what it types: my lap0to9p0 ke3ybo9ar4d i8s me3sse3d u7p0. all the letters in the upper row type the letter and the number above it and vise verse(exept t,y,5,6)
I tried the num lock and sticky keys,checked my language tap still nothing
(I use dell inspirion , windows 7)
Have you tried a USB keyboard? If not, try it. You might also try the on screen keyboard.
Has anyone this problem or know how to fix it. When switch on my computer the mouse & keyboard do not work. If I then remove all the USB cables it will then work ok, after a few reboots. I am running Windows 8 64 bit. Would appreciate any advice.
So this is my current situation.
I don't know why my download is so low, sometimes it's skyhigh (~60mbps) and sometimes it doesn't even make the 1 mbps I'm hooked on straight to our main modem I even put off Wi-fi and everything and I still have around 5mbps please help
Contact your ISP and tell them your download rates are fluctuating. They have ways of testing for problems with the lines.
I'm not sure why but the sound on my advent laptop seems to be stuck on mute. It plays event sounds, email arriving, closing down etc., but won't allow music or video to play sound.
It's running on Windows Vista and I've tried Function +F5 and F6. The speaker icon, bottom right screen, has the mute symbol'x' by it. When I right-click it denies any audio facility exists.
Please help as I'm stuck in France without a TV.
There is probably a program conflict that occurs some time after boot up. How old is this laptop?
I just came from a retail store to check on prices but most of their parts weren't available anymore. Instead of a G. Skill Ripjaws 2x4 8gb DDR-3 1600, the clerk offered me a Crucial Ballistix 2x4 8gb DDR-3 1866 memory. The board I'm gonna buy is an Asrock H77 Pro4/Mvp but looking at their memory support list http://www.asrock.com/mb/memory.asp?Model=H77 Pro4/MVP, it doesn't seem compatible.
The clerk had told me it was compatible and that he had tried it before but I'm not sure if it'd have unwanted effects over some period of time. (I got drawn in by how the memory looks and its LED so I'm including it as a choice). Thanks.
It will be compatible, worst case scenario is just setting your 1866Mhz RAM to run at 1600Mhz. You're getting quicker RAM for free.
I recently bought this board(1 week ago) and noticed after installing windows 8 with all the drivers from the disk, that all my USB ports randomly started having problems recognizing certain USB devices such as a wireless dongle and a few wireless mouse and keyboard combos. There were no problems with any USB-storage devices. There are no yellow marks in device manager. I have updated the drivers, to what was on gigabyte their website, but it didn't workout. Did the same after installing Windows 7 to no avail. Have done some research and it seems there are problems regarding VIA VL800 chipset. I disabled it and it seems to help. Although it might not be the case, cause I've only tested it for 2 hours now without problems. But that means there are 4 USB3.0 ports on the back I can't use. Any suggestions please. Thanks in advance
You dont wanna disable a chipset. That is the basically the heart of the PC. The CPU is the brain and the chipset is the heart. Without it, a lot of things can go wrong. I cant seem to find USB3 drivers on the Gigabyte site. Usually when I give poeple drivers from new machines, there is usually a USB 3 driver. Pretty odd. Head on over here and install the chipset driver: http://www.gigabyte.us/products/product-page.aspx?pid=4325&dl=1#driver. On the site it is listed as "Intel INF installation". If this doesnt work, I would recommend sending back the motherboard with a complaint about USB 3 not working. Never install drivers from the disk by the way. Also, the chipset driver I provided may not be 100% up to date, but I am pretty sure it is. I would give you the Intel version that may be more up to date but their download section is down.
My old wireless setup finally crapped out so thought I d try Bluetooth with the longer range One thing I didn t know about Bluetooth at least with this particular keyboard and mouse to a small extent is that after a brief period of inactivity it unconnects or deactivates or whatever and to reactive it I have to type a key and then wait for seconds or more for it to come alive Very irritating especially like when I m trying to sign into something or am Bluetooth problems Keyboard working Bluetooth Keyboard problems on something I ve looked in the app and don t see anything where I can turn that off I don t mind replacing the rechargeable batteries more often if I can avoid that deactivating thing Any suggestions or am I just stuck with that Maybe back to quot old fashioned quot wireless At least those were quot always on quot or Bluetooth Keyboard problems whatever you d call it It s a Microsoft mobile keyboard and mouse There was a small install CD that came with them I don t know if the dongle would make any difference Thanks nbsp
Well, on the hopes there was something in the Bluetooth app that I missed, I went back and took another look.
Not much there, really. But I enabled Bluetooth Network (even tho I only have the BT keyboard and mouse and no other BT devices) and enabled sharing with other BT devices (I guess between the keyboard and mouse and dongle or ?).
None of those seemed particularly applicable when I looked at them before, but
whichever one of those did something, I did a test on the keyboard and at least
yet it hasn't shut off even waiting several minutes.
Actually, would be nice if everything PC / Windows would be that simple!
Hi there I was out of my country for a while and when I returned my family told me that the desktop computer is not working Now when I BIOS Problems try to start the system it works fine until a message appears like quot Unknown CPU detected BIOS update is required to unleash its full power Press F to continue quot This message was always there though and when I pressed F it continued on the starting process However now the F does not seem BIOS Problems to work I had a generic keyboard so maybe I thought it was because of that so I went and bought an USB one and still no progress I wanted to reinstall windows to fix the issue however I cant access bios with the del key for some reason although it is clearly stated that I need to press del to enter bios Computer is like years old and here are the specs Dual Core GHz Intel CPU gb of Ram Asus Commando motherboard W Thermaltake power supply Geforce GT Win I formatted my pc a lot of times and it always worked fine until now bear in mind that this is a computer I put together and also there is no burning smell or shutdowns happening It just stays at that message and none of the keyboard keys seem to work I would really appreciate any help nbsp
Try borrowing a keyboard that has a PS/2 connection. Your generic keyboard might have had a problem. I had to use a PS/2 keyboard in order to enter into bios on an old desktop that I had. It was annoying, but for some reason the motherboard wouldn't recognize the USB keyboard until it booted into Windows. Give this a try and see if it helps.
I have some problems with my frames.
It's not slight, to say the least
Heres the problem: I will be getting 60+ Frames on Max settings, and then it will randomly drop to about 1-10 frames and stay their for 20+ seconds, and go back to normal. Happens consistently. Even when on the lowest settings, the same happens.
EVGA GTX 770
Intel 3770k i5 @ 3.2 GHz
8 GB of Ram (But 32 bit OS so 3.2gb is being used) <---Is this the problem?
Corsair 750w Power Supply
Corsair H60 Cooler
All fans on cards/ power supply is working
I custom build this PC from my Local Microcenter, around 20 days ago.
Games with games w/ varying distance visibility mostly.
Examples: Minecraft, Arma 2.
Your RAM is the bottleneck. Upgrade to a 64bit OS and you should be fine. Make sure you clean install it (Reformat)! That should cure the issue, but if it still lingers, you may have to wait till nVidia releases the official WHQL version of the GTX 770-supporting driver. You will have to clean install that also by choosing the "Custom Install" option --> check the box that says "Clean Install". You should be good to go.
I recently bought a set of tritton 720+ headset and it is not working well. Firstly there is a constant static sound(its very soft so I dont mind if it cant be resolved and it is only noticeable when there is no other sound playing). secondly I have connected it through my optical cable port and the sound isnt working when I set the default sound to the optical port.
Any help will be appreciated
A couple questions to try to help resolve this problem:
What are you trying to use this headset with (computer, stereo, console, etc)?
If computer - what do you have it connected to (motherboard port or a sound card)?
If motherboard connected, what is the make and model of motherboard?
Have you tried to use the headset on another device that has an optical port (ie. Stereo, TV, console, etc) to make sure that the headset it not defective?
Did you buy the headset new or used?
Hello there, this is my first post.
I have been having problems with my computer I believe it to be a graphics card problem.
I use the Nvidia GTX 650 and occasionally after about an hours use the screen goes blue (Not blue screen of death) I believe the card loses connection with my TV (doubles as my monitor) and if I restart it I get what looks to be binary flashing across my screen whilst all the colours of my load up/windows logo are blotchy and not the usual colors
Any help appreciated, Thanks.
Did you do a clean install of the GPU drivers? If you did not, I suggest you uninstall your current graphics driver and do a clean install. I use driver sweeper to clean out the old drivers thoroughly. You don't have to, though. Is your GPU new?
I have to ask, too, have you tried testing your RAM? The symptoms you describe can sometimes occur when you have a bad stick of RAM in your system.
Sorry I couldn't be of more help. But stick around. I'm almost certain the more knowledgeable members can help you out with this.
Hi My dad has recently taken to working from home but his laptop struggles to connect to the WiFi but it s ludicrously slow He needs to use the wireless printer and so I told him download the drivers for it it s a HP Photosmart C The download speed was sitting at around Kbps which is ridiculous I suggested connecting it with an Ethernet cable directly from the router It says it connected but it wont connect to the internet there aren t any packets of data being received so I ran an ipconfig test I ll put the results below I network - Windows problems. XP ve tried it on two diffrent router each one is the same Not too sure what to do I don t use XP so don t really know my Windows XP - network problems. way around and its not my laptop so I Windows XP - network problems. don t know who s done what to it He s blaming it on me fiddling with the printer Cheers for any help Ipconfig results Windows XP - network problems. with WiFi disabled and connect via Ethernet cable Windows IP configuration Ethernet adapter Local Area Conection Connection-specific DNS Suffix IP Address Subnet Mask Default Gateway nbsp
So far so good. you should be able to ping these:
ping 10.221.35.1ping 18.104.22.168then try
please report ipconfig /all results too
Hi Everyone Thank you in advanced for your time and help I am experiencing a Problems Printing strange problem and I m at the end of my rope here First of all here are my system specs OS MS Windows -Bit SP CPU Intel Core i GHz Sandy Bridge RAM GB Dual-Channel DDR MHz - - - MOBO Intel DH BL Socket Printing Problems GPU Acer S HL x Hz HDD GB Western Digital WDC WD EALX- BA SATA Optical Optiarc DVDRW AD- S Here are the printers I am using Local Brother MFC- C Printer Default Printer Printer Port USB Print Processor winprint Availability Always Priority Duplex None Print Quality dpi Color Status Unknown Virtual doPDF v Printer Port DOP Print Processor winprint Availability Always Priority Duplex None Print Quality dpi Color Status Unknown Network TOSHIBA e-STUDIO L Printer Port WSD-d c ae - f - cb-b - b b Print Processor winprint Availability Always Priority Duplex None Print Quality dpi Monochrome Status Unknown So I am at work doing my normal tasks when Microsoft Word freezes It becomes unresponsive and is forced to end process After starting it back up again I get a strange error message quot The printer has not yet responded but the Microsoft Office program may be able to proceed without printer information Do you want to wait for the printer quot Clicking yes causes the program to become unresponsive again Clicking no causes it to go back to normal except when I try to print it brings up the default print dialog with no printer selected When I try to select ANY of the printers every single choice will cause the program to freeze and become unresponsive again So I took some steps to try to troubleshoot after looking around online but did not find much help I tried not in order -Uninstalling all printer drivers and reinstalling them -Disabled and re-enabled Printer Spooling service -System Restore -CCleaner - clean-up amp registry repair -ComboFix -Changing default printer to local amp virtual printers -Installed Office instead won t even start-up due to printer issue The weird thing is I can print fine off of programs like notepad mspaint wordpad etc and test pages all print out fine too However certain programs like Thunderbird Chrome NitroPDF any Office program etc all freeze up when I try to print I m hoping someone might have some insight on how to fix this Thank you nbsp
First, quit all programs. Use cmd->notepad to open a new text file, type some gobldee gook on 2-2 lines and <ctl>p to print it - - DOES IT?
If so, the print driver is fine and so is the system - - MS Word needs to see a new default printer.
On my Apple IPod, my home button is like stuck down, it will not work no matter what type of pressure I apply. Am I screwed? or can it be fixed(take to apple store maybe)?
take to apple store maybe?Click to expand...
at least talk to them
I am having problems with a delayed keyboard and a mouse that lags and won't click properly. Sometimes it won't click at all, other times it clicks and the computer won't register that it's clicking.
I have run all test to ensure it is not a malware and was directed to this forum for assistance.
Seems like your computer is slow. Open up Task Manager and show us the Processes tab, ordered by descending CPU usage.
Hi guys this is my first post have just finished putting together my first pc - when I turn the pc on the lights are flashing fans are spinning I do not hear a BEEP however keyboard and First Build Problems mouse lights are on as expected The problem is my monitor is not connecting to the pc quot Signal not found quot is the message that appears on the monitor before it goes into sleep mode I cannot see the BIOS and therefore cannot install my Windows OS The following is the list of components in my pc build - Asus P -I H Motherboard - Intel i - LGA CPU Ghz - Corsair GB Vengeance DDR - Gigabyte ATI HD - Western Digital TB SATA - W Corsair CX PSU - Windows -bit I have tried using VGA and HDMI cables I have tried using different First Build Problems monitors which First Build Problems have worked fine when I tried connecting them to my laptop Therefore I determine there must be something wrong with my pc but I cannot pinpoint the problem Any ideas or suggestions will be much appreciated Cheers nbsp
Double check all connections on your board. It's not hard to miss a cable and forget to plug it in. It also isn't hard to plug some cables into the wrong spots on the MOBO. Make sure everything is secure and in the right place.
Hi I am having some issues with my PC and would really appreciate any insight First off my setup CPU AMD Phenom II X rd core unlocked with Crossfire Problems 5770 ATI HD Performance CPU-Z says it runs at Ghz under full Problems with ATI 5770 HD Crossfire Performance load Memory Gb DDR Video Two Sapphire Radeon Problems with ATI 5770 HD Crossfire Performance HD GB -bit GDDR cards in Crossfire the nd card was added maybe a months or so after getting the first one this goes to my receiver and Problems with ATI 5770 HD Crossfire Performance my TV running at x Mobo ASUS M A TD EVO AM with PCI-e slots x x HD My main one where my Steam files are is a WD Caviar Black TB rpm OS Windows Catalyst Control Center CCC v hardware info shows both the primary and linked adapter primary running at PCI-e at x the linked card running at x I just updated from CCC or and I have had Crossfire enabled every since installing the second card With CCC and every previous version of CCC I ve had about of the time when I booted up from shutdown I d have to go back into CCC and re-enable Crossfire for some reason it would be disabled on restart more often than not I ve only had for a day now and I have not yet shut down my PC My main issue is basically I have never really noticed any difference from running in Crossfire vs running one card when gaming Crysis BF Portal others I think I am fooling myself into seeing a difference but sometimes I would start up my system start gaming and it seemed normal then remember that I didn t check if Crossfire had been disabled so I would recheck and see it was disabled and so I would renable it and then go back to gaming and not really notice a difference Does that make sense And sometimes it would even seem worse So I bought Hitman Absolution on Steam not pirated and noticed that it had benchmarking which I ve never done These are my in-game settings Resolution x Fullscreen checked Refresh Rate VSync checked MSAA x Exclusive Fullscreen checked Aspect Auto Quality Custom Shadow Medium Texture Quality Normal Texture Filter Anisotropic x Reflections Medium FXAA checked Global Illumination unchecked Tessellation unchecked Level f Detail Medium Depth of Field Medium SSAO Normal Bloom Normal With my previous version of CCC my FPS averaged around but I didn t write the exact numbers down I went to the AMD website and saw a new CCC version and the new CAP with Hitman Absolution I uninstalled all previous CAPs and ran the installer to remove my previous version of CCC Then I rebooted made sure display drivers were all uninstalled and installed I ran benchmarks with Crossfire on and off then installed the new CAP and ran benchmarks with Crossfire on and off each three times quot A quot quot B quot and quot C quot Here s my avg FPS Crossfire Enabled no CAP A fps B fps C fps Crossfire Disabled no CAP fps fps fps Crossfire Disabled CAP installed fps fps fps Crossfire Enabled CAP installed fps fps fps So it almost looks like my best settings were with Crossfire disabled and no CAP So Why I mean if I enable Crossfire and I do what AMD suggests and use the latest CCC version with the lates CAP I get - fps I am not too technically inclined so I was thinking I either have a faulty nd card although CCC says it s linked or my x PCI-e slot is slowing everything down or I really don t know If you have any ideas suggestions please let me know nbsp
Try clean installing the drivers.
1) Uninstall the current drivers with this tool: http://sites.amd.com/us/game/downloads/Pages/catalyst-uninstall-utility.aspx
2) Then reinstall the 13.4 driver after you have uninstalled previous versions with the tool above.
I never go it, what exactly is CAP? Also, isnt it bundled with the drivers now?
I've been having these problems for maybe 3 days. First thing was it took longer for my computer to boot up now whenever I finally able to logg in either my icons on my desktop disappear with my start menu and the appearance of my start menu and other stuff from computer look like they are in safe mode is there anything I can do to fix my computer. I can't back up my computer to a time where it was working perfectly can anyone help me?
Download Malwarebytes: http://www.techspot.com/downloads/4716-malwarebytes-anti-malware.html and run a full scan. Tell me the results and post the scan log. This will determine if your PC has an infection.
What antivirus do you use? Can you post your system specs?
Hi, I have been having some technical difficulty's lately with my Acer ASPIRE's monitor. I will be watching a video, doing work or making one of my games when my monitor will go to black-and-grey lines. So far, the only way to postpone the problem is (Once Problem has occurred) to hit the CTRL-ALT-DEL keys, which will bring to the Windows 7 Options Menu. Then just close that... But it will happen again and the fix is rendered useless I then have to restart my laptop. Any ideas? Please comment!
I think this may be a graphics card issue. Please tell me your system specs (CPU, Graphics card, OS - 32 or 64bit).
Hi Guys im having problems with my laptop my warranty has expired so i cant send Dell m1530 XPS problems it to dell to get fixed and also im in college so i really need to get this fixed fast the other night i was shutting off my laptop when a blue screen appeared i didn t get to see what it said the next day getting ready for home work i turned on my laptop as usual but this time it took almost minutes for it to start loading after loading instead of showing my my log in screen Dell XPS m1530 problems to put in my password it stays a black screen and my mouse appears after - minutes i have trying doing ctrl alt delete but no luck i have removed the battery for seconds no luck tried only using the wall cable to turn on and still nothing my laptop did always tell me the battery needed to be changed i was wondering if this is the problem or is it time to get a new laptop like i said college student money is tight since my boyfriend is the one paying and i dont want to make him spend money for nothing thank you for your time nbsp
This could be one of several problems, but assuming you can't get to your Vista desktop anymore, (is that right?) when you power on the pc, tap away at the F8 key, quickly, and straight after pressing power button.
Do you see a blackscreen with white text? If yes, scroll down with cursor key to the line 'Use last known good configuration' and press 'enter'.
But without knowing any more, your problem could be, a faulty RAM board, (5 minutes to swap in a new one, and not expensive), or a failing Hard drive, not good, or other main circuit board problem. It's not so likely to be the battery though, but try the F8 key (Safe mode) idea first.
Hi folks, I'm having problems with my wireless connection on my desktop computer and I'm really stuck! The signal regularly drops to 1 bar and the speed will fluctuate anywhere between <1Mbps up to 11Mbps (although it's usually at the lower end), and sometimes it will lose connection with the router all together.
I've used a Belkin USB dongle and more recently a TP-Link PCI Express card, both N150. My router is a D-Link N150. Both the dongle and the adapter have had the same issues. In comparison, my Lenovo Z570 laptop and before it got destroyed my housemate's HP laptop had no issues, which basically leaves me with just my PC as a possible cause or some sort of setting somewhere.
Motherboard: Asus P7H55-M LE
OS: Windows 8
If anyone has any ideas I would be really grateful!
Does your router have a password? Someone could be stealing bandwidth.
Hi all, I have monitor gericom 2030 and it has some power board model that I cant find on sell, so I have buy one that is almost same with it. 4 plugs for invetors are same but one connection for t-con board is diffrent and on oroginal board I have pins (5V, 5v, GND, GND, 12v, BL, N/F) and on board that I have buy has ( 12v, 12v, GND, GND, 5v, 5v, GND, N.C, ON, DIM, MS ) So any suggests wich on wich one I should connect?
Guys,I have some question about ram.Motherboard Gigabyte b75d3v.
Here is the questions:
1.What if I use 16 GB ram of different brands such as A-Data 4 GB ddr3 1333mhz,Corsair 4GB ddr3 1600mhz,Transcend 8GB ddr3 1333mhz will it hamper my gaming time??
2.What if they have different cas lantency???also different mhz or same mhz but different latency?
Using different memory brands and speeds have a greater chance at causing problems. It is always recommended to use the same brand and speed modules for compatibility purposes. If you choose to mismatch your memory modules, I'm fairly certain you will do so on your own. I highly doubt anyone will step in and give a good word about mismatching memory.
If you seriously have need in 16GB memory, get a matching set. I have 8GB in my machine and hardly ever see usage over 4GB. If I was to need more memory for some specialized reason, I'd make certain it was a matching set.
Hi all got a toshiba satellite p200-1ee and my sister used it one night for karaoke .anyway after people in pub was helping her load van and 1 brought out laptop rested it against the speaker and it fellthen when moving van .. ran straight over the laptop yes I know what ***** put the laptop standing next to wheels.. well not laptop few cracks here and there screen is damaged .. PROBLEMS laptop no screen even when plugged in external monitor also power light flashes blue twice and orange twice ..all the bottom and top looks fine just plastic cracked round sides dvd opens and shuts normal any help to y light flashing and y no screen even with external monitor .. thanks
Does it make any noises when you turn it on?
Hi guys, I have a Problem, I bought a Creative A520 a while ago, And It was woeking fine. And then all of a sudden, Sub woofer makes a noise that sounds like a Plastic bottle Crunching up; So I turn bass down and it seemed alright. And then it started being Intermittent, and randomly working while I listen to music (The bass is turned right down)
Techy Details :
Laptop I use is a Lenovo R61 with Linux running on it.
Either the speaker or the amp inside the box is probably broken or breaking. I'd check the surround and see if it's cracked or separated from the cone.
I have a Sony Vaio VGN-FZ18E which is experience some major problems at the moment.
Firstly, I get 'nvlddmkm' problem about every 10mins or thereabouts which causes the screen to lock, go fuzzy, blank the screen and then revive and become functional again.
This can eventually, or straight away, lead to a total fuzzy screen lock-up where I simply have to hit the off button to restart the computer.
This is also interspersed by various other screens such as those below; mixed pages, blue screen, which seem to have come from the Matrix.
The computer is about four years old and the front left of it can get very hot.
Is it just knackered?
Would a re-format and re-install do the trick?
Any ideas or solutions?
The Nvidia graphics chip on the motherboard is probably over heating. The CPU/GPU cooling port may be clogged with dust or the thermal pads or paste need to be cleaned and replaced
I received my new SDD today and installed Windows on it After I was all done installing all drivers and updates I plugged my slave drive back in that contains all my media At first when I would boot into windows I was getting a quot recycle bin on E is corrupted quot message and the slave drive kept on connecting and disconnecting while in Windows I decided to boot into my old installation of Windows drive serious having Slave problems that is on my old mechanical drive I can access the files on the slave drive but the drive tends to hang a Slave drive having serious problems lot and it won t let me copy any files off of it I ran a chkdsk f that finished but when I try to run a chkdsk r it gets stuck on stage I am really hoping that I do not lose any of this data as it is not backed up I was waiting on this new SSD to I can back it all up and now it seems I can t If anyone could help me with this it would be appreciated I really hope this drive is not dying on me nbsp
Probably a failing disk. Try different IDE/SATA port or different IDE/SATA cable, make sure they are securely connected.
So I bought a new CPU installation problems CPU an AMD Phenom II x socket AM absolutely not AM which I read was compatible with my AM socket GA-MA X-UD P a Gigabyte brand board So I tried installing it and when it booted up it got to the BIOS boot screen CPU installation problems I think its called a Post screen and it either sits there or restarts itself in perpetuity I let it sit there doing that for about minutes to see what the problem is and it seems that particular CPU was only compatible after a BIOS update So I throw the old CPU back in download atBios and the update install put the new CPU back in but it hasn t really made a difference at all still sits at the BIOS boot atBios says the BIOS is up-to-date and there isn t anywhere in the BIOS itself to confirm that so the mobo and CPU should be friendly with eachother I want to know if there are any other factors I need to know or I ve skipped when doing this I thought it was a simple process of swapping them in and out but if there s more to it or my computer isn t up to scratch in some way I was hoping for some answers and maybe a solution Other specs Windows Pro x w PSU Gbs of Mhz DDR Corsair RAM Nvidia GTX My old CPU which I have running is an Athlon x Thanks in advance nbsp
You may have to upgrade your power supply to 650 watts or so...
A little history of the laptop: I bought the laptop used from a friends and All the keys work except "O", "L" and the period. I bought a brand new replacement keyboard and those buttons worked fine, for awhile. I finally bought a new Wwindows Vista cd and installed it on the laptop, since it was supposed to have Vista and it had XP for whatever reason. Still nothing, when I unplug the keyboard ribbon and plug it back in, the keys work for a while and then stop. Any answers are greatly appreciated.
Probably a defective or worn motherboard keyboard connector...
On my laptop upstairs, it says it's connected to the internet but at random times, it will not allow me to load any web pages, and during other times it will be completely fine. I've gone downstairs and used my parents laptop and the internet connection on it is perfectly fine. Any reasons why this is happening?
Hanson Duan said:
On my laptop upstairs, it says it's connected to the internet but at random times, it will not allow me to load any web pages, and during other times it will be completely fine. I've gone downstairs and used my parents laptop and the internet connection on it is perfectly fine. Any reasons why this is happening?Click to expand...
How are you connected on your laptop upstairs? wireless or DSL? If wireless,it could be due to walls & floor(s).
I ve managed to get my hand in a Jeantech watt modular PSU The only problem is it didn t come with any cables except data power cable problems PSU although the mobo and CPU power cables are built in All the connectors appear to be pin so I was thing of getting some of those connectors PSU problems that turn two Molex connectors into a pin PCI-E and just using it in reverse for powering fans e c t Would this work will it damage anything On another note I put the PSU into the PSU problems case and connected it to the mobo there s no CPU yet and I can t get the system to turn on I tested if the PSU was duff by shorting a ground pin and the green cable on the mobo power cable and it worked So its either a duff mobo or wired it in wrong It s also worth noting that the PSU isn t connected to anything but the mobo I don t know if that changes anything Any help would be really useful so thanks in advance nbsp
Not entirely sure, but I don't think the PC will boot without a CPU?
Ive only had the privledge (and by that, I mean, enough money) to build a single CPU (with my brother, it was his) in my life. I recall it has (still works apart from mobo, only recently replaced) a intel core 2 quad. I see people talking about bent pins and stuff on CPUs, but I dont remember pins being on the core 2 quad. that was the easiest part I recall, just literally placed the chip in the socket (the heatsink, that was a headache). I dont recall any pins. Are pins literally pins as in thin rods sticking out of the bottom, or what?
Most modern CPU's (Intel at least) no longer have pins on the CPU, but instead the pins are on the socket.
The newer socket 1155 and 1366 (and 2011 for that matter) are just like the Socket 775 you are experienced with the Core 2 Quad you installed, just slightly larger sockets.
It is still very possible to bend pins though, but in this way, you damage the motherboard (with the CPU socket) vs. the CPU. You must be careful when inserting the CPU since dropping it on a corner into the socket CAN bend and damage pins.
So if you've built a system with Socket 775/Core 2 Quad, you should have no problem with Core i3/i5/i7 and newer Intel sockets if this is what you plan to do. Everything is basically the same... just slightly different socket and DDR3 memory vs. DDR2, which are also very similar and just snap in the DIMM slots similarly.
I hope that helps! Good luck!
I got a M5A99x Evo Re2.0, brand new board and the audio from the rear doesnt work at all when I plug the pink and green plugs. I have an HDMI connecting from my TV to my Gcard, I get audio through the TV but cant seem to get those jacks working. Ive used two different headsets to see if it might have been the headset itself. im really stumped.
Have you gone into the sound menu in your control panel and set your default audio device to your headset?
If, under the "playback" tab, the HDMI output is ticked, then this is the problem.
Just click on the correct device(It should either list your headphones or say "high definition audio", or something similar) and then click "set default".
This should solve the problem.
I have had my laptop for nearly 3 years but I wouldn't deem it to be a poor performance laptop. Recently I have been getting slow internet, poor keyboard response and slow scrolling, and it is very frustrating!!! I share the BT 3 homehub with good connection speed which was checked and found fine! My housemates laptop has started having the same problem as mine and I really want to fix this issue. The internet, keyboard and scrolling speeds vary everyday but overall are slow performers. I have looked through some of the threads and have seen people posting long threads of code etc :/ Is there anyone out there who has the time and patience to help me fix this problem? It would be most appreciated!!!
First, get us
make/model of all PCs
of the internet modem
and any extra router attached.
Is this a rather new ISP for you and/or are the PCs newish or older ones?
Did you every have good response? HOW long ago?
I recently bought a new graphics card, a monitor and a 600w power supply to support the graphics card. I also reformatted after installing everything, wanting my computer to be in the best shape possible. It works fine, managed to connect the DVI and get the screen working. However, after I downloaded the drivers for the graphics card and restarted, I was getting visual artifacts everywhere, and my screen was randomly going from blue to normal.
After uninstalling the drivers, everything was fine again. I tried the newest drivers, and the oldest. Still have the problem. The card doesn't show up in device manager or dxdiag, it only shows Standard VGA graphics adapter. I've tried plenty of things, but nothing works. Please help
So you have no video driver loaded other the default one and you're getting artifacts. It may be time to return that card.
I have quite a few random problems with my computer they might be related but I m not sure I bought this laptop off of my aunt and Major motherboard problems? it got new guts put it in motherboard and processor right before I bough it When I received it the clock didn t work but I didn t mind Major motherboard problems? The keyboard recently started acting up the quot B quot key typed quot VB quot and the quot N quot key typed quot MN quot also when you would hit the space bar the enter key would would go off at the Major motherboard problems? same time This would only happen on occasion though sometimes restarting the computer would work sometimes it wouldn t I thought it might be a virus messing with my computer so I ran my antivirus and did a system restore It worked for about a month then started back up again I took off and cleaned around under the keys to no prevail it still does it on occasion Someone told me it might be my motherboard Then my computer stopped connecting to wireless internet out of the blue I got on it this morning to a report from windows stating that it recovered from an error and it gave me these codes BCCode d BCP C BCP BCP BCP B F F OSVer SP Product I tried Google and it brought me here I have no idea if any of these things are related or what any of these codes mean Can someone PLEASE help me decipher some of this Thank you nbsp
It's probably not a virus, the first step I'd try would be to replace the keyboard.
Hi everyone This is my RMA story Every third ASUS laptop is DIFFECTIVE I had a custom Asus gaming laptop G JX- DE G JX from Xoticpc com I can t say I have it because it has already been in the Asus repair station for more than months and I don t know when I will get it back My RMA status is still the same quot Waiting- WB Wait for Material Spare Parts quot I emailed the Asus representative Mr Tien Phan email address deleted and got the response that the issue with my notebook was duplicated and it was currently at a repair station waiting for the necessary parts to come in Because of that I began to initiate some action and look problems quality Asus laptop RMA at what I could dig up If you look at the Asus website you will see that now it only has gaming laptops G VW and G VW but there were Asus laptop quality RMA problems a dozen different models in My friend s computer market analyst said that the Asus repair station is piled up with defective laptops transformers tablets Almost every third ASUS laptop is DIFFECTIVE Since Asus started to produce their own laptops in huge amounts though previously it was focused on the production of motherboard and other components The range of its products increased in many times They tried to compete even with Apple Zenbook Pads But the Asus team just can t compete with Steve Jobs team As a result the quality of Asus products begins to fall dramatically Asus Customer Service just can t cope with the avalanche of custom claims Unfortunately the quality of the motherboards diamond in Asus crown became worse Asus laptop quality RMA problems compared to what it was before I Asus laptop quality RMA problems built three rigs with Asus motherboards last one is P X D Premium and I am satisfied with their quality But now days are different Now we need to think seven times before buying an Asus laptop Having every third ASUS laptop DIFFECTIVE is too much pcbzick nbsp
I'd heard ASUS had quality issues but just figured that's people flaming online. Now I know better. I've had my laptop go out on repair twice for the same issue (screen flashes then blacks out). On first repair all they did was swap the system board and the issue reappeared almost immediatly. Call center staff would not agree to expedite shipping on second repair. When second repair was done they could not supply a tracking number. Emails to ASUS are answered by a bot. It's not so much that the device failed, that happens, it's the followup that is miserable.
I m in problems NEC/Sony drive DVD+RW 7173A with my the process of doing some backups but I ve hit a snag with my pile of DVD RW s DVD+RW problems with my NEC/Sony 7173A drive that has happened before I have an NEC Sony A cd dvd rom which will happily play shop bought DVD s will play pre-recorded music I can burn play data music CD s etc but I cannot view what I know to be on at least some of these DVD s and nor can I burn to them properly What happens is when I put one of these DVD RW s in the tray is that there is no reponse from the E drive icon in My Computer but it will open up a separate E drive window but with no data in it If I right click on the icon in My Computer and do Properties it says there is nothing there I have tried erasing and burning these DVD RW multiple times both with MS software and Nero and I get nothing The only thing that comes close is that for example in Nero I burn some photos it says everything has done what it is supposed to but when I go to view the contents I get all of the above One other thing when burning with Nero and it asks if I want to verify data on disc after burning and I tick the box it will abort the burn towards the end of the cycle If I don t tick the box then it will complete the burn but I will still have the same problems as outlined above Can DVD s just go wrong while other formats are much hardier Tom nbsp
Did you try opening these DVD+RWs on a different device, to check whether it is the disk that's faulty or the way that drive reads them? (I had a similar problem, but it was with all DVDs, the solution for that is here http://support.microsoft.com/kb/314060)
Recently this has come to light during my own research into mobile GPUs that are currently available on the market as I ve been considering replacing my aged i - M laptop with M GPU I had switching technology mobile graphics AMD problems... has "Enduro" even placed an order and paid for a machine but after reading much about the issue none of it from AMD themselves other than quot For those with M - Enduro issues are also being investigated quot by http twitter com CatalystCreator back on the th of August I cancelled before the unit was completed and shipped This is mostly a problem for Clevo EM EM based laptops which AMD mobile graphics switching "Enduro" technology has problems... have no way of bypassing the Enduro graphics switching unlike Alienware products which have a hardware switch Basically there is something very wrong with this immature technology Users are finding under utilisation of their cards for example Battlefield person multiplayer AMD mobile graphics switching "Enduro" technology has problems... fps dips with AMD mobile graphics switching "Enduro" technology has problems... lower recorded GPU utilisation when it should be going flat out Even worse is when the graphical settings are lowered to try and allow for more fps to be pumped out by the GPU the situation does not improve It is as if the Enduro tech is deciding that the lower workload required at lower resolution or graphical settings means it can lower utilisation further This means that someone with FPS issues at Ultra settings can drop to Medium settings and not see any improvement in output Threads about this http www rage d com board showthread php t http forums guru d com showthread php t http hardforum com archive index php t- html And many others Facebook awareness page https www facebook com Amd mEnduroUtilizationAwareness ref ts Many owners of systems with M graphics cards are now concerned with AMD s reluctance to comment on the problems that they are just going to try and sweep it under the carpet and move on to the next generation of GPU with the next generation of Enduro perhaps one that works No one is exactly sure if the problem is even something that can be overcome with a software driver or whether it is a hardware issue that the Clevo based laptops are stuck with nbsp
The silence from AMD on this is deafening. I honestly can't in good conscience recommend anything AMD related unless they get this situation fixed. The fact that they have tried to silence other manufacturers on forums says a lot. I would feel much better if they were just open about it and said what they are doing to fix the problem.
Basically, I have a laptop that, whenever I play certain games, I get about ten minutes of game-play, then it just shuts down like I had held the power button for so long. would like an answer to the problem, as I'm getting guild wars 2 this Sunday and want it to be playable.
Games it has shut down on:
games that it hasn't shutdown on:
OS: windows 7
processor: intel core i3 m 370 @2.4ghz
ram: 2GB or 2048mb
1 is your graphics card suitable for playing the games I would say on the said laptop go to google then type can you run it then click on link thise will take u to a site that will help determine the games you can play so once on there theres 2 drop down boxes in the 2nd box look for your games then click then after click on canurunit tab and wait then the system will tell you pass or fail and on what parts for instance it might say core i3 pass but on graphics it might say fail .. if passes on all then let us know and then can look further
I've never liked remotes on the cable, they get in the way and weigh the cable down when you're wearing the headset. For that reason I got the Logitech G35 which has a roller and some buttons on the earcup, and I can really recommend them. The Corsair Vengeance 1500 also delivers excellent sound. Haven't tried the Megalodon but have owned the cheaper Carcharias and was not very impressed - sound was very average and felt a bit flimsy.
Hi all this is driving me nuts Fresh windows SP setup Problems Server on 2003 reading USB HDD 2TB x Buffalo tb external USB hard drives It worked for me a few day ago with no problems I was able to read and write Yesterday I went to configure backups and this is what is happening Drive detected in device manager in disk manager comes up as basic disc with partition of GB but doesn t say NTFS and so has no drive letter when clicked Problems reading 2TB USB HDD on Server 2003 on properties getting error message quot The operation canceled due to an internal error quot If I try format partition diskman locks Problems reading 2TB USB HDD on Server 2003 up I can delete partition ok Tried creating a small Gb partition but still having same issue I can read USB memory sticks ok All hdds are behaving the same way on server All are perfectly workable on another computers W XP I have tried re-installing chipset drivers - didn t help The only major change I can recall since it was working - ESET Antivirus was installed but I don t think it could be a problem Please Help nbsp
Usually you will need a 64 Bit system to be able to read any drive with a total compacity of over 500 gigabytes. If possible I would suggest upgrading to Windows Server 2012 in order to fully take advantage of your TB drives.
So I have PCs My main rig that is as HD Sata seagate TB HD Sata Maxtor TB RAM DDR PC- MHz GB Corsair XMS DHX CM X G C DHX two GB sticks CPU QuadCore Intel Core i GHz MB VGA XFX ATI Radeon HD GB DDR MHz MOBO P P D LE Windows professional x And my old PC that is as CPU Pentium Hyper Threading GHz MOBO ASUS P V -X RAM GB DDR PC- VGA GeForce Booting DVD-ROM and problems FX XT MB DDR HD x IDE Seagate GB Windows XP professional x My old pentium was there leaning on the other room and my mother asked me to prepare it for her to use It s been a year since the last time I turned it on and as far as I remember it was working fine despite the huge noise that the power supply was making Therefore I decided to enhance it a little by replacing the shitty W power supply of the CLONE brand lol by the W power supply that came with my also shitty Satellite X-Blade k case that I hadn t used yet I also swapped my old VGA GeForce FX XT for the GeForce FX MB ddr that was from my brother s old PC and added two more RAM sticks of GB DDR PC- When I turned it on it made beeps and hang up then I read the motherboard manual asus P V -X that this mobo supports up to GB of ram but if they are pc- it can only support a max of two simultaneous sticks then I took one of the sticks and it worked but then it hanged up in the initial black screen saying quot NTLDR is missing quot I searched on google and found that it refers to a boot file Booting and DVD-ROM problems that should missing in windows and that could be solved using the repair function from the Windows XP CD The problem is that my Pentium hadn t a cd-rom drive then I d have to take the one I have on my main rig and put it on the old one I started to prepare the Pentium for that changing Booting and DVD-ROM problems the flat cable connections on the HDs so that left over one cable to connect on the DVD-rom that I would put there Before putting the DVD-rom there I decided to Booting and DVD-ROM problems try turn on the PC again after changing the cables just to see if I had connected everything right and now it gave a different error Now it showed a message that the date time of the bios weren t set to press F to run SETUP or F to load default values and continue I pressed F and to my surprise it not only worked but also went into Windows But while I was rooting around the folders there after one or two minutes it crashed then after resetting it went into windows again but crashed even faster than before and the third time onwards it began to get stuck on the initial black screen again giving these messages There are times when that line about overclocking doesn t appear but the rest yes Then I pressed F to load default values like I was doing before then it began to load and such but crashed before entering on windows I thought I d just connect my DVD-rom on it already and try to do the repair like it was asking before about the lack of the NTLDR so I connected it put the CD and went to do that but now it started to freeze on the screen that asks to push F or F not giving time for me to boot from the CD or anything And the strange thing is that the keyboard doesn t hang up because I press Num Lock and the LED on the keyboard turns on and off but even so the pc does not recognize the command of F or F to proceed on that screen and it don t go further than that As if that weren t enough when I returned the DVD-rom for my main rig it stopped working The bios doesn t recognize it it is as if it wasn t receiving power It is not listed on the setup screen of the CMOS and neither on windows not it open and close the CD door as it isn t working anymore From nowhere I tried swapping cables and everything but it is no longe giving sign of life It s funny that it even worked once before the PC start to freeze on the F F screen opening for me to put the CD but after that it died and I couldn t even get the CD back This problem of the bios unconfiguring alone and sending that message at the beginning I guess it s... Read morehttp://www.techspot.com/community/topics/booting-and-dvd-rom-problems.184664/
Hi basically I have a compaq c the screen was slightly damaged it had a HP screen problems laptop Compaq c300 couple of realy thin lines on the right hand side of the screen but still worked great I bought the same model cheap HP Compaq c300 laptop screen problems that had a good screen on it but had mobo problems it also had a much nicer palm rest touch pad so I decided to take the mobo out of my laptop and put my one into the nicer casing of the other one when I attached the screen back on it is showing a display like the backlight has gone I have swapped and put the old screen back on but it still just showing a very faint image like no back light I have swapped the invertors around the cables around reinstalled windows tried different ram hard reseting the machine stripping it back down to the mobo times to make sure there is no loose connections etc what could be causing this I cant get neither screen to work some please help also the laptop works perfect when attached to my tv via vga I thank you for any advice you can give me quot I am soooo tired and depressed because of this now but wont give up quot I will be back on later am london england time to check if there are any replys thanks alot nbsp
Any progress on this?
New system i K on Gigabyte Z X-UD H with Corsair H problems Ivy Boost Bridge Turbo and GBs Kingston Hyper X PC When the system is at idle the processor only runs at GHz It takes so darn long for the desktop to load It s like I m running ME with a Pentium The multiplier is set at even though the BIOS doesn t have a setting to adjust the idle multiplier speed and has it locked at The BIOS doesn t show it running at but at though I ve verified the speed Ivy Bridge Turbo Boost problems with different apps I can t figure out why it s doing that I finally said screw it and just shut off all the turbo boost crap It s now set with the FSB at MHz and the multiplier at so it s running constantly at GHz with vCore at v or v depending on who you believe for the sensor readings CPU-Z or Aida Is anyone else having a similar problem I wouldn t mind the turbo boost if it worked Oh ya word of warning for ivy bridge owners Don t just monitor the CPU temperature monitor the core temps as well The CPU temp can go up only C while you have a corresponding C rise in core temps At I m running at C at idle while the core temps idle at - C Haven t had time to sit down and seriously OC this thing yet to see what she ll do We ve been having a serious heat wave in L A the last couple of weeks nbsp
It's not a turbo boost, it's Intel Speedstep which lowers the multiplier (and hence clock speed) when idle to save power. If you haven't switched that off you'll find the CPU running at 2.1Ghz or so when idle (half of 4.3Ghz). It's not Speedstep which is slowing your computer's boot time, it's either because you're running a mechanical hard drive or have lots of programs set to run at startup (check msconfig), or both.
It started about a week ago I have a Cisco linksys e wireless router I must say it has connection Unusual problems wireless with router my been the best one I ve ever owned until recently Over the last week It has started disappearing I will suddenly lose connection for about - minutes until my network pops up again in wireless network connections This isn t just my PC Both laptops kindle and my smart phone all lose connection at the same time and have the same problem leading me to believe it is the router We have a mac that is connected via lan cable and it does not lose its connection to the internet when the wireless signal is dropped When ever this happens it Unusual connection problems with my wireless router s been about times now I goto check the lights on the router and everything seems to be normal IT says wifi is on and that it s connected to the internet This will happen about every hour until I go unplug my router ie powercable and plug it back it I will be free from this problem for about hours and then it will start up again It s getting really annoying please help me Like I said before it s like the wireless isn t even turned on it completely disappears from the available wireless connections Even when it comes back usually about minutes it takes another few minutes to connect to the internet My experience with this router is that as soon as I see it I am connected to internet btw I lost my connection in the middle of writing this nbsp
Set the router MTU to 1492 to stop packet fragmentation and reassembly
on my netgear, it is found on the WAN side configuration.
When the wired systems retain connection and yet the wifi drop periodically, we suspect
interference from external sources. Google for inSSIDer and run as admin. This tool
will show you ALL station (visible) SSIDs, the channel they are on, the band (2.4 vs 5.0 GZ)
and the encryption (if any).
Find your SSID and move to a channel which does not conflict with any others seen.
Hello all I have recently completely revamped my pc new mobo chip video 5.1 surround problems X-Fi and ram etc My problem is with the sound while trying to do anything on my pc During video games like metro wolfenstein doom crysis warhead and regular crysis and others I have issues with the sound 5.1 surround and X-Fi problems The music seems to be loud and audible but the gun shots voices of the other characters and other sound effects seem to be almost muted or barely audible Also most of the music or sound seems to only be coming from my front speakers at most times Starcraft on the other hand seems to me to be coming from all the speakers but only just the music of SC I have a Creative Labs external sound device and the Logitech z- surround speakers The x-fi is connected to my pc using the single optical cable The speakers seem to not be the problem as when i press the test option on the remote for the speakers sound comes out of each one that is listed on the digital display for the speakers However when I try to test the speakers using either the onboard audio software or the Creative Labs control panel the sound only comes from the front speakers Also on web pages like IGN when i play one of their inbedded videos the sound barely works or cuts in and out I know I am being wordy but i have tried everything i could thing of I have reinstalled the software for the x-fi over and over I have also adjusted my settings accordingly with what Creative Labs site has advised for those with the X-Fi I really am in need of help as i can not enjoy playing my games without being able to hear voices or sound effects very well I would be extremely grateful to any help that any of you can provide me Thank you nbsp
WOW, lot of help you got there. Well, I have the exact same problem, any updates?
I have a Seagate goflex desk 1.5tb that was working fine then suddenly is not recognised by any of my 3 computers or my tv or my dvd player. The leads are all connected fine you can hear and feel it trying to run but nothing happens. I have over 1400 movies on this drive Can anyone help me pls?
all good now I fixed it. don't ask how I probably couldn't do it again if I tried. just not going to touch it now.