Windows Support Forum

Upgrading motherboard/Ram/Processor question.

Q: Upgrading motherboard/Ram/Processor question.

My question is, Im upgrading my computer with a New processor (P4) Motherboard and Ram, I was wondering if you know for a fact that whether or not ill need to reinstall windows, or have my windows installation disk handy (Xp Pro)??

Thanks

Relevancy 100%
Preferred Solution: Upgrading motherboard/Ram/Processor question.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Upgrading motherboard/Ram/Processor question.

One can never be certain...

It depends...somtimes, Windows will recognize the change, and boot up normally, and sometimes it won't. For the best results though, you should reinstall Windows, and for even better results, you should format the drive first, then install Windows.

https://forums.techguy.org/threads/upgrading-motherboard-ram-processor-question.156548/
Relevancy 22.79%

As the title says , I accidentally cut a wire between 2 pins (or whatever they are called) and now my PC starts slowing down after 20-25 minutes when I open it. After I restart everything is back to normal but after 20-25 mins its the same again. Is there a way to fix the wire between them or I have to buy a new motherboard? (sry , my english isnt very good. I hope you understood what is my problem) the image is what im talking about ,(the red is the wire) ,I got the motherboard picture from google , so its not mine.
 

http://www.techspot.com/community/topics/accidentally-cut-wire-between-2-pins-in-motherboard.217587/
Relevancy 18.49%

I've done no overclocking, no advanced work whatsoever. Every time I try to google my issue, all of the solutions seem to be based around the person with the issue overclocking their system thus causing high tempuratures. This is not that issue.

On to the actual problem, my motherboard reports temperatures of 69c when running any program that takes any worthwhile amount of system resources (and some that don't), in particular, most games. CPU and GPU tempuratures seem far lower, around 30-40c. Assuming the sensor isn't to blame (and it isn't, if the feel of the case is any indication), are there any reliable ways to lower MB tempurature with simple BIOS and power settings?

Running an old F1a55-M (FM1) on Win 7 Home Premium, SP1.

EDIT: The motherboard idles at 47, which also seems high. I've changed locations for better airflow several times and wonder if I just flat-out need a larger case.
 

A:Question re: system temperatures

Fans running, dust?
 

http://www.techspot.com/community/topics/question-re-system-temperatures.217445/
Relevancy 23.22%

Hi . considering that I don't overclock , I don't wanna SLI , im gonna buy cpu I7 4790 4G - 32G ddr (8x4 quad channel) - Windows 10 64bit .What's the best gaming and cheapest gigabyte motherboard on the market ?
 

http://www.techspot.com/community/topics/gaming-motherboard.217380/
Relevancy 18.49%

Hey,
I recently decided I'm going to start using my old laptop again. I swapped the hard drive for an SSD and I'm quite pleased with the performance boost that got me. I am now looking for a ram upgrade from 2gb to 8gb.
I have a Dell inspiron n4010.
I went to crucial's website and did the system scan. The scan said that this would fit my needs.

Unfortunately, crucial doesn't ship to me. I'm forced to look elsewhere. I looked for something similar on another store's website. My question to all the experts out there is: will 2 of these work with my laptop and get me the 8gb of ram I need?
thanks for the help!
 

A:Quick ram upgrade question

Yes. The specs are exactly the same. Over the years I have used both Kingston and Crucial many times for memory upgrades and both are excellent.

You can also do a memory scan at Dell's own website. Just don't buy what they offer because they'll tell you to only buy genuine Dell memory blah, blah, blah. The Kingston will do you quite fine.
 

http://www.techspot.com/community/topics/quick-ram-upgrade-question.216718/
Relevancy 25.37%

Hi Guys! I hope you have the time to see this post and give me some suggestions on Upgrading my PC.

Bought all of these parts last June 9, 2014.
This is my Rig

Windows 7 Ultimate 64 (Service Pack 1)
ECS Elite Group Deluxe H87 H3-M 1150
i5 - 4570 CPU @ 3.20 GHZ
HyperX Fury 8gb 1600mhz
PSU 600WATS Cougar
Nvidia GeForce GTX 770 Twin Frozr 256mb 2GB GDDR5
BenQ 22" LED 1920x1080
HDD 1TB for Storage
500GB split this into half Disk C: has 250 where I install my OS at and Local Disk D: where I put my games/saved games.
PC Case: Ostrog Enermax

I mainly created this Rig for gaming.

I'm planning to buy an SSD soon, any tips? Already read the most budget SSD is the Crucial m4 ssd 128gb
Also thinking of upgrading my Motherboard. Also, if ever I'm changing my MOBO, do you guys think I need to change my PSU as well?

Thoughts/Opinions/Suggestions will be highly appreciated. Thank you!
 

A:Upgrading my PC. Need Suggestions

There is no gain using an SSD for storage. I would buy an SSD to transfer the system and applications to. Format the existing drive for a storage drive. That will give you the full benefit of the speed that an SSD will give you. Try some PC trans software. They do the job well.
 

http://www.techspot.com/community/topics/upgrading-my-pc-need-suggestions.216438/
Relevancy 22.36%

Elitegroup Computer Systems, better known to PC enthusiasts as ECS, may soon kiss the branded motherboard market goodbye. Sources familiar with the matter claim ECS is planning to exit the DIY board market due to shrinking global demand and increased...

Read more
 

A:ECS reportedly set to exit consumer motherboard market

Wow didn't even know these guys were still around I've not touched and ECS board since the athlon 64 days and even then I wouldn't buy one lol.

Not saying they were terrible but I've never been a budget system builder so their products have never appealed to me.
 

http://www.techspot.com/community/topics/ecs-reportedly-set-to-exit-consumer-motherboard-market.215774/
Relevancy 25.37%

Hey everyone Now I m no expert but I m fairly computer savvy however when it comes to hardware spec s I m clueless A friend of a friend helped me pick GFX Upgrading Card my hardware and I put together my current computer almost years ago It was a beast at first but after a month my gfx card kept crashing almost every game mins into playing Did some research turned out a lot of people were having issues with the same card For whatever reason I never bothered to or couldn t get a replacement Well now I m finally ready to do it and I was looking for some insight based on my current spec s what my best options would Upgrading GFX Card be I m running Windows Upgrading GFX Card bit This barebone kit http www tigerdirect com applicat mail- -WebletMain- -WEBLET SATSFY- -Satisfy Asus M A GTD PRO AMD GX CrossFire Motherboard AMD Phenom II X T GHz Processor Overclocked to GHz GB DDR MHz System Memory x MB -Watt Power Supply CoolIT ECO A L C Liquid Cooling System WD Black WD FAEX TB Desktop Hard Drive - quot SATA RPM MB Cache And the busted graphics card I m using http www tigerdirect com applicat mail- -WebletMain- -WEBLET SATSFY- -Satisfy EVGA G-P - -TR GeForce GTS SuperClocked Video Card - MB GDDR PCI-Express Dual DVI Mini HDMI SLI DirectX Fermi MHz Overclock to MHz Now don t get me wrong I m not expecting to play next-gen games at the highest settings or anything just something decent to hold me over until I eventually build a fresh PC I m not looking to spend more than - I ve always gone with nVidia in the past but I m open to other suggestions Any suggestions are appreciated thanks for your time nbsp

A:Upgrading GFX Card

Looking over your current video card were you in need of running dual monitors? Have you checked out NewEgg.com? They are always having deals of video cards.
 

http://www.techspot.com/community/topics/upgrading-gfx-card.215852/
Relevancy 21.93%

Since pure alcohol, for example pure Isopropyl alcohol and distilled water are supposed not to conduct electricity. What would happen if I dipped a turned-on PCB into it? . What would happen to a motherboard?
 

A:Would a PCB or motherboard be damaged if dipped into pure alcohol/distilled water while turned on?

OUCH ! Your assumptions may be spot on, but OMG why would one try this?????????

There's something called 'leakage' - - current flow when it's not expected.

I was working in an aerospace lab and the the EE had me perform an experiment because I said "the resistivity of the salt water was too low and leakage would trigger the device". So we got a bucket of salt water and dropped the device into the bucket - - precisely 30 seconds later (the designed timeout), the bucket erupted and salt water spewed everywhere [yes, the device was an explosive link].

The trigger point for the explosive was <500ma
 

http://www.techspot.com/community/topics/would-a-pcb-or-motherboard-be-damaged-if-dipped-into-pure-alcohol-distilled-water-while-turned-on.215856/
Relevancy 18.49%

I am planning on building a small form factor PC but it will need RS232. I don't know for sure if there will be room for an add on card for the RS232. Is there a usb to RS232? If so, will it work as good as an add on card?
 

A:RS232 Question

Check out this link: TRENDnet USB to RS-232 . I do not personally own one, but I have used them at my job and they seem to work pretty well. You may have a driver issue, depending on the OS you will be using, but for the most part it works.
 

http://www.techspot.com/community/topics/rs232-question.215588/
Relevancy 22.79%

Hello,
I had a dell optiplex 7010 (service tag# 3LLBSW1) computer.
I took the motherboard out of this computer and installed it into a new ATX case.
all went well now I 'm having problems connecting the front panel audio, power switch, reset switch, & HD LED)

the dell connector is different than the cables I got on the new case. can anyone please help me to figure out how to plug these cables into the motherboard.

thanks
 

A:Dell Optiplex 7010 motherboard

Attach photos.
 

http://www.techspot.com/community/topics/dell-optiplex-7010-motherboard.198629/
Relevancy 18.92%

As seen on this site, the previous USB 3.0 drivers were v3.0.4.65 for Intel 8/9 Series Chipset. On Gigabyte's website for the Z97 boards, they also list USB 3.0 v3.0.4.65 as the latest for their boards. Now my question is, why on Intel's Download Center, is USB 3.0 v3.0.4.65 listed as Intel NUC drivers? Intel forum staff claim that version is for Intel NUC only, but it doesn't seem that way.
 

http://www.techspot.com/community/topics/usb-3-0-question.214845/
Relevancy 25.37%

Hi need some help here plz so a while ago I bought my first PC that wasn t bought on a wallmart cooling and Need it's for upgrading PC my advise I wasn t very knowlegeable on the topic and my budget was limited but Need advise for upgrading my PC and it's cooling with some help from the vendor who is an enthusiast I managed to get something I was happy with and I m still happy I can play nice games and do stuff but I think it s time for some upgrading here are the specs of my rig CPU AMD A K APU MHz BLACK EDITION Motherboard ASUS A- XM A Memory KHX C D B G x Graphics AMD RADEON R GB DDR Storage SEAGATE BARRACUDA TB REF - Case power source COOLER MASTER ELITE PLUS EDGE W AF-B P Other Peripherals LOGITECH G MMO KEYBOARD GAMEPAD Operating System WIN So that s about it Because of limited budget I didn t bought any other fans or disipators so the case has open slots for fans two on top above the CPU and MOBO and one on the upper back the case came with a fan in the front for the hard drive and there is the fan from the power source the CPU and the graphic card but that s about it The front fan pulls air from outside and the power source pulls air from the case forgot to put it on image but back slot is where quot BACK quot label is So basically I want to put to use those open slots on the case mostly because I live on a stupidly hot country like C hot and I do have had one event where the CPU shut all down because of overheat basically went above C I would like some advise as to how to choose a good product that fits my needs and what should be the configuration of the fans since I have read that air input and output should be balanced or bad things happen Also I wish to upgrade other parts of my rig the RAM is no brainer just get a sister to my existing card however the graphic card is another story The vendor assured me that the MOBO CPU and power source were good enough so that I wouldn t have any bottleneck issues if I later decided to upgrade the graphics however I would like your opinion on what can I expect to put on that rig without having those issues basically what are the highest graphic card specs I can expect it to run without problems I do have a personal preference for AMD solutions so keep that in mind since intel stuff costs are way way too inflated on my country I also want a new HDD SSD is still on the list but right now I want more storage so what would be a good option for that the one I have was basically a default option but I would like to know if that s ok or I would be better of with something else finally what should I keep an eye on when purchasing a display in the store they all look good but then I brought my new samsung display home and dark bright scenes look awfull and it makes me sad thank you very much in advance for your time and help and apologies for the wall of text nbsp

A:Need advise for upgrading my PC and it's cooling

Well RAM should be no issue as to the fact your mobo can handle up to 32 gigs or RAM so another 1x8 gig should do you quite fine as long as the RAM matches CAS, voltage, DDR3, and speed; as you say "no brainer."

Go for an SSD and run your OS from that and utilize your hard drive for games. SSDs are coming down in price and it will make your load times so much faster.

As a fan of Cooler Master your case is fine. Here is a link to it from Newegg.com Seriously consider getting those fans and keep in mind that between intake and exhaust, exhaust is the more important of the two. Also, AMD chips run hot. http://www.newegg.com/Product/Product.aspx?Item=N82E16811119256 - check out the fan options under specs.

Honestly, the only thing to upgrade for gaming purposes would be your video card. But here is my question: Are you having any issues gaming with your current system? If not seriously consider an SSD.

As for your monitor Samsung makes excellent ones. Did you calibrate/adjust the settings? What connection are your using: VGA, DVI, or HDMI?
By the way, really nice system on a budget. You got good advice.
 

http://www.techspot.com/community/topics/need-advise-for-upgrading-my-pc-and-its-cooling.213856/
Relevancy 18.06%

Hi, Guys (And Gals) I'm attempting my 1st PC build and HAVE used the various online power supply calculators... however I'd like to hear some feedback from you all. No matter where I look online I always like to come here to be sure. My specs for the build are as follows:

MoBo: GIGABYTE GA-F2A68HM-H FM2+ USB 3.0 MATX
Amd A6 5400K 3600Mhz Blk Edt 1mb 65w Socket FM2


Video Card: XFX RADEON R7 240 2GB DDR3 LOW PROFILE
RAM: ADATA XPG V1 DDR3 1600 4GB

HDD: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G

I would really like to use one of the 350W or 400W power supply I stripped from my previous PC's. I'm thinking of hooking it to an HDMI or VGA projector eventually though (Haven't bought it yet) Can I get away with one of these and play a game like World of Warcraft? or do I need to order something like the
SolidGear 650W PS2 ATX Power Supply on Tiger Direct?

Thanks in advance for any advice & thoughts
 

A:1st Build Power Supply Question

Over engineer the PS;

Calculate the actual needed power,

add a fudge factor and

multiply by 1.5.
Then round up to the next commonly available size
 

http://www.techspot.com/community/topics/1st-build-power-supply-question.213326/
Relevancy 24.51%

Hello I m posting this question along with a PDF explaining what I d like to do in terms of upgrading my Toshiba Satellite e -a My questions are I One or more of my USB ports are USB How do I determine which are USB and which are high-speed USB II Is there any reason that my BIOS won t allow me to upgrade from my current TB HDD to a TB HDD I just bought and received in the mail III What s the best way for me to clone my current TB HDD onto my new TB HDD I have a number of Disk utility apps on my computer already but if you recommend something else I ll use it instead Once it s cloned do I have to do anything special in order to get it to work Or can I simply swap out the HDDs and it My Laptop Upgrading Satellite Toshiba e55-a5114 ll boot right up If I m planning on cloning my current Windows and putting some Linux distros on it in what order should I clone amp install IV Can I add more RAM to my laptop even though the official website about my Toshiba Laptop specifically says MEMORY GB Upgrading My Toshiba Satellite e55-a5114 Laptop DDR L MHz Memory is not user replaceable If that s just an idle warning how much RAM can this computer take What s the upper-limit to the amount of RAM How much would you recommend that would give a boost to speed but also inexpensive and made by a trustworthy V I m going to make this new HD HDD run multiple OSes including Windows and - Linux distros How much space should I reserve for each Linux distro s mountpoints If I make one partition and label it as home will all my Linux distros be able to use it I d really like to have quite a few different Linux OSes on this computer because I want to learn how to use it better Here s the link to the PDF with much more information about my laptop as well as all my questions about making this upgrade work as quickly and painlessly as possible http bit ly e -upgrade Thanks a lot Yours Ev nbsp

A:Upgrading My Toshiba Satellite e55-a5114 Laptop

koesherbacon said:





My questions are:

I. One or more of my USB ports are USB 3.0. How do I determine which are USB 2.0 and which are high-speed USB 3.0?Click to expand...

not hard, but mapping which slot on the box is v2 - v3 was my issue



II. Is there any reason that my BIOS won?t allow me to upgrade from my current 1TB HDD to a 2TB HDD I just bought and received in the mail?Click to expand...

that would work BUT you need a fresh install and don't forget the system drivers



III. What?s the best way for me to clone my current 1TB HDD onto my new 2TB HDD? I have a number of Disk utility apps on my computer already, but if you recommend something else, I?ll use it instead. Once it?s cloned, do I have to do anything special in order to get it to work? Or can I simply swap out the HDDs and it?ll boot right up? If I'm planning on cloning my current Windows 8.1 and putting some Linux distros on it, in what order should I clone & install?Click to expand...

This solves the prior question - - clone it. I would clone anyway possible and after the fact, resize the C: partition



IV. Can I add more RAM to my laptop even though the official website about my Toshiba Laptop specifically says ?MEMORY: 6GB DDR3L 1600MHz (Memory is not user replaceable)? If that?s just an idle warning, how much RAM can this computer take? What?s the upper-limit to the amount of RAM? How much would you recommend that would give a boost to speed but also inexpensive and made by a trustworthy?Click to expand...

not user replaceable means what it says - - it's sodered to the MB and there may not even be slots for memory



V. I?m going to make this new 2HD HDD run multiple OSes including Windows 8.1 and 1-4 Linux distros. How much space should I reserve for each Linux distro?s mountpoints? If I make one partition and label it as ?/home?, will all my Linux distros be able to use it? I?d really like to have quite a few different Linux OSes on this computer because I want to learn how to use it better!
Remember, you can only have FOUR primary extensions and within one you can have several Logical Prtns. Most Linux distros have a bootable CD to try-it before you install.
Saves lots of work and time Click to expand...


 

http://www.techspot.com/community/topics/upgrading-my-toshiba-satellite-e55-a5114-laptop.213526/
Relevancy 25.8%

I am currently considering upgrading my graphics card in my PC upgrading GPU my Considering I bought a pretty average prebuilt from best Considering upgrading my GPU buy It s an Asus M K AD M AD M AD M AD Specs http gyazo com ca f c d a ef a f http gyazo com b aa cf fc ec ea a fe http gyazo com d fd a c b b a cd f db http gyazo com a d c fb f e b e ad bb Considering upgrading my GPU a I ve been reading around about graphics cards and I know mine isn t a great one so I m considering upgrading but would like to know the benefits I would get out of it Also would I have to increase Considering upgrading my GPU my power source depending on the card and if anyone could name a few graphics card in specific that would be the best bang for my buck I would greatly appreciate that I mostly use my computer to play FPS games H Z CS GO Borderlands Call of Duty A lot of the times I will stream and record my gameplay for the fun of it and so I could go back and watch any exciting things that may of happened in my gameplay I usually monitor my CPU s performance while doing these task and my CPU usually ranges from - while streaming and recording in p at fps Sometimes I will downscale my resolution to about p and my CPU will be at about - Pretty much I am wondering how and what benefits will I have if I upgrade my graphics card and if I do upgrade my graphics card will it take some stress off my CPU nbsp

A:Considering upgrading my GPU

I think everyone is also gonna want to know your budget before giving a suggestion.
 

http://www.techspot.com/community/topics/considering-upgrading-my-gpu.213309/
Relevancy 18.49%

Hey guys,

I have question about backbone networks. Need Help!

If an organisation has 3 departments.

Key servers are in different departments ? so a user from 1 department X reads and writes to file servers in another department Y. And both users access mail from a server in department Z.

The traffic and broadcast storms originating in one department is causing bandwidth saturation in other departments.

The core of the network is slow and is unable to meet the response time requirements of various critical business applications.

What is the solution based on core technology design, LAN technologies and design solutions to address inter-departmental traffic issues?
Thanks!
 

A:Question about backbone networks

The traffic and broadcast storms originating in one department is causing bandwidth saturation in other departments.Click to expand...

major faux paux. Broadcasts should not go beyond the current subnet.

I would guess

you're departments are co-located in the same building
and all are on one subnet
For large companies per the above, likely the 192.168.x.y is insufficient and your lan is using a subnet like 10.x.y.z for ease of network administration.

Broadcasts should be limited to resource online/offline and contained within the network segment where the device is attached. Users / systems in HQ do not need the status of a printer going offline the the shipping department.

Suggestions:

segment the departments into unique subnets
then add static routes between them according to their need
eg: the company domain server would be needed by all (dept <-> srvr)
including the email and directory system.

FEW departments need access to the sales group or its data

You need to analyze the departmental workflow to begin this project, and implement one network change at a time.
 

http://www.techspot.com/community/topics/question-about-backbone-networks.213243/
Relevancy 23.22%

Hi guys

I have an intel DP55WB whitsburg a pair of matched 2gb sticks installed at the moment in slots 1 and 3 and nothing in 0 or 2.

I put a new 4gb stick of IBM ram in and get 3 long beeps and it keeps repeating. Everything goes back to normal when I take out the new stick. It happens in both slots 0 and 2.

Am I doing something wrong? With the new stick do I need to change the placement of my original ram?

Thanks!
 

A:New ram makes motherboard beep

This motherboard has support for DDR3 1333 /1066 MHz DIMMs. If you insert DDR3 1600 it probably will not work. Intel motherboards are famous for sticking to the specifications and not exceeding them. I own 2 Intel Motherboards.

I don't know if this is allowed but here is the Intel Specifications of the Motherboard.
http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dp55wb.html

Make sure you unplug the computer from the wall or the power strip before adjusting RAM DIMMS. All RAM is different. Normally you add it in Pairs to maintain the dual channel functionality. If you don't the RAM will slow down. It is not wise to mix and match different kinds of RAM. This can be related to capacity, latency, SPEED, voltage. Then some RAM may not work with other RAM due to incompatibility with the existing RAM. Some RAM may not work in your motherboard due to incompatibility with the motherboard. Some shorter DIMMS also use a different voltage and you cant mix different voltages. RAM is not just buy it and stick it in.
 

http://www.techspot.com/community/topics/new-ram-makes-motherboard-beep.212524/
Relevancy 22.36%

I get a bit jittery when I'm unplugging cable connectors (these images are just examples, I'm thinking of all types of connectors). What's the best way to safely unplug them?, pull from the cables or from the plastic case. What's your experience?. This pics are just a few examples of connectors. I'm posting this thread about any type of connectors. Thank you.


 

A:What's the best way to unplug laptop cable internal connectors on motherboard etc?

Many simply pull apart. Watch out for the ones with locking tabs though. I don't think you have anything to worry about as long as you take your time.
 

http://www.techspot.com/community/topics/whats-the-best-way-to-unplug-laptop-cable-internal-connectors-on-motherboard-etc.212863/
Relevancy 25.37%

I currently own a dell XPS 8300 with the following specs:

Processor: i7 2600 3.4 ghz quad core
RAM: 12 gb
GPU: AMD Radeon HD 6670
PSU: 460W
I am a computer science student and plan on using unreal engine 4 for some game development. I also plan to do some gaming over the next 4 months.

What do you guys think I need to upgrade, if at all? I don't want to spend too much money, I recently received a $75 gift card for best buy and would prefer to use that towards my purchase.

What do you guys think of the following:

ZOTAC GeForce 750 Ti 2GB

Diamond Radeon R7 250 OC 1GB GDDR5

ZOTAC GeForce GTX 750 2GB GDDR5
 

Relevancy 24.94%

AMD is poised to make quite a comeback if a leaked slide proves accurate. The slide in question details AMD's Zen core APU and Greenland HBM memory-powered graphics and arrives courtesy of Fudzilla.

Read more
 

A:Is AMD's 16-core 'Zen' processor real? Leaked slide provides details on stout chip

This chip looks amazing, and is certainly enough for AMD to make a huge comeback. I really hope this is true.
 

http://www.techspot.com/community/topics/is-amds-16-core-zen-processor-real-leaked-slide-provides-details-on-stout-chip.211380/
Relevancy 22.36%

Hello,

I have a HDMI cable for my monitor, with a nvidia graphic card...

but now I have a big doubt, I dont know if my motherboard's graphic card's imput is not working anymore or if its my graphic's card after a FLASHY BLACKOUT today...

my nvidia control panel is not working anymore... whenever I try using VGA or HDMI with my graphic card it doesnt show any sign in the screen... so im currently using my normal VGA motherboard's imput...

I tried using an old graphic card and its not working, I tested the VGA cable and HDMI cable and they are working perfectly...

yet, after I set the graphic card in the slot, the fan it start working, if I unplug the graphic card but leave the curent cable, it doesnt start the fan so I guess the motherboard's imput is working

so idk what's the problem here, I have all the drivers and everythign was working perfectly before the blackout
 

A:Broken motherboard slot or graphic card

Well... its too late and soon for expect an answer but...

I tested my graphic card in an old motherboard and it was working... it didnt load windows cuz of the diferent motherboard but connecting my VGA in my gpu worked, and the HMDI didnt work I guess because it need to be configured after windows loading etc
 

http://www.techspot.com/community/topics/broken-motherboard-slot-or-graphic-card.212639/
Relevancy 23.22%

So I made my first custom build pc recently and my specs:
Motherboard: Z97 GAMING 5
CPU: Intel 17-4790k
GPU: Gigabyte Geforce G1 GTX 970 4GB
Ram: 16gb ddr3

In my MSI software (MSI Command center) it goes around the 85 degrees when I play Battlefield 4 on ultra.
Is the motherboard temp the same as the CPU temp? and is 85 degrees too much?
I do use the stock cpu cooler.
Also I have a 200mm front and a 140mm in the back.
 

A:Motherboard at 87 Degrees?

Download HWiNFO64 and use this software to compare temps. Not saying there is anything wrong with the MSI software, but there is always a possibility that it is not reading the correct temps.
Also, do you overclock? Overclocking will affect the temps, especially if you are still using stock coolers.
 

http://www.techspot.com/community/topics/motherboard-at-87-degrees.212568/
Relevancy 24.94%

My current spec is:

Intel Core duo 2 quad @ 2.4 GHz
305w psu
AMD 7770 gfx card
4 GB ddr2 ram
64 bit win 7 home prem.

I mostly play WoW and other mmo's... I rarely (and wouldnt be too bothered if I couldn't play them till next upgrade) play games with super high requirements like battlefield, gta etc and have the option to upgrade my graphics card to a 750 ti tomorrow (can get a new psu if needed).

or should I wait till next week and get a I5 + new motherboard and ram + keep my gfx card... link to exact model - http://www.techpowerup.com/gpudb/b72/his-hd-7770-iceq-x.html

How would gaming be on a machine with the specs of:

Intel core duo 2 quad 2.4 GHZ
GTX 750 TI
4GB ddr2 ram
 

http://www.techspot.com/community/topics/is-it-worth-upgrading-my-gfx-card-in-this-situation.212087/
Relevancy 18.92%

Hey guys I was wondering if I bought one of these if it would work it s a dvi-d to vga adapter The site says quot the adapter only works if your computer AND your monitor both support digital and analog quot I bought a new GPU but now I can t connect my vga output VGA question to DVI-D from my DVI-D to VGA question tv to my videocard There is a vga port but it s already occupied for my old crt screen On my older GPU I had a DVI-I port so I used a DVI-I to VGA adapter to connect the tv But now I ve got VGA HMDI and DVI-D ports I don t use the hdmi on my tv because the input lag is terrible cheap tv So I want to buy this adapter to fix my problem but I ve read DVI-D is only digital I m kinda confused on this My GPU and tv both support digital and analog as the site requests so is this gonna work or is it just a scam This also made me wonder why the hell they don t just put DVI-I ports on all videocards it s supports both analog an digital Which is far more convenient than having only a digital signal or am I missing something here Thanks for reading nbsp

A:DVI-D to VGA question

I've also found this adapter/converter. It's more expensive but it looks more trustable than the 1st one I posted.
 

http://www.techspot.com/community/topics/dvi-d-to-vga-question.211374/
Relevancy 26.66%

Hi so I bought a PC about months ago and I love it It so far has been basically able to handle anything I can throw at it Though keep in mind I haven t tried that many strenuous activity though Keep Is PC? my GTA for good enough Processor 5 in mind Is my Processor good enough for GTA 5 PC? I am asking this question because I know nothing about PC s I bought mine pre made just picked a good but affordable one a friend said was good My processor is a Intel Core i - hq GHz Cores Now to my question Being a huge GTA fan I of coarse want to pick up GTA on PC when its drops So I checked the recommended Systems Specs and I seem to meet every requirement but I was unsure about the Is my Processor good enough for GTA 5 PC? Processor This is the recommended processor for play GTA on Pc Intel Core i - GHz didn t talk about cores Below are two links The one to my computer I want to play this game on and a link to the required system specs for this game As I mentioned Mostly want to know if my processor can handle it but It would be a great help as well if you could just check my specs and the recommended specs and see if everything fits or passes these recommenced specs Sorry If I offened anyone with just downright dumb questions as I said big Computer novice Thank you for your help Reccomended Specs http www game-debate com games index php g id amp game Grand Theft Auto V My Specs http www newegg com Product Product aspx Item N E nbsp

A:Is my Processor good enough for GTA 5 PC?

Check out the following website: Can you RUN It ; Follow the directions and it will tell you. Grand Theft Auto V is on the list of games to check your system against.
 

http://www.techspot.com/community/topics/is-my-processor-good-enough-for-gta-5-pc.211286/
Relevancy 22.36%

HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks
 

A:Safe to use ATX PSU on a motherboard with an EATX power connector?

EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
 

http://www.techspot.com/community/topics/safe-to-use-atx-psu-on-a-motherboard-with-an-eatx-power-connector.181034/
Relevancy 26.66%

Actually what happened is I opened my cpu to clean out any dust so I cleaned it and even cleaned under the processor with a dry cloth.but when I tried to turn on the pc when everything was arranged,a black screen with a paragraph of error is shown.turns off the pc automatically.
My motherboard is fine,it shows a green light in the extreme end.
My processor is working great.
Hard disk is also fine.
But still it is not turning onn. Please help.
 

A:Processor Problem

Did you happen to have disconnected the power cable from the computer and press and hold the power button to discharge any built up static charges before opening and cleaning inside the computer?
You mentioned you cleaned under your processor. Did you pull the processor from the motherboard or was it still attached when cleaning?
Did you re-check ALL wires and connections? Try disconnecting all cables (to motherboard, hard drive, optical drive, video card, etc.) and then re-connecting said cables, making sure they are firmly seated.
Any chance you can take a photo of the error message and post it here?
May I suggest next time do not use a dry cloth, because you can actually build up static charge within the cloth itself and you could have discharged the built up static electricity into (or onto) one of the computer components.
 

http://www.techspot.com/community/topics/processor-problem.210948/
Relevancy 22.79%

Current specs
Intel db75en
Intel i5 3rd gen 3450
Gtx 970 amp extreme edition
Samsung evo 120
PSU corsair vs 650
Liquid cooler h50 corsair

Currently they are on LGA 1155 mobo

I just killed my old motherboard
And now I am planning to buy i7 4790k

There are three motherboards I have in mind and all of them are asus z97 series based. Want to buy only asus..
Z97 A
Z97 k
Z97 c

I want to know that whether I should upgrade and get 1150 mobo and new processor or not!

(I have no plans to put dual gtx 970 bt plan to use secondary gfx card (gtx560) as phyx dedicated card)
If yes then
1. Which mobo I should go for and why?
2. Will the old h50 will be fittable on my new board or not!

Any new advise also appreciated!
Thank You
 

http://www.techspot.com/community/topics/motherboard-liquid-cooler-suggestions.210943/
Relevancy 26.23%

I have an Emachines D525 laptop. I have the specs listed below. I need help because feel that it could run faster if it was given a better processor to run on. I would like to know what processors I could upgrade to. Thank you!

Processor: Intel Celeron CPU 900 @2.20 GHZ, 2194 Mhz
RAM: 3.00 GB
OS: Windows 7
BIOS: Phoenix Technologies LTD V1.16

Anything else needed, please let me know!
 

A:Emachines D525 processor upgrade

You can change your hd for ssd at least 100 GB . Buy a case for external HD, and use the original hd of her machine, as the same external hd . replace the memory of 1 GB for a 2 GB . Your D525 will be very fast.
 

http://www.techspot.com/community/topics/emachines-d525-processor-upgrade.167686/
Relevancy 26.23%

Hi,
I want to learn how to manage ARM processor power management with LINUX (for example the Cortex-A53 MP Core).
Can someone recommend literature, a tutorial or web based information?
Thank you in advance
Manfred
 

http://www.techspot.com/community/topics/arm-processor-power-management-with-linux.210897/
Relevancy 23.65%

Hey Guys plz help me out in finding a Compatible MOTHERBOARD which can be upgraded further
Requirements
I have intel Q6600 Processor Core 2 Quad 2.40 GHz (4 CPUs)( I would like to overclock it)
Navidia 9800GT 1gb
Ram 4GB DDR3

I dnt knw if wifi and blutooth comes inbuilt in motherboad if ys thn also include them.
And also suggest a Compatible SMPS Socket(LGA 775)
 

A:Need a motherboard

What is your current motherboard?
 

http://www.techspot.com/community/topics/need-a-motherboard.209509/
Relevancy 18.49%

I'm looking for an inexpensive router, any suggestion? The current router is downstairs, I plan plugging it in upstairs to boost the wifi. TIA
 

A:Router question

ASUS and TP-Link have some pretty good routers.. Do you plan to have Consoles (Xbox One, PS4, Wii U) using the network?? If so just ensure the router will properly support it as some older models may not work well with them.
 

http://www.techspot.com/community/topics/router-question.208909/
Relevancy 18.49%

I am running Windows 7 Home Premium 64 bit SP1 AMD E 300 with Radeon HD 6310 Graphics.
I would like to be able to play a few of the newer PC games but when I try they seem to stutter and do not run smoothly.
Do I need to install a better graphics card? If so can someone recommend what kind I could buy and install without a high cost?
Thank you for any advice.
 

A:Upgrade question

The AMD E-300 (codename Zacate) is a dual core processor for small notebooks and netbooks. It offers a relatively powerful integrated graphics card and a single ...Click to expand...

It appears you have a portable device that likely doesn't have upgrade options. If your device maker doesn't list upgrade options on their website, you can likely scratch this idea.

Portables (Phones, Tablets, Netbooks, and Notebooks) are not designed with upgrading in mind. They are small and very limited with cooling capabilities. And most of the time everything is integrated in small form factors and can not be replaced.
 

http://www.techspot.com/community/topics/upgrade-question.209190/
Relevancy 25.37%

I currently have 2 x 4GB sticks to equal 8GB but I want to upgrade to 16GB total. Initially I was going to buy the same 2 x 4GB sticks again since I have 2 RAM slots spare, but then I read about dual channel/quad channel etc and basically want to know if it would be better to add 2 more 4 GB sticks, or buy 2 x new 8GB sticks. Thinking performance wise, the price isn't too different.
I have MSI Z77A-GD55 mobo, and my RAM is Kingston 8GB 1600MHz DDR3

Thanks in advance for advice
 

A:Upgrading my RAM, better to add, or replace?

For DDR3 there is no quad channel, either way would work fine, go for the cheaper.
 

http://www.techspot.com/community/topics/upgrading-my-ram-better-to-add-or-replace.208842/
Relevancy 27.09%

Hi there I ve been having issues with my PC lately and have been looking for a place to ask them I hope you guys don t mind Firstly my PC is awfully slow It isn t very noticeable until I play a flash game or something similar Instead of running like it should the speed is decreased dramatically - levels which take one minute to go through take me at least three Now I ve always known that my PC is slow but after seeing that it s that bad I ve decided to make an upgrade I ve tried to keep track of different components and the worst one appears to be my CPU At standby it processor? better need Do I a usually runs at around - and when I launch a browser audio editing software or a game Minecraft in my example it immediately Do I need a better processor? jumps to I m forced to keep my setting to a minimum for it to function The CPU I have is an Intel Do I need a better processor? Pentium GHz chip with GB of RAM usually at Do I need a better processor? around - even when busy I have GB of free hard drive space Also for two years now in the winter months my PC randomly freezes and crashes when running a high-demand program for a while I ve always shrugged it off to overheating my PC is right next to a radiator but now I m really starting to worry about permanent damage I really want to get this solved quickly if possible and would really appreciate any advice you can give So does my CPU need upgrading Or is it possibly my GPU My graphics card is ATI Radeon HD series and I believe it s dedicated though I m not exactly sure By all standards it seems to be good enough at least so I m blaming the CPU for now Am I correct Thank you in advance for any help -Mike nbsp

A:Do I need a better processor?

I think you are jumping the gun on this. You've mentioned the fact that the PC is next to a radiator so you need to put that right. Secondly, like a car, a computer requires some maintenance. You need to keep the inside of the tower clean using something like an air duster can. The hard drive needs to be defragged occasionally unless it's SSD. Do you run the Windows Clean up utility to reclaim wasted space? Programs starting up with Windows that you aren't using cause a further drain on resources. A free utility that can be downloaded called CCleaner makes it easy to check that out. As the hard drive fills up things slow down so are there programs you can uninstall or stuff you can save elsewhere? See if things run better after you've followed up these suggestions.
 

http://www.techspot.com/community/topics/do-i-need-a-better-processor.208009/
Relevancy 23.22%

I have a computer that I built and I am pretty sure the motherboard is going out on me... Any suggestions for a new motherboard that will support the parts I already have from my previous build?

MoBo - thats going out - : ASUS Crosshair IV Extreme AM3 AMD 890FX SATA 6Gb/s USB 3.0 Extended ATX AMD Moboo

Processor: AMD Phenom II X6 1100T Black Edition Thuban 6-Core 3.3GHz, 3.7GHz Turbo Socket AM3 125W Desktop Processor

Hard Drive: Seagate Barracuda 7200.14 ST3000DM001 3TB 7200RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive

Memory: G.Skill Ripjaws X + Turbulence II Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9Q-16GBXLD

Videocard: EVGA 02G-P3-1386-KR GeForce GTX 460 (Fermi) 2GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card

I built this thing around 2011 so any suggestions for something new that will work for me?
 

A:Motherboard for my build

Take a look here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007625 600158776
 

http://www.techspot.com/community/topics/motherboard-for-my-build.208651/
Relevancy 24.51%

I don t know if this is the right place to put this so I appologize So my current computer specs are - Intel core i - k - Gigabyte Geforce GTX TI BOOST - Corsair Vengeance GB of RAM - Asus card for Upgrading games evolve future graphics the and P Z -V LX mother board - Corsair Gold AX PLUS Upgrading graphics card for evolve and the future games Power Supply So for the past days I ve been looking around at different graphic cards and I narrowed it down to these three EVGA GeForce GTX SC ACX GB G-P - -KR - - Must wait month Gigabyte GeForce GTX Ti GB Windforce - Can get it right now EVGA GeForce GTX Ti GB G-P - -KR - Can get it right now Now obvious reasons the is most likely the best of the three but also the most expensive one I would like to know if it s worth waiting month and get the if not bottle necked by other components or get one of the s instead Current games I play are Dying light and the reason I need a new card is for future games such as Evolve Batman Arkham knight etc I want to be able to stay frames Other suggestion are very much appreciated Also if you could explain why I should get that card would be awesome nbsp

A:Upgrading graphics card for evolve and the future games

If you don't get the 980, you will only be kicking yourself later. That is if you are seriously considering it.

http://www.techspot.com/review/885-nvidia-geforce-gtx-970-gtx-980/page5.html
 

http://www.techspot.com/community/topics/upgrading-graphics-card-for-evolve-and-the-future-games.208598/
Relevancy 43.43%

Ok first I know this is the hardware section but because of the nature of my question this is the best place I feel it should go I am upgrading my motherboard Upgrading cpu question mobo and and CPU from Asus M A TD-V EVO USB Xtreme Design ATX AMD Mobo and an Amd Athlon II x Ghz to ASRock Z Extreme LGA Intel Z HDMI SATA Gb s USB ATX Intel Motherboard and a Intel Core i - K Sandy Bridge Quad-Core GHz GHz Turbo Boost LGA Upgrading cpu and mobo question W Desktop Processor Intel HD Graphics Now all hardware does work but my issue seems to be a software issue more likely than Win bit which I need to get a hold of the disc my brother has was a family pack thing Anyway my question is pretty simple I Upgrading cpu and mobo question hope Without doing a fresh install of Win bit is it possible in any form to get the new mobo and cpu working like maybe using the repair method or installing over the current installed win Os so I do not have to back-up a ton of data and re-install lots of programs Also is there Upgrading cpu and mobo question any other work-around that might help I do have a Tb external Hdd I plan to backup my C drive with either way but it would be great if I did not have to do a fresh install Again sorry if this is in the part of the forums nbsp

A:Upgrading cpu and mobo question

Just back it up, bite the bullet, and reinstall Windows to get things right. An intel mb is not going to work right with the AMD drivers installed.
 

http://www.techspot.com/community/topics/upgrading-cpu-and-mobo-question.208395/
Relevancy 18.49%

Hello, I was recently given a Dell Dimension 2400 from a friend. It had absolutely no upgrades, however I had old parts sitting around and I gave it a bit of an upgrade. I put in 4gb of ram (however found out it had only supported up to 2gb, so I had to remove a card) and added a Visiontek Radeon 9200 graphics card in. Now, I have two processors here that look like the might fit, but I wasn't sure. So, I was hoping to get a second opinion from someone who has a bit more experience with this than I do. I have two spare processors

one of them is a Pentium 4 3.00Ghz (http://ark.intel.com/products/27479...g-HT-Technology-2M-Cache-3_00-GHz-800-MHz-FSB)

the other is a Pentium 4 1.6Ghz (http://ark.intel.com/products/27424/Intel-Pentium-4-Processor-1_60-GHz-256K-Cache-400-MHz-FSB)

Would either of them work? Also, would upgrading to windows 7/vista increase the support for ram? Thank you.
 

A:CPU upgrade question

Socket details:

Pentium 4 3.00Ghz is LGA775
Pentium 4 1.6Ghz is PPGA478
That is two different architectures.

Specs for Dell Dimension 2400




Intel Pentium 4 that runs at 2.2 or 2.4 GHz
internally and 400 MHz externally, or 2.266, 2.4,
2.53, 2.66, 2.8, or 3.06 GHz internally and 533 MHz
externally.

Intel Celeron that runs at 2.0, 2.2, 2.3, 2.4, 2.5,
2.6, or 2.7 GHz internally and 400 MHz externally.Click to expand...

Please note this would be PPGA478 architecture not LGA775.

What CPU is currently in the computer?

.
 

http://www.techspot.com/community/topics/cpu-upgrade-question.208387/
Relevancy 41.71%

Greetings. I have an Asrok Z77 Extreme 6 Motherboard.

I currently have an I5 3570K in there. I believe my Mobo is LGA 1155.

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.

Not sure if I will see any real increase in performance. I over clock the I5 to 4.2.

Any advice is welcome.
 

A:Question about my motherboard

Larsenex said:





Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.Click to expand...

Sorry, no. While your motherboard does have socket 1155, the processor i7 4790K is socket 1150. You'll need a new motherboard.
 

http://www.techspot.com/community/topics/question-about-my-motherboard.208311/
Relevancy 21.93%

Okay so I am starting this thread here seeing as how Clock and A10-6800K AMD Motherboard Wrong Setting Voltages Speeds the topic of the old one no longer applies to this situation I jumped ahead of myself trying to overclock this CPU which made me question the frequencies and voltages which are supposed to be set automatically by the motherboard I am having a tough time understanding all this I will post links to the exact AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds parts I am AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds using so whoever is keen enough to try to help will know what we re dealing with Motherboard MSI A X-G Gaming CPU AMD A - K Richland GHz Turbo Black Edition RAM Mushkin Enhanced Blackline DDR MHz PC V CPU-Z Screenshots After doing some AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds reading in regards to overclocking I have found out some details which are totally incorrect in my case For starters the FSB to DRAM Frequency Ratio from what I read is supposed to be some reported slightly higher ratios or something similar but CPUZ is showing which sounds absurd Also it s reporting the RAM as PC - at MHz and voltage at I haev Intel XMP enabled on the motherboard and the motherboard reports memory speed in BIOS at DDR- MHz Can someone analyze the above shot and information and clue me in as to what is wrong and what needs to be done I would really appreciate it because I am baffled I have no clue what the CPU-NB frequency and voltages are for so I don t want to mess with something I don t know anything about Anyway any and all help is much appreciated as always nbsp

A:AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds

Go into the BIOS and change the DRAM voltage to 1.60 or 1.65V and set the timing as u see XMP-2132
 

http://www.techspot.com/community/topics/amd-a10-6800k-motherboard-setting-wrong-voltages-and-clock-speeds.208183/
Relevancy 25.8%

Hi my name is Rafael of Brazil, rode a computer gamer very good, the settings I put down. My CPU is theoretically very good, but I can not play with it, the cooler that comes with the processor does not maintains the temperature when the BF 4 game with full graphics of 50 fps, but a few minutes later he shuts down and restarts in the middle of the game I think the manufacturing cooler's fault, because he goes from 100 degrees (HWMonitor), I will put an exhaust fan and I'm thinking about changing the cooler, am among the Hyper 212 EVO and H60. What would be better to cool off without the need for overclocking.
 

A:A10 6800k processor with factory cooler. Hyper 212 or H60

I would like someone to help me, which of these coolers is better. Hyper 212 EVO or H60?
 

http://www.techspot.com/community/topics/a10-6800k-processor-with-factory-cooler-hyper-212-or-h60.207197/
Relevancy 23.22%

Hello All I am having a bit of a strange issue that I have with CPU Motherboard or Strange issue never run into before Yesterday after getting home from the store I booted up my PC and started to play a game although I noticed that I was getting framerate stuttering It seemed to keep dropping a lot throughout my play So I started taking a look at some of my sensor utilities Strange issue with CPU or Motherboard When I opened Asus Probe II I noticed that it was telling me that one of my chassis fans weren t running Okay no problem it must have gone bad I than took at look at the frequency and noticed that my AMD FX- was only running at GHz per core I also checked CPUZ and had the same results So I booted to the bios just to take a look and noticed that it show my Chassis fan WAS running fine and that my frequency was at GHz per core as it should So I though that it must be a fluke Booted back into windows and again same issues So I shutdown and took the side off my case which is also where the Chassis fan it said was running is located Turned the computer back on and noticed the fan was running fine I logged into windows and noticed that seconds after windows logs in that one chassis fan turns off and the CPU underclocks to GHz multiplier All of the other fans in my case still running perfectly GPU running fine HDD s running fine Could it be possible that Asus probe II itself is underclocking my CPU If so what would be causing the fan to shut off My first thought was power-supply but I have no issues when stressing my hardware even in this state I am an IT consultant but have not run into this issue before Any help would be greatly appreciated PC Specs- ASUS m a r Motherboard AMD FX- CPU CoolerMaster HYPER N CPU Cooler Kingston HyperX Blu GB x Galaxy Geforce GTX Ti OC w PowerSupply Cougar Evolution Full Tower Case Samsung gb SSD Let me know if you need any other information nbsp

A:Strange issue with CPU or Motherboard

CPU temperature too high?
 

http://www.techspot.com/community/topics/strange-issue-with-cpu-or-motherboard.203184/
Relevancy 23.22%

Hi, I have a MSI g31m3 v2 s-7529 motherboard and wont turn on.
I change the power supply
I put on some themical paste in the cpu
I put away all hard drivers
but didnt work, only the fan turn on then its turn off
I think the motherboard dosent work.
 

A:Motherboard wont turn on

Please provide list of make and model for everything you have for this setup (CPU, RAM, GPU, Hard Drives, Optical Drives, Power Supply, Aftermarket coolers, etc.). We need to make sure that you have all compatible parts.
Also, have you tried to disconnect all things except the power supply connection to the motherboard, CPU & RAM and see if the motherboard starts?
 

http://www.techspot.com/community/topics/motherboard-wont-turn-on.208015/
Relevancy 22.36%

Wanted a gaming config ...
I have GCARD > NVIDIA GEFORCE GTS 450 (ASUS)
I NEED a good motherboard for gaming with intel core i3 4160.... 3.6ghz ,lga1150
my options are :
gigabyte/asus
B85 M D3H (or other b85 variants)
H87 M D3H (or other h87 variants)
H97
H81

all above are compatible but its really difficult 2 choose as the differences
even among same chipsets are too close(eg there are variants under same
h87)

all the above boards r in my budget!

games downloaded:
watch dogs ,cod(adv warfare,ghosts),max payne 3,MOH (warfighter),FAR CRY 4,ASSASINS CREED UNITY,Crysis 3 ,Dead Rising 3 ,Dead Space 3 ,GTA,LA Noire,Middle-earth: Shadow of Mordor,Need for Speed Rivals ETC ETC (thank god PIRATE BAY is up agn from COSTA rica)
 

A:Suggest motherboard for nvidia GTS450 & i3 4160 (gaming)

I would go for either the H87 or H97. It is really your choice in the end but all of the ones listed are good. ASUS, Gigabyte, and Asrock are all good board manufacturers.
 

http://www.techspot.com/community/topics/suggest-motherboard-for-nvidia-gts450-i3-4160-gaming.207743/
Relevancy 23.65%

Not sure if this is only confusing to me, but why are there so many different versions of X99 boards by EACH manufacturer?

I'm looking at Asrock, they have about 10 models: http://www.asrock.com.tw/microsite/IntelX99/

Then I'm looking at MSI and there are 6 models: http://www.msi.com/product/mb/#?category=Socket 2011-3&category_no=1179

SERIOUSLY, how to choose?
 

A:Which X99 Motherboard?

There are several ways you can choose a motherboard, but I personally look at the brand first before looking at features because some manufacturers are more reliable than others. I personally like ASUS and Gigabyte but ASRock and MSI are alright also. Now, onto features. There isn't really much you can differtiate between motherboards of the same chipset since most features are largely unimportant to the regular consumer. Usually the more expensive boards have more "features", whether relavent/important or not, is up to the buyer. I would check out this link.

If you still have questions, please ask.
 

http://www.techspot.com/community/topics/which-x99-motherboard.207791/
Relevancy 25.37%

My computer has an MSI Iona motherboard with an Intel Core 7 860 processor and 8 Mb RAM. It also has a NVidia GT230 video card which I would like to replace. Does anyone have any ideas?
 

A:Upgrading my video card

It appears that you have a PCI Expres x16 (2.0) slot, so any PCI-E graphics card will work. Check out this "best GPU for the money" article at Toms for suggestions at different price points. http://www.tomshardware.com/reviews/gaming-graphics-card-review,3107.html
 

http://www.techspot.com/community/topics/upgrading-my-video-card.207814/
Relevancy 24.51%

As stated above I have a Dell PrecisionT with Intel Xeon quad core processors E GHz I T5400 on on I need my the upgrading CPU's Precision Dell advice am running a bit version of Windows Ultimate and have GB of ram memory installed I recently I need advice on upgrading the CPU's on my Dell Precision T5400 had a hard drive failure so I replaced my boot up drive with a solid state of GB for a quick start-up and I plan to add another solid state drive for my frequently used software Then I will add a Western Digital TB drive for data and what not that I don t access very often maybe some movies and records etc the computer is I need advice on upgrading the CPU's on my Dell Precision T5400 set up for or hard drives and I already have the terabyte drive so why not use it I need advice on upgrading the CPU's on my Dell Precision T5400 I am pretty sure my power supply is about watt so I have all the power I should think I will ever need My main question is that I want to upgrade my CPU s and I don t know how high I can safely upgrade them I also want to upgrade my video card as this unit is dependent upon a plug in card it has no integrated video but I know that is a different section on the forum If I could get some advice on upgrading my CPU s I would greatly appreciate it I am afraid that I may not be able to get much more performance out of this model but my desires are meager I have found that I enjoy creating websites and blogs so I want to teach myself with the materials I can find online It is surprising at the free information you can get to teach yourself if you are only willing Please forgive me for going on I desperately need some advice on this upgrade if anyone could spare me a few moments to point me in the right direction Basically I need to know where to find the information on how far I can upgrade the CPU s and I believe the RAM can be upgraded to MB but I may not need quite that much I also need to find a good deal on a video card I know that is for another forum but I seem to get the worst luck when it comes to obtaining a good video card Please feel free to offer any advice I am sincerely grateful for any help Eric nbsp

A:I need advice on upgrading the CPU's on my Dell Precision T5400

I have a few computers and none of them come anywhere near yours so I'm puzzled that you feel any pressure to upgrade. There may be some interesting developments next year with Windows 10 and new hardware worth splashing out on.
 

http://www.techspot.com/community/topics/i-need-advice-on-upgrading-the-cpus-on-my-dell-precision-t5400.207724/
Relevancy 18.06%

This ink cartridge http://www.epson.com/cgi-bin/Store/jsp/Product.do?BV_UseBVCookie=yes&sku=T048120[1]

Is labelled as "T048120-S" on some online stores... others it's labeled just as "T048120"

What does the "-S" mean? single cartidge?
 

A:Question about Epson printer ink model #

Probably means standard capacity.
 

http://www.techspot.com/community/topics/question-about-epson-printer-ink-model.207580/
Relevancy 26.66%

Hello someone know if the I7 3820 is working with a graphic card pci-express3.0?
 

A:Processor compatibility

Check your motherboard specifications.
 

http://www.techspot.com/community/topics/processor-compatibility.207381/
Relevancy 25.37%

Hello

I'm really new to the tech/computer world, and know next to nothing about graphics cards. I was wondering if someone could help me figure out what graphics card I can upgrade my computer to. I have purchased the new Alien: Isolation game and would actually like to play it, I'm also ready to actually play a game smoothly without it freezing or lagging all the time.

Here's what computer I have so far as I know

HP-Pavilion

System Model: VD010AA-ABU p6126uk
Operating System: Windows Vista Home Premium (6.0, Build 6002)
Processor: AMD Phenom 9650 Quad-Core Processor (4 CPUs), ~2.3GHz
Memory: 4094 MB Ram
Graphics: ATI Radeon HD 4300/4500 Series
Chip Type: ATI display adaptor (0x954F)

now I know NOTHING about computers so apologies if the is any irrelevant info here or maybe even some missing please let me know

Thanks
 

A:Upgrading my PC for better gaming

Hey Darkeerantis what is your PSU (name and type or at least wattage). What is your MB (again name and type). How much free room you have in your case. What is your budget and desired performance.

Btw. your CPU isn't very powerful and the whole setup seems dated you might consider upgrading the whole rig.
 

http://www.techspot.com/community/topics/upgrading-my-pc-for-better-gaming.207396/
Relevancy 25.37%

I was given my prebuild gaming PC (gateway FX6840) as a gift a couple years ago and, while it runs fine, there seems like there is room for improvement. I was wondering what I should upgrade to increase performance, and I am pretty new to the PC upgrading world.
current set up:
ATI radeon HD 5700 series
8 GB DDR3
1TB HDD
intel core i7 860 2.80GHz
 

A:Upgrading pre-built PC

What is your upgrade budget (How much can you spend)?
 

http://www.techspot.com/community/topics/upgrading-pre-built-pc.207251/
Relevancy 24.94%

Yes I am aware that this desktop has a load of problems but Upgrading Gaming? an for eMachines ET1831-03 I am wondering if there is any way I could upgrade the power supply and video card for this specific Upgrading an eMachines ET1831-03 for Gaming? desktop I am not aware of what may or may not be compatible I have no prior experience with computer stuffs But I know the contents of the computer I am aware that there was a topic about this posted a while ago but the stuff suggested was I think retired The games I play are I will list them from most recent to least recent -Smite -Osu -Left Dead -Interstellar Marines -Minecraft -I have other games but I don t remember what to list All I want to do is basically have a graphics card good enough to play the latest games I don t care about exceptional performance or anything I just want to play in the right resolution with fps on low-medium graphics Now remember I m clueless so if I don t know what I m saying then just know that I m trying to explain myself xD Now lets see my budget is - If it s lower than or a little more than then it s fine Thanks Oh and I m Windows nbsp

A:Upgrading an eMachines ET1831-03 for Gaming?

Suggestions: Save money for building or buying a newer PC. You RAM is maxed out at 4GB (that is the motherboard max), which will hinder the performance of some games. Having 8GB of RAM is the "norm" for gaming now. If you want to upgrade a little now, and start saving money to get/build a better system later, then I would suggest the following:

Video Card - Your motherboard has a PCI Express x16 slot (Version 1.0), so to be compatible, I would suggest getting a 2.0 card - example: MSI GeForce GTX 650 Ti - $114.99 USD ($84.99 after rebate) from TigerDirect. I suggest this card because it is a well built card. It doesnt draw too much power from the PSU, but will still give you plenty of graphic power to play those games you listed at medium if not medium/high settings.

PSU - Ultra LS Series V2 500w - $39.99 USD from TigerDirect

This would leave you money to start planning a better build (which we can help with that when you are ready to do so).
 

http://www.techspot.com/community/topics/upgrading-an-emachines-et1831-03-for-gaming.207208/
Relevancy 18.49%

Hi all. So I was wondering if you guys had any opinions on gaming headsets for pc. My headphone jack for my computer isn't working so I don't think I can use any wired headsets (if I'm wrong on this please let me know). So I was looking into wireless ones, preferably $100 and under. The three I narrowed it down to were the corsair 2100, turtle beach px4 or 5 (from amazon or ebay) and the PDP afterglow kral. Anybody have any opinions on any of these ones or any other ones you would recommend? Thanks for any help on this!
 

http://www.techspot.com/community/topics/pc-gaming-headset-question.207127/
Relevancy 23.22%

I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp

A:Not a bad motherboard or PSU. Still won't power up

Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
 

http://www.techspot.com/community/topics/not-a-bad-motherboard-or-psu-still-wont-power-up.151315/
Relevancy 23.22%

A time ago I was plugging in to many USB devices at the same time. I had received a message saying that a power problem had occurred. Since then I have been unable to use the two ports, and I have looked up multiple guides on how to fix this. Nothing has worked, and I have run out of options. I do not have the disk anymore for the drivers.
 

A:Universal Serial Bus on MotherBoard

Just a note to any one, Keep the driver disk, not that would have helped, but there is always a chance u might need to reinstall the operating system.
 

http://www.techspot.com/community/topics/universal-serial-bus-on-motherboard.206796/
Relevancy 23.65%

Hello all

I have a HP Pro 3405 Microtower PC and I recently reinstalled Win 7 Ultimate.
Now I did a very stupid thing, I managed to install a DDR 2 1GB RAM on a DDR3 DIMM slot, don't ask me how but I did. There was also a DDR3 2GB RAM already there.

I quickly took out the DDR 2 and restarted the system, since then I've been getting 5 beep at startup which means "pre-video memory failure". I reseated the RAM, nothing changed. I looked on google on how to fix it but nothing worked.

I ordered another 2GB RAM from Offtek, same specs as the original RAM stick.
When I tried to install it today, it still was giving me the 5 beep code.
I've tried reseating it, resetting the BIOS, taking out the PSU... nothing >.<

Have I fried my motherboard? Or is there a solution I haven't tried yet?

Thanks in advance
 

A:RAM 2x 2GB on motherboard

If you have tried all that you speak of, sounds like you really messed up your motherboard. I don't think there's much you can do. Maybe if you know what form factor the motherboard is, you can replace it with one like it. If you don't know more then how to replace the RAM in a computer, I would not recommend going strait to replacing a motherboard.
 

http://www.techspot.com/community/topics/ram-2x-2gb-on-motherboard.205839/
Relevancy 22.79%

Hey guys, building a new PC, and I decided not to go too cheap with core components and leave the video card until later, while still getting everything in one go. Now this being the case, I will need to run non-dedicated graphics for a while (which are decent nowadays). Anyway, I want to go with the Gigabyte GA-F2A88XM-D3H Motherboard and an AMD A10-6800K Richland CPU,

Will the video outputs on the motherboard work with the APU and will I be able to use integrated video until I get a dedicated video card?

The Newegg page for the motherboard says "Integrated Video: None", so I am a little bit confused, is there no integrated video chipset because that's what the CPU is now being an APU?
 

A:AMD A10-6800K with what motherboard for integrated video?

I just built a home office build system for my parents using that exact board with an A4-6300 Richland in a Cooler Master HAF 912 (I really like this case for microATX boards). The board was great to work with and since the APU is on the chip itself my folks didn't need to purchase a video card.

So to answer your question: Yes you'll get your video.

* I would seriously consider getting an aftermarket cooler to replace the heatsink that comes with it.
 

http://www.techspot.com/community/topics/amd-a10-6800k-with-what-motherboard-for-integrated-video.205551/
Relevancy 23.22%

Hello I upgraded my cpu a while ago without checking if my mobo could run it.. worked fine on low usage but when I tried to stress the Cpu the pc died and wont boot/post. Is it the cpu or motherboard that takes damage from this? (Or both?)
I tried with my old cpu but with same result.
/ Andreas
 

A:125W cpu on 95W motherboard

Can you link us to your motherboard, your new cpu and your old one as well?
 

http://www.techspot.com/community/topics/125w-cpu-on-95w-motherboard.206146/
Relevancy 22.36%

Hi,
So I have noticed my pc would shut off randomly and its because the 24 volt connector wasn't in all the way so when the pc would move slightly the connector would disconnect itself. When I go to push the 24 volt in all the way it wont clip onto the clip on the motherboard. It will stay in but it wont fully go in and I can easily just pull it out or it will just fall out from movement. Any ideas how to fix this?
Motherboard- http://www.newegg.com/Product/Product.aspx?Item=N82E16813130741
PSU- http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026
 

A:24 Volt connector wont fully connect to Motherboard

I think it is not 24 volts. it is a 24-pin(also labelled as 20+4pin) , 12volts main power connector.
the slots are designed so that the power connector will slide into the slot to form like a 'lock and key'. to remove it.
see to it that the power connector is inserted in the right direction as shown in the pics (towards the side):


edit, any moderator: please delete this post.
(my second post to this thread is more 'presentable')
 

http://www.techspot.com/community/topics/24-volt-connector-wont-fully-connect-to-motherboard.206189/
Relevancy 18.49%

Hey, I wanted to update my cpu stock heatsink to something new sense this one sucks and I was gonna get
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103099
for my cpu http://www.newegg.com/Product/Product.aspx?Item=N82E16819113348
but I wasn't sure if that huge cpu heatsink would fit in my case, could anyone give me advice whether it will or not I am still new to building, Thanks!
This is my case - http://www.newegg.com/Product/Product.aspx?Item=N82E16811147166
 

A:Cpu heatsink question

You can try to use partpicker (needs a valid email to save parts list) to test your builds. a warning will show for any possible incompatibility.




https://pcpartpicker.com/parts/partlist/Click to expand...

based on newegg product, it seems able to handle 'full sized cpu coolers'




Rosewill Line-M
This review is from: Rosewill LINE-M Micro-ATX Mini Tower Computer Case, Dual USB 3.0, come with Dual Fans, Support up to 4 Fans, 12.5" card-Retail

Pros: Size, Appearance, USB 3.0 Front Panel. I own two of these one with fx8350 and one intel 4770 both with r9 280x gfx cards. Cable managment is tough but I expected that with the amount I packed into this form factor. Keeps my gfx cards around 70 degrees on stock settings. Fits full size CPU coolers. This is just about the perfect size for a computer case in my opinion.
Cons: bent the back panel slightly removing cut outs for PCI and PCIe mounts other than that no complaints really.
Other Thoughts: Get a modular PSU for this case.Click to expand...

based on partpicker:




http://pcpartpicker.com/p/Bb4TJxClick to expand...





Compatibility Notes
Unable to verify the Rosewill Line-M MicroATX Mini Tower Case and the Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler are compatible.Click to expand...


 

http://www.techspot.com/community/topics/cpu-heatsink-question.206154/
Relevancy 22.79%

Just bought a new board and I dont know how to get my geforce gts450 card working
 

A:New motherboard failing to show my card

Have you installed latest NVidia driver pack compatible with your operating system?




www.nvidia.com/Download/index.aspx?lang=en-usClick to expand...


 

http://www.techspot.com/community/topics/new-motherboard-failing-to-show-my-card.206126/
Relevancy 18.49%

My gaming computer turned in February and now that it s no longer under warranty things are going wrong This week in the middle of a project the machine rebooted on its own It restarted but shortly after did replacement PSU question it again and again I still have free tech support and two tech s offered help on what could be causing it First I replaced the cooling system thinking the PSU replacement question one installed failed and the cpu was overheating doing it It still rebooted I purchased software called Hardware Monitor to see if the power supply voltage was bad but it seemed ok then I swapped out the memory in case there was a bad stick It still rebooted My support tech feels it still could be the power supply and suggested I replace it I was told that I would need to buy the exact model and that buying any other would require a complete rebuild of my PC Since the computer is years old the power supply isn t sold anymore I was wondering if it s true that my computer would need to be completely rebuilt if I bought a PSU that wasn t the same The power supply is a Enermax Galaxy EVO w model egx ewt My computer was made by Digital Storm More system details available if needed nbsp

A:PSU replacement question

1. What hardware do you have in your system that needs such power? We need your hardware specs: CPU, GPU, amount of RAM, drives, etc.
2. Why does he believe a complete rebuild is necessary because that particular psu isn't made anymore? Is it a special size? If your case is to standard specs then see point #3.
3. Who is this support tech? Does he work for Digital Storm by chance? Check these psu's that will more than meet your power needs: http://www.newegg.com/Product/Produ...07657 600479299&IsNodeId=1&name=1200W - 1499W
4. Before you spend any $ find someone who has a digital volttage meter and test your psu to see if that is really the cause.
 

http://www.techspot.com/community/topics/psu-replacement-question.205941/
Relevancy 23.65%

Hi, i currently have 2 x 1GB sticks of ram in my motherboard at the moment and wondered if i could buy a 4GB stick of ram and use it in conjunction with one of my 1GB sticks of ram, is this possible?
 

A:RAM 1GB & 4GB on motherboard

What are the specs of your pc? how many ram slots do you have spare?

DDR memory must be used in identical pairs for it to operate in dual channel mode. also if your using a 32 bit operating system only 4GB of memory will ever be used by your system.
 

http://www.techspot.com/community/topics/ram-1gb-4gb-on-motherboard.172809/
Relevancy 23.65%

So Im looking for a new motherboard here are my current specs MSI H a Looking Motherboard new for M-P LGA Intel H SATA Gb Looking for a new Motherboard s USB Micro ATX Intel Motherboard Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR Looking for a new Motherboard SDRAM - PCI Express x Intel Core i - K Haswell Quad-Core GHz LGA W Desktop Processor Intel HD Graphics BX I K G SKILL Ripjaws X Series GB x GB -Pin DDR SDRAM DDR Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR SDRAM - PCI Express x So this was my first build and it went great did make the mistake of getting a micro ATX and I have a massive case things that bother my about my current motherboard is that I dont have enough SATA plugs I have alot of hard drives and second I just got monitors and it only has PCI plug So Im also thinking about getting another graphics card to run of my monitors and having my current one run the other I was thinking of getting another GT but I do have a gtx sitting around would they work together Also if you have any advice about changing motherboards and not having to re-install OS clean that would be great nbsp

A:Looking for a new Motherboard

Well you also made the mistake of buying the GT 640 because the gtx 260 is fair amount faster.
 

http://www.techspot.com/community/topics/looking-for-a-new-motherboard.205517/
Relevancy 23.22%

Hi, I'm building a budget gaming PC but I don't know what motherboard to get. Here's the parts I'm planning on buying:

Intel Core i5-3570
Corsair Builder Series CX 430
Radeon HD7850

A H77 board will do as the cost of a K cpu and Z77 board (I presume) would cost way more. I'm thinking something around the price of a Asus P8H77-V LE.

Thanks
 

A:What motherboard should I get for my build?

It matters on what brand you buy. Some H77 motherboards come close to low end Z77 boards. Also, the 3570K is just $20 more and allows for you to unlock your system fully as long as you have proper cooling.

If you would like, I can take a look at your build and recommend better components if I see it fit. Just provide me with a budget .
 

http://www.techspot.com/community/topics/what-motherboard-should-i-get-for-my-build.203630/
Relevancy 23.22%

Please suggest me a best motherboard (upto Rs. 6000) and a PSU for AMD FX-6300 processor.
 

A:Motherboard for amd fx-6300

Why not try the MSI Gaming 970 motherboard, its pretty inexpensive and a decent motherboard. Where do you shop?
 

http://www.techspot.com/community/topics/motherboard-for-amd-fx-6300.205255/
Relevancy 26.66%

Which 1 is better -
1)Exynos 5260 ; Quad-core 1.3 GHz Cortex A7 & dual-core 1.7 GHz Cortex A15 with 2 GB RAM
OR
2)Qualcomm MSM8928 Snapdragon 400 ; Quad-core 1.6 GHz Cortex-A7 with 1.5GB RAM??
 

A:Smartphone processor comparison

Definitely the Exynos 5260, no question about it! It is really a 6 core CPU since it uses the 4 Cortex A7 CPUs to process regular loads and it taps into the 2 A15 CPUs when it needs extra power.
 

http://www.techspot.com/community/topics/smartphone-processor-comparison.205273/
Relevancy 23.22%

I have an old Acer Aspire m3100 desktop and the case to it is broken, I have another case for it but I do not have the installation manual to show me how to reconnect all of the connections from this other case. How can I get or find the diagram showing how to make all connections to this motherboard. I'm trying to restore this computer for my grandson? any help would be appreciated, I've tried contacting Acer but they won't help unless the computer is under warranty and their third-party support doesn't do hardware issues?? I also downloaded a manual from online but it doesn't show the right info.
 

A:Motherboard Installation manual

Check this is the right motherboard.

http://www.gigabyte.com/products/product-page.aspx?pid=2500#ov

The manual is available in the support and downloads section.

Case wiring is pretty standard in most cases (no pun intended). Any details you have about the case your switching to would be helpful.

Motherboards mostly have the names of sockets screen printed next to them.
 

http://www.techspot.com/community/topics/motherboard-installation-manual.205022/
Relevancy 22.79%

Hi, I just installed a gigabyte ga-z77x-d3h into my system (i5 3570), and even after reinstalling windows the computer is very glitchy, it takes ages to come on, freezes, and usb devices don't work half the time.

I'm thinking it's a dodgy motherboard. Any ideas?
 

A:System is very glitchy after installing new motherboard

Actually my first post was wrong, (this is someone else's computer) reinstalling windows fixed the glitches it just pauses on the windows logo for about five minutes before booting up.
 

http://www.techspot.com/community/topics/system-is-very-glitchy-after-installing-new-motherboard.204643/
Relevancy 22.79%

I got this desktop computer that has a Asrock board in it Model # FM2A75M-DGS and it comes up with the boot screen and I try to get in to boot settings or anything and it wants a password. I have no clue what the password is and I need help to see if it can be reset. I have looked on the internet everywhere and have had no luck. If I pull the battery will that reset it......help me please. Thanx
 

A:Forgot Password On Asrock Motherboard

Removing the motherboard battery and waiting a couple minutes before replacing it should reset it to where you can gain access again. It should help you. If not then reset your jumper to clear the CMOS. You can get the jumper resetting instruction in the motherboard manual.
 

http://www.techspot.com/community/topics/forgot-password-on-asrock-motherboard.204604/
Relevancy 18.49%

Hi guys,
My wife's Galaxy was hacked and sent emails out to her entire contact list.
The message contains a link that may provide a clue to who did it.
Is there a way to possibly isolate and open the link to view it without letting whatever it is destroy/spread/etc?
 

http://www.techspot.com/community/topics/odd-smartphone-question.204534/
Relevancy 65.79%

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping
 

A:Upgrading CPU, question about motherboard compatability

Vidosoli said:





Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping Click to expand...

No, that motherboard is LGA 1156 while the i5 4670 is LGA 1150. You would need a new motherboard to go with that CPU>
 

http://www.techspot.com/community/topics/upgrading-cpu-question-about-motherboard-compatability.204453/
Relevancy 18.49%

I am using a corsair H60 liquid cooler. Am I going to get better cooling results by putting the radiator on the top of the case and sucking room temp air in through the radiator and then pushing it out back with another fan(plus a front fan intake also). Or am I not going to notice anything by just having my front intake fan and push the air out through the radiator with a fan? Thanks.
 

A:Cooling question

It is probably best to push air out of the case with the radiator since that will probably lessen the amount of dust that comes into the radiator. That is my opinion though. Maybe someone else thinks otherwise.
 

http://www.techspot.com/community/topics/cooling-question.204467/
Relevancy 27.09%

Hello guys,

I am new here in techspot. I hove you can help me guys. When I open my laptop and run dxdiag processor appears but when I start to use my laptop become very slow. sample screenshot. thnaks.
 

A:Processor goes to n/a

1. Does your laptop feel hot when it starts to become very slow?
2. Did you update your AV, Malwarebytes then do a full scan?
3. if you have done all that and nothing is found next is update all your drivers & windows

If after all those 3 it still becomes slow just post back with results
 

http://www.techspot.com/community/topics/processor-goes-to-n-a.204376/
Relevancy 23.22%

Hi all,

I have heard of somethings like computer manufacturer and motherborad manufacurer. For example some time ago, when I had problem with my desktop PC, some asked me what's your computer manufacturer and motherborad manufacurer?
what's the difference between these two please?
 

A:Computer/motherboard manufacturer

Computer manufacturer Is most of the time is Dell, Hp,Compaq, Ausu are a few.
Motherboard manufacturer . Asus, Gigbyte, Asrock. Msi, Are a few. This is what they are referring to. When they ask you those Questions .
 

http://www.techspot.com/community/topics/computer-motherboard-manufacturer.204218/
Relevancy 23.22%

In hardware monitor, reading 13.2v on the 12v line.

PSU: http://www.newegg.com/Product/Product.aspx?Item=17-151-107

MOBO: http://www.newegg.com/Product/Produ...30790&cm_re=970_gaming-_-13-130-790-_-Product

Should I be worried? BTW im already about to RMA the motherboard because of broken sound. (might these be related?)
bbasically should I be worred about the immediate health of other parts or something
 

A:12v on motherboard reading 13.2v

What does your boards BIOS voltage monitoring read ? When you say hardware monitor I assume you are talking about the utility?
If this is the case then HW Monitor can have reporting issues with certain chipsets and boards.
If you're reading the voltage from the BIOS's hardware monitor then it could be a faulty voltage sensor (likely), or a PSU running out of specification. Checking the PSU shouldn't present much difficulty if you have access to a multimeter or just have an electrician test the output.
 

http://www.techspot.com/community/topics/12v-on-motherboard-reading-13-2v.204199/
Relevancy 22.36%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 22.36%

I ve got this legendary socket motherboard DFI LP UT SLI-DR Expert chipset nForce SLI almost new only LanParty - UT using BIOS DFI Del motherboard enter Cannot key Expert SLI-DR NF4 one SATA port is somewhat messed up missing those plastic parts from both sides bought this baby really cheap from well known Romanian e-bay like site okazii ro and I put it on my FX- dual core yeah THAT one and some KINGSTON value memory and tried to boot my rig Here is my problem now this board is Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard working those red diagnostic LEDS start next only one left so no quot LEDs of death quot syndrome for me and the onboard speaker beeps ONCE which I know is always a good thing but I cannot enter BIOS to setup as I need Del key on my PS keyboard is NOT working as it should I press the key and the result is nada nothing first I see the boot logo from Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard DFI after that Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard I see this error message quot CMOS checksum error - defaults loaded press F to continue or Del to enter setup quot and when I press Del I get nothig and when I press F key sometimes I see this message quot Verifying Pool Data and Backup CMOS OK quot and other times I see quot Sil SATA RAID Press Ctrl-S or F to enter RAID utility quot One more thing to add is that I can actually use boot menu selection using Esc key to selct HDD CD-ROM or some other option and this board actually can boot using CD DVD I already tried UBCD rescue CD and some Linux live distros to see if it s not a problem with my FX- processor and I m happy that it is working well is all good no problem here actually I ve seen it s name and working frequency Mhz at POST please help me to solve this problem with my mobo nbsp

http://www.techspot.com/community/topics/cannot-enter-bios-using-del-key-dfi-lanparty-ut-nf4-sli-dr-expert-motherboard.204105/
Relevancy 21.93%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,

Steve
 

A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP ® Support
 

http://www.techspot.com/community/topics/replaced-failed-motherboard-now-how-do-i-determine-model-number-and-which-bios-to-download.203956/
Relevancy 25.8%

HI Will this processor fit a
Biostar TA970 Socket AM3+ 8 Channel Audio ATX Motherboard.Have now find out it dosent so disregard.
 

A:AMD phenom 9650 quad core processor 2.30ghz

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=623#cpu

You mean the Phenom 965BE 3.4ghz quad core? If so that's an AM3 cpu and it shows support for it.
 

http://www.techspot.com/community/topics/amd-phenom-9650-quad-core-processor-2-30ghz.203920/
Relevancy 18.49%

Hello I am looking to upgrade my current pc will post specs below and am wondering what will give me the most bang for my buck as my budget is limited a $600 with budget only Upgrade question and I may not have the funds to upgrade again for a while Current PC specs Intel Core i LYNNFIELD GHz GB ram and a Geforce EVGA GTX ti GB I was set to order a new MB ram cpu and another GTX ti to run sli My new pc would have been this was all within my budget Intel Core i - K Processor GHz GB ram ASUS Z PRO LGA Motherboard Geforce GTX ti GB x Ive had some people recently tell me the most bang for the buck would be just spending almost all of it on a video card as thats where the bottleneck for most games is I can see that being true but my cpu ram and mb are about years old I still think Upgrade question with only a $600 budget id get more performance for the overall package but im far from an expert and could use any advice and or suggestions Also im a but Upgrade question with only a $600 budget hung up on going from a I to a I but the newer cores have to make up for whatever difference there may be right Thanks and sorry if I put this in the wrong spot nbsp

A:Upgrade question with only a $600 budget

Does your current system not support SLI?

And does you PSU provide enough power for the two 660Ti?
 

http://www.techspot.com/community/topics/upgrade-question-with-only-a-600-budget.203890/
Relevancy 18.49%

Hi Everyone,
I'm new here so I'm not very aware of the things going on. But I'm desperately posting this because I want some good answers and advice regarding my PC. And I'll appreciate any response.

Now here's my question. I recently bought a PC but not the kind you'd want as a gamer. I want to know if it's possible for me to replace its current Video card to Higher one, I mean a Graphic card capable for gaming and compatible for my system. Also about the RAM, I want to know if it's OK for me to change it to like 16g? My current Video card is NVDIA GeForce GT 620 1g. -


 

A:Just a Simple Question :)

It mainly depends on your power supply, motherboard, and your computer's case on whether you can upgrade your video card. Chances are your power supply will be the most limiting factor on your machine. You could bump up to something like a 750 Ti without much concern about the PSU but anything higher and you'll likely need to change that part out also.

As far as the RAM goes it's all motherboard and what you've already got installed. You might end up having to remove some of your memory modules in order to put higher capacity ones in. That shouldn't be an issue with the Core i3 though - 16GB should be easily attainable.
 

http://www.techspot.com/community/topics/just-a-simple-question.203779/
Relevancy 25.37%

Is anyone using one of these with a newer graphics card? like for say if I put a 270X would it just bottleneck even with a mid range card?
 

A:Any point upgrading a AM3 Phenom X4 955

With a bit of an overclock (3.6/3.8ghz) it will run games fine.

Your not going to win any benchmarks at higher framerates, but you can expect a solid 45-60 fps in most games.

I run Battlefield 4 on ultra spec 64 player maps at around 45 to 60 fps.

Phenom x4 965 and a gtx 670.

Using MSI afterburner to monitor cpu core and gpu useage, My graphics card hits 100% utilisation while my cpu is around 80% evenly across all cores.
 

http://www.techspot.com/community/topics/any-point-upgrading-a-am3-phenom-x4-955.203298/
Relevancy 18.06%

So I built my system using this SSD caching It works really well My hard drive is terrabyte and my Cache drive is a gig ssd Lately while a Intel Storage Rapid Technology question.. playing Star Wars the Old repubic I have been freezing Intel Rapid Storage Technology a question.. in game This freezing completely locks the computer I run Teamspeak and I can still push to talk and my friends can still talk and I can talk to them via this during the freeze What is odd is Cnt alt delete will not bring up the control panel to allow me to kill the game I am just stuck Normally I would say this is a Video driver issue I did cleanly reinstall the latest Nvidia driver and this will still occur sometimes Now when I disable RST I never get the problem I can play and play and play When I reactivate RST to maximized I can still play but its like a timer After about or days the Freeze will happen So my RST question is has the driver been updated since when I built my computer and is it possible to update this driver now without having to re-install Windows and all my programs If I am left with having to re-install I am likely to just fork over the money and just buy a gig SSD and keep Windows and or of my favorite games on it and use the Terrabyte drive for Music videos and storage nbsp

A:Intel Rapid Storage Technology a question..

Yep, there's 2013 versions for Win7.

https://downloadcenter.intel.com/Se...=Intel®+Rapid+Storage+Technology+(Intel®+RST)
 

http://www.techspot.com/community/topics/intel-rapid-storage-technology-a-question.203611/
Relevancy 25.37%

Got this machine as a sort of a project..I use my laptop for workand general computing..just wondered could I get this machine up to a decent spec to play games?

http://www.pcworldbusiness.co.uk/catalogue/item/HP+Pro+3125+-+Athlon+II+X2+250+3+GHz/P115540P

above is a link with its current spec apart from memory I upgraded it to 4mb.. is this machine able to run a good high end graphics card I have been looking at the radeon hd7750.. dont want to buy it if its useless on my machine?

thanks in advandce for any help

grahame.
 

A:Upgrading a HP Pro 3125

I wouldn't waste money on it. WHy do you need graphics card? The specs are super-old, but you can still use it for desktop use .
 

http://www.techspot.com/community/topics/upgrading-a-hp-pro-3125.203452/
Relevancy 25.37%

I would like to upgrade my graphics card, but have no idea about how to pick out an upgrade. My system, custom built, is an AMD Athlon(tm) 64X2 Dual Core Prosessor 6000+ 2.99 GHz 2GB of Ram. My motherboard is a MSI K9A2GM-FIH. I have a 500GB Hard drive and 600W power supply. My MB will support 1 PCIe x16 and PCIe x1 slots. I have a Nvidia GeForce 8400GS graphics card, atm, but I want to upgrade to the best my system will support. Please keep in mind that I will, also, be increasing my Ram to 4GB and hope to be changing my OS to Windows 7 in the near future. I have looked online, but all the technical stuff that they write about the graphic cards goes way over my head. I, also, use this computer for gaming. New games coming out for the Windows 7 platform that won't be for Windows XP. Gotta move on up. I know some will tell me to just buy a new system, but when you live on a limited income, upgrading is the best I can do. Thanks for your time and input.
 

A:Upgrading my graphics card

What's your budget? USA?
 

http://www.techspot.com/community/topics/upgrading-my-graphics-card.202612/
Relevancy 23.22%

I was planning on using the lowest i5 processor but because of the refresh I lost the older ones.
The ones that are available are:
Intel Core i5 4460 (3.2GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4590 (3.3GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4570S (2.9GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4670 (3.4GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4690 (3.5GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4670K (3.4GHz HD4600 6MB Cache) Quad Core
 

A:What CPU's are compatible with the MSI B85-G43 Gaming Motherboard

http://www.msi.com/product/mb/B85G43.html#/?div=CPUSupport


Code:
Core i7 [ 4771,4770T,4770S,4770K,4770,4765T ]
Core i5 [ 4670T,4670S,4670K,4670,4570T,4570S,4570,4440S,4440,4430S,4430 ]
Core i3 [ 4340,4330T,4330,4130T,4130 ]
Pentium [ G3430,G3420T,G3420,G3220T,G3220 ]
Xeon [ E3-1240V3,E3-1230V3,E3-1220LV3 ]
 

http://www.techspot.com/community/topics/what-cpus-are-compatible-with-the-msi-b85-g43-gaming-motherboard.202560/
Relevancy 26.23%

This is my Entire system spec Im looking to upgrade my processor but I need help Operating System System Model Windows Home Premium x Service Pack build Install Language English United States System Locale English United States Installed AM Boot Mode BIOS Secure Boot not supported eMachines ET G System Serial Number PTNBA Enclosure Type Desktop Processor a Main Circuit Board b gigahertz AMD Athlon II X u kilobyte primary memory cache kilobyte secondary memory cache -bit ready Multi-core total Not hyper-threaded Board eMachines MCP PM-GM Bus Clock megahertz BIOS AMI P -A Drives Memory Modules c d Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space HL-DT-ST DVDRAM GH N SCSI im with AMD is board? to my What Processor mother compatible this And new CdRom Device Optical drive WD Virtual CD USB Device Optical drive Generic- Compact Flash USB Device Hard drive -- drive Generic- MS MS-Pro HG USB Device Hard drive -- drive What AMD Processor is compatible with my mother board? And im new to this Generic- SD MMC USB Device Hard drive -- drive Generic- SD MMC MS What AMD Processor is compatible with my mother board? And im new to this MSPRO USB Device Hard drive -- drive Generic- SM xD-Picture USB Device Hard drive -- drive WD My Book USB Device Hard drive GB -- drive s n WMAVY WDC WD AAKX- CA SCSI Disk Device GB -- drive s n WD-WMAYUL SMART Status Healthy Megabytes Usable Installed Memory Slot DIMM has MB serial number DE B Slot DIMM has MB serial number D B Slot DIMM is Empty Slot DIMM is Empty Local Drive Volumes c NTFS on drive GB GB free k FAT on drive GB GB free Operating System is installed on c Network Drives None discovered Users mouse over user name for details Printers local user accountslast logon Quentin PM admin UpdatusUser AM local system accounts Administrator AM admin Guest PM HomeGroupUser never Marks a disabled account Marks a locked account HP LaserJet Professional P w on IP Microsoft Shared Fax Driver on SHRFAX Microsoft XPS Document Writer on XPSPort Controllers Display ATA Channel Controller ATA Channel Controller NVIDIA nForce Serial ATA Controller x Standard Dual Channel PCI IDE Controller What AMD Processor is compatible with my mother board? And im new to this NVIDIA GeForce GTS Display adapter DELL WFP Monitor quot vis s n XX- JU -XXXXX- - S June Bus Adapters Multimedia Standard Enhanced PCI to USB Host Controller Standard OpenHCD USB Host Controller HP Webcam HD- Mobiola Wave Audio Device WDM Mobiola Web Camera Video Source NVIDIA Virtual Audio Device Wave Extensible WDM Realtek High Definition Audio Senstic PocketAudio Senstic PocketCam USB Audio Device Virus Protection Back to Top Group Policies No details available None discovered Communications Other Devices Hamachi Network Interface primary Auto IP Address Gateway Dhcp Server Physical Address A D Connection Speed Mbps Microsoft to Adapter Microsoft ISATAP Adapter NVIDIA nForce Mbps Ethernet Auto IP Address Gateway Dhcp Server Physical Address FC C AA Connection Speed Mbps Teredo Tunneling Pseudo-Interface Networking Dns Servers HID-compliant consumer control device x HID-compliant device x USB Input Device x HP Webcam HD- HID Keyboard Device x HID-compliant mouse Microsoft PS Mouse USB Composite Device x USB Mass Storage Device x USB Root Hub x Generic volume shadow copy WD SES Device E F G H I nbsp

A:What AMD Processor is compatible with my mother board? And im new to this

That is an AM3 socket CPU which means it should be compatible with the Phenom II series CPU's. I looked up the board and it should still support up to a 95 watt CPU so any Phenom II X4 CPU with a 95 watt TDP would work on it.

Like This
http://www.amazon.com/AMD-Phenom-Socket-Quad-Core-Processor/dp/B002XNBQJQ
 

http://www.techspot.com/community/topics/what-amd-processor-is-compatible-with-my-mother-board-and-im-new-to-this.202437/
Relevancy 22.36%

This is the link of my motherboar....... http://vr-zone.com/articles/xfx-unveiled-intel-g31-based-xg31i-board/6218.html?doc=6218

I want to know whether I can use a DDR3 Graphics card on my DDR2 motherboard and if its certain to work. Please provide detail and whether it'll be compatible.
 

A:Can a DDR3 graphics card run in a DDR2 Motherboard?

The DDR2 slots on the motherboard refer to the desktop RAM sticks. GDDR3 on a graphics card doesn't make any difference, it's the connector (PCI Express 2.0 probably) that slots into the mobo.
 

http://www.techspot.com/community/topics/can-a-ddr3-graphics-card-run-in-a-ddr2-motherboard.202813/