When inserting memory module on the memory slot it was not aligned properly. When i turn on the power i noticed smoke and i immediatly turned off the power. Removed memory module and half of it was burnt, now my question is the memory slot damaged? Because its slightly burned in the inside slot, could i install a new memory module in that particular slot? or do i have to change the memory slot thats on the mother board?
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
You are probably lucky if you didn't kill the whole board. The slot is most likely toast. If you were brave enough to try another stick in the same slot, it may not work, or it may burn-up something else. I don't think changing the slot is really an option. Motherboards are not exactly repairable items.https://forums.techguy.org/threads/memory-slot.201712/
Intel and Micron held a joint press conference earlier today to announce a breakthrough memory technology called 3D Xpoint (pronounced 3D crosspoint) that's up to 1,000 times faster (read speeds) than today's NAND, features 1,000 times better endurance and is...
I hope this really brings about the death of the hard drive. And it can't come soon enough.
Gimme a 1 TB Xpoint SSD that doesn't break the bank and I'm sold.
Can someone give me an advice, I want to use the very high setting for GTA 5, but the video memory indicator indicates that I go overboard the 2GB of my GTX 750 TI, is that safe?.
BTW my resolution is 1366x768 only.
My samsung 16GB memory card is not getting detected in my laptop.
Even if I connect through my phone data card it's not detected. But it is working properly in my phone. I have been using it for 2 years.
Have you tried it on other computers?Click to expand...
yes, even then it is not getting detected
Memtest and other memory test software don't tell you which of the modules is the faulty one. Is there any way to tell which is the bad stick besides testing one-by-one?
Not really. but you can test each stick one by one
Many in the PC gaming world are turning their attention to AMD's upcoming Radeon R9 300 series launch and specifically, the R9 390X. According to the latest scuttlebutt, this card will ship with two different SKUs - an air-cooled version...
Having to resort to water cooling just to be on par with nvidia what a joke
amd with their hot running primitive brute force gpus
My friend's USB flash memory has data (its drive shows that there is data in it) but when I double click on it to open it and see the contents, it doesn't show any folders and files! I did the following works:
1- I scanned it by my updated kaspersky AV. but no threat found
2- Scanned by windows defender tool. same result!
3- scanned by malwarebytes anti-malware. same.
4- cmd (run as administrator) -> go to its drive (e.g., H:, when H is my flash drive) and typing the attarib -s -h *.* /s /d command. It could not to show the data.
All my attempts faced failure till now.
Can anyone help me please?
Go to cmd (run as administrator) -> go to its drive (e.g. H: where H is my flash drive) and type the attrib -s -h *.* /s /d
Now flash will show the data.
Your attrib spelling was wrong correct them
I have a HDMI cable for my monitor, with a nvidia graphic card...
but now I have a big doubt, I dont know if my motherboard's graphic card's imput is not working anymore or if its my graphic's card after a FLASHY BLACKOUT today...
my nvidia control panel is not working anymore... whenever I try using VGA or HDMI with my graphic card it doesnt show any sign in the screen... so im currently using my normal VGA motherboard's imput...
I tried using an old graphic card and its not working, I tested the VGA cable and HDMI cable and they are working perfectly...
yet, after I set the graphic card in the slot, the fan it start working, if I unplug the graphic card but leave the curent cable, it doesnt start the fan so I guess the motherboard's imput is working
so idk what's the problem here, I have all the drivers and everythign was working perfectly before the blackout
Well... its too late and soon for expect an answer but...
I tested my graphic card in an old motherboard and it was working... it didnt load windows cuz of the diferent motherboard but connecting my VGA in my gpu worked, and the HMDI didnt work I guess because it need to be configured after windows loading etc
Hi to all at Techspot. I'm not a techie but noticed that there was two kinds of memory, DDR3 and DDR5. My Question is,
What's the difference between DDR3 Memory and the Graphics DDR5 Memory and if the DDR5 is in anyway better then why is it not used for desktop computer memory instead of DDR3.
I know some apps are taking advantage of or utilizing graphics memory Thanks for any explanation
As far as I know, memories used on video cards have different characteristics than memories used on PC.. since this is beyond my knowledge, I'm sorry I can't explain much more in details.. Just wait for other members with deeper knowledge that can give some information regarding of this matter
For the past month, Nvidia has faced its fair share of bad PR thanks to the GeForce GTX 970's memory allocation issue. As has been uncovered by users and explained by Nvidia, the GTX 970's last 512 MB of VRAM...
Again: the performance didn't change overnight; it's today the same performance than the advertised on launch date. Even that technicality can kill the case. Specifications were the "misleading" part.
Samsung has started mass producing what's being called the industry's first ePoP, or embedded package on package. By combining two key smartphone elements into a single package, Samsung's solution promises to offer high-end handset makers up to 40 percent more space.
It's the natural progression of tech right now.
Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!
Dell Optiplex 790
Win 7 Pro
How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
1 4gb samsung pc3-12800 1.35 v
1 4gb nanya pc3-10600 1.5 v
The timings are listed different on the stick.
HWInfo reports that at 666.7 both are 9-9-9-24
Crucial will sell me all 1.35 v memory as upgrades and the 4830T-6678 Timeline X came with the [email protected]
The laptop boots and runs with both sticks installed
Any thoughts on this?
Is the laptop reporting 8GB of memory installed? If it is, you should be okay
I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.
It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.
To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.
Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.
Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.
If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.
If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.
Hope that helps.
Most of memories, RAM, ROM, HDD, DVD-RAM and others are
random access. What are some non random access memories please?
I plan on upgrading the ram on an older laptop.
It comes with IGB DDR2 PC2-4200 533MHz SODIMM, can I add
IGB DDR2 667MHz SODIMM to the spare slot and will it detect it?
Thought I'd ask before attempting!
Hard to say, there is only one way to know, that is to try. I'm assuming you have the modules in question. Otherwise I would suggest buying modules of the same specs to increase chances of compatibility.
I installed a Windows XP x86 on my PC. But when I open the system information window in the System Summary tab, in the right-hand pane and at bottom the following are written:
Total Physical memory 768.00 MB Available Physical memory 270.41 MB !!
Why Available Physical memory is 270.41 MB please?
PS: My system is very slow and also very slower when start up. Isn't that less Available Physical memory the source of that slowness?
You have only 1Gb of ram installed on the motherboard and XP is using 768Mb which isn't leaving much over. You need to install more ram. It depends on what you are using the computer for but I'd say you want at least 2Gb ram.
Hi Im new here and im hopeless hope u can help me, !st sorry because I cant find in forum on my problem. well here it is..
I have Samsung 900x New series 9.0 Usb slot is 3.0. just a simple problem but for me its big problem, I cant install any of my 6 pcs usb all is 2.0, It detect yes in device manager but cant install while im updating driver so my laptop can install what usb I inserted, It says error code 28. acess denied, so I cant install any of my flash drive including my external hdd 500gb, pls can someone help me.. I already search to google but non of it helps.. Thanks very much! hope to hear from you guys,
Can you please provide more specific information of your laptop's specifications and operating system used.
I Made a mistake buying Samsung laptop model NP350V5C-A0EUK. It worked exactly for 1 year I.e till warranty period within 1 month from the date my warranty expired one of my RAM's stopped working - I bought a new RAM, after that my hard drive got bad memory sectors - I replaced it, then one of my RAM slots was dead, now there is a problem with the second slot.
My question is - By any chance can we get RAM slot repaired ?? - I suppose answer may be NO - I may be wrong as well
If the answer is NO, I suppose I can use other parts of the laptop like processors, RAM, HD, Key pads, display screen so .. on. Is there any way that I can replace some thing like mother board alone to get back my laptop to life ??
Thanks in advance for your suggestion
One friendly suggestion out of scope of this question - never ever ever buy Samsung laptops
I'm willing to bet there is not one repair shop willing to take on the task. Not only would it cost more to do the labor than the motherboard is worth, it would take specialized equipment. Motherboards are dated so quickly, it doesn't pay to repair them. Unless the damage is very simple to work with.
I wanna make sure I done all steps before sending these 2 new sticks of memory back to newegg because there defective.
2 new sticks match the old stick. G.Skill, F1-3200PHU2-2GBNS, DDR-400, CL2.5-3-3-6 2.5 ~ 2.75v, PC3200 1Gx2
The 2 old sticks works in all 4 memory slots. New memory sticks does not.
When the PC completely boots up I get lines on the monitor and freezes PC up after done booting everything. I reboot PC then get check sum error on the black boot up screen with F1 to continue or F2 enter setup.
Acer Aspire T160 desktop
That's a bit too old for me to be confident giving suggestions, sorry.
Lately, My laptop is very slow in recognizing my usb stick, or my Hard drive (usb 3.0) or my sxs cards through my express card slot. It 's also slow in recognizing my sd-cards through my card reader. I have a very fast laptop. A lenovo W530.
I just started a while ago, and I can't get it to recognize faster . Everything else works just fine and fast.... but it takes up to 4 minutes to recognize these things.
Can somebody help?
Hey tidri. 2 things come to mind if it previously worked. One is a reinstall of all the drivers for the mobo, and the other is a full AV/Malware/Rootkit scan. If everything checks out, a full format and an OS reinstall would be my third move.
So, memory timings: 10-10-10-27.
Is that crap?
Edit: Is 9-9-9-24 better? I'm under the impression that the smaller the number the faster the ram.
I'm currently using this memory, it says the timings are 10-10-10-27. I looked in my bios and the timings were set to 9-9-9-24 so I changed them to match the RAM.
Is that recommended or should I have left it?
That's the wrong memory I linked to, I have this. My timings actually are 9-9-9-24. I'm trying to find my command mode, does anyone know what it is for this memory?
Recently I was doing a research about a memory update for my G - LA Notebook and in many websites including the Netbook User s Manual I found that this Notebook could be upgraded up to Gb of memory So Upgrading Notebook Failure G42-365LA HP Memory I bought two RAM memories of Gb each one SoDIMM DDR PC - MHz according to researched specifications But the thing is that when I installed them I couldn t enter into the OS it sent me to the Windows Error Recovery window directly and whichever option I choose it reboots and it keeps doing that Well I tried installing just one memory alone and the result is different it came up with the BSOD giving me different errors each time I reboot the Netbook These errors are BAD POOL HEADER PFN LIST CORRUPT IRQL NOT LESS OR EQUAL I ve tried to reinstall the OS with memories installed but the result is the same My Notebook is a HP G - LA Windows Home Premium x Service Pack Intel Core i CPU M GHz I don t know if I was cheated by the manufacturer website and or the others websites that s why I need your help P S When I installed just one memory module I can see The Windows intro logo but just for two seconds or so And I tried to install quot Ubuntu desktop amd x quot with just one Gb memory module inserted and everything was good but it wasn t with the two cards installed nbsp
One of the stick of ram maybe bad. Try them each one at a time.
This was posted by Corsair a couple of days ago. What does everyone think? Is this just an attempt to get people to upgrade to shinny corsair ram, or is this finally a reason for gamers to have good ram/ overclock our current sticks?
No way the average FPS increases by 20 just by adding faster RAM (1920x1200 ultra graph)... BF3 barely gains 3 FPS from high speed RAM. It is just bloated graphs and marketing.
I need forum recommendations on good reliable memory sticks, 4x4 GB or 8x2 GB (don't sure which is better). Mostly PC will be using for games and some audio recording.
Don't know which clock 1866 or 2400 (O.C.) for motherboard will be better.
Can somebody share his experience with me?
First, you should know that X79 is the first (and only) consumer platform with a quad channel memory controller. That means for maximum memory performance you must use at least 4 DIMMs, populating channels A, B, C, and D.
The Sabertooth X79 originally supported up to only 1866 MHz, but I see the QVL lists kits up to 2400. http://support.asus.com/QVL.aspx?SLanguage=en&p=1&m=SABERTOOTH X79&hashedid=RPOIwd0pKLoXnbFV
If you buy a kit on this list, it has already been tested to work with your board, at least at stock CPU speeds. If you overclock your CPU (and you should with that unlocked processor), some of the higher speed RAM may not boot. I believe you'll be safe buying a 2133 kit, even one that's not on the QVL. I'm running Kingston HyperX Beast 2400 in my Asus P8Z77-V & i5-3570K system with great results, and it's not on my QVL. If you do go for the 2400, you should pick one of the 4x4GB kits from your QVL for assured compatibility. If all those are hard to find (or too expensive), roll the dice and get the kit you want, but make sure it's a name brand like Corsair, Adata, G.Skill, Patriot, Kingston HyperX, Crucial, etc., as they have reputations to preserve and do lots of testing on all platforms.
Also, check out this recent thread about whether or not fast RAM is worth the money - http://www.techpowerup.com/forums/showthread.php?t=191311
My motherboard is a Z77 Asrok Extreme 6.
It has four dimm slots. I have One kit of 8 gigabyte memory from Gskill that is DDR3. 'dual channel' (11-11-11-28) PC 2133.
If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?
Here is another better question. What if I buy the exact same memory from Gskill and drop them in as well? So I have two kits of dual channel 8 gig ram for a total of 16 gigs. Both kits would be same type/speed and latency. Will this work or do I need to use 'quad channel'?
Edited for spelling.
If I get another kit of 8 gig from ANOTHER vendor and its different timings can I put them into the alternate slots and have it work? Say I buy Corsair (9-9-9-9) PC 1600. Would the two kits work against each other since they are different timings? Is this NOT recommended?Click to expand...
I'm thinking that different timings will cause issues with Dual Channel functionality. I'm also thinking that Dual Channel only functions if all modules can operate in dual mode. If you are not planning on operating in Dual Channel mode, I don't think it matters. However the modules should operate with the same timing, if they are to be linked together.
Anyway without actually knowing for sure, those are my thoughts.
Greetings Tech memory 64 Pro 7, bit Windows More why? and Folks I have More memory and why? Windows 7, Pro 64 bit since found out that one of my memory modules is bad I am a gamer and built my system Currently my system spec is as follows Intel I K overclocked to ghz I used the default OC settings on Motherboard Asrok Z Extreme motherboard gigs of Gskill Ripsaws DDR PC module died now running on gigs Corsair Gold PS EVGA Geforce GTX w gigs onboard Win Pro Seagate Barracuda Terrabyte Drive rpm OCZ gig SSD This is used as a cache drive using Intels SRT technology set to maximized I play raid EQ high to very high settings Distant worlds all expacs Civ The Secret World X Gal Civ Heroes III and IV and I spend hours up every night correcting people on the internet ok not really I also occasionally watch HD movies I have downloaded via HDMI too my TV I also use my computer for work I typically have spreadsheets open along with a browser with or tabs open in addition to using Open office for documents Oh and lets not forget using Pandora streaming my music while I am working Now I am going to replace my module and get back UP to gigs of ram My question is do we REALLY need more than gigs for ram Also in Win is there anything I should set or reset to optimize its performance such as the page file or anything else I used to set the page file when I had Win XP but since we have so much ram nowadays I thought we no longer have to bother Any advice is most welcome nbsp
This question is a Windows OS question, why was this moved to hardware?
I m gathering components for Other - & Devices PSU Motherboards, compatability Memory, my first PC build And guess what I have a few questions The rig will be a dedicated gaming rig primarily racing games might get into flight sims Looking for reliable gt fps at or just below p single quot - quot display Will keep my current PC for non-gaming duties budget limit less the display and peripherals Will get into Motherboards, Memory, PSU & Other Devices - compatability OC but conservatively and not right away Don t expect to go SLI but might eventually Components bought or en route Corsair Carbide R mid tower ATX Win -bit Home Premium SP OEM disc Core i - K Mobo Asus Z -A LGA HDD TB WD Blue And looking at Gigabyte GTX GB prettly much decided - bang for Motherboards, Memory, PSU & Other Devices - compatability the buck and sufficient Motherboards, Memory, PSU & Other Devices - compatability for purpose price going down and rebate this month Memory GB x GB DDR SSD GB Crucial m SATA Gb s I like the price doesn t have to be the best looks like immediately installing latest drivers should take care of reviewers complaints ODD Lite-On iHAS - PSU Corsair Enthusiast Series TX M W modular subject to further research but I like this From the Asus web site I ve downloaded the Memory Qualified Vendors List QVL and the Devices QVL Too much information and not enough The memory list is extensive the devices list is not My central question is how important is it that I select memory from the Memory QVL and likewise the PSU from the Devices QVL Just looking at the devices list it is clear that not being on the list does not mean a particular part won t play nicely with the Z -A The Corsair PSU selection is very limited What should I focus on other than price Thanks for your help Frank nbsp
I presume then, that although it may be somewhat important to be guided by the Memory QVL (simply because it seems so comprehensive), the Devices QVL can be ignored. Will proceed accordingly.
Alright so I got an Aspire M since One day it suddenly card Graphics or slot? the is broken it wouldn t start up Beeping noises are heard from the CPU long short After a bit of research it seems Graphics card broken or is it the slot? that the computer could not detect the graphic card which results in it not starting up So I reinserted the graphic card Failed Did it again Failed Repeated for hour Still hearing long short beeps Then after a few maybe hours I tried again reinserting the graphics driver connecting the monitor cable and turned it on It worked Graphics card broken or is it the slot? I didn t know what happened but it worked After Graphics card broken or is it the slot? I was done using the computer I turned it off The next day today the problem came back Reinserted plugged monitor cable turned on and it works Now I don t know whether its the graphic card or the slot Wonder if replacing it will work I m afraid that if I turn off the PC the problem will return Any help would be appreciated I never opened the CPU since for cleaning nbsp
Hey Falconet. I think I would be far more likely that the graphic card is flaky since in your research the beeps point to the graphics card. If the slot were damaged, chances are you wouldn't get it to work at all, and since it worked one day and not the next, and since the slot itself won't break on it's own, I would suspect the card first. It wouldn't hurt to check both connection points of the cable the next time, although the beeps indicate the card's operation itself as not being right.
I just came from a retail store to check on prices but most of their parts weren't available anymore. Instead of a G. Skill Ripjaws 2x4 8gb DDR-3 1600, the clerk offered me a Crucial Ballistix 2x4 8gb DDR-3 1866 memory. The board I'm gonna buy is an Asrock H77 Pro4/Mvp but looking at their memory support list http://www.asrock.com/mb/memory.asp?Model=H77 Pro4/MVP, it doesn't seem compatible.
The clerk had told me it was compatible and that he had tried it before but I'm not sure if it'd have unwanted effects over some period of time. (I got drawn in by how the memory looks and its LED so I'm including it as a choice). Thanks.
It will be compatible, worst case scenario is just setting your 1866Mhz RAM to run at 1600Mhz. You're getting quicker RAM for free.
Hi folks, I love to do video editing using adobe premiere, but as videos are recorded more often in HD even from my smartphone feels like there is not enough power anymore.
My system is Biostar Hi-Fi A85W motherboard with AMD A8-6500 and 4 GB DDR3. Now I am wondering if a memory upgrade to 8 GB would really make sense in that case? Or could it be a too slow CPU and I have to replace my current board?
I will be glad to hear your advice!
That is a newly released CPU, so it is not slow. Plus, it is a quad core. If you just do basic computing tasks, the 8GB will allow you to multitask more. Check out this site for what RAM to buy: http://goo.gl/95Yh
I have an USB flash memory brand PNY. Its speed is very low, that is, when I copy or delete files into/from it, it takes a very long time to be done. Is there a way to speed it up?
NO. Most likely you have it inserted to a USB 1.1 slot when it needs USB 2.0.
I have ps2 corupted memory card I try too delete the corupted data but it wont ........... and the memory card wont load by the browser ............ plz smeone show way to format it plz
My computer. Lenovo IdeaCentre K300 has a slot, about 3/4 as long as the memory slots. Does anybody know what it might be for? Because I'd sure like to fill it. I just feel a computer is not complete with empty slots.
Pre-thanks to all who reply ;0)
I'm not following. I've called up a few pics but I don't see anything other than PCIe, PCI, and DDR slots.
I bought two 2GB Memory Ram for my Lenovo IdeaCentre K300. I'm trying to find instructions on how to install them. But all I keep running into is where to buy them. Can anybody give me some easy to follow instructions? I'm hoping it's as simple as opening up the computer looking at the 2 full slots and putting the 2 new ones in the same way. being real careful that you don't bend or break anything. Thanks
I bought two 2GB Memory Ram for my Lenovo IdeaCentre K300. I'm trying to find instructions on how to install them. But all I keep running into is where to buy them. Can anybody give me some easy to follow instructions? I'm hoping it's as simple as opening up the computer looking at the 2 full slots and putting the 2 new ones in the same way. being real careful that you don't bend or break anything. ThanksClick to expand...
Don't know if this will help, but hopefully it will http://www.wikihow.com/Install-RAM
I have a Lenovo IdeaCenter K-300 ( 64bit) 2 of its memory slots have 2048MB each 2 are empty.
Is 2048 MB each the same as 2gbs each or 1 gb each? I need to know so I can buy the correct memory for the 2 empty slots. Thanks
You have a total of 4gbs in your current config (2 x 2048).
I am not a computer savvy and all I wanted to know what is PCI, PCle x16, PCle x1 slot. As, my mother board had came up with these facilities and I don't know what the use of this slots and how can they helpful for me. So need a detailed explanation over these structures.
Has my mother board has 1 x PCle x16 slot
1 x PCle x1 slot
2 x PCI slots
The PCIe x16 slot is for GPUs, it is the highest bandwidth of them all. I can explain more later, I am in a rush now.
Hi guys ! again this is the best website ever !
I was wondering about the way we find out the memory bus of any video card/win 7
my old one was 512/128 ,, now I got my new one which is 1G ,, but how wud I know the other number ? the memory bus I think
Try Googling it!! I would...
I have an older Toshiba laptop,P205-S7806. I want to upgrade the memory but was told it came with 2gb and that's all it can hold,it is a 32bit. I am not computer savvy by no means so please any help,make it simple. I was told I could change it from the 32bit to 64bit,is this really easy and then can I use more memory..thanks for any help you give me..
They were correct, 2GB is the max for your notebook.
Memory Upgrade for Toshiba Satellite P205-S7806 Laptop
Crucial® Memory Advisor results for the Toshiba Satellite P205-S7806 Laptop/Notebook.
Toshiba Satellite P205-S7806 Memory Upgrades
Hi I have a TOSHIBA GB I had much important project data on it and I did the most terrible mistake of my life not to back it up when all my other HDD datas are double if not triple backedup stick data recovery Memory It was working fine till late night till in the morning when I plugged it on my computer it told me it Memory stick data recovery sholud be formatted first The drive letter doesn t show up on My computer nor in My devices I tried using the EaseUS Data Recovery sample version but it too cant detect the drive I went through the flash drive data recovery procedure in this forum but I do not understand that if I format the drive the data will be gone Again I do not have a backup to copy it again I dont want to recover using the drive but just the data Please please please help someone if such a thing is possible Its almost months of my hard work An update Now its appearing as Removable disk on my computer and if I click on it its saying insert disk into drive F If I try exploring it the format option is appearing Please please help I need the data nbsp
I am about to buy corsair vengeance 8gb 18660mhz. My mobo is Asus M5A97 LE R2.0. My cpu is AMD3+. Will the ram be compatible with my motherboard. Please answer asap.
Yes it is compatible.
I got a system in recently with a weird issue It would reset after a few sticks, System restarts memory fine two with with one minutes and then shorter and System restarts with two memory sticks, fine with one shorter intervals on restart continually I tested for all the normal stuff power supply temperature unplugged the video card and checked the error logs but only the unexpected restarts were listed with no suspicious events around them If I removed a memory stick it ran fine though I thought it was a bad stick but I ran memtest on both sticks without errors for a few passes Immediately though if I plug in both sticks the system won t stay on for more than a minute or two I adjusted just about every bios setting concerning memory without change and tried loading bios failsafe defaults Anyways I m considering between just telling the owner that the system can only support one ram stick now likely due to some motherboard fault or trying to do a bios update though I m a bit hesitant that if there are issues with the motherboard maybe I should just leave the bios version alone I d be interested in hearing others takes on the issue CPU- AMD Athlon X GHZ Motherboard- amd gm-m RAM- CORSAIR CM X - C MHZ System restarts with two memory sticks, fine with one - - - nbsp
Often a faulty memory stick will work by itself, but then fail once running in duel channel.
Unfortunately this is very difficult to test with two sticks, so there's no guarantee that this is the issue. You may just have to buy some new memory.
I have H61M-ITX board with 1 x PCI Express 3.0 x16 slot (blue @ x16 mode)
I wan to install there PCI Express x 4 card:
I made clean Win XP SP3 install + all MB drivers on top. After I inserted pcie x4 card and boot up. Win XP didn't detect the card (though leds on card are blinking from periodically)
I then tied LAN adapter I have to check if all is fine with MB. I took this one:
same behaviour - system doesn't see it but if I plug eth cable then leds on lan card blink.
please tell me what is wrong I do? I checked bios for anything related to PCIe and found nothing.
Have you tried updating your Intel chipset drivers? They can be found at Intel.com in the download center. They would have updates for the PCIe drivers and other assorted H61 chipset features.
I have an Gigabyte Radeon HD7770 1GB card. It works just fine, but I have noticed an issue where memory size detected differs from the actual size.
For example dxdiag (both32 and 64bit) detects only 700MB. So does Can You run it (from time to time).
I did validation with GPU-z and it does show proper size at 1GB: http://www.techpowerup.com/gpuz/9p6wr/
I am wondering whether this might be due to a faulty card or (crossed fingers) nothing to worry about. I love this card and it would, obviously, really blow if it's defective.
Almost forgot to add that I am, currently, running on Windows 7 64Bit Home Premium. Windows 8 Pro 64Bit show the card as having 768MB of memory.
If it works, don't worry about the detected memory difference
I have an older 1GB p.c. I want to add 1G.B. to it. I located the correct part but my question is,,is this a simple process ? or should I have a pro do it? thanx
Here's one of the many videos on installing RAM. It is fairly straight forward. Module is notched in such a way that it will only fit in the slot one way. Depends on how cluttered it is inside the case, you might need to disconnect some cables/wires to do the install. I'd also get a can a compressed air and blow out the dust if it's dusty inside.
I have a nvidia geforce2 mx/mx 400 128MB VGA card. when I turn on computer today, VGA memory is displayed as 64MB instead of 128MB.
what could be the issue ?
I can't say what the issue is but thats an old card and could be experiencing issues from aging.
The GPU (dual, actually) I'm getting is an ATI Radeon 3870 X2 1GB. My current GPU is a classic NVIDIA GeForce2 MX/MX 400. The processor I'm getting is an AMD Phenom II X4 3.4GHz 965. My current is an AMD Sempron (something something). The memory is two 4GB Corsair Vengeance RAM cards. My memory is at 640MB (I know, it's pathetic.) currently.
Go for your memory first. Your over all performance on you stuff now will improve.
Compaq Presario SR 1000 SR1639UK
Microsoft Window XP
Version 2002, Service Pack 3
2.19Ghz, 1.00GB of RAM
ACPI Uniprocessor PC
AMD Athlon ? 64 Processor 3700+
NVIDIA GeForce 6200SE TurboCache?
Hello, I wish to upgrade my PC with more RAM. Understand that upgrading RAM is easy.
Can any one guide me on how to carry this out.
Is it worth it considering the make and model??
Windows XP Home SP3 on a single core 2.2Ghz processor should run fine on 1GB of memory. Considering the cost of "DDR400 PC3200" I wouldn't upgrade, unless you absolutely needed more memory for a specific reason.
My windows xp 64 bit runs super slow after windows loading sign and it takes me 2 hrs to open up the desktop and transfer 6 images. I use 2 RAM's of 2gb (kingston DDR2). When I opened up BIOS, it showed 640k as base memory and 126m as extended memory.
There are no details under the computer title if I try to check the properties of computer or maybe it is just taking too much time to display. the desktop is fine, my computer still works but takes hours to do a simple task. it all started all of a sudden. Also I would like to know if 'unganged mode' is fine as it is displayed when the system boots. I tried to check another different RAM on the computer, but still no change, so I am confused regarding the problem.
My system is one month old, or something. I assembled it together with a friend. Since 1st day, CPU-Z does not report dual channel with my DDR3 Corsair Vengeance LP CML8GX3M2A1333C9 8GB ( 2X4GB ) 1333MHz. The sticks are in the slots the mobo manual recommends (A2 B2).
In the BIOS, I could not find the information if they're in single or dual channel.
My chipset and mobo drivers are all up to date.
Edit: Solved (by myself) . All I had to do was uninstall an re-install a newer version of cpu-z. I'm a hero.
I am trying to recover my files-all.
Recently all the folders and files disappeared, normally when this happened i would view all the hidden files in the folder options and also unchecked the hide protected operating....
and i would see the hidden files.. now only thing i see is a folder marked playlist (guessing since it was in ma phone that's apart of the reason),
however if i delete it it comes back my guess is its a virus, i know my folders are still on it cause the space is allocated in the properties box so its there... i also tried the command line (attrib -s -.......and so on) but nothing worked, i only see the same playlist folder..
i don't want to buy one of those recovery software cause its costy and i might not use it frequently..
This might help:
I want to change the drive letter of my memory card, which shows up and is usable from My Computer but is not listed on disk management. I'm running Windows XP SP3 on a dell vostro 1400. Is there any reason for this? The card is a Canon SD Memory Card SDC-16M
Put in a memory card that the computer DOES see in disk management, change the drive letter, then put in other card & see if the computer can see it then. I really don't think changing drive letters is going to allow you to see a memory card, most likely it's dead, but it's worth a shot. Hope this helps, take care!
I am unsure of what memory to get if I upgraded my PC. See attached for pc specs.
I am unsure of what memory to get if I upgraded my PC. See attached for pc specs.Click to expand...
If you're talking about RAM, go here http://www.crucial.com/systemscanner/
it'll tell you everything you need to know.
Okay so I have been looking around for a while and found 2 graphics cards I like and I was wondering what slot my motherboard has. Here are the CPU-Z details. I really need to know if it is a PCI-E x16
-http://www.nvidia.com/page/geforce_7800.html (NVIDIA GeForce 7800 PCIE x16)
-http://www.nvidia.com/page/geforce_6600.html (NVIDIA GeForce 6600 PCIE x16)
Thank you so much in advance! If you have any answers, questions, comments, or concerns leave me a comment and I will try to get back to you ASAP.
It appears the motherboard has the following expansion slots:
One PCI Express x16
Two PCI Express x1
See here for details: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01357175#N278
I had a prob. lately my physical memory when opening task manager dow its 26% any way to increase it???
note :::: when I play assassins creed ravolaitions it jumps up to 60% or even 80%
Please post specs to your system. Download speccy at: http://www.filehippo.com/download_speccy then save as txt & attach to this thread. Post back!
Hi everyone, I have a Lenovo T61 laptop with 1GB of RAM.
I'm looking to upgrade this to 2GB or 4GB as I am running windows Vista on it.
I believe that it has 2 DDR-2 667 RAM slots, becaus CPUz says that it's running in dual channel mode but I'm not sure, and don't know how to find out.
Thanks for reading
Have you tried the Crucial website? That will generally tell you.
My I drive is reading: not accessible incorrect function. Please help
See if this might help How to Cleanup and Remove old USB Storage Drivers
Hi, I order two sets of memory sticks both 2 GBs. here they are
1st one I bought: http://www.amazon.com/Corsair-PC2-6...GG/ref=sr_1_10?ie=UTF8&qid=1336701850&sr=8-10
here is what I am staring it
What do you guys say is everything working fine?
I'm slightly confused. You said your purchased two sets but yet the second purchase appears to be a single module. Even in the screenshot the module size is 2GB.
What exactly is the question?
Are you are questioning the frequency of 400MHz?
If so, that is normal. DDR stand for Double Data Rate, DDR2-800 would be Double Data Rate of 400MHz which is 800MHz.
Hi, I have an old slow pc which had only 256MB of SDRAM installed, so to speed it up I decided to up the memory with a1GB stick of DDR memory. The mobo, a ECS K7AMA has 4 slots, 2 for SDRAM and 2 for DDR ram. I removed the sdram beore I installed the DDR ram, I changed the jumpers as necessary but the system seems to think there is only 32MB installed which makes for a very slow pc, running XP. I have tried both slots but it makes no difference.
I I revert back to the SDRAM, changng jumpers that is recognised fine.The memory is from Crucial and is the type recommended by them on their website.
Any suggestions as to where I may be going wrong?
The motherboard may only recognize 2-512MB DDR modules or even just 2-256MB DDR modules
This was really perplexing. I am trying to install a Galaxy GT520 on my Inspiron 546. So i take of the slot i need in the back-plate and fit the card into the slot. But...the card didn't fit into the back-plate. It's like a millimeter off.... There is a little slot that the back-plate slots go into but it doesn't fit into the slot. It's almost like it needs to be a millimeter longer. Thanks to anyone who helps.
check this out http://support.dell.com/support/edocs/systems/insp535mt/en/sm/cards.htm#wp1193399
GT520 is a PCI and should fit the 546, line it up as ^^^^ shows and press hard, dont ram it in there, but apply a bit of force.
when i plug in my memory stick and do a search on it it say please insert the last disk of the multi-volume set and click ok whats gone wrong please
it could be that the zip file is part of a lot more files. they are usually broken up into smaller parts to upload, and you need all of them to decompress the file.
or the file didnt completly transfer onto the USB drive, or has become currupted/damaged.
Hello My first post
Anyway i really need to upgrade my computers graphics card ( Nvidia 7600 GS 512mb intergrated version) as its flagging in this day and age and its stopping me playing most games now (i can just scrape skyrim but it falls under its min requirments) I will get a top of the range laptop soon when i go to uni but will keep my desktop for now so i need to add a better graphics card (Rest seem to be fine for the mo) .The problem is the integrated cards is already in the PCI express slot (opened up comp and i can see it in the slot) will be safe to remove the board and would a new card function in it Thanks for the help.
If the 7600 is in the PCI e slot, by definition it is not integrated. You should be able to pull it out and swap in a newer card without any issues, so long as your power supply can handle it. Be sure to remove your old graphics drivers before performing the upgrade.
What parts of a system dictate the maximum amount of memory it can use? Does it come down to the number of lines in the address bus?
The motherboard dictates how much RAM a system can hold. The OS dictates how much RAM can be used.
Hello; Need some help here. Have an ASUS netbook with Atom 330 processor and 2GB of ram installed. System says only 767MB available. Replaced memory with 2 - 2GB sticks from Crucial (limit on machine is 4GB). Rebooted and system still says 2GB installed and 767MB available. Any ideas?
Here is some info. The integrated GPU will use "X" amount of RAM (whatever your GPU is).
I am not a for overclocking build selection system Seeking X79 & memory gamer I Seeking overclocking & memory selection for X79 system build play games occasionally but don t build systems for gaming I am a commercial photographer architectural product industrial I shoot high mega pixel files build and save multiple copies layered Photoshop files very large scans and video footage I need a lot of storage space processing speed transfer speed and memory My previous builds have been dual Xeon systems and x Win OS since Win Previous systems have included dual Ghz dual Ghz dual Mhz amp dual Mhz using Asus amp Supermicro boards Besides my workstations I ve built a half dozen other systems The last systems have included drive RAID arrays in RAID config for working video files I haven t built a system in about years My goal is to build a system suitable for my photo video needs that provides modest stable overclocking - targeting Ghz I am also interested in combining a pair of Seagate Hybrid drives Momentus XT in RAID as the OS drive for a balance of space and performance rather than going to SSD I ve never played with Overclocking nor water cooled systems As I start this build I am tight on funds and propose to bake in a planned future upgrade to allow the cost of those components to go down and still see an immediate jump in speed over my current system I expect this new build to be X as fast as my current system minute render in minutes The future upgrade will further potentially double the speed - min Build purchased so far gt Corsair Carbide R case - selected for large side fan USB eSATA amp Firewire ports on front face gt ASRock X Extreme MoBo selected for GB support USB SATA III RAID also for fairly simple Overclocking capability gt MasterCooler Gold w PSU gt Corsair H Hydro CPU Cooler kit extra fans for push pull airflow selected for high efficiency simple liquid cooling also considering Maingear Epic T thermal compound top end but expensive gt LG Blu-ray burner I burn a lot of Blu-rays as part of my Backup Archive strategy hundreds per year gt Front mounted Card reader with additional USB gt EVGA Nvidia GTX Superclocked GPU bought used for selected as a cost saving option that still provides ample CUDA cores for video rendering to be purchased over next - weeks gt Intel i CPU Overclocked to a modest but stable GHz gt GB GBx Mushkin Quad Chan CAS RAM - - - gt Dual Seagate Momentus XT GB Hybrid Drives in RAID for OS I replaced a laptop drive with the GB version and was impressed plus it offers much more space than a midsized single SSD or dual smaller SSDs gt RAID TB Barracuda GB s rpm drive for Data Drive frankly I like the Hitachis better but the Seagates are somewhat cheaper I will probably get these last hoping the cost drops further and production increases gt Windows Developers OS beta free for evaluation amp testing driver issues gt Adobe CS amp CS Suites I also plan to continue using the TB Lacie Big eSata drive I now have as well as a small collection of RAID NAS drives My current workstation will also stay on my desk along with my newer Thnkpad i - QM GB RAM dual GB RAID Future upgrade - gt Intel i X gt GB RAM x GB gt Nvidia GTX gt possible SSD OS drive s Issues amp Questions I have are related to the speed and latency of memory for this system and issues related to overclocking Any suggestions recommendations Much appreciated nbsp
Not sure how "used" it is but that evga gtx460 1GB SC is $129.99 new.
I recommend you stay away from Seagate for there horrible failure rate. Western Digital Caviar Black or Blue is the way to go.
My question is I'm getting a new G. Card, do I get (examples, I haven't made a decision.)
1. A newer Radeon 6800 series with only 512mb of mem
or 2. A Older maybe 6500-6700 series with 1-2GB of ram?
What are your system specs and budget? What kind of PSU do you have? what's your budget?
I had this memory stick for a while, and its been working fine. It has a lot of my important college work on it too. Just a few days ago it randomly stopped working. I've tried it on all computers I can and none of them recognised it, and it didn't pop up in 'My Computer'.
The best reaction I got was on this laptop, where it said it was processing, but then said that I did not have a suitable driver software or something like that. Please help, I have a lot of work on it .
A lot of them quit just because they have been dropped more than 12 inches.
Hi there I was purpose? What listings motherboards? are for compatibility their Memory wondering if someone could clarify why motherboard manufacturers put out memory compatibility listings Im in a discussion with a work collegue who seems to think that these lists are non-exhaustive and they do not also display incompatible ram Ive explained to him that i believe these listings are designed to show a list of all ram that is tested by the MB manufacturer and is known and therefore guaranteed to be compatible with the board in general He disagrees Memory compatibility listings for motherboards? What are their purpose? and suggests otherwise - he thinks that memory of similar specification timings and voltage to those listed on the compatibility are guaranteed to work as they Memory compatibility listings for motherboards? What are their purpose? share the same characteristics - he suggests those lists serve no purpose when trying to match memory types and motherboards for compatibility and therefore cannot be relied upon in a situation where ram may not be compatible with the board in question If anyone can clarify exactly why motherboard manufacturers provide these lists - Memory compatibility listings for motherboards? What are their purpose? that would be great nbsp
But you don't want to assume the various modules would work together, or at the same time. Those listings of compatibility may show they work in the same system, but may or may not show memory that works together..
I have recently joined this forum just because of some issues which are colliding in my mind..
Actually I want to know that Is DDR2 an excellent memory for automotive and industrial to server, consumer, networking, and computing?
Is there a reason for asking?
You can't just pick and choose the memory type you want. The memory type must match the design called for by the motherboard. DDR3 is the latest memory design and DDR4 will probably be available before long.
I have a satellite pro l300 - only 1 usb port is working the others have been physically damaged. I was wondering I could put a card into the express card slot ..I was thinking one of these
but I am confused, with pcima, express slot converters......would the above work ? - laptop is running vista.
Yes this adapter should work fine
i was facing the problem of the laptop compaque 2134 ad , abruptly shutting down and restarting , gicing blue screen with error msg on next restart ..... fan sound start stop with power light blinking etc ....... changed it with another old battery lying with me .... but the same problem .... then i noticed that ... with ac power , but no battery in the slot the machine is running fine ...... but with the battery in it ... it gets funny ........ please help me!!!
Buy a new laptop battery just like the one that originally came in the laptop. Don't trust old laptop batteries. They go bad just laying around
how to check my pcie slot working or not. When i inserted nvidia Gforce 9500gt it is not detecting my mother board (Asus M2N VM HDMI ) but graphics cards fan is working. then how can i identifies the slot is faulty or not. Is their any changes to be done in the bios. Please help me. My processor is AMD Phenom 9550 and 3Gb DDR2 ram is inserted.
You do need to go into BIOS and disable the onboard video card in order for one plugged into a PCI slot to work. That is most likely your problem.
There are diagnostic cards that you can plug in to test your motherboard such as the one at this site:
You also might call nearby computer stores to see if they have the equipment there and will run the diagnostic for you if you bring in your motherboard.
I have tried to increase the amount of memory my computer has but am running into some issues. It says I can use 1066/800/667/533/400 for which there are 4 slots each of which have a led light next to them. They light up in either green for good or red for not so good. Anyway I have a total of 3 2gb memory cards (PC5400) but I always seem to get a red light on which ever one I put in the third slot.... I want to get the maximum usage out of my pc but would like to fix this problem. Any clues?
XFX GeForce 8200 AMD SOCKET 940
Galaxy GT430 1gb GPX Card
AMD Athlon 64 X2 5800+ 3.0 ghz.
4gb (At the moment) pc-5400 2gb x2
As XFX has a really annoying system for hiding whatever minimal amount of info they have for this board of yours, it is hard to give you too much help.
The general specs for the GF 8200 chipset allow for easily 6 GB of RAM. If I interpret your question correctly, you are having trouble with the 3rd slot only and not the others. If so, don't use the troublesome slot and use the 4th slot. If that doesn't work either, your board is probably starting to fail, but then again, your board is probably starting to fail. It may well be time to move away from an AM2+ board to an AM3 or AM3+. You may also have to change your CPU and/or RAM but then again you may well still be able to get a compatible board such as this:
Prices are not very high and will probably only be available for the next 6 months or so as all these boards have been phased out by their makers. This is the not-so-bad news. The good news is that you will be able to use all your other parts with them.
Okay, so my question is whether there is any difference between having two 2x2 dual channel memory versus one 4x4 dual channel memory. Both would end up with 8 gigs, while one uses 4 slots and the other only 2 slots. For instance, I have the G.Skill Ripjaw 2x2 memory installed, and I am looking at upgrading to 8 gigs. Would simply buying another set to fill in my two remaining memory slots be the same as swapping out the 2x2 for 4x4 memory? This is of course assuming I have 4 memory slots supporting dual channel memory, and all other memory variables are kept constant.
Since you already have 2x2GB you might as well go ahead and add another 2x2GB to get to 8GB.
I have 6 gigs of crucial ballistix memory at 1600 mhz on my computer. I've had it for about half a year, and it has ran great until about a week ago. One of the sticks is not being recognized by windows, so now i only have 4/6 gigs of memory. The strange thing is, that speccy does see the memory, but it says that only 2 out of 6 memory slots are being used instead of 3 out of 6.
I am using windows 7 ultimate 64bit
go into the bios and check the ram slots and see if all 6 show up
Hi Guys please be gentle with me as this is my first post
I noticed my laptops fan was on most of the time running fast so I opened task manager and it shows cpu usage at least 60,to 100%,I then looked at processes running and noticed 4 instances of iexplorer running, 1 was using 337mb,the 2nd 145mb,third 132mb and so on,the one using the most was also using 50% of the cpu,this cannot be right ,can any kind soul help be please
I want to add memory to a Dell Inspiron 6000 laptop it now has DDR2 ps2-3200, I want to upgrade from (2) 256 to (2) 1 GB chips. What is the fast memory this computer will take?
Run the test here:
So how do i use it?
IBM LENOVO SL510.
Ive put the sim card in but theres no software or option to use it. Do i need one of those mini pci WWAN cards? if yes do i just plug it in or does anything else connect to it. If no please let me know how i enable this feature.
try finding in software that is provided lenovo
Try finding in softwares that are provided lenovo. Maybe you will see something related.
i bought a USB memory Stick from overseas, and it was supposed to be 128gb,
when i tested it with 'H2test' the realy stoarge of the USB is only 2GB.
Am i able to hide/delete/alter the portion of the memory stick that is faulty and useless.
thus changing the propoerties of the memory stick
Change it to what? You can't make 2 gigs hold 128 gigs.
If you bought with Paypal or a credit card you may be able to dispute the purchase....
I have hp pavilion dv6 laptop with 2Gb RAM and 760Mb onboard graphics. So is there any perticular method to increase the graphic memory?
Some laptops has an option in the BIOS where you can choose how much of the available RAM you want to share with the video card, so if your laptop has that option just add more RAM and adjust in the BIOS
I am new to this forum and to posting tech questions online in general so hopefully I can describe what s going on accurately My computer has had no problems to iPod, External device) memory drives working (e.g. external not speak of lately I had not synced my iPod nano in some time maybe a month or two so I plugged it in yesterday to sync it I received the following message quot iTunes has detected an iPod that appears to be corrupted You may need to restore this iPod before it External drives (e.g. iPod, external memory device) not working can be used with External drives (e.g. iPod, external memory device) not working iTunes quot I have since discovered the problem has nothing to do with External drives (e.g. iPod, external memory device) not working the iPod itself The iPod plays all the music and podcasts that are currently on it just fine When I plug it into my girlfriend s computer her iTunes recognizes it just fine as my iPod and I was able to pull videos off of it I am now pretty certain the problem is with my USB drives I have an external memory drive that I use to back up documents - I had not used this in some time either Out of curiosity I plugged it in and it s not working either When I plug it in and turn it on nothing pops up and when I try to do certain actions to check on it like open My Computer the system freezes and I end up having to manually shut down the computer and restart I have gone through several threads on various forums and tried almost everything but nothing has resolved this issue Some threads suggested that plugging in certain devices can mess up your USB drives like this and a few weeks ago I did plug my girlfriend s printer into one of my USBs - I did get it to work but things were a little screwy with it so I m wondering if somehow that did something Other than that I can t think of anything else that has changed since the last time everything worked So far I have tried changing the drive letter on the iPod I have tried cleaning up my USB drives by using drivecleanup exe I have uninstalled and reinstalled the drives through Device Manager and I tried restoring my computer to a time when everything was working - none of this has fixed the problem and I m now at a loss Also FYI it s not easy for me to reinstall my operating system I have Windows XP Professional Service Pack because I purchased my computer from a custom dealer so I do not own my operating system CDs - they just load the OS onto the computer for you I can take it in to have it reinstalled but it costs and I just did that a few months ago so I really don t want to spend that much to do it again if it s not absolutely necessary especially since everything else on the computer is working fine I am hoping someone will have some insight on this and can help me out Any advice is welcome this has become extremely frustrating and time consuming Thanks Jon nbsphttp://www.techspot.com/community/topics/external-drives-e-g-ipod-external-memory-device-not-working.171337/
I'm planning to fix up this laptop soon. I need to buy 2 x 2gb for the ram and a new LCD screen for it. I plan to get a new HDD for it sometime next year. What do I need to know for buying this ram stuff and if there would be a program that would give me the extra info about it that I may need...
Read the manual. If there is no manual then do a search for the make and model and you should be able to find the manual in PFD format. It should tell you everything you know.
How old is the system and what is the make and model?
So I have an Asus N61Jv and am wanting up upgrade the memory from 4 to 8GB. I know that it's DDR3 1066 (PC3-8500) and DDR3 1333 (PC3-10600) compatible. I was wondering if I might be able to step up some more on it like 1600?
Unless the laptop can be overclocked, I do not believe that will benefit you much.
Which version of Windows 7 is installed, 32 bit or 64 bit? If 32 bit, then additonal RAM won't be utilized.
I have a Toshiba Satelite l645D and when I go to my ATI Mobility Radeon HD 4200 settings it says it has a total of 1405 available graphics memory, but only 256 Video memory is dedicated... My laptop has plenty of RAM to give to the video card, and when I go to the BIOS theres no option for increasing the video ram whatsoever... Is there any way to do this?
If there are no options in the bios, the answer is no
hi got a question i have a video card withe 4332mb
the problem is it Shared Memory of 2559 MB
this gives me alot of problems withe gaming and i realy would like to change this
is there a way to change the Shared Memory to dedicated memory?
this would realy help
Could you provide the details of your graphics card?
HERE IS MY help! upgrade Memory LAPTOP DETAILS I want to know what s Memory upgrade help! best to upgrade Logical Chipset Memory Banks Max memory is GB How do I upgrade it and with what is it with DDR pin soDIMM PC I m about to buy Corsair but advise me please Computer Manufacturer Acer Model Aspire Z Family None Version V SKU Number None Computer Chassis Manufacturer Acer Can be locked No Version V Power Cord s Serial Number Chassis Serial Number Boot-up State Safe Power State Safe Thermal State Safe Security State External Interface Locked-out Mainboard Manufacturer Acer Multi-Processor MP Support No Multi-Processing MPS Version Model Nettiling Type Mainboard Version V Serial Number Base Board Serial Number Asset Tag Base Board Asset Tag Location in Chassis Base Board Chassis Location Mainboard Properties Removable No Replaceable Yes Hot Swap No On-board Devices Intel Video Graphics Controller Video Adapter Enabled Broadcom Lan Controller Ethernet Adapter Enabled Computer Memory Controller Location Mainboard Error Correction Capability None Number of Memory Slots Maximum Installable Memory GB BANK - DIMM Samsung x D A D x AA AA Unknown DIMM Synchronous DDR MB MHz BANK - DIMM Hynix Hyundai x D D x Unknown DIMM Synchronous DDR MB MHz Chipset Model Acer Mobile PM GM GL Express Processor to DRAM Controller OEM Device Name Intel Mobile PM GM GL Express Processor to DRAM Controller Revision A Bus Intel AGTL Front Side Bus Speed x MHz MHz Maximum FSB Speed x MHz MHz Width -bit I O Queue Depth request s Maximum Bus Bandwidth GB s Maximum Power W Chipset Hub Interface Type DMI Direct Media Interface Version Number of Ports In Out Width -bit -bit Duplex Yes Multiplier x Speed MHz Logical Chipset Memory Banks Bank MB DDR SO-DIMM - - - - - - T Bank Temperature C Bank MB DDR SO-DIMM - - - - - - T Bank MB DDR SO-DIMM - - - - - - T Integrated in Chipset Yes Shared Memory MB Maximum Installable Memory GB Supported Memory Types DDR SO-DIMM Channels Memory Bus Speed x MHz MHz Maximum Memory Speed x MHz MHz Multiplier x Width -bit FMAX - Fast Memory Access Support No Refresh Rate s Power Save Mode No Fixed Hole Present No Maximum Memory Bus Bandwidth GB s APIC Version Multiplier x Maximum Interrupts IRQ Handler Engaged Yes Enhanced Support Yes Memory Module Manufacturer Samsung Model M T EZ -CE Serial Number AA AA Type MB DDR SO-DIMM Technology x Mx Speed PC - U DDR - Standard Timings - - - - - - Version Date of Manufacture Monday September Memory DC Line V Timing MHz - - - - - - Timing MHz - - - - - - Timing MHz - - - - - - Memory Module Manufacturer Hynix Hyundai Model HYMP S CP -Y Serial Number Type MB DDR SO-DIMM Technology x Mx Speed PC - U DDR - Standard Timings - - - - - - Version Memory DC Line V Timing MHz - - - - - - Timing MHz - - - - - - Timing MHz - - - - - - Sensor Model Intel Core CPU P C Version Mainboard Specific Support No Temperature Sensor s CPU Temperature C Voltage Sensor s CPU DC Line V System Bus es on Hub Version System Bus PCI System Bus PCIe x Gbps System Bus PCIe x Gbps System Bus PCIe x Gbps System Bus PCIe x Gbps System Bus PCI LPC Hub Controller Model Acer ICH M-E ICH LPC Interface Controller OEM Device Name Intel ICH M-E ICH LPC Interface Controller Revision A ACPI Power Management Enabled Yes Advanced TCO Mode Support Yes Advanced TCO Mode Enabled No High Precision Timer Enabled Yes Number of Precision Timers System Timer MHz Delayed Transaction Enabled Yes Disk Controller Model Acer H ICH Ultra ATA Storage Controllers OEM Device Name Intel H ICH Ultra ATA Storage Controllers Interface ATA Revision A Maximum UDMA Mode UltraDMA- ATA Mobile Yes Channels In Use Channels Port UltraDMA- ATA Port UltraDMA- ATA Disk Controller Model Acer Mobile SATA AHCI Controller OEM Device Name Intel Mobile SATA AHCI Controller Interface SATA Revision A Specification Maximum SATA Mode G SATA Channels In Use Channels Port G SATA Disk Controller Model Acer SD Bus Host Adapter OEM Device Name Ricoh SD Bus Host Adapter Interface SDA Re... Read more
Now that is detail! The support site for this model states the maximum memory to be:
Up to 2 GB of DDR2 533 MHz memory, upgradeable to
2 GB using two soDIMM modules (dual-channel support)Click to expand...
Am I reading that correctly, because you stated you had plans to upgrade it to 8GB? Newegg has plenty of options for laptop memory, but I think your motherboard may be limited to something closer to what you have, with room for only slight improvement. If I am in error, someone please correct me.
You also posted this:
Maximum Installable Memory : 2GBClick to expand...
EDIT: In other words, it seems to me that you can only double what you currently have in size, but not in speed. Again, I welcome scrutiny. I think that you may be looking for something more than I am providing here.
So here s the problem I ve got four blocks of corrupted data on my memory card I ve tried deleting them but it doesn t work I would ignore it except now I cannot save anything new on it If I try that data will data Memory PS2 Card for Max Corrupted 16MB on also become corrupted I ve been searching online and unfortunately have yet Corrupted data on 16MB Max Memory Card for PS2 to find a solution I ve tried putting an audio CD in and then deleting the corrupted data Clearly that didn t work I have also tried to format the card but here s the thing I cannot find the option where it says to format I was hesitant to consider the option to format the card at first seeing as all my data will be deleted but I ll get rid of it all if that allows me to able to use this memory card I ve went into the memory card where i can look at all the data seeing if there are any format options- none I tried attaching a picture to show that the memory card does not have an option to format There are only two options quot Enter quot and quot Back quot Help anyone nbsp
Anyone? I really need help. This is driving me insane and I'd just like to deal with it and get it out of the way already. Please....heeeeelp. :/
I have a Compaq Presario SR1960AN which has 1024MB PC2-4200 DDR2 memory.
I purchased another 2 gig of memory and each time I have tried to add it the computer beeps and doesn't seem to load.
I have taken the original memory out and tried the new memory which didnt work either.
Any suggestions would be appreciated.
did you check the new memory you purchased with the QVL to make sure it is compatible?
secondly, you didn't happen to buy something called 'high density ram' did you?
many times (and its advisable) that you use identical ram when adding memory, or at least the same brand, type (single sided, dual sided) capacity, timings, voltage, ect.
Hi there peeps,
I intend to buy 8 Gb of corsair vengeance memory and i would like to know if it is compatible with my mobo. My motherboard it the AsRock N68c-s ucc, its chipset is Nvidia, although i dont know if this makes a difference or not?? please respond asap
thankyou, Ace Rimmer.
You are going to use memory that cost 3 times as much as your motherboard. This doesn't make much sense. If you are using an AM3 CPU this memory should work
Hello this is my first post here so if i ve posted this in the wrong place i apologize I have a custom built pc problems Asus Deluxe P5Q memory running windows xp Asus P5Q Deluxe memory problems pro sp with an asus p q deluxe motherboard with two gig sticks of corsair xms memory mhz installed in the yellow slots This has ran fine for a couple of years but has slowed down a bit when a lot of programs are open so i bought more sticks of the same memory and installed them in the black memory slots and now the pc wont boot It will boot fine with sticks but not I have altered the voltage from to v which what it says on the sticker on the memory and the timings to that of the sticker - - - but no joy I have also removed the old memory and put in the new memory in its place and it doesnt post with the new memory The only difference i can see with the new memory is that its a different version no but would this stop it from posting Im now stuck as to what to do Does anyone have any ideas Thanks very much Pc specs asus p q deluxe Intel core duo ghz geforce gt windows xp sp soundblaster xfi xtreme music w power supply sata drives nbsphttp://www.techspot.com/community/topics/asus-p5q-deluxe-memory-problems.167514/
My friend has purchased a 32GB Memory stick. We have stored a file on the device and confirmed that it is there but when we remove the stick and re-insert it we get "this folder is empty" but if we look at the memory it shows that an amount of memory equivalent to the size of the file has been used. What are we doing wrong please?
(I'm assuming that the 'memory stick' is not write-protected, because the available space was decreased after "the event")
Alright, I think I might've got the answer. But by 'memory stick' I presume that you mean either a USB-based flashdrive/thumbdrive, or a memory card like a Compact Flash card or a SD-card.
Because: my explanation will alter drastically if you mean that you actually tried storing a non-volatile piece of software on a volatile piece of hardware like a DDR RAM memory stick via 'pin modulation' etc.
Three explanations then, I'm assuming that you are using Windows. The explanation will be the same for most Macintosh and most Linux OS's (but not all).
"1." if you meant USB-drive instead of memory stick.
"2." if you meant memory card instead of memory stick.
"3." if you meant 'memory stick' as in RAM, Then my hat is off to you, sir.
1. You inserted a USB-drive, stored a file on it, removed it. Now the file is gone, but the space is occupied. How come?
Are you familiar with "Safely Remove Hardware"?
IF NOT: When you remove a USB-drive from the computer, you must (oftenmost) perform a 'Safe Removal'. If you look downright on your system tray when a USB-drive is inserted, you'll see a green arrow thingy called 'Safe Hardware Removal' or something like that. You will have to choose your USB-drive from a dropdown list when right-clicking this icon, in order to insure that your data stays on the disk when you remove it. A message will then pop up saying "It is now safe to remove your drive".
Take a look at this!
IF YOU ARE:
Are you sure you performed it? If you did, keep me posted!
More advanced explanation:
You see, when You wrote a file onto the memory, the cells inside the memory were charged in accordance with the data which you stored on the device. But keep in mind that the "name" of the file (more like the 'identity' of the file) is stored in a completely different way (in a volatile, non-permanent way) in order to enable a "possible" write of multiple files onto the device.
IF the device is removed without performing this "Safe Removal", then the data will stay intact, but the file's ID will end up as de-charged anti-neutrinos somewhere on the other side of cosmos. In other words: the PC will be un-able to identify the file, even though the data is there, and even though the data is occupying the total storage available.
You have now created something simply (and inaccurately) referred to as "Mémoire mort". Un-usable storage space, until reanimated using third-party software. Your file is there, but un-identifiable.
2. You inserted a memory card, stored a file on it, removed it. Now the file is gone, but the space is occupied. How come?
If you used an older OS like XP, this is something that happens from time to time as XP was not really designed with memory cards in mind (was it a kernel not being open enough? Never mind...).
If you simply removed the memory card as expected, but still cannot see the file, then you have not only lost the file's identity, but also the entire file.
Look at the advanced explanation on "1." -- but now instead of just the ID being stored in a completely different way, the entire file is stored in a volatile state. Without the 'Safe Removal' (which lacked serious support in XP for memory cards), the entire file is not written onto the memory chip/card. It also dissipates into anti-neutrinos unless I'm mistaken. BUT: the storage space which the file was used to 'inhabit', was 'reserved' for the file, and thus it was awaiting the file which didn't came = "Mé... Read more