Windows Support Forum

Computer freezing, replaced motherboard still freezing. Help.

Q: Computer freezing, replaced motherboard still freezing. Help.

hi all im new to techspot my computer keeps freezing my freezing. Computer freezing, Help. motherboard replaced still friend who built both my last computers has done all kinds of Computer freezing, replaced motherboard still freezing. Help. checks tested hardware n software and pinpointed it to motherboard replaced motherboard with new ram aswell n worked fine for days then started freezing again then wouldnt boot up replaced graphics card worked ok for days then started to freeze again then wouldnt boot up ive just ordered new tb hard drive if its not that only thing left is power supply ive also replaced a few of the cables as i had new ones i must say my friend who is a genius with computers and has worked for numerous computer companys no s wot he is doing and its totally thrown him he s never come across this its totally random ive even got new inch monitor which someone said it maybe but i didnt get it for that reason my old needed replacing and my partner got me an early xmas present its so annoying can anyone help please nbsp

Relevancy 100%
Preferred Solution: Computer freezing, replaced motherboard still freezing. Help.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Computer freezing, replaced motherboard still freezing. Help.

Well replace the power supply then...

http://www.techspot.com/community/topics/computer-freezing-replaced-motherboard-still-freezing-help.136029/
Relevancy 22.79%

As the title says , I accidentally cut a wire between 2 pins (or whatever they are called) and now my PC starts slowing down after 20-25 minutes when I open it. After I restart everything is back to normal but after 20-25 mins its the same again. Is there a way to fix the wire between them or I have to buy a new motherboard? (sry , my english isnt very good. I hope you understood what is my problem) the image is what im talking about ,(the red is the wire) ,I got the motherboard picture from google , so its not mine.
 

http://www.techspot.com/community/topics/accidentally-cut-wire-between-2-pins-in-motherboard.217587/
Relevancy 13.33%

After going through lots of programs and cleaning out an infection, I restarted it and it is almost totally unusable. I can confirm that both mouse and keyboard work, mouse light is on, and keyboard lets me open the calculator. Any help please? Thanks.
 

A:Can't move my mouse, but computer is not frozen

If the mouse is USB (not a PS/2 connection), try disconnecting and then reconnecting. You could also try a different USB port for the mouse.
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.183253/
Relevancy 13.33%

Hi, I have decided to buy a new computer(or the parts for one).
It will be the first time I assemble one so I would like a little
help from the people on here that has some experaince with computer hardware,
because I myself do not know very much about it.

I have done some research and this is what I came up with:
Motherboard : Asus Z97-A Intel Z97 4xDDR3 SLI CrossFireX Socket 1150 ATX
CPU : Intel Core i5-4460 3.2GHz Socket 1150
RAM : Crucial Ballistix Sport DDR3 DIMM PC12800/1600MHz CL9 2x4GB
GPU : Gigabyte GeForce GTX 750Ti OC 2GB D
PSU : CORSAIR PSU 550W VS550
Hard Drive : Western Digital WD20E, 2TB, SATA 6 Gb/s, 3.5", IntelliPower, 64MB

What I want to know is if all these parts will fit together and if it is a good
computer? I want a fast computer thats good at a bit of everything. What I will be using it for mostly is programming, games like bfbc2, downloading/watching movies/tv series and just browse the internet.

And I think I will be using mint as my os(still new to linux).
 

A:Assembling a computer for the first time

I think those are great choices.
 

http://www.techspot.com/community/topics/assembling-a-computer-for-the-first-time.217526/
Relevancy 13.33%

I just bought these I will return them if need be so don t pamper me http www newegg com Product Product aspx Item N E Question one these Questions about computer speakers speakers plug into my old jack front speaker port on my mobo should I use the center sub-woofer port instead Should I have bought some kind of HDMI or SDPIF speakers instead If so how much better are they My video card nvidia has extra hdmi ports my Questions about computer speakers mobo has a spdif port Should I buy sound card speaker combo Is my mobo and or video card just as good as a good sound card Should I download some software to compliment my new speakers Do I need to change any settings on my computer to take advantage of them In the control panel should I up the quot quality quot from bit hz studio Virturilze sound Boost enhance Will loudness equalization hurt my coolness nvidia g gaming http www newegg com Product Produ e nvidia g gaming- - - - - -Product Mobo z m pro http www newegg com Product Produ amp cm re z m pro - - - - - -Product p s my old speakers were like years old I don t even see where to adjust the bass p s s I use my speakers for music and gaming ps was trying to spend on a speaker upgrade flac is wow nbsp

http://www.techspot.com/community/topics/questions-about-computer-speakers.217390/
Relevancy 23.22%

Hi . considering that I don't overclock , I don't wanna SLI , im gonna buy cpu I7 4790 4G - 32G ddr (8x4 quad channel) - Windows 10 64bit .What's the best gaming and cheapest gigabyte motherboard on the market ?
 

http://www.techspot.com/community/topics/gaming-motherboard.217380/
Relevancy 13.76%

Memory is a key component in any computer and without a sufficient amount on tap, the entire system will feel sluggish regardless of what other beefy hardware you might be running.

Read more
 

A:How much RAM is in your computer?

16GB... Because I love keeping numerous Chrome tabs open.
 

http://www.techspot.com/community/topics/how-much-ram-is-in-your-computer.213529/
Relevancy 12.9%

Just checking it seems like something is not wife's on this - my Keyboard - - found disabled getting computer of EPP tired still wrong on this computer just using a standard plain usb keyboard All of a sudden this morning when she was changing a plain ordinary mouse the keyboard quit working it works on Keyboard not found - EPP - disabled - getting tired of this on my wife's computer another computer the mouse works while using the same usb port in device manager there is no entry for Keyboard in devices and printers way down at the bottom a quot usb multimedia quot keyboard shows but when I try to look at the drivers there are several drivers and I cannot delete or disable any Looking at the HID compliant consumer control device driver details there are no drivers Device Manager Keyboard shows keyboard there are speed settings but in the hardware tab no name manufacturer location or device status Just in case with all of the problem we have had lately I did some scans the dss scan seems strange Is it mbam Windows Service Pack x NTFS Internet Explorer Motherboard FOXCONN Keyboard not found - EPP - disabled - getting tired of this on my wife's computer AB Processor AMD Phenom tm II X T Processor CPU mhz Disk Partitions C is FIXED NTFS - GiB total GiB free D is FIXED NTFS - GiB total GiB free E is CDROM F is Removable G is Removable H is Removable I is Removable J is Removable K is CDROM M is NetworkDisk NTFS - GiB total GiB free P is NetworkDisk NTFS - GiB total GiB free R is NetworkDisk NTFS - GiB total GiB free S is NetworkDisk NTFS - GiB total GiB free T is NetworkDisk NTFS - GiB total GiB free Something is rotten in Denmark nbsp

A:Keyboard not found - EPP - disabled - getting tired of this on my wife's computer

Some place I saw a message that windows updates was set to no update hareware files, but I can't find where to change that.
 

http://www.techspot.com/community/topics/keyboard-not-found-epp-disabled-getting-tired-of-this-on-my-wifes-computer.191043/
Relevancy 44.72%

Hey guys I recently within the last weeks built a new computer and it has been rebooting and freezing on me whenever I try to use youtube or play games on steam There have been no BSOD the computer just freezes requiring a hard reset or it will reboot itself I have already run several stress tests including Heavyload Furmark prime and metest The computer did not crash during any of these tests In addition under stress rebooting/freezing PC New I have been monitoring hardware temperatures using SpeedFan so I do not suspect the rebooting freezing is due to overheating I have used a different power supply to see New PC rebooting/freezing under stress if that was the problem although it did not change anything I have also completely updated my graphics drivers I ran memtest on my computer and could not reach - passes I could only complete pass in hours which was horrifically slow It was stuck on test hammer test for most of that time I did not feel like running my computer hours to complete a stress test OS Windows bit Build Geforce GTX graphics card AMD FX- quad core processor Gigabyte A-UD P motherboard GB of PNY ddr ram x GB stick Corsair CXM series W ATX V power supply PNY GB SATA-III SSD Western Digital Blue TB Hard Drive -Was having problems with an old thread so I made this one nbsp

A:New PC rebooting/freezing under stress

Investigate Event View; system logs. Look for errors
 

http://www.techspot.com/community/topics/new-pc-rebooting-freezing-under-stress.216314/
Relevancy 31.39%

Intel has led the desktop processor market for the last decade, dominating in price and performance nearly without challenge since the introduction of the Core 2 chips in 2006. However, as of late the challenges of improving silicon chips has...

Read more
 

A:Intel's 10nm 'Cannonlake' delayed, replaced by 14nm 'Kaby Lake'

"Devil's canyon" take two
 

http://www.techspot.com/community/topics/intels-10nm-cannonlake-delayed-replaced-by-14nm-kaby-lake.215777/
Relevancy 12.9%

I have scoured the internet for months, and I couldn't find anything. I even checked an old article from this website, which didnt help. I have tried most obvious things, such as disabling stereo mix, though and help at all is accepted because you never know. Thanks.
 

http://www.techspot.com/community/topics/turtle-beack-x12-replaying-computer-sounds.216239/
Relevancy 22.36%

Elitegroup Computer Systems, better known to PC enthusiasts as ECS, may soon kiss the branded motherboard market goodbye. Sources familiar with the matter claim ECS is planning to exit the DIY board market due to shrinking global demand and increased...

Read more
 

A:ECS reportedly set to exit consumer motherboard market

Wow didn't even know these guys were still around I've not touched and ECS board since the athlon 64 days and even then I wouldn't buy one lol.

Not saying they were terrible but I've never been a budget system builder so their products have never appealed to me.
 

http://www.techspot.com/community/topics/ecs-reportedly-set-to-exit-consumer-motherboard-market.215774/
Relevancy 13.33%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 21.93%

Since pure alcohol, for example pure Isopropyl alcohol and distilled water are supposed not to conduct electricity. What would happen if I dipped a turned-on PCB into it? . What would happen to a motherboard?
 

A:Would a PCB or motherboard be damaged if dipped into pure alcohol/distilled water while turned on?

OUCH ! Your assumptions may be spot on, but OMG why would one try this?????????

There's something called 'leakage' - - current flow when it's not expected.

I was working in an aerospace lab and the the EE had me perform an experiment because I said "the resistivity of the salt water was too low and leakage would trigger the device". So we got a bucket of salt water and dropped the device into the bucket - - precisely 30 seconds later (the designed timeout), the bucket erupted and salt water spewed everywhere [yes, the device was an explosive link].

The trigger point for the explosive was <500ma
 

http://www.techspot.com/community/topics/would-a-pcb-or-motherboard-be-damaged-if-dipped-into-pure-alcohol-distilled-water-while-turned-on.215856/
Relevancy 12.9%

I heard there's some certification to mount ESD safe equipment (ESD mats, etc) at computer workshops and other ESD safe environments. Could I get this certification myself in London? Is it expensive?
 

A:Is there some certification to mount ESD safe equipment at computer workshops, etc?

See https://www.esda.org/
OR domestic (U.S) http://www.dekra-certification.us/en/electrostatic-discharge-esd
 

http://www.techspot.com/community/topics/is-there-some-certification-to-mount-esd-safe-equipment-at-computer-workshops-etc.214706/
Relevancy 22.79%

Hello,
I had a dell optiplex 7010 (service tag# 3LLBSW1) computer.
I took the motherboard out of this computer and installed it into a new ATX case.
all went well now I 'm having problems connecting the front panel audio, power switch, reset switch, & HD LED)

the dell connector is different than the cables I got on the new case. can anyone please help me to figure out how to plug these cables into the motherboard.

thanks
 

A:Dell Optiplex 7010 motherboard

Attach photos.
 

http://www.techspot.com/community/topics/dell-optiplex-7010-motherboard.198629/
Relevancy 12.9%

So I'm building a coomputer for my first time and have already selected parts that I think would be good. Not sure though as this is all new to me, but basically I just want a good computer capable of running a flight simulator in high quality graphics. So I just want to make sure that everything is compatable with each other, and if you have a part that would be better than what I have listed, please recommend. The list of parts I have come up with are as follows:

Case: Xigmatek Soundwave ATX Mid Tower

Power Supply: Cool Power Performance CP P600 204 pin ATX Power Supply w SATA PCIe & Dual 12V Rails

Mobo: MSI ATX DDR3 2133 Motherboard 970 Gaming

CPU: AMD FX 4350 Unlocked Quad Core Processor 4.2 4

RAM: Corsair Vengeance 8gb (2 x 4gb) DDR3 1600 MHz PC3 12800 240-Pin DDR3 Dual Channel Memory Kit

Optical Drive: Asus 24x DVD-RW Serial-ATA Internal OEM

Audio Drive: Asus Xonar DG Headphone Amp & PCI 5.1 Audio Card

Video Card: MSI GTX 960 Gaming 4G

Hard Drive: Western Digital Caviar Blue 500gb SATA III 7200 RPM 16mb Cache Bulk/OEM

Then I will be installing Windows 7 Home Premium.

Thanks Guys!
 

A:Are these parts sufficient for a decent gaming computer?

Give us your budget.
 

http://www.techspot.com/community/topics/are-these-parts-sufficient-for-a-decent-gaming-computer.214561/
Relevancy 44.29%

Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp

A:Windows 7 mouse freezing issues

This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.

http://www.howtogeek.com/howto/windows-vista/remove-old-drivers-after-upgrading-to-new-hardware/
 

http://www.techspot.com/community/topics/windows-7-mouse-freezing-issues.164226/
Relevancy 13.33%

ASUS ROG G751JY-DH72X Intel i7 2.40GHz 32GB Memory 512GB SSD GTX 980M 4GB Laptop

Windows 8.1
Intel Core i7 4860HQ 2.4GHz
32GB Memory 1TB HDD 512GB SSD
NVIDIA GeForce GTX 980M 4GB
17.3-inch (1920 x 1080)
Retail Price:
$2,999.00
Price:
$2,749.00
 

A:Is the CPU good on this computer for gaming?

I'd say it's a good CPU, but note that you won't be able to upgrade it in the future as it is soldered onto the motherboard.
 

http://www.techspot.com/community/topics/is-the-cpu-good-on-this-computer-for-gaming.213433/
Relevancy 23.22%

Hi guys

I have an intel DP55WB whitsburg a pair of matched 2gb sticks installed at the moment in slots 1 and 3 and nothing in 0 or 2.

I put a new 4gb stick of IBM ram in and get 3 long beeps and it keeps repeating. Everything goes back to normal when I take out the new stick. It happens in both slots 0 and 2.

Am I doing something wrong? With the new stick do I need to change the placement of my original ram?

Thanks!
 

A:New ram makes motherboard beep

This motherboard has support for DDR3 1333 /1066 MHz DIMMs. If you insert DDR3 1600 it probably will not work. Intel motherboards are famous for sticking to the specifications and not exceeding them. I own 2 Intel Motherboards.

I don't know if this is allowed but here is the Intel Specifications of the Motherboard.
http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dp55wb.html

Make sure you unplug the computer from the wall or the power strip before adjusting RAM DIMMS. All RAM is different. Normally you add it in Pairs to maintain the dual channel functionality. If you don't the RAM will slow down. It is not wise to mix and match different kinds of RAM. This can be related to capacity, latency, SPEED, voltage. Then some RAM may not work with other RAM due to incompatibility with the existing RAM. Some RAM may not work in your motherboard due to incompatibility with the motherboard. Some shorter DIMMS also use a different voltage and you cant mix different voltages. RAM is not just buy it and stick it in.
 

http://www.techspot.com/community/topics/new-ram-makes-motherboard-beep.212524/
Relevancy 22.36%

I get a bit jittery when I'm unplugging cable connectors (these images are just examples, I'm thinking of all types of connectors). What's the best way to safely unplug them?, pull from the cables or from the plastic case. What's your experience?. This pics are just a few examples of connectors. I'm posting this thread about any type of connectors. Thank you.


 

A:What's the best way to unplug laptop cable internal connectors on motherboard etc?

Many simply pull apart. Watch out for the ones with locking tabs though. I don't think you have anything to worry about as long as you take your time.
 

http://www.techspot.com/community/topics/whats-the-best-way-to-unplug-laptop-cable-internal-connectors-on-motherboard-etc.212863/
Relevancy 22.36%

Hello,

I have a HDMI cable for my monitor, with a nvidia graphic card...

but now I have a big doubt, I dont know if my motherboard's graphic card's imput is not working anymore or if its my graphic's card after a FLASHY BLACKOUT today...

my nvidia control panel is not working anymore... whenever I try using VGA or HDMI with my graphic card it doesnt show any sign in the screen... so im currently using my normal VGA motherboard's imput...

I tried using an old graphic card and its not working, I tested the VGA cable and HDMI cable and they are working perfectly...

yet, after I set the graphic card in the slot, the fan it start working, if I unplug the graphic card but leave the curent cable, it doesnt start the fan so I guess the motherboard's imput is working

so idk what's the problem here, I have all the drivers and everythign was working perfectly before the blackout
 

A:Broken motherboard slot or graphic card

Well... its too late and soon for expect an answer but...

I tested my graphic card in an old motherboard and it was working... it didnt load windows cuz of the diferent motherboard but connecting my VGA in my gpu worked, and the HMDI didnt work I guess because it need to be configured after windows loading etc
 

http://www.techspot.com/community/topics/broken-motherboard-slot-or-graphic-card.212639/
Relevancy 23.22%

So I made my first custom build pc recently and my specs:
Motherboard: Z97 GAMING 5
CPU: Intel 17-4790k
GPU: Gigabyte Geforce G1 GTX 970 4GB
Ram: 16gb ddr3

In my MSI software (MSI Command center) it goes around the 85 degrees when I play Battlefield 4 on ultra.
Is the motherboard temp the same as the CPU temp? and is 85 degrees too much?
I do use the stock cpu cooler.
Also I have a 200mm front and a 140mm in the back.
 

A:Motherboard at 87 Degrees?

Download HWiNFO64 and use this software to compare temps. Not saying there is anything wrong with the MSI software, but there is always a possibility that it is not reading the correct temps.
Also, do you overclock? Overclocking will affect the temps, especially if you are still using stock coolers.
 

http://www.techspot.com/community/topics/motherboard-at-87-degrees.212568/
Relevancy 13.33%

I have a HP Pavilion Elite m9600t CTO Desktop PC that has 2 drives. One which clearly says it can do lightscribe and burning, however, everytime I try to burn a disk using any software(I've tried a couple) it says no drive that can burn was found....

Config Flags 0x00000000
It's kinda driving me crazy to the point where I'm not sure if I'm wrong or its wrong. Here are the drives I have:

Drive 1

Spoiler
ATAPI DVD D DH16D3S
Device ID IDE\CDROMATAPI_DVD_D__DH16D3S____________________SH12____\4&A9C04EF&0&0.1.0
Status 0x0180200a Started
Problem 0x00000000 (0)
Service wd
Capabilities 0x00000000
Class CDROM
Manufacturer (Standard CD-ROM drives)
Drive 2

Spoiler
WJWDG UBKDE3C5U3 SCSI CdRom Device
Device ID SCSI\CDROM&VEN_WJWDG&PROD_UBKDE3C5U3&REV_1.03\5&36E5972&0&000000
Status 0x0180200a Started
Problem 0x00000000 (0)
Service cdrom
Capabilities 0x00000060
Config Flags 0x00000000
Class CDROM
Manufacturer (Standard CD-ROM drives)

 

A:My computer can't burn disks?

They both appear to be ROM drives when reading the spoiler info.

The best I can tell, here is the "ATAPI DVD D DH16D3S" which is a ROM drive.

http://www.newegg.com/Product/Product.aspx?Item=N82E16827106262
I can not find the second listing with the details provided. I'm assuming that is the drive pictured in the screenshot.

HP Pavilion Elite m9600t Desktop PC Product Specifications




Primary Optical Drive

Must select one of the following options:

16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA
Blu-ray player & SuperMulti DVD burner with LightScribe Technology
SuperMulti Blu-ray Disc burner with LightScribe Technology
​Click to expand...

There is lack of detail on HP's site as to which specific drives were used. The drive you pictured is not Blu-ray, so I'll assume the first listed drive is the one you have. The drive may need to pulled out of the case, to find out for sure which unit was used.
 

http://www.techspot.com/community/topics/my-computer-cant-burn-disks.212153/
Relevancy 13.33%

I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
 

http://www.techspot.com/community/topics/computer-will-not-power-on-after-i-moved-it.212377/
Relevancy 11.61%

I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp

A:I can hear "computing sounds" from my computer, through my speakers

Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
 

http://www.techspot.com/community/topics/i-can-hear-computing-sounds-from-my-computer-through-my-speakers.202182/
Relevancy 13.33%

As the title implies I m currently having issues the first major issue is that my PC is turning on off and which the second is that my other hard drive suddenly up and Issue Invisible & HDD Computer Grounding disappeared on me My computer started to turn on and off on me for no reason while I was trouble shooting my initial problem of the HDD when I fiddled around inside my case Eventually ripping everything out of the case and quot card-boarding quot the motherboard which it worked and stayed on and as I gradually put everything back together it was all good until I sat the motherboard back onto the brass copper studs that sits inside the frame and screwed it in At that point my computer started to turn on and off again which lead me to believe it s some manner of a grounding issue Computer Grounding Issue & Invisible HDD I have no clue on what to do at this point about going about this should I just get a new case made of plastic My current full tower case is all steel While I was watching a movie which was stored on my second hard drive is started to freeze lag repeat all that good stuff on me It froze my computer up completely and I was force to hard reset the computer when I booted my PC back up I found that my second hard drive had up and vanished on me So I went into my bios and saw it quot working quot I switch to ACHI to see if it ll make a difference but I got a BSoD so I left it at IDE At that point my computer gave me the option to quot repair windoe files quot or start normally Both options made my computer get stuck on the loading screen thankfully safe mode boots up fine So what could had caused this and how may I go about fixing it nbsp

A:Computer Grounding Issue & Invisible HDD

I also swapped out the PSU with a spare I had lying around, didn't get any power from it so I reused my old one. Now I don't have power from that one either. So besides the "missing" HDD and a suddenly a "no longer working PSU "I'm assuming the motherboard is bad, opinions?
 

http://www.techspot.com/community/topics/computer-grounding-issue-invisible-hdd.211499/
Relevancy 22.36%

HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks
 

A:Safe to use ATX PSU on a motherboard with an EATX power connector?

EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
 

http://www.techspot.com/community/topics/safe-to-use-atx-psu-on-a-motherboard-with-an-eatx-power-connector.181034/
Relevancy 13.33%

Okay so I am having an issue working out if my case will be able to hold my motherboard and graphics card Case Details Available Color Black Materials Steel body plastic Dimension x x mm x x inch (I Computer Building my First setup) changed W x H x D Net Weight kg lbs M B Type Micro-ATX ATX quot Drive Bays exposed quot Drive Bays exposed hidden quot Drive Bays hidden I O Panel USB x int USB x Mic x Audio x supports AC HD Audio Expansion Slots Cooling System Front mm fan x optional or mm fan x Building First Computer (I changed my setup) optional Rear mm black fan x pre-installed Side left mm or mm fan x optional Side right mm fan x optional Building First Computer (I changed my setup) Power Supply Type Standard ATX PS EPS V optional Maximum Compatibility VGA card length mm inch with HDD cage CPU cooler height mm inch Now Ill list my other parts I have They should Building First Computer (I changed my setup) also be links if they are not links just search the name WD quot Green TB WD EZRX SATA M RPM HDD Patriot Signature GB Kit Gx DDR - - PSD G KH Samsung SATA x Black DVD RW Gigabyte N - GI N SL- GL DDR GT PCI-E VGA Card Intel BX G Pentium G GHz MB LGA ASRock H M Anniversary Motherboard nbsp

A:Building First Computer (I changed my setup)

From the case details you have supplied (Motherboard type: Micro ATX or ATX and maximum video card length of 320mm) you are well within the parameters of having everything fit.
ASRock H97M motherboard is a Micro ATX board.
Gigabyte N730-2GI video card is 185mm in length.
 

http://www.techspot.com/community/topics/building-first-computer-i-changed-my-setup.210947/
Relevancy 22.79%

Current specs
Intel db75en
Intel i5 3rd gen 3450
Gtx 970 amp extreme edition
Samsung evo 120
PSU corsair vs 650
Liquid cooler h50 corsair

Currently they are on LGA 1155 mobo

I just killed my old motherboard
And now I am planning to buy i7 4790k

There are three motherboards I have in mind and all of them are asus z97 series based. Want to buy only asus..
Z97 A
Z97 k
Z97 c

I want to know that whether I should upgrade and get 1150 mobo and new processor or not!

(I have no plans to put dual gtx 970 bt plan to use secondary gfx card (gtx560) as phyx dedicated card)
If yes then
1. Which mobo I should go for and why?
2. Will the old h50 will be fittable on my new board or not!

Any new advise also appreciated!
Thank You
 

http://www.techspot.com/community/topics/motherboard-liquid-cooler-suggestions.210943/
Relevancy 23.65%

Hey Guys plz help me out in finding a Compatible MOTHERBOARD which can be upgraded further
Requirements
I have intel Q6600 Processor Core 2 Quad 2.40 GHz (4 CPUs)( I would like to overclock it)
Navidia 9800GT 1gb
Ram 4GB DDR3

I dnt knw if wifi and blutooth comes inbuilt in motherboad if ys thn also include them.
And also suggest a Compatible SMPS Socket(LGA 775)
 

A:Need a motherboard

What is your current motherboard?
 

http://www.techspot.com/community/topics/need-a-motherboard.209509/
Relevancy 44.29%

I have a Dell Optiplex 330 which has a 2.0 dual processor with 4gb of ddr2 ram. I have windows xp installed and I have a video card that has 1024 mb of ram. I am unsure of the brand of video card or further specs. I bought it off of ebay some time ago.

My problem is that when I try to play streaming video it wants to freeze a lot. I have already given more space for the virtual memory on my computer: I think 4 to 8 gb and I have set my hardware acceleration way down but these changes haven't helped.

I can download and play movies fine, I only seem to have problems when playing streaming video like from hulu.com or letmewatchthis.com which directs you to sites like: putlocker, deditv, sockshare, loomba, etc. I have used other computers and they don't seem to have as much problems with this so I hope that somebody knows what I need to do to solve this problem. Thanks in advance for any help.
 

A:Freezing problems with streaming video

When you say freezing, do you mean just the video freezes, or the whole system? If its just the video, it could have something to do with your internet connection. Is the computer on wired internet or wireless?
 

http://www.techspot.com/community/topics/freezing-problems-with-streaming-video.164671/
Relevancy 13.33%

I have done some research and have not found a solution to my problem.

I plug in my HDD (Fantom Drive, Green Drive) and I hear the 2tone sound when I plug it into my USB2.0 port.
My computer then searches for a driver. It decides a suitable driver for what I plugged in is called "Initio Default Controller". I got this information from the Device Manager.
I have looked in my "computer and right clicked "manage". The HDD is not listed. I have used more than one USB cord, ports, and 2 different computers with the same problem.
Both the computers are running windows 7 64bit. One is a laptop (ASUS) and a desktop(HP).

Can someone please help me with this problem.

Thanks,
Chris&Dawn
 

A:External HDD not recognized by my computer

So I said the facts but I never mentioned exactly what the issue is. sorry.

When I open my computer when the external HDD is plugged in, it's not there. I can't save files in it, open anything, it's just not there.

Also the icon that pops up that lets you "remove hardware safley" in the bottom right is not there. Also the external hard drive does not show up on any programs like "Defraggler" or "Speccy"

Thanks,
Chris&Dawn
 

http://www.techspot.com/community/topics/external-hdd-not-recognized-by-my-computer.176212/
Relevancy 32.25%

I recently replaced my AGP NVIDIA GeForce GT M with a newer AGP NVIDIA GeForce GT M I believe that the GPU processors are the same but noticed when changing over the heat sinks that the memory chips are of the Samsung variety the old one had Nanya The older card had a pre-windows boot BIOS where as the new one needed me to install new 512M 7600GT same Replaced GeForce NVIDIA with drivers from the Nvidia site using automatic driver scan does not BIOS boot My Replaced NVIDIA GeForce 7600GT 512M with same issue is that the Windows reported a BSOD on first reboot after the new driver installation stable since and have Replaced NVIDIA GeForce 7600GT 512M with same since increased the voltage by V to the card spec without BSOD and there is no solution in the Action center and Windows is still looking a month out Upon opening the Nvidia control panel suite to check why the newer card did not have any on board memory to aid Adobe rendering as the last card did use the M vram I found that the suite reports the card as a GeForce GS could this lead to a driver quot signing quot conflict and therefore the BSOD Computer Management reports the card as the GeForce GT as does the device properties driver tab Would it be possible to flash the BIOS on the newer card so that the M of vram is quot scalable quot for Adobe rendering use Thank you for reading nbsp

A:Replaced NVIDIA GeForce 7600GT 512M with same

If you're having a lot of trouble with it I would see about returning it if possible, I see this post is already a few weeks old but hopefully that is still possible..

You shouldn't run into that many issues, although if the card is manufactured by a different company then there "could" be problems.. In which case the safest bet is to go into Safe Mode, remove all drivers and reinstall fresh working drivers. Just to make sure nothing is being mixed up between the way the cards operate,
 

http://www.techspot.com/community/topics/replaced-nvidia-geforce-7600gt-512m-with-same.208853/
Relevancy 12.9%

With Broadwell and Skylake desktop CPUs expected to launch next quarter, the urge to upgrade my computer has never been stronger.

Read more
 

A:Weekend Open Forum: What CPU powers your computer?

Got an i5-2500k in my gaming computer, and a C2Q Q8200 in my home server. Because of the small enclosures they are in I have not overclocked them, with the watercooled 2500k being in a Prodigy case stuffed to the gills, and the Q8200 is in a 2U rack case.

Not sure about the server, but I know with Star Citizen in the distant horizon, I'm very compelled to upgrade around the end of the year. This is driven less by my CPU and more by my graphics card (watercooled GTX 570) and memory, which I only have 8GB.

edit: oh yeah, and my XPS 12 has an i5-4210.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-cpu-powers-your-computer.208477/
Relevancy 12.9%

A factory AMD or Intel heatsink is something I simply won't consider when building a computer. I acquired my first aftermarket cooler 15 years ago to assist in overclocking an AMD Athlon 500 (it reached 800MHz with help from a...

Read more
 

A:Weekend Open Forum: What heatsink / water kit cools your computer?

Mine is water cooled. Except instead of liquid its solid. And instead of water its aluminum. And instead of a pump its got a fan. Its actually a laptop.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-heatsink-water-kit-cools-your-computer.209240/
Relevancy 23.22%

I have a computer that I built and I am pretty sure the motherboard is going out on me... Any suggestions for a new motherboard that will support the parts I already have from my previous build?

MoBo - thats going out - : ASUS Crosshair IV Extreme AM3 AMD 890FX SATA 6Gb/s USB 3.0 Extended ATX AMD Moboo

Processor: AMD Phenom II X6 1100T Black Edition Thuban 6-Core 3.3GHz, 3.7GHz Turbo Socket AM3 125W Desktop Processor

Hard Drive: Seagate Barracuda 7200.14 ST3000DM001 3TB 7200RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive

Memory: G.Skill Ripjaws X + Turbulence II Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9Q-16GBXLD

Videocard: EVGA 02G-P3-1386-KR GeForce GTX 460 (Fermi) 2GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card

I built this thing around 2011 so any suggestions for something new that will work for me?
 

A:Motherboard for my build

Take a look here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007625 600158776
 

http://www.techspot.com/community/topics/motherboard-for-my-build.208651/
Relevancy 23.22%

Greetings. I have an Asrok Z77 Extreme 6 Motherboard.

I currently have an I5 3570K in there. I believe my Mobo is LGA 1155.

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.

Not sure if I will see any real increase in performance. I over clock the I5 to 4.2.

Any advice is welcome.
 

A:Question about my motherboard

Larsenex said:





Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.Click to expand...

Sorry, no. While your motherboard does have socket 1155, the processor i7 4790K is socket 1150. You'll need a new motherboard.
 

http://www.techspot.com/community/topics/question-about-my-motherboard.208311/
Relevancy 21.93%

Okay so I am starting this thread here seeing as how Clock and A10-6800K AMD Motherboard Wrong Setting Voltages Speeds the topic of the old one no longer applies to this situation I jumped ahead of myself trying to overclock this CPU which made me question the frequencies and voltages which are supposed to be set automatically by the motherboard I am having a tough time understanding all this I will post links to the exact AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds parts I am AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds using so whoever is keen enough to try to help will know what we re dealing with Motherboard MSI A X-G Gaming CPU AMD A - K Richland GHz Turbo Black Edition RAM Mushkin Enhanced Blackline DDR MHz PC V CPU-Z Screenshots After doing some AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds reading in regards to overclocking I have found out some details which are totally incorrect in my case For starters the FSB to DRAM Frequency Ratio from what I read is supposed to be some reported slightly higher ratios or something similar but CPUZ is showing which sounds absurd Also it s reporting the RAM as PC - at MHz and voltage at I haev Intel XMP enabled on the motherboard and the motherboard reports memory speed in BIOS at DDR- MHz Can someone analyze the above shot and information and clue me in as to what is wrong and what needs to be done I would really appreciate it because I am baffled I have no clue what the CPU-NB frequency and voltages are for so I don t want to mess with something I don t know anything about Anyway any and all help is much appreciated as always nbsp

A:AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds

Go into the BIOS and change the DRAM voltage to 1.60 or 1.65V and set the timing as u see XMP-2132
 

http://www.techspot.com/community/topics/amd-a10-6800k-motherboard-setting-wrong-voltages-and-clock-speeds.208183/
Relevancy 12.9%

Hi all. I've got this issue with my graphic card (fresh and crispy by the way - 1 month old). Few days ago I was just browsing web when suddenly blue screen came out of nowhere on my Windows 8.1 desktop PC. Ever since then when computer boots screen is filled mozaic-like with green squares, after few seconds it's changing to vertical lines. Obviously Windows window manager won't open at all, and it greets me with black screen. After I deactivated graphic card, and switched cable to main boards VGA port computer runs ok.

I've seen some similar threads on techspot suggesting that due to escessive dust 'consuption' GPU can overheat and irreverisbly burn therefore. Is it possible that the same thing occured here?




 

A:Green squares on computer boot, Nvidia GTS 250

It's what I've seen on the screen when one of my graphics cards has died. As it's almost new changing it shouldn't be a problem. It's more likely to be a faulty graphics card than dust. Double check that it's seating properly in its port and that the video cable is OK.
 

http://www.techspot.com/community/topics/green-squares-on-computer-boot-nvidia-gts-250.208163/
Relevancy 23.22%

Hello All I am having a bit of a strange issue that I have with CPU Motherboard or Strange issue never run into before Yesterday after getting home from the store I booted up my PC and started to play a game although I noticed that I was getting framerate stuttering It seemed to keep dropping a lot throughout my play So I started taking a look at some of my sensor utilities Strange issue with CPU or Motherboard When I opened Asus Probe II I noticed that it was telling me that one of my chassis fans weren t running Okay no problem it must have gone bad I than took at look at the frequency and noticed that my AMD FX- was only running at GHz per core I also checked CPUZ and had the same results So I booted to the bios just to take a look and noticed that it show my Chassis fan WAS running fine and that my frequency was at GHz per core as it should So I though that it must be a fluke Booted back into windows and again same issues So I shutdown and took the side off my case which is also where the Chassis fan it said was running is located Turned the computer back on and noticed the fan was running fine I logged into windows and noticed that seconds after windows logs in that one chassis fan turns off and the CPU underclocks to GHz multiplier All of the other fans in my case still running perfectly GPU running fine HDD s running fine Could it be possible that Asus probe II itself is underclocking my CPU If so what would be causing the fan to shut off My first thought was power-supply but I have no issues when stressing my hardware even in this state I am an IT consultant but have not run into this issue before Any help would be greatly appreciated PC Specs- ASUS m a r Motherboard AMD FX- CPU CoolerMaster HYPER N CPU Cooler Kingston HyperX Blu GB x Galaxy Geforce GTX Ti OC w PowerSupply Cougar Evolution Full Tower Case Samsung gb SSD Let me know if you need any other information nbsp

A:Strange issue with CPU or Motherboard

CPU temperature too high?
 

http://www.techspot.com/community/topics/strange-issue-with-cpu-or-motherboard.203184/
Relevancy 23.22%

Hi, I have a MSI g31m3 v2 s-7529 motherboard and wont turn on.
I change the power supply
I put on some themical paste in the cpu
I put away all hard drivers
but didnt work, only the fan turn on then its turn off
I think the motherboard dosent work.
 

A:Motherboard wont turn on

Please provide list of make and model for everything you have for this setup (CPU, RAM, GPU, Hard Drives, Optical Drives, Power Supply, Aftermarket coolers, etc.). We need to make sure that you have all compatible parts.
Also, have you tried to disconnect all things except the power supply connection to the motherboard, CPU & RAM and see if the motherboard starts?
 

http://www.techspot.com/community/topics/motherboard-wont-turn-on.208015/
Relevancy 22.36%

Wanted a gaming config ...
I have GCARD > NVIDIA GEFORCE GTS 450 (ASUS)
I NEED a good motherboard for gaming with intel core i3 4160.... 3.6ghz ,lga1150
my options are :
gigabyte/asus
B85 M D3H (or other b85 variants)
H87 M D3H (or other h87 variants)
H97
H81

all above are compatible but its really difficult 2 choose as the differences
even among same chipsets are too close(eg there are variants under same
h87)

all the above boards r in my budget!

games downloaded:
watch dogs ,cod(adv warfare,ghosts),max payne 3,MOH (warfighter),FAR CRY 4,ASSASINS CREED UNITY,Crysis 3 ,Dead Rising 3 ,Dead Space 3 ,GTA,LA Noire,Middle-earth: Shadow of Mordor,Need for Speed Rivals ETC ETC (thank god PIRATE BAY is up agn from COSTA rica)
 

A:Suggest motherboard for nvidia GTS450 & i3 4160 (gaming)

I would go for either the H87 or H97. It is really your choice in the end but all of the ones listed are good. ASUS, Gigabyte, and Asrock are all good board manufacturers.
 

http://www.techspot.com/community/topics/suggest-motherboard-for-nvidia-gts450-i3-4160-gaming.207743/
Relevancy 23.65%

Not sure if this is only confusing to me, but why are there so many different versions of X99 boards by EACH manufacturer?

I'm looking at Asrock, they have about 10 models: http://www.asrock.com.tw/microsite/IntelX99/

Then I'm looking at MSI and there are 6 models: http://www.msi.com/product/mb/#?category=Socket 2011-3&category_no=1179

SERIOUSLY, how to choose?
 

A:Which X99 Motherboard?

There are several ways you can choose a motherboard, but I personally look at the brand first before looking at features because some manufacturers are more reliable than others. I personally like ASUS and Gigabyte but ASRock and MSI are alright also. Now, onto features. There isn't really much you can differtiate between motherboards of the same chipset since most features are largely unimportant to the regular consumer. Usually the more expensive boards have more "features", whether relavent/important or not, is up to the buyer. I would check out this link.

If you still have questions, please ask.
 

http://www.techspot.com/community/topics/which-x99-motherboard.207791/
Relevancy 13.33%

I recently bought several Dell Optiplex GX computers online for repair I usually do a thorough review of what I am getting but this was a a with VGA Help DVI-D on port computer monitor using a cheap deal on a big lot and a few things slipped by me For one it takes a special power cord that I can t find for less than and there were none Help using a VGA monitor with a DVI-D port on computer with the lot I ordered one to test them with for now but that is not my main problem but if anyone knows where I can get those DA- adapter power cords any cheaper please let me know where My main problem is that these are the small form factor cases so they have no card slots I am dependent upon the motherboard options only So here is my problem the only connector for a monitor on the back of the computer is for a DVI-D which would be great if I had monitors with those connections The only connections I have on my monitors are the VGA I bought some adapters from e-bay that were supposed to convert the DVI port to the VGA which the connector did but I have no screen using this adapter and I am thinking that I was cheated Can this even be done this way I have always just changed the video card but this computer has no way I can see to do that it is all in the motherboard Does anyone know what I can do here I put a fresh install of io xp pro on several of then since that is what they came with They only have pentium s with hyperthreading and single core processors and I didn t think windows would help any If anyone knows what I can do to use these VGA monitors please tell me because without being able to put a video card in it I am lost sincerely cableman nbsp

A:Help using a VGA monitor with a DVI-D port on computer

Your best bet for Global spares is www.pchub.com.

As to the DVI to D-Sub you did the right thing in buying an adapter. It should work period. Did you get the joblot from eBay? Was it sold as untested? Are the PCs even powering on? Maybe there are issues with memory/cpu/motherboard....

http://support.dell.com/support/edocs/systems/opgx620/en/ug/A02/solve00.htm#wp1286323

Yes you have to be very careful when upgrading the CPUs for this unit as they follow a narrower roadmap. Top line CPU would appear to be a Pentium D3.4Ghz which worked in a GX620 usff with bios revision A11.

Good luck!
 

http://www.techspot.com/community/topics/help-using-a-vga-monitor-with-a-dvi-d-port-on-computer.172534/
Relevancy 13.33%

My computer is being running slow and is choppy also, I'm making sure the system is clean right now.
 

A:Computer slow and choppy

Problem solved, runned some anti-malaware programs and cleaned my computer.
 

http://www.techspot.com/community/topics/computer-slow-and-choppy.207403/
Relevancy 12.9%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
 

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
 

http://www.techspot.com/community/topics/windows-7-computer-says-connect-via-ethernet-and-ping-confirms-but-cannot-get-to-any-page.207373/
Relevancy 13.33%

Hey , I am not good at computers
plz help me to choose the best and cheap graphic card for my computer
the details of my computer are:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name PAWAN-PC
System Manufacturer WIPRO
System Model MS-7267
System Type X86-based PC
Processor Intel(R) Celeron(R) CPU 2.80GHz, 2792 Mhz, 1 Core(s), 1 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. V17.21B6, 9/10/2007
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name pawan-PC\pawan
Time Zone India Standard Time
Installed Physical Memory (RAM) 1.00 GB
Total Physical Memory 0.99 GB
Available Physical Memory 211 MB
Total Virtual Memory 1.99 GB
Available Virtual Memory 921 MB
Page File Space 1.00 GB
Page File C:\pagefile.sys
 

A:What's the best and cheap video card for my computer?

I don't think that GPU will make any difference in your 'rig'
 

http://www.techspot.com/community/topics/whats-the-best-and-cheap-video-card-for-my-computer.207332/
Relevancy 12.9%

When I am playing a video with any browser it is very choppy (sound and video).
Even Window sounds are choppy. It seems like if I move the mouse it gets worse.

Computer is very slow to open programs, even though the system idle process
is at 99% before starting another progam. This happens even when no browser is open and the
anti-virus software is disabled.

I don't know is this is a software or hardware issue.
 

A:Computer very slow. Choppy video and audio playback from browsers

Post this here:
http://www.techspot.com/community/forums/virus-and-malware-removal.28/
See if they can help with this problem
 

http://www.techspot.com/community/topics/computer-very-slow-choppy-video-and-audio-playback-from-browsers.207159/
Relevancy 12.9%

Hello all,

I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
 

A:How to change the Wifi password of an ADSL modem without a computer

Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
 

http://www.techspot.com/community/topics/how-to-change-the-wifi-password-of-an-adsl-modem-without-a-computer.207093/
Relevancy 23.22%

I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp

A:Not a bad motherboard or PSU. Still won't power up

Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
 

http://www.techspot.com/community/topics/not-a-bad-motherboard-or-psu-still-wont-power-up.151315/
Relevancy 13.33%

I need a computer that can handle video editing, mainly Final Cut Pro and Adobe Suite. Right now I have a 5-year-old MacBook Pro that can't manage FCP let alone run any programs smoothly and quickly. I can't afford a MacPro, so I've been considering iMacs. What's my cheapest option that will get the job done? I've heard you can buy PCs and install Mac OS. Would that be my best option? (Having PC capabilities would be awesome, for light gaming). I want to save money but I don't want to buy anything that isn't equipped to handle video editing well (cause then I'm just wasting money). I want to stick with Mac OS, but I don't care about the design or whatever, so I'd happily get a PC and put Mac on it, but I don't know how I would go about doing that. So if you have any suggestions or advice, please let me know! Thanks!!
 

A:Buying new computer/OS for video editing

What is your budget (how much can you spend) for this new computer?
 

http://www.techspot.com/community/topics/buying-new-computer-os-for-video-editing.207058/
Relevancy 13.33%

I have been thinking about buying a really good Gaming Computer, and now I have no idea which computer or specs to actually get. I want something cheap but don't mind expensive. I also heard that custom built computers are better than already engineered computers. I was checking out http://www.ibuypower.com/Store/Intel-B85-Configurator but like I said I don't know what specs to get for this computer. I want a computer that can support any game like any call of duty, minecraft, LoL, WoW, etc. and maybe posting videos on YouTube or others. Please help and thank you for your attention.

Please comment the specs
 

A:A good gaming computer

That is a good place to have a computer built as far as specs go there is no computer specs that have to be met, a good PSU is good in any machine, a reasonable mobo is needed in any machine. I prefer ASUS but they will be the highest if top of the line. if u are going to overclock make sure it is over clockable and make sure the processor is over
clockcable and yes they both have the ability, although the board will just put the # down. any video card will play games, but the newer ones should give u more frames, and last longer. as far as the processor AMD or Intel will be fine. and that site will e-mail u if the MOBO and processor will not work together.
 

http://www.techspot.com/community/topics/a-good-gaming-computer.206756/
Relevancy 23.22%

A time ago I was plugging in to many USB devices at the same time. I had received a message saying that a power problem had occurred. Since then I have been unable to use the two ports, and I have looked up multiple guides on how to fix this. Nothing has worked, and I have run out of options. I do not have the disk anymore for the drivers.
 

A:Universal Serial Bus on MotherBoard

Just a note to any one, Keep the driver disk, not that would have helped, but there is always a chance u might need to reinstall the operating system.
 

http://www.techspot.com/community/topics/universal-serial-bus-on-motherboard.206796/
Relevancy 12.47%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?
 

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.
 

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 23.65%

Hello all

I have a HP Pro 3405 Microtower PC and I recently reinstalled Win 7 Ultimate.
Now I did a very stupid thing, I managed to install a DDR 2 1GB RAM on a DDR3 DIMM slot, don't ask me how but I did. There was also a DDR3 2GB RAM already there.

I quickly took out the DDR 2 and restarted the system, since then I've been getting 5 beep at startup which means "pre-video memory failure". I reseated the RAM, nothing changed. I looked on google on how to fix it but nothing worked.

I ordered another 2GB RAM from Offtek, same specs as the original RAM stick.
When I tried to install it today, it still was giving me the 5 beep code.
I've tried reseating it, resetting the BIOS, taking out the PSU... nothing >.<

Have I fried my motherboard? Or is there a solution I haven't tried yet?

Thanks in advance
 

A:RAM 2x 2GB on motherboard

If you have tried all that you speak of, sounds like you really messed up your motherboard. I don't think there's much you can do. Maybe if you know what form factor the motherboard is, you can replace it with one like it. If you don't know more then how to replace the RAM in a computer, I would not recommend going strait to replacing a motherboard.
 

http://www.techspot.com/community/topics/ram-2x-2gb-on-motherboard.205839/
Relevancy 12.9%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
 

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
 

http://www.techspot.com/community/topics/seagate-external-hard-drive-not-showing-up-in-my-computer-it-is-detected.205926/
Relevancy 33.11%

I replaced my FX- s stock fan to a CM Hyper Evo and when I turned my PC back on it would crash during the quot starting windows quot phase The machine would just reboot and I would be back at the BIOS POST screen So I went ahead and cleared the CMOS which defaulted my RAM back down to the AM platform s native MHz After booting up and seeing my CPU s temperatures were great I went ahead and tried to get my now run 1866MHz CPU Replaced cooler, won't at old RAM RAM back up to its max speed The problem I m faced with is that I can only get it back up to MHz Whenever I set my speed up to MHz I get the Gigabyte BIOS message that there was a problem booting Either that or sometimes it gets to the quot starting windows quot phase before crashing and then sending me back to the BIOS POST screen again This happens when both manually setting the speed or using both XMP profiles At one point I did get it back up to MHz but the system would only detect one of my GB sticks which is obviously single channel as reported by CPU-Z I ve done everything here from switching between which DIMM slots I ve used but no matter what it won t boot with it set to MHz I even Replaced old CPU cooler, now RAM won't run at 1866MHz set my my memory s timings Replaced old CPU cooler, now RAM won't run at 1866MHz manually - - - CommandRate which didn t work Then I tried looser timings which still didn t work Neither XMP profiles worked which is how I had it at running at MHz previously I ve spent hours resetting the BIOS and trying different settings but whatever I do it just won t run at full speed I even stopped my GHz overclock to see if that would fix it I also raised the RAM voltage which did nothing I also tried using the FSB instead of the multiplier to get it up to speed but that would just continue the crashing trend I m really perplexed here guys How the hell did changing my CPU cooler make it impossible for my memory to run at full speed When I pulled my CPU out to change coolers maybe some how I damaged the chip s memory controller or is that just stupid for me to even think Maybe I can borrow my friend s FX- next weekend and see if changing chips will fix it I ll probably have to run memtest tonight now that changing the DIMM slots didn t fix anything For the record this is my RAM http www newegg com Product Product aspx Item N E Here are my specs just in case any help is REALLY appreciated guys as I d really love to run my RAM at MHz the way I paid for it run AMD FX- GHz Vishera Gigabyte GA- FXA-UD rev G Skill Sniper GB DDR - RAM MHz Gigabyte GeForce GTX GB WindForce Western Digital Black TB SATA-III HDD Antec Illusion case Antec HCG W PSU Windows Ultimate SP x nbsp

A:Replaced old CPU cooler, now RAM won't run at 1866MHz

An old system is likely to have voltage issues due to a degrading PSU. test and replace the PSU. Ram also may have suffered. I will start with a fresh PSU.
 

http://www.techspot.com/community/topics/replaced-old-cpu-cooler-now-ram-wont-run-at-1866mhz.202990/
Relevancy 26.23%

I replaced the mobo on my Dell 5510. Purchased from Dell. Sticker on mobo says BIOS ver A05. About every other day I get blue screen and physical dump of memory. My system info says my BIOS ver is A07. How do I go about changing BIOS? Is it as simple as pulling battery for 15 seconds? Some have offered this suggestion but I get a little worried at "friends" advice.
 

A:Replaced MOBO on Dell 5510 BIOS sticker on MOBO says A05, system in still has BIOS of A07

Removing the battery won't change the BIOS version. You need to download the version you require from the Dell site. From Windows you "flash" the BIOS. Take your time preparing for this. If anything goes wrong you will wreck your motherboard.
 

http://www.techspot.com/community/topics/replaced-mobo-on-dell-5510-bios-sticker-on-mobo-says-a05-system-in-still-has-bios-of-a07.206391/
Relevancy 22.79%

Hey guys, building a new PC, and I decided not to go too cheap with core components and leave the video card until later, while still getting everything in one go. Now this being the case, I will need to run non-dedicated graphics for a while (which are decent nowadays). Anyway, I want to go with the Gigabyte GA-F2A88XM-D3H Motherboard and an AMD A10-6800K Richland CPU,

Will the video outputs on the motherboard work with the APU and will I be able to use integrated video until I get a dedicated video card?

The Newegg page for the motherboard says "Integrated Video: None", so I am a little bit confused, is there no integrated video chipset because that's what the CPU is now being an APU?
 

A:AMD A10-6800K with what motherboard for integrated video?

I just built a home office build system for my parents using that exact board with an A4-6300 Richland in a Cooler Master HAF 912 (I really like this case for microATX boards). The board was great to work with and since the APU is on the chip itself my folks didn't need to purchase a video card.

So to answer your question: Yes you'll get your video.

* I would seriously consider getting an aftermarket cooler to replace the heatsink that comes with it.
 

http://www.techspot.com/community/topics/amd-a10-6800k-with-what-motherboard-for-integrated-video.205551/
Relevancy 23.22%

Hello I upgraded my cpu a while ago without checking if my mobo could run it.. worked fine on low usage but when I tried to stress the Cpu the pc died and wont boot/post. Is it the cpu or motherboard that takes damage from this? (Or both?)
I tried with my old cpu but with same result.
/ Andreas
 

A:125W cpu on 95W motherboard

Can you link us to your motherboard, your new cpu and your old one as well?
 

http://www.techspot.com/community/topics/125w-cpu-on-95w-motherboard.206146/
Relevancy 12.9%

Hi,

I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )

I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.

My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . : 172.22.155.137
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 172.22.155.138
And when I try to do nslookup:
C:\Windows\system32>nslookup
Default Server: google-public-dns-a.google.com
Address: 8.8.8.8

The default server shouldn't be that thing. please help. Nor the address

Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
 

http://www.techspot.com/community/topics/your-computer-seems-to-be-correctly-configured-but-the-device-or-resource-dns-server-not-respondin.206332/
Relevancy 22.36%

Hi,
So I have noticed my pc would shut off randomly and its because the 24 volt connector wasn't in all the way so when the pc would move slightly the connector would disconnect itself. When I go to push the 24 volt in all the way it wont clip onto the clip on the motherboard. It will stay in but it wont fully go in and I can easily just pull it out or it will just fall out from movement. Any ideas how to fix this?
Motherboard- http://www.newegg.com/Product/Product.aspx?Item=N82E16813130741
PSU- http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026
 

A:24 Volt connector wont fully connect to Motherboard

I think it is not 24 volts. it is a 24-pin(also labelled as 20+4pin) , 12volts main power connector.
the slots are designed so that the power connector will slide into the slot to form like a 'lock and key'. to remove it.
see to it that the power connector is inserted in the right direction as shown in the pics (towards the side):


edit, any moderator: please delete this post.
(my second post to this thread is more 'presentable')
 

http://www.techspot.com/community/topics/24-volt-connector-wont-fully-connect-to-motherboard.206189/
Relevancy 22.79%

Just bought a new board and I dont know how to get my geforce gts450 card working
 

A:New motherboard failing to show my card

Have you installed latest NVidia driver pack compatible with your operating system?




www.nvidia.com/Download/index.aspx?lang=en-usClick to expand...


 

http://www.techspot.com/community/topics/new-motherboard-failing-to-show-my-card.206126/
Relevancy 13.33%

Randomly, about 2-3 weeks ago my computer began to run slowly. If I'm just browsing the internet or using word documents and things like that it is fine and I cannot tell. The problem lies in things like playing games or running programs like itunes. I checked for all virus/malware, and there was nothing that I could see. I did a defrag and cleaned/cleared the registry and temp folder. Does this sound like it could be a hardware or driver problem? If its not a virus, could you give me a few other reason a computer would start doing this randomly.
 

A:Computer runs slow

Overheating? What are the computers specs?
 

http://www.techspot.com/community/topics/computer-runs-slow.179236/
Relevancy 13.33%

These are the specs I have so far,

MSI X99S Gaming 7 Motherboard
i7 5820K
Corsair Vengeance LPX 16GB (4x4)
2x MSI GeForce GTX 970 Gaming 4GB SLI
Cosair Hydro Series H80i
Cosair HX1000i 80plus Platinum 1000W (For future maybe a third gtx970)
Coolermaster Cosmos 2 Ultra
Samsung EVO 250GB (OS)
2x Samsung EVO 1TB (Main Games)
2x Western Digital Black 3TB (Other older games and programs)
Windows 7 Pro 64x

Other various fans (going with a black and blue theme outside and red and white inside)

Plenty for max setting at that resolution?
 

http://www.techspot.com/community/topics/parts-for-3440x1440-computer.205962/
Relevancy 23.65%

Hi, i currently have 2 x 1GB sticks of ram in my motherboard at the moment and wondered if i could buy a 4GB stick of ram and use it in conjunction with one of my 1GB sticks of ram, is this possible?
 

A:RAM 1GB & 4GB on motherboard

What are the specs of your pc? how many ram slots do you have spare?

DDR memory must be used in identical pairs for it to operate in dual channel mode. also if your using a 32 bit operating system only 4GB of memory will ever be used by your system.
 

http://www.techspot.com/community/topics/ram-1gb-4gb-on-motherboard.172809/
Relevancy 23.65%

So Im looking for a new motherboard here are my current specs MSI H a Looking Motherboard new for M-P LGA Intel H SATA Gb Looking for a new Motherboard s USB Micro ATX Intel Motherboard Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR Looking for a new Motherboard SDRAM - PCI Express x Intel Core i - K Haswell Quad-Core GHz LGA W Desktop Processor Intel HD Graphics BX I K G SKILL Ripjaws X Series GB x GB -Pin DDR SDRAM DDR Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR SDRAM - PCI Express x So this was my first build and it went great did make the mistake of getting a micro ATX and I have a massive case things that bother my about my current motherboard is that I dont have enough SATA plugs I have alot of hard drives and second I just got monitors and it only has PCI plug So Im also thinking about getting another graphics card to run of my monitors and having my current one run the other I was thinking of getting another GT but I do have a gtx sitting around would they work together Also if you have any advice about changing motherboards and not having to re-install OS clean that would be great nbsp

A:Looking for a new Motherboard

Well you also made the mistake of buying the GT 640 because the gtx 260 is fair amount faster.
 

http://www.techspot.com/community/topics/looking-for-a-new-motherboard.205517/
Relevancy 13.33%

A few months ago my computer started crashing when playing games. The screen would turn either black, white, (or once pink), the fan/fans would max out, and the audio would just change to a loud buzzing sound. This would continue until the laptop was turned off.
Around that time, one of my hard drives was failing. We thought, seeing as it fitted so well, that it was the problem. I've just had the hard drives replaced, and while it was running perfectly for a few days, it has now started to crash again, and far more frequently. Most of the time just after the desktop loads.

I'm currently running in safe mode, and that's perfectly fine. No crashing.
I've tried disabling my audio drivers, and rolling back my video card driver, but with no success. I'm assuming that as safe mode has no problems that it must relate to a driver, or, some software, but I have no real clue what I'm talking about.

My video card is the NVIDIA GeForce GTX 580M, if that's important. No idea what other information to include. Thanks for any help anyone can give me.
 

A:Computer crashes increasingly often

Go to C:\windows\minidump. Minidump files have a .dmp extension. If there are any .dmp files, select them all and right-click, sending the files to a compressed(zipped)folder. Upload this folder as file here
 

http://www.techspot.com/community/topics/computer-crashes-increasingly-often.205623/
Relevancy 13.33%

Hello guys..I have a same a problem..I cant play any of my mouse in my laptop..can u help me to fix it..thank you so much.

Moderator note: Moved from this thread: http://www.techspot.com/community/t...t-computer-is-not-frozen.183253/#post-1430301
 

A:Can't move my mouse, but computer is not frozen

You can't use any USB mice in your laptop? How many have you tried?
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.205615/
Relevancy 23.22%

Hi, I'm building a budget gaming PC but I don't know what motherboard to get. Here's the parts I'm planning on buying:

Intel Core i5-3570
Corsair Builder Series CX 430
Radeon HD7850

A H77 board will do as the cost of a K cpu and Z77 board (I presume) would cost way more. I'm thinking something around the price of a Asus P8H77-V LE.

Thanks
 

A:What motherboard should I get for my build?

It matters on what brand you buy. Some H77 motherboards come close to low end Z77 boards. Also, the 3570K is just $20 more and allows for you to unlock your system fully as long as you have proper cooling.

If you would like, I can take a look at your build and recommend better components if I see it fit. Just provide me with a budget .
 

http://www.techspot.com/community/topics/what-motherboard-should-i-get-for-my-build.203630/
Relevancy 13.33%

Hello all,

I'm reading this (http://wps.pearsoned.com/ecs_kurose_compnetw_6/) networking book.
The exercise no 13 of chapter one says:

P13. (a) Suppose N packets arrive simultaneously to a link at which no packets are currently being transmitted or queued. Each packet is of length L and the link has transmission rate R. What is the average queuing delay for the N packets?

(b) Now suppose that N such packets arrive to the link every LN/R seconds. What is the average queuing delay of a packet?

I've obtained these for (a) and (b):

(a): (N-1)/2 L/R sec.
(b): For nth LN/R: [n(N-1)-2(n-1)]/2 L/R sec.

1- Are these answers correct?
2- Is here a correct place for posting such problems?
 

A:Computer networking exercises

My my; Network theory. Not to dampen your efforts, but unless there's a switch, knob, or parameter that can alter the outcome, there's little practical use of this kind of information IMO.

As an example of a practical issue, the SACKOPTS paramater greatly improves TCP performance.
 

http://www.techspot.com/community/topics/computer-networking-exercises.205528/
Relevancy 12.9%

Hello,

I'm really new to the tech/ computer world, and know next to nothing about graphics cards. I was wondering if someone could help me figure out what graphics card I can upgrade my computer to (if I can upgrade at all) I was wanting to buy the new Sims 4 game, but after having played a very slow and choppy Sims 3 for years on this computer, I'm ready to actually play a game smoothly without it freezing all the time.

Here's what computer I have:
Compaq Presario PC SR5601P
Processor: AMD Athlon X2 4400
Dual-Core Processor
Memory: 1 GB
Hard drive: 250 GB
Graphics: NVIDIA GeForce 6150 SE Graphics
Windows Vista SP 1

Thanks!
 

A:Unsure of what graphics card my computer can upgrade to

Sims 4 System Requirements & your PC system results

For Sims 4 according to the link above, your CPU GPU and memory is lacking for even the minimum system specs. We can recommend a GPU, but that's not all you need if you plan on playing Sims 4. And if you get a stronger GPU, chances are you will also need a stronger PSU. If 300W's is all you have for power, you are limited to sub $100 graphic cards. Which would be fine for Sims 4, but then you also have a CPU and memory that needs upgrading.
 

http://www.techspot.com/community/topics/unsure-of-what-graphics-card-my-computer-can-upgrade-to.205298/
Relevancy 23.22%

Please suggest me a best motherboard (upto Rs. 6000) and a PSU for AMD FX-6300 processor.
 

A:Motherboard for amd fx-6300

Why not try the MSI Gaming 970 motherboard, its pretty inexpensive and a decent motherboard. Where do you shop?
 

http://www.techspot.com/community/topics/motherboard-for-amd-fx-6300.205255/
Relevancy 23.22%

I have an old Acer Aspire m3100 desktop and the case to it is broken, I have another case for it but I do not have the installation manual to show me how to reconnect all of the connections from this other case. How can I get or find the diagram showing how to make all connections to this motherboard. I'm trying to restore this computer for my grandson? any help would be appreciated, I've tried contacting Acer but they won't help unless the computer is under warranty and their third-party support doesn't do hardware issues?? I also downloaded a manual from online but it doesn't show the right info.
 

A:Motherboard Installation manual

Check this is the right motherboard.

http://www.gigabyte.com/products/product-page.aspx?pid=2500#ov

The manual is available in the support and downloads section.

Case wiring is pretty standard in most cases (no pun intended). Any details you have about the case your switching to would be helpful.

Motherboards mostly have the names of sockets screen printed next to them.
 

http://www.techspot.com/community/topics/motherboard-installation-manual.205022/
Relevancy 13.33%

I have been upgrading an old Compaq Presario SR5130NX.
I'm new to the computer scene, and decided to switch the PSU to 230V, just to see what would happen. It exploded. That's what happened. I installed a new PSU, and now, whenever I turn on the PC, there is an error message saying "CPU fan has failed" and the PC shuts down automatically before I can access the set up, or bios. My case is currently open however, and I can see that the fan is working so I think the motherboard got messed up, and I'm afraid this could have also damaged my graphics card and memory.

My motherboard is a m2n68-la (ivy) and here are the product specifications: http://h10025.www1.hp.com/ewfrf/wc/...&product=3436820&tmp_track_link=ot_search#N96

Can anyone tell me what's going on? Can this be fixed, or should I just get a new motherboard and start from scratch?

If I'm posting this in the wrong section, please point me in the right direction.
 

A:Is my computer dead?

Unplug from wall socket.
reset bios by removing bios battery for few seconds. reinsert bios battery.
check if cpu fan is still attached to cpu fan header and is still intact.
check 20+4 main power connector
check 4-pin auxiliary power connector (can be 4+4, depending on motherboard)
(check the motherboard for any burnt marks, bloated capacitors.)
plug to wall socket and turn on.

if unable to power up computer, then maybe the motherboard is dead.
if the motherboard has any burnt marks or bloated capacitors, don't use it as it maybe dead.

if you are going to build a new budget build:
processor: intel Pentium g3258
cpu cooler: coolermaster hyper 212 evo (or 212x)
motherboard: h81, b85, h97, or z97
memory: 4gb ddr3-1600 single memory module (or 2x4gb)
gpu: NVidia gtx 750, amd r9 260
storage: 1tb hdd
psu: seasonic 500w+
OS: windows 8.1 64-bit or ubuntu
case

alternate build:
processor: i5-4690k
cpu cooler: coolermaster hyper212 evo (or 212x)
motherboard: asus/asrock z97
memory: 2x4gb ddr3-1600 (or 2x8gb)
gpu: NVidia gtx 760 or amd r9 270x (or higher)
storage: 256gb Samsung 840 evo ssd + 3tb Seagate hdd or 2tb wd black hdd
psu: seasonic 600W+ for single gpu usage
OS: windows 8.1 64-bit or ubuntu
case
 

http://www.techspot.com/community/topics/is-my-computer-dead.204809/
Relevancy 12.9%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 13.33%

I've recently built a new computer for myself and has been running perfect for a few months. A couple days ago whilst gaming/browsing my monitor went into power safe mode and shortly after my computer shut off, I tried to start up again only to have the same problem occur , the only old parts were a graphics card and psu, I just got in a new gpu and installed it successfully. Same problem occurs. All fans are running properly including the heatsink , processor core temps are around 39 , everything seems to be running ok? Thoughts?
 

A:Very strange custom computer issue

Check event viewer to see why it shut down.
 

http://www.techspot.com/community/topics/very-strange-custom-computer-issue.204679/
Relevancy 22.79%

Hi, I just installed a gigabyte ga-z77x-d3h into my system (i5 3570), and even after reinstalling windows the computer is very glitchy, it takes ages to come on, freezes, and usb devices don't work half the time.

I'm thinking it's a dodgy motherboard. Any ideas?
 

A:System is very glitchy after installing new motherboard

Actually my first post was wrong, (this is someone else's computer) reinstalling windows fixed the glitches it just pauses on the windows logo for about five minutes before booting up.
 

http://www.techspot.com/community/topics/system-is-very-glitchy-after-installing-new-motherboard.204643/
Relevancy 22.79%

I got this desktop computer that has a Asrock board in it Model # FM2A75M-DGS and it comes up with the boot screen and I try to get in to boot settings or anything and it wants a password. I have no clue what the password is and I need help to see if it can be reset. I have looked on the internet everywhere and have had no luck. If I pull the battery will that reset it......help me please. Thanx
 

A:Forgot Password On Asrock Motherboard

Removing the motherboard battery and waiting a couple minutes before replacing it should reset it to where you can gain access again. It should help you. If not then reset your jumper to clear the CMOS. You can get the jumper resetting instruction in the motherboard manual.
 

http://www.techspot.com/community/topics/forgot-password-on-asrock-motherboard.204604/
Relevancy 13.76%

I recently got a broken computer as payment for a data recovery project however as it turns out the computer Which computer to use? isn t entirely broken it actually works fine all I had to do was reset the bios and remove the GPU There s only one part that was broken and that was the GPU reason for that was overheating since the Clud D sticker on top of the GPU wasn t in place to it has been blocking the fan from spinning as it should Anyhow now I have ended up with a dilemma what computer should I use The Which computer to use? specs below is what I can put together with parts that I got and with the parts that I currently use and note that the only quot real quot difference is the CPU CPU Intel Core i - MOBO Asus P T SE HDD Gb Kingston SSD Gb Tb GPU XFX HD PSU W ChieftecClick to expand CPU AMD FX- OC - GHz depending on the temp inside MOBO Asus M A LE R HDD Gb Kingston SSD Gb Tb GPU XFX HD Which computer to use? PSU W ChieftecClick to expand Additional Question - Is it possible to use both Corsair tri-channle TR XG C RAM at the same time as my current Kingston RAM which isn t Which computer to use? tri-channel - How much can the i be overcloed nbsp

A:Which computer to use?

Having to choose between the two you have, I would stick with the Intel i7. Follow the guide provided in link and you could reach 4 GHz overclock, depending on if your motherboard can handle the overclocking.
http://www.overclock.net/t/538439/guide-to-overclocking-the-core-i7-920-or-930-to-4-0ghz
I would not suggest overclocking too much if you are running stock cooling fan. It will create too much heat for the i7 to handle.
 

http://www.techspot.com/community/topics/which-computer-to-use.204502/
Relevancy 22.79%

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping
 

A:Upgrading CPU, question about motherboard compatability

Vidosoli said:





Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping Click to expand...

No, that motherboard is LGA 1156 while the i5 4670 is LGA 1150. You would need a new motherboard to go with that CPU>
 

http://www.techspot.com/community/topics/upgrading-cpu-question-about-motherboard-compatability.204453/
Relevancy 36.55%

Hi all,

I have heard of somethings like computer manufacturer and motherborad manufacurer. For example some time ago, when I had problem with my desktop PC, some asked me what's your computer manufacturer and motherborad manufacurer?
what's the difference between these two please?
 

A:Computer/motherboard manufacturer

Computer manufacturer Is most of the time is Dell, Hp,Compaq, Ausu are a few.
Motherboard manufacturer . Asus, Gigbyte, Asrock. Msi, Are a few. This is what they are referring to. When they ask you those Questions .
 

http://www.techspot.com/community/topics/computer-motherboard-manufacturer.204218/
Relevancy 23.22%

In hardware monitor, reading 13.2v on the 12v line.

PSU: http://www.newegg.com/Product/Product.aspx?Item=17-151-107

MOBO: http://www.newegg.com/Product/Produ...30790&cm_re=970_gaming-_-13-130-790-_-Product

Should I be worried? BTW im already about to RMA the motherboard because of broken sound. (might these be related?)
bbasically should I be worred about the immediate health of other parts or something
 

A:12v on motherboard reading 13.2v

What does your boards BIOS voltage monitoring read ? When you say hardware monitor I assume you are talking about the utility?
If this is the case then HW Monitor can have reporting issues with certain chipsets and boards.
If you're reading the voltage from the BIOS's hardware monitor then it could be a faulty voltage sensor (likely), or a PSU running out of specification. Checking the PSU shouldn't present much difficulty if you have access to a multimeter or just have an electrician test the output.
 

http://www.techspot.com/community/topics/12v-on-motherboard-reading-13-2v.204199/
Relevancy 22.36%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 12.9%

I have joined a computer (PC1) to a domain control server (2008), and user able to login using their domain user account - although recently I have found out that even though the computer (PC1) do not connect to a server, user still able to access using their domain account.
Is there a way for me to restrict domain account user from accessing the computer (PC1) if they are disconnected from server?
Hope my explanation make sense to you guyz.

Thank in advance
 

A:Prevening domain user from accessing Computer

Lots to be considered. Joining a domain is intended to give the company admin configuration control of all the company users.
This is normal, expected and even proper for the company to do this.




restrict domain account userClick to expand...

hmm; only the company admin should be able to do this and almost always it is done using some scripts, NOT by loggin into your PC. So - - who is accessing your PC remotely, the admin - - how do you know this occurs?

PCs joined to a domain usually get a replacement for PC Login - - the network form and that creates a link to the domain controller.
 

http://www.techspot.com/community/topics/prevening-domain-user-from-accessing-computer.204127/
Relevancy 22.36%

I ve got this legendary socket motherboard DFI LP UT SLI-DR Expert chipset nForce SLI almost new only LanParty - UT using BIOS DFI Del motherboard enter Cannot key Expert SLI-DR NF4 one SATA port is somewhat messed up missing those plastic parts from both sides bought this baby really cheap from well known Romanian e-bay like site okazii ro and I put it on my FX- dual core yeah THAT one and some KINGSTON value memory and tried to boot my rig Here is my problem now this board is Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard working those red diagnostic LEDS start next only one left so no quot LEDs of death quot syndrome for me and the onboard speaker beeps ONCE which I know is always a good thing but I cannot enter BIOS to setup as I need Del key on my PS keyboard is NOT working as it should I press the key and the result is nada nothing first I see the boot logo from Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard DFI after that Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard I see this error message quot CMOS checksum error - defaults loaded press F to continue or Del to enter setup quot and when I press Del I get nothig and when I press F key sometimes I see this message quot Verifying Pool Data and Backup CMOS OK quot and other times I see quot Sil SATA RAID Press Ctrl-S or F to enter RAID utility quot One more thing to add is that I can actually use boot menu selection using Esc key to selct HDD CD-ROM or some other option and this board actually can boot using CD DVD I already tried UBCD rescue CD and some Linux live distros to see if it s not a problem with my FX- processor and I m happy that it is working well is all good no problem here actually I ve seen it s name and working frequency Mhz at POST please help me to solve this problem with my mobo nbsp

http://www.techspot.com/community/topics/cannot-enter-bios-using-del-key-dfi-lanparty-ut-nf4-sli-dr-expert-motherboard.204105/
Relevancy 53.32%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,

Steve
 

A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP Support
 

http://www.techspot.com/community/topics/replaced-failed-motherboard-now-how-do-i-determine-model-number-and-which-bios-to-download.203956/
Relevancy 13.33%

Hi everyone

Could someone look over what I have and see if there is anything wrong with the list. oo and I have a SSD hard drive already and can someone recommend a CD drive and ram?
thanks in advance

Qty.Product DescriptionSavingsTotal Price
1
ASUS GeForce GTX 770 GTX770-DC2OC-2GD5 Video Card
Item #:N82E16814121770
Return Policy: VGA Replacement Only Return Policy
$399.99
$374.99
1
NVIDIA Gift - Watch Dogs
Item #:N82E16800995199
Return Policy: Standard Return Policy
$69.99
1
Intel Core i7-4770 3.4GHz LGA 1150 Desktop Processor
Item #:N82E16819116900
Return Policy: CPU Replacement Only Return Policy
$338.99
$326.99
1
CORSAIR CSM Series CS750M 750W Power Supply
Item #:N82E16817139061
Return Policy: Standard Return Policy
$129.99
1
ASUS SABERTOOTH Z97 MARK1 ATX Intel Motherboard
Item #:N82E16813132124
Return Policy: Limited Replacement Only Return Policy
$274.99
$254.99
1
NZXT Phantom 410 Series CA-PH410-B1 Black Computer Case With Side Panel Window
Item #:N82E16811146085
Return Policy: Standard Return Policy
$124.99
$104.99
Grand Total:$1,191.95
 

A:First computer build

Holy smokes.

Possibly, no one has commented because 1. people want to hear what you are aiming for - a gaming PC? CAD/CAM? Web-surfing? etc., and 2. you sure piled on a list of pricey items without any argument for why you need such pricey items when you can do nearly as well by sliding down the price range a lot, and 3. you have not said what size the SSD is - it might not be large enough to comfortably support operating system plus a few multi-player games.

A first-time build does not have to be the ultimate Win experience. Largely, builders work for a trade-off between cost and function. For your first build, you may want to build something that is straightforward, not too expensive, and can be upgraded in the future.

If money is no object, just get the most expensive of everything and enjoy. Just make sure everything is compatible.

I am not trying to be rude. Just kinda surprised by the price tags, and the lack of responses thus far.
 

http://www.techspot.com/community/topics/first-computer-build.204008/
Relevancy 19.35%

Hi, so today I unplugged my computer while it was still running by accident. Now it wont start at all, no lights, no fans, nothing. I am concerned that it may be a problem with my power supply (maybe fried it or something). And no its not a problem with the cord (I tried a different one), its not a problem with the power switch (the one that you switch to either circle or line) because I tried it both ways. However recently my computers power button stopped working so my brother hooked up an old keyboard to my computer so to start it I will press a key on that keyboard and it will start up my computer, so I have to keyboards one to start the computer up and one to type. So in summary im not really sure what the problem is but im 90% sure it has something to do with either my "power keyboard" of my Power Supply so yeah. Any help will be apreciated
 

A:Accidentaly unplugged computer without shutting down. Computer will not start.

Try and get a psu off a friend who might have a extra one. Go from there. This way you might be able to narrow it down. It really hard to say what happen .
 

http://www.techspot.com/community/topics/accidentaly-unplugged-computer-without-shutting-down-computer-will-not-start.203970/
Relevancy 12.9%

Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.
 

A:Don't see my external hard drive in disk management or on computer

Check this thread out: http://goo.gl/rxkBN
 

http://www.techspot.com/community/topics/dont-see-my-external-hard-drive-in-disk-management-or-on-computer.203836/