yes or no ?? will this have a bad effect on the computer ?/ any info is appreciated
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
I put a stick in...(256) and macine only counts it as 128...what gives. I was told PC133...would work in PC100 boards. Was I lied to?
I have used Belarc to check my motherboard, processor etc.
It said my FSB was 133 Mhz
It also said my Dimm currently fitted was 100Mhz Sdramm (2 x 128)
So..i think mistakingly i thought it would be ok to buy a 256md sdram PC133....however, the system only sees it as 123 giving me a total of approx 383.
IS this obviois or is there a setting i should alter OR have i bought the wrong type and need PC100
Any help much appreciated
I've seen some PC100 memory sticks for sale in my local paper. The problem is that my motherboard has a bus speed of 133Mhz. Is it worth me buying the chips and trying them out?
Right up front they will run slower and if you have pc133 Ram in there now it will slow them to 100 mhz. If they are cheap enough why not give it a try. You could probably take them back.
So let me start again First post here. I'm a programmer who doesn't meddle with pc parts. Well now has come the time!
I used the tool that Crucial provide on their website, which claims that my pc contains 2 pc133 slots and 1 pc100 slot (sdram).
It says I have max. capacity of 512mb. Will 2 256 pc133 sticks be ok? Or will performance default to pc100?
Also, what're the types of ram and will any other work with my pc? TIA.
Working with a motherboard with an Intel chipset... older school, the Whitney i810
Checking the specs it takes 100 and 166 SDRAM but not 133... it's the next series of motherboard chipsets that take 133 SDRAM as well
Currently running with 133 SDRAM though, and perfectly fine it seems... is it simply an issue that 133 SDRAM wasn't available at the time the motherboard was initially released?
Should I experience any problems or comeback using 133 SDRAM in the system?
You probably won't experience any problems at all. The new memory will run at 100 since that is what your mb supports, but it is capable of 133. That's all.
You might look for a BIOS update to see if it addresses the 133 MHz issue. But the subjective difference between 100 and 133 is so small, it hardly warrants the risk of flashing the BIOS, especially on an older machine without all the BIOS safety built in to the new ones.
i have a laptop that as far as i understood was compatible with pc100 ram. ive alot of people saying to get pc133. are these two backwards compatible with each other or are they just smoking crack? my laptop is a toshiba tecra 8100 with 256mb of pc100 currently and a 800mhz processor. thanks.
PC133 RAM is backward compatible with PC100. In other words it will run at 100Mhz speed. However, PC100 will not run at 133Mhz. I suggest that you go to Crucial.com and look up your laptop to see what it will support before buying any.
I just pulled 2 sticks from my friend's computer. 1 is pc133 and the other one has no label. He doesnt know what he has.
How can you tell or test if it's pc100 or pc133 ?
Put the doubtfull stick in on its own. download EVEREST HOME edition(used to be AIDA and if you have it that will do) and it will tell you the real speed.
I am upgrading a Demension 4300 w/ a 1.4gig P4 actual speed is 1395.
Crucial says it uses PC133 which it now has. BIOS says the bus speed is 100mz.
IF i put in PC100 will it work at 100 or 133 or not at all?
if you put ram of mixed speeds in the same machine, say 100 and 133. it will all run at the speed of the slowest module (100Mhz) in this case. unless the compatibility of the motherboard has other caveats. check the manufacturers ram support list for that.
Hi all question I was running mb RAM pc on my computer I thought that my memory went bad because of everything went very slow on me and i woule get memory errors i swaped my ram with another stick of mb but it was pc same problem it turns out it was a minor virus and i cleared it up i didnt want to go through the hassel of opening up the case so i left the pc ram in there but now i get blue screens when using kazaa or winMX this never happened with the pc ram i uninstalled the programsn and re-installed same thing i wonder if it is because the pc is slower by the way i am running win k pent so i am thinking of getting more ram my mBoard handles DDR do you think this may solve the problem could the downgrade from pc to pc cause this blue sreen issue that never happend in the past with kazaa and winmx if im PC100 ,PC133, or DDR? gonna open the case again it will be to add better ram your suggestions would be of great value thank you guys nbsp
Can you tell me please what is an easy way to identify memory?
Unfortunately there is no easy way unless you have a memory tester. The next easiest way besides taking the chance of installing it in a computer would be to obtain the data sheet or specs from the manufacturer.
hi I'm working on a friends computer. It's a k6-2 with an Apollo via MVP3 mobo. This computer only only has 64 meg pc100. I have a pc133 128meg ram chip. Is it ok to put this in even though it's pc133 ? I remember someone telling me a long time ago that pc133 will work on in a pc100 board.. Is trhis true? Would I have to go into cmos to tell it what kind of ram it is or would that be done automaticlly? Thanks again
HI, I have one module of sdram and I was wondering if anyone could tell me if it is pc100 or pc133. The chips have Infineon printed on them as well these numbers and letters hyb39s128800ct-7.5 It is double sided with a total of 16 chips . I don't have a spare computer to install them into and use a progam to detect their properties , I'll have to rely on your help.
I have a laptop which calls for PC100 SDRAM. Can I use PC133? What does the 100 &133 mean anyway?
I have a 400mhz amd k62 computer running on 100 mhz bus speeds. it says that it needs pc100 in the manual, but can i pop pc133 in there instead? If so, will I have to clock down the bus speed? Any help would be appreciated. Also, just wondering which type of ram is best out of the two?
I run 700mhz, K7. Get a second on this but I believe you can interchange them with no problems. I would go with the PC133 SDRAM.
I've just purchased two 256mb sdram PC133's from my local shop. I took in a PC100 ram for reference.
I put one of the sticks in my computer, which already had a 128 stick in (PC100) and the 256 started to smoke. I quickly took it out and luckily my computer is still working!
I put the other in my mates computer and it wouldn't run thru the usual start up sequence. Her old RAM was broken so she didn't have anything in the computer at all.
My question is, did the shop sell me the wrong type of ram - should I have bought PC100's or would the PC133's work? If they will work, why did mine smoke and her's not run at all?
Thanks in advance,
I recently purchased some memory for a friends computer from newegg.com His computer is a HP Pavilion 8750C it takes PC100 Non-Ecc SDRAM. I bought PC133 Non-Ecc SDRAM made by Rosewill. I put the chips in for him and it will not start-up and i cant figure out why. I then put the chips in my second PC that runs PC133 and they wont work in it either? Is this a memory chip problem or is it the wrong kind of memory somehow? I read you can put PC133 in a PC100 computer but it will only run at PC100 instead of the 133. Any help will be greatly appreciated!!! Thanks,
Get Memtest86 from http://www.memtest.org/
Read the instructions to make a floppy, then run it with different configurations.
Rosewill is a crap brand, return it for something reputable (Kingston/Crucial etc.)
I am wondering if my type of RAM might be causing me problems I have the following installed Slot Memory Module Properties Module Name Infineon HYS V GU- Serial Number C h Module Size MB rows banks Module Type Unbuffered Memory Type SDRAM Memory Speed PC MHz Module Width PC133 - Compatible? PC100 & bit Module Voltage LVTTL Error Detection Method None Refresh Rate Reduced us Self-Refresh Highest CAS Latency ns MHz nd Highest CAS Latency ns MHz Slot Memory Module Properties Serial Number None Module Size MB rows banks Module Type Unbuffered Memory Type SDRAM Memory Speed PC MHz Module Width PC100 & PC133 - Compatible? bit Module Voltage LVTTL Error Detection Method None Refresh Rate Normal us Self-Refresh Highest CAS Latency ns MHz nd Highest CAS Latency ns MHz Slot Memory Module Properties Module Name Smart Modular - Serial Number E h Module Size MB rows banks Module Type Unbuffered Memory Type SDRAM Memory Speed PC MHz Module Width bit Module Voltage LVTTL Error Detection Method None Refresh Rate Normal us Self-Refresh Highest CAS Latency ns MHz nbsp
i have a compaq AMD-K6 running around 466MHz. i want to add some RAM but don't know which type to use between PC66, PC100 or PC133.
i own a dell optiplex gx1 pc with a p2 400 mhz processor and 128 mb of ram with three chips of 64, 32 and 32 (168 sdram). these are pc 100. i have just ordered two 128 mb pc 133 rams. Can anyone please tell me if it is possible to combine the 64 mb pc100 ram with the two 128 mb pc133 ram?Thanks.
I won't expect that to work as the buss speed is to slow for the 133 to sync to.
I was wondering if I can upgrade my RAM speed to PC100 to PC133 or even better DDR or PC3500. would these work in my computer.
I have a friend with a compaq I think like a P-500
I was fixing it for him because he had a blank screen when
he installed some ram
I noticed some of the ram chips were PC100 and a couple were pc300, and a couple I could not tell
I put 128/100 with a 64/100 and it works fine.
But one of the 128/100 chips does not work at all....
Can you mix and match them like that and would it cause a problem?
pc 100 is memory that is rated to run at 100mhz
pc 133 is memory that is rated to run at 133mhz
No idea what pc300 is
some you can mix and match, some you can't, depends on the motherboard and what it supports for memory. The faster memory should just run fine at the slower clock speed but some motherboards won't recognize the faster memory.
I don't suggest mix and matching on amd processor's
I have talked to guys who own computer stored and he said that because my computer is older ( about three years) and is already running one sisded PC 100 RAM it will not work with PC 133 RAM. will PC 133 RAM work in my computer as long as it is one sided?
will it make my system crash?
Hi. I recently installed a 128MB PC133 SDRAM unit on my motherboard. Now my Windows98 system only uses that 128MB and ignores my 64MB PC100 card. If I swap the two cards positions, then I get the 64MB w/o the 128. When I go into CMOS, I find that the only two RAM speed settings are 10ns and 12ns. Changing from one to the other has no effect on the either/or SDRAM problem. How can I get the full 192MB SDRAM useable all at once? Thanks in advance for your advice.
Same problem occurs if you tried to mix 100 mhz with 66 mhz Ram. Only the one in the first slot will work. The only way to get around it, at that time, was to make sure you bought 100/66 mhz ram. I'm afraid you are going to have to buy your memory to conform to the existing memory, or junk the existing, and buy all new memory.
I recently tried to add memory to my home-built pc.
I started with 256mb in DIMM 1 and 128mb in DIMM 2. I later added 256mb to DIMM 2 and moved the 128 to DIMM 3.
Upon booting, the pc counted the new ram and all was well for only a matter of minutes. I started getting "Low memory" error messages which subsequently shut-down whichever program I happened to be in.
I removed the 128 stick from DIMM 3 leaving that slot empty and all errors ceased.
Any ideas as to why this happened?
Below are the stats for my pc.
AMD 750 @ 750, Epox 7KXA (Rev 0.4) Frequency set
to host clock +33, 450 watt ps (PC Power & Cooling),
Micron PC133 memory: 256mb DIMM 1 & 256mb DIMM 2, DIMM3 empty.
Sound Blaster Live, Diamond Viper 2,
Hard drives: 20.5gb IBM and a 20gb WD,
Standard CD rom and a HP CD burner. OEM Win98 se.
Norton AV 2001.
98 has issues with > 512mb of RAM. I'm sure someone will come along and explain it in much more detail.
Also it is questionable whether you get much value for money over 256mb, unless you're doing something like processing very large image files in Photoshop or similar, although RAM is pretty cheap nowadays. In other words, you're probably not losing anything by not having that last 128mb installed
Just down the page there's a thread entitled Too Much RAM memory which will tell you a lot
<a href="http://forums.techguy.org/showthread.php?threadid=46282">Too Much RAM Memory</a>
[Edited by Paul D on 07-01-2001 at 11:07 PM]
I have a Dell XPS R400 with 196 Mb (32/32/128) of PC100 SDRAM running windows xp. I wanted to upgrade memory. Dell claims the machine can handle ~380 Mb of PC100 SDRAM. I checked around on-line, and it appeared that I could install PC133 SDRAM on this machine. My machine does not boot after I installed a single stick of 128 Mb PC133 SDRAM. It will boot with the original PC100 SDRAM. Any ideas?
This discussion indicates that my machine can handle more memory: http://www.techspot.com/vb/all/wind...XPS-R400-with-Intel-SE440BX2-motherboard.html How can I verify this?
maybe the bored doenst like pc 133 ram
What is the CPU limit with PC133 memory? In other words what is the highest CPU in megahertzs
that a person can use PC133 memory with and get good performance and no problems?
Strange question, as the cpu limit is generally a limit of the motherboard rather than the memory. Motherboards that will use pc133 memory don't necessarily all support the highest processor that will use 133 memory.
Almost everything now uses DDR memory
Hi again! What is the CL designation? How do these two differ?
256MB $89.99 (USD) CT32M64S4D75 SDRAM, PC133 • CL=3 • Unbuffered • Non-parity • 133MHz • 3.3V • 32Meg x 64
256MB $89.99 (USD) CT32M64S4D7E SDRAM, PC133 • CL=2 • Unbuffered • Non-parity • 133MHz • 3.3V • 32Meg x 64
I was looking at memory at crucial.com.
I am running Windows XP on an Abit KA7-100 with an Athlon 700.
256MB PC100 memory fitted in bank 0/1
I added 256MB PC133 non ECC memory in bank 2/3
This new memory is not being recognized.
I am confident that I fitted the module correctly and it is locked in position.
I expected the extra memory to be automatically found but maybe I need to alter something in the BIOS.
Any advice will be much appreciated.
First make sure that both are the same type ie. unbuffered/ non ecc ....some boards will not let you mix and match.
Then you need to put your new stick in the first slot on the board, and the old one in the second. The fastest stick in my experience always works best in pole position, even though your board will default all memory timings/speeds to the slowest one.
Hope this helps.
I have an ABIT VL6 motherboard. The manufacturer website shows this motherboard as being able to handle 1.5GB pc 133 RAM (3 slots). I currently have a 128MB pc100 RAM chip. I purchased (2) 256MB pc133 RAM chips. The motherboard won't recognize either/both. when I have only the pc133 speed RAM chips in and boot the system, the computer gives me repeated beeps and won't boot up. It does the same thing when I have either/both combined with the pc100 RAM chip.
What do I need to do so the computer accepts either pc133 RAM or both pc100 and pc133.
I'm trying to updgrade a relative's computer--she has an older Dell Dimension L800r with 126 Meg of Ram and I want to up it to 256 or perhaps 512. It uses PC100 memory, but they don't sell that NewEgg. They do have it here:
for a decent price. Will it use other memory? If not, any links to a good place to buy that memory?
It will possibly also accept PC133 ram. I have successfully used PC100 or 133 on earlier Dell models. The faster ram will only work at the PC100 speed though.
other day my computer made loud long Beeps at Post Google listings said dram problem I normally run gb of ram in a - configuration I removed the card from B and then my system started fine with just one card in A wondered if it was just the card its-self so I placed the removed card into slot A still started up fine with just one card original B card installed in A then I placed other card which was originally in slot A into slot B to be memory bad slot B1??? back to - again back to long Beep at Post again as long as i leave B empty then my system starts fine motherboard manual says i have to have a card in A and B for duel channel to work--- right now i only got gb showing on start up page looked at System Device Manager and found a funny thing no yellow markers shown but -----all my Nvidia nForce bad memory slot B1??? Ware slots bad memory slot B1??? show quot no driver installed for this device quot but under the quot driver tab quot each shows the driver name and version listed driver update wizard for each said quot the correct driver software program was installed quot ran quot scan for hardware changes quot --- found nothing here is list ---Direct Memory Access Controller bad memory slot B1??? High Precision Event Timer nForce Memory Controller listed twice Numeric data Processor Nvidia nForce PCI System Management PCI Standard RAM Controller listed times Programmable Interrupt Controller System Timer all with no driver installed but driver name and version listed under driver tab did go to Nvidia and run their motherboard driver tool downloaded recommend program and after install and reboot no changes is my B ram slot problem a side effect of hinky windows os over time or is it just my motherboard dying of old age power supply old age should i do a complete clean reinstall of Vista ran Repair from my OEM disk which says no repairs needed build data---- P N-D ASUS motherboard GB Western Digital blue SATA HD No-Raid Intel socket Core Duo CPU Nvidia DDR GT GPU OCZ DDR mhz RAM running at GB at present time OCZ watt Power Supply Vista OS i built system in with no major problems until now replaced DVD drive and Viewsonic monitor---both quit working over last few years sorry about the edit have new DVD drive and monitor for awhile nbsp
When inserting memory module on the memory slot it was not aligned properly. When i turn on the power i noticed smoke and i immediatly turned off the power. Removed memory module and half of it was burnt, now my question is the memory slot damaged? Because its slightly burned in the inside slot, could i install a new memory module in that particular slot? or do i have to change the memory slot thats on the mother board?
You are probably lucky if you didn't kill the whole board. The slot is most likely toast. If you were brave enough to try another stick in the same slot, it may not work, or it may burn-up something else. I don't think changing the slot is really an option. Motherboards are not exactly repairable items.
I purchased a computer at a garage figure trying out some help pc133 will memory I which work and work wont to need sale a couple of weeks a ago for a couple of bucks the older couple said it was dead but I liked the case and was planning on moving my internet computer into that case it was a micron millenia max gs and the only thing wrong was the video card was dead I put in an old video card cleaned up the windows os and the computer ticks like a new watch according to the micron website the motherboard is a tazer tyran s http support mpccorp com apps specs asp I need some help trying to figure out which pc133 memory will work and wont work ID the total I need some help trying to figure out which pc133 memory will work and wont work pc memory is mb my current internet computer pIII is limited to mb of memory so I m thinking about buying sticks of pc memory for this micron it has sticks of mb for only a total of the micron website and several other memory websites say that this computer will use pc cl- unbuffered non-parity pin volt sdram dimm http www crucial com store MPartspecs Asp mtbpoid A D A CA amp WSMD Millennia MAX GS amp WSPN CT since pc is so expensive new I want to try and find some used memory but comparing all the pc on ebay for instance and trying to figure out which will work is ridiculous my question will most pc cl- unbuffered mb work in this computer what are the important specs what should I look for in the specs so that I get the right memory so it will boot thx nbsp
Anything on this page would work actually. And the prices are not too bad.
Buying ram off ebay is not usually a good idea, if you do make sure you have a very liberal return policy wth it. and buy only from a reputable company. Buying from an individual is not a good idea for computer components at ebay.
So recently my colleague tried to upgrade the RAM in his laptop, but he ended up messing up really bad he actually broke the only memory slot on the motherboard (yikes!). He asked me to take a look at it for him, and I was pretty surprised how badly he had messed it up (as in there's no way it could be fixed). I told him he might have to replace the entire motherboard, but he really can't afford that right now. I let him know that might be his only option, but I decided to ask here before giving up. The rest of the motherboard is fine; only the memory slot is broken. So is it possible to replace just the memory slot without replacing the entire motherboard? And if so, can anyone help me out with doing this? He does really need his laptop, so any help would be awesome.
How long can he go without a laptop?
That is a big project. You will need to be a master with a solder gun. Just getting the old part off without melting the motherboard will be an adventure. There are a LOT of pins.
First you will need to find the Brand and model # of the motherboard. You can use CPU-Z for that - it will list the info on the third tab.
Then, armed with that info you will search for the RAM SOCKET replacement. This is where it will get interesting, as the available sources will be in Asia. Shipping will kill you (for a $3 part). And you will probably need some translation skills too.
Your colleague really couldn't afford to mess his RAM Socket up. Now his best bet is to buy a new laptop.
Where is the memory card slot on the Pavilion 550-126? The slot on the front does not look like the right size. Is there a way to get a diagram of the front and rear functions?
Hi, Very interesting. The following link shows its specs: http://support.hp.com/ca-en/document/c04875975 It has 7-in-1 multimedia card readerFigure : View of memory card readerSupports the following cards:Secure Digital? (SD)Secure Digital High Capacity (SDHC)SDXCMemory StickMemory Stick SelectMemory Stick PROMemory Stick MagicGateWith Front I/O portsUSB 3.0: 2Headphone: 1Microphone: 1and Back I/O portsFigure : Odense back I/O panelUSB 2.0: 2LAN (Ethernet)HDMI: 2USB 3.0: 2Audio: Line inAudio: Line outAudio: MicrophoneI believe it is at the front but where. What is your card ? Is it on the list above ? Regards.http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/550-126-where-is-memory-card-slot/td-p/5690390
This is a hardware question for anyone that can help me out. I have tried to upgrade the ram in a dell dimension 5150, after seating the additional ram one of the existing slots containing ram started smoking with an obvious plastic burning smell. I have removed all ram and the burning is still occurring when powering on accompanied by a loud beeping noise. It's clear that one of the slots is melting. Need to know what my options are now. New board, or can this be rectified. Obviously the slot is now damaged and can't be used but there are three remaining. Never experienced this and unsure what has caused it to happen ? Any help would be greatly appreciated.
Please place your system specs, that way we could help you easier.:
System Info - See Your System Specs
The beeping noise, is it a one long beep? Or is it accompanied by another long or short beep?
I have a dell dimension 9200 and the motherboard can handle a maximum of 4gb of ram, but is there a limit per slot?
In other words does it have to be 4 x 1gb sticks of ram or can I use 2 x 2gb sticks?
The reason I ask is that I've had lots of bsod and crashes recently and after performing lots of tests using memtest it seems that 2 of the ram slots on my motherboard are bad meaning I only have 2 good ones to use.
RAM Memory Upgrade: Dell, Mac, Apple, HP, Compaq. USB drives, flash cards, SSD at Crucial.com will provide that answer for you.
According to crucial
Each memory slot can hold DDR2 PC2-5300, DDR2 PC2-6400 with a maximum of 1GB per slot.
I have a Tecra Laptop running Windows XP Professional The latptop has two slots A amp B in which you can add MB of memory each When starting Problem Slot Memory up the PC with both modules installed I get the error message quot Windows could not start because the following file is missing or corrupt system drivers pci sys You can attempt to repair this file by starting windows setup using the original setup CD-ROM Select R at the first screen to repair quot I have done as indicated and done a full repair on Windows XP but still get same message I then went to Microsoft Memory Slot Problem com to search the knowledge base According to Microsoft the above message indicates quot This issue may occur if your computer contains a hardware component that is either damaged or is incompatible with Windows XP quot I followed their instructions and it turns out that if I put just MB in memory Slot A the Memory Slot Problem computer starts up fine If I add it in MB in slot B I get the above problem At first I Memory Slot Problem thought it was a bad memory module but if I switch them they will both start up the computer in Slot A when used by themselves So it appears to me that Slot B is the problem somehow Any thoughts or assistance greatly appreciated nbsp
My motherboard just went out on my pc and I was wondering if there is something that I can hook up to my laptop that will let me read whats on my pc memory, kind of a external memory slot or something. I've been searching google for a few hours and I can't find anything and I know you guys always know what your talking about and answer very quickly. Any help would be appreciated.
Your actual data is not stored in the memory, its stored on the hard drive. And it's very easy to connect a hard drive to any other PC, there are many adapters for this.
Here's a version that simply connects a drive, either SATA or PATA(IDE) to a USB port without any enclosure: http://www.newegg.com/Product/Product.aspx?Item=N82E16812232002
Here's a version that basically converts the drive into an external drive that you can safely use that way: http://www.newegg.com/Product/Product.aspx?Item=N82E16817388017
This one only supports SATA hard drive with a connector like this: http://www.google.ca/imgres?hl=en&s...dsp=35&ved=1t:429,r:0,s:28,i:160&tx=102&ty=76
More enclosures to choose from: http://www.newegg.com/Store/SubCategory.aspx?SubCategory=92&name=External-Enclosures
I was told by Lenovo that one slot will accomodate 1 gig of memory, instead of using 2 half gig sticks. I was also told about something called "memory boost" as an external memory source to increase memory. has anyone heard of this? I want to run PhotoshopCS and need 1 GIG of memory and don't want to get new motherboard(the machine is long out of warantee). can anyone help on this issue?
"readyboost" is a feature only available for Vista, where it can use a USB memory stick as an alternative to paging back to the hard drive, it's not really in place of RAM.
it seems that the memory stick slot doesnt work anymore. in the device manager there is a yellow question mark and it says that it it not working. i would try installing the drivers but i kinda lost the recovery cd or what not. well before when i bought this, VAIO PCV-RX580, it was using Windows XP Home and now i use Professional. not sure if that makes a difference. im just wondering is there anyway i can get the memory stick slot to work again?
Try updating the drivers from here, search for your memory device.
Can anyone tell me where the RAM expansion slot is on a MITAC 7521 laptop, I can't find it. DOH!
look at the manual or call the manufacturer.
I just purchased my computer yesterday. I removed my Sony Memory Stick PRO Duo from my digital camera and was going to download them to my computer. The slot came with a Dell piece. My memory stick is too small. It did not come with an adapter and I have no idea how to get it installed. Any ideas???
It is likely that the two aren't compatible.
What model Dell do you have? The type of adapter that you need depends on what slots your Dell has.
Also - most cameras come with a USB cable. Could you use that instead?
I have been building computers for years and never found a reason for the placement of the memory slots on a motherboard. If you look at a board that uses an Intel CPU, the slots used are1-3 and/or 2-4. If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4. Does anybody know why this is? No, I'm not trying to make a better motherboard, I'm just curious enough to finally ask.
Thanks for any info anyone can give.
'If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4.'
refer to the MSI K9N - which see;
Dual channel with slots 1/3 or 2/4.
Assuming that you installed 2 Gb in 4 modules of dual channel ram and it is used from byte 0 to 2047 linearly, then assuming that the average 2 Gb ram install running XP uses about 50% of the Ram running avg8 (as example), you would get heating in ram modules 1 and 3 and none to speak of in 2 and 4.
Thus, heat separated components and better cooling.
Hi,my name is fajar from indonesiai want to add new memory to my laptop HP 1000-1b09auin CPU-Z, my laptop have 2 memory slot,but, i can't find other memory slot where is the other slot ? Thanks for help Best Regards,
Hi: If you look at the illustration in chapter 4, page 52 of the service manual, it appears that the memory slots are stacked on top of each other. http://h10032.www1.hp.com/ctg/Manual/c03762978http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/I-Can-t-Find-Other-Memory-Slot/td-p/5655384
I have a Dell Inspiron 6000 laptop and run Windows XP. my memory card slot recently stopped working. I used to be able to insert my memory card from my digital camera and download my pictures and now it no longer works. It doesn't even show up under My Computer under removable storage. Please help!
Put a card in it and:
Look in Control Panel - System - Hardware - Device manager
Expand the "Universal Serial Bus controllers" and see if a USB mass storage device is listed.
Also look to see no yellow ? or ! are shown, indicating missing drivers.
HEY GUYS GREETINGS i just joined earlier today im seriously in need of help my friend ask me to fix his pc i tried to replace the memory with mb ddr with his original memory mb and a mb of ram just then when replacing it and turning it on i heard a huge quot beep quot then i immediately shut the pc down then when i check it up i saw i slot, help Fried memory quot black spot quot on one Fried memory slot, help of the memory slot i figured it out its fried up luckily the mobo has two memory slot only one of the slot had been fried i replaced the two mb with the original ones the problems now is that the pc is kinda slow in starting up showing the bios and showing a quot blue error screen quot after and sometimes restarting over and over again i really need your help guys really really need it im counting on this site for any help you can give thanks raj philippines nbsp
You not only fried the memory slot, you have damaged the motherboard
actually, i was used to a pc with 160mb-ram - which is 32 + 128. now i own a faster one with one single 512mb-slot. but unfortunately, some problems occur: gta3 is collapsing all the time, i cannot copy a normal 1024x768 .tga-image to clipboard via corel (»low memory«) and after watching some freshly downloaded quake3-bots i got the message »low memory«, too. sometimes, even some multitasking surfing can bring me up to fully busy memory - is this a technical problem or am i asking for too much power!? i heard something like this memory-damage would lead to the problems i have.
speaking against it is a rather stable quake3 while in game and a fascinating stable 1nsane played also in 1280x1024 - without any stinky problem.
thanks and regards,
The memory module might be faulty or motherboard might not support 512M modules
My Hp Pavilion g tx did not pose any problems for years But a week ago I upgraded my RAM from to gb The shopkeeper inserted hynix gb nbsp ddr ram So Can Other... one I ram 8gb 4g in to my slot. upgrade memory ram that makes two rams in my loptop nbsp - Samsung Came when I purchased laptop years ago - gb ddr Hynix b ddr nbsp After a week my laptop stoped working Showing it two service center they said one of my nbsp memory slot is damaged and can't be used nbsp So now I had only one memory slot active with gb ram inside it My Question nbsp is - CAN I INSERT GB RAM IN ONE MEMORY SLOT SINCE OTHER ONE IS DAMAGED nbsp OF MY PAVILION G TX MOTHERBOARD nbsp If yes then please tell me - Of what type of ram should I be looking for Sepecification From where should I buy Crucial got gb ram which I can't usePlease reply ASAP nbsp Thanks amp RegardsPrince Sonihttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Can-I-upgrade-my-4g-ram-to-8gb-ram-in-one-memory-slot-Other/td-p/5714534
I have an IBM T30 laptop which has 2 slots for memory. Which is the primary? I am adding a 512 mb memory module and I want to know which slot should contain the 512 and which
one the remaining 256. BTW, even though I have a 256 in each slot most of the time it only
recognizes a single 256 module. Thanks for your info.
I'm working on a windows vista computer that would restart randomly and get a window exception bsod. I took out a memory module and ran memtest86 with memory in slot 1. Failed. Swapped it out with another memory stick but on the SAME slot on the motherboard. Failed.
Took that stick, put it in another slot on mobo. Passed. Took the other stick put in in that next slot, got the restarts again. Could it be that the memory slot that went bad on the mobo also caused the memory stick to go down with it?
Yes, that could be possible.
How can I upgrade my laptop memory? There isn't a memory slot at the bottom of the laptop.
Memory slots on this notebook model are placed under the bottom cover so when RAM modules must be exchanged or upgraded bottom cover must be removed.
Please note: on some notebook models RAM upgrade is supported by notebook owners and RAM upgrade steps are described in user?s manuals document.
I your case such upgrade is not supported and RAM upgrade should be done by authorized service provider.
Generally speaking bottom cover removal is not complicated but you should not do it alone. This will cancel valid warranty.
In my opinion, before you do anything contact nearest Toshiba service provider in your country and ask for help. Simply pick up some info about price and compatible RAM modules.
Can i upgrade my 4gb ram to 8gb? How many slot does hp 15 g005ax have?
Hi, It has: 1 customer-accessible/upgradable memory module slotSupports single-channel memoryDDR3L-1600-MHz Single Channel SupportDDR3L-1333-MHz Single Channel Support (DDR3-1600 downgrade to DDR3-1333)Supports up to 8 GB of system RAM in the following configurations:? 8192-MB total system memory (8192×1) or (4096×2)? 6144-MB total system memory (4096×1) + (2048×1)? 4096-MB total system memory (4096×1) or (2048×2)? 2048-MB total system memory (2048×1) Source: 3rd manual on the following link, page 2 http://support.hp.com/my-en/product/HP-15-Notebook-PC-series/6545564/model/7169754/manuals and the answers: (a) Yes (b) only one. Page 65 of the manual shows you part number and how to install RAM Regards.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-15-g005ax-maximum-memory-and-slot/td-p/5818321
Alrighty I m running an MSI K N Neo I ve had it for a while help. coded memory slot Color so far I ve just been running a stick in Color coded memory slot help. the first green slot Someone got me two sticks of to fill out my system I installed them but only recognized g of ram I checked the manufacturer s site to find http www msicomputer com product p spec asp model k n neo platinum a nice diagram about dual and single channel memory that makes no sense to me I believe all the sticks are dual channel they have memory modules on both sides of the ram if that is how you tell I m not sure All three sticks are kingston value ram they are pc all three work as I discovered after some musical chairs with memory I m currently running the two new sticks recognizing g of memory while I have my original stick in a box Can anyone help me out with the diagram or point me in the direction of something more helpful The manufacturer s website has an online tech support page that is under construction I just downloaded the manual but I was hoping for some easy insight Anything would be greatly appreciated at this point Thanks nbsp
Did you scroll down to the "DIMM Module Combination" and "MSI Reminds You..." and read what is posted there?
My Compaq nx7400 has a pop-out tray on the left side, with 4 slots for memory cards - I think ?! I've tried loading an SD card into the tray & pushing the tray in - but without success..... Anyone know the correct way to use this weird plastic tray thingy ?? Thanks
Hi, I have a new G72-25OUS laptop, I'm wondering how to use the slot on the left side, that says SD-MS/Pro-MMC-XD? I assume its to put a SD card in from my camera to upload photos, do I just stick it in and if so, how do I get it out? I don't have a manual, didn't come with one and can't find info in the help section. Hope someone knows how to do this. Thanks.http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/How-do-I-use-the-memory-card-slot-on-my-laptop/td-p/49651
i have a N1996 motherboard with two slots for 184pin memory. i have purchased a new module to slot into the second slot but i just get a long beep then the beep stops, then a long beep again etc.
i have just tried the original one in the second slot(on its own) twice, but still the beep. i have put the memory back into the first slot and it works fine.
any help would be grateful
would i need to change the bios setting, or do you think that the second memory bank is down.
I removed my memory card before ejecting it. Now my memory card slot doesn't work at all. I have done it before and got help on fixing but I can't remember how I did it. It is a readable card and I have tried several different ones so it's not a issue with card itself. The computer doesn't even see I am putting it in. Please help I do a lot of photo's and it's annoying to have find the computer plug everytime I need to get the pictures off.http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Memory-card-slot-not-reading/td-p/5789311
1. Expansion SlotWhat is the expansion slot specification for this model as we would like to add a dedicated graphics card with DisplayPort ? 2. MemoryHow many memory slots does it have on the motherboard ?What type of memory is required ?What is the maximum memory supported on the motherboard ?
Go to Solution.
Ok, Sorry looking up the model at Kingston and a couple other sites didn't show your computer and seeing I hadn't seen any I was confused. Based on what I have found maybe a Model from other country. With that said it looks like it comes with 2gig DDR3L Ram and is Upgradable to 8Gig Also looks like yours comes With 1 PCI Express x16 Slot. I am not sure with the PSU and with that slot if you would be able to upgrade to a different Graphics Card. GPU and size of case would put a huge limit on what could be able to fit... Jameshttp://community.acer.com/t5/Aspire-Desktops/XC-704-Expansion-Slot-amp-Memory-Upgrade/td-p/392919
sorry i like to seek your adivce on the following matter
i am using asus P7H55-M motherboard..i was actually using kingston 2x 2GB 1333MHz ram..recently i added 1 nex kingston 1x4GB 1333MHz ram..it was working fine until today when the com could not boot up..when i check, i found burnt mark on the 4GB ram and the memory slot..
my question are:
1) could i replace my motherboard if it is still under warrenty
2) could the burnt mark cause by the mismatching of the ram..
1) could i replace my motherboard if it is still under warrentyClick to expand...
I guess so, have you ever tried to establish the communication with the motherboard maker yet? Many of them has it own support lines that can provides the RMA informations.
2) could the burnt mark cause by the mismatching of the ram..Click to expand...
How? Did you actually force it to be seated in backward position? Look closely at the notch of RAM, they can only go one way, and you can feel the pressure of installing the ram if it goes in wrong way.
I just recently purchased a 1gb stick of Kingston ddr400 Ram for my pc.
Currently i have 2 x 512mb sticks in my 1st and 3rd slot of my MB. I currently use the Asus A7N8X-D Board. 3 Memory slots total. What would you suggest me to do for the order of my memory or does it even matter ?
Slot 1 : 512mb
Slot 2 : Empty
Slot 3 : 512mb
Eventually going to be 3gb Memory but Im not the best in these types of configurations.
Thanks ahead of time guys.
My printer's memory card slot isn't recognized by my computer. I am running Vista. Can anyone help with this. I contacted the printer's tech support and they tried but said it was a Microsoft problem.
Sounds like a tech support answer. What is the Brand and Model of the printer?
In Device Manager under your Printer is there a notification sign?
Hi nbsp I recently bought a notebook from HP the HP G with A - processor Inside there was a GB DDR L- Kingston memory module slot with HP u... speed G2 - 355 only Memory on 1600MHz K7H44ES shipped and there are two slots available nbsp I checked with CPU-Z and other tools and it showed a DRAM Frequency of MHz nbsp I added a GB DDR HP 355 G2 K7H44ES - Memory speed 1600MHz only with on slot u... L- Cruical memory module to the second slot and checked again with CPU-Z The DRAM Frequency was just MHz the memory size of GB was recognized correctly nbsp I thought it must be because of two different modules got for testing two other identical GB DDR L- Kingston memory modules and DRAM Frequency was again just MHz nbsp And if only one slot is used with any DDR L- I had available DRAM Frequency was MHz But whenever both slots are used it dropped to MHz nbsp What's wrong Do I need some specific memory modules for this notebook respectively CPU and memory controller nbsp HP Support suggested just that but I believe it's not because of this Perhaps the memory controller is working that way that it drops down to MHz if both slots are used But why should that be With none of my previous notebooks or pc this happened always the memory speed as specified nbsp And Google says that A - has a single-channel memory contoller for DDR L- which would be even faster but instead it runs with nbsp I currently use Windows Pro -bit if this of matter nbsp Cheershttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-355-G2-K7H44ES-Memory-speed-1600MHz-only-with-on-slot/td-p/5801100
I am using a HP Z400 Workstation Xeon Quad-Core W3565 3.2GHz, 12GB (3x4GB), 1TB, DVDRW, Windows 7 Pro.This the the model with 6 memory slots, so there was a possiblity for 24GB of RAM. When I populate the remaining slots 4, 5 & 6 with 4GB DIMM, I get errors on boot up for the newly populated slots. I am unable to configure for 24GB.I did discovered that the DDR3's that I am using are non-ECC. The system has been running fine with the (3x4GB) setup. Is the non-ECC preventing the 24GB configuration from working?Thanks for any help you can offer.
Yes it is. It is not possible to install standard PC and server memory, I've never seen a system of any brand which supports such a configuration. Officially, the Z400 supports only ECC unbuffered memory modules.However, it will also run with standard DDR3 RAMs, unsupported only means that HP Customer Service won't help you.There are some reports that even 8 GB Modules work, but that's another story, 24 GB runs fine. Mixing different types of memory is generally a bad idea.Use either ECC unbuffered (which is recommended) or non-ECC, preferably six identical modules.DDR3 are relatively cheap, even those with error checking and correction. Good luckhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z400-6-slot-memory-configut-ration/td-p/5571112
Hi, can anyone tell me how to access the second slot in my e-system 1511. I was told it was under the keyboard. I can unclip the clips but there seems to be something else holiding it down. I ve looked at the back and can see no screw with kb next to it to indicate that, that is the screw for the keypad.
Appreciate any advice. I have upgraded the first memory. I ordered 2gb and this came in two of 1gb so I am assuming there is a second slot.
I have installed the new windows 10 in my PC, before this i had windows 7 home premium. i have a memory card adapter in which i used to slid my micro SD card and was able to access it when i had windows 7, but when i upgraded to windows 10 and inserted the memory card reader in the slot it stopped detecting, their is no action and i am not able to access it.
System: Dell Studio 1558 2010-11 Model.
Dell Studio 1558 has not been tested by Dell for Windows 10 operating system you will not find drivers for it. However, please use the card reader Windows 7 driver and install it in compatibility mode.
Please let me know if this works.
When I populate slot2 with 512mb noname ddr1 I cannot boot into windows, BIOS comes up ok and memory tests ok. This is intermittent but now almost 90% of the time it won't boot. slot1 contains a 1GB kingston pc3200.
With no ddr in slot2 it boots ok and with a 1GB stick (corsair) it boots ok. I guess it was the noname 512MB stick but seems strange it passed all the memory tests (from ubuntu grub loader)
MB is an Asus K8S-MX
hi what happens when you put the 512MB stick in slot 1 and the 1gb stick in slot 2? kinda surprised your running win7 64bit on just 1.5 gb of ram.http://www.sevenforums.com/hardware-devices/361167-wont-boot-into-windows-2nd-memory-slot-filled.html
Here s a VERY strange problem Inspiron s w two G DDR DIMMs installed nbsp was up and running when it suddenly turned off with flashing amber SLOT Inspiron Failure? 660s Memory power light and two-beep code indicating memory problem Inspiron 660s Memory SLOT Failure? When power cycled the same symptom occurred flashing amber amp two-beeps Troubleshooting showed DIMM slot was bad Item on p Inspiron 660s Memory SLOT Failure? of User s Manual If either G DIMM card was installed in the DIMM slot Item on p the system would boot OK Both slots populated Flash beep DIMM slot populated with either G DIMM Flash beep DIMM slot populated with either G DIMM Boots OK After quot fixing quot the system by de-populating the DIMM slot full Dell Diagnostics online version were run with all PASS results Memtest passed as well QUESTIONS How could a memory SLOT not memory card suddenly fail in the middle of operation The system was up amp running but nothing was being done on it at the time of failure Did a part of the chipset fail Is there any way to fix this problem short of replacing the MoBo Thankshttp://en.community.dell.com/support-forums/desktop/f/3514/t/19977521
I m sorry this is so long but please take the time to read it all because I have already taken a LOT of steps to solve this myself I am an IT Professional and have been Memory locks Stick up unless in is Vaio slot since the s The computer I m having the problem with is mine it has always had up-to-date AV and has Automatic Updates on I check it every so often with SpyBotS amp d or MalwareBytes and it has NEVER had anything besides tracking cookies It has been on a secured wireless network out in the middle of nowhere doubt anyone would hack it with both a hardware firewall at the DSL entry point and Windows Firewall on It has never had a Memory Stick in its slot before now The only removable media I ve ever used with it is a big USB disk for backups which unfortunately has not been done Vaio locks up unless Memory Stick is in slot in about months Vaio locks up unless Memory Stick is in slot I ve never had Limewire or any other risky stuff installed on this computer I don t use FaceBook or any of the social networking I don t surf any type of risky sites Vaio locks up unless Memory Stick is in slot and I don t download anything onto this computer Its the safest computer on the planet The computer is a Sony Vaio K-series laptop probably - years old running XP Home SP and IE Here s the sequence of events as best I recall them - everything is fine I m looking up something boring like outboard motor parts Its supposed to storm tomorrow so I am going to unplug it Automatic Updates are downloaded and ready to install so I choose quot Install Updates and Shutdown quot It does its thing in a normal amount of time no indication of problems and shuts down I unplug the charger and put it away - I get the computer out plug it up push the power button It gets to the WinXP logo with the progress bar underneath The bar rotates around a couple times then sticks I wait probably minutes and nothing ever happens I notice the orange light is on beside the quot Memory Stick quot slot I boot it up in Safe Mode That works I check the logs for the Windows Updates everything appears to have went fine Check Event Viewer for some clue as to what happened nothing Check Device Manager no splats Everything looks fine Hmmm maybe a fluke try a normal reboot again Exact same result hangs at same place with orange light on beside quot Memory Stick quot slot So I boot into Safe Mode and uninstall all of the Windows Updates that have the date on them I made sure I did them in the correct order so all dependencies were resolved Tried another normal boot Nope hangs at same place with orange light on beside quot Memory Stick quot slot OK now I m scared So I go to my other PC the desktop and do some Googling of the symptoms I find one in particular a malware-infested Sony VAIO locking up with Memory Stick light on So its probably malware Since I already have the latest version of Norton AV I run a full scan on the Vaio with that Comes up clean Then MalwareBytes latest version comes up clean Then I reboot into Safe mode with Networking Then run Housecall online with Trend Micro comes up clean Just for S s amp G s I even try their New Beta scan clean Then Kaspersky s online scanner also comes up clean Then BitDefender again clean Then as a last resort I disable NOrton s real-time protection and run Combofix Combofix did not find anything I looked through its logs but have to admit I m not that good at fixing something manually I don t know how to interpret Hijack This logs I always give up before then and reformat But I have a bunch of old software that I don t know the registration keys for so I do not want to reformat At this point I kinda panicked and tried Restoring Windows to a Restore Point on That hosed my IE Windows was unable to restore back to the Restore Point that Combofix had just created - So I dinked around with it reinstalling IE and Java Finally got that working again I had read in the post about the malware-laden Vaio that his booted normally if he pu... Read more
I am happy to report that I have solved the identical problem you describe involving system hang on the Windows XP splash screen and the yellow memory stick light turning on at that point. Similar to your experience I could boot in safe mode but no way to get into a normal boot. As this was a client machine on a limited budget I could not waste a lot of time and contacted the client and got authorization to do a full system restore figuring it would eliminate any software issues (conclusion based on ability to boot in safe mode it seemed reasonable?). Much to my surprise after a full factory restore from the OEM restore DVD the symptom was still there, in fact the restore could not complete because it required a full normal boot to finish the restore. So now I was really perplexed, no way it was software (given that the drive had been fully erased and reformatted), so that only leaves hardware and the memory stick module seemed the likely culprit and on a hunch I tore the bloody thing apart (keyboard, rear hinge cover, and all screws from bottom of the case) which allowed be just enough clearance to get inside and remove the ribbon cable from the memory stick module and presto the problem is resolved and unit now boots normally and I am in the process of bringing the system back up to current standards with all the updates, etc, and have already done multiple reboots with no problems. So I suspect you will find similar results once you go through the difficult task of tearing it apart as our symptoms were identical.
Trust me it has nothing to do with virus or malware activity, it is an actual hardware failure!!
Hi all I am having a strange problem with my PC I have a year old motherboard Leadtek Winfast K nCR D Pro and a new Athlon XP and new x GB corsair value memory - PC slot issue weird Resets sticks My PC is randomly resetting itself even sitting at the bios screen just as though the reset button had been pressed I disconnected all the drives and it still happens I have installed a new PSU and it still happens This is the bit that confuses me I PC Resets - weird memory slot issue have three dimm slots one black two blue for dual channel If I put either of the chips only in the black slot I get NO problems at all If I put either of the chips only in either of the blue slots it randomly resets this happens whether I have a single chip in one of the blue slots or both chips in both blue slots Obviously when there is only one chip in one blue slot the bios does not show dual channel enabled Is there any difference in the way a motherboard deals with the memory in the blue slots which could indicate a problem with the memory or is it likely the motherboard is dying Thanks for your help nbsp
Assuming the RAM is correct for your PC go into BIOS and set DRAM or RAM or whatever your RAM is listed under to Auto, reboot and see if that helps. ALso, make sure that you have the RAM in the correct slots for DDR (probably the two blue as you stated).
(NEWBIE/FIRST POST)I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016). Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards. All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer. I currently have all the latest Windows 10 software drives installed. Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?
I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved. The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it. Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you. But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Memory-Card-Slot-Not-Functioning-Brand-New-Computer/td-p/3447370
I have a Toshiba A S running Windows Vista Home Basic the max memory upgrade is X GB which I purchased via no card 2nd memory recongnition Toshiba A135 slot, newegg com and installed When I turned it on black screen and no boot up Basically it will only reconize one GB of memory doesn t Toshiba A135 2nd card slot, no memory recongnition matter what slot as long as it is only one I tested both memory chips both work in the computer and in either card slot just not both chips in both card slots What Toshiba A135 2nd card slot, no memory recongnition the heck Even stumped the Geek Squad guy at Best Buy he seemed to think it the mother board issue It runs much better on the GB then it did with the MB cha Computer Toshiba A135 2nd card slot, no memory recongnition should be able to run both GB card in each slot and reconize about to of the memory if it would run both cards at the same time I did upgrade the BIOS from to as most of the blogs suggested-still won t recognize the nd GB card nbsp
cant find your lappy on toshiba site , same thing happened with me and was the bios update i needed so re check its the correct update
have you tried 1x2gb and 1x what you took out??
THE ISSUE Hardware issue A broken memory stick slot on the HP Pavilion n DETAILED EXPLANATION I don t know how this happened anyway but the catch on the second slot tray is broken causing one side of the installed memory stick to hang loose and not snap in or fit securely resulting in Windows not registering or recognizing that there is in fact a RAM memory stick actually in the second slot CONSEQUENCE I now have only one good RAM memory slot ACTIONS TAKEN SO FAR Purchased and installed nd RAM memory stick in the problem slot PRODUCT SPECS Memory Type DDR PC slot Pavilion broken A stick the on 753n HP memory DDR PC DDR non-ECC RESULTS Problem still exists Crucial s online scanner and the System Specs under My Computer still reads like below Memory DDR PC DDR PC Memory Type DDR PC DDR PC DDR non-ECC Maximum Memory GB Currently Installed Memory MB Total Memory Slots Available Memory Slots MB EMPTY SUGGESTED ACIONS FROM TECH SITES A Replace the mother board OR B Replace the MB stick that s in the good slot with A broken memory stick slot on the HP Pavilion 753n a GB stick THE PROBLEM A broken memory stick slot on the HP Pavilion 753n WITH B According to Crucial s com s Expert Online Tech where I bought the extra RAM this pc HP Pavilion n is too old and cannot handle a GB stick because it s basically an obsolete pc the OS operating system will be severely affected causing crashes and other instabiity if you put a GB stick of RAM in a slot therefore it is not recommended to put a GB stick in a slot MY QUESTIONS Is he right I ve received both yes and no responses so far but no definitive answer What other solutions are there What s involved in remanufacturing or replacing the board Should I contact HP to get a price quote to fix the issue THANK YOU All suggestions reviewed nbsp
is the system memory slot basically provided for au003tx is samsung 's 2133 mhz or not? i actually brought this laptop one month ago and am shocked to see the specification tht the memory slot belongs to samsung i can't get to know about that i tried very hardly till now please answer me so that i can do something if i'd been cheatedplease do reply
@sree_parimi? The slot may have a Samsung memory stick in it but you could install any name brand in it. DDR4-2133 Dual Channel Support (DDR4-2400 bridge to DDR4?2133) Your manual here. http://h10032.www1.hp.com/ctg/Manual/c05228250 REOhttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/is-the-system-memory-slot-basically-provided-for-au003tx-is/td-p/5743677
ok memory reader card is duo slot? need it help even pro in i laptop possible? stick SD i was bored and got some homebrew for my ds but i needed some files off my psp memory stick and couldnt be bothered to charge memory stick pro duo in laptop SD card reader slot? it is even possible? i need help it as its dead and i cant find the charger so i thauhgt quot ill try it in my laptop sd card slot reader quot and after a some moments later bang autorun pops up with the memory stick icon on it all the files are accessable aswell now my question is HOW DID THIS WORK i looked in the slot and the pins are much to big spaces to fit all the pins on the card everyone know theres a size difference between sd and memorystick how did it work i didnt think there were duel sd and memory stick readers all the usb ones if seen have seperate slots this is memory stick pro duo in laptop SD card reader slot? it is even possible? i need help bugging me as it shouldnt that and i have to get it in just the right place to get it to work it doesnt seem to fit snug in the slot any idea on how the hell this is working thanks nbsp memory stick pro duo in laptop SD card reader slot? it is even possible? i need help
I purchased what was described as a 'Dell 3588D Motherboard Slot 1 Dimension
XPS-B' motherboard from eBay. It uses Rambus memory sticks, but has 3
memory slots to fill, while every motherboard of that type I have researched only
has 2 memory slots. In addition, most of the Series B desktops I looked into
seem to be limited to 512MB of memory.
Because my motherboard has 3 memory slots, would I be allowed to insert three 256MB memory sticks, giving me a total memory of 768MB? I'm told that you should
not exceed the required limit of memory. Would someone care to comment on my
Just try it, it'll either work or it won't work.
I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016). Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards. All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer. I currently have all the latest Windows 10 software drives installed. Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
Go to Solution.
I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved. The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it. Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you. But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
Hello I have this odd problem in my Dell Latitude D core duo where one of work D520 memory slot Dell doesn't Latitude the memory slots isn t working anymore Just yesterday the Laptop would not startup but lights on the front panel came on Dell Latitude D520 memory slot doesn't work so I suspected a memory issue The D has a slot underneath the keyboard for memory as well as underneath the laptop When ever I put memory in the slot under the keyboard it won t startup I tried various memory known to work I even took the memory from underneath the laptop and placed it under the keyboard because it worked underneath But once I placed the memory in the slots under the keyboard it would not startup I would just get three green lights next to the power key Dell Latitude D520 memory slot doesn't work One stayed the other blinked they all eventually stopped entirely Once I removed the memory it would start up I Dell Latitude D520 memory slot doesn't work tried cleaning the memory slot with an air can I ve never encountered this before For now I just run with gig memory stick underneath the laptop It works fine I am assuming a motherboard issue Any suggestion greatly appreciated nbsp
Sure sounds like the socket is bad, or the memory controller. You may have to live with a single DIMM in the bottom slot.
So in February I ordered my kid an inspiron as first computer Later slot, card 11- per supposed have memory tag it it doesnt service is to inspiron but I decided to upgrade inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt the memory and I called Dell and provided my service Tag Dell told me it had a GB memory card and I could upgrade to a GB card I ordered the card and disassembled my computer to find there is no slot to upgrade After an hour on the phone inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt I find out inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt that what I am looking at is one with a fixed memory module I told them that per my service tag it is supposed to have a slot and be upgradeable They told me there is nothing they can do So I say how bout you exchange this for one that has what I ordered They say since its over the days there is no way to return or exchange I said even though its your fault Am I being unreasonable All I want is what I ordered After a few more calls to India One person finally tells me there is a first and second generation of this laptop Ist gen has the fixed and the second has the replaceable So I tell them that per nbsp Dell tag nbsp this is supposed to be nd generation and therefor it was built wrong They again say quot we have a day no Hassel return quot and your over that Any suggestions folks I m sick of beating my head against the wall with these peoplehttp://en.community.dell.com/support-forums/laptop/f/3518/t/19992563
I recently upgraded my processor amp motherboard from AMD Phenom II X Asus M N T-M Now it s AMD FX- amp Asus M A L-M LX I ran two modules of RAM GB GB on that previous motherboard These are my modules Corsair CMZ GX M A C Vengeance GB Single Module DDR Memory Kingston Value RAM GB don t know the exact model but it was a Mhz always 2nd DIMM Solved: on Memory slot on is hardware new reserved motherboard module Both modules have the same latency I just had to downclock the corsair module to Mhz amp then they both ran in dual channel mode Now on this new motherboard when I check sys info in BIOS it shows just GB RAM or GB basically it Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard just detects what s in the first slot When Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard I boot into Windows it says that GB or GB the other slot is always hardware reserved Also task manager shows wrong RAM speed Instead of Mhz it shows Mhz And when I really run it at Mhz or even below Mhz it s always wrong in task manager There s another interesting thing happening when I try to change the memory speed in BIOS When I change it amp as soon as I hit enter after F system just powers down for a few seconds amp boots right up This is just my second motherboard amp idk if it s normal but it sure doesn t feel right I m posting this after going through a lot of posts on similar topics amp the solutions are not working for me I even checked for bent pins on my CPU but it looks good As it looks either the RAM modules are incompatible on this motherboard but then why is the speed in task manager always wrong or something is wrong with the motherboard This is what I think but I need your help to make it work I m mentally exhausted now nbsp
I was wondering as I've got spare slot Mini PCI-Express free on my laptop if such Intel Card ITM could fit inside This technology is quite not expensive actually The mini PCI-E Memory slot on Intel? PCI-Express Mini Turbo Card is very ease to access under Intel? Turbo Memory Card on Mini PCI-Express slot my keyboard and it just have to be inserted and at system reboot Intel? Turbo Memory Card on Mini PCI-Express slot Windows will recognize straight that card and the proper Intel Turbo drivers It does act like quot Windows ReadyBoost quot amp quot Windows ReadyDrive quot under and Vista so the system will load faster boost the disk cache load faster Apps amp perform battery improvement Work on quot Mobile Intel Express Chipset familly quot amp quot Mobile Intel Express Chip Familly quot - gb RD RB no software pinning - gb RD RB no software pinning - gb RD no RB software pinning Any experience in return or it is just like inserting a SD Card in the Card Reader to Ready Boost See also this Post http www sevenforums com general-d robson-pe html EDIT Looks some of you threads seems telling not bothering about gimmick stuff for geek guy That's just annoy me having spare mini Pci-e slot as i won't install an expensive G card I don't need it either
Quote: Originally Posted by NoN
I was wondering as I've got 2 spare slot Mini PCI-Express free on my laptop, if such Intel Card (ITM) could fit inside...This technology is quite not expensive actually.
The mini PCI-E is very ease to access under my keyboard and it just have to be inserted, and at system reboot, Windows7 will recognize straight that card and the proper Intel Turbo drivers.
It does act like "Windows ReadyBoost" & "Windows ReadyDrive" under 7 and Vista...so the system will load faster....boost the disk cache, load faster Apps & perform battery improvement.
Work on "Mobile Intel 965 Express Chipset familly" & "Mobile Intel 4 Express Chip Familly".
-1 gb (RD, RB, no software pinning),
-2gb (RD, RB, no software pinning),
-4gb (RD, no RB, software pinning).
Any experience in return? or it is just like inserting a SD Card in the Card Reader to Ready Boost?
See also this Post:
Looks some of you (threads) seems telling not bothering about...gimmick stuff for geek guy!?!
That's just annoy me having spare mini Pci-e slot, as i won't install an expensive 3G card (I don't need it either!)
With 4 gigs of ram any sort of boost program isnt going to help much since it wont often be used.
--------------- Display Devices --------------- Card name NVIDIA GeForce M GT Manufacturer NVIDIA Chip type GeForce M GT DAC type Integrated RAMDAC Device Key Enum PCI VEN DE amp DEV amp SUBSYS amp REV A Display Memory Memory,Dedicated consistant Memory,Shared not Display Memory MB Dedicated Memory MB Shared Memory MB Current Mode x bit Hz ------------------ System Information ------------------ Time of this report Machine name NICK-PC Operating System Windows Vista Ultimate Build Service Pack longhorn rtm - Language English Regional Setting English System Manufacturer ASUSTeK Computer Inc System Model G S BIOS Default System BIOS Processor Intel R Core TM Duo CPU T GHz CPUs GHz Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found DxDiag Version bit Unicode A person in my thread here http forums worldofwarcraft com thread html topicId amp postId amp sid said That doesn t look right my GTS displays Memory MB Dedicated Memory MB Shared Memory MB Could you have bad videocard memory Or maybe reinstal direct X Click to expand So I m not sure where to start and I Display Memory,Dedicated Memory,Shared Memory not consistant m hoping someone here can point me into the right direction as to what it is I need to do to fix this problem I ve been having with graphical Discrpencies in World of Warcraft I haven t notice any in Call of Duty nbsp
Okay I did something really stupid It was late I was Memory on laptop A215-S7416 MicroSD the Express stuck Satellite slot Card Card my in in the dark and I wasn t paying attention obviously so here s what happened I had a SanDisk GB Micro SD Memory Card that I was using in my cell phone I wanted to transfer some pics amp photos from my computer to the phone so I decided to stick it in the Express Card slot of my laptop Simple enough right Well being the incredibly smart person that I am I put the micro memory card in the adapter but it was the wrong one So my computer pretty much swallowed it whole I can t MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop get it back out Now I can t use the Express Card slot in my computer AT ALL because the old one MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop is still stuck in there You can t really see it but if you try to put another adapter in there it won t quot click quot It won t go all the way because the old one I lost is still in there waiting to be rescued haha So my question is How do I get the memory card out of my computer I tried taking it apart but I couldn t get the part of where the express card slot is so that was no good There s a way to do this I know I m just not smart enough to figure it out on my own Which is probably a good thing because I might mess it up again lol I have a Toshiba Satellite A -S laptop Any help is appreciated Thanks -Ashley nbsp
just received my new stream 11. have barely unpacked it yet! quesition: I know that there's a slot for a memory card - I almost never use a camera, so I'm not totally familiar with that technology. Can anyone tell me what kind of card goes with that slot? What's the maximum capacity? thanks! w
Yes, that will work. -weshttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/which-card-should-I-buy-for-the-memory-card-slot-on-HP/td-p/4834450
I have been getting this quot svchost exe - application error the instruction at quot x c quot referenced memory - svchost.exe at referenced instruction "0x00000000". memory error The at "0x7c923845" c... memory the application at quot x quot The memory could not be quot read quot quot quot error for a week now and it disables my system My browser firefox will becomes very unstable and takes me to vague websites when clicked on the google search links My system then pops the SVChost messages and when clicked to send those message to microsoft it will disable my system DDS Ver - - - NTFSx Run by krish at on Sat Internet Explorer BrowserJavaVersion Microsoft Windows XP Professional GMT - AV Lavasoft Ad-Watch Live Anti-Virus Enabled Updated A C F E - FDE- -AFAE- EFC EDE AV VirusScan Enterprise AntiSpyware Enterprise Disabled Updated A B B- C - -A svchost.exe - application error the instruction at "0x7c923845" referenced memory at "0x00000000". The memory c... AB-E DEABF F Running Processes C WINDOWS system svchost -k DcomLaunch svchost exe C WINDOWS System svchost exe -k netsvcs svchost exe C WINDOWS System svchost exe -k eapsvcs svchost exe C WINDOWS System svchost exe -k dot svc C Program Files Lavasoft Ad-Aware AAWService exe C WINDOWS Explorer EXE C WINDOWS system spoolsv exe C WINDOWS system igfxtray exe C WINDOWS system igfxpers exe C WINDOWS RTHDCPL EXE C Program Files McAfee Common Framework udaterui exe C Program Files Google Google Talk googletalk exe C Program Files iTunes iTunesHelper exe C WINDOWS system igfxsrvc exe C Program Files Common Files Apple Mobile Device Support AppleMobileDeviceService exe C Program Files Bonjour mDNSResponder exe C Program Files McAfee Common Framework McTray exe C PROGRAM FILES CARNIVAL VPN cvpnd exe C WINDOWS system enstart exe C Program Files Java jre bin jqs exe C Program Files Mozilla Firefox firefox exe C Program Files Rational ClearCase bin lockmgr exe C Program Files McAfee VirusScan Enterprise engineserver exe C Program Files McAfee Common Framework FrameworkService exe C Program Files McAfee VirusScan Enterprise VsTskMgr exe C Program Files Common Files Microsoft Shared VS DEBUG mdm exe C WINDOWS system mfevtps exe c Program Files Microsoft SQL Server Shared sqlwriter exe C WINDOWS system svchost exe -k imgsvc C WINDOWS system cccredmgr exe C Program Files Lavasoft Ad-Aware Ad-AwareAdmin exe C WINDOWS system CCM CcmExec exe C Program Files McAfee VirusScan Enterprise Mcshield exe C WINDOWS system wuauclt exe C Documents and Settings krish Desktop dds scr C Program Files iPod bin iPodService exe C WINDOWS system msiexec exe C Program Files Lavasoft Ad-Aware AAWTray exe Pseudo HJT Report uStart Page hxxp www att net uSearch Page hxxp us rd yahoo com customize ycomp defaults sp http www yahoo com uSearch Bar hxxp us rd yahoo com customize ycomp defaults sb http www yahoo com search ie html mStart Page hxxp www att net uInternet Connection Wizard ShellNext hxxp intranet uInternet Settings ProxyOverride local uSearchURL Default hxxp us rd yahoo com customize ycomp defaults su http www yahoo com mWinlogon Userinit userinit exe BHO Adobe PDF Link Helper df c-e ad- -a -fa c ebdc - c program files common files adobe acrobat activex AcroIEHelperShim dll BHO Java Plug-In SSV Helper dbc -a - b-bc - c c c a - c program files java jre bin jp ssv dll BHO JQSIEStartDetectorImpl Class e e f - ce- c -bc -eabfe f c - c program files java jre lib deploy jqs ie jqs plugin dll mRun HKCUSettings c sourch ql qlinstall exe mRun IgfxTray c windows system igfxtray exe mRun HotKeysCmds c windows system hkcmd exe mRun Persistence c windows system igfxpers exe mRun RTHDCPL RTHDCPL EXE mRun Adobe Reader Speed Launcher quot c program files adobe reader reader Reader sl exe quot mRun Adobe ARM quot c program files common files adobe arm AdobeARM exe quot mRun McAfeeUpdaterUI quot c program files mcafee common framework udaterui exe quot StartedFromRunKey mRun ShStatEXE quot c pr... Read more
Hello and welcome to the forums!My secret agent name on the forums is SweetTech (you can call me ST for short), it's a pleasure to meet you. I am very sorry for the delay in responding, but as you can see we are at the moment being flooded with logs which, when paired with the never-ending shortage of helpers, resulted in the delayed responding to your thread.I would be glad to take a look at your log and help you with solving any malware problems.If you have since resolved the issues you were originally experiencing, or have received help elsewhere, please inform me so that this topic can be closed. If you have not, please adhere to the guidelines below and then follow instructions as outlined further below:Logs from malware removal programs (OTL is one of them) can take some time to analyze. I need you to be patient while I analyze any logs you post. Please remember, I am a volunteer, and I do have a life outside of these forums.
Please make sure to carefully read any instruction that I give you. Attention to detail is important! Since I cannot see or directly interact with your computer I am dependent on you to "be my eyes" and provide as much information as you can regarding the current state of your computer.
If you're not sure, or if something unexpected happens, do NOT continue! Stop and ask!
In Windows Vista and Windows 7, all tools need to be started by right clicking and selecting Run as Administrator!
If I instruct you to download a specific tool in which you already have, please delete the copy that you have and re-download the tool. The reason I ask you to do this is because these tools are updated fairly regularly.
Do not do things I do not ask for, such as running a spyware scan on your computer. The one thing that you should always do, is to make sure sure that your anti-virus definitions are up-to-date!
Please do not use the Attachment feature for any log file. Do a Copy/Paste of the entire contents of the log file and submit it inside your post.
I am going to stick with you until ALL malware is gone from your system. I would appreciate it if you would do the same. From this point, we're in this together ;)
Because of this, you must reply within three days failure to reply will result in the topic being closed!
Please do not PM me directly for help. If you have any questions, post them in this topic.
Lastly, I am no magician. I will try very hard to fix your issues, but no promises can be made. Also be aware that some infections are so severe that you might need to resort to reformatting and reinstalling your operating system.
Don't worry, this only happens in severe cases, but it sadly does happen. Be prepared to back up your data. Have means of backing up your data available.____________________________________________________ One or more of the identified infections is a backdoor trojan and password stealer.This type of infection allows hackers to access and remotely control your computer, log keystrokes, steal critical system information, and download and execute files without your knowledge.If you do any banking or other financial transactions on the PC or if it contains any other sensitive information, then from a clean computer, change all passwords where applicable.It would also be wise to contact those same financial institutions to appraise them of your situation.I highly suggest you take a look at the two links provided below:1. How Do I Handle Possible Identify Theft, Internet Fraud, and CC Fraud?2. When should I re-format? How should I reinstall?We can still clean this machine but I can't guarantee that it will be 100% secure afterwards. Let me know what you decide to do. If you decide to go through with the cleanup, please proceed with the following steps.NEXT:Running TDSSKillerPlease read carefully and follow these steps. Download TDSSKiller and save it to yo... Read more
Hi , just wondering , I have a 4GB laptop (dell inspiron n5010) with i3 350 processor and 500 GB HD ... lately I wanted to play the most recent GTA and what happened ? well the game booted but barely have i gone out of the first corner the whole background disappeared ... I went to my graphics settings and it says Generic PnP Monitor and Intel(R) HD Graphics
-Chip type Intel HD
-Dac type Internal
-Bios info : Intel Video BIOS
-Total Available graphics memory 1696 MB
-Dedicated Video Memory 64MB
-System Video memory 0MB
-shared system memory 1632MB
Is there any way to increase the Video memory on my laptop ?
I will add to it that in the Bios itself there are no options available for me to even lower it they are all kind of @locked@
I have been trying everything even updates from intel etc but not helping...
All you can do is max out your system memory, if it isn't maxed already. There might be an option in the laptops bios to increase the shared video memory
Hi Everyone from Bleepingcomputer.com,
I am facing some issues with my laptop.
I always noticed my CPU, Memory, Physical Memory usage are running quite high.
Wonder is it normal for my computer?
I always feel the temperature is quite high and my fan keep running fast all the time even with just running some lite program. Sometimes my computer also turned to Blue Screen.
Please find the attachments to see my Task Manager.
Please download MiniToolBox , save it to your desktop and run it.
Checkmark the following checkboxes: List last 10 Event Viewer log List Installed Programs List Users, Partitions and Memory size.
Click Go and paste the content into your next post.
Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
Hello, I'm running a 64 bit Windows 10 laptop. On idle, the System process is showing a high memory usage of more than 150 MB, usually more than 200 MB. Using poolmon the pooltag SpDN showed up with a memory leak. It leads to the Intel Matrix Storage Manager driver, iaStorV.sys. How should I go about fixing the problem?
Since this is a Intel driver I doubt the WDK can fix it.
You may try to see if there's a more current version of Intel's RST available for download and see if that fixes the leakage issue.
I know the question is awkward. So hopefully, I can explain it.
Say that I have a 500 GB external hard drive. But as it turns out, there's only 465 GB according to it and my computer. Why isn't there 500 Gb, but rather only 465? This also applies to mp3 players like iPods.
Why is this?
Can I do something to get back the "hidden" memory?
I have just bought some new memory, 2 x 1 gig, inserted it and ran the test. I get one error in the Stride38 test. Address expected is different to the one returned.
I know which chip it is, should I send it back, or is this 1 error acceptable for the system?
Thanks for your response
please read the sticky about upgrading memory.
My windows xp 64 bit runs super slow after windows loading sign and it takes me 2 hrs to open up the desktop and transfer 6 images. I use 2 RAM's of 2gb (kingston DDR2). When I opened up BIOS, it showed 640k as base memory and 126m as extended memory.
There are no details under the computer title if I try to check the properties of computer or maybe it is just taking too much time to display. the desktop is fine, my computer still works but takes hours to do a simple task. it all started all of a sudden. Also I would like to know if 'unganged mode' is fine as it is displayed when the system boots. I tried to check another different RAM on the computer, but still no change, so I am confused regarding the problem.