Windows Support Forum

Mother Board Replacement Help

Q: Mother Board Replacement Help

Hey guys
i have a compaq presario SR1610NX Recently i shorted out my mother board while doing a proccessor trade out (trust me the proccessor is compatable as the computer did run for a while after the switch). anyway i called up compaq and they say that my mother board was discontinued and they tried to sell me a whole new tower. i need a compatible replacement. im using a AMD Athlon 64 3700 proccessor.
Please Help Me- Dr. Feelgood

Relevancy 100%
Preferred Solution: Mother Board Replacement Help

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 30.53%

Hi techspotters it has come time to modify my old rig I m planning to upgrade the cpu without changing my motherboard but there is a slight risk involved that the purchase I am going to make is with CPU board AM3+ AM3 faul So back to basics My current MB M A TD PRO AM3 board with AM3+ CPU USB - link Current CPU Phenom t oc running ghz Current RAM EVOleggera x running underclocked mhz the one to upgrade to AMD FX -- So this is a basic operation a cpu swap but few questions popped up on the research phase M A TD is a AM board which apparently after some searching supports some of the FX series cpus that are AM I have also found the corresponding BIOS that I need to flash myself to to make it work properly and be recognized by the MB link Q amp A FX is known to support mhz RAM speeds my existing RAM runs max at without overclock and is placed x which occupies all slots and might confuse the FX which supports dualchannel as usual Meaning I will need to leave my RAM running at mhz how big will the reduce be in the performance of the CPU- mhz vs When setting up the proceccor I will need to disable the Turbocore to make it stable on the older AM board which only supports cpu speeds up to ghz and the fx on turbo bumps to ghz After disabling turbo all cores are set to run at which by research is the most stable option on my existing MB Will FX bottleneck gtx or gtx and how bad it is going to be Upgrading hardware is always nice but am I making bold move by upgrading a year old cpu to almost as old one And if someone with more knowledge can state me that there is no performance gain to be maid I just might stick with my old as long as its still breathing and calculating Thanks in advance for replys And no changing an motherboard is not an option So fond of my old rig best regards m nbsp

http://www.techspot.com/community/topics/am3-board-with-am3-cpu.214400/
Relevancy 29.24%

Evening, all

I bought an interesting little Single Board Computer as an mITX motherboard (a WADE-8020, more info at the link below):

http://www.ebay.co.uk/itm/Portwell-...766?pt=LH_DefaultDomain_0&hash=item3a9b75151e

I have another similar board in an old Hoojum Cubit 3 case, and was wondering if anyone might have any other suggestions for a similarly eye-catching case, probably ready-made, though I'm not averse to either buying a DIYed case, or maybe trying to make one myself (I have a Dremel but not much else, and that includes skill )

Cheers, Jon.
 

http://www.techspot.com/community/topics/case-suggestions-for-industrial-mitx-board.213745/
Relevancy 27.52%

Hi, am prepared to be labelled "thick as mince" however I wonder if anyone can advise how to proceed with the following: Replaced cracked laptop screen on a TM99, on first start up after replacement, the screen worked.....woohoo!, however.....on next startup, there was nothing, no lights, no start up screen...nada. Replaced new with original screen, which although cracked had worked, and it too now failed. Any ideas? The cable for the screen was seated properly and securely, nothing else was moved so am struggling to establish a reason for this non conformance. Could it possibly be a jammed "lid closed" switch? If this is potentially the culprit, anyone know whereabouts it is? Thanks
 

http://www.techspot.com/community/topics/packard-bell-tm99-laptop-failed-screen-replacement.208913/
Relevancy 29.67%

Hey all,

On my studio pc, I've installed a new rack mounted firewire audio interface in the studio. On the other drives (windows 8.1) the interface has installed perfectly but on the xp drive, although the drivers etc have been installed, once set, it works perfectly with the new outboard soundcard.

However, whenever I reboot to the xp drive, xp always reverts back to the on-board realtek sound card. I set the default to the new interface (a Presonus Firestudio Project) but every reboot it defaults to the realtek.

The motherboard is a P5N-E SLI if that helps.

How can I stop this happening so the new interface is the default?

Thanks in advance,

Paul
 

http://www.techspot.com/community/topics/xp-reverts-to-on-board-sound.208179/
Relevancy 28.38%

Hi guys,

I am replacing the stock fan/heatsink on my HIS Radeon HD 6790 with the Arctic Accellero R2 Plus. This fan has a 3 pin and 4 pin option for the fan. The stock fan is only 2 pin...black and red. The aftermarket fan's wiring is black, red and yellow, and black (ground), red (VDC), yellow (signal) and blue (PWM).

My question is can I just splice the original connector with just red and black into the aftermarket wiring? The fan came with a molex adapter but I'd rather the video card be able to regulate the fan rather than it just be going full out all the time. Is the factory red and black also considered VDC and ground?

Thanks in advance!
More about : 6790 fan pinout aftermarket fan replacement

"There is only one way to boot a computer..."
 

A:HIS HD 6790 Fan Pinout (Aftermarket Fan Replacement)

Chris, if the fan will plug into the motherboard, it will regulate the speed and u will be alright.
 

http://www.techspot.com/community/topics/his-hd-6790-fan-pinout-aftermarket-fan-replacement.206709/
Relevancy 28.38%

Hey!! So basically I need a new one and I have decided over what to buy and did some research but I want to check in with you guys just to be sure that the gpu and psu are compatible. This is what I want: GTX 760 2gb Physx CUDA; and my current psu is: Silver Power SP-S650. Never had a gpu that needed two 6-pin PCI Express supplementary power connectors before so I want to be super sure that I got it right )
 

A:Graphic card replacement

Silver Power SP-S650 650W PSU
ATX 12V V2.3, 80 Plus Bronze, Standard, 4x 6+2pin PCIe, 14x SATA, 7x MolexClick to expand...

By the link in the quote you have a PSU with 4x 6+2pin PCIe connectors, and 650W is plenty for two GTX 760 in SLI.
 

http://www.techspot.com/community/topics/graphic-card-replacement.206486/
Relevancy 28.81%

My gaming computer turned in February and now that it s no longer under warranty things are going wrong This week in the middle of a project the machine rebooted on its own It restarted but shortly after did replacement PSU question it again and again I still have free tech support and two tech s offered help on what could be causing it First I replaced the cooling system thinking the PSU replacement question one installed failed and the cpu was overheating doing it It still rebooted I purchased software called Hardware Monitor to see if the power supply voltage was bad but it seemed ok then I swapped out the memory in case there was a bad stick It still rebooted My support tech feels it still could be the power supply and suggested I replace it I was told that I would need to buy the exact model and that buying any other would require a complete rebuild of my PC Since the computer is years old the power supply isn t sold anymore I was wondering if it s true that my computer would need to be completely rebuilt if I bought a PSU that wasn t the same The power supply is a Enermax Galaxy EVO w model egx ewt My computer was made by Digital Storm More system details available if needed nbsp

A:PSU replacement question

1. What hardware do you have in your system that needs such power? We need your hardware specs: CPU, GPU, amount of RAM, drives, etc.
2. Why does he believe a complete rebuild is necessary because that particular psu isn't made anymore? Is it a special size? If your case is to standard specs then see point #3.
3. Who is this support tech? Does he work for Digital Storm by chance? Check these psu's that will more than meet your power needs: http://www.newegg.com/Product/Produ...07657 600479299&IsNodeId=1&name=1200W - 1499W
4. Before you spend any $ find someone who has a digital volttage meter and test your psu to see if that is really the cause.
 

http://www.techspot.com/community/topics/psu-replacement-question.205941/
Relevancy 28.38%

So heres the story The computer has been working fine for several years Last night I decide to D850MV/D850EMV2 long Three desktop board beeps on Intel plug in my tv to the desktop via dvi It Three long beeps on Intel desktop board D850MV/D850EMV2 works fine and I dont have any problems I get home today and try and turn the computer Three long beeps on Intel desktop board D850MV/D850EMV2 on and I dont get any video signal to either the tv or the normal monitor Also long beeps accompany start up it sounds as though things boot but I dont get video or sound but it sounds like the hard drives click now and then like normal and the fans all run fine Ive swapped the first ram stick with one other and havent tried the rest yet and I have not changed the video card yet but plan to in the next minutes as of writing this Nothing looks physically damaged and I dont have any extra ram for this computer laying about since its a rambus so all I can do is swap the ram thats in it around and because I cant get video I cant run a test on the ram Suggestions or help would be appreciated Specifically what the long beep codes mean ive Three long beeps on Intel desktop board D850MV/D850EMV2 found a couple different versions of the code online and not sure which is correct Also what might have caused the problem plugging the tv in thats the only thing I did different unless someone was messing around with it without my knowledge or could it just be from years of wear or what nbsp

A:Three long beeps on Intel desktop board D850MV/D850EMV2

I think three beeps on Intel is a memory issue. At least that what it was when I had a stick of cheap RAM crap out on me.

I'd run Memtest and go from there

RAM can fail from a number of causes. Heat exposure, flaky transistor junctions, who knows. I seriously doubt plugging the TV in had anything to do with it.
You could go into BIOS to ascertain if the RAM voltage is set correctly. Over-volting is a DIMM killer.

You should be able to get documentation for that board directly off Intel's web site. Intel used to give BIOS beep codes ion the board/chipset manuals.

They also have hardware monitor software as a free download. Look up "Intel Desktop Utilities Lite".
 

http://www.techspot.com/community/topics/three-long-beeps-on-intel-desktop-board-d850mv-d850emv2.191367/
Relevancy 27.95%

I have a Dell Latitude D that I dropped while in its carrying bag so even backlight Dell screen Latitude replacement no after it wasn t a real hard landing Now the backlight won t come on I swapped an entire screen assembly from an identical D and it still won t turn the backlight on I swapped the screens again and the borrowed D still works fine and mine won Dell Latitude no backlight even after screen replacement t work I didn t bother to test my screen in the borrowed D I can run an external CRT with mine and I can see the LCD display if I shine a light on it so I know the display is working and not cracked The laptop won t drive the CRT Dell Latitude no backlight even after screen replacement unless it thinks the lid is down so to use the keyboard I removed the sense magnet from the lid and taped it to the place where it would be with the lid closed I ve noticed in the past that this D often stayed fully on including the display it seemed when I closed the lid and walked away for hours Note When I tested the borrowed screen I had the sense magnet removed When the magnet is taped in place simulating lid down both the backlight and the display are off I can t see the display even when a light is shined on it but when the magnet is removed simulating lid up I get the display with no backlight It seems like the display knows whether the lid is up or down but the backlight seems to act like the lid is always down Is this possible What should I look for nbsp

A:Dell Latitude no backlight even after screen replacement

Did you replace the backlight inverter?
 

http://www.techspot.com/community/topics/dell-latitude-no-backlight-even-after-screen-replacement.198916/
Relevancy 63.64%

This is my Entire system spec Im looking to upgrade my processor but I need help Operating System System Model Windows Home Premium x Service Pack build Install Language English United States System Locale English United States Installed AM Boot Mode BIOS Secure Boot not supported eMachines ET G System Serial Number PTNBA Enclosure Type Desktop Processor a Main Circuit Board b gigahertz AMD Athlon II X u kilobyte primary memory cache kilobyte secondary memory cache -bit ready Multi-core total Not hyper-threaded Board eMachines MCP PM-GM Bus Clock megahertz BIOS AMI P -A Drives Memory Modules c d Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space HL-DT-ST DVDRAM GH N SCSI im with AMD is board? to my What Processor mother compatible this And new CdRom Device Optical drive WD Virtual CD USB Device Optical drive Generic- Compact Flash USB Device Hard drive -- drive Generic- MS MS-Pro HG USB Device Hard drive -- drive What AMD Processor is compatible with my mother board? And im new to this Generic- SD MMC USB Device Hard drive -- drive Generic- SD MMC MS What AMD Processor is compatible with my mother board? And im new to this MSPRO USB Device Hard drive -- drive Generic- SM xD-Picture USB Device Hard drive -- drive WD My Book USB Device Hard drive GB -- drive s n WMAVY WDC WD AAKX- CA SCSI Disk Device GB -- drive s n WD-WMAYUL SMART Status Healthy Megabytes Usable Installed Memory Slot DIMM has MB serial number DE B Slot DIMM has MB serial number D B Slot DIMM is Empty Slot DIMM is Empty Local Drive Volumes c NTFS on drive GB GB free k FAT on drive GB GB free Operating System is installed on c Network Drives None discovered Users mouse over user name for details Printers local user accountslast logon Quentin PM admin UpdatusUser AM local system accounts Administrator AM admin Guest PM HomeGroupUser never Marks a disabled account Marks a locked account HP LaserJet Professional P w on IP Microsoft Shared Fax Driver on SHRFAX Microsoft XPS Document Writer on XPSPort Controllers Display ATA Channel Controller ATA Channel Controller NVIDIA nForce Serial ATA Controller x Standard Dual Channel PCI IDE Controller What AMD Processor is compatible with my mother board? And im new to this NVIDIA GeForce GTS Display adapter DELL WFP Monitor quot vis s n XX- JU -XXXXX- - S June Bus Adapters Multimedia Standard Enhanced PCI to USB Host Controller Standard OpenHCD USB Host Controller HP Webcam HD- Mobiola Wave Audio Device WDM Mobiola Web Camera Video Source NVIDIA Virtual Audio Device Wave Extensible WDM Realtek High Definition Audio Senstic PocketAudio Senstic PocketCam USB Audio Device Virus Protection Back to Top Group Policies No details available None discovered Communications Other Devices Hamachi Network Interface primary Auto IP Address Gateway Dhcp Server Physical Address A D Connection Speed Mbps Microsoft to Adapter Microsoft ISATAP Adapter NVIDIA nForce Mbps Ethernet Auto IP Address Gateway Dhcp Server Physical Address FC C AA Connection Speed Mbps Teredo Tunneling Pseudo-Interface Networking Dns Servers HID-compliant consumer control device x HID-compliant device x USB Input Device x HP Webcam HD- HID Keyboard Device x HID-compliant mouse Microsoft PS Mouse USB Composite Device x USB Mass Storage Device x USB Root Hub x Generic volume shadow copy WD SES Device E F G H I nbsp

A:What AMD Processor is compatible with my mother board? And im new to this

That is an AM3 socket CPU which means it should be compatible with the Phenom II series CPU's. I looked up the board and it should still support up to a 95 watt CPU so any Phenom II X4 CPU with a 95 watt TDP would work on it.

Like This
http://www.amazon.com/AMD-Phenom-Socket-Quad-Core-Processor/dp/B002XNBQJQ
 

http://www.techspot.com/community/topics/what-amd-processor-is-compatible-with-my-mother-board-and-im-new-to-this.202437/
Relevancy 29.67%

Hello,
As the topic says, my computer doesn't detect my on-board sound card. It all started when I tried to install new audio drivers from manufacturers page, but the next day when I booted PC up there were no sound. In Device Manager, under Sounds, game,.. controllers tab sit 4-5 High Definition Audio Devices. Here's pic:


Then tried re-installing original audio drivers from motherboard CD, enabling/disabling On-Board HD Audio in BIOS but still no luck.

My Audio Device is VIA VT1705.
DxDiag shows that no sound card was found.

This is what is shown in Playback Devices tab:

But I have no HDMI kind audio devices..

How to make my system recognize my sound card?
 

http://www.techspot.com/community/topics/on-board-sound-card-is-not-recognized.202272/
Relevancy 29.67%

After my brother sprayed it with glass cleaner.my laptop key board types wrong letters.lets say I want to write "my laptop key board is messed up" this is what it types: my lap0to9p0 ke3ybo9ar4d i8s me3sse3d u7p0. all the letters in the upper row type the letter and the number above it and vise verse(exept t,y,5,6)
I tried the num lock and sticky keys,checked my language tap still nothing
(I use dell inspirion , windows 7)
Plz help.
thanks
 

A:My laptop key board is messed up

Have you tried a USB keyboard? If not, try it. You might also try the on screen keyboard.
 

http://www.techspot.com/community/topics/my-laptop-key-board-is-messed-up.196547/
Relevancy 28.38%

I have a board that has dual AMD Athlon 64 FX-74s, the fans are incredidbly loud and I searched online but all I found were pretty much the exact same ones that I already have. I don't want to replace the current fans with identical ones that I will probably have the same problem with... So I was wondering if anyone knew of some compatible replacements for these... I would like ones that will give good air flow for the price seeing how I will need 2 of them....

Thanks
 

A:Looking for replacement heatsink/fans for my CPUs

No modern CPU coolers support the socket F from AMD. You may have to find older models.
 

http://www.techspot.com/community/topics/looking-for-replacement-heatsink-fans-for-my-cpus.195772/
Relevancy 27.95%

Hi Laptop screen is badly cracked needs replacement Original laptop is a Compaq Presario CQ with a CCFl screen n b -l rev c This is with a pin connection and the pink white backlight cable I already have an LED Screen from a dead laptop LP WH TL N This is with a pin connection and no other external cables As it stands right now I have the cable going from inside the laptop proper splitting in one fork going screen cracked, unsure about replacement Laptop into the left side of the inverter and the Laptop screen cracked, unsure about replacement other turning into a flat cable and going into the screen as a pin connection There is also the pink white backlight cable going into the right side of the inverter I m wondering there is any way to use the LED screen using a pin to pin converter Laptop screen cracked, unsure about replacement or possibly to purchase a pin cable outright and ignoring the inverter competely or something along those lines I simply haven t been able to figure out to what level the laptop is built around using that specific screen Thanks in advance nbsp

http://www.techspot.com/community/topics/laptop-screen-cracked-unsure-about-replacement.194633/
Relevancy 29.67%

I just came from a retail store to check on prices but most of their parts weren't available anymore. Instead of a G. Skill Ripjaws 2x4 8gb DDR-3 1600, the clerk offered me a Crucial Ballistix 2x4 8gb DDR-3 1866 memory. The board I'm gonna buy is an Asrock H77 Pro4/Mvp but looking at their memory support list http://www.asrock.com/mb/memory.asp?Model=H77 Pro4/MVP, it doesn't seem compatible.

The clerk had told me it was compatible and that he had tried it before but I'm not sure if it'd have unwanted effects over some period of time. (I got drawn in by how the memory looks and its LED so I'm including it as a choice). Thanks.
 

A:Is a 1866 memory compatible with an H77 board?

It will be compatible, worst case scenario is just setting your 1866Mhz RAM to run at 1600Mhz. You're getting quicker RAM for free.
 

http://www.techspot.com/community/topics/is-a-1866-memory-compatible-with-an-h77-board.194307/
Relevancy 28.81%

Hello everyone Ok I haven t posted in a while Replacement failing PSU's keeps as I Replacement PSU's keeps failing have bought a Replacement PSU's keeps failing new PC This actually concerns my old pc that I gave to my friend The thing is I have recently found out that the pc has had Power Supplies that have failed in about a year s time Each of these Power Supplies wasn t a cheap model They were collectively well known brands I have asked my friend to tell me what is the current model and wattage of the current PSU My question is what could cause a repeated failure of decent Power Supplies My friend isn t much of a techie and he surmised that it maybe is the Motherboard This Desktop PC is about years old It is an AMD Dual Core Gig RAM DDR The Motherboard is a Gigabyte KA- N SLI and it has currently an ATI video Card I think it s a HD Anyway I originally had a W power supply which couldn t handle the strains of the new video card and the computer s PSU failed As I was working full time in a very stressful job Replacement PSU's keeps failing I did not have the means to buy a new PSU and install it myself as I would have normally The end result was we took it to the shops and spent odd dollars AU dollars for the Power Supply itself for a Watt Power Supply and within to months that power supply failed Currently the PC works intermittently It sometimes turns on and works fine and recently the last days it does not even turn on I just don t understand how a good brand PSU can fail so quickly My friend thinks it might be the Case Fans as the case I had it in had was a gaming case with big mm fan in the front of the Case and two mm fans to the side He seems to think maybe it is the fans chewing up power but I tend to think not as I ran several peripherals when I had that PC and I was a power user compared to my friend who basically only occassionally uses it and he generally only uses it for old games like Neverwinter NIghts I can t seem to get my head around a possible solution My theories are as follows Power Outlet faulty I thought maybe there was a overload at the power socket where the PC is plugged in or possibly the whole house as he said he thought of that and has moved the plug in for the PC around Motherboard If it was the motherboard would it not make those beeping sounds at start From what I have gathered talking to my friend it appears that since the PC hasn t started it has been making distinctive beeps indicating a hardware fault My PC noob friend has stated maybe it was the connection between the MB and the PSU but I thought that was preposterous as the connection wires would be coming from the PSU and not the MB so the chances that PSU cables to PC are faulty just sounds impossible Memory I have not seen the PC myself and only spoke to him on the phone but I will be going over to his house on the weekend to have a look and if need be bring the PC over to my place to take it apart and start testing each component separately to find the fault Also my friend says maybe its just wear and tear But surely that does not make sense I used to own this PC and I was a heavy gamer I played in the years - quite heavily with this pc and I had several joysticks and that was when it had a w Antec Power Supply with absolutely no issues I do know that a mutual friend apparently fixed it last time it broke down PSU He apparently replaced the PSU and gave the interior a clean with compressed air I have a sneaking suspicion he might have tweaked the voltages but again I am not sure and I will be confirming with this technician tomorrow I have instructed my friend to run a dxdiag and send the file to me so I can post it with this thread but I don t think that is gonna happen as it sounds like the PC wont load to windows Can someone please give me clues to how to go about indentifying the core problem here Am I on the right path with my analysis I just can t fathom that it could be the motherboard Is it possible for a faulty motherboard to... Read more

A:Replacement PSU's keeps failing

If the psu's are failing like that, chances are something is causing the issue (the odds of that many psu's failing that quickly is very low)

Test the Psu's on another system for starters to see if they are actually bad. That could at least let you make sure it's not something else causin the problem.

I would also try other outlets because a faulty plug can be an issue (plus use a power strip, it helps protect your machine ).

I do not think its the motherboard or the video card as if it was, they would not be functional period. It can also be heat/stress on the psu if the psu is getting to hot due to location or if there's lots if dust build up causing it to fail.
 

http://www.techspot.com/community/topics/replacement-psus-keeps-failing.193810/
Relevancy 28.38%

Hi all My computer was top of the line years ago The past few years my computer has been freezing crashing and bluescreening due to the kind of functionality I force it through namely the use of multiple programs at once internet livestream games The fan hasn t worked for over a year now it was choking I simply turned it off and often attempted to keep my system as cool as possible using a large floor fan Today it gave it s death knoll - freezing with video ram artifacts all over the screen I had been I messing around with the EVE Online character creator with internet playing music and Steam open naturally Un- and reinstallation of the drivers would not fix the artifacts it had forced non-native resolution it wouldn t go beyond x or something native is x and was happily informing me that I wasn t quot currently using a display attached to an Nvidia GPU quot despite the fact that the second I uninstalled the drivers my computer was GTX Nvidia 8800 for Geforce Replacement searching for and reinstalling them again I gave up and shut down to look at the power supply and when I turned it back on it was miraculously in it s native resolution and artifact-free but I ve abused it long enough now that it probably only has a few months left and is in desperate Replacement for Nvidia Geforce 8800 GTX need of replacement I realize it might even be artifact-ridden next time I turn it on Dell pre-built desktop years old Windows Vista Ultimate bit Intel Core Quad CPU at GHz GB RAM I think my power supply is max W but I m having trouble figuring the label out so I attached a picture in case I m sorely mistaken I m looking for something that works within my current specs approximately the same size as the Geforce GTX my case won t fit anything much bigger as far as I can tell and I can t get a new case because it barely fits height-wise where I need it to go As I said I use multiple programs and I especially game on my computer so I need something that can handle my usage On the other hand I am looking to completely replace my system within a few years with something custom from Origin so I don t want to be pouring money into this system So - something that will allow me to eke out a few more years within my other current specs without costing me a bundle Say around or Please let me know if you need more information and thanks in advance nbsp

A:Replacement for Nvidia Geforce 8800 GTX

Umm have you thought about buying a new computer, yours is rather old. The amount of work, time and money you will probably spend on it trying to fix it up until you throw it away will be quite a lot.
 

http://www.techspot.com/community/topics/replacement-for-nvidia-geforce-8800-gtx.192283/
Relevancy 28.38%

Swapped out the older ASUS motherboard when it apparently died - was also told that by a repair shop A sympathetic person donated his quot old quot ASUS P WD complete with PCU and RAM and heat sink for the cost of shipping so went to work He said he had upgraded to a more powerful setup and that this all worked when he removed it and stored it I had upgraded the power supply a few years ago to an ULTRA d watt when I added a couple Replacement up won't power motherboard drives and it always seemed to work I printed out the instruction manual for the P and not having done a lot of work on PC s for some years other than adding drives etc followed it very closely The plugs from the case were labeled so I m pretty sure I got the power amp interrupt switches case lights and fans etc all hooked up right Also the main cable to the board from the power supply and a secondary power supply cable to a socket near the CPU Also got the C drive EIDE and the additional SATA drives hooked up to the board and Replacement motherboard won't power up to the power supply and believe I have them right Maybe a question on the C drive There a set of sockets for EIDE drives incl one designated as a Primary and another Primary socket for an Replacement motherboard won't power up IDE drive If I recall my C drive is an EIDE so I should have connected to the right socket on the board Even if not shouldn t the CPU and case lights and fans power up When the big moment came to hit the switch it was an anti-climax Nothing happened The only sign of life is the green power LED on the board no CPU fan or anything No case lights or fans either I checked all the connections I mentioned and believe I have them right Being there s virtually no sign of life other than the green LED power light when I switch on the power supply could it be the power supply may have been the problem the whole time How can I test it - I have a digital meter Thanks for any ideas nbsp

A:Replacement motherboard won't power up

Short the 2 power switch pins on the motherboard with a screwdriver.
 

http://www.techspot.com/community/topics/replacement-motherboard-wont-power-up.191337/
Relevancy 28.81%

Hello, I'm pretty sure my 4850 is ready to bite the dust. I'm looking to replace it with a nvidia card around $100.00. any suggestions? I'm running win 7 64 bit, athlon64 5000,4mb ddr2 ,ssd. I do light gaming I.e. diablo series , icewind dale series , witcher series etc. thanks . mlmassie
 

A:Replacement for HD 4850

Can you give us either the make/model of your mobo, or the make model of your computer if it is a pre-built.
 

http://www.techspot.com/community/topics/replacement-for-hd-4850.190610/
Relevancy 29.67%

Hi all, I have monitor gericom 2030 and it has some power board model that I cant find on sell, so I have buy one that is almost same with it. 4 plugs for invetors are same but one connection for t-con board is diffrent and on oroginal board I have pins (5V, 5v, GND, GND, 12v, BL, N/F) and on board that I have buy has ( 12v, 12v, GND, GND, 5v, 5v, GND, N.C, ON, DIM, MS ) So any suggests wich on wich one I should connect?
 

http://www.techspot.com/community/topics/different-power-board-on-monitor.190328/
Relevancy 29.24%

I got a M5A99x Evo Re2.0, brand new board and the audio from the rear doesnt work at all when I plug the pink and green plugs. I have an HDMI connecting from my TV to my Gcard, I get audio through the TV but cant seem to get those jacks working. Ive used two different headsets to see if it might have been the headset itself. im really stumped.
 

A:New board, no sound from front or rear jacks

Have you gone into the sound menu in your control panel and set your default audio device to your headset?

If, under the "playback" tab, the HDMI output is ticked, then this is the problem.

Just click on the correct device(It should either list your headphones or say "high definition audio", or something similar) and then click "set default".

This should solve the problem.
 

http://www.techspot.com/community/topics/new-board-no-sound-from-front-or-rear-jacks.188180/
Relevancy 27.95%

Hi all I normally buy my screens from ebay but does anyone know anywhere cheap . im from london uk so pref in uk please .. thanks
 

A:Where is cheapest place to buy replacement laptop screens

What's wrong with still using EBay? I get all my screens from EBay suppliers
 

http://www.techspot.com/community/topics/where-is-cheapest-place-to-buy-replacement-laptop-screens.187553/
Relevancy 28.38%

Hi there TechSpot Long time since I last posted but I had a very specific question I m not sure I could get answered elsewhere So my lady friend has been doing all her computing on her Droid RAZR (possible V5 -- replacement GPU y/n?) Acer Aspire Laptop which is kind of sad for me - as a long time system builder and power user - to watch With Christmas coming up her parents and I were going to buy her a laptop Now I work at an electronics retailer and on Black Friday we Laptop GPU replacement -- Acer Aspire V5 (possible y/n?) started selling the Acer Aspire Laptop GPU replacement -- Acer Aspire V5 (possible y/n?) V for I impulse bought it figuring with a GHz Core i and gigs of RAM it was no weakling for a beginner I ve always fantasized about playing games with an SO cooperatively and I thought maybe just maybe this rig could manage FPS in simple games like Magicka or even ambitiously Left Dead But no such luck despite the age of those games My question given that it s got Intel HD integrated graphics it s doubtful the machine even has a PCIe port on the motherboard But before I tear it apart to find out I thought I might Laptop GPU replacement -- Acer Aspire V5 (possible y/n?) ask the wise minds of TechSpot So anybody have any idea if I can upgrade this sucker TL DR Bought a budget laptop for my girlfriend Want to know if I can upgrade from integrated video on this particular model an Acer V - nbsp

A:Laptop GPU replacement -- Acer Aspire V5 (possible y/n?)

There's no way to upgrade a video card in a laptop unless it's something from ASUS, MSI, Alienware, (If you're lucky)

But even if you could, the upgrade would probably be anywhere from $200-$600+ maybe even more. Old 7900GTX Go cards are still fetching roughly $100 on Ebay
 

http://www.techspot.com/community/topics/laptop-gpu-replacement-acer-aspire-v5-possible-y-n.187518/
Relevancy 28.38%

I have a HP dv7-1285dx notebook, and was wondering if you guys know the best battery replacement I can get for my money. My current battery is so shot and can't last at all. I'm hoping not to break the bank like on the HP website.
 

A:HP dv7-1285 battery replacement

There are a few on UK Amazon (presumably on worldwide Amazon too?) for around £30 ($47), just search "dv7-1285dx battery"
 

http://www.techspot.com/community/topics/hp-dv7-1285-battery-replacement.181195/
Relevancy 35.26%

My father wants me to find my mother a laptop, he gave me a budget of around $700. In all likelihood she will mostly use it for facebook, facebook games and movies. She will mostly be using the laptop while working in a coffee stand so she can probably plug it in whenever she needs to. She probably wont replace it for some time so something that will hold up well over the years would be nice. She hates change and is used to using windows systems so I'm not sure if she would go for a mac. I really don't know a damn thing about laptops and I have no idea what to look for or where to start so any help would be appreciated.
 

http://www.techspot.com/community/topics/looking-for-a-laptop-for-my-mother.181330/
Relevancy 29.24%

Hello Everyone,

Been a long time browser of TS and am glad to finally join. I am looking to utilize a Q6600 processor and the following system board and RAM:

ASUS P5G41T-M LX Plus
Corsair XMS3 1333MHz PC3-10666

The goal is to moderately overclock the Q6600 to 3.2 GHz. In my research, I have read many positive reviews about the stability of ASUS boards, and the DDR3 capability is significant to me. However, from what I have gathered, this board can be fussy when overclocking the CPU. Has anyone had any experience with a similar setup?

I would appreciate any thoughts/comments/suggestions.

Thank you!
 

A:New project: LGA 775 board w/ DDR3 needed -- thoughts please?

Firstly, why do you need to overclock it? I'm guessing its more because you want to, than necessity, but my thoughts are below.

I run the exact same CPU in my system 24/7 and while it might be long in the tooth compared with most systems on here, it's certainly not lacking at stock speeds as it is.

Not sure if system specs is easily read right now, but for the sake of doubt, mine are: Intel Core2Quad Q6600 G0 stepping (at stock OC with Corsair H50 (push/pull) providing cooling), Abit AW9D-MAX, 8GB OCZ Gold series DDR2-1066, HD6870, Antec HCG-620 PSU, a SSD and six mechanical disks.

I wouldn't call 3.2GHz a moderate OC on the Q6600, that's more like 2.8-3.0GHz. I used to have mine overclocked but the difference was so minimal (in real terms) that the additional heat it gave off and power it consumed made it pointless. I was never able to achieve 3.05GHz or above either, but I've no doubt that more experienced hands would have managed it. Overclocking is my weaker subject in the field of IT generally speaking, and I can't say I've ever really pushed the envelope very far in that regard.

Though that said, I've always found Gigabyte boards to be much more forgiving when it comes to RAM settings. Asus in my experience can be a real nightmare with recognising the default timings and voltages for RAM, and in "my experience" need much more work to achieve the same result.

Another point that needs to be considered is LGA-775 is legacy hardware now, so you'd be spending money on defunct hardware. If you have the CPU it might be better to grab a second-hand board off of eBay or something, or maybe look to something newer and more current.
 

http://www.techspot.com/community/topics/new-project-lga-775-board-w-ddr3-needed-thoughts-please.180344/
Relevancy 29.24%

Bought me recently a new MoBo: P8H67, installed it, killed Realtek onboard in the BIOS, all thus far goes splendid.
Put in SoundMax (from my P5E Lifestyle), hardware checks ok.
Install driver... and here things go awkward: no matter what I try: SoundMax Hi Def is not found/recognized.
Tried both the DVD-soft that came with me P5E, as well as online new drivers, to no use...

Reason for SoundMax: I was slightly baffled by the power behind the tiny card, it was literally mindblowing (over my JBL's).
This power is not found on Realtek hardware, hence.

Prob: I want to keep using the tiny SoundMax, but I desperately need a driver.

Win 7 Ultimate X64 (registered)

Suggestions?

Thank you all:
Ben
 

A:P5E Lifestyle Board SoundMax to Asus P8H67

List any Problem Devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save to your Desktop
In TechSpot window, use the paper clip icon to attach the report. (If you don't see icon you may need to first click Go Advanced)

 

http://www.techspot.com/community/topics/p5e-lifestyle-board-soundmax-to-asus-p8h67.178931/
Relevancy 28.81%

I ve had this keyboard http www amazon com Microsoft-Reclusa-Gaming-Keyboard-Black dp B MR XWK for quite a while now almost years and it has been quite an adventure The basic UI it came replacement Keyboard with was perfect as I don t Keyboard replacement want to spend hours and hours Keyboard replacement trying to figure out how to open my media player with button Leading me to my basic and very important need for a new gaming keyboard My new keyboard will need to have media controls that open things besides Windows Media Player Ituns Spotify etc I despise WMP and often click to use my music without a thought It s convenient and a luxury I no longer choose to live without I don t care whether the KB is mechanical or Keyboard replacement not as long as the keys aren t squished together raised to ridiculous quot ergonomic quot heights or covered in a rubber that will fade in a few months My reclusa has just one button that the letter has faded from in it s years of use I think that s pretty awesome when world of warcraft is basically just spamming one button for hours at a time I would like my new KB to have macro keys besides the media panel which I m assuming all gaming KBs come with today and as user-friendly as possible I looked up the BlackWidow linked as the quot Unicorn quot KB on MMO s Setup of the Month and found that quite a few people are experiencing issues with keys becoming stuck in some way or another or just failing to work at all something like - I don t want to play the lottery when I m spending this much money on a luxury item The quot Narwhal quot keyboard G seemed fantastic until I realized the keys are TINY smaller than my laptops keyboard This is just unacceptable So all-in-all guys and gals I am looking for your kind help If you ve got the perfect KB or maybe have owned one in the past that meets my needs please post its name model Very much appreciated Also what the hell is the big deal with quot mechanical quot keyboards Req Again Keys that won t fade Keys the standard or close to size Media controls for things besides WMP Easily programmable macro keys Backlit Could be red white and blue as long as it lights up with some form of lighting Not required but would be nice headphone jack that does not cut out any sound nbsp

A:Keyboard replacement

Do you know Google?
http://www.xoxide.com/gaming-keyboards.html
 

http://www.techspot.com/community/topics/keyboard-replacement.178757/
Relevancy 28.38%

I have a Dell Inspiron with an extended life battery that sticks out the back a little The power cord is dying - works intermittently I have a potential replacement cord that came with a different laptop I d like to use However I am uncertain if this may cause problems or even be unsafe First concern The current non-working power cord has a hexagonal cross-section male end that plugs into the laptop The replacement cord has the more typical round cylindrical end The replacement cord does fit in the laptop and it is not apparent physically that it is a problem Second Concern The current non-working hexagonal cord input matches the input on the replacement round cord as expected since they re U cord Power replacement S cords meant for U S power sources However the output is not Power cord replacement the same current non-working hexagonal cord output DC V A replacement round cord output DC V A Will the higher amperage of the replacement cord cause a problem especially a potential safety issue The laptop is left plugged in for long periods of Power cord replacement time unattended I d hate to start a fire Can someone with more electrical knowledge let me know if my concerns have merit or is my little but more than zero knowledge of electricity creating a concern where there should be none nbsp

A:Power cord replacement

gr7070 said:





First concern:
The current, non-working, power cord has a hexagonal (cross-section) male end that plugs into the laptop. The replacement cord has the more typical round (cylindrical) end. The replacement cord does fit in the laptop and it is not apparent, physically, that it is a problem.Click to expand...

If the cord will fit the plug without changing polarity, you don't have a problem there.





gr7070 said:





Second Concern:
The current, non-working (hexagonal), cord input matches the input on the replacement (round) cord, as expected since they're U.S. cords meant for U.S. power sources. However, the output is not the same.

current, non-working (hexagonal), cord output: DC 19.5V 3.34A
replacement (round) cord output: DC 19.5V 4.62A

Will the higher amperage of the replacement cord cause a problem, especially a potential safety issue? The laptop is left plugged in for long periods of time, unattended. I?d hate to start a fire.

Can someone with more electrical knowledge let me know if my concerns have merit or is my little, but more than zero, knowledge of electricity creating a concern where there should be none.Click to expand...

As long as you operate at the same voltage and supply enough current you will be fine. Same voltage as in DC or AC and the same number value for the amount of voltage.

Current values (3.34A) can be higher as long as the are not lower, your device will only draw the current it requires. If the device requires more current than is available, this is where problems start to arise.

I could go into more details but I will spare you the other un-known language. LOL





gr7070 said:





The laptop is left plugged in for long periods of time, unattended. I?d hate to start a fire.Click to expand...

I'm not going to tell you that it's not possible for it to start a fire but it's highly unlikely. The most common effect would be frying components on the inside of the power supply or PC. You might smell the components afterward but usually nothing more. As long as you stick with the same voltage and the same or more current, you shouldn't have any issues.
 

http://www.techspot.com/community/topics/power-cord-replacement.177463/
Relevancy 27.95%

I have look on alot of websites and havent found one that is compatible. Would like some ideas or places to look. Thanks
 

A:I need a replacement fan/cooler for a Nvidia GeForce GTS 250. Ideas?

try some custom cooling? maybe a heatink of an old card with some extra fans spliced in
 

http://www.techspot.com/community/topics/i-need-a-replacement-fan-cooler-for-a-nvidia-geforce-gts-250-ideas.176624/
Relevancy 29.67%

i was wondering if HIS H675FS1G Radeon HD 6750 1GB 128-bit DDR3 PCI Express 2.1 x16 HDCP Ready Video Card would work on a MSI G31TM-P21 LGA 775 Intel G31 Micro ATX Intel Motherboard.

Card # at Newegg=N82E16814161395"]

Board#at Newegg= N82E16813130234

o wait the card is ddr3 , does that mean it won't work?
 

A:Graphics card compatible with this board?

Sure, the card will work fine. The graphics card memory is independent from the memory type of the motherboard.
 

http://www.techspot.com/community/topics/graphics-card-compatible-with-this-board.176985/
Relevancy 27.95%

I am hoping one of you fine people can help me to find a replacement motherboard for my HP Pavilion p p I have gone through the Pavilion Replacement HP p6226p for motherboard needed whole troubleshooting routine -- all peripherals RAM replaced with known-good power supply amp CPU and still can not get into the BIOS setup or boot Replacement motherboard needed for HP Pavilion p6226p past the HP splash screen I m down to replacing the motherboard now This computer currently has Motherboard -- M N -LA Viola CPU -- AMD Athlon II x Quad Core Graphics -- NVIDIA GeForce Integrated I m fine with a replacement motherboard with at least equivalent graphics as I do occasionally game with my boyfriend League of Legends Magicka running on lowest settings is fine with me I Replacement motherboard needed for HP Pavilion p6226p m in the market for a new computer but would like to keep this one limping along for another months or so if all it will cost me is a motherboard I have a Frys amp Microcenter nearby located in Houston and would like to go pick up a shiny new motherboard ASAP so if you could point me to one on their site it would be greatly appreciated Thank you for your time nbsp

A:Replacement motherboard needed for HP Pavilion p6226p

Check here and make sure that you have a PayPal account:
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=HP+M2N78-LA+Motherboard&_sacat=See-All-Categories
 

http://www.techspot.com/community/topics/replacement-motherboard-needed-for-hp-pavilion-p6226p.175822/
Relevancy 28.38%

I have a HP Pavilion DV7 - 4285dx which comes with a Multi DVD +/- DL blah blah whatever drive in it. (no bluray)

I would like to know if I could find a replacement bluray drive for this laptop.

Does anyone know where I could find this or if this is even possible?

I would assume its possible since that I had bought a bluray drive for my PC, and it works.
 

A:Pavilion DV7 Blu-ray drive replacement

After some more research I found a replacement part that should work.

For anyone looking for similar answers, the part number is 605417-001 CT21L

Just do a google search with part of that number or all to help find the correct parts.

Thanks everyone....
 

http://www.techspot.com/community/topics/pavilion-dv7-blu-ray-drive-replacement.174167/
Relevancy 28.81%

Hello. I have a custom-built computer with a Gigabyte GA-KN8SC-939 motherboard with a Athlon64 3500+ processor. The motherboard had been having problems starting about a few years ago with random crashes occurring whenever devices were plugged in to now crashing and freezing up on a regular basis. I suspected it was the motherboard (no other devices were having problems, and the memory wasn't faulty), so I believe I need to replace the motherboard. However, knowing the age of this computer, I don't know if it's possible. Do you guys know of a motherboard that would have performance similar to this one and also work with a Socket 939 Athlon64 3500+ processor?
 

A:Need help a replacement motherboard

About the only place you will find a 939 board these days is ebay or at a computer shop that deals in used hardware. For less than $150 you can get an AM3 board Athlon II X2 and 4GB DDR3 If you want to go that route.
CPU: AMD Athlon II X2 250 Regor 3.0GHz
Motherboard: ASRock M3A770DE AM3
RAM:Crucial 4GB 240-Pin DDR3 SDRAM DDR3 1333

A setup such as this while not exceptionally powerful by todays standards, would run circles around that old socket 930 Athlon64 3500+ processor.
 

http://www.techspot.com/community/topics/need-help-a-replacement-motherboard.171821/
Relevancy 29.67%

I have been going through the process of building a computer for the first time and the motherboard is the final piece of the puzzle I am seriously considering the Asus Maximus Gene-Z as the motherboard to go along with GB Hawks OC in SLI on mATX a Is SLI usually on board avoided? air to go along with an OC i - k but I have been seeing some concerns about temperatures in general As far Is SLI on a mATX board on air usually avoided? as cooling the board would be in a mid-tower that has the dimensions of the full tower Storm Sniper with its default fans and the CPU would be cooled by a Corsair A I do have a few ATX motherboard in mind if the mATX option isn t ideal for SLI including the MSI Z A-GD ASUS P Z -V PRO or ASRock Z EXTREME GEN i - K Corsair A GB GTX Hawk in SLI x GB G Skill Sniper DDR Samsung Spinpoint TB Asus x DVD-Drive Cooler Master Storm Sniper Seasonic X- nbsp

A:Is SLI on a mATX board on air usually avoided?

Personally if I was building a computer without having any hardware to start with I would probably aim for a higher end single card rather than 2 older and now mid range 460 GTX cards. That way in the future you can pickup another higher performance card and then use SLI.

As for mATX and SLI, as long as the board supports it then there is no problem. You have stated its in a full tower so airflow won't be a problem. You might find some problems such as PCI 1x slot blocked/unusable when you have two double slot (two expansion slot height) PCI-E graphics cards in the motherboard.
 

http://www.techspot.com/community/topics/is-sli-on-a-matx-board-on-air-usually-avoided.171814/
Relevancy 30.1%

Hi all I have an asus x s laptop and a while ago the power jack inside broke off and went further into the unit I managed to take the laptop apart and retrieve the jack I then rather stupidly attempted to desolder board PCB Splintered the remainder of the unit from the board and found that apparently ASUS use diamond as solder that or I wasn t doing something right Anyway point is that the contacts stayed in the board no matter what and only with force Splintered PCB board and heat did they come out unfortunately however there are still two contacts firmly in the board Anyway as you can all imagine the inevitable happened The board warped slightly and on one of the corner points the iron went through and splintered the side picture attached A couple of questions Number And I think I already know the answer to this As this has happened will this be detrimental to the running of the laptop I m going to guess that the second I turn it on should I be successful in replacing that the power will short and the world will end or something Number Since last using the laptop I can only assume that the rest of the components processor RAM Drive etc are still in good working order and I m wondering just how successful anyone may think it would be to sell the laptop as spare parts or would I be better off taking into the yard with a shotgun Sorry about the cynical nature of this post that s just how I am that and I m incredibly annoyed at myself for thinking that me soldering iron delicate electronics was ever going to have any other outcome than this nbsp

http://www.techspot.com/community/topics/splintered-pcb-board.171757/
Relevancy 29.67%

Need info old board P4SD-VL

Hi,

<I'm trying to fix a very old pc; it's almost ready but I can't set front USB ports.>

That´s what I said. But more than a simple thing I need; USB frontal ports are working now. The matter is I can´t find drivers to set Sound, LAN, Modem... The pc is working fine, I've installed operating system, office programs and some other software without trouble.

Thanks in advance for your help.

Mauricio
 

A:Need old board P4SD-VL front USB pin description

Who made the motherboards chipset? VIA?
 

http://www.techspot.com/community/topics/need-old-board-p4sd-vl-front-usb-pin-description.170893/
Relevancy 28.81%

hello, ive had this desktop computer for years now and the processor is extremely outdated. I have been looking around trying to figure out how i can upgrade the processor speed but it seems the more i look up the less i know about computers...

anyways i have: Board: MICRO-STAR MS-7184
Serial Number: 5922655884

current proccessor: 2.00 gigahertz AMD Athlon 64
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Not hyper-threaded

I believe the socket is a 939? when i looked up these specs i found that the highest processor i can place is " AMD Athlon 64 X2 (up to 4800+) and Sempron (up to 3200+) processors".

Can anyone verify this?Or is it not worth investing in a new processor? i am looking to find the best upgrade rather then spending cash to buy a new computer. Any advice would be extremely appreciated.
 

A:Looking to upgrade processor, board Micro-Star MS-7184

Hey Noctis,

Truth be told you are better off upgrading your Motherboard, RAM, and Processor if you want to see any substantial difference. A socket 939 is quite a bit old and since then they have move onto the AM2, AM2+, AM3, AM3+, etc sockets for AMD Mobos and Processors.

Socket 939 processors are to the point where they are no longer just old enough to be cheap. Since they are no longer made they are old enough to be more expensive than modern counterparts in many cases.

When upgrading the MOBO and CPU you want to look into more than just the processor speed. Important factors are also the types and amount of cache for a processor, number of cores, and RAM that can be used with that CPU.

The newer Athlon II X2s as an example are a significant leap from the original Athlon 64s and a discerning buyer online can find them significantly cheap. AM2+ boards are currently somewhat inexpensive and so is DDR2 RAM. They are currently at the stage where they are old enough to be somewhat cheap but with the newest socket and processors being sold by AMD now it may change iwthin the next few years to start getting expensive again from being old enough.

You also have the route of a AM3 with DDR2 or DDR3 Ram option available which are also moderately priced.

If you check out the website pricewatch.com you can look at pricing for several different mobos, cpus, etc from various websites easily. I just completed a full build including case, HDD, Mobo, CPU, DVD-RW, RAM, Graphics card, etc for just over $350.00
 

http://www.techspot.com/community/topics/looking-to-upgrade-processor-board-micro-star-ms-7184.170905/
Relevancy 28.38%

I purchased a replacement DVD R/W for my Dell Inspiron E1505. When I start up the computer the light comes on the drive and I am able to open the drive by pushing the button on the drive. my problem is the drive does not show up on "my computer" nor in the device manager. I updated my BIOS from the Dell website but that did not fix the problem.
The seller said he tested the drive on laptop the same model as min and that it worked. Any help would be greatly appreciated.
 

A:DVDR replacement not seen by laptop

The optical drive may be defective. Return it for another...
 

http://www.techspot.com/community/topics/dvdr-replacement-not-seen-by-laptop.170051/
Relevancy 27.95%

I am replacing an old mobo due to constant running and bulging capacitors. But its my first time dinking with anything mobo related. Or really anything that isn't replacing a bad PSU.
The old one is an MSI P965 Neo-7.
The new one is a Biostar G41 DVI.
I have the CPU installed fine and went to put the heatsink on top (Ultra brand). The screw holes are too small. Of course, that's when I noticed that I didn't remove the mounting bracket for the heatsink from the back of the old mobo. But I can't get it off. It seems to be glued in using some kind of foam tape pad. The new mobo didn't come with a mounting bracket.
Is there some kind of way to remove the old mounting bracket and install it on the new mobo OR do I have to find myself a new mounting bracket (or heatsink) somewhere?
 

A:Heatsink mounting bracket - removal or replacement?

Usually some foam is placed between the mounting bracket and the back of the motherboard to prevent the board from getting short circuited. The foam has probably stuck to the two surfaces and hardened over time, which is why they seem glued together. If you aren't worried about damaging the old board (since you are replacing it), just pry off the old backplate with a screw driver.
 

http://www.techspot.com/community/topics/heatsink-mounting-bracket-removal-or-replacement.169958/
Relevancy 28.38%

I tried to replace the keyboard on my sons Dell Inspiron and the black flip tab/clamp that holds the ribbon wire to the motherboard broke. Any ideas on where to find a replacement or how to connect it securely another way? I really don't want to buy a new motherboard and Dell doesn't offer the part by itself. Thanks in advance for any help.
 

A:Dell Inspiron keyboard replacement

Common trouble... I have purchased a non-working laptop just for these clips. Now I have spare motherboards that I can salvage these parts from. There's really no other way to fix this
 

http://www.techspot.com/community/topics/dell-inspiron-keyboard-replacement.168536/
Relevancy 28.38%

suggest me a gud mobo as my old mobo is dead. asus preferred and budget is 100-120$ [5k-6k INR]





SYS CONFG:



DELL E2210H, C2D E8400 , 3x2GB DDR3 @ 1333mhz TRANSCEND JETRAM , 1TB SEAGATE HDD, MSI ATI R5770 running win ultimate 64bit.

PSU - 550W HUNTKEY greenClick to expand...


 

A:Replacement mobo for my old DP45SG

Can your Dell case hold a full ATX motherboard?

Also, if your CPU cooler is held in with 4 screws you will find you'll be needing a new cooler to go along with the new motherboard.

You may also find your new motherboard will not fit in the Dell case, so you might also need a new case to go with that.
 

http://www.techspot.com/community/topics/replacement-mobo-for-my-old-dp45sg.168741/
Relevancy 28.81%

Hi y'all

I got a Intel Server Board L440GX with the dual Pentium III processors and i cant get it to recognize the Mylex eXtreme RAID 2000 FW 7.01-00. I have never configured a raid before but i think i got it right(not sure) anyway the bios says that no h.d. or likewise is installed. I ain't got any ideas on what to do please help
 

A:Intel server board L440GX RAID issues

bwta, sound like you better take a look at:
http://download.intel.com/support/motherboards/server/l440gx/AcceleRAID1_0.pdf
 

http://www.techspot.com/community/topics/intel-server-board-l440gx-raid-issues.168173/
Relevancy 27.52%

Hey guys,I'm thinking of getting a fairly used hp desktop replacement.about a year old,but seeing the article on the site about people having issues with desktop replacements,I'm having second thoughts.Can anyone recommend an alternative?
 

A:Is buying a CUDA desktop replacement a good idea?

What kind of budget are you working with. A desktop worth mentioning in your situation makes work sound fun again. What will you be working on? Can't think of any alternatives to a desktop replacement, besides an actual desktop. Sounds like you need something powerful to use on the go.
 

http://www.techspot.com/community/topics/is-buying-a-cuda-desktop-replacement-a-good-idea.164810/
Relevancy 28.38%

Hi there,

I'm new the forum and could use some advice. I have experience with removing and replacing all parts of the computer except motherboards.

Cutting the long story short, I tried updating my BIOS last night and I have now ended up with a corrupt BIOS and everytime I try to boot from my Windows 7 CD it blue screens.

I think its time for an upgrade and therefore I would like some suggestions on a new motherboard. I have already bought a 1TB SATAII HDD which is on its way. I would like to replace the motherboard.

I currently have a ASUS P5N73-AM

My computer has a Quad-Core processor, I don't need the built-in Graphics card as I have a stand-alone ATI card. I have 4GB of RAM, but if possible would like to upgrade to 6 or 8.

Any suggestions?

Thanks for you help in advance,

Jon
 

A:Replacement motherboard - some advice?

We need to know the exact model of CPU, but from what you've said, you have a LGA775 motherboard, and DDR2 RAM. Your CPU is likely a Core2Quad, but it doesn't hurt to confirm exactly what CPU you have.

You will be limited by the fact your current motherboard is also mATX, and because most DDR2 motherboards in that format for your CPU have only two slots available, and a max RAM of 4GB - it looks like your at your maximum already.

That said, here are some I would consider (I prefer Gigabyte over everything else but its personal preference):

1. Asus P5KPL-AM EPU iG31 Socket 775 onboard VGA 6 Channel Audio mATX Motherboard £32.94 from eBuyer
2. Asrock G31M-S R2.0 G31 Socket 775 VGA Out 6 Channel Audio mATX Motherboard This supports 8GB RAM £32.99 from eBuyer
3. Gigabyte GA-G31M-ES2L iG31 Socket 775 onboard VGA 7.1 channel audio mATX Motherboard £33.00 from eBuyer
4. Asus P5QPL-AM iG41 Socket 775 onboard VGA 6 Channel Audio mATX Motherboard this supports 8GB RAM £34.90 from eBuyer

You will need to ensure you check your CPU is supported by the motherboards above if you wish to purchase them - or let us know and we can confirm for your peace of mind.
 

http://www.techspot.com/community/topics/replacement-motherboard-some-advice.163836/
Relevancy 28.38%

Replacement components for a computer that does not post My desktop computer has been exhibiting unusual components that not a does Replacement POST computer for behavior over the pass week Unfortunately my pc does not always post when the power button is pressed Sometimes the computer turns on after several hours When Replacement components for a computer that does not POST the computer does not post I cannot hear the drives spin up or any posting process including beeps Unfortunately my time is limited for Replacement components for a computer that does not POST researching and troubleshooting the situation since this computer is down I have re-seated all the components inside the case yet do not have additional components to swap in and out The computer switch seems to work on the case When opening the case and pressing the power button CPU graphic card and case fans turn on The paperclip switch technique did not make the computer post either same effect as the power button Changing the motherboard battery made no difference My initial thoughts relates to the motherboard or video card since the power supply is less than months old Corsair TX W When the computer turns on it does not encounter any errors or hiccups and performs as expected My first inclination is to begin looking into replacement components yet I was not planning a major system upgrade So I humbly request suggestions on replacing my motherboard processor and video card My current system has processing power for most computing tasks except when doing heavy multi-tasking with streaming HD video My requirements for replacement components would revolve on a dual monitor setup moving large files file archiving and HD video decoding in a multi-tasking environment This rig does not serve as a gaming machine Value is a top priority for replacement components My budget will be between and AMD seems like the better value The Phenom II X T looks good with cores The motherboard and video card are not easy choices It has been years since my last system build and the technology has rapidly evolved The motherboard should have at least Sata connection most seem to have and on-board sound USB would be nice yet not essential The video card should be powerful enough for basic photo editing and viewing HD content I do have GB of OCZ PC ram from a previous hot deal yet it did not work under my current setup Below is a short list of potential candidates for replacement component and my current system I am hoping this thread would begin a discussion on the components that offer the best bang for the buck Any suggestions would help me avoid major disappointments with getting this system back online Update The computer has not turn on in several days it may be completely dead Replacement Components ----------------------------------- Phenom II X T Black Edition ASUS M A GTD PRO USB AM AMD GX SATA Gb s USB HDMI ATX AMD Motherboard XFX Radeon HD Video Card or something under Current System --------------------- Processor Athlon X GHz MB L Cache Socket Heatsink AMD Heatsink-Fan Thermalright XP- C w mm Fan Motherboard A N-SLI Deluxe Video Card XFX GeForce GT -MB PCI Express Power Supply Corsair TX- w Memory x GB Mhz PC DDR RAM PIN DIN Monitor Dual Dell Inch WA nbsp

A:Replacement components for a computer that does not POST

Take it to a respected computer repair shop, and find out exactly which component is failing. It might cost you $60 -$90, but will save you money in the long run.
 

http://www.techspot.com/community/topics/replacement-components-for-a-computer-that-does-not-post.162257/
Relevancy 28.38%

I currently have this monitor http www newegg com Product Product aspx Item N E amp Tpk wb It doesn t say what the backlight is is light for looking replacement Monitor dark, too but I m pretty sure it is a CCFL My monitor is too dark I replaced a quot monitor with a cd m that was brighter than this and it is listed as cd m When I got the monitor I needed a replacement and didn t bother sending it back Now it is too late for that I would like to know if I can replace the back light If so where can I get one I ve done a fair bit of googling and have not found anything I don t really know how to search for this kind of thing I would like to note that I very much enjoy this monitor and the pros out weight the cons by an order of magnitude I Monitor is too dark, looking for replacement light would Monitor is too dark, looking for replacement light buy this monitor again even if it really is dark It has NO DITHERING even with very close shades over a large area The ms response time isn t noticeable I think that this is measured in a full black-to-white instead of the more popular gtg anyway any help is much appreciated even if the answer is quot no that s not possible quot nbsp

A:Monitor is too dark, looking for replacement light

Although it's not something I've ever attempted myself it looks as though it can be done. Found this link as a possible source for the lamp itself and it appears there is a link for instructions. Didn't track it to your specific monitor and don't know if these guys are reliable but maybe it's a good place to start.

http://www.lcdparts.net/adword/nettCCFL.aspx
 

http://www.techspot.com/community/topics/monitor-is-too-dark-looking-for-replacement-light.162844/
Relevancy 29.67%

Hi, (First Post)

While it is often true that when you get no post after startup, that it is often the powersupply - it would be nice to know if the motherboard is functioning properly.
I use power supply testers, a great time saver, but does anyone know of a reasonalby inexpensive motherboard tester on the market?
 

A:Board test equipment

Well, I have seen a few mobo/ram testers on Ebay but have no idea how good they are. Just do a search on there for motherboard tester and several will come up, they are about £20.
 

http://www.techspot.com/community/topics/board-test-equipment.162741/
Relevancy 28.38%

I need a new battery or charger for toshiba laptop A105-S2101. The battery is a PA3451U-1BRS and its a DC 14.4v 2000mah.

Well first off the battery wont hold or take a charge. Everytime I unplug it from the wall the laptop goes off too. The lights do come on the laptop showing that its charging.

2nd thing is does voltage matter on battery replacement? I cant find 14.4 replacement thats cheap. All ones I find 10.? volt with 4000-4400mah on ebay.
 

A:Laptop battery replacement

You need to use the same battery, and the same charger voltages. High capacity batteries usually have a higher mah figure, but I would replace them like for like.

Batteries are never cheap, and they do wear out - some faster than others, but eventually they all die and stop holding charge.
 

http://www.techspot.com/community/topics/laptop-battery-replacement.160084/
Relevancy 28.38%

I am looking for a new case and PSU for my current computer and my next computer after I upgrade -------------------------------------------------------------------------------------------------------- Current System Spec -------------------------------------------------------------------------------------------------------- Q GHZ GIGABYTE EP -DS R GB PC case and a PSU computer Looking replacement for mhz x gb x gb Nvidia GTX mb Asus Xonar DX soundcard Windows x Jeantech W PSU Operating system is on TB drive two TB data Looking for a replacement PSU and computer case drives one GB drive all sata drives -------------------------------------------------------------------------------------------------------- I will be replacing the budget case I currently use and the quot Jeantech W PSU quot After a lot of research the best candidates in my opinion Coolermaster CM II Advanced Case Corsair W HX modular PSU My concerns are whether these will be suitable for use after I upgrade I will be investing on my next CPU motherboard RAM GPU and will be upgrading to whatever offers the best price performance I could upgrade now but have been advised to wait for the next generation of hardware to hit which should spawn some bargains on the current top hardware Considering my budget I do not want to overlook a quality case and PSU The Coolermaster CM II Advanced offers versatility with modular drive bays and the like I don t know whether W will be enough though To note I don t think I ll run a multi-GPU setup it just seems like a major headache I am more likely to buy a dual core GPU if it is worth it Case fans are something I have always overlooked in the past I have read some things about where to position fans in a case for optimal airflow Now I need to figure out which fans I should get To quote from the specification Air cooling support for up to fans with support for up to x mm fans x Case Fans are included - Front mm Blue LED Fan Top mm Fan and rear mm Fan Will I need anything else Are there better options I can replace these with Thank you very much for any suggestions nbsp

A:Looking for a replacement PSU and computer case

Excellent picks. Both of them should do fine for all your future upgrades.
 

http://www.techspot.com/community/topics/looking-for-a-replacement-psu-and-computer-case.161649/
Relevancy 28.38%

I'm finding that now that I've got two of them running in crossfire the XFX card I have with the reference ATI cooler is running hot. After last gaming session MSI Afterburner reported 87C max temp. So I've been playing with the idea of selling it and getting another MSI card which comes with a very good cooler, or just buying a cooler (which would probably cost around the same as selling the XFX card and putting money toward a new MSI one).

Anyone got any experience? Any recommended coolers? Tips for installation?

Thanks.
 

A:Anyone tried replacement cooler for HD5850?

Hi Arris,
This cooler is very good if you want to go the replacement route. I Don't know about prices in Scotland, but here the prices on the 58xx series are very good, and as good as they are probably going to get. as far as installation tips. more GPU's get damaged because people pull straight up when they remove the heat-sink. When you are ready to remove it, gently twist it back and forth keeping it on center until you break the (now very set) thermal compound loose. Be very sparing on the thermal compound as well. it does not take much to cover the small chip.
hope that helps some.

http://www.arctic.ac/en/p/detail?sArticle=22.?
 

http://www.techspot.com/community/topics/anyone-tried-replacement-cooler-for-hd5850.161012/
Relevancy 28.81%

ok first off i got this board second hand from my brother he couldnt get it to work at all however he thought it was a video card compatability issue He had a ATI Radeon card and its an NVIDIA chipset on the board Now that ive giving a tiny bit of back ground ill give you the systems specs or atleast the specs itll be once its working and can see things CPU Intel core duo E RAM GB DDR x OCZ REAPER Motherboard As mentioned EVGA NVIDIA i sli GPU GEforce GS PSU Sparkle W gold class TB for storage and a GB + no =( sli output board video Evga 680i Nvidia for the OS Thats whats in my box and the box itself is a Rosewill Evga Nvidia 680i sli board + no video output =( CRUISER So far everything looks like its powers up right and and the HDD spins up it seems like its posting correctly i jus cant get anyvideo out of it Any suggestions would be helpful also keyboards will not work in any usb port and on the mointer it says entering power save mode it detects the cable being there but does not get a signal ive tried multiple keyboards and multiple video cables nbsp

A:Evga Nvidia 680i sli board + no video output =(

sounds like it's just a faulty board... it doesn't matter if you have a single ATI or NVIDIA card, it should work with either
 

http://www.techspot.com/community/topics/evga-nvidia-680i-sli-board-no-video-output.160688/
Relevancy 27.95%

I have a Toshiba Satellite A350D-005 and I had a major spill on the keyboard, I took the keyboard out and am going to replace it as the whole things is trashed but the laptop its self its perfectly fine. My question may sound really stupid but if I bought a replacement keyboard of a different model would it work? There are some very similar models such as A300D-005 for much cheaper than mine. What would happen if I were to use it?

Thank you,

Brandon.
 

A:Laptop keyboard replacement (stupid question)

Your best bet is to dig around on Toshiba forums or just on the net in general. You'll often find that all models in a range will share many of the same parts. See if you can find a part number for the keyboard either from a label or part number on the keyboard or the manual/toshiba website. You'll probably be able to use a keyboard from any Toshiba of that age/range but best double checking first.
 

http://www.techspot.com/community/topics/laptop-keyboard-replacement-stupid-question.160672/
Relevancy 21.07%

My first post so please be patient with me. My PC is a Dell Dimension 8200, (vintage 2002) Pentium 4, 512 cache, 2GB memory, 120GB HD.

I upgraded my OS from Win XP Pro to Win 7 Ultimate in Nov 2010 and my soundcard completely stopped working as being incompatible with Win 7. There are no updating drivers as it is old technology according to the manufacturer (Voyetra Turtle Beach Santa Cruz DSP). Went downtown and bought a replacement and when I tried to install it I found that the connectors didn?t match. The salesman said that Dell uses proprietary connectors therefore I must use a Dell card. Dell doesn?t have any for my outdated system.

So my question is: Will a USB soundcard, (such as the Sound Blaster X-Fi Surround 5.1 Pro or equal) actually solve my problem, i.e., do everything a regular soundcard does? It just sounds too good to be true!

Many thanks for any assistance you can provide.
 

A:USB sound card replacement for regular sound card?

Did you motherboard come with on-board audio and you added the Turtle Beach sound card or did that sound card come with the PC. Your PC can use a PCI card, not a PCI-express card.
 

http://www.techspot.com/community/topics/usb-sound-card-replacement-for-regular-sound-card.160365/
Relevancy 28.81%

I have a comp. with an ASUS PSN-MX motherboard and it needs to be replaced. I couldn't find one online. Any recommendations on another mobo that would work in place of this one on a small budget?
 

A:Motherboard replacement

You sure it's not the ASUS P5N-MX you're talking about? there's plenty of them online, just type it in Google.
 

http://www.techspot.com/community/topics/motherboard-replacement.160056/
Relevancy 27.95%

Hello,

My socket AM2 based computer has a faulty motherboard and needs a replacement to get it up and running again. It does not turn on, I have ruled out the other components as the cause of this problem.

The other components are:

AMD Athlon 64 4xxx/5xxx+ X2 series dual core processor
2GB PC3200 RAM
Asus 7900GS GPU

It looks like a replacement will cost around £25-60 judging by what is available on ebuyer.com.

Any suggestions/recommendations? Anything on par with the old motherboard will be fine. I won't need something future proof as this is only a secondary computer my family uses.

I will be upgrading my own computer next year and passing it down to them so we are only looking at getting this computer back up and running in the meantime (they are currently stuck with the aging laptop!)

Thank you in advance your help will be much appreciated

also, Merry Christmas =)
 

A:Replacement needed for socket AM2 motherboard (M2N-SLI Deluxe)

You might have made a typo in describing your CPU. Is it an Athlon 64 X2 4600+?

I am surprised how few retailers are selling AM2 boards these days. TigerDirect has two and Newegg has three available. Personally, I would go with the Foxconn one, but I am biased for Newegg. haha
 

http://www.techspot.com/community/topics/replacement-needed-for-socket-am2-motherboard-m2n-sli-deluxe.158400/
Relevancy 28.81%

My PC has been fine for 2 and a half years now, I've never had a part overheat or stop working, but I still don't have any replacement parts. So I'm not looking for duplicates (especially since my motherboard is now out of stock and/ or prohibitively expensive), but upgraded parts still compatible with my current gpu and RAM, primarily a motherboard, as these seem to be the parts I've heard of shorting out the most. I don't need SLI or RAID, I just need something reliable that isn't huge and expensive. Hopefully if one piece has a problem it doesn't short out any others.

I think the rest of the parts are fine.
 

A:Replacement parts

It's going to be hard to recommend anything without knowing what you currently have. Having an extra power supply on hand would be a good idea. I've only lost one motherboard in the last 15 years so mine tend to last until they're replaced.
 

http://www.techspot.com/community/topics/replacement-parts.159583/
Relevancy 28.38%

As it appears mine is failing, I'm looking to replace my old ATI Radeon 9800XT graphics card with same product (just trying to keep this old computer going/gaming till I can finally get a new system). I've found several "new" Radeon 9800XT cards for sale at reasonable prices, but they're not made by ATI/AMD. Apparently they ARE made with ATI/AMD chips and GPU's. Can anyone please advise as to whether these cards are comparable to the original product? I was hoping to just be able to swap out the card and not have to deal with driver uninstall/reinstalls. Is this possible with these 3rd party ATI cards or do they use different drivers/software?

Any advice is appreciated!
 

A:ATI Radeon 9800XT replacement question

If the brand of the replacement card is Diamond or Sapphire it's basically the same thing, think there were a few others. If it's a reference design then your existing drivers should work, really need to know the exact brand to be sure.
 

http://www.techspot.com/community/topics/ati-radeon-9800xt-replacement-question.159402/
Relevancy 29.67%

Hello I have a desktop with motherboard Via KT CF- ruinign on windows xp I had a MB memory and the computer was running very slow with lots K7VTA3 ECS RAM v8) fully isn't recognized (board of RAM isn't fully recognized (board ECS K7VTA3 v8) lags I decided to buy some more memory and bought the lot of two kit Kingston KVR X C AK total of GB I opened the computer and inserted the two memory sticks on the motherboard and switch on the computer As it runs BIOS says only MB Ram and not GB RAM Other times it reads sometimes says MB and one time said MB RAM Its very strange this Whats going on I dont know but the site says that the board accepts DDR SDRAM Did I bought a wrong set of memory sticks or is it something wrong in the computer data from Everest software ID Motherboard -KT CF- -K VTA C- Motherboard ECS K VTA v Physical Memory Total MB Used MB Free MB Utilization North Bridge VIA VT Apollo KT Thanks Boto nbsp

A:RAM isn't fully recognized (board ECS K7VTA3 v8)

I dont know but the site says that the board accepts DDR200/266/333 SDRAM.Click to expand...

You bought DDR400 so I'd say your RAM is not supported by your motherboard. Also, the voltage standard for your motherboard is 2.5 volts. Your RAM needs 2.6 volts although it should still run if your motherboard supported it in the first place. You might be able to bump up the voltage in the BIOS but I can't say for sure.
 

http://www.techspot.com/community/topics/ram-isnt-fully-recognized-board-ecs-k7vta3-v8.159153/
Relevancy 28.38%

Hey guys, got a question that I wanted to see if anybody could answer. I'm coming to you from my PS3, because yesterday after having to "wiggle and jiggle" the power cord to get my laptop to charge, it finally crapped out. I'm pretty confident that it's the power terminal (located on the motherbored) and possibly the cord also.

To fix the issue, I'm hoping I could just buy a new, but different terminal and cord so I don't have this issue again. Ideally I'd like to get a cord like the mac, but I realize that is a long shot. So i'm hoping I can just get a good, solid cord/terminal.

My question(s) is/are can I replace the OEM power cord/terminal with a non OEM? How would I find the watt/amperage my laptop needs?

My laptop = Gateway MC7801u

Thanks guys!
 

A:Laptop power terminal replacement

What has probably happened is the solder connecting the DC in port to the motherboard has cracked. Since it is soldered to the motherboard, to fix it you will need to re-solder the connections or buy a new motherboard. There is no way you could replace it with a mac-style port (magsafe) without some serious modifications to the AC adapter and your laptop.
 

http://www.techspot.com/community/topics/laptop-power-terminal-replacement.159007/
Relevancy 28.38%

Okay, my board is as described. I have a black bank and a blue bank. I plan on upgrading to 8 gigs of RAM this spring. With my motherboard's setup, would I benefit more from 2 sticks of 4 gig RAM or 4 sticks of 2 gig RAM?

A link to my board:
http://www.newegg.com/Product/Produ...8&cm_re=M4A785TD-V_EVO-_-13-131-398-_-Product
 

A:Dual-channel capable board, with 4 DIMM slots in 2 different colors--questions

Link us to your motherboard's website. The manual should contain the correct memory configurations.
 

http://www.techspot.com/community/topics/dual-channel-capable-board-with-4-dimm-slots-in-2-different-colors-questions.158183/
Relevancy 28.38%

Hi Guys

I need to replace the above PSU on a computer I am working on. Its standard ATX - so plenty to choose from - only problem is the mainboard is a good distance away from the PSU - so the cables need to be long .....any ideas of an ATX PSU with long cables ?
 

A:Jeantech JNP - 350P replacement

Corsair's lower end PSUs are a solid choice in my experience. I've used the Corsair CX400 a couple of times in builds and I can highly recommend it.
 

http://www.techspot.com/community/topics/jeantech-jnp-350p-replacement.157559/
Relevancy 28.38%

I had some intermittent shut downs before the power supply finally totally crapped out I have replacement supply start power a after No an HP Pavillion I No start after a power supply replacement first bought a watt supply from Tiger direct but it wouldn t fit in my case BUT I did hook it up and make sure that the computer started up and ran ok It ran fine NOW to replace that the only thing I could find that would fit was a W diablotek My problem is this Now when I hit the power button the power supply fan turns on but nothing else When I turn it off a power surge spins the cooling fan and the cpu fan The side note would be that when I was putting in the power supply the heat sinc was in the way When I pulled it out I didn t realize that the cpu came out with it I jacked up the cpu when reinstalling the sinc I bent some prongs I have replaced it with the identical cpu and still have this problem Any ideas nbsp

A:No start after a power supply replacement

What was your power supply wattage that you replaced? Did you test to see if the Diablotech is functional, i.e. test it with a multimeter?
 

http://www.techspot.com/community/topics/no-start-after-a-power-supply-replacement.158300/
Relevancy 28.81%

So I recently had my main computer crash and break to the point I need a new computer so I figured I'd make it worth it this time.

Here's the deal: (add the www to see it)tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=6327547&SRCCODE=GOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE

Everything on there seems decent but I am curious about the board itself. Would the Intel Desktop Board DP55WB Motherboard be good for gaming, which I wish to use my computer mainly for. I have at most a 700 dollar budget and this seems like a nice deal for it. I plan on putting a Geforce GTX 580 graphics card in it as soon as I get the money as a little side note if it matters.
 

A:Intel desktop board DP55WB motherboard for gaming?

Pyron92 said:





So I recently had my main computer crash and break to the point I need a new computer so I figured I'd make it worth it this time.

Here's the deal: (add the www to see it)tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=6327547&SRCCODE=GOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE

Everything on there seems decent but I am curious about the board itself. Would the Intel Desktop Board DP55WB Motherboard be good for gaming, which I wish to use my computer mainly for. I have at most a 700 dollar budget and this seems like a nice deal for it. I plan on putting a Geforce GTX 580 graphics card in it as soon as I get the money as a little side note if it matters.Click to expand...

I'd suggest looking at the same chipset, but in either Gigabyte or Asus brands. Intel boards are fine, as much as it goes, but the BIOS is very limited as to configuration for different memory, and overclocking options. Intel really markets it's boards as mainstream items, intended for average users and businesses, they're not really aimed at the enthusiast.

The feature set can vary widely from board to board, and you should have a look at these pages to see which board has the capabilities you need;

Asus P-55; http://www.newegg.com/Product/Produ...600008069 600008216&IsNodeId=1&name=Intel P55

Gigabyte P-55; http://www.newegg.com/Product/Produ...600008069 600008216&IsNodeId=1&name=Intel P55
 

http://www.techspot.com/community/topics/intel-desktop-board-dp55wb-motherboard-for-gaming.157197/
Relevancy 28.38%

Hi peeps. just a quick question for my next purchase i hope you can help me out with. RMA's my XFX HD 4850 as it was GSODing ebuyer have offered i can purchase a new card in the price of no more than £145 what is the best card i can get my that money at the moment. i was looking at this > XFX HD 5770 1GB XXX Edition GDDR5 Dual DVI HDMI DisplayPort PCI-E Graphics Card <

But im sure they're are probably better cards out there.

Any suggestions?!

thanks
 

A:Graphics card replacement

But im sure they're are probably better cards out there.Click to expand...

Not at that price point, though if you can find a GTX460...
 

http://www.techspot.com/community/topics/graphics-card-replacement.155011/
Relevancy 28.38%

I m a bit clueless when it comes to networking but here goes Up until a few weeks ago I modem No replacement after sharing file had a happy home network Was running my No file sharing after modem replacement trusty year old Motorola SurfBoard modem into a Linksys wireless router My tower and xbox were wired to the port on the back of the linksys while my laptop wii and ps were all wireless All had connectivity Tower and Laptop could talk to each other and could share files both ways between them then my modem bit the dust Enter the Motorola SBG Mom needed a router for her place and I needed a new modem so I killed birds with one stone and bought it Mom loves her new router and I well sorta like my Motorola Everything has connectivity but my laptop and tower will not talk to each other anymore xbox was also made wireless at this point When I m on my tower and I attempt to browse the quot Map Network Drive quot I can see both computers listed under my home network name When I attempt to click on the laptop to expand it to select the SharedDocs folder I get the following error message quot newlaptop is not accessible You might not have permission to use this network resource Contact the administrator of this server to find out if you have access permissions The network path was not found quot If I attempt the quot Map Network Drive quot from the laptop I get the same message with the exception of the error reflecting my tower name I hope it s something simple like the modem itself is blocking a port or something I ll mention what seems relevant from some other threads I ve tried to understand -both machines are running xp pro sp tower is my own build lappy is AlienWare Area -both machines have file sharing network sharing checked -encryption is set to WPA wireless card can handle it cable SBG gt wireless gt laptop xbox wii ps iphone Tower PC much thanks in advance for any assistance insight i may find nbsp

A:No file sharing after modem replacement

see this thread, post #5
 

http://www.techspot.com/community/topics/no-file-sharing-after-modem-replacement.154509/
Relevancy 29.67%

how do u know if u have on board sound card on ibm
 

A:How do you now if you have on board sound card

The easiest recognition sign would be 3.5mm jack plugs on the rear panel of the motherboard.
http://www.dansdata.com/images/a7a266/sndconns400.jpg
3 (Green, blue, pink) is common on older boards, 4, 5 or more commonly 6 jacks for newer (and 5.1 +) sound codecs.
If you post some details of the system/board the forum will be able to give you a more definitive answer.
 

http://www.techspot.com/community/topics/how-do-you-now-if-you-have-on-board-sound-card.152783/
Relevancy 28.38%

A handicapped friend of ours has an emachine W3503 with a bad motherboard. We are trying to help him get his computer back up and running as inexpensively as possible since he is living on a very low fixed income. Can this be replaced, and if so, what would I order?
Thank you
 

A:Emachine W3503 replacement motherboard?

Probably Not the Answer You Were Hoping For.......

The problem with replacing the motherboard in an Emachine is the extravagant price they will charge you. Also, the power supply is most probably also bad, either by virtue of it killing the board, or being killed by it. I absolutely do not recommend buying a board off Ebay, that's sort of asking to be ripped off.

Here's the specs on your machine http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=W Series&model=W3503

That's pretty much bad news as well, since the Emachine in question has DDR type memory, which would likely have to be replaced with any board you might find today.

The standard treatment for this is to buy a different aftermarket board, and a decent PSU. However, the copy of Windows that came with the machine dies with the board, and would have to be purchased also.

This is representative of a type of board that would fit your chassis; http://www.newegg.com/Product/Produ...rder=BESTMATCH&Description=Intel+G31+&x=0&y=0 and allow you to use your CPU. These boards are about 50 bucks. A replacement Emachine board might be on the order of up to 200 dollars. The upgrade parts I mentioned can be had for about 300 dollars, including the copy of Windows. http://www.newegg.com/Product/Product.aspx?Item=N82E16832116752 This is the OEM version, and you would need to order it with the parts.

As I said, you would also require new memory, a PSU, and a copy of Windows.

PS, The Celeron 356 in that machine is a "Cedar Mill" chip. These were the best single core Celerons (Pentium 4 type architecture) produced. (Until chips based in the new "Core 2 Duo" technology became available). They are however, less than pitiful by contemporary standards. Again, sorry if I ruined your day.
 

http://www.techspot.com/community/topics/emachine-w3503-replacement-motherboard.152514/
Relevancy 29.24%

Wondering if anyone has tried a non-Nocona, E-ATX dual Xeon board in the HAF 932. I'm talking one of the newer Dual-Xeon boards. I know I lose the single-CPU ATX back opening, but I'm more concerned about if it actually handles a dual-Xeon E-ATX board.

Thanks for any help.
 

http://www.techspot.com/community/topics/cooler-master-haf-932-e-atx-dual-xeon-board-anyone-tried-it.152497/
Relevancy 28.38%

I plan to upgrade my video card from geforce 9500GT to geforece GTS250.. my mother board model is gigabyte GA-M61PME-S2P..
 

A:Is the GeForce GTS250 compatible with a DDR2 board and PCIe slot?

Yes.
Powersupply? Just making sure...
 

http://www.techspot.com/community/topics/is-the-geforce-gts250-compatible-with-a-ddr2-board-and-pcie-slot.152306/
Relevancy 28.38%

Hello to all I have an EMACHINE W that is approx years old It started the dreaded shutting off by itself problem last week I bench tested the PSU and the power at the motherboard connection and all was well and within specs While the case eMachines replacement motherboard was opened I noticed that of the capacitors next to the CPU were swollen After researching this on the net I am convinced that the motherboard is probably the culprit I know that it s a eMachines motherboard replacement peice of crap computer but I just want to get another years out of it I am in no way a computer guru and find that I understand hardware more than I do software issues My question is this I would love to replace the motherboard and the PSU to get it up and running but is eMachines motherboard replacement there another motherboard I could use instead of the high priced poor quality one that was installed I am also confused on the software issues involved I have recovery discs I received in the mail last week I had to get these because I couldn t access the recovery partition on the hard drive due to a admin password problem So if I replace the motherboard with another does that mean the recovery discs dont have the OS on them Even though it s a Vista system I have had a Windows XP proffesional disc sitting on my desk for years and never used it My neice purchased it from the college bookstore and never loaded it So all in all I admit the software thing confuses me Any help or guidance would be greatly appreciated I will gladly post system specs if needed I just kept it quot general quot for now since it might be a generic answer The motherboard is a MCP SM-GM Again thanks in advance and God Bless Mike in South Carolina Sorry for the bold caps on title I cant figure out how to change it nbsp

A:eMachines motherboard replacement

Dead and not worth replacing, as the restore disks will likely not work.
The motherboard is a known failure, and is actually a 6 year oild board.
ASRock boards are low cost and work, as are many others from the online stores... but you also have to get the right CPU, CPU cooler, power supply, memory, for that board, and make the external plugs fit the case.
You can look at the motherboard specs on line at Directron.com, Newegg.com, Frys.com, PCMall.com, CDW.com, ZipZoomFly.com, and many others... and you will immediately see how complex the order is in matching up everything.
You are probably best off asking a local guru, High School or College Kid with a high interest in computers. Give it to them for a couple of weeks, and let them get it right for you.
The hard drive, memory, and optical drive are still good... but matching them up takes some work, and we would have to see the board setup and CPU to be sure.
 

http://www.techspot.com/community/topics/emachines-motherboard-replacement.150587/
Relevancy 30.1%

I want to put together two of the new GTX 460 video cards and using an i7-870 proc.

Any SLI mobo recommendations?
 

A:SLI board recommendations for the GTX 460 and i7-870

Hi Tom,
what price range are you in here?
......Hmmmmm, something tells me Chef will be here in a minute with 3....no...make that 4 recommendations.
 

http://www.techspot.com/community/topics/sli-board-recommendations-for-the-gtx-460-and-i7-870.150526/
Relevancy 28.81%

Hi

I want to turn on my PC automatically during late hours so that I can do some downloads and maintenance works on my PC automatically!!
But I cant find an option for RTC alarm enabling in this BIOS!!
Whats wrong with this Mobo?

Will any one help me?
 

http://www.techspot.com/community/topics/how-to-enable-rtc-alarm-on-my-intel-desktop-board-d102ggc2.150251/
Relevancy 27.95%

I am planning to buy a new laptop this weekend and I want a desktop replacement - just tired of small screens and low performance and unfortunately I simply do not have a desk to put a high-end desktop If I was to buy a desktop it would certainly be equipped with a Core i - GHz processor While I cannot replicate such power in a notebook I am trapped in a dilemma of choosing between four cores or a high clock speed In a desktop it seems to me that such dilemma does not exist since the processors can use more power and have higher clock speeds it would be worth more to have a GHz or a GHz four-core than a GHz or a GHz dual-core But in laptops it s a completely different story The contenders are basically the Core i - m and the Core i - QM or the i - QM and the runner-up is the Core i - QM and i - QM if it is really worth it I have done extensive research on the Internet The sources are not many but it led to to some conclusions The Core i - QM GHz has cores and threads but a low clock speed GHz that can be increased up to GHz with all cores operating It can go as high as GHz with only two cores The Core i - M on the other hand has a clock speed of GHz which can be increased up to GHz with Turbo Boost using all cores Theoretically the i - QM would be a superior processor Intel has put a higher number to identify it instead of duh Four cores operating at GHz equals to GHz in the case of i - QM while two cores operating at GHz equals to only GHz in the case of M with Turbo Boost the i - QM would sum it up quad core? Desktop replacement: dual or to GHz and the i - M to GHz - still a big gap in performance In addition the i - Desktop replacement: dual or quad core? QM has MB L cache while the i - M has MB But that s just theory In real life things are a little bit different I do have a Core Duo right now and I see Windows making Desktop replacement: dual or quad core? extensive use of the two cores However I suspect that even the most advanced software are not optimized for multi-core and multi-threading processing A clock speed of GHz could be a disadvantage in this scenario especially comparing to the much higher clock speed of the i - M The i - M has a clock speed which may be GHz higher than Desktop replacement: dual or quad core? the Core i - QM and that seems to me a big difference I ve read that the i - M would be better for single-threaded or lightly multi-threaded applications due to its higher clock speed Some sources say that the i - QM would be the better choice for heavily multi-threaded apps while others say that due to the huge difference in clock speed the i - M would be the winner even in those cases There are other factors which must be taken into consideration of course The i - QM has MB of L cache while the i - M has only MB and that makes a difference - however I do not know whether this additional MB make it up for the huge gap in clock speed The i - QM also supports MHz memory while the i - M supports only MHz memory and I do not know how this will affect the performance - some sources even say this is irrelevant The i - M is a nm W processor and consumes less power than the nm W i - QM It means less heat and more battery life of course But in terms of performance less heat and less power consumption could mean that the i - M could achieve its top Turbo Boost performance more easily than the i - QM As a result it would be more likely for the less-power hungry i - M to achieve the GHz Turbo Boost performance than the i - QM to achieve the GHz I ve seem some benchmarks on the Internet In Passmark Software s website the Core i - QM scores higher than the i - M but I am afraid these numbers reflect a theoretical performance that nobody will ever get to achieve in day-to-day situations Notebookcheck has done some comparison too and it ranks the i - M in a higher position than the i - QM The i - QM scored higher than the i - M in most tests but Notebookcheck thought the i - M would be a superior processor - perhaps i... Read more

http://www.techspot.com/community/topics/desktop-replacement-dual-or-quad-core.149725/
Relevancy 27.95%

Hello Hopefully someone could help me out with this I Black card video screen following replacement ve been pulling my hair out on a daily basis troubleshooting this issue The other day I was cleaning my room listening to Pandora on my PC From what I could remember Pandora was the only application I had open at the time All of a sudden my computer flips out and the song that was playing started skipping rapidly and my computer screen went blank Since I couldnt see the screen I had to do a hard reboot I restarted my system and it came back up asking me to Black screen following video card replacement start normally or in safe mode I started normally thinking it wasnt as bad as it really is It came to the log in screen and I entered my credentials The system came up but only one of two monitors I have dual monitors set up one Dell Monitor and one LCD TV turned on Then about minutes later it did the same thing the screen went black and I was not able to do anything at Black screen following video card replacement that time I restarted my system again and this time I started in safe mode minutes later same thing I opened my computer to clean it out and noticed how dusty it was in there I aired out all the dust I looked at the fan on my video card and it looked really dusty like the fan was too dusty to even move I took the video card out and noticed that some of the cylinoides on it were popped like it got too hot So I figured that the video card was done I went out and purchased another one a GeForce GTS GB BIT DDR PCI Expressx I installed it and now I cant even get the system to boot up All the fans go on there is still an amber light coming from my motherboard like it always has But I get a black screen nothing comes up at all I dont even know if my motherboard recognizes the new card because my monitor wont even pick up a signal when I turn on the PC the light on the monitor stays amber like their is no communication to the video card I m thinking the PC doesnt recognize the new card because I havent installed the new drivers for it yet But since I cant see the screen I cant even install the drivers The worst thing is that I DO NOT have an on-board monitor hook up to my motherboard My motherboard is an MSI P N SLI Platinum I tried pulling the card out and putting the old one back in to see if maybe I could get one more life out of it just so I could go in long enough to install the new drivers But my PC did the same thing as when I put the new card in The weird thing is that the fan that is on the card turns on the new one and the old one but there is still no connectivity going to my monitor screen is still black I dont know what to do next anyone have any suggestions I would really appreciate it Thanks in advance nbsp

A:Black screen following video card replacement

Does the problem also exist in SAFE MODE?
We really need to know brand and model of computer, or configuration, and age of components to start making many suggestions.

I would want to remove every component possible, and be running some simple stuff... keeping very good notes of what attempts you have made.
 

http://www.techspot.com/community/topics/black-screen-following-video-card-replacement.148440/
Relevancy 27.95%

I bought a refurbished motherboard and after the install it has power, but displays no video and an external monitor does not work either.

I noticed that where the lcd plugs in on the motherboard one pin was bent over touching the other.

I straightened the pin out and re plugged it in.

Is it possible that with the pin touching the other pin on the board that it fried something or is that not possible?

I was trying to help a friend and I have bite off more than I can chew here.

Or is it that I do not have a compatible board?

I have checked all the connections ribbons etc and nothing seems to be out of place

Any thoughts or suggestions outside of don't bite off more than i can chew next time?
 

A:Toshiba a105 s4284 motherboard replacement

Laptop motherboard replacement takes considerable skill and patience. Have you worked on laptop computers before? Where did you buy the "refurbished" motherboard? You were lucky that the LCD panel connector pin didn't break off. Did you take great care in placing the CPU onto the "new" motherboard and did you apply new clean thermal grease to the CPU and it's heatsink? If you can give us the motherboard part number we can verify that it is the correct part for your model laptop
 

http://www.techspot.com/community/topics/toshiba-a105-s4284-motherboard-replacement.148424/
Relevancy 28.38%

Hi all

I have a customer who has a Sony all in one and her hard drive is faulty and needs replacing.
I just wondered if anyone has replaced one and knows the best to get to the HD, the vibe I am getting is that it might be a return to Sony job

Thanks in advance
John
 

A:Sony VGC-LT15E all-in-one HD replacement

Download the shop manual from Sony... It is do-able if you have patience, and the right tools.
 

http://www.techspot.com/community/topics/sony-vgc-lt15e-all-in-one-hd-replacement.147928/
Relevancy 29.67%

Hi I have been having problems with my hdd s circuit board on my dell d I aint sure what happen I think it Toshiba circuit HDD board was just my bad luck Anyways I was wondering if its possible of saving the HDD by switching the board with one of the same model boughten brand new off the internet Also I forgot to mention that I put a master password Bios password also applied but thats not a problem since I am able to enter my password on the hdd so no could get into it without my consent just in case it got stolen I am just wondering if that will screw anything up with the new circuit board The name and model of the hdd is Toshiba Toshiba HDD circuit board MK GAX I hope someone can give Toshiba HDD circuit board me some advice on this topic because I don t want to wast my money which ever way I go buy a new hdd or just a circuit board Please respond and thanks in advance nbsp

A:Toshiba HDD circuit board

Come on people, just don't let me hang. I need something, thoughts, ideas, and/or anything else. I just don't want to leave with nothing...
 

http://www.techspot.com/community/topics/toshiba-hdd-circuit-board.147872/
Relevancy 27.95%

Ok so had a this machine for months and suddenly had issues with the OS on attempting to reinstall it as a fresh install it was refusing to write to the hardrive display Replacement (other issues, help) no topics motherboard, so I figured the hard drive had died Purchased new HD and encountered same issue So i figured i had a problem with the sata ports on the Motherboard Bought replacement Mother board and Installed barebones CPU fan RAM and HD using on board video Now monitor does not power up so i Replacement motherboard, display issues, (other topics no help) am unsure if i Replacement motherboard, display issues, (other topics no help) am getting into BIOS Setup Intel quad core Kingston branded RAM Original motherboard Biostar G upgraded to Biostar G Gt PCI-E video card I have replaced the motherboard and installed just the CPU fan RAM and internal speaker When starting with RAM out i get an intermitant beep which suggested it is getting to the BIOS I have tried using the on board video on the motherboard and also with the PCI video installed both give no response to the monitor The monitor works on other PCs I get no lights flashing on the keyboard ps when starting up if it is plugged in I have made sure there is no standoffs touching the bottom of the new motherboard I have removed the battery from the motherboard with Power Dissconnected and reset the CMOS jumper making sure i wait for about minutes each time Any thoughts on other possibilities I think there is a chance it could be the power supply or possibly even a dead processor I would like to try to eliminate all other options before i spend more money that i might not need to Thanks Graeme nbsp

A:Replacement motherboard, display issues, (other topics no help)

...and suddenly had issues with the OS...Click to expand...

What were the original issues with the OS that caused you to try reinstalling the OS in the first place?
 

http://www.techspot.com/community/topics/replacement-motherboard-display-issues-other-topics-no-help.147627/
Relevancy 28.38%

Hi;
My Canon 8400F is acting like the lamp is going bad.
It works for a while when first powered on, then I get the "waiting for lamp to adjust" message and it just sits there.
I can see that the lamp is lit, but maybe it's not bright enough?

If I shut the scanner off, then turn it back on a minute later, I can get it to work for a few more scans until the lamp message comes up and won't go away.

I have noticed for the past year that I have to wait a bit longer for the lamp to adjust, so I do suspect the problem is the lamp.

Is this something I could buy, for less money than a new scanner? I know how inexpensive scanners are these days, so maybe it's not worth the trouble.

Thanks

FW
 

A:Replacement lamp for scanner?

I'm sure you can, provided you know how to remove the old bulb so you can get the bulb number from it. If you go to a place such as: http://www.bulbdirect.com/, I'm sure they have what you need. If you can't figure out the bulb number, you can always contact Canon for a replacement.

When replacing this kind of high intensity bulb, don't touch it with your bare fingers. You want to avoid getting any oils from your hand on it.
 

http://www.techspot.com/community/topics/replacement-lamp-for-scanner.147320/
Relevancy 29.67%

I will be upgrading my system in july and was wondering if anyone can recomend a new cpu, motherboard and DDR3 sims. I currently have an E8500, ASUS P5N-32E, GTX275, Corsair TX650 PSU and 4gig of DDR2. I was thinking of going with the an Intel Core i7 930 2.80Ghz (Bloomfield) (Socket LGA1366). Can anyone recomend a good board around £150-180 that will fit this CPU and also some DDR3 sims?
 

A:New CPU, board and memory time

The Asus P6X58D-E is a great motherboard at your price point.

Are you planning on going with 6GB of DDR3 memory to utilise the CPU's triple channel memory controller? What's your budget for the memory?
 

http://www.techspot.com/community/topics/new-cpu-board-and-memory-time.147034/
Relevancy 28.38%

Hi recently i posted in this forum that my PSU blew up from the responses i got here apparently my suggestions motherboard Replacement mobo got fried as well http www techspot com vb topic html now i am on a VERY tight budget and i can Replacement motherboard suggestions t afford to get new processor gpu etc i can only replace my psu and my mobo so i have a Radeon HD x DDR gb ram and a AMD athlon processor what mobo can i get which is the equivalent or better than my old mobo Asus M N -SLI that can support everything that i already have and also a similar PSU Also someone Replacement motherboard suggestions told me in this forum that the only way i can check if my HD and other stuff got burned is by testing them on another machine but is it possible in Replacement motherboard suggestions any way to check it without another pc i dont have any money to spend right now and i need to check if it s that i won t have to replace anything else on my pc Thanks guys my pc is burned for weeks now and i work with my pc so two weeks without working i am desperate nbsp

A:Replacement motherboard suggestions

What is your budget?

This seems like a very decent motherboard and should suit your needs.

As for your HDD, you will need a working computer to test it.
 

http://www.techspot.com/community/topics/replacement-motherboard-suggestions.146393/
Relevancy 27.95%

My CPU cooler just died so I m looking for a new one the one I had came with the CPU when I bought it It s an AMD Athlon X Dual-Core Processor Socket AM I seem to have trouble finding a doable cooler though mostly because I don t know enough about the subject I think but there doesn t seem to be a lot of coolers out there anymore for AM either So far the closest thing to something useful I ve been able AM2 for Athlon replacement socket a a Need cooler help AMD 64 finding X2, to find was MASSCOOL F B H mm Ball CPU Cooler - Retail Specifications Dimensions Heat sink x x mm l x w x h VDC Fan x x mm Bearing Ball bearing Rated speed RPM - Rated power Need help finding a replacement cooler for a AMD Athlon 64 X2, socket AM2 W Max Noise level dBA Max Need help finding a replacement cooler for a AMD Athlon 64 X2, socket AM2 Air flow CFM Current A Max Connector Pin mainboard Life hours hours Application AMD Socket AM and AM CPU AMD Athlon AMD Athlon FX AMD Athlon X Dual Core Business Class-AMD Athlon Business Class-AMD Athlon X Dual-Core AMD Phenom X Quad-Core AMD Sempron AMD Opteron CPU TDP lt W Thermal resistance C W Thermal type White grease pre-applied Another website mentions AMD Socket AM Athlon X Dual Core under this coolers compatibility Do you think I can use this fan or should I look for something else and in that case does anyone have any suggestions nbsp

A:Need help finding a replacement cooler for a AMD Athlon 64 X2, socket AM2

There are quite a few AM2 HSFs still available. But you must specify your budget and also determine whether your case will house those that are available.

Check out this page.
 

http://www.techspot.com/community/topics/need-help-finding-a-replacement-cooler-for-a-amd-athlon-64-x2-socket-am2.144865/
Relevancy 30.1%

Hey everyone!

I know this might not be possible but I'm wondering if you can uses two SLI cards, but use the on board port to push the output video. I have two 9800 GT cards with dual DVI connections. The motherboard has a HDMI output and I would like to hook this pc to my HDTV. I can hook the the on board port just fine but the system doesn't use the graphic cards at all. Is their a way to make the graphics cards work when their ports are not in use? Thanks in advance!

Specs
2 X 9800 GT
1220 modular power supply
Dual core AMD 3.2 GHz
2 X 500 GB hardddrive
4 GB of RAM
 

A:On board plus two SLI cards

obviously it wouldn't work. you cannot expect the graphic card to output the display to onboard HDMI port right? it's time for DVI to HDMI converter.
 

http://www.techspot.com/community/topics/on-board-plus-two-sli-cards.144412/
Relevancy 28.81%

Hey all, New to the forum. Happy to be amongst you. I have a eMachine T234 for my daughter and it keeps shutting down.

I've read a lot here & done all the checks. Also replaced the PSU with a Dynex 400w, upgraded with a 500g HD and installed a clean copy of the OS. Vista Home 32bit.

I cleaned all fans checked temps and it still does the same. After reading all the other posts about emachines I am confident that it is crap also. But, this is my daughters and I want to fix it for her.

What motherboard can I replace the old one with that is comp/w the Athalon AMD 64 and any other saved parts? Any help is appreciated. Thanks, Mike
 

A:MoBo Replacement?

Hi,
I have zero knowledge of eMachines so here goes.
Is the system actually a T2341 ? If so then...
Is this your board ?
If it is then your part number for a direct replacement is MBEM2124L7V2 (or LV7MM2)
According to my search it's an AMD Socket A (462 pin) motherboard of mATX (micro ATX) form factor.
I don't know where you're based- I assume from your username you're from the U.S.- so I'd check eBay and other online auctions first before trying etailers/retailers - the part is fairly old and buying new will most likely be costly.
A quick search of Socket A mATX boards brings up:
ASRock K7VM3
Foxconn K7S741GXMG-6L , the site linked also carried a number of DFI boards

Welcome to Techspot !
 

http://www.techspot.com/community/topics/mobo-replacement.144109/
Relevancy 28.81%

How do i fix or enable my system board Dell Latitude C640 on my laptop ?? Question US Marine in Iraq needs help azap!!!!!!!Sempre Fi USMC
 

A:How do I fix or enable my system board on my Dell Latitude C640?

You'll have to explain what is "system board" and what exact problems you're having.
 

http://www.techspot.com/community/topics/how-do-i-fix-or-enable-my-system-board-on-my-dell-latitude-c640.143065/
Relevancy 28.38%

Hey guys Motherboard questions replacement Gateway Rig CPU AMD Athlon X Motherboard Foxconn C GU Motherboard Ram Speed size and sticks MB DDR Dual Channel sticks two dead either actual ram or motherboard error not sure GPU BFG NVIDIA GeForce GT OC MB PCIe PSU PC Power amp Cooling watt brand New OS Microsoft Windows XP This is my current computer The motherboard on my computer is acting kinda crazy so i need to replace it I was wondering If i can replace it with an AM AM motherboard such that i can use my current processor and eventually buy a phenom II or something Motherboard replacement questions along those lines Do these AM AM motherboard work well with either processor or is there a catch to them I realize that then I would need to buy new RAM most likely But would i have to for example reinstall the OS or is that something that doesn t matter if i just switch the motherboard Also I was wondering Motherboard replacement questions how standard the cooling unit screw are on the motherboard To see if I could also skip from buying one Motherboard replacement questions of those Also while I m at it would you buy one GB stick of memory or two GB Or is the processor too much of a bottleneck Either way I was intending to buy the phenom II processor in like a year or two Thx for the help nbsp

A:Motherboard replacement questions

if you get an AM2/AM3 motherboard you wont be able to use your CPU. and yes you will need to reinstall your OS when replacing the motherboard.

Motherboard GIGABYTE GA-MA78LM-S2H $59.99
CPU AMD Athlon II X2 240 Regor 2.8GHz $56.99
RAM G.SKILL 4GB (2 x 2GB) DDR2 800 (PC2 6400) $84.99
Subtotal: $201.97

if this over your budget let me know
 

http://www.techspot.com/community/topics/motherboard-replacement-questions.143401/
Relevancy 56.33%

Hello all I m new here almost as new at poking around inside my computer at this point its nothing lost nothing gained I have read several hundred posts of others who also fell victim to these substandard machines An e machines label wont be on my desktop again even if its case is blotted out with whiteout Anyway enough rant I m here for your help I have an model T amd athlon failed board victim Unknowing emachine, 754/478 socket replacement, of power supply that took the motherboard with it originally a - bit Unknowing victim of emachine, board replacement, socket 754/478 Mhz gb x machine msi MotherBoard I have looked at options and due to purpose or use of it I remain torn as to the best way to replace it seems Unknowing victim of emachine, board replacement, socket 754/478 Cputopia com On Sale has a motherboard basic single core board processor and processor fan for a Unknowing victim of emachine, board replacement, socket 754/478 bit over a hundred dollars dependent on options selected they also have a box case processor board and power supply for around dependent upon how equipped while the power supply upgrade is at one page its at another No big deal about that Anyway my other option is to get a sole independent board with the same socket as my oem processor motherboard and reuse my Atlon Processor - HD - DVD-Cd and new windows program as such Now the crux of the problem is I have seen T quot s listed here and elsewhere as having come from the factory equipped as socket and processor as well as How do I know or how can I tell which one I have I need to compare performance of the T - socket to the Sempron quot its been suggested this Sempron also comes in a variety of speeds and cores some better some worse than the Atlon it is dependent on the encoded processor suffix quot No description of such is available with the advertised replacement board and case at cputopia and I certainly don t want to go down or backward in speed or performance There are no performance specs advertised with this Cputopia com replacement board case cpu fan or other optional parts available either essentially no sepec no matter what I buy of the sempron All replys will be appreciated my budget doesnt give me room for errors do it once and do it right the first time wish I had been this cautious when I bought the emachine but budget was not as bad as now come Halloween I m gonna put lipstick on it put it outside and call it a pig with a big emachine billboard Regards to all here Leo nbsp

A:Unknowing victim of emachine, board replacement, socket 754/478

Dude, get a grip. I know less about computers now than before I read your post.

I thought that socket 478 was Intel (Pentium Celeron), now I come to find out that it's AMD.

An AMD Sempron 3000 only comes in one speed, if it's another speed, then it has a different number.

All of the s*** you mention is beyond obsolete, so maybe it's time for a whole 'nuther computer. Please, I heartily suggest that you avoid attempting to build a machine, at least in your current state of mind.

I don't think that any of us here are really equipped to deal with the anxiety, angst, or incoherent and rambling thought patterns you have exhibited thus far, let alone what you're trying to pass off as sentence structure.

BTW, my Emachines T-5026 just reached its 5th birthday. If you'd like to check in and wish it many happy returns, (pun not intended), here's the link; http://www.techspot.com/vb/topic143315.html

I would argue that it is not really possible to be an "unknowing victim" of Emachines.

You bought it because it was cheap, cheap s*** breaks. So where's the surprise, the mystery, or the unpredictability?
 

http://www.techspot.com/community/topics/unknowing-victim-of-emachine-board-replacement-socket-754-478.143436/
Relevancy 29.67%

I've got an old ECS Elitegroup PF21 extreme motherboard. Now ever since I reformatted I have had no sound from my on board audio. The only way I have been able to was through my USB headset. I've never formatted a computer and it was my first time. Everything works perfectly fine and I have no problems other then this. Does any one know what could have gone wrong?
 

A:On board audio not working

Download the drivers from the motherboard's support site here
 

http://www.techspot.com/community/topics/on-board-audio-not-working.143323/
Relevancy 55.47%

The mother board is an ASUS P5Q? I know the adapter is working because I can hook the cable that comes from the case to another sata slot shut down turn the enclosure on and boot and I have a third hard drive. But that is not how I would like to do it. If the mother board would recognize the enclosure it would give me an icon in the tray to shut it off and I would not have to reboot to back up something.


Thank u for any help
 

http://www.techspot.com/community/topics/how-do-i-get-this-mother-board-to-reconginse-an-e-sata-to-sata-adapter.142200/