Windows Support Forum

mother board fried

Q: mother board fried

I inadvertantly fried my motherboard by plugging a usb device into a usb port upside down. (the little white piece had fallen out of the usb port which allows usb cables to plugged in only one way). My question is - if a motherboard shorts out does that mean that my processor, sound card, etc are also toast? I will replace just the motherboard if that is all that is bad, but if I have to replace the processor, sound card, etc then I might as well buy a new pc. Is there any way to test the processors and sound cards to see if they still work? Thanks for your help in advance.
Ray

Relevancy 100%
Preferred Solution: mother board fried

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 30.53%

Hi techspotters it has come time to modify my old rig I m planning to upgrade the cpu without changing my motherboard but there is a slight risk involved that the purchase I am going to make is with CPU board AM3+ AM3 faul So back to basics My current MB M A TD PRO AM3 board with AM3+ CPU USB - link Current CPU Phenom t oc running ghz Current RAM EVOleggera x running underclocked mhz the one to upgrade to AMD FX -- So this is a basic operation a cpu swap but few questions popped up on the research phase M A TD is a AM board which apparently after some searching supports some of the FX series cpus that are AM I have also found the corresponding BIOS that I need to flash myself to to make it work properly and be recognized by the MB link Q amp A FX is known to support mhz RAM speeds my existing RAM runs max at without overclock and is placed x which occupies all slots and might confuse the FX which supports dualchannel as usual Meaning I will need to leave my RAM running at mhz how big will the reduce be in the performance of the CPU- mhz vs When setting up the proceccor I will need to disable the Turbocore to make it stable on the older AM board which only supports cpu speeds up to ghz and the fx on turbo bumps to ghz After disabling turbo all cores are set to run at which by research is the most stable option on my existing MB Will FX bottleneck gtx or gtx and how bad it is going to be Upgrading hardware is always nice but am I making bold move by upgrading a year old cpu to almost as old one And if someone with more knowledge can state me that there is no performance gain to be maid I just might stick with my old as long as its still breathing and calculating Thanks in advance for replys And no changing an motherboard is not an option So fond of my old rig best regards m nbsp

http://www.techspot.com/community/topics/am3-board-with-am3-cpu.214400/
Relevancy 29.24%

Evening, all

I bought an interesting little Single Board Computer as an mITX motherboard (a WADE-8020, more info at the link below):

http://www.ebay.co.uk/itm/Portwell-...766?pt=LH_DefaultDomain_0&hash=item3a9b75151e

I have another similar board in an old Hoojum Cubit 3 case, and was wondering if anyone might have any other suggestions for a similarly eye-catching case, probably ready-made, though I'm not averse to either buying a DIYed case, or maybe trying to make one myself (I have a Dremel but not much else, and that includes skill )

Cheers, Jon.
 

http://www.techspot.com/community/topics/case-suggestions-for-industrial-mitx-board.213745/
Relevancy 29.67%

Hey all,

On my studio pc, I've installed a new rack mounted firewire audio interface in the studio. On the other drives (windows 8.1) the interface has installed perfectly but on the xp drive, although the drivers etc have been installed, once set, it works perfectly with the new outboard soundcard.

However, whenever I reboot to the xp drive, xp always reverts back to the on-board realtek sound card. I set the default to the new interface (a Presonus Firestudio Project) but every reboot it defaults to the realtek.

The motherboard is a P5N-E SLI if that helps.

How can I stop this happening so the new interface is the default?

Thanks in advance,

Paul
 

http://www.techspot.com/community/topics/xp-reverts-to-on-board-sound.208179/
Relevancy 28.38%

So heres the story The computer has been working fine for several years Last night I decide to D850MV/D850EMV2 long Three desktop board beeps on Intel plug in my tv to the desktop via dvi It Three long beeps on Intel desktop board D850MV/D850EMV2 works fine and I dont have any problems I get home today and try and turn the computer Three long beeps on Intel desktop board D850MV/D850EMV2 on and I dont get any video signal to either the tv or the normal monitor Also long beeps accompany start up it sounds as though things boot but I dont get video or sound but it sounds like the hard drives click now and then like normal and the fans all run fine Ive swapped the first ram stick with one other and havent tried the rest yet and I have not changed the video card yet but plan to in the next minutes as of writing this Nothing looks physically damaged and I dont have any extra ram for this computer laying about since its a rambus so all I can do is swap the ram thats in it around and because I cant get video I cant run a test on the ram Suggestions or help would be appreciated Specifically what the long beep codes mean ive Three long beeps on Intel desktop board D850MV/D850EMV2 found a couple different versions of the code online and not sure which is correct Also what might have caused the problem plugging the tv in thats the only thing I did different unless someone was messing around with it without my knowledge or could it just be from years of wear or what nbsp

A:Three long beeps on Intel desktop board D850MV/D850EMV2

I think three beeps on Intel is a memory issue. At least that what it was when I had a stick of cheap RAM crap out on me.

I'd run Memtest and go from there

RAM can fail from a number of causes. Heat exposure, flaky transistor junctions, who knows. I seriously doubt plugging the TV in had anything to do with it.
You could go into BIOS to ascertain if the RAM voltage is set correctly. Over-volting is a DIMM killer.

You should be able to get documentation for that board directly off Intel's web site. Intel used to give BIOS beep codes ion the board/chipset manuals.

They also have hardware monitor software as a free download. Look up "Intel Desktop Utilities Lite".
 

http://www.techspot.com/community/topics/three-long-beeps-on-intel-desktop-board-d850mv-d850emv2.191367/
Relevancy 63.64%

This is my Entire system spec Im looking to upgrade my processor but I need help Operating System System Model Windows Home Premium x Service Pack build Install Language English United States System Locale English United States Installed AM Boot Mode BIOS Secure Boot not supported eMachines ET G System Serial Number PTNBA Enclosure Type Desktop Processor a Main Circuit Board b gigahertz AMD Athlon II X u kilobyte primary memory cache kilobyte secondary memory cache -bit ready Multi-core total Not hyper-threaded Board eMachines MCP PM-GM Bus Clock megahertz BIOS AMI P -A Drives Memory Modules c d Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space HL-DT-ST DVDRAM GH N SCSI im with AMD is board? to my What Processor mother compatible this And new CdRom Device Optical drive WD Virtual CD USB Device Optical drive Generic- Compact Flash USB Device Hard drive -- drive Generic- MS MS-Pro HG USB Device Hard drive -- drive What AMD Processor is compatible with my mother board? And im new to this Generic- SD MMC USB Device Hard drive -- drive Generic- SD MMC MS What AMD Processor is compatible with my mother board? And im new to this MSPRO USB Device Hard drive -- drive Generic- SM xD-Picture USB Device Hard drive -- drive WD My Book USB Device Hard drive GB -- drive s n WMAVY WDC WD AAKX- CA SCSI Disk Device GB -- drive s n WD-WMAYUL SMART Status Healthy Megabytes Usable Installed Memory Slot DIMM has MB serial number DE B Slot DIMM has MB serial number D B Slot DIMM is Empty Slot DIMM is Empty Local Drive Volumes c NTFS on drive GB GB free k FAT on drive GB GB free Operating System is installed on c Network Drives None discovered Users mouse over user name for details Printers local user accountslast logon Quentin PM admin UpdatusUser AM local system accounts Administrator AM admin Guest PM HomeGroupUser never Marks a disabled account Marks a locked account HP LaserJet Professional P w on IP Microsoft Shared Fax Driver on SHRFAX Microsoft XPS Document Writer on XPSPort Controllers Display ATA Channel Controller ATA Channel Controller NVIDIA nForce Serial ATA Controller x Standard Dual Channel PCI IDE Controller What AMD Processor is compatible with my mother board? And im new to this NVIDIA GeForce GTS Display adapter DELL WFP Monitor quot vis s n XX- JU -XXXXX- - S June Bus Adapters Multimedia Standard Enhanced PCI to USB Host Controller Standard OpenHCD USB Host Controller HP Webcam HD- Mobiola Wave Audio Device WDM Mobiola Web Camera Video Source NVIDIA Virtual Audio Device Wave Extensible WDM Realtek High Definition Audio Senstic PocketAudio Senstic PocketCam USB Audio Device Virus Protection Back to Top Group Policies No details available None discovered Communications Other Devices Hamachi Network Interface primary Auto IP Address Gateway Dhcp Server Physical Address A D Connection Speed Mbps Microsoft to Adapter Microsoft ISATAP Adapter NVIDIA nForce Mbps Ethernet Auto IP Address Gateway Dhcp Server Physical Address FC C AA Connection Speed Mbps Teredo Tunneling Pseudo-Interface Networking Dns Servers HID-compliant consumer control device x HID-compliant device x USB Input Device x HP Webcam HD- HID Keyboard Device x HID-compliant mouse Microsoft PS Mouse USB Composite Device x USB Mass Storage Device x USB Root Hub x Generic volume shadow copy WD SES Device E F G H I nbsp

A:What AMD Processor is compatible with my mother board? And im new to this

That is an AM3 socket CPU which means it should be compatible with the Phenom II series CPU's. I looked up the board and it should still support up to a 95 watt CPU so any Phenom II X4 CPU with a 95 watt TDP would work on it.

Like This
http://www.amazon.com/AMD-Phenom-Socket-Quad-Core-Processor/dp/B002XNBQJQ
 

http://www.techspot.com/community/topics/what-amd-processor-is-compatible-with-my-mother-board-and-im-new-to-this.202437/
Relevancy 34.83%

Hey guys. So, a client says she was on her laptop (Asus M50V) and she smelled burning plastic, then she noticed a small flame in the back of the laptop. The flame was put out. She was able to run the computer again, but it would only run on the battery. It will not boot up when plugged in. I want to take it apart to see if there is something that can be replaced.

Do you think it would be worth taking apart, and do you know if the part that could be damaged would be replaceable? I'm guessing there was a power surge, because there was a storm that night, and she was not on a surge protector. It looks like the laptop is still functional, it just won't boot from power anymore. Any thoughts?

Thank you!
 

A:(Partially) fried laptop

Yes you should be able to replace the part/parts that caught fire.

Replacement parts can usually be found on the manufacturers website if the laptop is still being supported. I took a very quick look for replacements parts on the ASUS site and found nothing other than a replacement keyboard.

You'll probably be able to find used parts on ebay. You'll need to compare part numbers to be sure you're getting the right part.
 

http://www.techspot.com/community/topics/partially-fried-laptop.176335/
Relevancy 29.67%

Hello,
As the topic says, my computer doesn't detect my on-board sound card. It all started when I tried to install new audio drivers from manufacturers page, but the next day when I booted PC up there were no sound. In Device Manager, under Sounds, game,.. controllers tab sit 4-5 High Definition Audio Devices. Here's pic:


Then tried re-installing original audio drivers from motherboard CD, enabling/disabling On-Board HD Audio in BIOS but still no luck.

My Audio Device is VIA VT1705.
DxDiag shows that no sound card was found.

This is what is shown in Playback Devices tab:

But I have no HDMI kind audio devices..

How to make my system recognize my sound card?
 

http://www.techspot.com/community/topics/on-board-sound-card-is-not-recognized.202272/
Relevancy 29.67%

After my brother sprayed it with glass cleaner.my laptop key board types wrong letters.lets say I want to write "my laptop key board is messed up" this is what it types: my lap0to9p0 ke3ybo9ar4d i8s me3sse3d u7p0. all the letters in the upper row type the letter and the number above it and vise verse(exept t,y,5,6)
I tried the num lock and sticky keys,checked my language tap still nothing
(I use dell inspirion , windows 7)
Plz help.
thanks
 

A:My laptop key board is messed up

Have you tried a USB keyboard? If not, try it. You might also try the on screen keyboard.
 

http://www.techspot.com/community/topics/my-laptop-key-board-is-messed-up.196547/
Relevancy 29.67%

I just came from a retail store to check on prices but most of their parts weren't available anymore. Instead of a G. Skill Ripjaws 2x4 8gb DDR-3 1600, the clerk offered me a Crucial Ballistix 2x4 8gb DDR-3 1866 memory. The board I'm gonna buy is an Asrock H77 Pro4/Mvp but looking at their memory support list http://www.asrock.com/mb/memory.asp?Model=H77 Pro4/MVP, it doesn't seem compatible.

The clerk had told me it was compatible and that he had tried it before but I'm not sure if it'd have unwanted effects over some period of time. (I got drawn in by how the memory looks and its LED so I'm including it as a choice). Thanks.
 

A:Is a 1866 memory compatible with an H77 board?

It will be compatible, worst case scenario is just setting your 1866Mhz RAM to run at 1600Mhz. You're getting quicker RAM for free.
 

http://www.techspot.com/community/topics/is-a-1866-memory-compatible-with-an-h77-board.194307/
Relevancy 33.11%

Late night I was in bed then I shock Static button... mobo case power fried? remembered that I needed to pay a bill that was due the next day So I jump out of bed and right to my PC I reach for the power Static shock case power button... mobo fried? button with my static charged finger unawares and get a shocking surprise I didnt actually press the button but the PC fired up anyway only to power down seconds later So I ground myself too late and press the power button Nothing no response Next I open the case and press the power button on the mobo no response The power and reset button on the mobo are lit up btw So then I unplug my power cord from the psu wait for the pc to drain completely then plug the cord back in Right when I plug the power cord back in the pc fires up then dies seconds later I ve tried -shorting out the battery -resetting cmos -screwdriver to the case power pin -bench test All with the same result Heres my hardware CASE Thermaltake MK-I Chaser CPU Intel Core i k GHz GPU EVGA GeForce GTX GB MOBO Asus P Z V PRO GEN MEM Corsair Vengeance GB DDR - x SSD Crucial M GB HDD Western Digital Caviar Black TB Windows Home Dont know what to do next I bought everything in February of so everything should be under warranty if qualified Thanks in advance nbsp

A:Static shock case power button... mobo fried?

Sounds like you've fried something important. You could probably try getting an RMA on the board, but they might realize what has happened.

I feel for you bro. I did a similar thing with a motherboard not too long ago.
 

http://www.techspot.com/community/topics/static-shock-case-power-button-mobo-fried.190991/
Relevancy 29.67%

Hi all, I have monitor gericom 2030 and it has some power board model that I cant find on sell, so I have buy one that is almost same with it. 4 plugs for invetors are same but one connection for t-con board is diffrent and on oroginal board I have pins (5V, 5v, GND, GND, 12v, BL, N/F) and on board that I have buy has ( 12v, 12v, GND, GND, 5v, 5v, GND, N.C, ON, DIM, MS ) So any suggests wich on wich one I should connect?
 

http://www.techspot.com/community/topics/different-power-board-on-monitor.190328/
Relevancy 29.24%

I got a M5A99x Evo Re2.0, brand new board and the audio from the rear doesnt work at all when I plug the pink and green plugs. I have an HDMI connecting from my TV to my Gcard, I get audio through the TV but cant seem to get those jacks working. Ive used two different headsets to see if it might have been the headset itself. im really stumped.
 

A:New board, no sound from front or rear jacks

Have you gone into the sound menu in your control panel and set your default audio device to your headset?

If, under the "playback" tab, the HDMI output is ticked, then this is the problem.

Just click on the correct device(It should either list your headphones or say "high definition audio", or something similar) and then click "set default".

This should solve the problem.
 

http://www.techspot.com/community/topics/new-board-no-sound-from-front-or-rear-jacks.188180/
Relevancy 35.26%

My father wants me to find my mother a laptop, he gave me a budget of around $700. In all likelihood she will mostly use it for facebook, facebook games and movies. She will mostly be using the laptop while working in a coffee stand so she can probably plug it in whenever she needs to. She probably wont replace it for some time so something that will hold up well over the years would be nice. She hates change and is used to using windows systems so I'm not sure if she would go for a mac. I really don't know a damn thing about laptops and I have no idea what to look for or where to start so any help would be appreciated.
 

http://www.techspot.com/community/topics/looking-for-a-laptop-for-my-mother.181330/
Relevancy 29.24%

Hello Everyone,

Been a long time browser of TS and am glad to finally join. I am looking to utilize a Q6600 processor and the following system board and RAM:

ASUS P5G41T-M LX Plus
Corsair XMS3 1333MHz PC3-10666

The goal is to moderately overclock the Q6600 to 3.2 GHz. In my research, I have read many positive reviews about the stability of ASUS boards, and the DDR3 capability is significant to me. However, from what I have gathered, this board can be fussy when overclocking the CPU. Has anyone had any experience with a similar setup?

I would appreciate any thoughts/comments/suggestions.

Thank you!
 

A:New project: LGA 775 board w/ DDR3 needed -- thoughts please?

Firstly, why do you need to overclock it? I'm guessing its more because you want to, than necessity, but my thoughts are below.

I run the exact same CPU in my system 24/7 and while it might be long in the tooth compared with most systems on here, it's certainly not lacking at stock speeds as it is.

Not sure if system specs is easily read right now, but for the sake of doubt, mine are: Intel Core2Quad Q6600 G0 stepping (at stock OC with Corsair H50 (push/pull) providing cooling), Abit AW9D-MAX, 8GB OCZ Gold series DDR2-1066, HD6870, Antec HCG-620 PSU, a SSD and six mechanical disks.

I wouldn't call 3.2GHz a moderate OC on the Q6600, that's more like 2.8-3.0GHz. I used to have mine overclocked but the difference was so minimal (in real terms) that the additional heat it gave off and power it consumed made it pointless. I was never able to achieve 3.05GHz or above either, but I've no doubt that more experienced hands would have managed it. Overclocking is my weaker subject in the field of IT generally speaking, and I can't say I've ever really pushed the envelope very far in that regard.

Though that said, I've always found Gigabyte boards to be much more forgiving when it comes to RAM settings. Asus in my experience can be a real nightmare with recognising the default timings and voltages for RAM, and in "my experience" need much more work to achieve the same result.

Another point that needs to be considered is LGA-775 is legacy hardware now, so you'd be spending money on defunct hardware. If you have the CPU it might be better to grab a second-hand board off of eBay or something, or maybe look to something newer and more current.
 

http://www.techspot.com/community/topics/new-project-lga-775-board-w-ddr3-needed-thoughts-please.180344/
Relevancy 29.24%

Bought me recently a new MoBo: P8H67, installed it, killed Realtek onboard in the BIOS, all thus far goes splendid.
Put in SoundMax (from my P5E Lifestyle), hardware checks ok.
Install driver... and here things go awkward: no matter what I try: SoundMax Hi Def is not found/recognized.
Tried both the DVD-soft that came with me P5E, as well as online new drivers, to no use...

Reason for SoundMax: I was slightly baffled by the power behind the tiny card, it was literally mindblowing (over my JBL's).
This power is not found on Realtek hardware, hence.

Prob: I want to keep using the tiny SoundMax, but I desperately need a driver.

Win 7 Ultimate X64 (registered)

Suggestions?

Thank you all:
Ben
 

A:P5E Lifestyle Board SoundMax to Asus P8H67

List any Problem Devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save to your Desktop
In TechSpot window, use the paper clip icon to attach the report. (If you don't see icon you may need to first click Go Advanced)

 

http://www.techspot.com/community/topics/p5e-lifestyle-board-soundmax-to-asus-p8h67.178931/
Relevancy 34.83%

Hi Sometime last year I ve purchased an ATI Radeon X Pro graphics card It was working fine until I was playing some game a few days ago and my computer froze My computer kept freezing every time fried? Pro Radeon my Could be x1650 I boot up Sometimes it froze on the Windows XP splash screen sometimes it Could my Radeon x1650 Pro be fried? froze on the login screen so it kept freezing at random occasions I d blamed the memory for the issue but I found out it was the video card But now the computer won t start at all seconds upon booting up no beep the monitor doesn t even turn on the video card shuts down the fan stops working etc What could be the problem Without the video card there is no freezing and there is a beep upon booting I ve also tried with other video cards and there was no problems I could really use the help please thanks The video card is an ATI Radeon X Pro Specs ASUS P VDC-MX Motherboard Microsoft Windows XP Home Edition Operating System Intel R Pentium R D CPU GHz Processor Sound Blaster -Bit Audigy Sound Device GB of RAM Memory used to be GB but I kept blaming the memory for the crashing nbsp

A:Could my Radeon x1650 Pro be fried?

The motherboard could be fried...
 

http://www.techspot.com/community/topics/could-my-radeon-x1650-pro-be-fried.177431/
Relevancy 29.67%

i was wondering if HIS H675FS1G Radeon HD 6750 1GB 128-bit DDR3 PCI Express 2.1 x16 HDCP Ready Video Card would work on a MSI G31TM-P21 LGA 775 Intel G31 Micro ATX Intel Motherboard.

Card # at Newegg=N82E16814161395"]

Board#at Newegg= N82E16813130234

o wait the card is ddr3 , does that mean it won't work?
 

A:Graphics card compatible with this board?

Sure, the card will work fine. The graphics card memory is independent from the memory type of the motherboard.
 

http://www.techspot.com/community/topics/graphics-card-compatible-with-this-board.176985/
Relevancy 34.4%

Fresh to Europe, stationed in lovely Germany, my beloved husband plugged his desktop into a European outlet without converting it. Genius, I know. Long story short, I want to get it fixed before he comes home from deployment. Question of the day is, with a power surge like that, which part got fried and, more importantly, can it be replaced without a soldering iron?
 

A:European outlet fried hubby's PC

It probably blew out the primary side of the powersupply (the part responsible for converting 120v AC or in this case 240v AC to lower voltage DC). If it was a half decent powersupply there should not be any damage to other components. If it was a really cheap powersupply without protection circuitry there may be other damage but hopefully the secondary side of the PSU absorbed it. In either case you definitely need a New powersupply and no this does not require soldering just unscrew the old one and disconnect the connectors and then screw the new one in and reconnect the connectors. It should only involve 4 machine screws and 4-8 power connectors in most systems. If you get a new powersupply I would highly recommend one with Active PFC, this will auto-detect the voltage so you won't have this situation happen again.
 

http://www.techspot.com/community/topics/european-outlet-fried-hubbys-pc.173206/
Relevancy 29.67%

I have been going through the process of building a computer for the first time and the motherboard is the final piece of the puzzle I am seriously considering the Asus Maximus Gene-Z as the motherboard to go along with GB Hawks OC in SLI on mATX a Is SLI usually on board avoided? air to go along with an OC i - k but I have been seeing some concerns about temperatures in general As far Is SLI on a mATX board on air usually avoided? as cooling the board would be in a mid-tower that has the dimensions of the full tower Storm Sniper with its default fans and the CPU would be cooled by a Corsair A I do have a few ATX motherboard in mind if the mATX option isn t ideal for SLI including the MSI Z A-GD ASUS P Z -V PRO or ASRock Z EXTREME GEN i - K Corsair A GB GTX Hawk in SLI x GB G Skill Sniper DDR Samsung Spinpoint TB Asus x DVD-Drive Cooler Master Storm Sniper Seasonic X- nbsp

A:Is SLI on a mATX board on air usually avoided?

Personally if I was building a computer without having any hardware to start with I would probably aim for a higher end single card rather than 2 older and now mid range 460 GTX cards. That way in the future you can pickup another higher performance card and then use SLI.

As for mATX and SLI, as long as the board supports it then there is no problem. You have stated its in a full tower so airflow won't be a problem. You might find some problems such as PCI 1x slot blocked/unusable when you have two double slot (two expansion slot height) PCI-E graphics cards in the motherboard.
 

http://www.techspot.com/community/topics/is-sli-on-a-matx-board-on-air-usually-avoided.171814/
Relevancy 30.1%

Hi all I have an asus x s laptop and a while ago the power jack inside broke off and went further into the unit I managed to take the laptop apart and retrieve the jack I then rather stupidly attempted to desolder board PCB Splintered the remainder of the unit from the board and found that apparently ASUS use diamond as solder that or I wasn t doing something right Anyway point is that the contacts stayed in the board no matter what and only with force Splintered PCB board and heat did they come out unfortunately however there are still two contacts firmly in the board Anyway as you can all imagine the inevitable happened The board warped slightly and on one of the corner points the iron went through and splintered the side picture attached A couple of questions Number And I think I already know the answer to this As this has happened will this be detrimental to the running of the laptop I m going to guess that the second I turn it on should I be successful in replacing that the power will short and the world will end or something Number Since last using the laptop I can only assume that the rest of the components processor RAM Drive etc are still in good working order and I m wondering just how successful anyone may think it would be to sell the laptop as spare parts or would I be better off taking into the yard with a shotgun Sorry about the cynical nature of this post that s just how I am that and I m incredibly annoyed at myself for thinking that me soldering iron delicate electronics was ever going to have any other outcome than this nbsp

http://www.techspot.com/community/topics/splintered-pcb-board.171757/
Relevancy 29.67%

Need info old board P4SD-VL

Hi,

<I'm trying to fix a very old pc; it's almost ready but I can't set front USB ports.>

Thatīs what I said. But more than a simple thing I need; USB frontal ports are working now. The matter is I canīt find drivers to set Sound, LAN, Modem... The pc is working fine, I've installed operating system, office programs and some other software without trouble.

Thanks in advance for your help.

Mauricio
 

A:Need old board P4SD-VL front USB pin description

Who made the motherboards chipset? VIA?
 

http://www.techspot.com/community/topics/need-old-board-p4sd-vl-front-usb-pin-description.170893/
Relevancy 28.81%

hello, ive had this desktop computer for years now and the processor is extremely outdated. I have been looking around trying to figure out how i can upgrade the processor speed but it seems the more i look up the less i know about computers...

anyways i have: Board: MICRO-STAR MS-7184
Serial Number: 5922655884

current proccessor: 2.00 gigahertz AMD Athlon 64
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Not hyper-threaded

I believe the socket is a 939? when i looked up these specs i found that the highest processor i can place is " AMD Athlon 64 X2 (up to 4800+) and Sempron (up to 3200+) processors".

Can anyone verify this?Or is it not worth investing in a new processor? i am looking to find the best upgrade rather then spending cash to buy a new computer. Any advice would be extremely appreciated.
 

A:Looking to upgrade processor, board Micro-Star MS-7184

Hey Noctis,

Truth be told you are better off upgrading your Motherboard, RAM, and Processor if you want to see any substantial difference. A socket 939 is quite a bit old and since then they have move onto the AM2, AM2+, AM3, AM3+, etc sockets for AMD Mobos and Processors.

Socket 939 processors are to the point where they are no longer just old enough to be cheap. Since they are no longer made they are old enough to be more expensive than modern counterparts in many cases.

When upgrading the MOBO and CPU you want to look into more than just the processor speed. Important factors are also the types and amount of cache for a processor, number of cores, and RAM that can be used with that CPU.

The newer Athlon II X2s as an example are a significant leap from the original Athlon 64s and a discerning buyer online can find them significantly cheap. AM2+ boards are currently somewhat inexpensive and so is DDR2 RAM. They are currently at the stage where they are old enough to be somewhat cheap but with the newest socket and processors being sold by AMD now it may change iwthin the next few years to start getting expensive again from being old enough.

You also have the route of a AM3 with DDR2 or DDR3 Ram option available which are also moderately priced.

If you check out the website pricewatch.com you can look at pricing for several different mobos, cpus, etc from various websites easily. I just completed a full build including case, HDD, Mobo, CPU, DVD-RW, RAM, Graphics card, etc for just over $350.00
 

http://www.techspot.com/community/topics/looking-to-upgrade-processor-board-micro-star-ms-7184.170905/
Relevancy 27.95%

Hey guys I just joined this forum because I need a little help with my motherboard I am not that technology savvy so I m sorry for any errors A few days ago my monitor stopped working At first I thought it was my video card so I kept fiddling around with it to see if I could fix it It worked a little so Wondering I if fix fried my motherboard motherboard) fan my how to (and I thought I fixed it Then every once in a while it would freeze I opened it up and switched out the video card but still it had the same problem of freezing That s when I noticed one of Wondering how to fix my motherboard fan (and if I fried my motherboard) the fans on my motherboard wasn t turning on It would rotate once or twice and not start but now it doesn t even rotate I m wondering if I can fix the fan its plugged in correctly and if I have to buy a new motherboard I can t tell what motherboard I have Wondering how to fix my motherboard fan (and if I fried my motherboard) so sorry So in short my motherboard fan is not working Any way Wondering how to fix my motherboard fan (and if I fried my motherboard) to fix or do I need a new motherboard nbsp

A:Wondering how to fix my motherboard fan (and if I fried my motherboard)

I would start by checking your power supply with a good tester tool and multimeter.
 

http://www.techspot.com/community/topics/wondering-how-to-fix-my-motherboard-fan-and-if-i-fried-my-motherboard.170326/
Relevancy 28.81%

Hi y'all

I got a Intel Server Board L440GX with the dual Pentium III processors and i cant get it to recognize the Mylex eXtreme RAID 2000 FW 7.01-00. I have never configured a raid before but i think i got it right(not sure) anyway the bios says that no h.d. or likewise is installed. I ain't got any ideas on what to do please help
 

A:Intel server board L440GX RAID issues

bwta, sound like you better take a look at:
http://download.intel.com/support/motherboards/server/l440gx/AcceleRAID1_0.pdf
 

http://www.techspot.com/community/topics/intel-server-board-l440gx-raid-issues.168173/
Relevancy 34.83%

Ok about a month ago my Girlfriend s eMachines ET - w quit working I thought the PS gave I have fried a motherboard think I out so I think I have a fried motherboard I took it apart and swapped out the PS with a known good PS W and still the machine will fire up for about seconds then turn off Machine does not post and I think I have a fried motherboard never is on long enough for the display to even start Now if I unplug the pin CPU power plug the pc stays runnign I think I have a fried motherboard but of course that is completely useless Not sure what to do PC has been replaced but this machine is much better than the pc s our kids use and would like to save it if I can even if I have to replace the MB my question really is do any of you think it s possibly the CPU I understand that if i change the MB then the emachines EULA for Vista is now void and I ll have to reinstall windows any help would be great Paul nbsp

A:I think I have a fried motherboard

It could be the motherboard but it's hard to say for sure. You could try to run the PC on just one RAM stick and then swap it out for the other stick to see if anything changes. Are you running it with the onboard graphics? Do you have access to a separate graphics card to test with?

All this is just to test your parts and to eliminate them as the source of the problem. In the end it could come down to the motherboard or CPU. My guess would be the motherboard first.
 

http://www.techspot.com/community/topics/i-think-i-have-a-fried-motherboard.163165/
Relevancy 29.67%

Hi, (First Post)

While it is often true that when you get no post after startup, that it is often the powersupply - it would be nice to know if the motherboard is functioning properly.
I use power supply testers, a great time saver, but does anyone know of a reasonalby inexpensive motherboard tester on the market?
 

A:Board test equipment

Well, I have seen a few mobo/ram testers on Ebay but have no idea how good they are. Just do a search on there for motherboard tester and several will come up, they are about Ģ20.
 

http://www.techspot.com/community/topics/board-test-equipment.162741/
Relevancy 28.81%

ok first off i got this board second hand from my brother he couldnt get it to work at all however he thought it was a video card compatability issue He had a ATI Radeon card and its an NVIDIA chipset on the board Now that ive giving a tiny bit of back ground ill give you the systems specs or atleast the specs itll be once its working and can see things CPU Intel core duo E RAM GB DDR x OCZ REAPER Motherboard As mentioned EVGA NVIDIA i sli GPU GEforce GS PSU Sparkle W gold class TB for storage and a GB + no =( sli output board video Evga 680i Nvidia for the OS Thats whats in my box and the box itself is a Rosewill Evga Nvidia 680i sli board + no video output =( CRUISER So far everything looks like its powers up right and and the HDD spins up it seems like its posting correctly i jus cant get anyvideo out of it Any suggestions would be helpful also keyboards will not work in any usb port and on the mointer it says entering power save mode it detects the cable being there but does not get a signal ive tried multiple keyboards and multiple video cables nbsp

A:Evga Nvidia 680i sli board + no video output =(

sounds like it's just a faulty board... it doesn't matter if you have a single ATI or NVIDIA card, it should work with either
 

http://www.techspot.com/community/topics/evga-nvidia-680i-sli-board-no-video-output.160688/
Relevancy 34.83%

A systems friend installed a GB HD on my Sony VAIO RS -- in addition to the GB HD that came with the puter He moved my D Drive to the GB and left the C Drive on the GB HD System ran fine -- for about months Then one day I heard what sounded like the HD not good -- but the noise was coming from the module fried? Power area of the Power module The puter started to behave erratically-- when I turned it off normally once I turned it Power module fried? back on it would flip into a blue screen and then start up without my even pressing the ON button on the tower So I did a CheckDisk on the C Drive -- and it found ALOT of bad sectors -- and supposedly fixed them I tuirned off the puter and when I turned it on I got a message that said part of the Operating system XP Home was bad and needed to be reloaded Once I turned off the computer I was never able to turn it on again -- I would press the switch and nothing The person who originally loaded the G HD is no longer interested in looking into this He said quot Well it might be the power module quot I have a dead puter two telecommuting jobs that are going nowhere and I need to get to the bottom of this I could order a refurb and get a HD dock and try to load everything onto the new puter -- but what other options do I have nbsp

A:Power module fried?

I would suggest you try and replace the power supply or have someone help you with replacing it and see if that solves the problem with the system not powering on.
 

http://www.techspot.com/community/topics/power-module-fried.159867/
Relevancy 29.67%

Hello I have a desktop with motherboard Via KT CF- ruinign on windows xp I had a MB memory and the computer was running very slow with lots K7VTA3 ECS RAM v8) fully isn't recognized (board of RAM isn't fully recognized (board ECS K7VTA3 v8) lags I decided to buy some more memory and bought the lot of two kit Kingston KVR X C AK total of GB I opened the computer and inserted the two memory sticks on the motherboard and switch on the computer As it runs BIOS says only MB Ram and not GB RAM Other times it reads sometimes says MB and one time said MB RAM Its very strange this Whats going on I dont know but the site says that the board accepts DDR SDRAM Did I bought a wrong set of memory sticks or is it something wrong in the computer data from Everest software ID Motherboard -KT CF- -K VTA C- Motherboard ECS K VTA v Physical Memory Total MB Used MB Free MB Utilization North Bridge VIA VT Apollo KT Thanks Boto nbsp

A:RAM isn't fully recognized (board ECS K7VTA3 v8)

I dont know but the site says that the board accepts DDR200/266/333 SDRAM.Click to expand...

You bought DDR400 so I'd say your RAM is not supported by your motherboard. Also, the voltage standard for your motherboard is 2.5 volts. Your RAM needs 2.6 volts although it should still run if your motherboard supported it in the first place. You might be able to bump up the voltage in the BIOS but I can't say for sure.
 

http://www.techspot.com/community/topics/ram-isnt-fully-recognized-board-ecs-k7vta3-v8.159153/
Relevancy 28.38%

Okay, my board is as described. I have a black bank and a blue bank. I plan on upgrading to 8 gigs of RAM this spring. With my motherboard's setup, would I benefit more from 2 sticks of 4 gig RAM or 4 sticks of 2 gig RAM?

A link to my board:
http://www.newegg.com/Product/Produ...8&cm_re=M4A785TD-V_EVO-_-13-131-398-_-Product
 

A:Dual-channel capable board, with 4 DIMM slots in 2 different colors--questions

Link us to your motherboard's website. The manual should contain the correct memory configurations.
 

http://www.techspot.com/community/topics/dual-channel-capable-board-with-4-dimm-slots-in-2-different-colors-questions.158183/
Relevancy 28.81%

So I recently had my main computer crash and break to the point I need a new computer so I figured I'd make it worth it this time.

Here's the deal: (add the www to see it)tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=6327547&SRCCODE=GOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE

Everything on there seems decent but I am curious about the board itself. Would the Intel Desktop Board DP55WB Motherboard be good for gaming, which I wish to use my computer mainly for. I have at most a 700 dollar budget and this seems like a nice deal for it. I plan on putting a Geforce GTX 580 graphics card in it as soon as I get the money as a little side note if it matters.
 

A:Intel desktop board DP55WB motherboard for gaming?

Pyron92 said:





So I recently had my main computer crash and break to the point I need a new computer so I figured I'd make it worth it this time.

Here's the deal: (add the www to see it)tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=6327547&SRCCODE=GOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE

Everything on there seems decent but I am curious about the board itself. Would the Intel Desktop Board DP55WB Motherboard be good for gaming, which I wish to use my computer mainly for. I have at most a 700 dollar budget and this seems like a nice deal for it. I plan on putting a Geforce GTX 580 graphics card in it as soon as I get the money as a little side note if it matters.Click to expand...

I'd suggest looking at the same chipset, but in either Gigabyte or Asus brands. Intel boards are fine, as much as it goes, but the BIOS is very limited as to configuration for different memory, and overclocking options. Intel really markets it's boards as mainstream items, intended for average users and businesses, they're not really aimed at the enthusiast.

The feature set can vary widely from board to board, and you should have a look at these pages to see which board has the capabilities you need;

Asus P-55; http://www.newegg.com/Product/Produ...600008069 600008216&IsNodeId=1&name=Intel P55

Gigabyte P-55; http://www.newegg.com/Product/Produ...600008069 600008216&IsNodeId=1&name=Intel P55
 

http://www.techspot.com/community/topics/intel-desktop-board-dp55wb-motherboard-for-gaming.157197/
Relevancy 34.83%

Alright so I got a psu to replace the my old have fried I looking may for answer mobo, believe I my one that had just died I plugged it all in and started up the computer I plugged each component in one by one starting with the video card I finished with the video card the mobo and the hard drives so I just started plugging in all I believe I may have fried my mobo, looking for answer my fans At one point there was a pin plug that said SYS FAN so I plugged a pin power connector into it thinking that was where the power went for the fans I was still am very tired Anyway I turned on the computer and that SYS FAN spot started to spark and smoke So now whenever I try to turn the computer on it continuously loops through turning on like it will go on for seconds and I believe I may have fried my mobo, looking for answer all the lights will stay on and then a burst of electricity will go it every seconds like its turning on again I know I am not that good at explaining but if anyone is understanding this or is willing to give it a try then please do not hesitate to ask any questions Thanks nbsp

A:I believe I may have fried my mobo, looking for answer

Yes, I'd say the motherboard is fried. I mean we are always told to avoid even static electricity discharges which will damage the motherboard. If you got sparks and smoke, it's fried.
 

http://www.techspot.com/community/topics/i-believe-i-may-have-fried-my-mobo-looking-for-answer.156648/
Relevancy 33.54%

My Computer recently broke fried Pentium Reasonable upgrade cheap D system? for down to an irreparable level this could not have come at a worse time since I will be cash strapped for the next or so months Though I have found an AMD Athlon X system for sale for only AUD Pretty much a barebones system with XP SP I can swap my hard drives and Graphics card to this computer The Reasonable cheap upgrade for fried Pentium D system? question I m wondering is due to my non-experience with AMD I m not sure how it will handle compared to my other ancient system Main uses for the computer were Browsing Photo-editing Occasional Video-Editing and some light Gaming Crysis COD Oblivion only with settings set to medium and not planning to purchase any more graphic intensive games Not sure if this computer will handle them Oh and incase this post doesn t already show the specs Reasonable cheap upgrade for fried Pentium D system? for my last computer the basics were Pentium D GHz Processor GB Hard Drive GB OS Hard Drive Watt PSU Yes I know very bad considering the video card Asus ATI Radeon nbsp

A:Reasonable cheap upgrade for fried Pentium D system?

Sure, it'd work fine; you'll need to reformat though.
 

http://www.techspot.com/community/topics/reasonable-cheap-upgrade-for-fried-pentium-d-system.155971/
Relevancy 34.4%

hello i bought a new sound card and i tried to connect it to one of the PCI slot when i was power Is My mobo my fried? doesn't on... CPU about to install the driver for the sound card my screen My CPU doesn't power on... Is my mobo fried? freezes so i switch my computer off after that i started it again however it doesnt work so i decided to remove the sound card and the computer worked however the output of the graphics is blurred so i removed the video My CPU doesn't power on... Is my mobo fried? card and cleaned it so it worked again after that i put the sound card again and same thing happened screen freezes i turned it off and when i powered it back on a beep was heard coming from the mobo so i removed the ram and cleaned it when i put the ram back and turned on the computer but it doesnt work is my mobo defected because i tried replacing the power supply but it still doesnt work Help me pls i really need tips Thanks nbsp

A:My CPU doesn't power on... Is my mobo fried?

What happens when you turn your PC on? Do any of the fans spin? Is the motherboard LED on?
 

http://www.techspot.com/community/topics/my-cpu-doesnt-power-on-is-my-mobo-fried.154085/
Relevancy 29.67%

how do u know if u have on board sound card on ibm
 

A:How do you now if you have on board sound card

The easiest recognition sign would be 3.5mm jack plugs on the rear panel of the motherboard.
http://www.dansdata.com/images/a7a266/sndconns400.jpg
3 (Green, blue, pink) is common on older boards, 4, 5 or more commonly 6 jacks for newer (and 5.1 +) sound codecs.
If you post some details of the system/board the forum will be able to give you a more definitive answer.
 

http://www.techspot.com/community/topics/how-do-you-now-if-you-have-on-board-sound-card.152783/
Relevancy 29.24%

Wondering if anyone has tried a non-Nocona, E-ATX dual Xeon board in the HAF 932. I'm talking one of the newer Dual-Xeon boards. I know I lose the single-CPU ATX back opening, but I'm more concerned about if it actually handles a dual-Xeon E-ATX board.

Thanks for any help.
 

http://www.techspot.com/community/topics/cooler-master-haf-932-e-atx-dual-xeon-board-anyone-tried-it.152497/
Relevancy 28.38%

I plan to upgrade my video card from geforce 9500GT to geforece GTS250.. my mother board model is gigabyte GA-M61PME-S2P..
 

A:Is the GeForce GTS250 compatible with a DDR2 board and PCIe slot?

Yes.
Powersupply? Just making sure...
 

http://www.techspot.com/community/topics/is-the-geforce-gts250-compatible-with-a-ddr2-board-and-pcie-slot.152306/
Relevancy 30.1%

I want to put together two of the new GTX 460 video cards and using an i7-870 proc.

Any SLI mobo recommendations?
 

A:SLI board recommendations for the GTX 460 and i7-870

Hi Tom,
what price range are you in here?
......Hmmmmm, something tells me Chef will be here in a minute with 3....no...make that 4 recommendations.
 

http://www.techspot.com/community/topics/sli-board-recommendations-for-the-gtx-460-and-i7-870.150526/
Relevancy 28.81%

Hi

I want to turn on my PC automatically during late hours so that I can do some downloads and maintenance works on my PC automatically!!
But I cant find an option for RTC alarm enabling in this BIOS!!
Whats wrong with this Mobo?

Will any one help me?
 

http://www.techspot.com/community/topics/how-to-enable-rtc-alarm-on-my-intel-desktop-board-d102ggc2.150251/
Relevancy 33.54%

Hello, first off let me say this is a wonderful site and in sadder we couldent have met under better terms .

So this is the problem.

1 year old custom built pc. Amd 250 3ghz dual core,
gigabyte Ga-ma78gm-us2. Mobo
original videocard: 7600 gs nvidia
new card 8800gts nvidia.

After installing the new card it made a high frequenzy beeping sound. So I immediatly shut it down and switched the videocards back... Only to hear a lowe freq. Buzzing sound...

So I took that card out as well, and turned it on, again it made a beeping sound.

I can hear all the peices starting up but there's no display. Can anyone tell me what parts I killed .
 

A:Issues after installing video card, was mobo fried?

Thank so much for posting this thread

I have the same problem. Help us please.........!!!!!!!!!!
 

http://www.techspot.com/community/topics/issues-after-installing-video-card-was-mobo-fried.148761/
Relevancy 29.67%

Hi I have been having problems with my hdd s circuit board on my dell d I aint sure what happen I think it Toshiba circuit HDD board was just my bad luck Anyways I was wondering if its possible of saving the HDD by switching the board with one of the same model boughten brand new off the internet Also I forgot to mention that I put a master password Bios password also applied but thats not a problem since I am able to enter my password on the hdd so no could get into it without my consent just in case it got stolen I am just wondering if that will screw anything up with the new circuit board The name and model of the hdd is Toshiba Toshiba HDD circuit board MK GAX I hope someone can give Toshiba HDD circuit board me some advice on this topic because I don t want to wast my money which ever way I go buy a new hdd or just a circuit board Please respond and thanks in advance nbsp

A:Toshiba HDD circuit board

Come on people, just don't let me hang. I need something, thoughts, ideas, and/or anything else. I just don't want to leave with nothing...
 

http://www.techspot.com/community/topics/toshiba-hdd-circuit-board.147872/
Relevancy 29.67%

I will be upgrading my system in july and was wondering if anyone can recomend a new cpu, motherboard and DDR3 sims. I currently have an E8500, ASUS P5N-32E, GTX275, Corsair TX650 PSU and 4gig of DDR2. I was thinking of going with the an Intel Core i7 930 2.80Ghz (Bloomfield) (Socket LGA1366). Can anyone recomend a good board around Ģ150-180 that will fit this CPU and also some DDR3 sims?
 

A:New CPU, board and memory time

The Asus P6X58D-E is a great motherboard at your price point.

Are you planning on going with 6GB of DDR3 memory to utilise the CPU's triple channel memory controller? What's your budget for the memory?
 

http://www.techspot.com/community/topics/new-cpu-board-and-memory-time.147034/
Relevancy 34.83%

Hi, i almost killed it, i cant believe it.

I was replacing a failed hard drive and didnt check the sata cable like i always do and of course it was wedged in the cards fan stopping it completly.

Only knew something was up when my monitor went black 3 times during windows installation, so i opend up the pc again to the smell of something cooking, touched the graphics card and actually got 3 blisters on 3 knuckels.

Anyway its still alive but idle temps are now 45-50c when they used to be 35-40c, and load temps are 80-90c when they used to be 65-70c

I THINK all i have done is cooked the thermal compund beyond use, would you agree? what should i use as a replacement?
 

http://www.techspot.com/community/topics/nearly-fried-my-5870.146575/
Relevancy 34.83%

Hi all Got a problem with my laptop the other day Was running the laptop as normal when all of a sudden the graphics is I fried card my think screen went dark then it started flashing on and off randomly every second or so So I turned the laptop off and didn t use it until the next day I figured the graphics card might just have overheated or something that said I wasn t I think my graphics card is fried running anything very graphics intensive when it happened The next day I turned on the laptop and got blue artifacts on the screen on boot-up and as windows I think my graphics card is fried was loading and then where the user log in screen should have been I just got a screen full of artifacts I rebooted in safe mode disabled the graphics card and tried booting up again This time I got the same artifacts right up until the user log in screen showed up which was fine I m guessing the on-board graphics didn t kick in until this point or something Since then I ve tried installing a fresh copy of the graphics card drivers bit of a long shot I know which hasn t seemed to fix it I ve a couple of questions which I m hoping one of you knowledgeable folk can answer Could this have been caused by anything other than the graphics card If it s the graphics card could it have been caused by anything more simple and easier to fix than the card actually frying Is there any way to check what happened besides before actually opening the laptop up it s outside warranty anyway so I don t mind opening it up it if you think it s worth trying to fix The laptop itself Is a HP Pavilion dv ea which is about and a half years old so at this age I suppose stuff like this is to be expected Laptop specs are here Any all help required appreciated nbsp

A:I think my graphics card is fried

the only other thing that could cause this other than the graphics card is the screen itself. laptop screen failure is fairly common, maybe even more so than onboard adapter failure, and can be fixed in a lot of cases. no promises though. the only thing you can really do is try reinstalling the drivers and since you've done that already i'm inclined to point at a failing display.
 

http://www.techspot.com/community/topics/i-think-my-graphics-card-is-fried.144774/
Relevancy 33.97%

I recently tried to record some sound off my computer onto my Fostex I already fried two channels of the Fostex way back just by trying to dodgy fried sound a cable? Have my I with motherboard get an audio signal into it and plugging it in while everything was switched on d oh but the computer itself was fine with it This time I fried a third channel of my Fostex I plugged everything in in advance Have I fried my motherboard with a dodgy sound cable? from the line out to the line ins of the Fostex and fried the right channel of the Fostex Mad with myself for losing yet another channel I very carefully plugged in a new channel and no sound was coming through except a rumble crackle I plugged headphones into the computer and still hear just the rumble Headphones still work with any other device Same with speakers - rumble rumble Device manager says the sound card is working fine I pulled out the card and rebooted trying to use the audio out that comes with the basic setup a green jack on the back of the computer that comes stright off the motherboard and get exactly the same rumble So I put the sound card back in another PCI slot and after windows successfully instals it still the same rumble No more sound at all except the rumble Have I fried something more important than the sound card itself Is that possible I am now pretty sure the cable was dodgy and possibly the two poles got crossed at some point in the wiggling of the cable Aaron nbsp

http://www.techspot.com/community/topics/have-i-fried-my-motherboard-with-a-dodgy-sound-cable.144447/
Relevancy 30.1%

Hey everyone!

I know this might not be possible but I'm wondering if you can uses two SLI cards, but use the on board port to push the output video. I have two 9800 GT cards with dual DVI connections. The motherboard has a HDMI output and I would like to hook this pc to my HDTV. I can hook the the on board port just fine but the system doesn't use the graphic cards at all. Is their a way to make the graphics cards work when their ports are not in use? Thanks in advance!

Specs
2 X 9800 GT
1220 modular power supply
Dual core AMD 3.2 GHz
2 X 500 GB hardddrive
4 GB of RAM
 

A:On board plus two SLI cards

obviously it wouldn't work. you cannot expect the graphic card to output the display to onboard HDMI port right? it's time for DVI to HDMI converter.
 

http://www.techspot.com/community/topics/on-board-plus-two-sli-cards.144412/
Relevancy 28.81%

How do i fix or enable my system board Dell Latitude C640 on my laptop ?? Question US Marine in Iraq needs help azap!!!!!!!Sempre Fi USMC
 

A:How do I fix or enable my system board on my Dell Latitude C640?

You'll have to explain what is "system board" and what exact problems you're having.
 

http://www.techspot.com/community/topics/how-do-i-fix-or-enable-my-system-board-on-my-dell-latitude-c640.143065/
Relevancy 28.81%

Hello all I m new here almost as new at poking around inside my computer at this point its nothing lost nothing gained I have read several hundred posts of others who also fell victim to these substandard machines An e machines label wont be on my desktop again even if its case is blotted out with whiteout Anyway enough rant I m here for your help I have an model T amd athlon failed board victim Unknowing emachine, 754/478 socket replacement, of power supply that took the motherboard with it originally a - bit Unknowing victim of emachine, board replacement, socket 754/478 Mhz gb x machine msi MotherBoard I have looked at options and due to purpose or use of it I remain torn as to the best way to replace it seems Unknowing victim of emachine, board replacement, socket 754/478 Cputopia com On Sale has a motherboard basic single core board processor and processor fan for a Unknowing victim of emachine, board replacement, socket 754/478 bit over a hundred dollars dependent on options selected they also have a box case processor board and power supply for around dependent upon how equipped while the power supply upgrade is at one page its at another No big deal about that Anyway my other option is to get a sole independent board with the same socket as my oem processor motherboard and reuse my Atlon Processor - HD - DVD-Cd and new windows program as such Now the crux of the problem is I have seen T quot s listed here and elsewhere as having come from the factory equipped as socket and processor as well as How do I know or how can I tell which one I have I need to compare performance of the T - socket to the Sempron quot its been suggested this Sempron also comes in a variety of speeds and cores some better some worse than the Atlon it is dependent on the encoded processor suffix quot No description of such is available with the advertised replacement board and case at cputopia and I certainly don t want to go down or backward in speed or performance There are no performance specs advertised with this Cputopia com replacement board case cpu fan or other optional parts available either essentially no sepec no matter what I buy of the sempron All replys will be appreciated my budget doesnt give me room for errors do it once and do it right the first time wish I had been this cautious when I bought the emachine but budget was not as bad as now come Halloween I m gonna put lipstick on it put it outside and call it a pig with a big emachine billboard Regards to all here Leo nbsp

A:Unknowing victim of emachine, board replacement, socket 754/478

Dude, get a grip. I know less about computers now than before I read your post.

I thought that socket 478 was Intel (Pentium Celeron), now I come to find out that it's AMD.

An AMD Sempron 3000 only comes in one speed, if it's another speed, then it has a different number.

All of the s*** you mention is beyond obsolete, so maybe it's time for a whole 'nuther computer. Please, I heartily suggest that you avoid attempting to build a machine, at least in your current state of mind.

I don't think that any of us here are really equipped to deal with the anxiety, angst, or incoherent and rambling thought patterns you have exhibited thus far, let alone what you're trying to pass off as sentence structure.

BTW, my Emachines T-5026 just reached its 5th birthday. If you'd like to check in and wish it many happy returns, (pun not intended), here's the link; http://www.techspot.com/vb/topic143315.html

I would argue that it is not really possible to be an "unknowing victim" of Emachines.

You bought it because it was cheap, cheap s*** breaks. So where's the surprise, the mystery, or the unpredictability?
 

http://www.techspot.com/community/topics/unknowing-victim-of-emachine-board-replacement-socket-754-478.143436/
Relevancy 29.67%

I've got an old ECS Elitegroup PF21 extreme motherboard. Now ever since I reformatted I have had no sound from my on board audio. The only way I have been able to was through my USB headset. I've never formatted a computer and it was my first time. Everything works perfectly fine and I have no problems other then this. Does any one know what could have gone wrong?
 

A:On board audio not working

Download the drivers from the motherboard's support site here
 

http://www.techspot.com/community/topics/on-board-audio-not-working.143323/
Relevancy 34.83%

I have a gateway m Its about a year and a half old and has gotten quite a bit of use About months ago the harddrive failed and i replaced it I also upgraded it to windows motherboard my Is fried/frying? at this time It was fine until about a month ago when it suddenly started having trouble starting up Is my motherboard fried/frying? I figured it was the CMOS battery and replaced it No luck here s a rundown of what happens stage when i hit the power button the wireless icon lights up but nothing else happens The latops sits there blank screen no light but the wireless I then have to manually turn it off and on Is my motherboard fried/frying? again This usually happens to times in a row stage after that happens - times when i push the power button the wireless light lights up as before and the CD DVD light flashes I hear the drive start Then nothing this usually happens about - times with me manually restarting it each time stage i push the button the wireless lights up the cd light flashes and the harddrive light flashes of a split second the HD makes noise for a split second and the laptop immediately restarts itself it goes through this process maybe a half dozen times then stops with a blank screen I think manually restart it and go through this stage a couple more times stage after going through stage a couple times the wireless light lights up the cd flashes the HD flashes and the Caps lock and Num lock icons flash it then acts like its going to start but instead just has a blank screen i maunally restart it this usually happens twice stage after stage happens twice it beeps once and brings up this screen if i hit f and reset the default bios we go all the way back to stage If i hit f to resume i get this screen for a couple seconds and then windows starts Once windows starts everythign is perfectly fine The laptop runs as good as it ever has it just take about minutes to get it to start I find it weird that the startup progresses like it does and its always pretty much the same I know the this laptop has a history of bad boards is the motherboard causing this Any help would be greatly appreciated nbsp

A:Is my motherboard fried/frying?

I'm not sure whether it'll help but read this.
 

http://www.techspot.com/community/topics/is-my-motherboard-fried-frying.142539/
Relevancy 55.47%

The mother board is an ASUS P5Q? I know the adapter is working because I can hook the cable that comes from the case to another sata slot shut down turn the enclosure on and boot and I have a third hard drive. But that is not how I would like to do it. If the mother board would recognize the enclosure it would give me an icon in the tray to shut it off and I would not have to reboot to back up something.


Thank u for any help
 

http://www.techspot.com/community/topics/how-do-i-get-this-mother-board-to-reconginse-an-e-sata-to-sata-adapter.142200/
Relevancy 29.67%

Hello all,

I have about 5 choices for motherboards here and all of them are within my budget. But all these mobos seem to have fairly the same reviews. So can you please help me decide? BTW I do plan to overclock my system.

- Gigabyte GA P55MUD3
- ASUS P7P55 D
- Intel DP55KG
- MSI P55 GD65
- Gigabyte GA P55M UD2

Thanks.
 

A:The Best LGA 1156 Socket board

Probably the MSI would offer the best all round feature set. All would offer basically the same stock performance.
I'm personally not a great fan of MSI, but that's because of personal experience with their P35/P45/680i and 780i boards. Haven't worked with a P55 based board as yet (too expensive in this part of the world) so as with the other choices I would seek out customer reviews as a basis for comparison in addition to published spec sheets and reviews.
 

http://www.techspot.com/community/topics/the-best-lga-1156-socket-board.142077/
Relevancy 25.8%

I have a problem and I think it s memory related I read the post about quot Dual-Channel Memory in Single-Channel Motherboard quot But it didn t help plus it was memory channel Dual board? single in Channel from Here s my computer it s old I know I don t have the money to upgrade all of it - Intel Pentium D GHz - EVGA GeForce GS MB GDDR PCI Express - Intel D GGCL ATI Socket Dual Channel memory in single channel board? MicroATX Motherboard - GB x MB PC DDR MHz CL Memory - Ultra -Watt power supply - Windows XP bit I recently bought a memory upgrade GB x GB -Pin DDR SDRAM DDR PC Dual Channel Kit My computer worked fine minus the small memory amount before I installed the new memory After I installed the new RAM my computer posted got to the windows splash screen got to the log in screen let me log in then loaded the OS While loading the OS and launching other start-up programs my computer froze I restarted many times and it fixed it It never got past a few seconds after loading the OS and a few programs I reinstalled my old memory and it worked fine again without a hitch What is the problem Is it the fact that the new memory is dual channel and the motherboard is single channel I re-read the specs of my mobo and it said that dual channel is optional However when I go to the BOIS menu F on startup it says quot single channel mode quot whith the new dual channel kit is in Is there something in the BIOS I should change Something to download Please Help Thanks in advance - Veng nbsp

A:Dual Channel memory in single channel board?

Well, I can say I solved my own problem.

After I spent the last 4 hours trying to find the problem. I ran a bunch of mem tests, cleaned the mem slots, etc... It turns out it wasn't a hardware issue at all. I was wiggling my mouse on start up and noted the time it froze... and every time it froze an application was launching in the system tray.

Turns out it was Norton F'ing Anti Virus....

The second it launched the computer froze. So I booted in safe mode and disabled the start up and all other functions of Norton. Rebooted in normal mode, and sure enough, it worked! Without a hitch!

Now here comes the Beach of it. Since I couldn't uninstall Norton because I disabled it (i.e. nothing would run because all the extensions, shells and services for it were dead), I rebooted in safe mode to uninstall, BUT Norton doesn't work in safe mode... WHAT!? The damn program specifically states in a condescending dialog box that you "must reboot in normal mode to access Norton... blah blah blah"

What kind of Virus program doesn't let you access it in safe mode? Isn't that the point, to run a virus scan in safe mode? Piece of crap! But anyways, I digress.

So now I finagled a way to run in normal mode without Norton launching to uninstall it. Uninstalling as we speak, actually.

*SO*

To answer my own question:
Yes, dual channel kits work in single channel boards (Just make sure you uninstall Norton before you put the new RAM in, haha).
- Veng

p.s. After this... I'm switching to McAfee or some sh*t.... Christ. YOU HEAR ME NORTON!? GO SUCK A FAT HAIRY LOBSTER C*CK!
 

http://www.techspot.com/community/topics/dual-channel-memory-in-single-channel-board.141757/
Relevancy 33.97%

Yesterday my BFG GT OC began giving me a distorted picture Images http c ac-images myspacecdn com images Is image card Graphics fried? distorted, it l e c ec b b cb baa ab jpg http c ac-images myspacecdn com images l bbf c ae f eb bf dbcb ceaeb jpg The card was working fine the day before without any problems so i am not sure what happened to make the card output a bad image I know that it is the GPU that is the Graphics card image distorted, Is it fried? problem because when it is removed and my rig is running on my integrated GPU the picture is fine Also when i try to boot the computer with the GT when windows begins to boot i get a blue screen http c ac-images myspacecdn com images l bbf c ae f eb bf dbcb ceaeb jpg telling me quot Attempt to reset display driver and recover from timeout failed quot So i booted in safe mode with the card in and installed the manufacturer drivers from the CD that came with the card I then restarted and the picture was still distorted I am not sure what is going on this is what i have tried Running the card on a different monitor with a different DVI cable Tried both DVI ports on the back of the card Pulled EVERYTHING out of the case and cleaned Cleaned the PCI-e pins on the GPU w rubbing alcohol and q-tip Checked for hot spots on the bottom of the card there are none Checked for dust hair in the PCI-e slot Nothing Checked for bent pins on the DVI ports there is one on the right port and two on the left http c ac-images myspacecdn com images l d a c debd c ff b c jpg http c ac-images myspacecdn com images l b eb f c a b d c ec c d jpg I straightened and tried booting up again no change Reset BIOS Started in Safemode Reinstalled drivers and am running my integrated GPU without a hitch If anyone has any idea what is going on it would be VERY much appreciated as you would be saving me some money if it is fixable Thank you nbsp

A:Graphics card image distorted, Is it fried?

Considering you've already tried a lot of stuff, sending the card in for RMA is probably your most practical option at this point. It looks like the card is artifacting slightly and the BSODs could be pointing to faulty vram.

Before sending the card in, remove the card (use integrated GPU) and run Driver Sweeper in safe mode to remove all files associated with the display drivers. Once that is done, shut the computer down and install the 8800GT again. Try to boot in normal mode if you can and install the latest drivers, or the last known set that worked, and restart. If the card still prompts artifacts or other distortions, send it in. You should only need to pay for out shipping if the card is covered under warranty.

Hope that helps...
 

http://www.techspot.com/community/topics/graphics-card-image-distorted-is-it-fried.140622/
Relevancy 34.4%

I need to order my mother a 22 inch monitor but I'm not sure which one to order. I would prefer to order it from newegg but if their is a good deal on one somewhere else tell me! It will have to be connected by d sub not dvi so I'm not sure if image quality is a very big deal. She will use it for browsing and 2d games such as zuma and bejeweled as well as browsing but her ancient pc only has integrated graphics so will it handle it fine?

I was thinking that these ones looked good but I'm not sure which will be most reliable.

http://www.newegg.com/Product/Produ...2E16824236078,N82E16824009174,N82E16824009145
Edit: Ahh yes of coarse I forgot to mention the budget, 150 to 170 would be ideal.
 

A:Choosing a 22 inch monitor for my mother

Any help would be appreciated.
 

http://www.techspot.com/community/topics/choosing-a-22-inch-monitor-for-my-mother.140199/
Relevancy 29.67%

Hey im thinking of upgrading my pc so i can just hook it up hdmi to my tv. Ive looked around and my mobo only supports pci cards, which when i checked the hdmi out cards were a bit pricey. It also has one agp 4x slot but cant find a decent card in that department.

Should i get a new MOBO instead with an integrated hdmi out because another benefit of that would be a better CPU and ram support (mine currently says max memory is 1 gig on crucial, but i looked up the serial and says it supports 2) I do want a faster and stronger rig but dont know if all my components would matche up with a new board.

What would i need to look for in terms of choosing either of these options. My case apparently supports uATX (micro).

Thanks
 

A:Upgrade board or new video card?

Depends on your cash situation. Sounds like your PC is a bit old so a refresh would be in order. Particularly if you have a nice TV, you are probably going to want to use the PC for gaming/media.
 

http://www.techspot.com/community/topics/upgrade-board-or-new-video-card.138938/
Relevancy 29.67%

Could someone give me a link to a motherboard beeper as this board does not come with one?


thank u Nick
 

A:Running a P5 Series ASUS board

How about this one? http://www.cwc-group.com/8ohm.html
 

http://www.techspot.com/community/topics/running-a-p5-series-asus-board.138060/
Relevancy 29.67%

Hey all I am totally new to overclocking or working with the inside of a computer in everyway I watched my friend put this computer together for me he recommended what parts I buy etc about years ago The only thing I did was to pop in the RAM Ok so basic questions I have then I will list my specs Is it worth it for me to overclock I am super tight on cash and just want to buy some new RAM and get this thing faster for about - months till I can afford a new computer I am considering buying gb of Kingston ValueRAM GB x GB -Pin DDR SDRAM DDR PC System Memory Model KVR X C AK G - Retail for bucks thats my budget unfortunately So is it a good idea Any advice on some basics of how I can begin to overclock on this board Specs Neo4-F 3200+ K8N on for to Looking AMD advice board my OC follow Name AMD Looking for advice to OC my AMD 3200+ on K8N Neo4-F board Athlon Code Name Venice Brand ID Package Socket Technology nm Core Voltage V Family Model Ext Family F Ext Model F Stepping Revision DH-E Instructions MMX DNow SSE SSE SSE x - Core Speed MHz Multiplier x Bus Speed MHz HT Link MHz Looking for advice to OC my AMD 3200+ on K8N Neo4-F board L Data KBytes -way L Inst KBytes -way Level KBytes -way Caches Size KBytes Descriptor -way set associative -byte line size L Cache Size KBytes L Cash Descriptor -way set associative -byte line size L Cache Size KBytes L Cash Descriptor way set associative -byte line size Motherboard Manufacturer MICRO-STAR INTERNATIONAL CO LTD Model MS- version Chipset NVIDIA nForce Rev A Southbridge NVIDIA nForce MCP LPCIO W EHF Brand Phoenix Technologies LTD Version PG Graphic Interface Version PCI-Express Link Width x Max Supported x my card NVIDIA GeForce GT with nm technology Core MHz Size MBytes Shaders MHz Memory MHz Type DDR Bus Width bits Memory x MBytes Kingmax Semiconductor slices or w e you call em Type DDR Channels Single Size MBytes DRAM Frequency MHz FSB DRAM is CPU CAS clocks RAS to CAS Delay tRCD clocks RAS Precharge tRP clocks Cycle Time tRAS clocks Bank Cycle Time tRC clocks Command Rate CR T DRAM Idle Timer clocks Max Bandwidth PC MHz My current RAM timing tables Frequency of JEDEC MHz CAS Latency of JEDEC RAS to CAS of JEDEC RAS Precharge of JEDEC tRAS of JEDEC Voltage for JEDEC V Frequency of JEDEC MHz CAS Latency of JEDEC RAS to CAS of JEDEC RAS Precharge of JEDEC tRAS of JEDEC Voltage of JEDEC V I hope that is all the information necessary It took me a long time to type it all out Too bad this CPUZ program doesn t have an easy copy paste text file Please let me know if there is anything else I need to provide that can help out Thank you so much to anyone out there willing to take time to help me out nbsp

A:Looking for advice to OC my AMD 3200+ on K8N Neo4-F board

HI calio, welcome to Techspot
what is it you want to accomplish with OC'ing? is it for gaming performance?
 

http://www.techspot.com/community/topics/looking-for-advice-to-oc-my-amd-3200-on-k8n-neo4-f-board.137208/
Relevancy 34.83%

Hello pplz,

ok, scenario, i plugged in an external hard drive using the sata plug in my pc and the external hard drives power supply. My pc then didn't want to boot up anymore. After a few tries it did however. 2 days ago, after having unplugged my pc from the wall socket, after it was turned off, i tried to boot it again, but it did not want to start up :dead:. The fan starts spinning, but the screen stays blanc and it doesn't give me the beep from post. I then unplugged my DVD-Rom and it worked again. I left my dvd-rom unplugged and used it for 2 more days without hassle. Today, however, as i started up Guitar hero, it froze and the screen went blanc, it still powers up the PSU fan, but it does not post at all and there is nothing on the screen.

Any suggestions?
 

A:PSU/MoBo, how do i know which is fried?

Try running your computer with another PSU (borrow one if you can) and see if you encounter any further problems. If it still fails to work, it could be a fried mobo.

Also try clearing your CMOS by removing the mobo battery and reinserting after about 10 mins.
 

http://www.techspot.com/community/topics/psu-mobo-how-do-i-know-which-is-fried.136482/
Relevancy 34.4%

This message motherboard Dell fried? E520 a close parallel to a previous topic Drive Bay Power Supply w Dell Dell E520 motherboard fried? mobo My E came with a LE video card The Dell website suggested the EVGA GT gb video card as an upgrade It didn t work - result PSU fan noise and blank Dell E520 motherboard fried? screen Figuring that EVGA was serious about the minimum watt PSU I installed a watt Cooler Master The install went well Fan noise dropped dramatically until I added the the Dell E520 motherboard fried? GT - then I got the same result as before PSU fan noise and blank screen Finally I called EVGA The tech rep had me searching for the four-pin power connector on the motherboard Due to a miscommunication I plugged a pin PSU connector into an empty socket on the mobo which turned out to be the connector for an optional media card reader Power was applied Now the quot flea power quot indicator on the motherboard responds with a yellow light when power is applied That yellow light is now the only thing my E will do in response to power It doesn t post There is no initial whir of the PSU fan - nothing - except the little yellow light I ve gone through the process of removing expansion cards hard drives memory etc I swapped out the CMOS battery and tried using the original PSU Still nothing but the yellow light Lesson don t mess with electricity while on the phone From what I ve read on this site the aforementioned Drive Bay Power Supply w Dell mobo due to the new PSU itself without me plugging connectors where they shouldn t go could kill both the mobo and the PSU So here are the questions Is there any reason to believe that my mobo might not be fried If I get the mobo repaired is it true that I need to use the original PSU Is it possible to replace the mobo with a non-Dell mobo processor combo with a view to upgrade speed and memory capacity I am not a gamer I just wanted the better video card for graphics work CAD etc Memory gb is DDR -bit Vista Desired -bit OS with higher memory limits nbsp

A:Dell E520 motherboard fried?

There is every reason to believe your motherboard might be fried.
But to know for sure, you need to remove everything from the board, then do a basic reinstall...
This is to make sure you haven't missed something.]
I would test with the old setup, original hard drive, original power supply.. and keep all the new stuff off it for now.
 

http://www.techspot.com/community/topics/dell-e520-motherboard-fried.136408/
Relevancy 34.83%

Hey I m new here and I really could use a hand Today I went off and bought myself a new chassi one more graphic card and a motherboard all brand new My old fried? got motherboard New motherboard was okay but a bit outdated Besides I ve been thinking about doing crossfire with my Took me a couple of hours to set things up After everything was done I started it up I was suprised it even started The only problem that came up was quot Unknown CPU Detected Update BIOs for full power quot or something like that I tried starting it up got a blue screen I read up on some forums and people with the same problem said that New motherboard got fried? you d have to update BIOs The problem here was that I recieved New motherboard got fried? no CD from my motherboard box So I New motherboard got fried? went on my brothers computer which I am at right now and downloaded the latest bios for my motherboard Burned it on a CD and then used it to update bios Everything ran smooth as well It said that it had to restart everything was still fine Then after it resetted nothing happened I tried to start up the computer but nothing happens A blue light starts glowing along with the gfx card for a mere second But that s all So here I am tired frustrated and disappointed The manuals didn t tell me jack-all about anything of this Everything I plugged in was correct My old computer was built from scratch so I did everything on my own and it worked Any ideas I think I fried the motherboard for some reason but I can t get to bios and fix it I read online as well that you could take out the battery and decharge it but I m not that skilled to be playing with the chips ANY suggestion how to fix this is GREATLY appreciated Thank you And sorry about the wall of text And yeah here s my spec Asus ATI Radeon HD GB in xfire Asus - Socket - ATX nForce i Striker II Formula Intel Core Duo E GHz MB MHz Socket Corsair XMS MB DDR PC - MHz Seagate Barracuda GB SATA II Windows Vista x bit Tell me if you need more information Edit After letting the computer cool for a bit it starts up only to be shut down after about seconds nbsp

A:New motherboard got fried?

CPU's rarely fail... but if it has pins, check the pins to assure none are bent over...
Did you overclock before you got it running in normal mode?
 

http://www.techspot.com/community/topics/new-motherboard-got-fried.136092/
Relevancy 29.24%

Hello.

I plan to build my own computer since the DELL gx280 have given hard time to me. The i5 process would like to be my system in this time. Here is the list what I estimate on ebay (mostly)

CPU: Intel Core 2 q9400 - $190 OR i5 - $200
CPU Fan: ???
M/B: Asus P5KPL-CM - $60 OR Intel DP55WB - $100
Ram: Kingston 4gb DDR2 800mhz - $60 OR DD3 -$70
Video: ATI Radeon 4850 - $124
HDD: Western Digital 500GB 32mb, 7200 rpm - $56
DVD-RW: LG DVD-RW - $31
CASE: standard ATX Tower with 500w power - $45

I have no idea about a CPU cooler. What I heard that the CPU cooler should be different ones depends on the M/B and case.
What kinds of cooler can I use for my system? Also how am I able to firgue that out?

Thanks.
 

A:Cooler for Core i5 processor with Intel board?

Fast Healthy Weight Loss

I plan to build my own computer since the DELL gx280 have given hard time to me.

burnfatlikeafurnace.com/
 

http://www.techspot.com/community/topics/cooler-for-core-i5-processor-with-intel-board.136168/
Relevancy 29.67%

Ive got a toshiba laptop and i went to sleep watching a dvd on it.
It fell off my bed and now when i type it doesnt keep up to speed even if i plug a different keyboard into it and use that.
I constantly have to go back and r-type everything i do

Any suggestions on how to possibly sort it out myself?
 

A:Laptop key board promlems

Dropping a laptop can do all kinds of damage... If you're not comfortable taking laptops apart, you will have to take it to a computer repair shop
 

http://www.techspot.com/community/topics/laptop-key-board-promlems.135519/
Relevancy 28.38%

Hey,

I have ( and currently using) onboard audio for my sound output. It is Realtek onboard audio for an ASUS MOBO. Its 8 channel audio and im purchasing a sound card. It's a Creative Labs 7.1 sound card with EAX. Is it a good upgrade? I'm sure it is but im just looking for some quality advice first

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4514390&CatId=2771
 

A:On-board audio or dedicated sound card - pros and cons

It's not quite the same as switching from on-board video to a discrete video GPU card, but it's the best comparison that I can think of. At least with the video you can see a significant difference. With audio it's a little harder to hear a difference, especially since you need a good speaker set to reference from. If your CPU is a little down in power then you'll notice some improvement in games too. A lot of the crackling and poorly addressed effects will be cleaned up. For me, I was also able to hear other players further in a map than I could with on-board audio.

One thing to add to this brand of card that you're buying: The manufacture makes different audio profiles available in their software for this card. These profiles are designed for entertainment, games, etc... Enabling or disabling a profile might make the difference if EAX is available in-game or not. If it does not come with the manufacture's software, I would suggest looking for a disc ISO since this software would be necessary to configure the card for these options. And the updates at the manufacture's website might be incomplete.
 

http://www.techspot.com/community/topics/on-board-audio-or-dedicated-sound-card-pros-and-cons.133905/
Relevancy 34.83%

So I was surfing the web today and my computer froze I didn t think that was too abnormal so I waited for it Then both my displays turned gray and each half of the screen started switching between a dark and light shade and little black and white dots raced across it After a few seconds of video fried your card Has ever itself? this the computer shut off completely and would not reboot I popped open the case and what do I see One of the spring loaded clips that holds the small cooler on my GPU was Has your video card ever fried itself? gone and the cooler was hanging off diagonally I thought this was good as it should be easy Has your video card ever fried itself? to fix I put a dot of thermal paste Has your video card ever fried itself? on the gpu and put the two pins back in It would power up for a second but then shut off So I thought the paste might be short circuiting something I cleaned it off and put back the cooler with no paste Immediately after pressing the power button the video card shot out a spark and a small cloud of smoke so naturally I pulled the cord Upon inspection a fragment of one of the power regulating chips I think was missing I m still waiting to see if EVGA will replace it nbsp

A:Has your video card ever fried itself?

That is really not possible... but it can seem like those events are independent of human action.
Those dang spring clips create more damage to computers and printers than we can tolerate. We're getting mad as heck, and were not going to take it any more...
But I suspect your card was already in the midst of failure when you decided to improve on things.
 

http://www.techspot.com/community/topics/has-your-video-card-ever-fried-itself.134554/
Relevancy 34.83%

Ok I have a problem, a couple nights ago I was trying to fix a USB port in the back of my pc. I made sure everything was unplugged and the PC was powered off, I used a pair of needle nose pliers to try and bend the pins back, got them back a little. I plugged everything back in and tried powering it on and nothing happened, then I thought maybe it was a connection issue took everything apart and cleaned everything then put it back together, still nothing. One thing there is a green light flashing on my motherboard but it won't power on.
 

A:Fried motherboard?

What was the problem before you started diddling with it?
Sounds like the first move is to put it back like it was. You likely have damaged the system board in a way that can still be fixed... get it back like it was without causing any parts to break off.
 

http://www.techspot.com/community/topics/fried-motherboard.133501/
Relevancy 34.4%

I ve been googling this for most of the latter half of today and I realize this is hoping POST; not No mobo probably fried, a common event After the troubleshooting I ve done I m holding out some hope that the mobo isn t trashed but we ll see mobo No POST; mobo probably fried, hoping not Gigbyte GA-K NE Rev cpu AMD Sempron RAM sticks of OCZ MB vid card nVidia psu Antec No POST; mobo probably fried, hoping not TPII No POST; mobo probably fried, hoping not The tower is my pc my file sharing and browsing-while-gaming computer It normally runs Earlier this afternoon I decided to shut it down and clean it I did just that and the cleaning was unremarkable I removed only the cpu fan heatsink and then the video card There wasn t as much dust as I d feared and it was short work A few q-tips looked after the rest of the guts of the tower Cleaned the cpu and put fresh grease on it put everything back together and tried to power it up Almost nothing happened The DVD-RW drive light would quickly flash twice and I could hear the fans just beginning spin like they d gotten a half-second of power Checked the plugs on the back of the tower tried again a few more times and then pulled it all out and started over again Checked all the connectors in the tower and they seemed fine Returned the tower and reconnected it and nothing Pulled the tower and checked it again Still seemed fine Reconnected it and she fired up but no POST The fans come on and I can hear the HDDs spin up and run The HDD light comes on and stays on But the monitor never gets a signal The tower doesn t have a speaker and the mobo doesn t have a power light I haven t been able to get any further than that There is one thing that I didn t see mentioned in my Googling Both computer are connected to a DI- router PC is connected to port on the router and that port s light is always on whether PC itself is on or off Since this problem started that light has been off Between my earlier progression in restoring power and this clue that the ethernet port is not seeing power I m hopeful that a solution remains I don t recall bumping anything inside the tower I certainly didn t drop any tools or anything else onto the mobo while working over it and a multimeter test of the -pin power connector said everything was fine I m now in the midst of trying power-ons while swapping the RAM around but I m expecting that until that light comes on on the router I shouldn t expect anything Any comments suggestion would be appreciated nbsp

A:No POST; mobo probably fried, hoping not

There could be no connection between the light on the router and the motherboard... you have no way to know.
Forget about the router. It is probably a power supply failure.
Try a basic setup... Motherboard, one memory module, power supply, optical drive, Install of boot disk of some kind, or a floppy disk..
Does it boot.
No?
Change memory module
Does it boot?
Do you have power from the power supply? Do you have a simple power supply tester? $10 at a computer parts store.
Test the power supply in another computer, or the power supply from the other computer in your computer.
Is your CD-DVD drive known to be good?
One step at a time. No panic. You will figger it out.
 

http://www.techspot.com/community/topics/no-post-mobo-probably-fried-hoping-not.132907/
Relevancy 28.81%

Hi everyone I am having problems with the sound card on my ACER PC and I asked the people I brought my 2nd hand ACER Veriton 3500v from what they did to the PC re formatting the HDD and loading it up with WIN XP Pro again. Apparently they used a program called KIlldisk that wrote 0?s to the HDD before they formatted it? They formatted it in FAT32 then loaded the op system.

As the sound card etc was working o?k prior to them doing this would it have been possible that using KIlldisk has turned ?off ? some how the sound card etc? And if so how can I turn it back on? I keep getting a msg Multimedia Audio Controller not loaded code 28 can you help.
Kelvin
 

A:On board sound card on an acer veriton 3500v

have you re-installed the sound driver?

also,go into your BIOS set up and enable the onboard sound.
 

http://www.techspot.com/community/topics/on-board-sound-card-on-an-acer-veriton-3500v.131206/
Relevancy 34.83%

I can't get the drive to acknowledge anything. it spins . . .but i believe the IDE connector may be fried. . .and I can't solder is back together or anything. . . .any ideas or options to get information-documents, pics, etc-off this computer??
Thanks
 

A:IDE Connector fried?

i dunno much, but there are 2 IDE slots from your mobo, are you plugged into the proper one? and is your master/slave settings all correct? was it working properly before? do you have smaart enabled? the bios doesnt read it at all? check your bios settings to see if you have it assigned to something other than auto or what it actually is. maybe its something simple.
 

http://www.techspot.com/community/topics/ide-connector-fried.130769/
Relevancy 29.24%

After cleaning my computer free of dust, I reinstalled all the necessary parts to get the computer working again. When I was to put the processor back, I found that:

1) the pins were a little bit bent but I think they bent back in place when i put it back
2) In order to put back on motherboard, i had to remove the processor from the fan and that means the thermal paste was somewhat removed.

So the biggest question I have is: Is re-adding thermal paste necessary? and is this why its been shutting down?
 

http://www.techspot.com/community/topics/just-added-processor-to-board-computer-shuts-down.130693/
Relevancy 34.83%

Can anyone help me please?
I have a fried Seagate HDD with all of my work on it. As you can see there is a fried chip on PCB. I tried swapping PCB for the same one with 3.05 firmware...no luck. It spins, but nothing happens.



Seagate U Series 5
ST340823A
Firmware 3.05

Thank you in advance.
 

A:Fried Hard Drive

Your best bet would be to take it to a local data recovery shop. They should be able to tell you if they can retrieve the data or not.
 

http://www.techspot.com/community/topics/fried-hard-drive.129667/
Relevancy 29.67%

My on board video adapter is non functional. I am trying to replace it with a PCI video adapter but the issue is that I cannot see the screen in order to gain access to the BIOS and disable the on board video adapter. Anyone have any other ideas other than replacing the motherboard?

I have confirmed that the video adapter is broken at the motherboard.

It is a Emachine desktop.

Thanks!

Antil0ck
 

A:On board Video card issues

so you can't see any display?
 

http://www.techspot.com/community/topics/on-board-video-card-issues.128718/
Relevancy 34.83%

HEY GUYS GREETINGS i just joined earlier today im seriously in need of help my friend ask me to fix his pc i tried to replace the memory with mb ddr with his original memory mb and a mb of ram just then when replacing it and turning it on i heard a huge quot beep quot then i immediately shut the pc down then when i check it up i saw i slot, help Fried memory quot black spot quot on one Fried memory slot, help of the memory slot i figured it out its fried up luckily the mobo has two memory slot only one of the slot had been fried i replaced the two mb with the original ones the problems now is that the pc is kinda slow in starting up showing the bios and showing a quot blue error screen quot after and sometimes restarting over and over again i really need your help guys really really need it im counting on this site for any help you can give thanks raj philippines nbsp

A:Fried memory slot, help

You not only fried the memory slot, you have damaged the motherboard
 

http://www.techspot.com/community/topics/fried-memory-slot-help.128594/
Relevancy 28.81%

Hi I own a Intel Pentium D CPU 2.80Ghz running on 2 core processers it is a HP PC m7360n. And Running on Upgrade Version of Windows Vista Home Premium. I have 300watts Powersupply running with Radeon x1600 512MB PRO Version. Then I "want to upgrade to 700watts" Powersupply with out any issues from "300 watts power supply". Is it safe enough to install the powersupply? Also I gotten today Radeon HD 3870 512MB wich is require to upgrade 450 or higher? Is it ok go and head install the power supply? Or can my HD 3870 can or can't? run 300Max which I know is unsafe. :/ I don't want to take any chances. Or not I just goto a local computer store and pay for them to install it.
 

A:Installing 700w Power Supply to Intel 4 Board

I would go ahead and install the new power supply. You should have no issues as long as the new power supply has all the proper connectors your equipment needs such as a PCI-E connector (for the graphics card) and a 700W should. If you are worried about a 700W being too powerful for your old setup, don't be. Your PC will draw only what it needs from the power supply even if you install a 1200W PSU.

Each type of PSU connector can only be connected to its own type and they are keyed so it is hard to install them backwards. After installing all the new power connections, double check the data cables. Sometimes they can get loose by accident when you are installing the other cables.

If you haven't bought it yet, make sure you get a good quality PSU. This is one piece of equipment you don't want to go too cheap.
 

http://www.techspot.com/community/topics/installing-700w-power-supply-to-intel-4-board.96345/
Relevancy 29.67%

Hey all, 2 days ago i bought a sapphire 4850 x2. i wouls just like to know something.

would putting this card in a 680i board be a problem?

would i not see as good of perfprmance as an intel board?

would there be any crossfire conflictions ?

Its an awesome card and dominates all of my games. Its just on crysis 1680x1050 all on very high i get 20 fps. I dont know if crossfire is working in the game or not or if it is a driver issue or if it because of my board.

Your comments a much appreciated
 

A:4850 X2 in a 680i board

probably no conflicts, probably driver issue, try reinstalling or use a modded one like DNA, OMEGA, Xtreme-G
 

http://www.techspot.com/community/topics/4850-x2-in-a-680i-board.127592/
Relevancy 34.83%

The title says almost all but several more things to add. I installed another hard drive and everything was fine until I turned the computer off. When I turned it back on, no hard drive detected in bios again. The hdd's still spin up, but cannot be detected by mobo. Checked power supply while running and all is okay.
The mobo is a p4b533-v that my brother was having trouble getting started. I had it working good for about a month and then, well, here I am. Any suggestions on locating the problem would be greatly appreciated.
 

A:Fried HDD and 2 DVD drives and need some input

This is a very old Motherboard
It was first released in May 2002

It has a 478 Chipset with AGP 4X slot and only ATA connection to Hard Drive

Personally I'd say throw away

But if you are determined, try placing the little jumper on the back of the Hard Drive to either M for master or CS for Cable Select (try one then the other)

If it still doesn't work, try replacing the IDE Data cable, that connects to the Hard Drive
Also make sure that the CD Drive has its own IDE Data Cable, or even just remove the CD IDE cable, in case it's causing problems.

But I prefer the throw away idea

Oh here's your manual too: http://dlsvr04.asus.com/pub/ASUS/mb/sock478/p4b533-v/e1006_p4b533-v.pdf

Note: It is possible that the old Motherboard just can't recognize the new Hard Drive
You could also run "Setup Defaults", check in your manual howto do this
 

http://www.techspot.com/community/topics/fried-hdd-and-2-dvd-drives-and-need-some-input.127510/
Relevancy 34.83%

i attached a midi cable to my sound card, then realized the computer had restarted and was frozen at the intial boot screen and it didnt make it past the "memory test" section. i cleared cmos, all it does now is turn on and the screen displays the microstar international screen and thats it. i disconnected all drives as well and anything that wasnt a necessity. whats your opinion.
 

A:Mobo fried?

The hard drive boot sector may be corrupted
 

http://www.techspot.com/community/topics/mobo-fried.125021/
Relevancy 34.83%

What are the signs of a fried motherboard or PSU?
 

A:Signs of fried m/b or PSU?

Steve Gunn I've read a number of your past threads, and would have to say that you are not very technically minded. Therefore questions like is my motherboard or PSU fried, can be answered extremely easily and quickly

If the Power Supply doesn't startup, try another. If the new one works throw out the old one
If the new one doesn't work either, then it could be a motherboard fault :rolleyes:

Regarding motherboard faults. Usually you are given a sounding beep code, or possibly even a power light. If you don't get either of these (whilst testing with a new power supply - ie above) Then I would suspect the motherboard is highly likely "fried"

Any further help, post more specific fault issues
And just on that word "specific" Make sure that you always create a descriptive Title. The Title you used on this thread was: "Signs of ..." This is not descriptive, and worse still, a large number of your old threads were also not descriptive. Please be more descriptive of your Title in future (I'll keep an eye out ) And also try to be more specific with your questions, ie include actual fault description.

Good Luck, glad this one is totally solved.
 

http://www.techspot.com/community/topics/signs-of-fried-m-b-or-psu.124947/
Relevancy 34.83%

I was having problems in the past where my computer would not May comp have fried turn on and would freeze and if May have fried comp i left for a while unplugged power supply plugged back in hour or so later would work that problem stopped happening But now days May have fried comp ago i needed to put my motherboard plate in because never got it out of old case to put in new one so took everything out of my computer to put it in put everything back together plugged it in and turned it on but when turning it on it would start up for less than a second the lights come on the fans start to spin then would turn off To get that sorta reaction again i would have to turn power supply off from back for seconds and turn on to get the reaction i thought maybe i hadn t plugged stuff in right so about hours ago i unplugged everything again and took it all out gave it a clean put all back together and now when i turn it on i don t get any lights or reaction at all but i do get a little squeak like sound which i think comes from the motherboard and then nothing again again to get that reaction again would have to reset the power by turning off the back again for seconds I have Tested another power supply a thermaltake watt and got same reaction Have tried using one stick of ram in each slot still the same reaction Specs are Asus M N SLI-Deluxe Motherboard Oz Tech Power supply watt XFX Nvidia GT Alpha Dog Corsair x GB sticks less than a week old Any ones help would be greatly Appreciated Thanxs nbsp

A:May have fried comp

Zenosincks said:





You sure the motherboard isn't being grounded via a loose screw? Are you using stand-offs?

Is there thermal compound on the CPU/heatsink?Click to expand...

just checked screws are tight ,and what are stand offs? and what is thermal compound do u mean paste? sorry bit of a noob
 

http://www.techspot.com/community/topics/may-have-fried-comp.124692/
Relevancy 29.67%

I'm looking to build a new system and I'm trying to keep in really compact, but I also want to rock dual monitors. Are there any onboard video chipsets on the market now that will support dual monitors?

Thanks!!
 

A:Dual monitors from on board chipset

Repent...., and Prepare For the Future.....

Not sure really, but depending on the level of graphics performance you are expecting any Nvidia x300, x400, or x500 would provide dual monitor capability at low cost, (50 bucks or so, if you catch a good sale), while leaving you with a much greater selection with respect to choice of motherboard/ chipset combinations. I believe that all Nvidia 8500GT/9500GT video cards have HDCP compatibility so that you could easily drive your high-def TV from them. Either of these cards could most likely be used with a good 350 watt PSU, so there's no need to overbuild/overspend at this level. Avoid the overclocked versions of these cards, they use a bit more power, and it makes more sense to jump to the 9600GT series instead of trying wring more performance out of the lower series of cards

If cost is a factor I suggest purchasing a mobo board with onboard graphics, then adding the video card later. Here again though, spring for the right PSU that will allow you to grow your system. You you don't want to have to buy the PSU twice, if you change your mind about the level of upgrade you'd like to make.

You could investigate this post at Tom's hardware; http://www.tomshardware.com/reviews/amd-780g-chipset,1785-5.html It seems to answer your original question.
 

http://www.techspot.com/community/topics/dual-monitors-from-on-board-chipset.124022/
Relevancy 29.67%

Hi all I ve been struggling with this problem for almost two weeks now I m not able to get any audio from my system It all started when I formatted C in order to install Windows nor audio, neither card No PCI on-board with XP Home Previously I had XP Pro bit but I wasn t happy with that since it gave me some compatibiliy problems with other programs such as Norton Internet Security But - No audio, neither with on-board nor PCI card the sound worked However that s No audio, neither with on-board nor PCI card not the case with XP Home anymore This is my system Motherboard ASRock K S GX Chipset SIS GX on board Audio SIS Processor AMD sempron MHz For the on-board audio I used the latest audio driver from the SIS website but to no avail I tried alternative drivers such as Realtek AC or VIA but no luck The errors I get are pretty much the same that I get with the PCI audio card I just bought since I figured that would fix my problem I guess I was wrong The card I have is a Speed Link SL- -SRD and neither the drivers from the CD nor the latest version from their website works with my computer Here s a list of errors and peculiarities I have come across with both installations I hope you guys can shed some light on these When installing the PCI with option quot install driver and applications quot the set-up initializes and then a green screen comes on Then nothing happens When I opt instead for quot install drivers only quot it keeps saying quot driver is being installed quot and it loads and loads until the bar is full Then nothing happens I can press exit and when I do it says quot successfully installed please restart quot But after restart a message comes on from C-Media saying quot can not find audio chip quot It will usually say quot new hardware found quot too Neither Windows can find the driver automatically then nor does it work when I manually point Windows to the C-media driver from from the folder Usually what happens then is two or three scenarios The computer stalls again when the bar is fully loaded The computer says successful installation but when I restart there s still no audio I get a BSOD stating quot Stop x E xC xF BD B xf D C xF D cmaudio sys - Address F BD B base at F B quot When I check the device manager after the installation with option quot show hidden devices quot on it usually lists the CMI audio driver or the SIS for on-board whichever I ve done but in the properties tab it will says something like quot driver activated but not functioning quot Also there s usually up to new unknown devices listed under quot other devices quot and sometimes one under quot audio devices quot All of them with a yellow question mark beside them After the restart they re usually greyed out but they shouldn t be there at all should they On top of that there s always another gameport showing up which really bugs me What does that have to with setting up the audio One says quot CMaudio quot and the other PCI-Bus How do I find the right drivers for these As usual neither Windows nor the folder seem to provide something functional In the beginning of my installation attempts there was also a greyed out entry found named quot SM Bus Controller quot I could not find a driver for that anywhere even on the net Assuming that this had nothing to do with my audio I uninstalled this entry and since then it has never shown up again Could this bus controller thing be a problem What is it for anyway Well I guess I should mention that whenever I tried to go with the PCI card I made sure to disable on-board sound through the bios and uninstall those drivers And whenever I tried to do the on-board I made sure to uninstall and remove the PCI card Something that both have in common - and maybe that s the problem - is that the drivers are from C-Media Are there any incompatibility issues known regarding C-Media or ASRock Or in conjunction with XP Home When I installed Home I also installed all Service Packs up to Automatic Windows update has be... Read more

A:No audio, neither with on-board nor PCI card

I have onboard sound issues, i use sound cards, use a soundblaster card or a Diamond sound card. Sound blaster and diamond has good drivers. I would go with the sound blaster card first tho.
 

http://www.techspot.com/community/topics/no-audio-neither-with-on-board-nor-pci-card.112234/
Relevancy 29.67%

I was wondering if I would have any problems installing and running a new Geforce 9800 GT on an older Asrock 2Core 1333 DVI-2.66G motherboard? Heres a link to the board.

http://www.asrock.com/mb/overview.asp?Model=2Core1333DVI-2.66G&s=775
 

A:Asrock board & 9800 gt?

It will work fine, just make sure you update your bios when everything is up and running, and to have a good quality 600 watt psu.
 

http://www.techspot.com/community/topics/asrock-board-9800-gt.122823/
Relevancy 29.67%

Hi,
My hard drive malfunctioned so was replaced, i am in the process of installing everything back onto my computer, i am having great difficulty in getting my sound to work.
i've got:
ASUSTeK Computer INC. M3A-H/HDMI (motherboard) with onboard sound ( Realtek HD Audio output)

i have updated all the drivers, checked the bios settings, device manager does not highlight any issues, my speakers are working properly.

i'd really appreciate some help as its driving me nuts!

thanks!
 

A:Realtech on board sound not working

What do you see in the Device Manager
Start->Control Panel->System->Hardware->Device Manager...
Any yellow or red flags?
 

http://www.techspot.com/community/topics/realtech-on-board-sound-not-working.122310/
Relevancy 64.5%

i just found out that my mother board cant be upgraded with a processor faster than 2.1 so i want to install a new mother and then get a faster processor. the thing is i have never built a computer and i dont really know what im getting myself into when installing a new mother board. i just want a mb that i can use all my old parts and upgrade my processor.

specs:
AMD 2400+ @ 2.0
512 DDR ram pc2100
radeon 9600 vid card
80 gb hard drive
AM37L MB
for more info http://www.emachines.com/support/support_info.html?prodName=T2482

i was thinking about getiing a KT600 and then a amd xp 3000+ mb since as far as i can tell it is compatible with all the stuff i have now
 

A:Installing a mother board

Theres a good chance that your Restore discs wont work with the new motherboard and when using XP you usually cant replace a motherboard without doing a clean install of Windows. The old motherboard drivers will keep Windows from loading or make the computer unstable. Replacing a board isnt that hard. Just make notes of where everything goes. The first time I did it I marked every cable with tape. I replaced a board in an eMachine. Physically it worked fine except the front panel connector was proprietary and I couldnt connect it to the new motherboard.
 

http://www.techspot.com/community/topics/installing-a-mother-board.18247/
Relevancy 29.67%

When I'm adjusting my many icons and shortcuts on my desktop, often, particularly when I change resolutions, all of the icons will bunch together in the upper left corner of my screen, requiring me to rearrange them again. As I'm dragging them to the right locations, often the mouse travels across the screen, but the image of the icon has frozen part of the way across. It has transparency. I hold my mouse in place waiting, then after some 20 to 30 seconds, the icon snaps into the new spot where my mouse cursor is positioned. Is this a video card "overload" problem? My video is on-board, as delivered in the machine.

Should I consider replacing this on-board video or do I have another problem? It's been this way since new.
 

A:Is this a video board problem?

Hey tepeco

Does this only occur with the icon moving? Or does it happen with anything else?

Spyder_1386
 

http://www.techspot.com/community/topics/is-this-a-video-board-problem.121396/
Relevancy 29.67%

Hello, no flaming me please hahaha

I bought 2 servers from ebay jsut for fun and to learn with ,

this is what i got

Dual (2) Xeon 2.8Ghz Processors

2GB DDR PC2100 Memory

2x 36GB SCSI Fujitsu 10K RPM Hard Drive

On-Board RAID Controller (raid 0,1)

No CDROM and Floppy


the Mother board model is SE7501WV

when i try to install windows it cant find the hard drives and when i install linux it doesnt boot properly,
before posting i looked all over on how i can disable raid but i cant find anything , can anyone help me ?? i looked in the bios for a raid option but i couldent find anything unless im missing something "/ so any help would be great or pointing me into where i can find the info and i can figure it out .
thank you very much
 

A:Disabling on-board raid help

sorry the model MB is SE7501WV2
 

http://www.techspot.com/community/topics/disabling-on-board-raid-help.121623/
Relevancy 34.83%

Hey I have a HP media center m7650n desktop PC and i took it in to the shop and they told me the motherboard had been fried. It had an ASUS P5BW-LA motherboard in it (specs at h10025.www1.hp.(SPACE)com/ewfrf/wc/document?docname=c00783637&lc=en&dlc=en&cc=us&lang=en&product=3245034, remove the space) Can anyone recomend a good new motherboard to get or should i just buy another of the same motherboard? I haven't changed anything from the stock PC except the graphics card and mostly use the PC for gaming.

Edit: It is running Windows vista 32 bit
 

Relevancy 29.24%

GigaByte Board with Nvidia or Intel Chipset
and which board should i prefer with price
budget 3k
or
should i go for another company like Asus
 

A:Gigabyte Board with Nvidia or Intel Chipset

Reply me urgent
 

http://www.techspot.com/community/topics/gigabyte-board-with-nvidia-or-intel-chipset.119976/
Relevancy 30.1%

hey all

if my mobo's got on board graphics and naturally i want to install a better graphics card so i can game, do i have to disable onboard graphics via the BIOS? if so, how do i do this and what happens after that, do i slot the card in and that's it?

Any replies greatly appreciated
 

A:On board graphics/PCI-E 16x

Most motherboards will choose to use the PCI-e over the on-board video without you having to change anything.

While I personally don't know of any motherboards that do need a manual change, you would have to do so in the BIOS as you expected. If you need more help, let us know what the brand and model of the board in question, and I can find a manual online and step you through it. Or at the very least let you know if you have to even change anything in the BIOS.
 

http://www.techspot.com/community/topics/on-board-graphics-pci-e-16x.119913/
Relevancy 29.67%

Hi all,

Has been a long long time since i've returned to these forums, but i've always got the best advice and info from u guys!

Basically, i am getting confused with the hype of Physx and dedicating a GPU to act fully on Physx.

I have an intel chipset P35 Asus P5KE-E mobo which will support crossfire etc but i am sticking with Nvidia. I currently have a 9600 GT overclocked and want to upgrade to a 280 gtx. Can i whack the 9600 gt into the second (x4) pci express port and dedicate the whole card to physx whilst having the 280 in the pci-e x16 slot??

I'm sure i have read that this is possible but knowing my luck, it has to be in an sli capable mobo?!


Thanks in advance



Jonny
 

A:2 Nvidia Cards on non-sli board (for physx?)

it has to be SLI because ATI and nVidia uses different i think technologies and it works on a different basis
but there is a mobo which will be coming out that supports both Crossfire and SLI
i think intel will do it but i cant remember what model it will be :S
 

http://www.techspot.com/community/topics/2-nvidia-cards-on-non-sli-board-for-physx.119635/