Windows Support Forum

windows reinstall after motherboard change

Q: windows reinstall after motherboard change

If I reinstall windows after I replace a motherboard will It let me register windows again since it is already registered?

Relevancy 100%
Preferred Solution: windows reinstall after motherboard change

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 9.89%

I have recently somehow disabled my windows key. I have tried going to Microsoft and doing the "Fix it" thing for the registry and it does not work. I have tried this numerous times. Could it possibly be the keyboard I'm using? It use to work however with the same keyboard. I use Avast Anti-Virus, Malwarebytes and iObit system care as my general cleaners. Not sure if any of those have a default setting to disable the button. Thoughts / Suggestions please?!?!
 

A:How did my Windows key become disabled?

Do you mean Windows is asking you to activate again? What version of Windows are you running?
 

http://www.techspot.com/community/topics/how-did-my-windows-key-become-disabled.192522/
Relevancy 9.46%

Power outage due to storm. Came back on without pictures and documents. It's an HP desktop. Would a file recovery program work? I've tried some of the instructions online, but they don't work.
 

A:Lost pictures on Windows 7 from power outage

Oh mary; I feel your pain. Were the pics within one folder and now they're ALL missing?
 

http://www.techspot.com/community/topics/lost-pictures-on-windows-7-from-power-outage.217351/
Relevancy 22.79%

As the title says , I accidentally cut a wire between 2 pins (or whatever they are called) and now my PC starts slowing down after 20-25 minutes when I open it. After I restart everything is back to normal but after 20-25 mins its the same again. Is there a way to fix the wire between them or I have to buy a new motherboard? (sry , my english isnt very good. I hope you understood what is my problem) the image is what im talking about ,(the red is the wire) ,I got the motherboard picture from google , so its not mine.
 

http://www.techspot.com/community/topics/accidentally-cut-wire-between-2-pins-in-motherboard.217587/
Relevancy 9.46%

I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).

Thank you
 

A:Do you need more than Windows default tools to check/repair a hard drive?

IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
 

http://www.techspot.com/community/topics/do-you-need-more-than-windows-default-tools-to-check-repair-a-hard-drive.217548/
Relevancy 9.89%

I have a Soundblaster Z on my PC that was working fine until I upgraded to Windows 10 today. Now the sound still works but sounds like there is hardly any treble at all. It sounds like singers in songs are singing in a tunnel or something. You can't hardly make out what the vocalist is saying over top of the background music.

Can someone please help me fix this!?!?!?!?!
 

A:Windows 10 messed up my Soundblaster Z

Not yet maybe. According to Creative's website, drivers for Soundblaster Z will be available in August 2015. It doesn't say exactly when though.
 

http://www.techspot.com/community/topics/windows-10-messed-up-my-soundblaster-z.217435/
Relevancy 9.46%

Following yesterday's worldwide launch of Windows 10, all three major GPU vendors have released new graphics drivers that support Microsoft's new operating system. If you're upgrading to Windows 10, make sure you download and install these drivers soon after launch. ...

Read more
 

A:AMD, Nvidia and Intel release new GPU drivers for Windows 10

Is AMD planning to release Windows 10 drivers for RadeonHD234k cards too? Are those machines stuck with Windows 7?
 

http://www.techspot.com/community/topics/amd-nvidia-and-intel-release-new-gpu-drivers-for-windows-10.217386/
Relevancy 23.22%

Hi . considering that I don't overclock , I don't wanna SLI , im gonna buy cpu I7 4790 4G - 32G ddr (8x4 quad channel) - Windows 10 64bit .What's the best gaming and cheapest gigabyte motherboard on the market ?
 

http://www.techspot.com/community/topics/gaming-motherboard.217380/
Relevancy 9.46%

I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help

Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
 

A:Windows 7 can't connect to internet through Wifi or ethernet cable

Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
 

http://www.techspot.com/community/topics/windows-7-cant-connect-to-internet-through-wifi-or-ethernet-cable.200026/
Relevancy 9.46%

The second quarter of 2015 saw the sharpest decline in global PC shipments in close to two years and once again serves as a reminder that last year's brief resurgence was little more than a fluke.

Read more
 

A:PC shipments continue freefall ahead of Windows 10's arrival

Nobody needs to upgrade every three years now. You can easily hold your hardware for up to 10 years if you really want to.
 

http://www.techspot.com/community/topics/pc-shipments-continue-freefall-ahead-of-windows-10s-arrival.216415/
Relevancy 9.89%

I can not find any DirectX compatible graphics when I try to play the Sims 2 for the Windows XP. Please Help Me! But I do not have any internet though.
 

A:Sims 2 on Windows XP

Try this page for help and then let us know what the outcome is.

http://www.systemrequirementslab.com/cyri?gameName=the-sims-2&itemId=10222&p=r
 

http://www.techspot.com/community/topics/sims-2-on-windows-xp.216418/
Relevancy 9.89%

I have previously on a different PC recorded the stereo mix in Audacity, whilst playing a CD and would get the full frequency range of the CD. On my current PC I now get a 20khz cut off, despite changing the settings (the sample rate and bit despth) on the playback and recording devices in Windows and also in Audacity. Does anyone know why this would be, and if there is any way of correcting it?
 

http://www.techspot.com/community/topics/realtek-windows-20khz-cut-off.216409/
Relevancy 9.46%

Okay so for the past several hours I ve gone through the throes of attempting to get my Asus laptop s built-in webcam to work I took a on laptop cannot Windows 7 webcam the built-in Asus detect my look at Device Manager and had found two items titled quot Base System Device quot or something to that effect I don t quite remember and I thought that one of them would be the webcam Well after searching for the mystery items Hardware ID on Google I had Windows 7 cannot detect the built-in webcam on my Asus laptop discovered that these devices were in fact not the webcam Then I had used the quot Add a Device quot option under Devices and Printers in the Control Panel to try and find the webcam After letting it churn for ten minutes it appeared that Windows wasn t even searching anymore and I was staring at a blank window for nothing The only clue I have about the situation is after running DriverEasy it listed quot USB M UVC WebCam quot as a needed update but it also said quot unplugged quot beside the selection and was highlighted in red After attempting to download and install the driver the program had given me some Packard-Bell webcam driver that is most definitely not correct Packard-Bell still exists This had all started however when I made a clean install of Windows I had just spent the last two days scouring the web digging up my lost drivers and programs that had come with the laptop Everything s been successful save for this one element My webcam is lost somewhere in my laptop I just can t get to it If anyone has any ideas as to what s happened and yes I know it s a possibility the wiring is shot and how to fix the issue please give me any tips that you can I ve done everything possible in my power including trying to find the drivers but you obviously can t install drivers for devices that Windows doesn t even detect Oh before I forget my laptop model is Asus x v B if that helps in any way nbsp

A:Windows 7 cannot detect the built-in webcam on my Asus laptop

Was this laptop purchased with Windows 7 as the OS that was installed on it ? Or did it come with Windows Vista and you just wiped it out and put Windows 7 on yourself??
 

http://www.techspot.com/community/topics/windows-7-cannot-detect-the-built-in-webcam-on-my-asus-laptop.155636/
Relevancy 22.36%

Elitegroup Computer Systems, better known to PC enthusiasts as ECS, may soon kiss the branded motherboard market goodbye. Sources familiar with the matter claim ECS is planning to exit the DIY board market due to shrinking global demand and increased...

Read more
 

A:ECS reportedly set to exit consumer motherboard market

Wow didn't even know these guys were still around I've not touched and ECS board since the athlon 64 days and even then I wouldn't buy one lol.

Not saying they were terrible but I've never been a budget system builder so their products have never appealed to me.
 

http://www.techspot.com/community/topics/ecs-reportedly-set-to-exit-consumer-motherboard-market.215774/
Relevancy 21.5%

My Friend has a HP Pavilion DV2000 Laptop. His display isn't work. Suddenly display gone. But I thought it could be Display problem not a VGA. So, i tried to connect an external monitor and used Shortcut keys to change the display. I pressed fu + F1 or Fu + F2 or Fu + F3 or Fu + F4 up-to F12. But no result.
I couldn't check whether it's a Display or VGA card problem. IS there any other way to check it. in addition to these is there any other combination keys to Change the display to an external monitor. I'm unable to check whether i get login or not. if I can login then i can use Windows Key + P. Then i can select mode. But I'm Unable to anything here. Please help me to find the problem and i have to take it to repairing shop.
Thanks in Advanced
 

A:Change display of laptop to external monitor

It should be the Fn + the key that shows a monitor symbol. If it still doesn't display, the motherboard video processor has failed, and not the LCD Panel
 

http://www.techspot.com/community/topics/change-display-of-laptop-to-external-monitor.168817/
Relevancy 9.46%

Hi all,
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
 

A:Unable to install Nvidia driver and also to play games on Windows 8.1

I'd recommend to do the following:

Perform a clean install of Windows

Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.

Let me know how it goes after you've tried what I've mentioned.
 

http://www.techspot.com/community/topics/unable-to-install-nvidia-driver-and-also-to-play-games-on-windows-8-1.213781/
Relevancy 21.93%

Since pure alcohol, for example pure Isopropyl alcohol and distilled water are supposed not to conduct electricity. What would happen if I dipped a turned-on PCB into it? . What would happen to a motherboard?
 

A:Would a PCB or motherboard be damaged if dipped into pure alcohol/distilled water while turned on?

OUCH ! Your assumptions may be spot on, but OMG why would one try this?????????

There's something called 'leakage' - - current flow when it's not expected.

I was working in an aerospace lab and the the EE had me perform an experiment because I said "the resistivity of the salt water was too low and leakage would trigger the device". So we got a bucket of salt water and dropped the device into the bucket - - precisely 30 seconds later (the designed timeout), the bucket erupted and salt water spewed everywhere [yes, the device was an explosive link].

The trigger point for the explosive was <500ma
 

http://www.techspot.com/community/topics/would-a-pcb-or-motherboard-be-damaged-if-dipped-into-pure-alcohol-distilled-water-while-turned-on.215856/
Relevancy 9.89%

I'm trying to connect my PC and my Asus Zenfone 2 with Bluetooth. When I use the "add a device" wizard on Windows 8.1, my mobile phone is detected, but when I try to add it I get: "Windows doesn't have a network profile for this device".

Also, when I try to detect my computer with my mobile phone, itīs not detected.

I'm using a Trust USB 2.0 dongle Bluetooth adapter (the little one you insert on the usb port) that came with a keyboard and mouse Bluetooth set that I used. Could that dongle be designed only for the bluetooth keyboard and mouse set?
 

A:I cannot connect my phone to my PC (Windows 8.1) with Bluetooth

The Bluetooth device seems fine as it already detected your keyboard and mouse. However, your phone seems not supported with the current Bluetooth device and you might need to take another look.
 

http://www.techspot.com/community/topics/i-cannot-connect-my-phone-to-my-pc-windows-8-1-with-bluetooth.215646/
Relevancy 22.79%

Hello,
I had a dell optiplex 7010 (service tag# 3LLBSW1) computer.
I took the motherboard out of this computer and installed it into a new ATX case.
all went well now I 'm having problems connecting the front panel audio, power switch, reset switch, & HD LED)

the dell connector is different than the cables I got on the new case. can anyone please help me to figure out how to plug these cables into the motherboard.

thanks
 

A:Dell Optiplex 7010 motherboard

Attach photos.
 

http://www.techspot.com/community/topics/dell-optiplex-7010-motherboard.198629/
Relevancy 9.46%

Infinity displays are all the rage among notebook buyers these days. Dell's XPS 13 (2015) was an excellent example of what's possible when it launched earlier this year and now, they're bringing the gorgeous screen to its bigger brother. ...

Read more
 

A:Dell's revised XPS 15 includes gorgeous Infinity display, Windows 10

What's an Infinity screen?... Short answers please, I'm not interested enough to Google it.
 

http://www.techspot.com/community/topics/dells-revised-xps-15-includes-gorgeous-infinity-display-windows-10.213699/
Relevancy 9.46%

Much of the tech press regularly overlooks PCs for wearables, smart homes, and IoT-related topics but, in the real world and to many people, PCs still matter a lot. So, this week's news out of Redmond and Taipei (where the...

Read more
 

A:Windows 10, Skylake & Thunderbolt 3 bring the most compelling reasons to upgrade in a long while

Sorry.
No matter what others think about W10.
THIS is not a reason for an upgrade, if one has a choice.
Stay away from -remote host,-cloud centered OS.
Take your hardware and host your stuff by yourself.
Do not accept crippled OS (what unfortunaly OS X (since making iCloud a default location for files, belongs to).
 

http://www.techspot.com/community/topics/windows-10-skylake-thunderbolt-3-bring-the-most-compelling-reasons-to-upgrade-in-a-long-while.213622/
Relevancy 9.46%

Hi

Thanks for any help in advance..

I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..

I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.

Thanks
 

A:External USB hard drive not recognised on Windows after plugging it into a Mac

Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.

Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)​
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
 

http://www.techspot.com/community/topics/external-usb-hard-drive-not-recognised-on-windows-after-plugging-it-into-a-mac.200827/
Relevancy 9.89%

Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp

A:Windows 7 mouse freezing issues

This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.

http://www.howtogeek.com/howto/windows-vista/remove-old-drivers-after-upgrading-to-new-hardware/
 

http://www.techspot.com/community/topics/windows-7-mouse-freezing-issues.164226/
Relevancy 23.22%

Hi guys

I have an intel DP55WB whitsburg a pair of matched 2gb sticks installed at the moment in slots 1 and 3 and nothing in 0 or 2.

I put a new 4gb stick of IBM ram in and get 3 long beeps and it keeps repeating. Everything goes back to normal when I take out the new stick. It happens in both slots 0 and 2.

Am I doing something wrong? With the new stick do I need to change the placement of my original ram?

Thanks!
 

A:New ram makes motherboard beep

This motherboard has support for DDR3 1333 /1066 MHz DIMMs. If you insert DDR3 1600 it probably will not work. Intel motherboards are famous for sticking to the specifications and not exceeding them. I own 2 Intel Motherboards.

I don't know if this is allowed but here is the Intel Specifications of the Motherboard.
http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dp55wb.html

Make sure you unplug the computer from the wall or the power strip before adjusting RAM DIMMS. All RAM is different. Normally you add it in Pairs to maintain the dual channel functionality. If you don't the RAM will slow down. It is not wise to mix and match different kinds of RAM. This can be related to capacity, latency, SPEED, voltage. Then some RAM may not work with other RAM due to incompatibility with the existing RAM. Some RAM may not work in your motherboard due to incompatibility with the motherboard. Some shorter DIMMS also use a different voltage and you cant mix different voltages. RAM is not just buy it and stick it in.
 

http://www.techspot.com/community/topics/new-ram-makes-motherboard-beep.212524/
Relevancy 9.46%

Ahead of tomorrow's launch of The Witcher 3: Wild Hunt, Nvidia has released a new GeForce graphics card driver that's Game Ready for the open-world action RPG. The GeForce 352.86 drivers are also WHQL certified, meaning they are stable enough for everyday...

Read more
 

A:Nvidia releases new GeForce WHQL drivers for The Witcher 3, Windows 10

Mine were updated hours ago, you just can't beat GFE for this sort of thing (or for game display settings optimisation as far as I'm concerned, it works for me).
 

http://www.techspot.com/community/topics/nvidia-releases-new-geforce-whql-drivers-for-the-witcher-3-windows-10.213202/
Relevancy 22.36%

I get a bit jittery when I'm unplugging cable connectors (these images are just examples, I'm thinking of all types of connectors). What's the best way to safely unplug them?, pull from the cables or from the plastic case. What's your experience?. This pics are just a few examples of connectors. I'm posting this thread about any type of connectors. Thank you.


 

A:What's the best way to unplug laptop cable internal connectors on motherboard etc?

Many simply pull apart. Watch out for the ones with locking tabs though. I don't think you have anything to worry about as long as you take your time.
 

http://www.techspot.com/community/topics/whats-the-best-way-to-unplug-laptop-cable-internal-connectors-on-motherboard-etc.212863/
Relevancy 22.36%

Hello,

I have a HDMI cable for my monitor, with a nvidia graphic card...

but now I have a big doubt, I dont know if my motherboard's graphic card's imput is not working anymore or if its my graphic's card after a FLASHY BLACKOUT today...

my nvidia control panel is not working anymore... whenever I try using VGA or HDMI with my graphic card it doesnt show any sign in the screen... so im currently using my normal VGA motherboard's imput...

I tried using an old graphic card and its not working, I tested the VGA cable and HDMI cable and they are working perfectly...

yet, after I set the graphic card in the slot, the fan it start working, if I unplug the graphic card but leave the curent cable, it doesnt start the fan so I guess the motherboard's imput is working

so idk what's the problem here, I have all the drivers and everythign was working perfectly before the blackout
 

A:Broken motherboard slot or graphic card

Well... its too late and soon for expect an answer but...

I tested my graphic card in an old motherboard and it was working... it didnt load windows cuz of the diferent motherboard but connecting my VGA in my gpu worked, and the HMDI didnt work I guess because it need to be configured after windows loading etc
 

http://www.techspot.com/community/topics/broken-motherboard-slot-or-graphic-card.212639/
Relevancy 23.22%

So I made my first custom build pc recently and my specs:
Motherboard: Z97 GAMING 5
CPU: Intel 17-4790k
GPU: Gigabyte Geforce G1 GTX 970 4GB
Ram: 16gb ddr3

In my MSI software (MSI Command center) it goes around the 85 degrees when I play Battlefield 4 on ultra.
Is the motherboard temp the same as the CPU temp? and is 85 degrees too much?
I do use the stock cpu cooler.
Also I have a 200mm front and a 140mm in the back.
 

A:Motherboard at 87 Degrees?

Download HWiNFO64 and use this software to compare temps. Not saying there is anything wrong with the MSI software, but there is always a possibility that it is not reading the correct temps.
Also, do you overclock? Overclocking will affect the temps, especially if you are still using stock coolers.
 

http://www.techspot.com/community/topics/motherboard-at-87-degrees.212568/
Relevancy 9.46%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 12.47%

I have on same HD-500GB win7 and win xp. I conect another HD-320GB in sata drive. Bios recognize both HD, win 7 too, but win xp recognize only HD-500GB. When I go to disk manager in win xp it's same problem I only see one HD-500GB. Please help me.
 

http://www.techspot.com/community/topics/windows-7-recognize-hd-but-windows-xp-cannot.211791/
Relevancy 22.36%

HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks
 

A:Safe to use ATX PSU on a motherboard with an EATX power connector?

EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
 

http://www.techspot.com/community/topics/safe-to-use-atx-psu-on-a-motherboard-with-an-eatx-power-connector.181034/
Relevancy 22.79%

Current specs
Intel db75en
Intel i5 3rd gen 3450
Gtx 970 amp extreme edition
Samsung evo 120
PSU corsair vs 650
Liquid cooler h50 corsair

Currently they are on LGA 1155 mobo

I just killed my old motherboard
And now I am planning to buy i7 4790k

There are three motherboards I have in mind and all of them are asus z97 series based. Want to buy only asus..
Z97 A
Z97 k
Z97 c

I want to know that whether I should upgrade and get 1150 mobo and new processor or not!

(I have no plans to put dual gtx 970 bt plan to use secondary gfx card (gtx560) as phyx dedicated card)
If yes then
1. Which mobo I should go for and why?
2. Will the old h50 will be fittable on my new board or not!

Any new advise also appreciated!
Thank You
 

http://www.techspot.com/community/topics/motherboard-liquid-cooler-suggestions.210943/
Relevancy 9.46%

Hello I apologize in advance for my almost complete lack of computer knowledge That said my PC was built for me by one of the IT guys at work who has since moved on I can t scare him card Good with Windows 7? graphics compatible up from his last known email addy So I m sort of out there drifting on this stuff trying to find any help I can The PC is connected to the home theater system TV through HDMI About weeks ago and video from the internet stopped producing sound In addition the PC doesn t Good graphics card compatible with Windows 7? play audio dvds anymore And when I click on the samples in the library I can t play them either I m assuming without knowing the graphics card is shot I think it s about four years old I opened up the box pulled out the graphics card I didn t make a note of manufacturer model but my device manager says it s nvidia and the driver is up to date and cleaned it I plugged it back in still no sound I can play youtube videos or stream online content but none of it has sound Does it sound to you guys like I need a new graphics card If so I need a recommendation for a better than average one that is compatible with windows professional something in the range or so Any help would be greatly appreciated Thanks nbsp

A:Good graphics card compatible with Windows 7?

Open up nVidia Control Panel.
Under Display select "Set up Digital Audio".
Verify settings to make sure they are correctly set up to send audio.
 

http://www.techspot.com/community/topics/good-graphics-card-compatible-with-windows-7.210597/
Relevancy 23.65%

Hey Guys plz help me out in finding a Compatible MOTHERBOARD which can be upgraded further
Requirements
I have intel Q6600 Processor Core 2 Quad 2.40 GHz (4 CPUs)( I would like to overclock it)
Navidia 9800GT 1gb
Ram 4GB DDR3

I dnt knw if wifi and blutooth comes inbuilt in motherboad if ys thn also include them.
And also suggest a Compatible SMPS Socket(LGA 775)
 

A:Need a motherboard

What is your current motherboard?
 

http://www.techspot.com/community/topics/need-a-motherboard.209509/
Relevancy 9.46%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 9.46%

Hello all!

I wonder if anyone could help me shed some light on the best process for the above subject.

I currently have a Dell Studio XPS 435MT (Vista 64bit) running two HDD's in RAID 0 (as from factory) I need to install Windows 7 64bit and would like to also install it onto the new SSD I have bought (Crucial 128GB) as an upgrade.

Could I simply take the current HDD's out (after backing up essential data) to keep safe as backup plan and add the SSD into slot 0 and install Windows 7?? Then possibly add say a 1tb storage drive to the system later?

One solution someone has sent my way is to clone the two 500gb RAID 0 drives to a single 1tb drive then install Windows 7 onto the new SSD and have both drives on a multiboot? Could this work?

I have seen/heard many versions of how to go about this install but no real evidence of a true way?

Any help would be much appreciated.

Kind regards,
Poke13
 

A:Dell Studio XPS 435MT - Installing SSD and Windows 7 64bit

It takes 3-500GB drives to give you 1.3TB of storage space because of formatting over-head. 2-500GB drives will be considerably less than 1TB. Keep the 2-500's in a single RAID array and set the SSD as a separate partition for Windows 7
 

http://www.techspot.com/community/topics/dell-studio-xps-435mt-installing-ssd-and-windows-7-64bit.199415/
Relevancy 9.89%

Is there a way to connect a displayport monitor to an IBM style PC? Found a new monitor in my brother-in-law estate and was wonder if there is a way to use it. Thanks for any help
 

A:How can I run a displayPort monitor on a PC using Windows 7

If the monitor and the video card in u'r computer have the same connections, and u have a power cable for it. It should work if it is new as u say. Try it and see. That should not cost anything.
 

http://www.techspot.com/community/topics/how-can-i-run-a-displayport-monitor-on-a-pc-using-windows-7.209543/
Relevancy 9.89%

Hi all I have a problem thats been ongoing for months and I just cant get it solved so im hoping you can help The problem is that whenever someone speaks in teamspeak ventrilo skype insertvoiphere my game volume drops to almost nil This volumes game Windows ducking is not a problem tied to any individual app as ive been through all the individual fixes to no avail such as volume control plugin disabled etc And the fact that every single voip program does it leads me to it being a windows option somewhere I have also gone into the sounds gt communication and have that set to do nothing It still happens It is not just with Windows ducking game volumes game either I tried different games and the sounds on every single one duck out when someone talks Also another note it also ducks out when I click to run any program on my pc via admin You know when the box pops up asking you if you want to allow this program to make changes to your computer where you click yes When the box pops up and it goes quot beep beep quot at that exact moment the game volume ducks out note - its only ducking game volumes too it doesnt duck out media player youtube vids or anything like this Please please if anyone can help me solve this issue it would be so appreciated Thanks nbsp

A:Windows ducking game volumes

I'm assuming that you are on Windows 7? Go to the sound icon on the bottom-right of the desktop, right click and select playback devices. Right click on your default device (Either speakers or an integrated chip set normally) and select properties. Go to the advanced tab and make sure that the Allow applications to take exclusive control of this device box is un-ticked.. and make sure that the give exclusive mode applications prioirty is un-ticked, then report back to see if it has worked (Don't forgot to apply and OK the changes).
 

http://www.techspot.com/community/topics/windows-ducking-game-volumes.192988/
Relevancy 9.89%

Hi, a friend of mine has dropped off a Mac HD to recover some pictures for him. He supplied the HD and a ProBox HDF-SU2. This I would think to be plug and play but no matter what I do including swapping to known good USB sockets the ext dive is not being seen. Windows is not even offering to install a driver for the ProBox HDF-SU2. Any help gratefully received. TIA
 

http://www.techspot.com/community/topics/probox-hdf-su2-ext-hd-enclosure-not-seen-by-windows-7.209068/
Relevancy 9.89%

Hi guys, I have set up a RAID 0 array using an XFX Revo64 controller card and the Netcell bios setup that cones with it. According to the Netcell bios the array is working but booting into 8.1 I cannot find the drive in explorer and device manager shows the Revo64 as "Generic Mass Storage Controller ".

I am very new to Raid this is the first array I have tried to setup. Any help would be greatly appreciated

Kind regards,
Jay
 

A:Windows 8.1 cannot find RAID array

Why not use the RAID card as more sata ports and then use windows to make your RAID array? I've never used a controller but im sure that it would work for that purpose.
just go on youtube and find a video on how to setup RAID in windows 8. I know its possible for windows 7 to im pretty sure 8.1 will have it
 

http://www.techspot.com/community/topics/windows-8-1-cannot-find-raid-array.208501/
Relevancy 23.22%

I have a computer that I built and I am pretty sure the motherboard is going out on me... Any suggestions for a new motherboard that will support the parts I already have from my previous build?

MoBo - thats going out - : ASUS Crosshair IV Extreme AM3 AMD 890FX SATA 6Gb/s USB 3.0 Extended ATX AMD Moboo

Processor: AMD Phenom II X6 1100T Black Edition Thuban 6-Core 3.3GHz, 3.7GHz Turbo Socket AM3 125W Desktop Processor

Hard Drive: Seagate Barracuda 7200.14 ST3000DM001 3TB 7200RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive

Memory: G.Skill Ripjaws X + Turbulence II Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9Q-16GBXLD

Videocard: EVGA 02G-P3-1386-KR GeForce GTX 460 (Fermi) 2GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card

I built this thing around 2011 so any suggestions for something new that will work for me?
 

A:Motherboard for my build

Take a look here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007625 600158776
 

http://www.techspot.com/community/topics/motherboard-for-my-build.208651/
Relevancy 23.22%

Greetings. I have an Asrok Z77 Extreme 6 Motherboard.

I currently have an I5 3570K in there. I believe my Mobo is LGA 1155.

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.

Not sure if I will see any real increase in performance. I over clock the I5 to 4.2.

Any advice is welcome.
 

A:Question about my motherboard

Larsenex said:





Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.Click to expand...

Sorry, no. While your motherboard does have socket 1155, the processor i7 4790K is socket 1150. You'll need a new motherboard.
 

http://www.techspot.com/community/topics/question-about-my-motherboard.208311/
Relevancy 21.93%

Okay so I am starting this thread here seeing as how Clock and A10-6800K AMD Motherboard Wrong Setting Voltages Speeds the topic of the old one no longer applies to this situation I jumped ahead of myself trying to overclock this CPU which made me question the frequencies and voltages which are supposed to be set automatically by the motherboard I am having a tough time understanding all this I will post links to the exact AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds parts I am AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds using so whoever is keen enough to try to help will know what we re dealing with Motherboard MSI A X-G Gaming CPU AMD A - K Richland GHz Turbo Black Edition RAM Mushkin Enhanced Blackline DDR MHz PC V CPU-Z Screenshots After doing some AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds reading in regards to overclocking I have found out some details which are totally incorrect in my case For starters the FSB to DRAM Frequency Ratio from what I read is supposed to be some reported slightly higher ratios or something similar but CPUZ is showing which sounds absurd Also it s reporting the RAM as PC - at MHz and voltage at I haev Intel XMP enabled on the motherboard and the motherboard reports memory speed in BIOS at DDR- MHz Can someone analyze the above shot and information and clue me in as to what is wrong and what needs to be done I would really appreciate it because I am baffled I have no clue what the CPU-NB frequency and voltages are for so I don t want to mess with something I don t know anything about Anyway any and all help is much appreciated as always nbsp

A:AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds

Go into the BIOS and change the DRAM voltage to 1.60 or 1.65V and set the timing as u see XMP-2132
 

http://www.techspot.com/community/topics/amd-a10-6800k-motherboard-setting-wrong-voltages-and-clock-speeds.208183/
Relevancy 23.22%

Hello All I am having a bit of a strange issue that I have with CPU Motherboard or Strange issue never run into before Yesterday after getting home from the store I booted up my PC and started to play a game although I noticed that I was getting framerate stuttering It seemed to keep dropping a lot throughout my play So I started taking a look at some of my sensor utilities Strange issue with CPU or Motherboard When I opened Asus Probe II I noticed that it was telling me that one of my chassis fans weren t running Okay no problem it must have gone bad I than took at look at the frequency and noticed that my AMD FX- was only running at GHz per core I also checked CPUZ and had the same results So I booted to the bios just to take a look and noticed that it show my Chassis fan WAS running fine and that my frequency was at GHz per core as it should So I though that it must be a fluke Booted back into windows and again same issues So I shutdown and took the side off my case which is also where the Chassis fan it said was running is located Turned the computer back on and noticed the fan was running fine I logged into windows and noticed that seconds after windows logs in that one chassis fan turns off and the CPU underclocks to GHz multiplier All of the other fans in my case still running perfectly GPU running fine HDD s running fine Could it be possible that Asus probe II itself is underclocking my CPU If so what would be causing the fan to shut off My first thought was power-supply but I have no issues when stressing my hardware even in this state I am an IT consultant but have not run into this issue before Any help would be greatly appreciated PC Specs- ASUS m a r Motherboard AMD FX- CPU CoolerMaster HYPER N CPU Cooler Kingston HyperX Blu GB x Galaxy Geforce GTX Ti OC w PowerSupply Cougar Evolution Full Tower Case Samsung gb SSD Let me know if you need any other information nbsp

A:Strange issue with CPU or Motherboard

CPU temperature too high?
 

http://www.techspot.com/community/topics/strange-issue-with-cpu-or-motherboard.203184/
Relevancy 23.22%

Hi, I have a MSI g31m3 v2 s-7529 motherboard and wont turn on.
I change the power supply
I put on some themical paste in the cpu
I put away all hard drivers
but didnt work, only the fan turn on then its turn off
I think the motherboard dosent work.
 

A:Motherboard wont turn on

Please provide list of make and model for everything you have for this setup (CPU, RAM, GPU, Hard Drives, Optical Drives, Power Supply, Aftermarket coolers, etc.). We need to make sure that you have all compatible parts.
Also, have you tried to disconnect all things except the power supply connection to the motherboard, CPU & RAM and see if the motherboard starts?
 

http://www.techspot.com/community/topics/motherboard-wont-turn-on.208015/
Relevancy 22.36%

Wanted a gaming config ...
I have GCARD > NVIDIA GEFORCE GTS 450 (ASUS)
I NEED a good motherboard for gaming with intel core i3 4160.... 3.6ghz ,lga1150
my options are :
gigabyte/asus
B85 M D3H (or other b85 variants)
H87 M D3H (or other h87 variants)
H97
H81

all above are compatible but its really difficult 2 choose as the differences
even among same chipsets are too close(eg there are variants under same
h87)

all the above boards r in my budget!

games downloaded:
watch dogs ,cod(adv warfare,ghosts),max payne 3,MOH (warfighter),FAR CRY 4,ASSASINS CREED UNITY,Crysis 3 ,Dead Rising 3 ,Dead Space 3 ,GTA,LA Noire,Middle-earth: Shadow of Mordor,Need for Speed Rivals ETC ETC (thank god PIRATE BAY is up agn from COSTA rica)
 

A:Suggest motherboard for nvidia GTS450 & i3 4160 (gaming)

I would go for either the H87 or H97. It is really your choice in the end but all of the ones listed are good. ASUS, Gigabyte, and Asrock are all good board manufacturers.
 

http://www.techspot.com/community/topics/suggest-motherboard-for-nvidia-gts450-i3-4160-gaming.207743/
Relevancy 9.46%

hi guys wish you all a great new year.

im facing a very annoying issue with my laptop, some keys are not working, the left **** and the windows key I just don't know whats happening.

can someone please help mw with that.

thanks in advance.
 

http://www.techspot.com/community/topics/dell-inspiron-7537-shift-and-windows-key-not-working.207933/
Relevancy 9.46%

I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.

Any suggestions?
 

http://www.techspot.com/community/topics/i-hear-windows-startup-but-after-that-nothing-headphones-work-though.207890/
Relevancy 23.65%

Not sure if this is only confusing to me, but why are there so many different versions of X99 boards by EACH manufacturer?

I'm looking at Asrock, they have about 10 models: http://www.asrock.com.tw/microsite/IntelX99/

Then I'm looking at MSI and there are 6 models: http://www.msi.com/product/mb/#?category=Socket 2011-3&category_no=1179

SERIOUSLY, how to choose?
 

A:Which X99 Motherboard?

There are several ways you can choose a motherboard, but I personally look at the brand first before looking at features because some manufacturers are more reliable than others. I personally like ASUS and Gigabyte but ASRock and MSI are alright also. Now, onto features. There isn't really much you can differtiate between motherboards of the same chipset since most features are largely unimportant to the regular consumer. Usually the more expensive boards have more "features", whether relavent/important or not, is up to the buyer. I would check out this link.

If you still have questions, please ask.
 

http://www.techspot.com/community/topics/which-x99-motherboard.207791/
Relevancy 9.89%

Ive got a 2 yr old laptop that my parents bought for me at walmart of all places. I basically just use it for facebook, facebook games, and email. havent had any real issue til now. at first, when it was plugged in it would start up and let me log into windows but would immediately shut down. later it started going through a disk check when I turned it on and would shut off before it was complete. if the power cord was connected it would have a big red x over the power cord logo on the bottom right. I was going to factory reset it but I cannot get that far before it shuts off. bettery is fine and power cord is good. had them both tested. PLEASE HELP!!! IM VERY POOR SND CANNOT TAKE IT TO A REPAIR SHOP!! tyvm
 

A:Hp laptop w/ windows 7 trouble

It won't stay on long enough to do anything so this doesn't look promising. Have you tried removing the battery and just using the power brick?
 

http://www.techspot.com/community/topics/hp-laptop-w-windows-7-trouble.207751/
Relevancy 9.89%

I am trying to set up my Windows Xp computer as a VPN server I have taken the initial steps I get to the Accept Xp setup VPN hanging server Windows incoming connections screen and click okay The computer hangs for about a minute or so and then comes up with the following message Incoming connections depend on Routing and Remote access Windows Xp VPN server setup hanging service which was unable to start For more information check the system event log I presumed I had to go to control panel performance and maintenance Administrative Tools Event viewer I have already made sure that Routing and Remote access are enabled as well as Telephony I could not find Netbios in the services list and don t know where to Windows Xp VPN server setup hanging look for it Also when I try to start Routing and Remote access service manually I get the following message Windows could not start Routing and Remote access on local computer For more information review the System Event Log If this is a non-Microsoft service contact the service vendor and refer to the service specific error code- Can some one give me a step by step walk through of how to resolve this issue so I can connect to that computer from work over the internet nbsp

http://www.techspot.com/community/topics/windows-xp-vpn-server-setup-hanging.207658/
Relevancy 9.46%

Hello guys,
This is my first thread here, and my english is not that good also, so excuse me for any mistakes
I have my Prestigio PC for a 5 years and there were no problems. But today when I started the PC, a error occured.
On starting screen(American Megatrends GUI) there was written: "Primary IDE Slave: Not Detected" and after a few seconds my screen went black and "reboot and select proper Boot device or insert boot media into selected boot device and press a key" message appeared.
So I thought that I will just need to put my Win 7 CD to the CD-ROM, but then I found out I lost it while we were moving.
My BIOS is also saying that Primary IDE Slave is not detected
Is there any way to solve this problem? Is there any way to boot Win from USB?
Thank you for answers

Have a nice day!
 

A:Primary IDE Slave Not Detected on Windows 7 Ultimate

Open up the computer, check that the cables are properly 'seated' (pushed in all the way) on the drive and on the motherboard. I know you said it has worked for several years, but for it not to boot with the Primary IDE Slave not connected the only way that makes sense for this to happen is if the optical drive is jumpered to Master and the hard drive itself to Slave. That is a bit unusual. You typically would have your hard drive as Master and the optical as Slave. It doesn't really matter, as evidenced by it working in the past, it just isn't a 'normal' setup.

If the cables are seated properly (power and data), your drive could have failed.. 5 years is a decent lifespan for a hard drive.

You can make a bootable USB for Windows 7, although you can't without a working computer.
 

http://www.techspot.com/community/topics/primary-ide-slave-not-detected-on-windows-7-ultimate.207604/
Relevancy 9.89%

Hey guys, I was recently in the malware section, because my laptop had some problems and could not connect to the internet. Broni was very awesome and helped me clear my laptop up, but we still couldn't get it to connect to the internet. He advised me to come here for help.

I will link the previous thread, because there are some log files toward the end I think would be much more helpful than me explaining problems.

http://www.techspot.com/community/topics/infected-laptop.206911/page-2#post-1444892

Thank you so much for any help.
 

A:Trouble connecting to internet (Windows 8)

Can you try to re-install the WiFi driver?
 

http://www.techspot.com/community/topics/trouble-connecting-to-internet-windows-8.207500/
Relevancy 22.36%

This is my configuration:
GPU - ATI Radeon HD 5770
STOCK COOLER
MONITOR 1280X1024 4:3 Ratio
CPU - AMD FX-8320
Motherboard - Asus M5A97 R2.0
RAM - Kingston HyperX 2 x 4 GB DDR3 1600 MHz
Hard Drive - Western Digital 1TB Blue SATA3
PSU - Thermaltake Smart SE 530W

Now, what should I buy:
1) New cooler - Probably the COOLER MASTER HYPER 212 EVO
2) New GPU - any good suggestions?
3) New Monitor - any good suggestions?

I'm using it for video rendering and gaming.
 

A:What should I change on my PC with $250?

I would not worry about the CPU because it is a decent processor. The cooler I would not worry about unless you are overclocking the CPU. If you are then yes, get the Cooler Master Hyper 212 EVO. It will bring the temps down a good amount over the "Stock" cooler. I would suggest getting a monitor (something with Widescreen and 1920x1080 resolution). You could probably get a decent monitor for around $100 to $150, then look at getting a better graphics card. You may have to save a little extra money for the graphics card, but it will be worth it in the end.
 

http://www.techspot.com/community/topics/what-should-i-change-on-my-pc-with-250.207425/
Relevancy 9.89%

This all started after I reset the router putting in new pass code I m using same name of the old SSID When you click to Windows SSID was to unable connect on the wireless network connection on the name of my SSID on connect it saying Getting information from SSID this sounds like Windows was unable to connect to SSID good thing that windows can see the router and talk to it Type in the network key same thing looks like windows can see the router and talk Windows was unable to connect to SSID to it I type in the network key and OK Than it is saying windows was unable to connect to SSID name I have set up other computers and it can connect but this one computer running windows cannot I have the pass code down on paper and other computers can connect So wrong pass code is not the case The only thing I can think of is is computers using the old profile or my network card may need to be reset When I open networking sharing center and click on manage wireless networks I removed the old profiles in the list But I m not sure if there is still some kind of conflict or the old setting still there some where Well because I m using the same SSID despite the router reset and new pass code I m not sure why I cannot connect unless Windows was unable to connect to SSID the windows thinks I m connecting to the old SSID I tried to restart the computer and no change nbsp

A:Windows was unable to connect to SSID

Force the system to forget that SSD and then reboot.
Now look for it again and enter the passphrase.
 

http://www.techspot.com/community/topics/windows-was-unable-to-connect-to-ssid.207365/
Relevancy 22.36%

Please somebody help me asap I tried to change the public Dns to google's one but failed to do so now I cant reverse it I clicked auto obtain IP and Dns but still cant connect to my router, I beg you somebody help me.
 

A:DNS change failed

I'm far from an expert on anything internet, but I had a similar experience when Verizon changed servers on me, and my router failed to track it.

I called Verizon tech support and they reconfigured the router for me while I was on the phone.

You can also try opening a command box and type, "ipconfig/release", wait a few moments and type, "ipconfig/renew" (obviously without the quotes). That will only work if the issue is with the computer, but not the router.

Don't despair though. Someone who actually knows what they're talking about could be along any minute...
 

http://www.techspot.com/community/topics/dns-change-failed.207375/
Relevancy 9.46%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
 

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
 

http://www.techspot.com/community/topics/windows-7-computer-says-connect-via-ethernet-and-ping-confirms-but-cannot-get-to-any-page.207373/
Relevancy 9.03%

I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
 

A:Recovering Lifelong Memories from Windows Recovery-Wiped External Hard Drive

There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
http://www.ylcomputing.com/content/view/350/153/
Obviously it's worthwhile trying both of them.
 

http://www.techspot.com/community/topics/recovering-lifelong-memories-from-windows-recovery-wiped-external-hard-drive.207350/
Relevancy 9.89%

Hi I had this problem a DVD-R 7 Won't Windows Vaio read - couple months ago fixed it and am now facing the same problem again I have a Vaio Windows My CD DVD player isn t reading any of my DVD-R cds Whenever I put in a DVD-R cd autoplay comes up and it asks to format the cd I checked these DVDs and they work on other computers They re all burned DVD with files on them Before when this happened I tried many different things I Deleted upper lower filters -- Actually I didn t have upper or lower filters to delete System restored Deleted and updated drivers Finally found a post talking about creating a new key in the regedit NoCDburning After doing this it started working Fast forward three months later my cd dvd player won t read any Vaio Windows 7 - Won't read DVD-R of my DVD-R cds again I did the same things all over again System restored Deleted and updated re-installed drivers Ran Fixit Looked for upper lower filters -- not there Tried looking at the NoCDburning thing again -- deleted and repeated the steps and nothing is happening I don t want to reboot my computer because I already did a month ago and it just takes way too much time for me to reboot everything all over again I cleaned my CD player as well like most of you guys said before I know my drive is still working as it worked before after I fixed it I checked and the last time this happened was in June Since then the only new things I installed updated were CC Cleaner Itunes and some other programs I have Spybot as well Can someone please please please help me I ve been looking for an answer everywhere and I m running into the same answers Thank you nbsp

A:Vaio Windows 7 - Won't read DVD-R

Have you tried a a system file check to see if Windows can sort this issue out?
sfc /scannow (in admin mode.)
Also if you just explore the DVD do you see the list of files on it? Or is the DVD-R not 'seen' by Windows at all?
Or is the error only with the autoplay part? (Windows trying to help you choose a media player from whatever you have installed?)
 

http://www.techspot.com/community/topics/vaio-windows-7-wont-read-dvd-r.206920/
Relevancy 21.5%

Hello all,

I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
 

A:How to change the Wifi password of an ADSL modem without a computer

Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
 

http://www.techspot.com/community/topics/how-to-change-the-wifi-password-of-an-adsl-modem-without-a-computer.207093/
Relevancy 23.22%

I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp

A:Not a bad motherboard or PSU. Still won't power up

Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
 

http://www.techspot.com/community/topics/not-a-bad-motherboard-or-psu-still-wont-power-up.151315/
Relevancy 9.46%

Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp

A:Clean install Windows 7 - FN Keys (Touch/slider) not working

Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.

That'll teach you to mess with Windows when a cd/dvd plays up.
 

http://www.techspot.com/community/topics/clean-install-windows-7-fn-keys-touch-slider-not-working.207046/
Relevancy 9.46%

Hi,
My USB drive is enabled. The USB flash drive or any other storage device is recognized when connected to my laptop. But when I click on the drive in windows explorer, it says access denied. The same works fine in other laptops. I have admistror previlages. There is no local group policy set up on Removable storage access. I have searched multiple forums and tried out various options, but still cant connect to my USB drive. The drivers are successfully installed and are the latest. This happens even when I connect my camera or mobile phone. It shows up as 'Removable Disk' in windows explorer, but cant access it. I have given authorization to the drive as well. Please help.
Dnana
 

http://www.techspot.com/community/topics/usb-flash-drive-is-recognized-but-still-cant-acess-windows-7.207068/
Relevancy 23.22%

A time ago I was plugging in to many USB devices at the same time. I had received a message saying that a power problem had occurred. Since then I have been unable to use the two ports, and I have looked up multiple guides on how to fix this. Nothing has worked, and I have run out of options. I do not have the disk anymore for the drivers.
 

A:Universal Serial Bus on MotherBoard

Just a note to any one, Keep the driver disk, not that would have helped, but there is always a chance u might need to reinstall the operating system.
 

http://www.techspot.com/community/topics/universal-serial-bus-on-motherboard.206796/
Relevancy 23.65%

Hello all

I have a HP Pro 3405 Microtower PC and I recently reinstalled Win 7 Ultimate.
Now I did a very stupid thing, I managed to install a DDR 2 1GB RAM on a DDR3 DIMM slot, don't ask me how but I did. There was also a DDR3 2GB RAM already there.

I quickly took out the DDR 2 and restarted the system, since then I've been getting 5 beep at startup which means "pre-video memory failure". I reseated the RAM, nothing changed. I looked on google on how to fix it but nothing worked.

I ordered another 2GB RAM from Offtek, same specs as the original RAM stick.
When I tried to install it today, it still was giving me the 5 beep code.
I've tried reseating it, resetting the BIOS, taking out the PSU... nothing >.<

Have I fried my motherboard? Or is there a solution I haven't tried yet?

Thanks in advance
 

A:RAM 2x 2GB on motherboard

If you have tried all that you speak of, sounds like you really messed up your motherboard. I don't think there's much you can do. Maybe if you know what form factor the motherboard is, you can replace it with one like it. If you don't know more then how to replace the RAM in a computer, I would not recommend going strait to replacing a motherboard.
 

http://www.techspot.com/community/topics/ram-2x-2gb-on-motherboard.205839/
Relevancy 22.79%

Hey guys, building a new PC, and I decided not to go too cheap with core components and leave the video card until later, while still getting everything in one go. Now this being the case, I will need to run non-dedicated graphics for a while (which are decent nowadays). Anyway, I want to go with the Gigabyte GA-F2A88XM-D3H Motherboard and an AMD A10-6800K Richland CPU,

Will the video outputs on the motherboard work with the APU and will I be able to use integrated video until I get a dedicated video card?

The Newegg page for the motherboard says "Integrated Video: None", so I am a little bit confused, is there no integrated video chipset because that's what the CPU is now being an APU?
 

A:AMD A10-6800K with what motherboard for integrated video?

I just built a home office build system for my parents using that exact board with an A4-6300 Richland in a Cooler Master HAF 912 (I really like this case for microATX boards). The board was great to work with and since the APU is on the chip itself my folks didn't need to purchase a video card.

So to answer your question: Yes you'll get your video.

* I would seriously consider getting an aftermarket cooler to replace the heatsink that comes with it.
 

http://www.techspot.com/community/topics/amd-a10-6800k-with-what-motherboard-for-integrated-video.205551/
Relevancy 23.22%

Hello I upgraded my cpu a while ago without checking if my mobo could run it.. worked fine on low usage but when I tried to stress the Cpu the pc died and wont boot/post. Is it the cpu or motherboard that takes damage from this? (Or both?)
I tried with my old cpu but with same result.
/ Andreas
 

A:125W cpu on 95W motherboard

Can you link us to your motherboard, your new cpu and your old one as well?
 

http://www.techspot.com/community/topics/125w-cpu-on-95w-motherboard.206146/
Relevancy 22.36%

Hi,
So I have noticed my pc would shut off randomly and its because the 24 volt connector wasn't in all the way so when the pc would move slightly the connector would disconnect itself. When I go to push the 24 volt in all the way it wont clip onto the clip on the motherboard. It will stay in but it wont fully go in and I can easily just pull it out or it will just fall out from movement. Any ideas how to fix this?
Motherboard- http://www.newegg.com/Product/Product.aspx?Item=N82E16813130741
PSU- http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026
 

A:24 Volt connector wont fully connect to Motherboard

I think it is not 24 volts. it is a 24-pin(also labelled as 20+4pin) , 12volts main power connector.
the slots are designed so that the power connector will slide into the slot to form like a 'lock and key'. to remove it.
see to it that the power connector is inserted in the right direction as shown in the pics (towards the side):


edit, any moderator: please delete this post.
(my second post to this thread is more 'presentable')
 

http://www.techspot.com/community/topics/24-volt-connector-wont-fully-connect-to-motherboard.206189/
Relevancy 22.79%

Just bought a new board and I dont know how to get my geforce gts450 card working
 

A:New motherboard failing to show my card

Have you installed latest NVidia driver pack compatible with your operating system?




www.nvidia.com/Download/index.aspx?lang=en-usClick to expand...


 

http://www.techspot.com/community/topics/new-motherboard-failing-to-show-my-card.206126/
Relevancy 21.5%

I have a Dell Latitude D630 and the motherboard died, It's out of warrenty so I bought a Motherboard on ebay. The Bios Service Tag does not match the number on the bottom so I would like to chage it to the correct one. How can I do this?

I read about a DST CD = Dell Service Technician CD that has this option but I can't find one.

It's not a real important thing but when I use the Dell System ID application it reads the Bios Service tag and not the real system tag that Is registered to me.
 

A:How to change the Service Tag in a Dell Latitude D630 BIOS

http://en.community.dell.com/support-forums/laptop/f/3518/p/19258463/19430485.aspx
 

http://www.techspot.com/community/topics/how-to-change-the-service-tag-in-a-dell-latitude-d630-bios.165117/
Relevancy 9.46%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
 

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
 

http://www.techspot.com/community/topics/windows-installation-cant-detect-my-ide-hard-drive.192208/
Relevancy 23.65%

Hi, i currently have 2 x 1GB sticks of ram in my motherboard at the moment and wondered if i could buy a 4GB stick of ram and use it in conjunction with one of my 1GB sticks of ram, is this possible?
 

A:RAM 1GB & 4GB on motherboard

What are the specs of your pc? how many ram slots do you have spare?

DDR memory must be used in identical pairs for it to operate in dual channel mode. also if your using a 32 bit operating system only 4GB of memory will ever be used by your system.
 

http://www.techspot.com/community/topics/ram-1gb-4gb-on-motherboard.172809/
Relevancy 23.65%

So Im looking for a new motherboard here are my current specs MSI H a Looking Motherboard new for M-P LGA Intel H SATA Gb Looking for a new Motherboard s USB Micro ATX Intel Motherboard Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR Looking for a new Motherboard SDRAM - PCI Express x Intel Core i - K Haswell Quad-Core GHz LGA W Desktop Processor Intel HD Graphics BX I K G SKILL Ripjaws X Series GB x GB -Pin DDR SDRAM DDR Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR SDRAM - PCI Express x So this was my first build and it went great did make the mistake of getting a micro ATX and I have a massive case things that bother my about my current motherboard is that I dont have enough SATA plugs I have alot of hard drives and second I just got monitors and it only has PCI plug So Im also thinking about getting another graphics card to run of my monitors and having my current one run the other I was thinking of getting another GT but I do have a gtx sitting around would they work together Also if you have any advice about changing motherboards and not having to re-install OS clean that would be great nbsp

A:Looking for a new Motherboard

Well you also made the mistake of buying the GT 640 because the gtx 260 is fair amount faster.
 

http://www.techspot.com/community/topics/looking-for-a-new-motherboard.205517/
Relevancy 23.22%

Hi, I'm building a budget gaming PC but I don't know what motherboard to get. Here's the parts I'm planning on buying:

Intel Core i5-3570
Corsair Builder Series CX 430
Radeon HD7850

A H77 board will do as the cost of a K cpu and Z77 board (I presume) would cost way more. I'm thinking something around the price of a Asus P8H77-V LE.

Thanks
 

A:What motherboard should I get for my build?

It matters on what brand you buy. Some H77 motherboards come close to low end Z77 boards. Also, the 3570K is just $20 more and allows for you to unlock your system fully as long as you have proper cooling.

If you would like, I can take a look at your build and recommend better components if I see it fit. Just provide me with a budget .
 

http://www.techspot.com/community/topics/what-motherboard-should-i-get-for-my-build.203630/
Relevancy 23.22%

Please suggest me a best motherboard (upto Rs. 6000) and a PSU for AMD FX-6300 processor.
 

A:Motherboard for amd fx-6300

Why not try the MSI Gaming 970 motherboard, its pretty inexpensive and a decent motherboard. Where do you shop?
 

http://www.techspot.com/community/topics/motherboard-for-amd-fx-6300.205255/
Relevancy 9.46%

Hello...I will start from the begining .

I bought the Acer V5 and tried booting it up...it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.

Petar
 

http://www.techspot.com/community/topics/acer-v5-booting-windows-installing-issues.205294/
Relevancy 23.22%

I have an old Acer Aspire m3100 desktop and the case to it is broken, I have another case for it but I do not have the installation manual to show me how to reconnect all of the connections from this other case. How can I get or find the diagram showing how to make all connections to this motherboard. I'm trying to restore this computer for my grandson? any help would be appreciated, I've tried contacting Acer but they won't help unless the computer is under warranty and their third-party support doesn't do hardware issues?? I also downloaded a manual from online but it doesn't show the right info.
 

A:Motherboard Installation manual

Check this is the right motherboard.

http://www.gigabyte.com/products/product-page.aspx?pid=2500#ov

The manual is available in the support and downloads section.

Case wiring is pretty standard in most cases (no pun intended). Any details you have about the case your switching to would be helpful.

Motherboards mostly have the names of sockets screen printed next to them.
 

http://www.techspot.com/community/topics/motherboard-installation-manual.205022/
Relevancy 9.89%

I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
 

http://www.techspot.com/community/topics/trying-to-install-nvidia-quadro-nvs-259-on-windows-7.204678/
Relevancy 22.79%

Hi, I just installed a gigabyte ga-z77x-d3h into my system (i5 3570), and even after reinstalling windows the computer is very glitchy, it takes ages to come on, freezes, and usb devices don't work half the time.

I'm thinking it's a dodgy motherboard. Any ideas?
 

A:System is very glitchy after installing new motherboard

Actually my first post was wrong, (this is someone else's computer) reinstalling windows fixed the glitches it just pauses on the windows logo for about five minutes before booting up.
 

http://www.techspot.com/community/topics/system-is-very-glitchy-after-installing-new-motherboard.204643/
Relevancy 22.79%

I got this desktop computer that has a Asrock board in it Model # FM2A75M-DGS and it comes up with the boot screen and I try to get in to boot settings or anything and it wants a password. I have no clue what the password is and I need help to see if it can be reset. I have looked on the internet everywhere and have had no luck. If I pull the battery will that reset it......help me please. Thanx
 

A:Forgot Password On Asrock Motherboard

Removing the motherboard battery and waiting a couple minutes before replacing it should reset it to where you can gain access again. It should help you. If not then reset your jumper to clear the CMOS. You can get the jumper resetting instruction in the motherboard manual.
 

http://www.techspot.com/community/topics/forgot-password-on-asrock-motherboard.204604/
Relevancy 22.79%

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping
 

A:Upgrading CPU, question about motherboard compatability

Vidosoli said:





Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping Click to expand...

No, that motherboard is LGA 1156 while the i5 4670 is LGA 1150. You would need a new motherboard to go with that CPU>
 

http://www.techspot.com/community/topics/upgrading-cpu-question-about-motherboard-compatability.204453/
Relevancy 23.22%

Hi all,

I have heard of somethings like computer manufacturer and motherborad manufacurer. For example some time ago, when I had problem with my desktop PC, some asked me what's your computer manufacturer and motherborad manufacurer?
what's the difference between these two please?
 

A:Computer/motherboard manufacturer

Computer manufacturer Is most of the time is Dell, Hp,Compaq, Ausu are a few.
Motherboard manufacturer . Asus, Gigbyte, Asrock. Msi, Are a few. This is what they are referring to. When they ask you those Questions .
 

http://www.techspot.com/community/topics/computer-motherboard-manufacturer.204218/
Relevancy 23.22%

In hardware monitor, reading 13.2v on the 12v line.

PSU: http://www.newegg.com/Product/Product.aspx?Item=17-151-107

MOBO: http://www.newegg.com/Product/Produ...30790&cm_re=970_gaming-_-13-130-790-_-Product

Should I be worried? BTW im already about to RMA the motherboard because of broken sound. (might these be related?)
bbasically should I be worred about the immediate health of other parts or something
 

A:12v on motherboard reading 13.2v

What does your boards BIOS voltage monitoring read ? When you say hardware monitor I assume you are talking about the utility?
If this is the case then HW Monitor can have reporting issues with certain chipsets and boards.
If you're reading the voltage from the BIOS's hardware monitor then it could be a faulty voltage sensor (likely), or a PSU running out of specification. Checking the PSU shouldn't present much difficulty if you have access to a multimeter or just have an electrician test the output.
 

http://www.techspot.com/community/topics/12v-on-motherboard-reading-13-2v.204199/
Relevancy 22.36%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 22.36%

I ve got this legendary socket motherboard DFI LP UT SLI-DR Expert chipset nForce SLI almost new only LanParty - UT using BIOS DFI Del motherboard enter Cannot key Expert SLI-DR NF4 one SATA port is somewhat messed up missing those plastic parts from both sides bought this baby really cheap from well known Romanian e-bay like site okazii ro and I put it on my FX- dual core yeah THAT one and some KINGSTON value memory and tried to boot my rig Here is my problem now this board is Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard working those red diagnostic LEDS start next only one left so no quot LEDs of death quot syndrome for me and the onboard speaker beeps ONCE which I know is always a good thing but I cannot enter BIOS to setup as I need Del key on my PS keyboard is NOT working as it should I press the key and the result is nada nothing first I see the boot logo from Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard DFI after that Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard I see this error message quot CMOS checksum error - defaults loaded press F to continue or Del to enter setup quot and when I press Del I get nothig and when I press F key sometimes I see this message quot Verifying Pool Data and Backup CMOS OK quot and other times I see quot Sil SATA RAID Press Ctrl-S or F to enter RAID utility quot One more thing to add is that I can actually use boot menu selection using Esc key to selct HDD CD-ROM or some other option and this board actually can boot using CD DVD I already tried UBCD rescue CD and some Linux live distros to see if it s not a problem with my FX- processor and I m happy that it is working well is all good no problem here actually I ve seen it s name and working frequency Mhz at POST please help me to solve this problem with my mobo nbsp

http://www.techspot.com/community/topics/cannot-enter-bios-using-del-key-dfi-lanparty-ut-nf4-sli-dr-expert-motherboard.204105/
Relevancy 9.89%

Recently I noticed that my laptop speakers aren't working consistently at all. Sometimes I watch youtube, listen to pandora, and everything will work fine. Other times it won't work at all. I've been getting by like this for a week, but now it seems like now the only audio my speakers will play is a notification sound. I still have the computer under warranty, and I can take it into the store and get the speakers fixed. However, I was wondering if there was a way I could skip all the trouble/paperwork of taking it back in? maybe I just clicked something I shouldn't have?
Any tips are hugely appreciated!
 

http://www.techspot.com/community/topics/windows-8-laptop-speakers-are-inconsistent.204097/
Relevancy 21.93%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,

Steve
 

A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP Ū Support
 

http://www.techspot.com/community/topics/replaced-failed-motherboard-now-how-do-i-determine-model-number-and-which-bios-to-download.203956/
Relevancy 9.89%

I have a Windows 8.1 Laptop and yesterday it said I had no connections.
My computer is wireless but then it went to Ethernet it didn't let me connect to anything either.
I tried looking things up to see how to fix it but it just kept talking about buying cables.

Anyone know whats wrong?
 

A:How to fix Windows Laptop When it goes from wireless to ethernet

You may try to disable your Ethernet adapter (wired connection) while you're connected via a wireless connection through your wireless adapter.
 

http://www.techspot.com/community/topics/how-to-fix-windows-laptop-when-it-goes-from-wireless-to-ethernet.203484/
Relevancy 9.46%

Hi, not great with computers and had a look around at various forums and can't find a solution to my problem.

Essentially, whilst I can view the wireless network connections available, I cannot connect to the wireless connection I want to although all other computers at home can connect.

I think the issue is that I have no IP address on this computer (using Windows XP that has just been reinstalled). The result of ipconfig/release is:
No operation can be performed on Wireless Network Connection 2 while it has its media disconnected.

Sorry if further information is required, will provide whatever is needed. Thanks for any help!
 

A:Wireless Connection Media Disconnected (Windows XP)

First disconnect any wired connection and THEN attempt the wifi.
Something called DHCP is responsible to give the PC an IP address and also the DNS addresses (regardless of wired or wireless).
 

http://www.techspot.com/community/topics/wireless-connection-media-disconnected-windows-xp.203103/
Relevancy 23.22%

I was planning on using the lowest i5 processor but because of the refresh I lost the older ones.
The ones that are available are:
Intel Core i5 4460 (3.2GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4590 (3.3GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4570S (2.9GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4670 (3.4GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4690 (3.5GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4670K (3.4GHz HD4600 6MB Cache) Quad Core
 

A:What CPU's are compatible with the MSI B85-G43 Gaming Motherboard

http://www.msi.com/product/mb/B85G43.html#/?div=CPUSupport


Code:
Core i7 [ 4771,4770T,4770S,4770K,4770,4765T ]
Core i5 [ 4670T,4670S,4670K,4670,4570T,4570S,4570,4440S,4440,4430S,4430 ]
Core i3 [ 4340,4330T,4330,4130T,4130 ]
Pentium [ G3430,G3420T,G3420,G3220T,G3220 ]
Xeon [ E3-1240V3,E3-1230V3,E3-1220LV3 ]
 

http://www.techspot.com/community/topics/what-cpus-are-compatible-with-the-msi-b85-g43-gaming-motherboard.202560/
Relevancy 22.36%

This is the link of my motherboar....... http://vr-zone.com/articles/xfx-unveiled-intel-g31-based-xg31i-board/6218.html?doc=6218

I want to know whether I can use a DDR3 Graphics card on my DDR2 motherboard and if its certain to work. Please provide detail and whether it'll be compatible.
 

A:Can a DDR3 graphics card run in a DDR2 Motherboard?

The DDR2 slots on the motherboard refer to the desktop RAM sticks. GDDR3 on a graphics card doesn't make any difference, it's the connector (PCI Express 2.0 probably) that slots into the mobo.
 

http://www.techspot.com/community/topics/can-a-ddr3-graphics-card-run-in-a-ddr2-motherboard.202813/