Windows Support Forum

Mother board drivers

Q: Mother board drivers

I wanted to update my mother board drivers. There seems to be a few that need updating. My question is, that is it kinda tricky to do these updates? Can you mess things up if you don't do it correctly? My mother board is a Gigabyte GA-81945P-G. Is it REALLY necessary to update these drivers, even if my system is running good? Thanks for any ideas on this.

Relevancy 100%
Preferred Solution: Mother board drivers

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Mother board drivers

I would only use the CD that came with the motherboard to install the drivers. If everything is running ok I would not upgrade the drivers unnecessarily. This used to be a school of thought, but isn't the case anymore. If it works don't fix it. I never choose to randomly update my graphics or auto drivers any more. As long as they are working I leave them alone. Updating the drivers can sometimes result in negative results and cause you to roll back the driver to the previous one.
Relevancy 20.64%

Following yesterday's worldwide launch of Windows 10, all three major GPU vendors have released new graphics drivers that support Microsoft's new operating system. If you're upgrading to Windows 10, make sure you download and install these drivers soon after launch. ...

Read more

A:AMD, Nvidia and Intel release new GPU drivers for Windows 10

Is AMD planning to release Windows 10 drivers for RadeonHD234k cards too? Are those machines stuck with Windows 7?
Relevancy 21.07%

I have a Gateway NE56R34u Laptop, I tried to check the drivers in device manager and it seems that everything has been installed properly or no missing drivers found but when I tried to check some of my hardware in DXDIAG showing N/A for (operating system, processor video etc.) I also tried to update it or uninstall the driver but still the same help me out please thank you

A:Have drivers but showing in DXDIAG N/A

I also uploaded some information so atleast it will be easier for some to determine my issue thank you
Relevancy 21.07%

In dxdiag option and in Display option all 3 acceleration options are not available in my pc. But I had installed the drivers and hardware for graphics then too it showing not available. Can anybody tell me how can I enable all those 3 options. I have Standard VGA Graphics Adaper.
Here is screenshot for reference -


A:Display Drivers Not Available

And Only Because Of That I am not able to open any game or sofware which requires display graphics. Any suggestions are most welcomed.
Relevancy 30.53%

Hi techspotters it has come time to modify my old rig I m planning to upgrade the cpu without changing my motherboard but there is a slight risk involved that the purchase I am going to make is with CPU board AM3+ AM3 faul So back to basics My current MB M A TD PRO AM3 board with AM3+ CPU USB - link Current CPU Phenom t oc running ghz Current RAM EVOleggera x running underclocked mhz the one to upgrade to AMD FX -- So this is a basic operation a cpu swap but few questions popped up on the research phase M A TD is a AM board which apparently after some searching supports some of the FX series cpus that are AM I have also found the corresponding BIOS that I need to flash myself to to make it work properly and be recognized by the MB link Q amp A FX is known to support mhz RAM speeds my existing RAM runs max at without overclock and is placed x which occupies all slots and might confuse the FX which supports dualchannel as usual Meaning I will need to leave my RAM running at mhz how big will the reduce be in the performance of the CPU- mhz vs When setting up the proceccor I will need to disable the Turbocore to make it stable on the older AM board which only supports cpu speeds up to ghz and the fx on turbo bumps to ghz After disabling turbo all cores are set to run at which by research is the most stable option on my existing MB Will FX bottleneck gtx or gtx and how bad it is going to be Upgrading hardware is always nice but am I making bold move by upgrading a year old cpu to almost as old one And if someone with more knowledge can state me that there is no performance gain to be maid I just might stick with my old as long as its still breathing and calculating Thanks in advance for replys And no changing an motherboard is not an option So fond of my old rig best regards m nbsp
Relevancy 29.24%

Evening, all

I bought an interesting little Single Board Computer as an mITX motherboard (a WADE-8020, more info at the link below):

I have another similar board in an old Hoojum Cubit 3 case, and was wondering if anyone might have any other suggestions for a similarly eye-catching case, probably ready-made, though I'm not averse to either buying a DIYed case, or maybe trying to make one myself (I have a Dremel but not much else, and that includes skill )

Cheers, Jon.
Relevancy 20.21%

AMD has finally released a new set of Catalyst beta drivers for Radeon graphics cards, promising performance improvements in two recently-released PC titles: The Witcher 3: Wild Hunt, and Project Cars.

Read more

A:AMD releases Catalyst 15.5 beta drivers for The Witcher 3, Project Cars

I dont know why but after 14.4, every driver is causing BSOD and restarts randomly on my R9 290
Relevancy 19.78%

AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware. There's a ton of controversy surrounding what did...

Read more

A:AMD is working on Catalyst beta drivers for 'The Witcher 3: Wild Hunt' and 'Project Cars'

"AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware."

At the risk of pointing out the obvious, "runs like crap" doesn't strike me as professional an expression as "runs terribly" or "are both exceptionally poor performers on..." It may convey the sentiments of the accompanying article comments, but those are supposed to be crude.
Relevancy 20.21%

Ahead of tomorrow's launch of The Witcher 3: Wild Hunt, Nvidia has released a new GeForce graphics card driver that's Game Ready for the open-world action RPG. The GeForce 352.86 drivers are also WHQL certified, meaning they are stable enough for everyday...

Read more

A:Nvidia releases new GeForce WHQL drivers for The Witcher 3, Windows 10

Mine were updated hours ago, you just can't beat GFE for this sort of thing (or for game display settings optimisation as far as I'm concerned, it works for me).
Relevancy 29.67%

Hey all,

On my studio pc, I've installed a new rack mounted firewire audio interface in the studio. On the other drives (windows 8.1) the interface has installed perfectly but on the xp drive, although the drivers etc have been installed, once set, it works perfectly with the new outboard soundcard.

However, whenever I reboot to the xp drive, xp always reverts back to the on-board realtek sound card. I set the default to the new interface (a Presonus Firestudio Project) but every reboot it defaults to the realtek.

The motherboard is a P5N-E SLI if that helps.

How can I stop this happening so the new interface is the default?

Thanks in advance,

Relevancy 28.38%

So heres the story The computer has been working fine for several years Last night I decide to D850MV/D850EMV2 long Three desktop board beeps on Intel plug in my tv to the desktop via dvi It Three long beeps on Intel desktop board D850MV/D850EMV2 works fine and I dont have any problems I get home today and try and turn the computer Three long beeps on Intel desktop board D850MV/D850EMV2 on and I dont get any video signal to either the tv or the normal monitor Also long beeps accompany start up it sounds as though things boot but I dont get video or sound but it sounds like the hard drives click now and then like normal and the fans all run fine Ive swapped the first ram stick with one other and havent tried the rest yet and I have not changed the video card yet but plan to in the next minutes as of writing this Nothing looks physically damaged and I dont have any extra ram for this computer laying about since its a rambus so all I can do is swap the ram thats in it around and because I cant get video I cant run a test on the ram Suggestions or help would be appreciated Specifically what the long beep codes mean ive Three long beeps on Intel desktop board D850MV/D850EMV2 found a couple different versions of the code online and not sure which is correct Also what might have caused the problem plugging the tv in thats the only thing I did different unless someone was messing around with it without my knowledge or could it just be from years of wear or what nbsp

A:Three long beeps on Intel desktop board D850MV/D850EMV2

I think three beeps on Intel is a memory issue. At least that what it was when I had a stick of cheap RAM crap out on me.

I'd run Memtest and go from there

RAM can fail from a number of causes. Heat exposure, flaky transistor junctions, who knows. I seriously doubt plugging the TV in had anything to do with it.
You could go into BIOS to ascertain if the RAM voltage is set correctly. Over-volting is a DIMM killer.

You should be able to get documentation for that board directly off Intel's web site. Intel used to give BIOS beep codes ion the board/chipset manuals.

They also have hardware monitor software as a free download. Look up "Intel Desktop Utilities Lite".
Relevancy 63.64%

This is my Entire system spec Im looking to upgrade my processor but I need help Operating System System Model Windows Home Premium x Service Pack build Install Language English United States System Locale English United States Installed AM Boot Mode BIOS Secure Boot not supported eMachines ET G System Serial Number PTNBA Enclosure Type Desktop Processor a Main Circuit Board b gigahertz AMD Athlon II X u kilobyte primary memory cache kilobyte secondary memory cache -bit ready Multi-core total Not hyper-threaded Board eMachines MCP PM-GM Bus Clock megahertz BIOS AMI P -A Drives Memory Modules c d Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space HL-DT-ST DVDRAM GH N SCSI im with AMD is board? to my What Processor mother compatible this And new CdRom Device Optical drive WD Virtual CD USB Device Optical drive Generic- Compact Flash USB Device Hard drive -- drive Generic- MS MS-Pro HG USB Device Hard drive -- drive What AMD Processor is compatible with my mother board? And im new to this Generic- SD MMC USB Device Hard drive -- drive Generic- SD MMC MS What AMD Processor is compatible with my mother board? And im new to this MSPRO USB Device Hard drive -- drive Generic- SM xD-Picture USB Device Hard drive -- drive WD My Book USB Device Hard drive GB -- drive s n WMAVY WDC WD AAKX- CA SCSI Disk Device GB -- drive s n WD-WMAYUL SMART Status Healthy Megabytes Usable Installed Memory Slot DIMM has MB serial number DE B Slot DIMM has MB serial number D B Slot DIMM is Empty Slot DIMM is Empty Local Drive Volumes c NTFS on drive GB GB free k FAT on drive GB GB free Operating System is installed on c Network Drives None discovered Users mouse over user name for details Printers local user accountslast logon Quentin PM admin UpdatusUser AM local system accounts Administrator AM admin Guest PM HomeGroupUser never Marks a disabled account Marks a locked account HP LaserJet Professional P w on IP Microsoft Shared Fax Driver on SHRFAX Microsoft XPS Document Writer on XPSPort Controllers Display ATA Channel Controller ATA Channel Controller NVIDIA nForce Serial ATA Controller x Standard Dual Channel PCI IDE Controller What AMD Processor is compatible with my mother board? And im new to this NVIDIA GeForce GTS Display adapter DELL WFP Monitor quot vis s n XX- JU -XXXXX- - S June Bus Adapters Multimedia Standard Enhanced PCI to USB Host Controller Standard OpenHCD USB Host Controller HP Webcam HD- Mobiola Wave Audio Device WDM Mobiola Web Camera Video Source NVIDIA Virtual Audio Device Wave Extensible WDM Realtek High Definition Audio Senstic PocketAudio Senstic PocketCam USB Audio Device Virus Protection Back to Top Group Policies No details available None discovered Communications Other Devices Hamachi Network Interface primary Auto IP Address Gateway Dhcp Server Physical Address A D Connection Speed Mbps Microsoft to Adapter Microsoft ISATAP Adapter NVIDIA nForce Mbps Ethernet Auto IP Address Gateway Dhcp Server Physical Address FC C AA Connection Speed Mbps Teredo Tunneling Pseudo-Interface Networking Dns Servers HID-compliant consumer control device x HID-compliant device x USB Input Device x HP Webcam HD- HID Keyboard Device x HID-compliant mouse Microsoft PS Mouse USB Composite Device x USB Mass Storage Device x USB Root Hub x Generic volume shadow copy WD SES Device E F G H I nbsp

A:What AMD Processor is compatible with my mother board? And im new to this

That is an AM3 socket CPU which means it should be compatible with the Phenom II series CPU's. I looked up the board and it should still support up to a 95 watt CPU so any Phenom II X4 CPU with a 95 watt TDP would work on it.

Like This
Relevancy 29.67%

As the topic says, my computer doesn't detect my on-board sound card. It all started when I tried to install new audio drivers from manufacturers page, but the next day when I booted PC up there were no sound. In Device Manager, under Sounds, game,.. controllers tab sit 4-5 High Definition Audio Devices. Here's pic:

Then tried re-installing original audio drivers from motherboard CD, enabling/disabling On-Board HD Audio in BIOS but still no luck.

My Audio Device is VIA VT1705.
DxDiag shows that no sound card was found.

This is what is shown in Playback Devices tab:

But I have no HDMI kind audio devices..

How to make my system recognize my sound card?
Relevancy 20.64%

I am having Nvidia Geforce 740M 2 GB graphic card .My Graphic card drivers are malfunctionig.The screen starts to flicker when I play games like dishonored ,arkham city etc .I have tried reinstalling the games as well as I have Uninstalled and then again installed my graphic card drivers again. I have even tried the newer versions of my graphic card drivers. But its not helping.

A:Graphic card drivers malfunctioning

Spybat said:

I am having Nvidia Geforce 740M 2 GB graphic card .My Graphic card drivers are malfunctionig.The screen starts to flicker when I play games like dishonored ,arkham city etc .I have tried reinstalling the games as well as I have Uninstalled and then again installed my graphic card drivers again. I have even tried the newer versions of my graphic card drivers. But its not helping.Click to expand...

Your GPU maybe going bad, it happens from time to time and this is based on the fact you have uninstalled everything and tried again. Have you also tried lowering the graphics settings in both games lower to see if that helps? Also try making sure Physx is off because thats very demanding for a 740m since Batman has Physx.

My advice is to seek your notebook manufacturer if nothing I said helps and see if they can replace the card in it. I don't know what else off the top of my head you could try since you have done by the sound of things everything correct.
Relevancy 20.64%

Just got the new mouse home, but to enable aim precision and other programmable buttons and need to get the drivers. When I try to download them it says plug in the device, which is already plugged in and I have also tried in different usb ports and safe mode. Anyone with this mouse got it to work?
Relevancy 29.67%

After my brother sprayed it with glass laptop key board types wrong letters.lets say I want to write "my laptop key board is messed up" this is what it types: my lap0to9p0 ke3ybo9ar4d i8s me3sse3d u7p0. all the letters in the upper row type the letter and the number above it and vise verse(exept t,y,5,6)
I tried the num lock and sticky keys,checked my language tap still nothing
(I use dell inspirion , windows 7)
Plz help.

A:My laptop key board is messed up

Have you tried a USB keyboard? If not, try it. You might also try the on screen keyboard.
Relevancy 20.64%


I remember when I first lost my Motorolas original CD, I couldn't find the software anywhere to be downloaded and no one that i knew had a motorola rzr mobile phone...

I found my old cd here a few days ago so I made an .iso file of it and uploaded it (as 13 .rar files, the file max size is 50Mb).

Here it is

Tel me if the link doesn't work or something. Razr?permissionsChanged=1&1

A:Motorola Razr v3 drivers and software

Yep that works for me.
Relevancy 20.64%

Hey Everyone,

I'm not sure whether this is the correct place to post this (I'm new here). Sorry if it's the wrong place!

So my problem is I am running a laptop on windows XP. Every time I start up the computer, it prompts me to install device drivers (HID-compliant devices and stuff). The weird part is, I've already installed those drivers when I first got the computer. I've learned to just press cancel every time those prompts pop up, but I'm wondering if I'm able to stop them from popping up every single time I start the computer. I'm also curious as to why it's doing this. Any help would be greatly appreciated!

Operating System: Windows XP Service Pack 3
Processor: Intel core 2 duo
Brand: Lenovo R500
Graphics: Intel R 4 series express chipset family (on-board)

A:Drivers always prompting to re-install (windows XP)

I'm far from an expert, but why not let them install to see if it quits prompting you? If all else fails, you can roll them back. After all, they could be "updated drivers". Just my thoughts.
Relevancy 29.67%

I just came from a retail store to check on prices but most of their parts weren't available anymore. Instead of a G. Skill Ripjaws 2x4 8gb DDR-3 1600, the clerk offered me a Crucial Ballistix 2x4 8gb DDR-3 1866 memory. The board I'm gonna buy is an Asrock H77 Pro4/Mvp but looking at their memory support list Pro4/MVP, it doesn't seem compatible.

The clerk had told me it was compatible and that he had tried it before but I'm not sure if it'd have unwanted effects over some period of time. (I got drawn in by how the memory looks and its LED so I'm including it as a choice). Thanks.

A:Is a 1866 memory compatible with an H77 board?

It will be compatible, worst case scenario is just setting your 1866Mhz RAM to run at 1600Mhz. You're getting quicker RAM for free.
Relevancy 21.07%

Guys,after having research in net I have come to know that Nvidia r more supportive about there drivers then ATI.I have found that Nvidia are still taking good care about there 4XX gpu on the other hand ATI get forgot their past cards when new series gpu released(said it on basis of driver).ATI just take care well their latest models but Nvidia also takes care of past models
.I want best bang for my bucks which also mean long run in my gaming experience.So which brand should my choice.MY configRO core i5 3470
Ram 8GB
PSU 550watt
Monitor 18.5inch led
GIGABYTE - Graphics Card - NVIDIA - PCI Express Solution - GeForce 600 Series - GV-N660OC-2GD
MSI Global ? Graphics Card - R7850 Twin Frozr 2GD5/OC
Correct me if I m worng.
SOrry 4 BAD english

A:Nvidia vs AMD when it comes to drivers (who is best for long run)?

Bang for buck at time of purchase is usually AMD. Yeah, NVIDIA has better driver support.. but with a mid-range card I'd just go with AMD.

If you aren't spending money to keep up with the times, don't expect the latest releases to run like butter. That's pretty much it.
Relevancy 21.07%

Hello, I have a Dell desktop PC purchased in 2009 that works great except it will not connect to the internet anymore. I run Windows 7 and have tried enabling DHCP under adapter properties but to no avail. Also installed latest driver (Realtek PCIe GBE Family Controller) and still won't work. When I try ipconfig/remove and renew, it returns "the operation failed as no adapter is in the state permissible for this operation." Below is ipconfig/all:

Windows IP Configuration
Host Name . . . . . . . . . . . . : StudioXPS9000
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Any help would be greatly appreciated!

A:Can't connect to Internet even with new drivers

I think a first step here is to go to Device Manager and remove any/all network adapters you see there, and then reboot.

Second step would be to get the network adapter driver from Dell's site for your dell desktop and Windows 7.

If step 2 is able to be done (like they don't have a win 7 driver for it) you should still see something in Device Manager even if you don't have a proper driver for it. Windows should be able to give you a hardware ID for it, google that and get the Win 7 driver from the chipset provider/manufacturer.
Relevancy 29.67%

Hi all, I have monitor gericom 2030 and it has some power board model that I cant find on sell, so I have buy one that is almost same with it. 4 plugs for invetors are same but one connection for t-con board is diffrent and on oroginal board I have pins (5V, 5v, GND, GND, 12v, BL, N/F) and on board that I have buy has ( 12v, 12v, GND, GND, 5v, 5v, GND, N.C, ON, DIM, MS ) So any suggests wich on wich one I should connect?
Relevancy 29.24%

I got a M5A99x Evo Re2.0, brand new board and the audio from the rear doesnt work at all when I plug the pink and green plugs. I have an HDMI connecting from my TV to my Gcard, I get audio through the TV but cant seem to get those jacks working. Ive used two different headsets to see if it might have been the headset itself. im really stumped.

A:New board, no sound from front or rear jacks

Have you gone into the sound menu in your control panel and set your default audio device to your headset?

If, under the "playback" tab, the HDMI output is ticked, then this is the problem.

Just click on the correct device(It should either list your headphones or say "high definition audio", or something similar) and then click "set default".

This should solve the problem.
Relevancy 20.64%

Hi. I have got this laptop with these specs

320gb hard drive
2gb DDR3 memory

I have got a CD with it which contains many drivers. for example only for bluetooth there r 3-4 drivers with different vendors. what should I do? install all of them?

* currently I hv installed all of them. Laptop now got a slow startup and hangs some times but dats very rare and recovers most of the times
I dont play heavy games etc on it too

waiting for replies

A:Acer Aspire 5749 drivers

So game lags when u playing heavy games if so then its probaly just about managing to play the games with the specs
Relevancy 20.64%

I have updated all the sound drivers in my device manager, still my pc is not giving out sound. pls help Dell latitude 120L

A:Sound problem, updated drivers

might sound silly but have u checked in your volume control as last week I had same problem then when I clicked on volume icon in task bar volume was down and on mute for some reason
Relevancy 21.07%

Soooooo, my hard disk crashed before I did a backup, I have no recovery disks, toshiba doesnt ship to afghanistan, I bought a SSD drive, I bought Win 7 64 bit. Before this I tried to recover files by any means necessary, to no avail it dleted all my files and drivers. I installed win 7 and realized I had no drivers. From the Toshiba website I installed all drivers for my model L655D-5066. Everything works except the sound. I click on the speakers fron the device manager and win tells me all the drivers are up to date. The driver installed for sound is conexant smart audio hd 4.119 something. The driver for the speakers is windows 6.1. something; it will not let me use the conexant or anything else. What do I have to or need to do?

This is what I see...


A:Installed drivers but no sound

Not sure if I can help, but will take a look...

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Attach it to your next post by clicking the Upload a File button
Relevancy 20.64%

Hi all! Please help! My wife's notebook, (ASUS G71GX, Win 7, wireless card Atheros AR928X), wireless connection to our home LAN (D-Link DIR-655) suddenly stopped. It shows the available networks, but cannot connect to it. The hardware manager shows no problem with the wireless card.

I'm not sure what the problem is, but could it be the drivers, not the hardware? So far, I uninstalled and re-installed the driver for the AR928X. No changes, but maybe I didn't do it right.

Could someone help out, please?

A:Wireless reads but cannot connect to network... is it drivers?

Never mind. Thanks. I ended up deleting my home network, and then re-creating it. That solved the problem, even though I still do not understand how that worked
Relevancy 21.07%

I currently have a gtx 560 ti and I'm acquiring a gtx 670. So, in the end, both cards will be under the hood.The 670 will go into the currently 560 ti slot and the 560 ti will go into the currently empty slot. Both use the same driver, do I have to reinstall it, or just stick the new gpu to the mobo and be happy ever after?

A:Do I have to reinstall the drivers when adding a new GPU?

Generally, I say you should always re-install graphics drivers when adding a new card.

What is the reason for running both cards at the same time?
Relevancy 20.64%

I recently bought a 1TB external drive in the first month was the paradise of about three months here been hell ...

The problem is that the windows when i connect the disk, sometimes it correctly detects and installs the correct drivers, other times it detects wrong and installs other wrong drivers.
When you install the wrong windows drivers in Disk Manager says that is not present or does not detect the capacity, despite the indication that I have the the connected USB device. Another indicator light is always on the disc, rather than intermittently (indicating that it is accessing data) ...

To be even more difficult the drivers are registry keys ...

Have tested it on several PC with W7 and XP sp3 and the problem still occurs ...

Have I contacted the support of the disc but the impression I got is that understand of hardware even less than me ...

Can you help me please!!

A:Wrong plug-and-play drivers

OMG! what is the brand/make/model of the external drive in question?!? I have never heard of a known brand to do something like that unless the enclosure itself is hosed and/or beginning to fail. Post back & let me know, take care!
Relevancy 35.26%

My father wants me to find my mother a laptop, he gave me a budget of around $700. In all likelihood she will mostly use it for facebook, facebook games and movies. She will mostly be using the laptop while working in a coffee stand so she can probably plug it in whenever she needs to. She probably wont replace it for some time so something that will hold up well over the years would be nice. She hates change and is used to using windows systems so I'm not sure if she would go for a mac. I really don't know a damn thing about laptops and I have no idea what to look for or where to start so any help would be appreciated.
Relevancy 29.24%

Hello Everyone,

Been a long time browser of TS and am glad to finally join. I am looking to utilize a Q6600 processor and the following system board and RAM:

Corsair XMS3 1333MHz PC3-10666

The goal is to moderately overclock the Q6600 to 3.2 GHz. In my research, I have read many positive reviews about the stability of ASUS boards, and the DDR3 capability is significant to me. However, from what I have gathered, this board can be fussy when overclocking the CPU. Has anyone had any experience with a similar setup?

I would appreciate any thoughts/comments/suggestions.

Thank you!

A:New project: LGA 775 board w/ DDR3 needed -- thoughts please?

Firstly, why do you need to overclock it? I'm guessing its more because you want to, than necessity, but my thoughts are below.

I run the exact same CPU in my system 24/7 and while it might be long in the tooth compared with most systems on here, it's certainly not lacking at stock speeds as it is.

Not sure if system specs is easily read right now, but for the sake of doubt, mine are: Intel Core2Quad Q6600 G0 stepping (at stock OC with Corsair H50 (push/pull) providing cooling), Abit AW9D-MAX, 8GB OCZ Gold series DDR2-1066, HD6870, Antec HCG-620 PSU, a SSD and six mechanical disks.

I wouldn't call 3.2GHz a moderate OC on the Q6600, that's more like 2.8-3.0GHz. I used to have mine overclocked but the difference was so minimal (in real terms) that the additional heat it gave off and power it consumed made it pointless. I was never able to achieve 3.05GHz or above either, but I've no doubt that more experienced hands would have managed it. Overclocking is my weaker subject in the field of IT generally speaking, and I can't say I've ever really pushed the envelope very far in that regard.

Though that said, I've always found Gigabyte boards to be much more forgiving when it comes to RAM settings. Asus in my experience can be a real nightmare with recognising the default timings and voltages for RAM, and in "my experience" need much more work to achieve the same result.

Another point that needs to be considered is LGA-775 is legacy hardware now, so you'd be spending money on defunct hardware. If you have the CPU it might be better to grab a second-hand board off of eBay or something, or maybe look to something newer and more current.
Relevancy 29.24%

Bought me recently a new MoBo: P8H67, installed it, killed Realtek onboard in the BIOS, all thus far goes splendid.
Put in SoundMax (from my P5E Lifestyle), hardware checks ok.
Install driver... and here things go awkward: no matter what I try: SoundMax Hi Def is not found/recognized.
Tried both the DVD-soft that came with me P5E, as well as online new drivers, to no use...

Reason for SoundMax: I was slightly baffled by the power behind the tiny card, it was literally mindblowing (over my JBL's).
This power is not found on Realtek hardware, hence.

Prob: I want to keep using the tiny SoundMax, but I desperately need a driver.

Win 7 Ultimate X64 (registered)


Thank you all:

A:P5E Lifestyle Board SoundMax to Asus P8H67

List any Problem Devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save to your Desktop
In TechSpot window, use the paper clip icon to attach the report. (If you don't see icon you may need to first click Go Advanced)
Relevancy 29.67%

i was wondering if HIS H675FS1G Radeon HD 6750 1GB 128-bit DDR3 PCI Express 2.1 x16 HDCP Ready Video Card would work on a MSI G31TM-P21 LGA 775 Intel G31 Micro ATX Intel Motherboard.

Card # at Newegg=N82E16814161395"]

Board#at Newegg= N82E16813130234

o wait the card is ddr3 , does that mean it won't work?

A:Graphics card compatible with this board?

Sure, the card will work fine. The graphics card memory is independent from the memory type of the motherboard.
Relevancy 20.64%

Hi guys, bought a new PC recently and got everything set up fine, except the GPU.

Its all installed correctly but when I go to install the drivers from either Windows Update or the given CD and restart to save changes, I lose video signal.

I see the boot screen and Windows 7 loading bar, afterwards my screen says "Mode not supported".

I'm using the Nvidia 560 Ti and my screen is a Samsung LE19R86BD.

Is the installation possibly switching to 1080 while my monitor isn't supporting it?

A:No video signal after installing GPU software/drivers

I've read that there are times when the driver can't properly read the EDID data from the TV, and causes display problem. Can you boot into safe mode, change the display setting to 1440x900, then reboot into normal mode? Looks like your nVidia card has both HDMI & DVI connection, maybe try changing connection from one type to the other?

The driver I found on nVidia's site is version 285.62. Is that what you have?
Relevancy 21.07%

Hello, First of all thanks to anyone who can help.

Here is my problem: I just built my brother his computer for Xmas and everything is brand new and the computer is "working". Yet every time I start a game or try to get the system rating the comp either freezes, restarts, or blue screens. I've updated the video card half a dozen times and It says that it is updated yet problems still occur.

Here are the specs

OS- Windows 7 64bit
Video card- AMD Radeon HD 6900
Processor- AMD 6 core 6100
Motherboard- 990FX Sabertooth
Ram- 8gs
Power- antec 900w
HD- 2 terabyte

A:Drivers are updated, but PC keeps freezing

Although that processor is supported by the motherboard, it's possible that the BIOS is an older version, pre-FX.
Relevancy 29.67%

I have been going through the process of building a computer for the first time and the motherboard is the final piece of the puzzle I am seriously considering the Asus Maximus Gene-Z as the motherboard to go along with GB Hawks OC in SLI on mATX a Is SLI usually on board avoided? air to go along with an OC i - k but I have been seeing some concerns about temperatures in general As far Is SLI on a mATX board on air usually avoided? as cooling the board would be in a mid-tower that has the dimensions of the full tower Storm Sniper with its default fans and the CPU would be cooled by a Corsair A I do have a few ATX motherboard in mind if the mATX option isn t ideal for SLI including the MSI Z A-GD ASUS P Z -V PRO or ASRock Z EXTREME GEN i - K Corsair A GB GTX Hawk in SLI x GB G Skill Sniper DDR Samsung Spinpoint TB Asus x DVD-Drive Cooler Master Storm Sniper Seasonic X- nbsp

A:Is SLI on a mATX board on air usually avoided?

Personally if I was building a computer without having any hardware to start with I would probably aim for a higher end single card rather than 2 older and now mid range 460 GTX cards. That way in the future you can pickup another higher performance card and then use SLI.

As for mATX and SLI, as long as the board supports it then there is no problem. You have stated its in a full tower so airflow won't be a problem. You might find some problems such as PCI 1x slot blocked/unusable when you have two double slot (two expansion slot height) PCI-E graphics cards in the motherboard.
Relevancy 30.1%

Hi all I have an asus x s laptop and a while ago the power jack inside broke off and went further into the unit I managed to take the laptop apart and retrieve the jack I then rather stupidly attempted to desolder board PCB Splintered the remainder of the unit from the board and found that apparently ASUS use diamond as solder that or I wasn t doing something right Anyway point is that the contacts stayed in the board no matter what and only with force Splintered PCB board and heat did they come out unfortunately however there are still two contacts firmly in the board Anyway as you can all imagine the inevitable happened The board warped slightly and on one of the corner points the iron went through and splintered the side picture attached A couple of questions Number And I think I already know the answer to this As this has happened will this be detrimental to the running of the laptop I m going to guess that the second I turn it on should I be successful in replacing that the power will short and the world will end or something Number Since last using the laptop I can only assume that the rest of the components processor RAM Drive etc are still in good working order and I m wondering just how successful anyone may think it would be to sell the laptop as spare parts or would I be better off taking into the yard with a shotgun Sorry about the cynical nature of this post that s just how I am that and I m incredibly annoyed at myself for thinking that me soldering iron delicate electronics was ever going to have any other outcome than this nbsp
Relevancy 29.67%

Need info old board P4SD-VL


<I'm trying to fix a very old pc; it's almost ready but I can't set front USB ports.>

Thatīs what I said. But more than a simple thing I need; USB frontal ports are working now. The matter is I canīt find drivers to set Sound, LAN, Modem... The pc is working fine, I've installed operating system, office programs and some other software without trouble.

Thanks in advance for your help.


A:Need old board P4SD-VL front USB pin description

Who made the motherboards chipset? VIA?
Relevancy 28.81%

hello, ive had this desktop computer for years now and the processor is extremely outdated. I have been looking around trying to figure out how i can upgrade the processor speed but it seems the more i look up the less i know about computers...

anyways i have: Board: MICRO-STAR MS-7184
Serial Number: 5922655884

current proccessor: 2.00 gigahertz AMD Athlon 64
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Not hyper-threaded

I believe the socket is a 939? when i looked up these specs i found that the highest processor i can place is " AMD Athlon 64 X2 (up to 4800+) and Sempron (up to 3200+) processors".

Can anyone verify this?Or is it not worth investing in a new processor? i am looking to find the best upgrade rather then spending cash to buy a new computer. Any advice would be extremely appreciated.

A:Looking to upgrade processor, board Micro-Star MS-7184

Hey Noctis,

Truth be told you are better off upgrading your Motherboard, RAM, and Processor if you want to see any substantial difference. A socket 939 is quite a bit old and since then they have move onto the AM2, AM2+, AM3, AM3+, etc sockets for AMD Mobos and Processors.

Socket 939 processors are to the point where they are no longer just old enough to be cheap. Since they are no longer made they are old enough to be more expensive than modern counterparts in many cases.

When upgrading the MOBO and CPU you want to look into more than just the processor speed. Important factors are also the types and amount of cache for a processor, number of cores, and RAM that can be used with that CPU.

The newer Athlon II X2s as an example are a significant leap from the original Athlon 64s and a discerning buyer online can find them significantly cheap. AM2+ boards are currently somewhat inexpensive and so is DDR2 RAM. They are currently at the stage where they are old enough to be somewhat cheap but with the newest socket and processors being sold by AMD now it may change iwthin the next few years to start getting expensive again from being old enough.

You also have the route of a AM3 with DDR2 or DDR3 Ram option available which are also moderately priced.

If you check out the website you can look at pricing for several different mobos, cpus, etc from various websites easily. I just completed a full build including case, HDD, Mobo, CPU, DVD-RW, RAM, Graphics card, etc for just over $350.00
Relevancy 20.64%

Hi all i have what porbably are dumb questions but i need clarification all the same please i just bought a XFX HD GPU upon your recomendation and was wondering if i should uninstall all the nVidia stuff in add and remove except the driver before i remove the card or just remove the card install my new one then uninstall the nvidia stuff I have a spare gigabyte GT GPU which i would like to give to my dad as he has an old Pack-Bell iMedia which he uses in the lounge to watch Uninstall for installation? drivers fresh GPU films on and browse the net Uninstall drivers for fresh GPU installation? The PSU in this old machine is only a watt and the GT reqiures a w minimum but as he wont be playing games or doing any photo editing etc only watching mp films would the PSU still power it reason i ask is it has a HDMI connection and his stock card is the old blue pin plug so i thought is would get a better pic using my new card also the GT is mb and the stock one is only mb Your thoughts please Thanks Lee nbsp

A:Uninstall drivers for fresh GPU installation?

1. Yes, you can remove all the Nvidia components through Add/Remove, although it's probably easier to download a utility such as Driver Sweeper which will remove the driver, PhysX, HD audio, Update etc in one move... Just remember that the system will likely revert to a lower VGA (640 x 480) screen resolution.
You can then power down, replace the card and install the driver/catalyst control centre etc.
Once you're up and running it would pay to bring up the Device Manager, click the "View" tab and check "Show hidden devices", then expand the "Display adapters" heading. If your previous card shows up -right click and select uninstall.

2. You say that your dad's computer is an "old Pack-Bell..". Power supplies gradually lose their effective output over time as components in the power supply wear, so his 250w PSU is likely much less. The GT210 isn't a power hog by any means (30.5w max) but picking up a suitable (and relatively cheap) PSU might be a good investment in any case, especially if the computer/PSU are 5+ years old.
Relevancy 20.21%

The audio on my Asus P E DELUXE WiFi-AP motherboard does not appear to work Windows says that there is no audio output device installed As on from Asus Win7, install device audio won't No drivers such when I plug my speakers in I get No audio device on Win7, drivers from Asus won't install no sound and the sound icon in the notification area continues to display a red circle with an quot x quot The High Definition Audio Controller is installed under Device Manager and appears to be normal However it is listed under System Devices There is no listing for Sound Video amp Game Controllers I am not sure if this is applicable to Win I have disabled and re-enabled the audio controller I have uninstalled it and let Windows reinstall it All to no avail For what it s worth the controller appears to be using a standard No audio device on Win7, drivers from Asus won't install Microsoft driver System info says that no sound devices are installed I have verified multiple times that onboard audio is enabled in the BIOS I have tried disabling the audio in the BIOS booting into Windows shutting down and then re-enabling the onboard audio No go I have attempted to reinstall the Soundmax drivers from ASUS They don t install I receive an error message saying that the audio driver files do not support my hardware I am sure that I am trying to install the correct drivers There is no software installed that would be interfering with the audio and all services look normal Any ideas nbsp

A:No audio device on Win7, drivers from Asus won't install


which speakers are you using and which driver?
because most of the speakers are plug n play...
Relevancy 18.06%

Hi, sorry, not very good at this sort of thing, but any help would be greatly appreciated.

1) Thursday night - mouse was working. Sunday evening, mouse is not working.
2) In the device manager it tells me I have two HID-compliant mouse drivers, location: "On USB Input Device" - I only have one USB input for my mouse. I tried disabling one of the drivers to see if it was a conflict problem. No luck.

Any ideas? The mouse is a "Wireless Optical Mouse M/N:SM-502C"

Thanks for reading

A:Mouse stopped working after weekend away/appear to have two mouse drivers?

If you Goggle / bing / yahoo this info you you get ??

ciderlout said:

The mouse is a "Wireless Optical Mouse M/N:SM-502C"Click to expand...

I got this

The connection has timed out

The server at is taking too long to respond.

The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Click to expand...
Relevancy 19.78%

I have an ASRock gx AM MB I recently purchased a Visiontek Radeon HD video card I popped the card in and hooked up my vga cable I booted up to my OS win x and installed the drivers for my card This Was all after I had previously uninstalled on board graphics and changed settings in bios to use PCI express as my video output Okay so after a reboot things are going smooth So I unplug my vga cable and plug in my DVI cable and get no video So I unplug the DVI and plug back in the VGA cable and I then have NO video So I reboot my computer with no luck Then I plug my vga back into my on board slot and take a look in my device manager and it isn t showing my video card only MB no longer ASRock install drivers card or recognize video correct will on board graphics and on top of that every time I run the ATI software to install drivers for my card it will only install drivers for my on board graphics and doesn t install them for my PCI Express card I m sure the card and slot are fine as I have run them successfully once before I ASRock MB will no longer recognize video card or install correct drivers don t know what to do but I really don t want to have to go through the hassle of sending my card back Any help would be greatly appreciated thanks nbsp

A:ASRock MB will no longer recognize video card or install correct drivers

Could the fact that it isn't recognized by my PC be do to a lack of power from my psu? I have a raidmax 530w psu and min for the card is 400 so I figured I was okay... There is no place on the card to hook a cable from the psu to. It gets all its power straight from the MB... I dunno if that info will help any
Relevancy 28.81%

Hi y'all

I got a Intel Server Board L440GX with the dual Pentium III processors and i cant get it to recognize the Mylex eXtreme RAID 2000 FW 7.01-00. I have never configured a raid before but i think i got it right(not sure) anyway the bios says that no h.d. or likewise is installed. I ain't got any ideas on what to do please help

A:Intel server board L440GX RAID issues

bwta, sound like you better take a look at:
Relevancy 20.64%

Im doing a standard XP install on a Sony Vaio PCG-8112m, but i can't seem to find any drivers, the computer came with Vista.

Is there anywhere you can download XP drivers for this? Or any laptop drivers that would be compatable for the network driver ECT?

Thanks for help

A:XP drivers for Sony Vaio PCG-8112m?

Can you install Windows 7? If there are no XP drivers listed on the Sony Support site for this laptop, you're out of luck
Relevancy 29.67%

Hi, (First Post)

While it is often true that when you get no post after startup, that it is often the powersupply - it would be nice to know if the motherboard is functioning properly.
I use power supply testers, a great time saver, but does anyone know of a reasonalby inexpensive motherboard tester on the market?

A:Board test equipment

Well, I have seen a few mobo/ram testers on Ebay but have no idea how good they are. Just do a search on there for motherboard tester and several will come up, they are about Ģ20.
Relevancy 20.64%

Forgive any typos as I'm post this via iPod. So after a weekend of horse crap Internet speed on the laptop (and not a hiccup in speed on the PS3). I figured I'd try updating my wireless adapter drivers. Atheros AR5007EG wireless network adapter. After downloading and installing, the computer doesn't recognize any wireless networks. I know mine is working and also know there are at least 4 others in the apartment complex. That being said I know it is on the computers end. I rolled back the driver to the one that worked with no success.

Laptops specs are as follows:
Vista home premium SP2 32bit
Toshiba satellite L355D
AMD Turion X2 dual core mobile RM-72 2.1GHz
Atheros AR5007EG version (new version)
Relevancy 28.81%

ok first off i got this board second hand from my brother he couldnt get it to work at all however he thought it was a video card compatability issue He had a ATI Radeon card and its an NVIDIA chipset on the board Now that ive giving a tiny bit of back ground ill give you the systems specs or atleast the specs itll be once its working and can see things CPU Intel core duo E RAM GB DDR x OCZ REAPER Motherboard As mentioned EVGA NVIDIA i sli GPU GEforce GS PSU Sparkle W gold class TB for storage and a GB + no =( sli output board video Evga 680i Nvidia for the OS Thats whats in my box and the box itself is a Rosewill Evga Nvidia 680i sli board + no video output =( CRUISER So far everything looks like its powers up right and and the HDD spins up it seems like its posting correctly i jus cant get anyvideo out of it Any suggestions would be helpful also keyboards will not work in any usb port and on the mointer it says entering power save mode it detects the cable being there but does not get a signal ive tried multiple keyboards and multiple video cables nbsp

A:Evga Nvidia 680i sli board + no video output =(

sounds like it's just a faulty board... it doesn't matter if you have a single ATI or NVIDIA card, it should work with either
Relevancy 18.06%

This weekend we re going to have an quot old folks LAN quot mostly AoE OpenTTD amp Quake So now I am setting up a couple of notebooks "Whitebox" XP New of drivers laptop; lack setup that really needed a makeover I New XP setup of "Whitebox" laptop; lack drivers ran into troubles with a quot Whitebox quot -machine belonging to my New XP setup of "Whitebox" laptop; lack drivers home master She says the company is Chinese and went bust well I can t find all I need and I am running out of time Does anybody know the producer I lack amongst others the graphics drivers see screenshot Funny thing is that I wrote that down beforehand Mobile Intel GM GMS GML and I installed the supposedly proper software But it s not working I even copied the system drivers-folder of the former XP-installation but I can t find the right drivers there There is also a problem with a multimedia-device and I don t get it So if anybody knows the machine or has quick solutions I would be VERY happy nbsp

A:New XP setup of "Whitebox" laptop; lack drivers

If you haven't already, try going to Intel's website and download the drivers for the 915 chipset.
Relevancy 20.64%

Hi Guys,
Can anyone help me with this.
I have a geforce 9600gso card that has been working fine for a year or so.
A few days ago while ALT-TABBING between a game and website my PC crashed and when it came back on the graphics card wasnt working correctly.
In the device manager it shows an error code 43 and is saying the the drivers installed correctly but wouldnt run.
I have updated the drivers and reinstalled the card a few times.
Ocasionally it comes back up working correctly, but seems to crash again after a few minutes (if i run a game or the screensaver comes on.)
Oh yes, running Vista 32 bit

Relevancy 29.67%

Hello I have a desktop with motherboard Via KT CF- ruinign on windows xp I had a MB memory and the computer was running very slow with lots K7VTA3 ECS RAM v8) fully isn't recognized (board of RAM isn't fully recognized (board ECS K7VTA3 v8) lags I decided to buy some more memory and bought the lot of two kit Kingston KVR X C AK total of GB I opened the computer and inserted the two memory sticks on the motherboard and switch on the computer As it runs BIOS says only MB Ram and not GB RAM Other times it reads sometimes says MB and one time said MB RAM Its very strange this Whats going on I dont know but the site says that the board accepts DDR SDRAM Did I bought a wrong set of memory sticks or is it something wrong in the computer data from Everest software ID Motherboard -KT CF- -K VTA C- Motherboard ECS K VTA v Physical Memory Total MB Used MB Free MB Utilization North Bridge VIA VT Apollo KT Thanks Boto nbsp

A:RAM isn't fully recognized (board ECS K7VTA3 v8)

I dont know but the site says that the board accepts DDR200/266/333 SDRAM.Click to expand...

You bought DDR400 so I'd say your RAM is not supported by your motherboard. Also, the voltage standard for your motherboard is 2.5 volts. Your RAM needs 2.6 volts although it should still run if your motherboard supported it in the first place. You might be able to bump up the voltage in the BIOS but I can't say for sure.
Relevancy 21.07%

ok guys i believe it was an audio driver. it was called SoundMax. i thought it was something else so i deleted and come to find out i have no more sound! i just wanted to know if anyone can help me please!

A:Deleted audio drivers, please help

Use System Restore to a point before you deleted the audio driver.
Relevancy 28.38%

Okay, my board is as described. I have a black bank and a blue bank. I plan on upgrading to 8 gigs of RAM this spring. With my motherboard's setup, would I benefit more from 2 sticks of 4 gig RAM or 4 sticks of 2 gig RAM?

A link to my board:

A:Dual-channel capable board, with 4 DIMM slots in 2 different colors--questions

Link us to your motherboard's website. The manual should contain the correct memory configurations.
Relevancy 20.64%

I've just finished installing a new motherboard (Asus P5P43TD) into a friend's computer about 2 hours ago and have been unable to get the USB ports working. I installed the chipset drivers, Ethernet controller drivers, and Asus EPU-4 drivers, but the USB ports simply do not function. Which means I have to do everything with a friggin keyboard. That has made things interesting to say the least. I grabbed the most recent chipset drivers off of Asus's website and it installed the SMBus drivers (which I beleive are responsible for USB) and everything else. Any help is greatly appreciated.

Motherboard: Asus P5P43TD
Video Card: XFX 8800 GTX
Sound Card: Creative Extreme Gamer
OS: Vista 32 bit
Hard drive, Optical drive, and PSU are unknown.

A:USB ports not working after drivers installed

Give this a shot. See How to Reinstall Your USB Controllers and Motherboard Chipset Drivers
Relevancy 20.64%

I have been on a couple of sound device installed but audio drivers all Help no - no XP forums but none as yet have been able to help fix Help no sound XP - no audio device but all drivers installed my no sound problem I had a Trojan a good few month s ago and after installing avg getting rid of the virus and then uninstalling avg i lost all sound Installed sound driver and codecs again but still nothing - now i have a yellow exclamation mark over the multimedia audio driver Please please some one help - Please see system info below OS Name Microsoft Windows XP Professional Help no sound XP - no audio device but all drivers installed Version Service Pack Build OS Manufacturer Microsoft Corporation System Name THAMILIN- System Manufacturer Packard Bell NEC System Model System Type X -based PC Processor x Family Model Stepping GenuineIntel Mhz BIOS Version Date American Megatrends Inc B SMBIOS Version Windows Directory C WINDOWS System Directory C WINDOWS system Boot Device Device HarddiskVolume Locale United States Hardware Abstraction Layer Version quot xpsp - quot User Name THAMILIN- kabellan Time Zone GMT Standard Time Total Physical Memory MB Available Physical Memory MB Total Virtual Memory GB Available Virtual Memory GB Page File Space GB Page File C pagefile sys Name C-Media AC Audio Device Manufacturer C-Media Status Error PNP Device ID PCI VEN amp DEV amp SUBSYS amp REV A amp AAA amp amp I O Port x C - x C FF I O Port x C - x C F IRQ Channel IRQ nbsp
Relevancy 28.81%

So I recently had my main computer crash and break to the point I need a new computer so I figured I'd make it worth it this time.

Here's the deal: (add the www to see it)

Everything on there seems decent but I am curious about the board itself. Would the Intel Desktop Board DP55WB Motherboard be good for gaming, which I wish to use my computer mainly for. I have at most a 700 dollar budget and this seems like a nice deal for it. I plan on putting a Geforce GTX 580 graphics card in it as soon as I get the money as a little side note if it matters.

A:Intel desktop board DP55WB motherboard for gaming?

Pyron92 said:

So I recently had my main computer crash and break to the point I need a new computer so I figured I'd make it worth it this time.

Here's the deal: (add the www to see it)

Everything on there seems decent but I am curious about the board itself. Would the Intel Desktop Board DP55WB Motherboard be good for gaming, which I wish to use my computer mainly for. I have at most a 700 dollar budget and this seems like a nice deal for it. I plan on putting a Geforce GTX 580 graphics card in it as soon as I get the money as a little side note if it matters.Click to expand...

I'd suggest looking at the same chipset, but in either Gigabyte or Asus brands. Intel boards are fine, as much as it goes, but the BIOS is very limited as to configuration for different memory, and overclocking options. Intel really markets it's boards as mainstream items, intended for average users and businesses, they're not really aimed at the enthusiast.

The feature set can vary widely from board to board, and you should have a look at these pages to see which board has the capabilities you need;

Asus P-55; 600008216&IsNodeId=1&name=Intel P55

Gigabyte P-55; 600008216&IsNodeId=1&name=Intel P55
Relevancy 21.07%

should i be using the manufacturers (powercolour) driver or the latest ATI driver? the card is a powercolour 5870 pcs+.

thanks for any help.

A:Should I use ATI's drivers or the manufacturer?

I would go with the driver from the AMD/ATI website because it will be the latest available. I happen to have a Powercolor Radeon HD 5780 PCS+ in one of my PCs and that's where I go for drivers.
Relevancy 20.21%

A few months ago I updated my copy of Windows Vista to Windows technically I didn t use the UPDATE option I instead used the New Partition option Big mistake I ve been finding Ever since I ve been trying to recover my programs and drivers and it s been continuing with some degrees Issues drivers Asus conversion 7 updating after Windows of success However I Issues updating Asus drivers after Windows 7 conversion ve been having a great deal of trouble obtaining and installing the Windows Asus drivers Just before posting this I had attempted to Issues updating Asus drivers after Windows 7 conversion install the apparently latest version of Asus Live Update downloaded directly from their website and it gave me absurd error messages that were Issues updating Asus drivers after Windows 7 conversion just a series of symbols and then said quot No ASUS motherboard Installation will be abooted now quot Literally that s what it said Basically I m trying desperately to recover my Asus drivers so I can once again retain the full functionality of my laptop Asus download page is of course totally useless in this endeavor providing little or no support only including the insanely vast array of drivers to download And now my questions -Is there some way to obtain these drivers much more easily -Is there some sort of programming confliction such as incompatibility with the driver download and Windows that is preventing the InstallShield Wizard from working correctly I am using an Asus X V b and I m trying mainly to recover the following drivers all drivers that have directories in the ASUS folder in my program files -Asus LifeFrame -Asus Live Update -ATK Hotkey -ATK Media -ATKOSD not sure what it is -InstantFun -SmartCore -SmartLogon -Splendid All in all I simply need help getting my drivers back I ve been losing my mind trying to retrieve them and am looking for the aid of someone far more technically advanced than myself Any help is appreciated Thank you nbsp

A:Issues updating Asus drivers after Windows 7 conversion

Finding drivers

I have been using the free download program called 'Drivereasy' from ''. I use the version 2.6.1 which scans your PC, lists all the drivers missing or needing updates, and you can choose to download and/or install. In fact the free version is quite slow to use, but you can pay for a faster version if wanted. I find the information it gives about the drivers is accurate, so you can get them elsewhere if you like. The biggest drivers on my PC are the Graphic card, but I know to get that one elsewhere. This site does not charge for the downloads either, unlike many. Worth a try.
Relevancy 20.64%

Hello everyone,

I am new here and hlping that someone could please help me with my problem. I have a acer aspire 5810tz , I was running windows vista but upgraded to windows 7 my internal microphone stop working. I downloaded the drivers for the realtek microphone and restarted my computer. Well the microphone works but the internet will not. I have a data card that I used thru alltel to get online. If I remove the realtek driver that I added my internet goes back to working. I am not understanding what I am doing wrong. I went to acer and that is where I am doing loading the drivers from so I dont think I have the wrong drivers. Could someone please help me with this problem.

A:Downloading drivers and Internet not working

That is a common problem with ACER... VISTA Drivers and Windows 7 drivers are different, and they generally do not make updated drivers for machines designed for VISTA and converted to Windows 7
Relevancy 21.07%

hello, so im a noobie when it comes to fixing my comp. i have reinstaled windows and i have driver robot and updated all my stuff yet my sound still wont work. i have tried going into control panel and tried to add hardware and nothing. i have tried "Go to Control Panel > Administrative Tools > Services
then find the Windows Audio Service in the list
If it is stopped, restart it" i dont kno anything about my comp other than its an hp lol. i dont have a credit card to download Everest. im runnin out of ideas and i dont want to by a new comp! please help! it would be much appreciated



A:No audio after drivers installed

Are you using a laptop, or a desktop? What model HP are you using (if it's a laptop, the model # will be on a sticker located on the bottom of the laptop. If it's a desktop, it should be on the front, or back)? Instead of Everest, try Belarc advisor's free download .

What OS are you using?

Right click on "Computer" on the desktop, and select "Manage". Under "System Tools" on the left side, select "Device Manager" and look to see if your sound card is working properly. Don't worry about the services just yet.

As for your Driver Robot program, I suggest you uninstall it and get a refund. Get a good antivirus program as well, and follow the steps listed here
Relevancy 20.21%

Hello everyone I have been trying to fix this random problem won't stopped install soundcard working, Onboard drivers on my computer and I haven t been able to find any Onboard soundcard stopped working, drivers won't install solution The only explanation that I can find is that startup got interrupted and something got screwed there I haven t Onboard soundcard stopped working, drivers won't install changed anything to the computer no recent updates My computer QuadCore Intel Core Quad Q MHz x GB RAM VISTA Motherboard Intel Dragontail Peak DP DP PCI PCI-E x PCI-E x DDR DIMM Audio Gigabit LAN IEEE- NVIDIA GeForce GS MB Intel IB ICH - High Definition Audio Controller A- I tried - Reinstalling the drivers from the CD it tries to install and then says the device isn t present - Donloading drivers from Intel same - Enabling disabling on the BIOS doesn t make a difference - Device manager doesn t even list any audio devices when prompted to detect can t find any System info cannot detect any either but Everest tools does detect it I would Onboard soundcard stopped working, drivers won't install appreciate any help this is a strange situation because I had the same happening on an HP laptop no solution there either Would a different OS make a difference I am also thinking about buying a cheap PCI sound card would that fix my problem Thank you in advance nbsp

A:Onboard soundcard stopped working, drivers won't install

Ah, I had a similar problem once and nothing seemed to work.

In the end I convinced myself that it's time to format my HDD and reinstall my OS anyhow. lol
Relevancy 29.67%

how do u know if u have on board sound card on ibm

A:How do you now if you have on board sound card

The easiest recognition sign would be 3.5mm jack plugs on the rear panel of the motherboard.
3 (Green, blue, pink) is common on older boards, 4, 5 or more commonly 6 jacks for newer (and 5.1 +) sound codecs.
If you post some details of the system/board the forum will be able to give you a more definitive answer.
Relevancy 20.64%

Firstly, am new to this site so sorry if this has been posted before.

I have a problem with my USB memory stick. I was using it fine with no problem but now when i plug it in a bubble comes up saying it has not been recognised and has malfunctioned - when i click on the bubble it says unknown device and then when i click on that it says in device status box that no drivers are installed. How do I get drivers? Memory stick was free from an ICT company, laptop is a toshiba?

What do I do, memory stick has so much work on it that I need!

Please help me!

Am running XP, my other memory sticks work???

A:USB flash drive malfunctioned? No drivers?

I have this issue sometimes with a SDHC card I use for readyboost in Windows 7 on my laptop.

I find that ejecting it via My Computer (right click the icon and eject) or from the "Safely Remove" hardware icon on the taskbar, and then re-inserting it solves the problem and its recognised again.

I sometimes have to do it several times though before it recognises. I'm sure there is an easier solution, but it works for me.
Relevancy 29.24%

Wondering if anyone has tried a non-Nocona, E-ATX dual Xeon board in the HAF 932. I'm talking one of the newer Dual-Xeon boards. I know I lose the single-CPU ATX back opening, but I'm more concerned about if it actually handles a dual-Xeon E-ATX board.

Thanks for any help.
Relevancy 21.07%

I have two webcams, one by Nexxtech and another by MIOS - rather non-descript USB Camera.

The Nexxtech camera seems to need a driver - I have installed it. But the MIOS likely uses the one in Win XP SP3. Why is that? Why won't one driver work for both cameras?

Rationale: I want to develop some software to process the live video, but could one piece of software be used for both cameras?

I am a noob about web cams and video processing.


A:Two webcams - why separate drivers?

Hi louarnold :wave:

A few comments

The drivers which can be used by a web cam are dictated by the web cam manufacturer
The mfr programs a set of "IDs" into each of their devices (such as web cams). The device sends its IDs to Windows. Windows uses these IDs to find suitable drivers which will match (i.e. "support") the IDs. (Window can find zero, or one or even more then one match!)
> If Windows finds zero driver matches, you get a "No Driver Found" type of error
> If Windows only finds one driver match, it uses that driver
> If Windows finds more then one driver match on your machine, Windows chooses what it thinks is the best match of all the matching choices it found on your machine.

See Plug and Play Overview: How Windows Finds Drivers for USB Devices

I am a noob about web cams and video processing.Click to expand...

Am just curious though, if you say you're a noob, will you know how to do all the video processing to do what you want?
Relevancy 20.21%

ive been searching for 2 days trying different things
first problem was driver enabled but has not been started fixed that by getting rid of the ghost soundcards in sound/media
now my driver are enabled and functioning properly
but im still not abled to access the playback / recoding drop down

ive done sfc /scannow ---no problem
combofix--- no probelms
even repaired xp from disc in dos (reinstall over current)

my onboard sound is enabled
ive tried soundblaster live installed drivers (no problems) ---no drop down to select same as above
my midi is working
my soundman has audio test for speakers and it plays sound on my speakers
my pnp emu is running on startup auto

im not able to get msinfo32 to run havnt tried it in safemod yet
my dx9 txt attact

current drivers are ALC850_V5870_WHQL
on a8n-sli_premium motherboard
winxp sp2 pro

A:Realtek 97 drivers working no sound grayed out boxes

i got my msinfo32 to work

posted txt
posted images
Relevancy 20.64%

I have an ATI Radeon HD3650 AGP series card in my PC & it plays most games great, but the only thing is the support for drivers.
I've tried quite a few & there's always a problem, so i currently have a hot-fix installed.

Anyone know of any custom drivers for this card ?

A:Anyone know of any good custom drivers for ATI Radeon HD 3650 AGP?

You probably won't find any new drivers for AGP, especially since you didn't mention OS type. If you still have the CD that came with your card that may be the best you can do, sorry.
Relevancy 28.38%

I plan to upgrade my video card from geforce 9500GT to geforece GTS250.. my mother board model is gigabyte GA-M61PME-S2P..

A:Is the GeForce GTS250 compatible with a DDR2 board and PCIe slot?

Powersupply? Just making sure...
Relevancy 18.49%

Hello All I have seen similar threads here but my problem is slightly different I have ASUS P S X-MX which have built in audio of Realtek AC I am using Windows XP SP for quite a time and everything was fine unless i tried to install an updated driver for my sound After drivers properly AC'97 but - Realtek installed no & services running audio audio updating i got Code error device cannot start I uninstalled the drivers Restart my PC and then installed my previous version of drivers Everything was fine and i can see volume icon in task bar But when i tried playing an audio file Realtek AC'97 audio - drivers installed properly & services running but no audio there wasn t any sound I clicked volume icon to Realtek AC'97 audio - drivers installed properly & services running but no audio raise it but it was disabled I double click it to open Mixer there are only options normally it use to have lot wave speaker etc Now it has only Wave SW Synth CD Player and No recording device I did try re-installing the drivers again and again but no LUCK I tried using Drivers Sweeper to remove the tracks doing that in Safe Mode and then again Installed Old drivers It all go well but in the end its same situation with sound disabled I don t want to reinstall my Windows is there any way to fix it One thing i noticed is every time I install drivers the sound manager shows up at task bar but in moments it disappears while the soundman exe is running in Processes and I can t find it in Control Panel as well where it use to be Its been hours since I am struggling with that But No LUCK Note My PnP Software Device Enumerator is working fine Any help in this regard will be highly appreciable Thanks in advance nbsp

A:Realtek AC'97 audio - drivers installed properly & services running but no audio

Hi muazzam

Is best to upgrade to SP3 (if only because MS has dropped support for SP2) but can start, for now, looking at your problem while you continue running with SP2

Let's start with these initial steps
1) List any Problem Devices

Make sure all your devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
2) Generate and attach a DirectX report

click Start->Run, enter dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save to your Desktop
In TechSpot, use the paper clip icon to attach the report. (If you don't see icon you may need to first click Go Advanced)
3) If there were no Problem Devices (step 1 above) then also check on your Windows Audio service if Status=Started and StartupType=Automatic

I'll have a look and we can take it from there
Relevancy 19.78%

Hi I have been working on a Dell Inspiron S and am unable to get the video and now audio drivers loaded and working correctly Here s the deal According to the Dell tag info online this cpu uses either the onboard Nvidia nforce SE n video card or an ATI Pro There is no external video card so the Nvidia should be right This is confirmed by programs like HWinfo However someone did install ATI catalyst software at some earlier point At first only the video card driver was not loaded properly and so Vista Home Premium -bit was in VGA-compatible mode I tried to load NVIDIA Nforce WHQL drivers for Vista -bit which completed without errors Upon rebooting though I could see in Device Manager that the drivers didn t take I have also tried Dell s recommended R an executable that loads Nvidia s MCP ver Dell audio not Realtek drivers Nvidia and working Inspiron on video A drivers and no matter what I do Device Manager says I now have an Nvidia video and Realtek audio drivers not working on Dell Inspiron unknown device or a VGA-compatible display adapter Unloading and reinstalling did not help I noticed SP was not loaded so tried installing it to see if that would help It loaded no problem but then I saw as another update a Realtek audio driver update I let it load and now have no audio I have tried both Dell s recommended Realtek driver R which is for the ALC HD audio device and loads Realtek s R audio drivers and a newer R version for Vista that I got from Realtek s site Both install fine but rebooting results in Device Manager disabling the Realtek device If I enable it it wants to reinstall drivers But doing so either fails when trusting Windows to do it because it says I already have the correct drivers OR I can load them reboot and find the process happening all over again It always tells me there is no audio output device installed So far I have updated the BIOS run Driver Sweeper to clean out all ATI and NVIDIA display and physix drivers as well as all sound-related drivers and tried the above in Safe Mode as well Nothing works I am at a loss Both devices are acting as if they are disabled somehow but I see no reason for it in the BIOS or anywhere else Ugh This is very frustrating If anyone can help I would really appreciate it Thanks nbsp

A:Nvidia video and Realtek audio drivers not working on Dell Inspiron

Sounds like to me a fresh installment of Windows vista would help you out the most.
Relevancy 18.49%

Hi Im not really sure if im posting this is or System-start to load boot-start drivers Nvatabus fails the right place or not Im so sorry if im not Here is a list of my computer specs Operating System Windows XP Professional Service Pack BIOS Phoenix - AwardBIOS v PG Processor Intel R Core TM Quad CPU Q GHz CPUs Memory MB RAM Page File MB Nvatabus boot-start or System-start drivers fails to load used MB available DirectX Version DirectX c DxDiag Version bit Unicode My problem is everytime i go to watch any type of video on youtube or other websites like that the video will freeze i will still hear sound then my computer will lock up eventually blue screening i went to my system reports and found that i was having a nvatabus error so i deleted everything to do with my nvidia card and reinstalled fresh still having this same issue I dont know what else to do everything else on my computer thats graphic heavy runs just fine i even play a game called second life in that game we Nvatabus boot-start or System-start drivers fails to load can watch movies streamed thru quicktime and i can watch those just fine I hope theres somebody out there that can help me thank you for reading nbsp
Relevancy 21.07%

Hey all

I'm currently trying to figure out how I uninstall my video drivers, the only option I've found uninstalls the chip-set as opposed to the actual drivers

Any help would be greatly appreciated

A:How to uninstall video drivers

What operating system are you using and what graphics card do you have?
Relevancy 20.21%

Motherboard: ASUS A8N-E
Video Card: ASUS Radeon EAX500
Memory: 1GB
CPU: Athlon 64 X2 @ 2Ghz
Operating system: Windows XP

Here is what happened. I went to the ASUS site and downloaded and installed the latest drivers for the video card. I then restarted as instructed and from then on, I get a blank screen when turning the pc on. I cant even see BIOS.

I have tried using a different PCI slot, a different video card, a different vga and dvi cable, and resetting BIOS but nothing. I have access to another PC and external enclosure if I need to use it. Thanksin advance

A:No video, just black screen after installing drivers, even in BIOS

Please give me some details. The bios doesn't even post because of black screen so would I have to connect the mobo to a different PC and update? If so, how would I update it. This isn't something I've done before but I have enough experience to understand instructions. Thanks.
Relevancy 30.1%

I want to put together two of the new GTX 460 video cards and using an i7-870 proc.

Any SLI mobo recommendations?

A:SLI board recommendations for the GTX 460 and i7-870

Hi Tom,
what price range are you in here?
......Hmmmmm, something tells me Chef will be here in a minute with that 4 recommendations.
Relevancy 28.81%


I want to turn on my PC automatically during late hours so that I can do some downloads and maintenance works on my PC automatically!!
But I cant find an option for RTC alarm enabling in this BIOS!!
Whats wrong with this Mobo?

Will any one help me?
Relevancy 21.07%


I have Asus P4C800 motherboard with integrated sound.I downloaded drivers(soundmax) from asus web page.
Everything installed properly,but there is no any sound.
There is no Startup sound,try to play music on winamp but here is no sound,NO SOUND HELP !! i checked audio configs but everything was ok,no mute.

Please help.

A:Drivers installed but no sound

I uploaded dxdiag info.
Relevancy 20.21%

Hello I have a IBM Think Pad T laptop with Win XP sp installed and i don IBM No drivers installed,ThinkPad T42 updated all and are labtop sound t have any audio I use to have win but then one day after turning the PC off i got en error message no ADI codec is installed i tried everything and nothing worked i also looked it up on Google they know it at and No sound and all updated drivers are installed,ThinkPad IBM T42 labtop i see cases like this No sound and all updated drivers are installed,ThinkPad IBM T42 labtop but no results and top of that most of the people don t have there drivers i do and win is telling me that its working fin so i seed its win that s when i installed win XP and the same issue came up only this time i was able to get the error code off now win claims that every things working fine but i still don t have audio I got a DxDiag No sound and all updated drivers are installed,ThinkPad IBM T42 labtop attached for better assistance Please HELP If any more info is needed then please feel free to ask PS im new at this nbsp
Relevancy 29.67%

Hi I have been having problems with my hdd s circuit board on my dell d I aint sure what happen I think it Toshiba circuit HDD board was just my bad luck Anyways I was wondering if its possible of saving the HDD by switching the board with one of the same model boughten brand new off the internet Also I forgot to mention that I put a master password Bios password also applied but thats not a problem since I am able to enter my password on the hdd so no could get into it without my consent just in case it got stolen I am just wondering if that will screw anything up with the new circuit board The name and model of the hdd is Toshiba Toshiba HDD circuit board MK GAX I hope someone can give Toshiba HDD circuit board me some advice on this topic because I don t want to wast my money which ever way I go buy a new hdd or just a circuit board Please respond and thanks in advance nbsp

A:Toshiba HDD circuit board

Come on people, just don't let me hang. I need something, thoughts, ideas, and/or anything else. I just don't want to leave with nothing...
Relevancy 20.64%

Well I have a 3 year old pc with intel 82915g/gv/910gl chipset

if I install windows 7 , will my chipset work

I have drivers just for xp, I searched for even vista driver, but I didnt found them.

plz help

A:Windows 7 Intel drivers support

They will be on the website of the manufacturer... or with help from their tech support site.
Generally the chipset will work... but others can be a frustration.
Chipset upgrades, if needed, are found on the Intel website... It is a struggle to find where.
What is your brand, model, and configuration.
Relevancy 29.67%

I will be upgrading my system in july and was wondering if anyone can recomend a new cpu, motherboard and DDR3 sims. I currently have an E8500, ASUS P5N-32E, GTX275, Corsair TX650 PSU and 4gig of DDR2. I was thinking of going with the an Intel Core i7 930 2.80Ghz (Bloomfield) (Socket LGA1366). Can anyone recomend a good board around Ģ150-180 that will fit this CPU and also some DDR3 sims?

A:New CPU, board and memory time

The Asus P6X58D-E is a great motherboard at your price point.

Are you planning on going with 6GB of DDR3 memory to utilise the CPU's triple channel memory controller? What's your budget for the memory?
Relevancy 21.5%

Hello Everybody. I have a Net Vista 8703-41u. I reloaded windows and now I can not get the sound to work. It is not the driver as it gives error message saying something about a bus issue. Is this a problem that would happen if the chipset isn't loaded. Can somebody clarify for me?


A:IBM drivers

Does anybody have any ideas for this issue? would appreciate it. Thanks
Relevancy 20.64%

hi all, i firstly are pretty new to computers!, but recently i reinstalled xp home edition, but on completion i found in device manager some features had ? in yellow, sm bus controller, unknown device,video controller, video controller (vga compatable), & my pc is not running correctly at all i think due to these missing drivers?! can anyone please shed some light where i have gone wrong? thank you

A:Recent reinstall lost drivers help

Reinstalling Windows will require the installation of those drivers. You didn't do anything wrong. It just is. Go to the PC manufacturer's (Dell, HP, Acer, etc.) for most of those drivers if you don't have a driver CD. If the PC is self built or custom built, then go to the motherboard maker's website for those drivers. Go to the graphics card maker's website for graphics drivers.
Relevancy 21.07%

I have a motherboard that came from HP xw3100. Part number is 323091-001. HP d530 has the exact same mobo, based on the part number.

Strangely, on HP's website xw3100's BIOS and drivers have not been updated since 2003 whereas d530 has more recent versions. So, can I use the BIOS and drivers for d530 on this?


A:HP mobo BIOS and drivers

If your Computer was manufactured in the Model run that you quote as "2003 era" then this is your BIOS driver. The difference between the two MoBo might not be that significant but if you really want check get a magnifying glass and check all the stripes on all the DIODES. One different colored line or different combination of the all the same colors but in a different sequence is an actual difference in manufacturing technique. Maybe you should use a microscope just in-case the difference is only that big.
I use a BIOS driver for my Gigabyte GA-8GE800 Pro MoBo that were last released in 2004. I update with these in-case my current drivers become corrupted eg. refresh to make new-like
Relevancy 30.1%

Hey everyone!

I know this might not be possible but I'm wondering if you can uses two SLI cards, but use the on board port to push the output video. I have two 9800 GT cards with dual DVI connections. The motherboard has a HDMI output and I would like to hook this pc to my HDTV. I can hook the the on board port just fine but the system doesn't use the graphic cards at all. Is their a way to make the graphics cards work when their ports are not in use? Thanks in advance!

2 X 9800 GT
1220 modular power supply
Dual core AMD 3.2 GHz
2 X 500 GB hardddrive
4 GB of RAM

A:On board plus two SLI cards

obviously it wouldn't work. you cannot expect the graphic card to output the display to onboard HDMI port right? it's time for DVI to HDMI converter.
Relevancy 28.81%

How do i fix or enable my system board Dell Latitude C640 on my laptop ?? Question US Marine in Iraq needs help azap!!!!!!!Sempre Fi USMC

A:How do I fix or enable my system board on my Dell Latitude C640?

You'll have to explain what is "system board" and what exact problems you're having.
Relevancy 21.07%

LookinAround I need your help again, I moved for a new job and in the process lost the disk containing the audio drivers you made for me. Here is a link to the post involved. Any way you can help will be greatly appreciated. Thank you !!

A:Lost drivers

You can probably pick up the audio drivers by running Windows Update in the custom mode and download and install all critical and hardware updates listed
Relevancy 21.07%

I am looking for the oem drivers for a cicero cpu. Model is ca113a-1, specifically for the ehternet driver. Cant find these anywhere without going to Futureshop.
Relevancy 28.81%

Hello all I m new here almost as new at poking around inside my computer at this point its nothing lost nothing gained I have read several hundred posts of others who also fell victim to these substandard machines An e machines label wont be on my desktop again even if its case is blotted out with whiteout Anyway enough rant I m here for your help I have an model T amd athlon failed board victim Unknowing emachine, 754/478 socket replacement, of power supply that took the motherboard with it originally a - bit Unknowing victim of emachine, board replacement, socket 754/478 Mhz gb x machine msi MotherBoard I have looked at options and due to purpose or use of it I remain torn as to the best way to replace it seems Unknowing victim of emachine, board replacement, socket 754/478 Cputopia com On Sale has a motherboard basic single core board processor and processor fan for a Unknowing victim of emachine, board replacement, socket 754/478 bit over a hundred dollars dependent on options selected they also have a box case processor board and power supply for around dependent upon how equipped while the power supply upgrade is at one page its at another No big deal about that Anyway my other option is to get a sole independent board with the same socket as my oem processor motherboard and reuse my Atlon Processor - HD - DVD-Cd and new windows program as such Now the crux of the problem is I have seen T quot s listed here and elsewhere as having come from the factory equipped as socket and processor as well as How do I know or how can I tell which one I have I need to compare performance of the T - socket to the Sempron quot its been suggested this Sempron also comes in a variety of speeds and cores some better some worse than the Atlon it is dependent on the encoded processor suffix quot No description of such is available with the advertised replacement board and case at cputopia and I certainly don t want to go down or backward in speed or performance There are no performance specs advertised with this Cputopia com replacement board case cpu fan or other optional parts available either essentially no sepec no matter what I buy of the sempron All replys will be appreciated my budget doesnt give me room for errors do it once and do it right the first time wish I had been this cautious when I bought the emachine but budget was not as bad as now come Halloween I m gonna put lipstick on it put it outside and call it a pig with a big emachine billboard Regards to all here Leo nbsp

A:Unknowing victim of emachine, board replacement, socket 754/478

Dude, get a grip. I know less about computers now than before I read your post.

I thought that socket 478 was Intel (Pentium Celeron), now I come to find out that it's AMD.

An AMD Sempron 3000 only comes in one speed, if it's another speed, then it has a different number.

All of the s*** you mention is beyond obsolete, so maybe it's time for a whole 'nuther computer. Please, I heartily suggest that you avoid attempting to build a machine, at least in your current state of mind.

I don't think that any of us here are really equipped to deal with the anxiety, angst, or incoherent and rambling thought patterns you have exhibited thus far, let alone what you're trying to pass off as sentence structure.

BTW, my Emachines T-5026 just reached its 5th birthday. If you'd like to check in and wish it many happy returns, (pun not intended), here's the link;

I would argue that it is not really possible to be an "unknowing victim" of Emachines.

You bought it because it was cheap, cheap s*** breaks. So where's the surprise, the mystery, or the unpredictability?
Relevancy 29.67%

I've got an old ECS Elitegroup PF21 extreme motherboard. Now ever since I reformatted I have had no sound from my on board audio. The only way I have been able to was through my USB headset. I've never formatted a computer and it was my first time. Everything works perfectly fine and I have no problems other then this. Does any one know what could have gone wrong?

A:On board audio not working

Download the drivers from the motherboard's support site here
Relevancy 55.47%

The mother board is an ASUS P5Q? I know the adapter is working because I can hook the cable that comes from the case to another sata slot shut down turn the enclosure on and boot and I have a third hard drive. But that is not how I would like to do it. If the mother board would recognize the enclosure it would give me an icon in the tray to shut it off and I would not have to reboot to back up something.

Thank u for any help
Relevancy 20.64%

I can't explain why but suddenly none of sound drivers including the Windows defaults are showing in the Control Panel for sounds or audio. I've reinstalled the driver for my Delta 44 card three times, ran repair on XP Pro twice and still no show or sound. All drivers are listed as working in Device Manager. I see on the internet that this is not uncommon, but how do you fix it?

Saba Raba

A:Sound drivers not showing in XP Control Panel

Hmmmm.. Are you saying the default Sounds and Audio is also missing from Control Panel???? Is your sound otherwise working OK? It's just the stuff missing from Control Panel???

I don't know i have an answer.. but here's some info/things to try
> Note the "drivers" are what you see in Device Manager (so good they're still there!)
> The stuff in Control Panel aren't the drivers.

To try restoring the Control Panel applets try
> Look in Add/Remove programs. Do you see an entry for your Delta 44? Uninstall it
> Reboot and then try reinstalling the Delta44 stuff

Also, you should also be able to start the standard Windows Sound and Audio applet by Start->Run, enter: mmsys.cpl then click OK