Windows Support Forum

HP NX9105 Laptop Synaptics Touchpad not working at all

Q: HP NX9105 Laptop Synaptics Touchpad not working at all

My first post Hopefully NOT one of many I recently got a secondhand HP working not HP Touchpad Laptop NX9105 all Synaptics at NX laptop I reformatted the hard drive and installed Windows XP SP All worked fine except the touchpad isn t working I could not see a driver for it so I went onto HP support website and downloaded the Synaptics driver sp The install got interrupted with the message quot This Synaptics pointing device installation package does not support one or more of your pointing devices and will not be installed quot I then tried the Alps HP NX9105 Laptop Synaptics Touchpad not working at all driver sp and that installed is visible in the Add Remove Programs but the touchpad still didn t work and it doesn t appear in either the Device Manager or in Control Panel- gt Mouse- gt Hardware tab Next I tried to install another version of the Synaptics driver sp This one installed so I then rebooted the laptop The touchpad still doesn t work but now I have the Synaptics Device Settings tab in my Mouse settings The problem is that all the buttons are grayed out and no devices are listed Is it possible that this is a hardware fault or is there anything else I need to download I m really stuck now please help nbsp

Relevancy 100%
Preferred Solution: HP NX9105 Laptop Synaptics Touchpad not working at all

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: HP NX9105 Laptop Synaptics Touchpad not working at all

well heres your drivers....

You touch pad should automatically just "work" with no special drivers...

Mabe it broke...

https://forums.techguy.org/threads/hp-nx9105-laptop-synaptics-touchpad-not-working-at-all.836101/
Relevancy 82.13%

Hi. My touchpad  is not working. I tried all uninstall and reinstall the driver but doesnt work. I hope you guys can help me.

A:Synaptics Touchpad not working

Hi, You could try the following. Hold down the Windows key and press R Into the Run window, type devmgmt.msc and hit enter. In Device Manager, expand Mice and other pointing devices.  Right click the Synaptics device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall. When this has completed, shutdown the notebook and then disconnect any peripherals ( ie usb mouse etc ). Unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter. Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter. Let windows fully load and see if you have basic touchpad functionality - if you do, download and install the Synaptics driver below. http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58572.exe When this installation has completed, restart the notebook again. Regards, DP-K

http://h30434.www3.hp.com/t5/Business-Notebooks/Synaptics-Touchpad-not-working/td-p/5606621
Relevancy 82.13%

Hi, I have a Dell Inspiron B130, yes old I know. Long story short, let a friend borrow it who prefers a regular mouse, they installed it. Now I cant get my touchpad to work AT ALL. I have gone through Dell website and downloaded driver, nothing is working. Under my Control Panel-Mouse- under hardware all I have is "HID compliant mouse" I do have a tab that has the Synaptics symbol and the word buttons, no option to enable it anywhere. If anybody can help me it would be greatly appreciated!!
 

A:Synaptics Touchpad not working at all

it maybe one of the functions keys - on Toshiba and HP I know the function Key F9 or F11 with FN key
so you hold the FN key down (on toshiba a drop down menu appears at the top of the screen ) and then press f9 or f11 or any key that has a symbol that may look correct
that will toggle between enable and disable the touch pad
 

https://forums.techguy.org/threads/synaptics-touchpad-not-working-at-all.982159/
Relevancy 82.13%

My computer is a Toshiba Satellite L and has a Synaptics TouchPad I use Windows Vista For a few weeks I had been getting messages saying quot Synaptics TouchPad has stopped working click here to solve the problem quot or something similar I didn t think anything of it because the mouse was working not Synaptics working. TouchPad fine so I just hit the quot X quot I m not even sure that is a part of the problem even because it has stopped coming up Lately the mouse will work fine and after being on the computer for about an hour or so the mouse will slowly stop working I can still click and when I tap the touchpad that will still click I just won t be able to move the mouse Restarting the computer does not fix it Usually I just plug in a mouse Synaptics TouchPad not working. and use it for - minutes and by then the mouse is working fine again Any suggestions nbsp

A:Synaptics TouchPad not working.

Press FN and F7 at the same time. Post back with results.
 

https://forums.techguy.org/threads/synaptics-touchpad-not-working.935529/
Relevancy 81.27%

Recently my laptop was repaired because the display was not functioning correctly. When I got my laptop back I reinstalled windows completely. Using HP Support Assistant I updated all my drivers. Everything worked fine except my touchpad is not working anymore. I reinstalled the Synaptics driver(version 19.0.19.1) multiple times but my touchpad still not works. Besides that the touchpad is not listed in Windows device manager. I don't know what to do to solve this problem. Hope someone can help me! Kind regards svdsande  

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Synaptics-touchpad-not-working-anymore/td-p/5729417
Relevancy 81.27%

I have a HP Pavilion DM4-3099se Laptop with a Intel Core i5 dual core processer and 6GB of RAM. On this laptop is a Synaptics touchpad and uptill now it was working fine. It recently started glitching and now when i move my finger on the touchpad, the mouse moves but it repeatedly stops and then starts moving and then moves in all different directions. I went to the Synaptics website and installed the latest drivers for the touchpad and the installation was successful but the trackpad was still the same way. My external wired mouse works fine right now though. I tried restoring my system the earliest point there was on the list and still no improvement on the touchpad. Please help. Thank you.

A:SYNAPTICS TOUCHPAD NOT WORKING PROPERLY!

Thanks everyone for reading but I already fixed the problem. My computer shipped with two Operating Systems, one being windows 7 and the other being HP QuickWeb. I just booted into HP Quickweb and my trackpad was working fine and then i booted back into windows and it worked perfectly after that. I just though i would let you know and can somebody please close this topic because i dont know how to. thanks.

http://www.bleepingcomputer.com/forums/t/485995/synaptics-touchpad-not-working-properly/
Relevancy 81.27%

A while back my laptop's power cable was fried in a power surge. No damage seemed to have been done to my laptop. but now I fear there may have been some peripheral damage.

In any case, whether sure to the power surge or not, my touchpad is not working when the computer is plugged in. When the computer is not plugged in, the touchpad sometimes works, but it is spotty.

I have no idea how to fix this. Any help?
 

A:Synaptics TouchPad not working (not alt-f7 problem)

try re installing the driver for it.
 

https://forums.techguy.org/threads/synaptics-touchpad-not-working-not-alt-f7-problem.640921/
Relevancy 80.41%

I have researched this problem quite a bit and tried several possible solutions that have worked for many users yet nothing had worked. I have tried several different drivers, tried tweaking settings with no solution in sight.

I am using W7 build 7022.

Can anyone advise?

-JKM

A:Synaptics Touchpad scroll feature not working

Scratch that! I have gotten it solved. My problem was trying the Synaptics drivers. The Alps drivers work perfectly!

http://www.sevenforums.com/performance-maintenance/4905-synaptics-touchpad-scroll-feature-not-working.html
Relevancy 80.41%

I turned on working left not synaptics button touchpad on my months old Acer Aspire One as usual and realised that something was wrong with my mouse The left button simply doesn t work Neither does tapping the touchpad Nothing happens left button not working on synaptics touchpad no matter how many times I push or left button not working on synaptics touchpad tap I can move the cursor around just fine and the right mousebutton still works I can also plug in a USB mouse and use that instead I have checked the mouse properties Under the tab quot Hardware quot the mouse is listed quot Synaptics PS Port TouchPad quot and the unit status says left button not working on synaptics touchpad it works correctly I also checked the preferences and both tapping and buttons are activated and set to normal I have tried restarting removing the battery and Fn-F without any luck I have also tried switching preferences to left-handed - that gave a funny result Both the right button and tapping the touchpad functioned like a right-click except now they could also for instance close a window and open the start-menu The left-button still didn t have any function what so ever Hope someone can help me nbsp

A:left button not working on synaptics touchpad

I would suggest replacing the touchpad and buttons.
 

https://forums.techguy.org/threads/left-button-not-working-on-synaptics-touchpad.852083/
Relevancy 80.41%

Hi there - HP is Synaptics working anymore EliteBook not TouchPad Fol... I've recently started having touchpad problems with my beloved nbsp HP EliteBook Folio m nbsp nbsp The issue The Synaptics TouchPad and its buttons located just below the touchpad do not work at all However the TouchStyk and its buttons located at the top of the touchpad do work perfectly fine nbsp How it started I factory reset the ultrabook using the Windows menu and when it started back up everything was cleaned but the touchpad and its buttons located below the touchpad didn't work anymore External mice do work when plugged nbsp Common solutions that didn't work for me -The orange light at the top-left of the Synaptics TouchPad is not working anymore - HP EliteBook Fol... touchpad is not lit up-Reinstalling the official drivers for Windows http h www hp com hpsc swd public detail sp ts oid amp swItemId ob amp swEnvOid -Installing different versions of Synaptics TouchPad is not working anymore - HP EliteBook Fol... drivers and even some for other brands of laptops-Resetting Windows many times-Running driver scanning programs DriversCloud DriverScanner nbsp Further notes No matters which driver I install the touchpad is always missing in the Mouse properties window The last tab of the window should if I am not mistaken have both the Synaptics TouchStyk and TouchPad listed but only the TouchStyk shows up nbsp Here are different images that might be helpful Successful installation nbsp Driver properties nbsp Mouse properties nbsp It appears as if the driver updated and might have corrupted something or maybe it's overlapping with the old one and it didn't properly overwrite it I'm running out of ideas Someone told me it might have something to do with the Windows old folder which is in my C drive nbsp Any feedback will be extremely appreciated nbsp Thanks and have a great day nbsp nbsp nbsp nbsp nbsp nbsp

http://h30434.www3.hp.com/t5/Business-Notebooks/Synaptics-TouchPad-is-not-working-anymore-HP-EliteBook-Folio/td-p/5762815
Relevancy 80.41%

can u plz s solve it out.mouse pad is working properly but when i want to copy something  copy list is coming nd go way.. i can't click on the copy... the option is coming nd go way.. i cn not prfrom some action. wil typing on keyword also i hve a problm..continue typing nd it stop agin i hve to click on that page then its workin..   

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Synaptics-TouchPad-64-bit-Enhancements-has-stopped-working/td-p/5713496
Relevancy 80.41%

I currently have a HP pavilion tx ae laptop and now and again whilst im am working on stops working touchpad suddenly synaptics it i suddenly get the message synaptics touchpad has stopped working with two options saying close and check for a problem online and close after this message appears the touchpad still works however the scroll bar for the laptop does not this is an inconvenience as i do alot of my school portfolios on my laptop some of which are nearly pages long and i am constantly editing it so i need the scroll bar to save me time and effort When i restart the laptop however this problem is corrected but after a while it appears again and constantly restarting the laptop every minutes is just too much effort to waste on fixing a simple scroll bar When the message appeared I had tried to go onto the mouse options on the control pannel and i got an error message saying unable synaptics touchpad suddenly stops working to connect to the synaptics pointing device driver if you have installed another PS pointing driver please unistall the synaptics driver by clicking on the yes button you then need to reinstall your pointing divce driver for your external device again Do you want to unistall the synaptics driver now I have not installed any synaptics touchpad suddenly stops working PS pointing drivers but I decided to try and reinstall it again just to be sure but when I reinstalled it i had to restart my computer and when i came back on it was working fine for a while The message appeared again and reinstalling it was just a complete waste of time seeing how i needed to restart my computer anyway Any suggestion on how to fix it would my much appreciated nbsp

Relevancy 80.41%

I m on a Compaq Presario CQ laptop with Windows XP and the other day when I hard-shutdown the Synaptics Solved: Working? Touchpad No Longer computer and restarted it booted up with a loud long beep until I forced it to shut down again When I restarted the touchpad no longer functioned and I ve been using a USB mouse since Also occasionally the keyboard doesn t function after coming back from hibernating Solved: Synaptics Touchpad No Longer Working? though a restart fixes this I tried uninstalling and reinstalling the Synaptics driver but although the driver appears to have been installed the Program Files are present Solved: Synaptics Touchpad No Longer Working? as is the Add Remove entry the Synaptics TouchPad is not listed under Device Manager nor is it listed under Device Settings in the Mouse properties under Control Panel Why isn t the driver fully reinstalling back again I ve read on other similar problems to try checking to see if power is being sent to these devices under the BIOS but apparently Compaqs are notorious for being difficult to get into the BIOS so I haven t had luck doing that yet System restore to a day prior to the event didn t help No function keys disable the touchpad and the touchpad light is white not red meaning it s quot on quot I m still under warranty but if I can fix this without having to wait for it to ship back and forth that d be much more preferable Any advice at all would be much appreciated Thanks nbsp

Relevancy 80.41%

I have a new Acer Aspire laptop which has worked fine working stopped suddenly Synaptics touchpad for the past few weeks However I turned it on this morning it worked fine last night to find that my Synaptics touchpad suddenly stopped working touchpad no longer works I don t feel this is a hardware issue in the sense that the touchpad has become unplugged from the internal PS port because the touchpad works for about - seconds after I log onto Windows when the desktop loads up That s the only time it works it doesn t even work at the welcome logon screen After those - seconds something obviously happens that s preventing it from working I thought it might be my Wacom Graphire II graphics tablet which is plugged in via USB However my touchpad and tablet have worked fine together for the past few weeks and have never caused any problems I unplugged the tablet and uninstalled the tablet and touchpad drivers I then rebooted and - navigating around with the keyboard - reinstalled the touchpad drivers and rebooted It still won t work Any ideas nbsp

A:Synaptics touchpad suddenly stopped working

Two things:

1. Does the touchpad have an indicator light that shows you when it is activated? The one on my HP does.

2. Is there an On/Off button above the touchpad...there is on my HP. Did you accidently turn it OFF
 

https://forums.techguy.org/threads/synaptics-touchpad-suddenly-stopped-working.370856/
Relevancy 80.41%

My Qosmio G50-133 lost suddently it's touchpad, it's not working anymore, the mouse panel control shows the synaptics tab without any information in it.
I uninstalled it, restarted my windows 7 with no luck and I just can't find any driver for it on toshiba site or anywhere....

Does sosmeone have a clue ??

A:Synaptics touchpad stopped working on Qosmio G50-133

Solved !

Went to synaptics, downloaded their latest driver for my OS, installed it.

Bye.

https://forum.toshiba.eu/showthread.php?67188-Synaptics-touchpad-stopped-working-on-Qosmio-G50-133
Relevancy 79.98%

Three weeks or so ago I posted here asking for help on how to disable my touch pad on a Lenovo laptop I disabled all the gestures unchecked the 'lock on' feature etc and for a short while thought the issue was resolved It is not Here is my original thread http www sevenforums com search php searchid It was closed but I am still having problems When I drag the pointer across objects it activates them opens pages that sort of thing If I accidentally leave the pointer on the 'previous page' button it automatically does goes back It is driving me crazy I've disabled everything except disabling the Touchpad on Issues Laptop Synaptics touch pad entirely and it's still plaguing me Short of a virus I've scanned a few times with AVG and MalwareBytes and found nothing the only thing I can think is perhaps in disabling the various features I accidentally hit upon a sequence or combination that keeps somehow didn't Synaptics Issues on Laptop Touchpad disable those features I don't want Any suggestions

http://www.sevenforums.com/hardware-devices/387585-synaptics-issues-laptop-touchpad.html
Relevancy 79.55%

Hello I want to thank in advance for any responses I get to this thread I Gateway stopped MT6840: Touchpad working Synaptics have a Gateway laptop model MT It has a Synaptics touchpad A couple of days ago the touchpad stopped working completely I took my laptop out of sleep mode and the icon for the touchpad in the system tray was simply gone I checked Control Panel Mouse Device Settings for the Synaptic touchpad but all options are merely grayed out and the device does not register on the computer anymore I believe I have tried almost everything I first tried Gateway MT6840: Synaptics Touchpad stopped working rebooting I then tried disconnecting my external mouse and then rebooting Then I tried uninstalling and reinstalling the driver from the Gateway website I looked on Google but found nothing of use Alas none of these things Gateway MT6840: Synaptics Touchpad stopped working have worked This is a bit frustrating because although I do have an external mouse it is much more convenient not to have to bring the external mouse around when I transport it And since I m a college student I need to get around with my laptop quite often I don t believe it is anything related to the hardware because it stopped working when the software apparently magically disappeared I would really like to solve this problem If anyone knows of anything please let me know If there is some detail I should mention that would help please also let me know Thanks Minus nbsp

A:Gateway MT6840: Synaptics Touchpad stopped working

Well, I decided to reboot again and go into the BIOS. I did, changing absolutely nothing (even choosing the "discard changes" exit option), logged onto Windows, and the problem was solved.

I have no idea how that worked, but it did.

I can't find a delete thread option, so if an admin is reading this, go ahead and just delete this.
 

http://www.techspot.com/community/topics/gateway-mt6840-synaptics-touchpad-stopped-working.90883/
Relevancy 79.55%

Hi, I own a hp pavillion dv6 7050ca notebook and the touchpad is working but the disable/enable function on the top left corner, gestures, etc is not... The only way to get the functions working is to go to the mouse settings and right when it pops up, the functions work...but right after I shutdown,restart,hibernate, the functions stop working again..my brother has the exact same laptop and doesn't have this problem..we have the same device version(snynaptics pointing device driver version 8.1) and I also checked my msconfig to make sure synaptics is enabled on both startup and services..pls help me! Keep in mind the touchpad still works..just not the gestures and disable/enable square on top left corner of touchpad. And I also tried to uninstall and reinstall the driver but still no luck..any help will be very much appreciated!

A:Hp Pavillion dv6 7050ca synaptics touchpad functions not working?

Hello and welcome to 7Forums!
I would reccomend for you to try This to repair your drivers and such.

Post back results.

http://www.sevenforums.com/hardware-devices/345573-hp-pavillion-dv6-7050ca-synaptics-touchpad-functions-not-working.html
Relevancy 79.55%

Hello Team,I'm facing a strange technical issue with my Laptop TouchPad scroller on HP ProBook 4520S.TouchPad scroll works fine with almost every application except Windows native Apps i.e. Start Menu, Stores, NEWS etc.Its working absolutely with Windows Explorer, Google Chrome, Excel, Word, Power Point but no luck with Windows Native Apps. I have tried almost every thing i.e. Registry Key changes, Changing settings under Devices> Mouse & TouchPad but no luck at all on this. Also tried updating latest driver for Synaptics TouchPad.If any of you are aware of this issue pls advise the fix for it? Detail are as per below:OS: Windows 10 Pro x64TouchPad: Synaptics ClickPad V7.4PS: Earlier it was working fine with Windows 8.1 Pro.Thanks,PS

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Synaptics-Touchpad-Scroll-function-is-not-Working-correctly/td-p/5732853
Relevancy 78.26%

Laptop is an Acer Aspire z with Windows Vista Home Laptop Synaptics Aspire Acer Touchpad Issue Premium -bit fully updated to current I installed an update to Avast's engine and Acer Aspire Laptop Synaptics Touchpad Issue after rebooting when I got to the Windows logon screen both the mouse buttons on both the built-in Synaptics touchpad and an external USB mouse will only select an item but nothing else happens In other words if I click on a user account it selects it but it doesn't allow me to enter a password Likewise if I click on the shutdown icon at the lower right of the screen it just selects it but nothing else happens But I found that if I hit the tab key and then the enter key to select something on this screen then the left mouse button starts working again on the touchpad and the USB mouse When I get into windows the left mouse button on both the built-in touchpad and the external mouse continue to work but the right mouse button on the built-in touchpad doesn't work However the right mouse button on the USB mouse works I have tried everything I can think of to resolve this - uninstalled Avast I'm now using MSE as the anti-virus on this machine - uninstalled and re-installed the drivers for both mouse devices multiple times using different versions for the touchpad one set of drivers from Acer another set from Synaptics - uninstalled the Synaptics device from device manager and let windows reinstall it upon reboot - updated the drivers within device manager it didn't find any that were more current - restored the system back to a system restore point before this started happening - dinked around with all the settings available for mouse - tried toggling FN F the Acer key to turn on off the touchpad functions - tried SAFE mode - same behavior - tried SAFE boot with nearly all services disabled I'm beginning to think this might not have anything to do with drivers since neither mouse device works correctly at the Windows login screen until I hit TAB and then ENTER I think the internals of Vista may be hosed somewhere Acer said that I should do a wipe and reset back to factory state I'd sure like to avoid this Any thoughts Thanks

http://www.vistax64.com/drivers/295969-acer-aspire-laptop-synaptics-touchpad-issue.html
Relevancy 73.53%

I'm looking for software that can customize my touchpad functions, like "tap to click" and some other features found in Synaptics software... The touchpad on my laptop doesn't have anything like it...

A:Synaptics software on non-synaptics touchpad?

Edit: nevermind, re-read title

http://www.techist.com/forums/f9/synaptics-software-non-synaptics-touchpad-277234/
Relevancy 68.37%

Hello,

Since my internal DVD-Burner has died I have a serious problem, regarding my laptop: I can't reinstall by using the bootfunction of a cd.
When I reinstall, I can only do it from an OS (XP) on my c: partition to d: which means I have to keep it there as a dummy for installations.
The BIOS improvements for this laptop stopped a long time ago and there was no "boot from usb" included by the HP tech's!
Is there a workaround for this issue?

thx in advance,
Andreas
 

A:HP compaq nx9105 laptop, how to install windows from ext. Drive

No ideas?
 

https://forums.techguy.org/threads/hp-compaq-nx9105-laptop-how-to-install-windows-from-ext-drive.873753/
Relevancy 65.36%

I have a Synaptics TouchPad v11.0.7 on my HP Pavilion dv6000. I prefer a higher sensitivity on the pad, so I change the pointer options. However, after I restart my computer, the preferences reset to default. I have tried uninstalling and reinstalling the driver but the same thing continues. This is getting very irritating. I have no other mouse drivers on my computer and I am at a loss for a solution. I would much appretiate any help.

Tony Williams
 

https://forums.techguy.org/threads/synaptics-touchpad.771472/
Relevancy 65.36%

Hey, can I uninstall the synaptics touchpad in my laptop, and reinstall it again? Synaptics is not running on start-up but it is activated in msconfig, and CCleaner. Is it safe to uninstall and reinstall it again? If I uninstall it, will my touchpad still operate?

A:Synaptics Touchpad

Hi, kyzersoze.

You'll be fine. On my Toshiba, I've done it at least a half dozen times for various reasons - none which are important here.

http://www.sevenforums.com/hardware-devices/133857-synaptics-touchpad.html
Relevancy 65.36%

my Compaq Presario 2195US notebook touchpad stopped working properly; the pointer moves and the buttons work, but the tap feature is gone. all looks okay in Control Pad/mouse; I checked pointer setting in BIOS and tried AUTO and BOTH. I downloaded and installed the latest driver, just in case, but no change.

help?
 

A:Synaptics touchpad help

The touchpad could be worn out
 

http://www.techspot.com/community/topics/synaptics-touchpad-help.117920/
Relevancy 65.36%

I have two laptops where the touchpad works great but its driving me up the wall. I keep going to places I don't want to go. I need to turn off the touch feature for enter and cannot find it. Is it available yet for vista?
 

Relevancy 65.36%

Hi all. I am having a lot of problems with my touchpad mouse built in .I have sony vaio vpcea36fm i3 hdd 500 gb ram 4 ddr3. As far as i have searched there are no updates for the driver.This is my driver version 6.1.7600.16385. I have tried to uninstall and install with reboot but its still not working.I apprecite all the help

A:synaptics ps/2 touchpad

You don't elaborate what your problem is ? is it working at all or is acting strange ?
Have you checked the BIOS to see if it's disabled ?
Otherwise, you may just have a bad piece of hardware there, take it to a shop and have them open it up and check.

http://www.bleepingcomputer.com/forums/t/400963/synaptics-ps2-touchpad/
Relevancy 65.36%

So I am at the end of my rope with my laptop's touchpad. I can not disable the tap-to-click option, and because of this I am CONSTANTLY clicking on things every time I type or do anything.

Also, the scroll does not work.

I have searched through all of the mouse options and there is not one single option anywhere for tapping or scrolling.

I have updated the driver. I have uninstalled the driver and tried installing an older version of the driver. I can't find anything that will give me these options, no matter which drivers I install.

I am using Windows XP, on a Dell Inspiron 6000. According to the hardware tab, I am using a Synaptics PS/2 Pointing Device.

Please, please, PLEASE help! Please!
 

A:Synaptics touchpad - PLEASE help!

I am not a fan of the touchpads on laptops. I have always disabled them and used a notebook mouse instead. While this may make for some difficulty while traveling, I don't inadvertantly select, click or move the cursor while keyboarding.
 

https://forums.techguy.org/threads/synaptics-touchpad-please-help.776242/
Relevancy 65.36%

I would like to mention that upgrading to Windows 10 on 2 HP laptops. On the one that is older which had the synaptics driver 15.3.29.0 the tapping worked fine, on the newer unit the driver was current with version 19. something. With attempting to adjust the synaptics using the up to date driver there was real no satisfaction. I deleted it and installed the 15.3.29.0 driver and it works great..

Hope this helps someone...

dsherman

http://www.tenforums.com/drivers-hardware/37059-synaptics-touchpad.html
Relevancy 65.36%

Hello,

Recently my Synaptics TouchPad suddenly stopped working on my Compaq M2000 laptop; I fixed the problem by re-installing the Synaptics driver. When I restarted the computer, the TouchPad was working fine, but the keyboard was not working at all, so now I cannot type in my password to log onto the computer.

Is there any way to solve this problem without having to format the computer?
 

A:Synaptics TouchPad

dont format. use a different comp, download (savepe) its a recovery program. you can run chkdsk from there. it will load its own drivers. savepe is a live xp cd.
 

https://forums.techguy.org/threads/synaptics-touchpad.566672/
Relevancy 65.36%

I upgraded to Windows 10 perfectly but after i installed Windows 10 driver of Synaptics TouchPad 19.0.19.1 PS/2 on my hp pavilion dm4-1265dx from official Synaptics webpage, everything works fine except one thing; Locking area on top left of the touchpad. Normally when you touch on it twice, the red led has to lid and touchpad should be locked, however now; the red light is always on and i cannot lock it with double touch.

http://www.tenforums.com/drivers-hardware/33013-synaptics-touchpad-red-led-always.html
Relevancy 65.36%

Hi. I'm having a problem with my HP Pavilion dv6000's touchpad. Recently (i.e. Today) it has been giving me an error and shutting down a program called "Synaptics Touchpad Enhancements", which has the adverse effects of slowing down the touchpad's sensitivity, and making the scroll bar on the side of the pad useless. Restarting solves this problem, but it occurs again after perhaps thirty minutes or so. I've already tried redownloading the drivers for it, but it hasn't solved the problem. In addition, upon selecting the mouse via the Control Panel, I'm confronted with this error.This problem has me stumped. Can anyone shed some light on what I could do to solve this?











Solved!
View Solution.

A:Synaptics Touchpad

Hi,The issue you have mentioned and the error you attached clearly state that there is an issue with the Synaptics Touchpad drivers on the system. To resolve the issue, I suggest you uninstall the Synaptics Touchpad drivers completely from the system through Control Panel, Add/Remote programs (Win XP) or Programs and Features (Win Vista). After complete uninstallation, please restart the system. Download the latest drivers from the following weblink and then install the software. This will definitely resolve the issue.http://www.synaptics.com/support/driversHope this information helps.Regards,Vidya

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Synaptics-Touchpad/td-p/95137
Relevancy 64.93%

Hello,

I just got an Acer Windows 8 PC, and none of the touchpad gestures seem to be working. I have tried using several recommended third-party tools and all of them said that I didn't have the correct drivers, even after I installed all of them.

I have gone to mouse --> Synaptics --> Settings, and the only options there are to enable/disable the buttons.

Is there any way to enable multi-touch?

Thanks,
Sora

A:Synaptics Touchpad Settings

Did you go to the Acer site and download the latest drivers for the touchpad? I have an Acer that came with Windows 7, upgraded it to 8 and downloaded the touchpad drivers from the Acer site. I now have the touchpad gestures. And it really really makes a huge difference!

http://www.eightforums.com/drivers-hardware/17756-synaptics-touchpad-settings.html
Relevancy 64.93%

Hi Guys, My touch pad isn't working on my aspire E1-572P laptop. Windows 8.1 64. I have deleted and re-installed the driver several times, still won't work, although the icon lights up when I press right or left button but nothing on the touch pad

A:Synaptics touchpad problems

The Synaptics touch pad gestures are not working on my Aspire E1-572P, although I have tried loading updated drivers from both Acer and Synaptics. The problem may have started since I had a touch screen replacement done by Acer about 2 months ago. The touch pad works fine as a mouse pointer. I had an on line chat with an acer tech. but he suggested doing a factory reset, which I thought was a bit extreme so I thought I might try here first. Would be grateful for any help. Thanks

http://community.acer.com/t5/Legacy-Laptops-and-Netbooks/Synaptics-touchpad-problems/td-p/345516/jump-to/first-unread-message
Relevancy 64.93%

Hello this is a strange problem I am having I used to have xp on my amilo laptop with synaptics driver May driver The nice thing about this was that the touchpad was disabled when an external mouse was plugged in just by ticking the proper box in the driver setting panel disable touchpad when external Easy and working fine also the touchpad was reenabled automatically removing the external mouse Now I switched to win and I lost this capability Fujitsu site does not have an updated driver and recommends to use the manufacturer drivers Fine but the latest version for Win Vista bit is C Touchpad synaptics problem it Touchpad synaptics problem works OK but there is no trace of that box disable touchpad when external you can only disable the touchpad and reenable manually in desperation I took the old driver used in xp run the setup in compatibility mode and it installed barring the usual complaints about incompatibility again it works fine but no trace of that capability Is something in win preventing this feature from working Or is some mix of amilo hardware and win causing the problem Thanks for any suggestion Roberto Milan Italy nbsp

Relevancy 64.93%

i am currently having touchpad and mouse problems.i used my wireless mouse once and my trachpad stopped working compltetely.i have seen that this is a common problem but ive tried everything and nothing works. a hard reset worked once to get my mouse pad working again without the wirelss mouse but when i needed to click it was doing nothing. i have tried another hard reset but the mouse pad still didnt work. the mouse only appears when i plug in the wireless mouse in. when i go into settings there is not synaptics, so i downloaded synaptics for my laptop and it said "could not find OS specific program." so i unistalled the previous version, downloaded the version for my laptop but still said the same thing even though it was the version for my laptop.Any idea's????

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/synaptics-touchpad-problems/td-p/5596954
Relevancy 64.93%

Hello,
My problem is that after switching off the touchpad mouse some time ago, now I cannot switsh it on. Usually I use a normal mouse, as it is more convienient. But when I am out of home I surely would like to use the touchpad one.
When I try to habilitate it in the contral panel, it works for several seconds only. I tryed it with and without the normal mouse - no differrence.
My computor is Acer Aspire 5610, Windows XP. Never had viruses.
I have tried to download a new driver from the link I have found in this post:
http://www.aqua-soft.org/board/showthread.php?t=43310
and put it on the existing one - no result.
Maybe I should delete the old version driver and then put the new one?
In advance thank everyone for help.
Irina
 

https://forums.techguy.org/threads/synaptics-touchpad-v6-2-does-not-work.572182/
Relevancy 64.93%

my synaptics touchpad has a mind of its own Hello this is my first posting to your Windows my has of its touchpad own mind synaptics a seven forum I am writing to you today because over the past two to three weeks my Synaptics touchpad mouse has had a mind of its own It has been clicking and opening files without me pressing the mouse buttons or tapping the touchpad scrolling by itself highlighting my synaptics touchpad has a mind of its own and moving the files on my my synaptics touchpad has a mind of its own desktop and in my computer etc I have tried everything from physically cleaning the Touchpad thoroughly updating the Synaptics driver time and time again my synaptics touchpad has a mind of its own only to find no resolution to this issue I have also uninstalled and reinstalled previous versions of the synaptics drivers that worked before with my laptop only to be confronted with this same problem I have ran scans on both Uni-blue registry booster and PC Tools Spyware Doctor which I use as my registry and anti-virus spyware programs and of which I update on a daily weekly basis and yet I have found no traces of what may be causing my mouse to act so crazy I have also ran the system scan in the command prompt which was suggested earlier in this thread only to find out that everything was running properly and at integrity I have an HP dv - dx Entertainment Notebook pavilion dv is the product name on the back that I purchased from Best buy in I am running Windows Home Premium -bit that was pre-installed onto my laptop I have been pretty thorough on keeping all of my Microsoft and HP drivers up to date and have only began to experience this problem with my touchpad earlier this month As far as the programs that I use on a daily basis I mostly use Mozilla Firefox as a web browser and Microsoft Word for my schoolwork and the GOM media player for watching videos None of which I have been able to do properly since this issue established itself onto my computer If anyone has any information on how I can resolve this sporadic mouse Synaptics Touchpad behavior please let me know as I am in desperate need to find a solution to this problem Thank you for your time and consideration - Lion

A:my synaptics touchpad has a mind of its own

Hello Lionpride. Welcome to the Forum.

Try this:
In the Taskbar near the clock you will see the icon for "Synaptics Pointing Device". Right click on that and uncheck: "Tap to Click".

See if that helps.

http://www.sevenforums.com/hardware-devices/210690-my-synaptics-touchpad-has-mind-its-own.html
Relevancy 64.93%

I recently purchased a laptop. If i use the touchpad for a while or in certain places (the common room of my college sometimes) the touchpad begins acting wierd. When i drap the pointer along and lif my finger up, sometimes it moves back to it original position or somewhere near, s its difficult to select things.
Any help or ideas apreciated

Thanks,
Metaphoric
 

https://forums.techguy.org/threads/synaptics-touchpad-acting-up.179060/
Relevancy 64.93%

After upgrading to Windows 10 from Windows 7 the Synaptics PS/2 touchpad no longer has scolling ability. I have tried vertical and horizontal, as well as 1 and 2 finger. The touch pad is enabled and scolling is enabled. The current driver is 19.0.12.98 which was updated by windows update. I have downloaded and installed 19.0.19.1 from the Synaptics website and it didn't work. I have tried the Windows 8 driver from Synaptics as well and had no luck (failed to install even in compatibility mode). The original Compaq Windows 7 driver wouldn't work either. Unable to find any solution by searching or reading the forums. Any help is appreciated.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Synaptics-Touchpad-No-Scrolling/td-p/5641465
Relevancy 64.93%

Does anybody have a tip where I can find free Synaptics Touchpad Drive downloads. I have 7.0 and overnight it froze on me.

I have only recently bought my laptop and it came with Vista which I have been hating and now this latest problem occured.

Thanks.

A:Synaptics Touchpad drive

Hi Zsofia,

Uninstall the driver and then go to windows update. It will detect your touchpad and install the correct driver software. You should be able to use your touchpad even without the synaptics driver as Vista has native drivers for your touchpad.

Good Luck!
Snarks

http://www.vistax64.com/drivers/206279-synaptics-touchpad-drive.html
Relevancy 64.93%

OK here is the problem,
I was using the touch-pad as always and it was working just fine all morning
than I put my system in standby when i returned my touch-pad was not responding. When I checked the driver properties under device status it read:
device could not start (code 10).
I rolled the driver back and nothing then I tried to uninstall/reinstall the driver from a download I got from the gateway website still nothing finally I tried a simple system restore (not a complete restore w/disk just restored back to sometime yesterday) still nothing even though it was working fine in the time frame i had restored back too.

if Anyone has any ideas let me know, I would greatly appreciate the help.
 

Relevancy 64.93%

My HP notebook was Windows 10 and was downgraded to Windows 7.   My touchpad is too touchy and I continuously find that it moves around the screen while i am typing.  I thought that I would just disable it.  It shows up on the hardware as a mouse PS2 and it does not have a disable button.  I just deleted the install file but it constantly re-loads on a re-boot.  I love my HP notebook, but the touchpad is driving me crazy, please help me.  

A:i have a synaptics touchpad under Windows 7.

Hi: Use the W10 touchpad driver from your notebook's support page. It also has the drivers for W8.1 and W7. That would be the only suggestion I can offer.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/i-have-a-synaptics-touchpad-under-Windows-7/td-p/5792439
Relevancy 64.93%

Hi all,

I tried to install a wireless mouse for my laptop, which I could't get to work(!). No problem, except that when I returned to using my normal Synaptics Touchpad it had lost it's Virtual Scrolling capability. Also, its touch-sensitive areas no longer work.

Furthermore, Synaptics Touchpad seems to have (semi-)disappeared from my computer ("semi" in the sense that the touchpad itself still performs basic functions like moving and highlighting.)

Also, I can no longer find Synaptics in my tray.

I can't find the Touchpad anywhere in Control Panel to get at the settings.

IIRC, there used to be a Synaptics properties window somewhere that allowed you adjust all this stuff - again, I can't seem to find this anywhere.

(My computer: Dell Inspiron 5100, Windows XP, no other problems with computer.)

Many thanks for any help you can offer.
 

Relevancy 64.93%

I am running an Acer 1350 laptop with a Synaptics touchpad V5.4. Under 'Device settings' it refers to Version 7.2.0 from 15Nov 02.If I go to Acer site this the version Acer still offers for my machine. I am finding that my touchpad works fine for maybe 30 minutes from startup but then stops dragging the screen when I move my finger on the pad until I lift my finger.It then move a distance in proportion to how far I have move my finger. As anyone experienced this and found a reason/way of correcting??
 

https://forums.techguy.org/threads/synaptics-touchpad-misbehaving.662935/
Relevancy 64.93%

So I've upgraded to windows 7 64-bit and now I'm having trouble even installing a Synaptics driver. No matter what version I use (I've been all over the internet, including Gateway's site) the install always fails, most often with this screen.

I know this is a tough one, but I'd appreciate your help.

A:More Synaptics Touchpad Woes

Have you tried loading it in Vista Compatibility mode?

http://www.sevenforums.com/hardware-devices/100542-more-synaptics-touchpad-woes.html
Relevancy 64.93%

Hello! My laptop has an issue about its mousepad. It was working fine last year before I double-tapped the upper left part of my mousepad (to disable it for a bit). I forgot to enable it again, and I turned my laptop off. Until then, it does not work anymore. I tried to follow the instructions that I read from different forums, but nothing happened. I already uninstalled it, then reinstall it again, but it is still not working. Can anyone help me? My laptop is a Pavilion g4-2220tx, bought it last March 5, 2013. I'll send some details of my driver. Anyway, the driver Synaptics PS/2 Touchpad is not found unless I turn 'Show hidden drivers' on to make the driver appear. Thank you to anyone who's willing to help me!  

A:Synaptics PS/2 Touchpad Code 24

Hi, Try the following. First of all,download the Chipset driver on the link below and save it to your Downloads folder. http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59647.exe When done, open Device Manager, right click the Synaptics device and select Uninstall. When this has completed, open your Downloads folder, right click the chipset installaer and select 'Run as Administrator' to start the installation. When this has completed, shutdown the notebook and then disconnect any peripherals ( ie usb mouse etc ). Unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter. Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter. Let windows fully load and see if you have basic touchpad functionality - if you do, download and install the Synaptics driver below. http://ftp.hp.com/pub/softpaq/sp61501-62000/sp61882.exe When this installation has completed, restart the notebook again. Regards, DP-K

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Synaptics-PS-2-Touchpad-Code-24/td-p/5605336
Relevancy 64.93%

Hello Everyone nbsp I do not usually G2 touchpad a HP synaptics now mess 455 is use forums and other HP 455 G2 synaptics touchpad is a mess now kinds of helps but guys this is hilarious Or it would be hilarious if happened to another person yeah nbsp basic data --Probook G Windows -bit McAfee IS nbsp So my Synaptics touchpad started behaving in an odd way yesterday That is it works fine at startup but the tapping surface stops reacting after a few seconds - sometimes HP 455 G2 synaptics touchpad is a mess now after a few minutes What remains is even more strange the two buttons remain operational and the bottom approx of the surface reacts to right and left movements while the upper zooms in and out whatever is on the screen WHOA And sometimes it goes back working for no obvious reasons Before stopping again Next If I close the lid and open after a few sec the wake-up process starts and the touchpad works fine until go to And it is not over the tapping surface works fine IF I KEEP ONE OR BOTH BUTTONS PRESSED - naturally this is not a solution as all side effects of a pressed mouse button occur But the pointer moves yeah Umm UPDATE this later phenomenon was a seemingly software-related sticky Ctrl issue that stopped occurring nbsp What I did this far Driver check driver uninstall - gt reboot - gt reinstall no newer version offered so the same - gt reboot - gt no effect same symptoms Windows System Restore to a mere days earlier stage everything worked fine but then McAfee vulnerability scanner reinstalled all the Windows Updates and now the situation is even worse than before I do not say some of the latest KBs cause this anomaly for sure but well is there a chance Any help welcome Thanks amp cheers AB

A:HP 455 G2 synaptics touchpad is a mess now

So bad noone is able to answer this question. :-(Update:- touchpad always starts ok when ProBook is switched on, but halts after an indeterminable (that is always changing) time;- I am unable to determine the trigger - I do not know what (later starting background process and/or clash of processes??) causes this behaviour;- when operable it is like trying to drive a waterbed in the Monaco Grand Prix - lags and slides;- when stops the bottom 10% of the touchpad reflects to left/right impulses and the buttons work well;- quite often is starts again if I move a plug-in mouse and switch back to touchpad after a minute or so - but NOT always;- had a "sticky Ctrl" issue earlier (had loads of fun...)- this is NOT the same;- if the touchpad is stuck with no signs of life I switch off Synaptics processes from Task Manager - I gain a very strange touchpad without the extras of Synaptics and Shaking Like Hell. WOA? but it works for people with lots of patience.I think this is a challenging issue, so dear Hardcore Hardware Magicians - HELP ME!Cheers!

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-455-G2-synaptics-touchpad-is-a-mess-now/td-p/5255996
Relevancy 64.93%

i have iball wonder (which has both touchpad & keyboard), i want my touchpad to perform different functions with fingers.
so can i use this synaptics for this touchpad to perfom different functions or else suggest me some software names which can do multiple functions by gathering finger movements on touchpad.

plse suggest some software names to configure touchpad
 

https://forums.techguy.org/threads/can-i-use-different-touchpad-device-for-synaptics.995305/
Relevancy 64.93%

Just Installed (clean install) Windows 7 64 bit on my laptop today, what a pain, tried an update first on my 32 bit but had problems so I decided to go ahead with installin 64 bit as my computer was compatible.

Anyway, got it installed and I'm re-installing my software.

Main problem is I can't seem to get a driver for my touchpad on my laptop which is a Fujitsu Siemens just over a year old. Fujitsu do not have 64 bit drivers but I got one from Synaptics.com which is supposed to be compatible and signed but when I try to run it I get the error message that it is not a Win32 app.

Anyone got an answer for me.

A:Synaptics Touchpad Driver

OK. Managed to find a driver which seems to work.

http://www.bleepingcomputer.com/forums/t/266218/synaptics-touchpad-driver/
Relevancy 64.93%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Starter, 32 bit
Processor: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, x64 Family 6 Model 28 Stepping 10
Processor Count: 2
RAM: 1013 Mb
Graphics Card: Intel(R) Graphics Media Accelerator 3150, 256 Mb
Hard Drives: C: Total - 139212 MB, Free - 113661 MB;
Motherboard: Acer, JE02_PT
Antivirus: AVG AntiVirus Free Edition 2013, Updated and Enabled

Hi
I just did a system restore to "factory settings". Now, my touchpad is erratic and too sensitive. When I go to the Control Panel and click on "Mouse" (as all the advice suggests), I cannot find anything pertaining to the touchpad. I don't know if I need a driver or what. Any help would be greatly appreciated - preferrably before I throw this thing across the room!
Thanks,
Kem
 

A:synaptics touchpad sensitivity

yes you prolly need the synaptics manager driver? What brand PC do u have? if its a dell or HP please post your Dell 7-character Service Tag or your HP Product Number so we can better assist you
 

https://forums.techguy.org/threads/synaptics-touchpad-sensitivity.1099163/
Relevancy 64.93%

Dear Team, I have recently upgraded the drivers for Synaptics touchpad on my HP laptop (HP Pavilion G4-2049Tx).Everytime I reboot my machine, or "Log On" Synaptics touchpad gestures doesn't seem to work ever since the drivers upgrade. In order that the gestures start working; I have to manually launch any Synaptics related process after log on.To my surprise; Synaptics is already a part of StartUp processes in my Windows OS still it doesn't get triggered at the time of boot. On the top of that; as always I have been facing overheating issues at the time of charging my laptop since quite a long.It becomes impossible to rest the "laptop" on ones "lap" while its getting charged. Kindly help me solve these issues. Thanks in advance!Cheers,Ameya

A:Issue with Synaptics touchpad

Hello Ameya,  can can you do a bios update and bios default on the unit and check once  #hpexpertday




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Issue-with-Synaptics-touchpad/td-p/5627715
Relevancy 64.93%

For some reason, the Synaptics Touchpad control panel's settings do not save in Windows 10.

A:Synaptics Touchpad vs. Windows 10

Please try the following steps to resolve the issue.1. Click the Start orb, type msconfig in the Start Search box and hit Enter. If you are prompted for an administrator password or confirmation, type your password or click Continue.2. Within the System Configuration dialogue box, click the Startup tab.3. Look for any entries named KHALMNPR or similar, and uncheck the box next to them (there may only be one).4. Click OK and restart your computer.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Synaptics-Touchpad-vs-Windows-10/td-p/5184344
Relevancy 64.07%

So I was updating my drivers, and had wanted to update my Synaptics driver. I had removed the older version of Synaptics driver (because I was required to) and wanted to restart. My computer restarts, and I try to install the latest version of the Synaptics driver, it doesn't work. It says "install failed." I have tried multiple times.

Any help would be appreciated!

Relevancy 64.07%

I did a clean install of win7 (yeah for me!) on my acer aspire 5336-2524. I also downloaded the device driver for Synaptics PS/2 Port Compatible TouchPad, unzipped it, and I think I installed it? I did an auto search for the best driver and result was the best driver was installed.

My problem is this, there used to a function within Personalize > Change Mouse Pointers > then touch pad. Here is where I could stop the function of the scroll bar along the right side of the touch pad and make scroll work with two fingers.

I don't know if that function was part of acer or Synaptics PS/2 Port Compatible TouchPad. But I want it back!

also there is nothing of the original factory install because when I made all the restore and back up it was crap, I found out after I needed it.

Mike W

A:Synaptics PS/2 Port Compatible TouchPad

mawil1013, look here

synaptics

Number 5

http://www.sevenforums.com/drivers/288965-synaptics-ps-2-port-compatible-touchpad.html
Relevancy 64.07%

As from object, I need the touchpad for notebook HP ENVY PROTECT SMART, MODEL 15-K112NL, S.N. [Personal Information Removed]
P.N. K1Y78EZ, AVAILABILITY AND PRICE.
 
 

A:Touchpad Synaptics TM2960 920-002748-02

Hi @rhmultimedia, Welcome to the HP Forum! Thank you for becoming a HP Forum member. It is a dynamite location to get help from the community, get suggestions and find what has worked for others. For you have the best experience, here is a link for you to review, should you have any concerns: First Time Here? Learn How to Post and More. I understand that you need a replacement touchpad for your ENVY Notebook - 15-k112nl. Here is a link to the HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC HP ENVY m7 Notebook PC Maintenance and Service Guide. Please note chapter 3, page 20,item 5 for the replacement part numbers. Here is a link to the HP Parts Store. When I checked in the US with the part number they have one in stock.  Should you be in a different region, you will need to select the correct one and redo the search. If it should not be available in your area, you can try a web search with the part number. Please let me know if this resolves the issue by marking this post as "Accept as Solution".  To simply say thanks, click the ?Thumbs Up? below!    If you require further assistance let me know and I will gladly do all I can to help.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Touchpad-Synaptics-TM2960-920-002748-02/td-p/5695515
Relevancy 64.07%

Tengo una Toshiba Satellite A210-11T (PSAEGE). Cansado de Windows Vista instal? desde cero Windows 7 y qued? maravillado. Tuve algunos peque?os problemas de drivers/compatibilidad que pude solucionar, pero hay dos que aun no logro encontrarles la soluci?n.

El primero es el Synaptics TouchPad (mouse de la laptop) que no me funciona. Al no encontrar drivers para windows 7 de este modelo de Toshiba baj? para Windows Vista pero no tuve suerte, tampoco bajando de la p?gina de Synaptics.

Lo otro es que no me funciona la tecla de FN del teclado. Bah, la tecla me funciona porque se prende una lucecita, pero no hace nada al combinarla con las funciones de arriba (por ejemplo silenciar, aumentar o disminuir brillo, etc.)

Agradecer?a si alguien pudiera orientarme a solucionar estos dos inconvenientes.

A:Drivers de Synaptics TouchPad en Windows 7

Since I am fluent in Spanish went to the Google Translate page, this may be helpful:






Quote:
I have a Toshiba Satellite A210-11T (PSAEGE). Tired of Windows Vista installed from scratch Windows 7 and I was amazed. I had some small problems of drivers / support that could solve, but two of them still can not get the solution.

The first is the Synaptics TouchPad (mouse on the laptop) that does not work. With no drivers for Windows 7 went down this Toshiba model for Windows Vista but no luck, not down from the Synaptics website.

The other thing is that it does not work the FN key on the keyboard. Bah, the key work for me because a light comes on, but does nothing when combined with the above functions (eg mute, increase or decrease brightness, etc.).

I will appreciate if someone could guide me to solve these two problems.


I'll have a look.

http://www.sevenforums.com/drivers/110902-drivers-de-synaptics-touchpad-en-windows-7-a.html
Relevancy 64.07%

Windows 7 laptop (Lenovo) 64 bit.

I want to stop all the extra features of the Synaptics touchpad on my computer but still be able to use the pad as mute. I mean, I don't want the pointer to grab onto objects and open links or do anything unless I click on that object. I don't like all these new features and don't know how to stop the pointer from opening links. It also opens and closes apps. I went into the mouse properties and disabled all the features but the mouse still has a mind of its own. Is there any alternatives? I don't want to only use an external mouse as I often use the laptop sitting on a couch and a mouse is not convenient.

Synaptics Touchpad V7.2 on PS2.Port.

http://www.sevenforums.com/hardware-devices/386064-how-disable-synaptics-features-but-still-have-touchpad.html
Relevancy 64.07%

In Windows 7 I downloaded the latest driver from Synaptics and it gave me the option to disable the touchpad. However nothing I do has allowed me to do the same thing in Windows 8. I never get the touchpad icon in the system tray. When I go to the Mouse device in device manager it shows the touchpad as another device but the "disable" button is grayed out.

I am using an Acer Aspire notebook.

A:Can't disable Synaptics touchpad anymore

I also can not disable touchpad on ASUS G73SW. Makes typing difficult. I've tried to disable it with and without synaptics drivers installed. May just have to cludge out my touchpad with duct tape

http://www.eightforums.com/general-support/7327-cant-disable-synaptics-touchpad-anymore.html
Relevancy 64.07%

Hey,

I have an Asus z63 notebook and am having troubles speeding up the cursor for the Synaptics touchpad. When I go into control pannel and go to the mouse motion settings, the curson speed is set to the slowest position. When I try to increase the speed, it automatically resets itself to the slowest speed. I really cant figure out how to get it faster. With my cordless mouse enabled, I can change the cursor speed no problem. However, the touchpad speed always goes back to the slowest position.

Any ideas on how to fix this?
 

https://forums.techguy.org/threads/synaptics-touchpad-cursor-slow.538826/
Relevancy 64.07%

I recently upgraded from a Probook s to a newer G with both running Win Pro bit The Probook issues G3 HP Synaptics/touchpad 450 touchpad for my older Probook started a bit wonky but I eventually found a driver that made it right I'm struggling with the new G and feel it's a driver issue rather than a touchpad issue although I could HP Probook 450 G3 Synaptics/touchpad issues be mistaken HP Probook 450 G3 Synaptics/touchpad issues I've searched HP and Synaptics websites for assistance with no success Maybe someone here can assist Here are the issues I'm experiencing on a continual basis Touchpad quot accuracy quot seems really poor -missed taps on pad and left click button -cursor jumps about screen -cursor doesnt always move with finger swipe -sometimes right click menu pops up when swiping with finger absolutely not hitting right click button Cursor scroll image freezes on screen most annoying thing -When two finger scrolling the cursor image will freeze a phantom image onto the screen It only happens on scrolling function with the scrolling cursor image When you hover over the frozen image it shows the circular busy cursor image Sometimes there will be or more frozen images on screen which overlay almost any program you open I can clear them by ending the SynTPEnh exe process in task manager which seems to start itself back up immediately I really like the two finger scrolling and would hate to have to resort to other methods Adding Edit- When images freeze on screen I still have functionality of the cursor It's just that I have these cursor scroll box images overlaying whatever I'm doing which gets annoying I'm currently running the latest Synaptics driver and have also tried to rollback the driver Neither of which helps I've run the diagnostics on the touchpad and did not have any of the functionality issues Same when using the touchpad in safe mode I've tried disabling a variety of Synaptics functions and programs with no success Anybody experience the same or have a solution

http://www.sevenforums.com/drivers/397115-hp-probook-450-g3-synaptics-touchpad-issues.html
Relevancy 64.07%

Am using windows 8 pro with the synaptics drivers on my sony vaio, but they are taking ages to load in whenever I reboot/startup my laptop.

I was wandering if there are any tweaks I can do to make it load into my system tray quicker. I dont have many things loading at startup so I cant see what the problem is.

I would like it to load in first rather than last.

Thanks.

A:Synaptics touchpad drivers at startup

Try uninstalling Scrybe add-on( from Programs in Control Panel) and see whether it helps.

http://www.eightforums.com/drivers-hardware/17688-synaptics-touchpad-drivers-startup.html
Relevancy 64.07%

Yesterday I installed vista on my laptop which previous ran XP.
In XP I had an icon in my tool bar, as well as an icon in the control panel where I could disable my touchpad.However since moving Vista, it no longer shows up, so I cant turn the damn thing off. Ive been into system devices, and all that shows up is the mouse, it doesnt even recognise I have a touchpad device, nor does it show up in the bios before loading windows, so I cant disable it. anywhere.
How can I turn this damn thing off? I hate it. Ive tried downloading the drivers for it to see if that brings it up, but after installing them there was no change.
Any ideas?

http://www.techsupportforum.com/forums/f217/solved-synaptics-touchpad-cant-turn-off-425748.html
Relevancy 64.07%

There have been many answers to this question before but none of them works for me nbsp Maybe the Anniversary Update for W messed that up as well as everything else nbsp I can disable the touchpad through Control Panel but it is enabled the next time I reboot nbsp I have edited the registry to change that behavior but it doesn't make any difference nbsp I looked at the latest drivers from Synaptics but those installed on my computer are newer than those on the Synaptics website - odd nbsp The touchpad is a complete and total poc nbsp I have a stay disabled Touchpad will Synaptics not wireless mouse attached Synaptics Touchpad will not stay disabled and with the touchpad enabled and the computer closed I have an external monitor the cursor dances a wild fandango across my screen opening applications selecting text and so on nbsp Not acceptable nbsp What I would really like to do is disable touchpad when a mouse is connected but that option apparently disappeared with W nbsp Can anyone give me a recommendation for how to solve this problem Thanks John

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Synaptics-Touchpad-will-not-stay-disabled/td-p/5779650
Relevancy 64.07%

I just upgraded to Windows 10 and have discovered a problem that I can't seem to fix. When I Right-click on my Touchpad, nothing happens. This was very useful when I need to fix a word spelling & get options for the misspelled word.

I have an HP Pavilion using Synaptics Touchpad.

Any ideas ???

A:Right Click does't work on Touchpad (Synaptics)

Hi, do you mean the touch pad button (I presume you have one) or the double tap right click option?
And can you confirm the obvious, that rt click with a mouse works?

http://www.tenforums.com/drivers-hardware/24625-right-click-doest-work-touchpad-synaptics.html
Relevancy 64.07%

I have a Dell Studio 1558, running Windows 7. I use the latest Firefox browser.
The Synaptics Touchpad control panel became unusable, so I deleted the driver, and tried to reinstall it.
Unfortunately the install fails after a short time. I tried to follow the instructions as supplied by Triple6 last time this happened, but that failed too!!
Can anyone help please..
Phil..

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3956 Mb
Graphics Card: ATI Mobility Radeon HD 5470, 1024 Mb
Hard Drives: C: Total - 461899 MB, Free - 253738 MB;
Motherboard: Dell Inc., 0874P6
Antivirus: AVG AntiVirus Free Edition 2014, Updated and Enabled
 

Relevancy 64.07%

I have v18.x.x.x and it allows me to disable the touchpad when a mouse dongle is plugged in. But, if you look on HP or Synaptics, the v17 is the download as of 1/16/16. Where can we get the "REAL" drivers from? The synaptics site is very vague about what is in the zip file. They have a new CEO - maybe he will help get things worked out. Meanwhile, I'm looking for the v18 drivers and see that you have v19? Where are these drivers available?

A:Synaptics Touchpad Freezes after Lid Close

Hello gocoats1,

Your post/thread has been moved to the following forum for better exposure: Notebook Video, Display and Touch

You can find your post/thread again by using the following URL: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Synaptics-Touchpad-Freezes-after-Lid-C...

If you have any questions please feel free to send me a private message.

Thank you and have a great day!

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Synaptics-Touchpad-Freezes-after-Lid-Close/td-p/5452230
Relevancy 64.07%

Okay, on my laptop, the process SynTPEnh.exe governs the touchpad. For some reason, after my laptop has been on for a while, the process quits. If i restart the process, it usually closes again within 15 seconds of the process being restarted. Does anybody have any insight about what causes this and how it can be stopped?

Also, after i restart the computer, SynTPEnh.exe stays on for a while and the cycle i described previously continues.
 

A:Synaptics Touchpad Driver Closing

Go to the PC manufactures site..download the latest driver..often times a new driver comes out to fix bugs etc.

Uninstall the driver through "programs" in the control panel...do not use device mgr

Reboot..install the driver you downloaded and saved...install and reboot.
 

https://forums.techguy.org/threads/synaptics-touchpad-driver-closing.937750/
Relevancy 64.07%

I have a Lenovo Ideapad Y P with Windows For months or longer I have TouchPad Driver Cannot Synaptics Re-install been having an issue with the touchpad software After days of use it will stop responding to advanced commands like two finger scrolling unless I restart the computer If I try to access the icon in the right corner on the taskbar the application will not open It cannot be right clicked If I try too much the taskbar freezes I tried to access Mouse in control pad - no response I couldn t access it I tried to look for updates for the driver and it would always say it is totally updated or when I manually download one it would say that it is already installed or something So today I decided I would fix this problem Cannot Re-install Synaptics TouchPad Driver I uninstalled the application and removed the driver in the Drivers section in control panel I downloaded the program again from the Synaptics site for my computer and tried to install The message quot A previous version of the Synaptics TouchPad Driver is installed If you continue installation the driver may not install properly To avoid this problem press No to exit setup I never pressed no the multiple times I tried to install and install would always fail after about seconds I then looked for traces of Synaptics on my computer in Program Files and Driver folder Deleted all Synaptics folders and emptied recycling bin Problem still persists Need help I rebooted my computer a couple times along the way but not after I deleted those folders Help would be much appreciated as I can t easily use a mouse to study in class nbsp

A:Cannot Re-install Synaptics TouchPad Driver

It could be a physically bad touchpad...

Does the installer have an option for "clean install"?
 

https://forums.techguy.org/threads/cannot-re-install-synaptics-touchpad-driver.1163969/
Relevancy 64.07%

Hi There I have a synaptics touchpad driver installed on my laptop it is listed in my mouse options under devices settings as quot Synaptics Pointing Device - v quot and under devices in the same tab the name keeps driver touchpad breaking Synaptics is listed as quot Synaptics touchpad v quot The problem I am having is that in the devices settings tab I have checked the box that says quot Disable internal pointing device when external USB pointing devices is attached quot because frequently the mouse cursor will jump around the screen when typing and mess up what I am doing Problem is that when I want to use the touchpad and unplug the mouse the touchpad will work fine until I shut Synaptics touchpad driver keeps breaking down the computer On startup whether clean boot or restoring from standby the touchpad will no longer work with or without a mouse connected When this happens I have tried a fresh reboot of the laptop but the problem remains I have tried reconnecting my mouse before shutting down or closing the lid of my laptop but the problem persists Some times when using the touchpad the power cord on my laptop unplugs and when I plug it back in the touchpad no longer works yet when I unplug the cord it will work again I don't get any error messages when any of these things happen they just happen without warning When I go into my mouse settings and go to the device settings tab the devices list is now empty and all other options are greyed out including the check box to disable the touchpad when a mouse is connected It's like the touchpad is not even installed anymore The only way to fix it is to completely uninstall and reinstall the synaptics driver which is easy to do but still very frustrating that I have to do it Any suggestions on how to fix this issue so that I can still have my touchpad disabled while an external mouse is connected and so that when I do need to use my touchpad I won't have to uninstall and then reinstall my drivers when I am done This problem has been bugging me for some time and I have just had to live with it but I do not believe this is a normal issue I am running windows home premium Any help is appreciated Thanks

A:Synaptics touchpad driver keeps breaking

Quote:
because frequently the mouse cursor will jump around the screen when typing and mess up what I am doing


That's a fairly common issue and my wife and daughter solved it by getting Toshiba Notebooks that have a switch between the touchpad and the keyboard to turn the touchpad off, both use a external mouse. The problem stems from the sensitivity of the touchpad and where a person's thumbs want to rest while typing. Adding to the problem is the type of touchpad that has the vertical and horizontal scroll areas.

I'd go into Device Manager and uninstall both instances for the touchpad and reboot, should install the drivers again, handy when an installation gets corrupted.

http://www.sevenforums.com/drivers/334947-synaptics-touchpad-driver-keeps-breaking.html
Relevancy 64.07%

I am trying to change the setting so that I can use my left hand as the primary hand. As soon as I click that option, my Ws 7 computer locks up. Everything is useless- including Task Manager. I can activate it, but it does not respond to commands.

As best I can determine, only trying to change the "hand" locks up the computer.

{redoak}
 

A:Synaptics Touchpad problem- locks up Ws7

BUMP
I have found no info elsewhere, so I am depending on folks here at TSG to come to my aid.

Thanks, {redoak}
 

https://forums.techguy.org/threads/synaptics-touchpad-problem-locks-up-ws7.968167/
Relevancy 64.07%

Fixed! See Below Post
Laptop: Sony VGN-SR190E
OS: Windows 7 (64 Bit) (upgrade from Vista)
Problem: Synaptics Pointing Device (driver) - Gone

My touchpad is way too sensitive and driving me crazy. In Vista, there was a Synaptics Pointing Device utility that would enable adjustments to the touchpad.

In the Sony drivers section (Windows 7, 64 bit) for my laptop the Synaptics driver is no longer there. The Sony Forum is giving me no help/reply to this question.

Anyone here have any ideas of where I could get a suitable driver or another method of adjusting the touchpad?

I Appreciate any help,

Phil

A:Synaptics Touchpad Missing for VAIO

Try updating your drivers from here:

Sony eSupport - Computers & Peripherals - Select Your Model
http://www.vaio-link.com/os/vista/64bit/
ftp://ftp.vaio-link.com/PUB/VAIO/WIN7UPGRADE/

http://www.sevenforums.com/hardware-devices/137061-synaptics-touchpad-missing-vaio.html
Relevancy 64.07%

Dear Support Team nbsp For a couple of days the mouse on my HP EliteBook behaves erratically nbsp It starts right away at the start of Windows when the log-in screen with the different profiles appears I can neither click on any profile nor on Synaptics PS/2 TouchPad Port Malfunction the shut-down button However I can select a profile via the arrow-keys and the Synaptics PS/2 Port TouchPad Malfunction Enter button of my keyboard Once Windows has loaded the mouse acts Synaptics PS/2 Port TouchPad Malfunction normally nbsp However after a couple of minutes or sometimes hours the mouse starts to behave erratically again Either the left-click is activated repeatedly also turning the pointer into scroll mode or neither left-click nor right-click are reacting at all Funnily I discovered how to unfreeze the mouse in the latter case I simply need to start the Windows Task Manager via Ctrl Alt Del and the arrow-keys Once the Task Manager is open the mouse works normally again This does not apply to the former phenomenon though when the left-click is activated repeatedly nbsp I have consulted many forum entries and tried many remedies My BIOS is up to date and I also updated the mouse driver via the Device Manager This last attempt even made things worse Since Windows installed the driver Synaptics TouchPad V Synaptics Pointing Device - v Jun I cannot use the Tap and Drag function by holding the second click on the touchpad any more even though the option is activated in the aforementioned TouchPad Synaptics PS/2 Port TouchPad Malfunction V settings This applies to all times even when the mouse is not showing the erratic behaviour mentioned above nbsp So much in all details Please let me know what I can do nbsp Many thanks rhadamanth

http://h30434.www3.hp.com/t5/Business-Notebooks/Synaptics-PS-2-Port-TouchPad-Malfunction/td-p/5745587
Relevancy 64.07%

I recently upgraded from a Probook s to a newer G with both running Win Pro bit nbsp I'm struggling with the new G and feel it's a driver issue rather than a touchpad issue although I could be mistaken I've searched HP and Synaptics websites for assistance with no success Maybe someone here can assist Here are the issues I'm experiencing on a continual basis Touchpad accuracy seems really poor-missed taps on pad and left click button-cursor jumps about screen-cursor doesnt always move with finger swipe-sometimes right click issues Probook 450 G3 synaptics/touchpad menu pops up when swiping with finger absolutely not hitting right click button Cursor scroll image freezes on screen most annoying thing -When two finger scrolling the cursor image will freeze a phantom image onto the screen It only happens on scrolling function with the scrolling cursor image nbsp When images freeze on screen I still have functionality of the cursor nbsp It's just that I have these cursor scroll box images overlaying whatever I'm doing which gets annoying nbsp When you hover over the frozen image it shows the circular busy cursor image nbsp Sometimes there will be or more frozen images on screen which overlay almost any program you open I can clear them by ending the SynTPEnh exe process in task Probook 450 G3 synaptics/touchpad issues manager which starts itself back up immediately I really like the two finger scrolling and would hate to have to resort to other methods I'm currently running the latest Synaptics driver and have also tried to rollback the driver nbsp Also updated Bios to nbsp Nothing has helped I've run the diagnostics on the touchpad and did not have any of the functionality issues although you lose the synaptics enhancements Same when using the touchpad in safe mode I've tried disabling a variety of Synaptics functions with no Probook 450 G3 synaptics/touchpad issues success Anybody experience the same or have a solution

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Probook-450-G3-synaptics-touchpad-issues/td-p/5651290
Relevancy 64.07%

Hi, I have a HP WIN8/M6-1125DX. I recently uninstalled the Synaptics TouchPad on accident and have been unable to figure out how to get it back. I tried using a system restore point but it repeatedly says that there is an error in the restore.  Can I reinstall the touchpad software or find it on my computer somehow? Any help would be greatly appreciated, thank you!

A:Accidentally Uninstalled Synaptics TouchPad

Hi, You can download and reinstall the Synaptics software package from the following link. http://ftp.hp.com/pub/softpaq/sp61501-62000/sp61880.exe Regards, DP-K

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Accidentally-Uninstalled-Synaptics-TouchPad/td-p/2643991
Relevancy 64.07%

Touchpad just stopped working while I was using it Here s what s going on Fn F does nothing Synaptics ps Port Touchpad shows in Device manager however it is hidden and has a yellow Touchpad Driver Problem? Synaptics exclamation point Error code This device Synaptics Touchpad Driver Problem? is not present is not working properly or does not Synaptics Touchpad Driver Problem? have all its drivers installed Code I have updated the drivers from the Gateway website by first uninstalling the drivers that were present No go I then updated the drivers from the synaptics website via the same method nothing I ve tried searching for a driver via device manager nothing As I mentioned I tried Fn F and nothing happened Also I notice that the driver software is not loading in the tray like it used to and I can t even make it run by trying to open the exe file Any ideas I ve been searching for an answer for this for a while with no luck nbsp

Relevancy 64.07%

i just installed windows 8 pro 64 bit on my lenovo z580 and downloaded the synaptics touchpad driver for same operating system from the lenovo website. but when i install it in C:\drivers it says that-"you have to run the 64 bit version of DPinst.exe on this machine." PLEASE HELP, although my touchpad is working, the cursor is too slow and i cannot scroll with it.

A:windows 8 synaptics touchpad driver

You could try the "Vanilla" Synaptics drivers.

Drivers | Synaptics

http://www.techsupportforum.com/forums/f320/windows-8-synaptics-touchpad-driver-677771.html
Relevancy 64.07%

The touchpad on my HP G62 laptop was less responsive than normal. I tried changing the properties with no improvement. So I went to HP help and noticed that there was a driver update for this device. So I ran the update. Then the touchpad barely worked at all and a notice box said the driver was incompatible with current system. The advice on the web included more than one remark advising to not bother with the Synaptics website as it is unreliable. I did it anyway. Synaptics recognised I had a legal copy of Windows 7 Home and I downloaded the suggested driver. Which actually was a new version entirely. Now the pad is back to life just like old times. The HP update was outdated. Every time I have used any HP updates I run into problems. I suggest HP users forget all about the "Support Assistant" and seek more credible update sources. Thnx, gnuguy.

http://www.bleepingcomputer.com/forums/t/472972/synaptics-touchpad-and-hp-driver-updates/
Relevancy 64.07%

does anyone know where a SMBUS Controller driver for AMD is, and

a synaptic touchpad driver (i dont know my exact model, pc doesnt say)

I just took the all the time to get a 7 pc down to xp, and i would like to scroll with my touchpad again....

it still works though, but these would be nice to have.
 

Relevancy 64.07%

Hi All,

I just installed Windows 7 Build 7600 and I am trying to get the touchpad scrolling to work on my Dell Inspiron 1420. I installed the synaptics drivers from their website (v10.1.8 x64) but when I go to mouse properties and click the synaptics tab it only allows me to configure the right and left click buttons. How can I configure the scrolling of my touchpad? I NEED it!

Also are there any iTunes guru's out there? I have my library all setup on my vista partition. Is there anyway I can get my library/playlists on the Windows 7 side...I don't want 2 copies of my music, I want it to all link to the files on the vista partition but I have a feeling I will have trouble either getting the playlists in or trying to gain access to those files on that partition....

thanks for all your help!

A:Windows 7 - Dell Touchpad - Synaptics

  
Quote: Originally Posted by ace2525


Hi All,

I just installed Windows 7 Build 7600 and I am trying to get the touchpad scrolling to work on my Dell Inspiron 1420. I installed the synaptics drivers from their website (v10.1.8 x64) but when I go to mouse properties and click the synaptics tab it only allows me to configure the right and left click buttons. How can I configure the scrolling of my touchpad? I NEED it!

Also are there any iTunes guru's out there? I have my library all setup on my vista partition. Is there anyway I can get my library/playlists on the Windows 7 side...I don't want 2 copies of my music, I want it to all link to the files on the vista partition but I have a feeling I will have trouble either getting the playlists in or trying to gain access to those files on that partition....

thanks for all your help!


Ace

We could tell you more if you filled in your system specs in the lower left corner of your post, but Im assuming you dont have this tab. Im running a dell as well but IM using an older driver that was installed by win 7, and it works

In terms of Itunes I also dual boot and keep the music files on one partition (win 7) but as long as you point itunes to where they are stored, it should be a problem. the problem comes when you want to sync the updates (adds/deletes) on both partitions.
Ken

http://www.sevenforums.com/general-discussion/21214-windows-7-dell-touchpad-synaptics.html
Relevancy 64.07%

Hi, can somebody help me please..? I'm using HP Notebook F104TU on Windows 10. I also accidentally uninstall my Synaptic Touchpad. I've tried downloading the driver from Synaptic website but to no avail. Thanks in advance. 

A:Re: Accidentally Uninstalled Synaptics TouchPad

Hi @Mesyong, Welcome to HP Forums! I have read your post and wanted to help. I understand that you need the touchpad driver for  HP Notebook F104TU on Windows 10. You can download it from here:Synaptics TouchPad Driver: Version 19.0.12.101 Rev.C sp72846.exe Resource: http://support.hp.com/gb-en/drivers/selfservice/HP-11-f100-Notebook-PC-series/7690607/model/9788115 Let me know if it resolves your problem. If this helps you to reach a solution, please click the "Accept as Solution" button down below in this message. If you wish to say "thanks" for my effort to help, click the "thumbs up" to give me Kudos.  Regards, 

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Re-Accidentally-Uninstalled-Synaptics-TouchPad/td-p/5658508
Relevancy 64.07%

Hello everyone,

when I first upgraded to Windows 8, everything except the accelerometer was working perfectly. Now, weeks later all of a sudden my touchpad (synaptics) stopped working. I un- and reinstalled drivers, reset windows, reinstalled windows.. nothing worked. I checked in the driver settings, and it says it's working fine, but no input gets through.

Does anybody else experience similar issues? Or does anybody got an idea how I could solve this issue? My Acer Aspire 1825ptz might have a touchscreen as well, but using the desktop without a proper mouse is still a pain.
I uploaded my dxdiag, so you can have a look into my specs.

Thanks a lot for any ideas,

Cheers

A:Synaptics Touchpad/ Mouse disappeared

Try uninstalling touchpad driver in Device Manager, get the Acer Driver from here and re-install it.
Download
If that doesn't work, try the driver from Synaptics.
Drivers | Synaptics

http://www.eightforums.com/drivers-hardware/13449-synaptics-touchpad-mouse-disappeared.html
Relevancy 64.07%

So I wanna install it for my Vista Ultimate, but none of the editions will install properly. The version for XP installs properly but I cannot configure its settings ... The Vista version doesn't install completely. I really like the virtual scrolling feature, so is there an alternative?
I installed an earlier version (for XP) and it works, but I can't change the settings. I click the icon in the tray, click Device Settings tab, and click Settings under Devices. Normally a box should pop up but for me nothing at all happens.
 

Relevancy 64.07%

yea...my left click doesn't work...
and plz dont start saying stuff about drivers, 'cos i've already downloaded and reinstalled ALREADY... so my other functions work, like right-click, and scroll, but just not my left-click...so i have to use a really crappy USB mouse which makes it hard to use my Laptop portably...************************************************[bleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeep]what the [bleeeeeep]...i really hate my computer... its almost really slow as well... also, if you would like to see my system specs (if you don't already know how to) just click on my name
 

https://forums.techguy.org/threads/synaptics-touchpad-left-click.669006/
Relevancy 64.07%

I have an ASUS U series notebook and would like to have a tap zone for right click so I don't have to use the button.

However, under tap zones, I am not able to select an action from the list box.

Has this feature been disabled on my laptop due to the size of the touchpad? If so, is there any way around this so I can use tap zones?

http://www.techsupportforum.com/forums/f217/cant-enable-tap-zones-on-synaptics-touchpad-v7-4-a-650736.html
Relevancy 64.07%

Hi, I've just upgraded from Windows XP Home SP2 to Windows Vista Ultimate on my Toshiba Satellite a100. I was wondering where I could download a driver for Synaptics touchpad that works? I tried the generic drivers from Synaptics' website, but they do not install completely (the second component always fails to install). Then I tried the ones from Toshiba's website, but The Vista-compatible ones display an error that says error code "#5B4 @10". Then I tried The Windows XP-compatible drivers, and they work perfectly, except the fact that I cannot configure enhanced features such as virtual scrolling and tap zones.
I click on the icon in the tray, click on The Device Settings tab, and whenever I click on The Settings button nothing happens. Any help?

A:Synaptics touchpad driver for Vista 32 bit?

What model toshia A100 what?

http://www.techsupportforum.com/forums/f217/synaptics-touchpad-driver-for-vista-32-bit-166724.html
Relevancy 64.07%

I recently needed to adopt a new USB mouse for use with my dependable Toshiba P S Satellite I never use the touchpad I installed Intellipoint and was enjoying the mouse when I realized my keyboard no longer worked nor could I activate the touchpad I have Touchpad Synaptics PS/2 Port problems yellow exclamation points by both the keyboard devices and touchpad device represented as another mouse I ve uninstalled Intellipoint software and allowed Windows XP Media SP to install generic drivers for which the mouse work fine Tried to update reinstall and replace drivers Synaptics PS/2 Port Touchpad problems for Synaptics PS Port Touchpad according to various instructions none of which were Synaptics PS/2 Port Touchpad problems successful The keyboard lights flash when rebooting but go off I didn t know if by luck my keyboard is just fried but it seems that there may be a trick to the way these drivers have to be installed I ve experienced all types of errors in my quest but usually when I attempt to install driver Device Mgr says quot A driver service is disabled for this device quot Or quot Synaptics PS Port Touchpad cannot install the service cannot be started because it has no enabled devide quot Also when I had the MS Mouse installed when I attempted to access the mouse software I get the message that it was unable to connect to the Synaptics Device Driver then opened anyway I ve also seen quot this may be because the INF was written for Windows or later quot I ve found NO good instructions on the proper procedure for processing these drivers on Synaptics site or Toshiba s site just a bunch of different versions that are all supposed to be compatible I assume it was the Microsoft Mouse Software or driver that started the whole thing and did I fry my keyboard in the process Many thanks for any help this is my third day on this project as I found out that CompUSA went broke and my warranty is worthless Tim nbsp

https://forums.techguy.org/threads/synaptics-ps-2-port-touchpad-problems.822945/
Relevancy 64.07%

I am using Lenovo Z51 and Windows 10. The multi-touch feature of touchpad is not working. I tried several times re-installing the Synaptics drivers but my problem is not resolved.Synaptics Settings?

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Synaptics-touchpad-settings-are-greyed/td-p/3471496
Relevancy 64.07%

 I can't seem to update my touchpad driver. I downloaded  and ran this version. 19_0_17_57_WHQL4/21/2016 But when I check to see if it installed, the driver installed is still the driver from 19_0_17_57 from Jan 6,2016 Help... Thanks,   

https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Synaptics-Touchpad-Driver-for-Windows-10-64-bit-won-t-install/td-p/3317782
Relevancy 64.07%

I am trying to find out if there is a way to disable highlighting text with the Synaptics touchpad. I have (enable tapping) checked. I want to be able to use tapping but not to drag & highlight text. I would like to highlight text with holding down the left button which I am able to do but sometimes text is highlighted when I don't want it to. Am I making sense?
Thanks for any help

A:Help with Synaptics Touchpad highlighting text

I don't think you can have one without the other. I think you would have to disable tapping to stop that from accidentally happening. That or use a firmer touch.

http://www.sevenforums.com/hardware-devices/253921-help-synaptics-touchpad-highlighting-text.html