Windows Support Forum

Wifi connection issues- fine on ethernet

Q: Wifi connection issues- fine on ethernet

I am on a Win 7 based computer. New apt, new internet connection. Old router.
Connects to net fine with an ethernet cable.
Connects to the wifi signal (strong signal) with password authentication BUT no internet access.
All my laptops are experiencing the same issue- so it does not appear to be related to the computer.
I then connected the ethernet cable to a Linksys E2000. Again, good signal, clear connection BUT no internet access.
What can I do??
IPCONFIG/ALL>myTCP.txt did not produce any results in DOS (why??)
Thanks in advance.....

Relevancy 100%
Preferred Solution: Wifi connection issues- fine on ethernet

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Wifi connection issues- fine on ethernet

IPCONFIG/ALL report:

Windows IP Configuration

Host Name . . . . . . . . . . . . : subra-tablet
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : westell.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 00-26-5E-C0-40-B0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : westell.com
Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN
Physical Address. . . . . . . . . : 0C-60-76-4A-97-6C
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7997:4b52:9da9:c46e%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.33(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, May 03, 2014 8:22:44 AM
Lease Expires . . . . . . . . . . : Sunday, May 04, 2014 11:55:35 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 302801014
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-4D-54-A5-00-26-55-C9-E7-55
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : westell.com
Description . . . . . . . . . . . : Atheros AR8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
Physical Address. . . . . . . . . : 00-26-55-C9-E7-55
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::790e:7ddd:2dfe:6f71%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.30(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, May 03, 2014 8:26:38 AM
Lease Expires . . . . . . . . . . : Sunday, May 04, 2014 11:56:07 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 335553971
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-4D-54-A5-00-26-55-C9-E7-55
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

PPP adapter Broadband Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadband Connection
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 117.202.95.249(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 218.248.255.147
218.248.255.146
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter isatap.{F6FA6232-213B-4DE8-A4CA-916428E73370}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter 6TO4 Adapter:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2002:75ca:5ff9::75ca:5ff9(Preferred)
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
DNS Servers . . . . . . . . . . . : 218.248.255.147
218.248.255.146
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter isatap.westell.com:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : westell.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #18
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{2C2F79EC-0B0F-4675-BC38-E302E5D33C1A}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #20
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 12:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:c17:3d4c:8a35:a006(Preferred)
Link-local IPv6 Address . . . . . : fe80::c17:3d4c:8a35:a006%39(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled

http://www.techspot.com/community/topics/wifi-connection-issues-fine-on-ethernet.202175/
Relevancy 18.92%

I have a HP Pavilion laptop that was able to connect via wifi, or ethernet, just fine until I recently upgraded it to Windows 10. The problem did not start right away, but could be associated with my security software (bitdefender). The laptop does recognize the router, but when I look into the settings I see that there is no connectivity in the IPv4 or IPv6.

Please let me know if additional info is needed to further diagnose this problem.
 

http://www.techspot.com/community/topics/no-internet-connection-on-laptop.217570/
Relevancy 25.8%

Hello, I'll try to be as clear as I can.

I have my computer hooked up to my router with an Ethernet cable. About an hour ago the Limited sign popped up. With the cable connected it says Limited, but I can freely use the internet. When I take the cable out, under connections it still only says "Ethernet Limited" and I can't use the internet. I'm not sure about any specs to my comp. All I know Is I'm using windows 8 and it's from Toshiba. I know it's not much to go on, but I'm losing my mind and any help would be wonderful. Thank you.

This picture is how it looks when the cable is, and isn't, plugged in.

 

A:Limited Access with Ethernet, even when not connected

With the cable pulled out, the picture is correct (for a wired Lan Connection).
When it is attached AND you have access to the Internet, it should not be limited.
SO, get a command prompt ( start->run and enter CMD ) and enter

IPCONFIG /ALL >myTCP.txt
then NOTEPAD myTCP.txt
copy the contents and PASTE that as your follow-up
 

http://www.techspot.com/community/topics/limited-access-with-ethernet-even-when-not-connected.217393/
Relevancy 43%

I recently bought a Laptop with an unknown OS (I forget the name, but it wasn't windows) and had to format it, and afterwards got Windows 7 working on it. For some reason, I'm not getting any wifi, help please
 

A:Issues with WIFI on new PC

Also, if it makes a difference, I'm able to connect to the internet with a cord, just not getting wifi
 

http://www.techspot.com/community/topics/issues-with-wifi-on-new-pc.217367/
Relevancy 18.92%

Hi guys Recently I ve been having trouble connecting to my mobile phones WiFi hotspot with my laptop I can connect to the hotspot with any other device such as the tablet I m using now and I can also connect to any other WiFi using my laptop The problem appears to exist purely between my laptop and my phone When issues hotspot Mobile attempting to connect it will begin authenticating and then disconnect offering me the troubleshooter Sometimes there is a small volume of packet transfer but not often I have tried disabling and reenabling all of my network adaptors to no avail and I m somewhat at a loss of what to do Mobile hotspot issues next The phone in question is a Motorola razr I if that helps but I have to point out that it worked flawlessly Mobile hotspot issues until recently I suspect the culprit may Mobile hotspot issues be hamachi as it had very recently been installed onto my computer at the time and it appears to be a known trouble maker But I still don t understand why no other problems have arisen Hamachi has been uninstalled but the problem persists Any suggestions or ideas that could help would be greatly appreciated Thanks for your time guys Mencil nbsp

A:Mobile hotspot issues

What OS is on the Laptop and which Firewall are you using?





The problem appears to exist purely between my laptop and my phone. When attempting to connect it will begin authenticating and then disconnect, offering me the troubleshooter.Click to expand...

huh? Connecting how: Bluetooth, Infra Red? The WiFi adaptors of both the phone and the laptop are never going to connect, unless you're attempting peer-to-peer which has limited utility.

If you're connecting via a router, then the PC is not the issue.
 

http://www.techspot.com/community/topics/mobile-hotspot-issues.194092/
Relevancy 42.57%

Just to start off I am COMPLETELY clueless and have no tech savvy whatsoever so simple language would be appreciated I ve owned this laptop for a little over a year and all this time I ve been able to connect to Wifi without a problem This morning the icon at the bottom left of but Laptop with Ethernet will Wifi, won't cord an to My connect connect the screen told me there was no Internet connection available when I troubleshot it it suggested using the Ethernet cord to connect The Ethernet cord connects them fine and the internet connection becomes available but I m still unable to use the Wifi This is an issue with my laptop because all the other devices My Laptop won't connect to Wifi, but will connect with an Ethernet cord in my house are able to connect to the Wifi and the modem is showing all the appropriate lights and such I ve tried turning it off and on again but alas this once that method has failed I ve also tried resetting the modem and it made no difference Last night I was uninstalling various programs that I didn t need and that s the only thing I ve done differently to my usual computing habits I don t think I removed anything unless I knew what it was but it s possible I accidently removed something important I don t know if that has any relevance or not but it s all I can think of as the reason for this My laptop is a Toshiba Qosmio and the system I use is Windows My modem is Telstra Bigpond Please help D nbsp

A:My Laptop won't connect to Wifi, but will connect with an Ethernet cord

How far from the router are you? I experience the same thing occasionally on my laptop.
I usually have to switch the wifi switch off on the laptop & on then I reboot & I'm back online. My laptop & tower are both about 50' away & on the lower floor where the router is. Good luck.
 

http://www.techspot.com/community/topics/my-laptop-wont-connect-to-wifi-but-will-connect-with-an-ethernet-cord.197531/
Relevancy 49.45%

Okay so before I begin I'd like to say I am relatively new to computing and I'm not the most knowledgeable.

Let me explain my setup:
I have a HP Envy SleekBook Laptop which is connected to my BT Wifi through a NetGear HomePlug which should give me wired internet.

I cannot move the router which is that the other side of the house and I decided to test me internet speed on speedtest.net I got nearly exactly the same values when using the ethernet cable and when connecting to the internet.

I often have ping spikes and lag in CS:GO.

That is my main issue and my secondary discussion is if this is a good setup : (I have ordered this stuff)

https://www.vibox.co.uk/promotions/defcon1blue
http://www.amazon.co.uk/dp/B00B7ZE0G2/ref=twister_B00L17TXY0?_encoding=UTF8&psc=1
http://www.amazon.co.uk/Corsair-CH-...id=1434810239&sr=1-2&keywords=corsair+k70+rgb

Thanks <3
 

A:Ethernet vs Wifi and Confusion

HMM. and your problem / question is ...
 

http://www.techspot.com/community/topics/ethernet-vs-wifi-and-confusion.216646/
Relevancy 25.37%

When I try and access the internet through any of the main browsers (I.e. Internet Explorer, Google Chrome, Firefox and Safari) they tell me along the lines of 'unable to access the network' and 'this page can't be displayed' after taking a while attempting to load. I also cannot access it through any of my Windows 8 apps. I know it's not an issue with the home broadband itself and is something to do with my laptop as it is running fine both wirelessly and through using an Ethernet cable on all other devices. I would really appreciate some help with trying to fix this asap as I have spent a lot of time researching this issue and trying most things to resolve it without success, I also need to use the internet for loads of coursework over the summer hols and cannot afford to be taking it to a pricey IT technician. Please helppp
 

A:My laptop cannot connect to the internet, even though wireless and ethernet are working

Take a look at the file
\windows\system32\drivers\etc\hosts​there MUST be at least a line reading 127.0.0.1 LOCALHOST
but the question is there anything other than comments in it?
If so, leave the comments and the localhost line and delete everything else.

If you modify the hosts file, then you also need to

ipconfig /flushdns
net stop "dns client"
net start "dns client"

 

http://www.techspot.com/community/topics/my-laptop-cannot-connect-to-the-internet-even-though-wireless-and-ethernet-are-working.195158/
Relevancy 47.73%

I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help

Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
 

A:Windows 7 can't connect to internet through Wifi or ethernet cable

Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
 

http://www.techspot.com/community/topics/windows-7-cant-connect-to-internet-through-wifi-or-ethernet-cable.200026/
Relevancy 25.37%

I have an Aspire one NAV50 with Windows 7 starter.

One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.

I've tried the ff on my laptop:

restart
update
scan the laptop with MalwareBytes
Fn+f2
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
 

A:Laptop would work on ethernet cable not on Wireless Connections

I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
 

http://www.techspot.com/community/topics/laptop-would-work-on-ethernet-cable-not-on-wireless-connections.201158/
Relevancy 25.37%

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.
 

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 47.73%

Hey guys,

I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.

The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.

Best Regards,
Om
 

A:Wifi on my laptop won't work but works when I use the ethernet cable

I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.

May be it will help you.
Regards
MD. MAHMUDUL HASAN
 

http://www.techspot.com/community/topics/wifi-on-my-laptop-wont-work-but-works-when-i-use-the-ethernet-cable.200754/
Relevancy 47.73%

Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
 

A:My WiFi on my laptop won't work but works with Ethernet cable

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-on-my-laptop-wont-work-but-works-with-ethernet-cable.206652/
Relevancy 46.87%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 18.49%

AMD has released an updated statement regarding the noise issues experienced by the initial buyers of its Radeon R9 Fury X graphics cards.

Read more
 

A:AMD issues updated statement regarding Radeon R9 Fury X noise problems

Are they saying "screams like a banshee until we smothered it in glue"? Does anyone have a more engineered approach to the issue - like decibels at a specific distance?
 

http://www.techspot.com/community/topics/amd-issues-updated-statement-regarding-radeon-r9-fury-x-noise-problems.216306/
Relevancy 18.92%

Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp

A:Windows 7 mouse freezing issues

This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.

http://www.howtogeek.com/howto/windows-vista/remove-old-drivers-after-upgrading-to-new-hardware/
 

http://www.techspot.com/community/topics/windows-7-mouse-freezing-issues.164226/
Relevancy 23.22%

How can I get my pendrive to it's previous state just by formatting or anything else.

Do I need to update my drivers after os installation for getting wifi worked ?
 

A:Pendrive and wifi problem

armahee said:





How can I get my pendrive to it's previous state just by formatting or anything else.Click to expand...

Not sure I follow you. When you format the USB drive it will be blanked.



armahee said:





Do I need to update my drivers after os installation for getting wifi worked ?Click to expand...

You will need to install the drivers for your Netbook after so the wifi will work, yes.
 

http://www.techspot.com/community/topics/pendrive-and-wifi-problem.213757/
Relevancy 26.23%

So this is my first time making a forum post since 169.xx ip address working, Ethernet not I am not desperate because nothing I ve tried has worked So two weeks ago I had an electrical surge in my house on my desktop the ethernet port on the motherboard died so I sent Ethernet not working, 169.xx ip address back my motherboard to have that fixed Now that I have it back I tried getting my ethernet to work though now the Ethernet not working, 169.xx ip address connection properly works as in Ethernet not working, 169.xx ip address the local area connection is now at least recognized I still have no internet access I just tried reinstalling Windows bit fresh install after I wiped everything My ethernet adapter is called Realtek PCIe GBI Family controller I have a E Linksys router and a Comcast modem I tried plugging the ethernet cable into each other but no luck Currently I m attempting to at least make the desktop use the modem internet directly I seem to be sending packets but not receiving them when I looked in the Status of the Local Area Connection in network connection details I have an autoconfiguration ipv of xxx xxx ipv subnet mask and nothing in the ipv default gateway dns server or wins server and no ipv default gateway I ve tried many things too many to name now but I am willing to try anything you guys mention and post the appropriate data or logs just tell me what it is you would like to see Any help would be highly appreciated nbsp

A:Ethernet not working, 169.xx ip address

Anytime you see 169.x.y.z, that's the clue that your DHCP request to the router did not get an answer.

DHCP should return an IP address directly related to your router's address and two DNS addresses.

search the form for DHCP - - I've posted a solution here on TS.
 

http://www.techspot.com/community/topics/ethernet-not-working-169-xx-ip-address.203386/
Relevancy 30.1%

Asrock-
Processor:Intel i3-3220
CPU 3.30 GHz
Processor speed:3300 MHz
Total memory: 4096 MB
Single Chanel memory
Ddr3_a1 4096
Ddr3_b1 none
CPU ratio auto
Intel speedstep tech disabled
Primary plane current limit auto
Secondary plane current limit auto
Gt overclocking support disabled
Dram voltage 1.500v
How can I make it better or should it stay this way BTW this is all default
 

A:Is my PC fine?

Is this a pre-built computer or did you build it yourself? If this is a pre-built computer, could you please provide the make and model information.
The information you provided does not give us enough information to determine what you can / should do. I can see that you have an Intel i3-3220 CPU running at 3.3GHz and a single stick of 4GB Ram running @ 1.5V, and possibly an Asrock motherboard, but need more specifications.
Also, what do you plan on doing with the computer (gaming, web browsing, reports, video editing, etc)?
 

http://www.techspot.com/community/topics/is-my-pc-fine.213554/
Relevancy 23.22%

I recently moved to a new home and I set up my pc and the wireless adapter can't even see the wifi despite picking up my neighbours which have very weak signals.
My phone and my laptop both see it and connect with full strength.

What do I do?
 

A:Netgear N300 can't see wifi

Try the factory reset. There's a a small reset button in the back, press it down (sometimes you have to use a pen if it's one of those pin hole things) for about 5 seconds and that takes it back to factory settings. At that point you can either run the install CD that came with the router, or set it up manually from your browser.
 

http://www.techspot.com/community/topics/netgear-n300-cant-see-wifi.212510/
Relevancy 18.92%

For about the past month or so, my W7 tower on DSL occasionally loses its connection to the internet so I right click the the icon in the notification area & click trouble shoot & it reconnects yet my iPhone & Ipad remain online no problem.
Why?
 

A:Intermittent DSL connection problems

Clearly the router is doing find and the activity on W7 IS THE ISSUE.
Examine carefully what was active when the connection was lost.
 

http://www.techspot.com/community/topics/intermittent-dsl-connection-problems.207951/
Relevancy 25.8%

Alright I ll make it short but informative I can t connect cable able internet Only via to ethernet to connect to the internet without an ethernet cable I have tried pressing the laptop s quot WiFi quot button but nothing has happened The light didn t even change I have tried Only able to connect to internet via ethernet cable rebooting and going into BIOS to see Only able to connect to internet via ethernet cable if there was on option there nothing I Only able to connect to internet via ethernet cable have tried going into Device Manager and under quot Network Cards quot I got options I believe I had options though now I have only first I tried to deactivate it and the reactivate it but that just made it not work at all and when I got home and got my connection back I tried to update the drivers which is when I noticed I only had because I was at school when all showed up so I didn t have connection to update them but it just said that they were all up to date I have tried using the windows recovering tool to go back before the problem occurred Though I did get an error the first time due to my AVG being up so it couldn t complete but after that I tried doing it again with AVG off but the situation didn t change and I know the problem isn t with the router as the problem occurs with different WiFi s In the beginning it would only say quot can t connect to the internet quot over and over again but now it won t even show the available WiFi networks in the area Any help is much appreciated nbsp

A:Only able to connect to internet via ethernet cable

Any suggestions at all? if you require more information in order to come up with a solution, just tell me what you need an ill try my best to figure it out
 

http://www.techspot.com/community/topics/only-able-to-connect-to-internet-via-ethernet-cable.212310/
Relevancy 49.45%

My computer is able to connect to the internet through an ethernet cable, but no devices besides my tv is able to wirelessly connect at all. The internet doesn't even show in the Choose A Network tab on my Ipad.
 

A:WiFi isn't working but ethernet is

What is the make and model of the router or modem you are using? What type of internet connection do you have (DSL / Cable / Satellite / etc). What have you done so far to try to correct this problem (reboot equipment, change settings, unplug then re-plug equipment, etc.)? Need to provide more information before anyone can really try to help.
 

http://www.techspot.com/community/topics/wifi-isnt-working-but-ethernet-is.212323/
Relevancy 21.93%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 26.23%

I've got excess ethernet wire, despte how ridicules it may sound, can I use the ethernet wire to make an extension for my headphones?
 

A:Headphones using ethernet wire

It would be a similar process to this:

though I don't know how good a job it will do.
Here's more reading about this topic - http://www.head-fi.org/t/537117/the-y-split-thread
 

http://www.techspot.com/community/topics/headphones-using-ethernet-wire.210084/
Relevancy 16.77%

I have been having this issue for about 2 weeks now. Ive literally tried everything including uninstalling/reinstalling network card, restore points (there are none), a windows update download, and reformatting the hard drive (wont let me). Any help is appreciated. I cant afford a new pc or any new hardware at this time.
 

A:"Failed to query TCP/IP settings of the connection. Cannot proceed."

failed to query tcp/ip settings of the connectionClick to expand...

what did you do when this occurred?

Describe network equipment {modem, router} ISP, and your system.

Connect it all together, get a command prompt, enter ipconfig /all >myTcp.txt
and come back here and paste the contents of myTcp.txt as your reply
 

http://www.techspot.com/community/topics/failed-to-query-tcp-ip-settings-of-the-connection-cannot-proceed.177223/
Relevancy 47.3%

Hi there,

The laptop I have is an asus P550C, windows 7.

This laptop came pre-installed with Mcafee Antivirus protection for a limited amount of time. Wifi was working perfectly fine although there were occasions where the connection would disconnect by itself. After the free-trial ended, I did not want to buy the packaged they were advertising so I went to my Control Panel and uninstalled Mcafee. This was when the problem started to occur. The internet access icon had a red x and when I went to diagnose the problem, it said that I needed to connect via an ethernet cable. Since then, I have connected it with an ethernet and internet works and I have also installed AVG's free antivirus software.

I have tried to
type: ipconfig /flushdns
type: nbtstat -R
type: netsh int reset all
type: netsh int ip reset
type: netsh winsock reset

But I still cannot connect via wifi. Please help
 

A:Wifi has stopped working but still able to connect to internet via ethernet cable

C:\Users\jay>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : jay-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : vlan1.phub.net.cable.rogers.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 54-35-30-05-36-68
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : BC-EE-7B-28-57-D7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9dfa:dcc6:3d3b:ae86%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : March-27-15 4:14:52 PM
Lease Expires . . . . . . . . . . : March-28-15 4:14:52 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 247262843
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-51-D7-D4-BC-EE-7B-28-57-D7

DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.vlan1.phub.net.cable.rogers.com:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{A9DA0935-EE1F-4A59-8A97-DDA13A7DFFEA}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:2c47:1b6c:9c1d:d26b(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::2c47:1b6c:9c1d:d26b%14(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\jay
 

http://www.techspot.com/community/topics/wifi-has-stopped-working-but-still-able-to-connect-to-internet-via-ethernet-cable.210787/
Relevancy 18.92%

It's been a long time since I last posted on this forum but this has been stumping me as of late.

I have a Thermaltake Water 2.0 Performer liquid cooling loop for a while and lately they have been acting up. I noticed that my temperatures on idle could sometimes go up as high as 80 celcius, which is absolutely not right.

This happened after I serviced my machine, and I think I bumped the liquid cooling around in the process of it. I noticed however, if I keep knocking my radiator on the side, the reported temperatures get cooler, and I notice that I can feel the hot air being dissipated from the fins (previously cool). The thing though is that after leaving it for a while again, the fins don't seem to dissipate anything, and the cpu temps start rising again.

I have a feeling that there are air bubbles getting stuck in the loop somewhere, but I have no idea how to get them out or at least out of the way in a closed loop.

Anyone have any suggestions/ideas?
 

A:Water Cooling Loop issues

Remove the cooling pad from the CPU. Make sure that the top of the CPU is clean. Apply new heatsink compound if it is used and re-assemble
 

http://www.techspot.com/community/topics/water-cooling-loop-issues.210641/
Relevancy 22.36%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 36.98%

Hi all So I got G today from an online webstore today I ve been using a super old button logitech back-up mouse since my G died I ll describe my procces thus far Plugged in G when computer was on No sign of life windows tries to install a driver fails Device manager lists the G under Other devices with a yellow triange telling me no driver is installed Then went to logitech com to download the drivers and support software LGS LGS being the Logitech Gaming Software utillity that is the only downloadable support from logitech com fails to recognize my mouse just the G keyboard I Logitech issues G502 connection/recognition mouse have Tried the troubleshooting option of rebooting and re-installing the LGS no dice However the G does light up during booting up Booted the computer with the backup mouse unplugged and the G plugged in It works cursor movement left right click no advanced buttons for - mins before going back Logitech G502 mouse connection/recognition issues to the Device fail to install and the Device Manager placing it under other devices etc Plugged my backup back in tried manually updating drivers in the Device manager selecting it as a Mice and other pointing devices type of device and choosing the drivers from LGS drivers LGSHidFilter tried all subfolders of drivers but this one was the only one that held any inf files the Device Logitech G502 mouse connection/recognition issues manager recognised as a good drivers Selected the g driver No G driver was listed only a G s It tried to install but gave the error Device could not start code After reading threads in the logitech forum tried the FWUpdate a firmware update for the g option but installer tells me to connect my mouse before proceeding Even though my mouse IS plugged in Plugging it in and out doesnt help As for now im at my wits end I even tried borrowing someones g mouse and encoutered much the same issues All I can think of is to race from booting up with just the G plugged in to either the FWUpdate or the manual install from the device manager and see if the install goes through when it still works Seems rather unlikely and a silly way to go about things I hope anyone with similar issues can help me out any advice is super appreciated P S oh using Win ultimate bit nbsp

A:Logitech G502 mouse connection/recognition issues

I just fixed this exact problem on my Win7 Media Center x64. It's a bit convoluted, but the core of the issue is Windows not recognizing the device type properly. What you have to do is open up Device Manager and assign the drivers for Windows. This should fix the mouse.

Head into Device Manager and click View up top. Choose Devices by Connection. You'll see why in a second.
Expand the top entry until you find a PCI Bus. Expand that, then expand all the USB Host Controllers. One of them should have an entry for G502 Gaming Mouse under it.
Right click it and select Update Driver Software, then Browse My Computer for Driver Software. Now click "Let me pick from a list of device drivers on my computer."
Go down to USB Devices and install it as a USB Composite Device. The mouse should light up. Nice! It still doesn't work, though.
Now there'll be two more entries underneath the USB Composite Device, both of which should be G502 Gaming Mouse. Right click one and go back to the list of device drivers. This time go to Human Interface Devices and select USB Input Device for each of them. A bunch of new devices should populate beneath each USB Input Device, one of which should be HID-Compliant Mouse. Your mouse should now work!
 

http://www.techspot.com/community/topics/logitech-g502-mouse-connection-recognition-issues.205348/
Relevancy 18.49%

Okay so I've read the other threads and figure that...well...I figured nothing.

Audio sounds great. It's from my gigabyte motherboard, not from an expansion card. I have a jumper cable running from my mobo to my video card for the audio signal. When there is no audio playing on my computer, there is a sort of static buzz that has what seems like a specific rate to it... "blip blip____blip blip___blip blip"..... sort of like that

All inputs/recording settings have been disabled.

The only fix I have is to basically open an app (winamp) and have it play audio at 0% volume. It's kind of stupid and would prefer to not have to do this. Any advice would be appreciated. Thanks.
 

A:Buzzing when no sounds play over HDMI connection

I have a jumper cable running from my mobo to my video card for the audio signal.Click to expand...

That's the norm for HDMI. HUMMMMMM or other noise when no sound is being produced intentionally is usually a grounding or cable shielding problem.

To be honest, my laptop HDMI is iffy; by that I mean, a connection to the HDTV at home and at one auditorium is just fine, but at another location, I get hum all the time both with and without sound originating from the laptop - - using the same hdmi cable.

The laptop has a plastic case and of course can not be shielded and therefore subject to 'environmental' interference'

In normal audio circuits, a/c hum indicates poor or no shielding (ie grounding) OR
the leads on the audio cable are reverse - - the ground on the cable is wired (by mistake) to the audio hot lead (ie the input).

On your PC, make sure you have a grounded A/C power cord and the wall plate has an active ground connection.
 

http://www.techspot.com/community/topics/buzzing-when-no-sounds-play-over-hdmi-connection.209553/
Relevancy 32.25%

I have an installation folder on my main machine(Windows 7) with all my software. I have repeatedly run into issues connecting odd devices to my shared folder. This time I have installed Windows 10 Technical Preview (on a different machine) and don't understand why it tells me I can't access my own machine. After all these years, you would think user friendly would be a reality. It seems to be a coin toss as to which machines will connect. I hate never knowing I can access my own machine without issue. Here I am trying to install applications but yet I can't get to my storage location.

What is the secret to sharing your machine, so that anyone on the same network can access shared folders?

Edit: I always turn on "Network Discovery" and "File and Print Sharing".
 

A:Network connection issues (year after year)

I'm more brutal via the firewall:

set trust localhost and your lan ip's, eg 192.168.0.1/24

then add two rules for only the PRIVATE PROFILE

inbound allow tcp/udp from 192.168.0.1/24 to any for ports 137-139,445
outbound allow tcp/udp from any to 192.168.0.1/24 for ports 137-139,445
I use a much more complicate scheme in reality to enforce known vs unknown devices and to segregate WiFI from wired access, but that's just me.

In services, ensure these are running

Bonjour Service ( mDNSResponder)
fdPHost
Network Connections
Network List Service
Network Location Awareness

 

http://www.techspot.com/community/topics/network-connection-issues-year-after-year.208880/
Relevancy 18.49%

Hello guys I have not been here in awhile but I hope there s someone out there PS4 Firewalled Xbox One issues NAT Double - and (Modem/Router) that can help shed some light on the issue I am having Hopefully someone can suggest a fix and it ll all work or at least point me in the right direction Xbox One and PS4 NAT issues - Double Firewalled (Modem/Router) and possibly explain anything I may be overlooking or misunderstanding I have a basic understanding of networking so I can work my way around my routers and modem etc To start a small introductory of my issue as you can see from the title I have an issue getting Open NAT for my PS and Xbox One I have firewalls to go through my network setup is as follows Modem gt Router Router Router Bridged gt Device However I have other Routers in the house that are bridged to extend strengthen signal in different parts of the house I have opened the suggested ports for Xbox One on both my Modem ZyXel P- R-F and my Router TL-WR ND I have not configured any special settings on the bridged routers the PS connects by wire Xbox one by wireless same floor as the main Router I have followed guides on setting both of them up First on Portforward com then found a video for my ZyXel modem and it suggested to disable the Active Firewall and Bypass Triangle Route Also to change the NAT SUA Only changed to it was Lastly it suggested to turn off the Enable SIP ALG setting For my router some suggested to just let UPnP do it s job and disable the Port Forwards Virtual Servers it s called in the settings I have tried with just UPnP and with Port Fowards neither make a difference I even disabled the Port Fowards on the Modem and had UPnP on both but to no avail To clarify something if I use Port Fowarding should I have UPnP off OR will they work in together I have done restarts on all devices router modem Xbox One when any changes have been made On my XBO I have turned it to quot Energy Saving quot mode as I have read in several places that it can effect UPnP negatively if it is in quot Instant On quot mode I have tried to set the Reserved Address in my Router for my XBO as another site video said that having a Static IP set on the XBO can cause problems I have tried the static IP set through the XBO and through the router neither makes a difference On my Router I have several firewall settings that are not mentioned by any guides as to if they should be altered the settings allow me to Disable or Enable All currently enabled Firewall SPI Firewall VPN PPTP Passthrough L TP Passthrough IPSec Passthrough ALG FTP ALG TFTP ALG H ALG RTSP ALG I also tried to set up Port Triggering to see if that would help and set the protocol to ALL for all of them originally set them up to the proper TCP UDP but it wasn t working so I changed it to ALL But that did not work either I am not sure if I am missing any other information feel free to ask for anything I am missing My LAN address for my Modem and Router are different eg Modem and for my Router Will this effect how NAT works or cause my issues Thank you P S I know I have not added any troubleshooting for the PS I do not own it and I want to get one device working before I start fiddling with the next nbsp

A:Xbox One and PS4 NAT issues - Double Firewalled (Modem/Router)

Is there no one out there who's network expertise could help me? Hoping this one bump will get this some attention as I have tried everything possible I can with my setup that I can think of, need some fresh ideas.
 

http://www.techspot.com/community/topics/xbox-one-and-ps4-nat-issues-double-firewalled-modem-router.208494/
Relevancy 23.22%

I have been having a problem on several devices conecting to my WiFi router saying there is a problem with Authentication. I have just relised that if I disconect the ethernet cable from my desktop computer to the router the WiFi works without porblems and as soon as I reconnect it I cant connect to the WiFi anymore. I using windows 8.1.

Any suggestions?
 

A:Can't connect to WiFi when LAN connected.

What is the make and model of your WiFi router? It sounds like a setting is enabled within the router that is giving precedent to your Ethernet connection over your wifi connections.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-when-lan-connected.208892/
Relevancy 16.77%

As you've probably heard by now, Nvidia is having a few issues with their GeForce GTX 970 graphics card. In response, AMD has lowered the price of the card's main competitor, the Radeon R9 290X, in an attempt to get...

Read more
 

A:AMD cuts Radeon R9 290X price amid GTX 970 "issues"

Meaning AMD could have been selling the card cheaper this whole time.

AMD needs to stand more firmly in their business decisions. Changing prices on a whim every time the wind blows, shows lack of confidence in their product to sell itself.
 

http://www.techspot.com/community/topics/amd-cuts-radeon-r9-290x-price-amid-gtx-970-issues.208450/
Relevancy 74.82%

My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
 

A:Internet connects but doesnt work on wifi, ethernet works fine

Bump
If there is any more info I can give to help you help me, please let me know.
 

http://www.techspot.com/community/topics/internet-connects-but-doesnt-work-on-wifi-ethernet-works-fine.199827/
Relevancy 18.49%

Hey!
I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?

These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Aspire V5-V561PG-9683
Model number: Z5WV2

If you need more info let me know, I still have everything for it.
 

A:Acer Aspire issues; Games no longer work

If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
 

http://www.techspot.com/community/topics/acer-aspire-issues-games-no-longer-work.208471/
Relevancy 33.97%

I am looking to replace my tired Linksys WRT54G router that is about 10 years old. I love the router, and its even better with DD-WRT on it, but I'm starting to have troubles with the wifi dropping all the connects for a couple seconds when running all my wireless devices. I have 3 smart phones, 2 tablets, 1 Chromecast, a smart TV, and Roku + a laptop or 3 in my house right now, and it seems like its getting to be a bit much for it.
I have had to completely re-flash the firmware twice this year to get the wifi working again, so I'm thinking its time for replacement.
I have been thinking about just getting the new WRT54GL for $50, but I'm also thinking it might be a good idea to upgrade the wifi technology past wireless G .
I'm wondering if my Tablet (Nexu 9), and our smartphones (Razr HD Max) along with the Chromecast will take advantage of the new wireless standards and higher speeds or not? If they will can someone recomend a decent wireless router that takes DD-WRT nicely in the sub-$100 range? Thanks!
 

A:Looking for new Wifi Router - Will Tablet/Smartphone take advantage of new wifi Standards?

I been programming in Android/Linux since 2010 and there is code that supports VHT is Very High Throughput. Right now the standards are HT is High Throughput .

As for DD-WRT firmware is like your overclocking your router pushing it beyond the OEM limits. I use to use DD-WRT but had quit many years ago since the routers that used that firmware would fail too much.

So best to buy a better business type enterprise router wired then you can use WiFi router as AP or just get WiFi AP(access point). To me WiFi Router is also Wired Router, but to use just a wired router and use WiFi AP through a switch is better. If one or the other goes you can easy replace them. Where as if the WiFi Router fails you would need to replace it.

If you really want to use DD-WRT then Look at Buffalo WiFi Routers some come pre-installed with DD-WRT on them. Frankly you really don't need DD-WRT today because newer routers or WiFi routers are much better built and offer much more power NPU = network processor units and 128, 256, 512, 1GB of RAM some have Dual Cores.
 

http://www.techspot.com/community/topics/looking-for-new-wifi-router-will-tablet-smartphone-take-advantage-of-new-wifi-standards.207572/
Relevancy 18.49%

So I recently picked up this monitor for some sweet 144hz gaming. Used it for a while at 144hz and it worked perfectly. Recently hooked up a second monitor and noticed a drop in frames. Went to check my advanced resolution settings and for some reason my monitor had defaulted to 60hz. When I tried to bump it back to 144hz I get this weird flickering/artifacting going on but it works great at 120 hz. I am using the dvi cable that came with the monitor and I'm running a gtx970 overclocked to 1430hz gpu and 7600 hz memory. I get this effect when I default my gpu to it's factory oc settings so I'm not sure what's going on here. Is it my gpu or do I need a new dvi?

Cheers
 

http://www.techspot.com/community/topics/144hz-refresh-rate-issues-asus-vg278he.208035/
Relevancy 23.65%

Okay, this is very weird. when I connect to my wifi on my laptop the internet doesnt work. It says connected and everything. it says it has internet access. It just doesnt work. But if I connect my phone to the wifi and use USB tethering to my laptop it works. :/ Help please.
 

A:Wifi problem

Hey RenRoo.Have you tried a another browser? Does the wired connection to the router work? If yes, I would go into Device Manager, and click the + sign next to Network Adapters.Right click on the wireless adapter and select uninstall.Exit, reboot the system, allow the system to "find" the wireless adapter, then check and see if it will connect. If you still have the same problem, connect via your phone and in Device Manager, try to update the driver.
 

http://www.techspot.com/community/topics/wifi-problem.207956/
Relevancy 18.92%

I have dsl high speed internet and I called them because it kept cutting out and they said it was our router because it was 5 years old so I got a new netgear r6100 dual band router (120 $) , our modem is about 2 months old the phone line coming into the house is new (new house) but the line going to the box on the road is old could that be the problem? when we first got the internet it was awesome then they upgraded the speed coming through the line and it slowly got more and more less stable now its cuts out all the time?
 

http://www.techspot.com/community/topics/dsl-connection-cuts-out-every-10-minutes.207847/
Relevancy 18.92%

Hey guys my device is hp compaq 6200 pro microtower pc
serial no. : SGH125P585
n product no. : XL504AV

I have inbuilt intel hd graphics n no installed a external one n plannin to upgrade gpu
I have 320 watts of psu n plannin to upgrade to 550 watts

I have a pci x16(2.0) pci slot
but dont know whether it is low profile or full height ???

my pci bracket is 4.2" long so it must be a full height na!!!!!!
I wana know how much long graphics card my device can support!!!!

I wanna use a mid -range
msi nvidia gtx 750 2 gb oc ddr5

http://www.msi.com/product/vga/N750-2GD5OC.html#hero-specification

or
leadtek gtx 750 2 gb oc ddr5
http://www.leadtek.com/eng/product/1/697/intro.aspx
will
both d graphics card support my device?????
 

A:Graphics card issues

rockyrulz said:





I have 320 watts of psu n plannin to upgrade to 550 watts

I have a pci x16(2.0) pci slot
but dont know whether it is low profile or full height ???

my pci bracket is 4.2" long so it must be a full height na!!!!!!
I wana know how much long graphics card my device can support!!!!Click to expand...

I'd say yes you have a full height card. The half-height is only about 2 inches. If you upgrade your PSU to 550 like you said you would, I see no reasons why you couldn't run a 750. The 750's are not long cards and should fit in your case with ease.
 

http://www.techspot.com/community/topics/graphics-card-issues.207671/
Relevancy 26.23%

Over multiple devices on the network wifi works including this laptop I m running on However any time I try to use ethernet including on this laptop there is no internet connection The error when troubleshooting is Wi-Fi Works, Ethernet Doesn't Dns server not responding While on ethernet connection Wi-Fi Works, Ethernet Doesn't I can access the networked printer but cannot access the default gateway so connection is going from room to the modem and through I have tried restarting the wifi lan modem which then connects to another router down stairs which I haven t restarted my dad won t let me I have tried flushing dns uninstalling and re installing the adapter starting in safe mode with networking This is my ipconfig all while on wifi Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c d f d a Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Ethernet Media State Media disconnected Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d d e fbb a Preferred Link-local IPv Address fe e fbb a Preferred Default Gateway DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - NetBIOS over Tcpip Disabled Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here it is on Ethernet Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Media State Media disconnected Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Ethernet Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe b c dc Preferred IPv Address Preferred Subnet Mask Lease Obtained Thursday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Any help you could give would be mu... Read more

http://www.techspot.com/community/topics/wi-fi-works-ethernet-doesnt.207715/
Relevancy 18.92%

So this thread is probably going to have a lot of information on it Timeouts Other Network Issues & but please don Timeouts & Other Network Issues t be discouraged I really really need help with some issues I ve been having and if someone could solve this for me that would be amazing So I ve been experiencing timeouts It seems I get timeouts whenever using Timeouts & Other Network Issues some sort of wired connection If I used an ethernet cable connected to my router I would get timeouts in several applications such as Minecraft and Teamspeak If I used Wireless I was fine So after lots of troubleshooting I couldn t find a fix so I ve been using Wireless ever since Lately however my wireless has been unusually slow not for everyone in the house just for me So what I did to solve the issue is I setup a D-Link DIR in my room to act as a Wireless Access Point I now get slightly faster speeds and bar connection rather than the bars I was getting previously Now I thought I wouldn t get these stupid timeout errors when connecting to this Wireless Timeouts & Other Network Issues Access Point turns out I still do On Teamspeak for example I will be talking to people and everything will be completely normal I won t lag or anything and then BOOM I get disconnected As I said no lag no warning I just get disconnected It s almost as though my router is randomly cutting me off So what I thought I d do was replace my primary router BoB Lite with the D-Link DIR and then use Wired connection because I assumed that the BoB Lite was causing the timeout issues Now I can t even connect to anything wired I must have changed a setting when troubleshooting or something But now I can t source internet from my laptop ICS and I can t connect to my original or new router wired The only way I can currently get internet is by using the DIR in my room but I still get timeouts when using applications such as Minecraft and Teamspeak So yeah multiple issues Firstly if I could just solve the timeouts then that would solve everything I could continue connecting to the modem in my room and everything would be fine OR is there a way I could someone reset all my network settings that I may have messed up when troubleshooting As I can no longer connect to any modem with a wired connection not even the DIR which could have solved the problem If anyone could help me out that would be GREATLY appreciated This is a really annoying issue and I ve tried to troubleshoot it myself for ages now but with no luck IF anything in this thread doesn t make sense to you please tell me and I ll gladly explain myself Additional Summarised Information My primary router is a BoB Lite my ISP is iiNet The modem in my room is a D-Link DIR I m using a NetComm N USB Adapter to connect to Wi-Fi I m using Windows Ultimate -bit Thanks very much Innug nbsp

A:Timeouts & Other Network Issues

Get a command prompt
enter PING 8.8.8.8

does that timeout or return timing values?
 

http://www.techspot.com/community/topics/timeouts-other-network-issues.207544/
Relevancy 19.35%

Hello everybody, I'm having a problem with my wifi-connection, it is limited, can someone please help me
I'm using windows 8.1 Pro and here is the problem:

note that this only happens with that wifi network and only with my Laptop, my Laptop can connect with the other wifi networks and the other wifi networks can connect with that "Fiber Pagoda" networks
Here is the ipconfig/all says:

I've tried all the ways that I found the internet:
- reset modem
- set static ip
- uncheck ipv6 protocol
- reinstall windows
- renew ip:
When I renew ip, it said:

-reinstall my wifi-driver:
Here is my driver:

-update windows
but none of it can fix the problem
please, please, please help me !!!
 

A:Wi-Fi connection

Try changing the Wifi security setting in the modem. You should be able to access the setting by typing http://192.168.1.1 in your browser address bar. I had an HP laptop that was very particular about the security type. I believe it wouldn't access using WEP but would using WPA2.
 

http://www.techspot.com/community/topics/wi-fi-connection.207660/
Relevancy 41.71%

I am confused and have no idea where to start... I apologise in advance for the wall of text.

Recently I have been experiencing odd issues with my WiFi router ( at least I think its the router) ZyXel Keenetic Giga II. The most annoying of which is the periodic inability to load random webpages. For example, I might be able to load google but not any of the search results while at the same time being able to browse reddit on my phone or tablet. The pattern changed constantly and it doesn't seem to affect any particular web pages. Like I said - random. This happens once or twice a week and seems to be increasing in frequency. I have tried rebooting the router. Rolling back to factory settings, changing DNS. With no result. It only resolves itself when it "feels" like it and usually lasts from 5 min to several hours. It is also worth mentioning that I hardly ever use my laptop and most of the browsing and streaming is done using various mobile devices.

Any help in defeating my router would be greatly appreciated.
 

A:Strange issues with WiFi router

Describe "The most annoying of which is the periodic inability to load random webpages" in detail please - -
 

http://www.techspot.com/community/topics/strange-issues-with-wifi-router.207497/
Relevancy 22.79%

I got a new laptop recently (this past Sunday) and ever since I turned it on I've had horrible issues with WiFi. It's tothe point where I'm ready to return it to the store and just go without a computer. Keep in mind I'm not very tech savvy, so I might not know what you're talking about.

It's very slow and won't stay connected to the internet. 4/5 times it doesn't load the web page I'm trying to load and after about 5 minutes after powering on it disconnects from my Wi-Fi and refuses to reconnect. The troubleshooter says it's a router issue but resetting the router doesn't do anything at all and no other device in the house is having any issues. I haven't downloaded ANYTHING to it yet. In addition, when it /does/ connect to my Wi-Fi, trying to open any web page brings me to a "you are not connected to the internet" notice.



I have no idea what to do. I need a computer for work but I'm so sick of having problems with them.
 

A:Brand new laptop; faulty wifi process?

Set up the laptop next to the router where the signal should be strongest. Are you sure that you are connecting to your own wi fi network and router? When you switch on the laptop it will search for in range networks and when you spot your own you are asked to give the password before you can use the internet for the first time. If that's not happening maybe its logging you on to a neighbouring unsecured network (no password set) where the signal is weak. If I click on the wireless icon bottom right in my taskbar it brings up a choice of available networks. My icon looks like a set of steps and so the icon shows how strong the signal is. Check that you are connecting to your own router and see how strong the signal is. You mention other devices that work OK but haven't given any details.
 

http://www.techspot.com/community/topics/brand-new-laptop-faulty-wifi-process.207589/
Relevancy 18.92%

Hello So long story short I have had networking issues across the board on my home built desktop for over a year and a half now Basically my Odd Performance -- Fluctuating Issues Wi-Fi internet success fluctuates throughout the day and some programs Especially Origin absolutely fail to reach a fraction of my internet speed Doing speed tests on Odd Wi-Fi Issues -- Fluctuating Performance devices throughout my home network I am receiving a mean download speed of down While my desktop can barely manage to reach down My network adapter works fine I m typing this from my desktop as we speak and I have replaced it a few times I have been looking into this for months so ANY help would be perfect to hear and I can look up any troubleshooting information that could help I ve tried Odd Wi-Fi Issues -- Fluctuating Performance the old common misconception that a faulty DNS server is to blame didn t work as my current ISP Time Warner s DNS server is the best connectivity for my area I ve updated all drivers many times gone through windows settings and tried to tweak with tons of settings and adjust network consumption settings in gpedit So I m wondering what the deal is Like I said it can t be my router or ISP because my other devices work fine and work x as fine I ve tried disabling my firewall as well nothing Could my PC think my network is public and not private and be blocking a lot of traffic Do I need to allow ports for servers to be able to connect with my home network Could there possibly be a setting somewhere in Windows that is doing this to me That is not allowing my internet to go through I would really appreciate help guys I ve looked all over the internet and found lots of other people with the same issues but no one knows what the solution could be Thanks Again for ANY suggestions you can provide nbsp

A:Odd Wi-Fi Issues -- Fluctuating Performance

What are you using for WiFi Router. Are you using rental equipment from TW? Are you using all-in-one device to manage, CATV, Digital Phone, WiFi, Cable/Router/Modem. Do you have anything like that. If so has the ISP sent a hit or firmware patch to this device.

PC with the issue how the desktop connected? Via Ethernet Cable or WiFi.

So you pay for 22 mbps down but seeing only 2 mbps down on your desktop . Have you replaced the anything lately? Have you upgraded that Windows 8 PC to Windows 8.1?
 

http://www.techspot.com/community/topics/odd-wi-fi-issues-fluctuating-performance.207517/
Relevancy 22.79%

Hi,
I installed Win 7 32 bit on my Lenovo G519 laptop. Now I want to use my wireless Internet but can't find the way I can turn on that laptop!!
I tried Fn+F5 and also F5 but it's still turned off.
How to turn on wireless in that laptop please?
 

A:How to turn on wifi in Lenovo G510

Do you see any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/how-to-turn-on-wifi-in-lenovo-g510.207096/
Relevancy 24.94%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
 

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
 

http://www.techspot.com/community/topics/windows-7-computer-says-connect-via-ethernet-and-ping-confirms-but-cannot-get-to-any-page.207373/
Relevancy 18.49%

My laptop doesnot load when it is in hibernate or sleep. if I want to load it,I must have refresh mycomputer many times as soon as it boot up!
 

A:Asus N53SM wake up from sleep issues

This may be caused by a faulty video driver. Check to see if there is a update for the video driver and make sure you have applied all the Windows Updates
 

http://www.techspot.com/community/topics/asus-n53sm-wake-up-from-sleep-issues.207218/
Relevancy 22.79%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
 

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
 

http://www.techspot.com/community/topics/cant-connect-to-wifi-after-hardware-driver-update.206983/
Relevancy 48.16%

Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.

I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.

I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.

Does anyone knows how I get back my wireless connection? Pleasee
 

A:WiFi doesn't work only with cable ethernet

Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
 

http://www.techspot.com/community/topics/wifi-doesnt-work-only-with-cable-ethernet.207136/
Relevancy 22.79%

Hi all I have to the WLAN work as rather Router on from a WiFi LAN a a typical situation in my Internet and LAN setup My ISP provides me with a direct LAN cable that I need to connect either into my PC or into the WiFi Router WLAN port I also have a LAN that I need to connect to so I have installed a separate LAN card for the internal LAN purposes My two setups are below with their issues I hope someone can suggest a middle grounds to have a LAN and a WiFi too Scenario The ISP cable goes into the WLAN port of the Router Cables from the router goes into my PC network card and to other PCs for LAN purposes The PC cards are all configured to automatic IP LAN Internet WiFi is now available This works fine for a few days and then the internet stops working because there is a conflict of IP The ISP expects IPs like xxx and the one on the LAN Router for my PC is Scenario Router to work as a WiFi on the LAN rather from a WLAN The ISP cable goes into network card internet sharing is enabled Router to work as a WiFi on the LAN rather from a WLAN and automatic IP with the ISP s expected IP xxx Another cable goes from my PC s network card fixed IP into the regular LAN port of the same Router Without any issues over the months the Internet works the LAN works other PCs have fixed IPs too etc but no Wifi Can I have best of both the worlds in such a situation I can t install a rd network card for sure as the slot on the mother board is limited Please advise Thanks in advance Bhavbhuti nbsp

A:Router to work as a WiFi on the LAN rather from a WLAN

Code:

Scenario-1
isp==>(wan)router-->PC card-1, et al (conflict 123.237,234.xxx v 192.168.1.100)

Scenario-2
ISP===->pc card-1
pc card-2==>router
scenario-1 is a configuration or firmware condition
scenario-2 is a real security issue and the primary PC is basically acting as a DMZ server and is at risk.
Here's my setup:
Code:

isp==(wan)router-1--- PCs in the same room
|
+---(lan)router-2(with wifi) - - - wifi connections in the den

configuration to make this work with full file/print sharing:
router-2:

disable DHCP in this router
setup all WiFi settings here
notice: router-2 wan slot is left empty to make this work
Router-1:

set LAN address of router one as you please (eg: 192.168.1.1 )

set an address reservation for router-2's MAC -> a fixed, constant IP address on that same subnet (eg 192.168.1.254)
set the DHCP range small (eg 2-32)
router-1 will control all auto-ip assignments for both routers.

Personally, I add another tweak;

reserve ip addresses for all of my devices into the low-end of the dhcp range (say 2-10) and
let 'guests' take addresses above 10
This gives the opportunity to allow file/print sharing to known systems (2-10) and disallow for the guests.

Setup totally within the routers allow my laptop to travel and not be effected by these choices.
 

http://www.techspot.com/community/topics/router-to-work-as-a-wifi-on-the-lan-rather-from-a-wlan.207258/
Relevancy 18.49%

Hi there guys

I suddenly can't connect to wifi, but the problem is solved when I use the cable, and connect my laptop directly to modem. surprisingly I checked and it seems I can connect with my tablet to wifi spot! I used recovery and system restore point, but it didn't help.

I really appreciate your help.

oh and yes in wireless mode, I can see different wifis, but when I click to connect, it tries "connecting" but fails as well.
 

A:Investigate router, access point issues

Do you use MS Update in Autoupdate? looking to see if you are 'current'.

get make/model of your WiFI device (see device mgr),
find the version of the existing driver, then
see if you can find a newer version; install it if found.
 

http://www.techspot.com/community/topics/investigate-router-access-point-issues.207216/
Relevancy 19.35%

I had previously posted this on the Virus and Malware Removal forums but after thoroughly running scans etc the problem remained therefore I was advised to post this here I m using Win Been having problems every now and then but have been able to figure them out This one is not getting resolved easily however I am Connectivity Issues having a problem accessing the internet outside of the browser that I utilize Internet works fine in Waterfox and Chrome but not Connectivity Issues in IE Plus the programs installed on my computer don t seem to be able to access the internet either I e I cannot update Malwarebytes Dropbox can t seem to connect uTorrent doesn Connectivity Issues t seem to be able to get through Connectivity Issues either When I run the Windows Network Diagnostics I m getting an error quot Windows could not automatically detect this network s proxy settings quot I have tried all possible solutions mentioned on the Microsoft forums which seem to have worked for others but nothing has worked yet The only thing I seem to have discovered is that if I run safe mode with networking the problem isn t there I was able to update Malwarebytes with no issues I am connected via WiFi previously I had no issues they just popped up a couple of days ago I have tried the netsh commands often mentioned in relation to this automatically detect proxy settings in Internet Options is most certainly enabled and has always been System File Checker has not had any success Sorry for the long post So what should I do I am considering refreshing Win even though updating Office etc again will take a massive chunk out of my limited bandwidth so I would rather use that as a last resort I ve run scans with Windows Defender and Malwarebytes Anti-Malware and come up with zilch Suggestions It s definitely not a Virus and or Malware Does anyone know any potential solutions Thanks in advance nbsp

A:Connectivity Issues

Could you please provide computer information? Make and model of computer (or) if its custom built, please provide list of parts.
 

http://www.techspot.com/community/topics/connectivity-issues.207050/
Relevancy 22.36%

Hello all,

I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
 

A:How to change the Wifi password of an ADSL modem without a computer

Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
 

http://www.techspot.com/community/topics/how-to-change-the-wifi-password-of-an-adsl-modem-without-a-computer.207093/
Relevancy 18.06%

I m trying to configure Surround Sound but Realtek doesn t seem to be installing and it s configuring speakers driver 5.1 Realtek Trouble Sound; issues Surround to driving me nuts I have installed the driver provided by Gigabyte for my motherboard Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues and it s not doing anything It installs asks me to restart the PC but nothing is Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues there OS is Windows -bit Gigabyte says that my motherboard supports both and Surround Sound so I don t understand why I can t configure my speakers to run it only lets me use Stereo Device manager only shows High Definition Audio Device and Control Panel doesn t show Realtek at all Realtek Audio Manager doesn t appear either it s not in the system tray icons where I would usually find it Even searching for Realtek brings up nothing other than all the drivers I have downloaded to see if they would work Link to motherboard s Realtek driver as provided by Gigabyte http www gigabyte com products product-page aspx pid dl Link to motherboard s specification http www gigabyte com products product-page aspx pid sp Image showing my device manager gt sound http gyazo com ad b bd e ae a Any ideas as to what the problem is I can t seem to find anything audio related in BIOS either nbsp

http://www.techspot.com/community/topics/trouble-configuring-speakers-to-5-1-surround-sound-realtek-driver-issues.206888/
Relevancy 68.8%

Please help.. Can't connect to the wifi but using ethernet is working fine.. My phone could connect to the same wifi though
tried to backread some of the threads but didn't work on my laptop
 

A:Cannot "fully" connect to wifi but works fine on ethernet

Additional info. I am using Atheros AR5006EXS Wireless Network Adapter
and I did deleted the driver and it installed again automatically, but sadly it still doesn't work
 

http://www.techspot.com/community/topics/cannot-fully-connect-to-wifi-but-works-fine-on-ethernet.206650/
Relevancy 18.92%

My Gateway NV52 keyboard randomly stops typing o, p, l, ., and (.
All f a sudden it starts working as normal. Again while I am typing, the above mentioned letters stop working.

I checked for dirt stuck under the keys but nothing was there

the weirdest thing is, I tried a USB flexible keyboard instead and that was working properly for a while and that o, l, and . stopped working on that one as well.

I am confused why it's happening., and sick of filling the blanks of o, p. l with "on-screen keyboard". Please help me to figure this out.

Thanks guys, appreciated.
 

http://www.techspot.com/community/topics/gateway-nv-keyboard-issues.206519/
Relevancy 19.35%

I recently picked up some more ram. I switched out all my old ram 16gb ( 4x4gb sticks) and replaced it with 32gb (4x8gb sticks) my comp is now telling me I have 32gb but only 16gb is usable. I went into bios to see if I can change anything, but I can't change any ram settings whatsoever. I also noticed it's telling me I'm at 1333mhz when my new ram is 1866mhz. I'd like to have all 32gb usable and at 1866mhz speed. Any help would be appreciated. My mobo is asus p8h77 pro which says it can take 32gb at 2200mhz speed max.
 

A:Ram Issues

Which operating system do you have. It is possible the operating system is limited to 16GB. The sounds extremely familiar to the 32-bit operating system notifications when more than 4GB of memory was installed.

Windows XP is limited to 128GB.

Windows Vista Home Premium is limited to 16GB.
Windows Vista Business/Ultimate is limited to 128GB.

Windows 7 Home Premium is limited to 16GB.
Windows 7 Professional is limited to 192GB.

Windows 8 is limited to 128GB.
Windows 8 Professional is limited to 512GB.

Source - http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778(v=vs.85).aspx
 

http://www.techspot.com/community/topics/ram-issues.206448/
Relevancy 22.79%

Hello all,

I use an ADSL for Internet. The modem is wiry (not wireless). I plug the Ethernet cable from that modem into my laptop for accessing Internet. Everything until now is OK. But I want use the Internet on my cell phone as well. For it I need to use the wifi card of the laptop, this time, as a sender, for wifi Internet accessing for the cell phone!

1- Is it possible?
2- If yes, How to configure that card please?

Thanks.
 

A:Using laptop as a wireless modem for wifi uses

What kind of phone do you have? If you have wifi, I don't understand why you can't go into the wifi setting on your phone, find wifi & amongst other possible networks should be yours.
Or just get the manual for it , online if need be & go for it. Good luck.
 

http://www.techspot.com/community/topics/using-laptop-as-a-wireless-modem-for-wifi-uses.206334/
Relevancy 18.92%

I'm having trouble staying on line with telstra connection my internet keeps freezing and dropping in and out I have had trouble with my home line phone and have a bullion modem which this isn't the problem, the problem I believe lays with telstra as I've checked with my server and with downloads and updated my PC so what can I do next.
Thanks
June
 

A:Having problems with connection dropping in and out

June Lomas said:





what can I do next.Click to expand...

Call Telestra
 

http://www.techspot.com/community/topics/having-problems-with-connection-dropping-in-and-out.206048/
Relevancy 18.92%

SO a friend uses this site and told me to post my issue here since I ve exhausted my options apart from actually taking my rig into a quot pro quot to get it looked at so here I am I have a Gigabyte A-D P Mobo and an old Phenom II x CPU I decided hell why not spend some cash Driving me AMD insane New CPU Issues.... FX on a New AMD FX CPU Issues.... Driving me insane new AMD FX The computer turns on no output to video fans going lights on HDD spins but sounds like its spins some rotations slows spins more slows in an endless cycle No weird noises etc I ve built computers replaced parts etc in the past with little to no issues until this day Here is what I ve done to eliminate easy replies -BIOS version was F to begin with meaning it supported FX chips Flashed it to F e anyway optimized settings etc no change in behavior -Cleared CMOS started from scratch -- no change in behavior -Yes FX chips are supported by my Mobo checked this multiple times even before buying Website for this Mobo even tells me for FX chips to work flash to the newest BIOS to ensure compatibility -- no luck -Interchanged the Phenom II and the FX in multiple ways to ensure nothings been connect wrongly heatsink is messed up etc Phenom boots the computer up like a charm every time I ve been at this for hours to no avail I ve attached a picture of some system summaries in case they would prove useful as well Any help or insight is greatly appreciated thanks for reading nbsp

A:New AMD FX CPU Issues.... Driving me insane

You may have a bad CPU.I would run it to a local computer shop and let the check it.
 

http://www.techspot.com/community/topics/new-amd-fx-cpu-issues-driving-me-insane.205953/
Relevancy 22.79%

jobeard Hi jobeard In the beginning of the month you seemed to have solved this issue http www techspot com community topics internet-connection-through-ethernet-but-not-wifi You or someone else might be a great help for me as well since I have a similar issue At home I don t have access to wifi it says limited access although the internet is working fine by an ethernet cable at home In addition I do have access to wifi at work or in public places like a hotel I have already browsed the web but I still cannot figure it out An TCP wifi Limited but at home, other acces not places at IP Limited wifi acces at home, but not at other places reset did not work the drivers of my wifi adapter Limited wifi acces at home, but not at other places should be fine My system information - HP Elitebook - Windows Enterprise Edition bit - wifi router DrayTek Vigor AP this device acts as an access point that broadcasts wifi it is not the actual modem If you have any advice for me please let me know it is strange that I only have this wifi probem Is it maybe because there is an homegroup actually I don t know whether there is one Is it maybe because of the AV program I have McAffee but since it this the laptop from work I can t uninstall it I really don t know anymore I have included files with the output of the commands IPCONFIG ALL and ROUTE PRINT Thank you in advance nbsp

A:Limited wifi acces at home, but not at other places

Hello maarten747 ,

As far as I can see from the ipconfig output your laptop doesn't seem to obtain IP address.
You could try configuring one manually to test this theory. Something like: IP address 192.168.1.128, Subnet mask: 255.255.255.0, Gateway: 192.168.1.1, DNS1: 192.168.1.1, DNS2: 8.8.8.8 . Just keep in mind that the details listed here are just a guess as I'm not fully aware of the specifics of your home network and a static IP configuration for the wifi adapter is not a good idea actually, so once done testing change it back to obtain IP address automatically.

Also in what wireless operation mode is your DrayTek configured?
Do you have any other wireless devices that are connecting to the same DrayTek ?
When you connect your laptop with ethernet cable, is the ethernet cable connected to the same DrayTek or a different device?
 

http://www.techspot.com/community/topics/limited-wifi-acces-at-home-but-not-at-other-places.205603/
Relevancy 23.22%

Hello, I've had this problem for a good while and cant seem to find many answers. What happens is that I will be online and everything is fine untill my wife or daughter decide to get on to one of their devices that use the same wifi (ipad, ipod, phone) and everyone will get disconnected. After 2 or 3 minutes everyone will be able to connect again, for a few minutes at least, then we will get disconnected again. Rinse repeat.

Our router is a Belkin wireless G-plus mimo, Model# f509230-4
Modem is Westell model 6100, e90-610015-06
My wireless router in the bedroom connected to the PC is a linksys wusb6300 (blinks orange light at the time of dissconnect)

Any ideas on how we can stop constantly disconnecting each other would be greatly appreciated.

*just saw I posted this in the wrong place..ugh

Moderator note: Moved.
 

A:Disconnecting from internet when others use the wifi

Two suggestions:

First, make sure you have the latest firmware for that router

Second, after updating the firmware, access the router config and set the MTU to 1492.

This will stop packet fragmentation and all devices will then be protected from a packet reassembly overflow condition, failing all existing connections.
 

http://www.techspot.com/community/topics/disconnecting-from-internet-when-others-use-the-wifi.205777/
Relevancy 18.92%

I have an AMD Sapphire 6950. It is about 2 and one half years old. I have noticed in the past few months that when I am playing games it makes a resonating noise.

Even a simple game like League of Legends, a game with low demands, causes my card to make this noise.

Thoughts?

* I periodically clean my case so there is no dust build up.

* Here is the exact sound: If what this guy says is true this will be my last Sapphire card.
 

http://www.techspot.com/community/topics/anyone-else-have-issues-with-the-fans-on-sapphire-cards.205642/
Relevancy 22.79%

Hey, I was trying to setup an adhoc connection, but I'm faced with a dilemma.
I have internet via an ethernet cable, so I want to spread this wifi using my laptop's wifi connection.
However, whenever I connect the ethernet cable to my laptop and it's connected to the internet, the wifi light on my keyboard automatically turns red and the wifi router no longer works, hence I cannot create the adhoc connection.
After I remove the ethernet cable, the wifi light turns back on, and I'm able to create an adhoc network, but I won't have any internet to spread since, well, the ethernet cable is not plugged in...

I have an HP running on Windows 7.
Both ethernet and wifi adapters are fine.

How do I prevent my ethernet connection from shutting down my wifi router??

Thanks everyone!
 

A:Wifi router turning off automatically

Hmm; IMO, Windows is attempting to keep you out of hot water.

Your PC WiFi is not intended to act like an open hotspot. I you what 'guest' connects via wifi, you should manage that in the router setup (several have the option for guest vs lan users).

You were to create this kind of network:

router = = PC - - wif - - guests
The routing table needs special entries and in effect, you would be creating a dual-home environment (the guests could just as easily be a secondary ISP).
 

http://www.techspot.com/community/topics/wifi-router-turning-off-automatically.205478/
Relevancy 22.79%

I have a window's 8 laptop. It is about a year old. A few months ago it just suddenly stopped getting a strong wifi signal in my room. The wireless router is in the other room. I assumed that it was just our router, a belkin, and started using an ethernet cable rather then replace it. However, I am visiting my girlfriend and the router is in her room. I took my laptop to the other room and suddenly I only have one bar of connection and nothing will load, like it does at my house. Even sitting right next to the modem get 3 to 4 bar signal strength. I have no idea what to do. I have ran virus checks and malware checks. Nothing turned up. I tried checking to see if my wireless driver needed to be updated but it says that it's up to date and functioning properly, which clearly it isn't. My wireless driver is qualcomm atheros ar9485 802.11. Please help.
 

http://www.techspot.com/community/topics/my-laptop-wont-pick-up-a-strong-wifi-signal.205616/
Relevancy 19.35%

Hello,
Sony KDL-32R410b TV has only two hdmi inputs , one is HDMI MHL other is HDMI ARC.
I have a dvd player with a regular plug HDMI output.I do not own a receiver compatible with the ARC function.
My question is if I can connect my dvd player to ARC TV HDMI socket.In this case it is possible to damage the TV?
Thank you.
 

A:Hdmi connection

Background:
what the heck is MHL? Think of it as a technology that turns a common MicroUSB cable into an HDMI cable, but with a few special features. MHL stands for Mobile High-definition Link, and it's the brainchild of a group of companies?including Nokia, Samsung, Silicon Image, Sony and Toshiba?that wanted a specification that could be used to connect smart phones, tablets, and other devices to an HDTV.​
HDMI 1.4 introduces two features called ARC (audio return channel) and HEC (HDMI Ethernet channel).​
 

http://www.techspot.com/community/topics/hdmi-connection.205535/
Relevancy 49.02%

What the title says. I bought a TP-Link WDR4300 and installed it, and everything works perfectly on every device except for my laptop (Windows 8.1 Lenovo G480, running Windows Defender as AV). When connecting wirelessly, I get access to the router, but it shows "limited", and it doesn't even let me get into the setup page (192.168.0.1) and when I ping it, every packet is lost. Ethernet, meanwhile, works perfectly. I'd appreciate any suggestions on how to fix it.

I'd like to attach the ipconfig outputs but my command prompt is in spanish and some of the characters are missing in the .txt file, too. I don't know how to get the file in english.

@jobeard I saw one thread you solved in which you said to mention you so you could help. I'd really appreciate it. Thanks beforehand for any and all suggestions.
 

A:WiFi doesn't work, Ethernet does

Hi, You will always have to use the ethernet (Cat 5) cable to get into your router's software, at 192.168.0.1, all routers are set up like that for security reasons.
It's done that way so that no one can change your settings, passwords etc using a wireless connection, you must use the Cat 5 cable to make setup & security changes.
Did you get any setup software with the TP Link router?
If you get good internet access using Windows 8.1 using the ethernet cable, it
might point to possible wireless driver issues.
It might be worth downloading the latest driver for your WDR4300 from the TP-link website;
http://www.tp-link.es/support/download/?model=TL-WDR4300&version=V1
 

http://www.techspot.com/community/topics/wifi-doesnt-work-ethernet-does.205530/
Relevancy 18.49%

I bought a new Tenda Adsl2 Router
when I connect it to My pc or laptop it shows error
"Limited or no Connectivity"
I repair it by windows but still same problem.
I can't access 192.168.1.1
please help me to connect
 

A:Tenda Adsl2 Router W150D connection Problem

Is that a wired connection? Try this before attempting WiFi . . .
 

http://www.techspot.com/community/topics/tenda-adsl2-router-w150d-connection-problem.205287/
Relevancy 18.49%

Hello...I will start from the begining .

I bought the Acer V5 and tried booting it up...it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.

Petar
 

http://www.techspot.com/community/topics/acer-v5-booting-windows-installing-issues.205294/
Relevancy 30.1%

About a week ago, our cable internet connection went out. Before I had a chance to reboot the modem & router, my 11 year old decided to completely reset the router to factory settings! Ugh! This caused several issues: my home network is now gone, only a unsecured factory network is available. When I try to plug my laptop into the router via ethernet cord (in order to login to router and setup secure network) my computer will not recognize the router and won't connect to internet. I tried troubleshooting with my cable provider and they say it's in my computer (IP address will not reset) and he recommended I replace my network card. However, today when I brought my laptop to work, it will instantly recognize the wifi at work. So is it really my network card that is causing issues? Please help, I'm desperate and not tech too tech savvy!

Details:
Linksys wireless router
Charter cable modem
Hp pavillion dv6 laptop with Windows Vista OS
 

A:Laptop won't connect to home wifi but will connect to work wifi

Did you figure this out?
 

http://www.techspot.com/community/topics/laptop-wont-connect-to-home-wifi-but-will-connect-to-work-wifi.204978/
Relevancy 42.14%

Hi all,

I have a problem that I can't connect through wifi in windows vista home premium, but I can using LAN or using wifi in ubuntu. Please if can anyone help as it is urgent to me.
@jobeard
 

A:Can't connect through wifi but have a connection through LAN

see this thread and supply that data in your follow-up.
 

http://www.techspot.com/community/topics/cant-connect-through-wifi-but-have-a-connection-through-lan.205081/
Relevancy 22.79%

Hi I m using windows OS and Internet DSL Wifi but Router modem not through connected through using Reliance DSL broadband When I connect to internet directly through modem Internet is accessed but when I use D-Link DIR- Internet connected through DSL modem but not through Wifi Router router Internet connected through DSL modem but not through Wifi Router It shows you are offline and shows limited connectivity Ip configuration through wired connection is as below C Users Hiren s gt ipconfig Windows IP Configuration Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Wireless LAN adapter Wi-Fi Media State Media disconnected Connection-specific DNS Suffix local Ethernet adapter Ethernet Connection-specific DNS Suffix reliancebroadband co in Link-local IPv Address fe c e b a eb aa IPv Address Subnet Mask Default Gateway Tunnel adapter isatap reliancebroadband co in Media State Media disconnected Connection-specific DNS Suffix reliancebroadband co in Tunnel adapter TO Adapter Connection-specific DNS Suffix reliancebroadband co in IPv Address bed e d bed e d Default Gateway Tunnel adapter Local Area Connection Connection-specific DNS Suffix IPv Address ef fd cc c b Link-local IPv Address fe cc c b Default Gateway When I try to connect with wifi It shows limited connectivity and I can t open login page for ISP Ip config when connected through wifi is below C Users Hiren s gt ipconfig Windows IP Configuration Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Wireless LAN adapter Wi-Fi Media State Media disconnected Connection-specific DNS Suffix local Ethernet adapter Ethernet Connection-specific DNS Suffix reliancebroadband co in Link-local IPv Address fe c e b a eb aa IPv Address Subnet Mask Default Gateway Tunnel adapter isatap reliancebroadband co in Media State Media disconnected Connection-specific DNS Suffix reliancebroadband co in Tunnel adapter TO Adapter Connection-specific DNS Suffix reliancebroadband co in IPv Address bed e d bed e d Default Gateway Tunnel adapter Local Area Connection Connection-specific DNS Suffix IPv Address ef fd cc c b Link-local IPv Address fe cc c b Default Gateway C Users Hiren s gt nbsp

A:Internet connected through DSL modem but not through Wifi Router

I also tried friend's TP-Link router, with my Cable, Then it connects perfectly.
 

http://www.techspot.com/community/topics/internet-connected-through-dsl-modem-but-not-through-wifi-router.205006/
Relevancy 67.51%

I have spent the last days trying to get my WiFi to connect Connection Ethernet not through Internet but WiFi to the Internet and am ready to throw the computer and all its additional equipment out of the window Amongst a collection of other laptops and a desktop running different systems - Windows XP Vista Windows and Windows - I have an old Acer Aspire running Windows XP Pro SP I use it mainly for midi file work and as a host for Visual Studio which I keep for maintenance of some programs written many years ago but still in use by some of my friends and for which I require frequent searches on the Internet Just recently for no apparent reason the WiFi on this laptop suddenly stopped working I have been using an Edimax EW- Usg wireless adapter Internet Connection through Ethernet but not WiFi which has never given any trouble in the past to connect with my home network through a router modem supplied by my ISP Internet Connection through Ethernet but not WiFi Since every other computer iPhone iPad and Kindle connects to the same network and works perfectly I have to assume that there is no problem with that router Also the problem laptop connects perfectly via the ethernet cable It just won t work on WiFi alone I have checked my wireless connections setup including TCP IP and can find no problem devices in Device manager I have searched for solutions on the internet and tried everything I can find - I have scanned my hard disk with Panda Antivirus have downloaded and run MalwareBytes I have tried changing the router channel I have tried setting the ipconfig values Nothing makes any difference When I attach the wireless adapter there is usually a message telling me the connection has quot limited or no internet access quot At this point ipconfig all shows the default values for the configuration If I try repairing the connection I am told that the process cannot continue for one reason or another though on occasion it connects when I close the message box However the adapter still shows quot acquiring IP Address quot and hangs there Here ipconfig all shows the correct configuration In both situations the only ipaddress I can ping is the host PC - the problem one Every other IP whether in numerical form such as Internet Connection through Ethernet but not WiFi the router or alphabetical form such as google com returns either a quot timeout quot or a quot cannot find quot message and of course I cannot connect to the internet I have tried clearing the ipconfig I ve forgotten the command and followed it with ipconfig renew but that won t work I have repaired winsock using Microsoft s instructions and I have become quot war-weary quot trying to make sense of the whole thing I am trying not to have to re-install Windows XP and the associated updating of all programs so as a last resort I tried probably unsuccessfully to uninstall Edimax In the end after using Add and Remove to clear as much as possible I just deleted the complete folder from Program Files Then I installed the software for an old Belkin Wireless USB Adapter which I had lying around and tried it The outcome was exactly the same The Belkin software has one advantage however - it allows the user to opt to control the adapter through Windows though I still could not make it work I just don t know enough to solve this one Any ideas anyone BarrieC St ckM n nbsp

A:Internet Connection through Ethernet but not WiFi

Have you tried using another adapter? Or tried using the adapter on another computer? Just to rule out if the adapter is bad.
 

http://www.techspot.com/community/topics/internet-connection-through-ethernet-but-not-wifi.196216/
Relevancy 18.49%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 43%

I'm a new Plusnet customer and I cannot connect to the internet using wifi I just get a page saying the broadband is down. So I tried using an ethernet cable and after manually setting this up I can use the internet. I accidentally disconnected the cable yesterday but the internet didn't fault, it's now working wirelessly. I can connect to the wifi using my mobile and iPad but I cannot connect to the internet. A new router has been sent and the problem still persists, a bt engineer has also visited but cannot find a solution.

Can anybody please help me?
 

A:I can't connect to wifi but connect with an Ethernet cable works, even when it isn't plugged in

It gets confusing as to which device is being used so as a guideline
disable one or the other (wifi vs wired) and don't allow both to be active at the same time. Technically, which ever device gets an IP address from your router will become the gateway to your ISP - - ignoring the connectivity of the second device to access your router.

With a laptop, we just toggle the keyboard to enable/disable wifi and the wired is easy - - just pull the cable out.

create a desktop shortcut to \windows\system32\devmgmt.msc
to control the devices (needs admin access)
expand [+] network adapters and you'll see the list
mine are

Dell Wireless 1502 ....
Realtek PCIe FE Family Controller
Just right-click->disable and you can always right-click->enable

The png posted shows both are enabled and the wired has the gateway.
If the cable is disconnected, this is quite impossible.

SO, first control which device is to be used and then make the connection.
 

http://www.techspot.com/community/topics/i-cant-connect-to-wifi-but-connect-with-an-ethernet-cable-works-even-when-it-isnt-plugged-in.204891/
Relevancy 18.92%

Hello This is my very first post on this site I was looking for a good place for tech support and an My HDMI-DVI Monitor and with Connection Some Help Need this was recommend so now I m here Alright - here s the story A few months ago my neighbor moved They gave away some of their stuff one of which is a ViewSonic VG wm monitor which was given to me At first glance it didn t look like much Then I decided Need Some Help with My Monitor and an HDMI-DVI Connection to some research on it and it turns out that it s actually an HD monitor back from It even displays in full p After I found that out I wanted to try out my Wii U with it That s when I ran into a pretty big roadblock Turns out that even though it can do HD the oh so sensible people at ViewSonic decided to NOT incorporate an HDMI port Weird right Anyway it has two input ports - a DVI-D port and a VGA port I ve been using my laptop with the monitor through the VGA port and it displays at x Little did I know that VGA is quite archaic when Need Some Help with My Monitor and an HDMI-DVI Connection compared to DVI and HDMI I just went on vacation to the States I live in the Bahamas - and I was able to Need Some Help with My Monitor and an HDMI-DVI Connection pick up a really affordable yet well-reviewed DVI-HDMI male-to-male adapter cable made by ULTRA Since I couldn t bring my monitor with me I had to wait to get all the way back home here in the Bahamas Why oh why As soon as I got home I plugged in the cable to the back of the monitor the DVI end and into my Wii U the HDMI end I powered on the monitor and WALLA ----- oh wait quot No Signal quot I ve been trying for about - hours now and that s all I can get from it I ve tried all I can I even plugged the HDMI end into my set-top box and believe it or not IT WORKED I took it out and tried it again but once again quot No Signal quot That s the only time it s worked I m not sure what the case is I ve done all I can I tried it on my laptop it s the only one in the house with an HDMI port and this monitor is the only one in the house with a DVI port The monitor has age on it I can t access the OSD and there are a few bright spots but it still looks and works good I just really wanted to try DVI since it s apparently in the same ballpark as HDMI when it comes down to display quality So does anyone have any ideas I can t return the cable to try for a different one just in case IT S the problem - and to buy one here in my country is a little more expensive TL DR - Monitor won t accept DVI signal from HDMI to DVI adapter cable but accepts VGA just fine Any tips to attempt a fix nbsp

A:Need Some Help with My Monitor and an HDMI-DVI Connection

Not completely sure since I have a laptop (I don't use an external monitor), but don't you have to switch the input of the monitor like a TV?
 

http://www.techspot.com/community/topics/need-some-help-with-my-monitor-and-an-hdmi-dvi-connection.204858/
Relevancy 18.92%

So I realize that this is my computer telling me that it is not getting a connection to the internet So here is a basic diagram of my setup ISP---- gt Cable Modem----- gt New Splitter---------- gt Asus wifi router working --------- gt Desktop IP also connected to wifi My ISP is Charter Com via a Cable Modem From there I go into a TRENDnet ethernet switch splitter From there I have cable that goes to my desktop one cable to goes Area Local Connection 169.254.xxx.xxx to the upper floor to the wifi router Asus RT-N U The router is working fine and I am currently connected to it I have replaced the TRENDnet Switch every ethernet cable except to Asus wifi router This is where it gets stupid I can disconnect the TRENDnet switch and plug in my Desktop with the IP and it works I have researched this topic via forums for the past month and a half and now after fresh installing windows would like to try and get some input of what other might think is going on I am out of options I Local Area Connection 169.254.xxx.xxx had this setup for quite some time with wired and wifi Local Area Connection 169.254.xxx.xxx but just all of a sudden about - months ago after moving my desk and plugging it all in again it stopped working Here is a text format of Ipconfig of my LAC Configuration for interface quot Local Area Connection quot DHCP enabled Yes IP Address xxx xxx Subnet Prefix xx mask InterfaceMetric DNS servers configured through DHCP None Register with which suffix Primary only WINS servers configured through DHCP None As I said I am now running a fresh install of windows with no Bonjour program on it I have released renewed and about other CMD commands that I could think of The internet options for this adapter are set to obtain automatically I have ran about every malware program I can think of So any help would be greatly appreciated nbsp

A:Local Area Connection 169.254.xxx.xxx

Hmm why the splitter BEFORE the router - - that's not the correct way to add a second router


Code:
isp==primary router --- existing PC
to add a second router:

Code:
isp==primary router --- existing PC
|
+--- new router
 

http://www.techspot.com/community/topics/local-area-connection-169-254-xxx-xxx.203909/
Relevancy 18.49%

I am running Windows 8.1. After restarts, the laptop screen would be blank, yet the computer would load. If I hooked up a 2nd monitor, it would show the desktop on that screen but laptop screen blank.

Now when I try to type on that computer (I'm currently on a different computer) the typing of the keys is all off (none of the letters actually type what they are supposed to and some open up random windows and command prompts)

I am wondering if this is a virus. Currently running Malwarebytes. I did a system restore earlier and the problem wasn't solved.
 

A:Blank Screen error and typing issues

Could be a virus, but could also mean the motherboard is faulty. If still in warranty, RTM.

Does the laptop have a bootable CD reader? If so, then download and make a bootdisk of a small linux (e.g. puppy linux). Booting off that will virtually prove if the motherboard is faulty or not.
 

http://www.techspot.com/community/topics/blank-screen-error-and-typing-issues.204596/
Relevancy 22.79%

I am using Tenda wifi router. It has a problem, it is that it need configuration every time when I start my laptop or connecting with any mobile device. What is the problem with that?
 

A:Tenda wifi router need configuration every time

The Tenda wifi router's internal battery may be dead
 

http://www.techspot.com/community/topics/tenda-wifi-router-need-configuration-every-time.204507/
Relevancy 23.22%

Hi everyone I m looking for a new wifi router I m looking for simultaneous ghz ghz My house is decently sized so good range is necessary but nothing exceptionally big larger than average American house At most about concurrent sessions Don t really care for custom firmware Don t really care for features just need to be able to port forward which I m confident any router can do Won t be doing anything outside of regular home use It needs to have at least one ethernet port Want it to be fast of course So I don t know if this matters or not but it will be placed in the middle floor corner of a Suggest Router new Wifi the house so if it d be possible to direct the Suggest a new Wifi Router signal both up and down that s good since usually the radiation pattern is mostly upward outward I Suggest a new Wifi Router don t think any exist that let you point the signal directionally degrees but that s ideal Suggest a new Wifi Router Modem is Motorola SURFboard SB I m not looking to spend a whole bunch and as you can see I don t think there are a lot of specific features that I need so don t throw me the most expensive ones possible I m guessing I can get everything I asked for for or less Thanks for reading willing to order online in the US or drive to the nearest best buy if the price is the same as online nbsp

A:Suggest a new Wifi Router

I have the Netgear N600 and I love it! It is a great all round router. It goes for $75 on Amazon and the Gigabit version goes for $5 more. I would avoid Belkin routers since I have heard bad things about them. The Linksys N900 router also seems to be a possibility.

I would highly recommend the Netgear router (N600) because it is a good value for the performance. Keep in mind, when looking for a router, you should probably ignore the mbps ratings since your connection is probably not realistically close to that level. Look at warranties, reviews, and reliability. We have a ton of devices connected to the router at once (at least 10) and it works fine. It makes me lag a bit when gaming from time to time but that isn't usually the case.
 

http://www.techspot.com/community/topics/suggest-a-new-wifi-router.204240/
Relevancy 23.22%

My laptop keeps saying default gateway not accessible even though it has all the routers information
 

A:Laptop won't connect to wifi

Give a little more information. Such as what OS. Make and model so forth. This way someone can help you.
 

http://www.techspot.com/community/topics/laptop-wont-connect-to-wifi.204349/
Relevancy 23.65%
Q: No WiFi

Ok my issue is that I has wifi working fine on all my devises and then I wake up this morning and I cant get wifi on any?? I can plug the ether cord straight in to my PC and get internet but as far as my phone or pads.. nothing no netflix nothing???
 

A:No WiFi

Unplug router for 10 seconds, plug back in.

If that doesn't fix it, you'll have to give some more information so we can tell you how to get into the settings of your router while wired in (likely //192.168.1.1 but some routers have slightly different default IPs).
 

http://www.techspot.com/community/topics/no-wifi.204215/
Relevancy 19.35%

Hi there, my name in Mark, Over the past few days my whole internet randomly cuts off and goes back on, as if its being hit offline. I have ran through the forums and have checkout out the firewall and even done multiple virus scans and everything is coming up clear. I have a Virgin Media Superhub so its a combination modem and router. I have messed around with a few settings on the router itself. Im really struggling as I contacted my internet provider and they said they have no problem on their end. They also reset my router on a high frequency but I am still having the same issue. After having looked over multiple forums and videos and browsing through google. This issue will not resolve. It seems to occur more often when I try to run online gaming through my xbox one but it has happened a few times when the only thing that is on is my pc. I have a gaming pc and im not sure what other information you guys need. Any help would be amazing and to kick whatevers butt is annoying my internet.!
 

A:Internet Issues

Log into the router and find the setting MTU. It usually defaults to 1500 but that allows something called packet fragmentation. Change it to 1492 and it will stop that.
 

http://www.techspot.com/community/topics/internet-issues.204147/
Relevancy 23.65%

I have a bt hub my wifi works great in the bungalow but not in the garden I have looked at several wifi boosters but don't know which one to go for HELP PLEASE
 

A:Wifi boosting

What wi-fi router are you using? On some, you can change the transmission power setting.

Another option, if you don't mind tinkering, is get a wi-fi router that's compatible w/ custom firmware like dd-wrt. Flash the router w/ the custom firmware and configure it as a repeater bridge. I did this at my parents' house years ago. Bought a refurbished Linksys WRT54G2, after flashing and reconfiguring the router, I was able to extend the range.

Tomato is another customer firmware. Haven't used it so can't comment on the pros and cons.
 

http://www.techspot.com/community/topics/wifi-boosting.204078/
Relevancy 19.35%

So within that past month my mobile users have started having issues with our VPN. One day they can connect with no problems and then the next day they receive error 800 or error 807. There are several weird things going on. For one it doesn't just happen to certain users. The problem effects one user one day and then another user the next day. Also some can connect while others cannot. And in one case we had two users co-located at the same offsite place and neither could connect. One had error 800 and the other had 807.

Also, the users can ping the vpn server but as soon as they receive the error 800 or 807 they can no longer ping it. I tried restarting the vpn server for a user that received one of those errrors and could no longer ping the server. Once the server rebooted the user was able to ping but when he tried to connect he got the error and then was no longer able to ping it. Does anyone have any ideas for me?

The vpn server is on Server 2008 and my clients run Windows 7.
 

http://www.techspot.com/community/topics/vpn-issues.204032/
Relevancy 18.92%

So a bit of background I have been having several issues with Issues x505-q898 Qosmio with my laptop The first has been a severe overheating issue at times though I was able to help solve the problem by using a laptop cooling pad for a time Eventually though even that wasn t helping and neither was trying to clean out the heat sinks using compressed air I refuse to blow the dust back into the laptop Being the laptop was already out of warranty I disassembled the laptop down to the motherboard which I have to say thanks Toshiba for refusing to release any of Issues with Qosmio x505-q898 your service manuals I opened up the heat sinks thoroughly cleaned out the heat sinks reapplied thermal paste to both the GPU and CPU and reassembled the laptop Using Core Temp and a GPU monitor my temps are well within normal operating range However I am still having issues Now when I start my laptop up if my battery is plugged in and the AC adapter is plugged in the computer will shut down without any notice within a few minutes The lights on the LEDs on the front turn off even though its plugged in and will not restart without removing both the battery and power being removed hitting the power button a couple times and plugging it back in Now if I don t have my battery plugged in it lasts a lot longer but still shuts off periodically for no reason and has to be unplugged Issues with Qosmio x505-q898 and hit the power etc However when I left my computer plugged in and running this morning no battery it sat there for a couple hours with no problem I moved it onto my lap and it shut off I m curious to what some possible solutions to this could be It s possible I reassembled it wrong though everything seems to be working all the buttons etc but it seems like something is causing the system to crash and lock out I don t know if its software or hardware related I m considering reinstalling Windows to see if that helps but I wanted to check in first to see if anyone else has a solution without going that far nbsp

A:Issues with Qosmio x505-q898

The motherboard is probably fried from the previous severe over-heating... Did you apply just a very small amount of thermal paste to the heat-sinks? Applying too much can act as a insulator. Were there any thermal pads used? if so, replacing them with paste is not a good move
 

http://www.techspot.com/community/topics/issues-with-qosmio-x505-q898.203896/
Relevancy 18.92%

So I now realized that disabling the Teredo Tunneling service/adapter in Device Manager might have been a bad mistake. Had some scary moments where I was not sure if my computer wasn't accepting the new connection, or my wireless USB adapter was dying.

I enabled 6to4 I believe, and IPv6 through a step I found here:
http://answers.microsoft.com/en-us/...nterface/754c8f29-3a87-4e77-babd-a69c8910e17e

Though I'm noticing that the adapter for the Teredo Tunneling Service still says it won't start. (Error 10) and whenever I try to update the drivers it says they are up to date.

So I'm not sure if checking my registry (my current step I am on) will fix the Tunneling service and help stabilize my PCs connection, or if it's going to patch one thing but leave this service dangling by a thread not doing anything.

Any advice and maintenance tips would be very appreciated! Still trying to get this working so I can take some online IT courses.
 

A:IPv6, 6to4, and Other Networking Issues

Update: I followed the rest of the steps and updated the registry to allow IPv6. From there things seemed more stable but when I check the network status after the net going down it says IPv6 doesn't connect. When I tried troubleshooting (the auto troubleshooting function of Win7) I got a BSOD:
IRQL_NOT_LESS_OR_EQUAL.

the other photo is blurry, but later I can try and upload a photo via photobucket for anyone to check out. As per a google search on what the BSOD is, I found it stopped 4-5 services and shut down. (really long hex codes.)

one sort of looks like: 0xFFFFF0200220550F, but the quality isn't that great, and I have no idea if that's accurate.

I'll check my dump file I copy-pasted and post later. Any advice and help would be appreciated!
 

http://www.techspot.com/community/topics/ipv6-6to4-and-other-networking-issues.203936/