Windows Support Forum

acer aspire one with HP printer

Q: acer aspire one with HP printer

i just got an HP printer yesterday. i dont have a cd rom drive on my computer. is there any site i can go to download what i need to off the disk? or am i going to have to buy a cd rom drive as well? thanks

Relevancy 100%
Preferred Solution: acer aspire one with HP printer

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 21.07%

I have a group of computers in a small office without a server that are connected and share via homegroup. When I added a new laptop with win 8.1 to the homegroup, I couldn't ever access the shared printer which is attached to the win 7 desktop. I deleted and recreated the homegroup multiple times from different computers and nothing seemed to change the situation. I deleted the homegroup completely and just tried to share the printer separately connecting via computer share name and still not good. Now if the win 8.1 computer can recognize the printer, none of the win 7 computers can print to it and vice versa. I need them all to be able to share the printer at the same time and share 2 folders between all of them. How can I accomplish this besides down grading the 8.1 to win 7 and installing win 7 on it. Thanks for the assistance
 

A:Sharing printer and files between win 7 and win 8.1 computers

If the printer has Ethernet support, connect it to the router and then use Add Printer as a Network printer on every PC (ie not directly connected to any PC) and at least that will solve one issue. Remember to get the correct print driver for each system; Win/7 vs Win/8.

I'll surf for the sharing issue and post back ...
 

http://www.techspot.com/community/topics/sharing-printer-and-files-between-win-7-and-win-8-1-computers.216549/
Relevancy 22.79%

Acer has added a new monitor to their gaming-focused lineup, the amazing looking XR341CK. This 34-inch 21:9 UltraWide QHD (3440 x 1440 pixels @ 75Hz) IPS monitor comes with a curved display in a zero frame design, which Acer says...

Read more
 

A:Acer reveals 34-inch curved QHD FreeSync and G-Sync monitors

This type of monitor is the best way to channel the power of your GTX 980 Ti, which inherited its anti-aliasing power from the many generations before it, as opposed to having it choke on the 4K pixel-mania in chase for almost the same effect, at the expense of the dropped FPS.
 

http://www.techspot.com/community/topics/acer-reveals-34-inch-curved-qhd-freesync-and-g-sync-monitors.215946/
Relevancy 21.5%

I have HP LJ p4014. I was wondering if there would be a difference between using a maintenance kit thats 220v on a 110v printer. Any help would be good.
 

A:Printer 110v vs. 220 v.

What does that maintenance kit do? Because you can easily go into HP software and order your printer to clean printheads or align them.
 

http://www.techspot.com/community/topics/printer-110v-vs-220-v.191819/
Relevancy 48.59%

My dvd rom is not working wont take cd and makes a noise, will it be worth replacing it or should I just get an external dvd/ cd
 

A:DVD/CD for an Acer Aspire Z5600

I also have a Dell Inspiration 4700 that the on and off switch went bad. It has power therefore I dont think has to do with the power supply. I need some answers please on this two postings. Thank you
 

http://www.techspot.com/community/topics/dvd-cd-for-an-acer-aspire-z5600.213105/
Relevancy 23.65%

I have a Acer Aspire X3400 And I would really likle to upgrade it to 3.0 or 4.0, I also want to raise the FPS from 12 ( ikr, it's crap ) to a standard gaming pc

Please tell me

1. Motherboard size
2. What parts you would advise me to get
3. Where can I find some that will fit

thanks.
 

http://www.techspot.com/community/topics/acer-x3400-upgrade.212670/
Relevancy 21.07%

Before I start I want you to know that the printer works When I plugged it into my computer it was automatically recognized drivers were downloaded from windows update and I was printing in less than a minute When I plunged it with OfficeJet HP printer Troubles 5610 into my friends laptop the actual owner the issues begin The troubled computer is HP laptop with Win x When I plugged it in via same USB cable I used with mine it was automatically recognized drivers were downloaded from windows update but I was not able to print anything I went to HP website and downloaded the entire software package and still nothing When I am in the devices and printers window the computer recognizes when the printer is plugged in and and when it is not But I can not even print a test page The funny thing is that I can scan from the printer to Troubles with HP OfficeJet 5610 printer the laptop but I can not print to it There are other printers connected to the laptop both network and USB and they work just fine Here is Troubles with HP OfficeJet 5610 printer what I did so far I tried Troubles with HP OfficeJet 5610 printer the automatically installed drivers I downloaded the HP recommended drivers I have restarted the spooler There is nothing stuck in the job list I have manually removed HP drivers and started again I have used the HP driver removal tool maximum level and started again I have set the printer to print directly to printer and bypass the spooler And I still can not print but I can scan Any thoughts anyone nbsp

A:Troubles with HP OfficeJet 5610 printer

How much Ram in laptop? Available space on HDD?
 

http://www.techspot.com/community/topics/troubles-with-hp-officejet-5610-printer.186225/
Relevancy 48.16%

hi.
My acer battery was getting bad and my computer suggested I change it. Now with my charger plugged in(with or without battery) my laptop will power down after 15-20mins. I have ordered a new battery and will try it but I would have thought my laptop should run fine without one plugged in? Any idea the cause of this? My laptop would run for several hours on safe mode but even now safe mode is being powered down
 

http://www.techspot.com/community/topics/acer-aspire-5334-powering-off.211242/
Relevancy 23.65%

HI,

I am looking to upgrade the GPU on this PC but I am unsure if the PSU will be able to support it. I am not looking to install a high end GPU only a low end card such as ASUS 2 GB AMD Radeon R7 240-2GD3-L PCIe. I am aware that the PSU has a max of 220w but I am unsure of the current load. Based on the basic system with no current upgrades are you able to advise me on this?

Basic specs are:

Windows 7 64 Bit
Intel Core i3 2120
6GB Ram
Intel HD Integrated Graphics
2 HD (1 SATA 1GB)
1 Optical Drive
Realtek HD Audio

If necessary I am able to disconnect 1 HD and the optical drive as they are not necessary, also to disable the onboard graphics if possible if this will help.
 

A:GPU Upgrade Acer X3995?

Here is a related topic

http://community.acer.com/t5/2014-Archives/x3995-Video-card-upgrade/td-p/199945

edit:
http://ubuntuforums.org/showthread.php?t=2053938




Indeed, I thought initially that it was a EFI problem but the problem is simply a graphic driver issue with the graphic card GeForce 605.Click to expand...

I'm not positive a card can work in your machine and can not give suggestions.
 

http://www.techspot.com/community/topics/gpu-upgrade-acer-x3995.210979/
Relevancy 22.79%

Acer announced two new gaming-grade 27-inch monitors at the Consumer Electronics Show last month. The XB270HU garnered the most media attention thanks to its IPS panel and Nvidia G-Sync technology. What Acer neglected to mention at the time, however, was...

Read more
 

A:Acer's 27-inch XG270HU display will ship with FreeSync support

Those bezels are awesome! I wonder how much it'll go for though...
 

http://www.techspot.com/community/topics/acers-27-inch-xg270hu-display-will-ship-with-freesync-support.208917/
Relevancy 47.3%

Hey!
I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?

These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Aspire V5-V561PG-9683
Model number: Z5WV2

If you need more info let me know, I still have everything for it.
 

A:Acer Aspire issues; Games no longer work

If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
 

http://www.techspot.com/community/topics/acer-aspire-issues-games-no-longer-work.208471/
Relevancy 21.07%

Hopefully someone can answer this as im baffle, my computer will turn on and of with no problem as ling my printer is plug in but if printer cable unplug it won't turn on but if printer cable in plug in it will turn on but while the comptuer turn on and I unplug the printer cable it will shut down nothin making since but as long the printer is unplug it will not start or boot blank screen but printer plug in I can get to the boot or cmos screen please help Thanks

PS it a Dell PP17L Latitude
 

http://www.techspot.com/community/topics/pc-wont-turn-on-if-printer-not-plug-in.208502/
Relevancy 21.07%

Hello. I speak English a little. Therefore, I can do a lot of errors in my sentence but I hope for understanding.
Please, help me fint out the schematic diagram for the printer Samsung ML-216*.. Or who has it?
Thank you so much and have a nice day!
 

A:Looking for the schematic diagram for the printer Samsung ML-216*

dnshulga said:





Hello. I speak English a little. Therefore, I can do a lot of errors in my sentence but I hope for understanding.
Please, help me fint out the schematic diagram for the printer Samsung ML-216*.. Or who has it?
Thank you so much and have a nice day!Click to expand...

No guarantee, but see if this will help http://www.manualslib.com/manual/201828/Samsung-Ml-2165.html?page=3#manual
 

http://www.techspot.com/community/topics/looking-for-the-schematic-diagram-for-the-printer-samsung-ml-216.208342/
Relevancy 21.07%

Hi,

Can someone please recommend me a colour laser printer for home use? Resolution should be at least 1200 x 1200 dpi. The option to print both sides of the paper would be nice. Multiple paper trays not necessary, nor anything else that will add unnecessary bulk to its size. There should also be connection for Ethernet and USB. Preferable that it uses separate toner cartridges for the different colours, so if one colour runs out then only that colour needs changing rather than the whole lot.

Thanks.
 

A:Recommend me a laser colour printer please

You realize these are very expensive to both purchase and on a cost/page.
 

http://www.techspot.com/community/topics/recommend-me-a-laser-colour-printer-please.207641/
Relevancy 24.08%

If your Acer M does not start up Don t fret I found a simple solution With the computer turned off Remove side panel Reach M460 Acer inside and hold Acer M460 exhaust fan so it can not move While holding fan Push the on button on the front panel Listen for the quot beep quot sound After you hear the quot Beep quot release the fan The fan will start up after a second or two P S Do not let fan move until you hear the quot beep quot first Many suites on the web say it is the quot capacitors quot NOT TRUE I had this year for over a year When I turned off my Acer M Sometimes it would not start up I got so and I cut the wires inside the computer Purchased another used M it did the same thing Figuring I needed new caps I purchased a set of the two biggest caps Then I needed a soldering gun Then I needed to desolder the caps already on the board Then I purchased a rework station So far I have only used the air gun Starting yesterday This procedure works for me It will work for you as well nbsp

http://www.techspot.com/community/topics/acer-m460.207931/
Relevancy 21.07%

This ink cartridge http://www.epson.com/cgi-bin/Store/jsp/Product.do?BV_UseBVCookie=yes&sku=T048120[1]

Is labelled as "T048120-S" on some online stores... others it's labeled just as "T048120"

What does the "-S" mean? single cartidge?
 

A:Question about Epson printer ink model #

Probably means standard capacity.
 

http://www.techspot.com/community/topics/question-about-epson-printer-ink-model.207580/
Relevancy 47.73%

1 4gb samsung pc3-12800 1.35 v
1 4gb nanya pc3-10600 1.5 v

The timings are listed different on the stick.
HWInfo reports that at 666.7 both are 9-9-9-24
Crucial will sell me all 1.35 v memory as upgrades and the 4830T-6678 Timeline X came with the [email protected]
The laptop boots and runs with both sticks installed

Any thoughts on this?

Thanks
 

A:Mixing memory in Acer Aspire laptop

Is the laptop reporting 8GB of memory installed? If it is, you should be okay
 

http://www.techspot.com/community/topics/mixing-memory-in-acer-aspire-laptop.207496/
Relevancy 23.22%

Hello Yesterday I got a virus on an Acer Extensa laptop Said virus was turning on a fake antivirus whenever I opened a file which wanted me to pay a price for a quot cleanup quot I wasn t able to Acer Extensa 5235 booting problem turn anything on Luckily I managed to turn it off through msconfig and delete the virus files Right now however the laptop won t even turn on The Acer Extensa 5235 problem booting quot Acer quot screen goes on the flickers a few times in the upper left corner and the laptop resets I won t even get to a safe mode The notebook had minimal differences from the factory preset had Win Acer Extensa 5235 problem booting and worked until yesterday I have a OEM Win XP home CD at my disposal at the moment I have already tried Booting through BartPe and an iso image of Windows XP on an USB flashdisk To no avail I get to the BartPe layout but the BartPe file explorer shows no disks available Boot through the disk itself At first it didn t load with the error quot STOP X B xf d Xc X X quot which I was able to circumvent by transferring from a SCSI mode to IDE mode in BIOS When I installed Win XP however I had an error concerning a few uncopiable files described for example here - http forums penny-arcade com discussion cant-install-xp-from-any-disk-to-any-disk I skipped everything and the PC now resides in a quot minimal quot Win Xp preset With the former Win configuration of course absent I think I d be able to fix this if I found the MSCONFIG settings for the Windows I used before and which I mistakenly modified I probably turned off something that now blocks the system from starting Is it possible to do so through the new Windows Xp installation The former Win folder is untouched Win Xp runs from another folder Thank you very much for all help nbsp

A:Acer Extensa 5235 problem booting

I had to look up BartPE to see what it was but I think it's unlikely to save the day in your situation.

Assuming that your priority is to get Windows 7 back I'd first check that you have the Microsoft authorisation code for your copy. If it was pre-installed on the laptop there will be a hidden restore partition and you could try holding down the Alt key while tapping F10 to access it. Failing that option I'd download a Windows 7 SP1 ISO, burn it to disc, reinstall the OS and hope that there are no serious driver problems. Both options mean that everything you have installed and saved will be lost unless you have already made backups.
 

http://www.techspot.com/community/topics/acer-extensa-5235-problem-booting.207441/
Relevancy 23.22%

My Acer Aspire shuts down loses power - seconds after powering on It started when I was playing a Acer laptop after seconds down shuts video game and the laptop suddenly shut down I thought it was overheating so I let it cool down About an hour later I Acer laptop shuts down after seconds turned it on and it boot normally but min later the laptop shut down again Next time I tried it turned off minutes then seconds later In those s after pressing the power button no errors or beeps occur just the Acer logo screen I even get past Acer logo sometimes or go to Bios password prompt if i press F just before laptop powers off Acer laptop shuts down after seconds This all happened in the course of a few hours laptop was working fine beforehand no overheating think so cause games lagged when laptop was overheating previously If I turn it on again just after it powered off the laptop shuts down in seconds as opposed to seconds if i leave it alone for a while Also according to task manager CPU and RAM usage is normal when shut down happens Tried Cleaning out the fan and the heat sink wasn t that much dust Fan works Applying new silver thermal grease to CPU and GPU after removing the old one Powering on with only one RAM stick then only the other black screen when I take out both Powering on without Wifi card Powering on without the battery only on AC power Then only with the battery in Powering on without Hard Drive Powering on while putting pressure to the middle of the keyboard read that this might pop the CMOS battery to it s slot if that s the problem Pressing the power button for min There are a lot of people with Acer Aspire who have powering on and off in endless loop problem Supposedly GPU reflow helps I don t think my problem is the same though because my laptop shuts down and doesn t restart Also my screen is working This is the only computer I have Any help or tips would be greatly appreciated nbsp

A:Acer laptop shuts down after seconds

Sounds bad.

Are you able to run Memtest for any length of period? Search for YUMI Multiboot. Download that, install it to a spare USB stick. Download memtest from yumi program. Boot off of stick and run memtest.

If not get a new motherboard/cpu off ebay.
 

http://www.techspot.com/community/topics/acer-laptop-shuts-down-after-seconds.172489/
Relevancy 23.22%

Hello...I will start from the begining .

I bought the Acer V5 and tried booting it up...it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.

Petar
 

http://www.techspot.com/community/topics/acer-v5-booting-windows-installing-issues.205294/
Relevancy 48.16%

Hey guys, I'm pretty much a noob at this.
Long story short... My acer aspire 5552 will not stay on. When I turn it on I have to press on a certain area if not multiple areas. Before I had opened it and cleaned out the fan it use to overheat like crazy it used to hit about 90 degrees I'm wondering if that has ruined something?

Please help!
Thanks in advance
 

A:Acer Aspire 5552 won't stay on

First of all. Why do you have to hit certain area or for that matter. Multiple areas. It may still be running to hot. Or something was damage when you put in back togather. If it is running to hot . It may need new thermal pads.
 

http://www.techspot.com/community/topics/acer-aspire-5552-wont-stay-on.203706/
Relevancy 46.44%

Hey everyone I own the Acer Aspire G- and I ve had it for a little over two years now One 5552G-7641 Aspire with Temperatures Acer Extremely High of the main problems I have with it is its temperature Right now when all I have open Extremely High Temperatures with Acer Aspire 5552G-7641 is Firefox and iTunes the temperature according to Speedfan is as follows HD C Temp C GPU C Core C I have the rear of my laptop suspended about cm in the air by putting two bottle caps in the rear corners This is an attempt to promote better cooling When I play video games it overheats to the point that the laptop shuts off automatically I understand that the majority of overheating issues is not cleaning enough And indeed I have never cleaned my laptop before However opening the laptop or bringing it to a tech-guy is not really an option at the moment I have read on many forums that using compressed air is efficient but I have also read that it can be extremely dangerous on laptops because of water moisture Also they seem to only pertain to desktops With that said I am here to ask for advice as to what to do with this thing The only ventilation hole is on the left of the laptop and takes up about of the side If any additional information is needed I will gladly provide it Thank you nbsp

A:Extremely High Temperatures with Acer Aspire 5552G-7641

Speedfan is not accurate 95% of the time. Tell me the readings using Realtemp: http://www.techpowerup.com/realtemp/.
 

http://www.techspot.com/community/topics/extremely-high-temperatures-with-acer-aspire-5552g-7641.192887/
Relevancy 17.2%

I am in an office building with 40 or so tenants. The entire building is wired to one central network (let's call it main network) controlled by SonicWall where each office has one live network drop. The main network is set up in such a way that tenants can plug in their own switches and routers if they want more network connected devices in their office. The office building has a network printer connected to main network where tenants can print to it. However, when tenants have their own routers in their office you cannot really connect to the network printer that is connected to main network. Is there something I can port, bridge or set-up where they can print to it?
 

A:Printing to network printer on another network

I think that as long as the tenant's router is connected to the main network they should still be able to access that printer provided that the WAN IP address of their routers is within the IP range of the main network where the Network printer is attached.
 

http://www.techspot.com/community/topics/printing-to-network-printer-on-another-network.203071/
Relevancy 46.44%

Just ruled out malware in other section of this forum. Laptop's integrated keyboard suffers intermittent lock-ups for no apparent reason (sometimes works, sometimes doesn't, right now, doesn't). Touchpad seems deactivated (tried FN + F7 in case of accidental disable, but that's not the case), every option related to touchpad are grayed out in 'mouse' menu (config panel). Before malware check-up,tried system restore to last week, all problems were still there, so I reverted back. I have to use visual keyboard to type. Have to work with external mouse because touchpad doesn't work. Tried reinstalling touchpad drivers from Acer website, and didn't work. Computer worked perfect a few days ago.
 

A:Acer aspire 5749-6823 keyboard intermittent, touchpad a.w.o.l.

Sounds like you may have some system files corrupt. This can occur after a lot of spyware. Some times just removing it dose not correct what it has already messed up. Your best maybe to back up your personal stuff. Then do a factory reinstall.
 

http://www.techspot.com/community/topics/acer-aspire-5749-6823-keyboard-intermittent-touchpad-a-w-o-l.202904/
Relevancy 21.07%

As the title says I'm trying to connect my HP3050 printer to my computer wirelessly. Problem is I get this:


The story goes that in the past week or so we swapped to a different internet provider and have swapped out the old modem/router for one that the new company has provided.
Prior to this no problems at all.

How do I counter this, I.e. remove the problem of what appears to be the availability of two routers, the new and the old?

Thanks,
Tom.
 

http://www.techspot.com/community/topics/unable-to-connect-my-hp3050-printer-wirelessly.202822/
Relevancy 21.07%

My dad was putting some paper into his printer and had apparently put the paper in too far. When he tried to print something it jammed up and the printer had abruptly shut off. I have tried leaving it unplugged for a while and plugging it back in however, the printer WILL NOT turn back on at all.
 

http://www.techspot.com/community/topics/dell-3510-printer-issue.202348/
Relevancy 48.16%

After formating my PC I realised that the taskbar is unable to appear because the screen resolution does not fit the desktop. how do I set the specific screen resolution for acer aspire one d257. I have tried using the registry tweak for higher screen resolution but it does not work.
 

Relevancy 23.22%

So newegg is offering the Acer 29" B6 B296CLbmlidprz IPS monitor for about 350. Seems like a pretty good deal but I can't find many reviews on it. I was wondering if anybody had any experience with this monitor and/or if you guys have better options for someone who is looking for an IPS monitor below 400 bucks. I want to game with it as well as do some 3d modeling and photoshop work. So I need reasonable response time for gaming. I was also looking at the HP ZR2440w and was gonna get that until I saw this deal on newegg for a larger monitor. 24" models are fine but if there are good deals on some 27" inch ones then I would be interested in those as well. Any suggestions? Thanks.
 

A:Question on Acer 29" monitor and other monitors

Heres the link for that monitor.
http://www.newegg.com/Product/Product.aspx?Item=9SIA24G1GC2421
 

http://www.techspot.com/community/topics/question-on-acer-29-monitor-and-other-monitors.201698/
Relevancy 45.15%

Laptop Model Acer Aspire G Graphic Card Model ATI Mobility Radeon HD MB 512MB) screen 5470 with problem Black ATI (Acer Aspire Radeon 4745G HD Mobility OS Windows bits Problem Laptop starting to turn to blackscreen constantly since last week At the Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) beginning it still manage to back to normal after restart But then after few days it turn to black screen during every startup whenever it progress until window start-up animation I can even still hear the welcome sound although the screen is black I can still using the laptop through safe mode After that I google for some related solution and found that it s probably the graphic card display adapter problem So I disable the graphic card Radeon HD Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) option under display adapter and it goes Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) perfectly well But when I enable the graphic card option under display adapter in normal mode my laptop screen will turns black again back to previous problem I tried to uninstall the graphic card under display adapter and reinstall the graphic card driver download from Acer Support but the problem still appears The graphic card driver after reinstall is appears to be ATI Mobility Radeon HD series instead of previously ATI Mobility Radeon HD Is it normal or I download the wrong driver although it s from Acer Support What should I do to solve this blackscreen problem nbsp

A:Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB)

Try this:
1) Uninstall the all AMD software with this AMD Uninstall tool.
2) Restart your PC.
3) Download and install the latest stable driver (13.4) from here: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx
 

http://www.techspot.com/community/topics/black-screen-problem-acer-aspire-4745g-with-ati-mobility-radeon-hd-5470-512mb.193825/
Relevancy 23.22%

Hi,

my acer laptop 7520 shuts itself down after booting for few seconds.
It has Vista but dont think its a software / virus issue. As I got into BIOS / booting menu, it did not stay there. it shuts itself down.

I removed CD rom from laptop but had same result. It has two 1GB rams, I removed them one at a time but had same result. I then removed Harddisk and tried to make it boot from USB, but had same result. It was shutting down after 10 - 30 seconds. I see the Fan running when ever I start the laptop. Fan is very clean. no dust, dont think its a heating problem then.

please can some one advise what could be issue.
thanks.

I ran it on full battery but had same result. Then I removed battery and connected the power cable into laptop, same result. it shuts down after few seconds.
 

A:Acer laptop 7520 shuts itself down after few seconds

Sounds as though its over heating. You might try taking a can of air and blowing the vents out. If this has not helped. You may need to take it to a repair shop. and have the thermal pads replaced.
 

http://www.techspot.com/community/topics/acer-laptop-7520-shuts-itself-down-after-few-seconds.200584/
Relevancy 20.21%

I have a Xerox Phaser 3117 Laser Black and White Printer. When print, half of the paper come out to the out-put tray. Other half still in the fuser unit. Stop printing and red light indicate. When I check the print out, all details have printed. But, first row of my details have moved very top of my A4 paper.( Whole document moved 2-3 inches above[to the top of the paper]. What is this and how to resolve this problems( Paper Jam and document move to top of the sheet)????
 

A:Xerox Phaser 3117 laser black and white printer problem

chathura said:





I have a Xerox Phaser 3117 Laser Black and White Printer. When print, half of the paper come out to the out-put tray. Other half still in the fuser unit. Stop printing and red light indicate. When I check the print out, all details have printed. But, first row of my details have moved very top of my A4 paper.( Whole document moved 2-3 inches above[to the top of the paper]. What is this and how to resolve this problems( Paper Jam and document move to top of the sheet)????Click to expand...

what can I do
 

http://www.techspot.com/community/topics/xerox-phaser-3117-laser-black-and-white-printer-problem.196151/
Relevancy 21.5%

On a home network. My computer runs Windows 7 and this is the printer. I've never done this, but I would like to do it on my own (as much as possible ); I ant to learn how to set up network and share devices on it. If there's a tutorial somewhere about this, I would appreciate it very much.

Thanks fellas
 

A:Help me share the printer

What you are probably wanting is a wireless router. The printer is wireless (Wi-Fi (802.11 b/g/n )). Once the printer is connected to the wireless network, anyone on the network whether wired or wireless will have access. The reason I suggest a wireless router is more possibilities than simply the printer, and the assumption that you don't currently have a network.

If you are already connected to a network and are using the USB 2.0 connectivity, all you would need to do is share the printer within printer properties. This would allow anyone on the network to see and use the device.

Which of the two directions would you like to adventure into? What exactly do you have to work with at the moment, or are you planning on purchasing network gear?
 

http://www.techspot.com/community/topics/help-me-share-the-printer.200244/
Relevancy 23.65%

Hey guys, I'm planning to get a laptop for general stuff and gaming. It's important to me that I can play PC games that aren't too intensive graphics wise. I need a laptop that can run games like Skyrim, TF2 and some MMOs at preferably medium to high settings (but I could go for med to low). The laptop I've found is here:
ACER V5-552 15.6" Laptop
Processor: AMD A10-5757M (2.5GHz, 3.5 GHz with Turboboost, 4MB L2 cache)
Storage: I TB HDD (5400 rpm)
6 GB RAM (DDR3) Up to 12 GB installable RAM
Graphics Card: Integrated Radeon HD 8650G
Resolution: 1366x768
OS: Windows 8(.1)
Is this going to work well with fairly easy games or could I go even more intensive for games like Crysis 3 and BF4?
Thanks for your help,
Joe
 

A:Acer V5-552 Laptop For Gaming

That processor is OK for gaming but the built in GPU is a little low if your expecting high settings even at 720p (With a decent framerate of course). On a game like Crysis 3 Which is so heavy on GPU's, you will likely only get low on that. As for BF4, I can say Medium 30+ FPS at that resolution. If you want a gaming grade laptop, your going to have to jump up a few notches for performance.
This is a medium-low end gaming laptop designed more for people playing not as intensive games as your listing. If you have a budget, could you list it and we will make some alternative solutions. Im assuming around $550 since newegg lists that laptop for that price, but with only 384 stream processors your not going to get far with that even at 720p except on the low settings. BF3 for instance on the 7660D (Which is just the 8650D essentially) runs at 58FPS average on low settings on a 720p monitor.
 

http://www.techspot.com/community/topics/acer-v5-552-laptop-for-gaming.199515/
Relevancy 20.64%

Hi

I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V

Holding down the power button en stop/reset won't work

How can I test the logic board is defect?

Image logig board






Cheers
Harrie
 

http://www.techspot.com/community/topics/canon-printer-pixma-mp610-no-power-no-display.197978/
Relevancy 23.65%

Hi everyone,

I have the Acer GN245HQ 3D monitor and I need your help to set the parameters of this screen for that I can have a good calibration of colors, and the best reactivity in game, for exemple what's the right value that I must set in the OSD, now I have the default value OSD=10.
Im using the GTX 680 graphic card.
Plz help me.

Thank you,
 

A:Acer GN245HQ Settings

Colours are subjective to each display, so must be calibrated separately. Google around for guides.
 

http://www.techspot.com/community/topics/acer-gn245hq-settings.196802/
Relevancy 46.44%

I don t how can I describe this problem detailed enough But my acer aspire G has been turning off randomly this laptop has been with me for about years now and I suspect that because of the age problems will occur I still hope that you guys can help me repair this on my own Windows vista core duo gb RAM mb video Here are the problems mainly about shutting off randomly -I will be using my laptop for the whole night and while using with no heavy applications running it will just shut off -the processor fan is running I shared this info because I suspect that its due to overheating but will still shut off -I already dismantled my laptop just to clean the fan I removed the dirt trust me I really cleaned the fan on Shutdowns, Charging Not 4935G turned Aspire Random when Acer and where the air is coming out clean still shutting off randomly -I tried putting a desktop fan under the laptop not just a usb laptop cooler but really an electric fan to remove overheating But still shuts off -now here s the weird part I play NBA k which we know is a very heavy game in terms of processing and video and RAM etc If I play NBA k it doesnt shut off Ever but if I do an alt tab to go to my desktop after a few mins it will Acer Aspire 4935G Random Shutdowns, Not Charging when turned on shut off weird thinking that shutting off will mostly occur while playing games But no it doesnt shut off while playing NBA k this is the only PC game I play -if I go to ctrl panel gt power options gt quot Acer ePower Management quot and if I adjust my CPU Speed to quot High quot and quot Maximum quot laptop will shut off in few seconds So right now my laptop is always running in quot Low quot OTHER MAJOR PROBLEMS - for example ill be using my laptop for the whole night in the morning if I plug in the laptop its charging BUT if I pressed the ON Button the charging STOPS so imagine if I dont have a battery inserted in the laptop it WONT TURN ON because its not charging -now if I put the battery and I turn on the laptop it will continue to boot BUT for as many as tries or more it wont reach my desktop because the laptop keeps shutting off AND ITS STILL NOT CHARGING Hope you guys can imagine -now my battery is like dead it doesnt last for an hour I think this is a common problem for year old laptop batteries so imagine the problem if my laptop wont charge even with the battery connected I cant turn on my laptop I just wish that the battery could hold enough power to complete the boot to windows -charging of the laptop or electricity flow will resume in the laptop after a few mins only if I make it to windows I don t know what triggers the charging But my laptop will just Start charging RANDOMLY So this is like the best condition of my laptop WHEN ITS CHARGING and NO SHUTTING OFF Occurs -everything just starts randomly in my laptop SHUTDOWNS AND CHARGING and I cant really find what triggers the SHUTDOWNS and THE CHARGING -if I remove the charger laptop will turn off battery cant hold the power so those are the problems I rEALLY HOPE THAT SOMEONE READ this and Help me repair this on my own Im not afraid to dismantle my laptop what could be the problem is it the battery the fan the charger im planning to reformat my laptop factory defaults or setting install windows but will this help is this a software problem Please help I know this is still a good laptop P S While making this post my laptop shut down TWICE I have to save this to a word file Pls Help nbsp

A:Acer Aspire 4935G Random Shutdowns, Not Charging when turned on

Turn off laptop take your battery off then hold power buttin down for 20 seconds then plug in charger with battery still off then turn laptop on . what happens ? is laptop running fine
 

http://www.techspot.com/community/topics/acer-aspire-4935g-random-shutdowns-not-charging-when-turned-on.193389/
Relevancy 24.08%

Got aspire 7520 series notebook, who wont boot but on boot flashes caps lock 2 times need to find what problem indicates two blinks
 

A:Aspire 7520 wont boot need help finding info

Remove the battery and connect the AC adapter only... does it then boot?
 

http://www.techspot.com/community/topics/aspire-7520-wont-boot-need-help-finding-info.195750/
Relevancy 47.73%

I am having an issue with the sound on my laptop. It will play videos and music, but at some point the sound just....freezes. It is like when a CD has a scratch and it plays the same two words over and over again. Most of the time the screen is not frozen and I can click to exit out or shut the computer down. The sound, however, does not stop when I shut it down or unplug it. It only stops when I remove the battery. Any suggestions would be appreciated.
 

A:Acer Aspire 5100 Sound Problem

I have an Acer Aspire 5332 and this used to happen to me but when it used to happen I would open up task manager, go to processes and find explorer.exe, then I would click it click end process then go to the applications tab and click new task, then just type in explorer.exe this fixed it for me and it happened for a while but went away on it's own. Hope this helps you.
 

http://www.techspot.com/community/topics/acer-aspire-5100-sound-problem.195295/
Relevancy 20.64%

Problem:
I have a PC that has to connect to a server through a modem for security reasons.
While it is connected to the modem, a screen needs to be printed.
The printer that is being used is connected to the local network.
While connected to the modem, attempting to print gives the error "The RPC server is unavailable."

System:
Windows XP Professional SP3
Printer server is Windows Server 2008
Modem is old 56k modem connected by serial port (don't think that matters)

What I've tried:
I have tried modifying the routing table to force connections to the subnet that the computer and printer are hosted on.
route -p add 10.1.0.0 MASK 255.255.255.0 10.1.61.0 METRIC 40 IF 0x2
ip for the PC is 10.1.61.53, ip for the printer is 10.1.61.22, IF 0x2 is the integrated NIC
The RPC service is running, and I have also started the RPC locator

Any suggestions what I should do next?
 

A:Unable to print to network printer while connected to modem

These are correct

ip for the PC is 10.1.61.53,
ip for the printer is 10.1.61.22, IF 0x2
but this is not

route -p add 10.1.0.0 MASK 255.255.255.0 10.1.61.0
and should not be necessary at all, if the PC gateway is on 10.1.61.x

Instead, get the output of ROUTE PRINT and post that
 

http://www.techspot.com/community/topics/unable-to-print-to-network-printer-while-connected-to-modem.195362/
Relevancy 21.5%

It seems that when people print at my office, there the print randomly delays which backs up the print queue. All PC's & printers are hard wired. The printers are on a printer server. I tried restarting the print spooler, but nothing happened. Any suggestions?
 

A:Printer network delays

The printers are on a printer server.Click to expand...

Power cycle the print server.
 

http://www.techspot.com/community/topics/printer-network-delays.194666/
Relevancy 21.07%

hello,
I'm fairly new at networking.
Devices:
Oce fx300 wired printer
laptop running windows 7
netgear WGR614 v8 with DD-WRT Nokaid firmware

Problem: wireless router connection only established when ethernet cable is connected to router and computer, once unplugged the connection is disabled.

I am attempting to make this wired printer wireless through my wireless router which has been recently fitted with dd-wrt software. I have already set a static ip adress for the computer, and set the local printer connection up. My problem lies withing the router setting I am assuming since it seems like the router wont connect wireless. Please help.
 

http://www.techspot.com/community/topics/wired-printer-to-wireless-via-router-issues.194602/
Relevancy 45.58%

Alright, as the title explains, my computer won't use any form of headset's mic, like at all. Not even its own built in mic, please halp, and I know not **** about computers, so if you could like, explain in ******* terms, I would be incredibly grateful. It might help that I'm a computer gamer, so this would be awesome if you guys would help me. Thank you!
 

http://www.techspot.com/community/topics/acer-aspire-5733-wont-use-logitech-h390s-mic-but-picks-up-sound-wont-detect-voice-on-any-mic.194573/
Relevancy 21.5%

Hi,

I had a power outage in the middle of printing a document on my Photosmart C6150 printer. When the power came back on, the printer was frozen and will not come back up to the ready mode. I canceled the print job from my computer and it indicates that the printer is ready, but the printer itself is in a repeat cycle. All I have on the display is the HP logo and a bar that suggests it is trying to come back up. The exclamation point on the panel then flashes and I get a message that tells me of an improper shutdown and tells me to hit "ok". This message then disappears and it starts the cycle all over again. This has been going on now for two hours. Any suggestions???

Thanks
 

A:Printer will not complete reboot

Try manually shutting it off for a minute and turning it back on.
 

http://www.techspot.com/community/topics/printer-will-not-complete-reboot.194550/
Relevancy 24.08%

Ive got an acer notebook that dosent like to turn on it will sometimes and when it dose it normally gose in to hibernation you can then get it to turn back on buy pushing the power buton but I gose back to hibernation after 2mins or less I have tryed dischageing the system I need to get it runnig for a project im doing plz help any help apreciated and thanks in advance also I dont no what verstion it is all I no it was bought new in 2008
 

http://www.techspot.com/community/topics/acer-notebook.194498/
Relevancy 47.73%

So here is my problem screen Aspire problem Acer 5920G with Acer Aspire G Acer Aspire 5920G screen problem also I don t understand much about computers bear with me One night I turn off my laptop like normaly the next morning I turn it on for a surprise The screen remained pitch black even though I could clearly hear windows boot up along with other programs like skype popping up Pressed a few random keys and thought I should restart Same thing no reaction from the screen what so ever but I can still clearly hear windows starting up So I browse the internet and here s what I ve tried - I removed the battery held the power button for a while re-inserted the battery turn it back on gt No help - I switch my RAM cards with one another gt Doesn t work - Turn it on and point a flashlight at the screen to check the backlight nada - I check if the magnet for detecting if the screen is up or down is working and it is when I lower my screen it goes to hybernate mode boots up if I click something - I plugged in an external monitor new and functional and press the switch screen button combo but its not reacting the external monitor stays black too It doesn t flicker or anything its giving off no signs of life but I m puzzled because if the screen died it should clearly work on an external monitor which it doesn t Has anyone encountered a problem like this Any ideas on how I might fix it myself and even if I can I m still wondering about what it might be before I send it out to find out the repairs are too expensive I d rather buy a new one nbsp

A:Acer Aspire 5920G screen problem

Try running one memory at a time... first one module, then the other..

Then test with a different hard drive, to see if you can boot to an install screen with your recovery disk...
 

http://www.techspot.com/community/topics/acer-aspire-5920g-screen-problem.151537/
Relevancy 20.64%

I've got an Infoprint 1534 that is putting a thin blue streak down the left side of all pages. Someone told me they empty the waste canister when this happens, is that right? I'm not very knowledgeable about printers. There's what appears to be a "waste canister" on the left side which comes out and is full of dark coloured fine dust. Do I dump this out? Any direction is greatly appreciated.
 

A:Blue streak down side of papers from colour printer

I guess so. Waste is waste! Printers can do funny things when they aren't configured correctly. I'd say that dust is rubbing on each page as it comes out.
 

http://www.techspot.com/community/topics/blue-streak-down-side-of-papers-from-colour-printer.193767/
Relevancy 24.94%

Hi, I'm trying to install the XFX Radeon HD 5450 1GB graphics card into an Acer Aspire x1301-U1312. So far, I physically installed the card into the PCI express port (x16) but it doesn't seem like it's recognizing the monitor. When I remove the card and plug the HDMI cable back in the integrated GeForce 9200 graphics card, it works just fine.

What's the best solution to this problem!?

Any whom, thank you.
 

A:XFX AMD Radeon and Aspire x1301

Did you install the drivers before you physically installed the card? That would be my first suggestion. Check to make sure you put it in the PCI Express 2.0 x16 slot and not the PCI Express 2.0 x1 slot. Also, try the DVI or even the VGA connections on the card to see if those work instead. You might have a bad HDMI port on the card itself.
 

http://www.techspot.com/community/topics/xfx-amd-radeon-and-aspire-x1301.193159/
Relevancy 20.64%

Help please?

I have recently moved to a rented property and have had fibre broadband installed. The hub is next to the modem which had to be placed at the main telecom entry point to the house. This means that the hub and modem are in the sitting room. I want to have my printer upstairs but do not wish to run a cable all the way from the hub to the printer. I do have a couple of old wireless hubs - a Belkin and a 2-Wire. Would it be possible to put one of these upstairs hardwired to the printer and configure one of these to pick up the wireless signal from the new hub? Or am I mad??
 

A:Using a router to create connection from a wireless network to a wired printer

Hey winkent. I see a need for more info.

Is your "modem" a combo modem/router, and if so, is it a wireless model?
How many pc's are being used and how do they connect, wired or wirelessly?
Is this printer a network printer (has an Ethernet jack)?
Are these hubs or are they switches?
 

http://www.techspot.com/community/topics/using-a-router-to-create-connection-from-a-wireless-network-to-a-wired-printer.192877/
Relevancy 46.44%

Hi guys I m a bit desperate right now Here s the thing I have an acer g English bought in the Netherlands out of warranty original HD GB western digital included with windows home premium The hard disk is dying Everytime I restart windows demands a launch repair that takes HOURS otherwise it won t boot and will restart I bought a brand new Momentus XT GB It was fairly simple to remove the original disk and replace it physically Problems start with trying to install an OS on the acer -First off I went to the bios and set it to boot up first with the optical drive so I can use the recovery DVDs that I created on day one when I purchased the laptop It just doesn t doesn t do anything when I put the first one and restart Only the prompt blinking and the disk even stops spinning -I made New hard on drive 7 5740 can't windows acer aspire install sure the DVD drive reads discs I put back my old hdd waited till I can use windows again hours after launch repair and tried to read many DVDs and they all seem fine -Back to New hard drive on acer aspire 5740 can't install windows 7 the new drive installed No recovery I researched a bit and found out that erecovery only works New hard drive on acer aspire 5740 can't install windows 7 on acers with the quot hidden partition quot on the disk that came from factory Gotta find New hard drive on acer aspire 5740 can't install windows 7 another plan -I downloaded a copy of windows GB and burned the iso file on a blank DVD with hopes of installing it and then activating it with my key - Inserted Windows DVD created with the microsoft tool Same problem no reading I check again if my optical drive can read at all checked it reads DVDs - At this point I m not sure what else to do What I want All important files I had in my old hard disk are backed up somewhere else I just need to get rid of the dying disk and replace it with my brand new hd and install windows on it and then activating it I just can t seem to do this any thoughts would be appreciated Thanks nbsp

A:New hard drive on acer aspire 5740 can't install windows 7

Try formatting the new drive using something like this:
http://www.ultimatebootcd.com/download.html
then try and install Windows 7
 

http://www.techspot.com/community/topics/new-hard-drive-on-acer-aspire-5740-cant-install-windows-7.192341/
Relevancy 21.93%

Just bought a new cannon pixma printer as soon as it was plugged in the computer blew can anyone help with this
 

A:New printer

Blew how? Explain exactly what it did please.
 

http://www.techspot.com/community/topics/new-printer.192484/
Relevancy 21.5%

If you tie-dye your own paper, let it dry and then put it in the printer and try to print a paper, will it ruin your printer?
 

A:Tie-Dye paper vs. Printer

Not sure why you would want to do this. But, it shouldn't mess up your printer if it's completely dry.
 

http://www.techspot.com/community/topics/tie-dye-paper-vs-printer.192474/
Relevancy 20.64%

Just hooked up to att uverse ,they installed a att200 modem/router ,I have 12 mbps internet. I cant seem to make it hook up to the router
I have tried to enter the info on the printer keypad and throught the computer. computer is pent. 4 ,xp,

I was able to connect my laptop and kindle to the router.
I am not sure if the printer is recognizing the router or vice versa.
in general I dont know what is happening

I just found out it will print from my laptop,so I think my printer is connecting to the router,correct?
just tried to print from laptop again and did not work.
the wifi light on the printer is off.
it used to work great with the other router before att upgraded me

Printer is a epson workforce 520

It is a motorola router
 

A:AT&T installed new router/modem now my printer will not connect wifi

It worked, then didn't work? What? :S

Maybe check the wifi encryption. Make surei t's WPA2 and not anything else.
 

http://www.techspot.com/community/topics/at-t-installed-new-router-modem-now-my-printer-will-not-connect-wifi.192245/
Relevancy 21.5%

I have a HP laserjet 4014dn. Only when I print large reports, I get a little bit of black residue on the edge of the paper. I just replaced the maintenance kit, but it only helped alittle. Any suggestions on how I can get rid of it?
 

A:Printer issue

Not sure if this will help, but maybe cleaning the drum may help? http://www.ehow.com/how_4811815_clean-printer-drum.html
 

http://www.techspot.com/community/topics/printer-issue.192043/
Relevancy 47.3%

Hello all.
My sister in laws Acer aspire 5750z-4885 was recently sat on and the screen is cracked. I was going to replace it for her but before I order a new screen I was wondering if it is even just the screen and not something else that I cannot repair. The laptop since getting the screen cracked will shut off after powering up in about 4-7 seconds or so I haven't used a stop watch lol.
I am wondering if perhaps there is a short or some other dmg caused by the screen being cracked that will not be remedied by replacing it. I have limited experience with cracked lappy screens. Thank you all so much for any and all replies I love this board and it has helped me many times in the past.
 

A:Acer aspire 5750z-4885 shuts off after 4 to 7 seconds

Yes, the cracked LCD screen can be the cause of the shutdown. Replacing the LCD panel is not that difficult for someone experienced, but for you it might be too much. You have to disassemble the top cover without breaking the plastic. The video cable might not be included with the new panel, so you would have to use the old cable. The cable connection to the panel is very delicate...
 

http://www.techspot.com/community/topics/acer-aspire-5750z-4885-shuts-off-after-4-to-7-seconds.191911/
Relevancy 47.73%

Thanks,..this laptop acer Aspire 4551 start but the display stay black (no video) I'd like to flash the bios,... I've seen some videos but I don't understand very well ,...could you to teach how to do ? step by step please......GOD BLESS YOU
 

A:Flashing Acer Aspire 4551 BIOS

Well, can you even boot up into the machine? Or is it all black?
 

http://www.techspot.com/community/topics/flashing-acer-aspire-4551-bios.191692/
Relevancy 48.16%

Hi, I have been having some technical difficulty's lately with my Acer ASPIRE's monitor. I will be watching a video, doing work or making one of my games when my monitor will go to black-and-grey lines. So far, the only way to postpone the problem is (Once Problem has occurred) to hit the CTRL-ALT-DEL keys, which will bring to the Windows 7 Options Menu. Then just close that... But it will happen again and the fix is rendered useless I then have to restart my laptop. Any ideas? Please comment! ​
 

A:Acer Aspire monitor problems

I think this may be a graphics card issue. Please tell me your system specs (CPU, Graphics card, OS - 32 or 64bit).
 

http://www.techspot.com/community/topics/acer-aspire-monitor-problems.190916/
Relevancy 21.07%

Why would the printer change from normal operation change to printing emails in cryptic
I'm asking this to try help out my neighbor . But I was wondering if the email was the cause ?
regards drecked
 

A:Printer started printing cryptic text

Open NOTEPAD, type a few lines and the <ctl>P to print it.

If it is reproduced correctly, then it's the goofy email,

otherwise, disconnect power, wait a minute or two,
then go through the printer settings and test again.

Still having a problem, download and install new firmware from the vendor.
 

http://www.techspot.com/community/topics/printer-started-printing-cryptic-text.191448/
Relevancy 21.5%

I am trying to print a trial balance using peachtree DOS program and the above printer.

It prints alright but extends every page of trial balance into two pages. For every page, it prints
the last line on the next page and then goes on to next page. I am trying to say that
it uses 4 pages for 2 pages of print material. If it can print 2 more lines on a page, then it can
accomplish this task in 2 pages. At present the printer setup will only allow 60 lines/page.
Is there a compression code that I can use to increase the no. of lines that the printer will
print per page?

Any help will save me half the no. of pages.

Many thanks.

Best regards,
Gulab Gidwani
 

http://www.techspot.com/community/topics/hl2700cn-brother-printer.191423/
Relevancy 20.64%

I have a HP LaserJet Earlier this week I was using my laptop with a phone and an external hard drive both connected to the laptop HP power printer 2430 since error surge will USB LaserJet print not through USB connectors However when I connected the HP LaserJet using a printer cable with HP LaserJet 2430 printer will not print since USB power surge error a USB connector I received a message that said USB Power Surge Error or something similar Since then I have not been able to print I bought a new printer cable and it still does not work I ve been able to use the USB port on the laptop by connecting other items and they work fine so that s not the problem I am able to use the Menu button on the Printer to print out the Printer Info such as configuration page usage page etc However I can not get the Printer to work via a Printer Cable I keep receiving an error that says This document failed to print Is it possible the port which accepts the cable on the printer is damaged My family uses this printer on a daily basis Any assistance with this issue will be greatly appreciated Thanks Rachel nbsp

A:HP LaserJet 2430 printer will not print since USB power surge error

I forgot to add that the printer previously worked using this USB Printer Cable for years prior to this.

I'm still looking for help on this. If anyone has any knowledge regarding this, PLEASE let me know.
Thanks!
 

http://www.techspot.com/community/topics/hp-laserjet-2430-printer-will-not-print-since-usb-power-surge-error.189947/
Relevancy 21.5%

Help Please!

Our Printer has decided not to work - have uninstalled it and re-installed it but the computer will not recognise it. I should say I am not very techy-minded but usually can manage this but fter following all the instructions etc there's something not righ, and I dont know what!

it is a kodak 7250 an connected via wi-fi. It is connected to the wi-fi network, same one as the computer but the computer does not detect the printer.

have followed all the instructions via kodak website and other places and am beginning to lose the plot with it now. [would love to chuck the thing in the blooming pond!!!]

anyone any ideas?
 

A:Printer not detected!

Ok, I'm not panicking now. think I have sorted it out now. (something to do with the IP address, device manager and the spooler service (?!?) lol.)
anyway got one computer connected anyhow, so will do for now.
 

http://www.techspot.com/community/topics/printer-not-detected.190989/
Relevancy 48.59%

Hey guys I have some questions im sadly gonna look at putting some upgrades into my acer cause its small but I was wondering when I put the HDD from my acer into my toshiba and back into my acer I get a blue screen any one have an idea?
 

A:Acer Aspire 5735Z

If the 2nd PC modified the windows system files in any way, you'll have issues.
 

http://www.techspot.com/community/topics/acer-aspire-5735z.190754/
Relevancy 21.07%

What is the usual diagnosis or outcome when an HP C AIO won HP many not self errors diagnostic; test printing printer t print a correct Self Test Diagnostic from control panel It printed it one won t print another because of multiple errors was missing ALL data from boxes amp sections of pg report - except color print test boxes looked fine Just printed report sections headers amp data boxes Gone through usual printer reset steps power reset HP printer not printing self test diagnostic; many errors clearing hardware error codes via quot secret menu quot then unplugging amp waiting sec That clears or more errors but they re-appear The errors just rotate clear another pops Carriage or paper jam neither true carriage moves easily HP printer not printing self test diagnostic; many errors by hand - isn t quot jammed quot when reports it Hitting OK starts carriage moving again No paper or bits Took lid amp top cover off No paper bits that are visible - front back inside paper tray area w o dismantling entire unit Ink system failure printed perfect text lines amp color boxes on the partial HP printer not printing self test diagnostic; many errors self test after that error appeared amp was cleared - several times Pump Motor Stalled DON T think ink motor is stalled or not working Printed perfect lines headings amp color boxes on the one self test lacking data With top cover off can see all pump gears belt turning normally in warm up Pump sounds normal during printer prep Paper pick up rollers NOT turning - that s true except for ONE self test w o the data They turn easily by hand not dirty - just don t engage Is it just fried With so many errors - most seem false AND unable to print accurate self test diagnostic not sure this is just a quot reset quot issue Had a power outage - but it was on surge protector UPS w voltage control - ALONG w modem router VOIP ATA PC monitor None were damaged Tried plugging printer into wall outlet - no change DC voltage of printer adapter checks OK w meter IS it a POSSIBILITY though AC adapter voltage is OK it s not delivering correct mA Not sure how to check DC mA of AC adapter - any advice there It cost after tax - yrs ago at steep discount Light use If it s toast not sure I d buy an HP not just because of this - more for HP s apparent declining reputation For avg home use - All In One types wondering which brand now has best satisfaction reliability AND least trouble using generic ink Maybe they re all junk now As in now yrs of light use may be avg life DON T want one w colors combined in or cartridges Thanks nbsp

A:HP printer not printing self test diagnostic; many errors

Seems toast to me. You've been pretty thorough.
 

http://www.techspot.com/community/topics/hp-printer-not-printing-self-test-diagnostic-many-errors.190628/
Relevancy 21.5%

I have a HP Laserjet 4000n PCL6 that is connected to a windows XP in a virtual setting on the domain network. I believe it has a static IP address (because it doesn't have the typical 192.168.100...) number. When I try to add the printer to the local environment in windows 7, I go to the control panel, add a printer, I choose network the printer or a printer attached to another computer, it shows the printer name, and then I choose connect to this printer, but it says I'm missing the .inf file. Anyone know how I can get this working on the windows 7 side?
 

A:Networking a printer on a domain

.inf file contains the driver information. In the settings on the XP, you can go into printer sharing settings. Maybe you can enable 'hold additional driver files for download' or something. I don't know, I do this via Server 2008 R2 (no idea why you aren't either).
 

http://www.techspot.com/community/topics/networking-a-printer-on-a-domain.190579/
Relevancy 21.5%

I am attempting to print in my car from a Lenovo Thinkpad to HP Laserjet P1102w which is all being powered by a 1500 watt power converter that is hardwired to my car battery. However it will only print one page or less before the power converter loses all power and then reboots within 30 seconds. This continues to happen no matter what I do or if I only have printer plugged in. Ideas?!!
 

A:Printer powers down mid-print

Laser printers use a lot of power, and 1500W is a lot to pull on an AC circuit converting from a car battery. I suspect that the voltage output of the car battery is dropping too low for the DC/AC conversion. Attach a voltmeter to your car battery and watch and see if it drops off during the printing task. Is the engine running (alternator replenishing the battery) at this time? They make car batteries and beefier alternators for people with high end stereo systems in their cars, you may have to go that route.
 

http://www.techspot.com/community/topics/printer-powers-down-mid-print.189856/
Relevancy 24.08%

I have an acer aspire 5315 and when I boot it up with the power adapter plugged in nothing happens. Then when I boot it up using only the battery power, it attempts to boot but this only lasts for a few seconds and shuts off again.any suggestions on what might be wrong?
 

A:Acer won't boot up

Remove the battery and try the AC only and see if it boots up?

Also what happen prior to this issue?
Did the laptop shutdown after a crash?

Check AC power that AC power cord and adapter can be replaced from online vendors cost is pretty cheap. I own two ACER/GATEWAY laptop and ACER Netbook both use the same AC adapter. To test your adapter you need what is called a multi- AC/DC tester it has positive and negative leads. If you don't want to get to technical you can replace the AC power adapter.

1. Rule out that the AC power adapter is defective?
2. Rule out that the Battery is defective or just plain dead?
3. If AC power only without battery installed won't start-up the laptop then you know AC power adapter is bad.
4. Check the pin connection using a flashlight to see if the pin inside the laptop is bent? If this is bent or damage then the laptop needs to be repaired. Normally this would be easy to fix most trained service tech would replace the module for the power adapter if such a part exist or they would replace the entire MOBO (motherboard).

Is the laptop running Windows 7 or 8?

Your model AC Adapter: http://www.amazon.com/Power-Supply-19V-3-42a-1-77mm/dp/B001MQ694W if you need to replace it that battery is on this link too. Both are really not to expensive. You should always have a replacement battery and AC power adapter around just in case of problems like this one.

Also if it's not the AC adapter or battery then you're looking at a defective MOBO (motherboard) or defective HDD. This laptop would need to be troubleshooted though to make sure what's the issue could be. But with the above info you should be able to figure most of what the issue could be.

Good luck!

 

http://www.techspot.com/community/topics/acer-wont-boot-up.189783/
Relevancy 46.01%

Help!!! yesterday it still working but today,no sounds come out from the speaker,I used headset to test it and it's work,but when I unplug my headset it still no sound,I already try to reboot using safe mode but getting confused.. what can I do???
f.y.I : I already check the sound driver,no question marks appeared.
 

A:My Acer Aspire 4741G laptop sounds suddenly stopped working

"I already checked the sound driver, no question marks appeared"... Do you mean no exclamation points like this (!)? If you can hear normal sound from the headset the sound driver is okay. This could be caused by a keyboard setting. Make sure the sound is all the way up and that it is not muted
 

http://www.techspot.com/community/topics/my-acer-aspire-4741g-laptop-sounds-suddenly-stopped-working.189508/
Relevancy 23.22%

I have been given a acer extensa 5620 that appears to have been half repaired with acer erecovery management. I cannot find the download for this program anywhere. I have already tried alt F10 and it will not work.
please help!
 

A:Acer Extensa 5620 eRecovery problem

You probably need to purchase a Windows install disk to install Windows fresh
 

http://www.techspot.com/community/topics/acer-extensa-5620-erecovery-problem.189094/
Relevancy 23.22%

We hve an acer laptop and we bought it last oct.2009 since last mnth until now when we are using it ,it will suddenly shut down.what do u think is the problem of our laptop. please can you help us?thanking you in advance. we are soliciting an opinion from you...your opinions are highly requested and apreciated!
 

A:Acer laptop suddenly shut down

It could be overheating because the CPU thermal paste or pads are dried out or burned. The laptop can be repaired by a qualified service person
 

http://www.techspot.com/community/topics/acer-laptop-suddenly-shut-down.188852/
Relevancy 47.3%

Hi all got above named laptop but when I turn it on it freezes every time when it get to the black screen where it says start windows normally or other options such as safe mode etc is this hard drive failure thanks in advance
 

A:Acer Aspire One freezes at 'start Windows normally' screen

Update-- on black screen if I click on safe mode or safe mode with networking it does its thing but then after loads of things it just restarts back to that screen if I click last known config it get to the loading windows screen then I see a hint of blue screen then it restarts back to black screen start windows normally screen
 

http://www.techspot.com/community/topics/acer-aspire-one-freezes-at-start-windows-normally-screen.188714/
Relevancy 21.5%

HP4110 All-in-One / Windows 7 ...

When linked with XP this printer came up with an on-screen box when it ran out of paper:- add paper, then 'Continue' or 'Cancel Print'. Now, on Windows 7, there's nothing. Have tried turning the power off for 30 seconds and all the other 'fixes' mentioned in general shopping around, including checking the paper type, size, etc., but nothing works. The Printer dialogue box just continues to display 'out of paper', despite the fact it's already managed to print out an error test sheet.
Any ideas anyone please?
 

A:HP printer tells me it's out of paper but it isn't...

This problem happens with me too. Please help
 

http://www.techspot.com/community/topics/hp-printer-tells-me-its-out-of-paper-but-it-isnt.188159/
Relevancy 48.16%

I know my Aspire won't laptop on Acer turn first mistake was purchasing an Acer Lesson learned Now this morning I turned on the laptop forgot about it and went out for a couple hours When I got home it was in the BIOS set up I had a hard time exiting It wouldn t let me just exit In case my kids touched anything I set the Bios back to previous setting and then it let me exit Now it won t turn on The battery is charged The power light comes on the disc drives does it s thing for a second and the fan kicks in but that s all The fan Acer Aspire laptop won't turn on goes off and all is quiet with power light still on This has happened before but not for a long time and after trying to turn it on a couple of times it would I ve tried pulling the battery and power cord holding the power button for a minute and even pressing the power button for a minute then replacing battery and power cord but still nothing The model is an Acer Aspire Z- Any suggestions Thanks nbsp

A:Acer Aspire laptop won't turn on

How old is this laptop?
 

http://www.techspot.com/community/topics/acer-aspire-laptop-wont-turn-on.188383/
Relevancy 48.59%

Hi, I have an acer aspire laptop that won't turn on. It was working fine unplugged and I went out leaving it on but unplugged to mains power. When I got back I plugged utility in and tried to wake it up. Now I have it plugged in and the power adapter has a green light and the battery light on the laptop is amber. When I press the power button, both these lights go off. Any suggestions would be appreciated. I have tried removing all power and holding the power switch for 39-45 seconds. Then plugging back in without battery and turning on- that doesn't work! Please help.
 

A:Acer Aspire won't turn on...

Did you remove the battery when pressing the power button for 45 seconds?
 

http://www.techspot.com/community/topics/acer-aspire-wont-turn-on.187626/
Relevancy 23.22%

I will post a link to a computer that was purchased for me I have been out of computer gaming for awhile and have recently started playing a game called Dayz It is gaming Upgrading desktop retail for Acer my a modifcation for a game called Arma The computer runs most things that I have played fairly well However Arma is a high demand game which typically gets me under FPS I was thinking of getting rid of the computer and buying a new one or upgrading some parts inside From what I have been reading processor video card ram and power supply would be good places to start I haven t taken the computer apart yet to look inside and see what I can add to the current motherboard Budget is a concern and I don t want to go crazy I don t need to play on ultra settings Upgrading my Acer retail desktop for gaming but normal or high would be nice Any suggestions would be great Here is the PC http www walmart com ip Acer-AM Windows- -Home-Premium-Monitor-Not-I Thanks nbsp

A:Upgrading my Acer retail desktop for gaming

Without knowing your full system specs I would say, you could probably get by with a GPU and power supply upgrade. Do you know what size power supply you have in the machine? I'm also assuming you don't have a dedicated graphics solution, since you have an AMD-A6 CPU.
 

http://www.techspot.com/community/topics/upgrading-my-acer-retail-desktop-for-gaming.188098/
Relevancy 48.16%

Hi there TechSpot Long time since I last posted but I had a very specific question I m not sure I could get answered elsewhere So my lady friend has been doing all her computing on her Droid RAZR (possible V5 -- replacement GPU y/n?) Acer Aspire Laptop which is kind of sad for me - as a long time system builder and power user - to watch With Christmas coming up her parents and I were going to buy her a laptop Now I work at an electronics retailer and on Black Friday we Laptop GPU replacement -- Acer Aspire V5 (possible y/n?) started selling the Acer Aspire Laptop GPU replacement -- Acer Aspire V5 (possible y/n?) V for I impulse bought it figuring with a GHz Core i and gigs of RAM it was no weakling for a beginner I ve always fantasized about playing games with an SO cooperatively and I thought maybe just maybe this rig could manage FPS in simple games like Magicka or even ambitiously Left Dead But no such luck despite the age of those games My question given that it s got Intel HD integrated graphics it s doubtful the machine even has a PCIe port on the motherboard But before I tear it apart to find out I thought I might Laptop GPU replacement -- Acer Aspire V5 (possible y/n?) ask the wise minds of TechSpot So anybody have any idea if I can upgrade this sucker TL DR Bought a budget laptop for my girlfriend Want to know if I can upgrade from integrated video on this particular model an Acer V - nbsp

A:Laptop GPU replacement -- Acer Aspire V5 (possible y/n?)

There's no way to upgrade a video card in a laptop unless it's something from ASUS, MSI, Alienware, (If you're lucky)

But even if you could, the upgrade would probably be anywhere from $200-$600+ maybe even more. Old 7900GTX Go cards are still fetching roughly $100 on Ebay
 

http://www.techspot.com/community/topics/laptop-gpu-replacement-acer-aspire-v5-possible-y-n.187518/
Relevancy 24.08%

Hello.. I have a acer revo rl 100, the problem I have is when I go on the 3d option when I press play its saying I need a 3d compatable tv.well I have got a 3d tv,its a lg,im just wondering if it is saying a active tv,mine is a passive tv,when I click on the 3d on the screen on the bottem it goes to 2d mode,im all confussed,I need help please,is there any help I would be greartfull
 

http://www.techspot.com/community/topics/acer-revo-rl-100.187105/
Relevancy 21.5%

My HL1440 printer died. With that printer I was able to print from windows XP as well as from Peachtree 10.0 version which is a DOS program. This program requires a parallel cable port
as well as a printer that will emulate HL8PS printer or HP Laserjet I or something similiar.

I called Brother, but they stopped making HL1440. I do have HL2040 with a parallel cable, but
according to Brother, they do not have DOS driver for that printer.

Is it possible to find a printer in the market that will help. I do not want to change my software,
because I cannot find printer with parallel cable and DOS driver.

I will appreciate any help.

Best regards,
Gulab Gidwani
 

A:Need a printer to print from DOS

You're better off moving to a USB printer as few systems now support Parallel connections.
A USB printer is rather cheap these days and if you move to better OS or Application, then it will still be supported.
Why waste time with 1998 technology?
 

http://www.techspot.com/community/topics/need-a-printer-to-print-from-dos.187059/
Relevancy 46.01%

Hello about weeks ago my wifes acer aspire laptop showed an unwelcomed operating system not found on the screen I have since removed the cover and felt and listened to Acer hard Aspire 5536 Will Samsung work in drive HN-M101MBB the hard drive and it is definitely not even spinning up either that or it s the most calm quiet hard drive ever I think the hard drive failed I am considering purchasing the hard drive listed below for this acer aspire computer will this hard drive work in this computer I don t want to make the mistake of purchasing it and find out it doesn t work because it s too much capacity or LBA addressing is incorrect or some other reason the expert advice I request is most appreciated here s links to newegg and info about the hard drive http promotions newegg com NEemai MC-IGNEFL - -EMC- -Index- -E - -All http www newegg com Product Produ -Index- -LaptopHardDrives- - -L O SAMSUNG Will Samsung HN-M101MBB hard drive work in Acer Aspire 5536 Spinpoint M HN-M MBB TB RPM MB Cache quot SATA Gb s Internal Notebook Hard Drive -Bare Drive nbsp

A:Will Samsung HN-M101MBB hard drive work in Acer Aspire 5536

Basically, it depends on what version of Windows you are running and make sure that the laptop has a SATA or PATA connection...
 

http://www.techspot.com/community/topics/will-samsung-hn-m101mbb-hard-drive-work-in-acer-aspire-5536.186635/
Relevancy 21.5%

We have a printer which we would like to share but we cant because it wont work with the cross over cable (rj45) it only works by usb I don't know why can we share it this way. it a SHARP MX-3110N PCL6
 

A:Share network printer

Don't use a crossover cable - use a standard patch cable (plain old regular ethernet cable)
 

http://www.techspot.com/community/topics/share-network-printer.186702/
Relevancy 21.07%

On a Dell desktop w/ XP SP3, the printer (wired Lexmark 1200) will print a page from the browser while online. The printer will not function in Word or Notepad. Any suggestions?
 

A:Printer working part of the time

What are the setting differences between browser and Word? Page size, scaling etc. Try from Notepad.
 

http://www.techspot.com/community/topics/printer-working-part-of-the-time.186716/
Relevancy 23.65%

Hello everyone I have acquired my daughter s boyfriends extensa I have previously made him recovery cd dvd but he lost them I wish to restore this laptop to factory What I have done so far is to make the PQSERVICE partition visible as I needed to recover the password When I use erecovery through windows vista I Acer 5260z Extensa get the option to restore to factory enter password and answer the appropriate questions like this will Acer Extensa 5260z erase all data on drive c then the computer reboots and I have two boot options erecovery or windows vista c drive So I choose erecovery acer does its thing and there is NO restore to factory option and the following error message failed to get drive partition drive letter pqservice is now drive f I do get options to repair windows vista one for erecovery and one for drive c When trying to remake recovery cd the dialog box shows that I want to burn to drive E the dvd drive yet an Acer Extensa 5260z error pops up saying not enough space on drive d How can I get the laptop to restore to factory Thank you so much Jayne nbsp

A:Acer Extensa 5260z

www.ehow.com/how_7355053_use-partition-acer-extensa-562
 

http://www.techspot.com/community/topics/acer-extensa-5260z.186063/
Relevancy 48.16%

Hi. I have got this laptop with these specs

i3-2350M
320gb hard drive
2gb DDR3 memory

I have got a CD with it which contains many drivers. for example only for bluetooth there r 3-4 drivers with different vendors. what should I do? install all of them?

* currently I hv installed all of them. Laptop now got a slow startup and hangs some times but dats very rare and recovers most of the times
I dont play heavy games etc on it too

waiting for replies
regards
 

A:Acer Aspire 5749 drivers

So game lags when u playing heavy games if so then its probaly just about managing to play the games with the specs
 

http://www.techspot.com/community/topics/acer-aspire-5749-drivers.185726/
Relevancy 23.22%

I recently bought the ACER T231H Multitouch Screen. Earlier this Summer, I had problems with calibrating the Monitor. But eventually, I made it work. After a few days, I had many "Blue Screens" on my PC, and reinstalled the Windows 7 64-bits. And after that, I have had troubles with calibrating the Monitor....When I enter the Calibrating Section, and hit Calibrate, I am not able to prese the Cross in the Top Left corner of the Monitor....I have updated with the latest drivers, and the Monitor is set to Primary....Hope someone can help me with this issue.....
 

A:Cannot calibrate my new Acer T231H multitouch screen

Try uninstalling the driver and letting Windows install it's generic driver to see if that changes anything. If it does, then you'll know it's a driver problem. Also look into your video card drivers and update as nec. - something has an incompatibility issue. I never use software that comes with monitors if I can avoid it, because of issues like yours.
 

http://www.techspot.com/community/topics/cannot-calibrate-my-new-acer-t231h-multitouch-screen.185535/
Relevancy 21.07%

Ok this one has be stumped Sharing a printer on a heterogeneous network ie Macs PCs First understand that File Sharing is working in both directions Mac files are accessible to the PC and conversely Second the printer in question is USB attached and when connected to the Mac the Mac can print to it when connected to the PC it can print too File Sharing setup uses User PWD to access the shares belonging to that specific user SO one would assume that it would be trivial to Add Printer point to the other system select the printer that is shown as shared and you re done printer network a Sharing on heterogeneous a GRRR -- nope The desire operation is to have the Printer Shared on the Sharing a printer on a heterogeneous network PC and the Mac to access it From the Mac OS accessing the PC Win Pro SP attached printer nothing appears in the print queue Sharing a printer on a heterogeneous network on the PC and various errors occur attempting to print to it Here are Sharing a printer on a heterogeneous network the setups that I have tried the from the Mac Print Browser - gt Windows Printing should use ports - gt Network Neighborhood - gt Workgroup Name-- gt choose-- gt Pc Name- gt user pwd error unable to connect using user pwd given humbug same user pwd works for Files Add Feature to the PC LPD and add IP Printer- gt give lan address of the PC and it gets validated selecting Generic Postscript Device Print- gt select IP Printer- gt shows Starting Job and progress forever nothing being queued on the PC I would assume that Print Shares would be accessed by the GUEST account nbsp

A:Sharing a printer on a heterogeneous network

I can tell you from experience, the problem is on the mac side and it has to do w/ OS X 10.4 Tiger. Upgrade to 10.5 Leopard and I bet it'll work - because I had a very similar situation and it resolved the issues. Hope this helps!
 

http://www.techspot.com/community/topics/sharing-a-printer-on-a-heterogeneous-network.184418/
Relevancy 21.07%

When I got a new printer, I went to my laptop and try the find printer thing when I clicked on it the window pop up and then another one that said "The Active Directory Domain Service is currently unavailable." Please someone tell me what and how to fix this
 

A:Can't use the find printer program thing

Follow the directions that came with your new printer. Usually you have to first install the driver from the included disc or their website, then at some point you're instructed to plug the printer in with USB cable and power it up. It should then be recognized in Device Manager and show up in Control Panel/Printers, where you can set it to your default printer.
 

http://www.techspot.com/community/topics/cant-use-the-find-printer-program-thing.185037/
Relevancy 22.79%

Hi all I Acer update 8935g driver screen GPU blank after recently updated the driver for the Ati card in my laptop during the installation the screen had gone blank and has stayed that way ever since But first heres a back story I started having trouble with the laptop a few months ago when I assume the ati card had overheated and caused the screen to flicker this laptop comes with an Intel card also which you can switch to by pressing the power save button near the keyboard The intel card ran just fine and if I output the video through hdmi the ati card would work fine also Acer 8935g screen blank after GPU driver update which led me to Acer 8935g screen blank after GPU driver update believe that there maybe an issue with the screen Also if I kept pressing the power save button and switching between cards the ati card would eventually begin to work normally on the laptops screen I wanted to update my drivers today as they were a couple of years old I had trouble installing them in the past as there was a conflict between both gpu cards so I became frustrated and left it I used Ati s auto detect tool and it began to install the new drivers when the screen went blank I thought this was normal during a driver update but I left the laptop running and it stayed that way for over an hour So I turned the laptop off using the main power button Probably wasnt a good idea I imagine Now the screen just stays blank even if I try to switch to the intel card Any help on this issue will be much appreciated nbsp

A:Acer 8935g screen blank after GPU driver update

It might be the inverter or the backlight for the LCD. Have you tried using the HDMI output on both cards if the Intel integrated supports HDMI out?
 

http://www.techspot.com/community/topics/acer-8935g-screen-blank-after-gpu-driver-update.184711/
Relevancy 23.22%

does anyone Upgrade acer aspire one d260 battery with a 6-cell or 9-cell battery? I got the netbook with a 3-cell battery and it is dying.
How many hours it last like this 9-cell aod260 battery?
battery4us.com/acer-notebook-batteries/AOD260.htm
 

A:Anyone upgrade Acer d260 power?

http://www.global-laptop-batteries.com/acer-laptop-battery/6-Cell-Acer-Aspire-One-D260-Battery.html

With a 6 cell 5-5.5 hrs. more with conservative settings.
With a 9 cell 6 -9+ hrs. more with conservative settings
 

http://www.techspot.com/community/topics/anyone-upgrade-acer-d260-power.165997/
Relevancy 48.16%

my acer aspire 5520-5908 wont start up. when I press the power button on, it attempts switching on the fan and the fan goes off again with the screen not starting too.and all it does after is the power button light and signals blinking intermittently. I ve removed the battery, plug it directly so forth on and on but nothing seems to work. just blinking of lights.
 

A:My Acer Aspire 5520 won't start

The motherboard has probably failed
 

http://www.techspot.com/community/topics/my-acer-aspire-5520-wont-start.184476/
Relevancy 20.21%

Hi guys I on when KAV60: turned white turned when no image off, Acer LCD is have an acer aspire one KAV mini laptop It was dropped and the LCD panel was broken I used it with an external VGA monitor while the ebay LCD purchased arrived home I didnt use the laptop for month Today the LCD panel arrived I changed it Acer KAV60: LCD is white when turned off, no image when turned on right away But as soon I connected the flex cable LCD panel when On with a white light like if the LED Backlight was connected directly Laptop was turned off when this happens If I turn the laptop On then the LCD panel goes black Led light turns off HD powers on vent powers on power led is on if Acer KAV60: LCD is white when turned off, no image when turned on I plug the AC adapter then charge led is on but no Bios logo at all Like if the BIOS operations where dead at all LCD was used but in good shape as quoted by the seller on ebay Now if the screen was in quot short circuit quot when purchased could this mess up the whole laptop Could a defective LCD panel cause the motherboard to die Or could the motherboard die just becaus it cans and that to be the reason why the LCD panel goes on white light What do you think can be wrong now with my laptop Thanks in advance nbsp

A:Acer KAV60: LCD is white when turned off, no image when turned on

It could be a defective inverter or LCD panel. I would try a new inverter first
 

http://www.techspot.com/community/topics/acer-kav60-lcd-is-white-when-turned-off-no-image-when-turned-on.184380/
Relevancy 22.79%

Hi folks I m new here and not greatly technically minded My Acer Aspire Z laptop has been acting strange for a few days running Windows btw Some of the issues are even happening right now ie as I type the cursor will sometimes restart a new line as if I ve pressed the Return button Acer apps is Laptop and and more opens multiple corrupted This is esp bad in emails and Facebook and often the cursor flies down miles Acer Laptop is corrupted and opens multiple apps and more making it a pain to get back to where I was That s not all though There s a horrible beeping noise when I start up the laptop first thing It goes after I press one of the F buttons The worst though is when I try to open up some app on my desktop and sometimes the laptop goes crazy and opens up multiple other apps software There have been instances where there are dozens of the same pages opening I have McAfee Internet Security and have run Malwarebytes and Spybot but problem is still there Is this a hardware problem do Acer Laptop is corrupted and opens multiple apps and more you think I m not great at techie Acer Laptop is corrupted and opens multiple apps and more speak so please go easy with me but I d be grateful for any advice Cheers David nbsp

A:Acer Laptop is corrupted and opens multiple apps and more

UNless someone else has a better idea, how old is this computer & is it still under warranty? If so, I'd get a hold of the where you bought it & get it checked out. IF you don't & have "other" work done on it, it could VOID the warranty.
 

http://www.techspot.com/community/topics/acer-laptop-is-corrupted-and-opens-multiple-apps-and-more.183988/
Relevancy 21.5%

Hi,
I recently purchased a new kodak esp 1.2 all-in-one printer.
I have a compaq laptop with NIS (Norton Internet Security) connected to a Sky router.
When I set up the new printer it found the router without any problems and I entered the password and established the network connection.
I installed the software that came with the printer and when prompted tried to establish the wifi connection to the printer but it keeps coming back with "printer not detected". I've tried disabling Smart Firewall etc. but don't know what to check.
If my laptop and printer are both connected to the same router / network, what could be responsible for my laptop not finding the printer?
My technical knowledge is very limited so an easy to follow / step by step guide would be incredibly helpful. I've tried to check with the Kodak extended user guides and other Internet searches to no avail. Thanks.
 

A:Connecting a laptop to a printer with Wi-Fi

Use google to find the software for that device and download + Install it.
While you're at it, get the documentation - - especially the quick install guide.

Usually you will need to use the LCD panel on the device to setup the network.
 

http://www.techspot.com/community/topics/connecting-a-laptop-to-a-printer-with-wi-fi.183242/