Windows Support Forum

Solved: which memory slot?

Q: Solved: which memory slot?

I have an IBM T30 laptop which has 2 slots for memory. Which is the primary? I am adding a 512 mb memory module and I want to know which slot should contain the 512 and which
one the remaining 256. BTW, even though I have a 256 in each slot most of the time it only
recognizes a single 256 module. Thanks for your info.

Relevancy 100%
Preferred Solution: Solved: which memory slot?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 63.21%

Hi guys,

I'm working on a windows vista computer that would restart randomly and get a window exception bsod. I took out a memory module and ran memtest86 with memory in slot 1. Failed. Swapped it out with another memory stick but on the SAME slot on the motherboard. Failed.

Took that stick, put it in another slot on mobo. Passed. Took the other stick put in in that next slot, got the restarts again. Could it be that the memory slot that went bad on the mobo also caused the memory stick to go down with it?
 

A:Solved: bad memory stick AND slot?

Yes, that could be possible.
 

https://forums.techguy.org/threads/solved-bad-memory-stick-and-slot.1011709/
Relevancy 61.49%

I put a stick in...(256) and macine only counts it as 128...what gives. I was told PC133...would work in PC100 boards. Was I lied to?
 

Relevancy 61.49%

I recently upgraded my processor amp motherboard from AMD Phenom II X Asus M N T-M Now it s AMD FX- amp Asus M A L-M LX I ran two modules of RAM GB GB on that previous motherboard These are my modules Corsair CMZ GX M A C Vengeance GB Single Module DDR Memory Kingston Value RAM GB don t know the exact model but it was a Mhz always 2nd DIMM Solved: on Memory slot on is hardware new reserved motherboard module Both modules have the same latency I just had to downclock the corsair module to Mhz amp then they both ran in dual channel mode Now on this new motherboard when I check sys info in BIOS it shows just GB RAM or GB basically it Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard just detects what s in the first slot When Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard I boot into Windows it says that GB or GB the other slot is always hardware reserved Also task manager shows wrong RAM speed Instead of Mhz it shows Mhz And when I really run it at Mhz or even below Mhz it s always wrong in task manager There s another interesting thing happening when I try to change the memory speed in BIOS When I change it amp as soon as I hit enter after F system just powers down for a few seconds amp boots right up This is just my second motherboard amp idk if it s normal but it sure doesn t feel right I m posting this after going through a lot of posts on similar topics amp the solutions are not working for me I even checked for bent pins on my CPU but it looks good As it looks either the RAM modules are incompatible on this motherboard but then why is the speed in task manager always wrong or something is wrong with the motherboard This is what I think but I need your help to make it work I m mentally exhausted now nbsp

A:Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard

https://forums.techguy.org/threads/solved-memory-on-2nd-dimm-slot-is-always-hardware-reserved-on-new-motherboard.1153100/
Relevancy 56.76%

yes or no ?? will this have a bad effect on the computer ?/ any info is appreciated
 

Relevancy 53.75%

When inserting memory module on the memory slot it was not aligned properly. When i turn on the power i noticed smoke and i immediatly turned off the power. Removed memory module and half of it was burnt, now my question is the memory slot damaged? Because its slightly burned in the inside slot, could i install a new memory module in that particular slot? or do i have to change the memory slot thats on the mother board?
 

A:Memory Slot

You are probably lucky if you didn't kill the whole board. The slot is most likely toast. If you were brave enough to try another stick in the same slot, it may not work, or it may burn-up something else. I don't think changing the slot is really an option. Motherboards are not exactly repairable items.
 

https://forums.techguy.org/threads/memory-slot.201712/
Relevancy 53.75%

other day my computer made loud long Beeps at Post Google listings said dram problem I normally run gb of ram in a - configuration I removed the card from B and then my system started fine with just one card in A wondered if it was just the card its-self so I placed the removed card into slot A still started up fine with just one card original B card installed in A then I placed other card which was originally in slot A into slot B to be memory bad slot B1??? back to - again back to long Beep at Post again as long as i leave B empty then my system starts fine motherboard manual says i have to have a card in A and B for duel channel to work--- right now i only got gb showing on start up page looked at System Device Manager and found a funny thing no yellow markers shown but -----all my Nvidia nForce bad memory slot B1??? Ware slots bad memory slot B1??? show quot no driver installed for this device quot but under the quot driver tab quot each shows the driver name and version listed driver update wizard for each said quot the correct driver software program was installed quot ran quot scan for hardware changes quot --- found nothing here is list ---Direct Memory Access Controller bad memory slot B1??? High Precision Event Timer nForce Memory Controller listed twice Numeric data Processor Nvidia nForce PCI System Management PCI Standard RAM Controller listed times Programmable Interrupt Controller System Timer all with no driver installed but driver name and version listed under driver tab did go to Nvidia and run their motherboard driver tool downloaded recommend program and after install and reboot no changes is my B ram slot problem a side effect of hinky windows os over time or is it just my motherboard dying of old age power supply old age should i do a complete clean reinstall of Vista ran Repair from my OEM disk which says no repairs needed build data---- P N-D ASUS motherboard GB Western Digital blue SATA HD No-Raid Intel socket Core Duo CPU Nvidia DDR GT GPU OCZ DDR mhz RAM running at GB at present time OCZ watt Power Supply Vista OS i built system in with no major problems until now replaced DVD drive and Viewsonic monitor---both quit working over last few years sorry about the edit have new DVD drive and monitor for awhile nbsp

Relevancy 52.89%

I have been building computers for years and never found a reason for the placement of the memory slots on a motherboard. If you look at a board that uses an Intel CPU, the slots used are1-3 and/or 2-4. If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4. Does anybody know why this is? No, I'm not trying to make a better motherboard, I'm just curious enough to finally ask.

Thanks for any info anyone can give.
 

A:Memory slot placement

'If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4.'

refer to the MSI K9N - which see;

http://www.bosamar.com/K9N/review.html

Dual channel with slots 1/3 or 2/4.

Assuming that you installed 2 Gb in 4 modules of dual channel ram and it is used from byte 0 to 2047 linearly, then assuming that the average 2 Gb ram install running XP uses about 50% of the Ram running avg8 (as example), you would get heating in ram modules 1 and 3 and none to speak of in 2 and 4.

Thus, heat separated components and better cooling.

My opinion.
 

http://www.techspot.com/community/topics/memory-slot-placement.114983/
Relevancy 52.89%

My motherboard just went out on my pc and I was wondering if there is something that I can hook up to my laptop that will let me read whats on my pc memory, kind of a external memory slot or something. I've been searching google for a few hours and I can't find anything and I know you guys always know what your talking about and answer very quickly. Any help would be appreciated.
 

A:External Pc Memory Slot

Your actual data is not stored in the memory, its stored on the hard drive. And it's very easy to connect a hard drive to any other PC, there are many adapters for this.

Here's a version that simply connects a drive, either SATA or PATA(IDE) to a USB port without any enclosure: http://www.newegg.com/Product/Product.aspx?Item=N82E16812232002

Here's a version that basically converts the drive into an external drive that you can safely use that way: http://www.newegg.com/Product/Product.aspx?Item=N82E16817388017
This one only supports SATA hard drive with a connector like this: http://www.google.ca/imgres?hl=en&s...dsp=35&ved=1t:429,r:0,s:28,i:160&tx=102&ty=76

More enclosures to choose from: http://www.newegg.com/Store/SubCategory.aspx?SubCategory=92&name=External-Enclosures
 

https://forums.techguy.org/threads/external-pc-memory-slot.1064760/
Relevancy 52.89%

HEY GUYS GREETINGS i just joined earlier today im seriously in need of help my friend ask me to fix his pc i tried to replace the memory with mb ddr with his original memory mb and a mb of ram just then when replacing it and turning it on i heard a huge quot beep quot then i immediately shut the pc down then when i check it up i saw i slot, help Fried memory quot black spot quot on one Fried memory slot, help of the memory slot i figured it out its fried up luckily the mobo has two memory slot only one of the slot had been fried i replaced the two mb with the original ones the problems now is that the pc is kinda slow in starting up showing the bios and showing a quot blue error screen quot after and sometimes restarting over and over again i really need your help guys really really need it im counting on this site for any help you can give thanks raj philippines nbsp

A:Fried memory slot, help

You not only fried the memory slot, you have damaged the motherboard
 

http://www.techspot.com/community/topics/fried-memory-slot-help.128594/
Relevancy 52.89%

Where is the memory card slot on the Pavilion 550-126?  The slot on the front does not look like the right size.  Is there a way to get a diagram of the front and rear functions?

A:550-126 where is memory card slot

Hi, Very interesting. The following link shows its specs:     http://support.hp.com/ca-en/document/c04875975 It has 7-in-1 multimedia card readerFigure : View of memory card readerSupports the following cards:Secure Digital? (SD)Secure Digital High Capacity (SDHC)SDXCMemory StickMemory Stick SelectMemory Stick PROMemory Stick MagicGateWith Front I/O portsUSB 3.0: 2Headphone: 1Microphone: 1and Back I/O portsFigure : Odense back I/O panelUSB 2.0: 2LAN (Ethernet)HDMI: 2USB 3.0: 2Audio: Line inAudio: Line outAudio: MicrophoneI believe it is at the front but where. What is your card ? Is it on the list above ? Regards. 

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/550-126-where-is-memory-card-slot/td-p/5690390
Relevancy 52.89%

So recently my colleague tried to upgrade the RAM in his laptop, but he ended up messing up really bad he actually broke the only memory slot on the motherboard (yikes!). He asked me to take a look at it for him, and I was pretty surprised how badly he had messed it up (as in there's no way it could be fixed). I told him he might have to replace the entire motherboard, but he really can't afford that right now. I let him know that might be his only option, but I decided to ask here before giving up. The rest of the motherboard is fine; only the memory slot is broken. So is it possible to replace just the memory slot without replacing the entire motherboard? And if so, can anyone help me out with doing this? He does really need his laptop, so any help would be awesome.

A:Broken memory slot

How long can he go without a laptop?
That is a big project. You will need to be a master with a solder gun. Just getting the old part off without melting the motherboard will be an adventure. There are a LOT of pins.

First you will need to find the Brand and model # of the motherboard. You can use CPU-Z for that - it will list the info on the third tab.

Then, armed with that info you will search for the RAM SOCKET replacement. This is where it will get interesting, as the available sources will be in Asia. Shipping will kill you (for a $3 part). And you will probably need some translation skills too.

Your colleague really couldn't afford to mess his RAM Socket up. Now his best bet is to buy a new laptop.

http://www.sevenforums.com/hardware-devices/334046-broken-memory-slot.html
Relevancy 52.89%

I just purchased my computer yesterday. I removed my Sony Memory Stick PRO Duo from my digital camera and was going to download them to my computer. The slot came with a Dell piece. My memory stick is too small. It did not come with an adapter and I have no idea how to get it installed. Any ideas???

A:need help with memory stick slot

It is likely that the two aren't compatible.

What model Dell do you have? The type of adapter that you need depends on what slots your Dell has.

Also - most cameras come with a USB cable. Could you use that instead?

http://www.techsupportforum.com/forums/f217/need-help-with-memory-stick-slot-531472.html
Relevancy 52.89%

Hi,

I have a dell dimension 9200 and the motherboard can handle a maximum of 4gb of ram, but is there a limit per slot?

In other words does it have to be 4 x 1gb sticks of ram or can I use 2 x 2gb sticks?

The reason I ask is that I've had lots of bsod and crashes recently and after performing lots of tests using memtest it seems that 2 of the ram slots on my motherboard are bad meaning I only have 2 good ones to use.

Andy

A:Maximum memory per slot?

RAM Memory Upgrade: Dell, Mac, Apple, HP, Compaq. USB drives, flash cards, SSD at Crucial.com will provide that answer for you.

According to crucial





Quote:
Each memory slot can hold DDR2 PC2-5300, DDR2 PC2-6400 with a maximum of 1GB per slot.

http://www.sevenforums.com/hardware-devices/142569-maximum-memory-per-slot.html
Relevancy 52.89%

I was told by Lenovo that one slot will accomodate 1 gig of memory, instead of using 2 half gig sticks. I was also told about something called "memory boost" as an external memory source to increase memory. has anyone heard of this? I want to run PhotoshopCS and need 1 GIG of memory and don't want to get new motherboard(the machine is long out of warantee). can anyone help on this issue?
thanks, JeffB
 

A:Bad Memory Slot in IBM T30 Laptop

"readyboost" is a feature only available for Vista, where it can use a USB memory stick as an alternative to paging back to the hard drive, it's not really in place of RAM.
 

https://forums.techguy.org/threads/bad-memory-slot-in-ibm-t30-laptop.635364/
Relevancy 52.89%

it seems that the memory stick slot doesnt work anymore. in the device manager there is a yellow question mark and it says that it it not working. i would try installing the drivers but i kinda lost the recovery cd or what not. well before when i bought this, VAIO PCV-RX580, it was using Windows XP Home and now i use Professional. not sure if that makes a difference. im just wondering is there anyway i can get the memory stick slot to work again?

A:MEMORY Stick SLot???

Try updating the drivers from here, search for your memory device.
http://www.sonydigital-link.com/mems...n#ms_downloads

http://www.techsupportforum.com/forums/f10/memory-stick-slot-35672.html
Relevancy 52.89%

This is a hardware question for anyone that can help me out. I have tried to upgrade the ram in a dell dimension 5150, after seating the additional ram one of the existing slots containing ram started smoking with an obvious plastic burning smell. I have removed all ram and the burning is still occurring when powering on accompanied by a loud beeping noise. It's clear that one of the slots is melting. Need to know what my options are now. New board, or can this be rectified. Obviously the slot is now damaged and can't be used but there are three remaining. Never experienced this and unsure what has caused it to happen ? Any help would be greatly appreciated.

A:Memory slot smoking

Please place your system specs, that way we could help you easier.:
System Info - See Your System Specs

The beeping noise, is it a one long beep? Or is it accompanied by another long or short beep?

http://www.sevenforums.com/hardware-devices/288897-memory-slot-smoking.html
Relevancy 52.89%

I have a Tecra Laptop running Windows XP Professional The latptop has two slots A amp B in which you can add MB of memory each When starting Problem Slot Memory up the PC with both modules installed I get the error message quot Windows could not start because the following file is missing or corrupt system drivers pci sys You can attempt to repair this file by starting windows setup using the original setup CD-ROM Select R at the first screen to repair quot I have done as indicated and done a full repair on Windows XP but still get same message I then went to Microsoft Memory Slot Problem com to search the knowledge base According to Microsoft the above message indicates quot This issue may occur if your computer contains a hardware component that is either damaged or is incompatible with Windows XP quot I followed their instructions and it turns out that if I put just MB in memory Slot A the Memory Slot Problem computer starts up fine If I add it in MB in slot B I get the above problem At first I Memory Slot Problem thought it was a bad memory module but if I switch them they will both start up the computer in Slot A when used by themselves So it appears to me that Slot B is the problem somehow Any thoughts or assistance greatly appreciated nbsp

Relevancy 52.89%

Can anyone tell me where the RAM expansion slot is on a MITAC 7521 laptop, I can't find it. DOH!

Thankyou
Darlopie
 

A:Can't find my memory slot !!!

look at the manual or call the manufacturer.
 

https://forums.techguy.org/threads/cant-find-my-memory-slot.335960/
Relevancy 52.89%

I have a Dell Inspiron 6000 laptop and run Windows XP. my memory card slot recently stopped working. I used to be able to insert my memory card from my digital camera and download my pictures and now it no longer works. It doesn't even show up under My Computer under removable storage. Please help!
 

A:memory card slot

Put a card in it and:

Look in Control Panel - System - Hardware - Device manager

Expand the "Universal Serial Bus controllers" and see if a USB mass storage device is listed.

Also look to see no yellow ? or ! are shown, indicating missing drivers.
 

https://forums.techguy.org/threads/memory-card-slot.533573/
Relevancy 52.89%

actually, i was used to a pc with 160mb-ram - which is 32 + 128. now i own a faster one with one single 512mb-slot. but unfortunately, some problems occur: gta3 is collapsing all the time, i cannot copy a normal 1024x768 .tga-image to clipboard via corel (»low memory«) and after watching some freshly downloaded quake3-bots i got the message »low memory«, too. sometimes, even some multitasking surfing can bring me up to fully busy memory - is this a technical problem or am i asking for too much power!? i heard something like this memory-damage would lead to the problems i have.
speaking against it is a rather stable quake3 while in game and a fascinating stable 1nsane played also in 1280x1024 - without any stinky problem.

thanks and regards,
ungua
 

A:¿maybe my memory-slot damaged?

The memory module might be faulty or motherboard might not support 512M modules
 

http://www.techspot.com/community/topics/%C2%BFmaybe-my-memory-slot-damaged.4775/
Relevancy 52.89%

My Hp Pavilion g tx did not pose any problems for years But a week ago I upgraded my RAM from to gb The shopkeeper inserted hynix gb nbsp ddr ram So Can Other... one I ram 8gb 4g in to my slot. upgrade memory ram that makes two rams in my loptop nbsp - Samsung Came when I purchased laptop years ago - gb ddr Hynix b ddr nbsp After a week my laptop stoped working Showing it two service center they said one of my nbsp memory slot is damaged and can't be used nbsp So now I had only one memory slot active with gb ram inside it My Question nbsp is - CAN I INSERT GB RAM IN ONE MEMORY SLOT SINCE OTHER ONE IS DAMAGED nbsp OF MY PAVILION G TX MOTHERBOARD nbsp If yes then please tell me - Of what type of ram should I be looking for Sepecification From where should I buy Crucial got gb ram which I can't usePlease reply ASAP nbsp Thanks amp RegardsPrince Soni

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Can-I-upgrade-my-4g-ram-to-8gb-ram-in-one-memory-slot-Other/td-p/5714534
Relevancy 52.89%

Hi,my name is fajar from indonesiai want to add new memory to my laptop HP 1000-1b09auin CPU-Z, my laptop have 2 memory slot,but, i can't find other memory slot where is the other slot ?  Thanks for help  Best Regards,

A:I Can't Find Other Memory Slot

Hi: If you look at the illustration in chapter 4, page 52 of the service manual, it appears that the memory slots are stacked on top of each other. http://h10032.www1.hp.com/ctg/Manual/c03762978

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/I-Can-t-Find-Other-Memory-Slot/td-p/5655384
Relevancy 52.46%

My Compaq nx7400 has a pop-out tray on the left side, with 4 slots for memory cards - I think ?! I've tried loading an SD card into the tray & pushing the tray in - but without success..... Anyone know the correct way to use this weird plastic tray thingy ?? Thanks

A:How do I use the memory card slot on my laptop ??

Hi, I have a new G72-25OUS laptop, I'm wondering how to use the slot on the left side, that says SD-MS/Pro-MMC-XD? I assume its to put a SD card in from my camera to upload photos, do I just stick it in and if so, how do I get it out? I don't have a manual, didn't come with one and can't find info in the help section. Hope someone knows how to do this. Thanks.  

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/How-do-I-use-the-memory-card-slot-on-my-laptop/td-p/49651
Relevancy 52.46%

How can I upgrade my laptop memory? There isn't a memory slot at the bottom of the laptop.

A:I can't find the memory slot to Satellite S70-B-10V

Memory slots on this notebook model are placed under the bottom cover so when RAM modules must be exchanged or upgraded bottom cover must be removed.
Please note: on some notebook models RAM upgrade is supported by notebook owners and RAM upgrade steps are described in user?s manuals document.

I your case such upgrade is not supported and RAM upgrade should be done by authorized service provider.
Generally speaking bottom cover removal is not complicated but you should not do it alone. This will cancel valid warranty.

In my opinion, before you do anything contact nearest Toshiba service provider in your country and ask for help. Simply pick up some info about price and compatible RAM modules.

https://forum.toshiba.eu/showthread.php?79831-I-can-t-find-the-memory-slot-to-Satellite-S70-B-10V
Relevancy 52.46%

1. Expansion SlotWhat is the expansion slot specification for this model as we would like to add a dedicated graphics card with DisplayPort ? 2. MemoryHow many memory slots does it have on the motherboard ?What type of memory is required ?What is the maximum memory supported on the motherboard ? 












Solved!

Go to Solution.

A:XC-704 Expansion Slot & Memory Upgrade

Ok, Sorry looking up the model at Kingston and a couple other sites didn't show your computer and seeing I hadn't seen any I was confused. Based on what I have found maybe a Model from other country.  With that said it looks like it comes with 2gig DDR3L Ram and is Upgradable to 8Gig Also looks like yours comes With 1 PCI Express x16 Slot. I am not sure with the PSU and with that slot if you would be able to upgrade to a different Graphics Card. GPU and size of case would put a huge limit on what could be able to fit...  James

http://community.acer.com/t5/Aspire-Desktops/XC-704-Expansion-Slot-amp-Memory-Upgrade/td-p/392919
Relevancy 52.46%

Can i upgrade my 4gb ram to 8gb? How many slot does hp 15 g005ax have?

A:hp 15-g005ax maximum memory and slot

Hi, It has: 1 customer-accessible/upgradable memory module slotSupports single-channel memoryDDR3L-1600-MHz Single Channel SupportDDR3L-1333-MHz Single Channel Support (DDR3-1600 downgrade to DDR3-1333)Supports up to 8 GB of system RAM in the following configurations:? 8192-MB total system memory (8192×1) or (4096×2)? 6144-MB total system memory (4096×1) + (2048×1)? 4096-MB total system memory (4096×1) or (2048×2)? 2048-MB total system memory (2048×1) Source: 3rd manual on the following link, page 2        http://support.hp.com/my-en/product/HP-15-Notebook-PC-series/6545564/model/7169754/manuals and the answers: (a) Yes (b) only one. Page 65 of the manual shows you part number and how to install RAM Regards.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-15-g005ax-maximum-memory-and-slot/td-p/5818321
Relevancy 52.46%

i have a N1996 motherboard with two slots for 184pin memory. i have purchased a new module to slot into the second slot but i just get a long beep then the beep stops, then a long beep again etc.
i have just tried the original one in the second slot(on its own) twice, but still the beep. i have put the memory back into the first slot and it works fine.

any help would be grateful

would i need to change the bios setting, or do you think that the second memory bank is down.
 

Relevancy 52.46%

I removed my memory card before ejecting it. Now my memory card slot doesn't work at all. I have done it before and got help on fixing but I can't remember how I did it. It is a readable card and I have tried several different ones so it's not a issue with card itself. The computer doesn't even see I am putting it in. Please help I do a lot of photo's and it's annoying to have find the computer plug everytime I need to get the pictures off.

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Memory-card-slot-not-reading/td-p/5789311
Relevancy 52.46%

Alrighty I m running an MSI K N Neo I ve had it for a while help. coded memory slot Color so far I ve just been running a stick in Color coded memory slot help. the first green slot Someone got me two sticks of to fill out my system I installed them but only recognized g of ram I checked the manufacturer s site to find http www msicomputer com product p spec asp model k n neo platinum a nice diagram about dual and single channel memory that makes no sense to me I believe all the sticks are dual channel they have memory modules on both sides of the ram if that is how you tell I m not sure All three sticks are kingston value ram they are pc all three work as I discovered after some musical chairs with memory I m currently running the two new sticks recognizing g of memory while I have my original stick in a box Can anyone help me out with the diagram or point me in the direction of something more helpful The manufacturer s website has an online tech support page that is under construction I just downloaded the manual but I was hoping for some easy insight Anything would be greatly appreciated at this point Thanks nbsp

A:Color coded memory slot help.

http://www.msicomputer.com/product/p_spec.asp?model=k8n_neo4_platinum

Did you scroll down to the "DIMM Module Combination" and "MSI Reminds You..." and read what is posted there?
 

https://forums.techguy.org/threads/color-coded-memory-slot-help.663643/
Relevancy 52.03%

I just recently purchased a 1gb stick of Kingston ddr400 Ram for my pc.

Currently i have 2 x 512mb sticks in my 1st and 3rd slot of my MB. I currently use the Asus A7N8X-D Board. 3 Memory slots total. What would you suggest me to do for the order of my memory or does it even matter ?

Slot 1 : 512mb
Slot 2 : Empty
Slot 3 : 512mb

Eventually going to be 3gb Memory but Im not the best in these types of configurations.

Thanks ahead of time guys.
 

Relevancy 52.03%

I am using a HP Z400 Workstation Xeon Quad-Core W3565 3.2GHz, 12GB (3x4GB), 1TB, DVDRW, Windows 7 Pro.This the the model with 6 memory slots, so there was a possiblity for 24GB of RAM.  When I populate the remaining slots 4, 5 & 6 with 4GB DIMM, I get errors on boot up for the newly populated slots.  I am unable to configure for 24GB.I did discovered that the DDR3's that I am using are non-ECC.  The system has been running fine with the (3x4GB) setup.  Is the non-ECC preventing the 24GB configuration from working?Thanks for any help you can offer. 

A:z400 - 6 slot memory configut=ration

Yes it is. It is not possible to install standard PC and server memory, I've never seen a system of any brand which supports such a configuration. Officially, the Z400 supports only ECC unbuffered memory modules.However, it will also run with standard DDR3 RAMs, unsupported only means that HP Customer Service won't help you.There are some reports that even 8 GB Modules work, but that's another story, 24 GB runs fine. Mixing different types of memory is generally a bad idea.Use either ECC unbuffered (which is recommended) or non-ECC, preferably six identical modules.DDR3 are relatively cheap, even those with error checking and correction. Good luck  

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z400-6-slot-memory-configut-ration/td-p/5571112
Relevancy 52.03%

Hi, can anyone tell me how to access the second slot in my e-system 1511. I was told it was under the keyboard. I can unclip the clips but there seems to be something else holiding it down. I ve looked at the back and can see no screw with kb next to it to indicate that, that is the screw for the keypad.
Appreciate any advice. I have upgraded the first memory. I ordered 2gb and this came in two of 1gb so I am assuming there is a second slot.
Thanks
 

Relevancy 52.03%

Hi nbsp I recently bought a notebook from HP the HP G with A - processor Inside there was a GB DDR L- Kingston memory module slot with HP u... speed G2 - 355 only Memory on 1600MHz K7H44ES shipped and there are two slots available nbsp I checked with CPU-Z and other tools and it showed a DRAM Frequency of MHz nbsp I added a GB DDR HP 355 G2 K7H44ES - Memory speed 1600MHz only with on slot u... L- Cruical memory module to the second slot and checked again with CPU-Z The DRAM Frequency was just MHz the memory size of GB was recognized correctly nbsp I thought it must be because of two different modules got for testing two other identical GB DDR L- Kingston memory modules and DRAM Frequency was again just MHz nbsp And if only one slot is used with any DDR L- I had available DRAM Frequency was MHz But whenever both slots are used it dropped to MHz nbsp What's wrong Do I need some specific memory modules for this notebook respectively CPU and memory controller nbsp HP Support suggested just that but I believe it's not because of this Perhaps the memory controller is working that way that it drops down to MHz if both slots are used But why should that be With none of my previous notebooks or pc this happened always the memory speed as specified nbsp And Google says that A - has a single-channel memory contoller for DDR L- which would be even faster but instead it runs with nbsp I currently use Windows Pro -bit if this of matter nbsp Cheers

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-355-G2-K7H44ES-Memory-speed-1600MHz-only-with-on-slot/td-p/5801100
Relevancy 52.03%

I have installed the new windows 10 in my PC, before this i had windows 7 home premium. i have a memory card adapter in which i used to slid my micro SD card and was able to access it when i had windows 7, but when i upgraded to windows 10 and inserted the memory card reader in the slot it stopped detecting, their is no action and i am not able to access it.
Please help
System: Dell Studio 1558 2010-11 Model.

A:SD memory card/ Slot not working in Windows 10

Hi Anandani,
Dell Studio 1558 has not been tested by Dell for Windows 10 operating system you will not find drivers for it. However, please use the card reader Windows 7 driver and install it in compatibility mode.
http://dell.to/1IlNMpd
Please let me know if this works.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19646017
Relevancy 52.03%

My printer's memory card slot isn't recognized by my computer. I am running Vista. Can anyone help with this. I contacted the printer's tech support and they tried but said it was a Microsoft problem.

A:Memory card slot not recognized on printer

Welcome sannallett,
Sounds like a tech support answer. What is the Brand and Model of the printer?
In Device Manager under your Printer is there a notification sign?

http://www.vistax64.com/network-sharing/268942-memory-card-slot-not-recognized-printer.html
Relevancy 52.03%

Hi all I am having a strange problem with my PC I have a year old motherboard Leadtek Winfast K nCR D Pro and a new Athlon XP and new x GB corsair value memory - PC slot issue weird Resets sticks My PC is randomly resetting itself even sitting at the bios screen just as though the reset button had been pressed I disconnected all the drives and it still happens I have installed a new PSU and it still happens This is the bit that confuses me I PC Resets - weird memory slot issue have three dimm slots one black two blue for dual channel If I put either of the chips only in the black slot I get NO problems at all If I put either of the chips only in either of the blue slots it randomly resets this happens whether I have a single chip in one of the blue slots or both chips in both blue slots Obviously when there is only one chip in one blue slot the bios does not show dual channel enabled Is there any difference in the way a motherboard deals with the memory in the blue slots which could indicate a problem with the memory or is it likely the motherboard is dying Thanks for your help nbsp

A:PC Resets - weird memory slot issue

Assuming the RAM is correct for your PC go into BIOS and set DRAM or RAM or whatever your RAM is listed under to Auto, reboot and see if that helps. ALso, make sure that you have the RAM in the correct slots for DDR (probably the two blue as you stated).
 

http://www.techspot.com/community/topics/pc-resets-weird-memory-slot-issue.27567/
Relevancy 52.03%

sorry i like to seek your adivce on the following matter

i am using asus P7H55-M motherboard..i was actually using kingston 2x 2GB 1333MHz ram..recently i added 1 nex kingston 1x4GB 1333MHz ram..it was working fine until today when the com could not boot up..when i check, i found burnt mark on the 4GB ram and the memory slot..

my question are:
1) could i replace my motherboard if it is still under warrenty
2) could the burnt mark cause by the mismatching of the ram..
 

A:Burned memory slot on Asus P7H55-M

7ryota said:





1) could i replace my motherboard if it is still under warrentyClick to expand...

I guess so, have you ever tried to establish the communication with the motherboard maker yet? Many of them has it own support lines that can provides the RMA informations.






7ryota said:





2) could the burnt mark cause by the mismatching of the ram..Click to expand...

How? Did you actually force it to be seated in backward position? Look closely at the notch of RAM, they can only go one way, and you can feel the pressure of installing the ram if it goes in wrong way.
 

http://www.techspot.com/community/topics/burned-memory-slot-on-asus-p7h55-m.166579/
Relevancy 52.03%

I m sorry this is so long but please take the time to read it all because I have already taken a LOT of steps to solve this myself I am an IT Professional and have been Memory locks Stick up unless in is Vaio slot since the s The computer I m having the problem with is mine it has always had up-to-date AV and has Automatic Updates on I check it every so often with SpyBotS amp d or MalwareBytes and it has NEVER had anything besides tracking cookies It has been on a secured wireless network out in the middle of nowhere doubt anyone would hack it with both a hardware firewall at the DSL entry point and Windows Firewall on It has never had a Memory Stick in its slot before now The only removable media I ve ever used with it is a big USB disk for backups which unfortunately has not been done Vaio locks up unless Memory Stick is in slot in about months Vaio locks up unless Memory Stick is in slot I ve never had Limewire or any other risky stuff installed on this computer I don t use FaceBook or any of the social networking I don t surf any type of risky sites Vaio locks up unless Memory Stick is in slot and I don t download anything onto this computer Its the safest computer on the planet The computer is a Sony Vaio K-series laptop probably - years old running XP Home SP and IE Here s the sequence of events as best I recall them - everything is fine I m looking up something boring like outboard motor parts Its supposed to storm tomorrow so I am going to unplug it Automatic Updates are downloaded and ready to install so I choose quot Install Updates and Shutdown quot It does its thing in a normal amount of time no indication of problems and shuts down I unplug the charger and put it away - I get the computer out plug it up push the power button It gets to the WinXP logo with the progress bar underneath The bar rotates around a couple times then sticks I wait probably minutes and nothing ever happens I notice the orange light is on beside the quot Memory Stick quot slot I boot it up in Safe Mode That works I check the logs for the Windows Updates everything appears to have went fine Check Event Viewer for some clue as to what happened nothing Check Device Manager no splats Everything looks fine Hmmm maybe a fluke try a normal reboot again Exact same result hangs at same place with orange light on beside quot Memory Stick quot slot So I boot into Safe Mode and uninstall all of the Windows Updates that have the date on them I made sure I did them in the correct order so all dependencies were resolved Tried another normal boot Nope hangs at same place with orange light on beside quot Memory Stick quot slot OK now I m scared So I go to my other PC the desktop and do some Googling of the symptoms I find one in particular a malware-infested Sony VAIO locking up with Memory Stick light on So its probably malware Since I already have the latest version of Norton AV I run a full scan on the Vaio with that Comes up clean Then MalwareBytes latest version comes up clean Then I reboot into Safe mode with Networking Then run Housecall online with Trend Micro comes up clean Just for S s amp G s I even try their New Beta scan clean Then Kaspersky s online scanner also comes up clean Then BitDefender again clean Then as a last resort I disable NOrton s real-time protection and run Combofix Combofix did not find anything I looked through its logs but have to admit I m not that good at fixing something manually I don t know how to interpret Hijack This logs I always give up before then and reformat But I have a bunch of old software that I don t know the registration keys for so I do not want to reformat At this point I kinda panicked and tried Restoring Windows to a Restore Point on That hosed my IE Windows was unable to restore back to the Restore Point that Combofix had just created - So I dinked around with it reinstalling IE and Java Finally got that working again I had read in the post about the malware-laden Vaio that his booted normally if he pu... Read more

A:Vaio locks up unless Memory Stick is in slot

Hello SunBoss

I am happy to report that I have solved the identical problem you describe involving system hang on the Windows XP splash screen and the yellow memory stick light turning on at that point. Similar to your experience I could boot in safe mode but no way to get into a normal boot. As this was a client machine on a limited budget I could not waste a lot of time and contacted the client and got authorization to do a full system restore figuring it would eliminate any software issues (conclusion based on ability to boot in safe mode it seemed reasonable?). Much to my surprise after a full factory restore from the OEM restore DVD the symptom was still there, in fact the restore could not complete because it required a full normal boot to finish the restore. So now I was really perplexed, no way it was software (given that the drive had been fully erased and reformatted), so that only leaves hardware and the memory stick module seemed the likely culprit and on a hunch I tore the bloody thing apart (keyboard, rear hinge cover, and all screws from bottom of the case) which allowed be just enough clearance to get inside and remove the ribbon cable from the memory stick module and presto the problem is resolved and unit now boots normally and I am in the process of bringing the system back up to current standards with all the updates, etc, and have already done multiple reboots with no problems. So I suspect you will find similar results once you go through the difficult task of tearing it apart as our symptoms were identical.

Trust me it has nothing to do with virus or malware activity, it is an actual hardware failure!!

Good Luck

http://www.bleepingcomputer.com/forums/t/235912/vaio-locks-up-unless-memory-stick-is-in-slot/
Relevancy 52.03%

Here s a VERY strange problem Inspiron s w two G DDR DIMMs installed nbsp was up and running when it suddenly turned off with flashing amber SLOT Inspiron Failure? 660s Memory power light and two-beep code indicating memory problem Inspiron 660s Memory SLOT Failure? When power cycled the same symptom occurred flashing amber amp two-beeps Troubleshooting showed DIMM slot was bad Item on p Inspiron 660s Memory SLOT Failure? of User s Manual If either G DIMM card was installed in the DIMM slot Item on p the system would boot OK Both slots populated Flash beep DIMM slot populated with either G DIMM Flash beep DIMM slot populated with either G DIMM Boots OK After quot fixing quot the system by de-populating the DIMM slot full Dell Diagnostics online version were run with all PASS results Memtest passed as well QUESTIONS How could a memory SLOT not memory card suddenly fail in the middle of operation The system was up amp running but nothing was being done on it at the time of failure Did a part of the chipset fail Is there any way to fix this problem short of replacing the MoBo Thanks

http://en.community.dell.com/support-forums/desktop/f/3514/t/19977521
Relevancy 52.03%

When I populate slot2 with 512mb noname ddr1 I cannot boot into windows, BIOS comes up ok and memory tests ok. This is intermittent but now almost 90% of the time it won't boot. slot1 contains a 1GB kingston pc3200.

With no ddr in slot2 it boots ok and with a 1GB stick (corsair) it boots ok. I guess it was the noname 512MB stick but seems strange it passed all the memory tests (from ubuntu grub loader)

MB is an Asus K8S-MX

A:Won't boot into windows with 2nd memory slot filled

hi what happens when you put the 512MB stick in slot 1 and the 1gb stick in slot 2? kinda surprised your running win7 64bit on just 1.5 gb of ram.

http://www.sevenforums.com/hardware-devices/361167-wont-boot-into-windows-2nd-memory-slot-filled.html
Relevancy 51.17%

is the system memory slot basically provided for au003tx is samsung 's 2133 mhz or not? i actually brought this laptop one month ago and am shocked to see the specification tht the memory slot belongs to samsung i can't get to know about that i tried very hardly till now please answer me so that i can do something if i'd been cheatedplease do reply

A:is the system memory slot basically provided for au003tx is ...

@sree_parimi? The slot may have a Samsung memory stick in it but you could install any name brand in it. DDR4-2133 Dual Channel Support (DDR4-2400 bridge to DDR4?2133) Your manual here. http://h10032.www1.hp.com/ctg/Manual/c05228250 REO

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/is-the-system-memory-slot-basically-provided-for-au003tx-is/td-p/5743677
Relevancy 51.17%

I have a Toshiba A S running Windows Vista Home Basic the max memory upgrade is X GB which I purchased via no card 2nd memory recongnition Toshiba A135 slot, newegg com and installed When I turned it on black screen and no boot up Basically it will only reconize one GB of memory doesn t Toshiba A135 2nd card slot, no memory recongnition matter what slot as long as it is only one I tested both memory chips both work in the computer and in either card slot just not both chips in both card slots What Toshiba A135 2nd card slot, no memory recongnition the heck Even stumped the Geek Squad guy at Best Buy he seemed to think it the mother board issue It runs much better on the GB then it did with the MB cha Computer Toshiba A135 2nd card slot, no memory recongnition should be able to run both GB card in each slot and reconize about to of the memory if it would run both cards at the same time I did upgrade the BIOS from to as most of the blogs suggested-still won t recognize the nd GB card nbsp

A:Toshiba A135 2nd card slot, no memory recongnition

cant find your lappy on toshiba site , same thing happened with me and was the bios update i needed so re check its the correct update
have you tried 1x2gb and 1x what you took out??
 

https://forums.techguy.org/threads/toshiba-a135-2nd-card-slot-no-memory-recongnition.939718/
Relevancy 51.17%

(NEWBIE/FIRST POST)I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016).  Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards.  All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer.  I currently have all the latest Windows 10 software drives installed.  Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?

A:Memory Card Slot Not Functioning (Brand New Comput...

I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved.  The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it.  Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you.   But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)

https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Memory-Card-Slot-Not-Functioning-Brand-New-Computer/td-p/3447370
Relevancy 51.17%

I purchased what was described as a 'Dell 3588D Motherboard Slot 1 Dimension
XPS-B' motherboard from eBay. It uses Rambus memory sticks, but has 3
memory slots to fill, while every motherboard of that type I have researched only
has 2 memory slots. In addition, most of the Series B desktops I looked into
seem to be limited to 512MB of memory.
Because my motherboard has 3 memory slots, would I be allowed to insert three 256MB memory sticks, giving me a total memory of 768MB? I'm told that you should
not exceed the required limit of memory. Would someone care to comment on my
predicament?

hextek
 

A:Filling a 3rd memory slot of a Dell B Series desktop

Just try it, it'll either work or it won't work.
 

http://www.techspot.com/community/topics/filling-a-3rd-memory-slot-of-a-dell-b-series-desktop.146470/
Relevancy 51.17%

(NEWBIE/FIRST POST)
I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016).  Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards.  All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer.  I currently have all the latest Windows 10 software drives installed.  Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 











Solved!
Go to Solution.

A:110-151BR - Memory Card Slot Not Functioning (Bran...

I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved.  The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it.  Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you.   But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/110-151BR-Memory-Card-Slot-Not-Functioning-Brand-New-Computer/td-p/3447370
Relevancy 51.17%

ok memory reader card is duo slot? need it help even pro in i laptop possible? stick SD i was bored and got some homebrew for my ds but i needed some files off my psp memory stick and couldnt be bothered to charge memory stick pro duo in laptop SD card reader slot? it is even possible? i need help it as its dead and i cant find the charger so i thauhgt quot ill try it in my laptop sd card slot reader quot and after a some moments later bang autorun pops up with the memory stick icon on it all the files are accessable aswell now my question is HOW DID THIS WORK i looked in the slot and the pins are much to big spaces to fit all the pins on the card everyone know theres a size difference between sd and memorystick how did it work i didnt think there were duel sd and memory stick readers all the usb ones if seen have seperate slots this is memory stick pro duo in laptop SD card reader slot? it is even possible? i need help bugging me as it shouldnt that and i have to get it in just the right place to get it to work it doesnt seem to fit snug in the slot any idea on how the hell this is working thanks nbsp memory stick pro duo in laptop SD card reader slot? it is even possible? i need help

A:memory stick pro duo in laptop SD card reader slot? it is even possible? i need help

https://forums.techguy.org/threads/memory-stick-pro-duo-in-laptop-sd-card-reader-slot-it-is-even-possible-i-need-help.662784/
Relevancy 51.17%

THE ISSUE Hardware issue A broken memory stick slot on the HP Pavilion n DETAILED EXPLANATION I don t know how this happened anyway but the catch on the second slot tray is broken causing one side of the installed memory stick to hang loose and not snap in or fit securely resulting in Windows not registering or recognizing that there is in fact a RAM memory stick actually in the second slot CONSEQUENCE I now have only one good RAM memory slot ACTIONS TAKEN SO FAR Purchased and installed nd RAM memory stick in the problem slot PRODUCT SPECS Memory Type DDR PC slot Pavilion broken A stick the on 753n HP memory DDR PC DDR non-ECC RESULTS Problem still exists Crucial s online scanner and the System Specs under My Computer still reads like below Memory DDR PC DDR PC Memory Type DDR PC DDR PC DDR non-ECC Maximum Memory GB Currently Installed Memory MB Total Memory Slots Available Memory Slots MB EMPTY SUGGESTED ACIONS FROM TECH SITES A Replace the mother board OR B Replace the MB stick that s in the good slot with A broken memory stick slot on the HP Pavilion 753n a GB stick THE PROBLEM A broken memory stick slot on the HP Pavilion 753n WITH B According to Crucial s com s Expert Online Tech where I bought the extra RAM this pc HP Pavilion n is too old and cannot handle a GB stick because it s basically an obsolete pc the OS operating system will be severely affected causing crashes and other instabiity if you put a GB stick of RAM in a slot therefore it is not recommended to put a GB stick in a slot MY QUESTIONS Is he right I ve received both yes and no responses so far but no definitive answer What other solutions are there What s involved in remanufacturing or replacing the board Should I contact HP to get a price quote to fix the issue THANK YOU All suggestions reviewed nbsp

Relevancy 50.74%

So in February I ordered my kid an inspiron as first computer Later slot, card 11- per supposed have memory tag it it doesnt service is to inspiron but I decided to upgrade inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt the memory and I called Dell and provided my service Tag Dell told me it had a GB memory card and I could upgrade to a GB card I ordered the card and disassembled my computer to find there is no slot to upgrade After an hour on the phone inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt I find out inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt that what I am looking at is one with a fixed memory module I told them that per my service tag it is supposed to have a slot and be upgradeable They told me there is nothing they can do So I say how bout you exchange this for one that has what I ordered They say since its over the days there is no way to return or exchange I said even though its your fault Am I being unreasonable All I want is what I ordered After a few more calls to India One person finally tells me there is a first and second generation of this laptop Ist gen has the fixed and the second has the replaceable So I tell them that per nbsp Dell tag nbsp this is supposed to be nd generation and therefor it was built wrong They again say quot we have a day no Hassel return quot and your over that Any suggestions folks I m sick of beating my head against the wall with these people

http://en.community.dell.com/support-forums/laptop/f/3518/t/19992563
Relevancy 50.74%

Hello I have this odd problem in my Dell Latitude D core duo where one of work D520 memory slot Dell doesn't Latitude the memory slots isn t working anymore Just yesterday the Laptop would not startup but lights on the front panel came on Dell Latitude D520 memory slot doesn't work so I suspected a memory issue The D has a slot underneath the keyboard for memory as well as underneath the laptop When ever I put memory in the slot under the keyboard it won t startup I tried various memory known to work I even took the memory from underneath the laptop and placed it under the keyboard because it worked underneath But once I placed the memory in the slots under the keyboard it would not startup I would just get three green lights next to the power key Dell Latitude D520 memory slot doesn't work One stayed the other blinked they all eventually stopped entirely Once I removed the memory it would start up I Dell Latitude D520 memory slot doesn't work tried cleaning the memory slot with an air can I ve never encountered this before For now I just run with gig memory stick underneath the laptop It works fine I am assuming a motherboard issue Any suggestion greatly appreciated nbsp

A:Dell Latitude D520 memory slot doesn't work

Sure sounds like the socket is bad, or the memory controller. You may have to live with a single DIMM in the bottom slot.
 

https://forums.techguy.org/threads/dell-latitude-d520-memory-slot-doesnt-work.1103329/
Relevancy 50.74%

I was wondering as I've got spare slot Mini PCI-Express free on my laptop if such Intel Card ITM could fit inside This technology is quite not expensive actually The mini PCI-E Memory slot on Intel? PCI-Express Mini Turbo Card is very ease to access under Intel? Turbo Memory Card on Mini PCI-Express slot my keyboard and it just have to be inserted and at system reboot Intel? Turbo Memory Card on Mini PCI-Express slot Windows will recognize straight that card and the proper Intel Turbo drivers It does act like quot Windows ReadyBoost quot amp quot Windows ReadyDrive quot under and Vista so the system will load faster boost the disk cache load faster Apps amp perform battery improvement Work on quot Mobile Intel Express Chipset familly quot amp quot Mobile Intel Express Chip Familly quot - gb RD RB no software pinning - gb RD RB no software pinning - gb RD no RB software pinning Any experience in return or it is just like inserting a SD Card in the Card Reader to Ready Boost See also this Post http www sevenforums com general-d robson-pe html EDIT Looks some of you threads seems telling not bothering about gimmick stuff for geek guy That's just annoy me having spare mini Pci-e slot as i won't install an expensive G card I don't need it either

A:Intel® Turbo Memory Card on Mini PCI-Express slot

  
Quote: Originally Posted by NoN


I was wondering as I've got 2 spare slot Mini PCI-Express free on my laptop, if such Intel Card (ITM) could fit inside...This technology is quite not expensive actually.

The mini PCI-E is very ease to access under my keyboard and it just have to be inserted, and at system reboot, Windows7 will recognize straight that card and the proper Intel Turbo drivers.

It does act like "Windows ReadyBoost" & "Windows ReadyDrive" under 7 and Vista...so the system will load faster....boost the disk cache, load faster Apps & perform battery improvement.

Work on "Mobile Intel 965 Express Chipset familly" & "Mobile Intel 4 Express Chip Familly".

-1 gb (RD, RB, no software pinning),
-2gb (RD, RB, no software pinning),
-4gb (RD, no RB, software pinning).

Any experience in return? or it is just like inserting a SD Card in the Card Reader to Ready Boost?

See also this Post:
http://www.sevenforums.com/general-d...robson-pe.html

EDIT:
Looks some of you (threads) seems telling not bothering about...gimmick stuff for geek guy!?!

That's just annoy me having spare mini Pci-e slot, as i won't install an expensive 3G card (I don't need it either!)


With 4 gigs of ram any sort of boost program isnt going to help much since it wont often be used.

ken

http://www.sevenforums.com/hardware-devices/86716-intel-turbo-memory-card-mini-pci-express-slot.html
Relevancy 46.87%

I have a AMD Dual slot video card on my Asus M A X-Evo Motherboard It is installed in the first x slot and I also have a PCI-e x XF-I Titanium Sound card The problem I am having is that one of the x slots is covered by the video card and the nd one is open but right smack below the Video card My Video card is the Sapphire slot Question PCI-e dual below slot card video about GHz Edition non OC Attached is a picture of what I am trying to explain My other question is Will this cause issues since one of the GPU fans is semi covered Its it recommended Last question If I move this to one of the x slots below on my motherboard will it cause my x PCI-E slot to slow down Thanks ahead of time for any help you can provide Computer Specs - Asus M A x-Evo Motherboard AM AMD FX Core Ghz Sapphire AMD Radeon GHz Edition GB GB DDR Kingston HyperX memory x GB GB WD Black Edtion SATA HD TB WD Black Edtion SATA HD Sound Blaster XF-I Titanium PCI-E x Sound Card Thremaltake Bronze PS Smart Series DVDRW SATA DVD-ROM SATA nbsp

A:Question about PCI-e slot below dual slot video card

My opinion ...

Yes, setting up like that will have an impact. The air flow to your GPU will be restricted so it will more than likely run hotter than it did. It may still stay withing recommended specs, but it will run hotter.

The motherboard has onboard sound (Realtek® ALC892 8-Channel High Definition Audio CODEC ), any particular reason why you don't use that? Onboard sound is perfectly good for gaming and the like now, its not like older machines where you needed a dedicated card for decent quality. In my opinion, you only need a dedicated card if you are doing a lot of detailed audio work (mixing, remastering and other specific audio work). This would totally remove the issue.
 

https://forums.techguy.org/threads/question-about-pci-e-slot-below-dual-slot-video-card.1092148/
Relevancy 46.01%

Okay I did something really stupid It was late I was Memory on laptop A215-S7416 MicroSD the Express stuck Satellite slot Card Card my in in the dark and I wasn t paying attention obviously so here s what happened I had a SanDisk GB Micro SD Memory Card that I was using in my cell phone I wanted to transfer some pics amp photos from my computer to the phone so I decided to stick it in the Express Card slot of my laptop Simple enough right Well being the incredibly smart person that I am I put the micro memory card in the adapter but it was the wrong one So my computer pretty much swallowed it whole I can t MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop get it back out Now I can t use the Express Card slot in my computer AT ALL because the old one MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop is still stuck in there You can t really see it but if you try to put another adapter in there it won t quot click quot It won t go all the way because the old one I lost is still in there waiting to be rescued haha So my question is How do I get the memory card out of my computer I tried taking it apart but I couldn t get the part of where the express card slot is so that was no good There s a way to do this I know I m just not smart enough to figure it out on my own Which is probably a good thing because I might mess it up again lol I have a Toshiba Satellite A -S laptop Any help is appreciated Thanks -Ashley nbsp

A:MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop

https://forums.techguy.org/threads/microsd-memory-card-stuck-in-the-express-card-slot-on-my-satellite-a215-s7416-laptop.795517/
Relevancy 46.01%

Hi,

i have had trouble with my computer after cleaning it (can of compressed air) it would boot to log in screen then go black on the monitor or it would blue screen and restart.

after figuring out it was a RAM problem i tried another stick of RAM but same problem so i guess its the actual slot it goes into, i only have 2 on my motherboard lucky one of them is working still.

has anyone had this problem or know of a way to fix it, i am wondering if some of the canned air/gas became a liquid from spraying to close and got in it.

any help would be appreciated thanks.
 

A:RAM slot/DIMM slot? blue screening me!

Hi,

ok so i have been looking into my problem more, when booting i press tab to show the POST?? or somthing and it says that 1 of the RAMs wouldnt/couldnt R/W (read write?? i dont know)

then i get the screen saying that windows has had hardware changes and asking to how i want to start windows (normal, safe mode, etc) i have tried all but it just restarts.

now its only with 1 of the 2 dimm slots this happens and i have tried differend RAM in there but only the 1 slot works

any help would be appreciated

thanks.
 

http://www.techspot.com/community/topics/ram-slot-dimm-slot-blue-screening-me.152835/
Relevancy 46.01%

hi there,
i need to know which know which graphic card will fit for my computer. Ie i want to know which type: DDR ,DDR1 or ddr2 i bought my computer in 2007, but thats not enough to tell.
so please let me know how do i know which pci slot i have?
 

A:which graphic card slot do i require for my PCI slot

The type of memory doesn't matter, its the type of interface the computer supports among a few other things to watch for.

You likely have a PCI-Express slot, as long as it a x16 slot it doesn't really matter if its a version 1.1 or 2.0 slot.

Is this for your Dell or another computer? Whats you budget and what needs do you have for the video card?
 

https://forums.techguy.org/threads/which-graphic-card-slot-do-i-require-for-my-pci-slot.921803/
Relevancy 46.01%

ok the lady I got this comp from says the comp the video card its reading now is not as good as the one in the PCI slot so Im wondering how do I make it so it reads the PCI slot

The AGP vid card though comes out with a Adaptor to make it so you can plug in moniters

Anyway Should I leave my moniter plug in the AGP slot video card or put it where no video card is but goes right into the computer

and no there is no plug that goes into the PCI slot

I hope this is understanable

thanks
 

A:How to switch the comp from reading your AGP slot to PCI slot

Jimboson said:

Anyway Should I leave my moniter plug in the AGP slot video card or put it where no video card is but goes right into the computer
Click to expand...

That's known as integrated graphics, now do you have a PCI video card and an APG video card or an Integrated video card and an AGP card?

Also what are they Radeon xxxx? or Nvidia xxxx? we need to know the model numbers to tell you which is the better on to use.
 

https://forums.techguy.org/threads/how-to-switch-the-comp-from-reading-your-agp-slot-to-pci-slot.594580/
Relevancy 46.01%

This is the strangest thing I've seen in the past years of using computers I have an Acer Aspire - laptop that came with windows but I'm very picky and I wanted Windows xp back so I went onto Acer's website and won't mouse USB slot USB first other in works any slot, in only work but USB downloaded all of the windows xp drivers and then formatted the laptop to Windows XP with intergrated Service Pack The computer works just fine except for one very strange oddity - the USB mouse I'm using only works when plugged into the first USB slot it will refuse to work in the other USB slots I'm using a Microsoft Intellimouse Explorer USB which is my favorite mouse and I USB mouse only works in first USB slot, but won't work in any other USB slot have of them at home When I was formatting the laptop USB mouse only works in first USB slot, but won't work in any other USB slot I had the mouse plugged into the first USB slot and now that is the ONLY slot it will work in If I plug it into the other usb slots the red laser will come on which means it's getting power but it will not move the cursor and clicking either of the mouse buttons won't do anything When I have the Device Manager open and I plug the Microsoft Intellimouse Explorer mouse into the first USB slot the 'Microsoft Intellimouse Explorer ' entry will appear in BOTH the 'Human Interface Devices' tab and also the 'Mice and other pointing devices' tab However when plugging the mouse into the other usb slots the 'Microsoft Intellimouse Explorer ' entry will only appear in the 'Human Interface Devices' but NOT the 'Mice and other pointing devices' tab I could just go about my business using the first usb slot for the mouse but this little strange problem is pissing me off hugely as I might want to switch the mouse to another USB slot based on how I have the laptop positioned on a desk or other surface I should also note that the 'Human Interface Devices' tab has a 'HID compliant device' entry in it that isn't present on my desktop computer and my mouse works on any of the usb slots on my desktop computer I wonder if this is the problem I tried disabling this entry but it doesn't help any A final point to note is that I have many other usb devices such as flash memory sticks camera card readers external harddrives gps devices and they all work perfectly fine no matter which usb slot they are plugged into Very strange indeed Is there anyway to make my mouse work in any of the other USB slots

A:USB mouse only works in first USB slot, but won't work in any other USB slot

Hi NukesGoBoom,

I have seen a similar problem, but it was all USB ports that weren't working.

First, check the BIOS to make sure all USB ports are enabled, which they probably are.

Are all drivers installed and up to date? Do any yellow question marks or exclamation points show up in Device Manager?

-Coolfreak

http://www.techsupportforum.com/forums/f10/usb-mouse-only-works-in-first-usb-slot-but-wont-work-in-any-other-usb-slot-513250.html
Relevancy 44.72%

just received my new stream 11.  have barely unpacked it yet! quesition: I know that there's a slot for a memory card - I almost never use a camera, so I'm not totally familiar with that technology.   Can anyone tell me what kind of card goes with that slot?  What's the maximum capacity? thanks! w











Solved!
View Solution.

A:which card should I buy for the memory card slot on HP strea...

Yes, that will work. -wes

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/which-card-should-I-buy-for-the-memory-card-slot-on-HP/td-p/4834450
Relevancy 44.29%

yah just a question, and if so give me a price range please for a pci

thanks
 

A:can I add a AGP slot or PCI slot to a comp that doesnt have one?

You can't add a slot to a motherboard.

How old is this computer that it doesn't have a PCI slot? Those have been around for quite a while. Are you sure it doesn't have one? Even AGP is not new technology.

EDIT: After seeing your other thread, are you asking if you can purchase an AGP or PCI video card? That's a totally different question, and the answer would be yes depending on which slot your motherboard has. How much it costs depends on what you plan to use the computer for. A simple one is cheap, and high-end gaming cards can get expensive.
 

https://forums.techguy.org/threads/can-i-add-a-agp-slot-or-pci-slot-to-a-comp-that-doesnt-have-one.591093/
Relevancy 43.86%

This should be an easy one...

My PCI-e x1 slot is covered by my graphics card. Can I install a PCI-e x1 card into a PCI-e x4 or x8 slot, since they are in the clear?

S~
 

A:Solved: PCI-e x1 in a PCI-e x4 x8 slot

Absolutely, you can use a PCI-Express card in any slot that it'll fit into, any extra pins in the slot will simply not be used, that's one of the cool features of PCI-Express.
 

https://forums.techguy.org/threads/solved-pci-e-x1-in-a-pci-e-x4-x8-slot.1074766/
Relevancy 43.86%

I have a Dell Studio 540 with one pcie x16 slot, two pcie x1 slots and one pci slot at the bottom that is about the size of the X16 and is colored white. It sits about a half inch closer to the rear than the other slots. Can anyone tell me what this is for? Thanks...
 

Relevancy 43.86%

A short time back I installed an AGP duo video card, I took it out to install in new system.
Now the old systems onboard video doesn't work. Any help here.
 

Relevancy 43.86%

Appreciate some assistance.

Have a Gigabyte GA-6BA Mainboard with an AGP slot. However, for the time being, would like to install a video card on a PCI slot instead of on the AGP slot.

Although the AGP video card is the best choice, is it possible to install a PCI video card instead, or will this cause problems?
 

A:[SOLVED] AGP Slot

Yes you can and no it won't!

You can run your system off a PCI video card if you want. Your system checks first to see if the AGP slot is used, if not, it will check for onboard and PCI connections. Once you insert a card in your AGP slot, then your system will automatically use that, and ignore the onboard and PCI cards, unless you utilise an OS that will allow multiple Monitors and graphics cards.
 

https://forums.techguy.org/threads/solved-agp-slot.55032/
Relevancy 43.86%

:ee
i have one pci slot and one isa slot , my nic onboard mobo wont work
how can i use this one pci slot for video, sound and nic card ?

system info
PII 350,pcchips mobo
11gb hdd 256mb ram on one slot ;other 2 not working
nic with bell on it
bye
pcmenon
 

Relevancy 43.86%

how can i tell if i have a pcie 2.0 slot if mobo doesn't tell
 

Relevancy 43.43%
Relevancy 43.43%

I'm using a ASUS Sabertooth 990fx R2.0 motherboard. Onboard sound doesn't seem to work so I bought an inexpensive PCIe sound card. (Which works great ) problem is that in order to install the sound card I must displace the graphics card to a different slot than ASUS's recommendation. Which of the other PCIex16 slots should I use? And what problems should I be prepared for in the displacement of the graphic card. I don't need the graphics as much as I do the sound. So I could stand to take a hit in performance of the GPU. I am open to to any advice or suggestion. You guys are the best of the best! Thanks in advance for any response!
 

Relevancy 43.43%

priviously i ws using vista n evrything ws ok but i switched to windos 7 dan my sd card slot stopped working along with my scroll button in my laptop....whats wrong?????
 

A:Solved: sd slot not working

Do you have problems in Device Manager? Have you installed the needed drivers from the manufacturer's site?
 

https://forums.techguy.org/threads/solved-sd-slot-not-working.1059612/
Relevancy 43.43%

I recently found out about different types of slots (pci, pci express, etc), and i was wondering what kind i had, what with christmas coming up and santa needing to know what kind of video cards my compy is compatible with

So, i see 3 small white slots, and one slightly longer black slot. I know that the white slots are PCI, so what is that long black slot?

edit: it's not a ram slot
 

Relevancy 43.43%

Hi People,

I have an old Dell Dimension XPX T600 PC. I want to upgrade the cpu. However its a Slot A. I'm told that I don't have to upgrade the entire slot, just the cpu. How do I do this?

Also, what is the max cpu my slot A pc will take.

Thanks,
Kappy
 

Relevancy 43.43%

Can my PCIe x slot have a Bad PCIe Solved: slot??? problem that causes it to not work with Solved: Bad PCIe slot??? my video card driver but still give a video output with Windows generic VGA driver Details I have been having video problems for a while now With my video card in my x Solved: Bad PCIe slot??? slot I get no input to my monitor after Windows loads my video driver This happens with XP and Vista Everything worked fine immediately after building the machine but not after I replaced the IDE optical drive with a SATA one I thought that caused the problem somehow because at the time I hadn t installed an ACHI driver with Windows After a bunch of troubleshooting including installing XP with the AHCI driver and Vista I am at the point where XP is reinstalled with just the IDE DVD drive I switched the card to my x slot and it works with the driver installed System details as shown at icon above nbsp

Relevancy 43.43%

Hi everyone I m having the strangest problem It all started days ago when I booted the machine but defective? PCI-E Solved: the Is slot it wouldn t get passed the Windows welcome screen the glowing colored windows After a couple hours of thinkering with no luck I decided to unplug everything and move the box to the kitchen table I restared it all with as little peripheral I could Simply a monitor and a PS- keyboard Not even a mouse It still would not get passed the welcome screen I thought I would remove some internal hardware harddrives and such To get to those drives I had to remove the GPU Nvidia GTS MB Having now the card in my hand I thought I Solved: Is the PCI-E slot defective? should test Solved: Is the PCI-E slot defective? the system without it since Solved: Is the PCI-E slot defective? the motherboard is equiped with On-Board graphics That GTS is quite a few years old and might just be defective I start the machine and lo and behold it boots normaly to the desktop I thought quot Yay It s simply the GPU quot I then quot borrow quot a GeForce from my HTPC which is less than a year old and in perfect working order and install it in the PC The machine boots to the desktop but it is very unstable When closing programs the screen will shut down The machine seems to still be up and running but there is no video feed going to the monitor I force shut down the PC and go back to On-Board graphics and all is fine No odd behavior no nothing After a week of running with the On-Board GPU without so much as a hiccup I decided to reinstall the GeForce back again After just a few minutes opening and closing random programs such as Firefox E-mails and such the video feed stops going to the monitor I m beginning to think the PCI-E slot is defective By the way I checked the slot using the old trick with the credit card and the sticky tape and it seems fine Hardware is MB Asus P H -M LE CSM CPU Intel i RAM GB X Monitor Viewsonic VX Running Up-to-Date Windows Family Premium -bits If you have a different theory I would love to hear it Thanks for reading all this Oh One last thing In case of a virus I threw everything I had at the PC That includes MS Security Essentials SuperAntiSpyware and Malwarebytes Antimalware They did not find anything wrong Also graphics are always running with the latest drivers YoungBob nbsp

Relevancy 43.43%

In 2003 my Compaq was a state of the art computer with AGP,Pen4.

I installed a AGP graphics card back then(in 2003). I am thinking of upgrading my computer to a new graphics card however i notice most AGP cards require AGP 2.0.

How do i know if my Computer has a AGP 2.0 SLOT?
 

Relevancy 43.43%

Is there a way i can plug a pci-e based sound card into my spare x16 slot?
 

Relevancy 43.43%

I've googled around for diagrams, but haven't found any that I feel comfortable with before I start prying it out with a hammer and chisel.

Does anyone have any instructions for removal? I've only installed them, never had to remove one
 

Relevancy 43.43%

hey everyone! been a while since i posted, real buisy. my dilema is this. i placed an sd card in the slot of my pavillion to add some pics for one of those picture frame w/ sd card and h.d. so it plays a slide show on the end table. well i inserted the card in the slot, the light came on,saying it was in the slot but the computer never saw it. i clicked on each individual drive (f,g,h,i,j) but it dont see it.so i removed the card and the light stayed on. what is the deal? i may just be a dope, but i dont know. i updated the drivers and looked at the device mgr. and it said it was working properly??????????? i dont get it.
 

Relevancy 43.43%

Hi, I have 3 extra slots in my Motherboard and have a PC with 1 GB of DDR Ram which was replaced by this, im just wondering will the DDR ram work in a DDR2 slot?

Thank you.
 

A:Solved: DDR RAM In DDR2 Slot?

Hey,

No it will not and don't try it!

Nick.
 

https://forums.techguy.org/threads/solved-ddr-ram-in-ddr2-slot.578438/
Relevancy 43.43%

Tech Support Guy System Info Utility version OS Version Microsoft Windows Professional bit Processor Intel R Pentium R CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card Standard VGA Graphics Adapter Mb Hard Drives C Total - MB Free - MB Motherboard ECS Alhena Antivirus AVG Anti-Virus Free Edition Updated and Enabled Hi I m having a strange problem with this motherboard http h www hp com bizsupport TechSupport Document jsp lang en amp cc us amp objectID c I currently have gb of RAM but decided that to be able to run more memory intensive programs I would buy another gb of RAM The spec says the motherboard can hold gb of RAM I put the new gb of RAM RAM Broken Solved: slot? that Solved: Broken RAM slot? is the same speed DDR and all that But when I started the computer Solved: Broken RAM slot? there was a short beep followed by a long beep I thought the new RAM might have been faulty so I tried it on its own and it worked perfect I then put the RAM into the second slot which I think is faulty and the same beep sequence happened and the computer wouldn t start Could this be because of a faulty slot Thanks nbsp

Relevancy 43.43%

I just bought a new video card for a computer in out bar, and I didn't notice that the computer's AGP slot is 4x max. (It is in a tight area, so it is one of those compact compaq desktops)

The card is an 8x AGP card and the slot is apparently 4x max. Is there a way to get this card to work in this computer? A 4x AGP low-profile video card with dual monitor output is hard to find at all, let alone something with decent RAM.

I don't remember the model of the computer off hand...I'll reply with that later. Video card is a geforce 4 128 MB DDR low-profile 8x AGP, dell part number F1811.

Thanks,
Mike
 

Relevancy 43.43%

The SD Card slot on my Gateway computer running Windows Vista does not read my SD Card. I need help, if anyone knows what the problem is thnks!
 

A:Solved: SD Card Slot

We can't tell what the problem is without any info.

Are you sure the card works?
Is it new? Does it have data on it?
Are you sure the card reader works? You've used it successfully before?
What exactly are the symptoms? Error message? Doesn't appear in Computer as a drive letter? Access denied error?
 

https://forums.techguy.org/threads/solved-sd-card-slot.655036/
Relevancy 43.43%

This may be moot point when I open my computer up, but I'm installing a new graphics card and am trying to get all my ducks in a row before I start. How will I be able to tell which PCI slot is the PCI Express slot or are they all the same?

Thanks
Peg
 

A:Solved: PCI Express slot

No they are not all the same. The PCI express 16 slot is usually the top slot. It is usually the one with the old video card in it. If it does not have a card in it. It is the one at the top with a little latch at the back of it.
 

https://forums.techguy.org/threads/solved-pci-express-slot.539935/
Relevancy 43%

When I get one computer working another one has to stop working Last year I wanted to build a computer using very out-dated computer parts except the keyboard mouse and monitor I installed Windows SE amp Windows Everything was working until about a month ago For some strange reason all a sudden I m getting a floppy error even if the floppy is disconected and a quot Keyboard locked - Unlock key switch quot error I cant get into the BIOS or boot to windows because the keyboard is locked and the computer freezes If Solved: Gateway 1 Slot motherboard I unplug the keyboard I can start Win k because it s the default OS I plug the keyboard in after windows starts but the keyboard doesn t respond The mouse moves but cant click What s strange is a couple hours before I had these problems I was reading about how computers used to have switches to lock the keyboard and mouse System Specs Gateway E motherboard Slot PIII processor MB PC RAM GB IDE hard drive MB graphics card PCI Soundblaster ISA card nbsp

A:Solved: Slot 1 Gateway motherboard

I still have an old Gateway slot 1 machine I keep around to play with from time to time.

The 1st thing I would try is to remove the CMOS battery for a few minutes so BIOS will reset. If you can access BIOS after it resets set the time and choose the default BIOS configuration, save and exit.
 

https://forums.techguy.org/threads/solved-slot-1-gateway-motherboard.904562/
Relevancy 43%

EVGA NVIDIA nForce 680i

Does this motherboard have a slot/support for a 2.0 PCI-E x16 slot? This is such a lame question, but thanks for your help.
 

Relevancy 43%

hi

I was wondering if a Mini PCI wifi card will work in a PCI express slot?

if someone could please let me know that would be very helpful

Thanks
 

A:Solved: Mini PCI in PCI express slot

Nope. PCI and PCI-Express are two completely different interfaces. Mini PCI-Express cards also will not work in a regular PCI-Express slot on a desktop computer, you would need an adapter card and the cost more than a PCI-Express Wifi card.
 

https://forums.techguy.org/threads/solved-mini-pci-in-pci-express-slot.1117838/
Relevancy 43%

Hi I m confused I am looking to expand my computer tower s in slot PCI-E at x1 Solved: Will eSATA a 6.0gbps run capabilities so as to have an eSATA external port I have found a card at http www ebay co uk itm -eSATA- ltDomain amp hash item bba b ht wt This has raised a couple of questions from the specs they give Stable and reliable chipset ASMEDIA ASM Compliant with Serial ATA Revision specification Compliant with Single-Lane x PCI Express specification revision Data transfer rate up to MB s Gbps Supports Gbps PCI-E bus with full duplex channel Supports two independent SATA channels Supports SATA devices at the same time Will this Controller Card run at maximum speed if plugged into a PCI-E x slot I have a Gigabyte GA- -DS Rev mobo with F BIOS I seem to be Solved: Will eSATA run at 6.0gbps in a PCI-E x1 slot going round in circles within Google Forums etc and wondered if there are any definitive FAQs which would further my understanding of SATA SATA-II SATA-III and eSATA nbsp

Relevancy 43%

I posted this once before but didn't get it solved, so I figured I'd post it again:

I have a HP Pavilion ze4365us computer. I recently wiped the hard drive clean, and installed XP Pro (it came with XP Home). I got all new drivers from HP for everything. But the PCMCIA slot still won't work. When I plug my external wireless card into it, the card lights up, so I don't think it's the card, but the computer won't recognize the connection. Not sure what to do about the issue. It's kind of annoying, considering my internal card is busted also.

If you don't know how to solve this problem, then maybe you can recommend an alternate way of connecting wirelessly to the net. I have two USB 1.1 ports, and a firewire port.

Thanks anyway,
Danny
 

Relevancy 43%

Couldn't find anything right away in google, and a friend needs to know this: can a PCI card work in a PCI express slot? He has a Quad-core G5 Mac that only has PCI Express x4 slots (maybe one x16 for the graphics card) and wants to order a card that only comes in PCI not PCI express. Would he be able to?
 

A:Solved: PCI card in PCI Express slot?

No, it won't work. But he might have a spare PCI slot that he could use, although since PCI-E cards are so much faster than PCI I don't why anyone would want to do that.
 

https://forums.techguy.org/threads/solved-pci-card-in-pci-express-slot.605921/
Relevancy 43%

Chaintech CT- VJD MB I m putting in two MB sticks of PC and upon putting teminator in the SDRAM slot as the MB manual says there is not room for the in slot The terminator sticks out and over the slot http www tomshardware com motherboard via kt - html pic has terminator in slot I put terminator in SDRAM but the system only sees MB instead of the G actually installed Can the terminator in wrong slot cause incorrect amount of being seen or is there something else I need to look at Jumper is set at mhz Also would a different brand of terminator work on this Chaintech This PC is hours away up the Hill country and I d like to figure out what to do before going back to get it lined out This PC is for limited photo editting so it s no big deal except trying to explain to y o Dad why he spent extra on RAM he can t use Thanks for the help nbsp

Relevancy 43%

I recently wiped my hard drive and reinstalled windows xp pro. Now, I have an ExpressCard slot that is not picking up my external wireless card (my internal wireless doesn't work). The card is a belkin g+ mimo, for which the drivers and interface program are installed. I reboot the computer with the card attached, and a window pops up and says "we cannot detect the card . . ." So how do I get my computer to recognize this expresscard slot, and what's inside it? my computer is an hp pavilion ze4300 with windows xp pro, amd athlon.

thanks
danny
 

Relevancy 43%

This is from my computer's spec sheet:

PCI-Express 2.0 x4 (mech. x16) 1 x using x4 notched connector
PCI-Express 2.0 x8 2 x
PCI-slots 1 x
Slot Notes PCI 32/33 MHz, 3.3V, full-height slot with low-profile-option available

What does this tell me about the type of graphics card I can use?
 

Relevancy 43%

It's not showing signal! Onboard vc works fine. But added a vc to motherboard vc slot and no signal display! I disable the onboard vc and still no signal. Help pls!