Windows Support Forum

Computer Freeze/Crash. Weak processor? Because case fan is unplugged? PLEASE help.

Q: Computer Freeze/Crash. Weak processor? Because case fan is unplugged? PLEASE help.

Hello guys I m gonna get straight to the Freeze/Crash. unplugged? help. fan Computer is Weak PLEASE Because case processor? point Computer Freeze/Crash. Weak processor? Because case fan is unplugged? PLEASE help. I have a custom rig I bought roughly Computer Freeze/Crash. Weak processor? Because case fan is unplugged? PLEASE help. a year ago that had been built for two weeks It s still a pretty great build here are the specs I m not very great with technical stuff but Computer Freeze/Crash. Weak processor? Because case fan is unplugged? PLEASE help. I can get by Windows Home Premium AMD FX- Quad Core Processor RAM AMD AE G U GB DDR PSU Antec HCG- M Motherboard Gigabyte A-D GPU XFX Radeon Hd HDD WDC WD EARX- N YB ATA TB SSD OCZ-AGILITY ATA GB So I mainly produce music on this rig and if my session gets really really full sometimes the system will just freeze and I have nothing to do but a hard reset I ve had to hard reset hundreds of times at this point this has been going on for months but the system works BEAUTIFULLY most of the time Oddly enough there have been times where it crashes with just the browser open but that is very rare I don t understand why this thing is crashing I have cleaned all the fans but the side case fan It s an Enermax Ostrog case is unplugged This is where I may have an issue with overheating during stressful times on the CPU Is that correct The fan has male female molex connectors coming out but I don t have anything to connect those to directly without an adapter in my rig I don t think The thing is I bought this a while ago with my friend and he helped me set it all up he had the fan going before but had to unplug it one time and I never knew how to get it going again Pretty embarassing Anyway I noticed the sysfan small pin connection and I am wondering if I just need to purchase a molex to small pin adapter for the fan to work Then hopefully some of my issue will be resolved Any advice on that would be very appreciated I am not sure if my processor is overclocked either It very well may not be I have CPU-Z and HWMonitor but don t really know how to use them If it was done it may have been done in the BIOS but I really have no way of knowing some of this stuff and my buddy sort of abandoned me so he can t help me anymore Sorry for my lack of coherency and structure but let me know what other info I can give to you because I literally can t even play battlefield for more than mins on my rig and I can t have massive sessions going on in Cubase or Pro tools anymore nbsp

Relevancy 100%
Preferred Solution: Computer Freeze/Crash. Weak processor? Because case fan is unplugged? PLEASE help.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Computer Freeze/Crash. Weak processor? Because case fan is unplugged? PLEASE help.

https://forums.techguy.org/threads/computer-freeze-crash-weak-processor-because-case-fan-is-unplugged-please-help.1113707/
Relevancy 13.33%

After going through lots of programs and cleaning out an infection, I restarted it and it is almost totally unusable. I can confirm that both mouse and keyboard work, mouse light is on, and keyboard lets me open the calculator. Any help please? Thanks.
 

A:Can't move my mouse, but computer is not frozen

If the mouse is USB (not a PS/2 connection), try disconnecting and then reconnecting. You could also try a different USB port for the mouse.
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.183253/
Relevancy 13.33%

Hi, I have decided to buy a new computer(or the parts for one).
It will be the first time I assemble one so I would like a little
help from the people on here that has some experaince with computer hardware,
because I myself do not know very much about it.

I have done some research and this is what I came up with:
Motherboard : Asus Z97-A Intel Z97 4xDDR3 SLI CrossFireX Socket 1150 ATX
CPU : Intel Core i5-4460 3.2GHz Socket 1150
RAM : Crucial Ballistix Sport DDR3 DIMM PC12800/1600MHz CL9 2x4GB
GPU : Gigabyte GeForce GTX 750Ti OC 2GB D
PSU : CORSAIR PSU 550W VS550
Hard Drive : Western Digital WD20E, 2TB, SATA 6 Gb/s, 3.5", IntelliPower, 64MB

What I want to know is if all these parts will fit together and if it is a good
computer? I want a fast computer thats good at a bit of everything. What I will be using it for mostly is programming, games like bfbc2, downloading/watching movies/tv series and just browse the internet.

And I think I will be using mint as my os(still new to linux).
 

A:Assembling a computer for the first time

I think those are great choices.
 

http://www.techspot.com/community/topics/assembling-a-computer-for-the-first-time.217526/
Relevancy 13.33%

I just bought these I will return them if need be so don t pamper me http www newegg com Product Product aspx Item N E Question one these Questions about computer speakers speakers plug into my old jack front speaker port on my mobo should I use the center sub-woofer port instead Should I have bought some kind of HDMI or SDPIF speakers instead If so how much better are they My video card nvidia has extra hdmi ports my Questions about computer speakers mobo has a spdif port Should I buy sound card speaker combo Is my mobo and or video card just as good as a good sound card Should I download some software to compliment my new speakers Do I need to change any settings on my computer to take advantage of them In the control panel should I up the quot quality quot from bit hz studio Virturilze sound Boost enhance Will loudness equalization hurt my coolness nvidia g gaming http www newegg com Product Produ e nvidia g gaming- - - - - -Product Mobo z m pro http www newegg com Product Produ amp cm re z m pro - - - - - -Product p s my old speakers were like years old I don t even see where to adjust the bass p s s I use my speakers for music and gaming ps was trying to spend on a speaker upgrade flac is wow nbsp

http://www.techspot.com/community/topics/questions-about-computer-speakers.217390/
Relevancy 13.76%

Memory is a key component in any computer and without a sufficient amount on tap, the entire system will feel sluggish regardless of what other beefy hardware you might be running.

Read more
 

A:How much RAM is in your computer?

16GB... Because I love keeping numerous Chrome tabs open.
 

http://www.techspot.com/community/topics/how-much-ram-is-in-your-computer.213529/
Relevancy 12.9%

Just checking it seems like something is not wife's on this - my Keyboard - - found disabled getting computer of EPP tired still wrong on this computer just using a standard plain usb keyboard All of a sudden this morning when she was changing a plain ordinary mouse the keyboard quit working it works on Keyboard not found - EPP - disabled - getting tired of this on my wife's computer another computer the mouse works while using the same usb port in device manager there is no entry for Keyboard in devices and printers way down at the bottom a quot usb multimedia quot keyboard shows but when I try to look at the drivers there are several drivers and I cannot delete or disable any Looking at the HID compliant consumer control device driver details there are no drivers Device Manager Keyboard shows keyboard there are speed settings but in the hardware tab no name manufacturer location or device status Just in case with all of the problem we have had lately I did some scans the dss scan seems strange Is it mbam Windows Service Pack x NTFS Internet Explorer Motherboard FOXCONN Keyboard not found - EPP - disabled - getting tired of this on my wife's computer AB Processor AMD Phenom tm II X T Processor CPU mhz Disk Partitions C is FIXED NTFS - GiB total GiB free D is FIXED NTFS - GiB total GiB free E is CDROM F is Removable G is Removable H is Removable I is Removable J is Removable K is CDROM M is NetworkDisk NTFS - GiB total GiB free P is NetworkDisk NTFS - GiB total GiB free R is NetworkDisk NTFS - GiB total GiB free S is NetworkDisk NTFS - GiB total GiB free T is NetworkDisk NTFS - GiB total GiB free Something is rotten in Denmark nbsp

A:Keyboard not found - EPP - disabled - getting tired of this on my wife's computer

Some place I saw a message that windows updates was set to no update hareware files, but I can't find where to change that.
 

http://www.techspot.com/community/topics/keyboard-not-found-epp-disabled-getting-tired-of-this-on-my-wifes-computer.191043/
Relevancy 12.9%

I have scoured the internet for months, and I couldn't find anything. I even checked an old article from this website, which didnt help. I have tried most obvious things, such as disabling stereo mix, though and help at all is accepted because you never know. Thanks.
 

http://www.techspot.com/community/topics/turtle-beack-x12-replaying-computer-sounds.216239/
Relevancy 13.33%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 12.9%

I heard there's some certification to mount ESD safe equipment (ESD mats, etc) at computer workshops and other ESD safe environments. Could I get this certification myself in London? Is it expensive?
 

A:Is there some certification to mount ESD safe equipment at computer workshops, etc?

See https://www.esda.org/
OR domestic (U.S) http://www.dekra-certification.us/en/electrostatic-discharge-esd
 

http://www.techspot.com/community/topics/is-there-some-certification-to-mount-esd-safe-equipment-at-computer-workshops-etc.214706/
Relevancy 12.9%

So I'm building a coomputer for my first time and have already selected parts that I think would be good. Not sure though as this is all new to me, but basically I just want a good computer capable of running a flight simulator in high quality graphics. So I just want to make sure that everything is compatable with each other, and if you have a part that would be better than what I have listed, please recommend. The list of parts I have come up with are as follows:

Case: Xigmatek Soundwave ATX Mid Tower

Power Supply: Cool Power Performance CP P600 204 pin ATX Power Supply w SATA PCIe & Dual 12V Rails

Mobo: MSI ATX DDR3 2133 Motherboard 970 Gaming

CPU: AMD FX 4350 Unlocked Quad Core Processor 4.2 4

RAM: Corsair Vengeance 8gb (2 x 4gb) DDR3 1600 MHz PC3 12800 240-Pin DDR3 Dual Channel Memory Kit

Optical Drive: Asus 24x DVD-RW Serial-ATA Internal OEM

Audio Drive: Asus Xonar DG Headphone Amp & PCI 5.1 Audio Card

Video Card: MSI GTX 960 Gaming 4G

Hard Drive: Western Digital Caviar Blue 500gb SATA III 7200 RPM 16mb Cache Bulk/OEM

Then I will be installing Windows 7 Home Premium.

Thanks Guys!
 

A:Are these parts sufficient for a decent gaming computer?

Give us your budget.
 

http://www.techspot.com/community/topics/are-these-parts-sufficient-for-a-decent-gaming-computer.214561/
Relevancy 27.95%

Evening, all

I bought an interesting little Single Board Computer as an mITX motherboard (a WADE-8020, more info at the link below):

http://www.ebay.co.uk/itm/Portwell-...766?pt=LH_DefaultDomain_0&hash=item3a9b75151e

I have another similar board in an old Hoojum Cubit 3 case, and was wondering if anyone might have any other suggestions for a similarly eye-catching case, probably ready-made, though I'm not averse to either buying a DIYed case, or maybe trying to make one myself (I have a Dremel but not much else, and that includes skill )

Cheers, Jon.
 

http://www.techspot.com/community/topics/case-suggestions-for-industrial-mitx-board.213745/
Relevancy 13.33%

ASUS ROG G751JY-DH72X Intel i7 2.40GHz 32GB Memory 512GB SSD GTX 980M 4GB Laptop

Windows 8.1
Intel Core i7 4860HQ 2.4GHz
32GB Memory 1TB HDD 512GB SSD
NVIDIA GeForce GTX 980M 4GB
17.3-inch (1920 x 1080)
Retail Price:
$2,999.00
Price:
$2,749.00
 

A:Is the CPU good on this computer for gaming?

I'd say it's a good CPU, but note that you won't be able to upgrade it in the future as it is soldered onto the motherboard.
 

http://www.techspot.com/community/topics/is-the-cpu-good-on-this-computer-for-gaming.213433/
Relevancy 24.94%

AMD is poised to make quite a comeback if a leaked slide proves accurate. The slide in question details AMD's Zen core APU and Greenland HBM memory-powered graphics and arrives courtesy of Fudzilla.

Read more
 

A:Is AMD's 16-core 'Zen' processor real? Leaked slide provides details on stout chip

This chip looks amazing, and is certainly enough for AMD to make a huge comeback. I really hope this is true.
 

http://www.techspot.com/community/topics/is-amds-16-core-zen-processor-real-leaked-slide-provides-details-on-stout-chip.211380/
Relevancy 39.13%

Angry!!!Last week I bought a mobile phone named HTM ?and the model of the phone is XH292W.

But when I receive this phone, it seems the quality is not good, although phone?s functions are complete,it has 5MP camera?1GHZ dual core? but it always delay to running.

I searched some info about it on the Internet. Someone said that the phone is producted by a OEM named Wingtech?But I never heard about this OEM . Do you know?

Now, I wanna returned goods.And buy other one.

Who can help me to recommend a mobilephone? Thanks a lot???

PS.Never buy HTM's mobilephone .
 

A:The HTM phone is really weak burst

What's HTM? Is that GrayHandset copy HTC?
 

http://www.techspot.com/community/topics/the-htm-phone-is-really-weak-burst.200803/
Relevancy 13.33%

I have a HP Pavilion Elite m9600t CTO Desktop PC that has 2 drives. One which clearly says it can do lightscribe and burning, however, everytime I try to burn a disk using any software(I've tried a couple) it says no drive that can burn was found....

Config Flags 0x00000000
It's kinda driving me crazy to the point where I'm not sure if I'm wrong or its wrong. Here are the drives I have:

Drive 1

Spoiler
ATAPI DVD D DH16D3S
Device ID IDE\CDROMATAPI_DVD_D__DH16D3S____________________SH12____\4&A9C04EF&0&0.1.0
Status 0x0180200a Started
Problem 0x00000000 (0)
Service wd
Capabilities 0x00000000
Class CDROM
Manufacturer (Standard CD-ROM drives)
Drive 2

Spoiler
WJWDG UBKDE3C5U3 SCSI CdRom Device
Device ID SCSI\CDROM&VEN_WJWDG&PROD_UBKDE3C5U3&REV_1.03\5&36E5972&0&000000
Status 0x0180200a Started
Problem 0x00000000 (0)
Service cdrom
Capabilities 0x00000060
Config Flags 0x00000000
Class CDROM
Manufacturer (Standard CD-ROM drives)

 

A:My computer can't burn disks?

They both appear to be ROM drives when reading the spoiler info.

The best I can tell, here is the "ATAPI DVD D DH16D3S" which is a ROM drive.

http://www.newegg.com/Product/Product.aspx?Item=N82E16827106262
I can not find the second listing with the details provided. I'm assuming that is the drive pictured in the screenshot.

HP Pavilion Elite m9600t Desktop PC Product Specifications




Primary Optical Drive

Must select one of the following options:

16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA
Blu-ray player & SuperMulti DVD burner with LightScribe Technology
SuperMulti Blu-ray Disc burner with LightScribe Technology
​Click to expand...

There is lack of detail on HP's site as to which specific drives were used. The drive you pictured is not Blu-ray, so I'll assume the first listed drive is the one you have. The drive may need to pulled out of the case, to find out for sure which unit was used.
 

http://www.techspot.com/community/topics/my-computer-cant-burn-disks.212153/
Relevancy 13.33%

I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
 

http://www.techspot.com/community/topics/computer-will-not-power-on-after-i-moved-it.212377/
Relevancy 11.61%

I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp

A:I can hear "computing sounds" from my computer, through my speakers

Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
 

http://www.techspot.com/community/topics/i-can-hear-computing-sounds-from-my-computer-through-my-speakers.202182/
Relevancy 28.38%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 13.33%

As the title implies I m currently having issues the first major issue is that my PC is turning on off and which the second is that my other hard drive suddenly up and Issue Invisible & HDD Computer Grounding disappeared on me My computer started to turn on and off on me for no reason while I was trouble shooting my initial problem of the HDD when I fiddled around inside my case Eventually ripping everything out of the case and quot card-boarding quot the motherboard which it worked and stayed on and as I gradually put everything back together it was all good until I sat the motherboard back onto the brass copper studs that sits inside the frame and screwed it in At that point my computer started to turn on and off again which lead me to believe it s some manner of a grounding issue Computer Grounding Issue & Invisible HDD I have no clue on what to do at this point about going about this should I just get a new case made of plastic My current full tower case is all steel While I was watching a movie which was stored on my second hard drive is started to freeze lag repeat all that good stuff on me It froze my computer up completely and I was force to hard reset the computer when I booted my PC back up I found that my second hard drive had up and vanished on me So I went into my bios and saw it quot working quot I switch to ACHI to see if it ll make a difference but I got a BSoD so I left it at IDE At that point my computer gave me the option to quot repair windoe files quot or start normally Both options made my computer get stuck on the loading screen thankfully safe mode boots up fine So what could had caused this and how may I go about fixing it nbsp

A:Computer Grounding Issue & Invisible HDD

I also swapped out the PSU with a spare I had lying around, didn't get any power from it so I reused my old one. Now I don't have power from that one either. So besides the "missing" HDD and a suddenly a "no longer working PSU "I'm assuming the motherboard is bad, opinions?
 

http://www.techspot.com/community/topics/computer-grounding-issue-invisible-hdd.211499/
Relevancy 26.66%

Hi so I bought a PC about months ago and I love it It so far has been basically able to handle anything I can throw at it Though keep in mind I haven t tried that many strenuous activity though Keep Is PC? my GTA for good enough Processor 5 in mind Is my Processor good enough for GTA 5 PC? I am asking this question because I know nothing about PC s I bought mine pre made just picked a good but affordable one a friend said was good My processor is a Intel Core i - hq GHz Cores Now to my question Being a huge GTA fan I of coarse want to pick up GTA on PC when its drops So I checked the recommended Systems Specs and I seem to meet every requirement but I was unsure about the Is my Processor good enough for GTA 5 PC? Processor This is the recommended processor for play GTA on Pc Intel Core i - GHz didn t talk about cores Below are two links The one to my computer I want to play this game on and a link to the required system specs for this game As I mentioned Mostly want to know if my processor can handle it but It would be a great help as well if you could just check my specs and the recommended specs and see if everything fits or passes these recommenced specs Sorry If I offened anyone with just downright dumb questions as I said big Computer novice Thank you for your help Reccomended Specs http www game-debate com games index php g id amp game Grand Theft Auto V My Specs http www newegg com Product Product aspx Item N E nbsp

A:Is my Processor good enough for GTA 5 PC?

Check out the following website: Can you RUN It ; Follow the directions and it will tell you. Grand Theft Auto V is on the list of games to check your system against.
 

http://www.techspot.com/community/topics/is-my-processor-good-enough-for-gta-5-pc.211286/
Relevancy 13.33%

Okay so I am having an issue working out if my case will be able to hold my motherboard and graphics card Case Details Available Color Black Materials Steel body plastic Dimension x x mm x x inch (I Computer Building my First setup) changed W x H x D Net Weight kg lbs M B Type Micro-ATX ATX quot Drive Bays exposed quot Drive Bays exposed hidden quot Drive Bays hidden I O Panel USB x int USB x Mic x Audio x supports AC HD Audio Expansion Slots Cooling System Front mm fan x optional or mm fan x Building First Computer (I changed my setup) optional Rear mm black fan x pre-installed Side left mm or mm fan x optional Side right mm fan x optional Building First Computer (I changed my setup) Power Supply Type Standard ATX PS EPS V optional Maximum Compatibility VGA card length mm inch with HDD cage CPU cooler height mm inch Now Ill list my other parts I have They should Building First Computer (I changed my setup) also be links if they are not links just search the name WD quot Green TB WD EZRX SATA M RPM HDD Patriot Signature GB Kit Gx DDR - - PSD G KH Samsung SATA x Black DVD RW Gigabyte N - GI N SL- GL DDR GT PCI-E VGA Card Intel BX G Pentium G GHz MB LGA ASRock H M Anniversary Motherboard nbsp

A:Building First Computer (I changed my setup)

From the case details you have supplied (Motherboard type: Micro ATX or ATX and maximum video card length of 320mm) you are well within the parameters of having everything fit.
ASRock H97M motherboard is a Micro ATX board.
Gigabyte N730-2GI video card is 185mm in length.
 

http://www.techspot.com/community/topics/building-first-computer-i-changed-my-setup.210947/
Relevancy 26.66%

Actually what happened is I opened my cpu to clean out any dust so I cleaned it and even cleaned under the processor with a dry cloth.but when I tried to turn on the pc when everything was arranged,a black screen with a paragraph of error is shown.turns off the pc automatically.
My motherboard is fine,it shows a green light in the extreme end.
My processor is working great.
Hard disk is also fine.
But still it is not turning onn. Please help.
 

A:Processor Problem

Did you happen to have disconnected the power cable from the computer and press and hold the power button to discharge any built up static charges before opening and cleaning inside the computer?
You mentioned you cleaned under your processor. Did you pull the processor from the motherboard or was it still attached when cleaning?
Did you re-check ALL wires and connections? Try disconnecting all cables (to motherboard, hard drive, optical drive, video card, etc.) and then re-connecting said cables, making sure they are firmly seated.
Any chance you can take a photo of the error message and post it here?
May I suggest next time do not use a dry cloth, because you can actually build up static charge within the cloth itself and you could have discharged the built up static electricity into (or onto) one of the computer components.
 

http://www.techspot.com/community/topics/processor-problem.210948/
Relevancy 26.23%

I have an Emachines D525 laptop. I have the specs listed below. I need help because feel that it could run faster if it was given a better processor to run on. I would like to know what processors I could upgrade to. Thank you!

Processor: Intel Celeron CPU 900 @2.20 GHZ, 2194 Mhz
RAM: 3.00 GB
OS: Windows 7
BIOS: Phoenix Technologies LTD V1.16

Anything else needed, please let me know!
 

A:Emachines D525 processor upgrade

You can change your hd for ssd at least 100 GB . Buy a case for external HD, and use the original hd of her machine, as the same external hd . replace the memory of 1 GB for a 2 GB . Your D525 will be very fast.
 

http://www.techspot.com/community/topics/emachines-d525-processor-upgrade.167686/
Relevancy 26.23%

Hi,
I want to learn how to manage ARM processor power management with LINUX (for example the Cortex-A53 MP Core).
Can someone recommend literature, a tutorial or web based information?
Thank you in advance
Manfred
 

http://www.techspot.com/community/topics/arm-processor-power-management-with-linux.210897/
Relevancy 13.33%

I have done some research and have not found a solution to my problem.

I plug in my HDD (Fantom Drive, Green Drive) and I hear the 2tone sound when I plug it into my USB2.0 port.
My computer then searches for a driver. It decides a suitable driver for what I plugged in is called "Initio Default Controller". I got this information from the Device Manager.
I have looked in my "computer and right clicked "manage". The HDD is not listed. I have used more than one USB cord, ports, and 2 different computers with the same problem.
Both the computers are running windows 7 64bit. One is a laptop (ASUS) and a desktop(HP).

Can someone please help me with this problem.

Thanks,
Chris&Dawn
 

A:External HDD not recognized by my computer

So I said the facts but I never mentioned exactly what the issue is. sorry.

When I open my computer when the external HDD is plugged in, it's not there. I can't save files in it, open anything, it's just not there.

Also the icon that pops up that lets you "remove hardware safley" in the bottom right is not there. Also the external hard drive does not show up on any programs like "Defraggler" or "Speccy"

Thanks,
Chris&Dawn
 

http://www.techspot.com/community/topics/external-hdd-not-recognized-by-my-computer.176212/
Relevancy 12.9%

With Broadwell and Skylake desktop CPUs expected to launch next quarter, the urge to upgrade my computer has never been stronger.

Read more
 

A:Weekend Open Forum: What CPU powers your computer?

Got an i5-2500k in my gaming computer, and a C2Q Q8200 in my home server. Because of the small enclosures they are in I have not overclocked them, with the watercooled 2500k being in a Prodigy case stuffed to the gills, and the Q8200 is in a 2U rack case.

Not sure about the server, but I know with Star Citizen in the distant horizon, I'm very compelled to upgrade around the end of the year. This is driven less by my CPU and more by my graphics card (watercooled GTX 570) and memory, which I only have 8GB.

edit: oh yeah, and my XPS 12 has an i5-4210.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-cpu-powers-your-computer.208477/
Relevancy 12.9%

A factory AMD or Intel heatsink is something I simply won't consider when building a computer. I acquired my first aftermarket cooler 15 years ago to assist in overclocking an AMD Athlon 500 (it reached 800MHz with help from a...

Read more
 

A:Weekend Open Forum: What heatsink / water kit cools your computer?

Mine is water cooled. Except instead of liquid its solid. And instead of water its aluminum. And instead of a pump its got a fan. Its actually a laptop.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-heatsink-water-kit-cools-your-computer.209240/
Relevancy 21.93%

The $35 Raspberry Pi 2 launched earlier this month sporting a wealth of upgrades and apparently, one of the most peculiar hardware bugs in recent memory.

Read more
 

A:Weird bug alert: A simple xenon camera flash can crash a Raspberry Pi 2

Wow.
Reminds me of what a big solar flare could do.
 

http://www.techspot.com/community/topics/weird-bug-alert-a-simple-xenon-camera-flash-can-crash-a-raspberry-pi-2.208723/
Relevancy 28.38%

Hey guys,

I am in love with the CM Stryker case however its fulltower so its rather big.

Does anyone know if I can get a similar case in medium size?

Thanks! ( Yes I tried googling already )
 

http://www.techspot.com/community/topics/case-like-cm-trooper-stryker-but-smaller.209005/
Relevancy 27.09%

Hi there I ve been having issues with my PC lately and have been looking for a place to ask them I hope you guys don t mind Firstly my PC is awfully slow It isn t very noticeable until I play a flash game or something similar Instead of running like it should the speed is decreased dramatically - levels which take one minute to go through take me at least three Now I ve always known that my PC is slow but after seeing that it s that bad I ve decided to make an upgrade I ve tried to keep track of different components and the worst one appears to be my CPU At standby it processor? better need Do I a usually runs at around - and when I launch a browser audio editing software or a game Minecraft in my example it immediately Do I need a better processor? jumps to I m forced to keep my setting to a minimum for it to function The CPU I have is an Intel Do I need a better processor? Pentium GHz chip with GB of RAM usually at Do I need a better processor? around - even when busy I have GB of free hard drive space Also for two years now in the winter months my PC randomly freezes and crashes when running a high-demand program for a while I ve always shrugged it off to overheating my PC is right next to a radiator but now I m really starting to worry about permanent damage I really want to get this solved quickly if possible and would really appreciate any advice you can give So does my CPU need upgrading Or is it possibly my GPU My graphics card is ATI Radeon HD series and I believe it s dedicated though I m not exactly sure By all standards it seems to be good enough at least so I m blaming the CPU for now Am I correct Thank you in advance for any help -Mike nbsp

A:Do I need a better processor?

I think you are jumping the gun on this. You've mentioned the fact that the PC is next to a radiator so you need to put that right. Secondly, like a car, a computer requires some maintenance. You need to keep the inside of the tower clean using something like an air duster can. The hard drive needs to be defragged occasionally unless it's SSD. Do you run the Windows Clean up utility to reclaim wasted space? Programs starting up with Windows that you aren't using cause a further drain on resources. A free utility that can be downloaded called CCleaner makes it easy to check that out. As the hard drive fills up things slow down so are there programs you can uninstall or stuff you can save elsewhere? See if things run better after you've followed up these suggestions.
 

http://www.techspot.com/community/topics/do-i-need-a-better-processor.208009/
Relevancy 12.9%

Hi all. I've got this issue with my graphic card (fresh and crispy by the way - 1 month old). Few days ago I was just browsing web when suddenly blue screen came out of nowhere on my Windows 8.1 desktop PC. Ever since then when computer boots screen is filled mozaic-like with green squares, after few seconds it's changing to vertical lines. Obviously Windows window manager won't open at all, and it greets me with black screen. After I deactivated graphic card, and switched cable to main boards VGA port computer runs ok.

I've seen some similar threads on techspot suggesting that due to escessive dust 'consuption' GPU can overheat and irreverisbly burn therefore. Is it possible that the same thing occured here?




 

A:Green squares on computer boot, Nvidia GTS 250

It's what I've seen on the screen when one of my graphics cards has died. As it's almost new changing it shouldn't be a problem. It's more likely to be a faulty graphics card than dust. Double check that it's seating properly in its port and that the video cable is OK.
 

http://www.techspot.com/community/topics/green-squares-on-computer-boot-nvidia-gts-250.208163/
Relevancy 25.8%

Hi my name is Rafael of Brazil, rode a computer gamer very good, the settings I put down. My CPU is theoretically very good, but I can not play with it, the cooler that comes with the processor does not maintains the temperature when the BF 4 game with full graphics of 50 fps, but a few minutes later he shuts down and restarts in the middle of the game I think the manufacturing cooler's fault, because he goes from 100 degrees (HWMonitor), I will put an exhaust fan and I'm thinking about changing the cooler, am among the Hyper 212 EVO and H60. What would be better to cool off without the need for overclocking.
 

A:A10 6800k processor with factory cooler. Hyper 212 or H60

I would like someone to help me, which of these coolers is better. Hyper 212 EVO or H60?
 

http://www.techspot.com/community/topics/a10-6800k-processor-with-factory-cooler-hyper-212-or-h60.207197/
Relevancy 26.66%

Hello someone know if the I7 3820 is working with a graphic card pci-express3.0?
 

A:Processor compatibility

Check your motherboard specifications.
 

http://www.techspot.com/community/topics/processor-compatibility.207381/
Relevancy 13.33%

I recently bought several Dell Optiplex GX computers online for repair I usually do a thorough review of what I am getting but this was a a with VGA Help DVI-D on port computer monitor using a cheap deal on a big lot and a few things slipped by me For one it takes a special power cord that I can t find for less than and there were none Help using a VGA monitor with a DVI-D port on computer with the lot I ordered one to test them with for now but that is not my main problem but if anyone knows where I can get those DA- adapter power cords any cheaper please let me know where My main problem is that these are the small form factor cases so they have no card slots I am dependent upon the motherboard options only So here is my problem the only connector for a monitor on the back of the computer is for a DVI-D which would be great if I had monitors with those connections The only connections I have on my monitors are the VGA I bought some adapters from e-bay that were supposed to convert the DVI port to the VGA which the connector did but I have no screen using this adapter and I am thinking that I was cheated Can this even be done this way I have always just changed the video card but this computer has no way I can see to do that it is all in the motherboard Does anyone know what I can do here I put a fresh install of io xp pro on several of then since that is what they came with They only have pentium s with hyperthreading and single core processors and I didn t think windows would help any If anyone knows what I can do to use these VGA monitors please tell me because without being able to put a video card in it I am lost sincerely cableman nbsp

A:Help using a VGA monitor with a DVI-D port on computer

Your best bet for Global spares is www.pchub.com.

As to the DVI to D-Sub you did the right thing in buying an adapter. It should work period. Did you get the joblot from eBay? Was it sold as untested? Are the PCs even powering on? Maybe there are issues with memory/cpu/motherboard....

http://support.dell.com/support/edocs/systems/opgx620/en/ug/A02/solve00.htm#wp1286323

Yes you have to be very careful when upgrading the CPUs for this unit as they follow a narrower roadmap. Top line CPU would appear to be a Pentium D3.4Ghz which worked in a GX620 usff with bios revision A11.

Good luck!
 

http://www.techspot.com/community/topics/help-using-a-vga-monitor-with-a-dvi-d-port-on-computer.172534/
Relevancy 13.33%

My computer is being running slow and is choppy also, I'm making sure the system is clean right now.
 

A:Computer slow and choppy

Problem solved, runned some anti-malaware programs and cleaned my computer.
 

http://www.techspot.com/community/topics/computer-slow-and-choppy.207403/
Relevancy 12.9%

I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
 

A:Windows 7 computer says connect via ethernet and ping confirms but cannot get to any page

Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?

NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew

Give this a sec or two.

Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it

If none of the above work go into the device manager. under control panel type: device manager. click on device manager

-Network adapters
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)

Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC

Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
 

http://www.techspot.com/community/topics/windows-7-computer-says-connect-via-ethernet-and-ping-confirms-but-cannot-get-to-any-page.207373/
Relevancy 13.33%

Hey , I am not good at computers
plz help me to choose the best and cheap graphic card for my computer
the details of my computer are:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name PAWAN-PC
System Manufacturer WIPRO
System Model MS-7267
System Type X86-based PC
Processor Intel(R) Celeron(R) CPU 2.80GHz, 2792 Mhz, 1 Core(s), 1 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. V17.21B6, 9/10/2007
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name pawan-PC\pawan
Time Zone India Standard Time
Installed Physical Memory (RAM) 1.00 GB
Total Physical Memory 0.99 GB
Available Physical Memory 211 MB
Total Virtual Memory 1.99 GB
Available Virtual Memory 921 MB
Page File Space 1.00 GB
Page File C:\pagefile.sys
 

A:What's the best and cheap video card for my computer?

I don't think that GPU will make any difference in your 'rig'
 

http://www.techspot.com/community/topics/whats-the-best-and-cheap-video-card-for-my-computer.207332/
Relevancy 12.9%

When I am playing a video with any browser it is very choppy (sound and video).
Even Window sounds are choppy. It seems like if I move the mouse it gets worse.

Computer is very slow to open programs, even though the system idle process
is at 99% before starting another progam. This happens even when no browser is open and the
anti-virus software is disabled.

I don't know is this is a software or hardware issue.
 

A:Computer very slow. Choppy video and audio playback from browsers

Post this here:
http://www.techspot.com/community/forums/virus-and-malware-removal.28/
See if they can help with this problem
 

http://www.techspot.com/community/topics/computer-very-slow-choppy-video-and-audio-playback-from-browsers.207159/
Relevancy 12.9%

Hello all,

I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
 

A:How to change the Wifi password of an ADSL modem without a computer

Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
 

http://www.techspot.com/community/topics/how-to-change-the-wifi-password-of-an-adsl-modem-without-a-computer.207093/
Relevancy 13.33%

I need a computer that can handle video editing, mainly Final Cut Pro and Adobe Suite. Right now I have a 5-year-old MacBook Pro that can't manage FCP let alone run any programs smoothly and quickly. I can't afford a MacPro, so I've been considering iMacs. What's my cheapest option that will get the job done? I've heard you can buy PCs and install Mac OS. Would that be my best option? (Having PC capabilities would be awesome, for light gaming). I want to save money but I don't want to buy anything that isn't equipped to handle video editing well (cause then I'm just wasting money). I want to stick with Mac OS, but I don't care about the design or whatever, so I'd happily get a PC and put Mac on it, but I don't know how I would go about doing that. So if you have any suggestions or advice, please let me know! Thanks!!
 

A:Buying new computer/OS for video editing

What is your budget (how much can you spend) for this new computer?
 

http://www.techspot.com/community/topics/buying-new-computer-os-for-video-editing.207058/
Relevancy 13.33%

I have been thinking about buying a really good Gaming Computer, and now I have no idea which computer or specs to actually get. I want something cheap but don't mind expensive. I also heard that custom built computers are better than already engineered computers. I was checking out http://www.ibuypower.com/Store/Intel-B85-Configurator but like I said I don't know what specs to get for this computer. I want a computer that can support any game like any call of duty, minecraft, LoL, WoW, etc. and maybe posting videos on YouTube or others. Please help and thank you for your attention.

Please comment the specs
 

A:A good gaming computer

That is a good place to have a computer built as far as specs go there is no computer specs that have to be met, a good PSU is good in any machine, a reasonable mobo is needed in any machine. I prefer ASUS but they will be the highest if top of the line. if u are going to overclock make sure it is over clockable and make sure the processor is over
clockcable and yes they both have the ability, although the board will just put the # down. any video card will play games, but the newer ones should give u more frames, and last longer. as far as the processor AMD or Intel will be fine. and that site will e-mail u if the MOBO and processor will not work together.
 

http://www.techspot.com/community/topics/a-good-gaming-computer.206756/
Relevancy 12.47%

Printer Problems in Windows XP sp3
Dell Personal Printer all in one A940
After trying to speed up an older computer running Windows XP
I may have cut off the Print Spooler (or it was already off ?)
I went back to Services dialog box & selected Print Spooler
I clicked the "Start" link at left of service list & got a message tgat said
"could not start print spooler service on local computer error 1068 The dependency service or group failed to start."
Printer is still not working can anyone help?
 

A:Could not start print spooler service on local computer error 1068

On Win/7 the dependencies are

HTTP

Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Manually start each on and set to AUTOSTART as you go.
If one fails, then that is the root problem.
 

http://www.techspot.com/community/topics/could-not-start-print-spooler-service-on-local-computer-error-1068.206839/
Relevancy 12.9%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
 

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
 

http://www.techspot.com/community/topics/seagate-external-hard-drive-not-showing-up-in-my-computer-it-is-detected.205926/
Relevancy 28.38%

Hey guys I was looking at case suggestions mini-ITX redoing a build as a mini-itx so it would be more in the question to carry it somewhere if need be This is my alternative to getting a laptop as a primary mini-ITX case suggestions computer and ill be gettiing some sort of cheap portable tablet laptop for college work So I was looking for mini-ITX cases that would be best for my situation Alot of them are cube-like and im not a fan I would prefer something that I could put my xbox on top or vica versa Not that id definately be doing that but thats generally what form factor I want I also need to be able to fit like at most a GTX in it I know thats asking alot but alot of the cube cases can do mini-ITX case suggestions it all mini-itx cases ive really seen are too slim or to cube like and that makes it feel clunky to move anywhere Id really like to have the most efficient PC case possible Ive got a corsair c build right now and it just doesnt work at college as well as id want Oh yea my budget is at max Looking further im starting to think I won t be able to get a build small enough for what im looking for and I guess thats understandable I guess I should say my PSU budget is so it either needs to support a normal PSU or have a smaller one in that price range and wattage amperage that can run a non overclocked i and a GTX nbsp

A:mini-ITX case suggestions

I am doing a second mini-itx and the case does not seem to be working. the first case is no longer available - I posted pics here - it was all acrylic/clear - over the long term, it turns out that the acrylic broke at the power-on button and where the power supply meets the back of the case.

You might want to look at some that are for video - they have a low, flat profile like a DVD player.

You can get one that will accommodate a pico-psu power supply. This is a laptop-style power supply, with a barrel connector to connect to the computer.

This connection needs to be figured out before ordering parts. The right pico-psu will connect right into the ATX power supply plug, just like the plug coming out of a regular ATX power supply. But the barrel connection needs to be supported by the case.
 

http://www.techspot.com/community/topics/mini-itx-case-suggestions.206075/
Relevancy 24.08%

Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp

A:New Build no power-up: case's power supply or MB?

Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.

So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.

So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.

now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
 

http://www.techspot.com/community/topics/new-build-no-power-up-cases-power-supply-or-mb.206259/
Relevancy 12.9%

Hi,

I'm using a Huawei Mobile Broadband E303 and I've been having this problem for 6-7 days now Ples halp
It was working perfectly fine before but now the speed wont go past 60-70kbps.
My current operating system is windows 7 ( V 6.1.7601 )

I've tried using it on other laptops with windows 7/xp/vista as their operating systems still the same problem except for my brothers laptop which runs on windows 8. and dont tell me that this Thing wont work because its not compatible with my operating system, because I've been using it for over a year without an issue.

My ipconfig shows:
Mobile Broadband adapter Mobile Broadband Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::7450:69bc:7a3e:fee8%57
IPv4 Address. . . . . . . . . . . : 172.22.155.137
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 172.22.155.138
And when I try to do nslookup:
C:\Windows\system32>nslookup
Default Server: google-public-dns-a.google.com
Address: 8.8.8.8

The default server shouldn't be that thing. please help. Nor the address

Edit: I've tried Uninstalling the Program which came with the USB.
I've tried calling my ISP, with no problems on their end.
 

http://www.techspot.com/community/topics/your-computer-seems-to-be-correctly-configured-but-the-device-or-resource-dns-server-not-respondin.206332/
Relevancy 13.33%

Randomly, about 2-3 weeks ago my computer began to run slowly. If I'm just browsing the internet or using word documents and things like that it is fine and I cannot tell. The problem lies in things like playing games or running programs like itunes. I checked for all virus/malware, and there was nothing that I could see. I did a defrag and cleaned/cleared the registry and temp folder. Does this sound like it could be a hardware or driver problem? If its not a virus, could you give me a few other reason a computer would start doing this randomly.
 

A:Computer runs slow

Overheating? What are the computers specs?
 

http://www.techspot.com/community/topics/computer-runs-slow.179236/
Relevancy 13.33%

These are the specs I have so far,

MSI X99S Gaming 7 Motherboard
i7 5820K
Corsair Vengeance LPX 16GB (4x4)
2x MSI GeForce GTX 970 Gaming 4GB SLI
Cosair Hydro Series H80i
Cosair HX1000i 80plus Platinum 1000W (For future maybe a third gtx970)
Coolermaster Cosmos 2 Ultra
Samsung EVO 250GB (OS)
2x Samsung EVO 1TB (Main Games)
2x Western Digital Black 3TB (Other older games and programs)
Windows 7 Pro 64x

Other various fans (going with a black and blue theme outside and red and white inside)

Plenty for max setting at that resolution?
 

http://www.techspot.com/community/topics/parts-for-3440x1440-computer.205962/
Relevancy 13.33%

A few months ago my computer started crashing when playing games. The screen would turn either black, white, (or once pink), the fan/fans would max out, and the audio would just change to a loud buzzing sound. This would continue until the laptop was turned off.
Around that time, one of my hard drives was failing. We thought, seeing as it fitted so well, that it was the problem. I've just had the hard drives replaced, and while it was running perfectly for a few days, it has now started to crash again, and far more frequently. Most of the time just after the desktop loads.

I'm currently running in safe mode, and that's perfectly fine. No crashing.
I've tried disabling my audio drivers, and rolling back my video card driver, but with no success. I'm assuming that as safe mode has no problems that it must relate to a driver, or, some software, but I have no real clue what I'm talking about.

My video card is the NVIDIA GeForce GTX 580M, if that's important. No idea what other information to include. Thanks for any help anyone can give me.
 

A:Computer crashes increasingly often

Go to C:\windows\minidump. Minidump files have a .dmp extension. If there are any .dmp files, select them all and right-click, sending the files to a compressed(zipped)folder. Upload this folder as file here
 

http://www.techspot.com/community/topics/computer-crashes-increasingly-often.205623/
Relevancy 13.33%

Hello guys..I have a same a problem..I cant play any of my mouse in my laptop..can u help me to fix it..thank you so much.

Moderator note: Moved from this thread: http://www.techspot.com/community/t...t-computer-is-not-frozen.183253/#post-1430301
 

A:Can't move my mouse, but computer is not frozen

You can't use any USB mice in your laptop? How many have you tried?
 

http://www.techspot.com/community/topics/cant-move-my-mouse-but-computer-is-not-frozen.205615/
Relevancy 13.33%

Hello all,

I'm reading this (http://wps.pearsoned.com/ecs_kurose_compnetw_6/) networking book.
The exercise no 13 of chapter one says:

P13. (a) Suppose N packets arrive simultaneously to a link at which no packets are currently being transmitted or queued. Each packet is of length L and the link has transmission rate R. What is the average queuing delay for the N packets?

(b) Now suppose that N such packets arrive to the link every LN/R seconds. What is the average queuing delay of a packet?

I've obtained these for (a) and (b):

(a): (N-1)/2 L/R sec.
(b): For nth LN/R: [n(N-1)-2(n-1)]/2 L/R sec.

1- Are these answers correct?
2- Is here a correct place for posting such problems?
 

A:Computer networking exercises

My my; Network theory. Not to dampen your efforts, but unless there's a switch, knob, or parameter that can alter the outcome, there's little practical use of this kind of information IMO.

As an example of a practical issue, the SACKOPTS paramater greatly improves TCP performance.
 

http://www.techspot.com/community/topics/computer-networking-exercises.205528/
Relevancy 12.9%

Hello,

I'm really new to the tech/ computer world, and know next to nothing about graphics cards. I was wondering if someone could help me figure out what graphics card I can upgrade my computer to (if I can upgrade at all) I was wanting to buy the new Sims 4 game, but after having played a very slow and choppy Sims 3 for years on this computer, I'm ready to actually play a game smoothly without it freezing all the time.

Here's what computer I have:
Compaq Presario PC SR5601P
Processor: AMD Athlon X2 4400
Dual-Core Processor
Memory: 1 GB
Hard drive: 250 GB
Graphics: NVIDIA GeForce 6150 SE Graphics
Windows Vista SP 1

Thanks!
 

A:Unsure of what graphics card my computer can upgrade to

Sims 4 System Requirements & your PC system results

For Sims 4 according to the link above, your CPU GPU and memory is lacking for even the minimum system specs. We can recommend a GPU, but that's not all you need if you plan on playing Sims 4. And if you get a stronger GPU, chances are you will also need a stronger PSU. If 300W's is all you have for power, you are limited to sub $100 graphic cards. Which would be fine for Sims 4, but then you also have a CPU and memory that needs upgrading.
 

http://www.techspot.com/community/topics/unsure-of-what-graphics-card-my-computer-can-upgrade-to.205298/
Relevancy 26.66%

Which 1 is better -
1)Exynos 5260 ; Quad-core 1.3 GHz Cortex A7 & dual-core 1.7 GHz Cortex A15 with 2 GB RAM
OR
2)Qualcomm MSM8928 Snapdragon 400 ; Quad-core 1.6 GHz Cortex-A7 with 1.5GB RAM??
 

A:Smartphone processor comparison

Definitely the Exynos 5260, no question about it! It is really a 6 core CPU since it uses the 4 Cortex A7 CPUs to process regular loads and it taps into the 2 A15 CPUs when it needs extra power.
 

http://www.techspot.com/community/topics/smartphone-processor-comparison.205273/
Relevancy 13.33%

I have been upgrading an old Compaq Presario SR5130NX.
I'm new to the computer scene, and decided to switch the PSU to 230V, just to see what would happen. It exploded. That's what happened. I installed a new PSU, and now, whenever I turn on the PC, there is an error message saying "CPU fan has failed" and the PC shuts down automatically before I can access the set up, or bios. My case is currently open however, and I can see that the fan is working so I think the motherboard got messed up, and I'm afraid this could have also damaged my graphics card and memory.

My motherboard is a m2n68-la (ivy) and here are the product specifications: http://h10025.www1.hp.com/ewfrf/wc/...&product=3436820&tmp_track_link=ot_search#N96

Can anyone tell me what's going on? Can this be fixed, or should I just get a new motherboard and start from scratch?

If I'm posting this in the wrong section, please point me in the right direction.
 

A:Is my computer dead?

Unplug from wall socket.
reset bios by removing bios battery for few seconds. reinsert bios battery.
check if cpu fan is still attached to cpu fan header and is still intact.
check 20+4 main power connector
check 4-pin auxiliary power connector (can be 4+4, depending on motherboard)
(check the motherboard for any burnt marks, bloated capacitors.)
plug to wall socket and turn on.

if unable to power up computer, then maybe the motherboard is dead.
if the motherboard has any burnt marks or bloated capacitors, don't use it as it maybe dead.

if you are going to build a new budget build:
processor: intel Pentium g3258
cpu cooler: coolermaster hyper 212 evo (or 212x)
motherboard: h81, b85, h97, or z97
memory: 4gb ddr3-1600 single memory module (or 2x4gb)
gpu: NVidia gtx 750, amd r9 260
storage: 1tb hdd
psu: seasonic 500w+
OS: windows 8.1 64-bit or ubuntu
case

alternate build:
processor: i5-4690k
cpu cooler: coolermaster hyper212 evo (or 212x)
motherboard: asus/asrock z97
memory: 2x4gb ddr3-1600 (or 2x8gb)
gpu: NVidia gtx 760 or amd r9 270x (or higher)
storage: 256gb Samsung 840 evo ssd + 3tb Seagate hdd or 2tb wd black hdd
psu: seasonic 600W+ for single gpu usage
OS: windows 8.1 64-bit or ubuntu
case
 

http://www.techspot.com/community/topics/is-my-computer-dead.204809/
Relevancy 12.9%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 13.33%

I've recently built a new computer for myself and has been running perfect for a few months. A couple days ago whilst gaming/browsing my monitor went into power safe mode and shortly after my computer shut off, I tried to start up again only to have the same problem occur , the only old parts were a graphics card and psu, I just got in a new gpu and installed it successfully. Same problem occurs. All fans are running properly including the heatsink , processor core temps are around 39 , everything seems to be running ok? Thoughts?
 

A:Very strange custom computer issue

Check event viewer to see why it shut down.
 

http://www.techspot.com/community/topics/very-strange-custom-computer-issue.204679/
Relevancy 13.76%

I recently got a broken computer as payment for a data recovery project however as it turns out the computer Which computer to use? isn t entirely broken it actually works fine all I had to do was reset the bios and remove the GPU There s only one part that was broken and that was the GPU reason for that was overheating since the Clud D sticker on top of the GPU wasn t in place to it has been blocking the fan from spinning as it should Anyhow now I have ended up with a dilemma what computer should I use The Which computer to use? specs below is what I can put together with parts that I got and with the parts that I currently use and note that the only quot real quot difference is the CPU CPU Intel Core i - MOBO Asus P T SE HDD Gb Kingston SSD Gb Tb GPU XFX HD PSU W ChieftecClick to expand CPU AMD FX- OC - GHz depending on the temp inside MOBO Asus M A LE R HDD Gb Kingston SSD Gb Tb GPU XFX HD Which computer to use? PSU W ChieftecClick to expand Additional Question - Is it possible to use both Corsair tri-channle TR XG C RAM at the same time as my current Kingston RAM which isn t Which computer to use? tri-channel - How much can the i be overcloed nbsp

A:Which computer to use?

Having to choose between the two you have, I would stick with the Intel i7. Follow the guide provided in link and you could reach 4 GHz overclock, depending on if your motherboard can handle the overclocking.
http://www.overclock.net/t/538439/guide-to-overclocking-the-core-i7-920-or-930-to-4-0ghz
I would not suggest overclocking too much if you are running stock cooling fan. It will create too much heat for the i7 to handle.
 

http://www.techspot.com/community/topics/which-computer-to-use.204502/
Relevancy 27.09%

Hello guys,

I am new here in techspot. I hove you can help me guys. When I open my laptop and run dxdiag processor appears but when I start to use my laptop become very slow. sample screenshot. thnaks.
 

A:Processor goes to n/a

1. Does your laptop feel hot when it starts to become very slow?
2. Did you update your AV, Malwarebytes then do a full scan?
3. if you have done all that and nothing is found next is update all your drivers & windows

If after all those 3 it still becomes slow just post back with results
 

http://www.techspot.com/community/topics/processor-goes-to-n-a.204376/
Relevancy 13.33%

Hi all,

I have heard of somethings like computer manufacturer and motherborad manufacurer. For example some time ago, when I had problem with my desktop PC, some asked me what's your computer manufacturer and motherborad manufacurer?
what's the difference between these two please?
 

A:Computer/motherboard manufacturer

Computer manufacturer Is most of the time is Dell, Hp,Compaq, Ausu are a few.
Motherboard manufacturer . Asus, Gigbyte, Asrock. Msi, Are a few. This is what they are referring to. When they ask you those Questions .
 

http://www.techspot.com/community/topics/computer-motherboard-manufacturer.204218/
Relevancy 12.9%

I have joined a computer (PC1) to a domain control server (2008), and user able to login using their domain user account - although recently I have found out that even though the computer (PC1) do not connect to a server, user still able to access using their domain account.
Is there a way for me to restrict domain account user from accessing the computer (PC1) if they are disconnected from server?
Hope my explanation make sense to you guyz.

Thank in advance
 

A:Prevening domain user from accessing Computer

Lots to be considered. Joining a domain is intended to give the company admin configuration control of all the company users.
This is normal, expected and even proper for the company to do this.




restrict domain account userClick to expand...

hmm; only the company admin should be able to do this and almost always it is done using some scripts, NOT by loggin into your PC. So - - who is accessing your PC remotely, the admin - - how do you know this occurs?

PCs joined to a domain usually get a replacement for PC Login - - the network form and that creates a link to the domain controller.
 

http://www.techspot.com/community/topics/prevening-domain-user-from-accessing-computer.204127/
Relevancy 13.33%

Hi everyone

Could someone look over what I have and see if there is anything wrong with the list. oo and I have a SSD hard drive already and can someone recommend a CD drive and ram?
thanks in advance

Qty.Product DescriptionSavingsTotal Price
1
ASUS GeForce GTX 770 GTX770-DC2OC-2GD5 Video Card
Item #:N82E16814121770
Return Policy: VGA Replacement Only Return Policy
$399.99
$374.99
1
NVIDIA Gift - Watch Dogs
Item #:N82E16800995199
Return Policy: Standard Return Policy
$69.99
1
Intel Core i7-4770 3.4GHz LGA 1150 Desktop Processor
Item #:N82E16819116900
Return Policy: CPU Replacement Only Return Policy
$338.99
$326.99
1
CORSAIR CSM Series CS750M 750W Power Supply
Item #:N82E16817139061
Return Policy: Standard Return Policy
$129.99
1
ASUS SABERTOOTH Z97 MARK1 ATX Intel Motherboard
Item #:N82E16813132124
Return Policy: Limited Replacement Only Return Policy
$274.99
$254.99
1
NZXT Phantom 410 Series CA-PH410-B1 Black Computer Case With Side Panel Window
Item #:N82E16811146085
Return Policy: Standard Return Policy
$124.99
$104.99
Grand Total:$1,191.95
 

A:First computer build

Holy smokes.

Possibly, no one has commented because 1. people want to hear what you are aiming for - a gaming PC? CAD/CAM? Web-surfing? etc., and 2. you sure piled on a list of pricey items without any argument for why you need such pricey items when you can do nearly as well by sliding down the price range a lot, and 3. you have not said what size the SSD is - it might not be large enough to comfortably support operating system plus a few multi-player games.

A first-time build does not have to be the ultimate Win experience. Largely, builders work for a trade-off between cost and function. For your first build, you may want to build something that is straightforward, not too expensive, and can be upgraded in the future.

If money is no object, just get the most expensive of everything and enjoy. Just make sure everything is compatible.

I am not trying to be rude. Just kinda surprised by the price tags, and the lack of responses thus far.
 

http://www.techspot.com/community/topics/first-computer-build.204008/
Relevancy 25.8%

HI Will this processor fit a
Biostar TA970 Socket AM3+ 8 Channel Audio ATX Motherboard.Have now find out it dosent so disregard.
 

A:AMD phenom 9650 quad core processor 2.30ghz

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=623#cpu

You mean the Phenom 965BE 3.4ghz quad core? If so that's an AM3 cpu and it shows support for it.
 

http://www.techspot.com/community/topics/amd-phenom-9650-quad-core-processor-2-30ghz.203920/
Relevancy 48.59%

Hi, so today I unplugged my computer while it was still running by accident. Now it wont start at all, no lights, no fans, nothing. I am concerned that it may be a problem with my power supply (maybe fried it or something). And no its not a problem with the cord (I tried a different one), its not a problem with the power switch (the one that you switch to either circle or line) because I tried it both ways. However recently my computers power button stopped working so my brother hooked up an old keyboard to my computer so to start it I will press a key on that keyboard and it will start up my computer, so I have to keyboards one to start the computer up and one to type. So in summary im not really sure what the problem is but im 90% sure it has something to do with either my "power keyboard" of my Power Supply so yeah. Any help will be apreciated
 

A:Accidentaly unplugged computer without shutting down. Computer will not start.

Try and get a psu off a friend who might have a extra one. Go from there. This way you might be able to narrow it down. It really hard to say what happen .
 

http://www.techspot.com/community/topics/accidentaly-unplugged-computer-without-shutting-down-computer-will-not-start.203970/
Relevancy 12.9%

Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.
 

A:Don't see my external hard drive in disk management or on computer

Check this thread out: http://goo.gl/rxkBN
 

http://www.techspot.com/community/topics/dont-see-my-external-hard-drive-in-disk-management-or-on-computer.203836/
Relevancy 12.9%

The Seagate Momentus 5400.6 hard drive I'm using is from my old laptop it has 4 disks.
After I put it in the (IT-CEO IT-700) enclosure, and connect it to my new laptop it does not show up in 'My Cumputer' and 'Disk Management', but displays in the 'device and printer' section of control pannel.
I also can't eject the hard drive, even when I'm not doing anything to it, the (IT-CEO IT-700) enclusre's blue signal light just keeps flashing for a while then goes off for a sec, then resume flashing again.
My laptop also keeps trying to install the hard drive.

I tried reinstall the hard drive's driver, but that did not solve the problem.

Please Help.
 

A:External Hard drive not showing up in 'My Computer', and 'Disk Management'

Have you tried using different drive enclosure other than the IT-CEO IT-700?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-in-my-computer-and-disk-management.201875/
Relevancy 13.33%

Sorry for that long title. Anyway, I was watching some YouTube videos when my wi-fi suddenly stopped worked. With this, I don't mean that I'm not catching signal from my router. I mean that my computer isn't receiving signal from any network. I don't know anyway to fix this, it never happened. I also won't buy a new computer. I got this on Christmas and I think that 7 months isn't that old. Also, the only tutorial I found doesn't applies to my computer (It was for a mac ). I have no idea of how to fix this and if you know, PLEASE HELP ME!!!!!! (If you are curious of how I am posting this, it works with Ethernet connection)
It's an ASUS computer with Windows 8.
 

A:My Computer Isn't getting signal from any Wi-Fi Network

Give the following a try and see if it helps:
Go to network sharing center - change adapter setting - click on wifi and then Diagnose this connection.

If this does not help, please let us know and we can suggest something else to try.
 

http://www.techspot.com/community/topics/my-computer-isnt-getting-signal-from-any-wi-fi-network.203822/
Relevancy 13.76%

Hello,
I bought a new mobile computer a few weeks ago,
the model is: HP 250 Business i3-3110M.
Then at home, I charged the battery and checked that everything is working properly.
In practice I'm going to use it only in a few months from now.
What is the best way to keep it until then?
Should I empty the battery, disconnect it? and etc.
thanks
 

A:New computer- not in use

I'd suggest making sure the battery is fully charged & then just unplug the AC & let it sit till you're ready to use it.
Although you didn't say what OS it is, I'd suggest you have somebody here help you remove the crapware that it don't need & install security programs
http://www.techspot.com/downloads/2695-superantispyware.html
http://www.techspot.com/downloads/223-avast-home-edition.html
http://www.techspot.com/downloads/4716-malwarebytes-anti-malware.html
http://www.techspot.com/downloads/568-spywareblaster.html
Good luck
 

http://www.techspot.com/community/topics/new-computer-not-in-use.203605/
Relevancy 13.33%

Hello,
I gotta Seagate USB 2.0 500 GB Expansion drive. Its been working just fine on my computer up until a couple days ago. For some reason the latest windows 7 update must have messed up the formatting of it, now its not being recognized on my laptop at all. Shows up as a local disk...very frustrating. I've tried almost everything I could think of. I've tried assigning a partition letter in disk management, uninstalling the software, trying it on different computers, system restore...nothing. I don't wanna result in having to reformat it and lose what I got. Could somebody please help me???
 

A:Seagate HDD not being recognized by my computer

You may try to scan and check your hard drive for possible errors using Seagate's Seatools for Windows.
 

http://www.techspot.com/community/topics/seagate-hdd-not-being-recognized-by-my-computer.203258/
Relevancy 13.33%

After updating the Windows XP to Windows 7, my computer becomes really slow and recently often receives a low disk space message. And there is only 3GB of free space left on my system partition. So, I think it is the time to extend my system partition space. But, I am not so familiar about the partition expanding things and don?t know what to do. Do you have any idea for me? Please, give me some suggestions! Thanks!
 

A:Computer partition space problem

Can you post a screenshot of Disk Management, so we can better understand what you are dealing with?
 

http://www.techspot.com/community/topics/computer-partition-space-problem.203271/
Relevancy 13.33%

Are these good statistics for gaming
Processor Speed:
3.40 GHzOperating System:
Windows 7
Memory:
12 GBScreen Size:
None
Hard Drive Capacity:
1 TBProcessor Type:
Intel Core i7 4th Gen.
Operating System Edition:
Home Premium
Brand Alienware
This is an alienware x51 R2 with the below specs

i7-4770 processor @ 3.40GHz

Kingston HyperX Blu 8GB (1x8 GB Module) 1600MHz 240-pin DDR3 Non-ECC CL10 Desktop Memory KHX1600C10D3B1/8G

Kingston Hyper X Blu 4 GB 1600MHz DDR3 Non-ECC CL9 Desktop Memory (KHX1600C9D3B1/4G)

1TB HDD

GTX 660 Alienware OEM Version

Blu-ray slot load player

Windows 7 home premium disk

Cyberlink PowerDVD 9.6 disk

330W power brick

Alienware mouse and keyboard
Intel Network 7260.HMWG WiFi Wireless-AC 7260 H/T Dual Band 2x2 AC+Bluetooth HMC is this good for $200

It is used

Also as you can see from specs I upgraded the RAM and the wireless card.
This auction will not include the old RAM.

12GB RAM
 

A:Is This computer good for gaming?

Price? It's probably overpriced Alienware junk, even if 2nd hand. GTX 660 isn't gonna let you max out games at 1920x1080, and it can't be upgraded.
 

http://www.techspot.com/community/topics/is-this-computer-good-for-gaming.203214/
Relevancy 13.33%

So, I recently fired up my old PC and it worked for a while just fine but now all of a sudden it speeds up like crazy. The analog gadget clock spins like a fan and every keystroke gets "pushed" at least 20 times if I just tap it once.
The question is, is there a way to "vsync" or slow down the computer to a normal rate?
 

A:The wierdest computer problem ever

How old? Sounds almost like a dying CMOS battery (the little button battery on your mobo).

I'd turn PC off, unplug from power, take out this battery, press power buttons, then assemble it 10 mins later and turn it on and see.
 

http://www.techspot.com/community/topics/the-wierdest-computer-problem-ever.202955/
Relevancy 12.9%

I built a gaming PC and it wont connect to the monitor. Also the keyboard and mouse won't turn on.
My graphics card is a NVIDIA Geforce GTX 700
 

A:Built own computer, but it wont connect to monitor

Could you please provide the specs for your build? Need to list the exact parts you used, including make and model. It makes things easier to help with diagnosing your issue or issues.
 

http://www.techspot.com/community/topics/built-own-computer-but-it-wont-connect-to-monitor.203102/
Relevancy 13.33%

Hello,
I have a HP Probook 4540s laptop running Windows 7 64-bit. Just recently I noticed that at nigh my laptop will for some reason turn itself on and then off with a blank screen, I saw that happen a couple of times when I had a bad sleep during night. Just wondering if there is a way to fix that and if that is something to worry about?

P.S. The laptop is not really off. It's either in sleep or in hibernate mode.

Thank you.
 

A:Computer turns itself on and then off at night

Your settings for sleep may very well be on. If its working fine after you start using it . This may very well be what its doing.
 

http://www.techspot.com/community/topics/computer-turns-itself-on-and-then-off-at-night.203024/
Relevancy 26.23%

This is my Entire system spec Im looking to upgrade my processor but I need help Operating System System Model Windows Home Premium x Service Pack build Install Language English United States System Locale English United States Installed AM Boot Mode BIOS Secure Boot not supported eMachines ET G System Serial Number PTNBA Enclosure Type Desktop Processor a Main Circuit Board b gigahertz AMD Athlon II X u kilobyte primary memory cache kilobyte secondary memory cache -bit ready Multi-core total Not hyper-threaded Board eMachines MCP PM-GM Bus Clock megahertz BIOS AMI P -A Drives Memory Modules c d Gigabytes Usable Hard Drive Capacity Gigabytes Hard Drive Free Space HL-DT-ST DVDRAM GH N SCSI im with AMD is board? to my What Processor mother compatible this And new CdRom Device Optical drive WD Virtual CD USB Device Optical drive Generic- Compact Flash USB Device Hard drive -- drive Generic- MS MS-Pro HG USB Device Hard drive -- drive What AMD Processor is compatible with my mother board? And im new to this Generic- SD MMC USB Device Hard drive -- drive Generic- SD MMC MS What AMD Processor is compatible with my mother board? And im new to this MSPRO USB Device Hard drive -- drive Generic- SM xD-Picture USB Device Hard drive -- drive WD My Book USB Device Hard drive GB -- drive s n WMAVY WDC WD AAKX- CA SCSI Disk Device GB -- drive s n WD-WMAYUL SMART Status Healthy Megabytes Usable Installed Memory Slot DIMM has MB serial number DE B Slot DIMM has MB serial number D B Slot DIMM is Empty Slot DIMM is Empty Local Drive Volumes c NTFS on drive GB GB free k FAT on drive GB GB free Operating System is installed on c Network Drives None discovered Users mouse over user name for details Printers local user accountslast logon Quentin PM admin UpdatusUser AM local system accounts Administrator AM admin Guest PM HomeGroupUser never Marks a disabled account Marks a locked account HP LaserJet Professional P w on IP Microsoft Shared Fax Driver on SHRFAX Microsoft XPS Document Writer on XPSPort Controllers Display ATA Channel Controller ATA Channel Controller NVIDIA nForce Serial ATA Controller x Standard Dual Channel PCI IDE Controller What AMD Processor is compatible with my mother board? And im new to this NVIDIA GeForce GTS Display adapter DELL WFP Monitor quot vis s n XX- JU -XXXXX- - S June Bus Adapters Multimedia Standard Enhanced PCI to USB Host Controller Standard OpenHCD USB Host Controller HP Webcam HD- Mobiola Wave Audio Device WDM Mobiola Web Camera Video Source NVIDIA Virtual Audio Device Wave Extensible WDM Realtek High Definition Audio Senstic PocketAudio Senstic PocketCam USB Audio Device Virus Protection Back to Top Group Policies No details available None discovered Communications Other Devices Hamachi Network Interface primary Auto IP Address Gateway Dhcp Server Physical Address A D Connection Speed Mbps Microsoft to Adapter Microsoft ISATAP Adapter NVIDIA nForce Mbps Ethernet Auto IP Address Gateway Dhcp Server Physical Address FC C AA Connection Speed Mbps Teredo Tunneling Pseudo-Interface Networking Dns Servers HID-compliant consumer control device x HID-compliant device x USB Input Device x HP Webcam HD- HID Keyboard Device x HID-compliant mouse Microsoft PS Mouse USB Composite Device x USB Mass Storage Device x USB Root Hub x Generic volume shadow copy WD SES Device E F G H I nbsp

A:What AMD Processor is compatible with my mother board? And im new to this

That is an AM3 socket CPU which means it should be compatible with the Phenom II series CPU's. I looked up the board and it should still support up to a 95 watt CPU so any Phenom II X4 CPU with a 95 watt TDP would work on it.

Like This
http://www.amazon.com/AMD-Phenom-Socket-Quad-Core-Processor/dp/B002XNBQJQ
 

http://www.techspot.com/community/topics/what-amd-processor-is-compatible-with-my-mother-board-and-im-new-to-this.202437/
Relevancy 12.9%

when i start my computer, it goes to the gateway start page, and after a while (it's quite slow) it goes to the black page, and this is what it says:

Intel Boot Agent FE v4.1.10
Copyright (C) 1997-2003 Intel Corporation

Intel Boot AGent PXE Base Code (BA 1210BC-GW1)
Copyright (C) 1997-2003 Intel Corporation

PXE-E61 media test failure check cable
PXE-M0F exiting Intel Boot Agent

Reboot and select proper boot device or insert boot media
in selected boot device.

it just stays on that screen until i do a CTRL ALT DEL, then it goes back to the Gareway screen and after about 30 seconds finally boots up and i get the Windows XP start up page, and it opens up my desktop and i can continue .

Can anyone tell me why this started happening and how to correct it?
 

A:Computer start up is bringing up boot agent message

How old is the computer, or the hard drive. It appears you have a failed or failing hard drive.
 

http://www.techspot.com/community/topics/computer-start-up-is-bringing-up-boot-agent-message.150663/
Relevancy 13.33%

My computer was cleaning out some files it found to be of no use. While it was uninstalling them I lost internet connection and it said I needed ethernet. My ipod connects as well as every other device in my house. I uninstalled with a program that came with my computer and need help.
 

A:My computer only connects with ethernet

Check the Device Manager and tell us if you see any yellow (!)
 

http://www.techspot.com/community/topics/my-computer-only-connects-with-ethernet.202881/
Relevancy 13.33%

computer one specs:CPU: Amd Phenom II x4 830 3.2ghz GPU. Nivida gtx 650
Ram: 8gb ddr3 1333
Hard Dive: 500 GB
PSU: 550 Watt
VS
computer two specs
4gb memory 500 gb hadrive
Nvidia GTX550T1
1GB GDDR5
2.13 ghtz processor

 

A:What computer is better for gaming

There is only enough detail to compare graphics, HDD, and memory. The graphics/HDD are comparable, and clearly the memory in machine one is twice as much. For a gaming machine, you will want at least 8GB memory.

Machine two doesn't list which CPU or PSU. The CPU frequency is all that is listed.
 

http://www.techspot.com/community/topics/what-computer-is-better-for-gaming.202683/
Relevancy 13.33%

Hey, I am wanting to make my first gaming computer and despite all my research and back checking, I still feel like something may be wrong, not to mention if possible I would like to save a bit more money since I am just above my budget of about $500. Below is a link to my build.

http://pcpartpicker.com/user/prince/saved/4Fbc

I am hoping to play mainly games like WoW, Arche Age, and mmos like that. Also I may occasionally play something more demanding like Skyrim or something. Any tips, and if possible money saves, let me know.
Thank You!!
 

A:Gaming Computer Build Check

Probably better to get rid of the GPU and just go with an AMD APU. Like A10-5800K
 

http://www.techspot.com/community/topics/gaming-computer-build-check.202373/
Relevancy 13.33%

I have an eMachines ET1331-02 desktop. (Yes, VERY outdated, but can't get a new one, don't ask why.)

I do quite a bit of gaming and need to be able to run many applications at the same time. Can I get recommendations of upgrade paths?
 

A:Need MAJOR upgrades for my 3+ year old computer

The machine is quite weak since it only has a dual core CPU. This will limit you when it comes to gaming and running many applications. What you can do though if you dont want to get a new machine is upgrade the graphics driver to the latest one supporting your old Geforce 6150SE chipset >>here<<. You can also upgrade your ram to the max it can take. You can use this tool to help determine how much and what RAM to purchase. I also recommend possibly clean installing Windows (wiping it completely and starting from scratch) since that usually gives a nice performance boost. You can check out how to do a clean install here. Keep in mind, if you upgrade from 4GB to something more, you will need a 64bit OS, or else the OS cannot take advantage of the extra RAM. You can download a legitimate copy from here. You can use the Windows 7 key pasted on your machine.
 

http://www.techspot.com/community/topics/need-major-upgrades-for-my-3-year-old-computer.202555/
Relevancy 13.33%

I think I've checked correctly if the power will be enough and I have plenty of space to fit everything.

http://www.pccasegear.com/index.php?main_page=wish_lists&wlcId=303296&action=wish_lists
 

A:Computer Build Check

Were you wanting all those items? Seemed to be some redundancies and over-kill. Regardless though, 10K has me drooling.
 

http://www.techspot.com/community/topics/computer-build-check.202477/
Relevancy 13.33%
A:2 PSUs powering 1 computer

marinkvasina said:





We have used a cable like this http://www.amazon.com/Vantacor-Dual-Adapter-Cable-2-way/dp/B00DL3L2J6
to provide common ground for both PSUs.Click to expand...

Common ground it not the purpose of that splitter. The splitter provide a "power good signal" from the motherboard to both PSU's, a green light so to speak. Without this power good signal, the PSU's would shut down almost immediately after supplying power to the motherboard. The power good signal is what keeps the power supplies functioning. If the motherboard senses a problem, it will not provide a power good signal.

The power supply may not function, if there is a problem internally with the power good sensor circuit. I had a power supply go out on me and without knowing for sure, I suspect this circuit.




marinkvasina said:





My question is, how safe is this?Click to expand...

I would say it is very safe seeing as there are cases designed to support two PSU's.
 

http://www.techspot.com/community/topics/2-psus-powering-1-computer.199807/
Relevancy 13.33%

Hi guys, I live in Croatia and I am looking to buy myself a new gaming mouse.
I was looking at some web sites like Amazon and Ebay but prices there for a mouse I want(Razer Deathadder) are simply stupid so my question is where can I buy PC peripherals for a low price and they can be shipped to Croatia?
Thanks in advance.

 

A:Where to buy computer peripherals?

I think Amazon is the best bet. I am not sure how the policies change for you since you are in Croatia (return policies for example). But overall, I think they are the best option.
 

http://www.techspot.com/community/topics/where-to-buy-computer-peripherals.202172/
Relevancy 11.61%

Hi I have a budget of $2000 I need a computer for rendering. Does the video card matter for the rendering process or only for the modeling and custizing?
 

A:I need a computer for rendering in Artlantis and Maxwell (Not modeling only rendering)

I would look at this build. You can take out the sound card and peripherals and use the saved money to buy an i7 4770K rather than the i5. I would also upgrade the GPU to a GTX 780. The CPU and GPU are vital hardware when it comes to rendering and modelling. That rig I mentioned above should do fine.
 

http://www.techspot.com/community/topics/i-need-a-computer-for-rendering-in-artlantis-and-maxwell-not-modeling-only-rendering.201566/
Relevancy 28.81%

Ok,guys.I need a suggestion about what case to get,my budget is up to 60$.
Looks are not important, the most important things are to have 1 fan or more,good cable managment and good build quality.
Thanks.
 

A:Budget PC case?

The Corsair 200R meets all your needs, but unfortunately, after Corsair released their new Spec budget cases, they raised the price of the 200R from $50 to $70.

So if you want a nice case for <$70, Corsair has some nice options you can check out >>here<<. I would watch unboxing videos on the Spec cases before purchasing since I am unsure if they would suit your needs (I am not too familiar with them since they are new). If you decide on a case, I recommend buying them from either >>Newegg<< or >>Amazon<<.

If you are interested in an unboxing of the 200R, check it out >>here<<.
 

http://www.techspot.com/community/topics/budget-pc-case.201421/
Relevancy 12.9%

Hello,

I'm new to gaming and just starting to learn, but I could really use some help.

I have a Dell Studio 1558 with an Intel Core i3 CPU and a 64-bit operating system, and I'm wondering if it will support an nvidia gtx 770 graphics card.

I'm not really sure how to tell and most of the explanations I've found have been too technical for me at this point, so I would really appreciate help.
 

A:Will computer support an Nvidia GTX 770 graphics card?

Can you tell us your complete specs and what wattage your PSU is?

Thanks.

-JC
 

http://www.techspot.com/community/topics/will-computer-support-an-nvidia-gtx-770-graphics-card.201351/
Relevancy 11.61%

Yesterday, I started a download and kept the pc on with my Seagate FreeAgent GoFlex External HDD 1TB plugged in. After I woke up I realized that there was a power cut and the computer went off unexpectadly (I had no UPS or any backup system).And, I found that my Ext HDD was not seen in my computer anymore (It was working perfectly until before I went to bed).
In device manager, under 'Disks' it shows 'GoFlex Hard Disk', but in BIOS or Disk Manager there is no sign of this HDD.

I really need the data in the HDD badly. Please help me recover it.
P.S. I read somewhere that keeping the HDD in freezer might help and give a little more time. Is that true? Worth the risk?
 

A:External HDD gets detected in Device Manager but not Disk Manager or seen in 'My Computer'

Power outage probably killed something in the enclosure or its PSU. The drive in the enclosure is probably fine. I would remove the drive from the enclosure and put it in a dock or install it in a desktop computer before considering freezing it. Freezing is usually reserved for click of death drives, and a last ditch effort.
 

http://www.techspot.com/community/topics/external-hdd-gets-detected-in-device-manager-but-not-disk-manager-or-seen-in-my-computer.201343/
Relevancy 12.9%

I have two WD 3tb external drives. They both work but only one at a time. I am running Windows 7. I have renamed both drives but still no go. I have previously have had a 2tb and one the 3tb drives running at the same time with no problem. I had to upgrade to the 3tb from the 2tb because of the size of my projects I am working on. Does anyone have a solution?
 

http://www.techspot.com/community/topics/computer-not-recognizing-2nd-of-the-same-wd-mass-storage-device.201294/
Relevancy 13.33%

My sister is still on XP I know updates are ending very soon and I am going to try to talk her into upgrading - she s just afraid she ll have problems with the software she uses settings for it etc Anyway she does have good third-party solutions installed for virus and malware protection So that s for another day Recently she started having trouble connecting to the Internet on the computer upstairs There were two separate modems that connected to the Computer on Wifi Old an internet independently in the household The one downstairs works fine her son s She even went and picked up a new modem because it seemed like that might have been the cause It worked for a short time seemed like a few hours from what I Wifi on an Old Computer could gather but then she started having the exact same problems in that it wouldn t connect which made me think the problem might be with her nic port She picked up an ac adapter - this one www dlink com us en home-solutions connect adapters dwa- -wireless-ac -dual-band-usb-adapter at a local store and the computer downstairs Wifi on an Old Computer has an ac router Asus RT-AC U She can t get it to see the network on the XP computer upstairs Usually I would connect by remote desktop and help her with PC issues but I can t do that with this of course and I am not getting anywhere trying Wifi on an Old Computer to get it working over the phone It will just never show the network in range to connect to BUT she borrowed a netbook from a friend plugged the exact same USB adapter into it and it connects to the network fine upstairs So it d definitely in range Any ideas why the XP system won t see the network downstairs I was sure to tell her to disable the other network connections Nothing seems to help so far Thank you much in advance nbsp

A:Wifi on an Old Computer

Get a command prompt and look at the top of this

Code:
C:\Users\Jeff>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : JeffPC7
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid <<< WHAT DO YOU SEE HERE?
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

 

http://www.techspot.com/community/topics/wifi-on-an-old-computer.201132/
Relevancy 13.33%

Hello all,

I have been troubleshooting an issue I have been having with my PC for awhile now. I will turn my computer on to play a game (FarCry3 or Diablo 3). When I am finished I will close the game and go to desktop. After several hours of not being used I will return to my computer and start up the game. This time however the game will be "glitchy", the sound will be crackling and suffers lag the entire time. The only way I have been able to resolve this is by restarting my computer.

I have tried clearing my RAM cache, I am up to date on all updates regarding windows and hardware. I also initially only had 4gb RAM I upped it to 8gb to see if that could potentially be an issue. I am lost here and was wondering if anyone out there had any tips or similar experiences.
 

A:Computer slows down drastically

I've had this happen to me too. It turned out it was the internet browser (IE I think, but it may have been chrome) taking up a ton of resources and using the CPU. I believe Facebook was the real problem and it only because a problem after having FB open for a long time.

If you can play in windowed mode perhaps you can open the task manager to see if your CPU is doing anything else at the same time. Sometimes malware can use your CPU and cause issues like this (not just when gaming).

You can also see if you can update drivers, but I would think that would affect the game all the time, not just sometimes.

Good luck,
 

http://www.techspot.com/community/topics/computer-slows-down-drastically.200139/
Relevancy 28.38%

Acomdata Model with WD AAJB drives installed System Dell Optiplex with Windows XP-Home Acomdata driver installed Two identical by computers different 4 recognized HD not case of IDE Acomdata 509 any New in cases and drives neither was recognized Objective to format these brand new IDE drives New IDE HD in Acomdata 509 case not recognized by any of 4 different computers Drive configured as Master Master with Slave New IDE HD in Acomdata 509 case not recognized by any of 4 different computers and Slave the only evidence of New IDE HD in Acomdata 509 case not recognized by any of 4 different computers movement of disk Pink light was when installed as slave As MASTER or Master w slave No pink LED at any time Reset as MASTER An identical second Acomdata box with a second new WD AAJB drive behaved exactly the same It was not recognized in the Dell Initially the Device Manager USB list showed a yellow warning for a USB Mass Storage Device Uninstall and reinstall hardware made no difference A subsequent repeat of uninstall reinstall caused the yellow warning to disappear When the drive was reinstalled a small screen popped up in the Notification area telling me that new hardware had been found My Computer Open - eventually showed H as well as W X Y Z the card readers At that time Device Mgr USB Mass Storage had no yellow warning any more Storage Disk Management did not show H at that point An internal inconsistency ----- When I tried to FORMAT from the OPEN drop down menu H was shown to be inaccessible Tried the Acomdata drive system on an iMac and two functioning Sony Vaio PCs running Windows None could see the external drive Microsoft and other sites had all the same ineffective directions for taking care of the Code Cannot start this device MS blamed it on a device in one place Nothing to do with a device No one mentioned anything about how the HD should be set up while Acomdata s instructions were to set it up as a Master which I did After spending several hours on this with these two new WD AAJB drives and two Acomdata cases no success --- Contacted WD support for help via E-mail They responded that they do not support the drives unless directly connected to the mother board I e they did not know or have any idea either Searching the Internet the problem shows up very frequently for many people regardless or PC make or Windows OS When I first acquired the Acomdata case it worked OK I actually installed Windows XP pro on it with some files That drive is not recognized either in that case any more Different PC nbsp

A:New IDE HD in Acomdata 509 case not recognized by any of 4 different computers

Addendum: One of the drives is in a 509 Combo case, so I tried the 1394/Firewire connection.
Result: with the 1394 connection, the PC hung up during booting at the Windows screen.
Checked the BIOS and it looked ok. Safe mode booted OK, but the drive was not visible in My Computer-->Open; Device Manger, or in My Computer--> Manage-->Disk Management.

There seems to be no way to recognize this case or its USB only 2nd unit.
I cannot believe that both Acomdata cases developed defects in storage.
 

http://www.techspot.com/community/topics/new-ide-hd-in-acomdata-509-case-not-recognized-by-any-of-4-different-computers.200984/
Relevancy 12.9%

I have a Dell Inspiron 2200 still running XP that has an administrator account, as well as a guest account (where the important docs I need are stored). It has a faulty DC jack, and I plan on having it recycled due to the fact the repair would cost more than the computer is worth. If I remove the hard drive and put it in a USB housing, would I be able to access the info stored under the guest account without any problems?