Windows Support Forum

BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Q: BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!

Relevancy 100%
Preferred Solution: BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
Relevancy 24.08%

I live in a condo complex where I m surrounded by wi-fi address MAC Need solving help mystery a connections I have a very rare neurological condition which causes me to have seizures if I am exposed to certain wireless devices It has nothing to do with the GHz so we think it s related to some other variable like modulation harmonics etc I don t have an expensive spectrum analyzer so I can t measure the variables but it has only happened when I was exposed to hotspots not Need help solving a MAC address mystery regular wi-fi modems A few weeks ago a neighbor s computer started showing a very strong signal related to an ad hoc network and I have had some pretty bad episodes it s kind of like epilepsy - some people have seizures from flashing lights I have them from certain radio transmission I mentioned the situation and he said he had no idea what I was talking about I gave him a printout showing how to turn off an ad hoc network and that night the signal disappeared and I finally got some sleep but then it showed back up the next day again I need to make my case so that he will make more of an effort to stop the auto setup that s apparently occurring and hoped some of you might be able to help I m attaching a screen shot taken with Acrylic WiFi The SSDI says SETUP and as you can see the signal is significantly stronger than anything else around me The MAC address Need help solving a MAC address mystery says unknown when I do vendor searches It s changed at least twice Those specs were typical of older MacBooks with b band Do any of you know of other devices that might have those same specs And is there anyway to permanently disable the setup so it doesn t automatically launch He claims he doesn t have an ad hoc network and apparently doesn t realize what s happening I had just renewed my lease so moving isn t an option And I can t tear up the carpet to put down shielding so that s not an option either I just need more information so that when I discuss this with him again I can have the details I need to convince him he can do something about it Thanks - nbsp

A:Need help solving a MAC address mystery

Oops...meant SSID is listed as SETUP.
Relevancy 24.08%

So this is my first time making a forum post since 169.xx ip address working, Ethernet not I am not desperate because nothing I ve tried has worked So two weeks ago I had an electrical surge in my house on my desktop the ethernet port on the motherboard died so I sent Ethernet not working, 169.xx ip address back my motherboard to have that fixed Now that I have it back I tried getting my ethernet to work though now the Ethernet not working, 169.xx ip address connection properly works as in Ethernet not working, 169.xx ip address the local area connection is now at least recognized I still have no internet access I just tried reinstalling Windows bit fresh install after I wiped everything My ethernet adapter is called Realtek PCIe GBI Family controller I have a E Linksys router and a Comcast modem I tried plugging the ethernet cable into each other but no luck Currently I m attempting to at least make the desktop use the modem internet directly I seem to be sending packets but not receiving them when I looked in the Status of the Local Area Connection in network connection details I have an autoconfiguration ipv of xxx xxx ipv subnet mask and nothing in the ipv default gateway dns server or wins server and no ipv default gateway I ve tried many things too many to name now but I am willing to try anything you guys mention and post the appropriate data or logs just tell me what it is you would like to see Any help would be highly appreciated nbsp

A:Ethernet not working, 169.xx ip address

Anytime you see 169.x.y.z, that's the clue that your DHCP request to the router did not get an answer.

DHCP should return an IP address directly related to your router's address and two DNS addresses.

search the form for DHCP - - I've posted a solution here on TS.
Relevancy 24.94%

I don't know if this is an issue or if it's normal. My brother and I play mmorgs together and share an internet connection. We recently upgraded to a faster modem with router built in and when we signed into the game, we got a messaged stating we were signing in from a different IP address. It showed the old address and the new address, but it wasn't our actual IP address, it was the DNS address of our Internet service provider. And the address was the same for both of our computers. Wouldn't this cause some problems if we're playing under the same address. I find I get d/c'd from the game if I just stand around and do nothing. I get a message "Global Allocation Error". I 've researched this and still can't find anything about it that makes any sense to me. Was wondering if it was because of the IP address being the ISP's DNS address?

A:IP address is DNS address

That's probably just your inside and outside IP address. Your home gets an 'outside' IP address which will be the same for every device connected. Inside your home, every device will get an 'inside' address like and

Go to here for info:
Relevancy 24.08%

Hi all

Not sure if I'm posting this in the correct place, so please move if need be.

I have a VPN for connecting to my work server, but we've recently changed our ISP and with it our static IP address. I need to connect to copy some files over today but don't know what the new IP address is. Is there any way I can find this out remotely, or would I have to be on that network to find it?

Thanks in advance

A:Static IP Address Changed

My guess is if you don't know the IP or Domain Name, you would need to be on that network. If you know either of the two, you could cross reference them.
Relevancy 24.08%

Im using a verizon wirleess USB modem (verizon wireless usb551l). It has been working fine for the last month, all of a sudden i start getting this

"windows has detected an ip address conflict"

Ive spoken to verizon, we were nice enough to allow me to get a new device after we spent an hour troubleshooting and still the same problem. Im connected for about 8 minutes then i disconnect and get the pop up with the error. I have been told that i have a windows 7 issue. Im not sure where to look or what do to? any help would be great, thanks in advance

ive tried resetting the IP address, reinstalled software. idk what else to do!

A:Windows has detected an IP address conflict

Where did you reset the IP address? I mean in which device did you reset the IP address?
Relevancy 24.94%

I have wireless connection on my laptop and also have a desktop computer in same internet connection. When I check my systems IP address from this site, it shows the same IP address for both laptop & desktop. why?

A:Same IP Address Why?

Because it is reporting the ip-address give your router by the ISP. The whole point for have a router is to create a LAN where each computer/device has a unique ip address that is then mapped on the public WAN address - - this is the NAT feature
Relevancy 24.08%

I have an ADSL Sagem ST2504 wireless router and it seems that my neighbour maybe using it.

I currently have it password protected with a TKIP password and i think someone has hacked it and is using it.

Can somebody please help me in how to tell if someone is using it and how i can stop them.


A:Can I find out whether or not some other IP address is using my wireless Internet?

You should be able to see which computers are connected to your network from your routers home page... usually
Relevancy 24.51%

Brighthouse "insists" there is no way to change IP address! lol
There must be!! I go to "start" , Run....."command"
Brighthouse tells me, you have to wait 24 hrs until "lease expires".
Anyone know of a way to change IP on the fly??

A:Changing IP address

turn the modem off and on?
Relevancy 23.65%

So we have a server at one of the places I work that is a domain controller and DNS server website domain server controller pointing DNS to of instead address as well as an smtp server The domain is named companyname com The website is you guessed it companyname com Now why they set this up like this I don t know but because they have every now DNS server pointing to domain controller instead of website address and then the DNS server decides to point companyname com to the domain controller and ignore the fact that I have a www Host A record pointing to the web server s external IP address and a record saying DNS server pointing to domain controller instead of website address that DNS server pointing to domain controller instead of website address companyname com should also point to the web server s address The problem seems to stem from that when the server reboots for updates it of course forces the DNS server records to update and it puts an entry in there that contradicts my static records with the domain controller s local address in for companyname com Can I force it NOT to put a certain entry in there or rather not update a certain entry that it has in there Or can I force it to treat my static records as primary I m fairly new to this as I ve not dealt with this issue before and I m out of ideas nbsp

A:DNS server pointing to domain controller instead of website address

Hmm; for the External DNS accessible to the web

create a CNAME for
create another for
each pointing to unique IP addresses
this dns ONLY supports publicly available services; NOTHING internal

the Domain Controller should have a SEPARATE DNS, internal to the LAN, not accessible to the Web.
Internal users configured to -> internal DNS which performs recursive lookup to your ISP's DNS.
Relevancy 24.08%

I have a Toshiba nb205 (3 Yrs) with Windows XP that I just restored. All working except wireless, I get aquiring network address message and it never connects hard wired is fine

A:Acquiring network address

use Wired or WiFi but not both - - manage this by disabling the one you DON'T want to use.
Relevancy 24.51%

Can someone tell if there is a way to hide my computers IP Address?
Maxthon is the browser I use, I love it, but I do a lot of business on my home computer and I am afraid of being spied on.
I heard that there are people that can trace it and know everything you are doing, including online banking and private emails and such.
Thank you.

A:Hide IP Address?

Firstly, there's no foolproof way of making yourself "invisible" online. While Tor can give upto 90% masking, it's often slow and still not safe enough. But there are a few things you can do:
1) Follow the EFF's top 12 ways.
2) Refer to the Surveillance Self-Defense manual for complete satisfaction.
3) For computer specific solutions, look here.
Relevancy 24.08%

I have a Dell Latitude D with Windows XP installed on it My Wireless adapter is an Intel R Wireless Wifi Link AGN My current issue is that after my router Belkin F D v crashed and had to be reset I have not been able to access my router It says it is unable to renew the IP address However I am able to access a different unsecured wireless network and my other computer has no trouble accessing the router When I try to run ipconfig to renew address Unable IP it opens the cmd prompt and quickly closes it I can run ipconfig by opening cmd prompt and entering the command from there The only thing that I can think of is that something got messed up after the router crash or its a result of installing Ad-Aware Antivirus which I have since uninstalled and am still having issues Any help would be greatly appreciated thanks Only shows settings for LAN which are IP Address Subnet Mask Default Gateway Under Wireless Network Connection Media State Media disconnected When I try to put a manual IP address into the wireless TCP IP settings it connects to my router for about seconds and then disconnects nbsp

A:Unable to renew IP address

I'm an *****

Leaving this post up for anyone wanting a good laugh... and for anyone else who is also dumb.

I solved my issue by retyping the password.

Nothing like wasting 2 hours over just needing to refresh the password... Ugh...
Relevancy 24.51%

No I am not doing anything crafty I wouldn't know how to anyways. Yes it is for school, I am reviewing questions for my final but I can't figure this one out. Are they talking about their website cause thats easy. Or do I have to find out like what their mega computers ip address is spamming me my sweet bandwidth? If so how?

p.s. hu ray i get to write in bad grammer for a change who learned you how to spoke?

A:How do I find out my ISP's IP address?

Your ISP will have multiple IP addresses.

If what your asking is how do you find out YOUR IP address:

If you want to know the IP address of a particular site, fire up cmd.exe in Windows (start run/search box, type cmd and hit enter.

Then type: ping (or whatever website you need to know).


Pinging [] with 32 bytes of data:
Reply from bytes=32 time=18ms TTL=244
Reply from bytes=32 time=15ms TTL=244
Reply from bytes=32 time=14ms TTL=244
Reply from bytes=32 time=35ms TTL=244

Ping statistics for
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 14ms, Maximum = 35ms, Average = 20ms

That will reveal their IP address for you.
Relevancy 24.08%

Hi everyone This is my first post here Looked like a grreat site with smart people Ok so renew IP network/cannot No address for the first time in my life i purchased a decent computer compared to what No network/cannot renew IP address i have always had and to try and make this a long story short the computer was running fine Got home from work yesterday and when i went to log on it crashed and a window popped uo say windows has recovered from a serious issue or something close to that Then i restarted the PC and it wouldn t find an ip address So i reformatted C and re installed windows xp and still same result The same error msg pops up I have a picture of the error msg with all of the codes but Ot sure how to post it as i am thping this from my iphone So i am at a loss here And any help would be much appreciated I will list what i do know about the computer Windows xp pro Intel dual core ghz gb ram gb HDD Geforce It is sata Cables Sorry i dont know much about computers but that is what i remember him telling me was in it Thanks again P s i did try the run CMD ipconfig and the window just flashes wont stay open I also tried the netsh ip reset with no luck Error signature BCode BCP D BCP BCP BCP OSver SP Product nbsp

A:No network/cannot renew IP address

start here. If it's not a software fix than it sounds like a RAM issue/defect...or PSU
Relevancy 24.51%

Hi My name is Chris and I have been on this forum once before and I found a lot of help regarding my previous issue Today I grace your presence once again because I can not solve this problem and I have been working on it for a while First off I would like won't get IP My an computer address to list my specs Operating System Windows XP Home Edition System Manufacturer Dell Inc System Model Inspiron BIOS Pheonix-AwardBios v pg Proccessor Intel R Core TM Quad CPU Q Ghz Memory mb RAM Modem gt Router gt Switch setup all of other computers internet works So it is not the hardware Yesterday while at work I was doing the My computer won't get an IP address normal when my computer froze up does that sometimes So I did a hard restart when it booted back up my internet card said quot Limited or no connectivity quot So I restarted the router and the modem about times now says the same thing So I decided to go the LAN route and plug directly into the router the LAC says quot Acquiring Network Address quot and it doesn t change from that state So I tried another wireless card downloaded the drivers onto a jump drive and installed it blah blah blah it says the same thing quot Acquiring Network Address quot I called my ISP and went back and forth with her figured out it is not the hardware since all of the other computers get internet access and it is not my ISP s fault because all of the other computers get internet access For the life of me I can t figure out what the hell is wrong with it Any help would be great since I am sitting at work waiting for any answer at all TL DR - My computer won t get an IP address no matter what I do Help please nbsp

A:My computer won't get an IP address

Here is the ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Chris

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Broadcast

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection 9:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Linksys AE1000

Physical Address. . . . . . . . . : 00-25-9C-F0-3D-A5

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . :

Subnet Mask . . . . . . . . . . . :

Default Gateway . . . . . . . . . :

DHCP Server . . . . . . . . . . . :

DNS Servers . . . . . . . . . . . :
Relevancy 24.08%

Hi I m new so hopefully I give you enough info to help me I bought a an IP address Printer does have not Brother new Brother printer MFC- DN Brother Printer does not have an IP address and connected it first to a Mac and then to my PC I can t get the wireless to work and it s too late to return it but it is under a year if I need to use the warranty I do not have an IP address I have been through ALL of the troubleshooting on their site I have reset the Network settings a million times and printed the Network Config page a million times as well Dramatized My printer works flawlessly when connected and I have the correct drivers I can access the printer settings from their software while connected without a problem Here is what the Network Config page says Node type Brother NC- h Ethernet BASE-TX Node Firmware Version Firmware Ver IP Address Subnet mask IP Gateway Boot method Auto Boot Tries IP Filter Disabled Under Protocols They all say Enabled except IPv and LLTD Those are both disabled Also when I go through the settings on the printer itself Network- gt Status- gt Inactive There is more but it s a lot to type so please let me know if you need anything else off that page I have also tried to set the IP address myself I put in because I read that was the default for Brother printers that did not work I also set the Subnet mask to while I tried that How do I make this work It s driving me crazy All I want to do is use Google cloud print and be able to be in my bedroom with my laptop and print No other Brother printer I ve had in the past has had this issue but I always connect them to my PC first DAMN MY MAC I think that s how this happened nbsp

A:Brother Printer does not have an IP address

One more thing I tried

I just went into the Printer control menu on my computer and went to "Properties" as the Administrator. Under the heading Port. I picked a port that was not being used. It is called a "Standard TCP/IP Port" and it's IP is
I thought this would be ok because another Brother printer I don't have trouble connecting to is using one of the other similar ports.

So then I changed the IP address of my Brother printer to this.. Still isn't working but now when I go back to that spot, my printer's model number is showing up and I feel like I might be getting somewhere, just need a little more info.
Relevancy 24.08%

i did a diagnosis with gamebooster and this came up - Event Log ---------------------------------- - Time address IP conflict found PM - Source Bonjour Service - Description Local Hostname Home-HP- local already in use will try Home-HP- local instead - Time PM - Source Bonjour Service - Description mDNSCoreReceiveResponse ProbeCount will rename Home-HP- local Addr - Time PM - Source Bonjour Service - Description mDNSCoreReceiveResponse Received from Home-HP- local Addr - Time PM - Source Bonjour Service - Description ResolveSimultaneousProbe Our Record won IP address conflict found FC A CE Home-HP- local AAAA FE E B ACC CC A - Time PM - Source Bonjour Service - Description ResolveSimultaneousProbe Pkt Record E Home-HP- local Addr - Time PM - Source Bonjour Service - Description ResolveSimultaneousProbe Our Record won Home-HP- local Addr - Time PM - Source Bonjour Service - Description ResolveSimultaneousProbe Pkt Record E Home-HP- local Addr - Time PM - Source Bonjour Service - Description ResolveSimultaneousProbe Our Record won FC A CE Home-HP- local AAAA FE E B ACC CC A - Time PM - Source Bonjour Service - Description ResolveSimultaneousProbe Pkt Record E Home-HP- local Addr - Time PM - Source Bonjour Service - Description ResolveSimultaneousProbe Our Record won Home-HP- local Addr - Time PM - Source NetBT - Description The name quot HOME-HP quot could not be registered on the interface with IP address The computer with the IP address did not allow the name to be claimed by this computer - Time PM - Source Tcpip - Description The system detected an address conflict for IP address with the system having network hardware address -EA- A-C - F-F Network operations on this system may be disrupted as a result - Time PM - Source Server - Description The server could not bind to the transport Device NetBT Tcpip BB A - DF - DCA-AF C- D AC C AA because another computer on the network has the same name The server could not start - Time PM - Source NetBT - Description The name quot HOME-HP quot could not be registered on the interface with IP address The computer with the IP address did not allow the name to be claimed by this computer - Time PM - Source NetBT - Description The name quot HOME-HP quot could not be registered on the interface with IP address The computer with the IP address did not allow the name to be claimed by this computer - Time PM - Source Server - Description The server could not bind to the transport Device NetBT Tcpip BB A - DF - DCA-AF C- D AC C AA because another computer on the network has the same name The server could not start - Time PM - Source Tcpip - Description The system detected an address conflict for IP address with the system having network hardware address -EA- A-C - F-F Network operations on this system may be disrupted as a result ---------------------------------- End of file - Bytes nbsp

A:IP address conflict found

this kind of error is frequently caused by malconfiguration of a static IP address.

First start by making ALL systems attached to your router use DHCP. This will ensure
that the conflict can not occur

Now IF you need a static address, then use the Address Reservation feature in the router;
You need the MAC address of the system to have a static IP address,
to restrict the DHCP range to a small set of numbers, say 2-20, and
the Reserver systemX to an IP address like x.30 (ie above the DHCP range).
Relevancy 24.51%

I have a Linksys WAP54G router. I have users who are connecting wireless. After the fifth person tries to log on to the network, that person gets a limited connectivity sign. Can anyone help me on this?

A:Checking IP address available?

Make sure your router's subnet is
Relevancy 24.51%

The laptop is a few years old and I have never had the wireless working I bought it used a few years ago and I believe it was from a business or set up for a business network I used the restore disk when I got it I did a search before I asked my question and tried quite a few things Here s what I have Toshiba Satellite P -S Cable modem gt Belkin Router running XP Getting limited or no connectivity Network connection details quot unable to renew IP address quot Physical address - - renew IP address Can't D-B -F - IP Address Subnet mask Default gate quot nothing quot DNS server quot nothing quot WINS server quot nothing quot it s wierd because when I checked it again it had no IP subnet or physical I ve tried all of the easy stuff restarts went to the command center quot Can't renew IP address ipconfig release renew ipconfig all quot uninstall on wireless card updated drivers windows It actually work at my friends house for seconds any suggestions I am pretty sure its a configuration problem and I think it has something to do with the way it was set Can't renew IP address up as a business computer Any suggestions nbsp

A:Can't renew IP address

If you have not already tried, just set a static IP address. That should possibly get it to work for a temp fix. The problem also may be a DHCP/DNS issue which I have had in the past. cant remember how I fixied it though. These days when I get a 169 IP the IP release and renew command has fixed the problem.
Relevancy 20.64%

I have a laptop toshiba sattelite with xp I have a cable modem connected to a Belkin wireless router I know the router works because I use my PS with it a lot however I have tried to connect at my buddy s house and could only get renew not address" working "can't IP Wi-Fi it to work there for about seconds after trying for hours It says there is no problem with the wireless card and it has an excellent signal Every time I try to connect or repair the connection it says quot Windows can not renew IP address quot I ve tried a lot I am by no means a computer wizz but I m not dumb and sorry if i m not good with the computer lingo Please help if you can this has been a Wi-Fi not working "can't renew IP address" huge pain in the for me I searched this site for info on a similar problem and found some I did the cmd ipconfig release then ipconfig renew and it seemed to work i was holding my breathe in excitement cause it sad you are now connect to belkin excellent signal but no same thing when i tried to connect booo nbsp

A:Wi-Fi not working "can't renew IP address"

a) google for disable ipv6 and follow the instructions (or use the FixIt) for your version of Windows {XP, Vista, Win7}. Then reboot.

b) google for the drivers to your wired NIC and WiFi adapters - - download and install as appropriate.
Relevancy 24.08%

Hi guys Here is an interesting one for you For a few days now I noticed that issuing DHCP wrong IP address computer on this network has been issued the wrong IP address It is a Windows XP Pro SP PC using a internal Realtek LAN adapter DHCP issuing wrong IP address Using DHCP issued from a wire ADSL router Default DHCP configuration IP Address Range - gt Subnet Default Gateway However this computer has been issued with IP Address Subnet Default DHCP issuing wrong IP address Gateway DHCP Server DNS Server Internet still works but network drive access doesn t All computers are plugged into a NetGear port network switch with cable going to the Wire ADSL router Everyone else on the network is correct and so was this PC up until last Thursday The system was being used in the morning Had a blackout and ever since this problem has occured Trying a few things gives these results Restarting the router and network switch - Made no change Restarting the PC - Made no change Disable Windows Firewall - Made no change Disable AVG AntiVirus - Made no change Disconnected LAN cable - Address issued was the default auto config address Reconnected cable - Went back to Repaired Connection - Made no change IPCONFIG RELEASE - Gave address IPCONFIG RENEW - Gave address Used Setup Network Connection Wizard - Made no change There is only a single LAN adapter in the system and ICS is not enabled Have got them out of trouble by using a static IP address and everything works fine however doesn t solve the DHCP problem Anyone have any thoughts what is going on here nbsp

A:DHCP issuing wrong IP address

NotVeryWiseOne said:

Here is an interesting one for you. For a few days now I noticed that 1 computer on this network has been issued the wrong IP address. It is a Windows XP Pro SP3 PC using a internal Realtek LAN adapterClick to expand...


There is only a single LAN adapter in the system and ICS is not enabled. Have got them out of trouble by using a static IP address and everything works fine however doesn't solve the DHCP problem.Click to expand...

as dhcp ONLY serves to autoconf the client and you've setup static settings, actually you are DONE. The caveat of course is that you would like (I hope) to have one point of control from the DC side. Let's see ...

Using DHCP issued from a 2wire ADSL router
Default DHCP configuration
IP Address Range ->
Default Gateway << atypical here but valid; normally the router is the gateway
.....................................................and it would be at and the dhcp range 2-100

However this computer has been issued with
IP Address
Default Gateway
DHCP Server
DNS Server to expand...

one would hope the DNS would be on your DC or a public ISP; sure bizarre.
(there's a remote chance of something else, but let's defer that discussion for now)

Normally, the client BROADCASTS on x.x.x.255 port 68 and gets back
the DHCP address and proceeds from there.

=== that leads to this issue Node Type = = =

get Regedit
go to the key
set DhcpNodeType = 1 (if not found create a REG_DWORD and get the spelling and case as shown)
set NodeType = 8 (same comment " " )

Looks like the client has junk in the static config.
Use View Network Connections (on the ailing system) right-click Local Lan->Properties
scroll to Tcp/IP, click properties
On the General Tab, click both Obtain xxx Automatically and ensure everything else is empty.
Click the Advance button at the bottom
* IP settings tab: shows DHCP Enabled; default gateway is empty [x] auto metric
* DNS tab: everything empty and [x] Append primary & connection specific DNS suffixes
* WINS tab: at the bottom; NetBios setting [x] Default
.... you decide the WINS and Enable LMHOSTS lookup for your DC
* Options tab: shows TCP/IP filtering; click properties button
.... [x] all three Permit All

Click OK three times to get back to the top, click close

get a command prompt (start->run->cmd (using admin of course)

ipconfig /flushdns
net stop "dns client"
net start "dns client"
(yes, keep the quotes)

disconnect this system from the lan and wait 30 seconds and then reconnect
wait another 30 seconds and rerun /ipconfig /all

the Node Type should show up as Hybrid

Internet still works but network drive access doesn't.Click to expand...

because it is on the WRONG subnet

All computers are plugged into a NetGear 16 port network switch with 1 cable going to the 2Wire ADSL router.

Everyone else on the network is correct and so was this PC up until last Thursday. The system was being used in the morning. Had a blackout and ever since this problem has occured.

Trying a few things gives these results.
Restarting the router and network switch - Made no change
Restarting the PC - Made no change
Disable Windows Firewall - Made no change
Disable AVG AntiVirus - Made no change
Disconnected LAN cable - Address issued was the default 169 auto config address
Reconnected cable - Went back to
Repaired Connection - Made no change
IPCONFIG /RELEASE - Gave address
IPCONFIG /RENEW - Gave address
Used Setup Network Connection Wizard - Made no changeClick to expand...
Relevancy 24.08%

So I own an Hp Pavilion a c with Windows XP service pack with a Linksys WMP GX Wireless-G PCI Adapter Card with SRX updated drivers and all Now invalid address? IP DHCP the issue I am having is that when I attempt to connect to my home network with the correct WEP etc I get a limited or no connectivity message and cannot access the internet I ran the network diagnostics tool and discovered that my adapter was working fine the DNS server IP passed but my DHCP had an invalid IP address I honestly don t DHCP invalid IP address? know what to do I even called my ISP and they said that it was a technical problem with my computer and directed me to Linksys who want to charge me for help I also tried connecting to another network in my neighborhood successfully which proves that its not an adapter problem seeing as it works just fine though that network is unsecured Thanks for any help nbsp

A:DHCP invalid IP address?

first use a wired connection - - that will allow easy access and show that DHCP (used for both wired and wireless) can actually work
Relevancy 24.94%

Your ISP address should be in Belark Advisor. Right? L can't find it, Where should I be looking? CB

A:IP address

if the IP address is ALL you need, see

[edit]Belarc will only show the LAN side address from your router (search the window for address).
This will be your true public IP address only if your system is connected directly to a modem (recommend you install a router).
Relevancy 24.08%

Hello to start with here is a list.

Router 1 (wired from modem) : IP
Router 2 (wireless): IP

I am trying to get these two routers to see each other while keeping the IP Addresses, Router 1 is the main router, which I want to keep at Router 2 is a wireless one which I also wanted to keep at

How do I get computers on the to see the computers and shared files on the

Any help anyone can give, I would be most grateful, thank you

A:I want to join two routers two different IP address

why force this? life gets easy of you keep them both in the same subnet.

You can use two routers, have the first one in control and allow wifi on both if

I'll defer until you clarify your usage . . .
Relevancy 24.08%

Whenever i type in my ip address in my internet address bar(192.168.x.y) the page brings me to "Unable to connect" "FireFox cannot establish a connection to the server 192.168.x.y". I have also tried it in IE but it just google searches my IP Address. Also this problem is usually off and on. One day i can get on and the next day it wont let me access the page.

A:Cannot connect to my router's web page via IP address

first, get a command prompt and enter IPCONFIG

the last line shown as the Default address is your router's address.

If that's the address you already attempted, then

download LSPFIX,
install and run from an ADMIN login, reboot the system and then try accessing your router again.
Relevancy 24.08%


I have a device on my network that I'm trying to ID. I can get the MAC address off the switch, and I need to get either the IP address or the name of the device. How do I do this using the MAC address?

Thanks in advance.


A:How to find a computer name or IP with the MAC address?

download a copy of Network Magic to one system and let it discover the devices on your LAN. even after the trial period lapses, it will still keep the mapping current.

For every device discovered, there are details for the device
Mac addr, IP addr, and device/system info
Relevancy 23.65%

I set up a MAC address access list a couple of weeks back on my Wireless Internet Network and when I try to connect my laptop to it an Error message appears saying that:

Network Error
Windows has detected an IP address conflict
Another computer on this network (i.e. this computer) has the same IP address as this computer (i.e. the laptop). Contact your network administrator for help resolving this issue. More details are available in the Windows System event Log.

The laptop connects but it can't access that Internet. Please help. By the way the MAC address list does include the Laptop's MAC.

Thanks for your help.

A:IP address conflict on network when laptop tries to connect to it

Thank you so much

I am using MAC address filtering and the list consists 4 addresses, a printer, a PSP, the laptop and my desktop. I was trying to make my Router have a Static IP address but I couldn't find out how to do it. When i Set up the MAC address filtering list the laptop was connected to the router and it gave me the pc name and MAC address, so i don't think that it's a typo.

Furthermore which method is safer DHCP Reservation or Static IP against use by others who shouldn't use it. I also have a question that If i change the TCP/IPv4 to use one IP that I've assigned does that make it fully static. and am i right in saying that having static IP's that are different would mean no conflicts between them. But when i tried this it said I have changed the IPv4's on my desktop and laptop to different addresses.
Relevancy 14.62%

Hello guys......I need your help....I have sony vaio vgn-fs515b and after installing windows 7 i was updating its bios......!!!!

Everything was working fine but in between a blue screen came. It said that your system is shutting down due to some problem and at the end it said:

"Dumping physical memory".

When i restarted my laptop all the light were on but nothing came on screen. I don't know what to do.......Please help me........!!!!

I know this happened because of incomplete upgradation of bios but what should i do not?

A:Sony Vaio VGN-FS515b doesn't start after BSOD

The motherboards bios is corrupt. You may be able to correct this if you can pull the CMOS battery and reconnect it. Otherwise the motherboard will have to be replaced
Relevancy 23.65%

Before I explain the problem thank you to anyone willing adapter address Powerline invalid IP problem to help me sort out this mess I have been at it for hours and have come up with nothing About Powerline adapter invalid IP address problem years ago I purchased the Linksys PLK Powerline Adapters to give internet access to an Xbox and PC in a room where wireless connection was slightly cold They worked exceptionally up until just last week I was surfing the web when I noticed that the Powerline adapter invalid IP address problem internet went down and it has been down ever since The adapters are properly plugged in it appears as if nothing is wrong with them- LEDs still flashing and the Xbox and Computer recognize their presence but they won t connect to the web The router still sends out a wireless signal strong as ever I have tried restarting both modem and router I have checked to see if the MAC addresses are conflicting I have made sure that there is no security to mess it up and I have also made sure that any IP address can access my network I have done just about everything I can think of to make this work Before anyone delays their ideas waiting for an IPCONFIG ALL post from me I have already made sure DHCP and Auto Configuration are enabled and I have no idea what ipconfig renew and ipconfig release or whatever it was do but I did that too The computer from the offline room gives me an IP address of indicating no connection to DHCP not totally sure about the DHCP but it definitely means no connection I have both adapters plugged straight into wall sockets not on the same socket as the modem router and am getting frustrated without the internet in this room so if you have any idea what could possibly be the problem I would greatly appreciate it nbsp

A:Powerline adapter invalid IP address problem

The computer from the offline room gives me an IP address of 169.254, indicating no connection to DHCP (not totally sure about the DHCP but it definitely means no connection.)Click to expand...

Yes that's the issue; that address will not exit your LAN and it is the DHCP failure that generated this address.

Verify that both ends of the Powerline Adapter work locally.
the Master is already attached to your router, so bring the remote device into the same room and plug it into a wall outlet there. Now test - -
Relevancy 23.65%

I need a pocket sized address book that can sync with WinXP. Any other tasks the device can do are a plus (and might help me choose). What device has a good address book that could be seen as a Rolodex replacement? Most things like this I've found seem to only be compatible with Windows 200 or older. I don't want my phone loaded up with my work contacts but I want that info easy to access. The most important thing would be the ability to look up the business name and find the names of the people there and other notes about them and the business. Any suggestions?
Relevancy 24.08%

Two days ago, I took my personal laptop off of standy by and tried to connect to my home wireless network. It connected, but I did not get any Internet access. I tried restarting my computer, nothing. I tried resetting my router, nothing. I tried resetting my hub, nothing. Three other computers connect to this network regularly (my dad's, my school laptop, and my sister's laptop) and they have not had any trouble. My Xbox can also connects with no problems. I have reset my TCP/IP and still nothing. I have tried connecting to the router by hardwire and that also does not work. Does anybody have any suggestions?

A:HP laptop will not obtain an IP address

If it connects to the network but not to the internet, try making sure the gateway IP is correct. I've always manually configured my TCP/IP connection IPs, and unless you have the correct gateway IP, the computer doesnt know where to get internet from. (The gateway IP will be the IP of your router)
If you need help manually configuring your IPs, let me know, otherwise, good luck
Relevancy 23.65%

This is my first post and I want to begin by saying that I am not very tech savvy although I am the default computer quot expert quot yikes causes working stop IP to changing on its address printer own in our house as my husband has never used a computer The problem I am having is that IP addresses within our wireless network are changing on their own quite frequently This causes the network printer to stop working Interestingly sometimes the IP addresses switch ie the IP address for my laptop changes to the IP address that the printer had last week etc I know this to be true because I have a quot cheat sheet quot of steps I follow from Brother our printer IP address changing on its own causes printer to stop working manufacturer which includes the steps of obtaining the IP address for the computers and the printer on the network and then pinging the printer I have recorded the IP address on that sheet for each computer and printer IP address and I am constantly having to cross them out and change them Is this frequent IP address change normal Is there a way to establish permanent IP addresses If not or if that isn t desirable is there some way to stop the constant effects it has on the network printer Thank you for your help with this issue nbsp

A:IP address changing on its own causes printer to stop working

Yes this can be resolved two ways
Address reservation and Static IP address assignment.

The former is much easier but I need the make/model number of your router to give HOW-TO details - - -
Relevancy 24.51%

well, i let me begin with a general background. i'm on a wired network. the computer i use most of the time uses windows xp 32 bit software, but i will soon upgrade to windows 7 software, 32 bit again. 32 bit is preferred over 64 bit since alot of older games i play run only on 32 bit systems.

anyway, if i wish to change my ip address, should i change out the motherboard? or is the ip address assigned through the network. the router has a static ip address, i believe. so, when i ping my ip address, i am reading the router ip?

i guess i am just a little confused with the whole ip address thing. thanks for the help guys!

A:IP address questions

There should be no necessity to change the IP address.

The MB does not contribute to creating the LAN Side address you see with ipconfig /all

Lan address: Is assigned by the DHCP service in your router, OR from a static IP configuration on the NIC. Etherway, your Lan - IP is not visible nor accessible from the Internet.

WAN address: is assigned by your ISP OR from the registration process. This is the address for ALL of the systems attached to your router. The NAT feature of the router keeps it all straight.
Relevancy 14.62%

On one rig I got GTS mb and it works flawlesslly However on another machine I got GTS Not 'oh really. so you GTS it crashes, BSOD, Gainward 250 name freezes... great'? gb which Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it earned the quot Piece Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it of sh t quot sticker The issues are usual for the gb model blue Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it screen restart games freeze crash audio loops inifinitely strange psychodelic colorful lines swarm the monitor cubes of various colors do the same And yes it happens in many games and to many people at least according to what I ve found browsing forums As with other people in my case too the issues happen with Bad Company Assassin s creed GTA etc It appears that the problem is with the nV drivers I ve found somewhere that installing a much older version of nVidia graphic drivers solves the issue but I d rather search for help on what to I ve updated BIOS Chipset Audio Lan DirectX nVidia GPU driver is Event Source nv Event ID Minidump files are bellow The error in the Event Viewer appeared on July th EDIT Forgot to mention tha powa is Thermaltek w Forward thanks Kreinzer nbsp

A:Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it

If its the 1gb model, just use a 512, you get like .01% less performance. And you could just update to the latest drivers, maybe Nvidia has since fixed the issues.
Relevancy 24.51%

Hello All,

I am new if i am in the wrong place sorry!!!
When I try to connect to the wireless network my computer will not let me.
When I try to repair it can not acquire a new IP address.
Can anyone help me please.

A:IP address is not renewing

What operating system are you using?

Did it work previously, or is this the first time you've tried it?

Have you tried resetting the wireless router/access point to see if it resolves the issue?
Relevancy 23.65%

okay I hope im posting this in the right place sorry if I didn't. okay I have an hp presario desktop 2004 and i a unable to use the internet because my ipadress has disappeared i have tried turning off everything restarting new cables and everything ipconfig/release renew restore and nothing it won't show up and when i tried the releas it says that it has been released but theres nothing there with the renew it says unable to connect to the RPC driver. I have a cable connection so it's just a modem no router and i just use and ethernet cable to connect to the internet they are all working fine called cable company and they were unable to help either sais it must have something to do with the compter. so if there is anyone who can help please do i am desperate here....

A:Limited no connectivity unable to renew IP address

You have a computer that appears to be sic years old... after six years, several components are often damaged... especially the hard drive.
Do you have the software to format and install a new hard drive?
What is your configuration...
And HP Presario should be a Compaq Presario... I would borrow a computer to download all the drivers, or get somebody to download them for you. If you don't have install disks, you can buy them from HP via a phone call... if they have any left.
When is the last time your computer worked properly and what happened to apparently make it stop working properly.
Do you have a friend who is tech smart to help you take a look at the computer and its components?
Relevancy 14.19%

Hello For the past two weeks my laptop has been beeping It doesn t beep when I first turn the computer on Once I m to the desktop it starts Vista Studio Dell 64 continuous a BSOD with beep and 1536 has to beep and it s VERY inconsistent It may beep every five minutes or every minutes Sometimes it beeps once and other times its beeped two Dell Studio 1536 with Vista 64 has a continuous beep and BSOD or three times fast And occasionally I get the BSOD saying something about quot dumping my physical memory quot On top of that when I load the computer I get an error saying that my Catalyst Control Centre is not working I just assumed all these things were connected A few months ago my hard drive died so I installed a new one I haven t had any issues until the issues I listed above all of which start just a few weeks ago Unfortunately my warranty has expired so Dell s support hasn t been much help So does this sound like the hard drive I installed is creating the issues Any advice is very helpful nbsp

A:Dell Studio 1536 with Vista 64 has a continuous beep and BSOD

Have you checked for crud in your keyboard... any cause for a sticking key, sticking space bar, etc.

Don't see how the hard drive could cause the problem.

Have you looked at all the Dell Beep Codes... They are posted elsewhere on this TechSpot forum... that could give you a starting point.
Relevancy 24.08%

Okay so recently i have been able to connect to my router Via Wireless But then a couple days ago my internet crashed and when i clicked "Repair" It Gets stuck at "Renewing IP Address" I have tried ipconfig/refresh,renew and etc None of it work and my internet is still limited or No Connectivity.But when i use an Ethernal Cable it works. Please Help I'm really frustrated, Any Advice or Suggestions would be appreciated.
PS I have another laptop in my house and it connects to the internet fine. Thanks Again

A:Limited or no connectivity/can't acquire an IP address

verify that the NIC is set to use DHCP for both IP & DNS addresses; remove any static values found
Relevancy 14.62%

So i decided to fire up my brothers computer that he hasnt used for about 2 years and keep running into the bsod with the error about nvlddmkm.sys for my graphics card, the monitor is also blurred as in the colors are distorted and random colors will blurr to the right or the left of where they should be. I can get it to bootup once i go into safe mode and delete the nvlddmkm.sys but when i try and install the latest driver and reboot the same problem and same error pops up. Any advice on how to fix this error? And I was hoping that by installing the newest driver properly that perhaps the blurry screen will clear up, is that just wishfull thinking or could the blurry screen actually be fixed? The computer is running vista 64 with 4g ram and 750w psu. Thanks for the help guys.

A:BSOD video card 8800gtx error: nvlddmkm.sys

as you can imagine nvlddmkm.sys is part of the driver installation so simply deleting it will either cause errors or blue screens. there are a number of things that could be causing this to happen, such as corrupted files, a bad power supply, or even the card itself. the first thing i would advise is to do a clean installation of the display drivers, which requires you to use a piece of software such as Driver Sweeper to completely purge the associated driver files. once this is done, you can restart the computer and proceed to install the drivers normally.

if this fails, you may be looking at corruption in Vista itself or possibly with the motherboard chipset drivers. there's also a slim chance that you need to update DirectX software or frameworks for graphics-based software. if it comes down to having to test the actual hardware, there are limited options. the best way would be to test the card in another computer (preferably one with a different OS) and to test the power supply and RAM if you can. is there any reason in particular that the computer hasn't been used for a couple of years? there's always a possibility that your brother knew to replace something and never did
Relevancy 24.08%


I recently removed some malware from my computer (winxp sp3) but it seems to have left something corrupted. I can no longer connect with wlan, it will hang on 'waiting for the network to be ready' this is becuase I have an invalid IP address. Reseting the winsock does not solve it. Windows diagnostics says the winsock is corrupted but after reseting.. nothing. Also windows firewall will no longer start the ics service. I attach part of the windows diagnostics log, could anyone help me with making sense of it?


A:Trouble connecting. Invalid IP address

Check that the device settings for the network interface have not been set to a fixed IP address - go to control panel > network connections > select your device > right click > properties > double click on internet protocol (TCP/IP) and set the two obtain IP and DNS values automatically.
Reboot to reset the system
Relevancy 23.65%

I need to know how to fix my computer. I cannot connect to the internet and I get a msg unable to contact DHCP server request timed out. Cannot renew Ip address. Did not assign a network address to computer. Please help ! I work from home and if my computer doesnt connect to the internet then I cant work.

A:Can't connect to Internet DHCP and renewing IP address issue

Are you using broadband? Wired or wireless?
If you're using a router and you know its IP address you can try manually giving an IP address to your PC but it has to be in the same range as your router. That is if your router's IP is then you'll have to specify something like to your PC.

You may want to try taking a look here too.
Relevancy 24.08%

For the last year or so restarting address computer without won't IP renew my laptop has taken up dropping the internet connection working with either a wireless or wired connection to the router about every - or so hours it seems to vary and no matter what I do my laptop will not renew the IP address unless I restart my computer It still communicates with the router home network I can still use the printer on our network but refuses to connect to the internet without restarting the computer I have checked that all my internet connections are set to automatic and have tried going into the command prompt and releasing renewing the ip address but this does not work It will not renew the ip address I have to restart the computer every time and occasionally I have to IP address won't renew without restarting computer restart the computer two or three times before it will pick up an ip address All of the other computers on the network work fine wireless or wired Even when our other wireless IP address won't renew without restarting computer computer looses the router signal it will renew its ip address with no problem Only my laptop is doing this Any other suggestions other than setting the network connections to automatic and or using command prompt to renew the ip address nbsp

A:IP address won't renew without restarting computer

What router or routers are you connecting too? Just to confirm this happens to you if your using a wireless or wired connection? Does your network administrator at your work know your using your laptop? Does this only occur at work?

Just thinking out loud until more info is given:
It sounds like the other computers on your network connect and disconnect often, however your laptop is the only computer having trouble reconnecting. The router may be setup to assign identification numbers (for lack of better word) to each computer that connects to it. Duplicates assigned numbers with other computers can cause this. But if your laptop is the only one experiencing other problems then I doubt it.
Relevancy 14.62%

Hello everyone,

I just bought some Hardware to build a new computer from Scratch.

I bought:

1. Asus P5E3 Pro Motherboard (DDR3 RAM DIMMS)
2. PSU Coolmax CUL-750B 750W
3. 2x2GB OCZ OCZ3G10664GK R (DDR3 RAM)
4. VGA Card - ASUS ENGTS250/DI/512MD3
5. Intel Core 2 Quad Q8400 2.66Ghz 1333

I installed Windows 7 x64bit OEM

I am having problems with BSOD (different ones not the same one every time)

I would like to know if its a compatibility Problem with My RAM and Motherboard or could it be something else. I am very bad with Hardware and I just bought parts that I knew could fit in theory.

BIOS is set to default because I don't know how to configure it (Probably thinking why did I buy parts instead of a built computer)

Could you please help?

A:Compatible RAM for Asus P5E3 Pro Motherboard (BSOD)

Your RAM isn't on Asus' memory QVL (Qualified Vendors List)-but that isn't to say that it's not supported.
Having your power supply checked might be an option if your graphics card seems to run slow or you are getting fluctuating performance.
Because OCZ memory modules lack what are called embedded XMP profiles, your motherboard will have difficulty assigning a setting for them so you will need to do it manually.
Download Memtest86+ from here
***under the Memtest86+ v4.00, select "Download -Pre-compiled bootable iso ", save and unzip if downloading the zip file then burn a BOOTABLE CD using ImgBurn or your usual burning software (Nero etc.).- this program runs at BIOS level
Download MemSet here
You can also download CPU-Z -it gives a much simplified version of the RAM timings but you can also access chipset and CPU info. download here

First order of business would be ascertain whether the RAM modules are not defective.
I presume the RAM in question is OCZ's Gold XTC modules - if they are then you can try to manually select the timings- they should be on a sticker on the side of the RAM, which should be 7-7-7-21 ( CAS (or CL)-tRCD-tRP-tRAS) at 1.5 to 1.6 volts.
IF THIS IS NOT YOUR RAM THEN GO NO FURTHER, If it is then you need to set it in order to test it for stability.
Boot into your BIOS. Select the second tab "A.I.Tweaker"
Set PCIE Frequency to 100 (if not already set)
Set DRAM Frequency to DDR3-1066 (if not already set)
Set DRAM Command rate to 2T (if not already set)
Set DRAM Timing Control to Manual
Note the string of timings following "Pri.Information" on the next line-they should be the same as the settings you are about to input.
Set CAS# Frequency to 7 DRAM Clocks
Set RAS# to CAS# Delay to 7 DRAM Clocks
Set RAS# Precharge to 7 DRAM Clocks
Set RAS# Active time to 21 DRAM Clocks
leave the rest of the timings on Auto for now and move down the page until you get to..
DRAM Voltage ....type in 1.60
Hit F10 to save and exit
**If you can boot into windows then run Memset (NOT the Memtest86+ cd you burned!) and note -or better still get a screen capture of the timings (and include in your next post)-here is an example of one of my old screenshots-take no notice of the values but note that both modules SPD (A and B )values are shown-so expand the window.

** If you cannot load Windows then get back to the BIOS and revert settings by choosing Restore Defaults, F10 to save and exit. The likely cause will be insufficient MCH (Northbridge) voltage.
If Memset shows you the correct values and voltage then you can move on to testing.
Reboot and select CD as your first bootable drive
Insert your Memtest86+ bootable cd into the drive
Hit F10 to save and exit
Memtest86+ will boot automatically once the motherboard POST's. As it's a DOS program it is fairly straightforward -The test actually comprises 8 seperate tests. Once all 8 have run then your RAM has completed a "Pass" -for 4Gb a Pass takes around 20-30 minutes.
Run 7 (minimum) to 12 passes. If the testing shows no errors then stop the test at your leisure.
Return to your BIOS, change the boot order back to Harddrive (I assume)
Take the CD out of the drive
F10 to save and exit -congratulations your RAM is stable. The next step would be to stress test the CPU/RAM fo test for stability- but one thing at a time

If the test throws up errors then note the Number of the test and the error code- the test will continue if the errors are not to great. If the testing serquence stops then stop the test, reboot, change boot order, remove cd and F10.
The RAM could fail from either physical damage it has suffered or the timing (and sub-timings) are unstable. We can look into that if the need arises.
Relevancy 24.08%

Hello, a friend of mine is having me work on his computer, and for the life of my, I can't figure out why it's stuck on this, I've reinstalled Drivers, I've added in a new Ethernet Card, Reset my Modem and what not, I'm not understanding what's causing this. Any Ideas anyone?

Windows XP Pro SP3 is the OS.

A:Acquiring Network Address consistantly?

Bad network card. Try a different slot PCI / PCI-E or USB port. Still does it? BNC = bad network card! Get a replacement.
Relevancy 24.08%

I IP and settings Router address cant access my router settings to change my IP address I have a Sky router every time I put in my router settings this Bing thing kicks in bloody MS and I cant get to see what they are I really dont want to Router settings and IP address phone Sky they take forever and I m not sure they know what they are doing Is there anyway to bypass this bing rubbish or disable it I am Router settings and IP address running XP pro on my PC OS I installed a program hide my IP and I have unistalled it but I think I am going through a proxy server as when I try to find my IP address I m in Russia somewhere some pages are blocked some are in Russian Sometimes it comes up with cannot connect to page I check the connections they are fine I think I cant find any way of turning this proxy server off there is nothing in any of my programs if there is anything in Tools I dont know what to look for I cant do a system restore I really need some help here please I hope this topic is in the right place for this problem nbsp

A:Router settings and IP address

Really need MFG/Model number of the modem AND the router (if you have separate devices),

but, get a command prompt (run->cmd) and enter ipconfig /all
the gateway address will be the IP address of the router.

launch your browser and enter http:// followed by the gateway address followed by a / (slash)

you should get the router login screen
Relevancy 24.08%

Hey I m new here made an account just to post this so if this is in the wrong section sorry This computer has cable internet but a computer downstairs has wireless internet Basically I really want to play a game called Warcraft III and later Starcraft II and host games on them To do that you need to have a static IP address and forward ports or something Basically it worked for around a year then it suddenly stopped working I checked saw it changed to dynamic address Internet Static IP/wireless changed it back to static and the wireless Static IP/wireless Internet address internet stopped working A computer person came along changed it back to dynamic and it started working Basically I want to know how I can fix this without any great trouble and without having the internet stop working I was going to link to a guide to hosting which I had read but I need posts for that but just google Hosting on Warcraft III nbsp

A:Static IP/wireless Internet address

We would need to know specific equipment details.
Relevancy 24.51%

Hello , i want to make my ip address fixed. i did that thing about port forwarding so when i open "local area connection status" and click on the support tab , my ip address is fixed every time i restart my pc.

The problem is when go to "" i find my ip address changing . i wana make it fixed . how can i ?

I wana do this because i have an ftp site (and iam sharing it) . every time the ip address changes , i need to go and i change my share link. that's tiring

Please help

A:Static ip address

static addresses have two perspectives
WAN side; your public IP from the ISP
LAN side; addresses managed by your router
What you did was part(2)
To solve the WAN side, you need to

purchase a domain name and get your ISP to support the newly assigned address
OR use to follow the dynamic public address from your ISP
Relevancy 23.65%

I just assembled a Pentium 4 rig with ASUS mobo P4S800D-X and apparently I am having internet connection issue with wired connection. I am connecting through a router and all internet connection are test to work fine with my other computer. I was able to connect wirelessly using a USB internet adapter. It is just the wired connection that is not functioning. I have consulted with ASUS tech support and at first they told me to uninstall the network adapter and reinstall and still problem not solved. Then they said could be a TCP/IP stack issue so they told me to download the SP3 and still issue not resolved.

Does anyone have any issue similar to this that can help me figure out this weird problem?? Thanks.

A:Unable to acquire network address with wired connection

I would first try updating the driver for your network card, and then try a different card altogether.
Relevancy 51.6%

I tried to find the link to introduce myself, and couldnt. I am not very technically advanced. My laptop (its an older one with windows xp operating system home) (my new one was stolen and I am quite depressed about it) now this problem.
I am using my sons laptop now.

I do not have any discs but blank ones. Can someone halp me? My computer will not start, it just displays that message, and when i press f8, safe mode and everything comes up but it never does anything

A:Compaq 2700 <Windows root>\system32\ntoskrnl. exe is missing or corrupt

The hard drive (boot drive) is bad or its contents are corrupted. With no discs, you might want to take it to a friend or to a repair shop to have it repaired
Relevancy 24.51%

I have a HP desktop with Windows XP that I attempted to install a Linksys wireless router to. Prior to installing my internet, which is through cable modem, was working fine. After attempting to install, I was no longer able to connect to the internet and the IP address on my 1394 connection was gone. It says connected and when I go under properties for it shows a blank spot where the IP address is supposed to be. I clicked repair but it says "TCP/IP is not enabled for this connection". I also have a Local Area connection 3 and a Local area connection 4 both state Limited or no connectivity. The 4 is VIA Rhine II Fast Ethernet Adapter and the 3 is Intel 21041-Based PCI Ethernet Adapter. I no longer have the Linksys router and am just trying to get back on internet with that computer. Can anyone help me try to re-establish an IP address?

A:Missing IP address

Do you actually have a network adapter attached to your Firewire (the IEEE 1394) connector?. I'm guessing not and guessing you never had an IP address there

More likely you have network adapters on your Ethernet ports (which are what the other LAN connections you see are referring to)

Click Start->Run, then copy/paste the command line below.
cmd /c ipconfig /all > "%userprofile%\desktop\ipconfig.txt"
The command will put an ipconfig.txt file on your desktop. Please attach it to your next post
Relevancy 15.05%


I have a Dell Inspiron 8600 laptop. At the moment, I have no OS running, as I am trying to reformat my computer. In doing so, I received the BSOD message: partmgr.sys - Address F87C04AB base at F87BE000.

Do I need a new hard drive?

Any help is greatly appreciated. Thanks in advance.


A:BSOD message: partmgr.sys

What Windows CD version are you using to boot with and did you set the CD as the first boot device? I could be wrong but maybe you aren't booting correctly.
Relevancy 14.62%

Hey everyone I m back with another problem This time it s in my personal laptop So about weeks ago a friend of mine installed GB RAM into my nv4_disp Help BSOD infinite loop with laptop After a couple of days with the RAM I turned on my laptop and find my screen flashing red Parts of the screen were pixeled red After backing up my files through safe mode I brought the computer to the college tech support They figured Help with nv4_disp infinite loop BSOD it s a driver problem so they updated my video driver Into what I cannot remember The problem randomly appeared and that forced me to format and start fresh So a new problem arose As the title suggested I randomly get the nv disp infinite loop BSOD Sometimes Help with nv4_disp infinite loop BSOD my screen would just freeze and not do anything Sometimes the screen flashes Help with nv4_disp infinite loop BSOD but I can still move my mouse pointer And it hasn t really been too friendly when I open the only two games I have in my computer in an attempt to see how bad the damage is I looked up some solutions online which included uninstalling and reinstalling drivers After a few attempts of that with the update the NVIDIA website provided I rolled back my driver into driver version So here are some things about my computer Model Dell Latitude D System Microsoft Windows XP Professional Service Pack Computer Intel R Core TM Duo CPU t GHz GHz with GB of RAM Driver Details Currently NVIDIA Quadro NVS M Driver Version Personally I wouldn t mind this problem But I have a final project for a class where I need a video presentation and I am using Pinnacle Studio I m not sure if it s just me being retarded and missing a driver to install but I m pretty sure I reinstalled everything after formatting my computer Any help is greatly appreciated If any more information is needed please tell me so I can attempt to provide you with correct information not completely tech savvy for a computer engineering major ironically nbsp

A:Help with nv4_disp infinite loop BSOD

First of all you have to make sure that the 667 memory and the nvidia driver is compatible with your Dell laptops model, and you should use the Nvidia video and chipset driver from Dell and not from the nvidia site. You can up the shared video memory to 256MB maximum
Relevancy 20.64%


I am trying to connect to my home wireless network and my computer has found the network and will let me connect (after typing in the WEP key), but the status says 'Acquiring network address' and I can't access the internet.

I have the IP address for the network, but don't know how to add this into my computer.

Can someone point me in the right direction please?


A:Wireless network connection - Cannot acquire network address.


if it hangs or shows limited connectivity ensure you are typing in the correct key, some routers will allow a passphrase for wep others want the key in hexadecimal format.
Relevancy 24.08%

I've been very annoyed by this as I've used about three different Routers. I'm under the impression that my Onboard Ethernet is going out. If it is, what type of Ethernet card should I get? (I have a few PCI-E 1x Slots that aren't being used.) =)

A:Having problems Renewing my IP Address?


any type of card will do, if your original is an onboard one you will need to disable it in the BIOS
Relevancy 24.51%

Guys I can't find where to post this so here goes. I am in need of finding a way to track an IP address real quick. Is there a way to do this so I can find what computer the email came from. The ip address is real important I find this.

A:Track an IP address

get a command prompt (run->cmd) and enter
nslookup Server:

​if you google for windows whois, this tool will give you the domain info
$ whois -H

OrgName: EastLink
Address: 6080 Young Street
Address: Suite 801, PO Box 8660, Station A
City: Halifax
StateProv: NS
PostalCode: B3K-5M3
Country: CA

NetRange: -
NetHandle: NET-24-222-0-0-1
Parent: NET-24-0-0-0-0
NetType: Direct Allocation
NameServer: Z3.EASTLINK.CA
NameServer: M5.EASTLINK.CA
RegDate: 1998-05-22
Updated: 2007-03-06

OrgAbuseHandle: AAS50-ARIN
OrgAbuseName: ARIN Abuse Support
OrgAbusePhone: +1-902-453-2800
OrgAbuseEmail: [email protected]

OrgNOCName: ARIN NOC Support
OrgNOCPhone: +1-902-453-2800
OrgNOCEmail: [email protected]

OrgTechHandle: ATS22-ARIN
OrgTechName: ARIN Technical Support
OrgTechPhone: +1-902-453-2800
OrgTechEmail: [email protected]

# ARIN WHOIS database, last updated 2009-09-14 20:00
# Enter ? for additional hints on searching ARIN's WHOIS database.​
Relevancy 24.08%

My wireless internet was working fine for about 3 weeks then all of a sudden it says i have limited or no connectivity on my hp laptop but my ps3 and iphone still get full connection? when i click repair it says invalid ip address and that i need to contact my network provider.... well i did that and everything with them was fine then i contacted my wireless router provider and that was fine.... so i am at a loss i went into ctrl panel and went to network connections and its an automatic IP address ... how do i get my internet working again ?

A:Invalid IP Address- limited or no connectivity

You probably should have asked this problem in the Storage and Networking forum. You might try checking out my reply to a similar problem under the following post: I hope this is helpful.
Relevancy 15.05%


my system:

gigabyte X48TDQ6 mobo
2X2gb ocz ddr3 1600mhz

my problem:

i have run my system for about a year with q6600 cpu with no problems with this mobo,memory,graphic card.

yesterday i have changed my cpu to qx9650 with the intel stock cpu fan. when i play games after 20 minutes i get bsod and the system reboot even in regular use on desktop.

the cpu temp in idele is about 27 deg. (not seems beacuse overhit)

on bios everythind on standart/auto (no o.c).

i upgrade my bios revision.

the bsod is "not less or equel" something:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.
Locale ID: 1037

Additional information about the problem:
BCCode: a
BCP1: 0000000010000002
BCP2: 000000000000000C
BCP3: 0000000000000000
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

thanx 4 any help.

A:Bsod after replacing cpu

look on the box the CPU came in, or run CPU-z and see what the revision is. If it is an E0 you need BIOS F8D beta to run that CPU. At least that is what Gigabyte is showing for that CPU on the GA-X48-DQ6 mobo. I couldn't find a GA-X48-TDQ6 mobo listed on their site. Typo or wrong region possibly? Also check windows updates. There may be something for that CPU, or maybe you need more than SP1 on your OS? Your BSOD screen by the way is referencing a failure to read paged memory.
Relevancy 14.62%

I came home from a vacation after summer everything was my and Just computer new installed now processor gets BSOD's 955) (X4 already Just installed new processor (X4 955) and now my computer gets BSOD's set up in my computer except that I had sold Just installed new processor (X4 955) and now my computer gets BSOD's the Phenom X before I left which left my computer well CPU-less When I came back I bought a new Phenom X So I installed the processor and the stock heatsink and fan that came with it No I m not overclocking the CPU No I m not doing anything else out of the ordinary I ve had this processor installed for at least a week now My computer will just randomly get the blue screen of doom or death and just restart I NEED TO KNOW HOW TO FIX THIS PROBLEM I can t take this anymore I downloaded a program called BlueScreenView by NirSoft so that I can view the BSOD error codes etc etc So I can tell you exactly what BSOD happened and at what time I just need to know how to fix it The three BSOD s I ve been getting are DRIVER IRQL NOT LESS OR EQUAL x d KERNEL MODE EXCEPTION NOT HANDLED x e and PAGE FAULT IN NONPAGED AREA x HOW CAN I FIX ANY OF THESE nbsp

A:Just installed new processor (X4 955) and now my computer gets BSOD's

Sounds like a bios update might help. Version 2606 appears to be the latest for Vista if you have 32 bit.
Relevancy 23.65%

I ve read a few forums online regarding this issue but have not found one that will resolve my problem I have an HP ze that will not connect to the internet I have tried wirelessly and can connect to my router with other devices so I know that is not the issue via ethernet and have even tried using my blackberry as a modem With both wireless and ethernet it says it s connected with limited or no connectivity When trying to repair it gives an error that it can t renew my IP address With the Blackberry thru Standard Modem it shows that it s connected but still no access to the internet I have to admit I m not that tech savvy but I do learn quickly and can comprehend well I ve already tried with the hep of a tech support rep Limited No Unable IP Connection - to or Renew Address most of the steps listed in the previous forum www techspot com vb all windows t- - Unable-to-renew-ip- Limited or No Connection - Unable to Renew IP Address address--limited-connectivity html remove spaces This includes checking Device Manager checking Network Connection properties checking Windows Log errors running Winsock don t remember exactly what but I just wrote in what the tech guy said and I know it had something to do with renew refresh and some other stuff as well as restarting after cancelling all the startups and system stuff in msconfig to make sure nothing was interfering and still get the same the one thing I haven t done is to uninstall and reinstall the driver but I m not sure if that would even help considering it s happening on the ethernet Realtek wireless broadband wlan and standard modem I also pulled up ipconfig all because that was suggested in another forum but not sure what to look for listed below is some of the stuff I noticed not sure if it has to do with anything IP routing not enabled Wins proxy not enabled Wireless Net Connection AutoConfig enabled default gateway is blank IP address physical address and subnet mask all listed Not sure if this makes a difference but I ve also tried connecting to my router s settings url and am unable to pull that page up also I m not sure if I ve tried a static IP or manually setting my IP address because I was doing a lot that the tech rep had me try could someone ellaborate on how I would do that so I could see if I have yet or not I was also thinking of just removing and reloading windows on it anyone think that will help Thanks a bunch Adi P S I have Windows XP home edition Service Pack nbsp

A:Limited or No Connection - Unable to Renew IP Address

Dweebit22 said:

P.S. I have Windows XP home edition, Service Pack 3Click to expand...

What is the security level of your router?
Many people claim they have issues trying to use WPA-PSK2 scurity with Windows XP, and WEP encryption is better.
Relevancy 24.51%

Ever since i hooked up my xbox 360 to my laptop for an internet connection it says i haave an ip address conflict. and im not able to use the internet. and it also affected my desktop too and that wont get the internet. does anyone know how to fix it?

A:Help with IP address conflict

This happened to me too. What happened was that your xbox360 took over the ip adress of your laptop since they are using the same connection. If it is effecting your desktop as well then you need to follow these steps on both the laptop and the desktop.

1. Open the Command Prompt (from the Start button, go to Programs > Accessories > Command Prompt, or just type cmd.exe in "Run".)
2. In the command prompt window, type ipconfig to see current ip address
3. In the command prompt window, type ipconfig /release
4. In the command prompt window, type ipconfig /renew
5. Exit the Command Prompt by typing exit (you can just close it out as well)

Do this on both of your computers.

An alternative would be for you to unplug and reconnect the cat5's from your router and then restart the router. But I would try the command prompt method first. I made myself a batch file using this method so I don't have to type stuff like that in all the time.
Relevancy 14.62%

hi i have been getting random bsod when playing games and sometimes watching videos online says video driver stopped responding sometimes bsod sometimes it recovers says to upgrade drivers which i have doesnt help it has done this with every driver i have installed.

vista home premium
asus p5q pro
ati 4780 512
2/2g corsiar dominator
e 8400 @ 3.00
pc power +cooling 750 w
2/300g vel raptor hd raid o

hers the mini dump please help

A:Random bsod video drivers

Your video card may be over heating
Relevancy 15.05%

Can t seem to find any solutions to this ongoing problem Currently Kernel_Mode_Exception_Not_Handled_M BSOD, using WinDbg to debug issue however I am not having much luck Here are the two latest BSOD Microsoft R Windows Debugger Version X Loading Dump File C WINDOWS Minidump Mini - dmp Mini Kernel Dump File BSOD, Kernel_Mode_Exception_Not_Handled_M Only registers and stack trace are available Symbol search path is msdl Executable search path is Windows Server Kernel Version Service Pack MP procs Free x compatible Product LanManNt suite TerminalServer SingleUserTS Built by srv sp gdr - Machine Name Kernel base x PsLoadedModuleList x af c Debug session time Wed Jul GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Unable to load image navex sys Win error n WARNING Unable to verify timestamp for navex sys ERROR Module load completed but symbols could not be loaded for navex sys Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E c b d ba b Probably caused by navex sys navex f ba Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis KERNEL MODE EXCEPTION NOT HANDLED M e This is a very common bugcheck Usually the exception address pinpoints the driver function that caused the problem Always note this address as well as the link date of the driver image that contains this address Some common problems are exception code x This means a hard coded breakpoint or assertion was hit but this system was booted NODEBUG This is not supposed to happen as developers should never have hardcoded breakpoints in retail code but If this happens make sure a debugger gets connected and the system is booted DEBUG This will let us see why this breakpoint is happening Arguments Arg c The exception code that was not handled Arg b d ba The address that the exception occurred at Arg b Trap Frame Arg Debugging Details ------------------ EXCEPTION CODE NTSTATUS xc - The instruction at quot x lx quot referenced memory at quot x lx quot The memory could not be quot s quot FAULTING IP navex f ba b d ba ffb c a push dword ptr ecx AC h TRAP FRAME b -- trap xffffffffb ErrCode eax ebx e ecx edx esi e caa edi e e a eip b d ba esp b ebp b iopl nv up ei pl nz ac po cy cs ss ds es fs gs efl navex x f ba b d ba ffb c a push dword ptr ecx AC h ds ac Resetting default scope CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT SERVER MINIDUMP BUGCHECK STR x E PROCESS NAME vbda exe CURRENT IRQL LAST CONTROL TRANSFER from b d e to b d ba STACK TEXT WARNING Stack unwind information not available Following frames may be wrong b b d e e d e e e a navex x f ba b bc b d b e e f e navex x e e b d b a c e d ff b ac navex x e b b a e e f f e dd acd b ac navex x a c b b b a e e e d c e dd acd navex x ce b c b d navex x d e b c e e d c nt ExFreePoolWithTag x a STACK COMMAND kb FOLLOWUP IP navex f ba b d ba ffb c a push dword ptr ecx AC h SYMBOL STACK INDEX SYMBOL NAME navex f ba FOLLOWUP NAME MachineOwner MODULE NAME navex IMAGE NAME navex sys DEBUG FLR IMAGE TIMESTAMP b c FAILURE BUCKET ID x E navex f ba BUCKET ID x E navex f ba Followup MachineOwner --------- Microsoft R Windows Debugger Version X Copyright c Microsoft Corporation All rights reserved Loading Dump File C WINDOWS Minidump Mini - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is msdl Executable search path is Windows Server Kernel Version Service Pack MP procs Free x compatible Product LanManNt suite TerminalServer SingleUserTS Built by srv sp gdr - Machine Name Kernel base x PsLoadedModuleList x af c Debug session time Wed Jul GMT- System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck E c b ef a b a a c Probably caused by hardware afd AfdTransmitFile a Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis KERNEL MODE EXCEPTION NOT HANDLED M e This is a very com... Read more

A:BSOD, Kernel_Mode_Exception_Not_Handled_M

you might want to post this in operating system and software.
i would suggest reinstalling windows myself.
Relevancy 15.05%

Just got a gift from a friend. A Panasonic CF48E. Put a new HD in it, Installed WIN XP pro, and was happy... NO sound.. Looking at the Control panell, looks like the Multimedia Audio Controller has a ( ! ) in the yellow circle. Downloaded what seems to be the correct drivers for it, ir starts to install but mid installation I get the Blue SOD, that says portcls.sys, and it shuts down, and restarts the laptop real fast ( no time to read what the blue screen says..
Anyone see that problem before?
Any solutions? I read all kinds of suggestions, but none work.
Help please.

A:Panasonic CF-48 E Portcls.sys BSOD

Try here:
Relevancy 15.05%

i was redirected here from the BSOD help as it may be a hardware problem I have a Gateway laptop running Windows XP media center edition with SP and whenever i try logging in it either boots me before loading up or within the first - seconds i have tried running in the last good configuration and safe mode but they dont work it just shuts off without a blue screen the screen has had trouble in the past and doesnt work well now so it is plugged into a computer monitor could that be the reason its having problems the thing is it has used this monitor for a good months at least before having problems I lent the laptop to my girlfriend so she could have a computer in her room with internet then it started doing this there is nothing of major importance on this computer so i really just wanna do a full system restore or repair but i dont know how The system wont stay on long enough and i dont have my cd key either i did just have one successful log in with an error report i am doing the list of things in and log hardly can BSOD microsoft says to do currently looking for updated drivers EDIT BSOD d then got back in and performed a BSOD and can hardly log in quick scan found nothing doing a full scan in hopes it finds something helpful nbsp

A:BSOD and can hardly log in

Memory or failing hard drive... You may have to take it in for service. What kind of scan, memory?
Relevancy 15.05%

Recently i suffer from BSOD on a daily basis. I can't put any finger on the reason, cause i see no rule. I suspect Outlook 2003 or AVG.
I have attached the the dump file. I dont know how to read it.
Please advise.


What hardware or software did you install just prior to getting bsods?

Your current minidump shows "Stop 0xBE"

Which indicates that a driver attempted to write to read-only memory.

Possible Resolutions:

? A Stop 0xBE message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.Click to expand...

Since you suspect AVG and since others have reported issues with AVG8, you may wish to try (Free products, available here)
Avira ...
or Avast ...

Because of reported security issues, I do not use Outlook, so others will need to assist you there.
Relevancy 15.05%

Hello... I'm new here.

I was using my laptop and there were updates. So I installed them before shutting down... but after I checked up on it again, there was a BSOD. The error was Stop Error 000000050: PAGE_FAULT_IN_NONPAGED_AREA. Somebody help me please. My laptop is a Toshiba Satellite A215-S4747.

Thank you

A:Toshiba Laptop BSOD

Re: 0x50 errors

Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages.

Possible Resolutions:

? If you added new hardware recently, remove and replace the hardware to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the hardware manufacturer to determine if the component has failed.

? Stop 0x50 messages can also occur after installing faulty drivers or system services. If the file name is listed, you need to disable, remove, or roll back that driver. If not, disable the recently installed service or application to determine if this resolves the error. If this does not resolve the problem, contact the hardware manufacturer for updates. Using updated drivers and software is especially important for network interface cards, video adapters, backup programs, multimedia applications, antivirus scanners, and CD mastering tools. If an updated driver is not available, attempt to use a driver from a similar device in the same family. For example, if printing to a Model 1100C printer causes Stop 0x50 errors, using a printer driver meant for a Model 1100A or Model 1000 might temporarily resolve the problem.Click to expand...

Can you boot to safe mode? (f8 after power up - and after bios password if enabled).
From safe mode, right click on my computer, click on properties, click on "hardware" tab, click on "device manager" button.
Check for yellow or red flags... roll back drivers these drivers if possible.

I would like for you to check for memory errors as well...
Use Memtest... See this tutorial...

Since these errors can have many causes...
I would like for you also to go to the Virus and Malware board, and follow carefully the 8 steps.
See here

Until we can get a stable system for you, you may need to download the tools to another computer, and then burn them to a cd for use on the Toshiba.
Relevancy 14.62%


When I try to use winrar to unrar a compressed file or something like that, it appears de blue screen and I hear the sound of the hard disk powering down I think (it's the same noise that the hard drive makes when I turn off my computer)

This problem started few days ago when I installed Jdownloader but I don't thing that the problem is related to it.

History: a year ago I got 2 hard drives in raid 1 mode and they failed but the disks are ok. I think that failed the motherboard's raid controller or disk controller. I've got the same mother with a diferent hard disk for a year ago.

Please help!


A:Bsod, Kernel Stack Input Error

Sounds like a memory problem... Test the system memory
Relevancy 14.62%

i am having a little bit of an inconvenience with this pesky bsod error message it reads hardware malfunction call your hardware vendor for support NMI Parity check memory parity error the system has halted i have been skimming through forum threads from around of people having a similar problem but they all had dells and it occurred mostly in laptops i have got a heavily modded hp d small form factor desktop in fact the malfunction error hardware Bsod only thing i have that has anything to do with dell is my two monitors and a little CAT wired network Bsod hardware malfunction error pci adapter i installed a gig of ddr Kingston ram a agp video card and that dell net adapter all at the same time the problem started happening like a couple of weeks after that the old thread that i found is pages long and i haven t had time to read the whole thing i think it is that netcard but i dont want to open up my case take it out and the problem still occur so i wanted to know if anyone knew whether it is or isn t the problem b c like i said i upgraded other stuff at the same time thanks zach nbsp

A:Bsod hardware malfunction error

The parity check error is a likely pointer to defective (or poorly seated) memory,
Please run memtest... See this tutorial...

Note that memtest should be allowed to run a minimum of 7 full passes. Each pass has eight tests of inclreasing complexity. This means that it will run a while. Allowing it to run overnight should give it enough time. Since it runs from its own environment, windows bsod will not be a problem. Any errors means you have one or more defective memory modules. If you find errors, you may wish to run Memtest on each module. If you bought the memory as a kit, you will likely need to RMA both modules.

Please also include some of your minidumps as attachments to your next post.
The name and model of your MB would also help. Some MB's are notoriously touchy about the ram that you use. If your Kingston ram is not on the MB maker's list for your board, this may be the problem.
Relevancy 15.05%


I've been playing EVE online on my HP510 fine for several months when all of a sudden I am getting a blue screen with reference to Page in non paged area - further down the screen it mentions ialmdev5.dll. The machine uses a Mobile Intel 915GM/GMS 910GML Express Chipset for it's graphics and has worked fine the last couple of months.

I have downloaded the latest drivers from the HP site site, and have run 3x different memory test programmes - none of which found an error since I understand there can be RAM issues which cause this.

I am a little confused what could suddenly stp the thig from working - there was no patch and I have not installed new software,

I'm at a bit of a loss what to do now - any ideas or help?

A:BSOD - possible graphics problem?

ialmdev5.dll is an intel chipset driver. Go to HP's support site under your computers model and download and install the Intel Chipset drivers
Relevancy 15.05%

Hey people Now i know theres probably alot of threads on this topic already but this problem is a Just sick bsod problem - this ATI of about little different to what people have been describing I just helped my friend build his computer and i recommended all the pieces and put it all together installed everything etc Anyway about - minutes into a game it ll crash to the bsod Here s the interesting bit I used to have an ati card myself and it would do the exact same thing with every game i played My friends on the other hand so far its only doing it on NFS - Undercover and the latest Prince of Persia My hypothesis is the game loads into the ram but somehow or another the ati drivers do something crazy and stop unused data from being discarded Just about sick of this problem - ATI bsod out of the ram so it fills up the ram Just about sick of this problem - ATI bsod then the pagefile then crashes to bsod Thats my theory If anyone has any idea of what Just about sick of this problem - ATI bsod the hell is going on here it ll be greatly appreciated Here s his pc s specs case - nzxt tempest psu - antec truepower quattro w mobo - asus m a deluxe cpu - amd phenom am ghz ram - corsair ddr x gb mhz model no AL-TWIN X - C DF graphics - gigabyte hd hhd - seagate barracuda tb os - windows vista ultimate x sp I came to that hypothesis because when i had my ati card depending on the amount of ram the game used greatly factored how long it would take to crash to bsod I ve been looking around and so far i ve found these theories of how to fix it ati drivers werent tested properly on -bit vista the latest CCC drivers screw up big-time its dodgy memory There s alot more i could list but they re just a load of crap i m pretty damn sure its not the memory since we played crysis warhead on it for hours straight It could be the CCC but i dont think it is if it was i think it d be more of a driver problem then anything else which means uninstalling CCC won t make a difference I m really thinking it s a vista -bit problem but i cant find out until he brings the comptuer back over to my house So does anyone think they know whats going on here I m not a junior in computer repair i ve built and repaired plenty of laptops and computers to know what i m doing but i ve never needed to use a debug program so i might need some insight into how to do that if anyone needs a debug report or whatever Again thanks nbsp

A:Just about sick of this problem - ATI bsod

Try updating the ASUS motherboards bios
Relevancy 24.08%

Hello there My computer has been having this very weird connection problem since last week It comes and goes for the past weeks At first I thought it was a virus problem so I formatted my computer But the problem is still there even after the Cannot address format renew after IP even format My computer is connected to a wireless router through an Ethernet cable After the format I figured maybe Cannot renew IP address even after format it was the router or modem s problem so I power cycled both of them but no luck Then I tried to connect to the internet with my laptop Both wired and wireless work on my laptop so it must be a problem on my desktop I can connect any time on my laptop so it must not be a problem of ISP modem or router I had also tried plugging the cable straight into the modem with my desktop when there is a connection problem but it won t work The same problem occurs before AND after format Every time after a restart or shutdown the LAN connection info in the network place will be correct and it shows that I m connected But then it either works or it won t When it doesn t work I will renew the IP but then it will not work anymore I had isolated the problem down to the hardware of my desktop Is there any way I can figure out which part is failing on my desktop nbsp

A:Cannot renew IP address even after format

EVERY router out of the box has a firmware update and once updated this problem
is usually corrected.

the problem is in the software control for release/renew
Relevancy 14.62%

After fitting 8gb of crucial ram in my pc, i went back to crucials website to try out the memory scanner tool just out of curiosity. As soon as i try to run it it gives me an instant BSOD!! This happens on my brothers pc also. He has 8gb of diffrent brand ram. Any one else have/had this problem?

Its not really a big issue, im just curious.

A:Crucial memory scanner BSOD

Does this really matter? If everthing else works ok...
Relevancy 15.05%

hey guys...

i hope you guys can help me....i'm really having a hard time figuring out why pc goes blue screen of death whenever i play with garena(gg client)....when i had always crashes(bsod) even on 1v1!!!!i switched to xp and it still crashes 6 out of 10 times.....but when i play on my doesnt bsod... the worst thing it can do is shut the program....only happens rarely.....

i have a laptop computer with:

T2050 1.6 ghz
2gb ram
intel gma 950

i hope you guys can help me with my problem.....thanks!!!

A:BSOD on warcraft dota?

The laptop may be overheating...
Relevancy 15.05%

Wondering if anyone can help figure out why I'm getting this error.
Stop 0x0000008E(0x00000092,0xA65CDFEC,0xBA4D3BC8,0x00000000)
CHDAU32.sys Address A65CDFEC base at A65BD000
My laptop is a Lenovo Thinkpad T400 model 2765T6U. I purchased it in January of this year and I'm upset that there is already a major error.

Other specs: Intel Core 2 Duo P8400 @2.26Ghz with Intel Turbo Memory (2GB)
Cache Memory L2 Cache 3MB
Ram: 2GB DDR3 SDRAM 1066mhz PC2-8500
HD 160GB 7200 rpm
Graphics Card: ATI Mobility Radeon HD3470
OS: XP Pro Service Pack 3.

Since it was just purchased there have been no hardware changes. Thanks for the help.

A:Help with BSOD

Read: All about Minidumps and diagnosing them

Please check: Start-> Run-> C:\Windows\Minidump
For any Minidumps to Attach
Relevancy 15.05%

Got BSOD with xcfe.sys address 93606F02 base at 93605000 datestamp 4899d276.

I am currently not able to get computer to post at all no other issues before hand

7750 Kuma
780g FullHD ASROCK
4670 Radeon
4GB (2X2GB) OCZ Ram
Vista Ultimate

A:Xcfe.sys BSOD

No idea what that is. Is the CPU fan running and can you hear the hard drive spinning? Remove all peripherals inside the computer (if it's not a laptop) then put them in one at a time, turning off the computer before installing the next peripheral, then on again etc. If the computer works without one of the devices then you found the culprit. Do the same with the RAM if you have more than one module. Could be a number of things. Also test the power supply with a multimeter or power supply tester. Let us know?!
Relevancy 15.05%

Hi I got a new Inspiron laptop just a couple of days ago Its a T C D Ghz processor intel chipset with integrated graphics gb ram I had to reinstall vista after it went into Multiple BSOD a continuous loop - configuring updates shutting down confiiguring updates - after some windows updates None of the windows startup repair options worked Now after the reintall I am getting a lot of BSODs errors shown are IRQL Multiple BSOD NOT LESS OR EQUAL MEMORY MANAGEMENT REGISTRY ERROR and PAGE FAULT IN NON PAGED AREA most common being memory mgmt chkdsk shows no errors the memory test in the startup repair shows hardware errors with a msg that I need to contact the manufacturer Have updated all drivers and the bios but all that has changed is that the number of bsod instances have reduced from per hr to or Also in several instances the BSOD is preceded by services such as RPC Bluetooth wireless shutting down with the event viewer showing registry is corrupted Not sure what the problem is though have a feeling its something to do with a faulty RAM nbsp

A:Multiple BSOD

If you want to test your RAM use memtest:

1. Go to and download the latest ISO version. It is free and perfectly safe.

2. Burn to a CD.

3. Place CD in your drive and reboot with CD in drive. (You might have to place your drive as first bootable in your BIOS) The test will take over.

4. Let it run for a LONG time. The rule is a minimum of 7 Passes. There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

5. If you have errors you have corrupted memory and it needs to be replaced.

6. Also, with errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don?t need to run the test any further on that stick.
Relevancy 15.05%

Im working on my friends computer and it keeps crashing Specs MSI MS- Ver Intel Celeron Ghz MB Kingston PC New nVidia GeForce Mb AGP x GB Hitachi Hard Drive Sony DVD CD Burner watt Thermaltake PSU At first the on-board VGA stopped working I replaced it with a even reformat BSOD after Random AGP card and it worked fine for a month before it started having problems The original of the original ram sticks in bank stopped working Kept getting random BSOD s so I tossed the old Random BSOD even after reformat ram and left in the new Kingston stick Installed the new stick and it still BSOD s randomly They were very random but I got one written down x E xC x xB x IRQL NOT LESS OR EQUAL I thought Ram So I ran the stick on both DIMM slots with memtest multiple times and it found NO errors CPU temp oC at idle Random BSOD even after reformat cleaned heatsink applied AS still BSOD Next I broke the system down to the basics PSU CPU RAM Video card HD CD drive STILL BSOD Next I swapped out the PSU still BSOD Test hard drive with HDAT Hitachi drive fitness passed Reformat HD and reinstall Xp Pro not loading any Mobo drivers still BSOD Installed Mobo drivers minus nVidia drivers still BSOD Removed front panel USB connectors Swapped HD full format reinstall OS still BSOD Swapped Video card still BSOD BIOS is up to date only add-in card is the Video card I am at a loss spending wayy too much time on this thing Any help would be appreciated I know mini-dump files would be some help but I just re-formatted the HD again and havent reloaded the OS yet and im beat for now The only things I havent crossed out are the CPU and Mobo Are there any DOS based programs that I can use to test it The only boot disk I have ATM is Hirens Im guessing the Mobo may have crapped out especially since the on-board Video broke The on-board LAN works intermittently The system was built by another dude two years ago I dont see any damge on the Mobo Please help Thanks in advance nbsp

A:Random BSOD even after reformat

Sounds like the Chipset is knackered to be honest, it seems to be having problems across the entire spectrum, so I'd say it's the motherboard.
Relevancy 24.51%

Hi, I'm new here but hopefully someone can help me out.

I'm trying to get to a site that has only stopped working for me this past friday. I can access it from work and my BlackBerry but not my personal computer (but was able to before last friday)

I've spent over 4 hours on the phone with my ISP/Router company

Thank you and I await a response

A:Address not found

Go to:


Open the hosts file with notepad. Is there anything listed in there (after all the lines with beginning with #) other than " localhost"?

Also try:

Open a command prompt (start, run, cmd, enter)
Type: ipconfig /flushdns
Close the command prompt window
Try to access the site again.
Relevancy 15.05%

Hi all well i m hoping you guys can help I have recently purchased a new system i GTX and Msi Pro mobo with some ram of course I m getting random BSODs From what I can tell anyway I performed the memtest thingy all night last night with no errors I first installed XP sp on it and started getting BSOD randomly so I installed help new i7 Pro BSOD GTX260 MSI Windows bit which I have on it now however the same thing is BSOD new i7 GTX260 MSI Pro help happening I m usually quite good with these BSOD new i7 GTX260 MSI Pro help things but this time i need help I ve done the searches on the net but to no avail I dont know where to go next I m considering buying a test vid card for bucks just so see if it still happens with it installed but dont really want to Oh some specs Inno d GTX drivers - not oc d Corsair HX psu i - stock speed not OC d in any way MSI pro x -latest Bios crappy kingston gb ram all they had at the time Win Bit - fresh install build x WD Gb hdds in Raid Antec case As far as I can tell the ram is ok I ve tried changing the pci slot that the vid card is in but same thing Latest nvidia drvs for Win bit Hope to hear from you all soon nbsp

A:BSOD new i7 GTX260 MSI Pro help

hi wolf

Please upload your minidumps so we can have them analysed.

Relevancy 15.05%


Ive have attached two of the latest minidumps


System specs including OS & SP would help. I am looking at a dump right now, assuming XP sp3
Your error on the second dump was 0x50 ...
But the Widbg report points to Vista... so you are not running XP...
I suspect this information is still valid.

This kind of error is usually associated with a memory problem.
Download Memtest86+ from
Let it run for at least seven passes and see what it comes up with.
There are 8 tests per pass, and it will take a while...
If you start getting errors, you can stop, and remove one stick ... test the sticks one at a time to isolate the issue.
If your memory comes up clean, we can explore other options, but this is the likely place to start.

From MS

These errors may be caused by one or more of the following:

* Hardware failure (memory, processor, or motherboard).
* Anti-virus software that is running on your computer.
* Drivers installed by third-party software.

To resolve these behaviors, perform one or more of the following: Replace the f...
To resolve these behaviors, perform one or more of the following:

* Replace the faulty hardware. You may be able to determine the faulty hardware by running diagnostics provided by the manufacturer. Please contact the hardware manufacturer for more information.
* Disable any anti-virus software that is running on your computer. If the STOP errors no longer occur, contact the anti-virus software manufacturer about a possible upgrade.
* Disable any third-party drivers that may be running. If the STOP errors no longer occur, contact the third-party manufacturer about a possible upgrade.Click to expand...

Your first dump showed a different error.... 0xD1 error and these are almost always caused by faulty drivers/buggy software.
the analysis points to ntoskrnl.exe which is too general to help. In another case, video drivers were at issue...

Are your video drivers updated?
Did your issues begin after starting some new activity? (like a new Game perhaps?)
Since both errors (0x50 and 0xD1) can point at drivers, this might be the place to start.
Relevancy 15.05%

This is a problem I ve been having for some months now I ve tried to troubleshoot my entire computer from day one and I ve gotten rid of lots of different problems One problem remains wont BSOD after PC boot though Some times often during the night or other times where I m AFK for a longer period of time - hours maybe shorter I get an ugly BSOD on my screen After this BSOD my computer wont boot In order to make the computer boot up I have to manually flash the BIOS something that gets very annoying in the long run What happens is I shut it down removing the BSOD I then turn it back on but no components are responding The screen is black gets no signal the keyboard has no signal the num- and capslock lights doesn t respond and the mouse s lazer is off I can t hear the HDD working either Has anyone got any idea what is going on PC wont boot after BSOD The BSOD BCCode returned is as follows BCCode c BCP C E BCP C BCP B BCP OSVer SP Product The quot BCCode C quot error is not familiar to me I can t even figure out what it is using Google so I guess this is sort of a last resort I would also like to know what Product is This product ID has appeared on every BSOD error I have gotten so that would probably help out a lot I hope some of you can help it would be greatly appreciated Specs Corsair Powersupply W Black ATX EPS MSI P Platinum Corsair Dominator TWIN X C D MB Intel Core Duo E GHz HIS Radeon HD MB IceQ nbsp

A:PC wont boot after BSOD

"I have to manually flash the BIOS"...

Do you actually mean "reset" the bios?

Does the computer keep the correct time when it is running? The CMOS battery may be dead or the motherboard is defective
Relevancy 14.62%

hi all Recently i have been having problems with my geforce gt agp video card In games mostly ut k after a while the computer will freeze for about seconds then crash with a bsod saying that my video bsod loop 6600gt with Infinite driver was caught in an Infinite loop bsod with 6600gt infinite loop I am using driver version These drivers use to work perfectly with this card I have been using them for months and had no problems until recently I heard that these are the best drivers for this card I tried reinstalling the video drivers which worked for about an hour but then it crashed again After uninstalling the drivers i made sure every trace of the old install was gone by using driver cleaner pro so the drivers shouldn t be corrupt or conflicting with something Ive also tried other driver versions but they had the same issues The card does not seem to be overheating At the time it crashed the temp measured degrees Could this be an issue with my video card Could it have something wrong with it Or am i overlooking something here Thanks Nissanman nbsp

A:Infinite loop bsod with 6600gt

If you've already tried Driver Cleaner Pro, perhaps giving Driver Sweeper a try might produce better results. It's a very similar program, but I've used it many times and I've found, on some occasions, it to work a little better than Cleaner. Have you recently patched the game or downloaded any additional content for it. Have you tried reinstalling the game? 66 degrees is a little toasty, but it shouldn't crash the card unless the thermal is starting to lose its heat dissipation. You could always reapply some thermal compound, like Arctic Silver, to the core and see what happens. If you have the fan running at stock speeds, you can download RivaTuner to adjust it during games. Usually, a game will start to lag a bit, there may be some artifacts, and then it will quit if the video card is overheating. A BSOD is usually the product of misconfigured or incompatible software (i.e. the display driver). In your case, it's the configuration.
Relevancy 24.51%

My nic keeps loosing its IP address

MOBO is a Jetway J939GT4-SLI-G Nvidia chipset i will fill in with more detail later

When I try to repair the connection it locks up the WS and forces to reboot weather I try the repair button or ipconfig to get a new ip address.

If I manually configure one it locks up as well.

I reload the drivers it will work for less than 12 hrs and then get APIPA.

Reset DHCP release time to 30 days to see if it would help still no luck

I have used the drivers from Jetway which doesn?t list the exact mobo I have.

Used drivers from Nvidia and no luck with those either.

Can any one help

A:My nic keeps losing its IP address

what's your ISP connection (DSL vs Cable) and

do you have a modem? update the firmware if so.

oops; grrr; of course you have a modem; do you have a ROUTER?
Relevancy 24.51%

Hey I hope this is the right section of the forum to post this I recently had trouble with my computer and reformatted and then had no audio so I posted my specs on the site in hopes of finding a driver for my audio card I was helped almost immediately and got my audio working in no time Shortly after that I restarted my computer and had my Network Connection try to quot Aquiring IP (even after address reformat) 169.254 IP address I tried a clean reformat again after fiddling with it for hours and finally found out I had a static Ip that could not be released or renewed no matter how hard I tried After reformat I had blank entries and tried the ipconfig renew command and was met with the address again even after a clean start Also met with the unable to contact DCHP server Request timed out My Cisco teacher informed me that I probably just needed a driver for the mother board I was wondering if anyone could help me find the correct driver for the onboard NIC which might solve the issue My specs are 169.254 IP address (even after reformat) Intel Pentium CPU GHz Motherboard No manufactuerer given Model P X - SOYO Dragon Motherboard Chipset VIA PT VT Rev BIOS Phoenix Technologies Ver PG gigs of RAM gig of HDD space Running Windows XP Professional Edition Clean format as of today Sorry to double post but I want to thank the forum and all the great members in advance for their speedy responses great help and genuinely nice people Thank you and I hope someone can help P S Also checked the Intel site for any drivers but could not find any nbsp

A:169.254 IP address (even after reformat)

i have seen NIC's fail to obtain DHCP because of firewall issues as well as partial hardware failures.

Disable all firewalls.

You might also try to set a static temporarily to see if the NIC is functioning. if that works, but it still will not obtain DHCP, replacement of the nic is the solution.

now that i have 5 posts: look here:
Relevancy 15.05%

I have a problem with a pretty old sistem: spontaneous restarts and BSODs.
I formatted and reinstalled the OS,
I tested the RAM with MEMTEST86(no problem),
I tested the HARD DISK(no problem),
I changed the IDE cable,
I changed the power supply(500w),
I changed the Video and the problem persists.

my sistem :
- amd sempron 1800+
- 512 MB RAM pc3200
- asus a7n8x
- nvidia nforce fx5200
- dvdrw teac
- hdd western digital 200gb

I forgot to mention that sometimes i receive the message :"Warning!cpu overspeed!" when BIOS performs the "system inventory" and sometimes my cpu figures "1150Mhz", altough sometimes my cpu figures "1800+".

I hope you can help me with some advices.Sorry for my bad english.

A:Bsod, restarts - please help

Your motherboard is old. It might have some bulging capacitors around the CPU. Be prepared to buy a new motherboard, CPU, video card and memory... Or save for an entirely new computer
Relevancy 14.62%

I can t seem to get my cpu past ghz without getting bsod right after the windows loading screen Is it just my rigs limit or is there any way to get it past ghz My specs are motherboard ga-m sli-s rev cpu amd athlon windsor ram becuase wintec is a quot registered dealer of aeneon memory quot i have gb sticks of wintec ampx ddr and gb sticks of aeneon ddr that say wintec ampx on them psu bfg tech LS- os windows vista bit home basic oem The multiplier is at and I cannot get the cpu or is it really the fsb but my bios says cpu past without a crash at the windows loading screen and I have tried changing the cpu voltage a little but not the memory voltage My temperature never gets past c with the cpu or is it the fsb at during stability tests I noticed in easy tune it says that my ram has been overclocked as well is that why its been crashing Here is a picture of my bios overclocking options http i photobucket com albums oo giganotasaurus bios overclocking jpg nbsp

A:Can't get CPU past 3ghz without bsod after windows loading screen

You might be able to get to higher speeds by pushing the CPU voltage, but that would make it run hotter. Core temperature scales in a linear fashion as core speed in MHz is increased, but core temperature scales geometrically when voltage is increased. In addition to higher temps, voltage increases reduce the life of the CPU. So basically I'm saying bump the voltage (at your own risk).

Make sure you're not FSB or memory limited by putting the CPU multiplier as high as it goes and the memory at the lowest possible speed. Put memory voltage to ~2.1v. I don't remember much about overclocking AMDs besides that basic kind of stuff.

According to The Overclocking World Record Database, the world record for Athlon 64 X2 5600+ Windsor core is 4151.4 MHz with a 1.68v core voltage. Setting your CPU to this sort of voltage is likely dangerous, but I'm just throwing that out there for you to show that 3 GHz is not the limit of these CPUs. Your particular chip might not clock any higher though so don't get excited
Relevancy 15.05%

Here s my problem a couple of weeks ago I started getting the BSOD with the most frequent message of quot Beginning physical memory dump quot Eventually I formatted and reinstalled windows still no success I ve updated drivers added registry scanners But no matter what (BSOD) Assistance appreciated I do the system gets worse I thought maybe it was because of a conflict with something I got from windows update But I m not tech savvy enough to diagnose and fix it I ve attached my PC stats from everest and I ve zipped and attached my minidumps If anyone could help me fix this it would make my day Also here are the logs from my event viewer I only have the ones since I reformatted Please let me know if you need more (BSOD) Assistance appreciated info EDIT Okay there is a forum for BSOD errors any chance a mod could move this thread I tried reloading the winzip (BSOD) Assistance appreciated file for some reason its not going through nbsp

A:(BSOD) Assistance appreciated

Sounds like unstable hardware, probably a power supply issue. Do you have another power supply that you can try?
Relevancy 14.62%

Just bought a new pc and a seperate copy of windows vista ultimate. I inserted the disk and I got to the screen that said "loading windows files" then after this it went black for a second the blue screen of death appeared.The first part of the error code was 0.0000007F and the rest were 0's. Anybody had this or know what it could mean? Here are the build

G31-M7 TE motherboard
intel quad-core 6600 processor
4GB ram
geforce 9800GT
1TB sata hard drive

A:BSOD on boot installing vista on new pc

When I read your issue I thought to myself, "That sounds like a memory issue." Here is the code and definition:


One of three types of problems occurred in kernel-mode: (1) Hardware failures. (2) Software problems. (3) A bound trap (i.e., a condition that the kernel is not allowed to have or intercept). Hardware failures are the most common cause and, of these, memory hardware failures are the most common.

Try this: Take out one stick of RAM at a time and try to load it. Any BSODs?

Do this: The good thing about this test is it engages almost immediately as you boot-up.

It could be your harddrive as well.
Relevancy 14.62%

I get this BSOD

BCCode : 1000007e BCP1 : C000001D BCP2 : B941DF72 BCP3 : B404EBE0
BCP4 : B404E8DC OSVer : 5_1_2600 SP : 3_0 Product : 256_1

I downloaded new drivers, disable specs on the CPU (e8500) as recommended, but 3d game crash out regularly after about 30 mins or so.

Asus p5n-d is a bit of a dodgy MOBO but I tried everything that has been recommended including bios flashes, memory check, cpu heat checks and rectifying the correct nforce 750i drivers...latest windows updates...etc...

What is the crash? hardware or software? I have a Proline 500w psu and also run a single xfx geforce 9800gt, Intel core 2 duo e8500 wolfdale, Kingston ddr2 667 mem, 200 gig sata seagate hardrive and a cathode ray 17" monitor.

any clues ideas, other than a sledge hammer. Your help will be appreciated.

A:BSOD BCCode : 1000007e random crashes from what?


A system thread generated an exception which the error handler did not catch. There are numerous individual causes for this problem, including hardware incompatibility, a faulty device driver or system service, or some software issues. Check Event Viewer (EventVwr.msc) for additional information.

As you can tell the causes of this error are very diverse which makes it a difficult one, sometimes, to pin down. For clarification, are your BSODs only while doing 3d gaming? What about video card heat checks?
Relevancy 15.05%

I was on my desktop gaming as usual when a lovely BSOD flashed on my screen just quickly enough for me to not be able to read anything it said and then my computer restarted. After it restarted none of my hard drives show up in my bios and i cant get past the loadup screen seeing as how there is no windows showing up. I have 3 internal drives and 1 external that no longer show up in my Bios. I don't think that all 4 could have simultaneously failed and on top of that they are all relatively new. PLEASE someone help me, I have a project to finish before tomorrow

A:No hard drives after BSOD - help

Reset the motherboard's bios...