Windows Support Forum

nero burning but not burning ????

Q: nero burning but not burning ????

Hi to all,
Here's a strange one, I've just re-formatted my hard drive and re-installed xp ( not the first time, I prefer this to restore ) anyway I've tried to burn three music disc's using new blank cd-r's. I go through all the motions ( using nero 5.5 ) I do my compilation as normal, hit burn and nero " burns " the disc. When I try and play the disk on my walkman I can skip through the track numbers but get no sound. When I check it out on my pc in my computer it says Free space 0 bytes, Total size 0 bytes. I am sure this is not a hardware problem so what else could it be ?

I've been recording sucessfully with the same set up and software in the past, any suggestions welcome and appreciated.

TIA

Relevancy 100%
Preferred Solution: nero burning but not burning ????

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 103.63%

Nero Burning ROM crashed during burning and now my DVD drive is unusable. I cannot open the drive, I cannot shut down the computer because it says "Waiting for DVD Drive D:" and the drive runs like it is still burning despite the program doing the burning is no longer open. It isn't even in any process. What can I do to make the drive stop?

A:Nero Burning ROM crashing caused perpetual burning from DVD Drive

Go to Task Manager...shut the system down from there.
 
Turn system off....hard shutdown if necessary...disconnect the optical drive.
 
Sounds to me like it's a hardware problem moreso than a software problem if you cannot manually open the drive.
 
Louis

http://www.bleepingcomputer.com/forums/t/601018/nero-burning-rom-crashing-caused-perpetual-burning-from-dvd-drive/
Relevancy 102.77%

some nero burning user veteran??problem burning cdr ,dvdrs.i cant burn a cdr.with windows media player is posible.also i use clone dvd with sucess. with nero is posible to erase a cdr-w.the problem is i cant record a cdr.when it comes to 3% to 8% the program tell "the burn failed"some advice?thanks for the attention
 

A:some nero burning user veteran??problem burning...

I am a "Nero Veteran", war veteran, etc.. etc.. The reason your having problems is simple. Some discs cannot be copied, as they may be copy protected or contain errors. If you are unsure if your disc can be copied,
run a trial in the "simulation" mode. Click on "More" at the bottom of the page and select "Simulation".
 

https://forums.techguy.org/threads/some-nero-burning-user-veteran-problem-burning.234868/
Relevancy 97.18%

Ok, i'm new to this CD Burning. I have Nero Express, and i'm having a little problem with it.

I've copied an Audio CD to a CD-R, and it plays fine, but there are still space on it, and i wanted to put a MP3 (it converts to CDA really nice also) together with the already burned tracks, but i can't. Everytime i put the same CD, i get the folloqing message:

"This midia cannot be recorded
Please Insert another midia."

(Sorry if it's not right, cuz i translated from portuguese)

Can i do what i want?? How??

Sorry if it is hard to understand, it is hard to explain.

Thank you
 

A:Audio CD Burning with Nero Burning Rom

You cannot append any audio files to an disc that has been completed. Once a disc is completed it cannot access the remaining space. Especially with Nero Express. Once a disc is burned it is "closed (finalized)."

This is just a simple explanation.

I believe Roxio's Easy cd creator lets you add files to your disc as long as you don't "finalize" it. Until you finalize it you will not be able to listen to the music.
 

https://forums.techguy.org/threads/audio-cd-burning-with-nero-burning-rom.155018/
Relevancy 89.01%

I am using a laptop that is a HP Pavilion dv4 Notebook PC.
The OS being used is the 64-bit Windows 7 Home Premium.
 
I am trying to burn a DVD video file (.vob file) to a DVD disc using Nero Vision Essentials (Nero 9).
 
After importing the file into the project, I played the video and found that it has no sound.
 
As a result, when I have successfully burned it to a DVD disc and played this disc on my DVD player, it has also no sound.
 
Please help me fix this problem!

http://www.bleepingcomputer.com/forums/t/524467/no-sound-in-dvd-video-when-burning-it-using-nero-vision-essentials-nero-9/
Relevancy 88.15%

When i click on Nero Burning ROM, it does not open at all. All that happens is i get a windows error report telling me that nero.exe encountered a problem. I have succesfully used this many times before, but one day it just stopped working.

Any idea of what is wrong?
 

A:Nero 7 Ultra Edition - Cannot start Nero Burning ROM

A simple uninstall and install might help.
 

https://forums.techguy.org/threads/nero-7-ultra-edition-cannot-start-nero-burning-rom.418718/
Relevancy 83.42%

Whenever I try to burn CD/DVD using Nerosmart, my cd burner rejects the cd showing this message "Insert recordable Disk" I have changed new cds but all the same. When am just playing Video in the same cd- rom, everything works fine but cannot recognize empty cds.
 

Relevancy 83.42%

sup,
i have got blade 2 on my computer. Blade two is seperated into 2 halves of the movie. When im using nero i put the first halve of the movie onto the compileation and it only says that i have used 100 mb when it should be a lot more. So i burn it to disk and the movie i put to disk is supposed to go for 55 minutes but becuase t only said that i used 100 mb of the disk it only plays 15 minuts of the movie. How do i make a proper vcd using nero burning rom version 5.5.9.14?
 

Relevancy 83.42%

Hi there,
I am able to burn my music cd's on my newly installed NERO but I could not burn ISO's. Everytime it stops at different stages with different errors like:
Buffer Overrun
Illegal Medium
I am using the LG Burner that came with my HP Computer.
I have 382 MB of total Ram on my PC and 3 gigs of hard disk free during the process
Thanks
 

A:NERO not burning ISO's

Just one question - are you closing down all other applications running in the background. Other programs writing to the drive during the disc read / write process are a common cause of this type of error.
 

https://forums.techguy.org/threads/nero-not-burning-isos.157025/
Relevancy 83.42%

I dumped Easy Cd Creator because of conflicts with XP. I am using Nero 5.5, however it doesn't recognize my cd burner. Ive been told it's a stable cd burning program. Is there a wasy I can configure my burner to Nero? Any suggestions are appreciated, thanks, Neesh
 

A:Nero Burning Rom 5.5

Do you have the latest Nero update? http://www.nero.com/en/download.htm

Checked that your recorder is supported? http://www.nero.com/en/recorder.htm

Have you tried the recording program resident in XP?
 

https://forums.techguy.org/threads/nero-burning-rom-5-5.69694/
Relevancy 83.42%

just bought the Dazzle Digital Video Creator ll and converted a vhs tape with it when I tried to put it on a video cd not a dvd but a video cd using nero software when I click on nero then video cd I get a window that has a file browser then more places to drag files below it When I do a music cd I get only one place to drag files My question is which space do you drag the video files to the middle one or the small rom nero burning one on the bottom I tried dragging them to the middle one but the write button never lights up and when I drag them to the small space on the bottom the write button lights up but after the disk is written the file is not on it or I cant find it can some one help me get a file written using nero to a video cd Tom t nbsp

A:nero burning rom

it's been awhile, but putting video files in the bottom window will light up the "write cd" so you can burn.
 

https://forums.techguy.org/threads/nero-burning-rom.133646/
Relevancy 83.42%

Posted before and many advise AGAINST Nero. Decided to see for myself. Been authorizing & burning avi video files to DVD+R's w/only NeroVision Express 3. Results mixed. Couple are DVD clarity copies while majority are "VHS'y" and lightly pixilated. Should be better based on quality of the source. Also, some appear Widescreen while others Full-frame.

1) Under "Default Video Options" at start, would SVCD be better than VCD?
2) Would "Aspect ratio" be better if instead of Automatic I used 4:3 or 16:9?
3) Movie doesn't fit with either "High Quality" or "Standard". Should "Long Play" be an option if I want the pic to look good?
 

https://forums.techguy.org/threads/nero-dvd-r-burning.319830/
Relevancy 83.42%

i just got nero 7. when i download video from my video cam it all works fine. if i burn it to a reg cd and view it on the computer all is good, but when i try to burn it to a dvd that can play on any dvd player the video looks fine but the audio is a little off and about every 5 to 10 sec. there is a little flicker. i have tried to goto the nero support, but they suck, sorry to say but i payed for it now and really would like to burn my home video so i can play it on a dvd player.
 

A:nero 7 dvd burning help

well i don't know much about burning a dvd but i do know stuff about a regular cd. have you tried using a lower burning speed? because when i burn my cds i use an x1 burning speed.
 

http://www.techspot.com/community/topics/nero-7-dvd-burning-help.52382/
Relevancy 83.42%

every once in awhile, actually, almost always lately, when i burn CDs, and use Nero 5.5.9 (latest version), itll burn it...but sometimes when i play it, itll play a song, and suddenly, the song will repeat on its own ...

is this a hardware issue or a software issue?
 

A:nero burning CDs

I would think it would be a hardware issue with the player unless it does that on multiple players.

Try a different brand of CDR. Don’t use RW for audio.
 

https://forums.techguy.org/threads/nero-burning-cds.89530/
Relevancy 83.42%

Hello-
Have had Nero burning rom 5 on my computer since September 02. Didn't have any problems until recently...
Every time I try to compile a new cd, the computer crashes and completely shuts down after it has been writing for a few seconds. I have deleted and reinstalled the program, but nothing seems to help. Is it my physical cd burner?? Any thoughts?
 

A:Nero burning rom - please help!

I have Nero 5 on my computer and have no problems with it. You might try downloading the latest drivers from the web site and see if that helps. You can get them from:

http://www.nero.com/en/#root

Alternatively, you might look in your Device Manager and see if there are any yellow marks beside your CD-R drive.
 

https://forums.techguy.org/threads/nero-burning-rom-please-help.134143/
Relevancy 83.42%

I am trying to burn a CD on Help! Nero Burning Nero and it keeps giving me an error that says quot writer error quot this did not happen before so i m a little confused Can anyone help me please thanks This is my error log ahennawi company A - - - - - Windows XP IA WinAspi - ahead WinASPI File C Program Files Ahead nero Wnaspi dll Ver size bytes created PM Nero version Nero Express Recorder lt AOPEN DUW ARR gt Version A b - HA TA - Adapter driver Nero Burning Help! lt atapi gt HA Drive buffer kB Bus Type default - gt ATAPI detected ATAPI CD-ROM lt AOPEN DUW ARR gt Version A b - HA TA - Adapter driver lt atapi gt HA Scsi-Device-Map DiskPeripheral WDC WD EB- DJF atapi Port ID DMA On CdRomPeripheral AOPEN DUW ARR atapi Port ID DMA Off CdRomPeripheral JLMS XJ-HD S atapi Port ID DMA On CDRom-Device-Map AOPEN DUW ARR E CDRom JLMS XJ-HD S F CDRom AutoRun Excluded drive IDs WriteBufferSize Byte ShowDrvBufStat BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Static Write Speed Table Use Inquiry Global Bus Type default nbsp

A:Nero Burning Help!

Welcome to TechSpot



oiler_girl said:



CdRomPeripheral : AOPEN DUW1608/ARR atapi Port 1 ID 0 DMA: OffClick to expand...

You need to turn DMA on on that drive.

To do that, right-click My Computer on the desktop, select Properties, Hardware tab, Device Manager. Doubleclick on "Secondary IDE Channel" on "IDE ATA/ATAPI controllers", then Advanced Settings tab. Set the "Transfer Mode" to "DMA if available".

See the attached image for more help.
 

http://www.techspot.com/community/topics/nero-burning-help.32574/
Relevancy 83.42%

Hi,
I have nero burning rom version 5.5.8.2 bundled in my system.The problem is when i want to burn my file(in RealAudio/RealvideoVBR format),I received an error msg:"internal error in CVCDDOC:IsProperMediaItem:...."I wonder what has happened and am I able to burn such a file onto my CD-RW.If not,is there other way to burn such a file?Pls Help!Thks A lot!
 

A:Nero Burning Rom???

Bit out of my area but have you tried seeing if any updates for your Nero are available

Also try looking at this thread:

http://64.233.183.104/search?q=cach...Audio/Realvideo+VBR+format&hl=en&ct=clnk&cd=1
 

https://forums.techguy.org/threads/nero-burning-rom.514544/
Relevancy 83.42%

Hi one day i installed nero on my com hearing nero? with Mpg's burning not it was the easiest and best to use for burning home movies vcd s mg files whatever u wanna call em anyway i installed it and burnt a mpg file it worked fine ok so a couple of days later i tried it again but something realy strange happened once it was burning it would say decoding video and take ages and when it finnaly got to it just freezes strange ay Its the newest version of nero i have tried uninstallign it formating and starting afresh but nuthing seems to fix it i am also running xp my burner is an acer x x cdrw Mpg's not burning with nero? little old i Mpg's not burning with nero? know but it has worked fine could it be that nero is new for my burner any help will be appreciated ty gt gt gt gt wire lt lt lt lt P s i also folowed moulders guide to burning vcd s above but used nero for the burning and the same thing happened strange nbsp

A:Mpg's not burning with nero?

If there is just one MPG you are trying to burn I would guess it has a problem. Same if the MPGs you can’t burn are all from the same source.

If you are having problems re-burning the MPG you already were able to burn you likely have a computer problem, although I have no idea what it could be. Maybe you lost a codec.

You say you have the latest version of Nero. Do you have the latest update to that version? There shouldn’t be a compatibility problem – that you were able to burn a VCD with it is a good indication of compatibility.
 

https://forums.techguy.org/threads/mpgs-not-burning-with-nero.245233/
Relevancy 83.42%

When I am trying to back up my dvd Nero stops burning and I get the following message how can I fix it please Windows XP IA WinAspi File Wnaspi dll Ver size bytes created ahead WinASPI File C Program Files ahead Nero Wnaspi dll Ver size bytes created Nero API version Using interface version Installed in C Program Files ahead Nero Application Nero not burning ahead Nero - Burning Rom Recorder lt OPTORITE DVD RW DD gt Version - HA TA - Adapter driver lt atapi gt HA Drive buffer kB Bus Type default - gt ATAPI detected ATAPI Scsi-Device-Map DiskPeripheral ST A atapi Port ID DMA On CdRomPeripheral OPTORITE DVD RW DD atapi Port ID DMA Off DiskPeripheral ST A atapi Port ID DMA On Nero not burning AutoRun Excluded drive IDs CmdQueuing CmdNotification WriteBufferSize Byte ShowDrvBufStat EraseSpeed BUFE Physical memory MB kB Free physical memory MB kB Nero not burning Memory in use Uncached PFiles x Use Static Write Speed Table Use Inquiry Global Bus Type default Check supported media Enabled NeroAPI Phase File APIProgress cpp Line DVD-Video files sorted Text File Reader cpp Line Reader running Text File Writer cpp Line Writer OPTORITE DVD RW DD running ISO GEN - File geniso cpp Line First writeable address x ISO GEN - File geniso cpp Line First writeable address x Text File Nero not burning Burncd cpp Line Turn on Disc-At-Once using DVD media Text File ThreadedTransferInterface cpp Line Setup items original item values TRM DATA MODE CTransferItem indices index not provided original CD pos relocatable CD pos for caching writing not required required no patch infos -------------------------------------------------------------- Text File DlgWaitCD cpp Line Last possible write address on media Last address to be written Text File DlgWaitCD cpp Line Write in overburning mode FALSE Text File DlgWaitCD cpp Line Recorder OPTORITE DVD RW DD Media type DVD-R Disc Manufacturer PRINCO - Disc Application Code Disc Physical Code Text File ThreadedTransferInterface cpp Line Prepare recorder OPTORITE DVD RW DD for write in cue-sheet-DAO DAO infos MCN TOCTYPE x Session Closed CD fixated Tracks to TRM DATA MODE x ISRC quot quot FilePos - Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE CTransferItem indices index not provided original CD pos relocatable CD pos for caching writing not required required no patch infos - gt TRM DATA MODE config wanted index blocks length blocks OPTORITE DVD RW DD -------------------------------------------------------------- Phase File APIProgress cpp Line Caching of files started Phase File APIProgress cpp Line Caching of files completed Phase File APIProgress cpp Line Burn process started at x KB s Text File ThreadedTransferInterface cpp Line Verifying CD position of item relocatable CD pos no patch infos orig at write at Text File DVDR cpp Line Recording mode Sequential Recording Mode Text File Mmc cpp Line Set BUFE BURN-Proof - gt ON Text File DVDR cpp Line Start write address at LBA DVD high compatibility mode Yes Text File Cdrdrv cpp Line ---- DVD Structure Physical Format Information h ---- Layer Address h AGID Length Book Type DVD-R Part Version Disc Size mm Maximum Rate lt not specified gt F h Number of Layers Track Path Parallel Track Path PTP Layer Type recordable Linear Density um bit Track Density um track Starting Physical Sector Number of Data Area h DVD-ROM DVD-R -RW DVD R RW End Physical Sector Number of Data Area F h End Sector Number in Layer h Data in Burst Cutting Area BCA does not exist Media Specific - FE FF A - - SCSI - File Cdrdrv cpp Line SCSI Exec HA TA LUN buffer x Status x x SCSI ERR HA-Status x x OK TA-Status x x SCSI TASTATUS CHKCOND Sense Key x KEY HARDWARE ERROR Sense Code x Sense Qual x CDB Data x A x x x x B x x x x x x x Sense Data x x x x x x x x A x x x x x x DVDR - File Writer cpp Line Focus or tracking error Text File ThreadedTransfer cpp Line all writers idle stopping conversion Text File ThreadedTransfer cpp Line conversion idle stop... Read more

https://forums.techguy.org/threads/nero-not-burning.218307/
Relevancy 83.42%

Hey. Iwas reading the hardware forum, and came across a thread that mentioned nero taking up space on a HD. LOTS of space he said,and I've been burning a bunch of stuff latley and my HD really been filling up. Way dispraportionate(whew) to the rough estimate of stuff supposed to be stored on the HD. So this made me wonder, is there a file that nero stores copies of files already burned??? There was also mention of the files being hard to find?? Anybody heard of this. Thanks in Advance, Graiskye.
 

Relevancy 83.42%

Searched before posting so PLEASE forgive if it's elsewhere already.

Use NERO to convert AVI to MPEG and then burn video DVD's. HOWEVER, can't put file over 700mb onto one disc but know there ARE ways to do it. Is NERO one of them?
 

A:NERO dvd burning

You need to put your AVI's into NeroVision Express to convert and burn. You can also create chapter stops and menus etc.

http://www.nero.com/us/631956523192996.html
 

https://forums.techguy.org/threads/nero-dvd-burning.254202/
Relevancy 83.42%

Hi,
Thanks for help. I have Windows XP and Nero Cd Burning software is already loaded. I have no idea how to proceed to either copy from an existing CD or download music from the internet.
If anyone can provide instructions it would be appreciated, including what sites to go to get music(1952 to 1979 only).
Thanks.
Nick Gill
Naeem2
 

Relevancy 83.42%

Anyone know how to convert Midi's to MP3 using Nero burning Rom? I can change standard cd's to mp3, but the files types selection to change to mp3 doesn't show the option of Midi. Thanks.
 

A:Nero Burning Rom

Not sure which version of Nero you have - I have Nero 6 which has the option Make an MP3 CD in Nero Startsmart.

Failing the above - see this link :

http://mp3.about.com/cs/tipstricks/a/miditomp3orcd.htm

Then if you need more software try here :

http://www.audiotools.co.uk
 

https://forums.techguy.org/threads/nero-burning-rom.297395/
Relevancy 83.42%

I need help burning a DVD .img file. The thing that confuses me are the presettings to choose from.

Do I select Data Mode 1 or 2?
Do I enable "Raw data"? (If yes, the block size defaults to 2352)
What should the Block size be? 2048 or 2352

I have tried Data mode 1, no raw data, block size 2048 but all I got was a coaster. I could see the correct file structure on the dvd but it wouldn't play at all.

(Nero 6.6)

Thank you in advance
 

A:Help with burning dvd in Nero plz!!

Hmmmmmmmm nevermind. I'm now certain it should be Data mode 1, no raw data, and 2048, which I guess meant my image file must've been bad.
 

https://forums.techguy.org/threads/help-with-burning-dvd-in-nero-plz.776505/
Relevancy 83.42%

Hi

I'm using Nero 5.5.2.4, and when I tried to burn a .avi format movie into VCD, The encoding video part took about 3hrs to complete, anyone knows why and how to solve it?

Thanks
 

A:Nero Burning Rom

It's gonna take a while, especially on an 833, to encode from what is probably a divx file to vcd. When I do it sometimes it can take an hour or two as well.

Have you done much video encoding in the past? It's not a fast process by any means. I built my last machine with 2 purposes; to encode SVCDs and to play games. I keep the machine very clean - no crap - no antivirus - nothing. Not even an Office application. It still takes me 5 to 6 hours to encode a full movie to SVCD. I don't think anything is broken - it's just what you're gonna get till machines get faster.

LNCPapa
 

http://www.techspot.com/community/topics/nero-burning-rom.2528/
Relevancy 83.42%

I have Nero 7 installed on my computer and when I am trying to burn a dvd it gets about halfway done and then an error comes up on the screen. Any thoughts?
 

Relevancy 83.42%

Hi Anyone I m using Nero Burning Program and it s no where new as funtional as there version that I used on a trial bases So I m having a problem with it when trying to burn Data on DVDs I don t seem to be able to retrieve it the Data from the DVDs I do seem to be able to retrieve Data from CDs OK through Window s programing but I can t seem to find any way to retrieve Data from the DVD burns with Nero I d like to be able Burning? Nero to burn on DVDs for large volume burns So does anyone have an idea of what I may be doing wrong and how I might correct it I m using DVD-R GB - x Is that OK I have heard something about special Data DVDs I ve also heard that what I use is Nero Burning? OK too So what am I missing in order to retrieve Data from these DVDs Anyone Sincerely John

A:Nero Burning?

What, if any, error messages does nero give you when trying to burn to DVD?
Or do they burn ok but you just can't read them afterwards?

http://www.bleepingcomputer.com/forums/t/21781/nero-burning/
Relevancy 83.42%

I did my first burn with Nero and the Track shows up when clicking the box titled "display medium information".

However, when clicking on box titled "existing compilation" I can get the files to show up on hard drive, but not the burned CD. Instead I get an error message that says:

"G:\ is not accessible Incorrect function"

Both my CD Reader and my burner both appear to be to be working. The Reader is a make by the name of Hi-Val and the Burner is an Imation 32x (really a Teac generic). I am running 512 mb of ram on a PIII machine and Windows 2000 Professional

What am i doing wrong?

Is there a live chat for Nero somewhere?
Obviously the session wouldn't have shown up if it
didn't burn correctly.

Lkng4you
<[email protected]>
 

Relevancy 83.42%

I have nero 5.5.9.9 installed on my xp(without sp1) system and it keeps on not responding you try to close nero. It does not close you have try and restart the system. I was going to install sp1a for xp but it's corrupt and i will have to download it again but i only have a 56k modem. I was wondering is it doing this because nero need sp1 to work or updating nero might help?

Thankyou
 

Relevancy 83.42%

I use Nero v66016 and tried to use the copy DVD feature and got this error message: This path is invalid. Please correct the path or click on cancel.

I have used this feature many times before and never got this error message. Does anyone know how to correct it? I have tried other DVD's but no luck. I have no problems with my system according to AVG, SpyBot and Ad-Aware. I'd appreciate any help. Thanks.

http://www.techsupportforum.com/forums/f10/nero-burning-rom-help-please-235802.html
Relevancy 83.42%

Anyone use Nero Burning Rom?
Anyone had a problem dooin Audio tracks??
well heres a problem i cannot get round

when i put my mp3's in the box for them to burn to .cda i put my newly burned cd in a CD player , computer or car sterio and the first track is missing aprox 20 seconds of the song, then coming to the end of the track it contains the first 20 seconds of the second track and so on so basically each track contains the first 20 seconds of the next track to be played at the end of it ..
hes what i have tried..
uninstall reinstall no luck
uninstall and removall of all known ahead and Nero entries from the registry and reinstall
40 blank CD's

Anyone with a solution please help...thanks
Antony
 

Relevancy 83.42%

I have no clue how to burn a dvd? I have .avi files and other various files that I want to Burn to a cd with nero. Is there a freeware program that will convert them to the right format for burning as a playable dvd(in the dvd player) I have looked everywhere. I have no clue how to to make my dvd?

A:Burning A Dvd With Nero

Hi

I recommend that you download winavi video converter, it may not be freeware but they give you a free trial and i dont think there are any freeware avi to dvd converters.

http://www.techsupportforum.com/forums/f10/burning-a-dvd-with-nero-215982.html
Relevancy 83.42%

I currently have Nero 6 and do not know how to burn DVDs. Please help me.

Relevancy 83.42%

I cannot be able to copy a DVD in my Noro Burning cause the DVD is copy protected ie Decoded.How can I be able to decode it so as to copy it.Thanks
 

A:Nero burning

You can rip it using MovieJack. This is a trial version good for 15 days. I found it pretty easy to use.
 

https://forums.techguy.org/threads/nero-burning.134912/
Relevancy 83.42%

I hope I am in the right forum.
My question is with burning a vcd. I will start by saying that when you are burning an mp3 file the file loads instantly. However, when you drag an mpeg1 file to the burning pane of nero 6 nero has to scan the file as it loads. This is irritating as these files have been burned hundreds of times and they are the correct format. Yet nero has to scan them each time. Sometimes the scan can take longer than the actual burning of the vcd.
My question, is there a way to by pass this scan so that the mpeg1 file loads instantly like the mp3 file?
I have 512 of ram with win xp home sp2 and a 160 gig hd
I hope this isn't to dumb a question
Thanks
Mike
 

A:Burning a VCD using nero 6

Just tell nero smartstart to burn a data disk instead of a VCD.. Then drag the file over..

Your DVD player may, or may not, be able to play the file this way since it's not in "standard" VCD format. All my DVD players work fine using this method though.
 

https://forums.techguy.org/threads/burning-a-vcd-using-nero-6.411902/
Relevancy 83.42%

I've just burned my first CD-RW with Nero 6.6.0.12 Demo. I just wanted to save some backup data. I have burned CD-R's before with Nero and they turned out fine. I just followed the same procedure for the RW cd's as I did for the R cd's. As usual, I did some further 'research' afterward about CD-RW burning and it seems to me that burning RW cd's is more complicated than I thought. Now I'm wondering if I just wasted a disc and effort, by simply doing what I did? Is my newly burned CD-RW useless? What should I do when burning RW's in the future? Thanks.
 

Relevancy 83.42%

I m running a home-built PC with an AMD Athlon XP CPU Ghz Gb RAM Gb HD space Win XP Home SP A few weeks ago in the process of installing a DVD drive I loaded the comp copy of Nero to try it out I decided that I didn t want it and went through me burning Nero up.... is the standard uninstall process in Control Panel I continued to get apparent attempts by Windows Install to install Nero - Burn Nero is burning me up.... except it also said it couldn t find the files so it kept throwing error messages on the screen until I finally had to use Task Manager to kill the applications After a few of these events I did a search of my entire PC for anything that contained the character string quot nero quot or quot ahead quot the Nero company and I deleted everything I could find The Nero installation attempts continued I did a quot regedit quot searched for quot nero quot and quot ahead quot and deleted all references to Nero and Ahead from the register I continued to get the Nero installation attempts I bought PC Rescue and Error Nuker and ran them both It found what appeared to be the error s that were causing the problem and it quot fixed quot them I thought I had finally beat it I rebooted as requested and sure enough Nero tried to install again According to the error messages and Task Manager the offending applications include nero exe migrate dll webscan exe and numerous msiexe exe s Any suggestions or better yet - a real fix would be greatly appreciated HELP Please nbsp

A:Nero is burning me up....

Go here and download Hijack This:
http://www.majorgeeks.com/download3155.html

Install to Program Files, close browser windows, Scan + Log, copy/paste log into here.

There's still probably an entry in the registry or something trying to initiate the uninstall. The HJT log should show us everything trying to run at startup and allow us to fix it.
 

https://forums.techguy.org/threads/nero-is-burning-me-up.384842/
Relevancy 83.42%

having diffculty installing nero5 burning rom keep getting this error message
INTERNAL ERROR 2254, CLASS what is this?
i am using windows me o/s with an nec 40*speed writer nr-9100
the problem occurs when nero installer checks for system settings.
i have run nero5 before but once it failed to respond so i uninstalled nero5 problem started when i tried to reinstall the software i have been trying to install a new graphics card nvidia gforce4 but my syatem wouldnt accept the card had problems with nero5 since this.
i have an athlon amd k6-2 processor
ANY IDEAS AS TO WHAT THE PROBLEM MAYBE ?
 

A:nero burning rom

First one , WELCOME TO TECHSPOT

For your problem, please describe exactly when it happens, which OS do you run, which CD burner do you have, which Nero version and at which stage do you get the error please.
 

http://www.techspot.com/community/topics/nero-burning-rom.4919/
Relevancy 83.42%

I'm trying to burn a music cd with Nero Burning Rom. I am able to get all the way to the burning part, but when it starts it comes up with an error message of "Could no perform start of disk-at-once". I've just started having this problem when I installed version 5.5.10.42.
 

A:Nero Burning Rom

Only piece of advice i can give is to go back and install the previous program. I had the same problem last week when i updated. What I did was deleted the program and downloaded it again.
 

https://forums.techguy.org/threads/nero-burning-rom.145749/
Relevancy 83.42%

hey guys, i have one of the newer nero's, and i have a problem with burning videos.

i have several say 400mb-1.5gb videos, mostly around 700mb. and im trying to make a DVD out of my .AVI's. the problem im having is that when i had 5 of the AVI's with the make a movie option, it says that it needs 30gb's of space to write on the dvd! i selected all the files via win explorer and the total size of all files is only 3.7. how/why does nero turn 3.7gbs into 30?! am i doing it wrong? is this just the way it transfers to the dvd? someone please help this is really starting to tick me off.

should i use another program maybe?
 

A:help with nero burning dvd's

One DVD format movie contain 2.4 GB of space for burning on DVD Disk. You can make only one DVD Disk to convert of your .AVI around 700MB file.
 

https://forums.techguy.org/threads/help-with-nero-burning-dvds.809291/
Relevancy 83.42%

I have a problem with my LITE-ON LXR 40243 External CD burner, which uses Nero Burning software running on Windows 98SE. Nero Burning records the image and then says burning has successfully completed. But it hasn&#8217;t, the burner never starts up. When the device is plugged in the InCD and USB icon comes up okay. I know the system will work as I have had professional tech guys install it and get it running okay. The problem I have is when I reinstall soft ware I can&#8217;t get it going. When I quiz the pros about it, they say all I need to do is install the Windows 98 USB driver form the Nero Burning CD. I done this and it doesn&#8217;t work for me. Any ideas???
 

Relevancy 83.42%

Nero update available here :

http://www.nero.com/en/

Can also be used as a Demo by those who have yet to purchase it.
 

Relevancy 83.42%

Hi, Gang! Looking for help (again) with technical jargon and knowhow! I have never had much success with Nero and another problem has arisen: I am trying to burn (or just make a data disc) from a .AVI file that I have prepared and every time I try to drag the file across I get a message saying that the file is greater than 2G and I must try another compilation (UDF). There is no clue or instruction what all this means or what I am supposed to do. Can anyone walk me through this?
Thanks,
Selwyn.
 

Relevancy 83.42%

I have a movie on my computer which I downloaded Legaly off a website which I pay for. And it's legal so no worries. I pay and all. OK, so I want to put this movie on a CD-R so I can watch this movie on my computer. No when I drag the movie Icon into nero, it goes from 4gb to 1gb. The video works, but there is no audio. What is the problem? How can I get the audio working? I would also like to state that the audio doesnt work in WMP. I have another media player called VLC where the audio works. Is it a codec issue? Which codec do I download?

Oh, and I get this popup once I put the movie into nero: http://www.jworks.net/iworld/nero.PNG
 

Relevancy 83.42%

I'm using Nero version 5 with a Sony CD burner. I am able to successfully burn all kinds of CD's including Music, Data, Images, etc. The problem is that I am not able to read the newly burned CD's in the same Sony drive that burned it. I have no problem reading the CD's in other computers and have no problem playing the burned music CD's in my car or stereo. The problem only exists when I try to read the CD on the same computer and drive that burned it. Does anybody have a clue what is going on?

P.S. - I've tried a couple of different brands of CD's and they all result in the same problem.

Rollin
 

Relevancy 83.42%

Every time i try to use Nero Burning Rom for creating an ISO file, the program just freezes up on me.
Any suggestions?
Thank You,
Gary Teresi
 

Relevancy 83.42%

Whats up with this?

100 Meg to burn cd/dvd''s?

And thats just the package. It's probably compressed and takes up even more space and memory and resources.
 

A:Nero Burning Rom 7.0.1.2 [ 100 Mb ]

I thought at first that it was a major update for the recently-released Nero Burning ROM Ultra Edition 7.0, but it's apparently another new Nero program. This one sells for $60.00 while the ultra edition sells for $100.00.

---------------------------------------------------------------
 

https://forums.techguy.org/threads/nero-burning-rom-7-0-1-2-100-mb.412838/
Relevancy 83.42%

Okay, I have Nero Burning Rom on our old computer because there are a few songs I'd like to burn on it. Well, I'v eused Nero before at my friend's house and I figured out how to burn the cd but it won't finilize it. Since the songs are on the computer (I'm not just burning a cd) I just add them etc. Then it'll go through the burn process and it says it burned sucessfully but it doesn't automaticly finilize it and I've tried everything but it's just being stupid and confusing. So please, does anyone know what I could do? Lol. This was my last resort, if I dson't figure it out soon either I'll trow the computer out the window or just get rid of Nero. *Hee...I have a short temper* Well...please help..and thanks, like always!

Luv,
Brat
 

Relevancy 83.42%

I use Nero Burning ROM to back up My Documents on a CD RW disc using the Add to compilation option this has always worked well but now for some reason when I try to open Nero Burning ROM I get the following error message quot 7 Nero Burning ROM Nero exe has encountered a problem and needs to close quot All other items in Nero work fine can anyone help please Logfile of HijackThis v Scan saved at on Platform Windows XP SP WinNT MSIE Internet Explorer v Running processes I WINDOWS System smss exe I WINDOWS system winlogon exe I WINDOWS system services exe I WINDOWS system lsass exe I WINDOWS system svchost exe I WINDOWS System svchost exe I WINDOWS system spoolsv exe I WINDOWS Explorer EXE I PROGRA Grisoft AVGFRE avgamsvr exe I PROGRA Grisoft AVGFRE avgupsvc exe I PROGRA Grisoft AVGFRE avgemc exe I Program Files CA SharedComponents CA LIC LogWatNT exe I WINDOWS system Nero 7 Burning ROM nvsvc exe I WINDOWS System spool DRIVERS W X E FATI CE EXE I WINDOWS system pctspk exe I PROGRA Grisoft AVGFRE avgcc exe I Program Files Java jre bin jusched exe I WINDOWS System svchost exe I WINDOWS system RUNDLL EXE I WINDOWS system ctfmon Nero 7 Burning ROM exe I Program Files HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Start Page http www google co uk R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId O - BHO IE Pro - -E - DF-A - FCD B BF - I Program Files IE Pro IE Pro dll O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - I Program Files Common Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO Skype add-on mastermind - BF B-C D - d - A -A F BA C - I Program Files Skype Toolbars Internet Explorer SkypeIEPlugin dll O - BHO SSVHelper Class - BB-D F - C-B EB-D DAF D D - I Program Files Java jre bin ssv dll O - BHO no name - E D - A- EC-A -BA D E E - no file O - BHO EpsonToolBandKicker Class - E FB- DD- F -B AC-B CAE F A - I Program Files EPSON EPSON Web-To-Page EPSON Web-To-Page dll O - Toolbar EPSON Web-To-Page - EE D F- B- - D-C B AAEBA D - I Program Files EPSON EPSON Web-To-Page EPSON Web-To-Page dll O - HKLM Run EPSON Stylus Photo RX Series I WINDOWS System spool DRIVERS W X E FATI CE EXE P quot EPSON Stylus Photo RX Series quot O quot USB quot M quot Stylus Photo RX quot O - HKLM Run AVG CC I PROGRA Grisoft AVGFRE avgcc exe STARTUP O - HKLM Run SunJavaUpdateSched quot I Program Files Java jre bin jusched exe quot O - HKLM Run PCMService quot I Program Files Medion Home Cinema XL II PowerCinema PCMService exe quot O - HKLM Run NvCplDaemon RUNDLL EXE I WINDOWS system NvCpl dll NvStartup O - HKLM Run nwiz nwiz exe install O - HKLM Run NvMediaCenter RUNDLL EXE I WINDOWS system NvMcTray dll NvTaskbarInit O - HKCU Run ctfmon exe I WINDOWS system ctfmon exe O - Extra context menu item E amp xport to Microsoft Excel - res I PROGRA MICROS Office EXCEL EXE O - Extra button IE Pro Preferences - F-A - f - C - F CBBF C D - I Program Files IE Pro IE Pro dll O - Extra Tools menuitem IE Pro Preferences - F-A - f - C - F CBBF C D - I Program Files IE Pro IE Pro dll O - Extra button no name - B E C - FCB- CF-AAA - C - I Program Files Java jre bin ssv dll O - Extra Tools menuitem Sun Java Console - B E C - FCB- CF-AAA - C - I Program Files Java jre bin ssv dll O - Extra button Skype - BF - - EC - -D B E B - I Program Files Skype Toolbars Internet Explorer SkypeIEPlugin dll O - Extra button Research - B - CC- C -B BE- C C A - I PROGRA MICROS Office REFIEBAR DLL O - Extra button no name - e e dd -d - - b -f ba - windir Network Diagnostic xpnetdiag exe file missing O - Extra Tools menuitem xpsp res dll - - e e dd -d - - b -f ba - windir Network Diagnostic xpnetdiag exe ... Read more

Relevancy 83.42%

I have been having some problems burning CDs lately. Nero will go through the motions and successfully burn the CD, but when I go to listen to the CD the tracks will not play. Is this a problem with the software or my burner itself? Is there any kind of test I can do to check and see if my burner is working correctly? In the past CDs created from this burner have successfully worked, which is why this recent problem has been so frustrating. Thanks for any advice or support
 

A:Nero Burning ROM

You could put the cd in your cd-rom and open my computer. Then right click the cd-rom drive the cd is located in. Click open and check the contents of the cd. They should be called .cda files. Click on one and see if your media player can play the track correctly. Also, you could go to your control panel and click on the system icon. Then go to device manager and click the plus sign next to cd-rom. Right click the cd-writer and click delete. Re-boot your computer to freshly reload the driver for that cd-writer. Also, have you updated your NeroBurning Rom to the newest version? If not, Nero has a update feature built into their installer for there new versions of NeroBurning Rom. Last thing, some of the blank cd's out their are not the greatest quality. I purchased a pack of generic blanks cd's and they would not play my copied music in my cd player. I then purchased a pack of Maxell blank cd's and did the same thing and my music played correctly. It is a trial and error procedure when you encounter weird problems like this. I hope my input was a help to you. If not I apologize for not being able to help you.

Good luck!
 

https://forums.techguy.org/threads/nero-burning-rom.136726/
Relevancy 83.42%

Seems not only do we have probs burning cd's but now we probs reading. plz help
 

A:Nero Burning

First choice is to go to device manager & delete the cd-rw, then restart computer. PC will reinstall the hardware and you can try from there.
Secondly, in regards to Nero, you could try uninstalling software and then reinstalling.

These are based on the assumption that you do have a up-to-date virus scanner on your pc and that it is testing clean.
 

https://forums.techguy.org/threads/nero-burning.141678/
Relevancy 82.56%

Hi i was wondering if anyone could help me with a problem i am having with nero burning rom. i am using the latest version of nero and it works perfect untill i try to back up some files onto a DVD. i have wasted lots of blank DVD's doing this as it locked up at different parts of the burning process, i have left the burn go for a max of an hour incase it was just checking the filename etc but it still did not go any further, please any help with this would be great thanx.
 

Relevancy 82.56%

I ve had one successful attempt at burning a DVD out 7.7.5.1 Burning Nero when using Error of about tries I am trying to make copies of my DVD s and this is the log from Nero Error when Burning using Nero 7.7.5.1 C - - E -MA X- - - Windows XP IA WinAspi - ahead WinASPI File C Program Files Nero Nero Core Wnaspi dll Ver size bytes created PM NT-SPTI used Nero API version Using interface version Installed in C Program Files Nero Nero Core Application ahead Nero - Burning Rom Internal Version Recorder lt PHILIPS DVD -RW SDVD gt Version AD - HA TA - Adapter driver lt IDE gt HA Drive buffer kB Bus Type default - gt ATAPI detected Scsi-Device-Map DiskPeripheral ST AS atapi Port ID DMA On CdRomPeripheral PHILIPS DVD -RW SDVD atapi Port ID DMA On CDRom-Device-Map PHILIPS DVD -RW SDVD E CDRom AutoRun Excluded drive IDs WriteBufferSize Byte BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Inquiry Global Bus Type default Check supported media Disabled NeroAPI AM Phase File APIProgress cpp Line DVD-Video files reallocation started AM Phase File APIProgress cpp Line DVD-Video files reallocation completed no file modified AM Phase File APIProgress cpp Line DVD-Video files sorted AM Text File SCSIPTICommands cpp Line LockMCN - completed sucessfully for IOCTL STORAGE MCN CONTROL AM Text File AudioCompilationImpl cpp Line DRM StartDrmRecording RealRec ImageRec Copies DRM Beginning burn process AM ISO GEN - File Geniso cpp Line First writeable address x AM ISO GEN - File Geniso cpp Line First writeable address x AM Text File Burncd cpp Line Turn on Disc-At-Once using DVD media AM Text File DlgWaitCD cpp Line Last possible write address on media MB Last address to be written MB AM Text File DlgWaitCD cpp Line Write in overburning mode NO AM Text File DlgWaitCD cpp Line Recorder PHILIPS DVD -RW SDVD Media type DVD-R Disc Manufacturer CMC MA - G AM Disc Application Code Disc Physical Code AM Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt Insert empty disc to write to Medium in drive unknown Medium required by compilation DVD R RW DVD R DL AM Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE indices index not provided original disc pos relocatable disc pos for caching writing not required required - gt TRM DATA MODE config wanted index blocks length blocks E PHILIPS DVD -RW SDVD -------------------------------------------------------------- AM Text File ThreadedTransferInterface cpp Line Prepare E PHILIPS DVD -RW SDVD for write in CUE-sheet-DAO DAO infos MCN quot quot TOCType x Session Closed disc fixated Tracks to Idx Idx Next Trk TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx CtrlAdr Size NWA RecDep lead-in x x x x x x lead-out x x AM Text File SCSIPTICommands cpp Line SPTILockVolume - completed successfully for FCTL LOCK VOLUME AM Phase File APIProgress cpp Line Caching of files started AM Text File Burncd cpp Line Cache writing successful AM Phase File APIProgress cpp Line Caching of files completed AM Phase File APIProgress cpp Line Burn process started at x KB s AM Text File ThreadedTransferInterface cpp Line Verifying disc position of item relocatable disc pos no patch infos orig at write at AM Text File DVDR cpp Line Recording mode Sequential Recording Mode AM Text File DVDR cpp Line Start write address at LBA DVD high compatibility mode Yes AM SPTI - File SCSIPassThrough cpp Line CdRom SCSIStatus x WinError NeroError - Sense Key x KEY ILLEGAL REQUEST Sense Code x Sense Qual x CDB Data xAC Sense Area x A Buffer x c Len x AM Text File Cdrdrv cpp Line ---- DVD Structure Physical Format Information h ---- Media Type Layer Address h AGID Length Book Type DVD-R Part Version x Extended Part Version Disc Size mm Maximum Rate lt not specified gt F h Number of Layers Track Path Parallel Track Path PTP Layer Type recordable Linear Density um bit Track Density um track Starting Physical Sector Number of Data Area... Read more

A:Error when Burning using Nero 7.7.5.1

What type of DVD are you trying to burn? A store bought movie or a home-made collection? What is the make, type (-R, +R) and speed of your blank DVD's
 

http://www.techspot.com/community/topics/error-when-burning-using-nero-7-7-5-1.82167/
Relevancy 82.56%

I've Nero burning rom 5.0 software now but I looked at the Sonic RecordNow software older 7.5 since Roxio bought the company from sonic and it's screwed. Where do I buy sonic 7.5 software on-line?
Thanks
 

A:Nero Burning problem

Unless they dont have any copies left you could always contact Sonic and ask if they would sell you one. That worked for me one time. http://www.sonic.com/products/Consumer/

Another place I would check would be e-bay... you never know when someone is going to upgrade and no longer want the older version and try to make a few bucks to offset the new cost. Just a thought.
 

https://forums.techguy.org/threads/nero-burning-problem.452980/
Relevancy 82.56%

Hi guys my burner is some how acting up I can burn cd-r s fine Data Music etc It s dvd-r s that is making it go wonky I m trying to burn everything off my hdd so that i can format my current hdd but Fail Burning Nero I ve been encountering a lot Nero Burning Fail of burn process failures Attacted is my log Note that DMA is turned off I ve read Nero Burning Fail that it could be part of the issue but I ve gone to Device Management and tried to turn it on but the only options I have under IDE ATA ATAPI is NVIDIA nForce Parallel ATA controller internal burner and NVIDIA nForce Serial ATA Controller HDD I ve read around and reports all say that s where you turn on DMA but there s no option for it I ve looked at every possible tabs Tabs I have are General Primary Channel Secondary Channel Driver Detils and Resources Please help me into remeding this problem Thanks Attatched Log Windows XP IA WinAspi - ahead WinASPI File C Program Files Ahead nero Wnaspi dll Ver size bytes created PM Nero version Nero Express Recorder lt SONY DVD RW DRU- A gt Version JY - HA TA - Adapter driver lt nvatabus gt HA Drive buffer kB Bus Type default - gt ATAPI detected CD-ROM lt SONY DVD RW DRU- A gt Version JY - HA TA - Adapter driver lt nvatabus gt HA Scsi-Device-Map CdRomPeripheral SONY DVD RW DRU- A nvatabus Port ID DMA Off DiskPeripheral ST AS nvata Port ID DMA Off DiskPeripheral Maxtor L S nvata Port ID DMA Off CDRom-Device-Map SONY DVD RW DRU- A D CDRom AutoRun Excluded drive IDs WriteBufferSize Byte ShowDrvBufStat BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Inquiry Global Bus Type default Check supported media Disabled ISO compilation PM Text File Isodoc cpp Line Iso document burn settings ------------------------------------------ Determine maximum speed FALSE Simulate FALSE Write TRUE Finalize CD TRUE Multisession FALSE Burning mode DAO Mode ISO Level Max of char Character set ISO Joliet TRUE Allow pathdepth more than directories TRUE Allow more than characters in path TRUE Write ISO file extensions TRUE PM Text File Reader cpp Line Reader running PM Text File Writer cpp Line Writer SONY DVD RW DRU- A running PM ISO GEN - File geniso cpp Line First writeable address x PM Text File Burncd cpp Line Turn on Disc-at-once using DVD media PM Text File DlgWaitCD cpp Line Last possible write address on media MB Last address to be written MB PM Text File DlgWaitCD cpp Line Write in overburning mode NO enabled CD PM Text File DlgWaitCD cpp Line Recorder SONY DVD RW DRU- A Media type DVD R Disc Manufacturer ID SONY Media Type ID D Product revision number Disc Application Code Extended Information Indicators PM Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt PM Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE indices index not provided original disc pos relocatable disc pos for caching writing not required required no patch infos - gt TRM DATA MODE config wanted index blocks length blocks SONY DVD RW DRU- A -------------------------------------------------------------- PM Text File ThreadedTransferInterface cpp Line Prepare recorder SONY DVD RW DRU- A for write in CUE-sheet-DAO DAO infos MCN quot quot TOCType x Session Closed disc fixated Tracks to TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx RecDep CtrlAdr lead-in x x x x x x lead-out x x PM Phase File dlgbrnst cpp Line Caching of files started PM Text File Burncd cpp Line Cache writing successful PM Phase File dlgbrnst cpp Line Caching of files completed PM Phase File dlgbrnst cpp Line Burn process started at x KB s PM Text File ThreadedTransferInterface cpp Line Verifying disc position of item relocatable disc pos no patch infos orig at write at PM Text File Cdrdrv cpp Line ---- DVD Structure Physical Format Information h ---- Layer Address h AGID Length Book Type DVD R Part Version Disc Size mm Maximum Rate lt not specified gt F h Number of Layers Track Pat... Read more

A:Nero Burning Fail

I notice nero is very sensitive it works with some computers and not others. Just try another they are pretty much equal.
 

http://www.techspot.com/community/topics/nero-burning-fail.142943/
Relevancy 82.56%

Whenever I open up Nero burning Rom to burn Nero Burning Issues Rom stuff I get this pop-up titled quot bad or missing system DLL quot and the text in the pop-up reads quot Needs WINDOWS original WNASPI DLL quot now I searched that DLL on my comp and it s in my nero folder but I keep getting this pop up and when I click ok I get another window titled quot NeroApix quot and the text reads quot Could Not open driver Trying system aspi quot I don t know what Nero Burning Rom Issues to do and burning data is important because this computer is old and I plan on getting rid of it I need the burning working though in order to transfer files Please any help on fixing this issue would be appreciated I already reinstalled nero and whatnot I have Nero smartstart I m running on Windows version mhz pentium II MB ram about a gig of space left out of thank you nbsp

A:Nero Burning Rom Issues

Install Forceaspi. http://radified.com/ASPI/forceaspi.htm
 

https://forums.techguy.org/threads/nero-burning-rom-issues.245306/
Relevancy 82.56%

Hi I ve been Burning 12 Nero ROM problem using Nero Burning ROM for years now and never really had a problem with it But the last few months every time I try to burn a CD or DVD a few minutes into the burning process an error happens and the tray opens I ve wasted many disks and it just pisses me off that I have no idea what s causing this I tried to use different versions of Nero and days ago I was able to Nero Burning ROM 12 problem burn an audio CD and a DVD properly using Portable version of Nero Burning ROM 12 problem Nero Burning ROM I tried to do the same today and an error occurred again I saved the log and was wondering if anyone could help me figure out what the problem is Not sure if I m supposed to post this but here it goes E- -XL C- PML- P Z- H - - Windows AMD Wow Process Nero Version Internal Version Recorder lt Optiarc DVD RW AD- H gt Version KX - HA TA - Adapter driver lt Serial ATA gt HA Drive buffer kB Bus Type via Inquiry data CD-ROM lt Optiarc DVD RW AD- H gt Version KX - HA TA - Adapter driver lt Serial ATA gt HA Scsi-Device-Map DiskPeripheral Hitachi HTS B A iaStor Port ID DMA On CdRomPeripheral Optiarc DVD RW AD- H iaStor Port ID DMA Off CDRom-Device-Map Optiarc DVD RW AD- H D CdRom AutoRun Excluded drive IDs WriteBufferSize Byte BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Global Bus Type default Check supported media Disabled ISO compilation Text File SCSIPTICommands cpp Line LockMCN - completed sucessfully for IOCTL STORAGE MCN CONTROL Text File Isodoc cpp Line Iso document burn settings ------------------------------------------ Determine maximum speed FALSE Simulate FALSE Write TRUE Finalize CD FALSE Multisession FALSE Burning mode DAO Mode ISO Level Max of char Character set ISO Joliet TRUE Allow pathdepth more than directories TRUE Allow more than characters in path TRUE Write ISO file extensions TRUE PHASE File dlgbrnst cpp Line Generation of disc structures started ISO GEN - File geniso cpp Line First writeable address x PHASE File dlgbrnst cpp Line Generation of disc structures completed Text File Burncd cpp Line Turn on Disc-At-Once using DVD media Text File DlgWaitCD cpp Line D DVD RW AD- H Last possible write address on media Last address to be written Text File DlgWaitCD cpp Line D DVD RW AD- H Write in overburning mode NO enabled CD Text File DlgWaitCD cpp Line Recorder Optiarc DVD RW AD- H Media type DVD R Disc Manufacturer ID lt CMC MAG gt Media Type ID lt M gt Product revision number Disc Application Code Extended Information Indicators Text File DlgWaitCD cpp Line D DVD RW AD- H gt gt gt Protocol of DlgWaitCD activities lt lt lt Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE indices index not provided original disc pos relocatable disc pos for caching writing not required required - gt TRM DATA MODE config wanted index blocks length blocks D Optiarc DVD RW AD- H -------------------------------------------------------------- Text File ThreadedTransferInterface cpp Line Prepare D Optiarc DVD RW AD- H for write in CUE-sheet-DAO DAO infos MCN quot quot TOCType x Session Closed disc not fixated Tracks to Idx Idx Next Trk TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx CtrlAdr Size NWA RecDep lead-in x x x x x x lead-out x x MediaType DVD R Text File SCSIPTICommands cpp Line SPTILockVolume - completed successfully for FSCTL LOCK VOLUME Text File Burncd cpp Line Caching options cache CDRom or Network-Yes small files-No lt KB PHASE File dlgbrnst cpp Line Caching of files started Text File Burncd cpp Line Cache writing successful PHASE File dlgbrnst cpp Line Caching of files completed PHASE File dlgbrnst cpp Line Burn process started at x KB s Text File ThreadedTransferInterface cpp Line Verifying disc position of item relocatable disc pos no patch infos orig at write at Text File Cdrdrv cpp Line ---- Disc Structure Physical Format Information h ---- Media Type Layer Address h AGID Len... Read more

A:Nero Burning ROM 12 problem

The above error was apparently for a DVD. My first recommendation is always to test using a quality media. For SL DVD, use Verbatim or Taio Yuden. For DL DVD, use Verbatim. After you know your process works with a quality media, then you can experiment with other brands/types to see what works on your hardware.

In this case, you appear to be using CMC media, which is a low quality media.
 

https://forums.techguy.org/threads/nero-burning-rom-12-problem.1077366/
Relevancy 82.56%

hi i have an error burning some of my dvd discs on nero startsmart (nero7)
it goes well until the end where it goes to write lead in then freezes for about 8 minutes then sez that the burn process has failed please could you help me it would be very much obliged ty

ps there was an error code like -1066 or sumin
 

https://forums.techguy.org/threads/i-have-an-error-burning-on-nero.613490/
Relevancy 82.56%

Hi,
My daughter was wanting to burn an audio cd with Nero,
she dragged the files from Kazaa shared folder etc. ,
she clicked on test and burn and the process failed.........
something to the effect of an incorrect filepath?
Nero doesn't tell you what song the error occured at.
* is there a way to check the "filepath" of these mp3's before an error message occurs?
* How is this problem solved?, is there a program to check this?

 

Relevancy 82.56%

I just bought an MP NERO Burning finalizing rom and cd's cdplayer Its a cd player that can play MP s instead of wav files for you that do not know Anyways its a RIOvolt I tried burning a cd of MBs for it and when I clicked quot NERO Burning rom and finalizing cd's Write CD quot a message popped up saying this cd cannot fit onto the disc unless it is finalized I choose to continue because I was told to be able to play mp cd s you need to finalize the disc So the cd gets burned but when I try to play its only half the songs are able to play and only for about seconds I thought maybe my cd was compressed so I tried again and made the cd only MB out of the size I choose the option to finalize the disc and went on to choose my songs Then I went back and made sure that my CD was being finalized and the check box for finalize cd was unchecked This leads me to believe that NERO is not finalizing the cd s HELP How do I get this to work I want to use my mp cdplayer nbsp

Relevancy 82.56%

hi i have a nero 7 premium and when i burn any cd's i always have problem playing it. only last track it don't play all of them play good. also i burn in all Formats If this help .... please tell me what to do ....thanks

asis
 

Relevancy 82.56%

I have been using Nero for a long time now without any problems until lately, now I am getting this error message "unable to create the disc structure". I just do not know what to do here. Can anyone help me out?

A:Nero Burning Problem

Here's a couple of threads that offer several suggestions:nerovison issuesNeroVisionExpress 3 Problem

http://www.bleepingcomputer.com/forums/t/101220/nero-burning-problem/
Relevancy 82.56%

Hi
I have the NERO 5.5.3.2 and am having problems burning cds.

The cd will burn up to 75% of the disk then it stops.

I have Windows 98 and a compaq presario

thanks
 

Relevancy 82.56%

I can burn data software music etc onto Cd using Nero but not movies I have downloaded I get the following message "couldn't perform fixation" which as far as I can gather is something to do with the Cyber Drive. Haven't a clue what either is. Have attached error log if it means anything to anyone ( it's double dutch to me)
 

Relevancy 82.56%

A freind of mine is having problems burning on the fly with nero six.

His pc has 3 rom drives (1xcd writer, 1xDVD Rom, 1xDVD writer). These are all recognised by his pc, but when he comes to make backup copies of dvd's (bear in mind these are not DVD's from a shop) on the fly using the DVD rom and DVD writer.... Nero Comes up with an error message saying "Nero Cannot Copy This DVD"

I was wondering if anyone has any ideas on fixing this problem

He has a 2.6gig Amd XP with 512 DDR memory
 

A:problems burning on the fly with nero 6

Has he tried to make an image file from the DVD, then burn from the image?
 

https://forums.techguy.org/threads/problems-burning-on-the-fly-with-nero-6.258715/
Relevancy 82.56%

It s a new writer I errors burning Nero ve only been able to burn one audio CD and then errors the rest of the time This is the logfile when I tried burning a video CD from mpeg file Windows XP IA WinAspi - ahead WinASPI File C Program Files Ahead Nero Wnaspi dll Ver size Nero burning errors bytes created AM Nero version Nero Express Recorder lt MATSHITA DVD-RAM UJ- S gt Version - HA TA - Adapter driver lt gt HA Drive buffer kB Bus Type via Inquiry data - gt ATAPI detected Connected to MMC as unknown drive with class-nr Drive is autodetected - recorder class Std MMC recorder CD-ROM lt MATSHITA DVD-RAM UJ- S gt Version - HA TA - Adapter driver lt gt HA Scsi-Device-Map DiskPeripheral TOSHIBA MK GAS atapi Port ID DMA On AutoRun Excluded drive IDs CmdQueuing CmdNotification WriteBufferSize Nero burning errors Byte ShowDrvBufStat EraseSpeed BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Static Write Speed Table Use Inquiry Global Bus Type default Check supported media Disabled Video CD AM Text File Isodoc cpp Line Iso document burn settings ------------------------------------------ Determine maximum speed TRUE Simulate TRUE Write TRUE Finalize CD TRUE Multisession FALSE Burning mode DAO Mode XA ISO Level Max of char Character set ISO Joliet FALSE Allow pathdepth more than directories TRUE Allow more than characters in path TRUE Write ISO file extensions TRUE AM Phase File dlgbrnst cpp Line Buffer Underrun Protection activated AM Text File Reader cpp Line Reader running AM Text File Writer cpp Line Writer MATSHITA DVD-RAM UJ- S running AM ISO GEN - File geniso cpp Line First writeable address x AM ISO GEN - File geniso cpp Line First writeable address x AM Text File Burncd cpp Line Turn on Disc-at-once using CD-R RW media AM Text File DlgWaitCD cpp Line Last possible write address on media Last address to be written AM Text File DlgWaitCD cpp Line Write in overburning mode FALSE AM Text File DlgWaitCD cpp Line Recorder MATSHITA DVD-RAM UJ- S CDR code OSJ entry from CMC Magnetics Corporation ATIP Data Special Info hex D A LI F B LO Additional Info hex invalid invalid invalid AM Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE CTransferItem indices index not provided original CD pos relocatable CD pos for caching writing not required required no patch infos - gt TRM DATA RAW MODE config wanted index blocks length blocks MATSHITA DVD-RAM UJ- S TRM DATA MODE the o c hdtv-lol BT indices index not provided original CD pos relocatable CD pos for caching writing not required not required no patch infos - gt TRM DATA RAW MODE config wanted index blocks length blocks MATSHITA DVD-RAM UJ- S -------------------------------------------------------------- AM Text File Burncd cpp Line Recorder and media-info Burning to MATSHITA DVD-RAM UJ- S on a CD-R media AM Text File ThreadedTransferInterface cpp Line Prepare recorder MATSHITA DVD-RAM UJ- S for write in cue-sheet-DAO DAO infos MCN TOCTYPE x Session Closed CD fixated Tracks to TRM DATA RAW MODE x ISRC quot quot FilePos TRM DATA RAW MODE x ISRC quot quot FilePos AM Phase File dlgbrnst cpp Line Caching of files started AM Phase File dlgbrnst cpp Line Caching of files completed AM Phase File dlgbrnst cpp Line Speed measurement started AM Text File ThreadedTransferInterface cpp Line Verifying CD position of item relocatable CD pos no patch infos orig at write at AM Text File ThreadedTransferInterface cpp Line Verifying CD position of item relocatable no CD pos no patch infos orig at write at AM Text File WriterStatus cpp Line lt MATSHITA DVD-RAM UJ- S gt start writing Lead-Out at LBA FB Dh lenght blocks AM Text File ThreadedTransfer cpp Line all writers idle stopping conversion AM Text File dlgbrnst cpp Line Set remaining time ms - gt OK AM Phase File dlgbrnst cpp Line Speed measurement completed x KB s AM Phase File dlgbrnst cpp Line Simulation started at x KB s AM Text File ThreadedTransferInterface cpp Li... Read more

Relevancy 82.56%

I always get this error, This never used to happen and when i check task manager hardly any resources are used. It only burns after a reboot. It worked find last week but now I don't know what happend.
 

Relevancy 82.56%

nero burning problem on Liteon SOHW s I m trying to burn on -r DVD keep wasting dicks by getting the following log any help appreciated Using Liteon SOHW s Nero Recode problem nero burning Version Project type Remake a DVD Target size DVD File burn dvdfiles cpp Line Compile DVD Cancel Burn settings Target LITE-ON DVDRW SOHW- S Number of copies Write speed KB s Temp folder C sg dvd VIDEO TS bytes free Direct burning true Target media DVD R RW DVD-R RW DVD-RAM DVD-R DL DVD R DL Shutdown when finished false Advanced Analysis false Compress Adaptive false File burn dvdfiles cpp Line Compile DVD init VTS Title Vobs vobus MB - gt MB R Video MB extra MB Audio streams Dolby Digital -ch Unspecified MB enabled Subpicture streams File burn dvdfiles cpp Line Compile DVD begin copy File NeroRecorderBase cpp Line Writing to disc D File NeroRecorderBase cpp Line Free capacity on disc sectors File burn dvdfiles cpp Line Compile DVD burning sectors required File burn dvdfiles cpp Line Compile DVD adjust target size to MB MB obtained File burn dvdfiles cpp Line Compiling DVD Volume started File vob record cpp Line DirectBurn offset VTS VOB File nero burning problem NeroRecorder cpp Line Burn failed ----- Begin NeroAPI error log ----- Windows XP IA WinAspi - ahead WinASPI File C Program Files Nero Nero Core Wnaspi nero burning problem dll Ver size bytes created NT-SPTI used Nero API version Using interface version Installed in C nero burning problem Program Files Nero Nero Core Application Ahead Nero Recode Recorder lt LITE-ON DVDRW SOHW- S gt Version BGS - HA TA - Adapter driver lt IDE gt HA Drive buffer kB Bus Type default - gt ATAPI detected Scsi-Device-Map CdRomPeripheral LITE-ON DVDRW SOHW- S atapi Port ID DMA On DiskPeripheral ST A atapi Port ID DMA On CDRom-Device-Map LITE-ON DVDRW SOHW- S E CDRom AutoRun Excluded drive IDs WriteBufferSize Byte ShowDrvBufStat BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Inquiry Global Bus Type default Check supported media Disabled NeroAPI Text File DlgWaitCD cpp Line Last possible write address on media MB Last address to be written - - MB Text File DlgWaitCD cpp Line Write in overburning mode NO Text File DlgWaitCD cpp Line Recorder LITE-ON DVDRW SOHW- S Media type DVD-R Disc Manufacturer OPTODI - SCR Disc Application Code Disc Physical Code Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt Text File SCSIPassThrough cpp Line SPTILockVolume - completed successfully for FCTL LOCK VOLUME Text File DVDR cpp Line Recording mode Sequential Recording Mode for Multisession Text File MMC cpp Line Set BUFE Buffer underrun protection - gt ON SMART-BURN ON Text File DVDR cpp Line Start write address at LBA DVD high compatibility mode No Text File Cdrdrv cpp Line ---- DVD Structure Physical Format Information h ---- Layer Address h AGID Length Book Type DVD-R Part Version x Extended Part Version Disc Size mm Maximum Rate lt not specified gt F h Number of Layers Track Path Parallel Track Path PTP Layer Type recordable Linear Density um bit Track Density um track Starting Physical Sector Number of Data Area h DVD-ROM DVD-R -RW DVD R RW End Physical Sector Number of Data Area h End Sector Number in Layer h LBN FFFD h MB Data in Burst Cutting Area BCA does not exist Start sector number of the current Border-Out h Start sector number of the next Border-In h Media Specific - - - Text File BurnAtOnceRecorder cpp Line Estimated filesystem size Phase File APIProgress cpp Line Burn process started at x KB s Text File BurnAtOnceRecorder cpp Line Reserved fragment at Length Text File BurnAtOnceRecorder cpp Line Reserved start fragment at Text File BurnAtOnceRecorder cpp Line Reserved fragment at Length Text File BurnAtOnceRecorder cpp Line Writing VTS VOB at sector SPTI - File SCSIPassThrough cpp Line CdRom SCSIStatus x WinError NeroError - Sense Key x KEY MEDIUM ERROR Sense Code x C Sense Qual x CDB Data x A D Sense Area x A C Buffer x cb Len x x BA F E... Read more

A:nero burning problem

Looks like you are trying to burn copyrightrd material which is against the law.
 

http://www.techspot.com/community/topics/nero-burning-problem.50286/
Relevancy 82.56%

Hi I used the Windows Media Player to archive my music library I want to be Problems with Burning Nero Rom able to now pull that music and burn to cd using Nero The problem seems to be incompatible formats Nero cannot read the files as they sit on my hard drive They must be converted from windows media file to wav file Can this be done Also I noticed some inconsistentcies with how XP stored and labled albums that were downloaded on different Problems with Nero Burning Rom days All of the albums are placed in a folder labeled unknown artists Once I go online and run Media Player each album is named and Problems with Nero Burning Rom labeled and I get a nice thumbnail depicting the album cover Now though all I get is the thumbnail The folder remains labeled as unknown artists The artist s and album s name do show up at the top of media player just not the folder that sits in my documents and my music The reason that I like to use Nero instead of Media Player is that all the tracks you drag and drop take up space on their progress bar so you know exactly where you stand spacewise So how do I use Nero to burn these folders and why won t XP name my downloaded albums properly anymore nbsp

A:Problems with Nero Burning Rom

You can use Winamp 2.xx's Diskwriter output plugin to convert many things to *.wavs. I suggested this in a thread somewhere and someone said that there can be some problems with doing it this way or something, although before I knew nero could deal with *.mp3s I always did it this way.
As far as why your naming problem, I don't know on that one.
 

http://www.techspot.com/community/topics/problems-with-nero-burning-rom.1975/
Relevancy 82.56%

I am trying to burn a cd using Nero. When I am ready to burn, Nero gives me the following message: [Drive is being used by another application] My Cd-Rw which is my drive D is not being used by another app. My Cd-rw works on all other apps. It has worked perfectly with Nero until this morning. I reinstalled
Nero thinking that would solve the problem, but it did not help. I am stuck. Hope someone can help.
 

A:Nero Burning Rom problem

Do you have a formated CD-RW in the drive? If so then INCD would have the drive is use. You could also try disabling XP's Recording Support, if you have XP, by going to My Computer right click on the drive and go to the Recording Tab.
 

https://forums.techguy.org/threads/nero-burning-rom-problem.283056/
Relevancy 82.56%

Hi is anybody else experiencing this issue when trying to burn videos as data cds using Nero This is the error log i got on my last try so far i ve wasted disks Windows XP 6.0 burning using Nero Error when IA WinAspi - ahead WinASPI File D Program Files Ahead nero Wnaspi Error when burning using Nero 6.0 dll Ver size bytes created PM Nero version Nero Express Recorder lt SONY CD-RW CRX E gt Version QYB - HA TA - Adapter driver lt atapi gt HA Drive buffer kB Bus Type default - gt ATAPI detected ATAPI CD-ROM lt ATAPI CDROM gt Version BJ - HA TA - Adapter driver lt atapi gt HA Scsi-Device-Map DiskPeripheral ST A atapi Port ID DMA On DiskPeripheral ST A atapi Port ID Error when burning using Nero 6.0 DMA Off CdRomPeripheral SONY CD-RW CRX E atapi Port ID DMA Off CdRomPeripheral ATAPI CDROM atapi Port ID DMA Off CDRom-Device-Map SONY CD-RW CRX E G CDRom ATAPI CDROM H CDRom AutoRun Excluded drive IDs WriteBufferSize Byte ShowDrvBufStat BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Inquiry Global Bus Type default Check supported media Disabled CD-ROM ISO PM Text File Isodoc cpp Line Iso document burn settings ------------------------------------------ Determine maximum speed FALSE Simulate FALSE Write TRUE Finalize CD FALSE Multisession TRUE Multisession type Start multisession Burning mode TAO Mode ISO Level Max of char Character set ISO Joliet TRUE Allow pathdepth more than directories TRUE Allow more than characters in path TRUE Write ISO file extensions TRUE PM Text File Burncd cpp Line SONY CD-RW CRX E Buffer under-run error protection activated PM Text File Reader cpp Line Reader running PM Text File Writer cpp Line Writer SONY CD-RW CRX E running PM ISO GEN - File geniso cpp Line First writeable address x PM Text File Burncd cpp Line Turn on Track-at-once using CD-R RW media PM Text File DlgWaitCD cpp Line Last possible write address on media Last address to be written PM Text File DlgWaitCD cpp Line Write in overburning mode NO enabled CD PM Text File DlgWaitCD cpp Line Recorder SONY CD-RW CRX E CDR code OSJ entry from CMC Magnetics Corporation ATIP Data Special Info hex D A LI F B LO Additional Info hex invalid invalid invalid PM Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt PM Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE indices index not provided original disc pos relocatable disc pos for caching writing not required required no patch infos - gt TRM DATA MODE config wanted index blocks length blocks SONY CD-RW CRX E -------------------------------------------------------------- PM Text File ThreadedTransferInterface cpp Line Prepare recorder SONY CD-RW CRX E for write in TAO DAO infos MCN quot quot TOCType x Session Closed disc not fixated Tracks to TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx CtrlAdr RecDep - lead-in x x - x x x x lead-out x x PM Text File ThreadedTransferInterface cpp Line Removed run-out blocks from end of track Length - gt PM Phase File dlgbrnst cpp Line Caching of files started PM Text File Burncd cpp Line Cache writing successful PM Phase File dlgbrnst cpp Line Caching of files completed PM Phase File dlgbrnst cpp Line Burn process started at x KB s PM Text File ThreadedTransferInterface cpp Line Verifying disc position of item relocatable disc pos no patch infos orig at write at PM Text File Mmc cpp Line Set BUFE Buffer under-run error protection - gt ON SMART-BURN ON PM SCSI - File Cdrdrv cpp Line SCSI Exec HA TA LUN buffer x BF Status x x SCSI ERR HA-Status x x OK TA-Status x x SCSI TASTATUS CHKCOND Sense Key x KEY MEDIUM ERROR Sense Code x C Sense Qual x CDB Data x A x x x xFA x x x x x x x Sense Data x x x x x x x x A x x x x x C x PM CDR - File Writer cpp Line Write error PM Text File ThreadedTransfer cpp Line all writers idle stopping conversion PM Text File ThreadedTransfer cpp Line conversion idle stopping reader PM CDR - File WriterStatus cp... Read more

A:Error when burning using Nero 6.0

Same problem - Write error on Windows XP with Nero

I have the same problem and I've already wasted 15 CDs.
If it helps, I can tell you what I've tried out...
1) Disable de service: "IMAPI CD-Burning COM Service" because it has compatibility problems with CD burning software
2) Install ForceASPI
3) Reinstall Windows XP without using service pack 2

I've tried those suposed solutions but had no luck. Maybe it works for you.

If you find a solutions please post it.
Thank you.
 

http://www.techspot.com/community/topics/error-when-burning-using-nero-6-0.18111/
Relevancy 82.56%

Hi everyone

I have problem with Nero burning for VCD. When I burn VCD, I received an error message that said, "Power calibration error", then it stopped burning. Can someone let me know why and how can I fix it? Please!

Thank you very much for your help.
Phil
 

Relevancy 82.56%

Have a file that's 1hr 20min 07 sec. When I try to burn with Nero I'll get the "Overburn" option where it will state possible damage to my computer if selected. Will it really screw things up if I try it?
 

https://forums.techguy.org/threads/nero-audio-burning.284946/
Relevancy 82.56%

Hello All,

I just got done with reformatting hardrive and reinstalling windows xp and backed up my photos with nero cd/burning rom program.. I used the backup wizard and did exactly what it said.. Finished by saying everything was backed up successfully.. Now the problem.. I can not restore the pictures. They have a NCO extension added to each file... Are my pictures lost.. Please tell me there is some way to restore these pictures..

V/r
 

Relevancy 82.56%

Hi folks I ve searched the forum for this question but burning nero DVD error the only solution I found was one I have already tried amp was unsuccessful I ve checked for driver updates and it reads as up to date not sure what else to do I bought a new computer in december and DVD burning with nero DVD burning error nero seemed to be just fine for about a month but recently I can t seem to burn any DVDs and at times audio or data CDs mainly though the problem is with DVDs I seem to go between write errors or power calibration errors I have already tried IMAPI properties solution but had no results I m not sure what type of system information is required so if somthing is needed I can post it this is the last error log I recieved Windows XP IA WinAspi - ahead WinASPI File C Program Files Ahead Nero Wnaspi dll Ver size bytes created PM Nero API version Using interface version Installed in C Program Files Ahead Nero Application ahead Nero - Burning Rom Internal Version Recorder lt PIONEER DVD RW DVR- gt Version - HA TA - Adapter driver lt atapi gt HA Drive buffer kB Bus Type via Inquiry data - gt ATAPI detected ATAPI Connected to MMC as unknown drive with class-nr Drive is autodetected - recorder class Std MMC recorder Scsi-Device-Map CdRomPeripheral PIONEER DVD RW DVR- atapi Port ID DMA On DiskPeripheral ST AS atapi Port ID DMA On CdRomPeripheral NT J RVD F dtscsi Port ID DMA Off CdRomPeripheral AXV CD DVD-ROM B a scsi Port ID DMA Off CDRom-Device-Map PIONEER DVD RW DVR- E CDRom NT J RVD F I CDRom AXV CD DVD-ROM J CDRom AutoRun Excluded drive IDs WriteBufferSize Byte ShowDrvBufStat BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Inquiry Global Bus Type default Check supported media Disabled NeroAPI PM Phase File APIProgress cpp Line DVD-Video files reallocation started PM Phase File APIProgress cpp Line DVD-Video files reallocation completed no file modified PM Phase File APIProgress cpp Line DVD-Video files sorted PM Text File Reader cpp Line Reader running PM Text File Writer cpp Line Writer PIONEER DVD RW DVR- running PM Text File AudioCompilationImpl cpp Line DRM StartDrmRecording RealRec ImageRec Copies DRM Beginning burn process PM ISO GEN - File geniso cpp Line First writeable address x PM ISO GEN - File geniso cpp Line First writeable address x PM Text File Burncd cpp Line Turn on Disc-At-Once using DVD media PM Text File DlgWaitCD cpp Line Last possible write address on media MB Last address to be written MB PM Text File DlgWaitCD cpp Line Write in overburning mode NO PM Text File DlgWaitCD cpp Line Recorder PIONEER DVD RW DVR- Media type DVD-R Disc Manufacturer RITEKG - Disc Application Code Disc Physical Code PM Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt Insert empty disc to write to Medium in drive unknown Medium required by compilation DVD R RW DVD-R RW DVD-R DL DVD R DL PM Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE indices index not provided original disc pos relocatable disc pos for caching writing not required required no patch infos - gt TRM DATA MODE config wanted index blocks length blocks PIONEER DVD RW DVR- -------------------------------------------------------------- PM Text File ThreadedTransferInterface cpp Line Prepare recorder PIONEER DVD RW DVR- for write in CUE-sheet-DAO DAO infos MCN quot quot TOCType x Session Closed disc fixated Tracks to TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx CtrlAdr RecDep lead-in x x x x x x lead-out x x PM Phase File APIProgress cpp Line Caching of files started PM Text File Burncd cpp Line Cache writing successful PM Phase File APIProgress cpp Line Caching of files completed PM Phase File APIProgress cpp Line Burn process started at x KB s PM Text File ThreadedTransferInterface cpp Line Verifying disc position of item relocatable disc pos no patch infos orig at write at PM Text File DVDR cpp Line Recording mode Sequen... Read more

A:nero DVD burning error

Here's a thread from another forum that mentions a couple of fixes. I'd try a cleaning kit, then the fix mentioned here. http://www.gidforums.com/t-1805.html
 

https://forums.techguy.org/threads/nero-dvd-burning-error.445263/
Relevancy 82.56%

I burn CD's almost every week and now Nero has decided to stop burning the CD's. They are all multiple audio tracks ranging from 5-15 tracks.

I did manage to burn the one just now.

The message I am getting is an instand abort and "the file [insert first name of track to be burnt] is not compatible" then it pops out my disc.

This is the strangest thing and I am desperately in need of burning this music for a birthday party tomorrow.

Can anyone please help?

thanks
 

A:Nero has now stopped burning my CD's

try windows media player if you desperate to get it done for the party,have you bought some dodgy discs? you need to burn with something else to test to see if your burner is ok,ashampoo do trials for a month that may help
http://www.ashampoo.com/frontend/products/php/product.php?session_langid=2&idstring=0710
 

https://forums.techguy.org/threads/nero-has-now-stopped-burning-my-cds.552290/
Relevancy 82.56%

Hi, I recently made a Nero photo show (I have Nero Deluxe 4) and burnt a DVD to be able to play it on my TV. When I watch the show from the DVD on the computer and the TV, the pictures seem "shaky" and fussy. Nero Tech support suggested that I update the firmware on my DVD recorder, after I sent them a CAB file. I did and tried again with the same bad results. The dimensions of the pictures are about 2272 x 1704 or 1800 x 1200. I also did a test in which I reduced the size (also suggested by Nero Tech) but increased the resolution of the picture (I used photohouse to modify my pictures). That did not work either. I am not sure what else to do. Any help would be much appreciated. a
 

A:Nero problems when burning a DVD

Have you tried to burn another DVD? It sounds like you could have a screwy DVD drive.

Regards
 

http://www.techspot.com/community/topics/nero-problems-when-burning-a-dvd.70007/
Relevancy 82.56%

Hello I was told it would be easier to converse on this issue if I started a new thread instead of using someone elses so I have I wasn t sure whether to put this in the software or hardware forum but I decided here in the end Here is the background information WINXP Home fully updated Pioneer DVD-RW DVR- Drive Using Staple Cheap Media and Sony media as well I use my burner to make both audio cdrs and data cdrs avi s from my harddrive Up until three days ago both of these processes worked very smoothly on my PC with Nero Then three days ago as I was dvd-rw/nero burning problems attempting to burn an avi to a data disk I suffered two consecutive buffer underuns I didn t think this was much of an issue because after examning the file it appears that it was missing some dvd-rw/nero burning problems bytes of data at the end and was therefore corrupt Fast forward to the next day I then proceeded to burn other data disks and according to all observations of the burning procedure it went by smoothly When I went to check the disk afterwards I popped it into both drives and came away with a quot Drive is not accessible incorrect function quot error This happened repeatedly with every data disk I burned afterwards utilizing Nero A data disk burned with the native XP burning capabilities also failed to work in the same exact manner I then tried burning an AUDIO cdr and these actually work without a hitch My stereo and computer can read the finished product flawlessly The dvd-rw drive appears to have suffered no damage when it comes to reading disks and can still burn audio cdrs perfectly I then tried out various types of ASPI ranging from Force to the newest alpha to Nero s own all without success Nero was reinstalled and even cleared from the registry numerous times over this process I also upgraded to the latest version of Nero which is supposed to be XP compatible and it failed to work I have tried some crazy things like reinstalling the drive and logging into a different XP User Upgrading the firmware doesn t seem to be an option I was about ready to give up and call it a hardware problem when I decided in one last ditch attempt to download a different burning program I downloaded CD Mate and ran the free trial I burned the same exact data disks that fail to come out correctly in Nero and to my surprise they worked So it appears my drive has not died and gone to heaven after all Both types of media burned successfully Although it works CD Mate seems to be a sketchy program that rarely gives me the desired write speed and stuff anyway I d definitely rather use Nero It was working perfectly up until a few days ago when it just pooped for no reason I can find I did not make any updates to Windows at that time nor did I add in any new software or hardware I have tried Nero again for data disks following CD Mate s success even changing options from track-at-once to disc-at-once and still cannot burn a useable cdr I am planning to buy a Lite-On drive to see if that works but it really puzzles me that data disks work with CD Mate and audio disks still work with Nero What if it really is a software issue and a new drive doesn t solve the problem Another thing I am thinking of is buying a new hard disk and moving all my data there to reformat and see what goes on I d like to avoid that as well though if you have any suggestions Thanks Brian nbsp

Relevancy 82.56%

Hi Guys, can someone help me with a nero 8 burning problem please.

I receive the following message:


18:29:20] NeroVision
[18:29:20] NeroVision Existing drivers:
[18:29:20] NeroVision Registry Keys:
[18:29:20] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
[18:29:20] ExpressUI Burn process failed with status 3
[18:29:39] AMCUIBase Setting 'ENU' as Nero File Dialog language

thankyou
mick

A:Nero 8 Burning Issue

Try this: ExpressUI Burn process failed with status 3 - Official Nero Forum

http://www.techsupportforum.com/forums/f10/nero-8-burning-issue-613717.html
Relevancy 82.56%

I'm trying to burn a dual-layer DVD but am having a hard time knowing the maximum size limit.

I'm told a DVD9 can hold 8500 MB. Nero 6 says my DVD files take up 8432 MB. But it also says anything over 8125 MB requires an overburn, and it won't even do that with these files, because they're too large.

How do I verify exactly how much data is on my disk, and do I need other software to burn the full 8500 MB?

I'm using Verbatim DVD+R DL discs, and it says they hold 8.5 GB.

Thanks,

Mark
 

Relevancy 82.56%

If I download .avi's that are video clips, can I just burn them onto dvd's and they will play on north american dvd players?? or is there something special i need to do first...also with multiple clips, how will it play them??? is there a way to seperate or anything??? thanks!!!
 

A:Nero 6 Ultra Dvd Burning

Only the most recent DVD players can play .avi's directly and even then you have to choose a model that can - most can't. You'll probably have to convert/make a videoCD (VCD) or a super videoCD (SVCD) out of them onto a normal CD disc or convert to DVD video for playback on a DVD disc.
 

https://forums.techguy.org/threads/nero-6-ultra-dvd-burning.379140/
Relevancy 82.56%

Hi guys

I did try to burn the file (2-3GB) because is large I should do it with UDF format in NERO and it did burn it success but when I was trying to watch it in dvd player (stand alone) and my dvd player is reading all kind of format . anyway when I try to watch it from 1 hour movies i just can see the 16 minutes of the clip and stopped . the clip is with mpeg format .
is anybody got this problem ? is it some way to solve ? i was trying find out maybe I have to change the setting of UDF in NERO but that doesn't solve the problem and I don't think is problem with media DVD because i did burn the same media and i didn´t have any problem .

Please inform me .

thx
 

Relevancy 82.56%

Hi,
i use to use nero 6.6 to burn all my CD.
but sundenly, all the CD i Burn have a error.
I burn a RAR file and than test it, allways have CRC error, it say that the file is corrupted. but in nero program it said that it was successfully burned.

i am using winxp sp2 (never have problem with this before)
512MB RAM.
and using the same blank media CD.

i try to uninstall it, reinstall it, it doesnt work.
I had this problem couple year ago, i have to format my windows to make it work again.

Please help.
 

A:Nero 6.6 burning problem.

Hello and welcome to Techspot.

If as you say you are running sp2 then you need to get a patch for Nero from the Nero web site.

This is because of an issue with sp2 and Nero.

Regards Howard

:wave: :wave:
 

http://www.techspot.com/community/topics/nero-6-6-burning-problem.17853/
Relevancy 82.56%

Apologies if this topic has been covered, I couldn't find anything using the search facility.

Basically it looks as though Nero 7 does not recognize my dvd drive. I can encode/set up menus/chapters etc., without any problem but when I get to the 'burn' option at the end it only displays "image recorder" as a device to write to. I can save a disc image to my hdd but encounter the same problem if I try to burn that to a dvd-r as a dvd movie.

The info on my d: drive is HL-DT-ST dvd+-rw GWA4164B & I'm using XP Home Edition.

Any help would be greatly appreciated as (I think) I've gone through every possible option/setting in the software.

Thanks in advance.
 

A:Nero 7 Burning Problem

Launch Nero and run the Nero InfoTool to see if it detects your dvd drive - it may be that Nero has "lost" the d drive even though it is still ok in Windows ( happens to me on rare occasions) .
 

https://forums.techguy.org/threads/nero-7-burning-problem.555740/
Relevancy 82.56%

I have a friend that I have been trying to help burn DVD's. He records his videos with Tivo to his computer. He then uses Nero Vision to burn the DVD to DVD -R and RW's. The video plays fine for about 15 minutes then just cuts off and goes back to menu. You can fast forward or pause or anything. It just goes back and cuts off. And the quality isn't that good. Things in the background are kinda fuzzy. Ive tried recording at a slower speed and it doesn't help. Tried using different types of DVDs to. Should i try another software like Roxio? Or maybe try a new drive? Please help. Thank you all.
 

A:Nero Burning DVD Problem Help?

He needs to burn at x2 or x1 for the best results.
 

http://www.techspot.com/community/topics/nero-burning-dvd-problem-help.85166/
Relevancy 82.56%

So I have a .iso file I'd like to put on DVD. I tried Nero, first go around i didnt un-check the verify file content, so once it was done burning it just sat at 0% of "verifying file components". I aborted the the burn and started over again. This time the burn only took 20 minutes and when I ejected the DVD-R from my drive i could see the movie was BURNT into the DVD. I tried poppin it in my multiple DVD players and it was unreadable. I've just tried the burn again with nero and as it was on the final stage of "writing disc" I got a Blue screen physical memory dump crash :/. I'm probably going to give it another go, does anyone know why this is happening?

A:Nero / Burning to DVD problem

Do other burning programs give the same issue? Try this one and have a look

http://www.techsupportforum.com/forums/f217/nero-burning-to-dvd-problem-343983.html
Relevancy 82.56%

K, I am trying to burn a movie to a dvd, my problem with nero is, I have all the files need but I have to drag them into the video-tsfolder, it will let me drag them all but video_ts.bup and video_ts.ifo these files won't move and even if I highlight them with the folder it still says they are missing...any ideas?? newbie burner here...haven't a clue what I am doing, they were originally mpg files and converted them to vob..
 

Relevancy 82.56%

I am using Nero 7 Ultra and burining cd's with the default Nero Burning Rom app. When i burn an audio disc everything goes fine, except when i play them back in my computer or cd player the all the songs have skipping. The skipiing is written into the songs though, the track timer does not show any skippping. I know that the mp3s used to burn the cds do not contain the same skipping and are of good quality. I also do not believe the problem is with my disk drive because when i used a different application (itunes) to burn the same cd, the skipping was gone! Please help! I'm sick of waisting cd-rs trying to fix this problem!!!
 

A:Nero 7 burning problem!

Burn at a lower or lowest speed, that should fix it hopefully.
 

https://forums.techguy.org/threads/nero-7-burning-problem.480806/
Relevancy 82.56%

Nero stops burning dl dvd-r when is on 52%
What to doing?
 

A:Nero 8 stops burning DL-DVD-R

Are you even using the correct format for the project that you are burning via Nero.

Is it a home movie or a data disc?
 

https://forums.techguy.org/threads/nero-8-stops-burning-dl-dvd-r.752595/
Relevancy 82.56%

hey guys i need help
can anyone tell me how to burn nero .tmp files which are
located in the TEMP folder
thanx alot
 

https://forums.techguy.org/threads/nero-burning-tmp-files.309616/
Relevancy 82.56%

Alright i have been stumped as too how to burn a Downloaded Movie 2 a DVD.
I have tryed both methods as far as a data DVD and a regular DVD can some one plz explain how i can get this 2 work. Another thing the times i have completed this i will try it in my DVD player the list of movies will come up but when i press play it just reverts back 2 the list....
Any suggestions?