Windows Support Forum

Solved: MPeg2 Icon/Not showing begining video clip

Q: Solved: MPeg2 Icon/Not showing begining video clip

Hi! I have a Sony DCR SC82 HDD video camera. I had my 500gb hard drive fail (and replaced) I have reinstalled the Sony program. I have gone into Motion picture browser and selected the my drive F: (500gb) be the registered viewed folder. I only have the MPEG2 video icon show up. I cannot get the beginning video clip to display. I have checked to see if the MPEG2 option has been checked, everything thing else seems to be the same. BUT no opening video clip. It makes it rather hard for editing when all you see is the same icon..... Any ideas??? Please.
Thank you in advance.

Relevancy 100%
Preferred Solution: Solved: MPeg2 Icon/Not showing begining video clip

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: MPeg2 Icon/Not showing begining video clip

Once again it was the codec's. I downloaded the codec pack All in 6.03.0 and problem was solved just like that! I had forgotten this from last time....... When my computer died, I lost all of my saved "life savers links".

https://forums.techguy.org/threads/solved-mpeg2-icon-not-showing-begining-video-clip.694029/
Relevancy 81.53%

I had this problem before, but for the life of me I cannot remember how to fix it. My new camera does video in avi format. Once I have downloaded the files all that is showing is the AVI icon. How do I get it to show the beginning video clip? I have 30 avi icons and have to go through each one to find out what is on it.......
 

Relevancy 75.25%

Its becoming common to have the little video cameras which captures videos on Mpeg4. I for one have many video Mpeg4 clips which i burn to DVD using Nero vision. Nero vision is a simple editing software which creates Home made DVD from selected video files. BUT, I have one problem. How to grab the file dates of the mpeg4 to appear on each video clip so that when we watch the home burned DVD video, we can see what date the video clip was filmed. Any Advise from this forum would be very very much appreciated.[/
 

A:Help- How do I burn mpeg4 home video on dvd & showing the Mpg4 file date on each clip

https://forums.techguy.org/threads/help-how-do-i-burn-mpeg4-home-video-on-dvd-showing-the-mpg4-file-date-on-each-clip.587293/
Relevancy 71.81%

I have three short videos that I would like to compile on to one DVD. The burn process, worked, the disk shows the 3 separate folders but will only play the first movie. Is there something I am doing wrong?
 

Relevancy 71.38%

Hello, I have just bought an 8GB Sansa mp3 player. I have fully charged it but the device is not showing up anywhere on my computer or in media player. The radio is functioning ok. How do i get the mp3 part working?

Thanks guys,
Shane
 

Relevancy 67.94%

I'm having problems where I can't see my video thumbnails on Windows 8.1 Preview, also - I don't know which ones I'm going to click at and play. Is there a way to solve this problem, so I can see my video thumbnails, just an icon with an white paper as an background of the icons.

The image below is the problem I'm having at the moment which I can't see the video thumbnails, just an icon with a white paper background:

The video thumbnails works alright in Windows 7 Home Premium that we used to have.

Thankyou for reading!

Regards,
~Benjamin123
Windows 8.1 Enterprise Preview (I'm going to have a full version soon)

A:Video Clip Files (MOV Files) - Not Showing

I would try Quicktime Alternative if Quicktime is not already installed. If you already have Quicktime report back to take the next step.

http://www.eightforums.com/general-support/34308-video-clip-files-mov-files-not-showing.html
Relevancy 65.79%

Hi guys,

i am trying to play a videoclip through wmp 10 and i can see the clip and it plays well just no audio.

when i try to play it through div-x it is the same but has a message (extra audio data:tag 8192) and says might need another audio codec to hear audio.

any help on this would be great
thanx again
 

A:Solved: no audio with video clip

Hi, Your thread is marked "Solved".... what did you do to solve it?

Install a codec pack, or did you do something else?
 

https://forums.techguy.org/threads/solved-no-audio-with-video-clip.457406/
Relevancy 65.79%

I've downloaded a Flim, labelled as a DvDrip and its file type is shown in properties as 'Video Clip'.

What format is this.??

I want to use in a TV/DVD Player, so what software do I need to burn it in DVD format, which is ??..

Thanks
 

A:Solved: Video Clip to DVD ?? Software

Used ConvertXtoDvd program, tried others but didnot work.
 

https://forums.techguy.org/threads/solved-video-clip-to-dvd-software.720672/
Relevancy 65.79%

Have done some video clips on my Medion camera, and although I can watch them on the camera, they won't run when downloaded to the computer. It says the clip is an avi file, i watch the clips through infranview. The error message says there's no mpeg decompressor.
abermapman
 

A:Solved: video clip won't run on computer

did you try them in WMP? i found this at there site

Q: Problem: If I try to play some AVIs, I get the error message "Video not available, cannot find MJPG decompressor"!
A: Method 1: Go to 'Properties->Video' and activate the option: 'Use DirectShow for playing'.

go here and read
http://www.irfanview.com/
 

https://forums.techguy.org/threads/solved-video-clip-wont-run-on-computer.611558/
Relevancy 65.79%

I have a lot of video clips and I want to take a small part of each one,put them all together,add some music and make a brand new video clip.My main problem is how can I cut a video clip to small pieces,to get the part I need?
 

Relevancy 64.93%

I have just up graded to WMP 7.01 and it runs fine. While going through and running some video clips, one with .asf extension would not play the video. The sound was there, but not the video.
I looked for some settings that might be wrong, but nothing jumped out at me that might be wrong.

Can someone help me?
 

Relevancy 64.93%

I have some video's that I took a while ago and it was either taken on a phone or a camera stored on the S D card and then transfered to my computer. Now when I try to transfer those video's back from my computer to abother S D card a pop up comes up and says that this Disk is write protected and I have to take it off in order to move. I have no clue to what that is or why and hope someone can tell me how or what I can do ?
 

Relevancy 64.93%

Hi
I've converted an AVI to MPEG2. I think I can just burn it on a DVD as a data disc and it should play on my DVD player (I've got one that plays DivX).
Is that correct?
There's also a tool called dvd video in my burning software that enables you to put your file into video_TS before burning, but my mpg2 won't go inside it.
I believe I can change my .mpg file extension to .VOB and that this might then go into the video_TS folder. Would there be any point in doing this? Just want to watch the clip on my dvd player.
TIA
 

https://forums.techguy.org/threads/solved-putting-video-clip-on-dvd-for-player.1062387/
Relevancy 63.21%

Hello,

When I am trying to play a downloaded torrent movie, the windows media player is opening and then only the sound comes with a green square. No pictures appear in the square. Just a plain green square. Under properties for the file it says, "Video Clip".

I updated the graphics drivers and also have the latest java updates. The funniest part is that in the same course of download there are other files which are playing perfectly. It's just a couple of them that are not playing.

Request you to please let me know how to overcome this trouble.

Regards.

A:[SOLVED] Green rectangular box when trying to play fully downloaded video clip

Please read the Rules.

We can't help you with anything that's to do with pirated software or files. Sorry.

http://www.techsupportforum.com/forums/f10/solved-green-rectangular-box-when-trying-to-play-fully-downloaded-video-clip-336060.html
Relevancy 61.92%

Hi,

I am trying to decode mpeg2 video in yuv and then encode it in mpeg2 video.
I have successfully done it with h264 video by using x264 library of ffmpeg.
But I did not get proper yuv data while decoding mpeg2 video.
Let me know if anyone had done it with mpeg2 video.
May be I am using wrong library.
pls suggest me the proper AVCodecContext setting to decode and encode mpeg2video.

Thanks
Dhaval

A:Mpeg2 Video encode and decode using ffmpeg

Try posting to the Intel Forum for better results http://www.intel.com/content/www/us/...anguages=en_US

http://www.techsupportforum.com/forums/f10/mpeg2-video-encode-and-decode-using-ffmpeg-653964.html
Relevancy 61.49%

I converted a file from windows media file to mpeg2. It was a 2mb file that went to 14mb. I was wondering if this was normal for it to be so large.
 

A:question about video converter from windows media to mpeg2

yes... windows media files are a proprietary version of mpeg4, while mpeg2 offers less compression.
 

https://forums.techguy.org/threads/question-about-video-converter-from-windows-media-to-mpeg2.402311/
Relevancy 60.63%

The reason I am asking is because I downloaded a movie and it is an Mpeg1 file which is really blocky and blurry to boot. I was wondering if anything would be better if I were to convert it to mpeg2 and burn it as a svcd. If that doesn't help, is there anything I can do to clear up blurryness and blockiness on a video file? Thanks again!
 

A:Is there an advantage of converting a Mpeg1 video file to Mpeg2 (svcd)?

TTT, please help
 

https://forums.techguy.org/threads/is-there-an-advantage-of-converting-a-mpeg1-video-file-to-mpeg2-svcd.69499/
Relevancy 60.2%

Hello...
I've just brought Sansa Clip+ 2GB MP3 Player...
I've plugged the usb cable into my computer and I've noticed It isn't showing me the full size...

I've got only 1.60GB Free from 1.80, I did a format from the mp3 itself and from the computer...

Picture: http://i52.tinypic.com/2ivl5d1.jpg

There isn't any hidden files or system protected files...

How can I solve this?

A:Sansa Clip+ - Not showing full capacity

The space has probably been taken up by firmware. The MP3 Player will need this to run.

Formatting wont get rid of it as it will most probably be locked by manufacturer.

Whatever you do, do not delete that firmware as you will only end up having a fqancy looking USB stick.

Lucky

http://www.sevenforums.com/hardware-devices/109435-sansa-clip-not-showing-full-capacity.html
Relevancy 59.77%

fixed, close thread.

WMP never showed on start menu, upon restart it now works :S.

CONFUSED!

Solution = restart
 

A:Solved: WMP icon not showing

hiya Mangoh,try this,delete the wmp file in startup,go to My computer>program files>wmp and open the folder,go down the list and right-click on the wmplayer icon and select "Pin to start menu" close all windows and reboot,try now
 

https://forums.techguy.org/threads/solved-wmp-icon-not-showing.1016806/
Relevancy 59.34%

and when I click on place icon on desktop I have the message saying the volume control program has not been installed. I've tried to find the file sndvol32.exe but it doesn't seem to be nowhere. I don't possess any restore disk.

Thanks for help
 

Relevancy 58.48%

On windows 8.1, my taskbar, one day, suddenly stopped displaying the audio icon on the taskbar. When I right click it, go to the properties, and click customize, it doesn't show the audio icon as an option. When I click, "turn system icons on or off," I can see the audio icon, but it is locked to off. I don't know where to look from here.

A:[SOLVED] Not Showing Audio Icon On Taskbar

Method 1:
There is no option available in control panel volume settings to show volume icon like earlier operating system. In Windows 8 and 8.1 you can enable volume icon by modifying ?Turn system icons on or off? option.
Right click on or near time clock in notification area and select Properties.



Make sure Volume icon is set ?On? as shown below, if it were off, make it on to show volume icon.

If the above step hasn?t help, ?Restore default icon behaviors? which may bring back the missing icon.



This is the normal procedure to get back the volume icon. In case the Volume icon option ( on/off) grayed out and you can?t change it, then follow the method 2.

Method 2: If volume icon is missing and you can?t enable it from ?Turn system icons on or off? area, then that could be an issue with explorer process. The following two methods can solve the issue.
a) Kill the explorer.exe from Processes or Details tab under task manager. Find out all explorer.exe and kill them, make sure no explorer.exe is running in the task manager. After that, on the file menu select new process or Run (or new tasks), type ?explorer? and press OK. It will start the new explorer process. That should bring back the volume icon, if it hasn?t, redo the method 1

This method has brought back missing volume icon on my Windows 8.1 computer.
b) Registry modification- Its recommended to take a backup before modifying registry.
Open registry editor in Windows and find out;
HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify

After modifying registry keys, you need to kill and restart the explorer.exe process to take effect.
-- Source: Volume Icon Missing on Windows 8 or 8.1, How to Get it Back? --

I hope one of the above method will fix your issue!

http://www.techsupportforum.com/forums/f320/solved-not-showing-audio-icon-on-taskbar-941097.html
Relevancy 58.48%

I had to do a clean install on a new hard drive and since then have not been able to get my task bar balloons to show. For example, when using the Safely Remove Hardware icon, I don't get the Now Safe To Remove balloon. I only get a popping sound. When running a Mcafee virus scans, I can't view the scan progress when resting the cursor over the icon. I do get the identifying pop up and that is all. I've tried the log off and on tip but it didn't work. Can anyone help me?

A:[SOLVED] taskbar icon balloons not showing

I solved my problem with TweakUI. It had the option to "enable balloon tips."

http://www.techsupportforum.com/forums/f10/solved-taskbar-icon-balloons-not-showing-239335.html
Relevancy 58.05%

Hello Group,

Struggling with a Powerpoint problem, hopefully an easy solution ...

I have several different video files I want to activate by clicking a mini-logo.

This works fine, each viedo plays to full screen and returns to the Powerpoint page ... but the mini-logo is blacked out, even though by clicking it the video will play again.

How can I preserve the original logo picture and not have it blacked out after I click it?

Thanks for looking in.

Charles
 

Relevancy 58.05%

Somehow I lost this icon from the startup tray and I have no idea what program to use to restore it. Any suggestions?
 

Relevancy 58.05%

hey little trouble here. My WD Passport 120 GB. isnt showing up on screen. On the system tray the safely remove option is available , hence proving that its being detected by my comp. but the icon wont show. i tried start/run and typing the assigned drive letter and that worked too. but doing that every time is a bit too hectic. so if any one has overcome this similar challenge plz do advise!
 

Relevancy 57.19%

i can see it sometimes but most of the days i can't see it & whenver i see it & then if i remove ny of mine micro sd card or pendrive it shows that i connect a massage comes up ( you can't remove it now please try to remove it later )
wt... please help

A:[SOLVED] PC is not showing safely remove hardware usb icon in task bar ??

hi, right click on the start button and choose the taskbar tab, and uncheck Hide inactive.
When you get the message saying you can't remove it, do you try again later and does it work.

http://www.techsupportforum.com/forums/f10/solved-pc-is-not-showing-safely-remove-hardware-usb-icon-in-task-bar-624783.html
Relevancy 57.19%

I installed the JRE6 update 10 Beta and the Java Icon is not showing in the Vista control panel. I have done two clean reinstalls. By clean installs , I mean that I uninstalled JRE each time and made sure it was off my computer before I downloaded and installed it again. I rebooted each time. No matter , The Java Icon is not in the computers control panel. So I cannot get the Java control panel opened because it is not there.

Please help me and thanks in advance
 

Relevancy 57.19%

Hello!
I am running Windows 7 64bit on a Toshiba laptop.
As you see in the attached photo, the connections information icon shows "wireless connections are available" status even though I am connected! I am connected via hotspot (with a program called Connectify) to another laptop which has wired connection. I have no problems with the connection itself, but only with that status icon's wrong display.

This happend after I installed software for a bluetooth usb adapter. I have searched the web for the same problem and tried the suggested fixes: uninstalled the software, uninstalled the network adapters (wired and wireless), deleted iconchache.db file but none worked for me.
This problem is really driving me nuts so I would appreciate any suggestions on how to fix it!

Thanks!
 

Relevancy 56.76%

I have a toolbar on my taskbar titled "Programs". It has about eight folders in it. I made another toolbar, and placed it directly adjacent to the Programs toolbar, to obscure the eight folders and force it to be a dropdown menu.

Trouble is, as soon as I lock my taskbar, right next to the arrow that displays the eight items of my Programs toolbar in menu-form, one of the eight items is showing up as an icon, as if the other toolbar isn't close enough to the Programs toolbar in order to completely obscure the eight items.

Here's what I mean in graphic form:



It's bugging me to no end. Anyone else had this problem/resolved it?

A:Toolbar on taskbar should only be showing an arrow but is showing icon

Hello thewonkits, and welcome to Seven Forums.

I notice this happens when using small icons for a toolbar. If you like, you could unlock the taskbar, right click on the dotted separator line to the left of the two top far left toolbars (one at a time) click on View and Large Icons, then lock the taskbar to see if that may look ok to you. It will make the top row a bit bigger though.

Hopefully someone may know a better way to hide that bit of icon poking out when locked.

http://www.sevenforums.com/customization/230380-toolbar-taskbar-should-only-showing-arrow-but-showing-icon.html
Relevancy 56.76%

Really weird, see attachment.. Tried resetting the icon cache. It's like this on all of my desktop icons.. any ideas?

A:White 'File' icon showing over top of normal desktop icon

Hello JingleJangle, and welcome to Seven Forums.

It looks like your shortcut arrow overlay icon got messed up somehow. You can use either method in the tutorial below to restore the arrow icon. Method Two is the easiest way with the program.

Shortcut Arrow - Change, Remove, or Restore

Hope this helps,
Shawn

http://www.sevenforums.com/general-discussion/108273-white-file-icon-showing-over-top-normal-desktop-icon.html
Relevancy 55.9%

Hi All,

I recently recorded a video clip using my Fuji Digital Cam but somehow

the video turned sideways is there anything i can do to correct this ??

ANy suggestions would be greatly appreciated

Thanks

Tumang2k
 

Relevancy 55.9%

Hello For some strange reason I have been having a great deal of problems with video clips on my pc mpeg wmv etc are fine its the file type that specifies it to be a quot video clip quot that poses the problems According to GSPOT these files are complete and when I transfer the umm clip? video videos to laptop they play fine When opened in wmp or itunes or core or whatever they simply do not play All i see is the very very first screen shot usually black and no audio GSPOT says they use XVID codec so i went xvid website got their preview clip it umm video clip? has no sound to check if i can play xvid and it worked fine but when it comes to playing any of my clips my computer simply refuses to play them I have recoded them to play on psp again they work fine on psp but my pc will not play the file as it is So anybody out there know anything to tell me or how to fix otherwise i think reformatting is imminient Thank You nbsp

A:umm video clip?

happened to me one time. Turns out might have multiple codecs accessing the file at the same time.

go to Control Panel > Sounds and Audio Devices

tab over to Hardware

click Video (or Audio depending on what might be the problem) Codecs and Properties.

Delete all your codecs, then go install only the needed ones, like xVid and diVx along with your standard Windows media codecs package. (microsoft.com)

at least that's what helped me.
 

http://www.techspot.com/community/topics/umm-video-clip.49662/
Relevancy 55.9%

Not sure where to ask his question.
I'm preparing a powerpoint presentation (M.O. 2000 Professional), muddling thru it ok.
My question: On one (or actually several) of the slides, I would like to insert a 'video clip'.
(It's a video clip from you tube).
Is this poissible?
If so, how do I go about it?

A:video clip

  
Quote: Originally Posted by skostro


Not sure where to ask his question.
I'm preparing a powerpoint presentation (M.O. 2000 Professional), muddling thru it ok.
My question: On one (or actually several) of the slides, I would like to insert a 'video clip'.
(It's a video clip from you tube).
Is this poissible?
If so, how do I go about it?


Here's a tutorial .doc

http://www.sevenforums.com/microsoft-office/214975-video-clip.html
Relevancy 55.47%

I understand that there is a program called Divx-to-Dvd which converts Video Clips to Video TS file structures The problem is that I have s of hours of Format DVD to Video Clip video I Video Clip Format to DVD need to convert over from Video Clip format Is the Video Clip format just another way of saying mpeg or something Or does the Video Clip format reflect Divx either way Video Clip Format to DVD thats not my question so nevermind that Dvix-to-Dvd takes far too long it would take me more than hours to convert all these files if it s all I did for two days straight Is there an easier way to get these Video Clip files to go on a DVD that I can Video Clip Format to DVD play in a DVD player Also Dvix-to-Dvd makes individual DVD structures for each Video Clip file I convert It should take approx video clips to fill each DVD space-wise I wonder how I ll be able to organize those individual file structures to fit on a single DVD and be able to choose which to watch from a menu I d like suggestions for both the coherent organization of multiple VideoTS structures into a single dvd AND a faster or better way to convert Video Clip files into VideoTS structures Please This is eating up nearly half of my hard drive gigs total and I need to get it off my computer so I ll have some space Recommend programs and methods galore please nbsp

Relevancy 55.47%

Hi i am a first time user. I have a little video clip on a DVD. I would like to copy it to outlook and email it. I have xp home, pinnacle studio 9. Please help.
Thanks deger
 

A:how to copy a video clip.

Hi deger, welcome to TSG.

Just insert the DVD on your drive, and then go to My Computer, find your DVD drive, then right click to it, select Explore, you can find the clip in there.

When you found the clip, just right click on the file, the select Copy, and then Paste it to anywhere you want. Then when you want attach it with your email, just browse for the file.
 

https://forums.techguy.org/threads/how-to-copy-a-video-clip.413725/
Relevancy 55.47%

Yo i have got a movie on my computer, how do i write it to a dvd-r using nero.. i should know how to do this but i dont as when i go to add it, it asks to add VIDEO_TS and AUDIO_TS files

Do i need nero vision express to do this?
 

Relevancy 55.47%

Is there a way to use a short video clip as the windows desktop instead of still pictures?
 

https://forums.techguy.org/threads/xp-desktop-video-clip-instead-of-pic.581253/
Relevancy 55.47%

Hey, does anyone know of something that's like Windows Movie Maker only it allows you to embed a logo onto your movie clips? Actually I'm just looking for something that will embed my logo onto my video clips. Anyone know of anything that's good and easy to use?
 

https://forums.techguy.org/threads/video-clip-editor.314288/
Relevancy 55.47%

Hey everyone.
Recently, i've capture a video clip with the full version of hypercam 2.14.02.
However, Windows Movie Maker could not import this .avi file that was saved.
So i converted the .avi into a .wmv and still didn't work.
When i looked it up on google, some people were talking about 'codec' and i'm quite confused about it.
All help are appreicated
EDIT: i think it says something about that the .wmv is not indexed
It doesn't have to do with codec but it might
 

A:Cannot import a video clip

NEVERMIND EVERYONE!!
problem solved..
i'm using sony vegas pro 8.0 now
everything works perfect!:approve:
 

http://www.techspot.com/community/topics/cannot-import-a-video-clip.126557/
Relevancy 55.47%

everytime I want to play a certain video clip on Windows Media Player I have
to connect to the internet - is there anyway I can save the clip to the computer's hard-drive?
 

https://forums.techguy.org/threads/saving-a-video-clip.232890/
Relevancy 55.47%

Hi everyone,I have taken a video clip on my digital camera of a family day out and i would really like to be able to turn some of it into still pictures so i can have them printed as photos is there any software i can purchase to be able to do this ? i can pause the clip and move from frame to frame but i cant seem to capture the image.In case it helps i have a kodak z 740 ..Oh and big thanks for the picasso software much better than kodaks own(my opinion).
 

Relevancy 55.47%

When I try and watch a video clip from the internet, I get a green screen, audio but no video. I have downloaded Media Playyer 10, no change. I can hear the audio fine. Can anyone help me?

A:Video clip problem

You need a certain codec to fix the problem. The exact codec I don't know but I know of a codec pack that corrected the problem of hearing audio and not seeing the video. Here is the direct download link for that codec pack http://www.xpcodecpack.com/cgi-bin/d...Pack-1_3_4.zip I hope this solves your problem as well as all other future problems that would of happend. This solves many problems like not being able to view certain movies due to not having a certain codec.

http://www.techsupportforum.com/forums/f56/video-clip-problem-108216.html
Relevancy 55.47%

That will download "miscellaneous" different kinds of
clips, if such exists

example is this kind of thing from www.streetfire.net

http://videos.streetfire.net/hottestvideos/4/097bee97-92b1-4481-8d44-988b0143f7a8.htm

Also I'd love to download this


http://howtoprantatelemarketer.ytmnd.com

Thanks!!
 

A:Looking for video clip downloader

If you're using Firefox, there are such extensions. Simply search on the official plugin site for video download.
 

http://www.techspot.com/community/topics/looking-for-video-clip-downloader.71975/
Relevancy 55.47%

I have an mp4 video clip on my computer, which was taken with a Samsung Galaxy 2 phone and i put it on my computer using the usb cable/usb utilities.
The clip is upright on the phone but on the computer it is on it`s side.
Is there a way to rotate it on the computer please?

A:Rotate video clip

Edit your video with the Samsung Video converter. Videora Samsung Galaxy Converter - Free Samsung Galaxy Video Converter

http://www.techsupportforum.com/forums/f10/rotate-video-clip-720705.html
Relevancy 55.47%

Hello peoples!
Does anyone have an opinion on how to capture an online video clip? Is there a freeware program I could use?
I watch a lot of horse races from web sites and I was wondering how I could somehow download them and save them.
Thanks in advance.

Doctor Gallop
 

A:Video clip capture?

See the replies from year 2006 in Nvidia Dawn (fairy) demo on ATI cards.
 

http://www.techspot.com/community/topics/video-clip-capture.61038/
Relevancy 55.47%

i used to watch internet news video clip before but now no more. i hardly run it now. i followed the procedures recommended by the internet to download latest flash but it failed. please help me. thanks

http://www.vistax64.com/general-discussion/158750-internet-video-clip.html
Relevancy 55.47%

I have a small Samsung digital camera that can take video too. My wife made a video (about a minute's worth) but since she held the camera vertically, the video file is in portrait view, as in the 'bottom' is actually on thr 'right'. Is there anything that I can use to flip it back?
 

Relevancy 55.47%

I have a small video clip of my wife frolicking on the beach in Hawaii that I took with my iPhone. I downloaded the 40 second clip to my hard drive. How do I add music to the video so I can add it to my Facebook.AAO

http://www.computerhope.com/forum/index.php/topic,158174.0.html
Relevancy 55.47%

Is there a way (in ppt), to stop this warning from popping up everytime I want to view a movie clip?

A:Video clip - part 2

I don't think I get that error in Pp2010, I attempted to replicate the error. All i discovered was I have the ability to Place videos off of the internet directly into my slides without having to download anything. I wonder if this is true for 2007? If it is, and you got your video directly off of the internet, you might be able to bypass such an error. You copy the embedded code and paste it into your slide (either that, or using the add video feature). Such as this:


Are you able to do this? Otherwise, I am not sure there is a way to do what you want it to do, as I cannot test your program myself. Try seeing if the error happens with preloaded videos on your computer, or just different videos in general. Look through the settings, etc. for options that deal with this.

*EDIT* Yes, it is the creepy white dude from that video. But I was more curious than is good for me and wanted to see the music video for a song I heard. This is what popped up on my screen about the same time I was testing Pp2010 videos. It was just there. Easily accessible. He doth protest too much.

http://www.sevenforums.com/microsoft-office/215182-video-clip-part-2-a.html
Relevancy 55.47%

I have taken a load of video clips which, when I play them back in either Realplayer or Windows Media player, are all sideways on. I can't find any facility to rotate them, as it is possible to do with regular still Jpegs. Do I have to sit with my head at a 90 degree angle to watch them, or am I missing something obvious???? I am running Windows Vista Business.
Thanks! Lulabelle.
PS Treat me like a dimwit and give idiot proof instructions please.

http://www.bleepingcomputer.com/forums/t/204169/video-clip-playback/
Relevancy 55.47%

I am using this projector in my classroom and I wanted to show a video clip. I am using Wndows XP on an Acer laptop computer. I can see the clip on my pc using windows media player or winamp. It works perfectly. However, when I try to view the clip through the projector so the class can see it, all I see is the windows media player or the winamp viewer. I can hear the clip playing and I can see the timeline showing that it is playing, but no picture is visible on the projector screen. It is visible on my computer screen. It does this if I try to use it in powerpoint as well. The projector is a Canon LV7225. Any suggestions? Thank you.

http://www.bleepingcomputer.com/forums/t/85653/playing-video-clip/
Relevancy 55.47%

I have a small video clip MOV00001.mpg format which I want to annotate by adding an arrow to pinpoint / highlight one part of the picture.  Windows Movie Maker does not seem to be able to do this (nor the various sophisticated Autocad programs at work) but I have seen this done somewhere.  Is there a simple to use free video editor which I could download to accomplish this task (ideally combined with adding a title)? Thanks

http://www.bleepingcomputer.com/forums/t/574735/annotate-mov-video-clip/
Relevancy 55.04%

ever since my last factory restore my network icon shows i am in a local access only but i have access to the web like right now i am on this forum but my computer says i only have access to the not network icon taskbar right icon showing internal network i asked this question in the newsgroup and they said to make sure the services for the network were put down as automatic and that they were started this is the reply i got Double check to make sure that you have the have the Services quot Network Connections quot quot Network List Service quot quot Network Location Awareness quot and quot Network Store Interface Service quot set to Started and Automatic If these are not then it can cause the Network icon to not function properly http www vistax com tutorials -services html Hope this helps Shawn well he was partially right there was something not running and one of them network icon taskbar icon not showing right was manual but it still does the same thing hope someone can network icon taskbar icon not showing right help me also it seems to occur mostly when my aircard is connected it is pcmcia btw it is from t-mobile and i disabled the wifi antenna on the air card since my laptop already has one and it aircard wifi is being a pain because it is trying to connect even tho my laptop antenna is connected which it's why it is disabled edit my apology i wasn't aware that the newsgroup and forum where interconnected but the issue is still not fixed hope someone else has an idea

A:network icon taskbar icon not showing right

*bump* no one can help me further?

http://www.vistax64.com/network-sharing/179014-network-icon-taskbar-icon-not-showing-right.html
Relevancy 55.04%

I have several MPEG4 files that I need to convert to MPEG2. Could anyone advise of what software would be best for this conversion?

Thanks!
 

A:Solved: Convert MPEG4 to MPEG2

Here's a free MP4 to AVI converter from sourceforge if you just want to convert the MP4 into a more manageable format to use in Windows

http://sourceforge.net/projects/mp4cam2avi/
 

https://forums.techguy.org/threads/solved-convert-mpeg4-to-mpeg2.711590/
Relevancy 55.04%

This board is great. Please keep up the great work. Now on to my question. I have a movie that is in 2 parts. It is encoded into the divx format. I really want to make a SVCD. I tried to make a VCD(because of size constraints) out of it with Nero 6. WRONG! The picture was upside down and backwards. After reading some things on this message board, I decided to get TMPGeg Plus and use it. When I walk through the wizard to make the SVCD from the divx file (approximately 70 minutes in length and about 650 mb) it tells me that the size of the new file will be 2700 mb and about 6 hours to encode. I want to put this file on a 700 mb/80 min CDRW. How can this be? I thought it was based on the length of the file and not the size. Please help. Any suggestions would be great!! THANKS!
 

Relevancy 55.04%

Amongst many video clips, SOME show only a 'generic' thumbnail FOR A PLAYER
rather than for the clip content. Make Video Thumbnails can extract JPGs from
(not all) the video clips with extensions like avi, mpg, wmv, swf, flv, etc. So then there are two files with the same name but different extensions (a JPG and a video-extension). How can the video clip file absorb the JPG so that the videoclip will show the image thumbnail, rather than the generic player thumbnail ?
OR - how can the original video clip be 'repaired' to show a content-thumbnail ?
 

A:Repairing a video clip thumbnail

Hi Sebastian
You one thumbnail has jpg under it this could happen if you have accidentally opened up with a graphics program or while editing you put a jpeg in with the video.
 

http://www.techspot.com/community/topics/repairing-a-video-clip-thumbnail.157469/
Relevancy 55.04%

We have a DVD video from our son's high school football game. I'd like to extract just one play and turn it into a flash video so that we can send it to family, or perhaps we'll upload it to YouTube.

I have no experience with video and no video editing tools. What's the easiest and least expensive way to get this job done (besides finding a friend who can do this for me ;-)?
 

A:How to extract a clip from a home video?

Use DVD Shrink (free) to extract the portion (in reauthor mode).

http://www.afterdawn.com/software/video_software/dvd_rippers/dvd_shrink.cfm

And this free app to convert to something else.

http://forum.doom9.org/showthread.php?t=127298
 

https://forums.techguy.org/threads/how-to-extract-a-clip-from-a-home-video.761708/
Relevancy 55.04%

I have 3 videos of my daughter as a baby and someone transferred clips from video to DVD for me. I want to edit the 3 DVDs and put them in the right order. The DVDs are VOB files and I have used PRISM (a web converter to make them AVI files in order to mix and match the clips. They now play upside down! The original DVDs play the right way up. Any ideas?

A:Converting Video Clip Problems

Clicking here might help you sort out your problem, I hope! According to the website the application is free!Let us know how you get on!

http://www.bleepingcomputer.com/forums/t/114810/converting-video-clip-problems/
Relevancy 55.04%

I was interviewed on television news. There is a clip on yahoo that I can view but not download. It is located here:

http://cosmos.bcst.yahoo.com/up/player/popup/?rn=4226712&cl=4761457&src=news

I have read the suggestions on the forum using firefox browser. The unplug add-on cannot do it. The “download them all” add-on does not even have an option to download. And another video downloader says it is in some sandbox?

https://addons.mozilla.org/en-US/firefox/addon/2390

The link may not be available for long so any speedy suggestions would help.

Thanx
 

https://forums.techguy.org/threads/cannot-download-a-video-clip-to-a-file.645730/
Relevancy 55.04%

When I try to watch a video clip from a site like YouTube it keeps starting and stopping the first time through. It then runs uninterupted on the second runthrough. I'm new to this so I expect I'm missing something simple - what?
 

A:Video clip uploads break up

Sounds like the playback is faster than the download. Wait for it to download, then watch it.
 

https://forums.techguy.org/threads/video-clip-uploads-break-up.543473/
Relevancy 55.04%

Hi all.I'm looking for a free YouTube video clip downloader that can handle any type of file extension, and doesn't quit with a notice saying ...I've tried a whole bunch of them, and always something's wrong. Thank you.

A:Need a YouTube video-clip downloader.

I have used the DownloadHelper extension in Firefox to do this, however I am unsure about the "can handle any type of file extension" bit.

http://www.bleepingcomputer.com/forums/t/322857/need-a-youtube-video-clip-downloader/
Relevancy 55.04%

Hi there
Can anybody please tell me how I can add motion and still images to already finished video clip's-for instance say I want to add a image fading in across the screen of a music video clip or have a rose falling down the screen.
On the otherhand how do I add a picture pasted into the clip, like pasting myself standing in the crowd or my photo appearing/showing on the stage big screen on the video clip.
I would also please like to know how I can take a scene out of a dvd movie and incorporate that part into my video project.All the above also with option of added text.
I am using pinacle studio 9+ for editing purposes & would appreciate it extremely if you guy's can help me.

P.S Sorry all,I have mistakenly selected a poll-promise to behave better in future.
 

A:Video clip editing/altering

Every NLE has specific ways to acheive your goals. I use Vegas video and this is how I would do it.

1. Create second track with image above video---play with compositing so that the image is seen to blend--for the rose falling down the screen--create the rose in photoshop , bring it in with a transparent background--set it on its own video track---then key frame the falling motion.

2. It's illegal to "take a scene from a DVD movie" and incorporate that into your video project--unless of coures you want to pay a fortune to the movie company--there is software that will do this but--as I said--its illegal.
 

https://forums.techguy.org/threads/video-clip-editing-altering.293559/
Relevancy 55.04%

Originally, i took the video clip with my Samsung Galaxy phone and the clip saved to the phone gallery sitting the correct way up. When i transferred the clip to my computer through usb utilities it is on it`s side (see attachment). I already converted the mp4 to wmv but that wasn`t suitable for windows movie maker, so i converted it to avi with Prism and that rotated it also., but the audio didn`t work. Any clues please?
 

A:No audio on converted video clip

terrace said:


Originally, i took the video clip with my Samsung Galaxy phone and the clip saved to the phone gallery sitting the correct way up. When i transferred the clip to my computer through usb utilities it is on it`s side (see attachment). I already converted the mp4 to wmv but that wasn`t suitable for windows movie maker, so i converted it to avi with Prism and that rotated it also., but the audio didn`t work. Any clues please?Click to expand...

Thank You, i found "Online Convert.com" and it worked great with video and sound.
 

https://forums.techguy.org/threads/no-audio-on-converted-video-clip.1111170/
Relevancy 55.04%

hey guys, im looking for a place to host my video clips for free? There MOV files. Also, i have a program that converts MOV files to AVI, but when i play it theres no sound?
 

https://forums.techguy.org/threads/free-video-clip-hosting.271084/
Relevancy 54.18%

Hi,

I recently upgraded to the MS 2007 Enterprise suite on our media computer, and having trouble playing video in PowerPoint. I insert my movie via Insert > Movie > Movie From File. I found out that if I right-click and Preview the movie, it will play fine in my slide, however when running the slide show it will play only audio.

Notes:
It will play audio only either when asking it to start automatically or on click.
It is listed as MS Compatible files (WMV).
The movie is located on the PC locally in the same folder as the PPT.
The movie plays fine in Windows Media Player.
I've read through "Compatible multimedia file formats" and "My movie doesn't play" articles on MS website regarding version 2007.
I've installed the "Windows Essentials Media Codec Pack" from Download.com
Please advise, any help is greatly appreciated!

J

A:Unable to present video clip PPT 2007

I believe that there is a limit on the size of that file, so super large files would not work.
Also, I would convert video into another format supported by MS Office 2007 like MPEG or ASF.

http://www.sevenforums.com/microsoft-office/155154-unable-present-video-clip-ppt-2007-a.html
Relevancy 54.18%

Is there a free download that will enable my 5 year old Dell to correct the problem I have with playing a .MOV file.. Have no problem with usual videos.Error message tells me that "player does not support the codec that was used to compress the file"......am I getting too old for the computer science of today?


Oneoldman...... very! .
 

Relevancy 54.18%

Hey guys. I like to embed music video clips on my blog. In the past I have used URL Snooper to find hidden urls of video clips. But it didn't seem to work for this clip from the BET website. So I'm looking for something to do that. I'm also willing to download the clip but I don't think most video downloaders will download this clip. I use a pretty good downloader already and it doesn't work for this clip. If you have something, I have included the link. Try it on this clip and if it works, let me know.http://www.bet.com/onblast/?chan=1&id=...=13&itype=v

http://www.bleepingcomputer.com/forums/t/129234/looking-for-another-program-to-find-hidden-url-of-video-clip/
Relevancy 54.18%

Hi...I have downloaded some movies and are attempting to watch them. Some work fine...while others don't. I use media player and it tells me that it doesn't support the file or codec. Then if i try again.. it tells me it can't play a .AVI file. Can this be fixed?
 

A:can't play "video clip (.AVI) movie...why?

even though it is an avi file it might be a divx or other compressed avi file, and WMP does not have the codec to play it.

Yes there is a fix, download this codec pack and install it

http://www.majorgeeks.com/downloadget.php?id=5326&file=9&evp=09a6f068a43e764b4db06bb3c12adfa5

Now the movies will play.
 

https://forums.techguy.org/threads/cant-play-video-clip-avi-movie-why.866289/
Relevancy 54.18%

Hi there Sorry in advance if I have posted this thread Video File a Size When Editing Clip in the wrong section it is not clear to me where precisely I should put it if anywhere please advise anyway I do a lot of video clips on my phone Occasionally I might make the clip too long and so need to cut the film down by for instance shopping the last five seconds off it To do this I first convert the file from GP to AVI and then use Windows Movie Maker to cut it down to size Unfortunately I find that by the time I have gone through this process the file has reduced in size by a vast amount reducing the File Size When Editing a Video Clip visual and audio quality substantially This basically means that at the moment I have to either do a perfect take every time I File Size When Editing a Video Clip film something which of course is not always possible edit the film but be left with a reduced visual and audio quality which is really poor or leave my flawed masterpiece as it is Not particularly appealing Is there anyway of being able to edit my video clip without reducing the quality Yours really hopefully Richard Milner nbsp

Relevancy 54.18%

Hi guys

I was wondering if anyone can help me with this problem , usually when it happened in the past a simple re boot solved this issue , I have tried system restore and ran Avast , malwarebytes and super anti spyware but nothing has helped , any input would be greatly appreciated

Cheers
 

Relevancy 54.18%

I have Win with integrated graphics AMD All has been well until of center Vertical video in line clip a I recently Vertical line in center of a video clip have noticed that on some sites viewing video clips I see a thin red blk line right in the center of it not my entire screen of the monitor I tried to see if I get the same line while viewing video on youtube and i have not I went to my other browser AOL other than Firefox and anyone familiar with AOL you almost immediately are Vertical line in center of a video clip shown a video after logging in They too showed that line so I suspect its not a browser problem Recently I recalled got a message nbsp to update my Radeon graphics and something called Raptr So i did so Now since noticing that vertical line I removed the Raptr update not really knowing if that is the cause but regardless I still get that pesty line on some video clips Any suggestions on what causes this and how to get rid of it

A:Vertical line in center of a video clip

Try the solutions on this pagehttps://forums.adobe.com/thread/665625?start=0&tstart=0

http://www.computerhope.com/forum/index.php/topic,155670.0.html
Relevancy 54.18%

Hi,
how can I share with or send to somebody 224mb video clip.

Yahoo, GMail etc allow very little.

thanx ............nick
 

Relevancy 54.18%

i cannot play a video clip with no media players it has a .avi file on the end.can anyone help please
 

Relevancy 54.18%

Well my good primary computer broke down recently, and I want to remove my old video card from it and put it in my other computer so I can run some games still on it. But it's been awhile since I installed it into my broken computer, and I can't really tell which one it is. It's some sort of Nvida Ge force im pretty sure, I think it's the one in the AGP slot but im not really sure, and if it is I have no idea how to remove the agp clip or whatever it is. Any help would be appreciated thanks.
 

A:Need help switching video cards, and undoing AGP clip

The graphics card will be in the agp slot which at the top and is brown in colour.
There is a release clip at the right hand side which is held in place by a retaining clip, move this to one side then press down the release clip, this should push the card out.
 

https://forums.techguy.org/threads/need-help-switching-video-cards-and-undoing-agp-clip.647256/
Relevancy 54.18%

Hi there Sorry in advance if I have posted this thread in the wrong section it is not clear to me where precisely I should put it if anywhere please advise anyway when editing a video size clip File I do a lot of video clips on my phone Occasionally I might make the clip too long and so need to cut the film down by for instance shopping the last five seconds off it To do this I first convert the file from GP to AVI and then use Windows Movie Maker to cut it down to size Unfortunately I find that by the time I have gone through this process the file has File size when editing a video clip reduced in size by a vast amount reducing the visual and audio quality substantially This basically means that at the moment I have to either do a perfect take every time I film something which of course is not always possible edit the film but be left with a reduced visual and audio quality which is really poor or leave my flawed masterpiece as it is Not particularly appealing Is there anyway of being able to edit my video clip without reducing File size when editing a video clip the quality Yours really hopefully Richard Milner nbsp

Relevancy 54.18%

I have a starting page that has a wav file (i may swap this for a video clip) that is from one of my tables. Can this wav file play automically when the starting page is open. Im using 2000 format ms access. Or maybe there is a better way to get a video clip to play when the starting page is opened? Any help would be great!
 

https://forums.techguy.org/threads/start-up-wav-sound-or-video-clip-on-access.303216/
Relevancy 54.18%

Ok i have some computer knowledge and i can google with the best of them but I haven t found a complete fix to my problem here we go got video from this last waterfowl season on my old Toshiba satellite which was running windows home ed i was able to take that video MOD format and put it straight onto my computer into a folder and i would have a thumbnail of maybe the beginning of that video That computer s Hard drive crashed so Video .MOD Not Thumbnails Solved: Showing i bought a smaller Toshiba like T or something without a disc drive which also has windows home and I am able to get the thumbnails on that coomputer also however i bought this Dell Optiplex GX which has Solved: .MOD Video Thumbnails Not Showing Windows XP on it I bought it because it would be a better video editing computer than some small laptop This computer has good stats but alas i went to put my video on and i opened my flash drive and I have photoed thumbnails now when i first started this i had the factory Windows Media Player no thumbnails with it then upgraded to media player still no thumbnails all it has is the WMP icon and MPEG if i need i can take a screen photo and show you so i ve spent the last couple hours googling and found what seemed to be a solution by downloading this codec which a few people said fixed their problem Stinkys MPEG- Codec Installer I download and Solved: .MOD Video Thumbnails Not Showing ran this now it wasn t a complete failure because one of the sub-folders inside the main folder finally came up as the thumbnail and the videos inside that folder came up as thumbnails but i still have over videos that aren t they again are MOD i have already been told that renaming them won Solved: .MOD Video Thumbnails Not Showing t work Yes i do know that they are actually mped files but is there something out there that will work so that ALL my videos have a corresponding Thumbnail so that i don t have to go through each one and figure out what it is when i want to edit video Thanks for any advice nbsp

Relevancy 53.75%

Hi,

I am trying to burn an mpeg2 file to a blank dvd. The correct file has been copied, and is now 'waiting to burn to disc'...however when I click the share tab, and then click 'Burn to Disc', nothing happens. No msg pops up and no action is happening. It is a 16x dvd. I used to do this in Windows 7 and never had a problem. Thanks for any help anyone can provide!
 

A:Solved: Trouble burning mpeg2 file to dvd in Windows 8

Depending on if you have Windows Media centre installed, some computers with 8 pre installed especially if 8 professional had the free Windows media Centre

If not open Windows Media player, bring your file to there and then after inserting the DVD click burn
on the right

I am honestly not sure if it will work, try formatting the DVD before you try the burn

The reason I say I am not sure is that I have a triple boot with 8 pro, 7 pro and xp, but I have burnt dvd`s on 8 no problem, with no additional burning software, but not mpeg files

I am just about to sign off if that does not work
See this
http://www.hanselman.com/blog/HowToCreateADVDOnWindows8EvenThoughWindowsDVDMakerIsGoneDVDStyler.aspx

NOTE PLEASE the caution re the OPT out required for the toolbar and home page change

I have just checked as well and I do not think MPEG2 will play on 8 in WMP let alone burn without added software

Good luck
signing off

Would you also kindly reply to your other topic when you get chance
http://forums.techguy.org/windows-8/1087735-boot-error-windows-8-a.html
 

https://forums.techguy.org/threads/solved-trouble-burning-mpeg2-file-to-dvd-in-windows-8.1089249/
Relevancy 53.75%

Hi.

I made a nature video clip (birds) under spontaneous and quite unfavorable conditions - against the light source. Now I am trying to find out, if there are ways to enhance the existing video clip. In brief, the sun in the upper middle of the video is bright, and the surrounding nature (a tropical forest) is nearly black.

What software, which filters, or what technique can enhance the dark areas of the video clip?
 

https://forums.techguy.org/threads/video-editing-adjusting-clip-with-opposite-light.896207/
Relevancy 53.75%

I use outlook 2002 from Office XP Suite. My OS is windows xp home.

When I send an email with a video clip attached, Outlook sends out scads of repeated emails, one after another. Someone I send the clip to might receive 15-20 copies. Yesterday my father got about 60 (!), resulting in the trashing of his email inbox. This only happens with video clip attachments, nothing else.

Virus scans haven't turned up anything...any ideas? Things to check? As I wait responses, I will run another virus scan, just to be sure...
 

Relevancy 53.75%

i am having this verry anoying issue where when i click Anything / applications etc
that is minimized, its impossible to make them maximise.

i did google searchs for help regarding this and all i could find was different task bar issues and not mine..

i am getting really pissed off of this i never had this happened with any other windows

[i am using windows 7 64bit btw]

i have recorded a little clip of me trying to maximise msn messenger windows
to make all of you see for your self whats happening

i know the video quality is shitty but.. i made it the lowest rez to make it a small file to upload quiker

heres the link:

task.mp4 video by harmony1981 - Photobucket

i really hope someone had this problem and got it fixed because am verry tired of this

i thank you all verry much for the futur reply's ill get

best
regards

Jeff

A:Taskbar application issue (includes a video clip)

Welcome to SF!

If you haven't done so already, I suggest a system restore to get to a point before the troubles began.

A repair install may also do the trick, if no-go with the system restore.

http://www.sevenforums.com/bsod-help-support/112262-taskbar-application-issue-includes-video-clip.html
Relevancy 53.75%

I am using Vista Home Pro it's been working fine for more than 1 year, but now whenever I try and play video clips or dvd's, before I can open them, windows closes and re-opens approx 10 seconds later. I have tried using various players including VLC media player and Windows Media Player but with the same result. Any ideas?

A:Windows ckoses every time i try and open a video clip

what are you running
video card
cpu
m/board
ram
power supply
brand
wattage

check the listings in the bios for voltages and tempretures and post them

http://www.techsupportforum.com/forums/f217/windows-ckoses-every-time-i-try-and-open-a-video-clip-308961.html
Relevancy 53.75%

When I try to play video clips downloaded from my Nokia N76 cell phone to my laptop, using Windows Media Player, I get an error message that the player can't play .npl files.

What can I do to play these files? Thanks.
 

https://forums.techguy.org/threads/playing-nokia-cell-phone-video-clip.766277/
Relevancy 53.75%

Trying to burn an MPEG and seperately a video clip. I can get picture when I play the burnt cd in my dvd player, but not sound. What am I doing wrong? I am using Nero Burning Rom 6.

A:Burning MPEG or Video Clip, Picture, but no sound?

hi chatter if i were you id get a program called winavi, and use this to convert the MPEG to avi, and then the avi to DVD (VIDEO_TS) and then use DVD shrink to add the VIDEO_TS files and burn them to dvd thats what i do and had no problems.

You could also try this guide

http://www.pcstats.com/articleview.c...id=1635&page=8

http://www.techsupportforum.com/forums/f10/burning-mpeg-or-video-clip-picture-but-no-sound-92566.html
Relevancy 53.75%

Hello folks A quick rundown of my problem I have an HP Pavilion DV showing not Solved: monitor Computer on video model laptop One day it was running really Solved: Computer not showing video on monitor hot and the monitor went to black on me I have had this happen in the past and was able to fix it by re-attaching the monitor cable to the motherboard So I opened up the laptop to do just that and found that the monitor was still hooked up the way it should be Now here s the fun part I went to start up the laptop again and now the computer will not boot It runs on checks the hard drive and then resets itself I can get the laptop to stay powered on Solved: Computer not showing video on monitor by holding down the ESC key while it is booting However there is no signal being sent to the monitor so I have no idea what is going on because I can t see anything I have tried hooking up to an external monitor with no luck So far the hard drive has been to Geek Squad for a data retrieval but they told me they could not back up my hard drive because the hard drive would not boot up on their backup machines I am assuming that when I hold down the ESC key I am getting to the boot screen for the BIOS I have a feeling I could get to the data on the hard drive if I could get Ubuntu to load via a flash drive but my problem still lies in no signal being sent to a monitor Any ideas nbsp

A:Solved: Computer not showing video on monitor

Geek Squad techs are idiots if they tried to boot your hard drive in one of their computers to get your data off. I'm hoping they simply told you the wrong thing.

To recover the data, attach the drive to another computer via an adapter like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16812232002
No booting required for this method and this, or a variation of this, is how its usually done.

As long as the drive is not faulty or encrypted this should work. Just access it though My Computer and use copy and paste to get the files of it.

As for the laptop, it might be a write-off. DV6000's with the the AMD CPU and nVidia chipset experienced massive failures due to a flaw in the nVidia chipset and poor HP quality for high rate of failure and some of the other problems with the units. HP had a write up on their website about the chipset issue, but shortly after the "Extended Service" ended they pulled the write-up...

However a Google search still results in plenty of info: http://www.google.ca/search?sourceid=chrome&ie=UTF-8&q=dv6000+motherboard+failure
 

https://forums.techguy.org/threads/solved-computer-not-showing-video-on-monitor.1008027/
Relevancy 53.75%

Hey all- I have a user with a Gateway system running Windows XP We are putting a video card into the system PCI in order for her to utilize dual monitors I installed Second up card with monitor Solved: not video new showing the card and it is being recogninzed properly in the system however when I go to quot Extend the Windows Desktop quot to the second screen it never comes up The Solved: Second monitor not showing up with new video card first monitor works fine The setting is accepted as if it recognizes the monitor it is just the screen never comes up The first monitor is on the original VGA port that came with the computer I have done this configuration in the past on the exact same model of system with the same issue and the problem was generally solved after installing and uninstalling the card several times Is there something I can try to get this second monitor recognized without having to uninstall and reinstall again The card is an ATI Radeon PCI The two monitors are identical Dell Flat Screens I tried switching the monitors around and both work fine as well I appreciate it nbsp

Relevancy 53.32%

I have Googled this but only see programs that will convert FLV to mpeg2 or other mpeg file formats. Anyone now of a product that can convert my MPEG2 files to FLV?
 

A:convert MPEG2 video files to FLV files?

Try Super
I've been using it to batch convert mpeg2 to wmv .. Haven't tried flv to mpeg2
 

https://forums.techguy.org/threads/convert-mpeg2-video-files-to-flv-files.959861/
Relevancy 53.32%

The icons on the start menu and login screen are missing. how do i solve this?

A:Power Icon and Log Off Icon not showing

on the top right hand corner where the icons should be, there are only rectangular boxes

http://www.eightforums.com/performance-maintenance/50559-power-icon-log-off-icon-not-showing.html
Relevancy 53.32%

I had 2 cards in this build working fine then all of sudden windows stopped booting after splash up...long story short when I removed the second card that was being crossfired too in slot 4 and left the 1st card in slot one windows loads just fine. Now having taken that card out and already sent it back to gigabyte for an RMA(ASSuming it was the issue) I just had a wicked bad BSOD watching a simple flash video clip....

Log attached....

A:BSOD watching video clip... Gigabyte ATI R9 280x Catalyst 14.10

I updated catalyst and bam...it almost instantly BSOD after Install again.... IS this the Video card causing this?.... did I send back the wrong one?... Is it the Dominator ram I have running at 2133 using the bios settings?.. Ever since I upgraded it seems like Ive had issues... Now the Catalyst center is kaput?.... Please help me before I lose my mind!

http://www.sevenforums.com/bsod-help-support/345575-bsod-watching-video-clip-gigabyte-ati-r9-280x-catalyst-14-10-a.html
Relevancy 53.32%

I D/L real player11 after seeing the post titled -How do I Save Clips of News from the Internet.- Now I can download my videos without any problems. I am using dial-up and XP. However when I play the clips only about the first sentence and half play over and over again.
The videos that do this are from www.beyondbiofeedback.com and use flash player. I also downloaded a video off of youtube and it plays perfectly.
 

A:Real Player Plays only TINY part of Video Clip

Both( the one from youtube and the one from beyondbiofeedback.com) of these video clips are in the flash format.
 

https://forums.techguy.org/threads/real-player-plays-only-tiny-part-of-video-clip.685721/
Relevancy 53.32%

Hello,When I am trying to play a downloaded torrent movie, the windows media player is opening and then only the sound comes with a green square. No pictures appear in the square. Just a plain green square. Under properties for the file it says, "Video Clip".I updated the graphics drivers and also have the latest java updates. The funniest part is that in the same course of download there are other files which are playing perfectly. It's just a couple of them that are not playing.Request you to please let me know how to overcome this trouble.Regards.

A:Green square box when trying to play downloaded Video Clip file

a downloaded torrent movieIt could be a number of things,incomplete download, corrupt, or malware

http://www.bleepingcomputer.com/forums/t/196158/green-square-box-when-trying-to-play-downloaded-video-clip-file/