Does anyone know of a program that can track where data is going that leaves the modem. The reason that I ask is that my modem is sending and recieving data even when I'm not doing anything and it's only started doing this just yesterday and I'm a bit worried.
Thanks in advance,
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
I've said time and time again that solid state drives are the future but the truth of the matter is, traditional spinning disks still have a place inside a modern PC as a storage / backup drive. The question then becomes,...
Well I'm glad I have never bought a Seagate HD. I usually buy Western Digital, except my SSD is Samsung.
My friend's USB flash memory has data (its drive shows that there is data in it) but when I double click on it to open it and see the contents, it doesn't show any folders and files! I did the following works:
1- I scanned it by my updated kaspersky AV. but no threat found
2- Scanned by windows defender tool. same result!
3- scanned by malwarebytes anti-malware. same.
4- cmd (run as administrator) -> go to its drive (e.g., H:, when H is my flash drive) and typing the attarib -s -h *.* /s /d command. It could not to show the data.
All my attempts faced failure till now.
Can anyone help me please?
Go to cmd (run as administrator) -> go to its drive (e.g. H: where H is my flash drive) and type the attrib -s -h *.* /s /d
Now flash will show the data.
Your attrib spelling was wrong correct them
This laptop will not save documents or files to the hard drive. They are there when initially saved, but disappear when the system is next switched on.
Anyone help me pls...
You need to say whether you are new to computers or not and which Windows operating system you have. I remember when we first got a computer many years ago the wife thought that I'd deleted her work. In fact we didn't know whereabouts it was saved and couldn't find our way around. If you are a beginner using Windows 7 try clicking on the Start button and then Documents in the menu that opens to the right. By default that's where things are saved but you can use the Save As option and choose a different location.
Windows 7 doesn't recognize my SSD drive. When I go to disk management, it shows a message to initialize it (image no.1) but when I press OK to do that, one another message appears and says: Data error cyclic redundancy check (image no.2). My computer windows doesn't show that drive and also when I went to cmd->diskpart, again it didn't show that disk to use of chkdsk /f command. How to solve the problem please?
I could to revive that disk in diskpart using PartedMagic in boot. I've uploaded a new image from that. The remained problem here is that I can't delete it there.
My bother had deleted my laptop partition files and folders when attempting to extend my C partition. All my stored partition movies were lost and could not be found in Recycle Bin. Do you know where these partition videos are? I really want to view these videos again. What can I do to rescue them? Thank you for any advice!
Sorry to hear you are experiencing such an issue.
Your data is stilll there somewhere as long as you don't overwrite it. If you save new data, it would rewrite your previous files.
I did some research for you and I found a threat that you might find helpful:
I really hope this works for you!
One of my hard drives just failed after years of reliable service. A lot of valuable information was lost.
To avoid this in the future, it would be helpful to know just how old a drive is to know when it's time to be replaced.
Is there a program that can tell me when I drive was manufactured?
Drive age doesn't really have much to do with 'drive failures'. Time in service increases the risk, but it's not a defining factor either.
The HDD should have a sticker on it showing date of manufacture. I don't know of a program.
I have a sony SD Card 16gb class 4 card. I did use the card for almost 3 months, when I tried to use it now, I am not able to access the card,
I tried recovery softwares like recova etc to recover the file, but I was not able to recover even a single byte.
I have many importants files in the CARD, PLEASE HELP ME...,.
I think >>this thread<< could help you out . He seems to have the same problem.
Is there any difference between software which are used for recovering data from HDD or flash memory drives and SSD? For example, can we use of the apps used for HDD to recover data from SSD too?
I do not see why the HDD programs shouldn't work for SSDs. Maybe @jobeard can weigh in if I am wrong. I would check out this article.
Recently sound has not been coming through my speakers, so I tried to plug in headphones and headset but no further luck. I then went into control panel then sound and check the settings on my playback and nothing was touched or muted etc. I then went to the Speakers and Headphones in sound right clicked and pressed test and it said "The device is being used by another application. Please close any devices that are playing through this device." but no other applications that I could find that would be using it. My prediction is that having no internet protection for a while and downloading off the internet has caused a virus to cause my audio to become mute, if this is so how would I be able to find this application causing it. AVG isnt picking it up.
Broni, from the Virus and Malware Removal forum doesn't think it is malware related.
Whenever I connect my Hard-disk to laptop, my laptop slows down and am not able to open the hard-disk folder. Am not able to access my data in it. As soon as I disconnect the Hard disk, laptop gets back to normal. Can anyone please help with the issue ?
If it's physically damaged, nothing you can do it in your own. You need to consult it to a professional unless you have knowledge and experience on some DIY hard drive repair.
Okay not really very good at this but my laptop stopped working so I took hd out and connected it to anotherlaptop through usb lead it appears in my disk management (although it shows up grey instead of black or blue if that makes sense to anyone) but it wont show in my computer I have a load od family photos on this drive and would really love some help and will send out good karma to all who try to help me many thanks in advance
Hi techmichellenot. When you say it stopped working,is there anything on the screen when you power up, or any indication that the system passed it's POST procedure (Power On Self Test), usually indicated by a beep before Windows itself tries to boot up?. Any error messages seen?. Sounds like you put the drive in an external case that can connect via USB. If there is indeed a problem with the disk drive and it's not a physical problem with the drive (maybe a corrupted Windows boot file,etc),your system may have a Recovery procedure that will reinstall your OS without erasing your data files (called a non destructive OS reinstall) as opposed to a destructive which erases everything and reinstalls the OS. I would check your documentation to see if your laptop has such a procedure.
My internal HDD failed due to a sudden power outage. I can hear beeping sounds like the motor is trying to spin the drive up and failing to do so. This drive contains all my important data ( documents, photos and videos), I'm thinking of taking it to a data recovery center, How much would it cost me for a data recovery service? I've been recommended to WeRecoverData data recovery labs by an IT person, Anyone have experience with them? Any help advice? Thanks in advance.
Likely thousands. Hopefully in the future you will make backups of important data.
If it was killed by the power outage, you can probably fix it yourself by purchasing the exact same drive on ebay or wherever and swap the PCB.
I have downloaded a program called Anomos, it tells me please forward your ports so the program can work, 5061. Ok so I go into my century link modem and it wants a ip address to forward the ports what ip address do I enter?
The LAN address of the system you want the data to go to.
It must always be the same address, so you need to make it so using
Address Reservation on the router OR a static address on the target machine (not recommended for laptops).
My house was hit by lightening a few years ago and it fried my computers- so I very quickly went out and bought a WD g mybook external hard drive which I have everything stored on Please keep in mind I am not an expert by any means and do not have a lot of experience with these types of things other than simple computer installs ect but I would not consider myself a beginner I am just desperate to recover my files without having to pay someone to try to do it for me A few weeks ago my computer simply me a WD MyBook off Help my get data stopped recognizing it was there When I would power it off or on or reset it it would attempt to load but the blue light would constantly blink First think I did was try a new USB cord which changed nothing- I also have tried it on three different computers- Nothing I read about taking the hard drive out of the casing yes I realize it voids any warranty but at this point I am more concerned with my data than getting any sort of a replacement so I carefully removed it- I put it in my computer hooked up to a SATA drive- It did not show up in Help me get my data off a WD MyBook Disk management or under my computer I went into BIOS and did see a removable disk but if I set it as boot priority obviously it would not work- I do not know if there was something else I should have done to get it to work in BIOS I then hooked it into another computer where I have a second hard drive- Took mine out and put this one in its place since I know that I am able to access my second hard drive on this computer- It simply didnt show up I then took it to Best Buy- And they informed it that the hard drive was trash- That her machine would not even get it to power up at all that data recovery was not even possible and I should throw the hard drive away and start over I took it to another computer store who told me they could send it out and attempt data recovery at the tune of I brought the drive home- Hooked back up the USB board and plugged it back in as if it was again a external- It turned on- light begin to blink as before- but I can also hear and feel it spinning- I am not hearing any strange sounds nothing sound loose inside it just sounds like it spins for a few minutes then stops- and that light constantly blinks I then read online that someone mentioned that with these they often have an encryption built in to the usb connection which makes it so the hard drive will not power up as an internal hard drive or without that usb board on it Anyone know if there is truth to that I am desperate to get this to function so I can get my files off of it- Please if anyone has any ideas what I can do please share Thank you in advance- Brooke nbsp
I don't know anything that'll help you, sorry.
But here's your step#1 problem: My house was hit by lightening a few years ago and it fried my computers- so I very quickly went out and bought a WD 500g mybook external hard drive which I have everything stored on.
If your computers get fried, an external HDD will also probably get fried. Remember, having a backup means having a minimum of three copies (original, 'backup', long-term storage backup).
I have a laptop with the Realtek high definition audio and Dolby home theater installed. After the latest win8.1 update the Realtek program has stopped forwarding the sound through the Dolby program (which it managed to do perfectly before the upgrade). I tried using Viper4Windows too but that didn't work eighter. Is there an option anywhere that will allow me to fix this?
Are there any yellow (!) in the device manager?
Friends and neighbors, last March I had such a system crash that, due to the number of bad HD sectors, I had to replace the HD. The HD with my various tools was not even detectable. My system ran Windows 7 64-Bit and IE9. The computer is an MSI notebook. Anyway, while doing some searching to diagnose another problem, I registered for this site after seeing Puppy Linux, whose page I saved to my Favorites. Having kept the old HD, in case I could salvage any data, is it possible for me to use Puppy Linux on that old HD? Thanks. Your answers will be a great help.
Hey Louis. We don't know how bad the drive is, but you can try putting the drive in a USB enclosure, formatting it, then install Puppy Linux on it, since apparently Puppy Linux doesn't require a lot of space and can also be run from RAM according to the Wikipedia link.
So... like most of world my family lives online. Having found that ISP pricing in Alaska is horrendously expensive, I want to find a solution that I can create 4 SSIDs, one for each of my three kids (ages 12, 14, &16) and one for me and my wife, and place a data cap on each SSID so that I can't be hit up with the bills that come with overages. I figure with individual SSIDs they can use what ever device they have with out having to detirmine MAC addresses or IPs used or any of that other stuff.
I would like to have just one router be able to accomplish this. I have an older router, an Apple Time Capsule I bought about 6 years ago, but as I don't use Macintosh computers any more, I would be happy to buy a new router and get it set up to manage this dilema.
Any Advice or suggestions will be greatly appreciated.
You saved an old hard drive (or three) from previous computers and now you?d like to get at the data on them. Is there an easy way to access the data without cracking open your current computer and mounting the hard drives inside?
very good. I was trying to explain this to someone. Now I think I will just send then the Web Page.
I burned 1 GB of info in a DVD-R disc. Computer could read it perfectly and said 1 GB was recorded and 3 GB still free available for more data.
Next day I tried to add more data, 0.5 GB in a folder. All was OK, I dragged folder to DVD and PC said it was doing the job, after 2 minutes said folder was ready to be burnt. But the previous folders did not appear. I quit burning and tried to check the information on DVD. right- clicked properties and PC says it has 1 GB of data burnt and 3 GB available. But if I try to read the information I had burnt before, nothing, no files or folders.
May I still recover the 1.0 GB recorded first day? HOw?
When burning multiple sessions to a DVD-R disk, if the sessions are not left open or closed improperly, then it can "lose" data or make the entire disk worthless. As for recovering data from a DVD-R or any optical disk, for all intents & purposes it's a lost cause, it's not impossible, but it would cost out the wazoo and the likelihood of recovery is slim.
As cheap as DVD-R disks are, don't burn multiple sessions, just burn once and be done with it.
Hope this helps, take care!
This could sound confusing but please bare with me So I had a TB HD Sata with win I took it out and used a new SSD which I put Win on Then I hooked up a TB HD Sata as Storage Simple so far right Well now I want to get my documents Bookmarks etc off the quot OLD quot drive I figured simple like with IDE HD s but no When I hook it up as the only drive I get this message EFI Shell Version Current get do How main off Hard Data My Drive? I "former" running mode Map Cannot find required map name Press Esc in seconds to skip startup nsh any other key to continue shell id gt When I hook it up as the second How do I get Data off My "former" main Hard Drive? drive After the SSD the drive doesn t show up I tried to put it in another PC by itself but it said something like it wasn t the disk for that PC Someone please tell me there is an easy way around this I googled a bunch of stuff and tried a few things with no luck I m hoping I m just frustrated and missing the obvious Thanks for any help nbsp
How about unplugging ssd plug old drive back in then transfer stuff to ur 2tb once done unplug old and replug ssd ?
I was curious if anyone who has Spotify Premium and uses it regularly on their smartphone could tell me approximately how much their monthly data usage is. I was planning on getting 4GB and was curious if this would be enough with using Spotify.
I have an old laptop HDD (I think it's out of a Dell Latitudes laptop) and I need to access data off of it. I have an SATA/IDE to USB adaptor that I've used successfully several times in this type of situation. However, this particular drive won't respond when I hook it up. It just doesn't spin. I took it to a computer shop to see if they could help me, but they weren't able to get it going.
My thinking is, if I was a bad guy and the F.B.I. confiscated this drive, how would they get info off of it? There must be a way. Any thoughts?
Buy the exact same drive on ebay. If the drive isn't spinning up it is a board issue (or a HORRIBLE spinny failure). So, get the exact same drive from ebay or somewhere else, and swap out the PCB. Problem solved.
I have lost my important and personal data on my SD card. As I tried to connect it to my Mac, it was asked to format, and I pressed it. So, now, all the data is lost. But, I know the lost data after formatting is not actually erased. It is still there and becomes inaccessible. Therefore, could you help me get it back? Any idea could be appreciated. Thank you!
Hmm as far as my knowledge goes, you cannot, I think mostly every website that offers to 'recover' any type of format is a virus in waiting, as for software goes you may wish for someone with more knowledge, the only safe way I can think of is expensive.
Data recovery is not always 100% so take into account you may pay and not get anything in return,
http://stellardatarecovery.co.uk/ Unsure they do SD or not, but it's more likely best to find one yourself so I cannot be held liable!
Hope this helped!
Objects available : Laptop with windows vista(32 Bit Home Basic SP 2)
: Tata Docomo internet data card
PROBLEM : I connect to internet via data card on my laptop. I want to share this internet connection on my iPAD which I am not able to do.
After connection to internet via data card on laptop, I created a wireless ad hoc connection. Which creating ad hoc connection I do not get the option of " SHARE INTERNET".
On iPAD this network is detected and the iPAD connects to this network.
On Laptop it is then shown this way :-
MY LAPTOP -------------------- MULTIPLE NETWORKS ----------------- INTERNET
But still the internet on iPAD doesnt get activated.
Plz help. ...
GOT THE SOLUTION.!!!
After extensive search on the internet, I got 1 solution. Unchecking the option "ALLOW SHARE OF CONNECTION" in properties of the data card internet. Then setting up of an ad hoc connection, will get the option "SHARE INTERNET CONNECTION".
I have a WD External SATA 1TB Hard Drive that has ~700 GB of family memories/movies/documents/etc and it is now connected to Windows 8.
The original housing it came in was unsurprisingly cheap and the connection piece broke. I re soldered it on and the connection was made but the drive threw nothing but errors. I figured I messed it up so bought an external case and assembled it. Now however, the drive does not show up under my computer but does in Disk Management.
Disk Management claims that the HD has the full TB unallocated and not initialized. I don't want to initialize it because I don't want to lose the information I have on it. Any idea on how to get this working?
I have downloaded and used the Data Lifeguard available at WD and the External has passed the Quick Test so drivers are all there and working.
Umm, I would try first connecting it back to whatever PC version you were using before (Assuming Windows 7) and seeing whats up.
If that does not work, try messing with the connection that you re-soldered and making sure its all done fully correctly, something may have gotten crossed.
Up until days ago my laptop was working fine Then all of a sudden while transferring files to external hard drive it just froze and that was pretty much the end of it It got to the point where this would keep happening and I know help recovery Need data with it s not good but I ended up just forcing the computer to shut down by pressing the power Need help with data recovery button then the computer wouldn t even boot up I ended up just buying a new laptop btw the external hard drive from my old laptop works fine I bought a hard drive enclosure for the old hard drive from my old laptop to recover some data the hard drive shows up as LOCAL DISK on the new computer but it freezes up when I try to access it everything else on the new computer working fine and can t even eject it Whenever I try to do something with the old hard drive it just takes a long time or there s no response or it freezes It even prevents my new computer from booting up or shutting down Is it hopeless to retrieve some data from this drive or is it a lost cause Really appreciate any help Thanks nbsp
The drive may have some sort of malware on it. Download Malwarebytes Anti-Malware, and run a custom scan on the drive. If it comes up clear, it may have errors. We will proceed from there after you have completed the scan. Best of luck.
Hello Today my WD Raptor decided to die all of a sudden while using my computer it just froze up blue screen on me and reboot then keeps looping I do regular backups so I have quot most quot of my data on my external drives but this happened so suddenly that I have some recent excel files and pictures that are not on my last backup and I would really like to recover those files I run DFT and result was some sector logical failure I remove the drive installed on another computer and I can see the drive but every time I double click on it I got the message quot You need to format the disk in drive D before you can use died, data Raptor need recovery WD it quot and sometimes when I click on the drive I got quot D is not accessible Data error cyclic redundancy check quot Disk management sees the drive as quot Active Primary Partition quot but still can t open it from there I haven t format it yet but I wonder if there is a way to access it somehow to retrieve the data or the only way is WD Raptor died, need data recovery to format it to access it and then use some software to recover the files Suggestions opinions what do you guys think what options do I have Thanks in advance for all the input nbsphttp://www.techspot.com/community/topics/wd-raptor-died-need-data-recovery.191410/
Hi I have a TOSHIBA GB I had much important project data on it and I did the most terrible mistake of my life not to back it up when all my other HDD datas are double if not triple backedup stick data recovery Memory It was working fine till late night till in the morning when I plugged it on my computer it told me it Memory stick data recovery sholud be formatted first The drive letter doesn t show up on My computer nor in My devices I tried using the EaseUS Data Recovery sample version but it too cant detect the drive I went through the flash drive data recovery procedure in this forum but I do not understand that if I format the drive the data will be gone Again I do not have a backup to copy it again I dont want to recover using the drive but just the data Please please please help someone if such a thing is possible Its almost months of my hard work An update Now its appearing as Removable disk on my computer and if I click on it its saying insert disk into drive F If I try exploring it the format option is appearing Please please help I need the data nbsp
Greetings guys, hope you are doing fine.
I'm using ExpatShield to play SCII ( long story ). Anyway, I tried today to download an arcade map from within SC ( 3 MB ) but it was extremly slow. I alt-tab and opened Resource Monitor and here is what I found >> http://imageshack.us/photo/my-images/33/expatbug.jpg/
As you can see ExpatShield is downloading at near 70 KB/sec but is not passing data to the original application ( SC in this case ). It actually downloaded more than 70 MB and the map was still at 2%. Moreover, when I exited SCII, Expat kept downloading.
It usually works fine except for this case.
Thanks in advance.
I've got a home network with two wireless access points (routers with WiFi). One router is the main unit for Verizon FIOS. this is the DHCP server. The other router is upstairs, and performs only to allow an iPod or Kindle to be connected upstairs (have trouble getting a good signal from the main router downstairs). This router has no WAN connection, so is really just a switch with WiFi.
So, I'm starting to get security conscious, and wondering exactly what data on the network is getting out on the WiFi.
Does everything going through the router with the WiFi go out on the radio, or is only data being sent to/from connected WiFi devices available over the air?
Thanks for your help
Without any devices connected, the only thing "going out" is a base signal (ie the rf channel) and the SSID.
When a connection is made, the data traversing the WiFi is dependent upon what specific services are being used by the connected device; eg for a device with a browser, that would include the HTTP request and the subsequent reply.
For security, we activate one of the encryption protocols so that someone nearby with RF tools may see the signals but not be able to 'read' them - - just like SSL protects a browser session.
First post and here is the story I have an old broken XP laptop A friend loaned me his IDE SATA to USB cable so I could get some files off the hard drive I proceeded from computer another one Unable data to get to to connect and download what I wanted o my Acer windows computer I put everything into a folder I can open that folder and read the Docs and Unable to get data from one computer to another look at the pictures no problem I copied the info to an external HDD I tried to download it to my wife s laptop but it is not there I tried to load the same info on to a Cruzer Flash drive and transfer it the same way The folder is empty is what I get when I click on the flash drive letter If I put it back into my computer I can read it If I click properties of the drive it shows the space being used I also tried to put the info onto a laptop at work same thing If I add an unrelated file onto the flash drive it works normally These files are possessed Help I guess you can t edit the title nbsp
It could be because you could have "hide hidden files/folders" checked. Just a guess, good luck.
I have two Western Digital Tb HD making data Problem copy connection to adhoc HD s which I use for archiving and are carbon copies of Problem making adhoc HD connection to copy data each other and my third installed OS HD They are both external to my computer in fact one came as part of a WD My Book Previously I had my Asus P Q Deluxe fitted and I could just plug the two HD s into the PSU with a spare power cable and connect them to the mobo with a couple of Sata cables and copy any data from the main installed HD or replicate data between them No problem However due to RAM issues I have swapped the mobo out for my Asus P W DH Deluxe I just assumed I could go ahead with my adhoc method of plug and play HD connectivity but after shutting down my desktop wiring in just one archive HD and powering up the computer went a Problem making adhoc HD connection to copy data bit funny All the icons had shifted over to my TV display next to my desktop while my monitor s desktop pic got squashed vertically with vertical letterbox lines left and right pretty much as though I had been messing with the AMD Problem making adhoc HD connection to copy data Catalyst Control Centre Any ideas why plugging in an HD or two into the spare Sata EZ Raid sockets would cause this Why didn t it behave like P Q e g plug amp play style or as if I had simply plugged in the HD via the USB One thing I forgot to check was if the HD showed up in My Computer while the icons and what not were on the TV screen Tom nbsp
Nevermind. I plugged the two archive HD's into the mobo today and all is fine and copying perfectly.
My computer running Windows Ultimate -bit can no longer access my Western Digital Caviar quot Black quot TB hard drive that s connected but I suspect my data to still be in there so I wonder what data recorvery tools people have used and recommend This is one of the additional drives to my operating system C drive It has been formatted as NTFS and been working fine for several months until with recommendations Data format, from drive please lost recovery software a week ago Now it appears as the E drive on Data recovery from drive with lost format, software recommendations please My Computer as originally configured but the volume label is now blank I used to have that named as quot Media quot When I double-click on it to Data recovery from drive with lost format, software recommendations please enter the drive I get the Data recovery from drive with lost format, software recommendations please error message quot E is not accessible The parameter is incorrect quot In Computer Management -- gt Storage -- gt Disk Management the drive appears but it s File System is now indicated as RAW rather than NTFS I have tried using Active Partition Recovery and that successfully lists my drive with the original label name quot Media quot and as NTFS and also lists the folders located at the root of the drive which is why I suspect my data to still be in there and recoverable However when I use this tool to do a full scan of my disk it freezes after scanning MB There are tools out there with varying reliability so whch ones do people here recommend another tool I trired I forget its name was scanning my disk but prediced days to go over the entire TB so that s out of the question I have been told to use a tool that can recover files onto a separate disk rather then try to repair the original disk and risk losing more of the original data Any advice would be greatly appreciated Thanks nbsp
Oh crap. Something like this happened recently to me when I had backed up some data to an USB thumb drive. It worked fine for awhile, then some weeks later, my PC just couldn't read it anymore (kept saying "disk in drive needs to be reformatted/etc"...and the properties for the drive also showed it as RAW format instead of FAT32 like it would have been usually).
I think the issue is drive corruption, which seems to be fairly common with external devices like USB drives, but odd in the case of an internal drive. The remedy for me was to try to access it from a different system, which was easy since being a USB stick I could try it elsewhere easily. If you can use another system to access the drive, preferably a Linux/Ubuntu based one; it is likely your best bet to recoup the data before its lost permanently. An external HDD kit would be ideal, and they are quite cheap also.
Hope this helps!
As well as other specs, like the ms and such. I bought a mouse from China on Ebay for about 8$ new. The specs say its the same as the death adder, but I have my doubts. I am sure its still a good mouse for the price, but Im curious how good is it? I wanna know did they copy paste the death adder specs or did I really get a smoking deal on this mouse?
here is the mouse btw
p.s. the damn dragon light is blinding me while I type, can I turn it off with software?
p.s.s. the middle mouse wheel is slow hmm (compared to my old mouse)
It seems hard to believe that the sensor would be the same.. But I have no ideas on how to actually test.
Okay A data? Can I my recover few months ago I had a major shut down on my previous Laptop it turned to mush it slowly got worse Can I recover my data? and worse and the monitor went blue screened about times an hour and was just overused in fairness I got it second hand and it was already years old but they had it fixed up before giving it to me new pieces inside the computer extra ram and settings etc etc Anyway I ve given up on getting it fixed at this point in time I Can I recover my data? do have a couple things on there saved to the Desktop and other Folders such as Pictures n Such and other things I needed for work I managed to remake most of it and then silly me only had them on a USB I d been using about a month and it stopped working plug it into the computer and Nada the Charger Port is even gone and I can t get it turned on for a minute if I move the laptop even an inch the screen shows sections of rectangles all along it in funky colors until it just comes up black dark black as if the computer s off So here s my question finally is there a way for me to get my files from that computer and hook it up to my new one as like a storage device so I can get my stuff off of it and hopefully not any viruses lt lt quot Oh and as a side question Is there any way to get my files off my USB that just stopped working as I lost about of my work Again I don t need it urgently or anything it would just be nice to have it all back nbsp
If a USB stick stops working, it's pretty much bye-bye. There are of course some things you can do, but I'm not going to bother explaining them as I don't believe it will help you.
As for your laptop hard drive: the question is, is it SATA? This is the power/data connectors on the harddrive.
It could be as simple as pulling out the HDD, and plugging it into another desktop computer. Or, into a USB HDD dock.
I have a Crucial 128GB SSD as my OS/Program drive, and a 750GB WD Black drive which contains all my music/movies/photos etc. My issue is that it goes offline or into like a stand-by mode after a certain period of time. So lets say I go to open itunes, it will take 8-10 seconds for it to access the drive and load up the program with my music. It's definitely going into some stand-by type mode, because I can hear when it goes into it, and when it comes out of it when I open a program or file that happens to be on the HDD. So I wanted to know if there is a way to disable that so my access is instant. Any info appreciated, thank you.
Could it be the "Turn off hard disk after" setting in the Power Options?
When I got a new printer, I went to my laptop and try the find printer thing when I clicked on it the window pop up and then another one that said "The Active Directory Domain Service is currently unavailable." Please someone tell me what and how to fix this
Follow the directions that came with your new printer. Usually you have to first install the driver from the included disc or their website, then at some point you're instructed to plug the printer in with USB cable and power it up. It should then be recognized in Device Manager and show up in Control Panel/Printers, where you can set it to your default printer.
I have two Seagate 7200 hard drives than are no longer recognized by the desktop or by my laptop via a usb/EDI/SATA adapter. These were my backup drives and have all my photos, itunes, and doc files. Rather than speed $1,000 to have the files extracted by a recovery firm I wondered if its possible to remove the storage media from one drive and install it in a new drive box. Say buy a $60 internal drive open it up and remove the disks, take the disks out of the non-working drive and install it in the new internal drive. Is that even possible? Would the circuitry on the new drive even recognize the replacement disks? Would the drives need to be the same GB? Inquiring minds want to know!
I've heard of people buying the exact same drive (needs to be exact so the PCB is the same) and then swapping those out. I've never heard of people removing the platters and putting in a new drive - I think that would be highly risky if not impossible. Try to find a working drive with the same PCB on ebay, then swap the boards.
I have Windows XP SP that would not boot to the desktop on a Normal boot The system has SATA HDD amp SATA DVD-RW partition HDD XP -- Windows lost data problem on Red SATA ports on the Motherboard amp Black SATA port on the mother board I apologize but sadly I do NOT remember if the DVD drive or one of the HDD was in the Black SATA port I m not REALLY sure I Windows XP HDD partition problem -- data lost understand the difference but The system would boot up almost to the desktop so I was able to boot up in Safe Mode Once I could get to the desktop I looked at the System log in Event Viewer amp it showed that the controller was reporting drive errors on Hard Drive NOT the boot drive It was happening so much that it was virtually filling the Event Viewer amp making it Windows XP HDD partition problem -- data lost hard to see anything else in there amp kept the system from being able to boot to the desktop It never made it to where it said Windows was loading my personal settings I have never seen a NON-boot drive keep an XP system from being able to boot up Once I made it to where I could see the Event Viewer messages I shut the system down amp disconnected the quot bad quot drive amp restarted the system It then booted up fine but when I looked at the event Viewer is STILL showed Hard Drive errors I thought that it might be a bad cable so I shut the system down again amp connected the SATA cable that was connect to Hard Drive amp moved exchanged it with the one on Hard Drive amp booted the system I looked in the Event Viewer amp it was STILL showing Hard Drive errors so I opened quot Disk Management quot amp it thought the hard drive that I took out was still in the system At this point it was actually in another room Disk Management showed hard drive errors so I right clicked on the drive that wasn t even IN the system amp chose quot Delete Partition quot amp that made the drive errors stop Remember THAT hard drive was NOT in the system at the time I rebooted the system amp looked in Drive Management amp it reported quot Drive Missing quot When I looked in Event Viewer it STILL had Hard Drive errors NOW I suspect that this is REALLY a power issue amp NOT a hard drive or controller problem My power supply has leads Has SATA type amp IDE type type power connector Has SATA type Connectors Has IDE type amp Floppy type power connector I shut the system down again put the quot bad quot drive in the system disconnected all of the SATA cables amp power cables Plugged the HDD in the Red SATA ports left the DVD uplugged moved the power cables Of course I figured that since there where SATA power connectors on one lead it would be OK to plug in hard drives Keep in mind that this system has been running this way for years with showing this problem although now that I think about it the boot drive has failed times BUT they were all Seagate GB drives amp I have had those fail in several other systems FAR more often than the Hitatchi or Samsung However the WD drives have failed just as often as the Seagate Since I now suspected that this was a power problem I decided to plug in only of the HDD in the SATA power lead amp plugged the remaining HDD in the SATA power lead that the DVD was using amp I left the DVD disconnected I booted the system NOW my question Problem The drive that I took out of the system thinking it was bad now has NO partition When I deleted the partition on the HDD even though it was NOT in the system at the time that partitions are gone I have not done anything else to the drive since I found this problem so does ANYONE have ANY idea what I might be able to do to bring the partitions amp my TB of data back In UNIX there are format commands commands that can bring back files because they re not REALLY gone the allocation table is just not looking in the right place or something I realize this was a L-O-N-G amp Boring story but I had to go through the whole thing to explain the problem amp hopefully get a solution Thank you ... Read morehttp://www.techspot.com/community/topics/windows-xp-hdd-partition-problem-data-lost.183526/
I am helping my uncle built a computer and looking for a gpu which can handle 5 monitors and still have enough power to run a 3d modelling program (dont know the name of it) any ideas?
Running five displays in 2D isn't really demanding at all, its just a case of connectivity. For example, a HD6870 should handle six displays (at least mine does), but dependant on the 3D modelling performance required it changes things dramatically.
You need to consider several things:
1. The connections the displays will actually use, as you'll be using DisplayPort connectors if your adding that many, so converters will need to be considered if the displays don't natively run them.
2. The exact usage of the computer. If its just 3D, and only that, commerical grade (workstation) FirePro GPUs are more than likely a better alternative.
3. Whether you want to run two GPUs in SLI/CF in order to achieve the required capacity to run these displays.
4. An important one...Budget!
It used to be the case (if I remember correctly) that Nvidia GPUs were better optimised for the sort of work your uncle would be using them for. Not sure if its the case now.
Workstation GPUs will have drivers specifically optimised for 3D modelling work, and will be better supported. These are bloody expensive though.
If you want a good all-round GPU with serious horsepower for 3D modelling I'd go with something like a GTX580, or the new GTX680. One problem though, they're both limited to four displays (580 might be three only), so to run five, you'd need a second one in SLI.
Either that, or ditch the fifth display and just run four with a GTX680.
Does anyone have an opinion on a free, good, and easy to use web site for storage and back up of all my home PC files online?
Carbonite is better in my opinion, especially for small business backup. Hope this helps, take care!
Having dredged the internet, I came across this forum amongst the many with questions relating to cd drives working but dvd not etc, but my issue is slightly different, i think.
CDs seem to play ok, and so do DVDs, but I seem to have a problem with my laptop reading a disc with DS games on it that it used to read no problem. The discs can be used in my other half's laptop, so it is clearly a problem with my laptop.
I'd appreciate if anyone could advise where I can start to solve this problem
You need to have the CD/DVD drive replaced. Internal lasers fail in strange ways. The drives are not too expensive and they are easy to replace
A few month's ago my old laptop gave up the ghost and so I asked the local computer geek to take out the hard drive and memory sticks. I thought that was how to save all my "stuff", and he tech did not say otherwise, so I hope I did the right thing?
Anyway, while I wait until I can afford to get a new laptop.......here is my question:...Can I go to a computer store and have all that data put on a CD? Then when I get my laptop I can just transfer the data?
Yes. But it will be cheaper to do it yourself with one of these.
I've got a friend whose wife is ready to kill. The CD of wedding photo's is currently in three pieces and not backed up. Any leads where he can get at least some of the data recovered? At this point in time he's almost "money no object"...
...any leads would be appreciated,
I've never looked into this before. I'd imagine there isn't much that can be done. CDs and DVDs have a short life in data storage terms and really should not be relied on as a permanent storage media for important data. There seem to be a few companies out there that offer data recovery from damaged CDs, but this is usually from scratched rather than broken into pieces disks.
Please provede me all the power diagonis manual in a desktop motherboar for testing whether all the section is received the appropiate volts.
and also tells the procedure that all the connector (usb, ps2, serial port , com port , lan port, and Vga port and sound port ) is ok or not
Please please help me
Hi all I hope someone can help me with this one Recenlty every time booted up monitor made slight crackling sound screen would flicker but monitor would work Gateway said is likely problem w power supply of monitor PC is years old So I started to get data off pc as fast as possible Today monitor made LOT of crackling noises and screen just went black Un- and replugging power cord to monitor made no diff Before this would help stop the crackling Now if I reboot system OR just replug in problem Monitor and data monitor hear the monitor click on and off Monitor power button is lit green Screen remains Monitor problem and data black Is also funny smell like glue but not a burning smell I am frantic in getting remaining data removed from harddrive What can I do I do not have spare monitor I only year old laptop a Is monitor problem power-supply related If it ISN T shouldn t that mean hooking up another monitor will solve this b If use another monitor with newer models do I need special cord connector type and even software on the old pc to recognize substitute monitor c is there such a thing as rent a monitor d is there a way to hook the old pc to my laptop so I can get Monitor problem and data at data How would I do this e anyone have suggestions my only concern is to get the data off the hardrive somone suggested moving harddrive but i have no experience with taking from motherboard and then trying to get some other computer to read it f i also have hand impairment no car and cannot take this pc to repair shop is there a reputable pc repair company if that is my last choice thanks in advance for any one that can help me FeanX nbsp
Doesn't sound to me like there is anything wrong with the PC. You just need a new monitor. Look up 17" LCD monitors, they are cheap. If you can't afford an LCD then check Craigslist, someone may be willing to give you a CRT monitor, and maybe even deliver just because you have to pay a disposal fee most places to get rid of them.
If you don't want to do either of those options. Purchase a USB dock or bare external enclosure that supports PATA/IDE drives (both of these must have their own power supply for a desktop drive). I'm making the assumption the drive is a PATA/IDE drive because of the age of the desktop, you'll want to confirm by taking the side of the case off and looking to see if it has a wide and flat ribbon with 40/80pins or a thin more stiff smaller and flat cable (SATA). Google 'IDE Ribbon' and 'SATA Cable' to see what they look like. If by chance yours is SATA (unlikely at 10yrs old) you'll need a USB-SATA dock rather than a USB-IDE (if those are even made).
So basically like the title says, I can't charge the laptop, I know the charger works though because I tried it another laptop that's the exact same as mine and it works on the other laptop but not mine, is there any inexpensive way I can fix it?
If not then can someone guide me through how to transfer the data over to another laptop?
To transfer data, remove the disk and connect it to the other laptop using an adapter such as this or put it in an enclosure.
Once connected, the laptop will see the HDD as a removable storage and you can click and drag files from one to the other.
I have three 7200rpm HDDs that are used for data storage and currently connected via SATA II, USB 2.0 and eSATA, respectively. Once in very rare blue moon, I may reorganize them and transfer data from and to each other. Other than that, I'm content with speed I'm getting from them and there's no urgent need to upgrade to SATA II or SATA III for this particular application.
I did consider getting a PCI SATA II card but those have their own set of compatibility/reliability issues.
Now, I'm wondering if USB 2.0 is good enough for my 3 HDD storage needs as is or should I ditch the USB 2.0 connection and upgrade my mobo, which has 2 SATA II ports, to a new mobo with more SATA II/III ports?
You would get better performance if all 3 drives were using the same interface connections
There is a specific software that i would like to install to the Server ans to let it run on all the computers on the network. So,instead of installing it on each computer (time consuming) i need a way to install it on the server and let it run on each other computer.
Copy software to a folder on the server
Share the folder over the network
Map the folder as a drive on the workstations
Run the software on the workstations.
This is pretty basic networking.
The software has to be set up so that it can be shared in that way. In most cases you will probably have to install the software on the hard drive and share just the data files over the network. The application has to have that capability.
Hi there I m not sure if this is the right forum so apologies if not I have recently been in touch with my ISP about upgrading my service and we were talking about various packages This touched on download limits and the amount I download - I download a lot of music watch a lot of video iplayer on-line etc Nevertheless he said I had only downloaded GB in the last days which didn t seem that much He then mentioned that I had uploaded a massive GB in the same period I have no idea how that has happened - I don t have a youtube or massive data upload Internet problem vimeo account I rarely send large attachments on e-mails and I don t use file sharing sites I m worried something is hijacking my computer as I have been plagued by random crashes memory errors and slow internet speeds average - mbps on a mbps connection I have Internet massive data upload problem been googling and not found any solutions so I thought I d ask here Any advice anyone can offer would be appreciated Thanks for your time Lee nbsp
I don't know what the problem could be but I have a few points to make..If you use a torrent program you also upload at the same time as you download, if you play games it downloads and uploads (but not so much) and then if you have a 20megs connection the max download speed sould be ~2 to 3mbps, it's a common mistake (at least here) that people think that if they have (for ex.) a 100mbs connection that that also would be the max download speed (when the actual max download speed is ~11mbps).
hi all I am new here and my problem is i wanted to back up my mp collection from my hd so i wrote them out to dvd-r s with the roxio creator It took a while because i had over mp s to back up I din t do any compression or anything i just wrote them to discs Well after the rd one was written i checked and dvd looked fine with about mp s on it but from past experience i never write data Strange DVD problem? just quot look quot at the data So i started to play them for a test in alphabetical order Strange DVD data write problem? - played back fine but would not and then more bad one plays and then badones Ect Until until by no more on the disc would play leaving some bad files Strange But at least i did not delete any of the originals yet by tyhe way all of those played just fine so the writing must have somehow corrupted the backups So then i decided to check the other two discs All played absolutly perfect on the other two dvds The only thing i noticed is taht roxio has something called quot retrieve quot Which pooped right up when i put disc amp back into the dvd writer drive Anybody got any idea what is going on with this situation i will go back and try to write the bad ones again Any help is greatly appriciated Thank you Strange DVD data write problem? jerryuuc redacted com is my email nbsphttp://www.techspot.com/community/topics/strange-dvd-data-write-problem.170962/
Checking file system on C The type of the file system is NTFS One of your disks needs to be checked for consistency You may cancel the disk check but it is strongly recommended safe? log CHKDSK? data saying? SSD What my is Is the that you continue CHKDSK? What is the log saying? Is my SSD data safe? Windows will now check the disk CHKDSK is verifying files stage of file records processed File verification completed Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment Deleting orphan file record segment large file records processed bad file records processed EA records processed reparse records processed CHKDSK is verifying indexes stage of Index entry hiberfil sys of index I in CHKDSK? What is the log saying? Is my SSD data safe? file x points to unused file xa Deleting index entry hiberfil sys in index I of file Index entry pagefile sys of index I in file x points to unused file xa CHKDSK? What is the log saying? Is my SSD data safe? Deleting index entry pagefile sys in index I of file Index entry diagerr xml of index I in file x c points to unused file xa Deleting index entry diagerr xml in index I of file Index entry diagwrn xml of index I in file x c points to unused file xa Deleting index entry diagwrn xml in index I of file Index entry MainQueueOnline que of index I in file x c points to unused file xa Deleting index entry MainQueueOnline que in index I of file Index entry MAINQU QUE of index I in file x c points to unused file xa Deleting index entry MAINQU QUE in index I of file Index entry setup etl of index I in file x c points to unused file xa a Deleting index entry setup etl in index I of file Index entry setup exe of index I in file x c points to unused file xa Deleting index entry setup exe in index I of file Index entry setupact log of index I in file x c points to unused file xa Deleting index entry setupact log in index I of file Index entry setuperr log of index I in file x c points to unused file xa Deleting index entry setuperr log in index I of file Index entry setupinfo of index I in file x c points to unused file xa Deleting index entry setupinfo in index I of file Index entry SETUPI of index I in file x c points to unused file xa Deleting index entry SETUPI in index I of file Index entry MountPointManagerRemoteDatabase of index I in file x c points to unused file xa Deleting index entry MountPointManagerRemoteDatabase in index I of file Index entry MOUNTP of index I in file x c points to unused file xa Deleting index entry MOUNTP in index I of file Index entry Microsoft VisualStudio Tools Applications Runtime v ni dll of index I in file x b points to unused file xa b Deleting index entry Microsoft VisualStudio Tools Applications Runtime v ni dll in index I of file Index entry MICROS DLL of index I in file x b points to unused file xa b Deleting index entry MICROS DLL in index I of file index entries processed Index verification completed unindexed files scanned unindexed files recovered CHKDSK is verifying security descriptors stage of file SDs SIDs processed Cleaning up unused index entries from index SII of file x Cleaning up unused index entries from index SDH of file x Cleaning up unused security descriptors Security descriptor verification completed data files processed CHKDSK is verifying Usn Journal USN bytes processed Usn Journal verification completed CHKDSK discovered free space marked as allocated in the master file table MFT bitmap CHKDSK discovered free space marked as allocated in the volume bitmap Windows has made corrections to the file system KB total disk space KB in files KB in indexes KB in bad sectors KB in use by the system KB occupied by the l... Read more
you might have had some corrupted files or sectors. if CHKDSK does it's thing, you should be ok.
Hello every one! My computer drive E is not showing data and from properties it is shown that data is still there and occupying space. This problem started two days ago when i started my pc and when i opened E there was nothing shown and before it was working properly... kindly help me....
Use A43 File Manager. This is a replacement for Explorer.
Your files are still there, probably hidden by malware infection
at the CMD prompt type these
ATTRIB -S -H /S /D
Hi all Objective to rescue some Movies and piks for my brother from his ANCIENT Toshiba Satellite Pro cdt data Rescuing CDT an Toshiba 480 off old - Windows SE - No rescue OS disks Computer nd hand The OS doesnt matter so much HDD Not sure of size but would it be GIG from specs below IBM OEM Model DTCA - E Rescuing data off an old Toshiba 480 CDT HG Made in Hungary MAR P N J MB MLC F The current status On attempted bootup the Error message appears quot Invalid system disk replace the disk and then press any key quot quot Any key quot produces a replica message Only option to power down was to pull the power plug There were green lights and an orange one active These had little diagrams below Power A loptop with quot on quot in the screen amp a battery respectively Lights were unlit A battery with a square around it something that looks like three disks platters and another with a disk inside a square I suspect one of these to be the hard drive light I didnt hear any clicking or any horrible noises Ive spent some time searching this error and the upshot is it could just as likely be terminal as not So what should I try st to have the best possible success WOuld my safest st move be to just try hooking it up to my IDE USB adapter like in my recent thread with a Compaq HDD rescue Cheers Joanne nbsp
If your objective is to retrieve data from the hard drive then removing it and hooking it to your other PC would be the best move.
The error message on boot would indicate the disk has failed.
You may have to resort to extreme measures as per this guide to get the disk to spin.
Psuedo-Scientific data of longevity: CD-R Psuedo-scientific study study Psuedo-scientific study of CD-R data longevity: of longevity of CD-R data I have a stack of CD-R disks that I filled with data during my undergraduate years so most of the disks are going to be years old plus or minus years I m currently attempting to copy the burned disks back to my hard drive by simple drag and drop copying within Windows I m using an HP dvd drive to read the disks I do not remember with which burner various disks were burned with and that may influence results somewhat I know that the disks were burned with at least burners the first was a old DVD drive with CD burning capabilities it came with an HP tower that I bought in The other drives were a Philips x cd burner and a Pacific Digital x However I do not know which drives burned which disks so since I don t have that data I m only focusing on the success rate of reading all the files burned to particular branded CD-R media So far the results are brands listed with as much information as is given on their label Because of the way this board handles spaces I can t make it look nice So the results are going to be presented as Disks Successfully Read Disks Attempted Notes Staples MB CD-R KB Sec read rate on some Unbranded no label Appear with data on them but none in explorer PNY MB x Tiny star like blemishes on bottom HP x CD-R KB Sec read Imation MB Prime Peripherals MB KB Sec read on a couple disks Memorex CD-R MB Likely a surface blemish Summary is only disks failed to be read and one of those was likely due to physical damage rather than deterioration over time Seems like if you take reasonable care of your disks stacked or sleeved and keep them out of the sun then you can probably expect the disks to last years I don t have DVDs this old so the success rate after years on DVDs may be different due to much tighter tracks nbsp
I have also hundreds of burned CD/DVD's, some of it are pre-Windows 95 and still readable.. I've observed that when stacked horizontally /edit- not vertically/, the ones at the bottom are the first to be non-readable. Those with cases lasts longer. So when I put then on a sleeved bag that fits about 40 or 80 CD's, they are oriented vertically, like books on a library.
Hello Forum I have an old bg external hard drive The thing works great but over the last years between my massive music collection and photo hobby it s almost maxed out So I bought a TB external hard drive What I plan on doing Move the files from from external 500GB Moving data my HDD PC to the old HD to my PC which has TB of space Moving data from 500GB external HDD to my PC available then using backup software to keep those files backed up on the shiny new TB external My question how do I safely move that data from the old External HD to my PC In the past when I first moved GB s from my then-PC to the External HD it not only took FOREVER but I ran into some file corruption some files didn t open and I lost some music somehow Now that I have close to gb s I m scared that I ll run into trouble with just doing simple copy paste Any advice Thx in advance grinthumb nbsp
Maybe you should try Teracopy.
TeraCopy is a compact program designed to copy and move files at the maximum possible speed. It verifies files were copied correctly with a checksum. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. You can pause copy process at any time to free up system resources and continue with a single click.Click to expand...
I haven't tried the program myself, but it's free, and if it does what it says it should be just what you're looking for.
There are also other alternative file copiers.
BTW, the speed depends on how you connect your hdd's, and how many/how big files you have. Many small files take a lot more time to copy than few big files.
So here s the problem I ve got four blocks of corrupted data on my memory card I ve tried deleting them but it doesn t work I would ignore it except now I cannot save anything new on it If I try that data will data Memory PS2 Card for Max Corrupted 16MB on also become corrupted I ve been searching online and unfortunately have yet Corrupted data on 16MB Max Memory Card for PS2 to find a solution I ve tried putting an audio CD in and then deleting the corrupted data Clearly that didn t work I have also tried to format the card but here s the thing I cannot find the option where it says to format I was hesitant to consider the option to format the card at first seeing as all my data will be deleted but I ll get rid of it all if that allows me to able to use this memory card I ve went into the memory card where i can look at all the data seeing if there are any format options- none I tried attaching a picture to show that the memory card does not have an option to format There are only two options quot Enter quot and quot Back quot Help anyone nbsp
Anyone? I really need help. This is driving me insane and I'd just like to deal with it and get it out of the way already. Please....heeeeelp. :/
My 8GB Transcend flash drive became corrupted when I tried opening it on a Windows 7 laptop. It was previously used on a Windows XP laptop.
A new driver was found for the device when it was inserted in the Windows 7 laptop. After this all the file names turned into dingbat or strange symbols and could'nt be opened. The changed names remained when I put the drive back in the other laptop.
I checked the Windows XP laptop and flash drive for viruses and registry errors. I found and corrected 86 errors, but the flash drive is no longer recognised on the Windows XP laptop.
How can I recover my files on the flash drive?
Download Recuva and do a deep scan. In the meantime do not place any files on the flash drive, as it will overwrite previous information contained within it.
It should find some data for you.
The USB of my external hard drive was broken and I changed to a new casing. However, it did not show up in my computer anymore and did not show up in disk management. I read forums and assigned it a drive name in disk management and clicked new partition. The drive was now visible in my computer but it keeps asking to be formatted. I do not want to erase my old data and so did not format.I want access to this data back again. My hard drive is fine and makes no noises. Someone please help.
No guarantee that you'll be able to recover your data. Depends on the size of the HDD, it might take a while for the programs to scan it. Be patient.
Found some posts that might be of help. Good luck.
Hey guys Long story short one of the HD s in my RAID array was being reported as failing Intel Matrix Storage Manager gave me a message inside of windows and on boot the RAID controller said the disk was failing as well So I went disk lose 0 RAID not data trying to failing, and got another HD of equal size The old HD is WD KS and the new one is WD JS so theyre pretty much identical I booted up with only the new and old drives in my PC into Ubuntu Live CD got the ddrescue package and cloned my HD Now I reconnected all my old drives where they were replacing the old failing one with the new cloned one RAID 0 disk failing, trying not to lose data At boot the RAID Manager gives me Unknown Member for the new drive and the nd drive in the array is marked Member Offline What to do I fear that if I remove the drives from the array and create a new one Ill loose all the data Im stuck Help nbsp
Hi, I'm no expert on RAID set ups but found this guide below which may help. It describes the process you have used but there may be some important parts of the process that you missed, notably that you have not used an identical drive to clone to and the disconnection of the drive from the array before cloning.
This information came from here where there are a few other posts that may be usefull.
Any number of drive cloning tools exist that will make exact sector copies. Acronis True Image or Symantec Ghost are often used by Windows users, but many freeware options exist in the UNIX world, such as dd command line tool, which you can run off a bootable Ubuntu or Knoppix CD. You make a bootable disk or CD, disconnect your failing drive from the RAID array, and put it on one channel of a basic IDE or SATA disk controller (pull your RAID controller if its not motherboard based - if it is, you'll have to break the RAID in BIOS, after powering down and disconnecting drives). Plug in a second drive on that same controller, and boot off the bootable media you made that contains the clone tool. Use the clone tool to clone. Substitute the clone drive in the RAID array.
For this to work however, you have to use identical models of drives, and your RAID controller needs not to have put drive markers in the MBR of the drives that have been computed from interrogating drive firmware. Some controllers are easy to fool, and others, with better security awareness, are very tough to fool.
RAID 0 as your primary storage is no way to run a PC, as PC grade hardware is nowhere near reliable enough to do this without recurring trouble. And RAID, even RAID 5 or 6, is no substitute for backing up.Click to expand...
I have IO Data Network storage, can anyone show me how to set password to the Network Hard drive?, currentlt anyone within this network can access it.
you're into a bag of worms - - is this a personal LAN attached NAS or a commerical problem?
for background on the subject, see this PDF
The process to secure access to a NAS storage device is:
take ownership of the root folder and replace all children's permissions
create a group name which implies NAS-access
grant desired privileges to that group name
now go back and add your desired user-logins to the new group name
To revoke access, delete joe-user from that group list
I am apologizing before I start because I have limited knowledge and hope not to waste anyone s time The story I am trying to recover a few from recovering laptop Problem drive motherboard hard data after failure data files from Problem recovering data from laptop hard drive after motherboard failure my old hard drive I have removed my hard drive from my laptop in which the motherboard crashed The hard drive is about a year old laptop years old I placed the removed drive into a usb drive enclosure The failed computer had Vista OS my new computer has Windows OS The failed drive has a password on it at the level of logging into windows When I connected old drive to new computer via usb the new computer recognized it and gave it a drive letter If if clicked on the drive I could see the files in it When I tried to go to the files that contained my data I got a message that I did have permission to open them Then the new computer continuously tried to open the file This process wouldn t stop even trying to kill it with the Task Master I had to pull the drive out of the usb and reboot my new computer questions What should I do Is this a problem with conflicting OS systems passwords too many OS I have looked at forums but could not find anything that I could understand and use Any suggestions Thanks nbsp
Try to take ownership.
1st time it s detect i strat recovering my files using recover my files ver.4.0 regeserd it shows all images what iwant but after an hour it become hang when i restart my pc to connect it again it no detecting & hard is no spinng also
my hard disk is not spinning i want to recover my image help me our
samsung 40 gbhard disk
plz help me out
Welcome to Techspot!
Seriously, I had a little too much coffee today, so don't take serious about #1 and 2, since I could be able to help ya out with my similar experience.
The few other options you could considers:
1. Gripes, cries, bawl all you wants over a 40 gig hard drive. When you're done, consider your lesson learned about backing up your datas to external hard drive, or using the compact discs/media cards in timely basis. Now when you learned your lesson, buy the new drive and moves on.
2. Considers the expensive option by establishing the communication with the data recovery experts in company, and expect your wallet prepping for the long flights with your credit cards. You should expects a few digits of hundred, or probably thousands to recover a part of your valuable datas.
3. Considers the cheaper option by ordering a same I/O board for your hard drive, it's very good chance that one part of your logic board blew after surpassing the hours of operation. It should set you back about 50 bucks or less, and the reliable source to find it is at ebay.
You can type your information of your hard drive here, and I can help you to find the appropriate logic board to give your hard drive another try to recover your datas.
Also, If you have camera and know how to use Marco setting, this would be very helpful to support your thread
First thing to do is to list your spec, by looking at this similar label, you will need to type Model; and numbers/letters under the three barcodes. Take a look at this picture for reference.
The next thing is to find the logic board matching to your hard drive. Look for the white label on the bar of IDE plug bottom, it need to match with your HDD label revisions, and the final thing is to match your chip with your old/broken logic chip. Take a look at here.
Good luck man and looking forward to help ya out.
I use my TI-82 grapics calculator quite a lot (usually for programming), and I'm aving a problem with the variables, primarily the "Y" variable. When I put a store command for a real variable in a program, the calculator stores "0" to it no matter what. The problem usually occurs during the first 30 seconds of program execution. I try entering the command several times, and it still doesn't work right. What I'm mainly worried about is the fact that it hasn't done this when I first bought it.
Will it get worse?
Can I do anything to fix it?
Does this indicate a serious problem elsewhere?
i doubt that this is the right section for this but anyway... try contacting the manufacturer and see if they can help you or google
Here's a problem that's fairly simple to explain.
I have a laptop with two HDD's in RAID-0 configuration. The motherboard died, and I want to back up the data before I send it to the manufacturer for repair.
Is there a way to do this, or is it impossible?
Raid-0 is a big risk as far as data loss goes, if one drive fails you loose everything. After the motherboard is replaced the system should continue to run from the drives you have without any data being lost. You could simply remove both of the drives before you send it for repair.
As far as I know, any back up software will see this Raid setup as one single drive so even if you create a back up you will not be able to restore it to the Raid set up, it will have to go onto one single drive.
To take a back up of the drives you would need to connect them both to another PC and use software like Acronis True Image. I must add that this is only a "may be" as I am not sure if this will work with a RAID-0 configuration when the drives are hooked up to another PC.
I am almost in tears now All my pictures videos and other important irreplaceable files are in my Western Digital passport hard disk - about GB worth of it The Problem what happened I plug - WD help is data saving need Passport My failing on my Hard Disk as usual but this time when I click on certain folders it gets jammed and though I can still cruise through the folders all the files had disappeared I try safely removing the hard drive but it says that the hard drive is still in use so I just pull it off When I plug it back on I was relieved Everything was there but after about mins and or going to certain folders My WD Passport is failing - need help saving data - BAM - it happens again - freezes and everything My WD Passport is failing - need help saving data disappears And again the My WD Passport is failing - need help saving data hard drive cant even be safely ejected and I have to pull it off So I plugged it back amp I tried saving some of my pictures the pictures were copying fine until it got to a certain picture - BAM - it freezes said something like Access denied or no specified file to copy Now I m so scared to even plug it back on What happened to those files corrupted due to virus attack irretrievable But I can still see it there it even previewed OMG Please help me I m going out of my mind Its enough that my laptop is dieing and now my hard disk too How am I going to save my data nbsp
Take the Passport to a computer repair shop or back where you bought it and have them recover your data to a new external drive before it's too late. You will need a new external drive anyway
I have a 500g Western Digital drive which has been removed from an otherwise dead NAS device. When I connect the drive to my computer (W7 64bit) it is detected in management but not in My Computer, so as such it is not allocated a drive letter and I cannot simply open it up and browse the files in explorer.
I have used EASUS Data Recovery and it has recovered all of the files, however this method loses all of the file names and organisation. These are 30,000+ files that I don't really fancy reorganising from scratch.
Does anyone have any ideas? Is there some way to make the drive readable as is?
Check the permissions of the drive and take ownership:
1. Right-click the file or folder, and then click Properties.
2. Click the Security tab.
3. Under Group or user names, click your name to see the permissions you have.
To take ownership of a drive:
1. Right-click the drive (in Computer) that you want to take ownership of, and then click Properties.
2. Click the Security tab, click Advanced, and then click the Owner tab.
3. Click Edit. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
4. Click the name of the person you want to give ownership to (you)
5. Select the Replace owner on subcontainers and objects check box.
6. Click OK
I have T Mobile broadband which allows me to use mb per day which is enough for what I use the internet for However something is downloading between mb mb every week or so when I log on I have checked Macfee and Windows data of Unexplained downloading update and both are set not to download any updates automatically and I have checked the remaining software on my PC but can t find anything else which is downloading Unexplained downloading of data The Task Manager doesn t show me anything either Is there anything included in Windows Home edition which downloads data that I m unware of It would be great to indentify what is downloading this data since my daily limit is only mb and afterwards I am getting locked out as I have downloaded too much Is there an option in Windows Home edition which allows me to see what is being downloaded and from where or any software which will do this Your help is much appreciated nbsp
Your T-mobile provider may be able to identify this phantom down loader for you. There are many Windows 7 updates initially, including Service Pack 1. This would be an issue for the firewall and not the antivirus program
i am sorry if I am in the wrong category, but I couldn't fined the category close to what I am asking, which is how dose one back up all the data from hard drive, what I don't know is do you back it up to another hard drive or if you are using flash card, how do you determine how much of a data you have so to have the right flash card.
thanks for your help
First thing you have to look at is how much data do you have. If you hard drive is full of photo's, music or text documents exceeding the size of a dvd or two then the most convenient way is to use an external or internal hard drive just for storing these files. Then if your system or OS drive fails you won't have lost the important stuff. If it will all fit on a couple of DVD's then burning the files to rerecordable DVD's would be the easiest as you can update or add to these as your data files increase. You could also use a large flash drive in the same way.
On the other hand if you want to keep a full image of your hard drive, which can be restored in the event of your main drive failing then you will need some good back up software like True Image. This would need a spare hard drive, either internal or external. True image can be set to automatically take incrimental backups which just add additional or altered files to the back up, keeping the image up to date.
To make a very long story short I have an acomdata ext hard drive that has in someway failed Anytime I connect it to a computer it can t be read a recovery USB HD disassembling data Need + external help If you would like any background data on the steps that me and another member took to try and get the drive recognized you can look here http www techspot com vb topic - html In that link is all the data and product specs that you would need Now on to the real reason for this thread I would like to take this ext hard drive apart and I am not really sure how to that I hope that somebody on here may have some experience with this hard drive Need help disassembling a USB external HD + data recovery but im not holding my breath I did however Need help disassembling a USB external HD + data recovery find a link to a very similar HD http www gearhack com myink ViewP ridDrive External Hard Drive Disassembly html I read a little bit about the process and I already have questions I think i will save those questions for when we actually get to those steps I will get started on taking it apart and see if anyone has anything to add in Thanx for the help nbsp
Your link looks sufficient. I've got 4 external enclosures hooked up to several computers. The principle is the same in them all. If your enclosure is like the one shown then it is real simple. Ignore all the wires plugged into the green PCB because you don't need to disconnect any of them. Once you get to the point where you can see the drive itself, you may need to remove 4 screws from the bottom (also shown in your link). Then the drive will slide out a few millimeters away from the PCB and can be lifted out.
Hello everyone i recently have had having some computer problems which i have no clue why it s happening I have looked at many other posts yet could still not fix my problem I m new to computer hardware related stuff and to will due not Computer run to program restarting or installations games computer posting I was hoping someone could help me solve this or give a general idea of what s causing this to happen Computer Specs Intel R Pentium R Dual CPU E GHz ATI RADEON HD RV XT less than one month old Gigs of DDR -SDRAM DELL KP Motherboard Problem I recently started to game a lot more on my computer and decided to get a new ATI Radeon HD My computer was working great for about two weeks and now whenever I go to load a game my computer restarts its self It also restarts its self when I try to install any Computer will not run games or program installations due to computer restarting program It stars up the game or program installer then it goes to a black screen leading to the restart The games I play range from old games such as Diablo to Bullet storm I m sure there is a chance that it s a virus so I thought I should mention that I run BitDefender deep system scan Spybot S amp D Avast and Malewarebytes every day Temperatures CPU is C idling not sure of temp right before restart GPU is c idling not sure of temp right before restart I have tried Updating all drivers on my computer Ran prime torture test for six hours with no errors nbsp
Perhaps the power supply is not up to the task and is giving out.
My laptop stopped booting in either safe/command or normal mode. it keeps shutting down after first Windows logo screen(animated block moving from left to right) and keeps repeating...
So to recover data i took drive out and connected as via adapter to USB port. Now when i open it it says 'drive not formmated'. So used EASEUS - it went though and pulled about 25GB data but all are in 'SWF' and 'GZ' format. nothing else.
Can someone guide me what can i do to either fix or recover data?
Hi, i think you should download Hiren use Acronis its better at restoring partitions...
Hope that helps
HI there first time being in a forum as the support from LaCie is rather bad Here some info on the equipment Operating System amp Version VISTA I plugged the hard drive into the laptop to add data First it was recognised and than all of a sudden it just showed the external hard drive without name before it always showed in the recognised devices the name of the hard drive LaCie Now it asks me to format the drive but as I don t redundancy (data error) error Cyclic LaCinema 1TB with want to loos all the data which are on the device I am hoping that you can tell me what the problem is and how to solve it I tried it with a different computer but Cyclic redundancy error (data error) with 1TB LaCinema the same problem Answer from support The Cyclic redundancy error (data error) with 1TB LaCinema drive should not be reformatted to afile system other than FAT If the drive is formattedin a non-FAT format such as NTFS or HFS files will NOT appear on your television screen Also you might like to know that I can use the hard drive with an HDMI cable connected to my TV SO I can actually still watch my movies and listen to the music on it Pc recognises the drive but I cannot access it can t add or deleat files on the hard drive Cables are working exchanged cables to check if that might be the Cyclic redundancy error (data error) with 1TB LaCinema problem Connected the hard drive to a different computer - same problem Hard drive works fine when I connect it to a TV to watch movies or listen to music As I am not a specialist I need a step by step help to recover my files before I reformat the drive nbsphttp://www.techspot.com/community/topics/cyclic-redundancy-error-data-error-with-1tb-lacinema.161268/
I bought recovery external Comcast drive Data from this drive years ago or rather I received as a gift details aside the thing broke and I m having one tiny issue before I can install its guts and save the remainder Data recovery from Comcast external drive of my data Data recovery from Comcast external drive I ve read similar issues on other forums with what is more than likely the same product and found a few conspicuous details It s a Tb drive made up of two Gb WD HD s installed in a Raid format The Primary Master within the case is in a continuous start-up cycle I E Spin up click twice reset so assuming I can get the freezer trick to work long enough I should be able to clean it no problem The problem I DO have is pretty pathetic by comparison I checked the BIOS and the broken drive is recognized as PM while my actual main drive is only M Could this be preventing Windows from normal start-up If so how do I Change the M S setting on a Sata drive so the broken drive is recognized as a slave instead and how do I Change the setting on my main Sata drive to read Primary Master rather than rd Master The second drive is a non-issue it seems as it s recovering fine as I type this but I May have to recover them simultaneously as a virtual Raid if the data is split in some f d way as well Either way only the one drive is giving me problems at the moment nbsphttp://www.techspot.com/community/topics/data-recovery-from-comcast-external-drive.160230/
Well i m bewildered to say the least Was on my laptop Compaq laptop not sure which as I can t seem to find it on Ebuyer anymore until about am maybe Was fine then and has been fine since I got it back in September I think it was Turned it on at about pm today and near on everything has gone Managed to get lost? Laptop data onto my browser Chrome can t anymore and all the history had gone Can t sign into MSN as my contact list isn t ready or something like that Lost all the stuff I had on sticky notes and in folders Tried restarting and turned it Laptop data lost? off then left it then turned it on again still the same Had a message saying something like can t log onto user desktop therefore logging onto Laptop data lost? default user desktop happen twice though Really confused by this Just wondering if anyone knows why it might of gone like this By the way it s running Windows Premium came with this on it Thanks nbsp
Can you restart your pc in 'safe mode'? (power on, then tap F8 key quickly) till a black screen with white text appears. Use the cursor keys to scroll down to 'Last known good configuration', highlight it, 'enter'. See if that gets you back to your own desktop.
Here's the deal.
I got an external hard drive as a gift, and it broke. The drive itself was fine, and rather than losing 2 weeks by RMAing the drive with WD, thus losing my data in the process, I decided to get myself an external enclosure for the HDD inside, which was still in perfect working order.
Once I had that installed, windows 7 wouldn't assign it a drive letter. Acting without thinking, I went ahead and formatted the drive, hoping to recover my data later. This was a mistake, and after having tried three different pieces of software, I can't get anything back.
Short of bringing it to a professional data recovery firm, how might I recover the data from the drive?
Have you tried Recuva?
The important thing to remember in the meantime is NOT to write anything to the hard disk, as a format just removes it, and the right recovery software should be able to relocate it all, as long as the data hasn't been overwritten by other files.
Dare I ask why you have no backups?!?
I am ordering a new Dell system with Raid-1 but not sure of Raid-1's pros & cons.
The main reason is data security. But few questions.
(1) Currently I clone my HDD twice a week as a back up using Acronis True Image software. Could I still do that by removing one of the Raid 1 drive OR the Raid -1 configuration will duplicate the new 3rd drive when I remove the 2nd drive ?
(2) Could I remove the Raid -1 configuration in case if I don't like it for any reasons ? In that case could I continue on cloning the drive as I am doing currently using Acronis ?
(3) Any other pros or cons ?
The downside to RAID 1 would be slower performance (multiple writes) and if something is corrupted or damaged on drive 1 that change will be made to drive 2.
You should be able to break the mirror without any issues. If you want to duplicate a drive with Acronis, you should still be able to do that while the mirror is in place as long as acronis can access the RAID drives. I would suggest either adding a internal drive to store the images or using an external drive.
hi.. i have 3 hard disks connected 2 sata (1TB and 500GB) and a 80GB IDE.. i m having problem transferring data of any kind between these drives.. or to a pendrive.. .. what could be the efficient transfer rate for 40GB between sata and IDE.. it took me 30 mins flat to get that transferred with unable to run any other software or watch a movie from the drive itself (kept freezing)..
my system specs..
i3 540 processor, Asus P55 mobo, 2GB DDR3 1333 MHz ram, ATI 5750 graphic card.
Hello to all here Allow me to introduce myself I am Vlad a collector of sports videos The reason I am disturbing you here has of course something to do with my collection A small part of it was burned on DVD-R discs from Recover from data discs TDK-R DVD-Video TDK The Recover DVD-Video data from TDK-R discs DVDs have never been used for playing but only burned once checked immediately after burning and also transformed into an image to check the discs were error free Once this steps were accomplished they Recover DVD-Video data from TDK-R discs were stored in proper conditions A short time Recover DVD-Video data from TDK-R discs a fellow collector wanted a football match from me and I wanted to create the image and help him with his collection as well In that moment I had a most unpleasant suprise as Windows showed the disk as blank with no file structure whatsoever I have dug in in my collection instantly and in the end I found about discs that all have the same problems and characteristics The brand that has completely failed me is TDK-R discs metalized blue colored Not all of them are with problems but is too big of a coincidence to observe this problem at different discs Now I have tried CD-Roller Iso Buster on some discs and I managed to recover my vobs However still discs in my collection are absolutely unreadable All the softwares show them as empty disc drive not ready etc I have read before on forums that other users experienced the same problem with this TDK Brand and I wondered if anybody has found a solution The physical symptom of my drives is like the drive will not roll the disc properly compared with the discs that were saved which were rolled noisily I could say Please help me in order to recover my data for my collection of course if possible I just have to find a way to see my file structure Best regards Vlad nbsphttp://www.techspot.com/community/topics/recover-dvd-video-data-from-tdk-r-discs.155417/
I have a VAIO VPC computer with Windows 7 operating system. I was installing the software for my Palm TX Organizer, and when it came to connecting the device to the computer, I received the message that the system was locating the drivers for the device and then informing me that no drivers were available. When I tried to sync the device through the palm program it will not recognize the presence of the device. I uninstalled and downloaded a new version of the program from the Palm website encountering the same situation when I connected the device to the computer.
I have also experienced this same situation with the installation of Tunes Plus to allow for the uploading of my iPod music onto iTunes on the computer, I continually get a device not present message.
Can anybody out there throw some light on this problem?
Windows doesn't need drivers to detect a Plug and Play device.
So forget about drivers for the moment....
1) You don't say how you connect the device to your compute. I'll guess USB???
2) Then start with the basics: Are you hearing the USB ding/dong sound affect as you should when connect / disconnect a USB device????
Hi, I dropped an external harddisc on the floor, and it doesn't work.
So, i want to retrieve all the data that isn't broken.
is it possible with the "RECOVER" command in command prompt? I cannot open window. maybe its the "pickup-thing" thats broken and i have to get it fixed, but its like 600 £ and the data is not that important...
If it's physically broken, there's no way other than a very expensive method used by data recovery companies. Does it power on and spin up? Is it recognized when you plug it in? can you remove the drive from the enclosure?
I'm getting a new PC today.
I was wondering how I would go about transferring all my files from my old computer to the new one. Is it just a matter of hooking up the two pcs with a usb? Will my new computer recognize the new pc just like it would an external hardrive?
Any other new advice for the new PC would be more than appreciated.
Which OS? Which files do you want to transfer? Do you have a home network?
I just burned a video to an HP DVD+RW 4x 4.7 Gb dvd and after findong out that it wont play properly in my DVD player wanted to erase it and try a different method. But as I tried to format it, Windows (7) tells me that it cant be done due to it being write protected when I didn't put any protection on it. I burned it by using the burn to disc option when right-clicking the file. Any ideas.
Other thoughts: Any software that can bypass the protection?
Already tried using software to erase, no good.
Don't take this the wrong way but is the disk itself a RW disk?
Hi I have a dell xps m1210 that show a message "invalid configuration information - please run setup program", i can not even enter the setup, when i press de F2 to enter setup it says "preparing to enter setup", but instead entering the setup it gives me the "invalid configuration information - please run setup program"
Can anyone help me
How old is it. Could be a hard drive failure... can you give us the service Tag from the back of the machine?
I have been looking around the internet for solutions for my problem but i cannot find any A few days ago my internet was working fine and my network adapters were as well After I installed some program my wireless internet card doesn t work I went to device manager and of my internet devices have yellow triangle quot quot marks here are the names Realtek RTL E Family PCI-E Fast No internet download program after Ethernet NIC NDIS PCI VEN EC amp DEV amp SUBSYS B amp REV CE This device is not working properly because Windows cannot load the drivers required for this device Realtek RTL SE Wireless LAN PCIE Network Adapter PCI VEN EC amp DEV amp SUBSYS EC amp REV D This device is not working properly because Windows cannot load the drivers required for this device WAN Miniport No internet after program download IP ROOT MS NDISWANIP This device No internet after program download is not working properly because Windows cannot load the drivers required for this device WAN Miniport IPv ROOT MS NDISWANIPV This device is not working properly because Windows cannot load the drivers required for this device WAN Miniport Network Monitor ROOT MS NDISWANBH This device is not working properly because Windows cannot load the drivers required for this device I tried system restore and it did not work I tried getting programs to help but nothing worked I have a vista- bit computer nbsp
It appears the drivers are not installed, or the incorrect drivers are installed, or you have a defective RealTek. Some RealTeks have a switch that must be set. Some RealTek's require updated firmware download to work with VISTA. Firmware and driver updates are always available at the mfg site, but not always easy to find ezactly where they are..
You might also dry a gurgle search for RealTek RTL8101E and for simply RTL8101E drivers or Firmware.
Hello everyone, I need a program that's like Furmark for Windows 7 64-Bit, I'm going to get a GeForce 7950 GX2 used from someone and I would like to test it for a bit before I buy it.
How about Furmark? It runs perfectly fine on Win 7 64-bit
I have a dell 2400 that died on me so I pulled the hard drive hoping to transfer pictures, quickbooks, etc. to my new laptop. I have a self powered Sabrent SATA/IDE USB adapter from newegg. Anyone use on of these before and have any luck???
Any information will be greatly appreciated! Thanks.
tried with both 3.5inch IDE, 2.5inch IDE and sata with no problem. looks the same with different brand though.
My hard drive has busted so im taking it in for repairs. The people there say before it is to be fixed they will recover the data for me. Basically i am woundering is there any stage where they will look at my computer deleted/non deleted history. Obviosly i have nothing illegal i just would not prefer my personal life to be desplayed in front of everyone else.
Also would they see softwear such a microsoft word and excel, for a save all my passwords on these documents that im sure could be easily accessed.
If they are able to access the data on the hard drive then, yes, they can see any data on the hard drive. That includes any documents, deleted files, etc. Data that is deleted is not gone forever, it's just hidden. If something overwrites that area of the disk, the old data should be gone but advanced forensics may be able to recover parts or all of the data.
Data Loss Situation Best Chance of Recovery At the moment you have a failure it is important to record what you remember and from this point forward what you do to attempt getting the data back Technicians have to be detectives in some cases as when the drive arrives it is very vague as to the events leading up to the failure and the failure itself then the what steps did you try for the recovery question Avoiding doing anything further that could cause damage to the data is of Data chance ? situation best recovery loss of course based on what type of failure has occurred Logical recovery data deletion or read errors mean that anything you apply to the drive can cause further damage as the drive is still in working order Electrical damage likely safest of all failures as if the drive does not receive power the data can not be changed or affected until power is restored to the drive Physical failure clicking whirring grinding and internal noise and every time you put power to the drive the data has a chance of further damage incurring I liken putting power to the drive at this point to Russian roulette as you power up the drive it s putting the most force into the reading heads and if then you hear silence the heads may well have died Data loss situation ? best chance of recovery completely at this point and a ring is made then causing the data to be unrecoverable If you have a logical deletion or failure do not download any recovery tools to the drive you wish to recover data to you would be surprised how many end users over write the data they are wishing to recover If you drive has picked up read errors or bad segments you can imagine a defrag or scan disk option being like the card file at the library and at the time the drive is working away putting everything in a new order behind the scenes it would be like throwing the library card file up in the air as the drive is then loosing al the pointers on the drive that point to the location of the data stored on the drive Always stop to consider how important the lost data is Do you have a copy Who might have the back up of your lost data- something you have emailed as in pictures Then you can decide value on the missing data what the important data is you have lost and what measures you will take to recovery the data or not Sometimes the cost of the recovery will out weight the value and other times the value will be found to be irreplaceable nbsp
And your question is?
My hard drive bit the dust. They guy that looked at said that you can still have stuff taken off of it but it's quite pricey. Any idea how pricey it is? I would like some stuff that is on there. Going to get a new computer instead of replacing hard drive. Any suggestions on an affordable computer for some photo editing and some smaller gaming. I had a gateway. With the hard drive crashing I know for sure I'm getting an extra external hard drive. I learned my lesson.
Probably going to be a couple hundred dollars for them just to look at it, then probably another $600 to a few thousand for recovery. Depending on how dead it is you may be able to recover it yourself. Sometimes you can buy the same drive on ebay, and swap the circuit boards....
I don't have a suggestion for an affordable computer right now, but plenty of people here can give advice if you feel comfortable building your own. Will need a budget though before suggestions can be made.
Also, externals can fail too, so if you are getting one to back up onto that is a good idea, but its not a good idea if you are getting it to hold the only copy of your important files.