Windows Support Forum

M.S outlook 2007 has stoped working after month of work

Q: M.S outlook 2007 has stoped working after month of work

I found a proposed solution from Shockerprof (junior 1) proposing to delete all ussers acounts and reinsall them.
But how can I delete the users if outlook faids out a few seccond after trying to open it?
anybody can help?

Relevancy 100%
Preferred Solution: M.S outlook 2007 has stoped working after month of work

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: M.S outlook 2007 has stoped working after month of work

Welcome to TSG!

Have you tried running Office Diagnostics, or repairing the installation?
Have a read here:
How to install the individual 2007 Office features or to repair the installed 2007 Office programs

https://forums.techguy.org/threads/m-s-outlook-2007-has-stoped-working-after-month-of-work.943926/
Relevancy 19.35%

Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp

A:My tower Power button will not work

You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
 

http://www.techspot.com/community/topics/my-tower-power-button-will-not-work.203422/
Relevancy 19.35%

I recently bought a Windows DVD to put it on the new PC I'm building for my mom. That PC has troubles with the DVD drive itself (stupid motherboard doesn't have IDE..), so I figured I'd set up a bootable USB to install Windows before the adapter arrives. Problem is, the installation DVD isn't playing on my drive (I tried another DVD with a movie on it before, so I don't think its my drive). I brought it to a PC shop and for them it worked fine, even though its quite scratched on the back (I guess the person selling those DVDs doesn't know how to ship them properly) I didn't wanna pay 20 bucks for them copying the DVD, even though I'll probably end up having to do that.

Any ideas what the problem is, or what I can do? I'm not sure if the DVD will work in my moms drive either..
 

http://www.techspot.com/community/topics/dvd-works-with-other-drives-but-not-mine-while-other-dvds-work.216661/
Relevancy 16.77%

When I try and access the internet through any of the main browsers (I.e. Internet Explorer, Google Chrome, Firefox and Safari) they tell me along the lines of 'unable to access the network' and 'this page can't be displayed' after taking a while attempting to load. I also cannot access it through any of my Windows 8 apps. I know it's not an issue with the home broadband itself and is something to do with my laptop as it is running fine both wirelessly and through using an Ethernet cable on all other devices. I would really appreciate some help with trying to fix this asap as I have spent a lot of time researching this issue and trying most things to resolve it without success, I also need to use the internet for loads of coursework over the summer hols and cannot afford to be taking it to a pricey IT technician. Please helppp
 

A:My laptop cannot connect to the internet, even though wireless and ethernet are working

Take a look at the file
\windows\system32\drivers\etc\hosts​there MUST be at least a line reading 127.0.0.1 LOCALHOST
but the question is there anything other than comments in it?
If so, leave the comments and the localhost line and delete everything else.

If you modify the hosts file, then you also need to

ipconfig /flushdns
net stop "dns client"
net start "dns client"

 

http://www.techspot.com/community/topics/my-laptop-cannot-connect-to-the-internet-even-though-wireless-and-ethernet-are-working.195158/
Relevancy 17.2%

SO close Help me get this ball across the goal line I have a old quot Microtek ScanMaker E quot scsi flatbed scanner that originally came with an ISA scsi interface to give you some idea of how old it is I connected it to my PC using a equally ancient Tekram F pci SCSI card c 64bit my got scanner Almost w/Win7 old working that I ve been using with bit WinXP Pro for years The scanner has an - quot x quot scanning bed dpi and bit color reproduction It works great and I see no reason to spend a few hundred dollars to replace it just for Win compatibility so I m trying to get it to work with the bit Almost got my old scanner working w/Win7 64bit version of Windows To complicate things the company that made my SCSI card Tekram went out of business years ago so the bit XP driver was the last they made But after MUCH Googling I found a bit Win compatible driver for another card using the same chipset and low amp behold Windows recognized it It then quot detected quot my scanner for the first time but didn t have a driver Again after much searching I found a Vista bit version of Microtek s quot ScanWizard quot scanner software with bit driver and now bit Windows detects my scanner Yeah But when I try to access the scanner I get an error telling me I quot must install Color Matching System first quot for the scanner to work I don t remember any such software being needed to use the scanner with XP and there is no such program in the ScanWizard software I just installed searching online suggests I will also need to run an quot ICC Color Profiler quot Anyone have any ideas So close yet so far I love doing things I was told were quot impossible quot Help nbsp

A:Almost got my old scanner working w/Win7 64bit

That Microtek ScanMaker E3 scsi flatbed scanner ... didn't even work well with Windows XP... and the cost in time and components to attempt to make it work are much higher than a decent Canon or Epson scanner which can be had fof $40... Less if used...

On what system are you runny SCSI ?
 

http://www.techspot.com/community/topics/almost-got-my-old-scanner-working-w-win7-64bit.157055/
Relevancy 18.92%

I have an Aspire one NAV50 with Windows 7 starter.

One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.

I've tried the ff on my laptop:

restart
update
scan the laptop with MalwareBytes
Fn+f2
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
 

A:Laptop would work on ethernet cable not on Wireless Connections

I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
 

http://www.techspot.com/community/topics/laptop-would-work-on-ethernet-cable-not-on-wireless-connections.201158/
Relevancy 19.35%

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.
 

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 18.92%

Hey guys,

I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.

The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.

Best Regards,
Om
 

A:Wifi on my laptop won't work but works when I use the ethernet cable

I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.

May be it will help you.
Regards
MD. MAHMUDUL HASAN
 

http://www.techspot.com/community/topics/wifi-on-my-laptop-wont-work-but-works-when-i-use-the-ethernet-cable.200754/
Relevancy 18.92%

Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
 

A:My WiFi on my laptop won't work but works with Ethernet cable

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-on-my-laptop-wont-work-but-works-with-ethernet-cable.206652/
Relevancy 35.26%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 19.78%

Hey guys... I just got a new EVGA GTX650 ti boost superclocked. I just put it in and I was not getting any signal to my monitor. I tried VGA, HDMI and DVI. Nothing worked and when I took it out to try booting with my integrated graphics, I didn't get any signal to my monitor. All of my connections and wires are connected properly, my power supply is the right voltage and has enough power to support my graphics card. My hard drives are spinning but I cant access my BIOS. I have tried everything that is common. I know my graphics card is not defective and im thinking that it might be my motherboard. Any suggestions?
 

A:My integrated graphics won't work

You were using integrated graphics before the discrete card? It's strange that your onboard isn't working if it was before hand. Usually it's just a overlooked cable or something plugged in the wrong place. Did you make any changes to BIOS? Some boards require you to change the primary display adapter to PCIE or onboard. Maybe a BIOS reset will help the situation. I doubt there is any issues with the MOBO itself. I suggest stripping the build down to nothing but the bear essential components for operation. This way you can isolate the issue a lot easier.
 

http://www.techspot.com/community/topics/my-integrated-graphics-wont-work.194322/
Relevancy 17.2%

Greetings!

I have an MSI GS70 laptop here , its about 1 month old and the webcam has stopped working,

It has worked earlier, Nothing happens when I try to start it and when I try to find it in the device manager it is not there.

Any idea what I can try?

Thanks!
 

A:MSI GS70 Gaming laptop Webcam not working

Ok I have an MSI GT70, did you try activating it via the toolbar at the top of the screen that comes on MSI laptops. It looks like a tiny paperclip at the top of the screen in the center, there should be once you open that toolbar up an option to activate the webcam.
 

http://www.techspot.com/community/topics/msi-gs70-gaming-laptop-webcam-not-working.197211/
Relevancy 19.78%

I am considering purchasing a MSI ATX DDR3 2133 Motherboard 970 for my new computer build, and heard from somewhere that it is not compatable with windows 7? Is this true?
 

A:Will my mobo work?

Where did you hear that? It will run Windows 7 just fine.
 

http://www.techspot.com/community/topics/will-my-mobo-work.214529/
Relevancy 17.2%

Resolved DNS on other on one problem working laptop, DNS network computers problem on one laptop other computers on network working I returned home for the holidays with my laptop running Windows Enterprise -bit When I connect to the wireless network my laptop reports that it is connected with internet access but there is no browsing capability at all P P works Steam works but Chrome Firefox Steam browser give me DNS problem on one laptop, other computers on network working the quot This webpage is not available quot page telling me that the DNS lookup failed All the other computers at home are working happily My settings were to obtain an IP address and DNS server address automatically nslookup said DNS request timed out It didn t work with the wireless or the wired internet with an ethernet cable I set up another network by using my iPhone as a hotspot to make sure it wasn t an issue with all connections and my computer could browse just fine using the iPhone hotspot But it didn t work with my home connection The first thing I tried was to use openDNS s DNS addresses and with my home connection It still failed and nslookup gave the same quot DNS request timed out quot I reset the modem router it s combined unfortunately to factory settings and tried directly connecting with an ethernet cable again It worked for half a second and I opened webpages before it stopped and gave the DNS errors again I tried the wireless internet and it still didn t work I can connect to the modem router I made a guest network just to try it and I got DNS errors again When I reconnected to my primary network it worked for half a second again then stopped My next attempt to fix it was going to the cmd prompt and typing ipconfig release then ipconfig renew I restarted my computer and tried again but I still received the same errors with P P working like before I turned off my firewall and tried but it still didn t work Then I tried ipconfig registerdns restarted my computer and tried again Still didn t work At this point IPv has been disabled but it s still not working I restarted the modem router multiple times but it does nothing to alleviate the problem I have Microsoft Security Essentials did a scan nothing detected Also tried System Restore to two days ago got an error about how it failed Summary Using openDNS address Turned off IPv ipconfig release ipconfig renew ipconfig registerdns no virus trojan system restore failed None of the above worked Other computers at home using the ISP s provided DNS server work My computer works with other connections but not my home network Is there anything else I can try Thanks in advance nbsp

A:DNS problem on one laptop, other computers on network working

Fe3C said:





Summary:
Using openDNS address.
Turned off IPv6
ipconfig /release
ipconfig /renew
ipconfig /registerdns
no virus/trojan
system restore failed

None of the above worked.
Other computers at home using the ISP's provided DNS server work[1].
My computer works with other connections, but not my home network.Click to expand...

Good work. The router is fine[1] so don't fuss with it anymore.

Look for an updated driver for your WiFi adaptor.

On any working system run IPCONFIG /ALL and compare it to the results on the failing system. Look for missing Gateway address or IP address like 169.x.y.z

Some concern re failing system restore, but that's not a networking problem per se.

Work on a wired network first and then move to wifi.
Empty all manual settings on the LAN Connection (get properties, scroll to tcp/ip, click property button - - check ALL tabs; delete everything.

You should be able to PING 8.8.8.8 and then PING google-public-dns-a.google.com.
This shows the LAN adaptor has connectivity and DNS resolution.

Now do the very same sequence with your WiFi connection.
Disconnection from the router and then reconnect.
Inspect IPCONFIG /ALL again to look for valid IP addr, gateway addr and valid DNS settings. (not the OpenDNS you had before).

ping 8.8.8.8 ; if this doesn't work, then the WiFi settings are invalid even before DNS is an issue.
 

http://www.techspot.com/community/topics/dns-problem-on-one-laptop-other-computers-on-network-working.174565/
Relevancy 17.63%

So this is my first time making a forum post since 169.xx ip address working, Ethernet not I am not desperate because nothing I ve tried has worked So two weeks ago I had an electrical surge in my house on my desktop the ethernet port on the motherboard died so I sent Ethernet not working, 169.xx ip address back my motherboard to have that fixed Now that I have it back I tried getting my ethernet to work though now the Ethernet not working, 169.xx ip address connection properly works as in Ethernet not working, 169.xx ip address the local area connection is now at least recognized I still have no internet access I just tried reinstalling Windows bit fresh install after I wiped everything My ethernet adapter is called Realtek PCIe GBI Family controller I have a E Linksys router and a Comcast modem I tried plugging the ethernet cable into each other but no luck Currently I m attempting to at least make the desktop use the modem internet directly I seem to be sending packets but not receiving them when I looked in the Status of the Local Area Connection in network connection details I have an autoconfiguration ipv of xxx xxx ipv subnet mask and nothing in the ipv default gateway dns server or wins server and no ipv default gateway I ve tried many things too many to name now but I am willing to try anything you guys mention and post the appropriate data or logs just tell me what it is you would like to see Any help would be highly appreciated nbsp

A:Ethernet not working, 169.xx ip address

Anytime you see 169.x.y.z, that's the clue that your DHCP request to the router did not get an answer.

DHCP should return an IP address directly related to your router's address and two DNS addresses.

search the form for DHCP - - I've posted a solution here on TS.
 

http://www.techspot.com/community/topics/ethernet-not-working-169-xx-ip-address.203386/
Relevancy 17.2%

HP G62-b80SS laptop
Many keys in the keyboard aren't working. I've successfully replaced the motherboard for this laptop because it went dead because of some dampness trickling going inside and is now otherwise working fine. It's been abandoned for 7 months. I've reseated the keyboard connector and cleaned it with a contact cleaner.
I guess I need to get a new keyboard, am I right?
Thanks!
 

A:Many keys in keyboard not working HP G62-b80SS laptop

Or the motherboard keyboard connector is damages by corrosion...
 

http://www.techspot.com/community/topics/many-keys-in-keyboard-not-working-hp-g62-b80ss-laptop.213407/
Relevancy 16.34%

AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware. There's a ton of controversy surrounding what did...

Read more
 

A:AMD is working on Catalyst beta drivers for 'The Witcher 3: Wild Hunt' and 'Project Cars'

"AMD graphics card owners that have tried playing The Witcher 3: Wild Hunt or Project Cars are likely already aware of the fact that both titles run like crap on Radeon hardware."

At the risk of pointing out the obvious, "runs like crap" doesn't strike me as professional an expression as "runs terribly" or "are both exceptionally poor performers on..." It may convey the sentiments of the accompanying article comments, but those are supposed to be crude.
 

http://www.techspot.com/community/topics/amd-is-working-on-catalyst-beta-drivers-for-the-witcher-3-wild-hunt-and-project-cars.213323/
Relevancy 17.63%

My hard drive died and I took it to a computer shop where he put in a new one and windows XP, as no one had a vista disc. Since I got it back the blue Fn key doesn't work. Numbers lock works, but all the F keys, volume controls, brightness controls and my crt/lcd don't work at all. Dell doesn't seem to have a driver that I can find. Does anyone have one that would fix this? Is there another way to use the F keys, especially the crt/lcd without having to use the Fn key?
 

A:Fn key not working on Inspiron 1501 with XP

Be sure you are the registered owner, then call Dell Tech support, and ask them to send you the install disk set... It is usually free for the original owner, if not supplied at time of purchase.
 

http://www.techspot.com/community/topics/fn-key-not-working-on-inspiron-1501-with-xp.156952/
Relevancy 19.35%

As I don't go menu and Monitor's won't buttons the work away am writing this I have this blue square on the screen with all the settings for this monitor Whichever button I press on the monitor the menu won t go away Not even the power button works so that means I can Monitor's menu won't go away and the buttons don't work t disable Monitor's menu won't go away and the buttons don't work the monitor Unplugging and plugging it back in doesn t work as soon as the picture appears the menu appears Monitor's menu won't go away and the buttons don't work as well Let me give you a bit of a history as it might help determine the cause About a month ago my old monitor monitor started behaving weird It started turning itself off every now and again Sometimes few times a minute Every time it turns off it turns back on with the splash screen saying quot BENQ quot and everything I had no idea why it does that I tried pressing the buttons on it to go into the menu but every button seemed to shut it off and every button seemed to turn it on So I gave it to a family friend to try and fix it He said that the quot control board quot started dying and that he doesn t have a spare one or something like that He then gave me a spare monitor of his monitor until I can buy a new one or fix monitor So I took monitor from him and sent monitor to the shop so they can try and fix it About a week passes and the shop calls and says that they fixed monitor I go and pick it up and when I came home I unplug monitor and plug in monitor monitor was working perfectly then Monitor worked for about minutes and started shutting down again And when I tried using the buttons they wouldn t work again Same thing as last time So I return it to the shop and tell them that it doesn t work That was about a week and a half ago They still didn t fix it The problem is now the monitor also started having problems It doesn t turn off yet but the menu buttons don t work Power button doesn t work Nothing And on top of that the menu won t disappear from the screen As I am typing this there s a menu on top of everything Every now and again the menu will switch to a different option like quot brightness quot quot auto adjustment quot and such like the buttons are being pressed Now I am wondering could it be that my PC is quot breaking quot these monitors Is there a way for a PC to physically damage a monitor What should I do in that case Also I should say that ever since monitor died and after I installed monitor my PC has been getting blue screens of death It hasn t happened once in years since I got this PC and it started after I got monitor I don t know if that s something that s important but there it is If you need more info please let me know I am trying to figure out what is happening and every bit of help is appreciated Thank you nbsp

A:Monitor's menu won't go away and the buttons don't work

No one has any relevant information?
 

http://www.techspot.com/community/topics/monitors-menu-wont-go-away-and-the-buttons-dont-work.212651/
Relevancy 17.2%

Hi
I have an asus x555ld-x0549h, it has a built in camera that does not work. I have been searching for a driver all day and didnt find a thing...
then I tought that the camera was being blocked and I enabled it and... still noting...
can anyone help me please?
I'm using windows 8 and the camera app says that I need to plug in a camera... so.... wtf?! :S
 

A:Asus x555ld built in camera not working

How old is this laptop?
 

http://www.techspot.com/community/topics/asus-x555ld-built-in-camera-not-working.212530/
Relevancy 17.2%

I have no clue if I'm posting this in the correct place but here it goes my Sell insperion laptop worked just fine as of a couple of days ago. We ended up connecting it to the Ethernet cord and it works. We've tried restarting it numerous times and it doesn't recognize any networks. Any suggestions?
 

A:Wi-Fi stopped working now only works wired

Have you checked under your Device Manager to see if the WiFi was disabled for some reason? Does your Dell have a physical WiFi button, and is it turned on? You could also go to the Dell website and download the WiFi device drivers for your specific laptop. Un-install the WiFi drivers, reboot and then re-install them.
 

http://www.techspot.com/community/topics/wi-fi-stopped-working-now-only-works-wired.212471/
Relevancy 17.63%

My computer is able to connect to the internet through an ethernet cable, but no devices besides my tv is able to wirelessly connect at all. The internet doesn't even show in the Choose A Network tab on my Ipad.
 

A:WiFi isn't working but ethernet is

What is the make and model of the router or modem you are using? What type of internet connection do you have (DSL / Cable / Satellite / etc). What have you done so far to try to correct this problem (reboot equipment, change settings, unplug then re-plug equipment, etc.)? Need to provide more information before anyone can really try to help.
 

http://www.techspot.com/community/topics/wifi-isnt-working-but-ethernet-is.212323/
Relevancy 18.49%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 18.92%

Neither my keyboard or mouse are working on any of the 7 USB ports on my computer. My mouse was initially working, but I read somewhere if you delete the keyboard drivers you can reinstall them and it will work again. BUT when I was doing that I stupidly uninstalled my mouse driver so now NOTHING works. I can't try if it works in safe mode because my keyboard doesn't respond when I hit f12 during boot up.

When I plug in the mouse or keyboard, I get a window that pops up asking if I want to install the hardware, but it's impossible for me to do anything because my mouse and keyboard don't work! If anyone has any ideas I would greatly appreciate the help. Thanks!
 

A:My Dell Demension e510's (Window's XP) keyboard and mouse don't work

First I would try to find a different working keyboard because you should at less be able to boot into safe mode because the drivers don't even load until windows start loading.
 

http://www.techspot.com/community/topics/my-dell-demension-e510s-windows-xp-keyboard-and-mouse-dont-work.211116/
Relevancy 16.77%

Hi there,

The laptop I have is an asus P550C, windows 7.

This laptop came pre-installed with Mcafee Antivirus protection for a limited amount of time. Wifi was working perfectly fine although there were occasions where the connection would disconnect by itself. After the free-trial ended, I did not want to buy the packaged they were advertising so I went to my Control Panel and uninstalled Mcafee. This was when the problem started to occur. The internet access icon had a red x and when I went to diagnose the problem, it said that I needed to connect via an ethernet cable. Since then, I have connected it with an ethernet and internet works and I have also installed AVG's free antivirus software.

I have tried to
type: ipconfig /flushdns
type: nbtstat -R
type: netsh int reset all
type: netsh int ip reset
type: netsh winsock reset

But I still cannot connect via wifi. Please help
 

A:Wifi has stopped working but still able to connect to internet via ethernet cable

C:\Users\jay>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : jay-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : vlan1.phub.net.cable.rogers.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 54-35-30-05-36-68
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : BC-EE-7B-28-57-D7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9dfa:dcc6:3d3b:ae86%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : March-27-15 4:14:52 PM
Lease Expires . . . . . . . . . . : March-28-15 4:14:52 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 247262843
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-51-D7-D4-BC-EE-7B-28-57-D7

DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.vlan1.phub.net.cable.rogers.com:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{A9DA0935-EE1F-4A59-8A97-DDA13A7DFFEA}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:2c47:1b6c:9c1d:d26b(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::2c47:1b6c:9c1d:d26b%14(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\jay
 

http://www.techspot.com/community/topics/wifi-has-stopped-working-but-still-able-to-connect-to-internet-via-ethernet-cable.210787/
Relevancy 17.63%

I have same problem Recently ISP have changed my ADSL working stops Wi-Fi router to vDSL modem WiFirouter I m using assembled service of internet IPTV and VoIP My LAN works perfectly but WiFi Wi-Fi stops working is giving me some hard time everything works nice and I m using internet on my laptop Lenovo t Win phone LG G andorid tablet iPad but day after all devices are showing that they are connected to WIFI but there is no or low internet response for example skype works but cant open some pages other are opening but some images don t load fb etc I can t log in into router to reboot it And this issue when internet isn t working normally but showing as connected persists on all devices I ve mentioned above But at the same time when internet isn t working when I try it on my desktop PC Win everything works normally Then I need to go to router turn it off then on and everything works perfectly sometimes for a day sometimes for a couple of days I ve tried everything changing IP lease time changing freq form to changing channels switching from b g n to N almost everything I could think of My WiFi is secured with WPA PWA -PSK-TKIP AES password and name is a simple one with char name My modem router information s are Device Type ZXHN H N Device Serial No ZTEEG E Batch No T HW Version V SW Version V L BOSNIA BOOT Version V do anyone have an idea what it can be the reason why this is happening nbsp

A:Wi-Fi stops working

NetWalker85. Since your desktop works when your wireless devices don't, it's not your Internet signal from your ISP. Your devices are showing the router's SSID which is being broadcast, but not the wireless internet signal from the router. I would reset the modem/router to it's default settings and change the necessary items (SSID and passwords,security settings, max number of IP addresses for the router to assign to devices,etc). if that was never done. If the problem is still there, I would request a new combo unit, or possibly see if there is a firmware update for that combo unit.
 

http://www.techspot.com/community/topics/wi-fi-stops-working.210644/
Relevancy 17.63%

Gateway NE56R41u laptop freezes after 5-10 minutes of running, ran many many tests and scans to try to find malware but nothing was found, it works fine in safe mode but not in safe mode with networking, please help
 

A:Gateway Laptop isn't working

When something works in Safe Mode but not while in Normal it points to a driver issue. Have you tried updating your WiFi/Network Interface Card (NIC) drivers for your system from Gateway's website?

Do you use a cooling pad? Laptops can get hot quickly and high temps will freeze/shut-down a system fast.
 

http://www.techspot.com/community/topics/gateway-laptop-isnt-working.209213/
Relevancy 17.63%

Hi when I applied some new Thermal paste to my rig I noticed that my case fan stop spinning after the POST test on bootup.
my build is.
G33MO3 Motherboard
E8500 CPU
EVGA gtx 650 GPU
250 Seagate HDD
Simple samsung Optical drive
430w corsair PSU
2x1Gb DDR2 RAM
I am running the latest version of BIOS for my motherboard (dell revision 1.0.15).
This is unfortunate as I was just about to overclock my system and now the only fan on my case has gone.
I know the fan works because during POST it spins up.
I've tried clearing the BIOS to default with CMOS but that did nothing but slow my computer down.
Thank you.
 

A:Fan not working and PC instantly slowed down?

Hmm, don't try clearing the BIOS, try looking through it, the fan might be disabled for some reason in there. Also, do you have any other places you could plug that fan into ( on the motherboard, or you could just use two wires to connect it to the PSU directly ? Also, make sure any fan-control or overclock software doesn't interfere.
 

http://www.techspot.com/community/topics/fan-not-working-and-pc-instantly-slowed-down.207984/
Relevancy 17.63%

It was like any other day while I was working on the computer while my PC suddenly shut down I tried turning it back PC working not GPU using on but nothing So I opened up the case and noticed that when I press the power button not even PC not working using GPU the motherboard fan starts spinning I stripped down everything from the system and tried running it It worked flawlessly So after putting everything back on one by one the culprit turned out to be the Graphics card The computer would turn on with the card inserted into the PCI slot Whenever I would place it in there not even connected with the VGA cable just plugged in the slot the motherboard would refuse to start up So I decided to check the GPU for cylinder holes but everything seemed to be intact no burnt smell or anything The PC works just fine with the integrated graphics Can it really just die like that without a proper reason It wasn t over-heating I had that one checked So what should I do right now I don t have a spare GPU to check if it s the PCI slot that s the problem or the GPU which was fine like minutes ago nbsp

A:PC not working using GPU

Hmm, what graphics card are you using ? It might be that your power supply lost it's wattage over time, and that it's now not strong enough to power it. How much W does your PSU give ?
 

http://www.techspot.com/community/topics/pc-not-working-using-gpu.209267/
Relevancy 57.19%

I have a HP HPE- f i quad core with a TB WD primary and a TB WD secondary that I ve had for about - years and have cloned the primary several times with no problems About - weeks ago I cloned the primary once again with another TB WD only to find that after the cloning the DVD drive stopped writing It actually begins the process but after writing the lead-in it simply sits there and spins heating the disk and of course making it unusable Once this occurs working DVD burner stoped after cloning it usually cannot be stopped by any means and the machine has to be hard rebooted to proceed Since the first cloning operation I have re-cloned the original using three different cloning programs all with the same result as well as cloning to a new TB WD drive with the same results I ve also replaced the DVD drive with two different known good drives one being brand new went through all of the HP troubleshooting procedures uninstalled DVD burner stoped working after cloning the drivers and re-installed them deleted the high and low files from the registry etc with no success The strange thing is that if I use the original hard drive along with the cloned drive I can boot off the original and burn to the same DVD drive with no problem I can also write CD s with both the original and the clone both audio disks and data disks I ve also ran the DVD drive off from one of the other SATA ports on the mother board along with replacing the cable I even took the computer into a computer shop and they worked on it for over days and could not identify the problem To make a long story short this problem is just about ready to get the best of me I ve ordered an external DVD drive believing this will work but I would really like to determine why it is doing what it is doing The cloning should not have caused it but seems to be the only thing that is common to the problem I would really appreciate any incite that you may have nbsp

A:DVD burner stoped working after cloning

The only suggestion I can think of is some type of burning software is broken with the Cloned OS. If you have any software installed that handles the burning (include Roxio, Creative and all others) Remove them and the Registry files related.

I suggest using Revo Uninstaller as it will automatically search out and tell you whats left over, and let you delete them or save them. I suggest deleting all files/folders and registry items left to ensure they are not somehow causing the issue.
 

http://www.techspot.com/community/topics/dvd-burner-stoped-working-after-cloning.208883/
Relevancy 16.77%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

http://www.techspot.com/community/topics/freeagent-1tb-external-hard-stopped-working-unknown-not-initialized.208828/
Relevancy 18.49%

My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
 

A:Internet connects but doesnt work on wifi, ethernet works fine

Bump
If there is any more info I can give to help you help me, please let me know.
 

http://www.techspot.com/community/topics/internet-connects-but-doesnt-work-on-wifi-ethernet-works-fine.199827/
Relevancy 18.92%

Hey!
I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?

These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Aspire V5-V561PG-9683
Model number: Z5WV2

If you need more info let me know, I still have everything for it.
 

A:Acer Aspire issues; Games no longer work

If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
 

http://www.techspot.com/community/topics/acer-aspire-issues-games-no-longer-work.208471/
Relevancy 16.77%

Hey, I'm a new member here with a problem!

I have a pair of Skullcandy Crushers with an arguably great built-in mic that turn on with a press of a button. However I built a new computer a few days ago and installed the latest version of the ASUS Realtek HD Audio manager, and while the audio on the headphones work, the mic refuses to work and isn't even recognized on programs like Skype and Hangouts.

I have tried the front two ports and tinkered with the settings and nothing has worked as of now, please help ASAP!

-Extabyte
 

A:Skullcandy Crusher mic not working with ASUS Realtek HD Audio Manager

Yeah thats because Skullcandys aren't really built for computers, just iPhone & Android. I had the same issue with my Skullcandy headphones and decided to buy a legit for PC headset. Sorry you spent your money on them!
 

http://www.techspot.com/community/topics/skullcandy-crusher-mic-not-working-with-asus-realtek-hd-audio-manager.204154/
Relevancy 16.77%

hi guys wish you all a great new year.

im facing a very annoying issue with my laptop, some keys are not working, the left **** and the windows key I just don't know whats happening.

can someone please help mw with that.

thanks in advance.
 

http://www.techspot.com/community/topics/dell-inspiron-7537-shift-and-windows-key-not-working.207933/
Relevancy 19.35%

Can I run 1600mhz ram on a mb which is supported 1333mhz (my config MSI-760gm P21-FX 1gb asus amd radeon 5450 gfx card And 4gb rm of 600mhz.
 

A:Can 1600mhz ddr3 ram will work on mb which is supported at 1333mhz?

1600 MHz RAM should down-clock to 1333MHz just fine, but I will not make guaranties. It usually works perfect, but there is always the possibility of incompatibilities.

The GPU memory and frequency is independent and irrelevant for this topic.
 

http://www.techspot.com/community/topics/can-1600mhz-ddr3-ram-will-work-on-mb-which-is-supported-at-1333mhz.207921/
Relevancy 19.35%

I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.

Any suggestions?
 

http://www.techspot.com/community/topics/i-hear-windows-startup-but-after-that-nothing-headphones-work-though.207890/
Relevancy 19.78%

Hi,

I installed win 7 x86 on a sony vaio vpceb36fg. Everything seems OK but the Fn keys. The combination of Fn+related keys work only for sound volume and screen lock button and not for others!

How to get all Fn keys worked please?
Is it needed to install any tool/utility?
 

A:Fn keys don't work

Your laptop came with Windows 7 Home Premium 64 bit so I'm curious as to why you decided to install a 32 bit version.

Laptops, particularly Vaios, have specific functions assigned to keys. On yours you were previously able to surf the web and play DVDs without booting up into Windows. To regain all that you've lost will take quite a bit of work. The utilities you need will be on a Sony support site. However, sometimes things have to be installed in a particular order before they work. It took me a long time Googling, downloading utilities and experimenting to get everything working when I reinstalled the OS on my Vaio.
 

http://www.techspot.com/community/topics/fn-keys-dont-work.207842/
Relevancy 17.63%

Sometimes when I'm skyping, I want to play audio so I enable my stereo mix. I got a new computer though so I had to re install the realtek high definition audio recording. I've tried using it, but it doesn't work. It says it's enabled and it's my default device, and no green bars pop up to indicate it's working either. Any help would be cool, thanks.
 

http://www.techspot.com/community/topics/stereo-mix-enabled-but-not-working.207783/
Relevancy 19.78%

Before I say anything else, I am very new to building a computer. Ive never built one in my life. I am curious if the setup I have to far will work! I am trying to look for pretty cheap but good options for parts. So far I have a case, processor, and GPU in mind. I need ideas for the motherboard especially. I dont know how to tell if everything would work correctly, so if something would be incompatible, could you tell me?

So far I have

GPU: Nvidia GTX 760
CPU: Intel Core i7-3770k
Case: NZXT Phantom 240 Mid Tower
Ram:
Motherboard:
Hard-Drive: Seagate Barracuda 2TB HDD
Power Supply:
DVD Drive:
Operating System: Windows 7 64 Bit
Monitor:

Would there be anything else I need? Also what is thermal compound and Heatsink? Are these required for my setup? Please tell me if there is anything wrong with this so far and what items I should use for the unfilled spaces! Thank you all so much!
 

http://www.techspot.com/community/topics/will-this-setup-work.207722/
Relevancy 17.63%

I'm doing a simple build for my parents and when I boot it up the monitor doesn't respond. Everything is hooked up properly and I've tried a different monitor.
Processor - i3-3240 with hd 2500 integrated graphics
Motherboard - ASRock H61MV-ITX
 

A:Integrated graphics not working

Issue resolved. Sorry I dont know how to delete the thread
 

http://www.techspot.com/community/topics/integrated-graphics-not-working.207495/
Relevancy 19.78%

I have a toshiba laptop right at a year of having it, it will not allow me to get internet connection even though it shows its getting wifi or set up through the router.. Is this a virus or other issue
 

A:Toshiba Internet won't work

Moving this topic to appropriate forum.
 

http://www.techspot.com/community/topics/toshiba-internet-wont-work.207422/
Relevancy 17.2%

I just purchased screen quot DELL U H quot and a new computer The happy unboxing time turned to a nightmare when the noob I am could not connect the screen to the computer like the guy is doing in the youtube video Thanls Screen Info http accessories us dell com sna productdetail aspx c us amp cs amp l en amp sku -BBCG What I am trying to do This guy is connecting his screens to each other than to the PC but I am unable to achieve it 3 station configure screen my working Can't My Computer Spec Asus ROG G Desktop PC i Can't configure my 3 screen working station GB TB NVIDIA GTX - CPU Intel Core i - M Cache up to GHz - VGA NVIDIA GTX GD - OS Windows - Memory G DDR MHz - Storage TB SATA G ASUS Can't configure my 3 screen working station westorage years - ODD Blu-Ray X Combo - LAN Mbps - Audio -channel Audio SonicMaster - Card readerN A - Front I O - USB x - Mic Port x - Earphone port x - back I O x RJ LAN x HDMI-Out - x channel Audio - x USB x USB - x Power jack - power supply WAdapter - certificates BSMI CB CE FCC UL CCC Energy Star VCCI Graphic Card Spec http www asus com Graphics Cards GTX PHOC GD specifications nbsp

A:Can't configure my 3 screen working station

As far as I can tell, Nvidia doesn't support Surround (three monitors) via daisy-chaining (the card in the video was AMD Radeon). You might be able to get two monitors to work like that - some sort of DisplayPort MST support was added a while ago because of tiled 4k displays - but to get them all working they need to be plugged to the card directly.

As GTX750 doesn't have proper connectors, you might need to change your graphics card to something that has three DP outputs or 2xDP + HDMI.
 

http://www.techspot.com/community/topics/cant-configure-my-3-screen-working-station.206802/
Relevancy 19.35%

Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.

I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.

I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.

Does anyone knows how I get back my wireless connection? Pleasee
 

A:WiFi doesn't work only with cable ethernet

Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
 

http://www.techspot.com/community/topics/wifi-doesnt-work-only-with-cable-ethernet.207136/
Relevancy 19.35%

Hi all I have to the WLAN work as rather Router on from a WiFi LAN a a typical situation in my Internet and LAN setup My ISP provides me with a direct LAN cable that I need to connect either into my PC or into the WiFi Router WLAN port I also have a LAN that I need to connect to so I have installed a separate LAN card for the internal LAN purposes My two setups are below with their issues I hope someone can suggest a middle grounds to have a LAN and a WiFi too Scenario The ISP cable goes into the WLAN port of the Router Cables from the router goes into my PC network card and to other PCs for LAN purposes The PC cards are all configured to automatic IP LAN Internet WiFi is now available This works fine for a few days and then the internet stops working because there is a conflict of IP The ISP expects IPs like xxx and the one on the LAN Router for my PC is Scenario Router to work as a WiFi on the LAN rather from a WLAN The ISP cable goes into network card internet sharing is enabled Router to work as a WiFi on the LAN rather from a WLAN and automatic IP with the ISP s expected IP xxx Another cable goes from my PC s network card fixed IP into the regular LAN port of the same Router Without any issues over the months the Internet works the LAN works other PCs have fixed IPs too etc but no Wifi Can I have best of both the worlds in such a situation I can t install a rd network card for sure as the slot on the mother board is limited Please advise Thanks in advance Bhavbhuti nbsp

A:Router to work as a WiFi on the LAN rather from a WLAN

Code:

Scenario-1
isp==>(wan)router-->PC card-1, et al (conflict 123.237,234.xxx v 192.168.1.100)

Scenario-2
ISP===->pc card-1
pc card-2==>router
scenario-1 is a configuration or firmware condition
scenario-2 is a real security issue and the primary PC is basically acting as a DMZ server and is at risk.
Here's my setup:
Code:

isp==(wan)router-1--- PCs in the same room
|
+---(lan)router-2(with wifi) - - - wifi connections in the den

configuration to make this work with full file/print sharing:
router-2:

disable DHCP in this router
setup all WiFi settings here
notice: router-2 wan slot is left empty to make this work
Router-1:

set LAN address of router one as you please (eg: 192.168.1.1 )

set an address reservation for router-2's MAC -> a fixed, constant IP address on that same subnet (eg 192.168.1.254)
set the DHCP range small (eg 2-32)
router-1 will control all auto-ip assignments for both routers.

Personally, I add another tweak;

reserve ip addresses for all of my devices into the low-end of the dhcp range (say 2-10) and
let 'guests' take addresses above 10
This gives the opportunity to allow file/print sharing to known systems (2-10) and disallow for the guests.

Setup totally within the routers allow my laptop to travel and not be effected by these choices.
 

http://www.techspot.com/community/topics/router-to-work-as-a-wifi-on-the-lan-rather-from-a-wlan.207258/
Relevancy 16.77%

Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp

A:Clean install Windows 7 - FN Keys (Touch/slider) not working

Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.

That'll teach you to mess with Windows when a cd/dvd plays up.
 

http://www.techspot.com/community/topics/clean-install-windows-7-fn-keys-touch-slider-not-working.207046/
Relevancy 19.35%

Well I am accessing my remote router via and it works access work via phone, Remote PC doesnt via ok when I am using my Phone s Remote access ok via phone, doesnt work via PC browser chrome or IE on Samsung however when I am at computer at work I cant access my router I ran Tracert and I am getting up to hoops and th says quot Request timed out quot lt ms lt ms ms lt ms lt ms lt ms lt ms lt ms lt ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms Remote access ok via phone, doesnt work via PC ms ms ms border ge - unitedair- chg pnap net ms ms ms core te - -bbnet chg pnap net ms ms ms ae - chi ip gtt net ms ms ms xe- - - chi ip gtt net ms ms ms c-eth- - - -pe ecermak il ibone comcast ms ms ms he- - - - -cr ecermak il ibone comcast ms ms ms ms ms ms te- - - - -sur mortongrove il chicago com net ms ms ms te- - -cdn mortongrove il chicago comcas t Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Trace complete Anyone would know why it works on the phone and doesnt really go through all the way to the end nbsp

A:Remote access ok via phone, doesnt work via PC

Ok I have to ask first when you are using your phone is it always using mobile data or do you connect it at work via wifi? When reason that makes sense to me is at your work they maybe blocking the remote port. I guess it all depends on what you are using also. If you are just using standard RDP then they might be blocking port 3389. If you could give further information on how you are connecting remotely whether using software such as teamviewer or just standard RDP. Also how do you have your router configured. I can better understand witht is information thanks....
 

http://www.techspot.com/community/topics/remote-access-ok-via-phone-doesnt-work-via-pc.206550/
Relevancy 17.63%

My wireless is not working on my computer, just a couple months ago I reset my computer using the ISO file, now my computer will only connect to the Ethernet cable. The wireless switch is on. I see a button near the VAIO button that shows a computer with signals coming off of it, I've tried pressing it but it doesn't do anything. Computer specs: VAIO Song Laptop with 6 GB Ram and 1 TB HDD.
 

A:Wireless network not working

Sounds like when you reset your computer the proper wireless drivers were not re-installed. I would start looking for a solution for this. What Operating System does it have (Windows 7 / Windows 8.1/ etc.)? Have you tried to remove the Wireless drivers and re-install those? How about downloading and installing updated drivers from the VAIO website?
 

http://www.techspot.com/community/topics/wireless-network-not-working.206511/
Relevancy 17.2%

I have bought JBL Speaker FLIP Model FHP 2 on 14th July 2014 but it worked for only 2 to 2.5 months thereafter not working anymore.
I have taken to SPAR Artee Industrial on 29/09/14 but they are not providing free replacement not they are able to repairs as Charging PIN has spoiled. THe part is not available locally. The JBP Speaker are not working at all now.

Kindly suggest, for the Customer Care Complaints I am unable to find the Customer Care/ Replacement Customer Care / Service Center / Top Management Contact numbers for getting help for repairs / replacement.
 

http://www.techspot.com/community/topics/jbl-speaker-not-working-in-just-2-months-time-period.206690/
Relevancy 19.78%

Hey guys

I have a problem with my laptop.
Sometimes the space bar, n and enter key stops working. When this happens, I can usually hit the button a few times and the key finally registers. It happens randomly and quite often. But sometimes I can type for hours without it happening.

I have not spilled any liquid on my laptop and I haven't dropped it. The problem started randomly a few months ago.
Does anyone know what could be causing this?

The laptop is an Asus K55V. It is nearly 3 years old

- Fred
 

A:Laptop keys sometimes don't work

Hey Fred,
Not sure if this might work that well, but give it a try! If it doesn't..go to a technician...its probably the best idea.

Shut down the laptop, removed battery and cable for a moment, press and hold the start button for 60 seconds... and replace the battery.. start the lap top.

Hope this helps!
 

http://www.techspot.com/community/topics/laptop-keys-sometimes-dont-work.205954/
Relevancy 17.63%

My old computer is crapping out and yes I know I need a new one. But in the meantime, it is telling me I have no soundcard. I am attaching my dxdiag report... Please help...
 

A:Sound card not working

Go to device manager and check if there is a yellow exclamation mark in there.
 

http://www.techspot.com/community/topics/sound-card-not-working.204903/
Relevancy 17.63%

I have a sennheiser HD 202 and I am not able to hear any sound from the right side. I have to hold the cable in a position rhen it works. So what shall do now? Is there any chance of bringing it to normal state?
 

A:Sennheiser HD 202 sound not working

It's probably one of the wires inside the headphone lead has broken.
Does the same problem happen on all devices you plug the headphones into?
Or just one thing, say your PC for instance? (could it be a laptop headphone socket?)
If the problem is with all devices, ipods, pc's etc, then it's the headphone lead broken inside. If you can solder small wires and parts, you could change the lead yourself, but if the headphones are less than a year old you should return them under guarantee.
 

http://www.techspot.com/community/topics/sennheiser-hd-202-sound-not-working.205645/
Relevancy 19.35%

What the title says. I bought a TP-Link WDR4300 and installed it, and everything works perfectly on every device except for my laptop (Windows 8.1 Lenovo G480, running Windows Defender as AV). When connecting wirelessly, I get access to the router, but it shows "limited", and it doesn't even let me get into the setup page (192.168.0.1) and when I ping it, every packet is lost. Ethernet, meanwhile, works perfectly. I'd appreciate any suggestions on how to fix it.

I'd like to attach the ipconfig outputs but my command prompt is in spanish and some of the characters are missing in the .txt file, too. I don't know how to get the file in english.

@jobeard I saw one thread you solved in which you said to mention you so you could help. I'd really appreciate it. Thanks beforehand for any and all suggestions.
 

A:WiFi doesn't work, Ethernet does

Hi, You will always have to use the ethernet (Cat 5) cable to get into your router's software, at 192.168.0.1, all routers are set up like that for security reasons.
It's done that way so that no one can change your settings, passwords etc using a wireless connection, you must use the Cat 5 cable to make setup & security changes.
Did you get any setup software with the TP Link router?
If you get good internet access using Windows 8.1 using the ethernet cable, it
might point to possible wireless driver issues.
It might be worth downloading the latest driver for your WDR4300 from the TP-link website;
http://www.tp-link.es/support/download/?model=TL-WDR4300&version=V1
 

http://www.techspot.com/community/topics/wifi-doesnt-work-ethernet-does.205530/
Relevancy 17.63%

Okay, so yesterday I was dropped off for my first day at Uni and I went into my room to set up my laptop. Somehow (truly a mystery) a single tear fell onto my keyboard, right in the gap below the space bar. Obviously, I thought nothing of it... for about a minute. Then suddenly my keyboard went absolutely crazy. The space bar stopped working and when I tried to type with any other key, weird stuff happened. For example, I would type "B" and instead it would come up as "###O'xnF."

As you can imagine, very weird. I left it for a little bit while I unpacked and when I came back to it, it seemed to have settled down, but some of the keys had stopped working all together. These include the space bar, the z, the s, the shift key, the left alt key etc. Basically, several on the left side of the space bar. I am having to use a USB keyboard but obviously I would rather not have to.

Does anyone know how to fix it, or should I lug it over to the nearest computer repairs place?
 

A:Laptop keys not working

"Does anyone know how to fix it, or should I lug it over to the nearest computer repairs place?"... Tears contain salt, salt is corrosive. Yes, take it to a repair place and tell them what you told us
 

http://www.techspot.com/community/topics/laptop-keys-not-working.205454/
Relevancy 17.63%

Hi, can someone help me get my Soundblaster Zx beamforming mic to work as it is advertised to please. People can hear my game in the background and they shouldn't be able to.

I'm running Windows 8 64 bit.

Thanks
 

A:Soundblaster Zx Mic not working as described

Just to confirm, have you enable beam-forming in mic properties?

go to sound control panel, select recording devices, then highlight your soundblaster and right click to properties and find enhancement tabs. alternatively you might also want to try "setup microphone" inside windows. im not sure what it is named in windows 8, but in windows 7 that's what you need to type inside the start search box.
 

http://www.techspot.com/community/topics/soundblaster-zx-mic-not-working-as-described.204584/
Relevancy 17.2%

I bought new computer 1 year ago and everything went really nice until 10 days ago my graphic card fan stops working at times. At first I didn't know what was going on but I decided to open my case and start playing some really required game like WatchDogs and I noticed this. The fan stops working only when I play games. I updated my drivers but that didn't solve anything. I don't know why this is happening or how to fix it. I can tell when the computer is going to shut it self down because of overheating so I quickly alt+f4 my game whenever I see its going to happen. And I stare at the fan hoping that it will start working on it self again. I try to push it with my fingers but it wont continue. Only after 5-10 minutes pass I can move it with my fingers and it will start spining again.

What do I do?
 

A:Graphic card fan stops working.

When the fan is spining everything is working fine. And when it start spining again the temperature goes down fast.
 

http://www.techspot.com/community/topics/graphic-card-fan-stops-working.205181/
Relevancy 19.35%

My internet wont work, ive tried using both crome and IE but both browsers say that I am not connected to the internet despite the fact my computer says that I am connected to the internet. I know its not a network problem because my other devices are connecting fine. Also I tried connecting to the wifi at home and at school and it still does not work. My laptop is a HP ProBook 6390b and I am using windows 7. This problem started occurring after about 4 months disuse of my laptop which I think might be a factor as to why its not working. I have run windows updater and run a scan with my antivirus but still nothing helps. Thank you for any assistance in advance.
 

A:Internet wont work on laptop

Have you kept up and installed all the Windows 7 updates and are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/internet-wont-work-on-laptop.204944/
Relevancy 19.78%

I got a hp 6371it

link --> (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02054227&tmp_track_link=ot_faqs/top_issues/it_i...

I have this problem: I bought a kingston Dimm ValueRam 4GB DDR3 1333MHz Non-ECC CL9 (it is compatible with my mb according to hp website). I installed it on my pc and:
1) if I install just that ram it works fine
2) if I install that ram I bought and one ore both ram I had already installed in my pc it doens't work or it blocks on hp main screen or it appears the classic blue screen of hardware error and it never enter on windows (it asks for a system reinstallation)
what is the problem? should I do something else? I tried mounting rams in different slots, I tried everything

please help!!
 

A:Compatible ram don't work

Sound as though the ram you bought is not compatible with the existing ram. Is the ram you bought the same specs as the old ram?
 

http://www.techspot.com/community/topics/compatible-ram-dont-work.205230/
Relevancy 15.05%

About a week ago, our cable internet connection went out. Before I had a chance to reboot the modem & router, my 11 year old decided to completely reset the router to factory settings! Ugh! This caused several issues: my home network is now gone, only a unsecured factory network is available. When I try to plug my laptop into the router via ethernet cord (in order to login to router and setup secure network) my computer will not recognize the router and won't connect to internet. I tried troubleshooting with my cable provider and they say it's in my computer (IP address will not reset) and he recommended I replace my network card. However, today when I brought my laptop to work, it will instantly recognize the wifi at work. So is it really my network card that is causing issues? Please help, I'm desperate and not tech too tech savvy!

Details:
Linksys wireless router
Charter cable modem
Hp pavillion dv6 laptop with Windows Vista OS
 

A:Laptop won't connect to home wifi but will connect to work wifi

Did you figure this out?
 

http://www.techspot.com/community/topics/laptop-wont-connect-to-home-wifi-but-will-connect-to-work-wifi.204978/
Relevancy 18.92%

Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
 

A:Audio wont work on asus x53u laptop

Did you fix this?
 

http://www.techspot.com/community/topics/audio-wont-work-on-asus-x53u-laptop.204577/
Relevancy 17.63%

I have this flash drive:
http://www.amazon.com/PNY-Turbo-Performance-Drive-P-FD128TBOP-GE/dp/B00FE2N1WS

And I am afraid it is dead. When I plug it in, 50% of the time, the red light constantly flashes at about 8 flashes a second, or flashes 3-4 times quickly before just shutting off and nothing happens.

If it is in constant flashing mode, I can open my windows explorer and see "Removable disk", however it is slightly transparent, and when I try to open it, it says "Please insert a drive", which leads me to believe the computer detects it, but can't read it. The properties window shows 0 bytes. Is there any hope at all of getting my ~65gb of used data off of this thing at all? Do I have to take it apart and do some soldering? Please help.
 

A:PNY 128 GB Flash Drive not working

Your flash drive probably has a damaged controller. If that data is important, best chance of retrieving your data would be a professional data recovery service. The cost of recovery depends on how extent is the damage of your disk.
 

http://www.techspot.com/community/topics/pny-128-gb-flash-drive-not-working.204524/
Relevancy 16.77%

My year old ACER Aspire keyboard just stop working in a couple of capacities First the numbers on the key wouldn t type at all Checked Num Lock fine then stopped some thing... Laptop working wrong the type and keys tried to type numbers at top of keyboard well some typed the right number but most didn t or typed more than one number Ran Webroot Anti-spyware and Anti-Virus clean Then I shook my computer to see if any crumbs or foreign materials were throwing something off clean Took out battery nada Restored computer to the day before any problems Changed nothing Pressed every Laptop keys stopped working and some type the wrong thing... key to see if something was stuck or key broken None The Delete Backspace Enter and Space Bar do NOT work at all So basically the entire keyboard is not working due Laptop keys stopped working and some type the wrong thing... to something If I type any one key some of them type what I wanted but continue to type the letter or number until I log out of my Google Engine I have always had issues with the keyboard I will be typing along and the cursor will randomly go back to previous sentences and start typing what I am currently typing It is so annoying Why is it hopping all over the place A computer major friend who teaches computer classes said to write to Google and maybe I would find others with similar problems I found several quot sticky keys quot problems but none on point with none of the keys working or working properly He suggested perhaps a Trojan Horse virus but my sweeps come up clean Can anyone help me Thank you Shawnascy nbsp

A:Laptop keys stopped working and some type the wrong thing...

It could be a virus. But It also could just be your keyboard is bad. You may need to take it to your local repair shop if it. Is a laptop and have them check the keyboard out for you. I really do not think it is a virus.
 

http://www.techspot.com/community/topics/laptop-keys-stopped-working-and-some-type-the-wrong-thing.204613/
Relevancy 17.2%

Hello!
About a year ago, the newest monitor for our home's main computer stopped functioning, so it had stopped being used. However, today I was in search of some files I needed that were on our old main computer, so I hooked up the old monitor that came with that computer and it didn't work as well. (The old monitor worked on a different computer). I tried hooking up a few other spare monitors to the old computer, but it they also did not work either. I came to the conclusion that the monitor input had crashed.

So, here's my question: Is it possible to use a KVM switch to display the old computers monitor display on my laptop to get access to my files, even without the old computer's monitor input functioning?
 

http://www.techspot.com/community/topics/kvm-switch-no-working-monitor-input.204590/
Relevancy 19.35%

Hi, hope I've put enough specs in profile for you to help. I have a Compaq Presario 6735s I bought around 2008. CPU quite slow but graphics card not bad so made decision to upgrade. Looked up the laptop manual here to find compatible CPUs for motherboard, socket type etc. Went through 3 different (*****ic) buys before I found one that actually fitted.
Now with everything reassembled, screen will flash up once upon powering on, then nothing. All usual lights come on, even my wireless connects, makes usual start up noises, fan, dvd drive etc ....
Proceeded to take everything apart again, re-connected everything I tampered with. Even RAM, which I didn't have to remove before.
Still same reaction starting up.

Really frustrated with myself as thought this would be the right one. Could honestly cry, haha.

I read the tutorial on here called 'No POST' to no avail either. I really hope it can come back from this.
One last thing I can think of (before pulling new CPU out) is upgrading BIOS to support new CPU but with no screen I am stuck.

Can someone please give me a little direction?
 

A:Upgraded CPU on laptop, now screen won't work

Did you re-install the old CPU to see if the laptop booted normally again? Upgrading CPU's on laptop motherboards can be a very difficult thing to do. What is supposed to be compatible in reality is not
 

http://www.techspot.com/community/topics/upgraded-cpu-on-laptop-now-screen-wont-work.204383/
Relevancy 19.35%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 19.78%

So currently I have a modem in the living room Cisco EPC and then it goes all the way to my room to a Cisco WRTG V router Yesterday out of the blue it stopped working This is because I previously had routers in the network Asus and Cisco anyways I decided to disconnect my asus and use only the cisco but the router just won t work I reseted it to it s fabric settings But when I log into it it says the router s IP adress is And hands out IP adresses to my pc such as I have no idea what to do Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search Router work won't properly List sbb rs Ethernet adapter Local Area Connection Connection-specific DNS Suffix sbb rs Description Intel R V Gigabit Network Connectio n Physical Address - B- - Router won't work properly -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local Router won't work properly IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Wednesday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter isatap sbb rs Media State Media disconnected Connection-specific DNS Suffix sbb rs Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d abd e a Pref erred Link-local IPv Address fe e a Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter TO Adapter Connection-specific DNS Suffix sbb rs Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ebd bbaa ebd bbaa Preferred Default Gateway c c DNS Servers NetBIOS over Tcpip Disabled C Users MiKi gt This is my ipconfig with the modem and this is with my router Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Intel R V Gigabit Network Connectio n Physical Address - B- - -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Thursday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BE - - BA - E- B A F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C Users MiKi gt nbsp

A:Router won't work properly

Have you tried pressing the reset button on the router? (long press)
I have seen this 'reset button' on several router brands/models like tp-link (tl-wr941n, tl-wr740n old version, tl-wr740n newer version), buffalo draft-N routers, cdrking routers (made in china router brand sold in the Philippines).

if the reset process I described is the same as what you typed in your first post, try to manually change the router ip address.

my wimax modem ip address = 192.168.1.1
so for the tp-link wr-740 router, I use ip address - 192.168.0.1

login to your router and change it. if there's any save button, click it. my router prompts me to reboot the router. after a few seconds, the preferred ip address I have chosen is good for use.
(I have hidden my MAC address)
 

http://www.techspot.com/community/topics/router-wont-work-properly.203477/
Relevancy 17.2%

Replaced the mobo (Gigabyte GA-78LMT-USB3), CPU (AMD FX-4300 Vishera), and RAM (G-Skill RipJaws 4MBx2) in an older system running WinXP (planning to upgrade to Win7 ASAP). Everything booted up just fine, but the HP keyboard and the Logitech mouse, both of which which work fine on another computer, aren't being recognized at all by the computer. No error messages, just not working. Not even lighting up. We've tried every USB port on the system, and even used a USB-PS/2 adapter to try it that way, to no avail. I'm out of things to try. My only thoughts:

1. Could USB be disabled in BIOS by default? If so, how do I change that without a keyboard and mouse, when I can't even access the BIOS?

2, Could the USB system on the new motherboard be defective? How do I test that?

3. Is there any possibility at all that it's related to the Antec 500W PSU--perhaps not enough wattage for this system? (Hard drives are all pretty old.)
 

A:USB keyboard and mouse not working after upgrade

Create and boot from a Knoppix Live CD (just google to find and download the ISO). If USB still doesn't work when you boot from knoppix, you know it must be either hardware or BIOS issue.
 

http://www.techspot.com/community/topics/usb-keyboard-and-mouse-not-working-after-upgrade.203285/
Relevancy 19.35%

Hi everyone,
I've bought a Sound Blaster Recon 3D a year ago.
It works awsome ! But this morning it was off the light and cannot work while plug in any computers.
I am very bored and nervous, I think it was broken down and cannot work anymore.
Am I right ?
Please say NO and help me
Thank you very much.
 

http://www.techspot.com/community/topics/my-sound-blaster-wirless-doesnt-work.202270/
Relevancy 19.35%

Hello My sound chip on my board was blew for no reason bad thing only being a month old bored and I am not waiting days to rma it and for me to get it back anyway I managed to pick up a old sound card not sure on the model Motherboard? Work. Not Maybe Did Sound Card that worked fine for three days then stopped outputing audio so I bought a sound card intex cmi that did not have the bit wndows dirvers and everytime I turned the computer off the machine would not detect the card I then I have to press the reset button or turn the system a few times to get the card to be recognized again and I could not also find the drivers for the OS Sound Card Did Not Work. Maybe Motherboard? I checked at the back of the cards box and it says bit pci bus master What does the mean could that be that the card was not compatible for the stystem or could it be the motherboard I tried a nvidia video card in the Sound Card Did Not Work. Maybe Motherboard? PCI-E slot and the card works fine with no faults The sound card was using the PCI slot and I tried every PCI slot My Motherboard asrock fm a x extreme Thanks nbsp

A:Sound Card Did Not Work. Maybe Motherboard?

I tested in a very old card from 2001 or 2004 something like that and it appears there's power going through the card so that's the plus.
Maybe it's because I'm using old crap and the sound card model is old?
 

http://www.techspot.com/community/topics/sound-card-did-not-work-maybe-motherboard.202240/
Relevancy 17.2%

Greetings reader

So im using a Radeon HD 6870 in my MSI 890gxm-g65.
Installed the hardware and when I run it on on-board graphics, windows is able to detect it as ATI Radeon HD 6800 Series. But after installing the driver for the 6870 it asks for a restart.
The BIOS screen is visible but after the windows loading screen the display just goes off, the LCD in on but it's just black screen.

I have a lot of work to do, so ill be really grateful if someone is willing to help me.

Thank You
in advance.
 

http://www.techspot.com/community/topics/hd-6870-not-working-after-installing-driver.202017/
Relevancy 17.63%

I accidentally deleted IDT audio from the contol panel. Because of this, the audio is not working. Therefore, I tried downloading it again but my laptop responded with [error, declined, your computer does not reach the requirement ect]
Just to clarify I have a hp laptop windows 7.
 

A:Audio is not working

It could be the driver you downloaded not compatible to your system.... are you using 32bit or 64bit? if you are using 32bit then download only driver for your audio according to their compatibility..likewise in 64bit..
 

http://www.techspot.com/community/topics/audio-is-not-working.201819/
Relevancy 17.63%

Greetings all The DVD RW drive on my HP Pavilion dv series us is not working Please find the relevant details below The drive is Model TS-L N HPMH - I think this is Toshiba It s detected in My Computer as HD-DVD ROM When I try to play a CD DVD the light comes on and spins but then shows quot Please insert drive not as DVD ROM CD working - shown a disk into HD DVD-ROM Drive F quot DVD drive shown as CD ROM - not working The Device Manager detects it DVD drive shown as CD ROM - not working as a CD ROM and obviously the Windows generic driver doesn t work The Device Manager picks it up as an quot Unknown Device quot and is shown as quot NCB XYB QNKX SCSI CdRom Drive quot The driver is not available on the HP site so tried the regedit option I believe I deleted all the strings associated with the driver key Then tried the Microsoft tool which must have installed the generic driver which causes the DVD drive to be recognised as a CD ROM instead I tried the sfc scannow as well and it shows that there are corrupt files which could not be fixed The laptop works well otherwise Please help Where can I find the driver for the drive How can I go about fixing this issue nbsp

A:DVD drive shown as CD ROM - not working

List any Problem devices

Make sure devices are connected and powered on
Click the Start Orb, type msinfo32 in the search box. Hit Enter
Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so

 

http://www.techspot.com/community/topics/dvd-drive-shown-as-cd-rom-not-working.201725/
Relevancy 19.35%

My laptop doesn't work with wifi when I first open it. It will show at the bottom of the screen that it is fully connected and has full bars, but when I open the internet the pages will not open. I must restart the computer and then it will work. How can I fix this?
 

A:Laptop doesn't work with wifi

When the WiFi is active, the laptop NIC should be disabled - - easy - - just unplug the the cable to the router.
 

http://www.techspot.com/community/topics/laptop-doesnt-work-with-wifi.201724/
Relevancy 17.2%

My scrolling up and down option of touch pad is not working what should I do...?
 

A:My laptop touchpad is not working properly

Are you referring to the the right side scroll bars on laptop touch pads that allow you to scroll up and down pages?

Try updating the driver for your touchpad and see if that helps.
 

http://www.techspot.com/community/topics/my-laptop-touchpad-is-not-working-properly.201621/
Relevancy 17.2%

I recently purchased a Supermicro SuperWorkstation A- and am having problems getting the audio to work I installed Windows Pro and the Motherboard has built in Realtek ALC audio I did install the latest drivers that Supermicro has for the ALC I have one green plug that Supermicro Not Working Audio Workstation runs speakers and subwoofer I have that plugged into the Supermicro Workstation Audio Not Working green plug on the back of the computer In the Realtek HD Audio Manager the SPEAKERS Tab is check as the default device In the SOUND window Speakers are also checked as the Default device When I play some music the green bar moves up and down in the SOUND window and in the VOLUME MIXER window So the speakers have been detected when I plugged them in and it is showing that the built in Audio is working but no sound is coming out Any ideas on this Supermicro may eventually solve this problem but I really want to get on with this using this computer now When I installed the Drivers for the NVIDIA Quadro K Graphics Card it also seems to have installed some NVIDIA High Definition Audio Drivers It doesn t seem to help when I disable them Also I noticed lots of people talking about not seeing the SPEAKERS tab in these forums I was also having that problem The computer seemed to quit detecting when anything was plugged in so the tab never came up I finally figured out how to fix that problem though To get the SPEAKERS Tab to reappear you go to the right had side of the Realtek HD Audio Manager window and click on the little folder icon A CONNECTORS SETTINGS Window pops up and there is a box you can check for Enabling auto popup dialog when device has been plugged in You need to uncheck that box and click OK You then go back to that folder and recheck that box and click OK again The Speakers tab should now appear when you plug in something nbsp

A:Supermicro Workstation Audio Not Working

The next time my computer rebooted the Speakers Tab once again disappeared and there is nothing I can do that will bring it back! *sigh*
 

http://www.techspot.com/community/topics/supermicro-workstation-audio-not-working.201241/
Relevancy 19.35%

I hope this is the right section to ask this question in. I'm a big newbie.
I'm having an issue that I have no clue how to solve. There is a specific webpage that I try to view at home with my laptop, and it never loads on Chrome and Firefox, but does on Explorer. But when I take the same laptop to work or school, it does load that website on all browsers. I also have a desktop that stays home, and has the same problem. Its so strange. I don't know if it's a network thing, or an facebook app thing.

I've tried re-installing Chrome, deleting all cookies and caches, disabling all extensions or plugins, and updating Flash and Java. Any ideas?

Mod Note: Facebook game link removed, you are too new to be trusted fully. Problem m ay be solvable without the exact game anyway.
 

http://www.techspot.com/community/topics/website-works-at-work-not-home.201025/
Relevancy 17.2%

Hey guys I had some contractors doing some work on my house today and they needed to shut the circuit off to the room my computer was in The computer was on at the time so it shut off when the power was cut Now it won t go back on Power button does nothing at all and I don t know if it s the power supply mobo or switch I ve got a power supply tester which causes my computers fans to start up when it s plugged in so the power supply does respond not Power mobo button working... issue? The results are in the attached file It shows LL which means to low to register voltage for the - V line I honestly don t know if I even have that line so I don t know if that s bad I attached the label on my power supply too Would Power button not working... mobo issue? no voltage cause a computer to completely not respond Because the fans DO start up when the power supply tester is plugged in I don t think the switch is the problem because I tried to short the power switch jumpers with a paper clip and nothing happened I also took the CMOS battery out for a while and then tried it again and that didn t work Any ideas on whether I need a mobo or a power supply I don t have an extra PSU around to test with but I may try to find one before ordering a new mobo thanks in advance -mike nbsp

A:Power button not working... mobo issue?

Not the switch. Could be the motherboard or PSU, but I don't have any good insight.

I would unplug the PSU and flip the 120/240V switch to 240V, then flip it back before plugging it in. To me, this doesn't make any logical sense, but over about 16 years of playing with PCs I have seen it work twice.
 

http://www.techspot.com/community/topics/power-button-not-working-mobo-issue.201009/
Relevancy 17.2%

Hi,
Dears,
I have a problem with my Dell E6500. Sometimes during working it held, so I turned it off forcefully by on/off button. after it, when I try to turn it on, it turn on (just lights on, does not show display) and then turned off.
I consult with a frined. he tell me a way. "eject off its RAM, Battery and cell (storing time)ejector from motherboard and leave it as it for 2 hours. then put RAM, CELL and battery and try to on."

I have done it, it starts and worked fine for 15 days, then again I face same problem, I again repear the process, it turned on again but now I failed to start it on.

what problem it really have, Any suggesstion advice Plzzzzzzzzzzzz.
waiting............
 

A:Dell E6500 held sometimes during working

Check temperatures. Maybe too high.
Run Dell diagnostics.

 

http://www.techspot.com/community/topics/dell-e6500-held-sometimes-during-working.200924/
Relevancy 17.2%

Hello I got a weird one for you guys and I literally have tried everything can think of so I am hoping someone has some new fresh ideas I have a Dell Latitude E that can no longer connect via wired or wireless connections Both adapters display yellow exclamation marks next to them and in the properties of both adapters says Windows cannot install because the drivers are not recognized Error Both adapters are also missing from the adapter page in network settings I have download the most recent versions of the driver and installed no luck I have downloaded previous version of the driver from dell and installed no luck I download the driver directly from Intel and installed no luck Tried a BIOS update nothing Tried to reset to defaults nothing So I decided I would rebuild the is one Windows 31, not NICs weird Error this working 7 machine and SURPRISE that worked for a week and then the problem started again So my first thought is well maybe its a bad motherboard so I swapped the HDD with another Dell E boot it up and NICs not working Windows 7 Error 31, this one is weird both connections are working In the laptop with the drive from the bad laptop it can no longer connect now so the problem is related to windows and follows the drive Does anybody have any idea whats happening hear I am all tapped out of ideas Thanks let me know if you need any additional info Dell E Windows Enterprise auretsky vailresorts com nbsp

A:NICs not working Windows 7 Error 31, this one is weird

"so the problem is related to windows and follows the drive"... Re-install Windows on this drive. Error 31 relates to a bad driver that may be reflected in the device manager
 

http://www.techspot.com/community/topics/nics-not-working-windows-7-error-31-this-one-is-weird.200795/
Relevancy 17.2%

So I just got me new PSU and my GTX 760. I started setting everything up, and decided to test the PSU, I plug everything in and the fan spins but only for a second and then stopped. I tried everything and it sill does not work, I used my old 400w psu and everything booted.

Could it be that my motherboard does not support the ATX 12 v2.3?
I believe my motherboard is an ATX 12 v 1.
Or just faulty PSU?
I cant use my GTX 760 on my old PSU because it does not support the pciE plugs. Hopefully sombody can help me. What could be the problem?
Motherboard ASRock H61m-dgs
Processor i5-2300 @2.8ghz
Memory 8gb
Video Card # 1 gtx 650 ti superclocked
Hard Drive # 1 200gb
Optical Drive # 1 none
Power Supply Corsair CX500 500w. and the old one
Monitor benQ
Operating System Windows 7 64bit
 

Relevancy 17.2%

Earlier today the wifi suddenly stopped working while I was online. I wasn't doing anything extensive, just browsing. The ethernet cable works just fine so I know it's not the internet itself just the wifi. Also, it's not my laptop as another laptop and kindle are unable to connect as well through the wifi but the other laptop can also connect through the ethernet. Is there anything I can do to try to get it working or is the router just burnt out and I need a new one? It's a few years old, a Cisco brand. Thanks.
 

A:Wifi not working but ethernet does (not laptop)

Try to log in the administrator on your cisco router try to find out if the wireless setting is change or disable...
 

http://www.techspot.com/community/topics/wifi-not-working-but-ethernet-does-not-laptop.200709/
Relevancy 17.2%

I recently bought a powerline adapter to combat my slow wireless speeds and planned on using it for my PC and XBOX 360 when I occasionally use it. The PC install was easy, it was plug and play no problems just installed the latest MSI ethernet drivers and BAM! Wired network, no problem, but today I come home and I felt like playing some GTA Online, so I unplugged the cable from my PC and into the XBOX and it can't connect. I am using a TP-Link AV500 Nano powerline adapter and a BT Home Hub 4 router. I also made a quick video to demonstrate my problem. As mentioned in the video I can use the internet just fine on my PC, the only problem is with the XBOX. Thanks again -hopgop1 NOTE: Video uploaded to YouTube as for some reason TechSpot doesn't support .3GP so I converted it to .MP4 and it doesn't support that either =[ link
 

A:Powerline adapter not working on Xbox 360

Have you seen whether the powerline adapter is compatible to XBOX.
 

http://www.techspot.com/community/topics/powerline-adapter-not-working-on-xbox-360.200440/
Relevancy 17.63%

This is my first post But I have a problem I do everything that portforward com tells me but it just doesn t work and when I type in cmd quot ipconfig quot it shows a different thing than it is suppose to be Ok this is what It says when I type in quot ipconfig quot to cmd C Users gt ipconfig Windows IP Configuration Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Home Link-local IPv Address fe f d cd b IPv Address Subnet Mask Default Gateway Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Ethernet adapter Hamachi Connection-specific DNS Suffix IPv Address b c Link-local IPv Address fe e d a d d IPv Address Subnet Mask Default Gateway Tunnel adapter Local Area Connection Connection-specific DNS Suffix IPv Address e ce f b f ff Link-local IPv Address fe ce f b f ff fefa Default Gateway Tunnel adapter isatap Home Media State Media disconnected Connection-specific DNS Suffix Home Tunnel adapter TO Adapter Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter isatap D D A- Port forwarding working not :( F- A - - AF B A CF Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter isatap A F DB -E E- -B A - E BD Media Port forwarding not working :( State Media disconnected Connection-specific DNS Suffix Port forwarding not working :( Tunnel adapter Reusable Microsoft To Adapter Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix This Port forwarding not working :( is what it says when I type the default gateway it has provided me into google chrome Oops Google Chrome could not connect to Suggestions Try reloading Search on Google I know what the default gateway is but when I go on it and portforward it just doesn t work I downloaded the port-checker and this is what it said Your External Ip Adress Your external ip adress is quot myip quot Ping Result We were able to ping your router Port Check Result Your port is NOT OPEN or not reachable I was portforwarding awhile back and the way I fixed this was plugging my laptop into a ethernet cable but we moved house and the closest ethernet cable is in the kitchen which is stories down and I don t want to keep my laptop down there to run the server This is what the router says GATEWAY IP Address Subnet Mask DHCP Server Enabled Firewall Disabled UPnP Enabled Wireless Disabled By the way this router is a smc wbra So can you please help Btw I am trying to run a minecraft server Here s a screenshot of the portforwarding http prntscr com bacbg nbsp

A:Port forwarding not working :(

This is EXACLTY what is happening to me and it makes me SO mad. I also need help with this problem.
 

http://www.techspot.com/community/topics/port-forwarding-not-working.182343/
Relevancy 17.63%

Hi, so basically I am using a windows 7 computer, and my WiFi doesn't seem to be working. To be exact, my Ethernet cable is working but my wireless isn't... before (a few days ago) it seemed to be working when I restart my computer, or just simply restart my router. But now, when I've tried it about 10 times, the WiFi is still not working :/

Thanks for the help
 

A:My ethernet is working but internet isn't

What is this computers make and model?
 

http://www.techspot.com/community/topics/my-ethernet-is-working-but-internet-isnt.200381/
Relevancy 17.2%

My wi-fi is connected and says I have a strong connection however whenever I open up either Internet Explorer or Chrome, both say there is no internet connection.

This has been like this for about 25 minutes now. Prior to this, I was having issues with internet for the past day and a half. It would say I was connected but had no internet access. After removing a trojan and some malware that Norton didn't let me know about and getting rid of some of the programs I no longer use (including Norton), I now had internet access showing and it's a strong connection. UNFORTUNATELY, I can't even use the internet I apparently have access to. I've uninstalled and reinstalled drivers, I've disconnected and reconnected.

Baby steps I suppose, but now I've hit a road block. I feel like I've done everything possible but what would you guys say? Anything else I could try?

EDIT: I suppose I should mention its a Toshiba Laptop with Windows 7
 

A:Wifi Connected but Internet isn't working?

Update: I've even gone in and deleted myself from the router, assigned a new ip to my computer through the router, and reset anything and everything that could be reset. this is getting ridiculous. Can anyone help me?
 

http://www.techspot.com/community/topics/wifi-connected-but-internet-isnt-working.200450/
Relevancy 17.2%

Hello,
Sorry if started this in the wrong category but I am needing to setup 3 monitors to my desktop for work purposes. My motherboard is a gigabyte h55m-s2h it has a vga port dvi port and hdmi port. I have a monitor plugged into each port but the monitor that is plugged into the dvi port is not seen and the monitor it self displays "no signal" when powered on. In windows screen resolution it shows my monitors that are connected to my hdmi port and my vga port. Any help would be greatly appreciated.
Thank you
 

A:Triple monitor on Gigabyte H55M-S2H not working

The problem is that the Graphics card on the chip does not support 3 Monitor outputs which is why you cannot do that. You will need an add on GPU to do so on this machine.
 

http://www.techspot.com/community/topics/triple-monitor-on-gigabyte-h55m-s2h-not-working.200253/
Relevancy 19.35%

Hello! I live in a college apartment (so no access to router). When I hook up my ethernet cable to my computer, all of my messengers work and are connected but I cannot use internet browsers. I recently reformatted my computer and was using a wireless adaptor, but here the internet is so slow that there's really no point and for a decent connection you need to be plugged into the wall. The wall connection worked fine until I reformatted.

This happened before when I moved to my first college and had to use the ethernet cable. I've done everything from messing around with internet explorer proxy settings and whatnot, but what did work was something I found in a thread. It instructed me to go somewhere and delete a file that was blocking the internet part, I guess? I deleted this setting/file and the ethernet connection worked just fine afterwards. I can't find this thread (probably not on this website) anymore. Does anyone here know possibly what the file was?
 

A:Help locating a file to help my ethernet work again

Check for optional Windows Updates, specifically a network driver. The most common name is Realtek.

And/or try installing this driver. - Software: Drivers & Utilities

If still no go, which computer do you have?
 

http://www.techspot.com/community/topics/help-locating-a-file-to-help-my-ethernet-work-again.200022/
Relevancy 17.2%

The model of my laptop is Toshiba Satellite L645.
I have encountered overheat issues recently and I thought it was the dust that clogged around the fan. I did the clean up and up everything back. I manage to boot up the computer and reach the window dekstop but the fan spin up for one or half seconds then stop.. Somehow, after a while, the fan worked and spin for quite sometimes.. Then again, the fan spin up for one or half seconds then stop and eventually my laptop overheat again.

IS the problem arises from the fan itself, or the thermal sensor problem? Im not sure.. pls help me =(
 

A:Laptop heatsink fan randomly stop working

I would replace the fan first, it is cheaper than a motherboard and laptop fans are known to fail. You can get the fan on EBay cheaper...
http://www.ebay.com/sch/I.html?_trk...toshiba+satellite+l645+fan&_sacat=0&_from=R40
 

http://www.techspot.com/community/topics/laptop-heatsink-fan-randomly-stop-working.200017/
Relevancy 34.83%

I m sorry if this is in the wrong 3 laptop on Many with issues month place - I d really really appreciate some help though I have a month old Toshiba Satellite A couple of weeks ago after Many issues with 3 month on laptop a Windows Update it went a bit wonky saying there were corrupt files I ran sfc scannow it found some things but couldn t fix them I did chkdsk and sfc a couple more times after which it said all was okay but the Windows Update Troubleshooter thing still said there were corrupt files and I was getting the odd error Many issues with 3 month on laptop and a few warnings in event viewer Sick of fiddling with the thing I did system refresh - after which all seemed okay for a few days during which I chose to not look at event viewer - partly cause I was getting too stressed with it and partly in the hopes that after the refresh then having to install about updates I d give it some time Many issues with 3 month on laptop to calm down or something Yesterday - I noticed everything was running rather slow so I rebooted the machine then everything was running extremely slowly I checked task manager and it said disk use and RAM use although nothing was running save a webpage and task manager I was advised that the Skype app which came pre-installed on the machine has never had issues before and I have used all of once was causing some problems so I uninstalled that I ran Avast anti virus scan nothing found I tried to run sfc scan but it said quot another servicing or repair operation is currently running Wait for this to finish then run sfc again quot Not a clue what that might have been I tried a few times wouldn t run At this point I gave in for the night Today I have ran sfc scan - nothing found Usage for disk RAM and CPU are still high although varying a lot Disk was even down at for a while earlier I notice that Google Chrome is in the Task Manager times I don t think this is normal I have one window open only One of the listings is for the Chrome app which I am not using Avast is in there twice once with the logo and once without I don t know if that means anything About times so far today my cursor has frozen for a few seconds There are a few errors and warnings in event viewer I have a copy of this on skydrive and can put a link on here if anyone wants to see it In brief the warnings are ESENT which viewer says is likely due to hardware problem yay ESENT again says probably hardware Kernel-PnP x DNS Client Events The errors are Service Control Manager terminated unexpectedly Application Error TrustedInstaller exe x Application Hang for wwahost exe and LiveComm exe x DistributedCOM x Apps Those are all the ones since yesterday morning Sorry if that s too much info or not enough I d be very grateful for any help - a new laptop shouldn t be this much hassle I phoned the Toshiba number as it s under warranty only for the guy to tell me he would have advised me to do anti virus scan sfc scan then check task manager - all of which I d already done and if I wanted more in-depth advice I could sign up for extended warranty for a one-off easy payment of just Swines Thank you very very much in advance I can t tell you how grateful I will be if this can get sorted If restore to factory settings thing will magically fix everything then just give me the word and I ll do it I have backed up my files and any apps or programmes installed I don t care enough about to warrant putting up with these issues Though the OS came preinstalled on the laptop so I don t have it on disc don t know if I might need it if I do a reset The OS is Windows nbsp

A:Many issues with 3 month on laptop

I would suggest that you restore the laptop to it's "like new" settings and re-apply all the Windows updates
 

http://www.techspot.com/community/topics/many-issues-with-3-month-on-laptop.199993/
Relevancy 19.35%

I am using windows 7 and my webcam is not working,whenever I tried to use to it says "webcam not detected ". even it is absent in device manager and I hope someone will help me to solve the problem.
 

A:Dell integrated webcam won't work

What is the exact brand and model # of your laptop?
 

http://www.techspot.com/community/topics/dell-integrated-webcam-wont-work.199619/
Relevancy 17.63%

Hello All,

I am using laptop with windows 7. It is not detecting my home wifi connection , However it is showing other nearby wifi connection.

In other PC and my Mobile device wifi connection is working properly.

Can someone please help me to resolve this issue.

Thanks in advance.
 

A:Wndows 7 Wifi not working

For the WiFi router in your dwelling is it on? Turn it off an on. See if that works for you.
 

http://www.techspot.com/community/topics/wndows-7-wifi-not-working.199856/