Windows Support Forum

Microsoft word...How to change Registered name.

Q: Microsoft word...How to change Registered name.

when I open my microsoft word, it says "registered to (username)". How do I change the username?

Relevancy 100%
Preferred Solution: Microsoft word...How to change Registered name.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 63.21%

I am trying to figure out how to delete unwanted graphic elements from Word templates. Specifically things like vertical design-type lines in the resume formats such as the ones that occur in Word 2003 and the newest one for Vista/2007.

I can't seem to find any way to remove these elements, nor can I see them in the document maps or format boxes.

Thanks for helping.
 

Relevancy 63.21%

When did Microsoft Word change to show you .docx I have just noticed this today I know they were saved as that unless specified. But it didn't show up when you saved a word Doc as name "April" for e.g. it was saved into you're documents as April and you didn't see the .docx. I have only noticed this today April.docx, is everyone else the same?

A:When did Microsoft Word change to show you .docx

It sounds like you (or something) changed this setting:
File Extensions - Hide or Show

I would suggest not hiding any file extensions.

http://www.sevenforums.com/software/288337-when-did-microsoft-word-change-show-you-docx.html
Relevancy 62.35%

Hello,

I have a Word document that serves as an advising sheet for students. I would like for the checkbox to change color when it is selected---for example, the box turns red when it's selected, and goes back to it's default color when unselected. I've looked for coding help all over the internet and I tried to figure this vba coding stuff out, but I'm having problems and I'm sure I'm not doing it right. Keep in mind, I know basically nothing about Vba code and I'm basically learning on the fly. I am running Word 2013. I really appreciate any help that can be provided. Thanks.
 

http://www.pcreview.co.uk/threads/microsoft-word-checkbox-color-change-when-checked.4070213/
Relevancy 61.06%

I've got a document about 41 pages, broke into multiple sections. Track changes have been on, I've been able to edit the file for a while up until an hour. Now, when i make any changes this document just closes, this has been tried and same phenomenon occurs on 3 other computers, so it must be something with the file? Any idea would be appreciated.

Some interesting characteristics:
when change is made word shuts down.
but when you use auto recover and word opens back up, the change that caused word to close is actually made.
 

A:Microsoft Word 2003 closes in error when I make a change with track changes

do you have the remove hidden data feature installed and turned on?
Otherwise, I would suspect a corrupt Normal.dot file - close Word, find and rename or delete it (Word will rebuild it when you open it again).
 

https://forums.techguy.org/threads/microsoft-word-2003-closes-in-error-when-i-make-a-change-with-track-changes.645610/
Relevancy 58.91%

Since my dad got this computer for me years ago, his name has always been registered or whatever you call it that makes his name appear as the author of html and java files... and also be the name on the "C:\Documents and Settings\His Name Here\Desktop...."

... when I write a java class in eclipse, or html, it automatically says his name as the author at the top, and I have to change it. Any way I can change it more permanently? I dont think I can change the user folder under his name, because everything is installed there... but thats not really important, its this other annoying thing.
 

A:How to change the registered name

http://forums.techguy.org/archive/index.php/t-255812.html

I'd backup that key first, just in case.

moper
 

https://forums.techguy.org/threads/how-to-change-the-registered-name.318851/
Relevancy 58.91%

When you click properties on My computer it says registered to..."xxx" I want to change that informantion. How do I do that? I cant seem to find anywhere where I can do that...Please help if it is possible...

Ct4033
 

A:How do I change the registered name in XP?

This tweak should sort that for you
 

https://forums.techguy.org/threads/how-do-i-change-the-registered-name-in-xp.129676/
Relevancy 58.91%

When I setup XP pro for our users, I only put the username on the first box on the initial setup. Unfortunately, this information was used by the machine for the "Registered To:" part of the system properties. When I click in the dialog box I notice there is a space for a company name also.

Does anyone know where I can edit this so I can put the correct information? So far we only have three machines on XP, but I would not want o wait for it to grow before I start correcting this.

Thanks.

Here is the photo:
 

A:Change Registered To on Win XP Pro

To change the information you will need to edit the windows registry.

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\Current Version

you can change the options there for Registered Owner and Organization

Good Luck!
 

https://forums.techguy.org/threads/change-registered-to-on-win-xp-pro.89093/
Relevancy 58.91%

Iam got XP home ED and would like to change Registered Name, how can i do this please.
thanks
qoq
 

A:Registered name change XP

I really don't suggest doing this unless you know what you are doing and make the appropriate backups, but I had to do it one time when my new PC was registered as "Registered User"...drove me nuts.... I searched the registry for the entry(ies) and edited it to what I wanted it to read. But these days, with the way one has to register/license/activate XP, I'm not sure what the implications are....
 

https://forums.techguy.org/threads/registered-name-change-xp.159667/
Relevancy 58.91%

My new laptop came preinstalled with Windows XP. When it booted up, it asked me who would be using this computer, saying something about how it would create new profiles for them. I whimsically decided to enter "THE KING" (to be the admin) and "peasant" (for other users).

Apparently that was a bad idea because now it says the computer is registered to THE KING (for example, when you click My Computer, then properties). Is there any way to change it?
 

Relevancy 58.05%

i just went from windows 2000 to windows 7 professional and we had to reinstall all programs....
problem:
i need to open my company logo which was saved in microsoft office word 97-2003 - my new program is microsoft works word processor - i have tried saving it in different formats on my old computer but nothing seems to be working....
any suggestions?
 

A:Converting files from Microsoft Office Word 97-2003 to Microsoft Works Word Processor

https://forums.techguy.org/threads/converting-files-from-microsoft-office-word-97-2003-to-microsoft-works-word-processor.987414/
Relevancy 58.05%

Someone had my computer before me, and although it isn't that important it aggravates me that his name still shows up sometimes like when things are listed under Documents and Settings/Billy/etc.
Is there any way to change this to my own name? When u try to just rename the folder it doesn't let you.
Thanks
 

Relevancy 58.05%

My Mom bought a computer at an estate sale. (Very nice HP A220N) She would like to have it registered in her name. Is there a way to change who it is registered to?
 

Relevancy 58.05%

Hi all.

I have just bought my wife a new laptop and she wants to give her old, serviceable laptop to our son.

Rather than show her name on logon or add another user, l want to change the registered owner in system settings, add my son as an administrator user and delete my wife as a user.

However after adding my son as a user l cannot delete my wife's user profile, does not delete it.
Any ideas please? Windows XP Home service pack 2

Many thanks

A:Change registered user

Hi .Take a look, http://support.microsoft.com/kb/279783See the line about not being able to delete a user who is logged on, that may apply.Louis

http://www.bleepingcomputer.com/forums/t/175282/change-registered-user/
Relevancy 58.05%

Ok, I've read the threads on how to change who my puter is registered to by going into regedit, blah blah blah. Now, how do I change the "Documents and Settings" folder name when I search for the old registered name?

That may be confusing, here's an example:

-My puter was registered to "X and Y"
-I changed registered user to "X" by going into regedit
-When I search for "X and Y" on my puter, the "Documents and Settings folder" comes up and still shows "X and Y" as its name and I cannot change the name of that folder. How do I change the name of this folder?

Thanks,
PS
 

A:registered user change

Log on to the computer as an administrator.
Create a new folder.
Open the current "Documents and Settings" folder.
On the Tools menu, click Folder Options, and then click the View tab.
Under Advanced settings click Show hidden files and folders, and then click to clear the Hide file extensions for known file types and Hide protected operating system files check boxes.
Click OK.
Click and drag to copy all the folders to the new folder, except for the currently logged on users folder.
In Control Panel, double-click System, and then click the User Profiles tab.
Copy the current user's profile to the new folder.
Click OK, close Control Panel, and then log off and log on to the computer as an administrator again.
In Registry Editor, click Find on the Edit menu.
Type documents and settings, and then click Find.
Replace the value data or rename the value or registry key to the new path for each and every registry key and value that contains the original path.

NOTE: You must complete this change for every instance in the registry or your computer may not start. It is imperative that you update all registry keys and values with the new path.

Restart the computer.
You can now safely remove the original "Documents and Settings" folder.

To be fair, It would probably be easier just to create a new user, and move any files and folders that you want to the new folder, and then delete the old user!
 

https://forums.techguy.org/threads/registered-user-change.349432/
Relevancy 58.05%

I loaded windows for a friend and accidently spelled their last name wrong. Can I fix this?
 

A:change the name of the person registered

Go to Start | Run
Type in Regedit

In the left pane find the following keys

For Windows 95/98/ME

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion
For Windows NT/2000/XP

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion

In the Right Pane, double click RegisteredOwner to modify the strings values,

Close regedit
 

https://forums.techguy.org/threads/change-the-name-of-the-person-registered.158268/
Relevancy 58.05%

Purchased new computer, gave other computer to sister which had original Win98/Win98SE on it, she upgraded to WinXP, registered under her name; however, computer retained MY name, and everything we've tried to eliminate ownership of computer from my name to hers has not worked. Does anyone know how to do this? Tried: logoff, user, system properties changing, etc. If it is a registry change, please indicate step-by-step because the registry makes me nervous! Thanks for whatever help you can offer.
 

Relevancy 57.62%

In most of my applications, it can bring up the name of my computer, I just installed MS Publisher and it brings up my company name which is great but the word "Mountain" is abbreviated and I want it to read Mountain. I go in to control panel, system and it shows it there as being Mtn...is there any way to change that?
 

Relevancy 57.62%

I recently purchased a dell dimension desktop off of a neighbor because they went with a laptop. I upgraded the win xp to xp pro. when I look in system properties the PC is registered to the previous owner. Not the XP software, just the PC.

How do I change the registered name on the PC so it no longer shows the previous owners name?

Thanks

A:Change The Registered Name In System Properties?

Well, you can change your name in the registry but mucking around in there is not something I think anyone highly recommends unless you know what you are doing. So doing so is at your own risk and I would make a registry backup before making any changes in there.Go to Start menu and select Run and type regeditFind and go to below key:HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\Current Version Change your name in following subkey :Registered Owner

http://www.bleepingcomputer.com/forums/t/104904/change-the-registered-name-in-system-properties/
Relevancy 57.62%

is there a way to change who a computer is registered too?

i am going to be giving a laptop i have to someone else as i am getting a new one.

but in the system properties it still shows as registered to me.

is there a windows command to change it or do you have to reinstall the system with the cds from the manufacturer?

thanks in advance
 

Relevancy 57.62%

Okay so the title of the thread is a bit misleading, because I was able to get in and change who my computer is registered to... However, When I go to save or open something on the desktop it still says C:\Documents and Settings\(the name that I used to have the computer registered to)\Desktop\ etc etc... in the navigation bar, How do I get the computer to change that?

Thanks in advance

By the way im operating in windows xp.
 

A:Change Computers Registered Owner

You could create a new user account for yourself in the Control Panel
 

https://forums.techguy.org/threads/change-computers-registered-owner.702532/
Relevancy 56.76%

Hiya people,

Easy question, how do i change the registration details for my computer... The guy i bought my PC from put in the wrong name and i want to change it...
^_^

Matt.
 

Relevancy 56.76%

Hi, I have made a bootable ISO file for XP with other applications for myself.

However is there any way I can edit the registered user information somewhere in the ISO before the software is burned to DVD and ran on pc.

I know that you can run regedit when the software has been loaded and edit the MicrosoftWindowsNTCurrentversionRegistered user.

I need to know if it is possible to change at ISO stage.

Thanks in advance

http://www.bleepingcomputer.com/forums/t/25191/how-do-change-registered-user-info-for-xp-on-a-iso-file/
Relevancy 56.76%

I want to sell my computer, desktop XP SP2 but I want to change the name as registered user to my friend. How do I do that or can it be done without re-installing windows?

I called Microsoft and they want $45 to do it?

Any suggestions?

Daniel...........Toronto
 

Relevancy 56.76%

In viewing System Properties on my PC I see the display of

Registered to:
SJ
SJones

This information is the default for registering any new software which is installed.

How can I change this? I searched through regedit but have not found the exact location of this information.

Sam
;
 

Relevancy 56.33%

I had a problem with the Joe Hill virus last year. I just went into properties of my computer and Joe Hill is listed as the registered to: person. I also can't find out what name is my admistrator. I can't get into documents and settings.
 

A:Solved: Joe Hill is the registered owner of my computer how do I change it

https://forums.techguy.org/threads/solved-joe-hill-is-the-registered-owner-of-my-computer-how-do-i-change-it.752399/
Relevancy 56.33%

How or where can I change my registered email address for windows 10 preview?
From the start when Windows started with their preview I did an registration with a email address in used in that time.
Now, running windows 10 as an insider and geregisterd with a Microsoft account and using a new Microsoft mail address, in settings my PC is saying: Get Insider Preview builds.
Now I'm thinking if I make my geregisterd email the same as the one I'm using with the Microsoft account, this will be solved.

A:How do I change the registered email address in Windows 10 preview?

Originally Posted by Bill Holtrop How or where can I change my registered email address for windows 10 preview?
From the start when Windows started with their preview I did an registration with a email address in used in that time.
Now, running windows 10 as an insider and geregisterd with a Microsoft account and using a new Microsoft mail address, in settings my PC is saying: Get Insider Preview builds.
Now I'm thinking if I make my geregisterd email the same as the one I'm using with the Microsoft account, this will be solved. Hi Bill,
Welcome to the site.
I just want to make sure I know where we are and where we need to end up.
When Insider started last spring, you signed up as [email protected] But that wasn't the Microsoft Account you have now? Have you abandoned the account? Can you still sign in to the Insider Dashboard on the web with that email address?
So now when you log on to your computer you are using [email protected] for the Microsoft Account? Has it been that way long? And the PC is still receiving Insider Builds? Is [email protected] also registered for Insider?
Please correct any of that if it is mistaken information...
On the original account, is there any data or App ownerships that you can't part with?
Likewise on the new account, anything that must be kept?

http://forums.windowscentral.com/windows-10/409978-how-do-i-change-registered-email-address-windows-10-preview.html
Relevancy 55.9%

I am selling my laptop to a friend. I did a system restore to get Win XP to its original state. Now I want to reinstall Office Pro 2003. I can't find my install CD but have my Product ID number (was smart enough to record that before I scrubbed it). I've scoured the MS site to see where I can download Office Pro 2003 by entering my Prod ID but can't find anything. Any recommendations?

Thank you!! I love this site.
 

A:How do I retrieve registered Office Pro 2003 from Microsoft??

Looks like you can call MS and order (purchase?) a replacement CD.

How to order a replacement CD for Microsoft Office
http://support.microsoft.com/kb/302822
 

https://forums.techguy.org/threads/how-do-i-retrieve-registered-office-pro-2003-from-microsoft.544831/
Relevancy 55.9%

Okay, when I've tried the other forums they instructed me to go through this process:

My Computer/HKEY_LOCAL_MACHINE/Software/Microsoft/WIndows

And in the right pane there is supposed to be a title, Registered Name, but there is not. All I have is stuff such as accessories, CommonFilesDir, devicepath,mediapath, etc.

What do I do?
 

Relevancy 55.04%

Does anyone noe weather vista Microsoft word support the old formated ones? Or is there any plug-in needed to support?

A:Does Vista Microsoft Word Support Old Format Microsoft Word?

I'm assuming you're talking about the new office 2007? meaning word 2007?

If that is the case, then yes it does run older versions of word. In the sense that if you have a word document that was made and saved in Word 2003 it would work in 2007.

Just like when you make something in word 2007 you are able to save it as a Word 03-07 document so it works on both versions of Microsoft Word.

http://www.bleepingcomputer.com/forums/t/107910/does-vista-microsoft-word-support-old-format-microsoft-word/
Relevancy 55.04%

I have created in Word Setting View 2003 Microsoft Microsoft 97 Word To Microsoft Word on an XP Microsoft Word 2003 To Microsoft Word 97 View Setting OS some lengthy documents I created them using a view setting of I sent them to my employer who is using Windows and Microsoft Word My boss opened them with his system and they displayed on the screen at a view of He wants me to send him Word documents that he can open from the Microsoft Word 2003 To Microsoft Word 97 View Setting CD-R that I send that will automatically display at view on the screen so that Microsoft Word 2003 To Microsoft Word 97 View Setting he does not have to set the view for each document as it displays So what is the answer Is there a way that I can save my created documents so that when my boss gets them on a CD-R that they will open on his system at a view setting of Is there also a way that his system can be set to default to in reading from the CD-R My boss does not want to copy the documents to the system hard disk from my sent CD-R preferring to read and copy directly from the CD-R that I send so that the original documents will not accidentally be changed Any help would be appreciated

A:Microsoft Word 2003 To Microsoft Word 97 View Setting

Welcome to BCWhat if he were to download Word 2003 Viewer?Mark

http://www.bleepingcomputer.com/forums/t/128576/microsoft-word-2003-to-microsoft-word-97-view-setting/
Relevancy 54.61%

When I try to get the latest updates this is the message I continue to receive:

Files required to use Microsoft Update are no longer registered or installed on your computer.

I've clicked on the radio button to have the missing files installed and then the updates but I keep getting returned to the same screen.
Files required to use Microsoft Update are no longer registered or installed on your computer. To continue:
Radio button activated. Register or reinstall the files for me now (Recommended)
Other Radio Button. Let me read about more steps that might be required to solve the problem
 

A:Files required to use Microsoft Update are no longer registered or installed on your

can be corrected by re-registering the various dll files that Windows Update requires to run.

To do this firstly click on the “Start” button then “Run” and enter the following command into the “Run” dialog box

· regsvr32 wuapi.dll

You should then receive a message to say it was successful. The above process then needs to be done for each of the following commands:-

· regsvr32 wups.dll

· regsvr32 wuaueng.dll

· regsvr32 wucltui.dll

· regsvr32 atl.dll

· regsvr32 msxml3.dll
 

https://forums.techguy.org/threads/files-required-to-use-microsoft-update-are-no-longer-registered-or-installed-on-your.548646/
Relevancy 54.61%

I have an application running in windows vista, when I install on my new laptop in windows 7 appear the next leyend The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine, this app was created with VB but I don't have de sources, what can I do?

A:The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine, Windwos 7

Hello, Are you running your application on x64 or x86 version of Windows? Also are you the developer that wrote the code for OCR.Form1 class? If so, I would suggest changing the Platform Target build option for your application to target x86 rather than Any CPU. Currently it appears that you are loading some assemblies out of the x64 GAC which would indicate that you are running x64 windows and Microsoft.Jet.OLEDB.4.0 provider is not 64-bit compatible.To resolve this issue open the project in Visual Studio then: 1. From the solution explorer right-click your project then click Properties2. Click the Build tab3. Change Platform target from: Any CPU to x864. Re-build your solution

https://social.technet.microsoft.com/Forums/en-US/14041b74-6ca6-49be-af90-d8ff3f962724/the-microsoftjetoledb40-provider-is-not-registered-on-the-local-machine-windwos-7?forum=w7itproappcompat
Relevancy 54.18%

i have resolved the problem for http://www.bleepingcomputer.com/forums/t/93345/security-certificate-error/ with the help of Microsoft support officer. But it create a problem (Files required to use Microsoft Update are no longer registered or installed on your computer) when the officer ask to go to window update to update my computer after a in-line update using the window xp sp2 CD.I follow the instruction given by running Winupsecure.bat and WindowsUpdateAgent20-x86.exe which was sent to me by the officer. But it still does not resolve the problem.I did a search on the net and run the following:RepairAutoUpdates.bat,wurtbeta.exe andDial-a-fix-v0.60.0.24 (I can run Dial-a-fix.exe but i could't run secedit.exe)But it still does not solve the problem. So I did a SFC /SCANNOW, but it does not help.I would gladly thank for your help in resolving my problem.

A:Files Required To Use Microsoft Update Are No Longer Registered Or Installed On Your Computer

Have you tried another repair install of Windows (after the problem was fixed)?

http://www.bleepingcomputer.com/forums/t/93489/files-required-to-use-microsoft-update-are-no-longer-registered-or-installed-on-your-computer/
Relevancy 52.89%

alright to tring Word install again is Microsoft microsoft word my problem is that i have already used microsoft word for awhile now and its been fine no problems whatsoever then Microsoft Word is tring to install microsoft word again about week ago it started doing a lot of crazy stuff when i opened it this happens every single time i open it and it states that it is preparing to install microsoft word i already have it installed then it states that it must gather the required information At first i thought it was an update so i decided to let it continue when it was finished it said that quot the feature you are trying to use is on a CD-ROM or other removable disk that is not availible please insert the microsoft word disk and hit ok quot alright the thing was it wasn t an update and i couldn t find my word CD because it hasn t asked for one ever since i installed it I then hit cancel and everything went away and about a minute later my microsoft word came up and it had no updates and was functioning fine but it was going about half the speed it usually does Other than that there were no other problems and i continued with my work The only thing that really bugs me is that this entire process takes about minutes every time I start up so its kinda of a pain is there any way to get rid of this thx to all Peace Out nbsp

Relevancy 51.17%

I am setting up a new computer with Windows 7 (from XP). I transferred some Word Perfect files to new computer prior to installing the Word Perfect 11 software. I changed one document to Word, and all of my WP documents changed. Now since I have WP installed, I would like to be able to open original WP documents in that program. I do not see a way to change the files back to WP. Although the files say "WPD File," they open in Word when I attempt to open them. I have tried to "Save As," but do not see the Word Perfect option. Any suggestions will be appreciated. Thanks!

J Mills

A:Word versus Word Perfect -- how to change back to WP file

I changed one document to Word, and all of my WP documents changed. Now since I have WP installed

=>Sure you changed only one document? How did you do that?

http://www.sevenforums.com/software/326761-word-versus-word-perfect-how-change-back-wp-file.html
Relevancy 50.74%

merry christmas, ho ho ho, jingle bells and all that good stuff! so you kiddies that have behaved yourself this year, what is santa going to bring you? for the rest of us..saw a saying "Santa, define nice". ok, wasn't sure where to post this. Sorry to bother you all with these little things, BUT THESE ARE "HASSLES" (and we Hamiltons really hate hassles lol lol) ARE DRIVING ME NUTS. have xp/word 2003. in word, i set it so when i want to use an auto shape that "create your drawing here" doesn't pop up. for a while it stays that way, but then it changes back. same happens with auto correct. set a setting i want like auto bulleting/number is disabled, yeah it changes back after a while. so all you wise ones, your thoughts!
 

https://forums.techguy.org/threads/word-2003-change-setting-but-they-change-back.968224/
Relevancy 49.88%

I got the new version of word today on my brand new computer and I need a word processor for my job, and its not letting me pick it as my default one. When I go to the control panel and try to do it from there, it still doesn't pick it up. Why is this happening and how can I go through and change it?
 

Relevancy 49.88%

I remember having deleted my Microsoft Office 2007 trial and now I can't find some of my previous word documents that I remember saving on my computer.

Is my suspicion true?
 

A:Does installing Microsoft Word 2007 delete word documents?

saiz said:


Is my suspicion true?Click to expand...

I don't think so. Try installing OpenOffice.org 3.0 and you'll be able to open those files.
 

https://forums.techguy.org/threads/does-installing-microsoft-word-2007-delete-word-documents.811439/
Relevancy 49.88%

I tried the solution posted earlier:

Delete the entire key HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Word\Data

but it didn't help. Any other thoughts?
 

A:MS Word 2002 "This document could not be registered"

Check if the service "DCOM Server Process Launcher" is set to Automatic and running.

MS word warns if the process cannot be registered on computer if this service is not running.

To check, click Start->Run->type Services.msc->click ok.

Reboot.
 

https://forums.techguy.org/threads/ms-word-2002-this-document-could-not-be-registered.922249/
Relevancy 49.88%

this problem. i run software on .Net. it can't access into database access. and have error. I reinstallded. but unsuccessful. please for i ask. what this error? what did it loss file of system?
 

A:i want ask error: "The microsoft.ace.oledb.12.0 provider is not registered on the local manchine"

What software are you running in .Net, and what version of Access are you suing ?
 

http://www.pcreview.co.uk/threads/i-want-ask-error-the-microsoft-ace-oledb-12-0-provider-is-not-registered-on-the-local-manchine.4063819/
Relevancy 49.45%

I have Microsoft Office 2003 installed and also the Microsoft Office Compatibility Pack 2007. However, when I receive an e-mail with a Microsoft Word 2007 attachment, the document will not open even with the Compatibility Pack installed. I can not convert .docx to .doc. Any advice please?
 

A:Microsoft Outlook 2003 - Attachments in Microsoft Word 2007 will not open

Hi again,

Anybody able to help me with this please?
 

https://forums.techguy.org/threads/microsoft-outlook-2003-attachments-in-microsoft-word-2007-will-not-open.933856/
Relevancy 49.45%

Hi all I have a problem with MS-Word to identify -=[/WORD] change How and numbers?? [WORD]=- that I just can t seem to crack on my own so I was hoping that maybe someone over here had a clue [WORD]=- How to identify and change numbers?? -=[/WORD] what the right angle on this one may be I have pricelists of my company s products in a usual doc-file Mainly because I couldn t [WORD]=- How to identify and change numbers?? -=[/WORD] get the layout proper in Excel and mounting xls in a doc makes it way too heavy Anyway prices need to be increased a bit and since these are quite extensive lists re-calculating and changing every single price would be a lot of work so I was hoping to do this automated like increase every price by or so I tried to make a macro that finds numbers by looking for something like quot quot and I think I can make this work but how on earth can I get Word to change that value I know I know I should have done this in xls but that would be a serious pain to do it all over in Excel Any [WORD]=- How to identify and change numbers?? -=[/WORD] thoughts on this matter Thanx in advance nbsp

A:[WORD]=- How to identify and change numbers?? -=[/WORD]

https://forums.techguy.org/threads/word-how-to-identify-and-change-numbers-word.279130/
Relevancy 49.45%

Hya everyone. I hope i am in the right forum. Could someone tell me how to change a letter in Microsoft Works processor into word format. My son is trying to email his c.v. to companies and agencies but got a letter from a couple stating unable to open file attachment please email in word format. We do not have microsoft word just microsoft works.

Thanks
Dave H
 

A:Microsoft works word processor to word format

Check this Microsoft page and see if helps.
 

http://www.techspot.com/community/topics/microsoft-works-word-processor-to-word-format.60994/
Relevancy 49.45%

Running Win XP on a home built Intel Core 2 duo platform. Just started within the last week or so. I can open the software from the CD, but not from my hard drive
 

Relevancy 49.45%

Hi Here is a strange one I have Microsoft Word on a computer running Windows XP SP I just began having a problem opening documents directly in Word The documents will open but they are not right For example I have a document that is passworded out Within Word the document will open but it does not ask for with - problem in Word docs Word Microsoft opening a password and the contents of the document Microsoft Word - problem with opening docs in Word come up scrambled Here is an excerpt of what it looks like k' p V q F t Uzjikvn nnU b g CAg t c B I sD l tL T O gt l C Ab hA gt S This goes on for Microsoft Word - problem with opening docs in Word pages However if I go into Windows Explorer and open the document by double clicking on it there it correctly asks for the password and opens fine Weird no I tried opening other documents from Word that do not have passwords They open but the documents include a bunch of formatting instructions that usually remain hidden But from Windows Explorer they Microsoft Word - problem with opening docs in Word open fine Here is an example Document opened with Windows Explorer Blaine Blair Brody Bryce EVAN English form of Welsh Iefan meaning quot God is gracious quot Lucas Quentin ---------------------------------------------- Same document opened from within Word Blaine Blair Brody Bryce EVAN English form of Welsh Iefan meaning quot God is gracious quot Lucas Quentin Normal Normal Default Paragraph Font Default Paragraph Font Hyperlink Hyperlink aC Documents and Settings Doug Application Data Microsoft Word AutoRecovery save of Document asd aC Documents and Settings Doug Application Data Microsoft Word AutoRecovery save of Document asd C Documents and Settings Doug My Documents Word Boys Names doc e Unknown Times New Roman Times New Roman Symbol Symbol Blaine Blaine Blaine Normal dot Microsoft Word Blaine Root Entry Table Table WordDocument WordDocument SummaryInformation SummaryInformation DocumentSummaryInformation DocumentSummaryInformation CompObj CompObj ObjectPool ObjectPool Microsoft Word Document MSWordDoc Word Document -------------------------------------------- Also once the document has been opened with Windows Explorer it opens correctly from the recent documents list under the File menu in Word as long as it stays on the list So it is only navigating to the document files from within Word that is a problem What may have changed recently to have caused this Over the past couple of days I have been working with one of the people at bleeping computer to try to eliminate some malware The situation with Word was NOT a symptom of the malware Word used to work fine even with malware in the computer But we ran a bunch of scans and virus fixers during the exercise Perhaps something we did screwed up Word I don't know If you think the answer is to uninstall and reinstall Word that is a simple enough remedy But I wanted to check with you before doing that in case you have heard of this and something else is actually the problem that re-installing Word won't fix Thank You

A:Microsoft Word - problem with opening docs in Word

I would be hard to tell with your infection
You have an open topic in the HJT forum. You really should not make any changes until you are done there

http://www.bleepingcomputer.com/forums/t/272384/microsoft-word-problem-with-opening-docs-in-word/
Relevancy 49.45%

After recent full system recovery caused by one or more virus, I am unable to re-install Microsoft Word or Word Perfect on my Compaq Presario, which has Windows XP. Microsoft Word will sometimes start the process but then just stops, giving no indication of what steps to take next or what the problem is. Word Perfect seems to start the process each time but then gets hung up with updating what it describes as the SHFolder.dll. Have waited as long as 20 minutes for this update. The screen does show activity but it just never seems to get done. I cannot take the installation process past that point.

Any suggestions on how I can correct or cure this problem?
 

A:Unable to install either Microsoft Word or Word Perfect

Check here: http://support.microsoft.com/kb/q303437/ for some help - probably the .dll is either corrupt or the path not recognized. Depending on whether or not this page helps, either fix it with that or lookup SHFolder.dll. on the net and download a new copy from somewhere like http://www.dll-files.com/dllindex/dll-files.shtml?shfolder and install it.
 

https://forums.techguy.org/threads/unable-to-install-either-microsoft-word-or-word-perfect.578477/
Relevancy 49.45%

Hard to explain but here goes:

When I have a sentence that I want to move to the middle of the page, I place the curser to the left of the word and try to push it right by hitting the space bar and nothing happens.

This is only when the word is all the way to the left of the page.

Is there some type of formatting that would allow this to be free so that I can push words forward??
 

Relevancy 49.45%

I recently purchased an ASUS Windows bit computer I transferred my Microsoft Works Version word processor and spreadsheet files from my old computer onto the new computer I just purchased the Microsoft Office Home and Student Edition bit version from an online vendor and installed the software onto my new computer I have no problems opening my Works spreadsheet files in Excel However when I attempt to open a Works word processor file in Word I get gibberish I Microsoft Cannot Files Word in Works Microsoft Open 2013 did some research online and found out that there is a Microsoft tool called Works - Converter which allows Cannot Open Microsoft Works Files in Microsoft Word 2013 one to open Works files in Word I downloaded the Works - Converter tool from the Microsoft Support website and installed it on my PC However when I subsequently attempted to open a Works word processor file in Word a dialog box appeared with the error message Word cannot start the converter Wks Pxy cnv and the file Cannot Open Microsoft Works Files in Microsoft Word 2013 did not open properly i e I got gibberish I did a little more research online and found out that uninstalling the Works - Converter then downloading and installing the Microsoft Visual C Redistributable Package and finally reinstalling the Works - Converter may correct this problem I followed these steps but unfortunately when I attempt to open a Works word processor file in Word I get the same error message and the file does not open properly If someone can give me advice on a successful way to open Works spreadsheet files in Word I would greatly appreciate it

A:Cannot Open Microsoft Works Files in Microsoft Word 2013

http://support.microsoft.com/kb/315757
 
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/i-cant-open-any-of-my-microsoft-works-documents/c242b6da-3292-4d7d-8689-9a554ecb7171
 
http://www.computerhope.com/issues/ch001017.htm
 
Reboot after any changes you make.

http://www.bleepingcomputer.com/forums/t/551097/cannot-open-microsoft-works-files-in-microsoft-word-2013/
Relevancy 49.45%

Here's the Microsoft Download of the utility that will prevent booby-trapped word [.rtf] files from infecting your computer.
 

A:Microsoft Fix It Tool for Disable opening RTF content in Microsoft Word

Applies to

Microsoft Word 2013
Microsoft Word 2010
Microsoft Office Word 2007
Microsoft Office Word 2003
Still no word from Microsoft regarding if it affect WordPad.
 

https://malwaretips.com/threads/microsoft-fix-it-tool-for-disable-opening-rtf-content-in-microsoft-word.24533/
Relevancy 49.45%

I need help uninstalling an add-in to Microsoft Works Suite 2006. I downloaded a program that helped me remove the actual program, Microsoft Works, but the add-in is still stuck and I can not for the life of me get this add-in to unisnstall.. This hole thing has been causing me problems for sometime now, it keeps making my WIndows Installer pop up flashing on the screen about fifty percent of the time I'm on my laptop. I have windows 7 if you need that information, I realize now the program has compatible issues..I finally got the program gone someone please help!! It is call Microsoft Works Suite Add-In for Microsoft Word.
THANKS!!!!
 

A:Help Uninstalling Microsoft Works Suite (2006) Add-In for Microsoft Word

https://forums.techguy.org/threads/help-uninstalling-microsoft-works-suite-2006-add-in-for-microsoft-word.1098741/
Relevancy 49.45%

Hi I have an access Database that has a form wich contains OLE Object fields in one I use it to paste in Microsoft Access Word a to Microsoft document Issue linking a link to an excel field and the other field I use it to paste a link to a word document This is running under windows and office Every was working fine I had to change my notebook harddisk and mother board After this I reinstall windows Issue linking to a Microsoft Word document in Microsoft Access and office The problem that I have is the following When I double click in the excel link it works fine an open my excel file When I do the same with the word link I got the following message translated because I have my notebook with spanish language quot Error during an operation over an Object Document It is possible the OLE Server is not registered To Register it reinstall it quot Its very extrange because my database worked fine before I reinstalled windows and office and the thing the it works fine with the excel link but not with the word link Please if anyone have and idea of what is going on Thanks a lot in advance for your help nbsp

A:Issue linking to a Microsoft Word document in Microsoft Access

Welcome to TSG jcantini,
Since no one is offering any thing here I'm going to suggest you save the document in the current version of word and reistablish/rebuild the link. I suspect this is an older version of access running with office 2010? mdb file type?

If you google "the ole server isn't registered access 2010" there are tons of confusing suggestions out there! Good luck..
 

https://forums.techguy.org/threads/issue-linking-to-a-microsoft-word-document-in-microsoft-access.1093279/
Relevancy 49.45%

Running Windows 7 SP1 64bit OS, and when I go to Start,Programs,Microsoft Office 2010 Home and Student, and try to use word, excel or power point, I get the error "Featured ID Not Registered".

If I open the program from the menu bar at the top of my screen, I can open each of the applications, and work with them normally. I then save the file to my desktop. If I try to open up that recent document from my desktop, I get the same "Feature ID Not Registered" error.

I was going to uninstall all of Microsoft Office 2010 Home and student and then install it again, but it will not uninstall.
 

A:Microsoft Office Applications "Featured ID Not Registered"

At this point I would try a 'repair'. Problem points to something wrong with the install (as you have surmized). Go to programs and features, right click Office and select change. then repair > continue
 

https://forums.techguy.org/threads/microsoft-office-applications-featured-id-not-registered.1101299/
Relevancy 49.02%

In the Windows 95, 98, ME Forum they explain how to change the "registered" window name: "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion
Then in the Right pane you should see "Registered Owner". Right click on it and select Modify and change it to what you'd like."

However, this doesn't work for me because there is no "Registered Owner" in the right pane of CurrentVersion. I use Windows XP. Any suggestions?
 

Relevancy 49.02%

Hello!,
I need to change a PC with Windows XP ID number. I think it should be done using the REGEDIT function. Where do I go to change the "Registered To" or Computer Identification name, the name that was entered when Windows XP was first installed on that computer? Thanks, Xavier57
 

A:Computer ID or "Registered To" Change

If you mean the Computer name go here
How to Change ComputerName

Press the Windows Logo key + Pause Break key together
Another screen will open..
Click on the Computer Name tab
Then Change button.

 

https://forums.techguy.org/threads/computer-id-or-registered-to-change.565664/
Relevancy 49.02%

Will I run into any problem if I change the Registered Owner (and Registered Company) for my system? (to fix a typo!)

The method is described here:
Registered Owner and Organization - Vista Forums


I did see that some Registry installer sections for non-MS products have picked up the current Registered Owner, so will contact those companies separately.

A:Q: Ok to change "Registered owner"?

Nothing will happen, expect that you own all the files and can edit them now.

http://www.sevenforums.com/customization/94663-q-ok-change-registered-owner.html
Relevancy 48.59%

Is there a way to count the number of occurrences of a word in MS Word?

If not, is there a downloadable text editor or something that can do such a thing?

Thanks.
 

A:Counting occurrence of a word in Microsoft Word?

Replace the Word with something like QQQ .. or the the original word .. And it will tell you how many.
Then you can replace it back to what it was ... or just don't save the edited file.
be sure to include the spaces before n after the search word.
 

https://forums.techguy.org/threads/counting-occurrence-of-a-word-in-microsoft-word.844429/
Relevancy 48.59%

I am a 3rd year university student studying Forensic Science and i have to admit im not much of a writer and these long essays absolutly kill me...i spend so much time bringing up the word count window (time i probably should be spending writing). my question is...is there any way of having a word count always on the screen counting as i go?

does anyone know if this can be done...if so how?

please let me know if i need to download something (and where to get it) or what settings i need to change in word if that needs doing.

Many Thanks
 

A:Microsoft Word 2003 word counter....

View->Toolbars->Word Count

You still have to click the recount button though.
 

http://www.techspot.com/community/topics/microsoft-word-2003-word-counter.61712/
Relevancy 48.59%

Can anyone help me out?

I click on microsoft word to try and open it and it doesn't even make an attempt to open. My word files also won't open. They are there, but just don't open.
Any ideas??

Thanks in advance!
~Rob
 

A:Microsoft word and word doccuments won't open

May be virus problem
 

https://forums.techguy.org/threads/microsoft-word-and-word-doccuments-wont-open.817375/
Relevancy 48.16%

just deleted micorosoft works and installed microsoft word(office) BUT now i cant open my old works documents? I have read alot about this but just wanted to check here before i did anything. Im sure i know what to do but just wanted to see what other methods are suggested? thanks!

A:microsoft works document to microsoft word?

What version are you using?

e.g. for 2003:

http://office.microsoft.com/en-au/word-help/convert-works-documents-to-word-format-HP001188116.aspx

for 2010:

http://office.microsoft.com/en-au/starter-help/move-from-microsoft-works-to-microsoft-office-2010-HA010337946.aspx

http://www.bleepingcomputer.com/forums/t/483375/microsoft-works-document-to-microsoft-word/
Relevancy 47.3%

Hey guys, can anyone help me to find the way of changing the registered user in system properties? I am running Widows XP SP2. I want it to be a bit more Funky! I can change the pic, as well as the manufactured and supported by: , But I can't find registered user? Please help....
 

A:How can I change "Registered to" in XP

Change the registered owner and organization.
http://www.winguides.com/registry/display.php/32/
 

https://forums.techguy.org/threads/how-can-i-change-registered-to-in-xp.330266/
Relevancy 47.3%

Is there any way to change the "registered to" name that shows in system properties in Windows XP? I am using a computer at work that was originally my home computer.

I have a mapped network drive any it keeps trying to connect as the original owner name.
 

Relevancy 46.87%

Dear Forum,

I'm just starting to learn about Microsoft Word 10, which was bundled within an Office 10 package. I'm noticing that as I type a document, the Word Count dialog box at the bottom left remains frozen at 0. When I right-click on it, it opens, but the Word Count is checked within it. So, it's not turned off or anything. I need to limit what I'm writing to a certain number of words. I have to complete this thing within the next day or so. Unexpected need for a troubleshooting solution.

Why isn't my word count going up? And the Characters seem stuck at 67. Maybe I clicked something I shouldn't have. Otherwise, I need some guidance here. Thanks. Steve
 

A:WORD COUNT IN Microsoft Word 10

try hitting 'save'....that should reset the word count.
 

https://forums.techguy.org/threads/word-count-in-microsoft-word-10.1026037/
Relevancy 46.87%

Doing a fix for a friend, and this is a new one for me. Her primary concern was that all of a sudden, when she opens word, she can not type anything in a document. I tried it, and nothing happens. It opens like normal, and when you try to type, it is like the keyboard is locked out.

I found a few things on google that I tried to no avail. There was a .DLL patch I did, and I also removed so registry keys.

It is Win XP home, with 256 ram, and a P4 1.7 Proc. The version of word was installed with a software bundle that included Microsft Works.

I uninstalled Word, and reinstalled Office 2000 PRO, and the same thing is happening...

Any help would be awesome.

Parm
 

A:Microsoft Word..I cannot type anything on Word doc

Find and delete all occurrences of Normal.dot on the system.
It sounds like the one in use is corrupt.
A new one will be created when word next runs.

Do not have Word open when you search for and delete normal.dot. Enable the viewing of hidden and system files to see it.
 

https://forums.techguy.org/threads/microsoft-word-i-cannot-type-anything-on-word-doc.223715/
Relevancy 46.44%

Hi guys first off I haven t been here for help in years literally this was the first place I thought of because a few years ago many generous people helped me solve my problem this place is awesome Please pardon me as I am only decently literate with computers but try my best Ok I am trying to solve an annoying problem for my parent s computer My dad was typing a normal document in Microsoft Word OS is XP with System Pack and it is Word and he said that just yesterday for the first time after typing for maybe a half hour a window would pop up with a quot runtime error quot and it would freeze untill he clicked ok on it and it would then shut down loosing all his work that he didn t save So I got on the computer and opened Microsoft Word and was able to duplicate the problem time after time but not every single time When I simply open word then click to close Word the box appears and he verified it is the same box he saw It says exactly as follows no more no less and every time reads the same - Microsoft Visual C Runtime Library Runtime Error Program C Program Files Microsoft Office Office WINWORD EXE abnormal program termination So I tried to research it and came across a fix on Microsoft s support site saying remove something called COM Add-ins I did so by following each step removing the one COM add in i found and it did not resolve the problem at all It still errors out SO I grabbed the master disk and uninstalled Microsoft Word NOT the whole Office set just Word and re-installed it figuring that would definitely fix it for him nope Today I got a phone call at work that it is doing it again So when I checked his computer it is erroring again for me just as it did last night Arghh I hope I provided enough information Please let me know if any more is needed I almost forgot to add that I updated and ran Full System scans of Norton and Spybot and found nothing Thanks a ton ahead of time for your help guys Mike nbsp

A:Solved: Microsoft Word keeps throwing up "Microsoft Visual C++ Runtime Library" Error, Arghh!

First, welcome back!!! (although, vaguely, it's like seeing your cousin after many years at a funeral...nice to see you, sorry about the circumstances....)
Well, this isn't fun - the more I looked, the more "answers" and causes I found...
http://en.allexperts.com/q/Microsoft-Word-1058/Microsoft-Word-29.htm
http://support.microsoft.com/default.aspx?scid=kb;en-us;835404
http://support.microsoft.com/?kbid=555220
(I think you probably did what the above is about - COM add-ins)
and two that seem similar, but aren't the same (good ol' MS!)
http://support.microsoft.com/kb/259413/
http://support.microsoft.com/kb/921541/en-us

Good luck and let us know if you get this fixed - and what did it!
 

https://forums.techguy.org/threads/solved-microsoft-word-keeps-throwing-up-microsoft-visual-c-runtime-library-error-arghh.685900/
Relevancy 46.44%

I have an index card in word that has cutoffs when i print on the start and at the end of the words.
 

A:Microsoft, Help on Microsoft Word Document

It sounds like your margins are too narrow for the printer. Try adjusting them.
 

https://forums.techguy.org/threads/microsoft-help-on-microsoft-word-document.1159135/
Relevancy 46.44%

I have an index card in word that has cutoffs when i print on the start and at the end of the words.
 

https://forums.techguy.org/threads/microsoft-help-on-microsoft-word-docoument.1159135/
Relevancy 46.44%

I have decided to try to fix a problem on my computer with the Microsoft Fix It thing that Microsoft lets us use. Unfortunately, it not only did nothing for my problem (Which I no longer care about), but it did something to Microsoft Works Word Processor, the one that comes with windows. I already tried a system restore, but I've had it for too long so my restore didn't go back far enough.

The error itself says, "Works cannot access one or more files it needs to run the Word Processor. The files may have been renamed, deleted, or moved. Try reinstalling Works, and then starting the program again." Unfortunately I don't know if it has actually been moved or deleted and I don't know how to reinstall it. Any help would be great.
 

A:Microsoft Fix It messed up Microsoft Word.

If it came with Vista, it may be in Control Panel>Programmes and Features with the Windows Components list opened. You might be able to repair it that way. Failing that, if you had a Vista DVD or made a recovery set of your own, see if that can help.

 

https://forums.techguy.org/threads/microsoft-fix-it-messed-up-microsoft-word.997443/
Relevancy 45.15%

hello every one

my sister done 10 pages for her course work and she alway save it on her memory stick.
but some how, when she try to save it this time it doesn't work and the the microsoft word file turn to notepad file and when she open it, it came up with lot of question marks, i hope there is a way to convert it back into words

thx for reading and help is needed

this is the corse work>>> Rescued document.txt

A:Microsoft word file turn to notepad file with non word text

any responses here?

http://www.techsupportforum.com/forums/f217/microsoft-word-file-turn-to-notepad-file-with-non-word-text-227683.html
Relevancy 45.15%

Hello.

I was trying to configure Word 2000 to send email, but I can't seem to find the means to configure the bloody thing. I have tried help files, but wasn't much help.

Anybody plz?

Thanks.
 

A:Microsoft Word 2000 aka MS Word 2000 - Sending Email - Need Help Configuring

Word itself does not send (or receive) e-mail messages. You may configure Word to be your e-mail editor, but it still requires an e-mail program (such as MS Outlook) to send messages.

You can send e-mails from within Word by using File, Send To, Mail Recipient (or Mail Recipient as Attachment), but this still uses Outlook to do the sending and receiving.

Gram
 

https://forums.techguy.org/threads/microsoft-word-2000-aka-ms-word-2000-sending-email-need-help-configuring.91776/
Relevancy 45.15%

Hi,

Recently, I'm having slow file loading while opening ms word files and excel files directly from windows explorer. It takes a minute to load, however it opens immediately if I open .doc files or .xls files directly from their application software. It also take a minute for MS Word and Excel software to shut down.

I have run my antivirus (Symantec) and MBAM but they all show no virus was found. I'm not sure what should I do next, please advice.

A:Microsoft Word & Excel - problem with opening files in Word and Excel

What version of Word & Excel?

http://www.bleepingcomputer.com/forums/t/303338/microsoft-word-excel-problem-with-opening-files-in-word-and-excel/
Relevancy 44.72%

Hiya

Learn about COM interoperability between Microsoft C# and large, complex COM servers. This article shows how to prepare the Office XP COM objects and how to use them in a C# program, and offers some tips on understanding why things have to be done in certain ways.

System Requirements
Supported Operating Systems: Windows XP

To run the sample, you will need the following software installed on your computer:

Microsoft Windows® XP or Microsoft Windows 2000 and related service packs (SPs)
Microsoft Office XP and related SPs
Microsoft .NET Framework and related SPs
Microsoft Office XP Primary Interop Assemblies (PIAs)
Microsoft Visual Studio® .NET
http://www.microsoft.com/downloads/...0c-d2f3-48bb-8e76-7c8892b5ed95&DisplayLang=en

Regards

eddie
 

https://forums.techguy.org/threads/programming-microsoft-word-2002-and-excel-2002-with-microsoft-visual-c-feb-12.118660/
Relevancy 43.86%

Hi is there a way to change all my word icons i need to do it because i keep getting mixed up between publisher and word i don't know why i just do

A:Way to change all my word icons ?

There may be a way, but it's a little complicated and may not work. It involves editing some files and therefore could possibly cause problems with your program (although it is unlikely) and may or may not void your warranty if you have one for Office, but I don't know for sure because I can't be bothered by that. First, what version of Microsoft Office are you using? Second, is your computer 32 bit (x86) or 64 bit (x64)?

http://www.vistax64.com/software/291753-way-change-all-my-word-icons.html
Relevancy 43.86%

Simple question.....

Does anyone know a way of having a different footer for different pages of a single document. Whenever I change a footer for a page it, as expected, changes on every page.

Thanks!!!

CAJC
 

Relevancy 43.86%

I have Word and Windows XP. In the past, Word only asked if I wanted to save whenever I opened and made some change. Now it is also asking if I want to save if I open a document to just look at it and don't make any changes. I like the Save request as a reminder when I make changes, but it's annoying to have to constantly deal with the request and click "no" when I just look at a document and don't make changes.
In the past it wouldn't ask to save unless I did something to the document. Any ideas? Tx. Joel
 

https://forums.techguy.org/threads/word-xp-saves-even-w-o-change.83734/
Relevancy 43.86%

I have to type the word resume a few times in word. Where is the setting so I can type res and resume replaces it?
 

A:auto change word

Not a word wiz, there may be an 'auto complete' feature associated with the dictionary. But you could type X1 (or something your not likly to type) and do a find and replace X1 with resume when you get finished.
 

https://forums.techguy.org/threads/auto-change-word.1103181/
Relevancy 43.86%

I have a toshiba note book NB505 running windows 7. When I open a new word pad to type information the borders are set on 0.5 left and right. I want to change the border size but when the setting change window pops up, the window is to large for the screen and I can not click on OK. The box is below the screen and I can not get it to move up? Also when I type in a short sentence and hit enter it drops down two spaces instead of one?
Please help.
 

A:word pad border change

The OK button is the default for the Page Setup dialogue. After you set the margins just press the Enter key and your changes will take effect. Alternately, with the Page Setup dialogue open, perform the following key combinations:
Alt + Space bar, then m (for Move) and use the arrow keys to move the dialogue and reveal the OK button.
To eliminate the spacing, click the line spacing button on the ribbon, and un-select "Add 10pt space after paragraphs."
 

https://forums.techguy.org/threads/word-pad-border-change.1084900/
Relevancy 43.86%

I have Word 97 and I want the program to open with 150% zoom and in the page layout view. Depending on the document, the zoom usually changes to something like 114% or 100%. Is there any way to set a default for how it opens for all documents?
 

A:How to change the way word opens

dunno if this works with word 97 or not, but with later versions, set it the way you want, click file > page setup, then the default button in the lower left.

Again, that is for later versions of word. It may or may not work in 97.

v
 

https://forums.techguy.org/threads/how-to-change-the-way-word-opens.484252/
Relevancy 43.86%

Ok, I don't know why this happens....I have word documents saved on my computer on a few back up drives. I recently went to go into them and they are now .cts files. What could cause this and why?

I found that if I download and run Crazy Talk software, I can access them, well, from what I read on the internet. I am trying it out now.

A:What causes a word doc to change to a .cts file?

File Extension .CTS Details





Quote:
Detailed information for file extension CTS:

Primary association: ABC Programming Language
Other applications associated with file type CTS:

ClipTrakker (Clipboard Collection) by SoftwareOnline ClipTrakker is a clipboard enhancement /replacement: it automatically tracks every piece of data that goes on the clipboard for later use.
Crazy Talk (Audio File) by Reallusion Inc. CrazyTalk can transform photos and images into talking animated characters and bring them to life with real-time puppeteering; turning any PC into a face animation movie studio. This association is classified as Audio.



Have you ever used these applications?

http://www.sevenforums.com/microsoft-office/166433-what-causes-word-doc-change-cts-file.html
Relevancy 43.86%

Hello. I have searched this forum but have not come across the answer I'm looking for. I know you can't put an IP address in your signature, I know it is not allowed, but have noticed that some people have reduced the IP address to a word or two and this does seem to be OK. First, is it OK to do this: I guess it must be because some people do it but me being so new maybe I'm not allowed yet. If that's the case, no problem. If I am OK to do it however, would someone be kind enough to tell me how to do it?
Thank You.....Go Phillies!!!

A:Change an IP address to a Word

When you post, click on the icon that looks like sunglasses in front of a globe, after you highlight the words that you want to appear in the post. Then put in the address, in the clicked icon. This cannot be used to give an address in your signature.

http://www.sevenforums.com/customization/119863-change-ip-address-word.html
Relevancy 43.43%

Did microsoft change the fix it tool. I can no longer find what I'm looking for. I used to just google microsoft fix it. Now, when I do so, its a different address and looks completely different. Thank you! 

A:Microsoft fix it change?

Hi <--ThisGuy Microsoft provides many, many Fix-It utilities, all of them are for specific use, so there's not one that is "general". Which one are you looking for in particuliar?

http://www.bleepingcomputer.com/forums/t/593240/microsoft-fix-it-change/
Relevancy 43.43%

hey,

I currently have user accounts set up on my computer but it is really starting to bug me. There are like 5 accounts and they take so long to load and everyone who has an account agrees on wanting to get rid of them and sharing 1 computer account that doesnt go onto the user selection screen when the computer turns on but automatically loads that 1 account without having having to logon. We really need someone to guide us on how to do this and keep all of our files on at the same time without deleting them (joining them togethere on this account). Any help would be greatly appreciated. thx.
 

Relevancy 43.43%

I am editing a document with a lot of photos, and text boxes for captions and notes. When I change the font in one text box, it changes the fonts in the whole document. I am wasting a lot of time trying to fix it without success. Can you help please??

http://www.techsupportforum.com/forums/f10/ms-word-font-change-in-text-box-387781.html
Relevancy 43.43%

Somehow my word documents were changed to a DOC File(doc) that opens with Internet Explorer. I can no longer open the documents. I tried opening my Passport which I use to back up these files and they were changed there also, I tried System Restore with several different restore dates with no success. The details stated System Restore did not complete successfully. An unspecified error occurred during system restore. Also I am no longer able to open Windows Media Player. I would appreciate any suggestions on how I can solve these problems. Thank you in advance for your help.

A:Word Documents Change Files

Word documents are a .doc or .docx for word 2007 and newer.
All you need to do is change the file association from IE to Word.

Hit Start from the right column click default programs from the list select Associate a file type or protocol with a program, after the list populates scroll down to .doc select it click on change, then browse, navigate to to word.exe and select it.

http://www.techsupportforum.com/forums/f217/word-documents-change-files-662569.html
Relevancy 43.43%

Hi,
When I put the cursor over any Word document, the "title" shows up with the same description ("Dear xxxxx") on all documents.
How can I change that?
Thanks,
Richard

A:Word: How Do I Change The Title / Template?

Well i tested this and it just displayed the title of my document if you could post a more detalied description the nI could further help you if you can't wait youi might try the help files on MS word

http://www.bleepingcomputer.com/forums/t/71781/word-how-do-i-change-the-title-template/
Relevancy 43.43%

Hello! A long time problem I have had in Word 2003 is sometimes when I use the backspace key, the text immediately in front of the cursor changes to a different font. Usually three or four words change, and it always changes to the font "page number + italic". This has happened in hundreds of documents - some I have created, some have been sent to me by others. It does not always happen, and it can happen intermittently within the same document.

I have tried and tried to fugure out what on earth is causing this. Any help would be VERY much appreciated! Thanks.
 

A:Backspace causes font change in Word - sometimes!

hi Smedley,

Looks like that when you are backspacing you are removing the paragraph format marks.

The text format is specified in these hidden marks at the end of each text format block.

Click on the ¶ symbol in the tool bar to show these and you will be able to see if that is the case.

Click ¶ again to return to them not being displayed.

HTH
Hew
 

https://forums.techguy.org/threads/backspace-causes-font-change-in-word-sometimes.755745/
Relevancy 43.43%

I use Word 97 and somehow my default view for all documents got changed from "normal" to "online layout view" and I can't seem to figure out how to change it back. Any help would be appreciated.
 

A:Change default view in Word

this is going to sound too easy
(i use off2000, should work for you though)

open word
with the default (ie normal/default document) open only
view
normal

close word
you may or may not get the 'save changes to global settings' etc prompt - if so, click yes

open word again and it should be the normal / last view oyu had
 

https://forums.techguy.org/threads/change-default-view-in-word.66352/
Relevancy 43.43%

Hey folks - using Word I have the default Normal dot modified in Word to my taste When I open from any normal Word shortcut it opens to the modified NORMAL settings as desired Times Roman pt etc However I - Change Different exe of Normal.dot for It? How Word Can Shell I often want to interject a Word doc into a folder using the shell context menu Normal.dot Different for Shell exe of Word - How Can I Change It? e g right-click - gt New - gt choose Microsoft Word Doc Normal.dot Different for Shell exe of Word - How Can I Change It? and open a new doc right there where I want to create and save it But whenever I open Word from the shell it opens to the MS-default quot NORMAL quot which uses Calibri pt etc If I manually 'update' the NORMAL style on the spot and click to make it for all future Normal.dot Different for Shell exe of Word - How Can I Change It? documents AND click the quot Change Styles quot at top and choose quot Set as default quot -- it makes no difference the next time I use shell to open Word I get the same crappy MS-default NORMAL template I opened Normal dotm or whatever it is in Word and it was modified So what template is the shell command using and how do I modify it OR set the shell to use the Normal dot template Word uses if I open Word any other way but the shell Thanks

A:Normal.dot Different for Shell exe of Word - How Can I Change It?

When you create a document & modify it to your requirements, you should save it as a Template in a folder located in your Documents file, say in a folder called Word Templates. When you want to us that one again you can select it from there & modify it as necessary.
Doing that should allow you to have the Normal.dotm document format to use in Word if you need to create a completely new document. When doing this it will use the default font, which will need to be change to your preferred font. Once you have created this document & if you wish to save it for future use, save it as a Template & name it with an appropriate name.

http://www.sevenforums.com/microsoft-office/374259-normal-dot-different-shell-exe-word-how-can-i-change.html
Relevancy 43.43%

I have Word Pad set as the default and want to change to Word. I tried to print a document and this notice appeared: Wordpad does not support all of the features of the doc's format. Some content may be missing ot displayer improperly.

I checked control panel's Default Programs but Word's not listed.

All help will be appreciated.

Gloria

A:Change the default word processor.

Generally the easiest way to do this is right click the file you are trying to open.
Choose properties the click the change button.
You will then need to navigate to word manually.
Since you are on 64 bit it should be located somewhere within the program files (x86) area.
Since I don't have it installed on this machine I can't give you the full path name.

http://www.sevenforums.com/software/199450-change-default-word-processor.html
Relevancy 43.43%

Well my cursor was just a Vertical Blinking line before but now it changed (don't know how) anyone know how to change it back to a Vertical Blinking Line? Some people call it the I bar (line before you type). It's annoying me while I do my coursework lol. Thanks

A:How do you change your cursor in Word 2003?

Hi what is it now and are you using XP> Vista etc...?

http://www.bleepingcomputer.com/forums/t/269638/how-do-you-change-your-cursor-in-word-2003/
Relevancy 43.43%

Hi, I am using XP Home and Word 2002. I know that when one is working in Word, and you want to open a file or save one, etc., you just click on the tool bar along the top, and a little (operative word - little) box would open in the middle of your screen. I do not know what has changed, but now when I click on the open file button on the tool bar up top, this giant screen opens that takes up the entire screen space. I think it calls itself "Open." This is a major nuisance to me. I like the little box, so that I can still see the Word document that I am working on. Does anybody out there know what I am talking about? Is there some way to tell Word or Windows to stick to the small box, instead of the giant entire screen box? Thanks for your assistance.
 

A:Solved: Word for Windows -change?

Someone must have resized it. Just resize it back down to something manageable. Put your mouse over one of the corners of the Open box until it turns into a double arrow, and start dragging.
 

https://forums.techguy.org/threads/solved-word-for-windows-change.391478/