Windows Support Forum

Power supply has to go. No, I am not asking which one to buy.

Q: Power supply has to go. No, I am not asking which one to buy.

I had a completely new experience.

I installed a new R9 280 today.
I have a CORSAIR HX Series HX750 750W 80 PLUS GOLD PSU. ([email protected])
I was running an ATI 6870.

Previously I never heard the PSU. While checking out a game a fan ramped up and I thought it the
R9 280. I thought man that's loud. Through some experimentation I found the R9 280 fan noise was not the problem but the HX 750. I cannot tolerate too much noise from my computer so this PSU has to go.

I know the R9 280 draws more power then the 6870 so the PSU is doing it's job.

My question is: How many watt PSU would I need so it won't ramp up....or are there other considerations I need to focus on as well...besides the +12 rating and wattage.

Thanks for any help

Relevancy 100%
Preferred Solution: Power supply has to go. No, I am not asking which one to buy.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Power supply has to go. No, I am not asking which one to buy.

Just get the Rosewill Gold 450w, I think it's on sale.
You won't really find any good passive power supplies.
Relevancy 55.9%

Hey, i'm building a computer but i haven't realized that the power supply i need is an atx 2.0. What power supply should i get??

I was orignally looking at the Ultra X-connect but it doesn't support atx 2.0 Damn.

Relevancy 54.61%

Toshiba Satellite L305-5955, Ive taken apart and replaced power jack. Not directly soldered to motherboard. While still apart, and battery out/in, connected power supply and still absolutely no response. Power supply is NOT original, and slightly different specs, i.e original 19v..6.3A

current 19v..3.1A

A:Toshiba Satellite L305-5955 does not respond to power supply, new power jack

Almost certainly the problem is that the current rating is wrong, if the laptop needs
6.3 A of current, it won't function on less (just as you can't use a 3A fuse for a kettle!)
Unfortunately it must be the right current rating, I know, I've been caught that way too!
Maybe you can exchange it?
Relevancy 54.61%

I picked up this Alienware 5700 off ebay to hopefully refurbish for my son but I'm new at this and still learning and so this thing has me baffled. The laptop is in pristine condition but shows no signs of life. When I plug in the power supply the green light on the power supply goes from solid green to blinking rapidly to the point you can barely see it. To me that would mean a short somewhere right ? If so where ? Has anyone else ever had experience with something like this ? I just don't want to go buying a new battery for a laptop that maybe fried already. Any help would be greatly appreciated.

A:No power, no lights but green light on power supply blinks rapidly

Remove the laptops battery and try the AC power only. If the green light does the same, it still could only be a bad AC adapter, or at worst, a shorted laptop motherboard
Relevancy 54.61%

I have a Dell 8600 about two years old. When I plug in the AC adapter, it intermittently fades to the battery as though the plug was pulled out (its not) and of course the screen fades in an out when every time it swithces--it does it every 30 to 60 seconds or so. I switched to a different AC adapter (I have a Dell 600M with the same AC adapter)-same thing so I know it is something internally. Any ideas?

A:Dell Laptop Power Supply Fading In and Out--power jack is bad or loose?
Relevancy 54.61%

I m interested in the Toshiba G laptop but have heard that you can t use it on airplane seat power It comes with a W AC power supply Vx A but I ve been told that most airlines limit seat power to - W max Lind sells a V car adaptor for the G but specifically won t include an airline plug for this reason which I can get independently of course I ve read some interesting electrical discussions on this board Can ya ll comment on the following or provide any general advice about power consumption Given that the voltage of the laptop and airline seat power pretty much match up - V if the amp draw on the laptop exceeds what the airline power supply can deliver what will happen Will it damage the laptop to feed it insufficient current Will it shut down Supply, Power Airline 120W limitations Toshiba Power G25-AV513, the laptop altogether Merely dim the screen If I remove the laptop battery which requires power to charge it how much will that reduce the power Toshiba G25-AV513, 120W Power Supply, Airline Power limitations need of the laptop I m not sure how to work the Toshiba G25-AV513, 120W Power Supply, Airline Power limitations math but the spec sheet states the battery supplies mAh at A output Does it require the same to charge it Most importantly on my hour transpacific flights will the DVD player work with that ultrabrite screen at the low airline power supply A nice feature of the laptop is that you can watch DVDs without powering up the Windows operating system it has a small linux OS for the DVD player Granted the DVD drive and screen are probably of the most power hungry devices Has anyone used a G or a similar W laptop on a plane The ToshibaDirect support staff were mum on the issue probably for legal reasons Thanks nbsp
Relevancy 54.61%

Yesterday in my house,electric fuse was switched to turn on cooker in my kitchen. During this power delivery was stopped for 4-5 second only.
When power back on then pc automatically turns on and just before bios show me :"?Power supply surges detected during the previous power on ASUS anti-surge was triggered to protect system from unstable supply unit.
Press F1 to continue.? And then pc booted fine to Windows.

Is this normal ? Did it damage something? Why i get that message is this normal?

6700K stock
Asus Z170-P
Corsair 750 RM
Gtx 1080
SSD 1x
Relevancy 54.61%

Ever since i got this new motherboard and CPU ive been having a bit of a nightmare Wont Gigabyte Power up ga-ma790fx - Phenom AMD 9850 Supply & Power with it Gigabyte ga-ma fx-ds -Latest Bios AMD Phenom Black Edition gigs PC ram Corsair XMS CM X - ATI Radeon The problem is that the motherboard will NOT power up at all with the of the latest power supplies watt i have It wont work at all with Nothing happens its just dead Arctic watt Jeantech PSU brand new and working Corsair watt HX PSU working It only seems to work with my Jeantech Watt PSU and i cant for the life of me figure out why Ive tried everything to get the board to work with the new PSU s I had thought that the PSUs i got were dodgy but after testing out one in an older PC it worked fine Ive removed all parts and tried powering up and i cant get it to boot up But the PC seems to work fine with the oldish watt PSU which i find just unbelievable Can anyone help with this nightmare Now on the Gigabyte site the CPU i have isnt listed as supported by this motherboard which is kinda worrying could this be the reason If so how the old Power Supply Wont Power up - Gigabyte ga-ma790fx & AMD Phenom 9850 PSU boots up I just want to have the fracking thing working with the right PSU nbsp

A:Power Supply Wont Power up - Gigabyte ga-ma790fx & AMD Phenom 9850

if I read the specifications right on your mobo... it implies that it has the 4 pin PCI-e input(power) but it also has the 8pin ATX power conector. (it may be simply removing a cap that is actually right next to the 4 pin connector, thus making it an 8 pin connector (thats how it was on my mobo)

Try using the 8pin power with your new PSU, see if that works.
Relevancy 54.61%

Hi, I just bought an HP pavilion e9300 a few week ago. And I am going to upgrade the power supply so that I can get a new graphic card--ATI 4870 which requires at least 500 watt power supply. My current computer is shipped with a 350 watt power supply. I will probably get a 650 watt considering the 70% effeciency of power supply.
However, when I talked to an HP technician, he insisted that I could go for a power supply with no more 450 watt. Because the system I just got has a motherboard which has a max power limit 450 watt. He said if I go beyond that, the motherboard will burn out.
So what shall I do? I really want to get ATI 4870 work well on my computer.
Thx very much.

A:Does power supply with higher power rating really burn motherboard?

The long answer is "No".
Just be sure of the dimensions of the power supply before you order a replacement, as HP uses some pretty strange sizes sometimes, and you want the new one to fit with room to spare.
Relevancy 54.61%

Hello guys.  Can anyone help me understand the power supply on the HP Envy Phoenix 860-019?  The PCIE connector 6 pin connected to the GTX 960 has black and white wires.  Shouldn't there be yellow and black wires?  Yellow is usually 12 volt and black wires ground.  Is the 6 pin connected to my GTX 960  supplying a standard 75 watts of power or something else?  I want to install a GTX 1070 but the 6 pin wire colors are not the industry standard color scheme.  Also there is a 2 pin power connector with a white and black wire.  Usually a 6 pin and a 2 pin can be used together to connect into a 8 pin socket on a GTX 1070.  Will my connectors supply the needed power and connect properly because the color scheme on the wires make no sense. Thank you
Relevancy 54.61%

I have a Sony VGC-RB42G computer. I recently moved my computer, cleaned off all the dust, and when I plugged everything back in, it won't power up. The light on the power supply blinks green, inside the motherboard also has a green light that blinks as well. It has a ticking sound too, but I am not sure if it is coming from the power supply or the motherboard. Any idea what could be wrong.

FYI, I have already unplugged everything from the power supply, pulled out the ram, checked the battery, and put everything back together and still no change. One thing I thought was strange was after I unplugged everything, I pulled the power into the power supply again and this time the green light came on but did not blink. It stayed solid.


A:No Power, Blinking green light on power supply and motherboard

Sounds like a Power Supply problem.
Relevancy 54.61%

Sorry I don't know the proper terms, but basically the pin inside the jack where the power cord gets plugged into on my laptop was bent so that it's really hard for me to plug in my power cord and have it stay in place. My warranty with best buy has expired, so I need to figure out how to solve this problem on my own. I can't just leave it like this because the cord comes out really easily and I can't continue to work with such a tenuous setup. Anyway, is this just a matter of replacing the entire unit inside my laptop? I know you probably need more information, but I'm not sure what to provide, so please ask any questions. The laptop is a Toshia M-45, about 3-4 years old. Thanks in advance

A:Bent power supply pin - Hard to plug in power cord

umm.. bend it back so it's closer to normal? That's all I can say about it. usually works for me.
Relevancy 54.61%

It's been a while since I built a system from scratch and have a... errr... simple question

gfx: Sapphire HD3850 512MB Ultimate (passive)

MB: MSI P35 Neo2 FIR

PSU: Seasonic M12II 500W

The motherboard has a power connector for the graphic card next to the slot.

Is there any reason I should connect the power for the card to the power connector on the board instead of directly to the power supply?

A:Graphic card power to power supply or connector on motherboard?

First time I have ever seen that feature. I like it. I'm thinking that is a neat/easy way to partially eliminate cable clutter from the PSU. Give it a shot, you can always revert to PSU cable if you wish.
Relevancy 53.75%

Hi forum and pc gurus My problem is specified down to my PSU at least I think so W Logisys PSU - maybe the quality has something to do with it I paid for it from NEW EGG I have A Gigabyte GA- P-DS Motherboard a Intel Core DUO Conroe GHz processor with heatsink and get I HELL! POWER FROM PC built HELP! custom power to on! cannot SUPPLY my Fan Sapphire ATI X Pro GIGS of WINTEC DDR PC RAM SATA Maxtor GIG HD inch SATA Gig HD and two DVD Burner Optical Drives both IDE I have it hooked up like this two Optical Drives connected to IDE connector cable which POWER SUPPLY FROM HELL! I cannot get my custom built PC to power on! HELP! is hooked into the IDE input on the motherboard both are set to slave Two CD outs connected one to each Optical Drives to one CD input on the motherboard Both HD s are connected to SATA inputs on the motherboard one is set for master one is set for slave I heard that it did not matter but wanted to state that anyway then my ATI RADEON X is hooked directly into my only PCI Xpress slot The power connectors are then all hooked into their respective inputs on the drives and Video Card ANd last but not least all the Power button and LED connectors are hooked into their input on the motherboard wich I set up exactly as the motherboard diagrams and directions directed I turned the switch on the PSU to on and I only got a faint mouse like squeek then nothing not even the fan So I figured it was DOA so I had newegg send me another I got it today installed it hooked all the power connectors to the hardware then popped the switch to on nothing again and the same little squeeky mouse like noise I have no idea what went wrong and this is my first custom built computer for me so any help would be great In relation I did not wear a ESD protective wristband but I did constantly touch metal to keep myself grounded but I couldnt rule out ESD to the motherboard I hope not but it is a possibility AND what is the possibility that both PSUs were DOA and what is the possibility that W is not enough to power my entire system THANKS GUYS FOR ANY HELP IN ADVANCE Oh and yeah I have it set to V nbsp

A:POWER SUPPLY FROM HELL! I cannot get my custom built PC to power on! HELP!
Relevancy 53.75%

Working on a dell dimension 2400,think may have bad power supply.Anybody know if that model uses a proprietary PSU? or will a regular industry standard one work?

A:Dell Power Dimension 2400 power supply

Should be a standard ATX PS.
Relevancy 53.75%

I shut down my Pavilion Elite for 1 week while away and now it will not turn on. The power supply light is on, I replaced the CMOS battery and the power switch is ok.

A:Pavilion elite power supply light on, won't power up

As you did not mention any message or display on the screen, I would use this tutorial for a step by step diagnostic.  It also helps to remove the side panel, and visually watch the CPU and rear case fan movement(s).  As you press the power button, pay attention to the fans. Also does the Power Supply LED stay ON? Or did it go OUT when you pressed the power button?
Relevancy 53.75% we finally got my girlfriends new PC up and running. The problem im having...or more of a concern really. Is when you flip off the power supply, and then flip it back on, the PC gets a short burst of power. IE the lights and fans all come on for a second or two. Then you can press the power button and turn it back on.

Any ideas guys?

Relevancy 53.75%

Ok so it's time again for me to pick a new power supply however I'm in need of some help determining the appropriate wattage for my hardware setup AMD Phenom II X nm AM GSkill Ripjaw X GB Dual-Channel DDR MHz - - - new a Consumption-Picking Supply Hardware Power Power Corsair TX w I dont think its the V ASUS M A AM r here are the voltages listed on speccy if they are of any use V V V V CPU CORE V VIN V VIN V V V VIN Hardware Power Consumption-Picking a new Power Supply V VIN V VIN V ASUS ATI Radeon HD x in Crossfire w ea GB Patriot Pyro SE SSD GB OCZ OCZ-ONYX SSD LG HL-DT-ST DVDRAM GH NS ATA I have terrible luck with random bsod's and power supplies pooping on me I want to pick one this time that will last me Also I have my power running through a Monster Power HT I live in a new apartment so the wiring should be ok I've dusted out all Hardware Power Consumption-Picking a new Power Supply of the components inside the case double checked my connections all that jazz I've got a cooler over my memory I am still using my stock cpu cooler but thats changing soon I get crashes idle too Any help I could recieve I would appreciate thanks Andrew

A:Hardware Power Consumption-Picking a new Power Supply

You have pretty much the same problem as me (getting BSOD's randomly). For me it's bulging capacitors on motherboard. You should take a closer look for capacitors on your motherboard. Dead capacitors look something like that:
Relevancy 52.89%

My first post I received my new DVD DL -RW drive today and eagerly installed it I of course unplugged my computer s power supply while doing it After plugging the power back in the green up power disconnecting after power supply Computer won't LED on the back of the CPU started blinking never noticed this before and when I hit the power button NOTHING happen No fan Computer won't power up after disconnecting power supply turns no lights nothing When I unplug the power supply the green LED blinking gets slower and slower and after about minutes it totally stops I plug the power suppply back in and it starts blinking all over again and still the power won t turn on All I did was replace a CD-ROM drive with a DVD Multi drive I didn t mess with anything else so there should be no power supply shortage or problem Any thoughts as to what could Computer won't power up after disconnecting power supply be happening By the way I have a year old Compaq computer with ghz Athlon gig RAM no problems thus far nbsp

A:Computer won't power up after disconnecting power supply

While installing the new optical drive, you might have inadvertently loosened one or more connectors. Recheck all data and power cables to make sure they are tight, including all those to the motherboard.
Relevancy 52.89%

Hi everybody I tried to search on google about this but it s not really help and it never happen to me before so I post here My PC was running normally for a long time just couple weeks ago I sent supply or button problem? power Power my faulty video card xfx nvidia ultra to get warranty service and they sent me back another The new one works fine but Power supply or power button problem? a week later I tried to turn on my computer and there s no power at all No lights on Power supply or power button problem? no fan running just no sign of power So I check inside if there s any wire from the PSU is unplugged but everything looks good nothing seems wrong I m sure the power from the wall is good and the power switch on the back is on So I tried to check the wired again push the power cable to the mother harder and press the button it worked But that doesnt solve the problem if I put something heavy near the PC or the desk is vibrating a little bit the power turns off I press the power button again it would not turn on until I open the case and press the power cable to the motherboard harder it s on I then close the side panel it s off no power This is really annoyed me I dont know what else to do What caused this problem The power supply or the power button Can somebody help me My system specs ECS G T-M mobo Intel E Duo x GB RAM x SATA HD nVidia ultra video card ULTRA s watt PSU nbsp

Relevancy 52.89%

Hi I m currently a computing student so I rely won't up power (poss. Computer supply) power on my computer a lot for my studies and was hoping I could get some quick advice troubleshooting on here So here goes I ve had a problem with my computer recently it s been working fine Computer won't power up (poss. power supply) for a year or so with no problems and then one day i tried switching it on and nothing happened I tried once more and then the power short circuited I then had to turn the power back on from the mains switch The strange thing is my housemate had exactly the same problem and after searching for the answer he was told it was due to a static buildup and the solution was to take out components graphics card RAM e t c and put them back in I tried this and no luck I was thinking due to the short circuit there may be a problem with a fuse in the power supply other then that I m completely stumped and would appreciate any help given Many Thanks for all help received nbsp

A:Computer won't power up (poss. power supply)

Does it happen with any other appliances? as in does using the toaster while using the kettle While your mate is in the Electric shower, telly on, or ironing?

Possibly a static build up, it is possible, Wher are you situated??
What voltage are you on?

What is the make and model of your comp? is it the same as your friends?

is your machine custom built or is it a brand?
Answer a few of them and we will try to narrow it down 4 you..

Mean while if you could get your hands on a spare PSU that would be handy. And remember when dealing with PSU's alway leave them to sischarge for at least 24hrs,
the 3 D'S, Disconect, discharge, dismantle.
Relevancy 52.89%

Ok so lately I have been getting a BSOD at very random times and it looks like a Diver Power State failure. SO all of my friends and every website I go to makes it seem like I need to get a PSU. Right now I have a Quad Core and a 8800GT and 375W PSU. So my friend told me to get a new 700W PSU.

So, if the only fix is to get a new PSU? I tried to rollback my GPU driver but it didn't help.

So any ideas?

A:Driver Power Failure = New Power Supply?

You're greatly risking the health of your whole computer while running with such underpowered power supply. Do yourself a favour and get a quality PSU. That's the cheapest one that is enough and of good quality that I could find with a quickish search.
Relevancy 52.89%

was watching dvd and pc cut out completely... high pitch beeping comming from my power supply on hp 110 desktop... when i unplug from tower beeping stops .. plug it back in and it resumes.  No power, no flashing leds ... just constant beeping... no pattern ... just beeps continuously.

A:constant beep from power supply... no power to pc at all.

let me be clear.... beeping not coming from tower.... it comes from the plug in power supply... the square box part of it.
Relevancy 52.89%

I have a server that I would like HD Power Supply Question Power Consumption & to upgrade to TB Hitachi HD s They claim max startup current of A and idling down in the A range The platform will be a -series X with a Core Duo Graphics card is small does not even require aux power connector Not needed to just supply the KVM with x No other signficiant sources of V drain exist other than the MB CPU a slim CD-Drive for installs a slim floppy and one additional GB Power Supply Question & HD Power Consumption SSD startup drive W when active I am looking at an W Corsair I ve heard these are quality supplies and I don t want Power Supply Question & HD Power Consumption multiple rails since no one really knows what sort of Voodoo goes on as to how they divide multiple rails up And I don t want to get into that I will be using a single-rail V PS I can add a second if I need to but I d rather not Do you think this will be sufficient for handling Hitachi hard drives quot Green quot drives are a non-starter since they will drive my Raid controller and then me off the deep end with TLER issues I do have staggered spin-up control of the drives with the controller Thanks for any help nbsp

A:Power Supply Question & HD Power Consumption

Power Supply Question & HD Power Consumption, Pt. 2 - Laptop vs. 3.5"

My second question is this - I have a BTV server that needs to be on at all times during the season to record shows during day and evening.

Suffice it to say that you CANNOT reliably put one of the critters into sleep/hibernate mode and expect it to wake up and reliably record a show. It just won't happen.

Now, this is one case where I can use "Green" 3.5" drives, but I am also considering banking 500GB 7200RPM or even 5400RPM laptop drives. These will all be on a raid controller, but since they will be in pass-thru mode or RAID 0 mode the controller won't freak over TLER like it would with RAID 5/6 and mark the drives bad. The controller also has more than adequate cache to handle a 5400RPM spindle as OTA HDTV generates little more than 2.5MB per second per channel. Even 4 channels at once is 10MB/s and that should not tap the ability of a 3Ware controller with cache on 5400 RPM RAID 0 or even pass-thru drives.

My question is this - 2 500GB laptop drives burn much less startup and idle current than a single 1TB 3.5" drive. Has anyone tried running multiple laptop drives on a RAID controller, and what sort of luck have you had? What sort of sustained throuput can you obtain?

Electricity is a huge factor here, at 12 cents per KWh. I can recover the marginal cost of 2 500GB laptop drives vs. 1 1TB 3.5 drive.

Case construction and drive cages are not the issue here.
Relevancy 52.89%

Hey, got quite a problem with my laptop.. It's a Medion Erazer X7813, worked well for ~2 years.
I was doing a graphics card benchmark yesterday and it stopped in the middle of it(monitored temperature, it was at ~80 degrees Celsius when it turned off). No bluescreen or anything just off and I couldnt restart after that(no fans nothing). I thought it might be the power supply, so I tested it, but it was doing 19v when not plugged in, but when I plugged it in and unplugged it again it was at 1v. When testing I unintentionally shorted the power supply and it showed 1v after that just as it did after plugging it in, is it shorting inside the laptop? Could it be the battery or something more serious like the MB? Any ideas are welcome!

A:Laptop gets no power, power supply seems to be working

The charging circuits on the laptop motherboard may be shorted...
Relevancy 52.89%

Finally broke down and started building a new system - I m too old to game this all started out as a home video project Anyway - gathered all my components now I m working to assemble them The case power plug. fan power New for supply, no schematic, looking came with New power supply, no schematic, looking for power fan plug. an Okia Model -ATX power supply But no wiring schematic I m trying to identify the power supply fan plug - what New power supply, no schematic, looking for power fan plug. seems to be it doesn t at all match the connector on the board And I ve got that positively identified by the board manual The board has a small male pin connection The only thing I can find that might be the fan connector coming from the supply is a small pin plug at the end of of the New power supply, no schematic, looking for power fan plug. strings of drive power harnesses Nothing tucked up behind the supply case or anything Is that likely to be it Or would that be for a floppy or something I tried to Google for a wiring schematic but could find nothing In fact nothing much at all on this brand of supply - just a couple places that sell them Please don t tell me I got an el cheapo that isn t worth having At the risk of getting ahead of myself in case I need to adapt something like that to the different style male connector on the board in this case or something else I may find as i progress is there some type of source for adapters or what would I do Bear with me this probly won t be the last question I ll dream up - just getting started While I m at it - the board manual talks about a connector for a power supply that senses board temps - that s another reason I d like to find a schematic or some sort of instructions for the power supply OH The connectors for the fans in the case don t match the connector on the board either The board has another small male pin connector for the case fan s but these have a larger bigger pin pin connector Again - I suppose it s adapter time Guess I ll need that source Thanks for helping an quot old quot computer student still and probly always in a definite learning curve nbsp

A:New power supply, no schematic, looking for power fan plug.

There are basically two voltages available to you: 5V and 12V. Doesn't really matter where you get it from - some pin on the mobo or some wire from the PSU.

From the PSU the yellow wires are 12V and red ones 5V, black is ground. The fan voltages should be written on the fan itself, the black fan wire is ground, red may be 12V or 5V depending on the fan voltage.

Fan headers on the motherboard should be labelled so, check with a voltmeter what pin gives out what.
Relevancy 52.89%

So I hooked my pc up after I took it w/ me to work becuase I though I was going to a lan tonight. But when I came home and plugged it back. I noticed the power supply box light was blinking. And it wont turn on. No power or what so ever. I need help BADLY


A:Power Supply Light Blinking. No Power :(!

Have you opened case to make sure all connections are secure? Something may have come loose while you were transporting it. Give us more info about your computer (e.g. make and model, cpu, ram, name of psu, etc.)
Relevancy 52.89%

Hi All Happy New Year to all members and technical assistants I have a little issue in which I require some help and guidance I have a PIII MHZ replaced power Pc supply after wont power on MB Pc wont power on after power supply replaced memory with a ASUS MB- Recently it died on me and assumed that the reason Pc wont power on after power supply replaced I could not get to power it up is due to my power supply I went out and spent the money and bought a brand new power supply from a computer retailor I saw him remove it from a brand new case I Pc wont power on after power supply replaced installed the power supply trying to power it up I can see the fan rotate a little bit but not enough to power on Changed socket and it power on It booted up but after sec it shut itself off and now I cannot power it back on until min later when I went and change power socket once more This time the power did not stay up very long As soon it powered up no more than min later while it was loading windows Xp it shut itself off nad now again can t power it back on I have a power extention and power bar in which I used and both shuts the computer off Anything else plugged to it doesn t seem to do any affect This is the second new power supply I m trying What else can it be I have not tried to place the computer in a different room on a different plug yet I will try that tonight but in the meantime what else can I try Thanks for your help and listening Cheers nbsp

Relevancy 52.89%

Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp

A:New Build no power-up: case's power supply or MB?

Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.

So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.

So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.

now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
Relevancy 52.89%

I have a generic MB (P-120 CPU ) which I just switched to a different case and power supply. It has an extra "six pin power type connection" in the middle of the board. Only one supply that I have matchs this and the wires are three green and three black. What is the funtion of this connector, it looks from the wire colors to be some form of switch.

Its a case of not wanting to swap out the power suppy from my other unit unless necessary. I have 4 other supplies and none have the extra wire, which is listed as P10.

Many thanks in advance.

A:extra power leads on power supply?

Sounds like typical extra +5V lead and can be used for any number of things...(riser cards,backplanes,to drive extra slots, etc.)
Without knowing the specs. on your motherboard this question is impossible to answer...Post Mobo identification (make/model) or obtain FCC ID and post that. Perhaps we can find a more definitive answer for you...BOL
Relevancy 52.89%

My power supply died a few days ago and I have replaced it. My PC will now boot but will not send a signal (turn on) the monitor. Everything on the PC seems to work but it just will not turn on signal to the monitor. I have tried two different monitors with the same result.




Relevancy 51.17%

Somebody, please tell me what this is and what's it used for?

Relevancy 51.17%

I have a Delta DPS-150GB B Power Supply out of an Apple Macintosh Power Mac computer. I would like to use it as a 12v/5A power supply for my model train layout. I have a couple important questions:

1) I need to know the pin-outs of the connectors (1-4pin, 1-14pin, 1-5pin on ribbon wire), specifically which ones control start-up and various voltage outputs.

2) Being a Switching Power Supply, I think there must be a load on at least one of the output rails. Can I create this with a simple resistor of some sort? if so, how exactly what would I need to do.

I can email photo of the connectors if that would halp. I would appreciate any help. Thanks.

Relevancy 51.17%

HP Palvilion m c Motherboard IPIBL-LA Berkeley http h www hp com ewfrf wc lc en amp lang en amp lc en amp product amp task N Power Supply DPS- ab- a http www itwinkle com hp posu html Hello all this is my power Is NO motherboard? it or supply POWER, first post First let me thank all NO POWER, Is it power supply or motherboard? for being here and sharing your vast knowledge My PC and power supply is above web-links included for more accurate description Also I have scoured this forum internet attempting to resolved and yes there is a ton of info The problem is the I cannot find specific details quot similar quot to my problem regarding how they determined the repair action other than replaced power or mobo So hopefully when this is resolved this will help someone with my similar problem - Problem gt PC will not turn-on just as if not plugged into power source -- Sypnopsis gt Nothing unusual happened as far as I know Shut-down PC for the evening as usual next day went to turn it on nothing - Troubleshooting accomplished -- Checked power outlet amp cords checked good -- Green light on back of power supply is steady green normal indication -- Removed power supply to test with multi-meter Strapped jumpered pins green wire with ground blk wire All appears normal everything is in range of specifications values below pin pin pin pin pin pin pin pin pin pin pin - pin pin pin -- Tested my power button wires for continuity on PC case properly shorts -- Reassemble everything still nothing -- Disassemble entire PC motherboard is sitting on cardboard box --- Items plugged into motherboard -pin atx plug and from NO POWER, Is it power supply or motherboard? power supply -pin plug volt from power supply gig ram stick CPU amp CPU fan - Goal gt power-on motherboard -- Tried shorting power button pins nothing -- Tried shorting reset pins nothing -- Jump-started NO POWER, Is it power supply or motherboard? atx plug with paper clip POWERS ON See link below for example http www youtube com watch v FCspIGgBV amp feature related Unfortunately unlike the youtube video when I remove the paper clip I lose power and back to square one - Back to the PS tested PS with strap jumper on when I remove the strap the ATX loses power through its plugs though the green light stays constant green There is no external on off switch on the power supply -- Should the power supply lose power once the strap is removed -- If so how does the power supply know to stay on -- Any help is much appreciated trying to determine if power supply is bad MOBO etc and if I can repair it Also I cannot swap items I do not have any additional parts laying around ADDITONAL NOTES - When powered on the mobo pwr-btn pins and the reset pins have voltage accross them volts dc pwr btn pins though has quot NO quot effect when shorted volts dc reset pins resets when shorted it works the way it should - Attached additional items to see if I could fully boot PC System Fan note will not boot without this fan plugged-in quot ERROR System Fan Has Failed Service PC to prevent damage to the System Press F to continue quot video card geforce gt hp pn- key board plugged into PS keyboard port mouse plugged into PS mouse port Hard drive When strapped I can boot competely up and log-on to desktop When I choose quot restart quot via windows soft button it resets properly When I choose quot shutdown quot it will shutdown but then I have to remove the strap and reset the cmos I get no display unless I reset the CMOS to boot up properly again I m guessing ultimately its the power supply Since the problem directs back to losing power The PC boots properly when I make the conditions right so that would most likely eliminate a motherboard or cpu problem What I don t understand nor can I find any info on is how does the power supply stay activate I m aware of the shorting of the power button pins on the mobo Probably thinking too much into it but the power supply seems to be working accept for the mystery quot no po... Read more

Relevancy 51.17%

My PC suddenly shut off and wouldn't turn on, but the mouse and motherboard lights were still on. A tech took my PC and ran some tests. I assumed that either my Power supply or my Motherboard was unfunctional but he called me back telling me that it was neither, and that the problem was coming from "a part" that gave power to the motherboard. The replacement of this part would cost $80.

Am I getting ripped off? What part could possibly cost $80 and isn't the Power supply?

Relevancy 51.17%

I have a Windows XP Home Edition SP computer GHz MB Ram GB HDD Last week I installed SP on my computer because I had SP and decided to upgrade A couple days later when I click on quot turn off quot my computer restarts NOT shutdown When I click on quot stand by quot The screen goes black then I get a quot blue screen quot Like in Windows But it Power Supply Power or Strip? s dark blue and stays up for only a second Then the computer resets The next day my computer stopped Power Supply or Power Strip? that but Power Supply or Power Strip? then As soon as I press the power button the TV in the living room goes all fuzzy I turn it off I remove the power strip thinking that it went bad I do use every plug but other power strips in the house are full too I plug it directly into the wall The restart stops still fuzzy I unplug ALL the connections in the back of my PC except the Power and monitor It stops Plug it all back in Put it in another outlet in my room Does it again Change HDD power cable motor could be causing this I finally realize that it s the TV tuner card The cable connection is already being split into ths I had a bad plug on the TV splitter so the fuzziness got fixed I put the power strip back on and the restart is going on again I tried on a outlet too Why is my computer restarting when I click quot Turn Off quot Is the quot shutdown exe quot corrupted nbsp

A:Power Supply or Power Strip?

Check your power management settings (and reinstall software if needed, from the manufacturer website). I've run across many problems with SP2 messing with power management settings...
Relevancy 51.17%

Ok so i do know what the no Power and supply 100%, mobo are power problem is this is more about what i can do to use my computer until i can fix the problem Ill start off with what the problem is My computer wont turn on from the get go i knew the power supply was okay Power supply and mobo are 100%, no power because the mother board has a green light on it showing that its getting power of course just in case i tried putting a new supply in but there were no changes At first glance the mother board looked good No blown resistors or anything of that sort i sent it to a friend to check it out though once again just to be thorough and sure Finally after Power supply and mobo are 100%, no power hours of tedious searching i found the problem The chip that the power button plugs into has blown out Very happy thats all it is Now my question to all of you is is there anyway to bypass using that board so i can run my computer until i replace it if i just unplug the little board that the button is a part of the computer obviously does not turn on when i attach the computer to power and i dont know how i can trick it into turning on without having the use of the power button Any info would be greatly appreciated Thanks Ryan nbsp

A:Power supply and mobo are 100%, no power

There are some motherboards that have a power on button directly on the motherboard. I don't suppose you have one of those? There are some BIOS' that can enable the keyboard to power on the PC by pressing any key. I'm using one of them now. Of course, the problem with that is to get the PC started in the first place so you can change the BIOS setting (if it has that setting).

What motherboard do you have?
Relevancy 51.17%

hey I have an interesting problem supply jumper power and power When I plug the atx power supply into my motherboard as soon as it makes contact the psu fan spins about times then power supply and power jumper stops which i suspect means its testing to see if it works or something But i have a computer out of the case and i power supply and power jumper might have made the fatal mistake of useing a paper clip to quot jump start quot the motherboard by contacting the power jumpers now whenever and metal contact is made paper clip the actual start mechanism anything it won t cut on Well me thinking i must have messed up the jumpers cut the psu green and red cord i double checked to make sure they were the power on cords and twisted them togeather and put electrical tape around them I know its not the best job but i was just testing a theory When I plug in the psu and its plugged into the motherboard the psu fan becomes turned on because of the twisted on wires and spins But the cpu fan and motherboard remain powerless I am wondering if i ve done something wrong or have screwed something up any help would be appreciated ps before the problems begain i installed the motherboard into a case because it was just components and i founnd a cheap case When I installed the motherboard I screwed metal screws into the contace points where the motherboard is supposed to rest I heard somewhere metal is bad for the bottoms of motherboards so that could be it thanks nbsp

A:power supply and power jumper

Disconnect External Power To The Wall Socket Before Messing Around In The Box!!!!!!!!!!!
Relevancy 51.17%

Would a 500W power supply power this

AMD Phenom II X4 955 Black Edition


Nvidia Geforce GTS450 1GB PNY

Gigabyte SKT-AM3 GA-880GM


DVD RW Drive

A:Would a 500W power supply power this

Hi QGamez,

I reckon a 500W wouldn't be enough but a 750W may be the right one. I had a look in a few forums and they had 650W & 750W etc but not 500W.

But wait for more input from the others and see what they have to say
Relevancy 51.17%

Went to dinner left PC running Came back PC shut down Would not restart no power lights fans LEDs nada zip zilch We had a brown out a few days back I figured the power supply finally crapped out supply...still no power power!? new installed Tonight installed a new power supply Antec Smartpower w No installed new power supply...still no power!? change I push start button absolutely nothing I have checked a power at outlet OK b changed power cords original is installed new power supply...still no power!? cord OK but I notice when I insert the plug into the recepticle there is a spark Now I m not much of an electrician but I don t think there should be a spark for just plugging it in c I have plugged my backup PC this one into the same outlet on the surge protector and it s running fine soooo the problem is in the computer If I plug the power supply in shouldn t the PS fan run It doesn t Can there be something bad on the shudder mobo like maybe the start switch or something Also confusing me I have sata HD this new PS has power plugs for sata My old power supply only had the regular pin plug that I plugged into the sata HD yet it ran fine Do I need to use the sata plugs on the new PS Cripes I m so freakin computer impared Please need help this is my gamer PC and I m a BF junkie Thanks for viewing this thread AMD GA K NS ATI XT mb Turtle Beach Santa Cruz gig PC XP Home sp nbsp

A:installed new power supply...still no power!?

Is the LED lit on the MB? Try bypassing the front case switch by putting the blade of a small screwdriver across the pins on the MB that the switch connects to.
Relevancy 51.17%

Came home walked in and noticed my PC was off monitor was on speakers on modem everything on as if the power had blinked out for a sec and my system had shutdown No Supply, lights no to Power power I pressed the power button on the front and got nothing i checked the power supply s own power on off switch on the back and got nothing no light that its on or anything thought maybe it was the cable so i plugged it into my other pc and the No power to Power Supply, no lights cable No power to Power Supply, no lights works so i m thinking maybe the psu went bad or took a hit Im guessing i just need to replace it How difficult is it to replace it by yourself i ve never done that before and do you think that its the psu at fault I m thinking that if there is not power on light then something is wrong big with it my heat temps stay down between C and C at the highest Also can i replace it with just any other w power supply or does it need to be a specific kind company i bought it from online listed it as dual core certified w psu no mention of v rail or anything else i guess i can get that from them if they have it on file nbsp

A:No power to Power Supply, no lights

Well sounds like your power supply took a power surge. Well to start with i would try a power supply. Now about replacing the power supply cheap is not the best way to go, learned from experience. Here is my recommendation:
And for replacing a PSU not hard. If you need help removing it Post back i will walk you through step by step if need be.
Relevancy 50.31%

hi guys as per one of my friend I could replace my memory RAM up to GB so I ve ordered Power Light Motherboard/Power 8300 AMBER Green XPS - Supply - Light a couple sticks of Kingston HyperX nbsp so I ve took slot and replaced GB Hynix RAM by GB HyperX Now I have a good old CPU that doesnt work plus it smell like burnt plastic with no apparent damage to XPS 8300 - AMBER Motherboard/Power Light - Green Power Supply Light the board or RAM nbsp Startup x BEEP No BIOS Motherboard Light Solid AmberBootup Light Flashing AmberPower Supply Light Solid Green I ve tried booting from nbsp a single RAM unit on slot one then slot two and nothing has changed anyone can help Motherboard Y MRGhttp www findlaptopdriver XPS 8300 - AMBER Motherboard/Power Light - Green Power Supply Light com specs- y mrg-dell Processor i Primary SSD Kingston HyperX Savage added Secondary Seagate TB TB added Barracuda New RAM nbsp ts HX C FK http www kingston com dataSheets HX C FK pdfOld RAM nbsp HMT U CFR C-H https www amazon com PC - - MHz-Hynix-HMT U CFR C-H -Unbuffered dp B BTRAS
Relevancy 49.45%

I just purchased a new Dell PC.  I now get this message when I turn on my speakers:
power surge on the USB port. Unknown USB device needs more power than the port can supply. I have no idea why or how to fix it. Can anyone help me?

Relevancy 49.45%

For the last two weeks every time I start my Dell INSPIRON E while using the power supply I am greeted with the following message quot The AC power adapter type cannot be determined Your system will operate slower and the battery will not charge Please cannot Supply power - AC type be determined....." "The adapter Power connect a Dell W AC adapter or higher for best system operation quot I press the F Key and everything works fine I ve read about this on other websites and most say it s a design Power Supply - "The AC power adapter type cannot be determined....." flaw in the power supply after the cord has been properly wound around the supply as designed Apparently a few of the cords internal wire strands Power Supply - "The AC power adapter type cannot be determined....." become broken and cause this message My computer is from June and shouldn t be having this issue so early or ever This seems like a flaw that should have created some type of manufacturers recall since so many people are having this issue I m of course out of warranty will Dell replace this free of charge nbsp

A:Power Supply - "The AC power adapter type cannot be determined....."

You are correct, the failure is due toloss of the power supply ID signal. Sometimes this happens because of strain on the plug, which breaks the signal wire. Some even are so severe that the insulation breaks away from the plug; this is due to rough handling. The other cause is one or more of the power socket solder connections to the system board become broken. This also is related to severe handling. I have seen one case where all three power connections and three of four mechanical connections were disconnected. If the power supply is bad, a replacement will cure the problem. If not, then the socket is bad, and this will require a system board replacement. If you are experienced, you can try to resolder the connections. I am experienced and was not able to get my daughter's E6000 to work by resoldered. More recent Dells are using a replacable power connection board which is a much cheaper repair.
Relevancy 49.02%

I am running a 1.2 Athlon w/ 385mb ram, 40gb Samsung and 30gb Matrox, Lite-On CD/RW and Ricoh CD/RW. Last night I left my computer on and this morning to my surprise it was off, and i tried a couple of times to turn it on, but then i realied that my power supply was fried. So i changed the power supply now eveything is working, but i was wondering is the reason that my power supply fried because it is not enough power for my system? I am currently running a 250W, could you please guide me to what i would need to run my system better. Thanks

Relevancy 49.02%

Have a machine that the power supply died on. So I took an old small watt PSU from an 8 yr old machine and put it in. It died right away. Is there anything in the machine that can cause the PSU to burn out? I don't want to spend money on a brand new 500 watt only to have it fry when I hook it up. My other option is to use the older P3 machine and set up my hard drive on that one as a slave so I can get to my data.

Relevancy 49.02%

Got a question in concerns to my power supply. At boot up my
vcore 1.49v
+3.3v 3.26v
+12v 11.98v
DDR 2.50v
AGP 1.50v
Chatemp 22C
My power supply is 300watts and as the day progresses I get a fare size voltage drop with things changing to:
vcore 1.47v
+3.3v 3.22v
+12v jumping back and forth from 11.67v to 11.98v
DDR 2.49v
AGP jumping back and forth from 1.47v to 1.49v
Chatemp 40C
CPU 43.5C
My system has locked up twice now on me and only locks up later in the day. It's about a month old and my husband built it for me. Was wandering if these voltage settings were normal to drop or if I should tell him I need a bigger power supply.

Thanks for any input:


Relevancy 49.02%

Need to know how big a power supply is required for a AMD 2100 chip and fan,or If the 235 watt that is being use is ok ?

A:power supply

Welcome to TSG!
In determining what size of Power Supply is required there are more factors to consider. Here is a site that will give you hard numbers to work with to calculate the size. After size is calculated I usuually factor it by 25% to give you some breathing room.
Also you have to make sure the Power Supply is AMD Approved.

Relevancy 49.02%

i have a cd rom a cd burner one 2 gig harddrive i have another 2 gig hard drive i am trying to install everytime i put it in it the cd burner vanishes why ?? and how do i fix?? the problem please help soon thanks...

Relevancy 49.02%

hello i cannot power up my laptop via the powerpac. i can only power up the laptop with the battery. when the battery is used up i have no laptop. and the guy at work ran a check on the power pack and said it was ok. he said i shorted it out somehow. please help. and it is not the cmos. i somehow need to charge the battery. thanks i forgot to mention that the power supply section on the motherboard is fryed.[

A:power supply

Moved your other thread to hardware and closing this one.
Relevancy 49.02%

im building a computer with a gigabyte motherboard with a amd athlon 64. I have a 250w power supply, is that enough? i dont want my new system to catch on fire or anything.

Relevancy 49.02%

Client has HP Pavillion Slimline S3307c PC Desktop Computer, AMD 64x2 Dual Core Processor 4200+, 2048 MB Ram, 320 GIG HD, Running Windows Vista Home Premium. Needs a replacement power supply, have looked on line, but do not trust some of the sites. Power Supply part number, HP P/N 5188-7520 160 Watts. Would like to find OEM but after market could be all right if necessary.

Thank you again as this site had been most helpful in the past in helping me troulbeshoot other clients computers.

Still Learning, Learning Still


A:Power Supply Help

Look at the old power supply and it will have a HP part number on it.
Relevancy 49.02%

hi, I have a hp elite 8200 sff and I am wondering what wattage the power supply is,


A:What power supply do I have

HP Compaq 8200 Elite Small Form Factor PC: here are the specifications on a standard one from HP:

However, If you want to make sure and you know what you are doing: here are the directions on how to get the information you are looking for:
Relevancy 49.02%

Hey Guys,

I recently bought a new Case for my PC, just to provide more space and air inside to make it cooler, plus it looks cool

But anyway, my problem is possibly the power supply. If say im playing a game, Mainly World of Warcraft, My computer will just Die, as if power has been literally cut. The Wiring between the PC and the mains is fine, i tried replacing the power cable and it still does it. I can only access my computer if i unplug the pc from the back and plug it back in a few minutes later. I do have a 350 W psu which never did this problem which i could test, but does anyone know how I could perhaps avoid doing so?


Relevancy 49.02%

a few weeks ago my pc just kinda shut off randomly. i figured id ignore it couse it might have just been something weird...

it kept up pretty regularly and i decided that id format and reinstall vista
a little ways into this and it shut off again. it does it usually one or two times a day. (im on it usuall about 2 hrs or so.}

one of my friends said that it was probably a bad power supply.
could this be the problem or could it be the mobo or something?

A:is my power supply bad?

It could also be overheating. Open the system up and see how the fan and heatsink look. The heatsinks can get full of dust and sometimes the heatsinks can break or loosen off.

You can check the temps in the BIOS setup of the motherboard or using something like SpeedFan while runnign Windows:
Relevancy 49.02%

I cannont keep Power Supplies in my computer. I am running Win XP Athlon 1.4, 640mb ram (512 dimm 128 dimm), 40 gid Hard drive, Cd rom, DVD Drive, and Burner (yes I have all 3 filling up my drive bays). Could I be over stressing the power supply and buring them out? Had 200 watt origanally went to 250, and 300. All burnt out in about 6 months. Have ordered a replacement that is 400 watts. Is this enough power? Thanks

Relevancy 49.02%

My atx power supply fried. I put a ate power supply(i had one on hand) in. Now i get no post (no beeps). Does this mean yu can't switch power supplies or maybe some thing else got cooked?

Relevancy 49.02%

i just got a new power supply, i pulled it out of the box and before putting anything together i plugged it into the wall to see it power up, and see how the leds in it looked. i plugged it in and flipped the switch and nothing happened... is that normal? doesnt sound like it. heres the power supply:

thank you for any help!

Relevancy 49.02%

Just a quick question,I have a HP Pavilion xt983. and installed on it about 4 months ago NVidia Geforce 4 MX 64 MB Vid Card, 256 PNY Ram Stick. It worked fine for the last year I had it up until now when its starting to freeze up at random times. I looked inside of it and noticed it only has a 200 max Watt Power Supply. Could this be the issue? Thanks

Relevancy 49.02%

Hey guys i been having many problems when i try to play some games they all been crashing lately and everything is pointing to my PSU.

So i need to know if my Psu can hold all my hardware while playing heavy games on High settings, or if theres any software that can help me solving that. (srry for bad english)

My Specs:

OS:Windows 7 Ultimate x64

CPU: Intel Core I5-3330 3.00 ghz

Motherboard: H61M-A/BR

Memory: DDR3 1333mhz 8GB

Graphics Card: GTX 760

Sound: Onboard

Monitor(s) Displays: Samsumg B1930N

Hard Drives: an old 320GB Samsumg

PSU: Thermaltake Smart 550W

Cooling: 3 Cooling fans

Keyboard: A very cheap one

Mouse: Rappo V2

A:Need help with my power supply

Your graphics card is rated at 170 watts.

I think that Thermaltake is made by Channelwell. I couldn't find a review on it, but I've seen bad reviews for some Thermaltakes.

A 550 watt supply is certainly enough if it's a quality unit. I'd be suspicious of that PSU, but I can't find anything definitive about it.


Here's a review

which has this comment:

Bottom line: a no-nonsense power supply that is capable of powering most mid-range PCs for today and tomorrow.

The Good

Solid performance
Nice cabling
Attractive price

The Bad

Voltage regulation droops at extreme load

Here's another review:


3 Year Warranty
Good voltage regulation
Good modular cables
Relatively quiet
High Efficiency


Disappointing ripple suppression relative to competition
Poor Crossload performance – voltage droop and high ripple
Could benefit from more PCIe connectors
Read page 10 and make your own conclusions.
Relevancy 49.02%

I have a Dell Optiplex GX240 and I am looking into updating my graphics card. I have heard from several people that I have to have a certain amount of wattage in my power supply to run some of the graphics cards. Fow do I find out my computers power supply?
Thank you.

A:Power Supply

remove the side panel of your computer and look for a sticker that looks similar to this

the total wattage and the 12 volt amps are what you are looking for they are the ones marked +12v
Relevancy 49.02%


I have a Dell Inspiron 1100 laptop that's edging on three or four years old now. I just started having issues with the power supply. Something is wrong with it: my computer sometimes doesn't detect the power cable plugged into it and runs off of the batteries. I think that it might be loose somehow? If it's fixable, I'd like to know how, and if it isn't, it'd be great if someone could tell me where I ought to go to get it fixed.


Relevancy 49.02%

Will a 20 pin ps work in place of a 24 pin If not, what will not work properly? Thanks! I plugged the 20 pin into the 24 socket and everything seemed to work but no graphics? The graphics card gets it's power from the motherboard so, could the missing 4 pins be why I have no graphics on the monitor?

A:power supply 20 pin vs 24

Hello p5200,

It's not recommended to use a 20 pin PSU cable on a 24 pin motherboard power connector. It would be recommended to update your PSU to one that has a 24 pin power cable.

All about the various PC power supply cables and connectors

You can plug a 20 pin cable into a 24 pin motherboard and it will work just fine. At least, it will for a while. They added those extra 4 pins for a reason. When you plug a 20 pin cable into a 24 pin connector you're not providing the extra current carrying capacity which may be needed by the motherboard. If your motherboard's current requirements are low enough then it will work properly with only a 20 pin power cabled plugged in. But if the motherboard draws enough current, then you can overheat the 20 pins you're using on the 24 pin connector.

Hope this helps,
Relevancy 49.02%

Hi. I just found out after three years of owning the Inspiron 560 that I could install a second hdd. I proceeded to install it but the clip that connects the hdd broke. I have the PC attached to the second clip. Can I repair the primary clip(not the data cable) or do I need a new PSU. Where do I buy a PSU for the Inspiron 560? Any suggestions will be appreciated. deanie44

A:power supply

If the SATA power connector is broken, you can use a power "Y" cable from the good SATA power connector for both hard drives. That is is cheaper than buying a new power supply.

Here is a sample of what you need, from CLICK ME

Although you won't need a new power supply with the adapter cable, if you have the full size case model 560 and not the 560S model, it uses a standard ATX style power supply. If its the compact case model 560S, a TFX style power supply will fit.
Relevancy 49.02%

Does anybody have a evotec 400w lp-6100d aluminum Power supply? I Have one and was wondering if the fans have lights on them and how to turn them on.?

Relevancy 49.02%

My wife's Bad supply? power old IBM Netvista PIII Bad power supply? sits unused for weeks at a time When we go to boot up XP Pro the screen goes black after the POST It sits there locked up The reset or power switches do nothing I unplug it wait sec plug in and get the POST gt Then the usual windows message and options for restart Tried safe mode same result tried last known good config same thing Third try got faint short glimpse of XP logo Fourth try brighter for longer but then still went black Got interrupted and left it without selecting a restart option for hr and restarted perfectly Crashed in middle of AVG update download k modem Left at message screen for hr again worked perfectly afterwords Can repeat this sequence every bootup after a period of disuse I am suspecting a low power situation that gets better after the PS warms up but have not had a chance to replace it yet Do you think I am on the right track or should I be looking at other things Sorry for the long post but I find as a professional auto tech complete info is vital to problem solving

A:Bad power supply?

I think your on the right track. One of the most common things to happen is just strange errors with your computer. You may have software glitches, hardware, and any other act's of Satan. Some common symptoms of power supply problems.
Flickering and Dimming Lights
Keyboard or System lock-ups (Don't Blame Windows)
Random Shutdowns and Reboots
Relevancy 49.02%

I recently built a new computer and it has been running fine without any problems. Although, whenever I play games like BF4 or CSGO the exhaust fan at the back seems to slow down a bit and has a little bit of clicking. Is my power supply enough for these components?
Gigabyte R9 290 Windforce 3X
Intel core i7 4770 3.4 ghz
Asus Z87-C motherboard
8GB G-Skill RAM 1600Mhz
128GB SSD/640GB hard drive
700 Watt Cooler Master PSU
Zalman Z11 Case

A:Power supply not enough?

700 watts seems plenty to me
Relevancy 49.02%

I am building a machine with a BIOSTAR micro-ATX socket A board and a Duron 1.3 processor.

It will have one 60gig 5400rpm hard drive, a dvd-rom and no AGP/PCI cards.

Can I get away with a 200W PS?

Relevancy 49.02%

I have a HP Pavilion 7840 which has developed a loud fan noise. I have checked it out and it is the fan for the power supply. Do I have to replace the power supply or can the fan be replaced. I took out the four screws which hold the cover over the fan but the fan seems to be removable only if the power supply was removed from the computer and disassembled. I have cleaned the dust from the fan blades but this did not make a difference.

Relevancy 49.02%

My power supply does not work. The green light stays on then when I plug it back in the computer the light goes out. I purchased a similar power supply which the company said would work but it did not. Do I need to let the power supply charge for 24 hours? Any input will be greatly appreciated
Relevancy 49.02%

These are probably the stupidest questions in the world but I just bought this thing and the Use Manual wasn t in the box can t contact them until Monday about it so I have to ask as this is different from any power supply I ve used before apparently This is an older power supply I needed an ATX with the aux Help Power Supply power connector for my year model Gateway computer It s a Fortron FSP whatever http pcpartscollection com fspfs siled html power supply Well the first question is that black nob in the second picture It spins like a volume control nob one side is a the other a Power Supply Help - I m guessing it has Power Supply Help something to do with fan control Also there is no voltage switch Every power supply I have ever had has had one is there a reason there isn t one on this model I have to wait until Monday to contact them about my manual was hoping maybe someone here would know something I don t want to hook this thing up until I understand it nbsp

A:Power Supply Help

The black knob is the fan speed, and the power switch is right about the A/C connect, look a little closer. Looks like a standard P/S form-factor to me. FWIW, I've seen P/S models without the A/C switch, but pulling the cord out does the same job.
Relevancy 49.02%

I'm putting together a new system-
Asus P5B Deluxe WIFI motherboard
Core 2 Duo 6400
2 gigs corsair ram, 2 sata hard drives 250 gigs
Geforce 7900gs graphics card.

I'm looking at a Seasonic 500 watt power supply- is this enough? or do I need more?
Thanks for any input!

A:How much power supply do I need?

500W should work just fine although I'm not that familiar with Seasonic. When it comes to power supplies I try to stay with name bran such as Ante,Thermaltake and a few others
Relevancy 49.02%

Hi guys, been posting here for a while but unfortunately I am not a very active member.

I have a problem with this comp I bought from a friend. The problem is that sometimes, most often when I watch a movie or play a game, the power-supply starts to sound like a power-drill or something. It's really annoying and most often I can make it stop by rebooting, but sometimes that won't work. The power-supply is a chieftec of some power (dont know the exact number, but around 400w.) I don't really know if there are other hardware-related specs worth knowing, but I don't think it's a heating-issue as I have 2 chassi-fans that works well.

Of course, this must be the fan in the power-supply, but I don't know how to fix it or the essence of the problem. The computer is about 2 years old, an Athlon 3400+.

Any ideas?


Relevancy 49.02%

I was using my computer when suddenly, I heard a pop ,smelled smoke and my computer turned off. I knew it was the power supply , so I changed it. But computer turns on now but I get no beeps and computer does not boot up. My question is did this damaged anything else; I checked motherboard and cpu and I don't see any burnt spots.


Relevancy 49.02%

Under what conditions would you guys upgrade to a high power supply? I am building a computer, basically top of the line with a little bit of show to it...heh...and it's going to have about 4 fans and a neon light in it. Should I upgrade from a 350W PS to a 520 or something?


Relevancy 49.02%

I need a new power supply, because for the video card I bought, it requires 300W, and my current power supply is only 250W.

I'm just wondering, what do I have to look out for when buying?
I need a 4 pin cable to plug into my motherboard (Dell), and a cable for SATA drives.

I don't have a too big budget but if someone could suggest a model, or brand, etc that would be great!


Relevancy 49.02%

hi i have a packard bell 820 i put a new mother board in and ran fine for 1 month i had a problem with my floppy drive so i unplugged it and put in another turned on and nothing no lights no beeps dead. so i unpluged every thing and nothing i shorted the off on switch and nothing. do you think its the power supply? i took the ps out unplugged every thing and no fan dead??
if it is the ps how do i know what to buy to replace it it says it is 100 watt max
thank you chris

A:power supply

My computer had the same problem does any of the cd drives work??
if not then it sounds like the power supply has gone all you need to do is find a 100w power supply. I found that they can be very expensive so in the end i just brought a second hand computer
and took out the power supply.
Relevancy 49.02%

I just recently ordered a power supply off the Internet but when i put it in and reformatted my PC with windows XP it lags and when i try to open aim mirc etc power supply? and play music it acts like it power supply? struggles to try do both at the same time Or if i even try to watch a video and play a song If i open the internet and a song is playing it will either stop or just play the song really slow I don t think it s the audio driver im just trying to explain that it slows my comp down to do things at once My comp specs Windows XP home RAM AMD processer MB Nvidia video card The power supply is generic it s a powork- cost about Could a cheap power supply make my computer stuggle to do easy tasks I play games Like Day of Defeat and Counter-Strike and it plays those pretty well i have Norton Anti-virus so I m pretty sure i power supply? don t have a virus nbsp

Relevancy 49.02%

Hi everyone, i am new but have a serious question. I think I might have blown out my power supply when I connected my new hard drive. I think I may have touched the pin with the wrong connector and now my pc won't turn on.


A:power supply

Did you disconnect the hard drive in question?
Relevancy 49.02%

is an amd cpu dependent on the power supply wattage?
a technician claimed that a 145W ps would not run a 950mhz amd.

Relevancy 49.02%

OK I searched the board somewhat for my question but didn t see any results Yesterday we reeceived a used power supply - w to replace the old one that died in our Hp Pavilion xl So I of course start unplugging all the power supply connectors from the cd rom HD and so on I was able to get the new used one plugged back up to the motherboard but realized I didn t write a map up of where the other connectors Supply Power go s Now I m lost and can t find my answer out on the Power Supply net including the Hp site The Hp site only offers what to do if you re power supply is isn t working I need a diagram and would hope someone on here could help me please I had no problems installing a new hd in Power Supply this computer or switching out the memory but this time I m stumped Hopefully this helps This computer died two days after we bought our new one nbsp

A:Power Supply

Hello and welcome to TGS
Which leads do you need help with?
Relevancy 49.02%

I have a friends Ultra 500w power supply that has past the test for the plugs, but does make the light in any room or house flicker once when you plug in the power cord. The unit switch is turn off. The mother board is shot and I think maybe this might be the trouble maker.
I have never had one do this, so I thought I would put it out there to see what you think.

A:Power supply

sunnyeagle said:

I have a friends Ultra 500w power supply that has past the test for the plugs, but does make the light in any room or house flicker once when you plug in the power cord. The unit switch is turn off. The mother board is shot and I think maybe this might be the trouble maker.
I have never had one do this, so I thought I would put it out there to see what you think.Click to expand...
wtf you needa 500w for lol, 250-300w is fine for anything man. i would most def. say that the 500w power supply is your troublemaker. trash it or sell it and get you something smaller and more scaled to what you will be doing or what your friend will be doing
Relevancy 49.02%

OK i was wondering if any of you could help me out.
I currently have a 230v power supply for my pc. would i need to upgrade my power supply to support this hardware:

ATI Radeon 9600XT
2GB Ram
Pentium 4 3.0GHz HT

i do get VPU errors alot and lag in games. I was told getting a better power supply would resolve this.

A:New Power Supply

Check this site: put in your specs and it will tell you what you need!!
Relevancy 49.02%

My computer running Windows XP is having some intermittent problems and I think it may be the power supply but hope someone can tell me for sure When I turn it on the light on the front of the case goes on and I can hear the machine start the fan is on However I supply? power the Is this don t hear a beep and nothing actually happens The monitor light is orange and the screen is black I ll leave it alone for a while sometimes minutes sometimes minutes and all of a sudden I ll hear a beep and then Windows will be loading It runs fine after that - no sudden crashes etc This doesn t always happen - for the most part it starts fine But it happens enough to be bothersome I m not very knowledgeable in this Is this the power supply? area but have tried some very basic things new power cord different outlet etc I am wondering if I should try a new power supply and if so Is this the power supply? how do I know what type to buy Thanks for any help nbsp

Relevancy 49.02%

hello guppies,

I just bought an AT power supply, it has four wires (2 white, 2 black) that goes into power switch.
How do I connect them. Can anyone help? The old ps had four wires, 1 white, 1 black, 1 blue, and 1 brown. Does it really matter, where I connect them?

A:AT Power Supply

Hopefully you noted how(where) the old power leads attached to the switch, primarily the brown and black wires. Any how, connect one black wire to where the original black wire was attached. Connect the other black wire to where the brown wire was attached. Connect the two white wires to the remaining terminals. (one to where the blue wire attached and the other to where the white wire was attached).


Just so you'll know:

Brown = 120 Volt from power cord
Blue = Neutral for power cord
Black = 120 V from switch to power supply
White = Neutral for power supply

Hope this helps.

Relevancy 49.02%

I need to upgrade my power-supply for a new video card, but I have a question first.... can I buy pretty much any power-supply and it'll fit/screw in correctly? Or do I need to find one that matches my specific case (just an ordinary workstation)?

Sorry if that's a dumb question... I've never read that a case/supply incompatibility could happen, but I've never read they couldn't happen either. So if there is some standard that these things follow, please let me know.

Thanks in advanced for any help.

A:1 Power Supply fit all PCs?

there are different psu's fixings

is you box an ATX box - this is the most common self build box

if its a dell or HP etc they sometimes, use propriety kit

have a search for ATX PSU and see if it matches you PSU - do you have a make and model of PC
make model of PSU
Relevancy 49.02%

I feel as if my power supply isn't enough for my computer. My computer runs fine but sometimes when I'm viewing a web page or opening files on my computer I get a sort of staticky sound from my power supply. A while ago I upgraded my computer to handle the latest games. I had a power supply in it from my old setup, I think it was 300 Watt. After I got a new motherboard, processor, video card, RAM, etc, the power supply buzzed real loud like it couldn't give my PC enough power. So I upgraded to a Smartpower 2.0 480 Watt power supply. The buzzing went away... Almost. I can barely hear it sometimes, like I explained above. Is this normal?

Motherboard: Asustek A8v-E SE

Memory: 1gb

Video: Radeon X1600 Pro Sapphire Edition

Processor: AMD Athlon 64 3200+ 2.00 Ghz

A:Power supply

480W would power your current system fine. You could have a bad failing fan (bearings) in the power supply fan. You sure it is coming from the power supply?
Relevancy 49.02%

I was out of town all this past weekend. I was able to remotely connect to my computer on Saturday but during use, it disconnected me. When I returned home, machine was still one, two fans running, but that's it.

When I turned it off then back on, it doesn't boot, doesn't make that beep sound when you startup. Only two fans come on.

Brought it in to work today and a buddy says he thinks its the power supply because you can kind of smell that semi burnt smell coming from the back of the power supply.

Should I attempt to buy a new power supply without 100% knowing that it is the problem? Or should I just get a new computer? Thanks for your help in advance.

Relevancy 49.02%

I have an antec psu 2.0, 550w. cu crashed on hard landing from a power outage. pwr will not come back on. Any ideas/thoughts would be appreciated.

A:power supply

Is the PC's power line attached to a surge protector type power strip?
If so, there should be a reset button on it.

Also try unplugging the power cord from the PC for a few minutes.
Relevancy 49.02%

Ok my computer runs fine...when i can get it to start up. It will run all day with no problems, but then when i shut it off for the night something happens. I dont know why but when I go to start it up the next morning my fan runs really loudly then my computer shuts off and restarts and just sits there "running" with no activity on my monitor. Then, if i shut if off manually and start it back up it will run like normal. Every morning it does this and i can't figure out why. Do I just need to clean out my case of dust or replace my power supply or what?

Dell XPS 400
Geforce 6600 video card
2 X 512 MB RAM
Intel dual core 2.8 GHz
Soundblaster Audigy sound card

A:Is it the power supply?

The psu would be the first thing I would try.
Dell psu's are propriety so you just can't go to your local pc shop.
You either have to get one from Dell or there are online sites that sell compatible psu's.
Relevancy 49.02%

hi ive got heaps of atx power supplies and im trying to make them into lab supplies. ive followed about a million tutorials but at best ive had it running for about 5sec. the power supplies im using are 235W powerman FSP235-60GT. the wire colours are:
orange(4)- +3.3v
red(7)- +5v
yellow(4.... i may have cut some off for plugs on my pc supply) - +12v
white(1)- p.g signal
purple(1)- +5vsb
blue(1)- -5v
brown(1)- -12v
black(13)- ground
green(1)- not specified

ive been messing with them for months trying to get them to work ( i know they work in computers because they were taken from working computers) and im getting just a little tired of electric shocks...